CꢀNTENTS
GENERAL SAFETY REQUIREMENTS
CONNECTORS AND DEFINITION
FRONT PANEL CONTROLS
REMOTE CONTROL FUNCTIONS
INSTALLATION
SELECTING OUTPUT SIGNAL TO TV
SETTING THE TIME
ANTENNA CONFIGURATION
SEARCHING CHANNELS
CONFIGURING DiSEqC POSITIONER
AUTOMATIC SEARCH
USING BLIND SEARCH FEATURE
USING EVENT TIMER
TO CHANGE CHANNEL OR SATELLITE
SELECTING RADIO CHANNELS
VIEWING SCRAMBLED CHANNELS
2
3
3
4
4
5
5
6
7
7
8
8
9
9
10
10
ELECTRONIC PROGRAM GUIDE
TO DISPLAY SUBTITLES
TO SELECT AUDIO LANGUAGE
TO DISPLAY TELE-TEXT
CREATING FAVORITE CHANNELS
EDITING CHANNELS
EDITING SATELLITE AND TP
EDITING CHANNEL PIDS
11
11
11
11
11
12
12
13
13
14
14
14
14
15
15
15
TO SET PARENTAL LOCK
TO RESET YOUR STB
TO UPGRADE SOFTWARE
STB TO STB COPY FUNCTION
TO UPGRADE SOFTWARE VIA PC
EDITING TP IN CHANNEL SEARCH
TROUBLE SHOOTING GUIDE
GENERAL SPECIFICATIONS
INTRꢀDUCTIꢀN
Welcome to the world of Maꢂhattaꢂ digital satellite receivers. Please read this manual
and the following general safety requirements carefully before installing your STB.
The Plaza XT is a high performance digital satellite receiver, supporting many different
requirements of broadcast standards worldwide. This STB includes the best possible
features as well as Bliꢂd Search together with the most up-to-date electronics hardware
and easy to use on-screen menu.
GENERAL SAFETY REQUIREMENTS
1. WARNING: Do not install this equipment in a confined space such as a bookcase
or similar unit. Covering the ventilation openings with items such as newspapers,
tablecloths, curtains etc should not impede the ventilation.
2. WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as vases, are placed on
apparatus.
Digital Satellite Receiver
ꢀꢁꢂer’ꢃ Maꢂual
3. WARNING: The mains plug is used as disconnect device, the disconnect device
shall remain readily operable.
4. Correct diꢃpoꢃal of thiꢃ product: This marking indicates that this product
should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
Free To Air / Common Interface / Go To X / USALS
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀSD Settiꢂg – Meꢂu Color
Coꢂfiguratioꢂ
Time Settiꢂg
Coꢂfiguratioꢂ
Meꢂu Itemꢃ: Select an item to change its color.
Red, Greeꢂ, Blue: Enter with 0-9 keys or press left
/ right to change color value
Default: If you wish to return to default settings,
press OK
Summer, Spriꢂg, Autumꢂ, Wiꢂter: You can select
other default themes with colored keys.
Time Mode: Select Manual to set the time manually.
Auto mode is only possible after channels are tuned.
Regioꢂ/City: For Auto mode, select your location. If
your location is not listed, select User Defined.
GMT ꢀffꢃet: For Auto mode it is already calculated
for the listed locations. For User Defined, enter with
0~9 and PAGE Up/Down keys
Time, Date: For Manual mode, enter with 0~9 keys
Ideꢂtificatioꢂ of Meꢂu itemꢃ
Summer Time: On will advance the time by 1Hour.
Sleep Timer: Press left/right keys to switch on and select timer duration. The STB will
switch to standby after the set time has lapsed.
ANTENNA CꢀNFIGURATIꢀN
Press MENU key and go to INSTALL. Select Antenna setting.
