•
•
•
ESPAÑOL FRANÇAIS ENGLISH
DVD Player
DV4003
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12.
Use only with the cart, stand,
tripod, bracket, or table specified by
the manufacturer or sold with the
apparatus. When a cart is used, use
caution when moving the
4. Follow all instructions.
cart/apparatus combination to avoid
injury from tip-over.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
7. Do not block any ventilation openings.
Install in accordance with the
14. Refer all servicing to qualified service
personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
manufacturer´s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety
purpose of the polarized
15. Battery usage CAUTION – To prevent
battery leakage which may result in bodily injury,
property damage, or damage to the unit:
or grounding-type plug.
A polarized plug has two
blades with one wider
than the other.
AC Polarized
Plug
ꢀ
ꢀ
ꢀ
Install all batteries correctly, + and – as marked on
the unit.
A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Remove batteries when the unit is not used for a
long time.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
16. Apparatus shall not be exposed to dripping
or splashing.
17. Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted
candles).
11. Only use attachments/accessories specified
by the manufacturer.
18. This product may contain lead and mercury.
Disposal of these materials may be regulated due to
environmental considerations.
For disposal or recycling information,
please contact your local authorities or the
Electronic Industries Alliance :
EL 6475-E005: 04/01
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Additional Safety Information!
- When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules that
apply in your country or area.
•
This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been
adhered to.
- Do not place anything about 0.1 meter above
the top panel.
•
Apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
When the switch is in the OFF position, the apparatus
isn’t completely switched-off from the MAINS.
- Make a space of about 0.1 meter around the
unit.
•
- No objects filled with liquids, such as vases,
shall be placed on the apparatus.
FCC NOTE (for U. S. A only):
- When the switch is in the OFF position, the
equipment is not completely switched off from
MAINS.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radi-
ate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures.
- The equipment shall be installed near the
power supply so that the power supply is
easily accessible.
WARRANTY
For warranty information, contact your local Marantz dis-
tributor.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and re-
ceiver.
RETAINYOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valua-
ble purchase. It should be kept in a safe place to be referred
to as necessary for insurance purposes of when corre-
sponding with Marantz.
•
•
Connect this equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
IMPORTANT
NOTE: Changes or modifications may cause
this unit to fail to comply with Part 15 of the
FCC Rules and may void the user’s authority to
operate the equipment.
When seeking warranty service, it is the responsibility of the
consumer to establish proof and date of purchase. Your pur-
chase receipt or invoice is adequate for such proof.
FOR U.K. ONLY
This Class B digital apparatus complies with
Canadian ICES-003.
This undertaking is in addition to a consumer’s statutory
rights and does not affect those rights in any way.
Disc Storage
Be careful not to harm the disc because the data on these
discs is highly vulnerable to the environment.
Cet appareil numérique de la Classe B est
conforme á la norme NMB-003 du Canada.
•
•
•
•
Do not keep under direct sunlight.
Keep in a cool ventilated area.
Store vertically.
This product satisfies FCC regulations when shielded cables
and connectors are used to connect the unit to other equip-
ment. To prevent electromagnetic interference with electric
appliances, such as radios and televisions, use shielded
cables and connectors for connections.
Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord
from the AC outlet.
CE marking (for Europe only)
•
Do not use benzene, thinner, or other solvents for clean-
This product is in conformity with the
EMC directive and low-voltage directive.
ing.
•
Wipe the cabinet with a soft cloth.
WARNINGS
- Do not expose the equipment to rain or
moisture.
A NOTE ABOUT RECYCLING
This product’s packaging materials are
recyclable and can be reused. This product
and the accessories packed together are the
applicable product to the WEEE directive except
batteries.
- Do not remove the cover from the equipment.
- Do not insert anything into the equipment
through the ventilation holes.
Please dispose of any materials in accordance
with your local recycling regulations.
When discarding the unit, comply with your local
rules or regulations.
- Do not handle the mains lead with wet hands.
- Do not cover the ventilation with any items
such as tablecloths, newspapers, curtains, etc.
Batteries should never be thrown away or
incinerated but disposed of in accordance with
your local regulations concerning chemical
wastes.
- No naked flame sources, such as lighted
candles, should be placed on the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Table Of Contents
6
7
DVD Setup Menu
1
Before You Start
Setting up the GENERAL SETUP page.......................34
Setting up the AUDIO SETUP page............................37
Setting up the VIDEO SETUP page.............................39
Setting up the PREFERENCE page ..............................44
Features............................................................................... 6
What’s in the box .............................................................. 7
Putting the batteries in the remote control................. 7
Using the remote control................................................ 7
DVD-Video regions ........................................................... 7
Discs compatible with this player.................................. 8
General Information for MP3/WMA/JPEG/DivX....... 9
MP3 compatibility information...................................... 9
WMA compatibility information..................................... 9
JPEG compatibility information...................................... 9
DivX compatibility information...................................... 9
Additional Information
Language Codes..............................................................47
Handling discs..................................................................48
Storing discs.....................................................................48
Discs to avoid...................................................................48
Cleaning the pickup lens ...............................................48
Problems with condensation ........................................48
Hints on installation .......................................................49
Moving the player ...........................................................49
Precautions on using the power cord.........................49
Troubleshooting ..............................................................50
2
3
4
Connecting Up
Easy setup......................................................................... 10
Home theater video connections.................................11
Home theater audio connections................................ 12
Frequently Asked Question (USB)..............................52
Specifications...................................................................53
Controls & Displays
Front panel ....................................................................... 13
Display............................................................................... 13
Remote control................................................................ 14
Getting Started
Playing discs..................................................................... 15
Basic playback controls ................................................. 16
Resuming playback from the last stopped point...... 16
Navigating DVD disc menus.......................................... 17
Navigating Video CD PBC menus................................ 17
5
Playing Discs
Introduction ..................................................................... 18
Fast Forward/Fast Reversed........................................... 18
Still Frame/Slow Play/Frame Advance
Playback ............................................................................ 19
Using the Repeat Play....................................................20
Looping a section of a disc...........................................21
Using the Random (SHUFFLE) Play ............................21
Switching Camera Angles ..............................................22
Switching the Subtitle Language.................................22
Switching the Audio Language ..................................23
Switching the Audio channel........................................23
Using the Zoom Function .............................................23
Preview function ..............................................................24
Play back Information.....................................................25
Playing a MP3/DivX/JPEG/
Playing MP3/W™MA music and JPEG
Windows Media Audio disc........................................27
Playing a JPEG image file (slide show)........................28
pictures simultaneously .................................................29
Playing a DivX disc..........................................................30
USB operation .................................................................31
Using the Setup Menu...................................................32
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
1
Before You Start
3
Features
MP3 and WMA*
compatibility
This player is compatible with CD-R, CD-
RW and CD-ROM discs that contain MP3
and WMA audio tracks (see pages 27, 29).
USB Operation
You can play or view the data files (JPEG,
®
MP3, WMA, or DivX ) in the USB flash
drive.
JPEG compatibility
This player is compatible with CD-R, CD-
RW and CD-ROM discs that contain JPEG
data (see pages 27, 28, 29).
CD Ripping
This feature allows you to convert audio
tracks from an audio CD into MP3 format.
The created MP3 files are saved in your
USB device.
1
*
*
*
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
1
An HDCP-compatible HDMI*
2
3
“DivX”, and “DivX Ultra” Certified, and associated
logos are trademarks of DivX, Inc. and are used
under license.
terminal is provided to ensure the
very highest picture and digital sound
quality by fully digital transmission.
This unit is equipped with an HDCP-
compatible digital image output terminal
(HDMI) to provide copyright protection.
Windows Media and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
Direct digital transmission without analog
conversion of DVD image data makes it
possible to enjoy real-life images without
any image deterioration resulting from
AD/DA conversion. The unit has also been
designed to make it possible to handle
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
the transmission of both digital video and
digital audio with a single connector.
High quality 12-bit/108 MHz video
D/A converter
“DTS” and “DTS Digital Out” are registered
The unit uses a video D/A converter that
trademarks of DTS, Inc.
performs D/A conversion of all video
signals in 12 bits and can perform 4x over-
sampling to let you enjoy beautiful video
possible with DVD.
High quality 24-bit/192 kHz DAC
The high specification 24-bit/192 kHz DAC
delivers dynamic, smooth and expansive
analog sound from CDs and DVDs.
recorded on DVD R/RW or2CD-R/RW.
DivX
*
®
®
You can enjoy DivX files which are
®
• Official DviX Ultra Certified product
• Plays all versions of DivX video
®
(including DivX 6) with enhanced
®
playback of DivX media files and the
®
DivX Media Format
• This player supports Quarter Pixel.
• This player does not support GMC.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Before You Start
1
What’s in the box
Using the remote control
Thank you for buying this MARANTZ
Keep in mind the following when using the
remote control:
product. Please confirm that the following
accessories are in the box when you open
•
•
Make sure that there are no obstacles between
the remote control and the remote sensor on the
unit.
it.
•
•
•
•
•
•
•
Remote control
Use within the operating range and angle, as
AAA/R03 dry cell batteries x2
Audio/Video cable (yellow/red/white)
System control cable (USA only)
Power cable
shown.
5m (16 feet)
30
30
User Guide (this manual)
Warranty card (USA only)
•
•
•
Remote operation may become unreliable if
strong sunlight or fluorescent light is shining on
the unit’s remote sensor.
Putting the batteries in the remote
control
Remote controllers for different devices can
interfere with each other. Avoid using remotes for
other equipment located close to this unit.
1
2
Open the battery
compartment cover on
the back of the remote
control.
Replace the batteries when you notice a fall off in
the operating range of the remote control.
Note (USA only)
•
When using this player independently, set the
REMOTE CONTROL switch on the rear panel to
INT. (INTERNAL) (see page 10).
Insert two AAA/R03
batteries into the battery
compartment following
ª ·
the indications (
,
)
DVD-Video regions
inside the compartment.
Close the cover.
3
Note
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
•
•
Don’t mix new and old batteries together.
Don’t use different kinds of battery together.
Although they may look similar, different batteries
may have different voltages.
All DVD-Video discs carry a region mark
on the case somewhere that indicates
which region(s) of the world the disc is
compatible with. Your DVD player also has
a region mark, which you can find on the
rear panel. Discs from incompatible regions
will not play in this player. Discs marked
ALL will play in any player.
•
•
Make sure that the plus and minus ends of each
battery match the indications in the battery
compartment.
Remove batteries from equipment that isn’t going
to be used for a month or more.
When disposing of used batteries, please comply
with governmental regulations or environmental
bylaws that apply in your country or area.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
1
Before You Start
*This unit can play CD-R and CD-RW discs recorded
in Audio CD or Video CD format, or with MP3 audio
files or Windows Media audio files or picture files or
DivX files.
Discs compatible with this player
Any disc that displays one of the following
logos should play in this player. Other
formats, including DVD-RAM, DVD-ROM,
CD-ROM (except those that contain MP3/
*Some copy-controlled CDs may not conform to
official CD standards. They are special discs and may
not play on the DV4003.
DivX/WMA/JPEG files) and Photo CD will
not play.
*The DV4003 does not support the non-DVD side
of a Dual Disc.
DVD-Video compatibility:
Video CD compatibility:
•
Logos:
•
Logo:
MPEG-1 digital video
•
•
•
Single-sided or double-sided discs
•
•
•
12cm (5in.) or 8cm (3in.) discs
Single layer or dual layer discs
MPEG-1 digital audio
Dolby Digital, DTS, MPEG or Linear PCM digital
audio
Video CDs are divided into tracks.
•
MPEG-2 digital video
Discs are generally divided into one or more titles.
Titles may be further subdivided into chapters.
Super VCD compatibility:
•
Logo:
DVD-R compatibility:
•
•
•
12cm (5in.) or 8cm (3in.) discs
MPEG-1 digital audio
This unit can play DVD-R discs. Please note the
following points when using these discs:
MPEG-2 digital video
•
Logo:
Super VCDs are divided into tracks.
•
This unit can play DVD-R discs recorded as DVD-
Video format.
DVD-RW compatibility:
This unit can play DVD-RW discs. Please note the
following points when using these discs:
•
Logo:
•
This unit can play DVD-RW discs recorded as
DVD-Video format, and DVD-VR format.
•
DVD-RW discs that were recorded with copy-
once only permission can be played.
DVD+R/+RW compatibility:
•
Logo:
•
This unit can play DVD+R/+RW discs. Please
note the followings points when using these
discs.
Audio CD compatibility:
•
Logos:
•
•
•
12cm (5in.) or 8cm (3in.) discs
Linear PCM digital audio
Audio CD, CD-R* and CD-RW* formats
CDs are divided into tracks.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Before You Start
1
•
•
Always be sure to specify a file extension of “.JPG”
General information for
MP3/WMA/JPEG/DivX
or “JPEG” for JPEG files. The file will not be able
to be displayed if a file extension other than “.JPG”
•
•
•
•
This player can recognize in total about 650 files
or “JPEG” is specified or if no file extension is
per folders and 300 folder per disc for MP3/
assigned to the file. (Note that this means that
DivX/WMA.
