Marantz CD Player CR601 User Manual

Model CR601 User Guide

CD Receiver

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

I.H.T. IEC 825

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Deutsch

CE MARKING

WARNINGS

Do not expose the equipment to rain or moisture.

WARNHINWEISE

- Das Gerät nicht Regen oder Feuchtigkeit

aussetzen.

- Die Abdeckung nicht vom Gerät abnehmen.

- Keine Gegenstände durch die Belüftungsschlitze

stecken.

English

- Do not remove the cover from the equipment.

- Do not insert anything into the equipment

through the ventilation holes.

- Do not handle the mains cord with wet hands.

- Do not cover the ventilation with any items such

as tablecloths, newspapers, curtains, etc.

- No naked flame sources, such as lighted

candles, should be placed on the equipment.

- When disposing of used batteries, please

comply with governmental regulations or

environmental public instruction’s rules that

apply in your country or area.

The CR601 is in conformity with the EMC directive and low-voltage directive.

Français

Le CR601 est conforme à la directive EMC et à la directive sur les basses tensions.

- Das Netzkabel nicht mit feuchten oder nassen

Händen anfassen.

Deutsch

Das Modell CR601 entspricht den EMC-Richtlinien und den Richtlinien für

Niederspannungsgeräte.

Decken Sie die Lüftungsöffnungen nicht mit einem

Tischtuch, einer Zeitung, einem Vorhang usw. ab.

- Es dürfen keine Gegenstände mit offener

Flamme, wie etwa brennende Kerzen, auf dem

Gerät aufgestellt werden.

- Beachten Sie bei der Entsorgung der

verbrauchten Batterien alle geltenden lokalen

und überregionalen Regelungen.

Nederlands

De CR601 voldoet aan de EMC eisen en de vereisten voor laag-voltage.

Español

El CR601 está de acuerdo con las normas EMC y las relacionadas con baja tensión.

Make a space of about 0.2 meter around the unit.

- No objects filled with liquids, such as vases,

shall be placed on the apparatus.

- When the switch is in the OFF position, the

equipment is not completely switched off from

MAINS.

Italiano

- Auf allen Geräteseiten muß ein Zwischenraum

von ungefähr 0,2 meter vorhanden sein.

Il CR601 è conforme alle direttive CEE ed a quelle per i bassi voltaggi.

Auf das Gerät dürfen keine mit Flüssigkeiten gefüllte

Behälter, wie etwa eine Vase, gestellt werden.

Svenska

CR601 är tillverkad i enlighet med EMC direktiven och direktiven för lågvoltsutrusning.

- Wenn der Schalter ausgeschaltet ist (OFF-

Position), ist das Gerät nicht vollständig vom

Stromnetz (MAINS) abgetrennt.

- The Socket-Outlet shall be installed near the

equipment and shall be easily accessible.

ENGLISH:

CAUTION –

- Die Netzsteckdose muss sich in der Nähe des

Gerätes befinden, und ein unbehinderter

Zugang dazu muss jederzeit gewährleistet sein.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

Français

AVERTISSEMENTS

Ne pas exposer l’appareil à la pluie ni à l’humidité.

- Ne pas essayer de retirer le boîtier de l’appareil.

FINNISH:

Nederlands

- Ne rien insérer dans l’appareil par les orifices de

ventilation.

- Ne pas manipuler le cordon d’alimentation avec

les mains mouillées.

- Ne pas recouvrir les ouïes de ventilation avec un

objet quelconque comme une nappe, un journal,

un rideau, etc.

- Ne placer aucune source de flamme nue,

comme une bougie allumée, sur l'appareil.

- Pour mettre au rebut les piles usées, respecter

les lois gouvernementales ou les règlements

officiels concernant l’environnement qui

s'appliquent à votre pays ou région.

- Veiller à ce qu’aucun objet ne soit à moins de

0,2 mètre des côtés de l'appareil.

- Aucun objet rempli de liquide, un vase par

exemple, ne doit être placé sur l'appareil.

- Lorsque l'interrupteur est sur la position OFF,

l'appareil n'est pas complètement déconnecté du

SECTEUR (MAINS).

VAROITUS!

Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa

altistaa käyttäjän turvallisuusluokan 1 ylittävuälle näkymättömälle lasersäteilylle.

WAARSCHUWINGEN

- Stel het apparaat niet bloot aan regen of vocht.

- Verwijder de afdekplaat van het apparaat niet.

- Duw niets door de ventilatieopeningen in het

apparaat.

- Raak het netsnoer niet met natte handen aan.

- Bedek de ventilatieopeningen niet met enige

voorwerpen, zoals tafelkleden, kranten,

gordijnen, enz.

- Plaats geen brandende voorwerpen, zoals

kaarsen, op het apparaat.

- Volg bij het weggooien van verbruikte batterijen

de overheidswetgeving of milieuvoorschriften op

die van kracht zijn in het land of de regio waarin

u zich bevindt.

SWEDISH:

VARNING!

Om apparaten används påannat sätt än vad som beskrivs 1 denna bruksanvisning

kan användaren utsättas för osynlig laserstrålning som overskrider gränsen för

laserklass 1 .

WARNINGS FOR LASER RADIATION

CAUTION : INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

DANGER : INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT

EXPOSURE TO BEAM.

VARO! :

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET

ALTTIINANAKYMÄTTÖMÄALLE LASERSÄTEILYLLE. ÄLÄ KATSO

SÄTEESEEN.

- Zorg dat er 0,2 meter vrije ruimte rond het

toestel is.

- Plaats geen voorwerpen met een vloeistof erin,

zoals een bloemenvaas, op het apparaat.

- Als de schakelaar op OFF staat, is het apparaat

niet volledig losgekoppeld van de netspanning

(MAINS).

VARNING! :OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH

SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRALEN.

- La prise électrique doit se trouver près de

l'appareil et être facilement accessible.

Het stopcontact dient in de buurt van het apparaat

te zitten en eenvoudig bereikbaar te zijn.

Download from Www.Somanuals.com. All Manuals Search And Download.

Español

Svenska

ADVERTENCIAS

- No exponga el equipo a la lluvia ni a la

humedad.

VARNINGAR

- Utsätt inte utrustningen för regn eller fukt.

- Ta inte bort utrustningens hölje.

- No extraiga la tapa del equipo.

- No introduzca nada en el interior del equipo a

través de los orificios de ventilación.

- För inte in föremål i utrustningen genom

ventilationshålen.

- Hantera inte nätsladden med våta händer.

- No maneje el cable de alimentación con las

manos mojadas.

- No cubra la ventilación con objetos como

manteles, periódicos, cortinas, etc.

- No deben colocarse sobre el equipo elementos

con fuego, por ejemplo velas encendidas.

- Cuando se eliminen baterías usadas, deben

cumplirse las reglamentaciones oficiales o las

normas de protección medioambiental

aplicables en su país o en su zona.

- Täck inte för ventilationsöppningarna med några

föremål som till exempel bordsdukar,

dagstidningar, gardiner e.d.

- Inga föremål med öppen låga, som till exempel

tända stearinljus, bör placeras på utrustningen.

- Följ de lagar och miljöskyddsråd som gäller i det

land eller område där du bor när du gör dig av

med batterier.

- Se till att det finns omkring 0,2 meter fri plats

runt omkring enheten.

- Deje un espacio de unos 0,2 metro alrededor de

la unidad.

- No se deben colocar sobre el aparato

recipientes que contengan líquidos, como por

ejemplo jarrones.

- Cuando el interruptor está en la posición OFF, el

equipo no está completamente desconectado de

la alimentación MAINS.

- Inga objekt som är fyllda med någon vätska, till

exempel blomstervaser, bör placeras på

apparaten.

- Även om strömbrytaren står i det avstängda

läget OFF, så är utrustningen inte helt

bortkopplad från det elektriska nätet (MAINS).

- Uttaget ska vara installerat nära utrustningen

och vara lättillgängligt.

- La toma de corriente se debe instalar cerca del

equipo y ser de fácil acceso.

Italiano

AVVERTENZE

Non esporre l’apparecchio alla pioggia o all’umidità.

- Non rimuovere il coperchio dell’apparecchio.

- Non introdurre oggetti all’interno

dell’apparecchio attraverso i fori di ventilazione.

- Non toccare il cavo di alimentazione con le mani

bagnate.

- Non coprire le fessure di ventilazione con

tovaglie, giornali, tende od oggetti analoghi.

- Non posare sull'apparecchio sorgenti di fiamme

scoperte quali candele accese.

- Smaltire le pile usate in conformità alle norme

governative o disposizioni ambientali vigenti nel

proprio paese o zona.

- Lasciare 0,2 metro liberi tutto intorno l'unità.

- Non mettere sull'apparecchiatura alcun

contenitore di liquido, come ad esempio dei vasi.

- Quando l'interruttore è nella posizione OFF,

l'apparecchiatura non

scollegata da MAINS.

completamente

- La presa elettrica dovrebbe essere installata in

prossimità dell'apparecchio ed essere facilmente

accessibile.

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

FEATURES

FEATURES.......................................................................................................1

AMP

• 30W/Ch into 6 ohms (1kHz, 10%)

• Tone Direct

• Tone Control for Treble and Bass

• 3 Audio Inputs and 2 Outputs for Tape, MD, DVD

BEFORE USE...................................................................................................2

PART NAME AND FUNCTIONS ......................................................................5

FRONT PANEL.........................................................................................................5

REAR PANEL ...........................................................................................................6

REMOTE CONTROL ................................................................................................7

• Playback CD-DA and MP3 CDs

• Optical Digital Out

CONNECTIONS ...............................................................................................8

CONNECTING THE ANTENNA TERMINALS..........................................................8

CONNECTING SPEAKERS......................................................................................9

CONNECTING ANALOG / DIGITAL COMPONENTS ............................................10

Tuner

• DAB Equipped for Both Band III and L-Band Reception

• DAB 60 Channels, Group Presets

• AM/FM 40 Channels, Group Presets

BASIC OPERATION.......................................................................................11

General

• Audio Timer

• Sleep Timer

• Display Dimmer

CD OPERATION.............................................................................................12

PLAYING CD .........................................................................................................12

DISPLAYING INFORMATION ...............................................................................14

TUNER OPERATION .....................................................................................15

LISTENING TO FM/AM ..........................................................................................15

LISTENING TO DAB BROADCAST ......................................................................19

SEARCH MODE ....................................................................................................21

SORT MODE (SORTING COMPONENTS) ...........................................................22

A NOTE ABOUT RECYCLING

OTHER OPERATION .....................................................................................24

SETTING THE CLOCK ..........................................................................................24

TIMER PROGRAMS ..............................................................................................25

LAST FUNCTION MEMORY .................................................................................26

INITIALIZATION OF THE MICROPROCESSOR ...................................................26

This product’s packaging materials are recyclable and can

be reused. This product and the accessories packed

together are the applicable product to the WEEE directive

except batteries.

Please dispose of any materials in accordance with your

local recycling regulations.