Coꢂfiguriꢂg the LNB
Aꢂteꢂꢂa Settiꢂg
Coꢂfiguratioꢂ
LNB No: LNB 1-16 are factory set to Universal. To
allocate satellite to LNB, press OK and select the
satellites.
LNB Type: Select LNB and press OK to configure
LO (Local Oscillator) settings on the right. LO
figures are preset for each type. To change, enter
with 0~9 keys.
LNB Poꢁer: Select power output to the LNB. V/H
represents both 14V and 18V.
SELECTING ꢀUTPUT SIGNAL Tꢀ TV
Press MENU key and select TV Setting.
TV Settiꢂg
Coꢂfiguratioꢂ
Staꢂdard: If TV is connected via UHF lead, select
relevant standard. Example; for UK select PAL I
Aꢃpect Ratio: Select picture format for your TV.
Video ꢀutput: Select RGB if your TV supports this
via SCART input otherwise select Comp.
22KHz Toꢂe: If using other than Universal type, you can select the tone control.
DiSEqC T…(Type): Select an option when using more than one LNB for fixed installation
with a DiSEqC switch.
UHF Chaꢂꢂel: If you have interference on UHF
output, select a different channel and re-tune your
TV (OPTIONAL)
DiSEqC Iꢂ…(Iꢂput): Configure the input ports for the switch. See following examples.
To coꢂfigure four LNB
To coꢂfigure MꢀNꢀBLꢀCK LNB
Astra 1(19.2E) set LNB No 1 to
DiSEqC Mini-A
Astra 2 (28.2E) set LNB No 1 to DiSEqC 1
Astra 1 (19.2E) set LNB No 2 to DiSEqC 2
Hotbird 1-6 (13E) set LNB No 3 to DiSEqC 3
Thor 2, 3 (1W) set LNB No 4 to DiSEqC 4
Video Level: Press OK to adjust Brightness and Contrast levels of the picture. Use up /
down keys to navigate and left / right keys to adjust the level.
Hotbird 1-6(13E) set LNB No 2 to
DiSEqC Mini-B
SETTING THE TIME
Press MENU key and select Time Setting.
To coꢂfigure Wide Baꢂd LNB
Note: Adjustments for the polarity employing a mechanical or magnetic polarizer are
achieved by external means.
Note: Time in Auto mode is derived from the satellite signal and it may vary from
satellite to satellite. Auto settings can only be done after the channels are tuned.
Set LNB No 1 to 14V (for Low Band vertical polarity)
Set LNB No 2 to 14V (for Low Band horizontal polarity)
Set LNB No 3 to 18V (for High Band vertical polarity)
Set LNB No 4 to 18V (for High Band horizontal polarity)
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioner --- USALS
Configuration
SEARCHING CHANNELS
Press MENU key and go to INSTALL. Select Channel Search.
Longitude, Latitude: Enter your location with 0-9
and PAGE up / down keys. Example; London –
Longitude = 0 and Latitude = 51.5N
USALS: Press OK to go to position automatically.
Go To 0: Press OK to go to 0 position on the motor
Channel Search
Configuration
Sat Search: Select Single if searching manually.
Select Multiple if searching all automatically.
Satellite: Press OK, select a satellite then press
right and select a scan mode. Configure all
satellites in the same way for multiple search.
TP Data: Select a TP that has presence of signal.
Positioner: If motor is used, select DiSEqC 1.2 for
manual positioning or USALS if motor supports it.
See configuring the DiSEqC positioner.
AUTOMATIC SEARCH WITH DiSEqC POSITIONER
1. Press MENU, go to INSTALL and press OK.
2. Go to Antenna Setting and press OK. Press OK on LNB No. Focus will move to
satellite list.
Start Search: Press blue key to start search.
3. Press OK on the satellites you wish to tune.
4. Press EXIT twice. When prompt to save message comes, press OK on Yes. After
storing menu will close.
5. Go to Channel Search and press OK. On Sat Search select Single if only one
satellite is to be searched. Select Multiple to search all at once.
