Magnavox TV VCR Combo CCB193AT User Manual

Color TV with built-in VCR  
CCB193AT  
O wners Manual  
Im portant!  
Return your W arranty Registration  
Card within 10 days. See why inside.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction 3  
W elcom e to your TV/VCR owners m anual.  
This manual has seven sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations;  
Recording Options; Playing Options; Additional Features; and Information You May Need. The instructions  
explain all of the TV/VCR’s features, which are listed below.  
Features  
• A-B Repeat Play  
One-Touch Recording  
• Real-Time Counter  
• Remote Control  
• Automatic Channel Setup  
• Automatic Head Cleaner  
• Automatic Operation Features  
• Automatic Tracking Adjustment  
Blue Background  
• Repeat Play  
S-VHS Quasi Play Back (SQPB)  
ShowGuard™ - Indefinite Timer Recording memory  
• Closed Caption  
• Daylight-Savings Time  
Sleep Timer  
SmartClockTM  
• High Quality (HQ) System  
• 19 micron head, improves the picture quality  
during playback of SLP tapes  
SmartLockTM  
Special Effects Playback: Forward and Reverse  
Searching; Still; Slow  
• Timer Recording  
On-screen displays in English or Spanish  
On-screen Menu Programming, accessible with  
remote control or front panel buttons  
Wake Up Timer  
Safety Precautions  
Warning: To prevent fire or shock hazard, do not expose this  
equipment to rain or moisture.  
Federal Communications Commission (FCC) Warning: Any unau-  
thorized changes or modifications to this equipment void the  
users authority to operate it.  
This TV/VCR, equipped with a High Quality (HQ) system, is com-  
patible with existing Video Home System (VHS) equipment.  
Philips Consum er Electronics recommends that you use only  
video cassette tapes that are labeled with the  
mark. The  
use of other tapes may result in poor picture quality and excessive  
deposits on the video heads, which may not be covered by the  
warranty if damage occurs.  
Helpful Hints  
Note to the Cable TV System Installer: This reminder is  
provided to call the Cable TV system installers attention to  
Article 820-40 of the National Electrical Code, which provides  
guidelines for proper grounding – in particular, specifying that the  
cable ground shall be connected to the grounding system of the  
building, as close to the point of cable entry as possible.  
Before doing anything else, record  
the TV/VCR’s model and serial num-  
bers in the spaces provided on page  
two. These numbers will help us  
assist you if you ever call for help.  
Your new product, its packaging,  
and this manual contain materials  
that can be recycled and reused.  
Specialized companies can recycle  
your product to increase the  
amount of reusable materials and  
to minimize the amount that needs  
to be properly disposed.  
Your product uses batteries that  
should not be thrown away when  
depleted but should be disposed of  
as small chemical waste.  
Declaration of Conform ity  
Model Number:  
Trade Name:  
CCB193AT  
Philips  
Responsible Party: Philips Consumer Electronics  
P.O. Box 14810  
Knoxville, TN 37914-1810  
(865) 521-4316  
As an ENERGY STAR® Partner, Philips Consumer  
Electronics has determined that this product meets the  
ENERGY STAR® guidelines for energy efficiency. ENERGY  
STAR® is a U.S. registered mark.  
Using products with the ENERGY STAR® label can save energy.  
Saving energy reduces air pollution and lowers utility bills.  
Please find out about the local regu-  
lations on disposal of your old prod-  
uct, batteries, manual, and packag-  
ing whenever you replace existing  
equipment.  
SmartClockTM, SmartLockTM, and ShowGuardTM are trademarks of  
Philips Consumer Electronics.  
Copyright 2000 Philips Consumer Electronics. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Table of Contents  
Setting Up Your TV/VCR  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7  
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11  
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-17  
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Description of Controls  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23  
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25  
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Basic O perations  
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Recording O ptions  
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-35  
Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Playing O ptions  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
A-B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39  
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Additional Features  
SmartLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-45  
Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-51  
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52  
Inform ation You May Need  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Using the TV/VCR 5  
Putting Batteries in the Rem ote Control  
1
Rem ove the battery com partm ent lid on the bottom of  
the rem ote control by sliding it in the direction of the  
arrow.  
1
2
3
2
Place two AA batteries inside the battery com partm ent  
with their and ends aligned as indicated.  
+
3
Replace the battery com partm ent lid.  
Recording Prevention  
Video cassette tapes have record tabs to ensure that recordings  
are not accidentally erased.  
1
1
2
To prevent accidental recording, break off the tab with a  
screwdriver.  
2
To record again, cover the hole with cellophane tape.  
Using the Rem ote Control  
Point the remote control at the TV/VCR’s remote sensor.  
Do not put objects between the remote control and the  
TV/VCR.  
TV/VCR Maintenance  
In this TV/VCR, use only tapes with the  
mark.  
Make sure any light adhesive stick-on notes are removed from  
the video cassette tape before putting the tape in the TV/VCR.  
Removable labels like these can jam the TV/VCR.  
Periodic maintenance is required to maintain your TV/VCR’s  
excellent performance. This TV/VCR has an automatic head  
cleaning system. However, the video heads will eventually  
require cleaning or replacement. Only an authorized service cen-  
ter should perform this service.  
Helpful Hints  
The remote control and its batteries  
are supplied.  
• Do not mix alkaline and man-  
ganese batteries.  
• Do not mix old and new batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Hooking Up the TV/VCR  
1
Hook up your TV/VCR using one of the connections shown.  
Connect a Cable signal  
or an antenna to the  
ANT(enna) Jack.  
A.  
Hooking Up Your TV/VCR  
W ith a Cable Signal or  
O utdoor Antenna  
ANT.  
ANT.  
Connect the Cable signal to  
the IN Jack on the Cable Box.  
B.  
Connect an RF coaxial cable (75-  
ohm, not supplied) to the OUT Jack  
on the Cable Box and to the  
Hooking Up Your TV/VCR  
W ith a Cable Box  
To view any channel, set the  
TV/VCR to the Cable Box output  
channel (channel 03 or 04). Then,  
select channels at the Cable Box.  
IN  
ANT(enna) Jack on the TV/VCR.  
OUT  
RF coaxial cable  
(not supplied)  
ANT.  
ANT.  
Rod Antenna  
(not supplied)  
C.  
Hooking Up Your TV/VCR  
W ith an Indoor Antenna  
To install a rod antenna (not sup-  
plied), push the stem of the antenna  
into the antenna hole on the top of  
the TV/VCR. Connect the antenna  
wire to the ANT(enna) Jack on the  
back of the TV/VCR as shown.  
Extend the antenna and adjust its  
length, direction, and angle for the  
clearest picture.  
ANT.  
ANT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hooking Up the TV/VCR (contd) 7  
D.  
Hooking Up Your  
TV/VCR to Another  
Video Source  
(VCR or Cam corder)  
You may need this connection  
if you want to copy tapes.  
Details are on page 31.  
Use an Audio cable to connect the AUDIO  
OUT Jack on the VCR to the AUDIO In Jack  
on the front of the TV/VCR.  
AUDIO/VIDEO OUT  
Jacks on VCR  
3CH  
IN  
4CH  
AUDIO VIDEO  
ANT.  
OUT  
OUT  
IN  
AUDIO VIDEO  
AUDIO VIDEO  
STOP REW  
EJECT  
PLAY  
F
.
F
W
D
R
E
C
CHANNEL  
VOLUME  
POWER  
OTR  
E  
3CH  
IN  
4CH  
AUDIO VIDEO  
ANT.  
OUT  
OUT  
IN  
AUDIO/VIDEO In  
Jacks on front of  
TV/VCR  
Use a Video cable to connect the VIDEO OUT Jack on the  
VCR to the VIDEO In Jack on the front of the TV/VCR.  
2
Plug in the TV/VCR’s power cord.  
3
Before you turn on the TV/VCR, go to page eight.  
Helpful Hints  
Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is  
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.  
Audio and video cables are not supplied.  
Bent pin  
Crooked Pin  
Straight Pin  
Plug  
Cable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 Turning On the TV/VCR  
Before you turn on the TV/VCR, make sure batteries are in the  
remote control and the TV/VCR is hooked up correctly.  
The instructions on this page work only when you turn on the  
TV/VCR for the first time.  
POWER  
SLEEP/WAKE UP  
1
2
3
1
PLAY  
REW  
F.FWD  
Press the PO W ER button. The TV/VCR will come on and the  
screen shown below will appear.  
4
STOP  
STATUS/EXIT  
SELECT LANGUAGE  
> ENGLISH  
ON  
1
4
7
2
3
CH.  
ESPAÑOL  
5
8
6
9
SELECT KL OR  
PRESS MENU TO CONTINUE  
VOL  
.
SLOW  
SURF  
0
5
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
2
Press the PLAY/K button or the STO P/L button to select  
English or Spanish on-screen displays and m enus.  
3
Press the MENU button. The screen shown below will appear.  
CONNECT ANTENNA OR CABLE  
TO TVCR  
THEN PRESS  
B
TO END PRESS EXIT  
Helpful Hints  
4
If you do not see any on-screen dis-  
plays when you turn on the TV/VCR,  
check your hookups, then try again.  
If you still do not see any on-screen  
displays, follow the steps on pages  
nine-10 to select a language and  
set up channels.  
To skip step 2, press the MENU  
button. All on-screen displays will be  
in English. To skip step 4, press the  
STATUS/EXIT button. Channels will  
not be set up, and CHANNELS  
NOT SET will appear on the screen  
briefly.  
Press the F.FW D/B button to begin autom atic channel  
setup. The TV/VCR will memorize all available channels. When  
channels are set, CHANNELS ARE SET will appear on the screen  
briefly. Then the TV/VCR will go to the lowest channel pro-  
grammed.  
(If you try to set up channels when there is no antenna or cable  
connected to the TV/VCR, programming will appear to take place,  
but eventually a NO TV SIGNALS ... message will appear on the  
screen. Connect an antenna or cable to the ANT(enna) jack on  
the TV/VCR, then press the F.FWD/B button again. You may  
need to follow the steps on page 10 instead.)  
5
You cannot set up channels if you  
are using a Cable Box.  
Use the CH(annel) m/n button or the Num ber buttons  
on the rem ote control to select a TV/VCR channel. Use  
the VO L(um e) m/n button to adjust the sound.  
Line Input mode will always be  
stored in the TV/VCR’s memory as  
channel 00. When you select chan-  
nel 00, A/V IN will appear on the  
screen briefly. Press the CH(annel)  
m/n button or the Number but-  
tons to select another channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Selection 9  
Follow the steps below to change the language of the on-screen  
displays and menus.  
2-4  
POWER  
SLEEP/WAKE UP  
1
Press the MENU button.  
PLAY  
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
REW  
F.FWD  
STOP  
REMINDER  
STATUS/EXIT  
BRIGHTNESS  
1
1
4
7
2
3
5
CH.  
5
8
6
9
2
Press the PLAY/button or the STO P/button to select  
PRIM. SETUP. Then, press the F.FW D/B button.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
PRIMARY SETUP  
REC/OTR  
TRACKING  
MUTE  
> SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
VOLUME BAR  
SET CLOCK  
[ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Press the PLAY/button or the STO P/button to  
choose SELECT LANGUAGE. Then, press the F.FW D/B  
button.  
SELECT LANGUAGE  
> ENGLISH  
ESPAÑOL  
ON  
SELECT KL  
TO END PRESS EXIT  
4
Press the PLAY/button or the STO P/button to select  
ENGLISH or ESPAÑO L (Spanish).  
Helpful Hint  
If you accidentally select Spanish  
and need English on-screen displays  
and menus:  
1) Press the MENU button.  
2) Press the PLAY/o button or the  
STOP/p button to select PREPARA-  
CION, then press the F.FWD/B  
button.  
5
Press the STATUS/EXIT button.  
3) Press the PLAY/o button or the  
STOP/p button to choose SELEC-  
CION IDIOMA, then press the  
F.FWD/B button.  
4) Press the PLAY/o button or the  
STOP/p button to select ENGLISH.  
5) Press the STATUS/EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Automatic Channel Setup  
Although the TV/VCR may automatically memorize the channels  
you receive when you turn it on for the first time, you may set up  
channels again by following the steps below.  
2-3  
1
Press the MENU button.  
POWER  
SLEEP/WAKE UP  
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
PLAY  
REMINDER  
REW  
F.FWD  
BRIGHTNESS  
STOP  
STATUS/EXIT  
1
1
4
7
2
3
2
CH.  
5
8
6
9
Press the PLAY/button or the STO P/button to select  
PRIM. SETUP, then press the F.FW D/B button.  
VOL  
.
SLOW  
SURF  
0
PRIMARY SETUP  
SPEED  
MEMORY PAUSE/STILL  
> SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
REC/OTR  
TRACKING  
MUTE  
VOLUME BAR  
SET CLOCK  
[ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Press the PLAY/button or the STO P/button to select  
AUTO PRO GRAMMING, then press the F.FW D/B but-  
ton. AUTO CH PROGRAMMING ... will appear on the screen.  
The TV/VCR distinguishes between TV channels and cable chan-  
nels automatically, and the TV/VCR will memorize its available  
channels.  
Wait for the TV/VCR to set up  
channels.  
4
4
W ait for a few m inutes. When setup is complete, CHANNELS  
ARE SET will appear on the screen. Then the programming of the  
lowest channel number placed in the TV/VCR’s memory will  
appear on the screen. Now, when you press the CH(annel) m/n  
button, you will scan only through channels you receive.  
Helpful Hints  
Line Input mode will always be  
stored in the TV/VCR’s memory as  
channel 00. You cannot delete it.  
You can not select AUTO PRO-  
GRAMMING at step 3 if you are in  
Line Input mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatic Channel Setup (contd) 11  
Adding/Deleting Channels  
2,4  
1
Press the MENU button.  
TO ADJUST PRESS { /  
B
POWER  
SLEEP/WAKE UP  
CH123  
SAVED  
>
CHANNEL  
SMARTLOCK  
REVIEW  
EXIT  
PRIM. SETUP  
VCR PROGRAM  
PLAY  
REW  
F.FWD  
STOP  
STATUS/EXIT  
2
5
3
1
Press the PLAY/o button or the STO P/p button to select  
CHANNEL.  
