Magnavox TV VCR Combo 19MDTR20 User Manual

19MDTR20(1-49).QX33 03.3.28 11:52 Page 1

OWNER’S MANUAL

19MDTR20/27MDTR20

COLOR TV WITH BUILT-IN VCR

AND DVD PLAYER

NEED HELP? CALL US!

M^{AGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY}

^{QUESTIONS ABOUT YOUR NEW PRODUCT}. WE CAN GUIDE YOU THROUGH

C^ONNECTIONS, F^IRST-TIME SETUP,AND ANY OF THE FEATURES.

W^{E WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY}.

C^{ALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT}.

1-800-705-2000

OR VISIT US ON THE WEB AT WWW.MAGNAVOX.COM

IMPORTANT!

RETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS.

SEE WHY INSIDE.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 3

Safety and General Information 3

Safety Precautions

Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

Federal Communications Commission (FCC) Warning: Any unauthorized changes or

modifications to this equipment void the user’s authority to operate it.

Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover or

attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.

DO NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM.

Special Information for Canadian Users: This Class B digital apparatus complies with Canadian

ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio/TV Interference: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and the receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

are prohibited. This product incorporates copyright protection technology that is protected by method claims

of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation

and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

Note to the Cable TV System Installer: This reminder calls the Cable TV system installer’s

attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding –

in particular, specifying that the cable ground shall be connected to the grounding system of the building, as

close to the point of cable entry as possible.

Declaration of Conformity

Model Number:

Trade Name:

19MDTR20/27MDTR20

Magnavox

Responsible Party: Philips Consumer Electronics

P.O. Box 14810

Knoxville, TN 37914-1810

(865) 521-4316

As an ENERGY STAR^®Partner, Magnavox has determined that this product meets the ENERGY STAR^®guidelines for ener-

gy efficiency. ENERGY STAR^®is a U.S. registered mark. Using products with the ENERGY STAR^®label can save energy.

Saving energy reduces air pollution and lowers utility bills.

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 4

4 Table of Contents

General Information

Disc Features

Safety and General Information . . . . . . . . . . . . . . . .3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . .4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Playable Discs and Videotapes . . . . . . . . . . . . . . . . .6

Disc Menus, Title Menus . . . . . . . . . . . . . . . . . .51

Fast Forward/Reverse Search . . . . . . . . . . . . . . .52

Title/Chapter Playback, Time Playback . . . . . . . .53

Track Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Paused and Step-by-Step Play,

First-Time Setup and Use

Resume On . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Repeat Play, A-B Repeat Play . . . . . . . . . . . . . . .56

Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Subtitles, Camera Angles . . . . . . . . . . . . . . . . . .58

Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . . .59

Parental Password . . . . . . . . . . . . . . . . . . . . .60-61

Parental Levels . . . . . . . . . . . . . . . . . . . . . . .62-63

Audio Language, Stereo Sound . . . . . . . . . . . . . .64

Random Play, Programmed Play . . . . . . . . . . . . .65

MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . . . .66

MP3/JPEG Displays . . . . . . . . . . . . . . . . . . . . . . .67

Before Using the TV/VCR/DVD . . . . . . . . . . . . . . .7

Hooking Up the TV/VCR/DVD . . . . . . . . . . . . . .8-9

Optional Connections . . . . . . . . . . . . . . . . . . . . . .10

First-Time Setup, Watching TV . . . . . . . . . . . . . . .11

Playing a Videotape . . . . . . . . . . . . . . . . . . . . . . . .12

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Description of Controls

Remote Control Buttons . . . . . . . . . . . . . . . . .14-15

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TV Settings

DVD Setup Features

Menu Language, ResettingTV Channels . . . . . . . . .18

Adding/Deleting Channels . . . . . . . . . . . . . . . . . . .19

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . .20-23

Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . .24

Status Displays, Picture Controls . . . . . . . . . . . . .25

Language Settings . . . . . . . . . . . . . . . . . . . . . .68-69

Display Settings . . . . . . . . . . . . . . . . . . . . . . .70-71

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .72

On-Screen Displays . . . . . . . . . . . . . . . . . . . . . .73

Black Level, Virtual Surround . . . . . . . . . . . . . . .74

Recording

Information You May Need

Videotape Recording . . . . . . . . . . . . . . . . . . . . . . .26

One-Touch Recording . . . . . . . . . . . . . . . . . . . . .27

Timer Recording . . . . . . . . . . . . . . . . . . . . . . .28-31

Timer Recording Auto Return . . . . . . . . . . . . . . .32

Rerecording (Tape Duplication) . . . . . . . . . . . . . .33

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . .76-77

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . .79

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Videotape Features

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Rental Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Zero Return, Sleep Timer . . . . . . . . . . . . . . . . . .36

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Videotape Playback Features . . . . . . . . . . . . . . . . .39

Automatic Operation Features . . . . . . . . . . . . . .40

Additional TV Features

Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . .41

Setting V-Chip . . . . . . . . . . . . . . . . . . . . . . . . .42-47

Multi-Channel Television Sound . . . . . . . . . . . .48-50

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 5

Introduction 5

Welcome to your TV/VCR/DVD owner’s manual.

This manual describes the 19MDTR20 and 27MDTR20. These two models are different

sizes, but they operate identically. The 27MDTR20 is illustrated in this manual.

Features - TV/VCR

• Automatic Channel Setup

• Automatic Head Cleaner

• Automatic Tracking Adjustment

• Closed Captions

• One-Touch Recording

• Real-Time Videotape Counter

• Rental Play

• Repeat Play

• Daylight-Savings Time

• Sleep Timer

• English, Spanish, or French Setup Menus • Time Search

• Forward/Reverse Searching; Still

• High Quality (HQ) System

• Index Search

• Timer Recording

• V-Chip (Parental Controls)

• Zero Return

Features - Discs

• Audio Language choices*

• Random Play

• Bit Rate display

(Audio CD, MP3)

• Camera Angle*

• Repeat (A-B, Chapter, Title, Track, Disc)

• Search (Title/Chapter, Time, Track)

• Subtitles*

• Virtual Surround

• Zoomed Play

• Dolby Digital Sound*

• Dynamic Range Control

• Fast/Paused/Slow/Step-by-Step Playback

• Markers

• Parental Controls*

• Programmed Play

(Audio CD, MP3)

* If available on the Disc

DVD Disc Menus...

Some explanations in this manual describe DVD Disc menus. DVD manufacturers set

the menus, which vary among DVDs. All DVDs do not have menus. If the DVD has a

menu, access it by pressing the DISC MENU button on the remote control.

Details are on page 51.

Setup Menus...

Some instructions explain how to use the setup menus of the TV/VCR/DVD. There are

two setup menus: one for the TV/VCR features while the unit is in TV/VCR mode, and

one for the Disc features while the unit is in DVD mode. Access the setup menus by

pressing SETUP on the remote control.

While in TV/VCR mode, you can select only the TV/VCR SETUP menu.

In DVD mode, you can select both the TV/VCR SETUP menu and the SETUP menu for

the unit’s DVD Player. Press the SETUP button once to select the TV/VCR SETUP

menu. Press SETUP twice to get to the DVD Player’s SETUP menu.

Even if you set a DVD feature in the unit’s SETUP menu, it will not be available if the

current Disc does not include that feature.

Available Disc Features...

All features described in this manual are not available on every Disc. If

the feature is not available on the Disc, you cannot use the

TV/VCR/DVD to make it available.

An “X” will appear in the top right corner of the screen if you try to

access a feature that is not available.

For example, some features are available only during play, while others

are available only if play is stopped. If you cannot access a feature, try

stopping or starting play, then try the feature again.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 6

6 Playable Discs and Videotapes

Playable Discs

The DVD Player of this TV/VCR/DVD will play many types of Discs, including Digital

Video Discs (DVDs) and Audio Compact Discs (CDs). It will play MP3 and JPEG files as

well.

To play a DVD, make sure it meets the requirements for Region Codes and Color

Systems as described below. Discs that have the following logos will play on the DVD

Player of this TV/VCR/DVD. Finalize CD-R, CD-RW, DVD+R, and DVD+RW Discs

before playing them in the TV/VCR/DVD.

DVD: Prerecorded Digital

Video Discs

CD-R: Compact Disc

Recordable. CD-Rs can be

recorded on only once.

Recordable

Audio CDs

DVD+R: DVD Recordable.

DVD+Rs can be recorded

on only once.

MP3: Digital audio files

recorded on a CD-R or

CD-RW

DVD+RW: DVD Rewritable.

DVD+RWs can be recorded

on multiple times.

CD-RW: Compact Disc

Rewritable. CD-RWs can be

recorded on multiple times.

ReWritable

Region Codes

This TV/VCR/DVD has a Region One (1) DVD Player. DVDs must be labeled for ALL

regions or for Region 1 in order to play on the unit. You cannot play DVDs that are

labeled for other regions. Look for the symbols below on your DVDs. If these region

symbols do not appear on your DVD, you cannot play the DVD in this TV/VCR/DVD.

The number inside the globe refers to a region of the world. Region 1 represents the

United States, Canada, upper regions of North America, Bermuda, the U.S. Virgin

Islands, and small regions near Australia.

A DVD labelled for a specific region can only play on DVD Players with the same

region code.

Color Systems

DVDs are recorded in different color systems throughout the world. The most com-

mon color systems are NTSC (which is used primarily in the United States and

North America), PAL, and SECAM.

The DVD Player of this unit uses NTSC, so DVDs you play must be recorded in the

NTSC color system. You cannot play DVDs recorded in other formats. The color

system of the DVD may be listed on the DVD or on the Disc case.

Videotapes

Magnavox recommends you use only videotapes that have the

mark. Other

videotapes may have poor picture quality and cause excessive deposits on the video

heads. The warranty may not cover such damage.

The VCR of this TV/VCR/DVD has a High Quality (HQ) system and is compatible

with existing Video Home System (VHS) equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 7

Before Using theTV/VCR/DVD 7

Remote Control Battery Installation

Remove the battery compartment lid on the

bottom of the remote control. Slide the lid down and

off. Follow the direction of the arrow on the lid.

Place two AA batteries inside the battery com-

partment. Align the and ends as indicated.

–

Replace the battery compartment lid.

1 2 3

Battery Safety

Battery Usage CAUTION - To prevent battery leakage that

may result in bodily injury, property damage, or damage to

the unit:

G Install ALL batteries correctly, with the + and - markings

on the battery aligned as indicated on the unit;

G Do not mix batteries, for example, old with new or carbon

with alkaline; and

G Remove batteries when the unit will not be used for a long

time.

Recording Prevention

Videotapes have record tabs to ensure you do not erase

recordings accidentally.

To prevent accidental recording, break off the

tab with a screwdriver.

To record again, cover the hole with cello-

phane tape.

1 2

Using the Remote Control

G Point the remote control at the remote sensor on the

front of the TV/VCR/DVD. Details are on page 16.

G Do not put objects between the remote control and the

TV/VCR/DVD.

Helpful Hint

• Your new product, its packaging,

and this manual contain materials

that can be recycled and reused.

Specialized companies can recycle

your product to increase the

amount of reusable materials and

to minimize the amount that

needs to be properly disposed.

Your product uses batteries that

should not be thrown away when

depleted but should be disposed

of as small chemical waste.

Please find out about the local

regulations on disposal of your old

product, batteries, manual, and

packaging when you replace exist-

ing equipment.