6. In the same menu go to Satellite and press OK.
7. Then press OK on a satellite to select it, then, press right to go to Scan Mode.
Select the option you require and press OK. Press EXIT focus will move back to
satellite. Repeat the same for all satellites. After configuration press EXIT and
the menu should close.
Channel options in Scan mode
All TP / All Ch --- All transponders and channels
All TP / Data Ch --- All transponders Data channels.
All TP / FTA Ch --- All transponders free to air channels.
NIT / All Ch --- All channels in Network identified table.
NIT / FTA Ch --- Free to air channels in Network identified table.
Select TP / All Ch --- All channels in Selected TP. Press OK to select from list.
Select TP / FTA Ch --- Free to air channels in Selected TP. Press OK to select from list.
Manual TP / All Ch --- Press OK for Single TP search and select the TP.
8. Go to Positioner and select USALS. Press OK menu will open. On Longitude
and Latitude enter your location. Press EXIT and save the settings. After storing
menu will close.
CONFIGURING DiSEqC POSITIONER
Positioning the dish manually. Select DiSEqC 1.2 and press OK.
9. Press blue key to start search. After moving dish, search will start. If searching
more than one satellite, after first one is finished it will move to the next satellite
and start search automatically.
Positioner --- DiSEqC 1.2
Configuration
1. Hotbird1-6: Shows pre stored satellites. A
number with ---- is a vacant position for other
satellites not in this list.
Move: Press and release left or right key to move
few steps at a time or keep it pressed to move
continuously. Move the dish until you find maximum
signal and quality.
USING BLIND SEARCH FEATURE
This feature is used for automatic searching of transponders. Searching with this feature
is slower than normal search. Press MENU key and go to INSTALL. Select Blind Search.
Blind Search
Configuration
Nudge: Same as above, but with finer movements.
Satellite: Press OK and select a satellite.
Search Type: Select an option.
Scan Freq: Select an option. All scans from 10700
to 12750 (whole band). User Defined scans a
desired range of frequency.
Symbol Rate: Select symbol rate range.
Start Freq, End Freq: When using User Defined,
enter with 0~9 keys.
East, West Limits: First erase the limits by pressing OK on ‘Erase Limits’ then determine
the furthest limits your motor can move and enter these here.
Erase Limits: Press OK To clear the limits.
Go To 0: Press OK to go to 0 position on the motor
Re-sync: Using move function, first find position of one satellite by obtaining maximum
signal and quality. Then select Re-sync and press OK. All other satellites that are listed in
this menu can now also be found automatically during channel search.
Polarity: Select an option.
Positioner: Select positioner if required. See CONFIGURING THE DiSEqC POSITIONER
Start Search: Press blue key to start. It searches transponders first then main channel
search will start. See following.
NOTE: Signal & Quality bars in Channel Search
Red indicates noise only with no actual signal. Green indicates signal is present.
Positioning the dish automatically. Select USALS and press OK. You can search up to
40 satellites at a time automatically using this menu.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chaꢂꢂel Search
Bliꢂd Search – Traꢂꢃpoꢂderꢃ
Chaꢂꢂel Broꢁꢃer
ꢀperatioꢂ
To chaꢂge chaꢂꢂel: Use PAGE and CH up / down
keys. Press OK on the required channel. Press OK
again or press EXIT.
To chaꢂge ꢃatellite: Use SAT key and select
satellite. Alternatively use left / right keys to select
satellite. Press OK on the required channel.
All Satelliteꢃ liꢃt: To display collective list of
channels for all satellites. Use left / right and select
All Satellites.
A-Z: Press green key to sort channels alphabetically. Select alphabet on the left and press
OK. Press OK on the required channel.
USING EVENT TIMER
F/S: Press yellow key to sort channels by free to air first followed by scrambled. Press OK
on the required channel.