1
4
7
2
3
CH.  
5
8
6
9
TO ADJUST PRESS { /  
B
CH123  
VOL  
.
SLOW  
SURF  
SAVED  
0
>
CHANNEL  
SMARTLOCK  
REVIEW  
SPEED  
MEMORY PAUSE/STILL  
EXIT  
REC/OTR  
TRACKING  
MUTE  
PRIM. SETUP  
VCR PROGRAM  
3
Press the CH(annel) m/n button to select the channel  
you want to add or delete.  
TO ADJUST PRESS { /  
B
CH23  
SAVED  
>
CHANNEL  
SMARTLOCK  
REVIEW  
Helpful Hint  
EXIT  
PRIM. SETUP  
VCR PROGRAM  
To review the channels memorized  
by the TV/VCR, follow these steps.  
1) Press the MENU button.  
4
2) Press the PLAY/button or the  
STOP/button to select PRIM.  
SETUP. Press the F.FWD/B button.  
3) Press the PLAY/button or the  
STOP/button to select CH MEM-  
ORY REVIEW. Press the F.FWD/B  
button. A list of programmed chan-  
nels will appear on the screen.  
4) If all the programmed channels  
dont fit on the screen, press the  
F.FWD/B button. If you do not  
press the F.FWD/B button within  
10 seconds, the remaining channels  
will appear on the screen. (If there  
are no remaining channels, the pre-  
vious menu will appear.) Or press  
the REW(ind)/{ button to see the  
previous screen of channels.  
Press the F.FW D/B button or the REW (ind)/{ button to  
select SAVED (to add that channel) or DELETED (to  
delete that channel).  
Repeat steps 3-4 to add or delete other channels.  
5
Press the STATUS/EXIT button.  
Programming of the channel you added or deleted will appear.  
5) Press the STATUS/EXIT button  
once or twice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Setting the Clock  
There are three ways to set the clock: Manually, with Automatic  
PBS Channel Selection, or with Manual PBS Channel Selection.  
With manual clock setting, you tell the TV/VCR the current time.  
With Automatic or Manual PBS Channel Selection, the TV/VCR  
gets the time from your local PBS station.  
If you use either Manual PBS Channel Selection or Automatic PBS  
Channel Selection, follow the steps on page 19 to have the  
TV/VCR maintain the clock according to your Time Zone.  
Cable Box users m ust set the clock m anually.  
To set the clock manually, follow the steps on pages 12-13. To set  
the clock using Automatic PBS Channel Selection, follow the steps  
on pages 14-15. To set the clock using Manual PBS Channel  
Selection, follow the steps on pages 16-17.  
2-3  
POWER  
SLEEP/WAKE UP  
PLAY  
REW  
F.FWD  
STOP  
Before you begin, make sure:  
The TV/VCR is hooked up and turned on.  
STATUS/EXIT  
Channels are set up.  
You make each entry within 60 seconds of the previous entry.  
1
1
4
7
2
3
CH.  
5
8
6
9
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
Manual Clock Setting  
REC/OTR  
TRACKING  
MUTE  
1
Press the MENU button.  
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
PRESS  
B
REMINDER  
BRIGHTNESS  
2
Press the PLAY/button or the STO P/button to select  
PRIM. SETUP. Then, press the F.FW D/B button.  
PRIMARY SETUP  
> SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
VOLUME BAR  
SET CLOCK  
[ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Helpful Hints  
Press the PLAY/button or the STO P/button to select  
SET CLO CK. Then, press the F.FW D/B button.  
Entries that do not match the  
TV/VCR’s clock or calendar will  
cause a question mark (?) to appear  
on the screen.  
To make corrections while you are  
setting the clock, press the CLEAR  
button until the information you  
want to correct is flashing. Then  
enter the correct information.  
SET CLOCK  
> AUTO CLOCK  
SET MANUAL CLOCK  
DAYLIGHT SVG.TIME  
SET TIME ZONE  
[AUTO]  
[ON]  
[ON]  
TO CONTINUE PRESS MENU  
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Clock (contd) 13  
4
Press the PLAY/o button or the STO P/p button to select  
SET MANUAL CLO CK, then press the F.FW D/B button.  
POWER  
SLEEP/WAKE UP  
SET MANUAL CLOCK  
TIME – – : – –  
DATE – – / – – / – – – –  
PLAY  
REW  
F.FWD  
4
STOP  
TO END PRESS EXIT  
STATUS/EXIT  
7
1
4
7
2
3
CH.  
5
8
6
9
5
Press two Num ber buttons for the hour(s) and two  
Num ber buttons for the m inute(s). Then press 1 for AM  
or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
SET MANUAL CLOCK  
TIME  
09 : 30 PM  
MONTH  
– – / – – / – – – –  
TO CORRECT PRESS CLEAR  
TO END PRESS EXIT  
6
Press two Num ber buttons for the m onth, two Num ber  
buttons for the day, and two Num ber buttons for the  
year. For example, for July 1, 2000, press 07, 01, 00. The day of  
the week will appear automatically.  
5-6  
SET MANUAL CLOCK  
TIME  
09 : 30 PM  
DATE  
07 / 01 / 2000  
SATURDAY  
TO CORRECT PRESS CLEAR  
TO END PRESS EXIT  
7
Press the STATUS/EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 Setting the Clock (contd)  
Autom atic PBS Channel Selection  
1
Press the MENU button.  
2-4  
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
PRESS  
B
POWER  
SLEEP/WAKE UP  
REMINDER  
BRIGHTNESS  
PLAY  
REW  
F.FWD  
STOP  
2
STATUS/EXIT  
Press the PLAY/button or the STO P/button to select  
PRIM. SETUP. Then, press the F.FW D/B button.  
1
4
1
4
7
2
3
CH.  
PRIMARY SETUP  
5
8
6
9
> SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
VOLUME BAR  
SET CLOCK  
VOL  
.
[ON]  
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
SELECT KL CHOOSE  
B
REC/OTR  
TRACKING  
MUTE  
TO END PRESS EXIT  
3
Press the PLAY/button or the STO P/button to select  
SET CLO CK. Then, press the F.FW D/B button.  
SET CLOCK  
> AUTO CLOCK  
SET MANUAL CLOCK  
DAYLIGHT SVG.TIME  
SET TIME ZONE  
[AUTO]  
[ON]  
[ON]  
TO CONTINUE PRESS MENU  
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
4
If ON appears beside AUTO CLOCK, press the MENU  
button.  
If OFF appears beside AUTO CLOCK, press the PLAY/o  
button or the STOP/p button to select AUTO CLOCK,  
then press the F.FW D/B button so that ON appears to the  
right of AUTO CLOCK. Then, press the MENU button.  
AUTO CLOCK  
AUTO CLOCK USES  
PBS CHANNEL DATA  
>
SET PBS CH. AUTO  
SET PBS CH. MANUAL  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Clock (contd) 15  
Wait for the TV/VCR to find  
the time.  
5
6
Press the PLAY/button or the STOP/button to select  
SET PBS CH. AUTO. Then, press the F.FW D/B button.  
SET AUTO CLOCK  
TIME  
– – : – –  
POWER  
SLEEP/WAKE UP  
DATE  
– – / – – / – – – –  
NOW SEARCHING  
TO END PRESS EXIT  
PLAY  
REW  
F.FWD  
STOP  
6
STATUS/EXIT  
5
NOW SEARCHING flashes on the TV/VCR screen.  
1
4
7
2
3
7
CH.  
5
8
6
9
7
W hen the TV/VCR finds the PBS channel, the tim e will  
appear on the screen. Press the STATUS/EXIT button.  
SET AUTO CLOCK  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
TIME  
06 : 30 PM  
DATE  
07 / 01 / 2000  
SATURDAY  
TO END PRESS EXIT  
If CANNOT FIND CLOCK DATA flashes on the TV/VCR  
screen, you will be prom pted to turn off the TV/VCR.  
Turn off the TV/VCR. Leave it off for several minutes. When  
you turn on the TV/VCR again, the clock will be set.  
SET AUTO CLOCK  
TIME  
– – : – –  
DATE  
– – / – – / – – – –  
CANNOT FIND CLOCK DATA  
TO END PRESS EXIT  
Helpful Hints  
To display the time on the TV/VCR  
screen, press the STATUS/EXIT but-  
ton. Details are on page 26.  
You cannot use the AUTO CLOCK  
feature if you don’t receive a PBS  
channel that carries a time signal in  
your area. Set the clock manually.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 Setting the Clock (contd)  
Manual PBS Channel Selection  
2-4  
1
Press the MENU button.  
POWER  
SLEEP/WAKE UP  
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
PRESS  
B
PLAY  
F.FWD  
STOP  
REMINDER  
REW  
BRIGHTNESS  
STATUS/EXIT  
1
4
2
1
4
7
2
5
8
3
6
9
Press the PLAY/button or the STO P/button to select  
PRIM. SETUP. Then, press the F.FW D/B button.  
CH.  
PRIMARY SETUP  
VOL  
.
SLOW  
SURF  
0
> SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
VOLUME BAR  
SET CLOCK  
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
[ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Press the PLAY/button or the STO P/button to select  
SET CLO CK. Then, press the F.FW D/B button.  
SET CLOCK  
> AUTO CLOCK  
SET MANUAL CLOCK  
DAYLIGHT SVG.TIME  
SET TIME ZONE  
[AUTO]  
[ON]  
[ON]  
TO CONTINUE PRESS MENU  
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
4
If ON appears beside AUTO CLOCK, press the MENU  
button.  
If OFF appears beside AUTO CLOCK, press the PLAY/o  
button or the STOP/p button to select AUTO CLOCK,  
then press the F.FW D/B button so that ON appears to the  
right of AUTO CLOCK. Then, press the MENU button.  
AUTO CLOCK  
AUTO CLOCK USES  
PBS CHANNEL DATA  
>
SET PBS CH. AUTO  
SET PBS CH. MANUAL  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Clock (contd) 17  
5
Press the PLAY/button or the STO P/button to  
select SET PBS CH. MANUAL. Then, press the F.FW D/B  
button.  
Wait for the TV/VCR to  
find the time.  
7
AUTO CLOCK (PBS) CH 02  
POWER  
SLEEP/WAKE UP  
TIME  
– – : – –  
DATE  
– – / – – / – – – –  
SELECT CHANNEL NUMBER  
TO END PRESS EXIT  
PLAY  
REW  
F.FWD  
STOP  
STATUS/EXIT  
5
6
8
6
Use the Num ber buttons to select your PBS station.  
1
4
7
2
3
CH.  
AUTO CLOCK (PBS) CH 12  
5
8
6
9
TIME  
– – : – –  
DATE  
– – / – – / – – – –  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
NOW SEARCHING  
TO END PRESS EXIT  
REC/OTR  
TRACKING  
MUTE  
7
NOW SEARCHING flashes on the TV/VCR screen.  
8
W hen the TV/VCR finds the clock data, the tim e will  
appear on the screen. Press the STATUS/EXIT button.  
AUTO CLOCK (PBS) CH 12  
TIME  
06 : 30 PM  
DATE  
07 / 01 / 2000  
SATURDAY  
TO END PRESS EXIT  
If CANNO T FIND CLO CK DATA flashes on the  
TV/VCR screen and you know another PBS channel,  
press the PLAY/button or the STO P/button to  
choose SELECT NEW PBS CH. Then, press the  
F.FW D/B button. Repeat step 6.  
If CANNO T FIND CLO CK DATA flashes on the  
TV/VCR screen and you do not know another channel,  
press the PLAY/button or the STO P/button to  
select SET PBS CH. AUTO. Then, press the F.FW D/B  
button. The TV/VCR will search for the PBS channel automati-  
cally.  
• If the PBS channel is found, the time will appear on the screen.  
• If the PBS channel is not found, you will be prompted to turn  
off the TV/VCR. Leave it off for several minutes. When you turn  
on the TV/VCR again, the time will be set.  
Helpful Hints  
If you have an Antenna hookup, you  
may select channels 2-69 at step 6.  
If you have a cable connection, you  
may select channels 1-125 at step  
6. Details about available memo-  
rized channels are on page 11.  
To display the time on the TV/VCR  
screen, press the STATUS/EXIT but-  
ton. Details are on page 26.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 Daylight-Savings Time  
When the Daylight-Savings Time feature is ON, the TV/VCR clock  
will automatically move forward one hour on the first Sunday in  
April and move back one hour on the last Sunday in October.  
To turn Daylight-Savings Time ON or OFF, follow the steps  
below.  
2-4  
POWER  
SLEEP/WAKE UP  
1
Press the MENU button.  
PLAY  
REW  
F.FWD  
STOP  
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
PRESS  
B
STATUS/EXIT  
1
1
4
7
2
3
REMINDER  
5
BRIGHTNESS  
CH.  
5
8
6
9
VOL  
.
SLOW  
SURF  
0
2
SPEED  
MEMORY PAUSE/STILL  
Press the PLAY/button or the STO P/button to select  
PRIM. SETUP. Then, press the F.FW D/B button.  
REC/OTR  
TRACKING  
MUTE  
PRIMARY SETUP  
> SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
VOLUME BAR  
SET CLOCK  
[ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Press the PLAY/button or the STO P/button to select  
SET CLO CK. Then, press the F.FW D/B button.  
SET CLOCK  
> AUTO CLOCK  
SET MANUAL CLOCK  
DAYLIGHT SVG.TIME  
SET TIME ZONE  
[AUTO]  
[ON]  
[ON]  
TO CONTINUE PRESS MENU  
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
4
Press the PLAY/button or the STO P/button to select  
DAYLIGHT SVG.TIME. Then, press the F.FW D/B button  
so that O N or O FF appears beside DAYLIGHT SVG.  
TIME (Daylight Savings Tim e).  
5
Press the STATUS/EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time Zone 19  
When you set the clock using AUTO CLOCK, specify your time zone.  
The TV/VCR will maintain the clock according to your time zone.  
1
Press the MENU button.  