TROUBLESHOOTING....................................................................................27

SPECIFICATIONS & DIMENSIONAL DRAWINGS........................................29

OTHERS.........................................................................................................29

When discarding the unit, comply with your local rules or

regulations.

Batteries should never be thrown away or incinerated but

disposed of in accordance with your local regulations

concerning chemical wastes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do Not Touch Hot Spots During

and Immediately After Use

About discs

BEFORE USE

This section must be read before any connection is

made to the mains supply.

Playable discs

During and immediately after use, the CR601 is hot

in areas other than the controls and rear panel

connection jacks. Do not touch hot spots and

especially the top panel. Contact with hot areas

can cause burns.

Audio CD (CD-DA)

0.2 m or

Equipment mains working

setting

CD RECEIVER CR601

0.2 m

or more

0.2 m

or more

CD-R/CD-RW

Accessories

INPUT

DIRECT

Your Marantz product has been prepared to

comply with the household power and safety

requirements that exist in your area.

Finalized CD-R and CD-RW discs

recorded in the CD-DA format,

MP3 format can be played with

the unit.

BASS

TREBLE

• Remote control unit (RC601CR) x 1

• Size “AAA” batteries x 2

• AM loop antenna x 1

PUSH TO ENTER

VOLUME

STANDBY

POWER ON / STANDBY

PHONES

CR601 can be powered by 230V AC only.

* Finalize is the process to make a CD-R/CD-RW

playable for players (not recorders)

Recording and playback of any material may

require consent. For further information refer to the

following:

0.2 m

or more

* Some discs may not be able to be played

depending on condition of the discs and

recording software.

– Copyright Act 1956

– Dramatic and Musical Performers Act 1958

– Performers Protection Acts 1963 and 1972

– Any subsequent statutory enactments and

orders

Structure of audio CD

Audio CDs contain music tracks only.

You can play them in conventional style through a

stereo system, using the keys on the remote

control and/or front panel.

Do not locate in the following

places

To ensure long-lasting use, do not locate the

CR601 where:

• FM indoor antenna x 1

• Exposed to direct sunlight.

• Near to sources of heat such as heaters.

• Highly humid or poorly ventilated.

• Dusty.

Noise or disturbance of the picture may be

generated if this unit or any other electronic

equipment using microprocessors is used near a

tuner or TV.

About playing copy-controlled CDs

• Subjected to mechanical vibrations.

If this happens, take the following steps:

Some copy-controlled CDs may not conform to

official CD standards. They are special discs and

may not play on the CR601.

• On wobbly, inclined or otherwise unstable

surfaces

• Install this unit as far as possible from the tuner

or TV.

• DAB indoor antenna x 1

• Radiated heat is blocked such as in cramped

audio racks.

• Set the antenna wires from the tuner or TV away

from this unit’s mains cord and input/output

connection cords.

Discs made on personal computers

To ensure proper heat radiation, ensure the below

clearance from walls and other equipment.

Discs made on personal computers, including

those of a compatible format, may not work

properly in the CR601 because of incorrect

settings in the disc burning software. Check the

manual supplied with your disc burning software

for additional compatibility information.

• Noise or disturbance tends to occur particularly

when using indoor antennas or 300 Ω/ohms

feeder wires. We recommend using outdoor

antennas and 75 Ω/ohms coaxial cables.

• User Guide x 1

• Registration Card x 1

Note

For heat dispersal, do not install this equipment

in a confined space such as a book case or

similar unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

* Use discs which satisfy the CD standards

MP3 compatibility

Notes about the discs

such as those with the “CD logo” or “

mark on their disc label surfaces.

”

• MP3 discs must be ISO 9660 Level 1 or Level 2,

Joliet compliant. Supported formats: Mode 1,

Mode 2.

* Handle the discs carefully so as not to

scratch their surfaces.

No guarantees are made for playback if discs

which do not satisfy the appropriate CD

standards are used.

Similarly, no guarantees are made for their

sound quality even if it is possible to play such

discs.

* Keep the surfaces of the discs clean at all

times.

• Folders can be up to eight levels deep.

•

MP3 ﬁles must be MPEG-1/MPEG-2 Audio Layer

3 format with a sampling rate of between 16 kHz

and 48 kHz and a bit-rate of between 32 kbps and

320 kbps (128 kbps or 192 kbps recommended).

Incompatible ﬁles cannot be played.

When cleaning the surfaces of discs, always be

sure to use the special cleaner and wipe the

surfaces in the directions shown in the figure

below.

* To protect your discs from damage, avoid

placing them in the following locations.

• Fixed bit-rate MP3 ﬁles are recommended,

however, variable bit-rate (VBR) MP3 ﬁles

between 8 kbps and 320 kbps are supported

(Playing times may display incor-rectly).

• Where they will be exposed to direct sunlight

or where they will be close to a heater or other

heat-radiating appliance

• Where the humidity level is high or it is very

dusty

• MP3 ﬁles must have a “.mp3” or “.MP3” ﬁle

name extension. MP3 ﬁles without the proper

extension will not be recognized. To prevent

noise and malfunction, do not use these

extensions for other types of ﬁles.

• Near a window or other such location where

they may be exposed to rain

• Wipe the surface

radially from the

center.

• Do not wipe the

surface in the

circumferential

direction.

* Get into the habit of putting the discs back in

their cases after use.

• The CR601 supports up to 500 MP3 ﬁles and up

to 200 folders per disc. (In this case, Disc and

File names contain 30 characters and Folder

names contain 20 characters.) Files and folders

in excess of this cannot be played. Note that if

the ﬁle and folder structure is very complicated,

the CR601 may not be able to read or play all of

the MP3 ﬁles on the disc. If the disc, folder or ﬁle

names contain many characters, the CR601

may not support 500 MP3 ﬁles.

* Do not attach pieces of paper or stickers to

the label surfaces of the discs.

When a disc has a piece of plastic tape or rental

CD label with paste protruding from the edge or

when a disc still bears traces of sticky tape or

adhesive labels, do not attempt to play it. If

such a disc is played on the CD player, you may

find that you cannot remove it or that some other

kind of malfunctioning may occur.

• Disc names may contain up to 30 characters.

File and folder names may contain up to 60

characters.

• The maximum time that can be displayed for a

single track is 99 minutes and 59 seconds.

• The remaining time cannot be displayed when

playing MP3 ﬁles.

•

Multisession discs are supported, however,

some multisession discs may take a long time to

load and some may not load at all. When burning

CDs we recommend that you use a single

session (disc-at-once), and select “Disc Close.”

* Do not use discs which come in special

shapes.

Do not attempt to play heart-shaped or

octagonal discs or discs with any other special

shapes. You may find that you cannot remove

them or that some other kind of malfunctioning

may occur in the player.

• The ID3 tag version 1.0 is supported.

Notes

• With CD-ROM, CD-R, and CD-RW discs that

contain many ﬁles and folders, and ﬁles other

than MP3s, it may take a long time to read the

disc. We recommend that you include only MP3

ﬁles on your discs, use about 20 folders, and

limit folder nesting to three levels deep.

• In this manual, MP3 ﬁles are referred to as

tracks.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading batteries

Operating range of the

remote control unit

Before using the supplied remote control unit for

the first time, load the batteries in the remote

control unit. The batteries provided are used to

verify the operations of the remote control unit only.

• Point the remote control unit at the remote

sensor on the main unit as shown on the

diagram.

• The remote control unit can be used from a

straight distance of approximately 5 meters from

the main unit, but this distance will be shorter if

there are obstacles in the way or if the remote

control unit is not pointed directly at the remote

sensor.

1. Take hold of the tab on the battery cover which

is found on the back side of the remote control

unit, and pull it up.

• The remote control unit can be operated at a

horizontal angle of up to 30 degrees with respect

to the remote sensor.

2. Take load the two new size “AAA” batteries

inside the battery compartment while taking

care to align their polarities correctly with the

polarity markings (ª with ª and · with ·).

Notes

• It may be difficult to operate the remote control

unit if the remote sensor is exposed to direct

sunlight or strong artificial light.

Size “AAA” (SUM-4)

batteries x 2

• Do not press buttons on the main unit and

remote control unit simultaneously. Doing so

may result in malfunction.

• Neon signs or other devices emitting pulse-type

noise nearby may result in malfunction, so keep

the set as far away from such devices as

possible.

3. Push the battery cover down in the direction of

the arrow to close it.

Approx. 5m

Notes on batteries:

• Replace the batteries with new ones if the set

does not operate even when the remote control

unit is operated nearby the set. (The included

battery is only for verifying operation.)

RC601CR

• To prevent damage or leakage of battery fluid:

– Do not use a new battery together with an old

one.

– Do not use two different types of batteries.

– Do not short-circuit, disassemble, heat or

dispose of batteries in flames.

• If the battery fluid should leak, carefully wipe the

fluid off the inside of the battery compartment

and insert new batteries.

Download from Www.Somanuals.com. All Manuals Search And Download.

q POWER ON/STANDBY button

! Easy JOG PUSH TO ENTER

Press to turn power ON and press again to

switch to STANDBY mode.

CD Mode:

PART NAME AND FUNCTIONS

Preceding or subsequent tracks can be

searched (tracks can be skipped) by turning

the jog dial clockwise or counterclockwise.

Push the this knob during play back CD, jump

to the next track.

FRONT PANEL

w Disc tray

e PHONES jack

Tuner Mode:

For connecting stereo headphones. When the

headphones are connected to this jack, the

speaker sound is turned off.

This knob is used in conjunction with the

MENU button, and is used to select and

determine the operation mode.

! ! ! ! !

o i u y

Also, this knob is used for the TUNING/PRESET

search.

r OPEN/CLOSE 0 button

CD RECEIVER CR601

Press this button to open and close the disc

tray.

In the tuning mode, the reception frequency is

tuned up or down. Turning the control in the

clockwise direction tunes the frequency up.

Tuning the control in the counterclockwise

direction tunes the reception frequency down.

In the preset mode, the selection of the preset

channel is moved up or down. The auto tuning

operation cannot be used when in this mode.

t Master VOLUME Knob

INPUT

DIRECT

To increase or decrease sound level. To

increase the sound level turn clockwise, and to

decrease turn counter-clockwise

BASS

TREBLE

y DIRECT button

PUSH TO ENTER

VOLUME

Used to select “Tone Direct On” or “Tone

Direct Off.”

STANDBY

u MENU button

POWER ON / STANDBY

PHONES

Displays the Tuner menu.

i INPUT button

Used to select sound sources: CD, DAB, FM,

AM, TAPE, MD or DVD.

o Tone Control TREBLE

Adjusts the Treble sound while the Tone Direct

Off is selected.

! Tone Control BASS

Adjusts the Bass sound while the Tone Direct

Off is selected.

! Display

! STOP 7 button

This is used to stop the CD playback.