Eꢂcryptioꢂ/Netꢁork/TP:
IMPꢀRTANT: The Eveꢂt Timer ꢁill oꢂly ꢁork ꢁheꢂ the time iꢃ ꢃet to maꢂual
mode. Iꢂ Time Settiꢂg meꢂu ꢃelect Maꢂual aꢂd ꢃet the time. Alꢃo the eveꢂt timer
ꢁill ꢂot turꢂ oꢂ if the STB lock iꢃ ꢃet to ‘ꢀꢂ’ iꢂ the Pareꢂtal Lock meꢂu.
Press blue key once to sort channels by encryption. Select from list and press OK
on the required channel.
Press blue key twice to sort channels by network. Select from list and press OK
on the required channel.
Press blue key three times to sort channels by TP. Select from list and press OK
on the required channel.
You can program up to 20 events for recording via the VCR SCART output. The STB turns
on and off automatically at the set times for the events. Press MENU key and select Event
Timer.
Eveꢂt Timer
Coꢂfiguratioꢂ
Normal: Press red key to return to normal list.
Eveꢂt No: Select Event number.
Timer Mode: Select option.
USING PꢀS KEY ꢀN REMꢀTE CꢀNTRꢀL WITH DiSEqC 1.2
This key is used when after Channel Search you wish to re optimize the dish position.
Press POS key, the menu will open for adjusting the position.
Move / Nudge: Press left or right key.
Re-ꢃyꢂc: This function is same as in CONFIGURING THE DiSEqC POSITIONER described
earlier.
Once, to turn ‘on’ one time only.
Daily, to turn ‘on’ daily at the same time.
Weekly, to turn ‘on’ weekly at the same
time.
Satellite: Select satellite.
TV/Radio: Select TV or Radio channel mode.
SELECTING RADIꢀ CHANNELS
Press TV / RAD key once to change to Radio Mode. Press it again to change back to TV
Mode. Follow above steps for changing the channel.
Chaꢂꢂel: Press OK and select the channel you require.
Date: Enter date with 0~9 keys, of the event to turn ‘on’.
VIEWING SCRAMBLED CHANNELS
For modelꢃ ꢁith Commoꢂ Iꢂterface aꢂd Card Slotꢃ
Open flap (F10) and insert CAM in the slot together with a card as shown below.
ꢀꢂ Time, ꢀff Time: Enter with 0~9 keys ‘On’ and ‘Off’ times for the event. Configure
other events the same way, ensuring that the ‘On’ and ‘Off’ times do not overlap previous
event time on the same date. The STB will turn ‘on’ (from standby) and select the set
channel automatically. If positioner is used, the dish will move to that satellite.
Iꢂꢃertiꢂg card aꢂd CAM
Iꢂꢃertiꢂg Cardꢃ
NꢀTE: If positioner is used, please set event ‘On’ time to 3 minutes ahead of the
program. After an event has turned ‘On’, if any of the remote key or the front panel key
is pressed, it will override the ‘Off’ time.
Insert the cards with contacts
facing up.
ꢀPERATIꢀNAL
Checkiꢂg CAM aꢂd card parameterꢃ
Tꢀ CHANGE CHANNEL ꢀR SATELLITE
Press OK to display the channel browser (channel list). Select following options.
Press MENU and go to CA SETUP. Select the required slot and follow the on screen
instructions for checking any parameters.
CI: Shows the CAM parameters.
CAS 1, CAS 2: Shows the card parameters.
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRONIC PROGRAM GUIDE (EPG)
Favorite Ch
Configuration
To display correct EPG it is important to set the time first. Press red key, the following
menu will open.
Add: Press green key on the required channel.
Favorite icon will appear against the name.
Delete: Press red key on the channel to be
deleted. Favorite icon will be removed.
Rename: Press yellow key to display keyboard.
Select and press OK on the letters to rename.
Press EXIT after naming.
TV EPG Guide
Operation
Channel List: Select channel and press OK. Focus
will move to right.
