Lithium-ion range 2009
Tough tools for professionals
Satisfying the professional’s needs
The quickest, lightest and most powerful battery technology.
Makita presents the evolut-ion of a battery and charging system with the industry dominating
Makita Li-ion technology. The expanded range offers a comprehensive, faster, lighter, more
powerful and longer lasting selection of tough professional cordless tools.
Download from Www.Somanuals.com. All Manuals Search And Download.
18v SDS+ Rotary hammer drills
18v Combis
5
6
18v Drill drivers
7
18v Angle drills
8
18v Impact drivers
18v Angle impact driver
18v Impact wrenches
18v Auto-feed screwdrivers
18v Stapler
8
9
9
10
11
11
12
12
13
13
14
14
14
15
15
15
16
17
18
18
19
20
21
21
22
22
23
23
23
24
24
24
25
26
26
27
27
28
29
18v Circular saws
18v Metal cutting saw
18v 115mm Angle grinder
18v Reciprocating saws
18v Jigsaw
18v Portable band saw
18v Nibbler
18v Vibrating poker
18v Chainsaw
18v Blower
18v Cordless torch
18v Combi kits
Site radio
14.4v SDS+ hammer drill
14.4v Combis
14.4v Drill drivers
14.4v Angle drills
14.4v Impact drivers
14.4v Angle impact driver
14.4v Auto-feed screwdriver
14.4v Stapler
14.4v Pin nailer
14.4v Circular saw
14.4v 115mm Angle grinder
14.4v Jigsaw
14.4v Chainsaw
14.4v Blower
14.4v Cordless torch
10.8v Drill drivers
10.8v Impact driver
7.2v In-line drill drivers
7.2v In-line impact driver
7.2v Cordless gas nailer
Accessories
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Variable speed trigger
Electronic power control
Forward/reverse rotation
2 mechanical gears
3 mechanical gears
Electronic brake
Optimum Charging
System
40% LIGHTER
▼CURRENT▼VOLTAGE ▼THERMAL▼
2000+ CYCLES
ACTIVE
Key-less chuck
430% MORE RUN TIME
22 MINUTE CHARGE TIME
Dust collecting
<CONTROLS>
SDS plus shank
Torque settings
16
A REVOLUTIONARY
BATTERY TECHNOLOGY
Torque limiter
Tool-less blade change
Orbital cutting
T
Makita’s Lithium-ion tools have proved
market winners and now Makita’s
expanded range offers a comprehensive,
powerful and lightweight selection of
professional tools to complete any job.
Job light
Carry case included
The long-lasting Lithium-ion batteries are
40% lighter than a similar Nickel Metal
Hydride (Ni-MH) battery. Lithium-ion
batteries feature a high energy density
technology that will deliver 430% more
working capacity during the lifetime
of this battery compared to traditional
Ni-Cad batteries. Lithium-ion batteries
have an extended length of time during
which they hold their charge – even after
a long period of storage the batteries will
deliver their power.
It is recommended that safety equipment
such as eye and ear protection is used
when operating powertools.
Makita reserve the right to change specifications
at any time owing to their policy of constant
improvement.
Accessories shown are not necessarily supplied
as standard equipment.
Subject to availability. E&OE.
All machines in this catalogue
conform to CE Marking Regulations.
Makita are a member of the
European Power Tool Association.
Customer care: 01908 211678
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MORE POWER LESS WEIGHT
AIR FLOW AROUND THE BATTERY
Lithium-ion’s weight saving
For optimum efficiency battery
cells need to be kept at a cool
means 18 volt power can
be obtained by a battery
temperature during charging.
that weighs the same as a
To enable each cell in the battery
12 volt Ni-MH battery. Reducing weight whilst
retaining power has obvious positive effects
on operator fatigue.
to be cooled the unit needs to be designed
in such a way that air flow around the battery
is maximised. Unlike some other Lithium-ion
battery types the Makita battery design
allows each cell to be kept at an optimum
temperature which extends the battery life.
EXTENDED BATTERY LIFE
Lithium-ion batteries have greater
life spans than their Ni-MH or
Unbalanced cooling will give rise to cells
who’s capacities vary and discharge at
different rates, this can result in a battery
that has a reduced run time, cycle life
and capacity.
Ni-Cad counterparts this is due to
the increased number of charging
cycles Lithium-ion offers and the run time
between charges.
2000+ CYCLES TESTED UNDER LOAD
Makita Lithium-ion batteries have
balanced cooling = LONG LIFE.
Makita have obtained the cycle
life figure of 2000+ by testing the
Lithium-ion 18v 3.0Ah battery
Hot
under load. 50mm tapping screws
were screwed into standard pine, replicating
actual use conditions.
OPTIMUM CHARGING
Cool
Makita can achieve the massive
2000+ cycles from their Lithium-ion
batteries because of the Optimum
Unbalanced cooling = SHORT LIFE.
Charging System. This unique
system enables the battery and
Hot
charging system to talk to each other via a
built in CPU in the charger and CPU in the
battery. These two key elements are vital in
extending the batteries working life.
Out of air flow
Cool
Through this two way communication
between charger and battery, the charger
can recognise the battery and recall its
charging history, analyse the batteries
condition and usage and charge the
battery accordingly.
Without cooling = SHORT LIFE.
Hot
Enclosed cell
Cool
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHARGING CYCLES PER BATTERY
Makita 18V Li-ion 3.0Ah
Competitor A 18V Li-ion 2.0Ah
Competitor B 18V Li-ion 2.6Ah
Competitor C 18V Li-ion 3.0Ah
Competitor D 18V Li-ion 3.0Ah
2000+
2000
1000
1300
No published data
0
500
1000
1500
2000
CYCLES
1 charge = 1 cycle.
Manufacturer data taken from published material.
RUN TIME OF BATTERY
Makita 18V Li-ion 3.0Ah
Competitor A 18V Li-ion 2.0Ah
Competitor B 18V Li-ion 2.6Ah
Competitor C 18V Li-ion 3.0Ah
Competitor D 18V Li-ion 3.0Ah
430%
200%
400%
300%
200%
0
100
200
300
400
PERCENTAGE
Run time figures are the manufacturers percentages calculated
against their own Ni-Cad batteries. Ni-Cad indexed at 100%
Manufacturer data taken from published material.