TV/VCR/DVD Maintenance

G Remove any light adhesive stick-on notes from the video

cassette before putting the cassette in the TV/VCR/DVD.

Removable labels can jam the TV/VCR/DVD.

G The TV/VCR/DVD requires periodic maintenance to main-

tain its excellent performance. This TV/VCR/DVD has an

internal head cleaning system. However, the video heads

will eventually require cleaning or replacement. Only an

authorized service center should perform this service.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 8

8 Hooking Up theTV/VCR/DVD

Hook up your TV/VCR/DVD using

one of the connections shown.

Connect a Cable TV

signal or an antenna to

the ANT(enna) Jack.

Hooking Up Your TV/VCR/DVD

with a Cable TV Signal or

Outdoor Antenna

ANT.

AUDIO OUT

ANT.

COAXIAL

Hooking Up Your TV/VCR/DVD

Connect the Cable TV

with a Cable Box/Satellite Receiver

or Satellite signal to the

IN Jack on the Cable

Box/Satellite Receiver.

To view any channel, set the TV/VCR/DVD to

the output channel (channel 03 or 04) of the

Cable Box/Satellite Receiver. Then, select chan-

nels at the Cable Box/Satellite Receiver.

OUT

Connect an RF

coaxial cable

(not supplied) to

the OUT Jack

on the Cable

Box/ Satellite

Receiver and to

the ANT(enna)

Jack on the

TV/VCR/DVD.

ANT.

AUDIO OUT

COAXIAL

Your Cable Box/Satellite Receiver may have Audio and Video Out jacks instead of the single

Antenna Out jack (RF coaxial or 75 ohm) shown here.

If so, connect Audio and Video cables to the Audio/Video Out jacks of the Cable Box/Satellite

Receiver and to the AUDIO/VIDEO In jacks on the front of the TV/VCR/DVD.

Press SELECT on the remote to set the TV/VCR/DVD to AUX, not channel 3 or 4. Select chan-

nels you want to watch or record at the Cable Box/Satellite Receiver as usual, leaving the

TV/VCR/DVD on AUX.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 9

Hooking Up theTV/VCR/DVD (cont’d) 9

Hooking Up Your TV/VCR/DVD

with an Indoor Antenna

Indoor Antenna

(not supplied,

example only)

To install an indoor antenna or “rabbit ears”

(not supplied), connect the antenna wire to the

ANT(enna) Jack on the back of the

TV/VCR/DVD as shown. Extend the antenna

and adjust its length, direction, and angle for

the clearest picture.

ANT.

AUDIO OUT

ANT.

COAXIAL

Hooking Up Your TV/VCR/DVD to

Another Video Source

(VCR, DVD Player, Camcorder, etc.)

You may need this connection if you want to

play Discs or tapes on other equipment but

watch them on the TV/VCR/DVD. Press

SELECT on the remote to select AUX at the

TV/VCR/DVD. When you play the materials on

the other equipment, it will show on the

TV/VCR/DVD’s AUX channel. More details are

on page 33.

Audio and video cables are not supplied.

AUDIO/VIDEO OUT

Connect audio cables to the

AUDIO OUT Jacks on the

VCR and to the red and

Jacks on VCR

(example only)

white AUDIO In Jacks on the

front of the TV/VCR/DVD.

HEADPHONE VIDEO

3CH

4CH

AUDIO VIDEO

ANT.

OUT

AUDIO

STANDBY-ON

SELECT

VOLUME

PLAY

STOP

OPEN/CLOSE

CHANNEL

REC/OTR

REW

PLAY

F.FWD

STOP/EJECT

AUDIO

TV/VCR

AUDIO/VIDEO In

Jacks on front of

TV/VCR/DVD

3CH

4CH

AUDIO VIDEO

ANT.

OUT

Connect a Video cable to the

VIDEO OUT Jack on the VCR

and to the yellow VIDEO In Jack

on the front of the TV/VCR/DVD.

When all other connections are

complete, plug in the

TV/VCR/DVD’s power cord.

Before you turn on the

TV/VCR/DVD, go to page 11.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 10

10 Optional Connections

Analog Stereo Hookups

If you want to hear the TV/VCR/DVD sound

through a stereo instead, make this connection.

Audio cables

to red and

white AUDIO

OUT jacks on

TV/VCR/DVD

Complete the antenna/Cable TV

connections. Details are on pages eight-

nine.

ANT.

AUDIO OUT

Connect red and white audio

COAXIAL

cables to the red and white AUDIO

OUT jacks on the back of the

AUDIO OUT

TV/VCR/DVD and to the AUDIO

IN jacks on the stereo. Match the

cable colors to the jack colors. Audio

cables are not supplied. Use RCA-style

cables.

COAXIAL

Set your stereo to Auxiliary In or

Audio cables to

Stereo’s AUDIO IN jacks

the correct “Source” mode. See

your stereo owner’s manual for details.

Digital Stereo Hookups

You can connect the TV/VCR/DVD to a Stereo

that has a Digital Coaxial In jack. Use this

hookup if you want to hear the TV/VCR/DVD

sound through the Stereo instead. Use these

connections for a Dolby Digital-compatible

Stereo or for a Receiver that has a Mini-Disc

or Digital Audio Tape deck.

To orange

COAXIAL jack

on TV/VCR/DVD

ANT.

AUDIO OUT

COAXIAL

Connect the antenna/Cable TV

signal. Details are on pages eight-nine.

AUDIO OUT

Connect a digital audio coaxial

cable (not supplied) to the orange

COAXIAL jack on the

TV/VCR/DVD.

Also connect the cable to the

Stereo’s COAXIAL DIGITAL

AUDIO IN jack.

COAXIAL

To Stereo’s COAXIAL

DIGITAL AUDIO IN jack

If the Stereo is Dolby Digital-com-

patible, set DOLBY DIGITAL to

Helpful Hints

ON. If the Stereo is not Dolby Digital-

• You cannot use a Mini-Disc or

Digital AudioTape deck to copy

5.1 channel Dolby Digital sur-

round sound Discs.

compatible or if you connected to a

Mini-Disc or Digital Audio Tape Deck,

set DOLBY DIGITAL to OFF. Details are

on page 72.

• Discs recorded in Dolby Digital

should show this on the Disc or

case. If the Disc is not recorded

in 5.1 channel Dolby Digital sur-

round sound, you will not hear

multi-channel sound even if you

use the Digital Stereo hookup.

An incorrect setting causes noise distor-

tion and damages speakers.

To see if your Stereo has Dolby Digital,

look for a Dolby Digital logo on your

Stereo. Or, refer to the Stereo owner’s

manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 11

First-Time Setup,WatchingTV 11

The TV/VCR/DVD can memorize available TV channels.

If you are using a Cable Box or Satellite Receiver, you do not

need to set channels at the TV/VCR/DVD. Set the

TV/VCR/DVD to the output channel of the Cable Box or

Satellite Receiver (channel 03 or 04 or AUX). Then select

channels at the Cable Box or Satellite Receiver.

These screens appear only the first time you turn on the

TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Press STANDBY-ON to turn on the

TV/VCR/DVD.

PLAY

STOP

DISC

RECORD

2-3

Press ENTER to select ENGLISH (ENG),

ESPANOL (ESP), or FRANCAIS (FRA).

DISPLAY

SETUP

ENTER

The selected language will appear inside the [ ].

TITLE

RETURN

REPEAT

This will be the language of the TV/VCR/DVD setup

CLEAR SEARCH MODE REPEAT

menus.

A-B

AUDIO SUBTITLE ANGLE

MODE

– SETUP –

B LANGUAGE

[ENGLISH] ESP FRA

AUTO PRESET

Press L or M to select AUTO PRESET.

Then press ENTER. The TV/VCR/DVD scans and

memorizes available channels.

When scanning is complete, the TV/VCR/DVD will go

to the lowest available channel. Or, to stop the chan-

nel scanning, press SETUP.

– SETUP –

LANGUAGE

[ENGLISH] ESP FRA

AUTO PRESET

Helpful Hints

• If the power fails, you may need

to repeat this first-time setup.

• The first-time setup menus only

appear the first time you turn on

theTV/VCR/DVD.To set up chan-

nels or change the menu lan-

guage later, see page 18.

• To select channels above 99,

press the +100/+10 button, then

press the Number buttons for

the last two digits. For example,

to select channel 125, press

+100/+10, 2, 5. Precede single-

digit channel numbers with a

zero (for example, 01...09).

• If you do not want to set up the

language and channels now,

press the SETUP button on the

remote to remove the menus.

See page 18 later to set the

menu language andTV channels.

To watch TV, press the CH. L/M buttons to

select memorized channels. Memorized channels are

those that appear when you flip through channels. If a

channel is skipped, you still can use the Number but-

tons to select it. This is a non-memorized channel; it

may have weak reception in your area.

Remember, if you are using a Cable Box/Satellite

Receiver, set the TV/VCR/DVD to channel 3, 4, or

AUX. Change channels at the Cable Box/Satellite

Receiver.

Press VOL. L/M to adjust the volume.

VOLUME 20

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 12

12 Playing a Videotape

Follow these steps to simply play a videotape. Videotape play-

back options are on pages 34-40.

STANDBY-ON PICTURE SLEEP SELECT

Insert a videotape in the cassette compartment

of the TV/VCR/DVD. The power will come on. If

CH.

the tape’s record tab is missing, play should start auto-

matically.

+100

VOL.

+10

ZOOM

If play does not start automatically, press

PLAY B to start play.

SPEED C.RESET

MUTE

PLAY

STOP

Press STOP C to stop play.

DISC

RECORD

DISPLAY

SETUP

Press j / h to rewind the tape.

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

When the tape finishes rewinding, press

AUDIO SUBTITLE ANGLE

MODE

STOP/EJECT on the front of the TV/VCR/DVD

to remove the tape.

Helpful Hints

• If the tape you want to play is

already in theTV/VCR/DVD, turn

on the power. Press SELECT to

chooseTV/VCR mode (the red

VCR/TV light will be on), then

press PLAY B.

• When you play an S-VHS format

tape, you cannot get the high

resolution that would be avail-

able on an S-VHSVCR. Noise

lines (black and white streaks)

may appear in the picture.

• If you press SELECT while play-

ing a videotape, play will stop

and the unit will switch to DVD

mode.This will happen also if

you press PLAY B (DVD) or

OPEN/CLOSE A (DVD) on the

front of the TV/VCR/DVD during

videotape playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 13

Playing a Disc 13

Before you begin, turn on the power of other equipment con-

nected to the TV/VCR/DVD. Set a stereo (if applicable) to the

correct sound source or channel. Details are on page 10.

STANDBY-ON PICTURE SLEEP SELECT

Press STANDBY-ON to turn on the

CH.

TV/VCR/DVD. The unit will be in TV/VCR mode.

The red VCR/TV light will be on.

+100

VOL.

+10

Press SELECT to put the TV/VCR/DVD in DVD

SPEED C.RESET

ZOOM

MUTE

mode. The green DVD light will appear on the front

of the TV/VCR/DVD.

PLAY

STOP

DISC

RECORD

Press OPEN/CLOSE A on the front of the

TV/VCR/DVD to open the Disc tray.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Place a Disc into the tray.

AUDIO SUBTITLE ANGLE

MODE

Some DVDs are recorded on both sides. Make sure the

label of the side you want to play is facing up.