! IR SENSOR

! PLAY/PAUSE 6 button

This is used to start CD playback or pause CD

playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

a Antenna Terminal for FM Tuner

PART NAME AND FUNCTIONS

REAR PANEL

(75 ohms)

Connect an external FM antenna with a coaxial

cable, or a cable network FM source.

b Antenna Terminal for DAB Tuner

c Antenna Terminal for AM Tuner

(AM, GND)

Connect the supplied AM loop antenna. Use

the terminals marked “AM” and “GND”. The

supplied AM loop antenna will provide good

AM reception in most areas. Position the loop

antenna until you hear the best reception.

SUB

WOOFER

FM(75

Ω)

GND AM

DAB

ANTENNA

d Optical Digital Out Jack (DAB/CD)

DIGITAL

OUT

CD signals during playback are output digitally,

and audio signal during to select the DAB

mode are output digitally , from this optical

jack.

TAPE

DVD

OPT

SPEAKERS

MODEL NO. CR601

e TAPE IN/OUT Jacks

Connect the IN jacks to the output jacks of

Tape recorder and the OUT jacks to Tape

recoder input jacks.

OUT

f MD IN/OUT Jacks

AC IN

Connect the IN jacks to the output jacks of MD

or CD Recoder and the OUT jacks to MD or

CD Recorder input jacks.

g AC Power cable

Connect to an AC power outlet. CR601 to be

h DVD IN Jacks

Connect the IN jacks to the output jacks of

DVD player.

i Subwoofer Preout Jack

Connect to a component speaker input of an

active subwoofer.

j Speaker terminals

Connect the speaker cord , observing the and

polarity of the cord and terminals.

Download from Www.Somanuals.com. All Manuals Search And Download.

⁄ DIMM button

¤ ¢ button

PART NAME AND FUNCTIONS

REMOTE CONTROL

The display’s brightness switches (in three

levels) each time this button is pressed.

Used to select the next track when CD

playback, or to select presets when the radio

used.

STANDBY/ON button

Press to turn power ON and press again to

switch to STANDBY mode.

⁄ AUTO TUNE button

¤ PAUSE 8 button

Press this button in the DAB mode to perform

a local scan (UK band III). (UK stations are in

the range 11B ~12D.)

When the button is held in, the full scan

operation (Full band and L-band) is conducted.

When pressed in the FM mode, receivable FM

stations are automatically stored in the preset

memory in order starting from preset channel

A1.

Used to pause CD playback.

x TIMER button

¤ PLAY 2 button

Used to set the timers.

Used to select the CD mode and start the CD

playback.

CLOCK

CALL

c 5∞ button

‹

¤ REPEAT button

Used to set the timers.

Used to select the MENU mode (UP/DOWN

CURSOR KEY)

TIMER

Used with repeat playback.

⁄ MEMO button

¤ VOLUME 5∞ button

v --/--- button

Frequencies and station names can be stored

in the memory. When this button is pressed,

the “CH” indicator on the display flashes for 10

seconds.

Use the SHIFT button and the Preset channel

buttons during this time to designate the

desired preset channel.

Used to set the volume.

--/---

Used to select the two or three digits CD

tracks.

CLEAR

ENTER

10/0

¤ DISPLAY button

DISPLAY

Used to select the display mode.

b ENTER button

VOL

Used to set the timers/clock and the menu in

tuner/CD mode.

¤ CLEAR button

INPUT

MUTE

VOL

Used with memory playback.

MODE

REPEAT

⁄ DAB button

n MENU button

‹ Nurmeric (ten keypad) button

Used to select DAB tuner.

Used to enter or exit menu mode

Used to select CD tracks, tuner presenting and

recalling stations.

⁄

⁄ SLEEP button

TUNING

PRESET

m MUTE button

⁄

Used with the Sleep Timer function.

Used to mute the CR601.

‹ CLOCK CALL button

DIMM

DAB

⁄

Used to display the current time and used to

set the clock setting.

⁄ SHIFT button

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

, MODE button

Used to select the memory groups, A (1 ~ 10),

B (1 ~ 10), ... F (1 ~ 10).

Used to set Random Play or Memory Play in

CD mode.

Used to select the stereo mode or mono mode

when a FM stereo broadcast is received.

⁄

⁄ FM button

⁄

Used to select FM tuner.

REMOTE CONTROLLER

RC601CR

. INPUT 1 2 button

¤ DIRECT button

Used to select sound sources.

Used to select “Tone Direct On” or “Tone

Direct Off.”

⁄ STOP 7 button

Used to stop the CD playback.

¤ AM button

Used to select AM tuner.

⁄ 1 button

Used to search backward when CD playback,

or to select tuning when the radio used.

¤ 4 button

Used to select the previous track when CD

playback, or to select presets when the radio

used.

⁄ ¡ button

Used to search forward when CD playback, or

to select tuning when the radio used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting a DAB outdoor

antenna

Connection of AM antennas

CONNECTIONS

• If good reception cannot be achieved with the

included DAB indoor antenna, use a DAB

outdoor antenna. Connect an F male type

connector to the coaxial cable and connect the

antenna to the DAB terminal.

1. Push the lever.

CONNECTING THE ANTENNA TERMINALS

DAB outdoor antenna

2. Insert the conductor.

3. Return the lever.

Installing the DAB indoor

antenna

DAB indoor antenna

(Supplied)

^{1. DAB station reception (}ꢀ ^{page 19).}

AM loop antenna

(Supplied)

2. Use “Tuning aid” to set position at which

^{reception sensitivity is optimum (}ꢀ ^{page 21).}

FM outdoor antenna

DAB indoor antenna

assembly

AM loop antenna assembly

1. Remove the vinyl tie and

take out the connection

line.

Direction of broadcasting

station

2. Connect to the AM antenna

terminals.

75 Ω/ohms

COAXIAL cable

3. Bend in the reverse

SUB

WOOFER

FM(75

Ω

)

GND AM

DAB

direction.

ANTENNA

DIGITAL

OUT

TAPE

DVD

OPT

SPEAKERS

FM indoor antenna

(Supplied)

Mount the antenna’s screw

to the stand.

MODEL NO. CR601

a. With the antenna

on top any stable

surface.

Use tape or a

pin to fasten the

tip of the

antenna to the

wall, a rack, etc.

Mount

OUT

AC IN

Notes

b. With the antenna

attached to the

wall.

•

Do not connect two FM antennas simultaneously.

• Even if an external AM antenna is used, do not

disconnect the AM loop antenna.

• Make sure AM loop antenna lead terminals do

not touch metal parts of the panel.

Installation hole Mount on the wall, etc.

• There is a magnetic on the bottom surface of the

DAB indoor antenna. Keep it away from

monitors, etc.

AM outdoor antenna

Ground

Download from Www.Somanuals.com. All Manuals Search And Download.

Before you connect your speakers, read the

following:

Connecting a subwoofer

CONNECTIONS

Use the PRE OUT SUBWOOFER jack to connect

a powered subwoofer (the power amplifier is built

in ). If your subwoofer is a passive type (the power

amplifier is not built in), connect a monaural power

amplifier to the PRE OUT SUBWOOFER jack and

connect the subwoofer to the amplifier.

• Disconnect the mains cord from the wall outlet.

• Read the instructions supplied with your

speakers.

CONNECTING SPEAKERS

• Pay close attention to speaker wiring polarity. In

other words, connect positive ª terminals only

to positive ª terminals, and negative ·

terminals only to negative · terminals. If you

get them the wrong way around, the sound will

be out of phase and will sound odd.

FRONT SPEAKER

RIGHT LEFT

POWERED

SUBWOOFER

Connecting Speaker Wire

1. Strip away approx. 10

mm (3/8 inch) of wire

insulation.

• Only use speakers with an impedance of 6 ohms

or higher. If you use speakers with a lower

impedance, and use the amplifier at high volume

levels for a long period of time, the built-in

protection circuit may be activated.

10 mm (3/8 inch)

2. Twist

the

• Unnecessarily long or very thin speaker wires

may affect the sound quality and should be

avoided.

bared wire

ends tight, to

prevent short

circuits.

• Be careful not to short the positive and negative

connections. Doing so may damage the CR601.

3. Push the terminal lever in

the direction of the arrow,

and keep this condition.

SUB

WOOFER

FM(75

Ω

)

GND AM

DAB

ANTENNA

DIGITAL

OUT

TAPE

DVD

OPT

SPEAKERS

• Don’t connect more than one wire to each

speaker terminal. Doing so may damage the

CR601.

MODEL NO. CR601

4. Insert the bare part of the

wire into the hole in the

side of each terminal.

• If you want to connect a single speaker instead

of a pair, connect it to either the left or right

speaker terminals, not both.

OUT

AC IN

5. Put the terminal lever

back, and make sure it is

fastened securely by

pulling the wire lightly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Making Any

Connections

CONNECTIONS

•

Read the manuals supplied with your components.

CONNECTING ANALOG / DIGITAL COMPONENTS

• Don’t connect the mains cord until you’ve

completed and double-checked all connections.

2CH AUDIO

OUT

DVD PLAYER

Optical Digital Output

The CR601’s optical digital output has a shutter-

type cover that opens when an optical plug is

inserted and closes when it's removed. Push a

plug in all the way.

Caution

To prevent shutter damage, hold the optical plug

straight when inserting and removing.

RCA Connection Color Coding

RCA-type connections are usually color coded: red

and white.

SUB

WOOFER

FM(75

Ω

)

GND AM

DAB

ANTENNA

DIGITAL

OUT

TAPE

DVD

OPT

Use red plugs to connect right-channel audio

inputs and outputs (typically labeled “R”).

Use white plugs to connect left-channel audio

inputs and outputs (typically labeled “L”).

SPEAKERS

MODEL NO. CR601

• Push plugs in all the way to make good

connections (loose connections can cause noise

or malfunctions).

OUT

AC IN

• To prevent interference, keep audio cables away

from mains cords and speaker cables.

DIGITAL IN/OUT

OPTICAL

MD MD/CD

INPUT OUTPUT

ANALOG IN/OUT

CD/MD PLAYER

MD MD/CD

INPUT OUTPUT

CASSETTE TAPE DECK

LINE

IN OUT

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATION

CD RECEIVER CR601

Power Up the CR601

Adjusting the Volume

INPUT

DIRECT

Before connecting the mains cord, complete all

^{connections (}ꢀ ^{page 8 to 10).}

BASS

TREBLE

1. To adjust the volume, use the Master VOLUME

knob t, or the VOLUME buttons ¤.

PUSH TO ENTER

VOLUME

• Turn the Master VOLUME knob t clockwise

to increase the volume, counterclockwise to

decrease it.

1. Connect the mains cord to a suitable wall outlet.

STANDBY

POWER ON

STANDBY

• The CR601 enters Standby mode, and the

PHONES

Standby indicator comes on.

2. To turn on the CR601, press the POWER

Using Headphones

ON/STANDBY switch q or

button z.

You can connect a pair of stereo headphones to

the CR601’s PHONES jack for private listening, as

shown.

• The CR601 comes on, the display lights up,

and the Standby indicator goes off.

• To turn off the CR601, press the POWER

CD RECEIVER CR601

ON/STANDBY switch q or

button z

again. The CR601 enters Standby mode and

the Standby indicator comes on.