WEIGHT SAVING AGAINST OWN Ni-Cad BATTERY
Makita 18V Li-ion 3.0Ah
Competitor A 18V Li-ion 2.0Ah
Competitor B 18V Li-ion 2.6Ah
Competitor C 18V Li-ion 3.0Ah
Competitor D 18V Li-ion 3.0Ah
40%
35%
40%
40%
25%
0
10
20
30
40
PERCENTAGE
Weight figures are the manufacturers percentages calculated
against their own Ni-Cad batteries.
Manufacturer data taken from published material.
CHARGING TIME PER BATTERY
Makita 18V Li-ion 3.0Ah
Competitor A 18V Li-ion 2.0Ah
Competitor B 18V Li-ion 2.6Ah
Competitor C 18V Li-ion 3.0Ah
Competitor D 18V Li-ion 3.0Ah
22 min
60 min
30 min
45 min
60 min
Manufacturer data taken from published material.
Customer care: 01908 211678
4
Download from Www.Somanuals.com. All Manuals Search And Download.
18 VOLT
18v SDS+ rotary hammer
18v SDS+ rotary hammer
18v SDS+ rotary hammer
BHR241RFE
BHR241Z*
x2
BHR240RFE
BHR240Z*
x2
BHR202RFE
BHR202Z*
x2
v
1v
18v
Max. in steel
Max. in wood
Max. in concrete
Blows per minute
Impact energy
Vibration:
Rotary hammer
Hammer only
No load speed
Net weight
13mm
26mm
20mm
Max. in steel
Max. in wood
Max. in concrete
Blows per minute
Impact energy
Vibration:
Rotary hammer
Hammer only
No load speed
Net weight
13mm
26mm
18mm
Max. in steel
Max. in wood
Max. in concrete
Blows per minute
Impact energy
Vibration:
Rotary hammer
Hammer only
No load speed
Net weight
13mm
26mm
20mm
0-4,000bpm
1.9J
0-4,000bpm
1.93J
0-4,000bpm
1.93J
12.5m/s2
9.5m/s2
0-1,100rpm
3.2kg
14m/s2
11.5m/s2
0-1,100rpm
3.0kg
14.5m/s2
11.0m/s2
0-1,100rpm
3.2kg
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Standard Equipment
Fast charger
Battery cartridges
Side handle
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Depth rod
Depth rod
Case
Case
Case
A light weight, powerful and
comfortable 3 mode hammer.
A light weight, powerful and
comfortable 3 mode hammer.
Compact and light weight
3 mode hammer.
:: 3 mode operation:
:: 3 mode operation:
:: 3 mode operation:
rotary only, hammer only
rotary only, hammer only
rotary only, hammer only
and rotary hammer.
and rotary hammer.
and rotary hammer.
:: Rubberised ergonomic handle.
:: Rubberised ergonomic handle.
:: LED Job light with afterglow.
:: Rubberised ergonomic handle.
LIMITED
STOCK
16
* Body only “Z” versions are supplied without battery, charger and case.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
18 VOLT
18v Combi drill 3 speed
18v Combi drill 2 speed
18v Combi drill 2 speed
BHP451RFE
BHP451RFE3
BHP451Z*
x2
BHP452RFE
BHP452RFE3
BHP452Z*
x2
BHP453RFE
BHP453Z*
x2
18v
x3
v
x3
1v
Max. in steel
Max. in wood
Max. in masonry
Max. torque
Blows per
13mm
65mm
16mm
80Nm
Max. in steel
Max. in wood
Max. in masonry
Max. torque
Blows per
13mm
38mm
13mm
50Nm
Max. in steel
Max. in wood
Max. in masonry
Max. torque
Blows per
13mm
36mm
13mm
42Nm
3: 0-25,500bpm
2: 0-9,000bpm
1: 0-4,500bpm
3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
2.2kg
2: 0-22,500bpm
1: 0-6,000bpm
2: 0-1,500rpm
1: 0-400rpm
1.8kg
2: 0-19,500bpm
1: 0-6,000bpm
2: 0-1,300rpm
1: 0-400rpm
1.9kg
minute
minute
No load speed
minute
No load speed
No load speed
Net weight
Battery
Net weight
Battery
3.0Ah Li-ion
3.0Ah Li-ion
Net weight
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Standard Equipment
Fast charger
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Depth rod
Belt clip
Case
Battery cartridges
2 screwdriver bits
Belt clip
Battery cartridges
Double ended bit
Case
Case
Compact and light
weight for control
and maneuverability.
Compact and light
weight for control
and maneuverability.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
High operation efficiency
with high torque.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
:: Three speed gear box
one-hand bit replacement.
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
METAL
GEAR BOX
80
16
16
16
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
6
Download from Www.Somanuals.com. All Manuals Search And Download.
18v Drill driver 3 speed
18v Drill driver 2 speed
18v Drill driver 2 speed
BDF451RFE
x2
BDF452RFE
BDF452RFE3
BDF452Z
x2
BDF453RFE
x2
x3
x3
BDF451RFE3
18v
Max. in steel
Max. in wood
Max. torque
13mm
65mm
80Nm
Max. in steel
Max. in wood
Max. torque
13mm
38mm
50Nm
Max. in steel
Max. in wood
Max. torque
13mm
36mm
42Nm
No load speed
3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
2.1kg
No load speed
2: 0-1,500rpm
1:0-400rpm
1.8kg
No load speed
2: 0-1,300rpm
1: 0-400rpm
1.8kg
Net weight
Battery
Net weight
Battery
Net weight
Battery
3.0Ah Li-ion
3.0Ah Li-ion
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Case
Belt clip
Case
Compact and light
weight for control
and maneuverability.
Compact and light
weight for control
and maneuverability.
