Manitowoc Ice Ice Maker K000187 User Manual

K00018 STACKING KIT  
Installation Instructions  
1. The K000187 stacking kit is used for stacking an E-0600  
4.  
INSTALLATION OF ICE CHUTE:  
A. Attach bottom-mounting bracket from kit to front  
base channel of E-1100 ice machine (see Illustration  
2A).  
B. Remove angle “A” from E-0600 ice machine (see  
Illustration 2A).  
(or G-0800) on an E-1100 (or G-1700) ice machine. The  
bin must be leveled before proceeding.  
2. INSTALLATION OF E-1100 ICE MACHINE:  
A. See service manual for uncrating and inspection of  
ice machine.  
B. Remove top cover from and side panels from ice  
machine.  
C. Attach top mounting bracket from kit to top rail of E-  
1100 ice machine using existing screw.  
D. Reattach angle “A”.  
E. Remove the water curtain limit guard from the E-  
1100 ice machine.  
F. From the top ice machine, carefully bring the ice  
chute down in place until the weld studs go into the  
holes in the mounting brackets. Secure with wing  
nuts provided in kit.  
G. Use RTV from kit to seal all seams between the top  
cover and E-0600 ice machine (see Illustration 2A).  
H. Check for free movement of water curtains.  
I. Reattach all panels.  
C. Set ice machine carefully and squarely on bin.  
D. Position top cover from kit on right-hand side of ice  
machine. Attach the water shield to the top cover  
with #8 x 1/2 SMS from kit (see Illustration 1).  
E. Add foam tape from kit, as shown in Illustration 1.  
3. INSTALLATION OF E-0600 ICE MACHINE:  
A. See service manual for uncrating and inspection of  
ice machine.  
B. Remove top cover and side panels from ice machine.  
C. Set E-0600 ice machine on E-1100 ice machine with  
back and left-hand sides flush.  
D. Use 1/4” diameter holes in bottom rails of E-0600 as  
a template to drill two 1/4” holes, one in the left-  
hand top rail of the E-1100 and one in top cover  
from kit. Be careful not to damage internal  
components of E-1100 ice machine (see Illustrations  
2A and 2B).  
J. Proceed to ice machine service manuals for electrical  
and water hook-ups and start-up procedure.  
E. Bolt ice machines together with 1/4-20 x 5/8” long  
bolt, washers, and nuts, provided in kit.  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8001833  
Rev. 05/11/03  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenovo Computer Monitor 2572MB1 User Manual
Lexicon Video Game Controller MC 1 User Manual
LG Electronics Clothes Dryer DLE7177 User Manual
LG Electronics Microwave Oven LMVM1945SB User Manual
Life Fitness Flat Panel Television SC85 User Manual
Life Fitness Home Gym AK53 00053 0000 User Manual
Linksys Network Card WPC54GX User Manual
Makita Chainsaw DCS 9010 User Manual
Makita Impact Driver 6953 User Manual
M Audio Stereo Amplifier Dual Mic Preamp User Manual