INPUT

DIRECT

BASS

TREBLE

CLOCK

CALL

PUSH TO ENTER

VOLUME

Selecting Sound Sources

TIMER

STANDBY

POWER ON STANDBY

PHONES

1. Use the INPUT button i or . to select one of

the following sound sources: CD, DAB, FM,

AM, TAPE, MD and DVD.

--/---

CLEAR

ENTER

• The currently selected source is shown on the

display.

10/0

DISPLAY

Note

VOL

2. If you selected CD, see “PLAYING CD” on page

Always turn down the volume before connecting

your head-phones.

12.

INPUT

MUTE

VOL

• If you selected DAB, see “LISTENING TO

MODE

REPEAT

DAB BROARDCAST” on page 19.

• If you selected AM or FM, see “LISTENING

TO FM/AM” on page 15.

TUNING

PRESET

• If you selected TAPE, MD, or DVD, start

DIMM

DAB

playback on the relevant component.

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

REMOTE CONTROLLER

RC601CR

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat Playback

CD OPERATION

Use the Repeat function to play a track, a folder for

MP3 only or a disc repeatedly.

CD RECEIVER CR601

PLAYING CD

To Select Tracks

INPUT

DIRECT

1. During playback, press the REPEAT button ¤

BASS

TREBLE

On the CR601:

• Turn the Easy JOG 4/¢ knob ! to select a

repeatedly to select repeat mode.

1. Press the POWER ON/STANDBY switch q or

button z to turn on the power.

D-Rpt: Repeat the disc

PUSH TO ENTER

VOLUME

track for playback.

2. Press the OPEN/CLOSE 0 button r to open

the disc tray, put the CD on the tray with the

label-side facing up, and press the

OPEN/CLOSE 0 button r again to close the

tray.

• If you select a track while playback is stopped,

press the Easy JOG 4/¢ knob ! to start

playback.

STANDBY

POWER ON

STANDBY

PHONES

• Press the Easy JOG 4/¢ knob ! to jump to

• Be sure to put 8 cm discs in the center of the

tray.

the next track during playback.

F-Rpt: Repeat current folder (MP3 only)

On the remote controller:

Label side

• Press the ¢ button ¤ to select the next track,

or the 4 button ¤ to select the previous track.

• If you press the 4 button ¤ during playback or

while play-back is paused, the beginning of the

current track is selected.

T-Rpt: Repeat current track

CLOCK

CALL

• If you select a track while playback is stopped,

press the PLAY 2 button ¤ to start playback.

TIMER

3. Press the PLAY/PAUSE 6 button ! or

‹

PLAY 2 button ¤ to start playback.

Note

• Playback starts and the “2” indicator appears

on the display.

--/---

With CDs and MP3 discs that contain many

tracks, playback may take a while to start.

CLEAR

ENTER

10/0

2. To cancel Repeat playback, press the REPEAT

button ¤ repeatedly to turn off the “Rpt”

indicator.

DISPLAY

VOL

To Stop Playback

Selecting Tracks by Number

INPUT

MUTE

VOL

• Press the STOP 7 button ! or ⁄.

Use the number buttons to select specific tracks.

MODE

REPEAT

Notes

1. Use the number buttons to enter a track

To Pause Playback

• If you press the REPEAT button ¤ during

memory playback, your custom program will play

“D-Rpt” and “T-Rpt” only.

number. Playback starts automatically.

⁄

TUNING

PRESET

⁄

• Press the PLAY/PAUSE 6 button ! or

PAUSE 8 button ¤. “8” indicator appears on

the display.

• For MP3 disc, select the serial number assigned

to the track.

DIMM

AUTO TUNE

MEMO

DAB

• If you press the REPEAT button ¤ during

random playback for CD, you will use random

playback repeatedly.

SLEEP

SHIFT

DIRECT

• To enter a track number smaller than or equal to

10, press each Numeric button ‹.

For example, to enter track number 10, press

10/0.

• To resume playback, press the PLAY/PAUSE

6 button ! or PLAY 2 button ¤.

Use the --/--- button v to enter track numbers

above 10.

To Fast Forward or Fast Reverse

(remote controller only)

REMOTE CONTROLLER

RC601CR

• To enter a track number from 11 to 99, press --

/--- button v once.

For example, to enter track number 15, press --

/--- button v , 1 and 5.

• During playback or while playback is paused,

press and hold the ¡ button ⁄ to fast forward,

or the 1 button ⁄ to fast reverse.

• For MP3, fast reverse only works within the MP3

track that is currently playing.

• To enter a track number greater than or equal to

100, press --/--- button v twice.

• If you press the button for more than four

seconds, the fast forward or fast reverse speed

increases.

For example, to enter tranck number 123, press

--/--- button v twice, 1, 2 and 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

To Stop Memory Playback

CD OPERATION

• Press the STOP 7 button ! or ⁄.

CD RECEIVER CR601

Random Playback

Memory Playback

To Remove the Last Track in

the Program

INPUT

DIRECT

Use the Random function to play tracks in random

order.

Use the Memory function to make a custom

program of your favourite tracks.

BASS

TREBLE

• While memory playback is stopped, press the

CLEAR button ¤. Each time you press it, the

last track in the program is removed.

PUSH TO ENTER

VOLUME

1. While stopped, press the MODE button ,

repeatedly until the “Mem” indicator appears on

the display.

repeatedly to display “D-Rdm” indicator.

STANDBY

POWER ON

STANDBY

PHONES

To Cancel Memory Playback

2. To add a track to your program, use the 4

button ¤ and ¢ button ¤ to select it, and

then press the ENTER button b.

2. Press the PLAY 2 button ¤ to start random

• While memory playback is stopped, press the

MODE button , repeatedly until the “Mem”

indicator disappears. The entire program will be

deleted.

playback.

• All tracks are played in random order.

3. To start memory playback, press the PLAY 2

button ¤.

3. To cancel random playback, stop playback, and

then press the MODE button , repeatedly until

the “Rdm” indicator disappears.

Notes

Advice

• If the total playing time of your program exceeds

99 minutes and 59 seconds, "--:--" is displayed.

(This does not affect program playback.)

• Memory playback stops automatically when all

CLOCK

CALL

the tracks in the program have been played.

• You can add up to 20 tracks to your program.

TIMER

• The program is deleted when the disc tray is

opened or select the CD normal play mode by

MODE button ,.

• Tracks can also be added by using the number

buttons.

• For information on using the number buttons to

select a track, see “Selecting Tracks by Number”

on page 20.

--/---

CLEAR

ENTER

10/0

DISPLAY

• You can check which tracks you’ve added to the

program by using the 1 button ⁄ and ¡

button ⁄.

VOL

INPUT

MUTE

VOL

MODE

REPEAT

⁄

TUNING

PRESET

⁄

DIMM

DAB

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

REMOTE CONTROLLER

RC601CR

Download from Www.Somanuals.com. All Manuals Search And Download.

CD OPERATION

DISPLAYING INFORMATION

MP3 Disc

CLOCK

CALL

Elapsed track time:

The length of time that the current track has

been playing (default display).

This section explains how to display various

information, including the remaining track time,

remaining disc time, and ID3 tag for MP3 tracks.

TIMER

1. During playback, press the DISPLAY button ¤

repeatedly to cycle through the following

options.

--/---

CLEAR

ENTER

10/0

DISPLAY

VOL

Track name:

Name of the current track.

Audio CD

INPUT

MUTE

VOL

MODE

REPEAT

Elapsed track time:

The length of time that the current track has

been playing (default display).

TUNING

PRESET

DIMM

DAB

Folder name:

Name of the current folder.

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

Remaining track time:

The amount of time remaining for the current

track (“R” indicator appears).

REMOTE CONTROLLER

RC601CR

Title name:

Title of the current track (if ID3 tag present).

Remaining disc time:

The amount of time remaining for the entire disc

(“T” indicator appears).

Notes

• To display the disc name, while playback is

stopped, press the DISPLAY button ¤.

• If a track or folder name contains a character

that cannot be displayed, it will be displayed as

“*”.

Download from Www.Somanuals.com. All Manuals Search And Download.

8. Either turn the Easy JOG 4/¢ knob ! or

7. Press the Easy JOG 4/¢ knob ! or ENTER

press the 1 button ⁄ or ¡ button ⁄.

button b to set the manual tuning mode.

TUNER OPERATION

• Automatic searching begins, then stops when

a station tuned in.

LISTENING TO FM/AM

Default value

STEREO receive mode

Auto tuner presets

FM Auto preset memory

8. Either turn the Easy JOG 4/¢ knob ! or

press the 1 button ⁄ or ¡ button ⁄ to tune

in the desired station.

87.5 / 89.1 / 98.1 / 108 / 90.1 / 90.1 /

90.1 / 90.1 / 90.1 / 90.1 MHz

1. Press the POWER ON/STANDBY switch q or

A1 ~ A10

B1 ~ B10

button z to turn on the power.

TUNED mode

522 / 603 / 999 / 1404 / 1611 kHz,

90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz

• The frequency changes continuously when

the 1 button ⁄ or ¡ button ⁄ on the

remote control unit is held in.

2. Watching the display, press the INPUT button

AUTO TUNING mode

i or . or FM button ⁄ to select the FM band.

C1 ~ C10 90.1 MHz

D1 ~ D10 90.1 MHz

Notes

i u

• When in the auto tuning mode on the FM band,

CD RECEIVER CR601

the

broadcast is tuned in. At open frequencies, the

noise is muted and the tuned off.

display on the panel when the stereo

Auto tuning (FM/AM)

3. Press the AUTO TUNE button ⁄.

INPUT

DIRECT

BASS

TREBLE

• If the signal is weak, if may be difficult to tune

into the station in stereo. In such a case, press

the MODE button , on the remote control. FM

stereo broadcasts are received in monaural and

1. Press the POWER ON/STANDBY switch q or

button z to turn on the power.

PUSH TO ENTER

VOLUME

2. Watching the display, press the INPUT button

i or . or FM button ⁄ or AM button ¤ to

select the desired band (AM or FM).

STANDBY

the

is not illuminated. To return to stereo

POWER ON

STANDBY

PHONES

4. Press the ENTER button b.

mode, press the MODE button , on the remote

control again.

• The unit automatically begins searching for

FM broadcast stations.

• If tuning does not stop at the desired station.

Use “Manual tuning” operation.

3. Press the MENU button u or n to select

Manual tuning (FM/AM)

CLOCK

CALL

menu.

1. Press the POWER ON/STANDBY switch q or

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “Search

Mode”.

• When the first FM broadcast station is found,

that station is stored in the preset memory at

channel A1.

TIMER

button z to turn on the power.

2. Watching the display, press the INPUT button

i or . or FM button ⁄ or AM button ¤ to

select the desired band (AM or FM).

• Subsequent stations are automatically stored

in order at preset channels A1 to A10, B1 to

B10, C1 to C10, D1 to D10 for a maximum of

40 stations.

--/---

CLEAR

ENTER

10/0

3. Press the MENU button u or n to select

DISPLAY

menu.

VOL

• Channel A1 is tuned in after the auto preset

memory operation is completed.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “Search

Mode”.