Or, if the DVD is recorded on only one side, place the

Disc in the tray with the label facing up and the shiny

side facing down.

Press OPEN/CLOSE A on

the front of the

TV/VCR/DVD.

Insert a Disc.

Helpful Hints

• If you turn off the unit in DVD

mode, when you turn it on again, it

will be inTV/VCR mode.

Press PLAY B. The tray will close and play will begin.

If play does not start, press PLAY B again.

• An ‘’X” will appear on the screen

when you try to access a feature

that is not available.This is not a

problem with theTV/VCR/DVD.

• If a Disc is dirty or scratched, the

picture may be distorted or play

may stop. Remove the Disc and try

a different one.

• Press OPEN/CLOSE A (DVD) or

PLAY B (DVD) on the front of the

TV/VCR/DVD when the power is

off.This turns on the unit in DVD

mode (notTV/VCR mode).

Or, you can press OPEN/CLOSE A or press the tray

toward the unit to close the tray.

If a DVD Disc menu appears instead, see page 51.

For MP3 and JPEG details, see page 66.

Press STOP C to stop play. If play remains stopped

for five minutes, the DVD screen will dim. If play is

stopped for 20 minutes with no activity at the

TV/VCR/DVD, the unit will turn off.

• If a Disc has multiple layers, the

picture may freeze occasionally.

This happens when the first layer

switches to the second layer.This is

not a malfunction.

• Pressing SELECT during Disc play

stops Disc play and switches the

unit toTV/VCR mode. Pressing

PLAY B (VCR) on the front of the

unit during Disc play stops Disc

play and starts tape play.

Remember, only certain Discs will play.

See page six for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 14

14 Remote Control Buttons

PICTURE Button

SLEEP Button

Press to access the picture controls.

Details are on page 25.

Press to set the Sleep Timer.

Details are on page 36.

STANDBY-ON Button

Press to turn on or off the

TV/VCR/DVD.

SELECT Button

Press to choose TV/VCR or DVD

mode. The corresponding light will

appear on the front of the

TV/VCR/DVD to indicate which

mode is active. Details are on page

16.

Number Buttons

TV Mode: Press two digits to

STANDBY-ON PICTURE SLEEP SELECT

access a specific channel. Press 0

before the number of a single-digit

channel. Details are on page 11.

+100/+10 button: To select

channels 100 or higher, press

+100/+10, then the Number

buttons of the last two digits of the

channel number.

PLAY B Button

CH.

Press to start playing a Disc or

video cassette. Details are on pages

12-13.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

G / g Button

PLAY

STOP

DVD Mode: Use the Number

buttons to enter a Track or

Chapter number.

+100/+10 button: Press before

entering double-digit numbers. For

example, to select Chapter 16,

press +100/+10, then 1, 6.

During Disc playback, press briefly

to skip to the next Track or

Chapter. Details are on page 54.

Or, press and hold for two seconds

to search forward during Disc

playback. Details are on page 52.

Press to forward a videotape.

Details are on page 39.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

k (pause) Button

Press to pause videotape recording.

Press again to resume recording.

Details are on page 26.

STOP C Button

Press to stop Disc or videotape

playback.

Press to pause videotape or DVD

playback. Press repeatedly to

advance the picture one frame at a

time. Details are on pages 39 and 55.

Arrow Buttons

Use the Arrow buttons to select or

adjust menu items.

RECORD Button

RETURN Button

Press once to start a recording on

videotape. Details are on page 26.

Press to go to the previous Setup

menu in DVD mode. Press to

remove some menus or displays.

DISPLAY Button

TV/VCR Mode: Press to see the

videotape counter, channel, or time

on the screen. Details are on page

25.

REPEAT Button

Press to play a Disc, Title, Chapter,

or Track repeatedly. Details are on

page 56.

DVD Mode: Press to see the Disc

status on the screen. Details are on

page 73.

TITLE Button

Press to access a DVD’s Title menu

if available. Details are on page 51.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 15

Remote Control Buttons (cont’d) 15

ZOOM Button

CH. (channel) K/L Buttons

Press to select memorized TV

channels.

Press to enlarge the picture during

DVD playback. Details are on page

59.

Details are on page 11.

C.RESET (counter reset)

Button

VOL. (volume) K/L Buttons

Press to reset the tape counter to

0:00:00. Details are on page 36.

Press to cancel a timer recording.

Details are on page 31.

Press to adjust the volume.

STANDBY-ON PICTURE SLEEP SELECT

MUTE Button

Press to mute or restore the

sound.

SPEED Button

CH.

Press to choose a tape recording

speed (SP or SLP). Details are on

page 26.

+100

VOL.

DISC MENU Button

Press to access DVD Disc menus.

Details are on page 51.

+10

SPEED C.RESET

ZOOM

MUTE

j / h Button

PLAY

STOP

During Disc play, press briefly to

skip to the beginning of the current

Track/Chapter. Press repeatedly to

skip to previous Tracks/Chapters.

Details are on page 54.

DISC

RECORD

ENTER Button

Press to accept or change a menu

setting.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Or, press and hold for two seconds

to search backward during Disc

playback. Details are on page 52.

Press to reverse a videotape.

Details are on page 39.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

REPEAT A-B Button

Press to set a section of a Disc to

play repeatedly. Details are on

page 56.

SETUP Button

Press to access or remove the

TV/VCR/DVD's Setup menu.

ANGLE Button

Press to change the camera angle

and watch a Disc sequence from a

different perspective. Details are on

page 58.

CLEAR Button

Press to reset or erase a setting or

wrong information.

MODE Button

Press to play a Program or to start

Random playback. Details are on

page 65.

SUBTITLE Button

Press to select a subtitle language.

Details are on page 58.

Press to select a Black Level or

Virtual Surround setting. Details are

on page 74.

AUDIO Button

Press to select an audio language or

sound mode. Details are on page 64.

SEARCH MODE Button

Press to find a specific time,

Chapter, Track, or Title on a Disc.

Details are on pages 53-54.

Press to set up Markers. Details are

on page 57.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 16

16 Front Panel

Cassette Compartment

Insert a videotape here.

Disc tray

Insert a Disc here.

CHANNEL K/L Buttons

Press to select TV channels.

Details are on page 11.

OPEN/CLOSE A Button (DVD)

Press to open or close the disc tray.

Details are on page 13.

STANDBY-ON

SELECT

STOP C Button (DVD)

Press to stop Disc playback.

Details are on page 13.

VOLUME

PLAY

STOP

OPEN/CLOSE

CHANNEL

REC/OTR

REW

PLAY

F.FWD

STOP/EJECT

AUDIO

TV/VCR

VOLUME K/L Buttons

Press to adjust the volume.

D V D

V C R

OUTPUT

STANDBY-ON

CHANNEL

VOLUME

PLAY

STOP

OPEN/CLOSE

REC/OTR

REW

PLAY

F.FWD

STOP/EJECT

HEADPHONE VIDEO

AUDIO

D V D

VCR/TV

STANDBY-ON Button

STOP/EJECT C A

Press to turn the TV/VCR/DVD on or

off. Turn off the TV/VCR/DVD for a

timer recording.

Button (VCR)

Press to stop tape playback.

Press while play is stopped

to remove the tape.

F.FWD i Button

(VCR)

PLAY B Button (DVD)

Press to start Disc playback.

Details are on page 13.

PREV H,

Press to fast forward the

tape or to search forward

quickly during playback.

Details are on page 39.

PLAY B Button (VCR)

Press to start tape playback.

Details are on page 12.

VIDEO and AUDIO L/R

(left/right) In jacks Use

audio and video cables to

connect these jacks to the

Audio and Video Out jacks

of a Camcorder, DVD

Player, or VCR. This lets

you watch materials playing

on the other equipment

when you choose AUX at

the TV/VCR/DVD. Details

are on pages nine and 33.

HEADPHONE jack

Connect headphones (not

supplied) here for personal

listening.

NEXTi Buttons (DVD)

Press to go to a different Chapter or

Track. Details are on page 54.

DVD light (green)

Appears if the TV/VCR/DVD is in

DVD mode.

OUTPUT Button

Press to select AUX, TV/VCR, or

DVD mode. If you switch to TV/VCR

mode, wait about four seconds before

switching back to DVD mode. This

button works the same as the SELECT

button on the remote.

VCR/TV light (red)

Appears if the TV/VCR/DVD is in

TV/VCR mode.

REC/OTR light (red)

This light flashes during recording. It

lights when the TV/VCR/DVD is in

Standby mode (power off) for a timer

recording.

REC/OTR Button (VCR)

Press to start a videotape recording.

Details are on pages 26-27.

REW H Button (VCR)

Press to rewind the tape or to search

backward quickly during playback.

Details are on page 39.

Remote Sensor

Receives a signal from your

remote control so you can

operate the TV/VCR/DVD

from a distance.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 17

Rear Panel 17

ANT.

AUDIO OUT

COAXIAL

ANT. Jack

(Antenna In)

Connect an antenna or Cable TV signal here. This brings TV

channels to the TV/VCR/DVD. If you do not connect an antenna

or Cable TV signal to the TV/VCR/DVD (or connect to a Cable

Box/Satellite Receiver through this jack), you will not receive any

TV channels. Details are on pages eight-nine.

Power Cord

Connect to a standard AC outlet (120V/60Hz).

COAXIAL Jack

(Digital Audio Out) (orange)

Connect this jack to a Digital Stereo using a digital audio coaxial

cable (not supplied). Use this connection if the Stereo has Dolby

Digital compatibility and has a Digital Coaxial Audio In jack. You

may also use this connection when connecting the TV/VCR/DVD

to a Mini-Disc or Digital Audio Tape deck. Details are on page 10.

AUDIO OUT L/R jacks

(Audio Out, left and right, white and red)

Connect these jacks to an analog Stereo. The Stereo will have

right and left Audio In jacks. This means it receives and sends

sound through two channels, the right and the left. These jacks

are usually red and white on the Stereo.

Details are on page 10.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 18

18 Menu Language, ResettingTV Channels

Menu Language

This affects the language of the TV/VCR/DVD’s setup menus

and on-screen display terms. It does not alter the language of

TV programming, videotapes, Discs, or closed captioning.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SETUP once so the TV/VCR SETUP

menu appears.

+100

VOL.

+10

Press L or M to select LANGUAGE.

SPEED C.RESET

ZOOM

MUTE

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

PLAY

STOP

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF]

DISC

RECORD

2-3

1,4

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

Press ENTER repeatedly to select ENGLISH,

ESPANOL, or FRANCAIS. The selected language

will appear inside the [ ].

This will be the language of the TV/VCR/DVD setup

menus in both TV/VCR and DVD modes.

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP to exit the menu.

STANDBY-ON PICTURE SLEEP SELECT

Resetting TV Channels

The TV/VCR/DVD may memorize channels when you turn it

on the first time. You may reset channels with these steps.

G Before you begin, put the TV/VCR/DVD in TV/VCR mode.

Press SELECT so the red VCR/TV light appears on the

front of the TV/VCR/DVD.

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Press SETUP.

PLAY

STOP

DISC

Press L or M to select CHANNEL SET UP.

RECORD

2-3

Then, press ENTER.