JPEG files created on a Macintosh will not be able
to be displayed as is.)
When writing MP3/WMA/JPEG/DivX files to CD-
R/RW discs, always be sure to set the writing
Depending on the file size and compression
format to ISO 9660 Level 1.
ratio, some JPEG pictures cannot be displayed
correctly.
For MP3 and WMA files recorded in Variable Bit
Rate (VBR), the unit may not display the actual
Maximum supported JPEG resolution are shown
below:
elapsed time.
For, MP3 and WMA, this player is not compatible
•
For baseline JPEG, the supported maximum
resolution is 3072 x 2048
with multi-session discs. If you try and play a
multi-session disc, only the first session will be
played.
•
For progressive JPEG, the supported maximum
resolution is as shown:
Width x (Height + 128) < 3300000
MP3 compatibility information
•
•
Files should be MPEG1 Audio Layer 3 format.
The sampling rate is 11 kHz to 48 kHz, but it is
depends on the bit rate. Incompatible files will
not play.
DivX compatibility information
•
•
•
A file with an extension of “.avi” or “.divx” is called
a DivX file.
Maximum 30 characters can be displayed on TV
screen.
Audio encoded at 128 kbps should sound close
to regular audio CD quality. Although this player
will play 32 kbps to 320 kbps, but it is depends
on the sampling rate.
File should be MPEG1 Audio Layer 3 format and
MPEG2 format.
•
•
•
Support for DivX 3.11, 4.x, 5.x, 6.x and Ultra.
•
This player is compatible with ID3 ver.1.1 Tag.
Q-pel accurate motion compensation.
•
Maximum 30 characters can be displayed on TV
screen.
Global Motion Compensation (GMC) Playback.
•
•
This player cannot play DVD-R/RW discs with
recorded MP3 music data.
Caution!
•
•
DVD R/RW and CD-R/RW discs recorded using
This player only plays tracks that are named
a personal computer or a DVD or CD recorder
containing the file extension “.mp3” or “.MP3”.
may not play if the disc is damaged or dirty, or if
there is dirt or condensation on the player’s lens.
WMA compatibility information
If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
•
The sampling rate is 44.1 kHz (bit rate: 64
kbps-192 kbps) and 48 kHz (bit rate: 128
kbps-192 kbps).
•
•
This player only plays tracks that are named with
the file extension “.wma” or “.WMA”.
•
There may be times when it is impossible
to replay a CD-R/RW disc because of the
characteristics of the disc being used or because
of dirt or scratches on the disc.
This player can not play the disc contents
protected by Windows Media Digital Right
Management (DRM).
•
•
•
Unfinalized DVD-R/RW discs cannot be played.
Unfinalized CD-R/RW discs cannot be played.
JPEG compatibility information
•
While this player is designed to be able to
handle image data recorded in JPEG format,
no assurances are given that the player will be
able to display image data recorded in all JPEG
formats.
For more information on using DVD-R/RW and
CD-R/RW discs, see “Handling discs” on page
48.
•
Never try to replay anything other than a music
CD (CDA format) or a CD-R/RW on which MP3
•
•
This player can display progressive JPEG images.
and/or JPEG files have been stored. Depending
This player can display HD JPEG images.
on the type of file, there may be times when
doing so will result in problems or erroneous
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
2
Connecting Up
Easy setup
Important
While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
This easy setup is the minimum set of
connections you need to start watching
DVD-Video discs. Both sound and picture
•
•
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
are fed directly to your TV using the
supplied audio/video cables. For other
possible connections, see pages 11 and 12.
Connect to a composite video
See Note:
1
INT. EXT.
input on your TV using the
supplied Audio/Video cable.
Remote Switch
(for USA only)
CR/PR
AUDIO
REMOT
CONTROL
Y
VIDEO
S1
IN
L
INT. EXT.
OUT
R
CB/P
B
DIGITAL
A/V EUROCONNECTOR
AC IN
HDMI
ANALOG COAX. COMPONENT
Connect to a pair of stereo audio
Plug into a standard
AC wall outlet.
2
3
inputs on your TV using the
supplied Audio/Video cable.
Connecting audio/video cables
Note
Be sure to insert each
•
•
When connecting to a standard TV, select
plug fully for the best
4:3 LETTER - BOX or 4:3 PAN SCAN in the TV
Aspect setting (see page 40).
connection. The plugs
and jacks are color-coded
to make connection
easier.
Connect the video output of the player directly
to your TV. Because the player is designed to
support an Analog Protection System copy card,
there are cases when proper playback will be
not be possible if the player is connected to the
TV through a VCR and images are recorded and
played on the VCR.
Connecting system control cables
(USA only)
•
•
The player’s video output and S1 output are not
By connecting this DVD player to another
Marantz audio component using a supplied
system control cable, you can remotely
operate the components as a single system.
be progressive.
Remote switch (USA only)
When using this DVD player independently, set
this switch to INT. (INTERNAL). When using this
DVD player in a system with a Marantz receiver
equipped with a remote sensor, set the switch to
EXT. (EXTERNAL).
•
•
When connecting to a component with a
remote sensor, be sure to connect the REMOTE
CONTROL IN jack of this DVD player to
the REMOTE CONTROL OUT jack of the
component with the remote sensor.
When connecting to component which is
not equipped with a remote sensor, be sure
to connect the component to the REMOTE
CONTROL OUT jack of this DVD player.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Connecting Up
2
Home theater video connections
This player outputs video in a number
of different ways. Choose the one most
suitable for your system using the guide
below.
Important
•
•
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
If your TV has a component video input, we
If your TV has a SCART input, we
1
recommend using it to connect directly to the
recommend using it to connect directly
COMPONENT VIDEO OUT of this player. Use
to the A/V EURO CONNECTOR on
the standard 3-jack component video output.
this player. (for Europe only)
CR/PR
AUDIO
REMOTE
CONTROL
Y
VIDEO
IN
L
INT. EXT.
OUT
R
S1
CB/P
B
DIGITAL
A/V EUROCONNECTOR
AC IN
HDMI
ANALOG COAX. COMPONENT
If your TV and projector have
If a component input is not
Plug into a standard
AC wall outlet.
2
4
3
a HDMI terminal for Video and
available to you, connect this
Audio Input, we recommend
player to your TV or AV receiver
using it to connect directly to
the HDMI out of this player.
using either the VIDEO or S1
jacks.
Connecting HDMI cables
Connecting SCART (for Europe only)
With an HDMI cable, both uncompressed
video data and digital audio data (e.g.,
LPCM or bit stream data such as Dolby
Digital, DTS, or MPEG data) can be
transmitted with just a single connector.
and S-Video cables
SCART and S-Video cables will only plug in
one way, so make sure the plug is correctly
lined up with the jack before inserting. Be
sure to fully insert for a good connection.
By transmitting DVD image data directly as
digital data without it being first converted
into analog format, it becomes possible to
provide the very finest in image quality (see
pages 38, 42-43).
Note
•
The A/V EURO CONNECTOR can output
composite or RGB component video. If you
connect just one TV, use the A/V EURO
CONNECTOR. You can select the type of video
output by changing the COMPONENT setting in
the DVD Setup Menu (page 41).
Note
•
The HDMI output of this unit can be connected
to a DVI jack on a TV or other device using a
S-Video or composite video?
S-Video should give a better picture, so if
you have an S-Video input, use it. S-Video
cables are available from any good audio/
visual dealer.
conversion adapter. In this case, it is necessary
to use a TV or display with an HDCP-compatible
DVI input.
•
•
•
There may be no image output if connected to
a TV or display that is not compatible with the
above format.
Refer to the instruction manual of the TV or
display to be connected to this unit for detailed
information regarding the HDMI terminal.
When connecting a progressive input TV with the
component output of the player, select ON in
the Progressive setting (see page 40).
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
2
Connecting Up
Home theater audio connections
This player outputs multi-channel audio
in digital form. Check the manual for your
amplifier/receiver to see what equipment it
is compatible with (especially which digital
formats such as Dolby Digital, DTS, etc. It
can decode).
Important
While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
•
•
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
If your amplifier has stereo
1
inputs only, connect them here.
CR/PR
AUDIO
REMOTE
CONTROL
Y
VIDEO
S1
IN
L
INT. EXT.
OUT
R
CB/P
B
DIGITAL
HDMI
A/V EUROCONNECTOR
AC IN
ANALOG COAX. COMPONENT
Plug into a standard
AC wall outlet.
Connect to the coaxial input
3
2
of your amplifier, if it has
digital inputs.
Connecting analog audio cables
Be sure to fully insert each plug for the
best connection. The plugs and jacks are
color-coded to make connection easier.
Connecting coaxial cables
Use an interconnector with a pin-type
(also called RCA
COAX
or phono) plug on
each end to connect
up digital coaxial-
type jacks. Make
sure that the plug is
pushed fully home.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Controls & Displays
1
3
Front panel
2
3 4 5 6
STOP
OPEN/CLOSE
DVD PLAYER DV4003
PROGRESSIVE SCAN
PLAY/PAUSE
/
STANDBY
/
POWER ON/STANDBY
AUDIO EX
USB
7
8
9 0
-
1
2
3
STANDBY indicator
7
POWER ON/STANDBY
•
Lights when the unit is in standby.
•
Press to turn the power on, and press it again to
enter STANDBY mode.
Disc tray
8
9
Display
•
Place the disc here.
•
Operation indications are displayed here.
§
(STOP/OPEN/CLOSE)
AUDIO EX indicator
•
Stops playing the disc play.
•
Press to open and close the disc tray when stop
•
•
Lights when the AUDIO EX is activated using the
mode.
AUDIO EX button on the remote control.
The sound quality of analog audio output is
improved by turning off analog video signal
output and the front panel display.
6
4
(PLAY/PAUSE)
•
Begins playing the disc play.
•
Pauses playing the disc play, when playing.
•
It is applied to CDDA, Super Audio CD (CD
4 1
5
/
Layer) and DTS CD in Play mode.
•
Press to skip reverse title, chapter, or track. You
10 USB indicator
can also press and hold this button for Fast
•
•
Lights when the USB function is activated.
Reversed.
11
(USB) Jack
¡ ¢
6
/
Input for USB flash drive.
•
Press to skip forward title, chapter, or track.
You can also press and hold this button for Fast
Forward.
Display
2
3
HDMI
PRGSV
1
1
2
Character display
HDMI indicator
•
When the connected device is HDMI/DVI
compatible, the light flashes red.
3
PRGSVE indicator
•
Lights when unit is outputting progressive scan
(non-interlaced) video.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
3
Controls & Displays
1
5
REPEAT – pages 20, 27
Remote control
A–B – page 21
6
7
ANGLE – pages 22, 41
% fi
INPUT ( / ) button – These buttons
can switch between devices compatible
with Marantz receivers. Refer to the receiver
instruction manual for further details.
2
3
4
!
@
#
•
Applicable models: PM-11S1, PM-15S1,
5
$
PM6001, PM7001, PM8001, SR9600.
(These models may not be handled depending on
the area.)
6
%
^
Non-applicable models: MARANTZ Amplifiers
and receivers which had released before 2006,
including PM-14, PM-17 and PM4001 except
above models.
&
7
8
*
(
)
_
4
¢
8
9
(PREV.)/
(NEXT)– Skip – pages
16, 17, 18, 27, 28, 36, 46
•
Allows you to search forward/backward through a
9
0
disc. Use to skip the title, chapter or track.
Press and hold (4) for Fast Reversed.
Press and hold (¢) for Fast Forward.
•
•
+
SCAN – page 24
-
=
10 TOP MENU (TOP-M)/RETURN – page 17
2 3 5 ∞
11 Cursor (
/
/
/ ) / ENTER button
¡
™
12 DISPLAY (DISP.) – page 25, 26
13 DISC SKIP – Selects USB mode. – page 31
14 POWER – Switches the player on or into
standby – page 15
15 SOUND MODE– It is not used on this set.
16 PAGE – It is not used on this set.
~
17 RANDOM – page 21
18 AUDIO – pages 23, 35, 40, 41
19 SUBTITLE – pages 22, 30
5 ∞
20 VOLUME ( / ) button – These buttons
can adjust the volume of devices compatible
with Marantz receivers. Refer to the receiver
instruction manual for further details.
21 MUTE button – This button can activate
the mute function of devices compatible
with Marantz receivers. Refer to the receiver
instructions for further details.
1
2
AUDIO EX – Press to turn AUDIO EX off
and on
•
The sound quality of analog audio output is
improved by turning off analog video signal
output and the front panel display.
3
22
(PLAY) – pages 15, 16, 18, 19, 27, 28,
•
HDMI video output cannot be switched off.