High operation efficiency
with high torque.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
:: "Single sleeve" keyless
chuck allows for easy
:: Three speed gear box
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
one-hand bit replacement.
:: LED job light with afterglow.
one-hand bit replacement.
METAL
GEAR BOX
80
16
16
16
* Body only “Z” versions are supplied without battery, charger and case.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
18 VOLT
18v 4 Function combi
18v Angle drill
BDA350RFE
BDA350Z*
BDA351RFE (Key-less chuck) x2
BDA351Z* (Key-less chuck)
18v Impact driver
x2
BTP140RFE
BTP140Z*
x2
BTD140RFE
BTD140RFE3
BTD140Z*
x2
v
1v
x3
18v
8v
Max. in steel
Max. in wood
Max. in masonry
Max. torque (impact mode) 140Nm
Blows per minute:
10mm
21mm
8mm
Max. in steel
Max. in wood
Max. torque
No load speed
Net weight
10mm
25mm
13.7Nm
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
M4-M8
M5-M14
22mm-125mm
M5-M12
0-1,800rpm
1.6kg
145Nm
Impact
Percussion
No load speed
0-3,200bpm
0-27,600bpm
2: 0-2,300rpm
1: 0-700rpm
1.8kg
Battery
3.0Ah Li-ion
Blows per minute
No load speed
Net weight
0-3,200bpm
0-2,300rpm
1.5kg
Standard Equipment
Fast charger
Battery cartridges
Side handle
Chuck key (BDA350 only)
Case
Battery
3.0Ah Li-ion
Net weight
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Choose between two
chuck configurations
to suit your needs.
Case
Compact with overall length
of only 146mm.
4 Operation modes for
:: Compact and light weight.
:: The keyed chuck has extra
compact head height.
ultimate versatility: Impact
driver, screwdriver, rotary
drill and percussion drill.
:: Weights only 1.5kg
for easy handling.
:: LED job light with afterglow.
:: Phosphorescent bumper.
:: LED Job light with afterglow.
:: One-touch mode selection
by operating only one lever,
operation mode can be
selected from the four.
:: LED job light with afterglow.
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
140
145
BDA350
BDA351
16
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
8
Download from Www.Somanuals.com. All Manuals Search And Download.
18v Brushless Impact driver
18v Angle impact driver
18v Impact wrench
BTD144RFE
BTD144Z*
x2
BTL061RFE
BTL061Z*
x2
BTW251RFE x2
v
1v
18v
BTW251Z*
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
M4-M8
M5-M14
22mm-125mm
M5-M12
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
M4-M8
M4-M12
22mm-75mm
M4-M8
Drive shank
Max. torque
Blows per minute
No load speed
Net weight
1/2” square
230Nm
0-3,200bpm
0-2,100rpm
1.7kg
160Nm
60Nm
Blows per minute 3: 0-3,400bpm
2: 0-2,800bpm
Blows per minute
No load speed
Net weight
0-3,000bpm
0-2,000rpm
1.7kg
Battery
3.0Ah Li-ion
1: 0-1,300bpm
Standard Equipment
Fast charger
Battery cartridges
Belt clip
No load speed
3: 0-2,600rpm
2: 0-2,000rpm
1: 0-1,300rpm
1.5kg
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Net weight
Battery
Case
3.0Ah Li-ion
High operation efficiency
with high torque.
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Case
:: Weights only 1.7kg
for easy handling.
:: Phosphorescent bumper.
:: LED Job light with afterglow.
:: 1/2” square drive.
Compact angled head for
easy access in tight places.
Case
:: Convenient reverse switch.
:: High comfort grips.
:: LED Job light with afterglow.
Maintenance free working
and more work per battery.
:: LED Job light with afterglow
and off switch.
:: Electronic speed control.
1/4”
HEX DRIVE
1/4”
HEX DRIVE
DIN STANDARD
DIN STANDARD
60
230
160
* Body only “Z” versions are supplied without battery, charger and case.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
18 VOLT
18v Impact wrench
18v Auto-feed screwdriver
18v Auto-feed screwdriver
x2
BTW450RFE x2
BTW450Z*
BFR750RFE
BFR750RFE3
BFR750Z*
BFR550RFE
BFR550Z*
x2
v
1v
x3
18v
1v
Drive shank
Max. torque
Blows per minute
No load speed
Net weight
1/2” square
440Nm
2,200bpm
1,600rpm
3.4kg
Capacities:
Diameter
Length
No load speed
Net weight
Battery
Capacities:
Diameter
Length
No load speed
Net weight
Battery
4mm
45-75mm
4,000rpm
2.3kg
4mm
25-55mm
4,000rpm
2.3kg
Battery
3.0Ah Li-ion
3.0Ah Li-ion
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Case
Belt clip
Belt clip
Case
Case
High operation efficiency
with 440Nm of torque.
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
:: Same 440Nm of torque in
both rotational directions.
:: large protective front bumper.
:: LED Job light with afterglow.
:: Easy to operate rocker trigger.
:: Improved casing.
:: Improved casing.
:: Anti tilt device prevents the
screw from swaying.
:: Anti tilt device prevents the
screw from swaying.
:: Dust proof construction.
:: New silent clutch.
:: Dust proof construction.
:: New silent clutch.
:: Foldable screw guide keeps
screw strips free from tangle.
:: Foldable screw guide keeps
screw strips free from tangle.
440
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
10
Download from Www.Somanuals.com. All Manuals Search And Download.
18v Stapler
BST221RFE
BST221Z*
18v Circular saw
18v Circular saw
BSS611Z*
18v
x2
BSS610RFE
BSS610RFE3
BSS610Z*
x2
v
x3
1v
Capacities:
Width
Length 10, 13, 16, 19 and 22mm
Staple gauge
Magazine capacity
Net weight
Max. cut @ 90°
Max. cut @ 45°
Max. cut @ 50°
Blade diameter
Bore diameter
No load speed
Net weight
57mm
40mm
36mm
165mm
20mm
Max. cut @ 90°
Max. cut @ 45°
Max. cut @ 50°
Blade diameter
Bore diameter
No load speed
Net weight
57mm
40mm
36mm
165mm
20mm
10mm
0.6 x 1.2mm
98 Staples
2.3kg
3,700rpm
3.2kg
3,700rpm
3.1kg
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Standard Equipment
Saw blade
Guide rule
Goggles
Hex wrench
Case
Guide rule
Hex wrench
Lightweight and compact.