DISPLAY

SETUP

ENTER

– TV/VCR SETUP –

TITLE

RETURN

REPEAT

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SET UP

USER'S SET UP

CLEAR SEARCH MODE REPEAT

A-B

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

Helpful Hints

TIME SEARCH

INDEX SEARCH

• TheTV/VCR/DVD cannot change

channels at the Cable Box or

Satellite Receiver. Set the

TV/VCR/DVD to 3, 4, or AUX.

Change channels at the Cable

Box/Satellite Receiver.

Press L or M to select AUTO PRESET. Press

ENTER. The TV/VCR/DVD memorizes available

channels. When scanning is complete, the

TV/VCR/DVD will go to the lowest available channel.

Use the CH L/M buttons to scan memorized chan-

nels. You can select non-memorized channels with the

Number buttons.

• If the power fails, you may have

to reset theTV channels.

• If you select Spanish or French

and need English, press SETUP.

Press L or M to select IDIOMA

or LANGAGE. Press ENTER to

select ENGLISH. Press SETUP to

remove the menu.

– CHANNEL SET UP –

ADD / DELETE CH (TV)

B AUTO PRESET

• You cannot resetTV channels

when the unit is in DVD mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 19

Adding/Deleting Channels 19

You can delete TV channels you no longer receive or seldom

watch. Or, you can add more channels if the TV/VCR/DVD

did not memorize all your favorite channels.

STANDBY-ON PICTURE SLEEP SELECT

G Before you begin, press SELECT to put the

TV/VCR/DVD in TV/VCR mode. The red VCR/TV

light will appear.

CH.

+100

VOL.

Press SETUP.

+10

SPEED C.RESET

ZOOM

MUTE

Press L or M to select CHANNEL SET UP.

PLAY

STOP

Then, press ENTER.

DISC

RECORD

2-5

1,6

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SET UP

USER'S SET UP

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

CLEAR SEARCH MODE REPEAT

A-B

ZERO RETURN

TIME SEARCH

AUDIO SUBTITLE ANGLE

MODE

INDEX SEARCH

Press L or M to select ADD/DELETE CH. (TV)

or (CATV) will appear beside ADD/DELETE CH. This

indicates whether you connected an Antenna (TV) or

a Cable TV signal (CATV) to the TV/VCR/DVD.

Then, press ENTER. The menu will disappear and a

TV channel will appear. The channel number will

appear, along with ADD/DELETE.

– CHANNEL SET UP –

B ADD / DELETE CH (TV)

AUTO PRESET

Press L or M until the channel you wish to add

or delete appears. You also can use the Number

buttons or the CH. L/M buttons to choose a channel.

Helpful Hints

• To confirm that a channel has

been added or deleted, press the

CH. L/M buttons to see if you

can or cannot select the channel.

Only memorized/added channels

can be selected with CH. L/M.

Use the Number buttons to

ADD / DELETE

Press ENTER to add or delete the channel.

To add a channel, press ENTER so ADD and the

channel number appear in light blue (teal). To delete a

channel, press ENTER so DELETE and the channel

number appear in light red (purple).

To delete another channel, repeat steps 4-5.

select deleted channels.

• If you connected an Antenna to

theTV/VCR/DVD, channels 2-69

will be available to add or delete.

If you connected to CableTV,

channels 1-125 will be available.

• This function will not operate

when the unit is in DVD mode.

Press SETUP when you are finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 20

20 Setting the Clock

Manual Clock Setting

You must set the clock before you can do a timer recording.

Set the clock manually. Afterward, use Auto Clock to moni-

tor the time. Details are on pages 22-23.

If you do not receive a PBS station that carries time signals,

you cannot use Auto Clock. Set AUTO CLOCK to OFF. The

time will remain as you set it manually.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

Before you begin ...

SPEED C.RESET

ZOOM

MUTE

G With the power on, press SELECT to put the

TV/VCR/DVD in TV/VCR mode. The red VCR/TV

light will appear.

PLAY

STOP

DISC

RECORD

2-4

Press SETUP.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press L or M to select SETTING CLOCK.

Then, press ENTER.

AUDIO SUBTITLE ANGLE

MODE

– TV/VCR SETUP –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press L or M to select MANUAL CLOCK SET.

Then, press ENTER.

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH

[02]

B MANUAL CLOCK SET

D.S.T.

[OFF]

While the MONTH space is flashing, press L or

M until the correct month appears. Then, press

– MANUAL CLOCK SET –

MONTH DAY

05 - - - - - - - - -

HOUR MINUTE

- - - - - -

YEAR

Helpful Hint

• You may have to reset the clock

after a power failure.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 21

Setting the Clock (cont’d) 21

While the DAY space is flashing, press L or M

STANDBY-ON PICTURE SLEEP SELECT

until the correct day appears. Then, press B.

An abbreviation for the selected day of the week will

appear.

CH.

– MANUAL CLOCK SET –

MONTH DAY

05 07 - - - - - - -

HOUR MINUTE

- - - - - -

YEAR

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

5-8

While the YEAR space is flashing, press L or M

until the correct year appears. Then, press B.

– MANUAL CLOCK SET –

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

MONTH DAY

05 07 WED 2003

HOUR MINUTE

- - - - - -

YEAR

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

While the HOUR space and AM or PM are

flashing, press L or M until the correct hour

appears. Then, press B.

– MANUAL CLOCK SET –

MONTH DAY

05 07 WED 2003

HOUR MINUTE

05 - - PM

YEAR

While the MINUTE space is flashing, press L

or M until the correct minute appears.

– MANUAL CLOCK SET –

MONTH DAY

05 07 WED 2003

HOUR MINUTE

05 40 PM

YEAR

Press SETUP. Although seconds are not displayed,

they begin counting from zero when you press SETUP.

Use this action to synchronize the clock exactly.

5:40 PM

Helpful Hint

• To adjust the clock later, follow

steps 1-3 on page 20.Then press

s or B to select the item you

want to change. Enter the cor-

rect information by pressing L

or M. Press SETUP when you are

finished.

Press DISPLAY to see the current time on

the screen. Details are on page 25.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 22

22 Setting the Clock (cont’d)

Auto Clock Setting

You can have the TV/VCR/DVD adjust the clock using your

PBS channel. Once you set the clock manually, the

TV/VCR/DVD will monitor the correct time and date broad-

cast by the PBS station.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Before you begin ...

G Turn on the TV/VCR/DVD power.

G Connect the antenna/Cable TV signal.

Details are on pages eight-nine.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

G Turn on the Cable Box/Satellite Receiver (if applicable).

G Set up the TV channels. Details are on pages 18-19.

G Set the clock manually. Details are on pages 20-21.

G Press SELECT to put the TV/VCR/DVD in TV/VCR

mode. The red VCR/TV light will appear.

PLAY

STOP

DISC

RECORD

2-3

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP.

Press L or M to select SETTING CLOCK.

Press ENTER.

– TV/VCR SETUP –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

With AUTO CLOCK selected, press ENTER so

ON appears beside AUTO CLOCK.

– SETTING CLOCK –

B AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH

[02]

MANUAL CLOCK SET

D.S.T.

[OFF]

Helpful Hint

• If theTV/VCR/DVD is connected

to a Cable Box or Satellite

Receiver, select the local PBS sta-

tion on the Cable Box/Satellite

Receiver. Set theTV/VCR/DVD to

the output channel of the Cable

Box/Satellite Receiver (03, 04, or

AUX).

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 23

Setting the Clock (cont’d) 23

If you already know your PBS channel number,

skip ahead to step 8. If you do not know the

channel number of your PBS station, press M

to select AUTO CLOCK CH SEARCH. Then

press ENTER.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

– SETTING CLOCK –

+10

AUTO CLOCK

[ON]

B AUTO CLOCK CH SEARCH

SPEED C.RESET

ZOOM

AUTO CLOCK CH

[02]

MUTE

MANUAL CLOCK SET

D.S.T.

[OFF]

PLAY

STOP

DISC

RECORD

7-9

G The TV/DVD/VCR will search for a channel that

carries a time signal. Channels that carry the time

will appear at the top of the screen. Use one of

these channels when you enter your AUTO

CLOCK CH at step 9.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

5-6,

A-B

AUDIO SUBTITLE ANGLE

MODE

This may take several minutes. An ‘’_ _” appears in

the lower left corner of the screen when the

search is complete.

– AUTO CLOCK CH SEARCH –

08 10 13

– –

Press SETUP to remove the AUTO CLOCK

CH SEARCH screen.

Press SETUP to access the menu again.

Press L or M to select SETTING CLOCK.

Then, press ENTER.

Press M to select AUTO CLOCK CH,

then press ENTER.

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

B AUTO CLOCK CH

[08]

MANUAL CLOCK SET

D.S.T.

[OFF]

Press { or B until the channel number of your

PBS station appears. Use the channel number

you found at step 4.

Helpful Hints

• During the Auto Clock Channel

Search, the picture may be dis-

torted.This is normal.

• If there are no PBS stations avail-

able, set AUTO CLOCK to off. Set

the clock manually.

Press SETUP to remove the menu.

Press STANDBY-ON to turn off the

TV/VCR/DVD and let the PBS channel update

the clock.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 24

24 Daylight-SavingsTime

When Daylight-Savings Time (D.S.T.) is ON, the clock will

move forward one hour on the first Sunday in April and

move back one hour on the last Sunday in October.

To turn Daylight-Savings Time ON or OFF, follow the steps

below.

G Before you begin, press SELECT to put the

TV/VCR/DVD in TV/VCR mode. The red VCR/TV

light will appear.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Press SETUP.

PLAY

STOP

DISC

RECORD

2-3

1,4

Press L or M to select SETTING CLOCK.

DISPLAY

SETUP

Then, press ENTER.

ENTER

TITLE

RETURN

REPEAT

– TV/VCR SETUP –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press L or M to select D.S.T. Then, press

ENTER until ON appears beside D.S.T. Or,

press ENTER so OFF appears beside D.S.T. if you

want to disable this feature.

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH

[02]

MANUAL CLOCK SET

B D.S.T.

[ON]

Press SETUP to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 25

Status Displays, Picture Controls 25

Status Displays

To see the Videotape Counter, Clock, or Channel number

on the screen in TV/VCR mode, press DISPLAY repeatedly.

The following will occur when Closed Captions are OFF.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press DISPLAY once to see the Videotape

counter. After five seconds, only the counter will

+100

VOL.

remain on the screen.

+10

STOP

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

COUNT 0:12:34

COUNT 0:12:39

DISPLAY

SETUP

ENTER

1-2

TITLE

RETURN

REPEAT

Press DISPLAY again to see the current time

and TV channel. After five seconds, only the clock

and channel number will remain on the screen. To

clear them, press DISPLAY again.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

STOP

5:40 PM

CH 2

5:40 PM

CH 2

STANDBY-ON PICTURE SLEEP SELECT

G When Closed Captions are ON, the status displays will

appear for only five seconds. Then all the information will

clear from the screen. Closed Caption details are on page 41.

CH.

+100

VOL.

+10

ZOOM

Picture Controls

SPEED C.RESET

Follow these steps to adjust the TV/VCR/DVD’s brightness,

sharpness, tint, color, or contrast.

MUTE

PLAY

STOP

Press PICTURE.

DISC

RECORD

2-3

DISPLAY

SETUP

ENTER

Within five seconds, press L or M to select the

picture control you want to adjust.

TITLE

RETURN

REPEAT

2 _{You can select BRIGHT, SHARPNESS, TINT, COLOR,}

CLEAR SEARCH MODE REPEAT

A-B

or CONTRAST.