29, 30, 34
OPEN/CLOSE – Disc tray open/close –
8
23
24
(PAUSE) – pages 16, 19
pages 15, 40, 41
7
(STOP) – pages 16, 28, 29, 31, 32
3
4
ZOOM – page 23
25 MENU – page 17
HDMI – page 42
26 SETUP – pages 32, 34, 37, 39, 44
•
•
The HDMI on/off state toggles when pressed
27 Number buttons – pages 16, 17
for three seconds or more. When on, the HDMI
indicator is lit.
Pressing this button while HDMI is
enabled displays the current resolution.
Pressing this button again while the
resolution is displayed allows you to select
the resolution in the sequence below:
480p 576p 720p 1080i 1080 p
Note
•
•
HDMI ON is set when the unit is shipped from
the factory.
Set HDMI under the DVD Setup Menu to use
HDMI functions (see pages 38, 42-43).
Æ
Æ
Æ
Æ
Æ
480p
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Getting Started
4
Playing discs
The basic playback controls for playing
discs are covered here. Further functions
are detailed in the next chapter.
Note
•
Throughout this manual, the term “DVD” means
DVD-Video, and DVD R/RW. If a function is specific
to a particular kind of DVD disc, it is specified.
1
Press the POWER ON/STANDBY button
on the front panel or POWER button on
the remote control.
If you are playing a DVD or Video CD, also turn on
your TV and make sure that it is set to the correct
video input.
§
2
3
Press
(STOP/OPEN/CLOSE) on the
0
front panel or (OPEN/CLOSE) on the
remote control to open the disc tray.
Load a disc.
Load a disc with the label side facing up, using the
disc tray guide to align the disc (if you’re loading
a double-sided DVD disc, load it with the side you
want to play face down).
6
4
Press
(PLAY/PAUSE) on the front
3
panel or (PLAY) on the remote control
to start playback.
If you are playing a DVD or Video CD, a menu may
STOP
OPEN/CLOSE
appear (see page 17).
PLAY/PAUSE
/
/
Note
AUDIO EX
USB
•
•
For one-sided, two-layer discs containing movies, etc.,
there may be a short image stoppage at the point
where the layers change. This is not a malfunction.
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
4
Getting Started
Basic playback controls
Resuming playback from the last
stopped point
Button
What it does
3
Starts playback.
This DVD system is able to resume disc
playback from its last stopped point (only
possible for the last 10 discs that were
recorded without a menu).
(Remote Control) In title menu, it functions as the Enter
key.
8
Pauses a disc that’s playing.
(Remote Control) Each time the button is pressed, a new
frame will appear.
1
2
Load one of the last 10 discs played.
7
Stops playback.
(Remote Control)
While “LOADING” appears on the display
6
•Starts playback when stop mode
•Pause a disc that's playing
3
start playback from
panel, press PLAY to
(Front panel)
§
•Stops playback that’s playing
the last stop point.
(Front panel)
•Open the disc tray when stop mode
4
Skips to the start of the
•
To cancel the resume mode
current track or chapter, then
7
•
Press twice.
to previous tracks/chapters.
Press and hold for Fast Reversed.
•
¢
Skips to the next track or chapter.
•
Important
Press and hold for Fast Forward.
•
While using the DVD playback controls, you may see
Numbers
ENTER
Playback starts from the selected track/
chapter number.
the
mark displayed on-screen. The
mark means
that the operation is not allowed by the player and
disc.
Select the current menu option.
Note
•
DVD-VR (Video Recording) format, MP3, DivX and
USB device don't allow Resuming playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Getting Started
4
Navigating DVD disc menus
Many DVD discs contain menus. Sometimes
these are displayed automatically when you
start playback; others only appear when you
press MENU or TOP-M.
Button
TOP-M
What it does
Displays the “top menu” of a DVD disc.
This varies with the disc.
MENU
Displays a DVD disc menu—this varies
with the disc and may be the same as the
“top menu”.
RETURN
Returns to the previously displayed menu
screen.
Cursor
Moves the cursor around the screen.
2 3 5 ∞
(
/
/
/
)
ENTER
Selects the current menu option.
Numbers
Selects a numbered menu option
(some discs only).
Navigating Video CD PBC menus
Some Video CDs have menus from which you
can choose what you want to watch. These
are called PBC (Playback control) menus.
Press the MENU to turn the PBC function on
or off.
Note
•
Some discs don’t allow PBC menus.
Button
What it does
RETURN
Numbers
ENTER
4
Displays the PBC menu.
Selects a numbered menu option.
Selects the current menu option.
Displays the previous menu page
(if there is one).
¢
Displays the next menu page
(if there is one).
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
5
Playing Discs
Fast Forward/Fast Reverse
DVD-Video
DivX
Video-CD
CD
MP3
WMA
The video images on DVD and VCD can be
viewed as a Fast Forward and Fast Reverse
with no sound.
In case of CD, the sound can be listened as a
Fast Forward and Fast Reverse with sound.
Viewing in Fast Forward/Fast Reversed
¢
Press and hold
(NEXT) during play.
• Fast Forward is engaged.
• During Fast Forward, the speed of play
back can be adjusted from x2 speed to
¢
x32 speed in 5 steps using
(NEXT).
4
Press and hold
(PREV.) during play.
• Fast Reverse is engaged.
• During Fast Reverse, the speed of play
back can be adjusted from x2 speed to
4
x32 speed in 5 steps using
(PREV.).
3
To return to normal play back press (PLAY)
to normal play back.
Note
•
The sound is muted during fast forward/reverse
scanning of DVD/VCD.
•
For DivX only, during Fast Forward/Fast Reverse, the
speed of play back can be adjusted from Scan1 to
¢
4
Scan5 in 5 step using
(NEXT)/
(PREV.).
Introduction
• Many of the functions covered in this
chapter apply to DVD discs, Video CDs
and CDs, although the exact operation
of some varies slightly with the kind of
disc loaded.
• When playing DVD discs, if the icon
appears on-screen when you try to use
a particular function, either the player
or the disc doesn’t allow the use of that
function.
• When playing Video CDs, some of the
functions are not available in PBC mode.
If you want to use them, press the
MENU to turn the PBC function off.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Playing Discs
5
Viewing a Paused Picture
8
Press (PAUSE).
Viewing slow playback
With this function, DVDs can be viewed in both forward
and reverse direction. Video CD can only be moved in
the forward direction.
∞
Press (down) during play.
•
•
Slow playback is engaged.
During slow playback, the speed of playback can
be adjusted from 1/2 normal playback speed to
1 normal playback
1/2 1/4 1/8 1/16
1
speed in 5 steps using
∞
(down).
5
Press (up) during play.
•
•
Slow playback in the reverse direction is engaged.
During slow playback, the speed of playback can
be adjusted from 1/2 normal playback speed to
1 normal playback
1/2 1/4 1/8 1/16
1
speed in 5 steps using
5
(up).
To return to normal playback
When the picture is paused or during slow playback,
3
pfrreasmsineg at(aPLtAiYm) erestores normal playback operation.
Step Motion playback: Viewing one
With this function, DVDs and Video CDs can only be
moved in the forward direction.
8
Press (PAUSE).
Each time the button is pressed, a new frame will
appear.
To return to normal playback
3
When viewing Step Motion playback, pressing (PLAY)
restores normal playback operation.
Note
•
•
There is no sound picture playback is paused or
during slow playback, or when advancing one frame
at a time.
Still Frame/Slow Play/Frame Advance
Playback
DVD-Video Video-CD
Pausing picture, slow play, or Step Motion playback
may not be possible with certain titles. In this case,
The video images on DVD and Video CD
can be viewed as a still frame, played back
at slow speeds and even advanced frame by
frame (Forward only).
the
mark is displayed.
•
A short sound may be noticeable when switching to
slow playback.
8
•
When you press the (PAUSE) button during slow
playback, it may advance a few frames past the
frame where you want it to stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
5
Playing Discs
Using the Repeat Play
DVD-Video Video-CD
CD
MP3
JPEG
DivX
WMA
You can set the player to repeat individual
tracks on CDs or Video CDs, chapters or
titles on DVD discs, or the whole disc. It’s
also possible to loop a section of a disc.
You can’t use any repeat mode or looped
play with a Video CD playing in PBC mode.
Press REPEAT during playback to select a
repeat mode.
Each press switches the repeat mode:
DVD-Video
•
•
•
•
CHAPTER REPEAT
TITLE REPEAT
ALL REPEAT
OFF
Video-CD
CD
TRACK REPEAT
ALL REPEAT
•
•
•
REPEAT OFF
MP3
JPEG
DivX
WMA
•
•
•
REPEAT ONE (repeat track)
REPEAT FOLDER
OFF
Note
•
Any existing RANDOM or Repeat A-B mode will be
cancelled and Repeat mode will be activated.
•
Some discs don’t allow the Repeat function.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Playing Discs
5
Looping a section of a disc
DVD
Video-CD
CD
MP3
DivX
1
2
Press A-B once at the start of the section
you want to repeat, then again at the end.
Playback immediately jumps back to the start point and
plays the loop round and round.
•
On a DVD disc, the start and end points of the
loop must be in the same title/chapter.
•
On a Video CD/CD disc, the start and end points
of the loop must be in the same track.
To resume normal playback, press A-B
again.
Note
•
•
There may be a slightly difference between point A
and the location where playback actually resumes
depending on the disc.
After Repeat A-B is exited, any existing Repeat or
UsRinAgNDtOhMe mRoadnesdwoilml be(rSesHtoUreFd.FLE) Play
DVD-Video Video-CD
CD
MP3
DivX
WMA
JPEG
Use the random play function to play tracks
in a random order.
You can’t use random play with DVD-VR
mode or Video CD playing in PBC mode.
Press the RANDOM button during playback
to select a RANDOM (SHUFFLE) mode.
•
•
•
SHUFFLE
SHUFFLE REPEAT
SHUFFLE OFF
To cancel Random mode, press RANDOM.
Note
•
Any existing Repeat or Repeat A-B modes will be
cancelled and RANDOM mode will be activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
5
Playing Discs
Switching Camera Angles
DVD-Video
Some DVD-Video discs feature scenes shot
from two or more angles. Check the disc box
for details: it should be marked with a
icon if it contains camera-angle scenes.
•
To switch the camera angle, press ANGLE.
Note
•
Depending on the disc, this feature may not work.
Switching the Subtitle Language
DVD-Video
DivX
Many DVD-Video discs or DivX discs have
subtitles in one or more languages. The
disc box will usually tell you which subtitle
languages are available. You can switch the
subtitle language at anytime during playback.
•
•
To display/switch the subtitle language,
press SUBTITLE repeatedly.
The current subtitle language is shown on-screen.
To set subtitle preferences, see page 44.
Note
•
•
In some cases, a subtitle can not be turned off even
if you select “OFF”.
Some discs allow you to change subtitles only via
the disc menu. In that case, press the MENU button
and change the settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Playing Discs
5
Switching the Audio Language
DVD-Video
When playing a DVD-Video disc recorded
with dialog in two or more languages, you
can switch the audio language at anytime
during playback.
•
•
To display/switch the audio language, press
AUDIO repeatedly.
The current audio language is shown on-screen.
To set audio language preferences, see page
44.
Note
•
Depending on the disc, there are cases in which the
audio language cannot be switched during play. In
this case, make changes using the DVD menu.
It may take a few seconds till a selected Audio
•Switching the Audio channel
Language is audible.
Depending on the disc, this feature may not
work.
Video-CD
On Video CDs you can switch between
stereo, just the left channel, just the right
channel or Mixed Mono.
•
To switch the audio channel, press AUDIO
repeatedly.
The current playback channel(s) are indicated on-
screen.
Using the Zoom Function
DVD-Video Video-CD
JPEG
1
During play or pause mode, press the
ZOOM button on the remote control to
zoom in x2, x3, x4, x1/2, x1/3, x1/4,
Normal in order for DVD-Video or VCD and
100%, 125%, 150%, 200%, Normal in
order for JPEG.
5 ∞ 2 3
2
Use the cursor buttons ( / /
/
) to
select the part of the screen you want to
zoom in on.
Note
•
•
•
Zoom play cannot be used on some discs.
Zoom will not operate properly for some scenes.
Zooming may cause image deterioration or shaking.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
5
Playing Discs
5 ∞
2
Use the
/
keys to select one of the
following options and press ENTER.
This option is only available during playback mode.
•
•
TRACK/TITLE/CHAPTER DIGEST – View six
different TRACK/TITLE/CHAPTER on one screen
each time. This allows you to have a quick glance at
all the TRACK/TITLE/CHAPTER on the disc.
DISC INTERVAL – View the whole disc in six
thumbnail pictures. It divides a disc into six
portions at regular intervals and displays them on
one screen.
•
•
TRACK INTERVAL – View the content of a single
track in six thumbnail pictures. It divides a single
track into six portions at regular intervals and
displays them on one screen.