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
Case
:: Large lock-off lever.
:: Removable dust nozzle.
:: Rubberised ergonomic handle.
Lightweight and compact.
:: Smooth and powerful cutting
at the high rotational speed
of 3,700 rpm delivered from
enhanced motor.
Machined aluminium
magazine for precision
and durability.
:: Easy to trace cutting line with
LED job light and Built-in
blow-off nozzle.
:: Single trigger switch.
:: Depth adjustment.
:: Rubberised ergonomic handle.
:: Rubberised ergonomic handle.
* Body only “Z” versions are supplied without battery, charger and case.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
18 VOLT
18v Circular saw
18v Metal cutting saw
18v 115mm Angle grinder
BSS501RFE
BSS501Z*
x2
BCS550RFE
BCS550Z*
x2
BGA452RFE x2
BGA452RFE3
BGA452Z*
v
1v
x3
18v
Max. cut @ 90°
Max. cut @ 45°
Blade diameter
Bore diameter
No load speed
Net weight
51mm
35mm
136mm
20mm
3,600rpm
2.6kg
Max. cut @ 90°
51mm
Wheel diameter
Bore size
No load speed
Net weight
Battery
115mm
22mm
10,000rpm
1.9kg
mild
Material thickness
Blade diameter
Bore diameter
No load speed
Net weight
3mm
steel
136mm
20mm
3,600rpm
2.4kg
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Standard Equipment
Fast charger
Battery cartridges
TCT saw blade
Hex wrench
Battery cartridges
Lock nut wrench
Side handle
Abrasive wheel
Case
Guide rule
Hex wrench
Case
Safety goggles
Case
Powerful angle grinder now
free from the restriction of
cables and power sockets.
Lightweight and compact.
Lightweight and compact.
:: Large lock-off lever.
:: Smooth and powerful cutting
at the high rotational speed
of 3,400 rpm delivered from
enhanced motor.
:: Easy to trace cutting line
with LED job light.
:: Capable of using wheels or
discs for mains Grinders.
:: Easy-to-grip, small
circumference motor housing.
:: Anti-restart function for safety
(with warning lamp).
:: Removable dust nozzle.
:: Easy to trace cutting line
with LED job light.
:: Rubberised ergonomic handle.
:: Rubberised ergonomic handle.
:: Electronic current limiter
(with warning lamp).
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
12
Download from Www.Somanuals.com. All Manuals Search And Download.
18v Reciprocating saw
18v Reciprocating saw
BJR182Z*
18v Jigsaw
BJV180RFE
BJV180Z*
1v
x2
BJR181RFE
BJR181RFE3
BJR181Z*
x2
x3
v
Max. cut in wood
Max. cut in pipe
Length of stroke
Strokes per min
Net weight
255mm
130mm
28mm
Max. cut in wood
Max. cut in pipe
Length of stroke
Strokes per min
Net weight
Battery
255mm
130mm
28mm
Max. cut in wood
Max. cut in steel
Length of stroke
Strokes per min
Net weight
135mm
10mm
26mm
0-2,900spm
3.7kg
3.0Ah Li-ion
0-2,900spm
3.5kg
3.0Ah Li-ion
0-2,600spm
2.8kg
3.0Ah Li-ion
Battery
Battery
Standard Equipment
Fast charger
Standard Equipment
Reciprocating saw blade
Standard Equipment
Fast charger
Battery cartridges
Reciprocating saw blade set
Hook
Battery cartridges
Hex wrench
Anti splinter device
Cover plate
Extra high cutting speed
model with large variable
speed trigger.
Case
Dust nozzle
Extra high cutting speed with
large variable speed trigger.
:: Tool-less blade change
and Tool-less shoe
adjustment.
Case
Lightweight and compact.
:: Tool-less blade change
and Tool-less shoe
adjustment.
:: Dust preventing air flow
protects the front head
mechanism.
:: Dust preventing air flow
protects the front head
mechanism.
:: Twin LED job light
with afterglow.
:: Smooth and powerful cutting
at the high stroke speed
of 2,600 spm.
:: Easy to trace cutting line with
LED job light.
:: Twin LED job light
with afterglow.
:: Rubberised ergonomic handle.
T
T
T
* Body only “Z” versions are supplied without battery, charger and case.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
18 VOLT
18v Portable band saw
18v Nibbler
BJS130RFE
BJS130Z*
18v Vibrating poker
x2
BPB180RFE
x2
BVR350RFE
x2
Max. cut in pipe:
Round pipe
Square pipe
Blade speed
Net weight
Cutting capacity:
Mild steel
Stainless steel
Strokes per min
Net weight
Vibration
13,000vpm
25mm
800mm
3.2kg
3.0Ah Li-ion
120mm Dia
120 x 120mm
1.4 - 2.7m/s
6.4kg
1.3mm
1.0mm
2,800spm
2.3kg
Shaft diameter
Shaft length
Net weight
Battery
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Case
Standard Equipment
Fast charger
Battery cartridges
Hex wrench 4mm
Carbon steel saw blade
Case
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Belt clip
Case
Bi-directional switch for
more convenient use.
Light weight and well
balanced tool design.
Compact and light for
easy handling and high
maneuverability.
:: Ergonomically designed
for maximum efficiency
and minimum fatigue
in operation.
:: Electronic current limiter.
:: LED Job Light with afterglow.
:: Speed Preset Dial allows
adjustment of the blade
speed to suit material or
desired finish.
:: 360° swivelling shear head.
:: On tool storage for hex wrench.
:: Lock off button for
:: Enhanced protective cover.
safe operation.
Customer care: 01908 211678
14
Download from Www.Somanuals.com. All Manuals Search And Download.