2-5  
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
PRESS  
B
POWER  
SLEEP/WAKE UP  
REMINDER  
BRIGHTNESS  
6
1
PLAY  
REW  
F.FWD  
2
STOP  
Press the PLAY/button or the STO P/button to select  
PRIM. SETUP. Then, press the F.FW D/B button.  
STATUS/EXIT  
PRIMARY SETUP  
1
4
7
2
3
> SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
VOLUME BAR  
SET CLOCK  
CH.  
5
8
6
9
[ON]  
VOL  
.
SLOW  
SURF  
0
SELECT KL CHOOSE  
B
SPEED  
MEMORY PAUSE/STILL  
TO END PRESS EXIT  
REC/OTR  
TRACKING  
MUTE  
3
Press the PLAY/button or the STO P/button to select  
SET CLO CK. Then, press the F.FW D/B button.  
SET CLOCK  
> AUTO CLOCK  
SET MANUAL CLOCK  
DAYLIGHT SVG.TIME  
SET TIME ZONE  
[AUTO]  
[ON]  
[ON]  
TO CONTINUE PRESS MENU  
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
4
Press the PLAY/button or the STO P/button to select  
SET TIME ZO NE. Then, press the F.FW D/B button.  
SET TIME ZONE  
> AUTO  
ATLANTIC  
[ON]  
EASTERN  
CENTRAL  
MOUNTAIN  
PACIFIC  
Helpful Hints  
ALASKA  
HAWAII  
If you select AUTO at step 5, the  
TV/VCR will set the clock according  
to the time zone data of the PBS  
station it finds.  
SELECT KL  
TO CONTINUE PRESS MENU  
You cannot select SET TIME ZONE  
at step 4 if AUTO CLOCK is set to  
OFF.  
You may need to turn off the  
TV/VCR for several minutes to  
enable the TV/VCR to reset the  
clock according to your time zone.  
5
Press the PLAY/button or the STO P/button to select  
your tim e zone.  
6
Press the MENU button, then press the STATUS/EXIT  
button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 Front Panel  
Cassette Com partm ent  
Insert a video cassette tape here.  
W ireless Rem ote Sensor  
Receives a signal from your remote control so  
you can operate the TV/VCR from a distance.  
STO P/EJECT Button  
Press once to stop the tape. When playback  
is stopped, press to eject the tape. Press to  
select an item in the menu.  
VIDEO In Jack  
Connect this jack to the video out jack of a  
camcorder or a VCR. Details are on page 31.  
AUDIO In Jack  
Connect this jack to the audio out jack of a  
camcorder or a VCR. Details are on page 31.  
EARPHO NE Jack  
STOP  
EJECT  
REW  
PLAY  
F.FWD  
REC  
OTR  
CHANNEL  
VOLUME  
POWER  
AUDIO  
VIDEO  
EARPHONE  
Connect earphones (not supplied) here for  
personal listening.  
REW (ind) Button  
VO LUME o/p  
Buttons  
Press to adjust the  
sound level.  
Press the CHANNEL  
o button and the  
VOLUME p button  
on the TV/VCR at  
the sam e tim e to  
display the pop up  
menu. Press again to  
remove the pop up  
menu.  
When tape playback is stopped, press to rewind  
the tape at high speed. During playback, press to  
rewind the tape while the picture stays on the  
screen. Press to change a setting of a pop up  
menu item (for example, to adjust the BRIGHT-  
NESS) or to return to a previous menu.  
PLAY Button  
Press to play a tape. Details are on page 28.  
Press to release Slow, Search or Still mode  
and return to normal playback. Details are on  
page 41. Press to select an item in the menu.  
F.FW D Button  
When tape playback is stopped, press to fast  
forward the tape at high speed. During play-  
back, press to fast forward the tape while the  
picture stays on the screen. Press to change a  
setting of a menu item (for example, to adjust  
the BRIGHTNESS) or to advance to the next  
menu.  
CHANNEL o/p  
Buttons  
Press to scan through  
the TV/VCR channels.  
During tape playback,  
press to adjust the  
tracking. Details are  
on page 52.  
REC(ord)/O TR Button  
Press once to start a recording. Details are on  
page 29. Press repeatedly to start a One-  
Touch Recording (an immediate timed  
recording, 30 minutes to eight hours long) of  
the channel you are watching. Details are on  
page 30.  
Press the CHANNEL  
o button and the  
VOLUME p button  
on the TV/VCR at  
the sam e tim e to  
display the pop up  
menu. Press again to  
remove the pop up  
menu.  
RECO RD Light  
This light appears during a recording. It flashes slowly when  
the TV/VCR power is turned off to set a timer recording. It  
blinks rapidly when a recording is paused or when the power  
is off for a timer recording, but there is no tape in the  
TV/VCR. It will blink rapidly two minutes before a timer  
recording is set to begin if the TV/VCR power is on.  
PO W ER Button  
Press to turn the power on or off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel 21  
ANT.  
ANT(enna) Jack  
Connect your antenna or cable here.  
Details are on page six.  
AC Power Cord  
Connect to a standard AC outlet to  
supply power to the TV/VCR.  
Antenna Hole  
Connect the stem of an indoor antenna  
here. Details are on page six.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 Remote Control Buttons  
F.FW D/B Button  
When tape playback is stopped, press to fast forward the tape at  
high speed. During tape playback, press to fast forward the tape  
while the picture stays on the screen. Details are on page 41.  
Press to change the setting of an item in the on-screen menu or  
press to proceed to the next menu.  
SLEEP/W AKE UP Button  
Press to set the Sleep Timer. Details are on page 47. Press to set  
the Wake Up Timer. Details are on page 48.  
POWER  
SLEEP/WAKE UP  
PO W ER Button  
Press to turn on or off the TV/VCR.  
PLAY/Button  
Press to play a tape. Details are on page 28. Press to release Slow,  
Search or Still mode and return to normal playback. Details are on  
page 41. Press to select an item in the menu.  
PLAY  
REW  
F.FWD  
STOP  
CLEAR Button  
STATUS/EXIT  
Press to erase incorrect data when programming TV/VCR func-  
tions. Also, press to reset the real-time counter to 0:00:00.  
Details are on page 40.  
Num ber Buttons  
Use to select channels and to program TV/VCR functions (such as  
setting the clock).  
1
4
7
2
3
CH.  
5
8
6
9
Cable Users  
Enter channel numbers as a two-digit number for the quickest  
results. For example, to select channel 6, press 0,6. If you only press  
the Number 6 button, channel 6 will be selected after a brief delay.  
(There also may be a brief delay when you select channels 10, 11,  
and 12.) If you want to select channels 100 and above, enter chan-  
nel numbers as a three-digit number. For example, to select channel  
117, press 1, 1, 7.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
Antenna Users  
Enter channel numbers as a two-digit number for the quickest  
results. You may only select channels 2-69. For example, to select  
channel 5, press 0,5. If you only press the Number 5 button, chan-  
nel 5 will be selected after a brief delay.  
SPEED Button  
Press to select the recording speed (SP or SLP).  
SURF Button  
Press to return to the TV channel you were viewing immediately  
before switching to your current channel.  
MUTE Button  
Press to eliminate the TV/VCR’s sound. Press again to return to  
the previous volume level.  
m
/
n
VO L(um e)  
Button  
m
/
n
Press to adjust the sound level. If you press the VOL(ume)  
button when the sound is muted, the sound will be restored.  
Helpful Hint  
Buttons that are shaded in the illustration light up for five seconds when you press any button on the remote  
control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Buttons (contd) 23  
STO P/Button  
Press to stop the tape. Press to select an item in the menu.  
REW (ind)/{ Button  
When tape playback is stopped, press to rewind the tape at high  
speed. During tape playback, press to rewind the tape while the  
picture stays on the screen. Details are on page 41.  
Press to change a setting of a pop up menu item or to return to a  
previous menu.  
POWER  
SLEEP/WAKE UP  
STATUS/EXIT Button  
Press to see the status display. Press again to remove the status  
display. Details are on page 26. Press to remove the menu.  
PLAY  
REW  
F.FWD  
STOP  
MENU Button  
STATUS/EXIT  
Press to display the pop up menu. You also may use the buttons  
on the front panel of the TV/VCR to access the pop up menu.  
Details are on page 20.  
1
4
7
2
3
CH(annel) m/n Button  
Press to scan through the TV/VCR’s channels.  
CH.  
5
8
6
9
SLOW Button  
During tape playback, press to view the picture in slow motion. Details  
are on page 41.  
VOL.  
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC(ord)/O TR Button  
Press once to start a recording. Details are on page 29. Or, press  
repeatedly to start a One-Touch Recording (an immediate timed  
recording, 30 minutes to eight hours long) of the channel you are  
watching. Details are on page 30.  
REC/OTR  
TRACKING  
MUTE  
MEMO RY Button  
Press to memorize a tape position at which the real-time counter  
was set to 0:00:00. Details are on page 40. Or, press to memorize  
the start and end positions on a tape when setting up A-B Repeat  
Play. Details are on pages 38-39.  
m
/
n
TRACKING  
Buttons  
Press during tape playback to adjust the tracking. Details are on  
page 52.  
PAUSE/STILL Button  
During recording, press to temporarily stop the recording. Press  
again to resume recording. Details are on page 29. You cannot  
pause a One-Touch Recording.  
During tape playback, press to freeze the picture (still). Press again  
to resume playback. Details are on page 41.  
Helpful Hint  
Buttons that are shaded in the illustration light up for five seconds when you press any button on the remote  
control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 Adjusting the Picture Controls  
Follow these steps to adjust the TV/VCR’s brightness, picture,  
color, tint, and sharpness.  
1
POWER  
SLEEP/WAKE UP  
Press the MENU button.  
TO ADJUST PRESS { /  
B
>
BRIGHTNESS  
PICTURE  
COLOR  
PLAY  
REW  
F.FWD  
TINT  
STOP  
3
SHARPNESS  
TV RESET  
2
STATUS/EXIT  
1
1
4
7
2
3
4
CH.  
5
8
6
9
2
Press the PLAY/button or the STO P/button to select  
the desired control (BRIGHTNESS, for exam ple).  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
3
Press the REW (ind)/{ button or the F.FW D/B button to  
adjust the control. (Refer to the chart on page 25.)  
4
W hen you finish, press the STATUS/EXIT button.  
Helpful Hints  
The on-screen menus shown on  
page 25 will disappear if no adjust-  
ments are made within 60 seconds.  
The original settings will probably  
give you the best picture quality.  
To reset the picture controls to the  
original settings, press the MENU  
button, then press the PLAY/but-  
ton or the STOP/button to select  
TV RESET, then press the  
F.FWD/B button. TV RESET COM-  
PLETED will appear on the screen  
briefly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Picture Controls (contd) 25  
Decrease  
decreased brightness  
decreased contrast  
paler  
Increase  
increased brightness  
increased contrast  
more brilliant  
more green  
BRIGHTNESS  
PICTURE  
CO LO R  
TINT  
SHARPNESS  
more purple  
softer  
clearer  
Press the REW(ind)/{  
button to decrease a  
picture control. Press  
the F.FWD/B button  
to increase a picture  
control.  
STOP  
EJECT  
REW  
CHANNEL  
VOLUME  
POWER  
AUDIO  
VIDEO  
EARPHONE  
TO ADJUST PRESS { /  
B
TO ADJUST PRESS { /  
B
TO ADJUST PRESS { /  
B
BRIGHTNESS  
BRIGHTNESS  
PICTURE  
COLOR  
TINT  
SHARPNESS  
TV RESET  
>
BRIGHTNESS  
PICTURE  
COLOR  
>
PICTURE  
COLOR  
TINT  
SHARPNESS  
TV RESET  
>
TINT  
SHARPNESS  
TV RESET  
TO ADJUST PRESS{ /  
B
TO ADJUST PRESS { /  
B
BRIGHTNESS  
PICTURE  
COLOR  
TINT  
SHARPNESS  
TV RESET  
BRIGHTNESS  
PICTURE  
COLOR  
TINT  
SHARPNESS  
TV RESET  
>
>
Press the STOP/▼  
button  
Press the PLAY/▲  
button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 On-Screen Status Displays  
A status display will appear when you press the STATUS/EXIT  
button or certain function buttons. The contents of the status dis-  
play will vary. To choose the status display mode, follow the steps  
below.  
If you select STATUS O N, then select CO UNTER O NLY  
O FF:  
Whenever you press the STOP/p button or the PLAY/o but-  
ton, the status display will appear for five seconds. Portions of  
the status display also may appear when you press other func-  
tion buttons.  
If you select STATUS O N, then select CO UNTER O NLY  
O N:  
Current  
Tape  
Channel  
Time  
Function  
12:00 AM  
CH10  
STOP  
Whenever you press the PLAY/o button, the status display will  
appear for five seconds. After five seconds, only the counter will  
remain on the screen. Portions of the status display also may  
appear when you press other function buttons.  
If you select STATUS O FF:  
The status display will not appear when you press function but-  
tons. You must press the STATUS/EXIT button to see the sta-  
tus display.  
SLP  
M 1:23:45  
Counter  
and  
Counter  
Memory  
Tape  
Speed  
1
Press the MENU button.  
2
Press the PLAY/button or the STO P/button to select  
VCR SETUP, then press the F.FW D/B button.  
3
Press the PLAY/button or the STO P/button to select  
O N-SCREEN MO DE, then press the F.FW D/B button.  
4
Press the PLAY/o button or the STO P/p button to select  
STATUS, then press the F.FW D/B button so that O N or  
O FF appears beside STATUS.  
ON-SCREEN MODE  
> STATUS  
[ON]  
[OFF]  
COUNTER ONLY  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
5
Helpful Hints  
If you set STATUS to O FF, go to step 6. If you set STA-  
TUS to O N, press the PLAY/o button or the STO P/p  
button to select CO UNTER O NLY, then press the  
F.FW D/B button so that O N or O FF appears beside it.  
You cannot view closed captions  
during recording or tape playback if  
COUNTER ONLY is set to ON.  
Details are on pages 50-51.  
If STATUS is set to ON, closed cap-  
tions will be interrupted when you  
insert, operate, or remove a tape.  
6
Press the STATUS/EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reminder 27  
The channel number will remain on the screen at all times when  
you set REMINDER to ON. The exception is when closed cap-  
tioning is selected.  