5. Press the Easy JOG 4/¢ knob ! or

INPUT

MUTE

VOL

ENTER button b to set search mode.

MODE

REPEAT

Note

6. Either turn the Easy JOG 4/¢ knob ! or

5. Press the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “Auto”.

• If an FM station cannot be preset automatically

due to poor reception, use the “Manual tuning”

operation to tune in the station, then preset it

using the manual “Preset memory” operation.

ENTER button b to set search mode.

TUNING

PRESET

⁄

6. Either turn the Easy JOG 4/¢ knob ! or

⁄

DIMM

DAB

press the 5 or ∞ button c to select “Manual”.

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

•

To interrupt this function, press the POWER

ON/STANDBY switch q or button z

⁄

7. Press the Easy JOG 4/¢ knob ! or

• Perform this operation from the remote control

unit.

ENTER button b to set the auto tuning mode.

REMOTE CONTROLLER

RC601CR

Download from Www.Somanuals.com. All Manuals Search And Download.

• This allows you to easily find out the latest

traffic conditions in your area before you

leaving home.

RDS (Radio Data System)

TUNER OPERATION

• RDS (works only on the FM band) is a

broadcasting service which allows station to

send additional information along with the

regular radio program signal.

• Radio Text (RT)

Preset stations (FM/AM)

1. Use the “Auto tuning” or “Manual tuning”

operation to tune in the station to be preset in

the memory.

Recalling preset stations

(FM/AM)

• RT allows the RDS station to send text

messages that appear on the display.

• The following three types of RDS information

On the CR601:

1.Press the POWER ON/STANDBY switch q to

can be received on this unit:

Note

2. Press the MENU button u or n to select

• The operations described below pressing the

DISPLAY button ¤ will not function in areas in

which there are no RDS broadcasts.

turn on the power.

• Program Type (PTY)

menu.

2. Watching the display, press the INPUT button

• PTY identifies the type of RDS program.

3. Either turn the Easy JOG 4/¢ knob ! or

i to select FM or AM.

• The program types and their displays are as

follows:

press the 5 or ∞ button c to select “Memory”.

i u

3. Press the MENU button u to select menu.

4. Turn the Easy JOG 4/¢ knob ! to select

CD RECEIVER CR601

NEWS

News

“Search Mode”.

AFFAIRS

INFO

Current Affairs

Information

Sports

INPUT

DIRECT

BASS

TREBLE

SPORT

4. Press the Easy JOG 4/¢ knob !, or

ENTER button b to set the preset mode and

make the preset channel number flash.

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

POP M

Education

Drama

PUSH TO ENTER

VOLUME

5. Press the Easy JOG 4/¢ knob ! to set

STANDBY

Culture

POWER ON

STANDBY

PHONES

search mode.

Science

6. Turn the Easy JOG 4/¢ knob ! to select

Varied

“Preset”.

Pop Music

Rock Music

Easy Listening Music

Light Classical

• Steps 1 to 4 can be skipped when using the

MEMO ⁄ button.

When this button is pressed, the preset

memory standby mode is set, regardless of

the menu setting at that time.

ROCK M

EASY M

LIGHT M

CLOCK

CALL

CLASSICS Serious Classical

OTHER M Other Music

WEATHER Weather

FINANCE Finance

CHILDREN Children’s Programs

7. Press the Easy JOG 4/¢ knob ! and set

5. While the preset channel number is flashing,

either press the SHIFT button ⁄ to select the

desired memory group (A to D).

the preset mode.

TIMER

‹

6. While the preset channel number is flashing,

either turn the Easy JOG 4/¢ knob !,

press the 5 or ∞ button c or Numeric button

‹ to select the desired preset channel (1 to

10).

--/---

CLEAR

ENTER

SOCIAL

RELIGION

PHONE IN

TRAVEL

LEISURE

JAZZ

Social Affairs

Religion

10/0

DISPLAY

8. Watching the display, turn the Easy JOG

4/¢ knob ! to select the desired preset

channel.

VOL

Phone In

Travel

INPUT

MUTE

VOL

7. While the preset channel number is flashing,

either press the Easy JOG 4/¢ knob ! or

MEMO button ⁄ to store the station in the

preset memory.

MODE

REPEAT

Leisure

On the remote controller:

Jazz Music

-1

1 . Press the 4 button ¤ or ¢ button ¤ to

COUNTRY Country Music

TUNING

PRESET

select the desired preset channel.

• To preset other channels, repeat steps 2 to 6.

NATION M National Music

-2

⁄

1 .Press the SHIFT button ⁄ and select the

DIMM

DAB

• A total of 40 broadcast stations can be preset

— 10 stations (channels 1 to 10) in each of

groups A to D.

OLDIES

FOLK M

Oldies Music

Folk Music

desired memory group (A to D) .

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

-3

1 .Press the Numeric button ‹ to select the

DOCUMENT Documentary

desired preset channel (1 to 10).

⁄

• Traffic Program (TP)

REMOTE CONTROLLER

RC601CR

• TP identifies programs that carry traffic

announcements.

Download from Www.Somanuals.com. All Manuals Search And Download.

• The station name is displayed on the display

after searching stops.

8. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c. The RDS search

automatically begins and the “RDS Search”

blinks.

TUNER OPERATION

RDS search

• If no other RDS station is found when all the

frequencies are searched, “NO RDS” is

displayed.

• If there is no station broadcasting the

designated program type above operation, all

the reception bands are searched.

Use this function to automatically tune to FM

stations that provide RDS service.

• If no other TP station is found when all the

frequencies are searched, “NO programme”

is displayed.

• The station name is displayed on the display

after searching stops.

1. Press the MENU button u or n to select

PTY search

• Use this function to find RDS stations

menu.

broadcasting a designated program type (PTY).

• For a description of each program type, refer to

“Program Type (PTY)”.

• If no other station broadcasting the

designated program type is found when all the

frequencies are searched, “NO programme”

is displayed.

CD RECEIVER CR601

2. Either turn the Easy JOG 4/¢ knob ! or

1. Press the MENU button u or n to select

press the 5 or ∞ button c to display “RDS”.

menu.

INPUT

DIRECT

2. Either turn the Easy JOG 4/¢ knob ! or

BASS

TREBLE

press the 5 or ∞ button c to display “RDS”.

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the RDS search

selection mode.

PUSH TO ENTER

VOLUME

TP search

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the RDS search

selection mode.

Use this function to find RDS stations broadcasting

traffic program (TP).

STANDBY

POWER ON

STANDBY

PHONES

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display “PTY

Search”.

1. Press the MENU button u or

2. Either turn the Easy JOG 4/¢ knob ! or

to select menu.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display “RDS

Search”.

press the 5 or ∞ button c to display “RDS”.

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the RDS search

selection mode.

CLOCK

CALL

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the PTY search

selection mode.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display “TP

Search”.

TIMER

5. Press the Easy JOG 4/¢ knob ! or

ENTER b button to set the RDS search

standby mode.

6. Watching the display, either turn the Easy JOG

4/¢ knob ! or press 5 or ∞ button c to

call out the desired program type.

--/---

CLEAR

ENTER

10/0

DISPLAY

VOL

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the TP search standby

mode.

INPUT

MUTE

VOL

6. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c. The RDS search

automatically begins and the “RDS Search”

blinks.

MODE

REPEAT

• When receiving an RDS station, its program

type is displayed first.

TUNING

PRESET

• If no RDS station is found with above

operation, all the reception band are

searched.

• When not receiving an RDS station, “PTY”

flashes.

DIMM

DAB

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

7. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the PTY search

standby mode.

6. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c. The RDS search

automatically begins and the “RDS Search”

blinks.

• When the broadcast station is found, that

station’s name appears on the display.

REMOTE CONTROLLER

RC601CR

• If no TP station is found with above operation,

all the reception bands are searched.

Download from Www.Somanuals.com. All Manuals Search And Download.

Switching RDS information

display

TUNER OPERATION

RT (Radio Text)

CD RECEIVER CR601

1. Use the procedure described at “Auto tuning”,

“Manual tuning” or “Recalling preset stations” to

tune in a frequency with an RDS station.

CT (Clock Time)

INPUT

DIRECT

BASS

TREBLE

1. Press the MENU button u or

to select menu.

• You can set clock time automatically by using

the RDS stations broadcasting Clock Time (CT)

information.

2. Press the DISPLAY button ¤ to switch the

2. Either turn the Easy JOG 4/¢ knob ! or

PUSH TO ENTER

VOLUME

RDS reception information.

press the 5 or ∞ button c to display “RDS”.

• The display switches as shown below each

time the DISPLAY button ¤ is pressed.

This unit picks CT information up and

automatically resets itself, when you set “CT

ON”.

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the RDS search

selection mode.

STANDBY

POWER ON

STANDBY

PHONES

q PS:

The program service name and frequency

of the station tuned in is displayed.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display “RT

ON/OFF”.

1. Press the MENU button u or

to select menu.

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display “RDS”.

CLOCK

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the RDS search

selection mode.

CALL

TIMER

The above is an example for when there is

TP data but no RT data.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display “CT

ON/OFF”.

5. Press the Easy JOG 4/¢ knob ! or

ENTER button

to set the RT ON/OFF

--/---

selection mode.

CLEAR

ENTER

w PTY:

10/0

6. Either turn the Easy JOG 4/¢ knob !,

press the 5 or ∞ button c to choose the “RT

ON” or “RT OFF”.

The program type of the tuned in

broadcast is displayed.

DISPLAY

VOL

INPUT

MUTE

VOL

MODE

REPEAT

5. Press the Easy JOG 4/¢ knob ! or

ENTER button

to set the CT ON/OFF

selection mode.

TUNING

PRESET

6. Either turn the Easy JOG 4/¢ knob !,

press the 5 or ∞ button c to choose the “CT

ON” or “CT OFF”.

7. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set whether to enable or

stop the RADIO TEXT function.

DIMM

DAB

e CT:

The current time is displayed.

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

• If no text data is being broadcast, “NO TEXT

DATA” is displayed.

REMOTE CONTROLLER

RC601CR

7. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set whether enable or stop

the CT function.

• If you live close to the border with another

country, the CT information may have been

taken from a radio station in another time

zone.

In this case you should select “CT OFF”.

In this mode, although “CT” data are entered,

the time is not changed to the current time.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 4 button ¤ or ¢ button ¤ to

select the station.

Tuning in DAB (Digital Audio

Broadcasting) broadcasts

TUNER OPERATION

• About Secondary service

1. Press the POWER ON/STANDBY switch q or

LISTENING TO DAB BROADCAST

button z to turn on the power.

If a secondary service exists, the “>” symbol

will light up in the “Ensemble No. & Freq.”

Press the ENTER button b to select the

secondary service. While the secondary

service is selected, the “<” symbol will light up

on the display. Press the ENTER button b to

go back to the primary service.

2. Watching the display, press the DAB button ⁄

or INPUT button i or . to select the desired

band (DAB).