18v Chainsaw
BUC122Z*
18v Blower
BUB182Z*
18v Cordless torch
BML185*
Cutting capacity
Chain speed
Chain pitch
Chain gauge
Net weight
115mm
5.0m/sec
1/4”
Max air volume
Max air velocity
Max air pressure
Net weight
2.3m3/min
72m/sec
5.4kPa
BML185 Bulb
Net weight
Battery
Xenon
0.36kg
3.0Ah Li-ion
25AP
2.5kg
1.7kg
not supplied
Battery
3.0Ah Li-ion
Rubberised soft grip,
ergonomically designed.
Standard Equipment
Bulb
Standard Equipment
File
Wrist strap
:: Vacuum function.
Chain oil
Chain bar cover
:: Variable speed trigger.
:: 3 stage air setting dial.
Rubberised soft grip,
ergonomically designed.
Low fatigue trimming
and pruning, for use on
branches, saplings and
the like.
:: 4 position pivoting head with
positive stops at 0, 45, 90,
110 degrees.
:: Replacement Xenon bulb
stored in the head case.
:: With over discharge
protection circuit.
:: Tool-less chain tensioning
and blade change.
:: Rubberised ergonomic handle.
:: Automatic oiling.
:: Falling impact strength
of 1m enough to protect
the bulb.
For multi voltage lamp
(BML184) see page 25
T
15
Download from Www.Somanuals.com. All Manuals Search And Download.
18 VOLT
18v 2pc Combi kit
18v 2pc Combi kit
18v 4pc Combi kit
x3
x2
x2
LXT202
LXT231
LXT425
Combi drill
Impact driver
Battery
BHP451Z
BTD140Z
3.0Ah Li-ion
Combi drill
Jigsaw
Battery
BHP452Z
BJV180Z
3.0Ah Li-ion
Combi drill
Jigsaw
Angle grinder
Torch
BHP452Z
BJV180Z
BGA452Z
BML185
Standard Equipment
Fast charger
Standard Equipment
Fast charger
Battery
3.0Ah Li-ion
2 Battery cartridges
Case
2 Battery cartridges
Case
Standard Equipment
Fast charger
3 Battery cartridges
Case
Customer care: 01908 211678
16
Download from Www.Somanuals.com. All Manuals Search And Download.
18v 4pc Combi kit
18v 6pc Combi kit
Site radio
BMR100
x3
x3
LXT400
LXT600
Combi drill
Circular saw
Impact driver
Torch
BHP451Z
BSS610Z
BTD140Z
BML185
3.0Ah Li-ion
Combi drill
Circular saw
Reciprocating saw
Impact driver
Angle grinder
Torch
BHP451Z
BSS610Z
BJR181Z
BTD140Z
BGA452Z
BML185
Frequency:
FM
AM
Dimensions:
LxWxH 10 1/2" x 6 1/2" 12 1/7"
Net Weight
Power Supply:
AC
87.5-108Mhz
522-1629kHZ
Battery
4.2kg
Standard Equipment
Fast charger
Battery
3.0Ah Li-ion
power adaptor
3 Battery cartridges
Soft tool bag
Standard Equipment
Fast charger
DC
9.6v-24v battery
3 Battery cartridges
Soft tool bag
Standard Equipment
AC power adaptor
Powered by any Makita
9v-24v cluster, slide battery
or mains adaptor.
:: AUX input for an MP3 player.
:: Bumpers and metal bars
protect against rough handling.
:: Shower Proof.
9.6v
24v
* Body only “Z” versions are supplied without battery, charger and case.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4 VOLT
14.4v SDS+ Hammer drill
14.4v Combi drill 3 speed
14.4v Combi drill 2 speed
BHR162RFE
BHR162Z*
x2
BHP441RFE
BHP441RFE3
x2
BHP442RFE
BHP442RFE3
BHP442Z*
x2
x3
x3
Max. in steel
Max. in wood
Max. in concrete
Blows per minute
Impact energy
Vibration
No load speed
Net weight
Battery
13mm
24mm
16mm
Max. in steel
Max. in wood
Max. in masonry
Max. torque
Blows per
13mm
50mm
14mm
70Nm
Max. in steel
Max. in wood
Max. in masonry
Max. torque
Blows per
13mm
32mm
13mm
44Nm
0-5,000bpm
1.2J
3: 0-25,500bpm
2: 0-9,000bpm
1: 0-4,500bpm
3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
2.1kg
2: 0-21,000bpm
1: 0-6,000bpm
2: 0-1,400rpm
1: 0-400rpm
1.7kg
12.5m/s2
0-1,500rpm
2.1kg
minute
minute
No load speed
No load speed
3.0Ah Li-ion
Net weight
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
Net weight
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Case
Light weight drilling at 2.1kg.
Depth rod
Belt clip
Light weight and compact for
working in difficult areas.
:: Dual operation mode
"rotary only and rotary
hammer”.
:: High comfort grips.
:: Conveniently located push
button for rotation reverse.
:: LED Job light with afterglow.
:: Compact, lightweight and
effective fixings hammer.
Case
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
High operation efficiency
with high torque.
one-hand bit replacement.
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
METAL
GEAR BOX
70
16
16
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
18
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4v Combi drill 2 speed
14.4v Drill driver 3 speed
14.4v Drill driver 2 speed
x2
x2
BHP343RH
BHP343Z*
x1 1.5Ah
BDF441RFE
BDF442RFE
x3
BDF442RFE3
Max. in steel
Max. in wood
Max. in masonry
Max. torque
Blows per
10mm
25mm
10mm
Max. in steel
Max. in wood
Max. torque
13mm
50mm
70Nm
Max. in steel
Max. in wood
Max. torque
13mm
38mm
44Nm
36Nm
No load speed
3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
2.0kg
No load speed
2: 0-1,400rpm
1:0-400rpm
1.7kg
2: 0-19,500bpm
1: 0-6,000bpm
2: 0-1,300rpm
1: 0-400rpm
1.5kg
minute
No load speed
Net weight
Battery
Net weight
Battery
3.0Ah Li-ion
3.0Ah Li-ion
Net weight
Battery
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
1.5Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
Case
Belt clip
Case
Light weight and compact for
working in difficult areas.