TITLE INTERVAL/CHAPTER INTERVAL – View
the content of a single TITLE/single CHAPTER. It
divides a single TITLE/single CHAPTER into interval
blocks of 10 minutes and displays them on one
screen.
2 3 5 ∞
• Use (
/
/
/ ) to select a track or use
the numeric buttons to enter the selected
track number.
• To go to the previous or next page, press
4 ¢
/
.
• Press ENTER on the selected thumbnail
picture to start playback from there.
• To return to the main menu, select MENU
Preview function
on the screen and press ENTER.
Video-CD
SVCD
DVD-Video
3
To exit the preview menu, select EXIT on
1
Press SCAN.
the screen and press ENTER.
SVCD
VCD
SELECT DIGEST TYPE
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
For CD
• At stop mode, press SCAN on the remote
control. Each track will be played for a few
seconds.
DVD
Note
”
•
•
You can select “Track Interval only during playback
SELECT DIGEST TYPE
TITLE DIGEST
with PBC off.
TITLE INTERVAL
Some discs don’t allow the Scan mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Playing Discs
5
Play back Information
This DVD system can display the disc
playback information (for example, title
or chapter number, elapsed playing time,
audio/subtitle language) and a number of
operations can be done without interrupting
disc playback.
DVD-Video Video-CD
1
During playback, press DISP.
•
A list of available disc information appears
on the TV.
DVD
MENU
TITLE
01/07
01/30
2CH
CHAPTER
AUDIO
ENG
SUBTITLE
BITRATE 00
OFF
TITLE ELAPSED 0:00:23
Video-CD
SVCD
MENU
TRACK
DISC TIME
01/01
1:01:14
TRACK TIME 1:01:14
REPEAT
OFF
BITRATE 75
TOTAL ELAPSED 0:00:20
Title/Chapter/Track selection
DVD
Video-CD
5 ∞
1
2
Press
/
to highlight “Title” / “Chapter”
or “Track”, then press ENTER to access.
Use the numeric keypad (0-9) to enter a
valid number (e.g. 04/05).
Audio/Subtitle
DVD
5 ∞
1
2
Press
Press
/
to highlight “Audio” or
to select one language, then
“Subtitle”, then press ENTER to access.
The Audio or Subtitle menu appears on the TV.
5 ∞
/
press ENTER to confirm.
The current audio or subtitle language will be changed
to the selected language.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
5
Playing Discs
Angle
Repeat
DVD
DVD
Video-CD
5 ∞
5 ∞
1
2
3
Press
/
to highlight “Angle”, then press
1
2
Press
/
to highlight “REPEAT”, then
ENTER to access.
press ENTER to access.
5 ∞
Use the numeric keypad (0-9) to enter in a
valid number.
Press
/
to select the desired repeat
mode, then, press ENTER to access.
Press ENTER to confirm.
Time
Playback will go to the selected angle.
CD
Press DISPLAY (DISP.) repeatedly during
playback to change the displayed disc time
information.
Time Display
DVD
Video-CD
5 ∞
1
Press
/
to highlight “Time Disp.”, then
SINGLE ELAPSED
SINGLE REMAIN
press ENTER to access.
The following display types appear on the TV,
depending on the disc in the player.
TOTAL REMAIN
TOTAL ELAPSED
For DVD discs:
Note
TT Elapsed - elapsed playing time of current Title;
TT Remain - remaining playing time of current Title;
CH Elapsed - elapsed playing time of current Chapter;
CH Remain - remaining playing time of current Chapter;
•
The above information is not displayed with a Video
CD playing in PBC mode.
For VCD/SVCD discs:
Total Elapsed - elapsed playing time of current Disc;
Total Remain - remaining playing time of current Disc;
Single Elapsed - elapsed playing time of current Track;
Single Remain - remaining playing time of current Track;
5 ∞
2
Press
/
to select the desired time
display mode, then press ENTER to display
the selected item.
Time Search
DVD
Video-CD
5 ∞
1
2
Press
/
to highlight “TT Time”/“CH
Time”/“Disc Time” or “Track Time”, then
press ENTER to access.
Use the numeric keypad (0-9) to enter a
valid time (e.g. 0:34:27).
The playback skips to the chosen time.
Note
•
Some disc don’t allow the Time Search mode.
•
You can’t use Time Search mode with a Video CD
playing in PBC mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Playing Discs
5
1
Insert a disc.
•
The disc reading time may exceed 30
seconds due to the complexity of the
directory file configuration.
•
The disc menu appears on the TV.
•
Playback will start automatically. If not,
3
press (PLAY).
00:00
00:00
001/014
MP3_files
Previous
MP3_MUSIC_1
MP3_MUSIC_2
MP3_MUSIC_3
2
3
If the disc main menu contains various
5 ∞
folders, use the
/
keys to select a
desired folder and press ENTER to open
the folder.
5 ∞
Use the
/
keys to select a track/file and
press ENTER to start playback.
•
Playback will start from the selected file
and continue through to the end of the
folder.
During playback, you can;
•
4 ¢
Press
/
to playback another
track/file in the current folder.
•
•
To select another folder from the current
5
disc, press to return to the root menu.
5 ∞
Use the
/
keys to make your selection
and press ENTER to confirm.
Press REPEAT repeatedly to access
various play modes.
•
•
•
OFF
REPEAT ONE: One file will be played repeatedly.
REPEAT FOLDER: All files in one folder will be
played repeatedly.
Tip
•
•
To skip the folders menu when you load a MP3/
JPEG disc, set the MP3/JPEG NAV setting in the
Preference Setup Page to WITHOUT MENU.
Playing a MP3/DivX/JPEG/
™
Windows Media Audio disc
Note
This DVD system can playback most of the
Some discs cannot be played on this player due to
the configuration and characteristics of the disc,
or due to the condition of recording and authoring
software that was used.
™
MP3, JPEG and Windows Media Audio files
recorded on a CD-R/RW disc or commercial
CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
5
Playing Discs
• 12 thumbnail pictures will be displayed on
the TV.
4 ¢
2
3
Press
/
to display the other pictures
on the previous/next page.
2 3 5 ∞
Use the
/
/
/
keys to highlight one
of the pictures and press ENTER to start
playback.
4
Press the MENU to return to Picture CD
menu.
Zoom picture
1
2
During playback, press ZOOM repeatedly
to select a different zoom factor.
2 3 5 ∞
Use the
/
/
/
keys to pan through the
zoomed image.
Tip
•RoTtahitsifneagt/uflreiipspnoint agppthliceabpleicfotruDrievX discs.
•
Zoom play cannot be used on some discs.
•
2 3 5 ∞
During playback, use the
/
/
/
keys
to rotate/flip the picture on the TV.
5
∞
: Flip the picture vertically
: Flip the picture horizontally
2
3
: Rotate the picture counter-clockwise
Playing a JPEG image file (slide show)
: Rotate the picture clockwise
•
Insert a Picture disc (Kodak Picture CD,
JPEG).
Note
For a Kodak disc, the slide show will begin
automatically.
Supported file format:
For a JPEG disc, the picture menu will appear on the
•
•
The file extension has to be “*.JPG” and not “*.JPEG”.
3
TV. Press PLAY to start the slide-show playback.
It can only display DCF-standard still pictures
or JPEG pictures e.g. TIFF. It cannot play back
Note
moving pictures, Motion JPEG and other formats,
or pictures in formats other than JPEG, or pictures
associated with sound.
Some discs don't allow the Picture menu.
•
•
It may require longer time for the DVD system to
display the disc content on the TV due to the large
number of songs/pictures compiled into one disc.
Preview function
7
1
During playback, press
.
Progressive JPEG files will take a longer time to
display compared to baseline JPEGs.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Playing Discs
5
Playing MP3/WMA music and JPEG
pictures simultaneously
You can create a musical slide show if the
disc contains both the MP3/WMA music and
JPEG picture files.
1
2
3
Insert an MP3/WMA disc that contains
music and pictures.
Select an MP3/WMA track in the menu and
3
press PLAY to start playback.
During MP3/WMA music playback, use the
2 3 5 ∞
/
/
/
keys to select a picture folder
3
from the disc menu and press PLAY
.
• The picture files will be played back
through to the end of the folder.
4
To stop simultaneous playback, press
7
STOP
.
Tip
•
It is normal to experience an occasional “skip” while
listening to your MP3 disc.
•
It is normal to experience an occasional pixelation
during MP3/DivX playback due to poor clarity of
digital contents during internet downloading.
•
Only the first session of a multi-session CD will be
played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
5
Playing Discs
Playing a DivX disc
This DVD system supports the playback of
DivX movies which you can copy from your
computer onto a CD-R/RW, DVD R/ RW
disc (see page 9 for more information).
1
2
Insert a DivX disc.
3
Press PLAY to start playback.
During playback, you can;
• If multilingual subtitles are embedded on
the DivX disc, you can press SUBTITLE
to change the subtitle language while
playing.
Tip
•
Subtitle files with the following file name extensions
(.srt, .smi, .sub, .ssa, .ass) are supported but do not
appear on the file navigation menu.
•
•
•
The subtitle file name has to be the same as the file
name of the movie.
The subtitle can only be displayed up to an average
of 42 characters.
AdTvhaentcimeedsefaerachtuferaetusreoifs ntohteavDailiavbXle UdulrtinrgaDivX
movie playback.
• Intera™ctive video menus offer
• XSUB subtitles let you author movies
with multiple language subtitle sets.
unprecedented convenience and control
so you can quickly navigate between
various scenes or bonus features, and
select from audio track and subtitle
options.
• Alternate audio tracks enable audio
tracks in multiple language versions or
separate audio tracks for specific speaker
configurations.
• Chapter points provide flexibility, allowing
you to jump straight to the scene you
want to watch from anywhere within the
video.
DviX compatibility information
•
•
•
Support for DivX 3.11, 4.x, 5.x, 6.x and Ultra.
Q-pel accurate motion compensation.
Global Motion Compensation (GMC) Playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Playing Discs
5
USB Operation
Note
You can play or view the data files (JPEG,
•
•
The supported file systems are FAT12/16/32.
®
MP3, WMA or DivX ) in the USB flash
PROGRESSIVE SCAN
The set cannot switch to USB mode while loading
disc.
drive. However, editing or copying the data
file is not possible.
•
•
•
•
•
When there is too much data in the USB, a long
time may be needed for reading.
STOP
OPEN/CLOSE
/
DVD PLAYER DV4003
PLAY/PAUSE
/
The set supports USB device with maximum
AUDIO EX
USB
capacity of 80 GB and maximum file size is 4 GB.
The USB jack does not support the connection
of other USB devices except to a USB flash drive.
The unit can only support up to a maximum of
300 folders, 648 files and 8 layers.
When the USB device does not fit into the USB
jack, a USB extension cable (not supplied) is
required.
•
•
Copy-protected files are not playable.
Playback of the files recorded in all USB devices,
and power supply to USB devices, are not
guaranteed. Marantz shall not be held liable in the
case of loss of files in a USB device connected to
this player.
•
•
The USB device in use may not be recognized
correctly.
1
2
3
4
Connect the USB flash drive directly to
the
jack on this unit.
Music files cannot be played back by connecting
this player to a PC with a USB cable.
A message appears on the TV when the
device is detected.
Press DISC SKIP on the remote control to
access the data in the drive.
5∞
Use
keys to select a desired file and
press ENTER to start playback.
•
Fro more playback information, see “Playing a
™
MP3/DivX/JPEG/Windows Media Audio disc
(page 27)”, “Playing a JPEG image file (slide
show) (page 28)’, “Playing MP3/WMA music
and JPEG pictures simultaneously (page 29)” or
“Playing a DivX disc (page 30)” for details.
7
5
6
Press (STOP) to stop playback.
Press DISC SKIP on the remote control
to exit from the menu and switch to disc
mode.
•
You can remove the USB device now.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
5
Playing Discs
Using the Setup Menu
Before using the player, you should specify
the settings to be used in accordance with
the conditions under which the player is to
be used.
Note that once changed, the settings will be
saved and remain the same even after the
power has been turned off until the settings
are changed again.
The Setup menu gives you access to all the
player’s settings. Press SETUP to display/
leave the menu and the cursor and ENTER
buttons on the remote control to navigate
and select options.
Note
•
The language options shown in the on-screen
display illustrations on the following pages may not
correspond to those available in your country or
region.
1
Press the SETUP button on the remote
control. Select a tab using the cursor
2 3
buttons (
/
).
GENERAL SETUP: Setup of the GENERAL options
~
Ÿ
!
AUDIO SETUP: Setup of the audio options
VIDEO SETUP: Setup of the display and HDMI
Video options
PREFERENCE: Setup of the language, parental, and
⁄
several other options.
5 ∞
2
3
Use the cursor buttons ( / ) on the
remote control to access the different
features.
Press the ENTER button as many times as
necessary to select the desired option.