2-3  
Set REMINDER to ON or OFF by following the steps below.  
POWER  
SLEEP/WAKE UP  
PLAY  
1
REW  
F.FWD  
STOP  
Press the MENU button.  
STATUS/EXIT  
TO ADJUST PRESS { /  
B
1
OFF  
>
REMINDER  
BRIGHTNESS  
PICTURE  
COLOR  
1
4
7
2
3
4
CH.  
5
8
6
9
TINT  
SHARPNESS  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
2
Press the PLAY/button or the STO P/button to select  
REMINDER.  
TO ADJUST PRESS { /  
B
OFF  
>
REMINDER  
BRIGHTNESS  
PICTURE  
COLOR  
TINT  
SHARPNESS  
3
Press the REW (ind)/{ button or the F.FW D/B button to  
select O N or O FF. Each press of the REW(ind)/{ button or  
the F.FWD/B button turns REMINDER ON or OFF.  
TO ADJUST PRESS { /  
B
CH12  
ON  
>
REMINDER  
BRIGHTNESS  
PICTURE  
COLOR  
TINT  
SHARPNESS  
4
Press the STATUS/EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 Playing  
Follow the steps below to play a tape.  
Insert a tape in the TV/VCR.  
1
5
1
Press the STOP/EJECT button  
on the TV/VCR.  
Insert a tape in the TV/VCR. The power will come on. If the  
tapes record tab has been removed, playback should start auto-  
matically.  
POWER  
SLEEP/WAKE UP  
2
If playback does not start autom atically, press the  
PLAY/button to start playback.  
PLAY  
REW  
F.FWD  
2
4
STOP  
STATUS/EXIT  
3
3
1
4
7
2
3
Press the STO P/button on the rem ote control or the  
STO P/EJECT button on the TV/VCR once to stop play-  
back.  
CH.  
5
8
6
9
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
4
REC/OTR  
TRACKING  
MUTE  
Press the REW (ind)/{ button to rewind the tape.  
5
W hen the tape has finished rewinding, press the  
STO P/EJECT button on the TV/VCR to rem ove the tape.  
S-VHS Q uasi Play Back (SQ PB)  
This unit has a SQPB function that allows you to view a tape  
recorded in S-VHS format. A tape recorded in S-VHS format  
will play the same as a tape recorded in normal format. This  
unit detects whether the tape is recorded in S-VHS format or in  
normal format.  
Helpful Hints  
If the tape you want to play is  
already in the TV/VCR, turn on the  
TV/VCR power, then press the  
PLAY/button.  
Playback features and options are  
on pages 37-41.  
• When you play a tape recorded in  
S-VHS format on this unit, you can  
not get the high resolution that  
would be available on an S-VHS  
VCR. Noise lines (black and white  
streaks) may appear on the picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording 29  
Read and follow the steps below to record a TV program.  
1
Place a tape with its record tab intact (see page five) in the  
TV/VCR. The power will come on. Or, if the tape is already in  
the TV/VCR, press the POW ER button to turn on the  
TV/VCR, if necessary.  
POWER  
SLEEP/WAKE UP  
1
6
2
Press the SPEED button until the desired tape speed  
appears on the TV/VCR screen. Details about tape speed are given  
below.  
PLAY  
F.FWD  
STOP  
REW  
STATUS/EXIT  
3
1
4
7
2
5
8
3
6
9
3
5
CH.  
Use the CH(annel) m/n button or the Num ber buttons to  
select the channel to be recorded. (Channels cannot be changed  
during recording.)  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
4
2
4
Press the REC(ord)/OTR button once to start recording.  
The RECORD light will glow.  
If there is not a tape in the TV/VCR, NO CASSETTE flashes on  
the screen briefly.  
If the tape does not have a record tab, PROTECTED CASSETTE  
CANNOT RECORD flashes on the screen briefly. The TV/VCR  
will eject the tape. Insert another tape.  
5
To pause the recording (for exam ple, during com m ercials),  
press the PAUSE/STILL button. The RECORD light will flash.  
To resum e recording, press the PAUSE/STILL button again  
or the REC(ord)/OTR button. The RECORD light will glow.  
Helpful Hints  
6
You cannot record one channel  
while watching another.  
Recording options are on pages  
30-36.  
To stop recording, press the STOP/button.  
Tape Speeds  
This chart shows the recording/playback time for three types of  
video cassettes (T160, T120, and T60). There are three playback  
speeds: SP, LP, and SLP. During playback, the VCR selects the  
tape speed automatically. When recording, you can change the  
tape speed using the SPEED button. You cannot record in LP  
speed.  
You cannot record if DEFEAT  
RECORDING is set to ON. (REC  
DEFEATED will flash on the screen.)  
Details are on page 36.  
If you pause a recording for more  
than five minutes, the TV/VCR will  
switch to Stop mode automatically  
to protect the video cassette tape  
from damage.  
You can change the tape speed  
with the SPEED button while a  
recording is in progress, but some  
distortion may appear on the tape.  
Cassette type / Playback Time  
Tape Speed  
SP(Standard Play)  
T160  
2 hrs.  
40 mins.  
5 hrs.  
T120  
T60  
2 hrs.  
1 hr.  
LP(Long Play)  
(playback only)  
4 hrs.  
6 hrs.  
2 hrs.  
3 hrs.  
20 mins.  
SLP(Super Long Play)  
8 hrs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 One-Touch Recording  
The One-Touch Recording (OTR) function allows you to program  
an immediate timed recording from 30 minutes to eight hours long  
without setting the timer.  
Before you begin, make sure:  
Channels are set up.  
Press the STOP/EJECT but-  
ton on the TV/VCR to stop  
the OTR.  
4
There is a tape in the TV/VCR. The record tab must be intact.  
POWER  
SLEEP/WAKE UP  
1
Use the CH(annel) m/n button or the Num ber buttons to  
select the channel you want to record.  
PLAY  
REW  
F.FWD  
STOP  
STATUS/EXIT  
2
Press the SPEED button until the desired recording speed  
(SP or SLP) appears on the screen. Details are on page 29.  
1
4
7
2
3
CH.  
5
8
6
9
1
VOL  
.
SLOW  
SURF  
0
3
SPEED  
MEMORY PAUSE/STILL  
Press the REC(ord)/OTR button repeatedly until the desired  
recording length appears in the upper right corner of the screen.  
Recording will begin immediately. The RECORD light will appear.  
REC/OTR  
TRACKING  
MUTE  
2
3
OTR  
CH12  
LENGTH 0:30  
LENGTH  
CANCEL  
:
:
PRESS OTR  
PRESS CLEAR  
4
Helpful Hints  
To stop an OTR before recording is finished, press the  
STOP/EJECT button on the TV/VCR.  
Or, press the REC(ord)/OTR button, then press the CLEAR  
button, then press the STOP/button on the rem ote con-  
trol.  
To check the time remaining for an  
OTR after the OTR has been set,  
press the STATUS/EXIT button.  
To change the recording length  
while an OTR is in progress, press  
the REC(ord)/OTR button until the  
desired recording length appears on  
the screen.  
You can not pause an OTR.  
To cancel an OTR but continue  
recording, press the REC(ord)/OTR  
button, then press the CLEAR but-  
ton.  
You cannot record if DEFEAT  
RECORDING is set to ON. Details  
are on page 36.  
You can change the tape speed  
with the SPEED button while a  
recording is in progress, but some  
distortion may appear on the tape.  
If the end of the tape is reached  
during an OTR, the TV/VCR will  
eject the tape and turn itself off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rerecording (Tape Duplication) 31  
AUDIO and VIDEO OUT Jacks on source unit  
(VCR or Camcorder)  
AUDIO VIDEO  
STOP  
R
EJECT  
EARPHONE  
VIDEO AUDIO  
OUT  
IN  
Audio Cable (white) from  
AUDIO OUT to AUDIO In  
Video Cable (yellow) from  
VIDEO OUT to VIDEO In  
AUDIO and VIDEO In  
Jacks on TV/VCR  
1
Make the connections shown above, using audio and video  
cables. Connect the source unit (VCR or cam corder) to a  
power source after connections are m ade.  
2
The source unit will play your tape. Insert a prerecorded tape in  
the source unit. If playback begins, press the STOP button on the  
unit.  
3
The TV/VCR will record your tape. Insert a blank tape in the  
TV/VCR. Make sure the tapes record tab is intact. The TV/VCR  
power will turn on automatically.  
4
Point the TV/VCR rem ote control at the TV/VCR. Press  
Num ber buttons 0, 0 so that A/V IN appears on the screen.  
5
Helpful Hints  
Point the TV/VCR rem ote control at the TV/VCR. Press the  
SPEED button until the desired tape speed (SP or SLP)  
appears on the screen.  
• Unauthorized recording of copy-  
righted television programs, video  
tapes, or other materials may  
infringe on the rights of copyright  
owners and violate copyright laws.  
• Different brands of equipment may  
operate differently.  
• Make sure all connections are  
secure. Otherwise, you may not  
record both picture and sound.  
Audio and video cables are not  
included.  
6
Press the PLAY button on the source unit and the  
REC(ord)/OTR button on your TV/VCR at the sam e tim e.  
Copying will begin.  
7
To stop copying, press the STOP/EJECT button on the  
TV/VCR, then stop the tape on the source unit (VCR or  
cam corder).  
Programs that are copyright protect-  
ed may not record clearly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 Timer Recording  
Follow the steps below to program the TV/VCR to record TV  
programs while youre away from home. The TV/VCR will turn  
itself on, record, and turn itself off automatically. Before you begin,  
make sure:  
The clock is set. If not, CLOCK MUST BE SET appears, fol-  
lowed by the SET CLOCK menu.  
2-3  
POWER  
SLEEP/WAKE UP  
Channels are set up.  
There is a tape in the TV/VCR. (Make sure the tapes record  
tab is intact and the tape is long enough to record the pro-  
gram.)  
Com plete each step within 60 seconds of com pleting the  
previous step. If you dont, you m ay start again at step 1.  
PLAY  
F.FWD  
STOP  
REW  
STATUS/EXIT  
1
1
4
7
2
5
8
3
6
9
CH.  
1
Press the MENU button.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
REC/OTR  
TRACKING  
MUTE  
REMINDER  
BRIGHTNESS  
2
Press the PLAY/button or the STO P/button to select  
VCR PRO GRAM, then press the F.FW D/B button.  
VCR PROGRAM  
> ONCE  
DAILY(MON-FRI)  
WEEKLY  
PROGRAM REVIEW  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Helpful Hints  
Press the PLAY/button or the STO P/button to select  
a O NCE, DAILY, O R W EEKLY recording. Then, press  
the F.FW D/B button.  
• With ShowGuard, you don’t have to  
worry about losing your timer  
recordings. If the power fails, pro-  
grammed timer recordings will be  
restored when the clock is reset.  
(The clock will reset itself automati-  
cally if you are using the AUTO  
CLOCK feature. Details are on  
pages 14-17. If you are not using  
the AUTO CLOCK feature, reset the  
clock manually. Details are on  
pages 12-13.) The timer recording  
will not occur only if the timer  
recording was scheduled to take  
place during the power failure.  
You cannot set a timer recording if  
DEFEAT RECORDING is set to ON.  
Details are on page 36.  
O NCE: The TV/VCR will record a TV program on any day you  
choose, up to 12 months away.  
DAILY: The TV/VCR will record every day from Monday to  
Friday – starting at the same time and recording the same channel  
for the same length of time.  
W EEKLY: The TV/VCR will record the same channel on the  
same day, at the same time, and for the same length of time  
every week.  
DAILY PROGRAM (MON-FRI)  
PROGRAM -1 2 3 4 5 6 7 8-  
Daily  
Recording  
(exam ple)  
SELECT PROGRAM NUMBER  
TO END PRESS EXIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording (contd) 33  
4
Use the Num ber buttons (1-8) to select a position in  
which to store the tim er recording. Flashing numbers indi-  
cate an open position (one in which a timer recording has not  
been stored yet).  
4-7  
NOTE: If you select a number that already has been used to store a  
timer recording, PREVIOUSLY SET PROGRAM will appear on the screen  
for a few seconds. Then information about the program in that position  
will appear on the screen. If this happens, press the STATUS/EXIT but-  
ton. Then use the Number buttons to select another position.  
POWER  
SLEEP/WAKE UP  
PLAY  
REW  
F.FWD  
STOP  
5
STATUS/EXIT  
Use the Num ber buttons to enter the channel of the TV  
program you want to record.  
If you are recording from line input, press 0, 0. A/V IN will  
appear on the screen.  
1
4
7
2
3
CH.  
5
8
6
9
If you are recording using a Cable Box, enter the Cable Box  
output channel (03 or 04). Be sure to select the channel of the  
TV program at the Cable Box and leave the Cable Box on for  
the timer recording.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
ONE TIME PROGRAM  
PROGRAM  
1
CHANNEL – – –  
TO CORRECT PRESS CLEAR  
TO END PRESS EXIT  
6
Press two Num ber buttons for the hour(s) you want the  
recording to begin. Press two Num ber buttons for the  
m inute(s) you want the recording to begin. Press 1 for  
AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.  
ONE TIME PROGRAM  
PROGRAM  
1
CHANNEL 10  
TIME ON  
– – : – –  
TO CORRECT PRESS CLEAR  
TO END PRESS EXIT  
Helpful Hints  
7
If the numbers entered do not  
match the TV/VCR’s clock or calen-  
dar, the entry will be rejected and a  
question mark will appear on the  
screen.  
Follow the instructions in step 6 to set the recordings  
stop tim e. (AM or PM will be set automatically.)  
ONE TIME PROGRAM  
PROGRAM  
1
To make corrections while you are  
programming a timer recording,  
press the CLEAR button until the  
information you want to change is  
flashing. Then enter the correct  
information.  
CHANNEL 10  
TIME ON  
09:30 PM  
TIME OFF – – : – –  
TO CORRECT PRESS CLEAR  
TO END PRESS EXIT  
Instructions continue on page 34.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 Timer Recording (contd)  
8
11 10  
Press the Num ber 1 button to record in SP speed or  
press the Num ber 2 button to record in SLP speed. Details  
about tape speed are on page 29. You cannot use the SPEED button  
at this time.  