About DAB (Digital Audio Broadcasting)

• Since the DAB system is broadcasted in digital format, DAB system can supply crystal-clear audio and

stable reception even in mobile objects. DAB is a new generation radio which can provide data service

and supplementary multi-media services.

• DAB broadcasts multiple services under one Ensemble that are called service components.

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to listen to the selected

station.

• Each component contains inherent programs; news, music, sports, and many more.

3. Watching the display, press the AUTO TUNE

• Each Ensemble and service component has its label, and users can recognize a current broadcasting

station and service contents by using the label.

button ⁄ to start automatically scanning.

• After “Now tuning…” is displayed, the tuned

in station appears.

• The main service component is broadcast as Primary while the others are broadcast as Secondary.

• Also rich character information is serviced through Dynamic Labels; song title, artist composer etc.

DAB Service Diagram

DAB Signal

Tune in the first broadcast station.

Ensemble

Name

Ensemble

National DAB

(Service 2)

(Service 1)

(Service 3)

(Service 4)

Service

Components

• Using the DAB for the first time

Alpha 1

(Primary)

Parliament

(Secondary)

Alpha 2

Sports

Alpha 3

Classic

Alpha 4

Educate

Station Name

Program type

When you first switch on the unit and select

DAB, the Auto Tuning function scans the Band

III and L-band frequencies. After the scanning,

the first scanned component will be selected.

To listen to other stations, use one of the

search modes shown below.

Pop Music

News

Press the AUTO TUNE button ⁄ and release

it in less than 2 seconds to perform a local

scan (UK band III).

(UK stations are in the range 11B to 12D).

Press the button for over 2 seconds then

release it to perform the full scan operation

(Full band III and L-band: 5A to LW).

Once auto scanning is completed, the number

of broadcast stations is displayed, then the

first station is tuned in.

If “Station not available” is displayed, check

^{the antenna’s connection (}ꢀ ^{page 8).}

You may want to re-tune at a later date if you

move the CR601 or if you want to receive a

newly introduced ensemble.

Press the AUTO TUNE button ⁄.

Download from Www.Somanuals.com. All Manuals Search And Download.

TUNER OPERATION

Preset stations

1. Follow steps 1 to 4 under “Tuning in DAB

(Digital Audio Broadcasting) broadcasts” to tune

in the station to be preset.

CD RECEIVER CR601

INPUT

DIRECT

2. Perform steps 2 to 7 under “Preset Stations

BASS

TREBLE

(FM/AM)”.

PUSH TO ENTER

VOLUME

• Up to 60 “S. Component” can be preset (DAB

alone).

STANDBY

POWER ON

STANDBY

PHONES

Recalling preset stations

^{The same procedure as for FM/AM stations. (}ꢀ

page 16)

1. Perform steps 1 to 7 under “Preset stations

CLOCK

^{(FM/AM)” (}ꢀ ^{page 16)}

CALL

2. Press the Easy JOG 4/¢ knob ! or

ENTER button b to listen to the selected

station.

TIMER

• After “Now tuning...” is displayed, the tuned

in station appears.

--/---

CLEAR

ENTER

10/0

DISPLAY

VOL

INPUT

MUTE

VOL

MODE

REPEAT

TUNING

PRESET

⁄

DIMM

DAB

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

⁄

REMOTE CONTROLLER

RC601CR

Download from Www.Somanuals.com. All Manuals Search And Download.

8. Press the Easy JOG 4/¢ knob ! or

ENTER button b to display the first channel on

this ensemble (Sounds comes out).

Tuning aid

TUNER OPERATION

SEARCH MODE

1. Press the MENU button u or

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display the

search mode selection screen.

to select menu.

• The search mode at this time is set to “Sorted

list search mode”.

Preset search mode

1. Press the MENU button u or n to select

Sorted list search mode

menu.

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display the

search mode selection screen.

• You can select any component for listening from

the list of sorted components.

• The sorted components are set in the sort mode.

3. Press the Easy JOG 4/¢ knob ! or

⁽ꢀ ^{page 22)}

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the search mode.

1. Press the MENU u or n button to select

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “Search

Mode (Preset)”.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 4 button ¤ or ¢ button ¤ to

select “Search Mode (Tuning aid)”.

menu.

CD RECEIVER CR601

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display the

search mode selection screen.

INPUT

DIRECT

BASS

TREBLE

PUSH TO ENTER

VOLUME

STANDBY

POWER ON

STANDBY

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to display the first channel at

Preset.

PHONES

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to display the first channel at

Tuning aid.

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the search mode.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “Search

Mode (Sorted List)”.

CLOCK

CALL

• You can select any component from the

preset.

6. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display the

frequency of the ensemble that you want to

receive.

TIMER

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to display the first channel on

the Sorted List.

--/---

CLEAR

ENTER

10/0

DISPLAY

VOL

INPUT

MUTE

VOL

MODE

REPEAT

7. Press the Easy JOG 4/¢ knob ! or

ENTER button b to display the signal strength

for that ensemble.

• You can select any component from the

TUNING

PRESET

sorted list.

• Move antenna while watching the display and

to try to raise the current level to the “>”

symbol.

DIMM

DAB

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

REMOTE CONTROLLER

RC601CR

Download from Www.Somanuals.com. All Manuals Search And Download.

PTY

TUNER OPERATION

The “S.Component” is sorted in the order of the

program Type.

CD RECEIVER CR601

1. Press the MENU button u or n to select

SORT MODE

S. component

INPUT

DIRECT

menu.

BASS

TREBLE

(SORTING COMPONENTS)

• You can select an S.component for listening

from the list of scanned S.components produced

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display the sort

mode selection screen.

PUSH TO ENTER

VOLUME

• You can sort and list scanned components by

Alphanumeric, S. component or program type.

^{by using the “Tuning in DAB broadcasts” (}ꢀ

page 19)

STANDBY

3. Press the Easy JOG 4/¢ knob ! or

POWER ON

STANDBY

PHONES

• You can then select the component you want to

listen to from the list.

• The “S. Component” is sorted in the order of the

Service component frequencies.

ENTER button b to set the sort mode.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “Sort Mode

(PTY)”.

1. Press the MENU button u or n to select

menu.

Alphanumeric

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display the sort

mode selection screen.

The “S.Component” is sorted in alphanumerical

order.

CLOCK

CALL

1. Press the MENU button u or n to select

3. Press the Easy JOG 4/¢ knob ! or

menu.

TIMER

ENTER button b to set the sort mode.

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display the sort

mode selection screen.

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the sort mode to “Sort

Mode (PTY)”.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “Sort Mode

(S. Component)”.

--/---

CLEAR

ENTER

10/0

• You can select any component from the

sorted list.

DISPLAY

VOL

INPUT

MUTE

VOL

MODE

REPEAT

3. Press the Easy JOG 4/¢ knob ! or

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the sort mode to “Sort

Mode (S. Component)”.

ENTER button b to set the sort mode.

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “Sort Mode

(Alphanumeric)”.

TUNING

PRESET

• You can select any component from the

sorted list.

DIMM

DAB

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

REMOTE CONTROLLER

RC601CR

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set the sort mode to “Sort

Mode (Alphanumeric)”.

• You can select any component from the

sorted list.

Download from Www.Somanuals.com. All Manuals Search And Download.

DRC (Dynamic Range Control)

TUNER OPERATION

• The DRC (Dynamic Range Control) function lets

you change the dynamic range of the received

sound depending on the content of the

broadcast so that the sound is easier to hear

even when the volume is low.

CD RECEIVER CR601

t Audio Information :

Switching the DAB

information display

INPUT

DIRECT

The bit rate and mode of the broadcast

being received is displayed.

BASS

TREBLE

1. Press the MENU button u or

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to display the DRC

value mode selection screen.

to select menu.

1. Follow steps 1 to 4 under “Tuning in DAB

PUSH TO ENTER

VOLUME

^{(Digital Audio Broadcasting) broadcasts” (}ꢀ

page 19) to tune in a DAB station.

STANDBY

POWER ON

STANDBY

PHONES

2. Press the DISPLAY button ¤ to switch the

DAB reception information.

3. Press the Easy JOG 4/¢ knob ! or

• The display switches as shown below each

time the DISPLAY button ¤ is pressed.

ENTER button b to set the DRC value mode.

y Time and Date :

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to choose the “DRC

ON” or “DRC OFF”.

The current time and date are displayed.

q DLS (Dynamic Label Segment) :

The text data included in the broadcast

scrolls.

CLOCK

CALL

TIMER

DRC OFF: DRC is switched off.

Any DRC level broadcast will be

ignored. This is the default

setting.

u Bit Error Rate :

--/---

CLEAR

ENTER

10/0

Noise may be generated and reception

quality may become poor at bit error rates

above 0.05. If a rate above 0.05 is

displayed, move the antenna in different

directions to find a position where the rate

displayed is less than 0.05.

DISPLAY

w Ensemble Name :

VOL

The ensemble name is displayed.

DRC ON: Applies DRC level as sent with the

INPUT

MUTE

VOL

broadcast.

MODE

REPEAT

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to set DRC function.

TUNING

PRESET

• This is effective when in a noisy environment

and in quiet sections of broadcast programs.

DIMM

DAB

The broadcast’s DRC level is set at the

broadcast station.

e PTY (Program Type) :

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

The category of the broadcast being

received is displayed.

The DRC can be changed to achieve the

optimum level.

REMOTE CONTROLLER

RC601CR

r Channel and Frequency :

The frequency is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

7. Press the 5 or ∞ button c to set the minutes,

and press the ENTER button b. The display

flashes.

OTHER OPERATION

CD RECEIVER CR601

Muting the CR601

SETTING THE CLOCK

Present time setting

INPUT

DIRECT

Use this function to mute the output of the CR601

temporarily.

5 5

BASS

TREBLE

PUSH TO ENTER

VOLUME

• To operate the timer program, you must set the

present time.

The clock time can be set 12-hour or 24-hour

system.

The clock displays “SUNDAY” “12H SYSTEM”

“0:00AM” at initial.

8. Press the ENTER button b to confirm the

1. Press the MUTE button m.

actual time. The clock now starts.

• The output is muted and “Muting” flashes on

STANDBY

• In the event of a power failure or when the AC

mains cord is disconnected. You must reset

the clock.

POWER ON

STANDBY

PHONES

the display.

2. To unmute the CR601, press the MUTE button

m again, or adjust VOLUME 5∞ button ¤.

1. Press the CLOCK CALL button ‹. Then the

• The output is unmuted and “Muting” goes off.

Displaying present time

“CLOCK 0:00AM” is displayed.

Note

1. A present time can be displayed for 5 seconds

CLOCK

CALL

The Mute function is cancelled when the CR601

is set to Standby.

by pressing the CLOCK CALL button ‹.

‹

TIMER

2. Press the ENTER button b, the day of the

Adjusting the Bass & Treble

week flashes.

--/---

Use the Bass and Treble functions to adjust the

tone of the sound to your personal preference.

CLEAR

ENTER

10/0

DISPLAY

Displaying present time in

Standby mode

VOL

1. Press the DIRECT button y or ¤ to select

INPUT

MUTE

VOL

“Tone Direct Off”.