High operation efficiency
with high torque.
High operation efficiency
with high torque.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
:: "Single sleeve" keyless
chuck allows for easy
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
one-hand bit replacement.
one-hand bit replacement.
METAL
GEAR BOX
70
16
16
16
* Body only “Z” versions are supplied without battery, charger and case.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4 VOLT
14.4v Drill driver 2 speed
14.4v 4 Function combi
14.4v Angle drill
x2
x2
BDF343RH
BDF343Z*
x1 1.5Ah
BTP130RFE
BTP130Z*
BDA340RFE
BDA340Z*
x2
BDA341RFE (Key-less chuck)
BDA341Z* (Key-less chuck)
Max. in steel
Max. in steel
Max. in wood
Max. torque
10mm
25mm
36Nm
Max. in steel
Max. in wood
Max. in masonry
Max. torque
Blows per minute:
Impact
10mm
21mm
8mm
10mm
25mm
Max. in wood
No load speed
Net weight
Battery
0-1,800rpm
1.5kg
3.0Ah Li-ion
No load speed
2: 0-1,300rpm
1: 0-400rpm
1.4kg
135Nm
Net weight
Battery
0-3,200bpm
0-28,800bpm
2: 0-2,400rpm
1: 0-700rpm
1.7kg
1.5Ah Li-ion
Percussion
No load speed
Standard Equipment
Fast charger
Battery cartridges
Side handle
Chuck key (BDA350 only)
Case
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
Net weight
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Choose between two
chuck configurations
to suit your needs.
High operation efficiency
with high torque.
Case
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement
:: Compact and light weight.
:: The keyed chuck has extra
compact head height.
4 Operation modes for
ultimate versatility: Impact
driver, screwdriver, rotary
drill and percussion drill.
:: LED job light with afterglow.
:: One-touch mode selection
by operating only one lever,
operation mode can be
selected from the four.
:: LED job light with afterglow.
1/4”
HEX DRIVE
DIN STANDARD
135
BDA340
BDA341
16
16
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
20
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4v Impact driver
BTD130FRFE (blue)
BTD130FRFEW (white)
BTD130FRFER (red)
14.4v Brushless impact driver
x2
BTD132RFE
BTD132ZZ*
x2
8v
x2
1v
8v
x2
Machine screws
Standard bolt
M4-M8
M5-M14
22mm-125mm
M5-M12
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
Blows per minute
High
M4-M8 Spark and maintenance free
M5-M14 working due to the elimination
Coarse thread
High tensile bolt
Max. torque
Blows per minute
No load speed
Net weight
22mm-125mm of carbon brushes with the
M5-M12 introduction of a controller
155Nm unit and sensors. This also
means more work per battery
0-3,200bpm when compared to a brush
0-2,600bpm type motor.
140Nm
0-3,200bpm
0-2,400rpm
1.4kg
Medium
Battery
3.0Ah Li-ion
Low
No load speed
High
Medium
Low
0-1,100bpm
Windings
Permanent magnet
Standard Equipment
Fast charger
Battery cartridges
Belt clip
0-2,400rpm
0-1,800rpm
0-1,100rpm
1.3kg
3.0Ah Li-ion
Controller
Net weight
Battery
Case
Very compact with overall
length of only 146mm.
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
:: Weights only 1.4kg
for easy handling.
Belt clip
:: Phosphorescent bumper.
:: LED Job light with afterglow.
:: Available in a choice
of 3 colours.
Case
Very compact with overall
length of only 155mm.
1/4”
HEX DRIVE
DIN STANDARD
:: LED Job light with afterglow
and off switch.
:: Electronic speed control
140
1/4”
HEX DRIVE
DIN STANDARD
155
Control panel
:: 3 stage speed control
:: Indicator lights
:: Job light on/off
BTD130RFER BTD130RFEW BTD130RFE
† Maintenance free: until the service life of ball bearings is over.
* Body only “Z” versions are supplied without battery, charger and case.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4 VOLT
14.4v Angle impact driver
14.4v Autofeed screwdriver
14.4v Stapler
BST110RFE
BST110Z*
x2
BTL060RFE
BTL060Z*
x2
BFR540RFE
BFR540RFE3
BFR540Z*
x2
x3
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
Blows per minute
No load speed
Net weight
M4-M8
M4-M12
22mm-75mm
M4-M8
Capacities:
Diameter
Length
No load speed
Net weight
Battery
Capacities:
Width
Length
Magazine capacity
Net weight
Battery
4mm
25-55mm
4,000rpm
2.1kg
10mm
7 and 10mm
125 staples
1.9kg
60Nm
0-3,000bpm
0-2,000rpm
1.6kg
3.0Ah Li-ion
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
Standard Equipment
Fast charger
Battery cartridges
Goggles
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Case
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
Case
Compact angled head for
easy access in tight places.
:: Double trigger for
enhanced safety.
:: Convenient reverse switch.
:: High comfort grips.
:: LED Job light with afterglow.
:: Improved casing.
:: Anti tilt device prevents the
screw from swaying.
:: Rubberised ergonomic handle.
:: Dust proof construction.
:: New silent clutch.
:: Foldable screw guide keeps
screw strips free from tangle.
1/4”
HEX DRIVE
DIN STANDARD
60
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
22
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4v Stapler
BST220Z*
14.4v Pin nailer
14.4v Circular saw
BPT350RFE
BPT350Z*
x2
BSS500RFE
BSS500Z*
x2
Capacities:
Width
Length 10, 13, 16, 19 and 22mm
Staple gauge
Magazine capacity
Net weight
Capacities:
Diameter
Length
Nail gauge
Magazine capacity
Net weight
Max. cut @ 90°
Max. cut @ 45°
Blade diameter
Bore diameter
No load speed
Net weight
51mm
35mm
136mm
20mm
3,600rpm
2.5kg
10mm
0.6mm
18, 25, 30 and 35mm
23swg
0.6 x 1.2mm
98 staples
2.3kg
110 nails
2.0kg
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Standard Equipment
Belt clip
Goggles
Standard Equipment
Fast charger
Battery cartridges
Case
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
Guide rule
Dust nozzle
Hex wrench
Case
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
Machined aluminium
magazine for precision
and durability.