POWER  
SLEEP/WAKE UP  
ONE TIME PROGRAM  
PROGRAM  
1
PLAY  
REW  
F.FWD  
CHANNEL 10  
STOP  
TIME ON  
09:30 PM  
TIME OFF 11:00 PM  
REC SPEED SLP  
STATUS/EXIT  
SP=1 SLP=2  
TO CORRECT PRESS CLEAR  
TO END PRESS EXIT  
1
4
7
2
3
CH.  
5
8
6
9
8
VOL  
.
SLOW  
SURF  
0
9
9
SPEED  
MEMORY PAUSE/STILL  
Press two Num ber buttons for the m onth and two  
Num ber buttons for the day you want the program to  
record. For example, for July 10, 2000, press 07, 10. The day of  
the week and the year will be displayed automatically. (You cannot  
program the TV/VCR to record more than one year in advance.)  
If you selected a DAILY recording at step 3, you can not enter a  
date that is a Saturday or Sunday.  
REC/OTR  
TRACKING  
MUTE  
Turn off the TV/VCR  
for the recording.  
Insert a tape in  
the TV/VCR.  
ONE TIME PROGRAM  
PROGRAM  
1
CHANNEL  
TIME ON  
TIME OFF  
REC SPEED  
10  
09:30 PM  
11:00 PM  
SLP  
START DATE 07/10/2000  
MONDAY  
Leave the Cable  
Box/DBS on  
TO CORRECT PRESS CLEAR  
TO END PRESS EXIT  
(if applicable).  
10  
Press the STATUS/EXIT button. PROGRAM WAS COM-  
PLETED PLEASE TURN OFF FOR TIMER RECORDING will  
appear on the screen.  
Helpful Hints  
PROGRAM NOT COMPLETED /  
CLASH may appear on the screen  
when you finish setting a timer  
recording. This means that the timer  
recording you just programmed and  
another timer recording overlap, and  
thus the current timer recording will  
not be carried out.  
If there is not a tape in the TV/VCR, PLEASE INSERT CAS-  
SETTE also appears on the screen.  
If there is a tape without a record tab in the TV/VCR, PLEASE  
REMOVE CASSETTE also appears on the screen. If this hap-  
pens, insert a different tape.  
If PROGRAM NOT COMPLETED appears, start again at step 1.  
To stop a timer recording that is in  
progress, press the STOP/EJECT but-  
ton on the TV/VCR. To completely  
clear the timer recording so it will not  
resume when the TV/VCR power is  
turned off, see page 35.  
11  
Press the PO W ER button to turn off the TV/VCR power.  
The RECORD light will flash slowly if a tape is in the TV/VCR.  
If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR  
TIMER RECORDING appears on the TV/VCR screen two minutes  
before a timer recording is scheduled to begin.  
Please see page 54 for more  
Helpful Hints.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording (contd) 35  
Checking or Clearing Tim er Recordings  
2-4  
1
W ith the TV/VCR on, press the MENU button.  
POWER  
SLEEP/WAKE UP  
2
Press the PLAY/button or the STO P/button to select  
VCR PRO GRAM, then press the F.FW D/B button.  
PLAY  
REW  
F.FWD  
STOP  
STATUS/EXIT  
3
Press the PLAY/button or the STO P/button to select  
PRO GRAM REVIEW , then press the F.FW D/B button.  
The timer recording information for the program in the lowest  
numbered position will appear on the screen. If no timer record-  
ings are programmed, nothing will happen when you select PRO-  
GRAM REVIEW and press the F.FWD/B button.  
5
1
1
4
7
2
3
CH.  
5
8
6
9
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
4
Press the F.FW D/B button to display inform ation about  
the next program m ed tim er recording. (If you do not press  
a button within 10 seconds, information about the next pro-  
grammed timer recording will appear.) This will continue until all  
positions have been displayed. Then, the menu will disappear. You  
can exit the Program Review at any time by pressing the STA-  
TUS/EXIT button.  
5
To cancel the tim er recording displayed, press the  
CLEAR button. Either the display will disappear or information  
about other timer recordings will appear. If you do not press any  
other buttons, the display will disappear after all timer recordings  
have been displayed.  
6
Helpful Hint  
Repeat steps 1-4 to m ake sure you have cleared the cor-  
rect position.  
• With ShowGuard, you don’t have to  
worry about losing your timer  
recordings. If the power fails, pro-  
grammed timer recordings will be  
restored when the clock is reset.  
(The clock will reset itself automati-  
cally if you are using the AUTO  
CLOCK feature. Details are on  
pages 14-17. If you are not using  
the AUTO CLOCK feature, reset the  
clock manually. Details are on  
pages 12-13.) The timer recording  
will not occur only if the timer  
recording was scheduled to take  
place during the power failure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 Defeat Recording  
Follow the steps below to prevent accidental recording.  
2-3  
1
POWER  
SLEEP/WAKE UP  
Press the MENU button.  
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
PLAY  
REW  
F.FWD  
STOP  
REMINDER  
BRIGHTNESS  
STATUS/EXIT  
1
1
4
7
2
3
4
CH.  
5
8
6
9
2
Press the PLAY/button or the STO P/button to select  
VCR SETUP, then press the F.FW D/B button.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
VCR SETUP  
REC/OTR  
TRACKING  
MUTE  
> ONE TIME PLAY  
REPEAT PLAY  
[ON]  
ON-SCREEN MODE  
DEFEAT RECORDING [OFF]  
BLUE BACKGROUND [ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Press the PLAY/button or the STO P/button to select  
DEFEAT RECO RDING, then press the F.FW D/B button  
so that O N appears beside DEFEAT RECO RDING.  
VCR SETUP  
ONE TIME PLAY  
REPEAT PLAY  
[ON]  
ON-SCREEN MODE  
> DEFEAT RECORDING [ON]  
BLUE BACKGROUND [ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
Helpful Hints  
4
If you set DEFEAT RECORDING to  
ON after a timer recording has  
been set, the timer recording will  
not occur.  
You can not program a timer  
recording if DEFEAT RECORDING is  
set to ON.  
Press the STATUS/EXIT button.  
5
Now, REC DEFEATED will flash on the screen when you  
press the REC(ord)/O TR button.  
REC DEFEATED  
To set DEFEAT RECORDING to  
OFF, repeat steps 1-2 above. At  
step 3, press the PLAY/o button or  
the STOP/p button to select  
DEFEAT RECORDING, then press  
the F.FWD/B button so that OFF  
appears beside DEFEAT RECORD-  
ING. Press the STATUS/EXIT  
button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat Play 37  
Follow the steps below to program the TV/VCR to play a tape  
over and over.  
2-3  
POWER  
SLEEP/WAKE UP  
1
Press the MENU button.  
PLAY  
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
REW  
F.FWD  
STOP  
REMINDER  
STATUS/EXIT  
BRIGHTNESS  
1
1
4
7
2
3
4
CH.  
5
8
6
9
2
Press the PLAY/button or the STO P/button to select  
VCR SETUP, then press the F.FW D/B button.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
VCR SETUP  
> ONE TIME PLAY  
REPEAT PLAY  
[ON]  
ON-SCREEN MODE  
DEFEAT RECORDING [OFF]  
BLUE BACKGROUND [ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Press the PLAY/button or the STO P/button to select  
REPEAT PLAY, then press the F.FW D/B button so that  
O N appears beside REPEAT PLAY.  
VCR SETUP  
ONE TIME PLAY  
> REPEAT PLAY  
[ON]  
ON-SCREEN MODE  
DEFEAT RECORDING [OFF]  
BLUE BACKGROUND [ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
Helpful Hints  
4
Press the STATUS/EXIT button. Now, when a tape has fin-  
ished playing, the TV/VCR will rewind it and start playback again.  
(TV programming will appear while the tape is rewinding.)  
The TV/VCR will stay in Repeat Play  
mode until you set ONE TIME PLAY  
to ON, even if the TV/VCR is turned  
off. To set ONE TIME PLAY to ON,  
follow steps 1-2 above. Then, press  
the PLAY/o button or the STOP/p  
button to select ONE TIME PLAY.  
Press the F.FWD/B button so that  
ON appears beside ONE TIME  
PLAY. Then, press the STATUS/EXIT  
button.  
The real-time counter memory will  
not function during Repeat Play  
mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 A-B Repeat Play  
Follow the steps below to program the TV/VCR to play the mate-  
rial between two specified points (A and B) on a tape over and  
over again.  
Insert a tape in the TV/VCR.  
1
2
3-5  
1
POWER  
SLEEP/WAKE UP  
Insert a tape in the TV/VCR.  
PLAY  
2
REW  
F.FWD  
Press the MENU button.  
STOP  
STATUS/EXIT  
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
1
4
7
2
3
CH.  
5
8
6
9
REMINDER  
BRIGHTNESS  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
3
Press the PLAY/button or the STO P/button to select  
VCR SETUP, then press the F.FW D/B button.  
VCR SETUP  
> ONE TIME PLAY  
REPEAT PLAY  
[ON]  
ON-SCREEN MODE  
DEFEAT RECORDING [OFF]  
BLUE BACKGROUND [ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
4
Press the PLAY/button or the STO P/button to select  
REPEAT PLAY.  
VCR SETUP  
ONE TIME PLAY  
> REPEAT PLAY  
[ON]  
ON-SCREEN MODE  
DEFEAT RECORDING [OFF]  
BLUE BACKGROUND [ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
Helpful Hints  
5
To cancel A-B Repeat Play, set ONE  
TIME PLAY to ON. To set ONE TIME  
PLAY to ON, follow steps 2-3 above.  
Then, press the PLAY/o button or the  
STOP/p button to select ONE TIME  
PLAY. Press the F.FWD/B button so  
that ON appears beside ONE TIME  
PLAY. Then, press the STATUS/EXIT  
button.  
Press the F.FW D/B button repeatedly so that A-B  
appears beside REPEAT PLAY.  
VCR SETUP  
ONE TIME PLAY  
> REPEAT PLAY  
ON-SCREEN MODE  
DEFEAT RECORDING [OFF]  
BLUE BACKGROUND [ON]  
[A-B]  
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
The end position (B) must be later on  
the tape than the start position (A).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-B Repeat Play (contd) 39  
6
Press the STATUS/EXIT button to rem ove the m enu. A-B  
REPEAT will appear on the screen. Beneath it, the letter A will  
flash beside the real-time counter.  
7-8  
POWER  
SLEEP/WAKE UP  
.
PLAY  
REW  
F.FWD  
A-B REPEAT  
0:12:34  
STOP  
A
STATUS/EXIT  
1
4
7
2
3
6
9
6
7
CH.  
5
8
Play, fast forward, or rewind the tape to the position at  
which you want to begin playback. Stop the tape, then  
press the MEMO RY button to set the start position (A).  
The flashing A will become a flashing B.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
.
A-B REPEAT  
0:00:00  
B
8
Play or fast forward the tape to the position at which you  
want playback to end. Stop the tape, then press the  
MEMO RY button to set the end position (B).  
The length of time between the start position (A) and the end  
position (B) must be at least three minutes.  
9
The TV/VCR will immediately rewind the tape to the start posi-  
tion (A) and repeat playback to the end position (B) over and  
over.  
Helpful Hints  
(TV programming will appear while the tape is rewinding.)  
The counter cannot be memorized  
or reset when you are using this  
feature.  
A-B Repeat Play will be cancelled if  
you eject the tape or press the  
REC(ord)/OTR button.  
A-B REPEAT will not appear on the  
screen at step 6 if a tape is not in  
the TV/VCR. NO CASSETTE will  
flash on the screen briefly.  
You cannot rewind or fast forward  
beyond points A or B when you are  
using this feature.  
A-B Repeat Play will be retained if  
you turn off the TV/VCR power.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 Real-Time Counter Memory  
Follow the steps below to reset the real-time counter to zero at a  
tape location you want to refer to later.  
1,5  
POWER  
SLEEP/WAKE UP  
1
Play, fast forward, or rewind a tape to the location that  
you would like to refer to later. Stop the tape.  
PLAY  
REW  
F.FWD  
STOP  
2
Press the STATUS/EXIT button. The real-time counter will  
appear on the screen.  
STATUS/EXIT  
3
1
4
7
2
3
6
9
01:08 PM  
CH10  
STOP  
2
4
CH.  
5
8
VOL  
.
SLOW  
SURF  
0
SLP  
1 : 23 : 45  
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
3
W hile the counter rem ains on the screen, press the  
CLEAR button to reset the real-tim e counter to zero.  
0 : 00 : 00  
4
W hile the counter rem ains on the screen, press the MEM-  
O RY button so that M appears on the screen. To erase a  
real-time counter memory, press the MEMORY button so that the  
M disappears from the screen.  
M 0 : 00 : 00  
5
To go to a tape location where the real-tim e counter was  
reset to zero, press the REW (ind)/s button or the  
F.FW D/B button when playback is stopped. W hen the  
tape reaches the point at which the counter was set to  
zero, the tape will stop. Press the PLAY/o button to  
watch the tape.  
Helpful Hints  
The real-time counter memory will  
not function during Repeat Play  
mode. Details are on page 37.  
You may only set one real-time  
counter memory at a time. If you  
set the real-time counter to zero at  
a second location, the previous real-  
time counter to zero setting will be  
lost.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Options 41  
Forward and Reverse Searching (SP/LP/SLP)  
1
POWER  
SLEEP/WAKE UP  
During tape playback, press and release the F.FWD/B button or  
the REW(ind)/{ button. A fast forward or reverse picture search  
will begin.  
PLAY  
REW  
F.FWD  
STOP  
STATUS/EXIT  
2
To return to normal playback, press the PLAY/button.  
1
4
7
2
3
CH.  
5
8
6
9
Super High Speed Searching (LP/SLP)  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
1
REC/OTR  
TRACKING  
MUTE  
During tape playback, press the F.FWD/B button or the  
REW(ind)/{ button, then press again. The TV/VCR will now  
search in super high speed.  
2
To return to normal playback, press the PLAY/button.  
Viewing a Still Picture  
1
During tape playback, press the PAUSE/STILL button. A still pic-  
ture will appear on the screen.  