MODE

REPEAT

3. Press the 5 or ∞ button c to select a day.

If you want to be displayed the present time in

Standby mode, press the CLOCK CALL button ‹

in Standby mode.

2. Use the Tone control Bass knob ! or the

Tone control TREBLE knob o to adjust the

bass or treble.

4. Press the ENTER button b, “12H SYSTEM” is

flashes.

TUNING

PRESET

Note

DIMM

DAB

Setting the CR601 to display the present time

will slightly increase the power consumption in

Standby mode.

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

Using Direct Mode

In Direct mode, the bass and treble tone circuits

are bypassed, creating a shorter signal path for a

purer sound.

If you want to select 24H SYSTEM, either press

the 5 or ∞ button c.

REMOTE CONTROLLER

RC601CR

5. Press the ENTER button b to set the desired

1. Press the DIRECT button y or ¤ to select

system. The hour digit flashes.

“Tone Direct On”.

2. To turn off Direct mode, press the DIRECT

button y or ¤ again to select “Tone Direct Off”.

6. Press the 5 or ∞ button c to set the hours and

press the ENTER button b. The minute digit

flashes.

Download from Www.Somanuals.com. All Manuals Search And Download.

6. The display indicate “TIMER PROGRAM x

FM/AM”. Either turn the Easy JOG 4/¢

knob ! or press the 5 or ∞ button c, the

display changes “TIMER PROGRAM x FM/AM”

or “TIMER PROGRAM x DAB”.

10. Set the On time.

OTHER OPERATION

TIMER PROGRAMS

Timer Program Setting

• You must set the clock time before you set the

timer programs.

About the Timer Programs

q Either turn the Easy JOG 4/¢ knob !

or press the 5 or ∞ button c to adjust the

hour for the On time and press the Easy

JOG 4/¢ knob ! or ENTER button

• This unit has three timer programs so that you

can turn it on and off automatically at certain

times and on certain days of the week.

• You need to store preset stations before you set

the timer programs.

7. Press the Easy JOG 4/¢ knob ! or

ENTER button b to select “CD”, “DAB”,

“FM/AM”, “TAPE”, “MD” or “DVD”.

1. Press the TIMER button x, “TIMER

• Timer programs can be set for single operation

(Once) or everyweek operation (Everyweek) or

everyday operation (Everyday) or the days of

the week operation (Weekday).

PROGRAM 1” is displayed.

w Either turn the Easy JOG 4/¢ knob !

or press the 5 or ∞ button c to adjust the

minutes for the On time and press the

Easy JOG 4/¢ knob ! or ENTER

button b.

8. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select Preset

station to be programed.

Timer Program Examples

11. Set the Off time.

2. The display changes as follows each time the

Easy JOG 4/¢ knob ! is turned or the 5

or ∞ button c is pressed.

• The following examples highlight some of the

ways in which you can use the timer programs.

Timer program 1: To wake up to your favorite

radio station every morning, set as follows:

TIMER PROGRAM 1

TIMER PROGRAM 2

9. Select the Operation method.

TIMER PROGRAM 3

TIMER PROGRAM 1 SET → FM/AM → A1 FM

87.50MHz → EVERYDAY → ON TIME=

7:00AM → OFF TIME= 7:30AM

(If you want a radio alarm only on weekdays,

select “WEEKDAY” instead of “EVERYDAY”

and specify “MON-FRI”.)

Timer program 2: To listen a radio program on

only this Sunday, set as follows:

TIMER PROGRAM 2 SET → FM/AM → B1

AM522kHz → ONCE → SUNDAY → ON

TIME= 9:00PM → OFF TIME=10:00PM

q Either turn the Easy JOG 4/¢ knob !

or press the 5 or ∞ button c to adjust the

hour for the Off time and press the Easy

JOG 4/¢ knob ! or ENTER button

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b to select timer program

number.

4. The display indicate “TIMER PROGRAM x

Either turn the Easy JOG 4/¢ knob !

or press the 5 or ∞ button c to select

operation method “ONCE”, “EVERYWEEK”,

“EVERYDAY” or “WEEKDAY” .

SET”.

w Either turn the Easy JOG 4/¢ knob !

or press the 5 or ∞ button c to adjust the

minutes for the Off time.

12. Set the timer program.

w Press the Easy JOG 4/¢ knob ! or

ENTER button b to decide the operation.

When you select “ONCE” or “EVERYWEEK”,

you can select the day of the week by turning

the Easy JOG 4/¢ knob ! or pressing

the 5 or ∞ button c.

q Press the Easy JOG 4/¢ knob ! or

ENTER button b to decide the timer

program setting.

Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c, the display changes

as follows.

Timer Program Overlap

• If two or three timer programs are set to the

same ON TIME, the timer program with the

lowest number has priority.

Standby indicator lights up green and

setting contents are scrolled.

TIMER PROGRAM x SET

TIMER PROGRAM x CONFIRM

TIMER PROGRAM x ON

When you select “WEEKDAY”, use the

Easy JOG 4/¢ knob ! or pressing

the 5 or ∞ button c to select the first day,

and then press the Easy JOG 4/¢

knob ! or ENTER button b.

Use the Easy JOG 4/¢ knob ! or

pressing the 5 or ∞ button c to select the

last day.

TIMER PROGRAM x OFF

Notes

For example, if Timer program 1 and Timer

program 2 are both set to an ON TIME of

7:00AM, Timer program 1 has priority and Timer

program 2 is ignored.

• Timer program can activate regardless of power

on or standby mode.

• If timer program is already available, to select

“TIMER PROGRAM x CONFIRM” to scroll the

timer setting contents.

• When timer program is finished, the unit goes to

standby mode.

Timer program 1: 7:00AM

(This timer has priority)

1:00PM

• If timer program is already available, to select

“TIMER PROGRAM x ON” to activate the

timer.

• When timer program is activated, standby

indicator lights green.

Timer program 2: 7:00AM - 0:30PM

Then press the Easy JOG 4/¢ knob

! or ENTER button b.

If the setting of the two timer program overlaps,

the earlier timer has priority.

• You can cancel the Timer program setting

procedure at any time by pressing the TIMER

button x.

• To select “TIMER PROGRAM x OFF” to turn

off the timer program.

Timer program 1: 9:00AM - 10:00AM

5. Press the Easy JOG 4/¢ knob ! or

ENTER button b to select “TIMER PROGRAM

x SET”.

Timer program 2: 8:00AM

(This Timer program has priority)

10:00AM

Download from Www.Somanuals.com. All Manuals Search And Download.

LAST FUNCTION MEMORY

OTHER OPERATION

CD RECEIVER CR601

• This unit is equipped with a last function memory

which stores the input and output setting

conditions as they were immediately before the

power is switched off.

This function eliminates the need to perform

complicated resettings when the power is turned

on.

Confirm and change timer

program

• You can check and change the timer program

setting as follows.

Sleep timer

INPUT

DIRECT

BASS

TREBLE

• The sleep timer function allows the unit to be in

standby mode automatically after specific period

of time.

PUSH TO ENTER

VOLUME

1. Press the SLEEP button ⁄ on the remote

STANDBY

• The unit is also equipped with a back-up

memory.

This function provides approximately one week

of memory storage when the main unit’s power

switch is off and with the mains cord

disconnected.

1. Press the TIMER button x.

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select timer

program number.

POWER ON

STANDBY

PHONES

control.

3. You can change the displayed contents with the

Easy JOG 4/¢ knob ! or 5 or ∞ button

c and ENTER buttons b if necessary.

2. Each press of the button will increase the time

CLOCK

CALL

before shut down in the following sequence.

Note

INITIALIZATION OF THE

MICROPROCESSOR

OFF 10

90 120

TIMER

• Timer program is not changed if you quit

confirming halfway through a procedure.

3. The sleep timer will be shown for 5 seconds in

the display, and it will count down until the time

has elapsed. When the programed sleep timer

has elapsed, the unit will automatically turn off.

• When the indication of the display is not normal

or when the operation of the unit does not shows

the reasonable result, the initialization of the

microprocessor is required by the following

procedure.

--/---

Timer program off

CLEAR

ENTER

10/0

1. Press the TIMER button x, “TIMER

DISPLAY

PROGRAM 1” is displayed.

VOL

Note that the display will be dimmed when the

sleep timer is programed.

2. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select timer

program number.

INPUT

MUTE

VOL

1. Unplug the mains cord from the power outlet

MODE

REPEAT

4. Press the SLEEP button ⁄. The display shows

after pressing the POWER ON/STANDBY

the remaining time until standby mode begins.

switch q or

button z and setting the

3. Press the Easy JOG 4/¢ knob ! or

ENTER button b, “TIMER PROGRAM x SET”

is displayed.

standby mode.

5. To cancel the sleep timer, press the SLEEP

button ⁄ repeatedly until the display shows

“SLEEP OFF”.

TUNING

PRESET

2. Holding both the MENU button u and POWER

ON/STANDBY switch q, plug the mains cord

into the power outlet.

DIMM

DAB

4. Either turn the Easy JOG 4/¢ knob ! or

press the 5 or ∞ button c to select “TIMER

PROGRAM x OFF”.

• When the sleep timer is programed, DIMMER

function does not activate.

AUTO TUNE

MEMO

SLEEP

SHIFT

DIRECT

3. Check that the entire display is flashing with an

interval of about 1 second, and release your

fingers from the

buttons and the

microprocessor will be initialized.

⁄

REMOTE CONTROLLER

RC601CR

Notes

• If step 3 does not work,start over from step 1.

5. Press the Easy JOG 4/¢ knob ! or

• If the microprocessor has been initialized all the

button settings are reset to the default values

(the values set upon shipment from the factory).

ENTER button b to turn off the timer program.

Note

• To turn a timer program back on again, repeat

this procedure and select “TIMER PROGRAM x

ON”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptom

Cause

Measures

Page

TROUBLESHOOTING

If a problem should arise, first check the following.

• A strong light source is

interfering with the CR601’s

remote sensor.

•

Make sure that the CR601 is

not subjected to direct sunshine

or inverter-type ﬂuorescent

lights. Relocate if necessary.

1. Are the connections correct?

2. Have you operated the receiver according to the operating instructions?

3. Are the speakers and other components operating properly?

Hissing noise is heard

on FM broadcasts.

• Antenna cable is not properly

connected.

• Antenna is not pointing in the

right direction.

• Connect the leads properly.

• Point the antenna in the right

direction.

If this unit is not operating properly, check the items listed in the table below. Should the problem persist,

there may be a malfunction. Disconnect the power immediately and contact your store of purchase.

• Install an outdoor antenna.

• Radio waves are weak.

Symptom

Cause

Measures

Page

Hissing or buzzing

sound is heard on AM

broadcasts.

• Noise from a TV or

interference in the signals sent • Change the position of the

from the broadcast station.

• Turn off the TV.

Power does not turn on • Mains cord’s plug is not

• Plug the mains cord in

properly.

when POWER

ON/STANDBY switch is

pressed.

plugged into wall outlet.

loop antenna.