To make the setup screen disappear after
setting up, press the SETUP button again.
Note
•
Depending on the disc, some Setup Menu
selections may not work.
•
Some settings can not be selected during
playback and RESUME mode of DVD-Video.
7
In that case, press the (STOP) button once or
twice to stop playback completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
DVD Setup Menu
6
A black dot ( ) indicates the default setting
z
* It can be set only during STOP.
Page
OSD LANGUAGE
DIVX(R) VOD CODE
MP3 RECORD
DISC LOCK *
DISPLAY DIM
PROGRAM *
ꢀENGLISH ESPANOL FRANCAIS
34
34
35
36
36
36
36
36
36
SETUP
LOCK ꢀUNLOCK
GENERAL
SETUP
ꢀ100% 70% 40%
INPUT MENU
SCREEN SAVER
SLEEP
ꢀON OFF
30 MINS 60 MINS 90 MINS 120 MINS 150 MINS ꢀOFF
AUTO STANDBY
ꢀON OFF
Page
37
AUDIO OUT
ꢀSTEREO LT/RT
DIGITAL AUDIO
DIGITAL OUT
37
OFF ꢀALL PCM
LPCM OUT
AUDIO SETUP
VIDEO SETUP
38
ꢀ48KHZ 96KHZ
ꢀON OFF
HDMI AUDIO OUT
38
38
38
ON ꢀOFF
AUDIO DRC
DELAY TIME (0-200 ms) ꢀ0 ms
LIP SYNC
Page
TV SYSTEM
PAL NTSC MULTI
39
39
40
40
41
41
41
41
default setting USA model: NTSC Europe model: PAL
4:3 PAN SCAN 4:3 LETTER BOX ꢀ16:9 WIDE
ꢀOFF ON
TV ASPECT
PROGRESSIVE
PICTURE SETTING ꢀSTANDARD BRIGHT SOFT
PERSONAL
BRIGHTNESS CONTRAST TIINT COLOR
BLACK LEVEL
7.5 IRE 0 IRE
default setting USA model: 7.5 IRE Europe Model: 0 IRE
ON ꢀOFF
CLOSED CAPTION
(USA model only)
COMPONENT
41
41
42
YCbCr ꢀRGB
(Europe model only)
HDMI SETUP
WIDE SCREEN SUPER WIDE 16:9 SQUEEZE ꢀOFF
FORMAT
HDMI VIDEO 480P/525P 576P/625P 720P 1080i 1080P
42
43
ꢀAUTO
HD JPEG
ꢀON OFF
Page
AUDIO
ꢀENGLISH CHINESE JAPANESE FRENCH etc.
ꢀOFF ENGLISH CHINESE JAPANESE FRENCH etc.
ꢀENGLISH CHINESE JAPANESE FRENCH etc.
1 KID SAFE 2 G 3 PG 4 PG13 5 PGR 6 R 7 NC17
44
44
45
SUBTITLE
DISC MENU
PARENTAL
45
ꢀ8 ADULT
ꢀORIGINAL LIST PLAY LIST
WITH MENU ꢀWITHOUT MENU
ꢀSTANDARD CYRILLIC CENTRAL EUR.
ꢀON OFF
PREFERENCE
VR LIST
45
46
46
46
46
46
MP3/JPEG NAV
DIVX SUBTITLE
PBC
CHANGE
PASSWORD
RESET
DEFAULT
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
6
DVD Setup Menu
GENERAL SETUP PAGE
OSD LANGUAGE
DIVX(R) VOD CODE
MP3 RECORD
DISC LOCK
DISPLAY DIM
PROGRAM
SCREEN SAVER
SLEEP
AUTO STANDBY
Note
2
•
Press to go back to the previous menu item.
Press SETUP to exit the menu.
OSD LANGUAGE
The language options are different
depending on your country or region, and
may not match the illustrations shown in the
user manual.
• Default setting: ENGLISH
The OSD (On-Screen Display) language for
this DVD system will remain as you have set
it, regardless of the changes made to the
DVD disc language.
Selects the preferred language for the DVD
system on-screen display menu.
DivX(R) VOD CODE
®
MARANTZ provides you with the DivX VOD
(Video On Demand) registration code that
allows you to rent and purchase videos using
®
3
the DivX VOD service. Press to see the
registration code and press ENTER to exit.
Use the registration code to purchase or
and copy the video from your®computer onto
rent the videos from the DivX VOD service
a CD-R/RW disc for playback on this DVD
system.
Note
•
•
Any video the downloaded from DivX VOD can
only be played back on this DVD system. For more
Setting up the GENERAL SETUP page
Press the SETUP button.
1
2
The time search function is not available during
DivX movie playback.
Select GENERAL SETUP PAGE using the
2 3
cursor buttons (
/
), then press the
ENTER button.
5 ∞
3
Use the cursor buttons ( / ) to select the
3
desired item, then press the cursor ( ) or
ENTER button.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
DVD Setup Menu
6
MP3 RECORD
Bitrate
This feature allows you to convert audio
Select a creating bitrate. Default setting is
128 kbps.
tracks from an audio CD into MP3 format.
The created MP3 files are saved in your
USB device.
5∞
6
7
Move to the TRACK menu and use
keys to select the track that you want to
1
Connect the USB flash drive directly to
create, then press ENTER.
the
jack on this unit.
• To select all tracks, move to Select all in
the menu and press ENTER.
2
3
Load an audio CD.
• To deselect all tracks, move to Deselect
Press SETUP on the remote control.
all in the menu and press ENTER.
Note
To start creating the tracks, move to Start
•
You can also select the MP3 RECORD menu with
pressing and holding the AUDIO button on the
remote control.
in the menu and press ENTER.
• The creating process menu appears.
• A new folder is created automatically in
5 ∞
4
5
Use the cursor buttons ( / ) to select
the MP3 RECORD, then press ENTER.
• The MP3 RECORD menu appears.
the USB device to store all the new MP3
files.
Note
• If the USB device is full, a warning
message will be displayed.
•
If you press one of the buttons on the front
7
panel or remote control (POWER, (STOP),
0
(OPEN/CLOSE) or AUDIO) during creating
MP3 RECORD
process, a message “Do you want to stop
Creating MP3 now?” appears on the TV screen.
Select Cancel to continue creating process.
OPTION
TRACK
Speed
Normal
Track01
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Bitrate
128kbps
Track02
Track03
Track04
Track05
Track06
Track07
8
To exit the menu, move to Exit in the
menu and press ENTER.
SUMMARY
SELECTED
0
Note
TOTAL Time 00:00
•
•
•
•
•
DTS CD and copy-protected CD cannot be
created to MP3 format.
Start
Exit
Select all Deselect all
CD Ripping is supported only with CD Audio
title.
Define your requirements for creating
MP3 files in the OPTIONS menu, then
press ENTER.
Write protected or password protected USB
device cannot be used to store the MP3 files.
ID3 tag will be automatically inserted to the file
created if the CDDA supports CD-TEXT.
Speed
Analog and Digital Audio are muted during CD-
Ripping on Fast speed mode.
Select the creating speed.
Normal
Fast
Normal speed.
Note: You are able to hear the
playback while creating the audio
tracks.
Fast speed.
Note: Analog and Digital are muted.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
6
DVD Setup Menu
4
5
Once complete, select START on the screen
and press ENTER to start playback.
DISC LOCK
• Default setting: UNLOCK
Not all discs are rated or coded by the disc
maker. You can prevent a specific disc from
playing by locking the disc. Up to 40 discs
can be locked.
• Playback will start from the selected track
under the programmed sequence.
To exit the programme menu, select EXIT in
the menu and press ENTER.
• LOCK – Selects this to block the playback
of the current disc. Subsequent access to
a locked disc requires a six-digit password.
The default password is “111111 ”.
Note
•
•
On Super Audio CD discs, you can program tracks
on the CD player.
• UNLOCK – All discs can be played.
When playing back to program, previous RANDOM
and repeat modes are all cancelled.
DISPLAY DIM
•SCWRhEeEnNin VSCADV2E.R0 mode (PBC ON mode), this
• Default setting: 100%
function does not work.
Selects the brightness of the DVD system
display panel.
• Default setting: ON
• 100% – Full brightness.
• 70% – Medium brightness.
• 40% – Dimmest display.
The screen saver prevents damage to the TV
screen by avoiding exposure to a static image
for too long.
• ON – Switches to TV screen saver mode
when playback has been stopped or
paused for more than 15 minutes.
PROGRAM
®
Not for Picture CD/MP3/WMA/DivX /DVD-VR
You can play the contents of the disc in the
• OFF – Turns off the screen saver function.
order you want by programming the playing
order of the tracks. You can store up to 20
tracks.
SLEEP
• Default setting: OFF
PROGRAM TT(07)/CH(- -)
This feature automatically sets the DVD
player in standby mode after the period you
set has elapsed.
1
2
3
4
5
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
6
7
8
9
TT: CH:
TT: CH:
TT: CH:
TT: CH:
10 TT: CH:
NEXT
You can select from 30, 60, 90, 120 and 150
EXIT
minutes. Select OFF to cancel the sleep timer
function.
1
2
Use the numeric keypad (0-9) to enter a
valid track/chapter number.
Press ENTER to confirm your selection.
2 3 5 ∞
Use the
/
/
/
keys to move the cursor
AUTO STANDBY
to the next position.
•
Default setting: ON
• If there are more than ten total
If ON is selected, the standby mode is
automatically selected to save power if the
player is left in the Stop mode for about 30
minutes.
programme tracks, select NEXT on the
¢
screen and press ENTER (or press
on the remote control) to access the next
programming page.
3
To remove the track/chapter from the
programming menu, select the track/
chapter and press ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
DVD Setup Menu
6
5 ∞
3
Use the cursor buttons ( / ) to select the
3
desired item, then press the cursor ( ) or
ENTER button.
AUDIO SETUP PAGE
AUDIO OUT
DIGITAL AUDIO
HDMI AUDIO OUT
AUDIO DRC
LIP SYNC
Note
2
Press to go back to the previous menu item.
•AUDIO OUT
Press SETUP to exit the menu.
• Default setting: STEREO
• STEREO – This option will downmix Dolby
Digital signals directly into analogue
stereo from L/R jacks.
• LT/RT – This option should be used only
if your DVD player is connected to a
Dolby Pro Logic decoder.
Note
•
DTS is not supported.
DIGITAL OUT
• Default setting: ALL
Set the Digital output according to your
optional audio equipment connection.
• OFF – Turn off the digital output.
• ALL – If you have connected your DIGITAL
AUDIO OUT to a multi-channel decoder/
receiver.
• PCM – Only if your receiver is not capable
of decoding multi-channel audio.
Note
•
If HDMI is activated, DIGITAL OUT is muted. HDMI
audio out is related to the “DIGITAL OUT” setting.
If set the “ALL” is set, HDMI Audio out is follows the
EDID. If set the “PCM” is set, HDMI Audio out is
always PCM.
Setting up the AUDIO SETUP page
Press the SETUP button.
•
•
If set the “PCM” is set, DTS is muted.
If you set to “ALL” with a non-DTS compatible
1
2
amplifier, noise will be output when you play a DTS
disc.
Select AUDIO SETUP PAGE using the cursor
2 3
buttons (
button.
/
), then press the ENTER
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
6
DVD Setup Menu
LPCM OUT
AUDIO DRC
• Default setting: 48kHz
• Default setting: OFF
If you connect the DVD Player to a PCM
This mode optimizes playback of sound at
compatible receiver via the digital terminals,
low volume. High volume outputs will be
such as coaxial, you may need to adjust
softened and low volume outputs will be
“LPCM Output”. Discs are recorded at
enhanced to an audible level. This feature
a certain sampling rate. The higher the
is only applicable for DVD video discs with
sampling rate, the better the sound quality.
Dolby Digital mode.
• 48kHz – Playback a disc recorded at the
sampling rate of 48 kHz. A 96 kHz (if
available on disc) PCM data stream will be
converted to 48 kHz.
• ON – Turns on AUDIO DRC mode.
• OFF – Turns off AUDIO DRC mode.
Select this to enjoy the sound with its full
dynamic range.
• 96kHz – Playback a disc recorded at the
Note
sampling rate of 96 kHz. If the 96 kHz
disc is copy-protected, the digital output
will automatically be converted to a
sampling rate of 48 kHz.
Audio DRC is only effective with Dolby Digital
•LIP SYNC
Audio sources.
HDMI AUDIO OUT
• Default setting: 0 ms
• Default setting: ON
This feature allows you to adjust the audio
delay times if the video playback is slower
than the audio output streams, hence
resulting in lip-sync.
If you are not using the HDMI audio output,
you should set this to OFF. If the monitor/
receiver connected to this player using HDMI
does not support HDMI audio signal input,
set this to OFF.
2 3
Access the lip sync setup menu. Use
keys to set the delay times (0 - 200 ms) for
• ON – Select this to turn on the HDMI
the audio output.
audio output.