2
To release the still picture and return to normal playback, press  
the PLAY/button or press the PAUSE/STILL button again.  
Helpful Hints  
Slow and Still modes will automati-  
cally switch to Stop mode after five  
minutes to protect the TV/VCR and  
the tape from damage.  
SP/LP/SLP means this feature will  
work with tapes recorded in  
Standard Play, Long Play, or Super  
Long Play. For details about tape  
speed, see page 29.  
LP/SLP means this feature will work  
with tapes recorded in Long Play  
and Super Long Play. For details on  
tape speed, see page 29.  
Viewing a Slow Motion Picture  
1
During tape playback, press the SLOW button. The tape will play in  
slow motion.  
2
To release Slow mode and return to normal playback, press the  
PLAY/button.  
• During forward and reverse search-  
ing, horizontal noise bars will  
appear on the TV/VCR screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 SmartLock  
SmartLock enables parents to prevent their children from watch-  
ing inappropriate material on TV.  
2,4  
SmartLock reads the ratings for programming (except for news  
and sports programs, unedited movies on premium cable channels,  
and Emergency Broadcast System signals), then denies access to  
programming if the programs rating meets or exceeds the limita-  
tions you select. The ratings are defined on page 45.  
To block ratings, follow the steps below.  
POWER  
SLEEP/WAKE UP  
PLAY  
REW  
F.FWD  
STOP  
1
STATUS/EXIT  
Press the MENU button.  
1
3
1
4
7
2
3
CH.  
5
8
6
9
>
SMARTLOCK  
REVIEW  
PRESS  
B
EXIT  
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
2
Press the PLAY/button or the STO P/button to select  
SMARTLO CK. Then, press the F.FW D/B button.  
SMARTLOCK  
_ _ _ _  
Enter Your Access Code  
Helpful Hints  
3
Use the Num ber buttons to enter your access code.  
The default code is 0711. If you have not set up your personal  
access code, you should use 0711. (To set up your personal  
access code, see page 44.)  
If the “Incorrect Access Code...” mes-  
sage appears after step 3, enter the  
correct access code.  
Programming may be rated by the  
Motion Picture Association of America  
(MPAA) or according to the Television  
Parental Guidelines. In order to block  
any inappropriate programming, set  
your limits in both places (Movie  
Ratings and Parental Guidelines).  
You will complete steps 1-7 twice,  
choosing Movie Ratings at step 5 the  
first time, then choosing Parental  
Guidelines at step 5 the second time.  
You can not view tape playback if the  
rating of the tape is blocked.  
If you enter the access code once,  
you may change channels without  
seeing the “CHANNEL XX  
BLOCKED” message again. If you  
turn off the TV/VCR power, you will  
be asked for the access code again  
when you tune to a blocked channel.  
The SMARTLOCK menu will appear.  
SMARTLOCK  
X X X -  
Enter Your Access Code  
4
Press the PLAY/button or the STO P/button to select  
BLO CK. Then, press the F.FW D/B button.  
SMARTLOCK  
> BLOCK  
CHANGE CODE  
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
Download from Www.Somanuals.com. All Manuals Search And Download.  
SmartLock (contd) 43  
5-6  
5
Press the PLAY/button or the STO P/button to select  
Movie Ratings or Parental Guidelines. Then, press the  
F.FW D/B button.  
POWER  
SLEEP/WAKE UP  
BLOCK  
> Movie Ratings  
Parental Guidelines  
PLAY  
REW  
F.FWD  
STOP  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
STATUS/EXIT  
1
4
7
2
3
7
CH.  
6
5
8
6
9
Press the PLAY/button or the STO P/button to select  
the rating you want to block. Then, press the F.FW D/B  
button so that O N appears beside the rating.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
For example, if you set PG to ON, you may not view PG pro-  
gramming because the block is on. Programs with a PG or higher  
rating will be blocked. A “CHANNEL XX BLOCKED...” message  
will appear when someone tries to access such programming.  
REC/OTR  
TRACKING  
MUTE  
PARENTAL GUIDELINES  
MOVIE RATINGS  
> TV-Y  
TV-Y7  
- - - - - - - - - - - - - - - -  
TV-G  
TV-PG  
TV-14  
TV-MA  
[OFF]  
>
>G  
PG  
PG-13  
R
NC-17  
X
[OFF]  
[ON]  
[ON]  
[ON]  
[ON]  
[ON]  
[OFF]  
>
>
>
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
More specific sub-ratings are available for TV-Y7, TV-PG, TV-14,  
and TV-MA. (See example below.) When you press the  
F.FWD/B button to turn on TV-Y7, TV-PG, TV-14 or TV-MA,  
additional sub-ratings will appear.  
If you select the rating category, such as TV-PG, and turn it on  
or off, the specific sub-ratings, such as V for Violence, will turn  
on or off automatically. You can always turn specific sub-ratings  
on or off by selecting them individually. However, you may only  
set a sub-rating to ON if the rating category is set to ON.  
Ratings are defined on page 45.  
Helpful Hints  
If the “CHANNEL XX BLOCKED...”  
or “PLAYBACK BLOCKED...” mes-  
sage appears and you want to view  
this programming, enter your access  
code. The channel (or tape play-  
back) will remain blocked until you  
enter the correct code. If you do not  
know the code, you will have to  
select another channel (using the  
CH(annel) m/n buttons) or press  
the STOP/p button.  
Exam ple  
of specific  
sub-ratings  
TV-PG  
> TV-PG  
[ON]  
D
L
S
[ON]  
[ON]  
[OFF]  
[OFF]  
V
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
Ratings will remain blocked even  
after a power failure.  
You cannot access the menu when  
the “CHANNEL XX BLOCKED...” or  
“PLAYBACK BLOCKED...” message  
appears.  
7
Press the STATUS/EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44 SmartLock (contd)  
To change the access code, follow these steps.  
1
2,4  
Press the MENU button.  
POWER  
SLEEP/WAKE UP  
>
SMARTLOCK  
REVIEW  
PRESS  
B
EXIT  
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
PLAY  
REW  
F.FWD  
STOP  
STATUS/EXIT  
2
Press the PLAY/button or the STO P/button to select  
SMARTLO CK. Then, press the F.FW D/B button.  
1
5
1
4
7
2
3
6
3
CH.  
5
8
6
9
SMARTLOCK  
_ _ _ _  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
Enter Your Access Code  
REC/OTR  
TRACKING  
MUTE  
3
Use the Num ber buttons to enter your old access code.  
The default code is 0711. If you have never set up your personal  
access code, use 0711 now.  
After you enter the code, the SMARTLOCK menu will appear.  
SMARTLOCK  
X X X -  
Enter Your Access Code  
Helpful Hints  
4
In order to protect the privacy of  
the access code, an X will appear  
on the screen instead of the num-  
ber you enter.  
Press the PLAY/button or the STO P/button to select  
CHANGE CO DE. Then, press the F.FW D/B button.  
SMARTLOCK  
BLOCK  
If a “Wrong Code...” message  
appears on the screen after you  
complete step 5, you entered the  
wrong numbers in the Confirm Code  
space. Repeat the steps on this  
page.  
You cannot use the default code  
after you set up your personal  
access code.  
> CHANGE CODE  
SELECT KL CHOOSE  
TO END PRESS EXIT  
B
5
Use the Num ber buttons to enter your desired access code  
in the New Code space. Then, enter the sam e code in the  
Confirm Code space.  
If a power failure occurs, the  
default code, 0711, will be the  
active access code again.  
Your new access code should be recorded. You will return to the  
SMARTLOCK menu.  
If you connect the power cord to an  
AC outlet that is controlled by a wall  
switch, your personal access code  
will be erased every time you turn  
off the power at the wall switch.  
The default code will be the active  
code again.  
_ _ _ _  
New Code  
Confirm Code  
_ _ _ _  
6
Press the STATUS/EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SmartLock (contd) 45  
To check the SmartLock settings, follow these steps.  
1
Press the MENU button.  
POWER  
SLEEP/WAKE UP  
>
REVIEW  
PRESS  
B
EXIT  
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
PLAY  
REW  
F.FWD  
2
3
STOP  
STATUS/EXIT  
2
1
Press the PLAY/button or the STO P/button to select  
REVIEW . Then, press the F.FW D/B button so that the  
Sm artLock settings appear.  
1
4
7
2
3
CH.  
5
8
6
9
Ratings that are blocked will appear on the screen.  
An “X” will appear if a specific sub-rating is blocked, such as V for  
Violence in the TV-14 category.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
BLOCKED RATINGS  
Movie Ratings  
G
PG-13  
NC-17  
Parental Guidelines  
TV-Y7  
- - - - - - - - - - - - - - - - - - - -  
TV-G  
D
L
S
x
x
x
V
x
x
x
TV-PG  
TV-14  
TV-MA  
x
x
x
3
Press the STATUS/EXIT button.  
RATING EXPLANATIO NS  
For Movie Ratings  
• G - General Audience  
• PG - Parental Guidance suggested.  
• PG-13 - Unsuitable for children under 13  
• R - Restricted; under 17 requires accompanying parent or adult  
guardian  
• NC-17 - No one under 17 admitted  
• X - Mature audience only  
For Parental Guidelines  
• V - Violence  
• S - Sexual situations  
• L - Language  
• D - Inappropriate dialogue  
• FV - Fantasy Violence may frighten children under seven; TV-Y7  
category only. Some cartoons may have this rating.  
• TV-Y - Appropriate for all children  
• TV-Y7 - Appropriate for children seven and older  
• TV-G - General Audience  
• TV-PG - Parental Guidance suggested.  
• TV-14 - Unsuitable for children under 14  
• TV-MA - Mature audience only  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 Blue Background  
If you want the TV screen to be solid blue when a weak signal is  
received, set BLUE BACKGROUND to ON. The screen will be  
blue and the sound will be muted. Or, if you want to receive the  
weak signal, set BLUE BACKGROUND to OFF. When you select  
a channel that is receiving a weak signal, you will see and hear the  
static in the TV programming.  
2-3  
POWER  
SLEEP/WAKE UP  
To set BLUE BACKGROUND to ON or OFF, follow the steps  
below.  
PLAY  
1
REW  
F.FWD  
STOP  
Press the MENU button.  
STATUS/EXIT  
1
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
1
4
7
2
3
4
CH.  
5
8
6
9
REMINDER  
BRIGHTNESS  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
2
Press the PLAY/o button or the STO P/p button to select  
VCR SETUP, then press the F.FW D/B button.  
VCR SETUP  
> ONE TIME PLAY  
REPEAT PLAY  
[ON]  
ON-SCREEN MODE  
DEFEAT RECORDING [OFF]  
BLUE BACKGROUND [OFF]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Press the PLAY/o button or the STO P/p button to select  
BLUE BACKGRO UND. Then, press the F.FW D/B button  
repeatedly so that O FF (or O N) appears beside BLUE BACK-  
GRO UND.  
VCR SETUP  
ONE TIME PLAY  
REPEAT PLAY  
[ON]  
ON-SCREEN MODE  
DEFEAT RECORDING [OFF]  
> BLUE BACKGROUND [ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
4
Press the STATUS/EXIT button.  
Helpful Hint  
• A blue screen may appear briefly  
between channel changes if BLUE  
BACKGROUND is set to ON. To  
avoid having the brief blue screen,  
set BLUE BACKGROUND to OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sleep Timer 47  
Use the Sleep Timer to program the TV/VCR to shut off in a cer-  
tain amount of time.  
1
1
Press the SLEEP/W AKE UP button.  
TO ADJUST PRESS s/B  
POWER  
SLEEP/WAKE UP  
–TIMER–  
>
SLEEP  
WAKE UP  
ON-TIME  
OFF  
PLAY  
2
3
REW  
F.FWD  
STOP  
2
STATUS/EXIT  
o
p
Press the PLAY/ button or the STO P/ button to select  
SLEEP. Then press the REW (ind)/s button or the  
F.FW D/B button to select 30 MIN(utes), 60 MIN(utes),  
90 MIN(utes), or 120 MIN(utes). (You can not set the Sleep  
Timer during a recording.)  
1
4
7
2
3
CH.  
5
8
6
9
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
TO ADJUST PRESS s/B  
REC/OTR  
TRACKING  
MUTE  
–TIMER–  
>
SLEEP  
WAKE UP  
ON-TIME  
30 MIN  
3
Press the STATUS/EXIT button. The TV/VCR will shut itself  
off after the specified amount of time.  
One minute before the TV/VCR shuts itself off, the seconds will  
count down on the screen.  
GOOD NIGHT appears on the TV/VCR screen 10 seconds  
before the TV/VCR shuts itself off.  
Helpful Hints  
To cancel the Sleep Timer, press  
the SLEEP/WAKE UP button. Press  
the PLAY/o button or the STOP/p  
button to select SLEEP, then press  
the REW(ind)/s button or the  
F.FWD/B button to select OFF.  
Press the STATUS/EXIT button.  
To see how much time remains  
before the TV/VCR shuts itself off,  
press the SLEEP/WAKE UP button  
once. If necessary, press the  
PLAY/o button or the STOP/p but-  
ton to select SLEEP. The remaining  
time will appear beside SLEEP. To  
remove the display, press the STA-  
TUS/EXIT button.  
The Sleep Timer will be cancelled if  
you make a recording after you set  
the Sleep Timer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48 Wake Up Timer  
The Wake Up Timer turns on the TV/VCR automatically at a  
specified time within the next 24 hours. You may set the TV/VCR  
to turn on at a TV channel (the channel at which the TV/VCR was  
set last) or with VCR playback. To set the Wake Up Timer, follow  
the steps below. Before you begin:  
Make sure the clock is set. If the clock has never been set,  
CLOCK MUST BE SET will appear on the screen at step 2.  
Then the SET CLOCK menu will appear.  
2-3  
POWER  
SLEEP/WAKE UP  
5
4
1
Make sure a tape is in the TV/VCR if you want the TV/VCR to  
start tape playback at the specified time.  
Make sure no timer recordings are set for the time at which  
you want the TV/VCR power to come on.  
PLAY  
REW  
F.FWD  
STOP  
STATUS/EXIT  
1
Press the SLEEP/W AKE UP button.  