Lightweight and compact.
:: LED job light.
:: Double trigger for
:: Large lock-off lever.
enhanced safety.
:: Depth adjustment.
:: Anti-dry-fire mechanism
locks trigger when 3 or less
nails remain in the magazine.
:: Rubberised ergonomic handle.
:: Removable dust nozzle.
:: Easy to trace cutting line
with LED job light.
:: Single trigger switch.
:: Depth adjustment.
:: Rubberised ergonomic handle.
:: Rubberised ergonomic handle.
* Body only “Z” versions are supplied without battery, charger and case.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4 VOLT
14.4v 115mm Angle grinder
14.4v Jigsaw
BJV140RFE
BJV140Z*
14.4v Chainsaw
BUC121Z*
x2
BGA450RFE
BGA450Z*
x2
Wheel diameter
Bore size
No load speed
Net weight
Battery
115mm
22mm
10,000rpm
1.8kg
Max. cut in wood
Max. cut in steel
Length of stroke
Strokes per min
Net weight
135mm
10mm
26mm
Cutting capacity
Chain speed
Chain pitch
Chain gauge
Net weight
115mm
4.8m/sec
1/4”
0-2,600spm
2.7kg
25AP
2.4kg
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Lock nut wrench
Side handle
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Standard Equipment
File
Chain oil
Chain bar cover
Abrasive wheel
Case
Anti splinter device
Cover plate
Dust nozzle
Low fatigue trimming
and pruning, for use on
branches, saplings and
the like.
Powerful angle grinder now
free from the restriction of
cables and power sockets.
Case
Lightweight and compact.
:: Tool-less chain tensioning
and blade change.
:: Rubberised ergonomic handle.
:: Automatic oiling.
:: Capable of using wheels or
discs for mains Grinders.
:: Easy-to-grip, small
:: Smooth and powerful cutting
at the high stroke speed
of 2,600 spm.
circumference motor housing.
:: Anti-restart function for safety
(with warning lamp).
:: Easy to trace cutting line with
LED job light.
:: Rubberised ergonomic handle.
:: Electronic current limiter
(with warning lamp).
T
T
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
24
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4v Blower
BUB142Z*
14.4v Cordless torch
BML145*
18v/14.4v Cordless lamp/torch
BML184*
Max air volume
Max air velocity
Max air pressure
Net weight
2.3m3/min
68m/sec
5.4kPa
BML145 Bulb
Net weight
Battery
Krypton
0.36kg
3.0Ah Li-ion
Bulb
Net weight
Battery
Fluorescent
0.4kg
3.0Ah Li-ion
1.6kg
not supplied
not supplied
Rubberised soft grip,
ergonomically designed.
Standard Equipment
Bulb
Standard Equipment
Bulb
Wrist strap
Shoulder strap
Hook
:: Vacuum function.
:: Variable speed trigger.
:: 3 stage air setting dial.
Rubberised soft grip,
ergonomically designed.
Rubberised soft grip,
ergonomically designed.
:: 4 position pivoting head with
positive stops at 0, 45, 90,
110 degrees.
:: Replacement Xenon bulb
stored in the head case.
:: With over discharge
protection circuit.
:: Dual voltage, both 18v and
14.4v lithium-ion batteries
can be used with this lamp.
:: Falling impact strength
of 1m enough to protect
the bulb.
* Body only “Z” versions are supplied without battery, charger and case.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
10.8 VOLT
10.8v Drill driver
10.8v Drill driver
10.8v Impact driver
x2
x2
x2
DF030WE
DF330WE
TD090WE
Max. in steel
Max. in wood
Max. torque
Torque settings 18 plus drill mode
No load speed
10mm
21mm
24Nm
Max. in steel
Max. in wood
Max. torque
Torque settings 18 plus drill mode
No load speed
10mm
21mm
24Nm
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
Blows per minute
No load speed
Net weight
M4-M8
M5-M12
22mm-90mm
M5-M10
2: 0-1,300rpm
1: 0-350rpm
0.88kg
2: 0-1,300rpm
1: 0-350rpm
1.0kg
90Nm
0-3,000bpm
0-2,400rpm
0.92kg
Net weight
Battery
Net weight
Battery
1.3Ah Li-ion
1.3Ah Li-ion
Battery
1.3Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Half size drill driver which
is light and great for
tight spaces.
Tiny and powerful three jaw
chuck drill driver.
Small and powerful
impact driver.
:: LED job light.
:: LED job light.
:: Ideal for applications
in tight spaces.
:: Hex shank chuck for easy
one handed release.
:: Reversing switch.
:: Ideal for applications
in tight spaces.
:: 3 jaw chuck, ideal for use with
your existing accessories.
:: Reversing switch.
:: LED job light.
:: Impact driver action delivers
90Nm torque.
:: Minimal pressure required
from the operator.
:: Reversing switch.
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
90
Customer care: 01908 211678
26
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 VOLT
7.2v Drill driver
7.2v Screwdriver
7.2v Impact driver
x2
x2
x2
DF010DSE
DF011DS
TD020DSE
Max. in steel
Max. in wood
Max. torque
Torque settings 21 plus drill mode
No load speed
5mm
6mm
5.6Nm
Max. torque
No load speed
Net weight
Battery
4.5Nm
220rpm
0.41kg
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
Blows per minute
No load speed
Net weight
M3-M8
M3-M8
22mm-45mm
M3-M6
1.0Ah Li-ion
2: 650rpm
1: 200rpm
0.55kg
20Nm
Standard Equipment
Fast charger
Battery cartridges
2 x Phillips bits
Case
3,000bpm
2,300rpm
0.53kg
Net weight
Battery
1.0Ah Li-ion
Battery
1.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 x Phillips bits
Case
Standard Equipment
Fast charger
Battery cartridges
Holster
Versatile drill driver for
those hard to get places.