• Install an outdoor antenna.

Booming sound

(humming) is heard in

AM broadcasts.

• Signals transmitted over the

main cord are modulated by

the power source frequency.

• Insert the plug in the opposite

direction.

• Install an outdoor antenna.

There’s no sound

coming from the

speakers?

• The speaker cables are not

connected properly.

• Check the speaker

connections and make sure

that none of the wires are

touching each other, other

connectors, or any metal parts.

Display says “Station

not Available”.

• Ensure that DAB coverage

exists in your area.

• Check that antenna is

connected.

• The volume is set at minimum. • Turn up the volume.

• The CR601 is muted.

• Unmute the CR601.

I can not access

secondary services.

• At the time of publishing this

manual not many secondary

services are available, this will

increase as more DAB stations

start broadcasting.

•

If a secondary service station is

available, “ >” will be displayed

in the “Ensemble No. & Freq.”

• A pair of headphones is

connected.

• The wrong input source is

selected.

• A connecting cable may be

damaged.

• Turn down the volume, then

disconnect the headphones .

• Check the input source setting.

• Check your connecting cables

for signs of damage and

replace as necessary.

I hear a burbling sound • DAB like other digital media is • Use the CR601’s “Tuning aid”

on some stations.

good at producing quality

audio from a low level signal,

however if this signal, level is

too low a “burbling” sound can

sometimes be heard.

while repositioning your

antenna to get the maximum

signal strength and reduce this

noise.

Sound is coming from

only one speaker?

• The other speaker’s cable is

not connected properly.

• Check the speaker

connections and make sure

that none of the wires are

touching each other, other

connectors, or any metal parts.

Reception is noisy,

intermittent, and the

indicator

• You’re too far away from the

transmitter. Or, your FM

antenna is in the wrong

position or pointing in the

wrong direction. Or, the

station’s signal strength is

poor.

• Switch the FM Mode to Mono.

• Adjust the position, height, and

direction of your FM antenna.

• Install an outdoor FM antenna,

preferably one with many

elements. Installing an out-

door antenna is a specialist’s

job, so contact your nearest

dealer for advice.

Nothing happens when • Are the batteries dead?

remote control buttons

• Replace the batteries with new

ones.

• Operate from closer to the

main unit.

ﬂickers?

are pressed.

• Is the remote control unit too

far away?

• Is there an obstacle between

the remote control unit and the

main unit?

• Remove the obstacle.

• You have pressed the wrong

button.

• Batteries are not set in their

proper direction (ª and ·).

• Press the desired button.

The radio presets no

longer work?

• The power cord has not been

connected to a wall outlet, or

the power has been turned off

for an extended period.

•

Preset your favourite radio

stations again. The power cord

must be plugged into a wall

outlet a few times each month

in order to preserve the presets.

• Set the batteries in the proper

direction.

Download from Www.Somanuals.com. All Manuals Search And Download.

Abnormal Behavior:

Symptom

Cause

Measures

Page

The CR601 contains a microcomputer for signal processing and control functions. In very rare situations,

severe interference, noise from an external source, or static electricity may cause it to lockup. In the

unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least five

seconds, and then plug it back in again.

The RDS (Radio Data

System) doesn’t seem

to work?

• The current FM station does

not support RDS.

• The signal strength is poor, or • Install an outdoor FM antenna,

• Tune into a station that

supports RDS.

there’s too much interference.

change the position or

direction of your outdoor FM

antenna, and keep it away

from ﬂuorescent lights.

CD playback skips?

• The CR601 is subject to

vibration.

• Install the CR601 somewhere

free of vibration.

• The disc is dirty.

• The disc is very scratched.

• Remove the disc and clean it.

• Buy a new disc.

Noise is generated.

• DTS CD is being replayed.

• Do not replay DTS CD, which

is not supported by the CR601.

Can’t play a CD?

• The disc is upside down.

• Load the disc with the label-

side facing up.

• The disc is dirty.

• Condensation has formed

inside the CR601.

• Remove the disc and clean it.

• Remove the disc and leave the

CR601 turned on for several

hours until the condensation

has evaporated.

• The CD-R/RW disc is

nonstandard.

• See “Disc Notes”.

It takes a long time to

read CD/MP3.

• It may take a longer time to

read CD/MP3 with many track

numbers.

• This is not a malfunction.

It takes a long time to

locate certain tracks.

• The disc is dirty.

• The disc is very scratched.

• Remove the disc and clean it.

• Buy a new disc.

The clock is wrong?

• CT (Clock Time) information

has been taken from a radio

station in another time zone.

• Set the clock by Manual

operation.

No sound is output

when a timed playback

or recording task starts? CR601 is muted.

• While a timed recording task is

in progress, the output of the

•

To hear what’s being recorded,

press the MUTE button to

cancel the Mute function. Press

it again to mute the CR601.

• Set the volume to a suitable

• For timed playback, the

volume is determined by the

VOLUME control.

level.

Standby indicator

ﬂashes.

• The protection circuit may be

activated.

• Make sure not to short-circuit

the positive and negative

speaker wires.

Download from Www.Somanuals.com. All Manuals Search And Download.

Band III (174 to 240 MHz)

L-Band (1452 to 1490 MHz)

SPECIFICATIONS & DIMENSIONAL DRAWINGS

Frequency Level Frequency Level

174.928 MHz

176.640 MHz

178.352 MHz

180.064 MHz

181.936 MHz

183.648 MHz

185.360 MHz

187.072 MHz

188.928 MHz

190.640 MHz

192.352 MHz

194.064 MHz

195.936 MHz

197.648 MHz

199.360 MHz

201.072 MHz

202.928 MHz

204.640 MHz

206.352 MHz

208.064 MHz

209.936 MHz

211.648 MHz

213.360 MHz

215.072 MHz

216.928 MHz

218.640 MHz

220.352 MHz

222.064 MHz

223.936 MHz

225.648 MHz

227.360 MHz

229.072 MHz

230.784 MHz

232.496 MHz

234.208 MHz

235.776 MHz

237.488 MHz

239.200 MHz

1452.960 MHz

1454.672 MHz

1456.384 MHz

1458.096 MHz

1459.808 MHz

1461.520 MHz

1463.232 MHz

1464.944 MHz

1466.656 MHz

1468.368 MHz

1470.080 MHz

1471.792 MHz

1473.504 MHz

1475.216 MHz

1476.928 MHz

1478.640 MHz

1480.352 MHz

1482.064 MHz

1483.776 MHz

1485.488 MHz

1487.200 MHz

1488.912 MHz

1490.624 MHz

AMP

Frequency Response ........20 Hz–20 kHz ( 1 dB)

Audio Dynamic Range.................................93 dB

THD (Total Harmonic Distortion) ................0.01%

Wow and Flutter

................Below threshold of measurability

Audio Output/Impedance (Analog)

........................................1.3 V (rms) /1 kΩ

S/N Ratio .....................................................93 dB

10A

10B

10C

10D

11A

11B

11C

11D

12A

12B

12C

12D

13A

13B

13C

13D

13E

13F

Power Output ........30 W + 30 W (6 Ω THD=10%)

THD (Total Harmonic Distortion)

............................0.22% (15 W output 6 Ω)

Input Sensitivity and Impedance...............200 mV

Frequency Response

.......................20 Hz-90 kHz/( –3 dB /Line)

Tone Control....... +8 dB, –8 dB, 100 Hz – 10 kHz

Speaker Impedance................................... 6–8 Ω

Tuning Frequency Range

........................87.5–108 MHz 50 kHz step

Usable Sensitivity .......................2.2 µV (75ΩIHF)

S/N Ratio.............................Stereo 68 dB (IHF-A)

....................................Mono 69 dB (IHF-A)

THD (Total Harmonic Distortion)

General

Power Supply..............................AC 230V, 50 Hz

Power Consumption .....................................74 W

Stand-by Power Consumption.....................0.8 W

Dimensions (W x H x D)

........................210 W x 146 H x 336 D mm

Weight.........................................................5.7 kg

...................................Stereo 0.3% (1 kHz)

.....................................Mono 0.2% (1 kHz)

Frequency Response

* Specifications subject to change without prior

notice.

.................30 Hz–15 kHz/+1.5 dB, –1.5 dB

Stereo Separation.......................... 40 dB (1 kHz)

OTHERS

Tuning Frequency Range

........................... 522–1611 kHz 9kHz step

Usable Sensitivity ..................................... 320 µV

S/N Ratio .................................................... 45 dB

THD (Total Harmonic Distortion) ................1.00%

The section describes the care and maintenance tasks that must be performed to optimize the operation of

your Marantz equipment.

336

312

Cleaning of equipment external surfaces

The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads,

steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine,

insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use

cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft,

lint-free cloth.

DAB

Tuning Frequency Range

................174.928–239.200 MHz (BAND3)

............1452.96–1490.624 MHz (L–BAND)

Frequency Response ........ 42 Hz-16 kHz 0.5dB

THD (Total Harmonic Distortion) ................0.06%

If the equipment becomes heavily soiled:

• dilute some washing up liquid in water, in a ratio of one part detergent to six

parts water.

210

• dip a soft, lint-free cloth in the solution and wring the cloth till it is damp.

• wipe the equipment with the damp cloth.

CD RECEIVER CR601

• dry the equipment by wiping it with a dry cloth.

INPUT

DIRECT

BASS

TREBLE

PUSH TO ENTER

VOLUME

STANDBY

POWER ON / STANDBY

Repairs

PHONES

Only the most competent and qualified service technicians should be allowed to service the factory-

trained warranty station personnel have the knowledge and special facilities needed for repair and

calibration of this precision equipment. After the warranty period has expired, repairs will be performed for

a charge if the equipment can be returned to normal operation.

In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on

the Marantz Authorized Service Station list. If writing, please include the model and serial number of the

equipment together with a full description of what you think is abnormal about the equipment's behaviour.

(mm)

Download from Www.Somanuals.com. All Manuals Search And Download.

www.marantz.com

You can find your nearest authorized distributor or dealer on our website.

U.S.A.

Marantz America, Inc.

Marantz Europe B.V.

1100 Maplewood Drive, Itasca, IL 60143, U.S.A.

EUROPE

P.O. Box 8744, 5605 LS Eindhoven, The Netherlands

is a registered trademark.

Printed in China

10/2005 00M01CW851310 mzh-d

Download from Www.Somanuals.com. All Manuals Search And Download.

LG Electronics Car Satellite TV System 42LP870H User Manual
LG Electronics Washer WM2688HNMA User Manual
Lightolier Indoor Furnishings 1001FDL User Manual
Lightolier Work Light 83T4S User Manual
LST Smoke Alarm M400RFE AS User Manual
Manitowoc Ice Cooktop GI SH BA 3500FH User Manual
Maytag Washer FRONT LOADINGAUTOMATICWASHER User Manual
MB QUART Stereo Amplifier PAB 2100c User Manual
Melissa Microwave Oven 653 114 User Manual
Midway Video Game Console 4 Player 25 Dedicated Video Game User Manual