1
4
7
2
3
CH.  
5
8
6
9
TO ADJUST PRESS s/B  
–TIMER–  
>
SLEEP  
WAKE UP  
ON-TIME  
OFF  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
2
Press the PLAY/o button or the STO P/p button to select  
W AKE UP. Then, press the REW (ind)/s button or the  
F.FW D/B button to select TV O N or VCR O N.  
TO ADJUST PRESS s/B  
–TIMER–  
SLEEP  
WAKE UP  
ON-TIME  
>
TV ON  
3
o
p
s
Press the PLAY/ button or the STO P/ button to select  
O N-TIME. Then, press the REW (ind)/ button or the  
F.FW D/ button to select your desired wake up tim e.  
B
B
s
Each press of the F.FWD/ button or the REW(ind)/ button  
will increase (or decrease) the time by 10 minutes.  
TO ADJUST PRESS s/B  
–TIMER–  
SLEEP  
WAKE UP  
ON-TIME  
12:00 AM  
>
Helpful Hint  
To cancel the Wake Up Timer,  
4
press the SLEEP/WAKE UP button.  
Press the PLAY/o button or the  
STOP/p button to select WAKE  
Press the STATUS/EXIT button.  
s
UP. Then, press the REW(ind)/  
5
B
button or the F.FWD/ button to  
select OFF. Press the STATUS/EXIT  
button.  
Press the PO W ER button to turn off the TV/VCR. The  
TV/VCR will turn itself on at the specified tim e.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Volume Bar 49  
Usually, the volume bar appears when you press the VOL(ume)  
m/n button. If you do not need it, set the VOLUME BAR to OFF.  
For example, when you watch a program that is being broadcast  
with closed captions, you may choose to set the VOLUME BAR to  
OFF so the captions can remain on the screen. The captions will  
remain on the screen even when you press the VOL(ume) m/n  
button or the MUTE button.  
2-3  
POWER  
SLEEP/WAKE UP  
1
PLAY  
Press the MENU button.  
REW  
F.FWD  
STOP  
STATUS/EXIT  
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
1
4
1
4
7
2
3
CH.  
REMINDER  
5
8
6
9
BRIGHTNESS  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
2
REC/OTR  
TRACKING  
MUTE  
Press the PLAY/button or the STO P/button to select  
PRIM. SETUP. Then, press the F.FW D/B button.  
PRIMARY SETUP  
> SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
VOLUME BAR  
SET CLOCK  
[OFF]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
3
Press the PLAY/button or the STO P/button to select  
VO LUME BAR, then press the F.FW D/B button. Each  
press of the F.FWD/B button will turn the VOLUME BAR ON or  
OFF.  
PRIMARY SETUP  
SELECT LANGUAGE  
AUTO PROGRAMMING  
CH MEMORY REVIEW  
> VOLUME BAR  
SET CLOCK  
[ON]  
SELECT KL CHOOSE  
B
TO END PRESS EXIT  
4
Press the STATUS/EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50 Closed Caption  
When you watch a program that is being broadcast with closed  
captions, you can access on-screen boxes containing the pro-  
grams dialogue (for example, what a character is saying), dialogue  
in a foreign language, or information (such as a channel guide,  
schedule, or announcements). Follow the steps below to select  
closed captions.  
POWER  
SLEEP/WAKE UP  
Not all TV programs and commercials are broadcast with closed  
captions. Similarly, all types of closed captions (second language,  
half-screen text, etc.) are not always broadcast. If closed caption-  
ing is not broadcast, you cannot receive it. This does not indicate  
a problem with the TV/VCR. Refer to your areas TV program  
listings for the shows offered with closed captions.  
3
1
PLAY  
REW  
F.FWD  
STOP  
2
STATUS/EXIT  
1
4
7
2
3
CH.  
5
8
6
9
1
Press the MENU button.  
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
PRESS  
B
>
PRIM. SETUP  
VCR PROGRAM  
VCR SETUP  
CAPTION  
REC/OTR  
TRACKING  
MUTE  
REMINDER  
BRIGHTNESS  
2
Press the PLAY/button or the STO P/button to select  
CAPTIO N.  
TO ADJUST PRESS { /  
B
OFF  
>
CAPTION  
REMINDER  
BRIGHTNESS  
PICTURE  
COLOR  
TINT  
3
Press the REW (ind)/{ button or the F.FW D/B button to  
select your desired m ode.  
The selected closed caption mode will appear beside CAPTION  
on the screen.  
CAPTION1 displays standard closed captions (what a character  
is saying).  
CAPTION2 displays foreign language closed captions (foreign  
language words showing what a character is saying).  
TEXT1 and TEXT2 display half-screen text (such as a channel  
guide, schedule, or announcement).  
OFF turns closed captions off. Captions will not appear on the  
screen.  
Helpful Hint  
TO ADJUST PRESS { /  
B
Exam ple:  
CAPTIO N1  
Menu  
To cancel closed captions, follow  
steps 1-2. At step 3, press the  
REW(ind)/{ button or the  
F.FWD/B button to select OFF.  
Press the STATUS/EXIT button.  
CAPTION1  
>
CAPTION  
REMINDER  
BRIGHTNESS  
PICTURE  
COLOR  
Screen  
TINT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Closed Caption (contd) 51  
4
Press the STATUS/EXIT button. The type of closed captions  
you selected at step 3 will appear on the screen if available.  
POWER  
SLEEP/WAKE UP  
PLAY  
REW  
F.FWD  
STOP  
STATUS/EXIT  
HELLO  
1
4
7
2
3
4
CH.  
Standard Closed Captions  
5
8
6
9
VOL  
.
SLOW  
SURF  
0
SPEED  
MEMORY PAUSE/STILL  
REC/OTR  
TRACKING  
MUTE  
WORLD WEAATHER  
5 C  
8 C  
7 C  
23:00  
20:00  
4:00  
CLOUD  
RAIN  
CLOUD  
NYL  
LOS  
LONDON  
Half-screen text  
Helpful Hints  
You cannot view closed captions  
during recording or tape playback if  
COUNTER ONLY is set to ON.  
Details are on page 26.  
Abbreviations, symbols, and other  
grammatical shortcuts are often  
used in order to keep pace with the  
on-screen action. This does not indi-  
cate a problem with the TV/VCR.  
• When you change channels, the  
closed captions may be delayed for  
a few seconds.  
• When you adjust the volume or  
mute the volume, closed captions  
may be delayed for a few seconds.  
Details are on page 49.  
If STATUS is set to ON, closed cap-  
tions will be interrupted when you  
insert, operate, or remove a tape.  
Details are on page 26.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52 Automatic Operation Features  
The following playback features will always operate.  
Autom atic Playback  
When you put a tape in the TV/VCR, the power will come on  
automatically. If the tapes record tab is missing, playback will  
begin. If a timer recording is set, the power will not come on  
automatically when you insert a tape with the record tab intact. If  
a timer recording is set and the TV/VCR power is off, the  
TV/VCR will eject the tape if the record tab is missing.  
Autom atic Rewind, Eject, O ff  
When a tape is played, fast forwarded, or recorded to its end, the  
TV/VCR will rewind the tape, stop, turn itself off, and eject the  
tape. If a real-time counter memory is set, the TV/VCR may only  
rewind the tape to the point at which the real-time counter is set  
to zero. The TV/VCR will not turn itself off or eject the tape.  
Mem ory Rewind, Power O ff  
When the POWER button is pressed while the TV/VCR is rewind-  
ing a tape, REW POWER OFF will appear on the screen. The  
TV/VCR will turn itself off when the tape has finished rewinding.  
If a real-time counter memory is set, the TV/VCR may only  
rewind the tape to the point at which the counter was set to  
zero, then turn itself off.  
Tape Eject  
A tape can be ejected with the TV/VCR power on or off (but the  
TV/VCR must be plugged in). If a timer recording is programmed,  
a tape can not be ejected when the power is off. Turn on the  
TV/VCR power, then eject the tape. Be sure to insert a tape and  
turn off the TV/VCR power for the timer recording.  
Autom atic Tracking Adjustm ent  
The TV/VCR automatically adjusts the tracking to give you the  
best possible picture quality. With some recordings, however,  
you may get a better picture using the manual tracking controls  
(see below).  
Manual Tracking  
To adjust the tracking manually, press the CHANNEL o/p but-  
tons on the TV/VCR or the TRACKING m/n buttons on the  
remote control.  
Tracking returns to Automatic Tracking Adjustment when a tape  
is inserted or when the STOP/p button is pressed.  
Before  
Tracking  
Adjustment  
After  
Tracking  
Adjustment  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications 53  
General  
CRT: 19-inch in line gun  
Television system: NTSC-M  
Closed caption system: Section 15.119, FCC  
(Federal Communications Commission) Standard  
Video Heads: Four heads  
Tape width: 1/2 inch (12.65 mm)  
Tape speed  
SP: 33.35 mm/sec.  
LP: 16.67 mm/sec.  
SLP: 11.12 mm/sec.  
Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)  
Relative Humidity: 10% to 75%  
Power requirement: AC 120V, 60Hz  
Power consumption: 90W  
Sound output: 1W  
Dimensions:  
19-5/8" (H) x 19-3/8" (W) x 18-11/16" (D)  
498mm x 492mm x 474mm  
Weight: 44.1 lbs (20.0 kg)  
Tuner Broadcast Channels  
VHF 2-13, UHF 14-69  
Cable TV Channels  
1-125  
Term inals  
Antenna In: VHF/UHF 75 ohms unbalanced  
Video In: RCA connector  
Audio In: RCA connector  
Earphone: 3.5 mm CES  
Electrical Specifications  
Video input level: 0.5~2.0Vp-p  
Audio input level: -10dBv  
Video S/N ratio  
SP: More than 42dBµ  
Audio S/N ratio  
SP: More than 38dB  
Designs and specifications are subject to change without notice and without our  
legal obligation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54 Helpful Hints  
If you are having problems with your product, check this list of problems and possible solutions before  
requesting service. You may be able to solve the problem yourself.  
If you need to call a customer service representative, please know the model number and serial number of  
your product before you call. This information is displayed on the back of the product. Also, please take a  
moment to identify the problem you are having, and be prepared to explain this to the representative. If you  
believe the representative will need to help you with operations, please stay near the product. Our represen-  
tatives will be happy to assist you.  
Location  
For safe operation and satisfactory performance of your TV/VCR, remember the following:  
Shield it from direct sunlight and keep it away from sources of intense heat.  
• Avoid dusty or humid places.  
• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of  
the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.  
• Avoid locations subject to strong vibrations.  
• Do not place the TV/VCR near strong magnetic fields.  
• Do not move the TV/VCR from a cold place to a hot place, or vice versa.  
Electrical Shock and Fire Hazards  
• Do not handle the power cord with wet hands.  
• Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall out-  
let. Grasp it by the plug.  
If water is spilled on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an autho-  
rized service center.  
• Do not put your fingers or objects into the TV/VCR cassette compartment.  
• Do not place anything on top of the TV/VCR.  
Dew W arning (Moisture Condensation)  
Moisture may condense inside the unit when it is moved from a cold place to a warm place, after heating a  
cold room, or when the humidity is high. There is no warning that moisture has accumulated in your  
TV/VCR. If you try to play a tape in a TV/VCR in which moisture has accumulated, the tape and the  
TV/VCR could be damaged. If you think moisture may have accumulated inside the TV/VCR, keep the  
TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to dry.  
TV/VCR will not perform a tim er recording.  
Make sure the recording start and stop times are set correctly. Details are on pages 32-35. Midnight is 12  
a.m. Noon is 12 p.m.  
Make sure the TV/VCR power is off.  
Make sure the clock is set. Details are on pages 12-17.  
Make sure there is a tape in the TV/VCR. The tape must have a record tab.  
• With ShowGuard, you dont have to worry about losing your timer recordings. If the power fails, pro-  
grammed timer recordings will be restored when the clock is reset. (The clock will reset itself automati-  
cally if you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the  
AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not  
occur only if the timer recording was scheduled to take place during the power failure.  
Make sure DEFEAT RECORDING is set to OFF. Details are on page 36.  
TV/VCR will not record.  
Make sure the tape has a record tab. Details are on page five.  
Make sure DEFEAT RECORDING is set to OFF. Details are on page 36.  
• Plug the power cord into an active AC outlet. Details are on page seven.  
• Check your hookups. Details are on pages six-seven.  
Set up the channels. Details are on page 10.  
TV/VCR has no power.  
Make sure the power plug is completely connected to an AC (alternating current) outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Helpful Hints (contd) 55  
The rem ote control is not available, or the rem ote control will not access the pop up m enu.  
• Use the buttons on the front panel of the TV/VCR to access the pop up menu. You can not enter numbers  
(for example, to program a timer recording) using the front panel buttons. Details are on page 20.  
TV/VCR power shuts off after 15 m inutes.  
• To save energy, the TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving  
a broadcast signal (for example, a station that has gone off the air for the night). This is normal.  
Channel reception is poor.  
• Check connections, then set up the channels again. Details are on page 10.  
TV/VCR does not have a picture.  
• Adjust the antenna. Details are on page six.  
• Adjust the TV/VCR picture controls. Details are on pages 24-25.  
TV/VCR has poor sound or no sound.  
• Adjust the volume.  
• Press the MUTE button to restore the volume.  
Tape playback is poor or tape is destroyed.  
• Adjust the tracking. Details are on page 52.  
If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to  
play a tape. Details are on page 54.  
TV/VCR does not display closed captions.  
Make sure COUNTER ONLY is set to OFF. Details are on page 26.  
Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper.  
Rem ote control does not operate TV/VCR.  
• Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 20.  
• Remove all obstacles between the remote control and the TV/VCR.  
Inspect and replace the batteries in the remote control. Details are on page five.  
Num ber buttons wont work for channels above 69.  
Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel  
numbers as a three-digit number. Details are on page 22.  
If you are using an antenna, only channels 2-69 will be available.  
A tape cant be inserted into the TV/VCR.  
Insert the tape window side up, with the record tab facing you.  
Make sure a tape isnt already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.  
• Gently push on the center of the tape. Never force a tape into the TV/VCR.  