:: LED job light.
:: Use in in-line or pistol mode.
:: Soft start trigger.
6 impact driver bit set
Magnetic bit holder
Clear screw guide inc. Pozi 2 bit
Soft case
Versatile drill driver for
those hard to get places.
:: Reversing switch.
:: LED job light
with on/off switch.
Versatile impact driver for
those hard to get places.
:: Use in in-line or pistol mode.
:: Soft start trigger.
:: Reversing switch.
:: LED job light
with on/off switch.
:: Use in in-line or pistol mode.
:: Impact driver action delivers
20Nm torque.
:: Minimal pressure required
from the operator.
:: Reversing switch.
20
1/4”
HEX DRIVE
1/4”
HEX DRIVE
1/4”
HEX DRIVE
DIN STANDARD
DIN STANDARD
DIN STANDARD
27
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 VOLT
7.2v Cordless gas nailer
x2
GN900SE
The new first fix cordless gas
nailer designed for the demands
of the professional.
Nail type
Max length
Gauge
Magazine capacity
Magazine angle
Shots per battery
Shots per fuel cell
Net weight
Clipped head
50-90mm
2.9-3.3mm
44
Suitable for timber frames, roofing
joists and a host of other applications
Makita now have a better solution
with this portable machine.
34º
4,000
1,200
3.5kg
Battery
1.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Case
No leads, no hoses,
just fast versatile power.
:: 30 minute charge time,
4 times quicker than the
leading competitor.
:: The only gas nailer with
Lithium-ion battery technology.
:: Shock absorbing battery fitting
to protect the terminals.
:: LED low battery and error
detection system.
The only gas nailer with
30 minute
charge time
Lithium-ion battery technology
Customer care: 01908 211678
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
Batteries and chargers
PART NUMBER
DESCRIPTION
TOOL MODEL NUMBER
Batteries
194204-5
194065-3
194558-0
194550-6
194355-4
Chargers
DC18RA
DC18RA/1
DC18SE
DC10WA
DC07SA
18V 3.0 Ah Li-ion battery cartridge
14.4V 3.0 Ah Li-ion battery cartridge
14.4V 1.5 Ah Li-ion battery cartridge
10.8V 1.3 Ah Li-ion battery cartridge
7.2V 1.0 Ah Li-ion battery cartridge
18V Li-ion machines
14.4V Li-ion machines
14.4V Li-ion machines
10.8V Li-ion machines
7.2V Li-ion machines
240V Li-ion quick charger, 22 minute charge time
110V Li-ion quick charger, 22 minute charge time
Automotive charger 12-24V input, 22 minute charge time
240V Li-ion 10.8V charger, 50 minute charge time
240V Li-ion 7.2V charger, 30 minute charge time
18V and 14.4V Li-ion batteries*
18V and 14.4V Li-ion batteries*
18V and 14.4V Li-ion batteries*
10.8V Li-ion batteries
7.2V Li-ion batteries
Accessories
PART NUMBER
DESCRIPTION
TOOL MODEL NUMBER
Impact drivers
194281-7
Adjustable locator set with Ph2
use to control the depth of the screw head
Keyless chuck sutable for impact drivers
with ¼” hex fitting
BTD140, BTD142, BTD130,
BTD132, BTP140, BTP130
BTD140, BTD142, BTD130,
BTD132, BTP140, BTP130
194250-8
Autofeed screwdrivers
194500-1
Chain saws
158476-6
P-19928
Extention handles
BFR540, BFR550, BFR750
Replacement guide bar
Replacement chain
Pruning extention
BUC121,BUC122
BUC121,BUC122
BUC121
194524-7
194523-9
Torch/lamp
A-30542
Pruning extention
BUC122
Replacament bulb set
Replacament bulb set
Replacament bulb set
Replacament florescent tube
BML185
BML145
BML184
BML184
A-83973
B-07303
SM00000050
Battery
194649-7
Battery protector
18V and 14.4V
Li-ion batteries
BL1830 and BL1430
MAKITA ACCESSORIES
made for the best
*To charge stick, Ni-Cad and Ni-MH type batteries the 193947-6 adaptor will be required.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Every Makita Tool is thoroughly inspected
and tested before leaving the factory and is
guaranteed to be free of defects from
This guarantee does not apply where:
•
•
•
Repairs have been made or attempted by others.
Repairs are required because of normal wear and tear.
workmanship and materials for the period of
ONE YEAR from the date of original
The tool has been abused, misused or improperly
maintained.
Alterations have been made to the tool.
purchase. Should any trouble develop during
this one year period, return the COMPLETE tool, freight
prepaid, to EITHER an Authorised Makita Service Agent OR
to Makita (UK) Ltd. If inspection shows the trouble is caused
by defective workmanship or material, Makita will repair
WITHOUT CHARGE.
•
•
This guarantee does not affect your statutory rights.
WARNING: COUNTERFEIT TOOLS
Many fake Makita Tools are being offered for sale.
Don’t fall for the short term saving, they are low quality,
without warranty, and have a minimal professional life.
Buy only genuine Makita Tools through a reputable dealer.
Dealer stamp
Makita UK
Michigan Drive, Tongwell, Milton Keynes, Buckinghamshire MK15 8JD
T: 01908 211678 F: 01908 211400
Satisfying the professional’s needs
98N300 0109
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Lennox Hearth Indoor Fireplace WS User Manual
LG Electronics DVD Recorder RC897T User Manual
LG Electronics Marine Radio MCDD0007801 User Manual
LifeSource Blood Pressure Monitor UA 787EJ User Manual
Lincoln Electric Welding System V300 PRO User Manual
Manitowoc Ice Ice Maker K00160 User Manual
Marantz Computer Monitor PD4240D User Manual
Marantz Projector VP8600BL User Manual
Maxtor Server STM310005CAD00G RK User Manual
MB QUART Car Speaker MBQ12SB4 User Manual