Highlighted Events: Select event and press OK
for details. Use PAGE up / down for next page.
Note: If EPG is not transmitted, it displays ‘ NO
EVENT’. After changing channel, please allow few
seconds before you press EPG key.
Change Group: Press blue key.
To change satellite: Press SAT key.
Viewing favorite channels
Press FAV key and select the channel. Press left / right key to change favorite list. To
return to normal channel list, press SAT key, select the satellite and channel from its list
and press OK.
To display subtitles
Press SUB.T (blue) key. Select required language and press OK. The subtitles will appear
after a few seconds. If not transmitted, it will state ‘No Subtitle Language’. Press EXIT to
cancel subtitles.
EDITING CHANNELS
Press MENU key and go to EDIT. Select Channel Edit.
Channel Edit
Configuration
To select audio language
Press LANG key. Select required language and press OK. Press AUDIO key (repeatedly) to
select Left, Right, Mono or Stereo.
Lock: Press green key on the channel. Lock icon
appears against the name. To unlock, press green
key again. See Parental Lock section to activate
lock.
To display Tele-Text
Press T. TEXT (green) key. Use 0-9 keys to call a page. To change pages sequentially, use
PAGE up / down keys. Press EXIT to cancel Tele-Text.
Delete: Single Ch --- Scroll to required channel
and press OK then press red key. Multi Ch ---
Scroll to first channel in the batch and press OK
once. Scroll down to the last channel in batch, it
will highlight these. Press OK on last channel then
press red key.
To use Zoom function
Press ZOOM key a rectangular window will appear on the screen. Press left / right to
move this window to desired position. Press page up / down to select the level of zoom.
Finally press OK. Press EXIT to cancel zoom.
Move: Single Ch --- Scroll to required channel and press OK twice. Scroll to required
position or key in the position with 0~9 keys then press blue key. Multi Ch --- Scroll to
first channel in the batch and press OK once. Scroll down to the last channel in batch, it
will highlight these. Press OK on last channel. Then scroll or key in required position and
press blue key.
Rename: Press yellow key to display keyboard. Select and press OK on the letters to
rename.
To use Freeze function
Press FREEZE key. Press it again to cancel freeze.
To use Mosaic function
Press MOSAIC key, the screen will change to 9 screens and it will tune these to display
still pictures for the first 8 and live picture on the 9th screen. At this point you can use
page up / down to display the next 9 screens. Alternatively press left / right to highlight a
screen then press OK to select the channel you require.
To change satellite list: Press SAT key followed by up or down key, the antenna will
move to the selected satellite.
EDITING SATELLITE AND TP
Press MENU key and go to EDIT. Select Sat/TP Edit. When, in Sat/TP Edit menu, press left
/ right to select satellite or TP.
EDIT FUNCTIONS
CREATING FAVORITE CHANNELS
There are 11 TV and Radio lists you can create and rename the list headings to your
preference. Press MENU key and go to EDIT. Select Favorite Ch.
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Sat/TP Edit --- Satellite
Configuration
Note: After ‘Lock’ is turned ‘On’, channels locked in edit menu will require a password to
open. If STB lock is on, a password is required to operate any function. After applying
new password, the default password is no longer operative. If you loose or forget your
password, apply the master password given on page 16.
Add: Press green key to display keyboard. Select
and press OK on letters to name the satellite and
press EXIT. Name is added at end of satellite list.
Enter position with 0~9, PAGE up / down keys.
Delete: Scroll to required satellite and press red
key.
TO RESET YOUR STB
Press MENU, select Master Reset and enter your password. Default password is ‘0000’.
Sort: Press blue key to sort the list by position.
Rename: Press yellow key to display keyboard.
Select and press OK on the letters to rename.
Master Reset
Configuration
Factory Reset: Press OK to erase all settings.
Erase Radio Channels: Press OK to erase radio
channels only.