If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is  
missing.  
A tape cant be rem oved from the TV/VCR.  
Make sure the power plug is completely connected to an AC (alternating current) outlet.  
If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a  
tape and turn off the TV/VCR power for the timer recording.  
TV/VCR ejects the tape when you try to start a recording.  
Make sure the tape has a record tab. Details are on page five.  
The cylinder rotates when tape playback is stopped.  
• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The  
quick play mechanism switches the tape mechanism from Stop to Play in just one second.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56 Glossary  
AUDIO In Jack: jack located on the front of the TV/VCR which  
is used to record audio from another source.  
Autom atic Channel Setup: process in which the TV/VCR  
scans all available channels and places the ones you receive in its  
memory. Then, when you push the CH(annel) o/p buttons, you  
only scan through channels you receive.  
Bands: settings that allow you to tune channels.  
Antenna VHF (very high frequency; channels  
2-13) and UHF (ultra high frequency; channels  
14-69).  
Cable – all standard channels can be received without a Cable  
Box.  
Brightness: adjusting increases or decreases the brightness of  
the color on the screen.  
Color: adjusting pales or brightens the TV/VCR color.  
Dubbing: copying a tape using a VCR.  
HQ : high quality; a feature in the TV/VCR circuitry which pro-  
vides enhanced picture detail.  
Line Input: The channel to which you set your TV/VCR during  
dubbing. The line input channel is always channel 00 (A/V IN).  
Mode: a TV/VCR operation.  
O TR: One-Touch Recording; a timed recording that starts  
immediately and records for 30 minutes to eight hours, whichev-  
er you specify.  
Picture: adjusting increases or decreases the contrast of the pic-  
ture on the screen.  
Sharpness: adjusting softens or clarifies the picture on the screen.  
Tape Speeds: how fast the tape travels during playback or  
recording.  
SP (standard play) – fastest tape speed (recording time for a  
T120 tape is approximately two hours); best picture quality.  
LP (long play) – average tape speed; playback only.  
SLP (super long play) – slowest tape speed (recording time for  
a T120 tape is approximately six hours).  
Tint: adjusting changes the tints of the picture on the TV/VCR  
from purple to green.  
VIDEO In Jack: jack located on the front of the TV/VCR which  
is used to record video from another source.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty 57  
TV/VCR COMBINATION  
90 Days Free Labor/One Year Free Parts Exchange (Two Years Free Exchange on Color Picture Tube)  
This product must be carried in for repair.  
WHO IS COVERED?  
uct, the local Philips service organization will attempt  
You must have proof of purchase to receive warranty to provide service (although there may be a delay if  
service. A sales receipt or other document showing  
that you purchased the product is considered proof  
of purchase.  
the appropriate spare parts and technical manual(s)  
are not readily available).  
MAKE SURE YOU KEEP...  
WHAT IS COVERED?  
Please keep your sales receipt or other document  
showing proof of purchase. Attach it to this owners  
manual and keep both nearby. Also keep the original  
box and packing material in case you need to return  
your product.  
Warranty coverage begins the day you buy your  
product. For 90 days thereafter, all parts will be  
repaired or replaced, and labor is free. From 90 days  
to one year from the day of purchase, all parts will be  
repaired or replaced, but you pay for all labor  
charges. From one to two years from the day of pur-  
chase, you pay for the replacement or repair of all  
parts except the picture tube, and for all labor  
charges. After two years from the day of purchase, you  
pay for the replacement or repair of all parts, and for  
all labor charges.  
BEFORE REQUESTING SERVICE...  
Please check your owners manual before requesting  
service. Adjustments of the controls discussed there  
may save you a service call.  
TO GET WARRANTY SERVICE IN U.S.A., PUER-  
TO RICO OR U.S. VIRGIN ISLANDS...  
Take the product to a Philips factory service center  
(see enclosed list) or authorized service center for  
repair. When the product has been repaired, you  
must pick up the unit at the center. Centers may  
keep defective parts.  
All parts, including repaired and replaced parts, are  
covered only for the original warranty period. When  
the warranty on the product expires, the warranty on  
all replaced and repaired parts also expires.  
WHAT IS EXCLUDED?  
Your warranty does not cover:  
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all  
implied warranties, including implied warranties of  
merchantability and fitness for a particular purpose,  
are limited in duration to the duration of this express  
warranty. But, because some states do not allow limi-  
tations on how long an implied warranty may last, this  
limitation may not apply to you.)  
• labor charges for installation or setup of the prod-  
uct, adjustment of customer controls on the prod-  
uct, and installation or repair of antenna systems  
outside of the product.  
• product repair and/or part replacement because of  
misuse, accident, unauthorized repair or other  
cause not within the control of Philips Consumer  
Electronics.  
• reception problems caused by signal conditions or  
cable or antenna systems outside the unit.  
• a product that requires modification or adaptation  
to enable it to operate in any country other than  
the country for which it was designed, manufac-  
tured, approved and/or authorized, or repair of  
products damaged by these modifications.  
• incidental or consequential damages resulting from  
the product. (Some states do not allow the exclu-  
sion of incidental or consequential damages, so the  
above exclusion may not apply to you. This  
includes, but is not limited to, prerecorded materi-  
al, whether copyrighted or not copyrighted.)  
• damage caused by the use of non-VHS tapes or  
tapes that have not been tested and labeled for  
use in two, four, six, and eight hour VHS  
recorders.  
TO GET WARRANTY SERVICE IN CANADA...  
Please contact Philips at:  
1-800-661-6162 (French Speaking)  
1-800-363-7278 (English Speaking)  
(In Canada, this warranty is given in lieu of all other  
warranties. No other warranties are expressed or  
implied, including any implied warranties of mer-  
chantability or fitness for a particular purpose. Philips  
is not liable under any circumstances for any direct,  
indirect, special, incidental or consequential damages,  
howsoever incurred, even if notified of the possibility  
of such damages.)  
REMEMBER...  
Please record below the model and serial numbers  
found on the product. Also, please fill out and mail  
your warranty registration card promptly. It will be  
easier for us to notify you if necessary.  
• a product that is used for commercial or institu-  
tional purposes.  
MODEL # __________________________________  
SERIAL # __________________________________  
WHERE IS SERVICE AVAILABLE?  
Warranty service is available in all countries where  
the product is officially distributed by Philips  
Consumer Electronics. In countries where Philips  
Consumer Electronics does not distribute the prod-  
This warranty gives you specific legal rights. You may have  
other rights which vary from state to state.  
Philips Service Solutions Group, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800  
EL4963E006 / MAC 6108/ 3-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58 Index  
a-b repeat play . . . . . . . . .38-39  
accessories . . . . . . . . . . . . . . .60  
ant(enna) jack . . . . . . . . . . .6, 21  
audio in jack . . . . . . . . .7, 20, 31  
automatic  
memory  
button . . . . . . . . . . .23, 39-40  
real-time counter . . . . . . . .40  
rewind, power off . . . . . . .52  
menu  
button . . . . . . . . . . . . . . . .23  
front panel button access . .20  
mute button . . . . . . . . . . . . . .22  
smartclock . . . . . . . . . . . . .14-17  
smartlock . . . . . . . . . . . . .42-45  
sp . . . . . . . . . . . . . . . . . .29, 56  
specifications . . . . . . . . . . . . .53  
sqpb . . . . . . . . . . . . . . . . . . . .28  
standard play . . . . . . . . . .29, 56  
status display . . . . . . . . . . . . .26  
status/exit button . . . . . . .23, 26  
still picture . . . . . . . . . . . . . . .41  
stop/p button . . . . . . . . . . . .23  
stop/eject button . . . . . . . . . .20  
super high speed searching . . .41  
super long play . . . . . . . . .29, 56  
surf button . . . . . . . . . . . . . . .22  
playback . . . . . . . . . . . . . . .52  
rewind . . . . . . . . . . . . . . . .52  
batteries . . . . . . . . . . . . . . . . . .5  
blue background . . . . . . . . . . .46  
brightness, adjusting . . . . .24-25  
number buttons . . . . . . . . . . .22  
one-touch recording . . . . . . . .30  
channel  
above 100 . . . . . . . . . . . . .22  
adding . . . . . . . . . . . . . . . .11  
buttons . . . . . . . . . .20, 23, 52  
deleting . . . . . . . . . . . . . . .11  
reviewing . . . . . . . . . . . . . .11  
setup . . . . . . . . . . . . . . . . .10  
clear button . . . . . . . . . . . . . .22  
clock . . . . . . . . . . . . . . . . .12-17  
closed caption system . . . .50-51  
color, adjusting . . . . . . . . .24-25  
connections . . . . . . . . . . .6-7, 31  
contents, table of . . . . . . . . . . .4  
controls  
pause/still button . . . . . . .23, 41  
picture, adjusting . . . . . . . .24-25  
play button . . . . . . . . . . . .20, 22  
playback options . . . . . . . . . . .41  
playing . . . . . . . . . . . . . . . . . .28  
power  
table of contents . . . . . . . . . . .4  
tape  
duplication . . . . . . . . . . . . .31  
eject . . . . . . . . . . . . . . . . . .20  
speed . . . . . . . . . . . . . .29, 56  
time  
setting . . . . . . . . . . . . . .12-17  
zone . . . . . . . . . . . . . . . . . .19  
timer recording  
cancelling . . . . . . . . . . . . . .35  
reviewing . . . . . . . . . . . . . .35  
setting . . . . . . . . . . . . . .32-34  
tint, adjusting . . . . . . . . . . .24-25  
tracking . . . . . . . . . . . . . . . . .52  
button . . . . . . . . . . . . .20, 22  
cord . . . . . . . . . . . . . . . .7, 21  
real-time counter memory . . .40  
rear panel . . . . . . . . . . . . . . . .21  
rec/otr button . . . . . . . . .20, 23  
record light . . . . . . . . . . . . . .20  
recording . . . . . . . . . . . . . . . .29  
recording prevention . . . . . . . .5  
reminder . . . . . . . . . . . . . . . .27  
remote  
remote . . . . . . . . . . . . .22-23  
tv/vcr . . . . . . . . . . . . . . . . .20  
counter only mode . . . . . . . . .26  
daylight-savings time . . . . . . . .18  
defeat recording . . . . . . . . . . .36  
duplication . . . . . . . . . . . . . . .31  
control  
video in jack . . . . . . . . .7, 20, 31  
volume bar . . . . . . . . . . . . . . .49  
buttons . . . . . . . . . .22-23  
using . . . . . . . . . . . . . . . .5  
sensor . . . . . . . . . . . . . . . .20  
repeat play . . . . . . . . . . . . . . .37  
rerecording . . . . . . . . . . . . . .31  
rew(ind) button . . . . . . . . . . .20  
rew(ind)/{ button . . . . . .23, 41  
rewinding . . . . . . . . . . . . . . . .41  
wake up timer . . . . . . . . . . . .48  
warranty . . . . . . . . . . . . . . . . .57  
earphone jack . . . . . . . . . . . . .20  
fast forward search . . . . . . . . .41  
f.fwd/B button . . . . . . . . .22, 41  
f.fwd button . . . . . . . . . . . . . .20  
front panel . . . . . . . . . . . . . . .20  
safety precautions . . . . . . . . . .3  
searching . . . . . . . . . . . . . . . .41  
sensor (remote) . . . . . . . . . . .20  
sharpness, adjusting . . . . . .24-25  
showguard . . . . . . . . .32, 35, 54  
sleep timer . . . . . . . . . . . . . . .47  
slow  
button . . . . . . . . . . . . .23, 41  
motion playback . . . . . . . . .41  
slp . . . . . . . . . . . . . . . . . .29, 56  
glossary . . . . . . . . . . . . . . . . .56  
helpful hints . . . . . . . . . . . .54-55  
hookups . . . . . . . . . . . . .6-7, 31  
language selection . . . . . . . . . . .9  
line input mode . . . . . .10, 31, 56  
long play . . . . . . . . . . . . . .29, 56  
lp . . . . . . . . . . . . . . . . . .29, 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUPPLIED ACCESSO RIES  
The following items are supplied with your TV/VCR; they  
are provided to help you use or set up your TV/VCR.  
POWER  
SLEEP/WAKE UP  
REW  
PLAY  
MENU  
STOP  
F.FWD  
STATUS/E
1
CLEAR  
2
4
0
3
5
7
6
SLOW  
SPEED  
8
CH  
9
MEMORY  
REC/OTR  
SURF  
PAUSE/STILL  
VOL  
TRACKING  
MUTE  
Remote Control 4835 218 37289  
Two AA Batteries 4835 138 17012  
O PTIO NAL ACCESSO RIES  
The following additional items are not provided with your  
TV/VCR, but they are designed for use with your new TV/VCR.  
To order these optional accessories, contact us at:  
Philips Parts & Accessories Marketing Department  
401 East Old Andrew Johnson Highway  
P.O. Box 555  
Jefferson City, TN 37760  
1-800-851-8885.  
Monaural Audio and Video Cables (6 feet)  
VHS Cassette Rewinder  
#M61117  
Color-coded for easy connection  
#M61103  
Three Cassette Storage Cases (plastic)  
Fits VHS and Beta cassettes  
#M61104  
Six High-grade, VHS, T-120 Cassettes  
#MHG1206  
This owners manual is made of recyclable materials.  
Remember to recycle!  
As an ENERGY STAR® Partner, Philips Consumer Electronics  
IB8228E001  
Printed In Mexico  
0EMN01681 / T7163UP * * * * *  
has determined that this product meets the  
ENERGY STAR® guidelines for energy efficiency.  
ENERGY STAR® is a U.S. registered mark.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Plumbing Product K28H35000099 User Manual
LaCie Blu ray Player Slim Blu ray User Manual
LG Electronics Car Satellite TV System 42LA86 User Manual
LG Electronics Clothes Dryer DLEC733 User Manual
Linksys Network Card USBBT100 User Manual
LOREX Technology Home Security System L19lD1616501 User Manual
Makita Computer Monitor 6347DWDE User Manual
Maytag Dishwasher W10199658A User Manual
Maytag Washer 22003351 User Manual
MidiLand Speaker System S4 3050M User Manual