AUDIO SUBTITLE ANGLE

MODE

BRIGHT

Helpful Hint

• Degaussing: Magnetism from

nearby appliances and speakers

might affect the color of theTV

picture. If this happens, move the

TV/VCR/DVD away from the

appliance. If the color is still not

correct, turn off the power for 30

minutes (for 27MDTR20) or dis-

connect the power cord for 30

minutes (19MDTR20).After 30

minutes, try using the unit again.

Within five seconds, press s or B to adjust the

picture control.

BRIGHT

to decrease brightness to increase brightness

SHARPNESS to make soft

to make clear

to add green

TINT

to add purple

COLOR

to decrease color

to brighten color

to increase contrast

CONTRAST to decrease contrast

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 26

26 Videotape Recording

Put a videotape in the

TV/VCR/DVD.

Place a tape with its record tab intact in the

cassette compartment of the TV/VCR/DVD.

The TV/VCR/DVD power will come on.

If the power is already on and a videotape is in the

unit, make sure the unit is in TV/VCR mode.

Press SELECT so the red VCR/TV light appears on the

front of the unit.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SPEED until the desired tape speed (SP

or SLP) appears in the bottom left corner of

+100

the screen. See tape speed details below.

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

Press CH. L/M or the Number buttons to

select the channel you want to record.

PLAY

STOP

You cannot change channels during recording. You

can only record and view one TV channel at a time.

DISC

RECORD

4-5

DISPLAY

SETUP

Press RECORD once to start recording.

ENTER

The REC/OTR light will flash on the front of the

TITLE

RETURN

REPEAT

TV/VCR/DVD. (If the tape does not have a record

CLEAR SEARCH MODE REPEAT

A-B

tab, the tape will eject. Insert another tape.)

AUDIO SUBTITLE ANGLE

MODE

To pause the recording, press k. To resume

recording, press k again or press RECORD.

To stop recording, press STOP C .

Tape Speeds

This chart shows the recording/playback time for three types

of video cassettes (T160, T120, and T60). There are three

playback speeds: SP, LP, and SLP. A tape will play only in the

speed in which it was recorded. When recording, you can

change the tape speed using the SPEED button. You cannot

record in LP speed on this TV/VCR/DVD.

Helpful Hints

• You cannot record DVD contents

onto a videotape using this unit.

• Recording options are on pages

27-32.

• If you pause a recording for five

minutes, the unit will start

Recording again automatically.

• You can change the tape speed by

pressing the SPEED button while a

recording is in progress. Some dis-

tortion may appear on the tape.

The slower the speed, the more programming you can fit on

the tape. SLP is the slowest speed.

Cassette type / Playback Time

Tape Speed

SP(Standard Play)

T160

2 hrs.

40 mins.

5 hrs.

T120

T60

2 hrs.

1 hr.

LP(Long Play)

(playback only)

4 hrs.

6 hrs.

2 hrs.

3 hrs.

20 mins.

SLP(Super Long Play)

8 hrs.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 27

One-Touch Recording 27

A One-Touch Recording (OTR) is an immediate timed

recording from 30 minutes to eight hours long.

STANDBY-ON PICTURE SLEEP SELECT

Before you begin ...

G Turn on the TV/VCR/DVD.

CH.

G Press SELECT to put the unit in TV/VCR mode.

The red VCR/TV light will appear on the front of the unit.

G Insert a videotape with its erase prevention tab in place.

Details are on page seven. Rewind or fast forward the tape

to the point at which you want to begin recording.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Press the Number buttons or CH. L/Mto

DISC

RECORD

select the channel you want to record.

DISPLAY

SETUP

Remember, if the TV/VCR/DVD is connected to a

ENTER

Cable Box/Satellite Receiver, the TV/VCR/DVD must

be on channel 3, 4, or AUX.

Select the channel you want to record at the Cable

Box/Satellite Receiver. Details are on page eight.

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SPEED to select a tape recording speed

(SP or SLP). Details are on page 26.

Press REC/OTR on the front of the

TV/VCR/DVD repeatedly to select a recording

length. Recording will start immediately.

Each press of REC/OTR will increase the recording

time by 30 minutes. The maximum recording length is

eight hours.

Press REC/OTR on the

front of the TV/VCR/DVD.

OTR (2:30)

Helpful Hints

• You cannot do an OTR with the

remote control.

• To show the remaining recording

time, press DISPLAY. OTR and

the remaining recording time will

appear briefly in the top left cor-

ner of the screen.

Press STOP C to stop a one-touch recording

before its designated end time. Otherwise,

recording will stop at the time you designated. The

TV/VCR/DVD will turn off when the OTR ends.

• If the tape ends before the

recording’s end time, the

TV/VCR/DVD will stop recording,

eject the tape, and turn itself off.

• An OTR will continue even if you

turn off theTV/VCR/DVD.The red

REC/OTR light will flash on the

front of theTV/VCR/DVD to indi-

cate recording is still in progress.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 28

28 Timer Recording

Follow the steps below to program the TV/VCR/DVD to

record TV programs while you’re away from home.

The TV/VCR/DVD will record and turn itself off automatical-

ly. You can set a maximum of eight timer recordings.

STANDBY-ON PICTURE SLEEP SELECT

Before you begin, make sure ...

CH.

G The clock is set. If the clock is not set, the MANUAL

CLOCK SET menu will appear. See pages 20-21 to set the

clock.

G Channels are set. Details are on page 18.

G A tape is in the TV/VCR/DVD. Make sure the record tab is

intact. Details are on page seven.

+100

VOL.

+10

SPEED C.RESET ZOOM

MUTE

PLAY

STOP

DISC

Press SETUP. Press L or M to select TIMER

RECORD

1-3

PROGRAMMING, then press ENTER.

DISPLAY

ENTER

– TV/VCR SETUP –

SETUP

TITLE

RETURN

REPEAT

B TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

CLEAR SEARCH MODE REPEAT

A-B

V-CHIP SET UP

AUDIO SUBTITLE ANGLE

MODE

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press L or M to select a program position.

Then, press B.

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- - - /- - - - - - :- -

- :- - - -

While CH is selected, press L or M to select

the channel you want to record. Then press B.

If the TV/VCR/DVD is connected to a Cable

Box/Satellite Receiver, the TV/VCR/DVD must be on

channel 3, 4, or AUX.

Set CH as 03, 04, or AUX in the Timer Programming

menu. Choose the channel you want to record at the

Cable Box/Satellite Receiver. Leave the Cable

Box/Satellite Receiver on for the timer recording.

Leave the TV/VCR/DVD set to AUX. (Press SELECT

on the remote to choose AUX at the TV/VCR/DVD.)

Additional details are on page eight.

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 - /- - - - - - :- -

- - - /- - - - - - :- -

- :- - - -

Helpful Hint

• If the tape ends before the record-

ing is complete, theTV/VCR/DVD

will stop recording immediately

and eject the tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 29

Timer Recording (cont’d) 29

While DATE is selected, press L or M until the

correct date appears. Recording will happen once.

STANDBY-ON PICTURE SLEEP SELECT

– TIMER PROGRAMMING –

CH DATE BEGIN END

CH.

- - - /- - - - - - :- -

B 61 7/04 FRI - :- -

- - - /- - - - - - :- -

- :- - - -

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Or, to record a program at the same time on

the same channel every weekday (Monday-

Friday), press M until EVRY DAY appears.

DISC

RECORD

4-5

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

– TIMER PROGRAMMING –

CLEAR SEARCH MODE REPEAT

CH DATE

BEGIN END

-B

- - - /- - - - - - :- -

B 61 EVRY DAY - :- -

- - - /- - - - - - :- -

- :- - - -

AUDIO SUBTITLE ANGLE

MODE

Or, to record a program at the same time on

the same channel every week, press M until

EVRY and a day of the week appear together.

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 EVRY MON - :- -

- - - /- - - - - - :- -

- :- - - -

Finally, press B.

While BEGIN is selected, press L or M to

select the hour you want recording to begin.

AM or PM will appear with the hour.

Then, press B and press L or M to select the

minute you want recording to start. Press B.

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 7/04 FRI 7:30

- - - /- - - - - - :- -

- :- - - -

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 30

30 Timer Recording (cont’d)

While END is selected, press L or M to select

STANDBY-ON PICTURE SLEEP SELECT

the hour at which you want recording to stop.

AM or PM will appear with the hour.

CH.

Then, press B and press L or M to select the

minute at which you want recording to end.

Press B.

+100

VOL.

+10

SPEED C.RESET

– TIMER PROGRAMMING –

ZOOM

MUTE

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 7/04 FRI 7:30

- - - /- - - - - - :- -

- :- - - -

PLAY

STOP

8:50 - -

- :- - - -

DISC

RECORD

6-7

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

Press L or M until the tape speed (SP or SLP)

appears at the right end of the line.

A-B

AUDIO SUBTITLE ANGLE

MODE

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 7/04 FRI 7:30

- - - /- - - - - - :- -

- :- - - -

8:50 SP

- :- - - -

Press SETUP to remove the menus.

Press STANDBY-ON to turn off the

TV/VCR/DVD and set the timer recording.

The red REC/OTR light will appear on the front of

the TV/VCR/DVD.

You must turn off the TV/VCR/DVD to activate a

timer recording. If the power is not off and you con-

tinue watching TV, TIMER REC STANDBY starts

flashing on the screen two minutes before the pro-

grammed start time. Turn off the unit to do the

recording.

Helpful Hints

• To correct information while set-

ting theTimer Recording, press

s to go back one step and

select the incorrect information.

Press L or M to enter the cor-

rect information.

• While a timer recording is in

progress, the red REC/OTR light

will flash.

• If a timer recording is set for

hours or days later, you can use

theTV/VCR/DVD until then. Just

be sure to turn off the

TV/VCR/DVD about five minutes

before the recording. Set the

Cable Box/Satellite Receiver if

appropriate.

• If the record tab is missing, the

videotape will eject when you

press STANDBY-ON to turn off

theTV/VCR/DVD. Insert a record-

able tape for the timer recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 31

Timer Recording (cont’d) 31

Extending a Timer Recording

To make a Timer Recording start and end later than originally scheduled,

follow these steps.

1 With the unit on, press SETUP. Press L or M to select TIMER PRO-

GRAMMING. Press ENTER.

2 Press RECORD, then press L or M to select the desired program.

3 Press RECORD again. Each press of RECORD will shift forward the

beginning/end time by 10 minutes. If the recording is in progress, each

press will shift forward the end time only.

If you adjust the times during recording, the recording speed automati-

cally changes to SLP.

To restore the original recording times, press k (pause).

4 Press SETUP to remove the menus.

5 If the timer recording is scheduled to start later, press STANDBY-ON

to turn off the TV/VCR/DVD for the recording.

Correcting a Timer Recording

1 With the unit on, press SETUP. Press L or M to select TIMER PRO-

GRAMMING. Press ENTER.

2 Press L or M to select a timer recording, then press B.

3 Press B or s to select the information you want to change.

Press L or M to enter the correct information.

4 Press SETUP to remove the menu.

5 Press STANDBY-ON to turn off the TV/VCR/DVD to set the record-

ing.

Cancelling Timer Recordings

To cancel a timer recording that is in progress:

1 The red REC/OTR light will flash during recording. Press STANDBY-

ON to turn on the TV/VCR/DVD, then press STOP/EJECT CA on the

front of the TV/VCR/DVD.