Sat/TP Edit --- TP
Configuration
Erase Scrambled Channels: Press OK to erase
scrambled channels only.
Erase All Channels: Press OK to erase all
channels but keep other user settings.
Add: Press green key to display keyboard. Name
the TP and press EXIT. Name is added at end of TP
list and focus moves to TP Data. Enter data and
press EXIT.
Delete: Scroll to required TP and press red key.
Sort: Press blue key to sort the list by frequency.
Rename: Press yellow key to display keyboard.
Select and press OK on the letters to rename.
TO UPGRADE SOFTWARE OR TRANSFER DATA
Press MENU, go to INSTALL, select Data Download and enter your password. Default
password is ‘0000’.
Edit: Scroll to required TP and press white key. Focus will move to TP Data for editing.
Data Download
Configuration
EDITING CHANNEL PIDS
Press MENU key and go to EDIT. Select PID Edit
PID Edit
STB To PC Download: Press OK to transfer user
settings to PC for using with PC Edit software.
STB To STB Download: Press OK to transfer user
settings to another STB of same model.
System Information: Press OK to display
software version. Press EXIT to close.
OTA Upgrade: To upgrade software via satellite.
Press OK to open upgrade menu. Menu is pre-
configured therefore press blue key to start.
Configuration
Scroll to required channel and press OK. Focus will
move to PID Data. Enter new PID with 0~9 keys.
After configuration press EXIT and save the
settings.
Note: To upgrade software via satellite, your dish must be positioned to HotBird 1-6
(13.0E). This satellite provides the OTA Upgrade. The STB will check for any available
upgrade and start download. If the software in STB is same as in OTA Upgrade, it will
display ’Latest Software Already Installed’. After upgrading software, it may be necessary
to Master Reset the STB.
TO SET PARENTAL LOCK
Press MENU, select Parental Lock and enter your password. Default password is ‘0000’.
STB TO STB COPY FUNCTION
1. Connect download cable to ‘RS232’ connectors (C12) on both STB.
2. Connect power to master STB and switch it on. Go to INSTALL menu and select Data
Download and enter your password. Select STB to STB Download and press OK. Select
option and press OK. ‘Downloading’ message will appear.
3. Connect power to slave STB. After initialising it will start download.
4. When finished, the slave STB will re-initialise.
Parental Lock
Configuration
Lock: Press left / right and select ‘On’.
STB Lock: To lock the full operation of the STB
select ‘On’
Old Password: With 0~9 keys enter your
password. Default is ‘0000’.
New Password: With 0~9 keys enter your new
password when you wish to change it.
Confirm: With 0~9 keys enter your new password
again.
TO UPGRADE SOFTWARE VIA PC
Connect NUL MODEM cable (see below) to RS232 connector C12. The software is
zipped file.
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
LNB Power & Polarization
Vertical + 13V, Horizontal + 18V, Max Current 500 mA,
Short Circuit Protection
22KHz Tone
Frequency 22 KHz +/- 2 KHz, Amplitude 0.7 +/- 0.2V
Version 1.0, 1.2 & USALS
QPSK
1-45 Ms/s, SCPC & MCPC
Convolutional Code Rate, 1/2, 2/3, 3/4, 5/6 and 7/8
with constraint length K=7
DiSEqC Control
Demodulation
Input Symbol Rate
FEC Decoder
EDITING TP IN CHANNEL SEARCH MENU
Press MENU, go to INSTALL and select Channel Search. Configure following items.
System Memory
Main Core Processor
Flash Memory
SDRAM
EEPROM
Channel Memory
Language Menu
ST-5119 @ 200 MHz
2MB
16MB
8KB
Adding TP
Satellite: Press OK and select satellite. Press right key and go to Scan Mode and select
Manual TP / All Ch. TP Data will open. Press left / right and select User TP 1. Enter,
Frequency, Polarity and S/R. Press EXIT and TP Data will close. Added TP is already
selected for channel search. Press blue key. After tuning it will store the TP. To add
another TP select User TP 2.