• OFF – Select this to turn off the HDMI
audio output.
Note
•
This player can output the following audio signals
using HDMI: 32/44.1/48 kHz, 2ch linear PCM
signals and bitstream signals (Dolby Digital, DTS
and MPEG).
•
When audio signals are being output by HDMI-
compatible components, digital output signals are
muted.
•
If HDMI is activated, DIGITAL OUT is muted. HDMI
audio out is related to the “DIGITAL OUT” setting.
If set to “ALL”, HDMI Audio out is follows the EDID.
If set to “PCM”, HDMI Audio out is always PCM.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
DVD Setup Menu
6
Setting up the VIDEO SETUP page
1
2
Press the SETUP button.
Select VIDEO SETUP PAGE using the cursor
2 3
buttons (
/
), then press the ENTER
button.
5 ∞
3
Use the cursor buttons ( / ) to select the
3
desired item, then press the cursor ( ) or
ENTER button.
VIDEO SETUP PAGE
TV SYSTEM
TV ASPECT
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
COMPONENT
HDMI SETUP
Note
2
to go back to the previous menu item.
•TVPSreYssSTEM
Press SETUP to exit the menu.
• Default setting: NTSC (USA model)
PAL (Europe model)
The colour system of the DVD system,
DVD and TV should match: only then will it
be possible to play a DVD on this system.
Before changing the TV system, determine
the colour system of your TV.
• PAL – Select this if the connected TV has
the PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
• NTSC – Select this if the connected
TV has the NTSC colour system. It will
change the video signal of a PAL disc and
output it to NTSC format.
• MULTI – Select this if the connected TV
is compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
Select one of the options and press ENTER
to confirm.
• Follow the instructions shown on the TV
to confirm the selection (if any).
• If a blank/distorted TV screen appears,
wait for 15 seconds for the auto recovery.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
6
DVD Setup Menu
• 16:9 WIDE – Select this if you have a
CHANGING PAL TO NTSC
1.ENSURE THAT YOUR TV SYSTEM SUPPORTS
wide-screen TV.
NTSC STANDARD.
2.IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV.WAIT IS SECONDS
FOR AUTO RECOVER
OK
CANCEL
Select one of the options and press ENTER
to confirm.
Video output format
Note
Disc
TV
Output Format
•PRSOomGeRdEisScsSwIVillEnot allow you to change the aspect
Format
system
YCbCr
Video/S-Video
PAL
ratio.
NTSC
PAL
PAL
PAL Progressive
NTSC NTSC Progressive
NTSC
NTSC
PAL
MULTI NTSC Progressive
• Default setting: OFF
PAL
PAL Progressive
NTSC NTSC Progressive
NTSC
Progressive scanning displays twice the
MULTI PAL Progressive
PAL
number of frames per second as interlaced
scanning (ordinary normal TV system).
With nearly double the number of lines,
progressive scanning offers higher picture
resolution and quality.
To change the TV system manually:
0
1) Press OPEN CLOSE to open the disc tray.
3
2) Press (RIGHT) on the remote control.
3) Press AUDIO on the remote control to change
the TV system setting.
Before you start...
PAL NTSC
Æ
Ensure that you have connected this DVD
NTSC PAL
Æ
system to a progressive scan TV using the
YCbCr connection (see page 11 “Home
theater video connections”).
TV ASPECT
• Default setting: 16:9 WIDE
• ON – Turns on progressive scan mode.
Set the aspect ratio of the DVD system
The instruction menu appears on the TV.
according to the TV type you have
connected. The format you select must be
available on the disc. If it is not, the setting
for TV display will not affect the picture
during playback.
ACTIVATING PROGRESSIVE SCAN:
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS A DISTORTED PICTURE, WAIT
15 SECONDS FOR AUTO RECOVERY.
• 4:3 PAN SCAN – Select this if you have
OK
CANCEL
a conventional
TV and want both
sides of the picture
to be trimmed or
formatted to fit your
TV.
2
1) Press to highlight “OK” in the menu and press
ENTER to confirm.
The picture on your TV will remain distorted in
this state until you turn on the progressive scan
mode on your TV.
2) Turn on your TV's progressive scan mode
(refer to the user manual for your TV.)
The following menu appears on the TV.
• 4:3 LETTER BOX – Select this if you have
a conventional TV. In this
case, a wide picture with
black bands on the upper
and lower portions of
the TV will be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
DVD Setup Menu
6
BLACK LEVEL
• Default setting: 7.5 IRE (USA model)
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
0 IRE (European model)
If you set the TV type to NTSC, set the Black
level shift to 7.5 IRE. This will improve the
OK
CANCEL
color contrast during playback. The black
level setting has no effect if the TV type is
set to PAL.
2
3) Press to highlight OK in the menu and press
ENTER to confirm.
The set-up is complete now and you can start to
• 7. 5 IRE – Select this to enhance the black
enjoy the high quality picture.
level.
• OFF – Disables the progressive scan
• 0 IRE – Select this for the standard black
mode.
level setting.
To deactivate Progressive manually:
CLOSED CAPTION (USA Model only)
0
1) Press OPEN CLOSE to open the disc tray.
2
2) Press (LEFT) on the remote control. Press
• Default setting: OFF
AUDIO on the remote control.
Closed captions are data hidden in the video
The DVD background screen appears on the TV.
signals of specific discs, and are invisible
without the use of a special decoder. The
difference between subtitles and captions
is that subtitles are intended for hearing
persons and captions are for the hearing
impaired. Subtitles rarely show all of
the audio. For example, captions show
Tip
•
There are some progressive scan TVs and high-
definition TVs that are not fully compatible with
this unit, resulting in an unnatural picture when
playing back a DVD Video disc in the progressive
scan mode. In this case, turn off the progressive
scan feature on both the DVD system and your TV.
sound effects (e.g., “phone ringing” and
“footsteps”), while subtitles do not. Before
you select this function, please ensure that
the disc contains closed caption information
and your TV set also supports this function.
PICTURE SETTING
• Default setting: STANDARD
This DVD system provides three predefined
sets of picture colour settings and one
• ON – Select this to enable the closed
caption function.
personal setting which you can define
yourself.
• OFF – Select this to disable the closed
caption function.
• STANDARD – Original colour setting.
• BRIGHT – Vibrant colour setting.
• SOFT – Warm colour setting.
COMPONENT
(Euro model only)
• PERSONAL – Selects this to personalise
• Default setting: RGB
2 3
the picture colour setting. Use the
/
This setting allows you to toggle the output
of the video signal between RGB (on the A/V
EURO CONNECTOR) and YCbCr (on the
component).
keys to select to the setting that best
suits your personal preference and press
ENTER to confirm. For an average setting,
select 0.
• BRIGHTNESS – Increase the value to
• YCbCr – Select this for YCbCr Pr
brighten the picture or vice versa.
connection on component Video out.
• CONTRAST – Increase the value to
• RGB – Select this for the A/V EURO
sharpen the picture or vice versa.
CONNECTOR.
• TINT – Increase the value to darken
To change the COMPONENT out manually:
the picture or vice versa.
0
1) Press OPEN CLOSE to open the disc tray.
• COLOR – Increase the value to
enhance the color in your picture or
vice versa.
3
2) Press (RIGHT) on the remote control.
3) Press ANGLE on the remote control to change
the COMPONENT out.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
6
DVD Setup Menu
HDMI VIDEO
Note
• Default setting: AUTO
•
When the player is set to YCbCr, some TV may not
properly synchronise with the player on the A/V
Selects a suitable video resolution depending
EURO connector.
on the capability of the connected TV/device
to enhance the HDMI video output.
• 480P/525P – Progressive output in 480
HDMI SETUP
lines for NTSC TV
This feature is only applicable if you have
connected this DVD system to a HDMI-
compatible TV/device.
• 576P/625P – Progressive output in 576
lines for PAL TV
This setting can be toggled on and off by
pressing the HDMI button for three seconds
or more. HDMI is on when the unit is shipped
from the factory.
• 720P – (if a HDMI TV is connected)
Progressive output upscaled to 720 lines
• 1080i – (if a HDMI TV is connected)
Interlaced output upscaled to 1080 lines
• 1080P – (if a HDMI TV is connected)
Note
Progressive output upscaled to 1080 line
•
This unit supports HDMI Ver. 1.0.
• AUTO – The video output will
automatically follow the display’s
supported resolution
•
This unit does not support HDMI control functions
(CEC).
WIDE SCREEN FORMAT
Note
• Default setting: OFF
•
If no display appears on the TV due to an
Selects a suitable screen display. This feature
is only available if you have selected TV
ASPECT – 16:9 WIDE.
unsupported resolution, use the composite video
cable to connect the DVD system and your TV. Turn
on your TV to the correct input channel for the
composite video and adjust the resolution setting
to 480P/576P.
• SUPER WIDE – Selects this to display a
4:3 picture disc on a wide-screen TV with
non-linear stretching (the centre position
of the screen is stretched less than the
side).
•
•
•
The resolution can also be set with the HDMI
button on the remote control.
In general, the larger the number, the higher the
resolution.
• 16:9 SQUEEZE – Selects this to display
a 4:3 picture disc on a widescreen TV
without stretching. Black bars will be
shown on the both sides of the TV screen.
When the resolution is changed, the image may
be corrupted or the output may take longer than
normal.
•
Pressing the HDMI button for three seconds or
more toggle the HDMI on/off state.
• OFF – No aspect ratio adjustment is
made when this option is selected.
Note
•
The WIDE SCREEN FORMAT feature will be
disabled if your HDMI TV has been preset to the
480P or 576P settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
DVD Setup Menu
6
Setup Examples
Video
HDMI output
Sink EDID
Disc
S-Video
YCbCr
YCbCr
TV Aspect
16 : 9 Wide
PSCAN FORMAT
Dont' care
Dont' care
Dont' care
OFF
(Progressive:ON)
Format
4:3
16:9
(Progressive:OFF)
4:3 LB1
4:3 PS*
16:9
2
4:3 PS*
16 : 9 Wide
16 :9 SQUEEZE
SUPERWIDE
Dont' care
4:3
4:3 LB
4:3 PS
1
* : When actual video output is Letterbox. ("TV Aspect" is 4:3panscan but disc does NOT permit Pan-scan.)
2
* : When actual video output is Pan-scan. ("TV Aspect" is 4:3panscan and disc permits Pan-scan.)
Video Out format when HDMI is activated
YCbCr Output
HDMI Video
Video/S-Video output
Output
Progressive ON
Progressive OFF
480P
576P
480P (NTSC progressive)
576P (PAL progressive)
480P or 576P
480i
576i
480i or 576i
720P
1080i
1080P
Follow the Disc Source with
Follow the Disc Source with Interlace output.
Progressive output. (ex: NTSC
disc is played: NTSC Progressive
out.)
(ex: NTSC disc play: NTSC interlace)
HD JPEG
Note
• Default setting: ON
•
•
•
When playback MP3, selecting HD JPEG file will
stop the playback of MP3. The set will display the
HD JPEG file selected.
This feature allows you to view JPEG in
High Definition Mode if the display device
supports resolutions higher than or equal to
720P.
There might be a blank screen displayed for a few
seconds during slideshow when the JPEG is getting
loaded.
• ON – Turns on HD JPEG mode when the
During HD JPEG slideshow, user cannot change
HDMI resolution.
HDMI video output is 720P, 1080i or
1080P.
• OFF – Turns off HD JPEG mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
6
DVD Setup Menu
Setting up the PREFERENCE page
7
1
2
Press (STOP) twice to stop playback (if
any), then press SETUP.
Select PREFERENCE PAGE using the cursor
2 3
buttons (
/
), then press the ENTER
button.
5 ∞
3
Use the cursor buttons ( / ) to select the
3
desired item, then press the cursor ( ) or
ENTER button.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
VR LIST
MP3/JPEG NAV
DIVX SUBTITLE
PBC
PASSWORD
DEFAULT
Note
2
•
to go back to the previous menu item.
UsPinregssthe AUDIO, SUBTITLE and DISC
Press SETUP to exit the menu.
MENU language
You can select your preferred language
settings for DVD playback. If the selected
language is recorded on the DVD disc, the
DVD system will automatically play the
disc in that language. Otherwise, the disc’s
default language will be used instead.
AUDIO
Selects the preferred audio language for
DVD playback.
• Default setting: ENGLISH
If the language you want is not in the list,
select OTHERS, then use the numeric
keypad (0-9) on the remote to enter the
4-digit language code “XXXX” (see page 47
“Language Codes”) and press ENTER.
SUBTITLE
Selects the preferred subtitle language for
DVD playback.
• Default setting: OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
DVD Setup Menu
6
DISC MENU
VR LIST
Selects the preferred disc menu language for
DVD playback.