To cancel a timer recording that has not started:

1 With the unit on, press SETUP.

Press L or M to select TIMER PROGRAMMING. Press ENTER.

2 Press L or M to select a timer recording.

3 Press C.RESET. All the information for the selected recording will

disappear.

4 Press SETUP to remove the menu.

Checking Scheduled Timer Recordings

1 With the unit on, press SETUP.

Press L or M to select TIMER PROGRAMMING.

2 Press ENTER. The program details will appear on the screen.

3 Press SETUP to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 32

32 Timer Recording Auto Return

Use this feature to rewind the tape to the beginning of a

completed timer recording.

STANDBY-ON PICTURE SLEEP SELECT

Press SETUP.

CH.

+100

VOL.

+10

ZOOM

Press L or M to select USER’S SET UP.

Then, press ENTER.

SPEED C.RESET

MUTE

– TV/VCR SETUP –

PLAY

STOP

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

DISC

RECORD

2-4

1,5

LANGUAGE [ENGLISH]

CAPTION [OFF]

DISPLAY

SETUP

ZERO RETURN

ENTER

TIME SEARCH

INDEX SEARCH

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press L or M to select AUTO RETURN.

Press ENTER until ON appears beside AUTO

RETURN. To turn off AUTO RETURN, press

ENTER to choose OFF instead.

– USER'S SET UP –

RENTAL

[OFF]

REPEAT PLAY [OFF]

B AUTO RETURN [ON]

VCR AUDIO

TV AUDIO

[HIFI]

[STEREO]

Press SETUP. When AUTO RETURN is ON,

when all the timer recordings are completed, the tape

will rewind to the beginning of the recorded pro-

gram(s).

Helpful Hints

• If you press STANDBY-ON while

the tape is rewinding, the rewind-

ing will stop.

• If there is a power failure, the

TV/VCR/DVD will retain its mem-

ory for this feature.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 33

Rerecording (Tape Duplication) 33

AUDIO and VIDEO OUT Jacks on source unit

(VCR or Camcorder)

OP/EJECT

Audio Cables from

HEADPHONE VIDEO

AUDIO

AUDIO OUT to AUDIO In

AUDIO

OUT

VIDEO

OUT

AUDIO and VIDEO In

Jacks on TV/VCR/DVD

Video Cable from

VIDEO OUT to VIDEO In

Make the connections shown above. Use audio

and video cables (not supplied). Connect the

source unit (VCR or Camcorder) to a power

source after connections are made.

The VCR or Camcorder will play your tape. Insert a

prerecorded tape in the source unit. If play

begins, press STOP on the VCR or Camcorder.

The TV/VCR/DVD will record your tape. Insert a

blank videotape in the cassette compartment

of the TV/VCR/DVD. Make sure the tape’s record

tab is intact and the TV/VCR/DVD power is on.

Helpful Hints

• Unauthorized recording of copy-

righted television programs,

videotapes, or other materials

may infringe on the rights of

Point the TV/VCR/DVD remote control at the

TV/VCR/DVD. Press SELECT or CH. o/p until

AUX appears on the screen. The TV/VCR/DVD is

now in Line Input or Auxiliary mode.

Press SPEED until the desired tape speed (SP

or SLP) appears in the lower left corner of the

screen.

• Different brands of equipment

may operate differently.

• Make sure all connections are

secure. Otherwise, you may not

record both picture and sound.

• Programs that are copyright

protected may not record clearly.

• You cannot record a DVD onto a

videotape using this

Press PLAY on the VCR or Camcorder and

REC(ord)/OTR on your TV/VCR/DVD at the

same time. Videotape copying will begin.

To stop copying, press STOP/EJECT C A on

the TV/VCR/DVD, then stop the tape on the

VCR or Camcorder.

TV/VCR/DVD.

• You can use this connection to

simply view tapes playing on a

camcorder orVCR at the

TV/VCR/DVD. Follow steps 1, 2,

and 4 for connections and AUX

setup.Then play the tape on the

camcorder, etc., as usual.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 34

34 Repeat Play

Repeat Play allows you to play a videotape continuously.

ALL REPEAT will repeatedly play the tape from the begin-

ning to the end. BLANK REPEAT will repeatedly play the

tape from its beginning to the first part that is blank for

more than 10 seconds.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SETUP.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Press L or M to select USER’S SET UP.

Then, press ENTER.

DISC

RECORD

2-4

1,5

– TV/VCR SETUP –

DISPLAY

SETUP

ENTER

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

LANGUAGE [ENGLISH]

CAPTION [OFF]

A-B

ZERO RETURN

AUDIO SUBTITLE ANGLE

MODE

TIME SEARCH

INDEX SEARCH

Press L or M to select REPEAT PLAY.

Press ENTER until ALL or BLANK appears

beside REPEAT PLAY. Or, to cancel REPEAT

PLAY, press ENTER to select OFF.

– USER'S SET UP –

RENTAL

[OFF]

B REPEAT PLAY [ALL]

AUTO RETURN [OFF]

VCR AUDIO

TV AUDIO

[HIFI]

[STEREO]

Press SETUP to remove the menu.

Press PLAY B to play a videotape. REPEAT

PLAY B will appear on the screen briefly.

Helpful Hints

• Repeat Play stays in effect after

you turn off theTV/VCR/DVD.

TheTV/VCR/DVD keeps the

Repeat Play setting even if the

power fails.

• If RENTAL is ON, RENTAL PLAY

B will appear on the screen

instead of REPEAT PLAY B.

Details are on page 35.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 35

Rental Play 35

This function enables you to improve picture quality when

playing worn cassettes such as rented videotapes.

STANDBY-ON PICTURE SLEEP SELECT

Press SETUP.

CH.

+100

VOL.

Press L or M to select USER’S SET UP.

Then, press ENTER.

+10

ZOOM

SPEED C.RESET

MUTE

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

PLAY

STOP

DISC

RECORD

LANGUAGE [ENGLISH]

CAPTION [OFF]

2-3

1,4

ZERO RETURN

DISPLAY

SETUP

TIME SEARCH

ENTER

INDEX SEARCH

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press L or M to select RENTAL.

Press ENTER until ON appears beside

RENTAL. To turn off RENTAL, press ENTER to

choose OFF.

– USER'S SET UP –

B RENTAL

[ON]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

VCR AUDIO

TV AUDIO

[HIFI]

[STEREO]

Press SETUP to exit the menu.

Press PLAY B to start videotape play. RENTAL

PLAY B will appear briefly on the screen.

Helpful Hints

• Once you select Rental Playback,

it stays in effect even after you

turn off theTV/VCR/DVD.

• TheTV/VCR/DVD will retain the

Rental setting even if the power

fails.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 36

36 Zero Return, SleepTimer

Zero Return

The videotape counter shows the elapsed recording or play-

back time in hours, minutes, and seconds from the point at

which the counter was set to zero. The counter time will not

change on a blank tape or blank portions on a tape. The “–”

before the tape counter indicates the amount of remaining

recording/playing time before the counter reaches zero.

Follow the steps below to reset the tape counter to zero at

a tape location you want to refer to later.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Play, rewind, or fast forward the tape to the

DISC

location you would like to refer to later.

RECORD

Press STOP C to stop the tape.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press C.RESET to set the counter to 0:00:00.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

To return to this same point later, press

SETUP. Press L or M to select ZERO

RETURN. Then, press ENTER.

The tape counter will appear on the screen. When

the tape reaches the point at which you set the

counter to zero, the tape will stop. Press PLAY B to

watch the tape from the designated point.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

STANDBY-ON PICTURE SLEEP SELECT

B ZERO RETURN

TIME SEARCH

INDEX SEARCH

CH.

+100

VOL.

Sleep Timer

+10

ZOOM

Use the Sleep Timer to program the TV/VCR/DVD to shut

off in a certain amount of time.

SPEED C.RESET

MUTE

PLAY

STOP

Press SLEEP until the correct amount of time

appears on the screen with SLEEP. Each press

DISC

RECORD

of SLEEP will increase the time by 30 minutes. You

DISPLAY

SETUP

may set a Sleep Timer of 30, 60, 90, or 120 minutes.

After five seconds, the Sleep Timer information will

disappear from the screen. The TV/VCR/DVD will

turn itself off after the selected amount of time has

passed.

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Helpful Hint

SLEEP 120 MINUTE

• To see how much time remains

before theTV/VCR/DVD turns

itself off, press SLEEP once.The

information will disappear auto-

matically in five seconds.

To Cancel the Sleep Timer

Press SLEEP until “SLEEP 0 MINUTE” appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 37

Time Search 37

Time Search lets you quickly advance the videotape to a posi-

tion simply by entering the amount of playback time you want

to skip.

In the example below, Time Search is set to 2 hours, 50 min-

utes from the present position.

Insert a videotape.

STANDBY-ON PICTURE SLEEP SELECT

Insert a videotape.

CH.

Press SETUP. Press L or M to select TIME

+100

VOL.

SEARCH. Then, press ENTER.

+10

ZOOM

SPEED C.RESET

MUTE

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

B TIME SEARCH

INDEX SEARCH

PLAY

STOP

DISC

RECORD

2-4

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press L or M until your desired time appears

AUDIO SUBTITLE ANGLE

MODE

beneath TIME SEARCH at the top of the

screen. (Example: 2:50 for 2 hours, 50 minutes)

Each press of L or M increases or decreases the

length of time by 10 minutes.

To cancel the Time Search at this point, press SETUP.

TIME SEARCH

2 : 50

Press s or B to rewind or fast forward the

tape the length of time you chose.

The TV/VCR/DVD will rewind or fast forward the

tape the specified amount of time.

The time counts down on the screen as the search

progresses. When 0:00 is reached, the tape will start

playing.

Or, to cancel the time search before it finishes, press

STOP C.

Helpful Hints

• ATime Search can be set up to a

maximum of 9 hours 50 minutes

in 10-minute increments.

• Time Search will not operate dur-

ing recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 38

38 Index Search

This feature lets you quickly rewind or fast forward to the

start of recordings.

STANDBY-ON PICTURE SLEEP SELECT

G Index Marks are made automatically at the start of all

recordings. They are not made where recording pauses.

The time gap between Index Marks should be greater than

one minute for SP recording and three minutes for SLP

recording. This means recordings should be one (SP) or

three (SLP) minutes long. Otherwise, Index Search may not

find the start of the recording. In some cases, Index Marks

at the beginning of a videotape cannot be detected.

CH.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Press SETUP. Press L or M to select INDEX

DISC

RECORD

1-3

SEARCH. Then, press ENTER.

DISPLAY

SETUP

ENTER

– TV/VCR SETUP –

TITLE

RETURN

REPEAT

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

CLEAR SEARCH MODE REPEAT

A-B

V-CHIP SET UP

AUDIO SUBTITLE ANGLE

MODE

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

B INDEX SEARCH

Press L or M until the number of programs you

want to skip appears beneath INDEX SEARCH.

To cancel an Index Search at this point, press SETUP.

INDEX SEARCH

0 3

Press s or B. The TV/VCR/DVD begins rewinding

or fast forwarding the videotape to the beginning of

the desired program.

Helpful Hints

• Every time an Index Mark (or

recording) is passed, the number

beneath INDEX SEARCH on the

screen decreases by one.

• A videotape must be in the

TV/VCR/DVD for this function to

work.