6000 Channels
English, French, German, Spanish, Italian, Portuguese,
Danish, Swedish, Norwegian, Finish, Polish, Russian,
Greek, Turkish, Farsi & Arabic
Editing TP
MPEG Transport Stream, A/V Decoding
Same as adding but select the required TP and edit its data.
Transport Stream
Profile Level
Input Rate
MPEG-2 ISO/IEC 13818
Transport Stream Specification MPEG-2 MP@ML
Max. 90 Mbit/s
TROUBLE SHOOTING GUIDE
If you suspect there is a problem with your STB, please check the following.
Aspect Ratio
4:3 Letter Box, 4:3 Pan & Scan, 16:9 Wide
720X576 @ 25Hz, 720X480 @ 30Hz
MPEG/Musicam Layer I & II
Single Channel, Dual Channel, Joint Stereo & Stereo
16, 22.05, 24, 32, 44.1 and 48 KHz
S/PDIF
Video Resolution
Audio Decoding
Audio Mode
Sampling Rate
Digital Audio
WARNING! Do not attempt to repair the STB yourself. Tampering with the receiver may
result in fatal electric shock and will invalidate your warranty.
Front display not lit --- Check power lead is connected and the power is on.
No picture or sound --- Check TV is tuned for correct UHF channel or is switched to
correct AV input. Channel is scrambled.
No signal --- Check antenna position. Check LNB wire is not damaged or shorting. Check
LNB may be faulty. Unplug receiver from power socket and retry.
Interference, on picture, using UHF output --- Local terrestrial channel interference.
Change UHF output channel to different one and re-tune your TV. Select the appropriate
‘TV Standard’ using TV Settings menu.
Picture with blocking or frozen --- Signal is weak. Check signal & quality in Channel
Search menu. Check antenna position.
Remote control not working --- Check the batteries and replace with new. Check front
panel of STB is not obstructed.
You have lost or forgotten your password --- Apply master password or contact your
Manhattan dealer.
A/V & Data In / Out
TV SCART
Video Output (CVBS, RGB). Audio output with Volume
Control (Resolution: 20 bits DAC, Max 2Vrms)
Video Output (CVBS) Video Input (CVBS) Audio Output
(Resolution: 20bits DAC Max.1Vrms)
RCA / Cinch, Video Output (CVBS)
RCA/Cinch Volume & Mute Control
VCR SCART
Video
Audio R/L
S/PDIF
RS-232
Digital audio Output, RCA (Resolution: 20 bits)
Transfer rate 115.2 Kbps 9 Pin D-sub type
RF-Modulator (OPTIONAL)
RF-Connector
Frequency
75 Ohm, IEC 169-2 Male/Female
470 to 850 MHz
GENERAL SPECIFICATIONS
Output Channel
Multi TV Standards
Preset Channel
CH 21 – 69 for the re-modulator
PAL G, I, K, M & NTSC M
CH 64 (software changeable by Menu)
Conditional Access Interface
Smart Card Reader
PCMCIA
2 Embedded Card Slots
1 Common Interface (CI) Slot
Power Supply
Input Voltage
Type
Power Consumption
Standby
Digital Tuner & Demodulator
Input Connector
90 to 240 VAC, 50/60 Hz
SMPS
Max 25W
7.2W
F-Type, IEC, 169-24, Female
Input
Frequency
&
Loop 950 MHz to 2150 MHz
through range
Input Impedance
Signal Level
75 ohm unbalanced
-25 to –65 dBm
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Physical Specifications
Size (W X H X D)
Weight (Net)
W 280 mm, H 48 mm, D 218 mm
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice
--------------------------------------------------------------------------------------------------
MASTER PASSWORD 6699
This is the master password for your STB. Cut this section out and keep it in a safe place.
It will be useful later if you forget or lose your password.
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|