• Default setting: ORIGINAL LIST
There are two ways to play back a disc in VR
• Default setting: ENGLISH
(Video Recording) format: ORIGINAL LIST
and PLAY LIST. This feature is not available
with non-VR format discs.
5 ∞
Use the
•
/
keys to select a language and
press ENTER to confirm.
• ORIGINAL LIST – Select this to play the
Note
originally recorded titles on the disc.
For some discs, selection can be made using the
• PLAY LIST – Select this to play the
PADRVEDNmTeAnuL. In this case, press MENU to display the
edited version of the disc. This feature is
DVD menu screen and then make your selection.
only available when a play list has been
created.
• Default setting: 8 ADULT
Previewing VR format
Some DVDs may have a parental level
1
2
During playback, press SCAN.
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set a
playback limitation level.
5 ∞
Press
/
to highlight either TITLE
DIGEST or TITLE INTERVAL.
The rating levels are from 1 to 8 and are
SELECT DIGEST TYPE
TITLE DIGEST
country dependent. You can prohibit the
TITLE INTERVAL
playing of certain discs that are not suitable
for your children or play certain discs with
alternative scenes for certain discs.
PREFERENCE PAGE
3
Press ENTER to select the function.
AUDIO
1 KID SAFE
2 G
SUBTITLE
DISC MENU
PARENTAL
VR LIST
MP3/JPEG NAV
DIVX SUBTITLE
PBC
• TITLE DIGEST – This function will display
thumbnail pictures of titles on the screen.
Up to six thumbnail pictures per page will
be displayed.
3 PG
4 PG 13
5 PGR
6 R
7 NC 17
8 ADULT
PASSWORD
DEFAULT
• In ORIGINAL LIST mode, the originally
recorded titles on the disc will be
displayed.
5 ∞
1
2
Press
/
to highlight a rating level for the
disc inserted and press ENTER.
• In PLAY LIST mode, every title in the
• To disable parental controls and have all
play list will be displayed.
discs play, select 8 ADULT.
• TITLE INTERVAL – This function will
divide and display the contents of each
title being played back in regular intervals,
making it easy to preview the recording.
Up to six thumbnail pictures per page will
be displayed.
Use the numeric keypad (0-9) to enter the
six-digit password (see page 46).
• DVDs that are rated above the level you
selected will not play unless you enter the
six-digit password.
• If the title being played back is short,
the TITLE DIGEST function will be
performed instead.
Note
•
•
VCD, SVCD, and CD have no level indication, so the
parental control function has no effect with these
types of discs. This also applies to most illegal DVD
discs.
Some DVDs are not encoded with a rating even
though the movie rating may be printed on the disc
cover. The rating level feature does not work for
such discs.
(example for 6 thumbnail pictures display)
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
6
DVD Setup Menu
2 3 5 ∞
4
5
Use
/
/
/
to select a title, or use the
• ON – The index menu (if available) will
appear on the TV when you load a VCD/
SVCD.
numeric buttons to enter the title number
next to SELECT.
• OFF – The VCD/SVCD will skip the index
menu and playback directly from the
beginning.
4 ¢
• Press
/
to access the previous/
next page.
Press ENTER to confirm the selection.
To quit the preview function
PASSWORD
2 3 5 ∞
•
Use
/
/
/
to highlight EXIT and press
The password is used for both Parental
Control and Disc Lock. Enter your six-digit
password to play a locked disc or when
prompted for a password. The default
password is “111111 ”. To change the password:
ENTER to confirm.
To return to the preview menu
2 3 5 ∞
•
Use
/
/
/
to highlight MENU and press
ENTER to confirm.
MP3/JPEG NAV
1
2
Press ENTER to access the change password
menu.
• Default setting: WITHOUT MENU
MP3/JPEG Navigator can only be set if the
disc is recorded with a menu. It allows you
to select different display menus for easy
navigation.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
• WITHOUT MENU – Displays all the files
contained in the MP3/Picture disc.
OK
• WITH MENU – Displays the folder menu
of the MP3/Picture disc.
in the directory.
Use the numeric keypad 0-9 on the remote
control to enter your existing six-digit
password at OLD PASSWORD.
Note
•
This DVD system can only display 650 files/folder
Note
DIVX SUBTITLE
•
When doing this for the first time or if you forget
your existing password, key in “111111 ”.
You can set the font type that supports the
recorded DivX subtitle.
3
4
5
Enter the new six-digit password at NEW
PASSWORD.
• Default setting: STANDARD
STANDARD
Enter the new six-digit password again at
CONFIRM PWD.
Albanian, Danish, Dutch, English, Finnish, French,
Gaelic, German, Italian, Kurdish (Latin), Norwegian,
Portuguese, Spanish and Swedish.
Press ENTER to confirm and exit the menu.
DEFAULT
CYRILLIC
Bulgarian, Belorussian, English, Macedonian, Moldavian,
Russian, Serbian and Ukrainian.
This feature enables you to reset all the
setup menu options and your personal
Note
settings to the factory defaults, except your
password for Parental Control and Disc Lock.
Press ENTER to confirm the default reset.
•PBSCupported subtitle extensions for DivX are “.srt”,
“.smi”, “.sub”, “.ssa”, “.ass”.
• Default setting: ON
The Play Back Control feature is applicable
for VCD/SVCD only. It allows you to play
Video CDs (2.0) interactively, following the
menu on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Additional Information
7
Language Codes
This page is used to select other languages. This does not affect the options in AUDIO, SUBTITLE or
DISC MENU.
Abkhazian
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
Oromo
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Ido
7379
7368
7365
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
7866
7878
7889
7878
7967
6785
6785
6785
7982
Afar
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Indonesian
Afrikaans
Interlingua (International)
Albanian
Interlingue
Amharic
Panjabi
Inuktitut
Arabic
Persian
Inupiaq
Armenian
Assamese
Avestan
Polish
Irish
Portuguese
Provençal; Occitan (post)
Pushto
Italian
Japanese
Aymara
Javanese
Azerbaijani
Bashkir
Quechua
Raeto-Romance
Romanian
Rundi
Kalaallisut
Kannada
Basque
Kashmiri
Belarusian
Kazakh
Bengali
Russian
Khmer
Bihari
Samoan
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Bislma
Sango
Bokmål, Norwegian
Bosnian
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Komi
Breton
Korean
Bulgarian
Kuanyama; Kwanyama
Burmese
Shona
Kurdish
Castilian, Spanish
Sindhi
Kwanyama; Kuanyama
Catalan
Sinhalese
Lao
Chamorro
Chechen
Slovak
Latin
Slovenian
Somali
Latvian
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Letzeburgesch;
Limburgan; Limburger;
Limburger; Kimburgan;
Limburgish; Limburger;
Lingala
Sotho, Southern
South Ndebele
Spanish; Castilian
Sundanese
Swahili
Chuang; Zhuang
Church Slavic; Slavonic;
Church Slavonic; Church
Chuvash
Lithuanian
Swati
Luxembourgish;
Macedonian
Malagasy
Cornish
Swedish
Corsican
Tagalog
Croatian
Tahitian
Malay
Czech
Tajik
Malayalam
Danish
Tamil
Maltese
Dutch
Tatar
Manx
Dzongkha
Telugu
Maori
English
Thai
Marathi
Esperanto
Tibetan
Marshallese
Estonian
Tigrinya
Moldavian
Faroese
Tonga (Tonga Islands)
Mongolian
Fijian
Tsonga
Nauru
Finnish
Tswana
Navaho; Navajo
Navajo; Navaho
Ndebele; North
Ndebele; South
Ndonga
French
Turkish
Frisian
Turkirnen
Twi
Gaelic; Scotish Gaelic
Gallegan
Uighur
Georgian
Ukrainian
Urdu
Nepali
German
Northern Sami
North Ndebele
Norwegian
Gikuyu; kikuyu
Greek,
Uzbek
Vietnamese
Guarani
Volapük
Norwegian Bokmål; Bokmål
Norwegian Nynork
Nyanja; Chichewa; Chewa
Nynorsk; Norwegian;
Occitan (post 1500); Proven
Old Bulgarian; Old Slavonic;
Old Church Slavonic; Old
Old Slavonic; Church
Oriya
Gujarati
Walloon
Hausa
Welsh
Hebrew
Wolof
Herero
Xhosa
Hindi
Yiddish
Hiri Motu
Hungarian
Icelandic
Yoruba
Zhuang; Chuang
Zulu
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
7
Additional Information
Handling discs
Discs to avoid
When holding discs of any type, take care not to leave
Discs spin at high speed inside the player. If you can see
fingerprints, dirt or scratches on the disc surface. Hold
the disc by its edge or by the center hole and edge.
that a disc is cracked, chipped, warped, or otherwise
damaged, don't risk using it in your player. You could
end up damaging the unit.
Damaged or dirty discs can affect playback performance.
Take care also not to scratch the label side of the disc.
Although not as fragile as the recorded side, scratches
can still result in a disc becoming unusable.
This unit is designed for use with conventional,
fully circular discs only. Use of shaped discs is not
recommended for this product.
Should a disc become marked with fingerprints, dust,
etc., clean using a soft, dry cloth, wiping the disc lightly
from the center to the outside edge as shown in the
diagram below.
Cleaning the pickup lens
The DVD player’s lens should not become dirty in normal
use, but if for some reason it should malfunction due to
dust or dirt, consult your nearest MARANTZ-authorized
service center. Although lens cleaners for CD players
Don’t wipe the disc surface
using circular strokes.
Wipe lightly from the
center of the disc using
straight strokes.
aPrreocobmlemmercsiawllyiatvhailcabolen,dweendosanottiorencommend using
them since some may damage the lens.
If necessary, use a cloth moistened in alcohol, or a
commercially available CD/DVD cleaning kit to clean a
disc more thoroughly. Never use benzene, thinner or
other cleaning agents, including products designed for
cleaning vinyl records.
Condensation may form inside the player if it is brought
into a warm room from outside, or if the temperature of
the room rises quickly. Although the condensation won’
t damage the player, it may temporarily impair its per-
formance. For this reason you should leave it to adjust
to the warmer temperature for about an hour before
switching on and using it.
Storing discs
Although CDs and DVD discs are more durable than
vinyl records, you should still take care to handle and
store discs correctly. When you're not using a disc,
return it to its case and store upright. Avoid leaving discs
in excessively cold, humid, or hot environments (including
under direct sunlight).
Don't glue paper or put stickers onto the disc, or use
a pencil, ball-point pen or other sharp-tipped writing
instrument. These could all damage the disc.
For more detailed care information, see the instructions
that come with discs.
Do not load more than one disc into the player.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Additional Information
ing a suitable location for it:
7
Hints on installation
Moving the player
If you need to move the player, first press the POWER
We Dwaont..y.ou to enjoy using this unit for years to come,
so please bear in mind the following points when choos-
ON/STANDBY button on the front panel to put the
player in standby, then unplug the power cord. Never lift
or move the unit during playback: discs rotate at high
speed and may be damaged.
Use in a well-ventilated room.
✓
Place on a solid, flat, level surface, such as a table,
✓
Precautions on using the power cord
shelf or stereo rack.
Handle the power cord by the plug part. Do not pull
out the plug by tugging the cord, and never touch the
power cord when your hands are wet, as this could
cause a short circuit or electric shock. Do not place the
unit, a piece of furniture, or other object on the power
cord or pinch the cord in any other way. Never make a
knot in the cord or tie it with other cords. The power
Don’t...
Use in a place exposed to high temperatures or
✗
humidity, including near radiators and other heat-
generating appliances.
Place on a window sill or other place where the
✗
player will be exposed to direct sunlight.
cords should be routed so that they are not likely to
be stepped on. A damaged power cord can cause a fire
or give you an electric shock. Check the power cord
once in a while. If you find it damaged, ask your nearest
MARANTZ authorized service center or your dealer for
a replacement.
Use in an excessively dusty or damp environment.
✗
Place directly on top of an amplifier, or other
✗
component in your stereo system that becomes
hot during use.
Use near a television or monitor as you may ex-
✗
perience interference, especially if the television
uses an indoor antenna.
Use in a kitchen or other room where the player
may be exposed to smoke or steam.
✗
✗
✗
Use on a thick rug or carpet, or cover with cloth:
this may prevent proper cooling of the unit.
Place on an unstable surface, or one that is not
large enough to support all four of the unit’s feet.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
7
Additional Information
Troubleshooting
Settings are canceled.
Incorrect operation is often mistaken for
trouble or malfunction. If you think that
there is something wrong with this unit,
check the points below. Sometimes the
trouble may lie in another component.
Inspect the other components and
electrical appliances being used. If
the trouble cannot be rectified after
checking the items below, ask your
nearest MARANTZ authorized service
center or your dealer to carry out repair
work.
•
When the power is cut due to a power failure or by
unplugging the power cord, settings will be canceled.
Before unplugging the power cord, press the POWER
button on the remote control and check that the
STANDBY indicator on the front panel is lit.