When the program is reached, play will start.

• You may search up to 20 Index

Marks.

• This function will not operate dur-

ing recording.

• To cancel an Index Search, press

STOP C .

• If the end of the tape is reached

during an Index Search, the tape

will rewind to the beginning.The

TV/VCR/DVD will turn off and the

tape will eject.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 39

Videotape Playback Features 39

Slow Motion

Press k (pause) during play to pause the

videotape. Then press i / g to start slow

motion. Sound will be mute during slow motion.

Slow motion will stop automatically after five minutes

to prevent damage to the tape.

POWER PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

Press PLAY B to return to normal playback.

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

Forward and Reverse Searching

(SP/LP/SLP)

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

During videotape play, press and release i /

CLEAR SEARCH MODE REPEAT

g or j / h. A fast forward or reverse pic-

A-B

ture search will begin.

AUDIO SUBTITLE ANGLE

MODE

To return to normal play, press PLAY B .

Super High Speed Searching (LP/SLP)

During tape play, press i / g or j / h,

then press again. The TV/VCR/DVD will search the

tape in high speed.

Press i / g or j / h repeatedly to switch

between regular and high speed searching.

To return to normal play, press PLAY B.

Viewing a Still Picture

During tape play, press k (pause).

A still picture will appear on the screen. The picture

advances each time you press k (pause).

Helpful Hints

After a tape is paused for five minutes, play will stop

automatically. This prevents damage to the tape and

TV/VCR/DVD.

• SP/LP/SLP means this feature will

work with tapes recorded in

Standard Play, Long Play, or

Super Long Play. LP/SLP means

this feature will work with tapes

recorded in Long Play and Super

Long Play.Tape speed details are

on page 26.

If the still picture vibrates vertically, stabilize

the picture by pressing CH. L or M.

To release the still picture and return to nor-

mal play, press PLAY B.

• During forward and reverse

searching, horizontal noise bars

will appear on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 40

40 Automatic Operation Features

The following videotape features are available.

Automatic Rewind, Eject, Off

When you play, fast forward, or record a videotape to its

end, the TV/VCR/DVD will rewind the tape, stop, turn itself

off, and eject the tape.

If REPEAT PLAY is activated, play will start again instead.

Details are on page 34.

The tape will not rewind automatically after a timer recording

or One-Touch Recording ends. To rewind a tape after timer

recordings, see Auto Return details on page 32.

Automatic Tracking Adjustment

The TV/VCR/DVD automatically adjusts the videotape track-

ing to give you the best possible picture quality. With some

recordings, however, you may get a better picture using the

manual tracking controls (see below).

Manual Tracking

To adjust the tracking manually, press the CHANNEL L/M

buttons on the front of the TV/VCR/DVD or the CH. L/M

buttons on the remote control during playback.

Tracking returns to Automatic Tracking Adjustment when

you insert a tape or press STOP C.

After

Before

Tracking

Adjustment

Tracking

Adjustment

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 41

Closed Captions 41

Follow the steps below to select closed captions for TV pro-

gramming. Not all TV programs and commercials have closed

captions or all types of closed captions (second language,

half-screen text, etc.). If closed captioning is not broadcast,

you cannot receive it. This does not indicate a problem with

the TV/VCR/DVD. Check your TV program listings for

shows with closed captions.

If the TV/VCR/DVD receives poor quality television signals,

the captions may contain errors, or there might be no cap-

tions at all. Some possible causes of poor quality signals are:

G Automobile ignition noise

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

G Electric motor noise

G Weak signal reception

DISC

RECORD

1-2

1,3

G Multiplex signal reception (ghosts or screen flutter)

G Playing poorly recorded or worn videotapes.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press SETUP.

AUDIO SUBTITLE ANGLE

MODE

Press L or M to select CAPTION.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press ENTER repeatedly to select CAPTION1,

CAPTION2, TEXT1, TEXT2, or OFF.

CAPTION1 displays standard closed captions (what a

character is saying). CAPTION2 displays foreign lan-

guage closed captions (foreign language words show-

ing what a character is saying).

TEXT1 and TEXT2 display half-screen text (such as a

channel guide, schedule, or announcement).

OFF turns off closed captions. Captions will not

appear on the screen.

Helpful Hints

• If a black box appears on the

screen, aTEXT mode is selected.

Select CAPTION1, CAPTION2, or

OFF.

• TheTV/VCR/DVD retains the

Closed Caption setting if the

power fails.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [CAPTION 1]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

• Abbreviations, symbols, and other

grammatical shortcuts may be

used in order to keep pace with

the on-screen action.This is not a

problem with theTV/VCR/DVD.

• Changing channels may delay

closed captions for a few seconds.

• Adjusting or muting the volume

may delay closed captions for a

few seconds.

Press SETUP to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 42

42 Setting V-Chip

TV Rating Settings

V-CHIP enables parents to prevent their children from

watching inappropriate material on TV. V-CHIP reads the

ratings for programming (except for news and sports pro-

grams, unedited movies on premium cable channels, and

Emergency Broadcast System signals), then denies access to

programming if the program’s rating meets the limitations

you select. In this case, a “PROTECTED PROGRAM by ...”

message appears on the TV screen.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

If the “PROTECTED...” message appears during your TV

viewing, change to a channel that is not blocked. Then, you

can access the V-CHIP SETUP menu and change the settings

to allow all TV viewing.

Programming may be rated by the Motion Picture

Association of America (MPAA) or according to the

Television Parental Guidelines. To block any inappropriate

programming, set your limits in both MPAA RATING and

TV RATING.

PLAY

STOP

DISC

RECORD

1,3

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Before you begin, make sure ...

G The TV/VCR/DVD is on.

G The unit is in TV/VCR mode. Press SELECT on the

remote until you see TV channels and see the red

VCR/TV light on the front of the TV/VCR/DVD.

Press SETUP. Press L or M to select V-CHIP

SET UP. Then, press ENTER.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press the Number buttons to enter the four-

digit access code. When entering the access code

for the first time or if there has been a power failure,

enter default code 0000. Four Xs will appear instead

of your code. This protects the identity of your code.

ACCESS CODE

–

TV Rating Explanations

Press L or M to select TV RATING.

Then, press ENTER.

• TV-Y - Appropriate for all chil-

dren

• TV-Y7 - Appropriate for chil-

dren seven and older

• TV-G - General Audience

• TV-PG - Parental Guidance

suggested.

– V-CHIP SET UP –

TV RATING

MPAA RATING

CHANGE CODE

• TV-14 - Unsuitable for children

under 14

• TV-MA - Mature audience only

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 43

Setting V-Chip (cont’d) 43

Press L or M to select the TV Rating level at

which you want to block viewing, then press

ENTER once. If you press ENTER again, the subrat-

ings for that category will appear.

Details are on pages 44-45.

When you select the rating category and set it to

BLOCK, the higher ratings will turn to BLOCK auto-

matically. Lower ratings will turn to VIEW.

When you set “TV-Y” to VIEW (or BLOCK), all rat-

ings will turn to VIEW (or BLOCK) automatically.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

TV-Y

TV-Y7

[VIEW]

(

)

[VIEW]

DISPLAY

SETUP

B TV-G

TV-PG

TV-14

[BLOCK]

ENTER

(

)

TITLE

RETURN

REPEAT

TV-MA

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP to save your settings and

remove the menus.

Helpful Hints

• If you want to disableV-Chip so

you can view allTV programming,

setTV-Y toVIEW.

• TheV-CHIP settings will be

retained after a power failure

(except the access code reverts to

0000).

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 44

44 Setting V-Chip (cont’d)

TV Rating Subratings

When you select TV-Y7, TV-PG, TV-14, or TV-MA, you can

use the subratings to block specific elements of program-

ming, such as language or violence.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SETUP.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Press L or M to select V-CHIP SET UP.

PLAY

STOP

Press ENTER.

DISC

– TV/VCR SETUP –

RECORD

2,4

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

DISPLAY

SETUP

ENTER

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TITLE

RETURN

REPEAT

ZERO RETURN

CLEAR SEARCH MODE REPEAT

TIME SEARCH

A-B

INDEX SEARCH

AUDIO SUBTITLE ANGLE

MODE

Press the Number buttons to enter the four-

digit access code. The default code is 0000 (if you

have not set up your own code yet or if there has

been a power failure).

ACCESS CODE

–

Press L or M to select TV RATING.

Press ENTER.

– V-CHIP SET UP –

B TV RATING

MPAA RATING

CHANGE CODE

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 45

Setting V-Chip (cont’d) 45

Press L or L to select the rating you wish to

STANDBY-ON PICTURE SLEEP SELECT

adjust. Then, press ENTER twice to go to its

subratings.

CH.

Example:

TV-Y7 subratings

TV-Y7

B FV

[BLOCK]

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

DISC

RECORD

G When you select TV-Y7:

Press L or M to select FV (Fantasy Violence, vio-

lence that seems realistic to young children).

Then, press ENTER to select BLOCK or VIEW.

G When you select TV-PG, TV-14, or TV-MA:

Press L or M to select “D” (Suggestive Dialog), “L”

(Coarse Language), “S” (Sexual Situation), or “V”

(Violence). Then, press ENTER repeatedly to select

BLOCK or VIEW for each subrating.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

To go to the previous menu, press RETURN.

Press SETUP to save your settings and remove the

menus.

Helpful Hints

• Dialog (D) is not an available

subrating forTV-MA.

• Blocked subratings will appear

beside the rating category in the

TV ratings menu.

• You cannot BLOCK a subrating

(D, L, S, orV) if the main catego-

ry is set toVIEW. However, you

can set a subrating toVIEW even

when the main category is set to

BLOCK.

• Changing the category to BLOCK

orVIEW automatically changes

all its subratings to the same

(BLOCK orVIEW).

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 46

46 Setting V-Chip (cont’d)

MPAA Rating Settings

You can block TV channel viewing according to the Motion

Picture Association ratings. To do so, follow these steps.

STANDBY-ON PICTURE SLEEP SELECT

Press SETUP.

CH.

+100

VOL.

Press L or M to select V-CHIP SET UP.

Then, press ENTER.

+10

ZOOM

SPEED C.RESET

MUTE

– TV/VCR SETUP –

4-5

1,6

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

PLAY

STOP

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

DISC

RECORD

ZERO RETURN

DISPLAY

SETUP

TIME SEARCH

INDEX SEARCH

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press the Number buttons to enter the four-

AUDIO SUBTITLE ANGLE

MODE

digit access code. (The default code is 0000 if you

have not set up your own code yet or if the power

has failed.)

ACCESS CODE

–

Press L or M to select MPAA RATING.

Then, press ENTER.

– V-CHIP SET UP –

MPAA Rating Explanations

TV RATING

B MPAA RATING

CHANGE CODE

• G - General Audience

• PG - Parental Guidance suggested.

• PG-13 - Unsuitable for children

under 13

• R - Restricted; under 17 requires

accompanying parent or adult

guardian

• NC-17 - No one under 17 admitted

• X - Mature audience only

Press L or M to select the level at which you

want to block viewing. Then, press ENTER to

select BLOCK or VIEW.

When you Block a category, higher ratings turn to

BLOCK automatically. Lower ratings turn to VIEW.

When you set G to VIEW or BLOCK, all ratings turn

to VIEW or BLOCK automatically.