No picture/No color.
•
•
•
Incorrect video connections.
Check that connections are correct and that plugs are
inserted fully.
TV/monitor or AV amplifier settings are incorrect.
Check the instruction manual of the connected
equipment.
The PROGRESSIVE menu is set to ON but your TV/
monitor is not compatible with progressive scan.
The disc is ejected automatically after loading.
Reconnect the player to your TV using a composite
•
•
•
Dirty or damaged disc.
or S-Video cord and set the TV to the appropriate
input. Now choose the Interlace setting in the
PROGRESSIVE menu, then switch the TV input back
to the component input. (page 40)
See page 48 for disc care information.
Disc not seated properly in the disc guide.
Align the disc properly.
Incompatible region number.
Screen is stretched or aspect does not change.
If the region number on a DVD-Video disc does not
match the number on the player, the disc cannot be
used (page 7).
•
The TV ASPECT setting in the Setup menu is incorrect.
Set the TV ASPECT option to match the TV/monitor
you're using (page 40).
•
Condensation inside the player.
Allow time for condensation to evaporate. Avoid using
the player near an air-conditioning unit.
Picture disturbance during playback or dark.
•
•
This player is compatible with Macro-Vision System copy
guard. Some discs include a copy prevention signal, and
Playback is not possible.
when this type of disc is played back, stripes etc., may
appear on some sections of the picture depending on the
TV. This is not a malfunction.
•
Disc is loaded upside down.
Reload the disc with the label side face-up.
Discs respond differently to particular player functions.
This may result in the screen becoming black for a brief
instant or shaking slightly when the function is executed.
Cannot play DVD-R/RW disc.
•
Only a DVD-R/RW disc that has been finalized only can be
played.
These problems are largely due to differences between
discs and disc content and are not malfunctions of this
player.
DVD-Audio playback stops.
•
When using progressive-scan
•
DVD-Audio disc can not be played.
If your TV is connected using the COMPONENT
VIDEO OUT jacks, set the PROGRESSIVE menu to
OFF (page 40).
mark appears on the screen.
•
The operation is prohibited by the player.
When recorded on a VCR or passed through an AV
selector, there is disturbance in the playback picture.
•
The selected function does not operate for that disc.
Picture playback stops and the operation buttons can
•
Due to the player’s copy protection circuits, connection
not be used.
of this device through a VCR or an AV selector may
prevent recording or cause picture problems. This is not a
malfunction.
7
3
•
•
Press (STOP), then start playback again (PLAY).
Switch to standby once using the front panel POWER
ON/STANDBY and then switch on again using the front
panel POWER ON/STANDBY.
New settings made in the Setup screen menus while a
disc is playing are ineffective.
•
Some settings can be changed while a disc is playing, but
do not take effect until the disc is stopped then restarted.
This is not a malfunction.
Make the same setting when the player is stopped.
7
3
Press (STOP), then restart playback (PLAY).
Note that making settings in the Setup screen menus
RESUME
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Additional Information
7
The remote control doesn't seem to work.
No DTS audio output.
•
•
The remote control is too far from the player, or the angle
with the remote sensor is too wide.
•
•
If this unit is connected to a non-DTS compatible amplifier
or decoder using a digital audio cable, set DIGITAL OUT
to PCM in the Setup menu. If you do not do this, noise
will be output if you try and play a DTS disc.
Use the remote control within its operating range (page
7).
If this unit is connected to a DTS-compatible amplifier or
decoder using a digital audio cable, check the amplifier
settings, and that the cable is properly connected.
The batteries are exhausted.
Put in new batteries (page 7).
Cannot listen to high-sampling rate audio through the
A disc containing the MP3 tracks won’t play.
digital output.
•
If the disc is a recordable CD, make sure that the disc had
•
•
LPCM Out is set to 48 kHz.
been finalized.
Set it to 96 kHz.
Check that the track(s) are in the MPEG1 Audio Layer
As a copy-protection measure, some DVDs do not output
96 kHz audio.
3 format.
In this case, even if 96 kHz is selected, the player
automatically outputs the audio at 48 kHz. This is not
a malfunction.
Some MP3 tracks appear to be missing from a disc.
•
If a track name does not end in “.mp3” or “.MP3”, this
player will not recognize it as an MP3 track.
No audio, or audio is distorted.
•
This player only recognizes about 650 files per folder and
300 folders per disc. If there are more titles than this, you
will not be able to play them.
•
•
•
Some DVD discs do not output digital audio.
Switch your amplifier to the player's analog outputs.
Dirt, dust, etc. on the disc.
•
This player is not compatible with multi-session discs.
If the disc is multi-session, you will only be able to play
tracks recorded onto the first session.
Clean the disc (page 48).
Interconnectors are not fully inserted into the terminals (or
are not connected).
The unit is connected to an HDMI/DVI component but
Check that all interconnectors are firmly inserted.
Dirty or oxidized plugs/terminals.
the HDMI/DVI indicator on the display does not light.
•
•
•
•
•
•
Set the input selector on the connected TV or HDMI/DVI
Clean the plugs/terminals.
component to this unit.
Incorrect audio cable connection.
This unit cannot be connected to TVs or HDMI/DVI
components that do not support HDCP.
Check the audio connections (pages 10 to 12).
Player's output is connected to the amplifier's phono
(turntable) inputs.
Reset this unit and the TV or HDMI/DVI component by
turning them off and on.
Connect to any set of inputs except phono.
•
The disc is paused.
No video appears on the connected HDMI/DVI
3
Press (PLAY) to exit the pause mode.
component.
•
Incorrect amplifier settings.
•
Can the connected TV or HDMI/DVI component use the
Check that the volume is turned up, that the speakers
selected resolution?
are on, the input function set correctly, etc.
Set the HDMI VIDEO under HDMI Setup. (page 42)
The analog audio is OK, but there appears to be no
•
Set the input selector on the connected TV or HDMI/DVI
component to this unit.
digital audio signal.
•
Incorrect AUDIO SETUP menu settings.
•
TVs or HDMI/DVI components that do not support HDCP
Make sure that the DIGITAL OUT setting is set to ALL
cannot output video from this unit.
or PCM (page 37).
Check the amp's instruction manual.
No audio is coming from the connected HDMI
component.
Noticeable difference in DVD and CD volume.
•
•
•
The unit will not output an audio signal if Audio has been
•
DVDs and CDs use different recording methods. This is
not a malfunction.
turned off under HDMI AUDIO OUT Setup. (page 38)
Some HDMI-compatible monitors do not support audio
output.
Cannot output 192 kHz or 176.4 kHz digital audio.
The unit will not output an audio signal if a DVI
The player does not output digital audio at these sampling
component has been connected.
rates.
Cannot output 96 kHz or 88.2 kHz digital audio.
•
•
Check that the LPCM OUT setting is not set to 96 kHz
(page 38).
Some discs are digital copy-protected and do not output
high sampling rate digital audio.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
7
Additional Information
Frequently Asked Questions (USB)
Unable to play DivX movies.
•
Check that the DivX files are encoded with “Home
Theater's mode with DivX” certified encoder.
Why does it take so long to display the contents on my
USB device?
•
•
This could be due to the large numbers of files (>500
files/folders) or size of the files (>1MB).
No sound during DivX movies playback.
•
The audio codes may not be supported by the DVD player.
There could be other no-supported files in the device that
the system is trying to read/display.
A DivX movie does not repeat.
•
Check that file size of the movies does not exceed the file
size of the CD disc during burning.
What if no-supported devices (e.g. USB mouse,
keyboards) are plugged into the unit?
•
The device may cause the unit to be unstable. Remove the
no-supported device and unplug the power cord. Wait for
Certain DivX files do not play or are skipped.
•
•
Check that the DivX movie download is a complete file.
a few minutes before reconnecting the power cord and
power on the unit again.
Make sure the file name extension is correct. You can
check this using a computer with CD-ROM.
What happens when I plug in a USB HDD?
•
The unit is designed to playback DVD, VCD, SVCD, CD
audio, MP3, WMA and DivX discs only. Other digital audio
formats such as liquid audio, RM (RealMedia), WMA or
no-audio files like “.doc”, “.txt”, “.pdf”, are not supported.
•
HDD is not supported as the large storage capacity makes
navigation very difficult. Transfer the music files (mp3) and
photos (jpg) into a USB flash drive.
•
Try to play the problem DivX files on a computer. If they
do not work, the source file appears to be corrupted.
Why does the unit fail to detect my USB portable
music player?
•
Try to download the file again from a different source, or if
you have created the file yourself, save it with the correct
settings.
•
The portable music player may require propriety software
that is bundled with the unit in order to access the
contents (e.g. playlist.) The unit can only support mass
storage class device, but not Media Transfer Protocol
(MTP) class.
The contents of the USB flash drive cannot be read.
•
The USB flash drive format is not compatible with the
system.
What types of file does the unit support?
•
Drive is formatted with a different file system which is not
•
We support only FAT16 and FAT32, not NTFS.
supported by this unit (e.g., NTFS).
Why does the file name appear to be different from
what was displayed on my computer (e.g. from “Good
Bye .jpg” to “Good_B-l.jpg”)?
Slow operation of the USB flash drive.
•
Large file size or high memory USB flash drive takes longer
time to read and display on the TV.
•
•
The length of the file name is restricted by the file system
of the device (FAT16), which only supports eight (8)
characters.
The computer may be able to display the full file name as
the operating system can convert the file system.
Is simultaneous USB and Disc playback possible?
•
This is not possible due to memory limitation, In addition,
a different user interface will be needed in order to
function and in order to be simple enough to use.
Why can’t I rotate the pictures in my device?
•
In order to rotate the pictures in the USB device, the
picture must contain EXIF information, stored by most
digital cameras. This EXIF information may have been
removed when you edit or copy the picture from other
devices using editing programs.
Why can’t the unit play some of my music files, photos
or movies?
•
The music files may not be playable because of different
formats and encoding bit-rates. Similarly, the photos may
be of low resolution or too high resolution for the unit to
support.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ENGLISH
Additional Information
7
21-pin connector assignment
(Europe model only)
Specifications
AV connector output ........................ 21-pin connector
This connector provides the video and audio signals
for connection to a compatible color TV or monitor.
General
System
DVD-Video, DVD R/RW, Video CD, CD, MP3 files,
JPEG files, DviX, WMA and USB
Power requirements (U.S.A.).................... 120 V, 60Hz
20 18 16 14 12 10 8 6 4 2
Power requirements (Europe)..................230 V, 50Hz
Power consumption..................................................16 W
Power consumption in standby mode
..................................................................... Less than 1 W
Weight...............................................2.9 kg (6 lb 39 oz)
Dimensions ............. 440 (W) x 59 (H) x 318 (D) mm
(17 3/8 (W) x 2 3/8 (H) x 12 9/16 (D) in.)
Operating temperature
21 19 17 15 13 11 9 7 5 3 1
PIN no.
1
3
4
7
Audio 2/R out
Audio 1/L out
GND
15 R out
16 Blank
17 GND
............................ +5 °C to +35 °C (+41 °F to +96 °F)
Operating humidity
B out
19 Video out
21 GND
8
Status
11 G out
....................................5 % to 85 % (no condensation)
S-Video output
Audio output
Y (luminance) - Output level...............1 Vp-p (75
C (color) - Output level................286 mVp-p (75
)
Ω
Ω
Output level
)
During audio output...................2 Vrms (1kHz, 0 dB)
Jacks..............................................................S-VIDEO jack
Number of channels .......................................................2
Jacks .................................................................... RCA jack
Video output
Audio characteristics
Output level ............................................1 Vp-p (75
)
Ω
Frequency response
Jacks .................................................................... RCA jack
................................4 Hz to 44 kHz (DVD fs: 96 kHz)
S/N ratio ...............................................................110 dB
Dynamic range ....................................................100 dB
Total harmonic distortion..............................0.003 %
Wow and flutter: Limit of measurement ( 0.001 % W.
PEAK) or lower
B
R
Component video output (Y, C , C )
Output level.....................................Y: 1.0 Vp-p (75
)
Ω
Ω
B
B
R
R
.......................................C /P , C /P : 0.7 Vp-p (75
)
Jacks .................................................................. RCA jacks
HDMI output
Digital output
Output terminal .................................................... 19-pin
Coaxial digital output......................................RCA jack
Other terminals
Control in/out (USA only).............................RCA jack
USB input (USB 2.0)................................................... 1
Accessories
Remote control ..............................................................1
AAA/R03 dry cell batteries.........................................2
Audio/Video cable (yellow/red/white) ....................1
System control cable (USA only) ..............................1
Power cable.....................................................................1
User Guide (this manual)
Warranty card (USA only)
Note: The specifications and design of this product are
subject to change without notice, due to improvement.
(mm)
440
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
3139 245 31301
2008/09 PMC
541110153029M
Download from Www.Somanuals.com. All Manuals Search And Download.
|