[VIEW]

PG-13

[VIEW]

B R

NC-17

[BLOCK]

Helpful Hints

• To disable all the MPAA Ratings,

set G toVIEW.

• TheV-CHIP settings will be

retained after a power failure

(except the access code reverts to

0000).

Press SETUP to save your settings and

remove the menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 47

Setting V-Chip (cont’d) 47

Changing the Access Code

Although the default code 0000 is supplied with the

TV/VCR/DVD, you can set your own access code.

STANDBY-ON PICTURE SLEEP SELECT

Press SETUP.

CH.

3,5

+100

Press L or M to select V-CHIP SET UP.

Then, press ENTER.

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Press the Number buttons to enter the old

access code. When doing this for the first time, use

0000. Four Xs will appear instead of the code to pro-

tect its identity.

DISC

RECORD

2,4

1,6

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

ACCESS CODE

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

–

Press L or M to select CHANGE CODE.

Then, press ENTER.

– V-CHIP SET UP –

TV RATING

MPAA RATING

B CHANGE CODE

Press the Number buttons to enter your pre-

ferred access code in the NEW CODE space.

Then, enter the same code in the CONFIRM

CODE space. Again, Xs will appear instead of the

code numbers. The access code must have exactly four

digits.

The V-CHIP SET UP screen will reappear.

NEW CODE

X X X X

CONFIRM CODE

– – – –

Helpful Hints

• If you enter the wrong code in the

CONFIRM CODE space, repeat

step 5. Enter the same new code

exactly in the CONFIRM CODE

space.

• If you unplug the power cord or if

the power fails, the default code

will be active again (0000).

Change your access code again as

necessary.

Press SETUP to save your settings and

remove the menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 48

48 Multi-ChannelTelevision Sound

Press DISPLAY to see the sound status. During

STANDBY-ON PICTURE SLEEP SELECT

TV viewing, press DISPLAY twice. During tape play,

press DISPLAY once.

CH.

STOP

HIFI

12:00AM

CH 123

STEREO/SAP

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

COUNT

0:00:00

PLAY

STOP

DISC

When a TV program is broadcast in stereo, STEREO

appears in the top right corner of the screen. When a

TV program is broadcast in second audio, SAP

appears in the top right corner of the screen. When a

TV program is broadcast both in stereo and second

audio, STEREO and SAP both appear.

Although a program may be broadcast in both stereo

and second audio, you cannot record in both stereo

and second audio at the same time.

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

During tape play, HIFI will appear in the top left cor-

ner of the screen if VCR AUDIO is set to HIFI. Details

are on page 49. If you play non-HiFi tapes while VCR

AUDIO is set to HIFI, HIFI will disappear from the

screen. The videotape will play in monaural sound.

You must set the TV/VCR/DVD to record in either

STEREO or SAP. Do this by changing the TV AUDIO

setting as described on page 50.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(1-49).QX33 03.3.28 11:52 Page 49

Multi-ChannelTelevision Sound (cont’d) 49

Selecting HiFi or Monaural Sound

You can play videotapes in either High Fidelity (HIFI) or

Monaural (MONO or single-channel) sound. To do so, fol-

low these steps.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

Press SETUP.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Press L or M to select USER’S SET UP.

Then, press ENTER.

DISC

RECORD

2-4

1,5

– TV/VCR SETUP –

DISPLAY

SETUP

ENTER

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

LANGUAGE [ENGLISH]

CAPTION [OFF]

A-B

AUDIO SUBTITLE ANGLE

MODE

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press L or M to select VCR AUDIO.

– USER'S SET UP –

RENTAL

[ON]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

B VCR AUDIO

TV AUDIO

[HIFI]

[STEREO]

Press ENTER to select MONO or HIFI.

– USER'S SET UP –

RENTAL

[ON]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

B VCR AUDIO

TV AUDIO

[HIFI]

[STEREO]

Press SETUP to exit the menus.

Helpful Hints

• Non-HiFi tapes will play in

monaural sound automatically.

• MTS broadcasts automatically

record in HiFi unless you select

SAP before recording. Details are

on page 50.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 50

50 Multi-ChannelTelevision Sound (cont’d)

Setting the TV/VCR/DVD to receive or

record TV programs in Stereo, Second

Audio, or Monaural Sound

STANDBY-ON PICTURE SLEEP SELECT

Because TV channels can broadcast in Stereo or Second

Audio, set the TV/VCR/DVD to receive and record the

channels in the sound mode you prefer.

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Press SETUP. Press L or M to select USER’S

SET UP. Then, press ENTER.

PLAY

STOP

– TV/VCR SETUP –

DISC

RECORD

1-3

1,4

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

DISPLAY

SETUP

ENTER

LANGUAGE [ENGLISH]

CAPTION [OFF]

TITLE

RETURN

REPEAT

ZERO RETURN

CLEAR SEARCH MODE REPEAT

TIME SEARCH

INDEX SEARCH

A-B

AUDIO SUBTITLE ANGLE

MODE

Press L or M to select TV AUDIO.

– USER'S SET UP –

RENTAL

[ON]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

VCR AUDIO

B TV AUDIO

[HIFI]

[STEREO]

Press ENTER to select STEREO, SAP (Second

Audio Program), or MONO.

Press SETUP to exit the menus.

Helpful Hint

• If you select second audio when

second audio is not available,

theTV/VCR/DVD will receive and

record normal audio.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 51

Disc Menus,Title Menus 51

Disc Menus

Some DVDs contain menus that describe the contents of

the Disc or allow you to customize Disc playback. For

example, the menu may offer choices for subtitle languages,

special features, or scene selection.

To use the DVD Disc menu and select playback features,

follow these steps.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

G Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.

+10

SPEED C.RESET

ZOOM

MUTE

Press DISC MENU.

The DVD’s Disc menu will appear.

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

Press o p s B to select an item, then press

TITLE

RETURN

REPEAT

ENTER. Continue this process to set up all the fea-

CLEAR SEARCH MODE REPEAT

tures you want or to start Disc playback.

A-B

AUDIO SUBTITLE ANGLE

MODE

Title Menus

Some DVDs have a Title Menu, which lists the Titles avail-

able on the Disc. Use the Title Menu to play a specific Title.

G Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

While Disc play is stopped, press TITLE.

VOL.

The Title Menu will appear.

+10

SPEED C.RESET

ZOOM

If a Title menu is not available, the “X” may appear

MUTE

on the TV screen. If the DVD only has a main menu

as described above, it may appear when you press

TITLE.

PLAY

STOP

DISC

RECORD

Press

p s B to select a Title, then press

DISPLAY

SETUP

ENTER

ENTER. Play will begin at the Title you selected.

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Helpful Hints

• Menus vary among Discs. Follow

the information with the DVD.

• Not all DVDs haveTitle menus.

• Some DVDs may refer to

Chapters as “scenes.” Some

DVDs may refer to theTitle

Menu as the “scene index.”

• TheTITLE button may not be

active with all DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 52

52 Fast Forward/Reverse Search

During Disc play, press and hold i/g or

STANDBY-ON PICTURE SLEEP SELECT

j/h on the remote for two seconds.

During DVD play, pressing and holding i/g or

j/h will forward or reverse the picture at

two, eight, 50, or 100 times the normal playback

speed.

CH.

+100

VOL.

+10

briefly on the TV screen to indicate reverse search-

ing. Or, 2, 8, 50, or 100 will

50, or

100 will appear

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

appear briefly on the TV screen to indicate fast for-

ward searching. Sound will be mute during searching.

G During Audio CD play, you may search only at 16

times the normal playback speed. An h 16 or

g 16 will appear briefly on the TV screen.

Sound will be intermittent during searching on an

Audio CD.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Example:

E 2

Playing a DVD in

reverse at twice

the normal

playing speed.

G During MP3 play, you can search at only eight

times the normal speed. An h 8 or g 8 will

appear briefly on the TV. Sound will be intermit-

tent during searching of MP3 Tracks.

Press PLAY B to return to normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 53

Title/Chapter Playback,Time Playback 53

Title/Chapter Playback

STANDBY-ON PICTURE SLEEP SELECT

During DVD play, press SEARCH MODE until

CH (for Chapter) or TT (for Title) appears on the

TV screen. The number of available Titles or

Chapters will appear at the right ( /4, for example).

CH.

+100

_/4

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Enter the Title or Chapter number using the

Number buttons. Precede a single-digit Title or

CLEAR SEARCH MODE REPEAT

A-B

Chapter number with a zero (01...09). The selected

AUDIO SUBTITLE ANGLE

MODE

Title or Chapter will start to play.

4 / 4

12 / 17

Time Playback

STANDBY-ON PICTURE SLEEP SELECT

During DVD or Audio CD play, press SEARCH

MODE until the Time Search display appears.

CH.

_:_ _:_ _ TOTAL 1:29:00

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

Within 30 seconds, use the Number buttons to

enter the elapsed playing time (of the current

Track or Title) at which you want play to

begin. Enter the time in hours, minutes, and sec-

onds. Within a few seconds, play will start at the

specified time.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

G Example: 1 hour, 23 minutes, and 30 seconds

1 ¡ 2 ¡ 3 ¡ 3 ¡ 0

G Make sure the time you enter is within the total

time of the current Title or Track. If it is not, the

time space will clear and play will continue at its cur-

rent point. The total time available in the current

Track or Title will appear at the right of the display

beside TOTAL.

Helpful Hint

• Title/Chapter playback is not

available with some DVDs.

G If you make a mistake entering the time, press

CLEAR to clear the time area. Enter the correct

information.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 54

54 Track Play

There are three ways to play a Track on an Audio CD. Use

the Number buttons, the SEARCH MODE button, or

i/g and j/h .

STANDBY-ON PICTURE SLEEP SELECT

G Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. Make sure an Audio

CD is in the disc tray.

CH.

A-B

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

Using the Number Buttons

Press the Number buttons to enter a Track number.

Play will start at the selected Track.

PLAY

STOP

DISC

RECORD

For single-digit Tracks (1-9), press a single Number button.

For Tracks 10 and above, press the +100/+10 button so the

Search display (TR - - ) appears on the TV. Press the Number

button of the first digit, then press the Number button of the

second digit. For example, to play Track 26, press +100/+10,

then Number 2, then Number 6.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

If you enter a Track number that is not available on the Disc,

play will not begin (or the current Track will continue to play).

Using SEARCH MODE

Press SEARCH MODE so the Track Search display

(TR) appears. Within 30 seconds, press the Number

buttons to select the Track number. Play will begin at

the selected Track. For a single-digit Track (1-9), enter a zero

first. For example, to play Track 5, press 0, 5. You do not

have to use the +100/+10 button in Search Mode for Tracks

10 and above.

Using i/g and j/E

During play, press i/g to skip the current Track

and move to the next Track. Press j/h to

return to the beginning of the current Track or to

go to previous Tracks.

Helpful Hints

• The H/h and G /g

buttons are not active when play

is stopped.

• You cannot use G /g to go

from the lastTrack on the Disc

to the firstTrack.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 55

Paused and Step-by-Step Play, Resume On 55

Paused and Step-by-Step Play

STANDBY-ON PICTURE SLEEP SELECT

During Disc play, press F (pause).

Play will pause and the sound will be mute.

CH.

When playing a DVD, press F (pause) repeat-

edly to see the picture advance one frame (or

+100

VOL.

step) at a time. The sound will remain mute.

+10

ZOOM

1-2

SPEED C.RESET

Pressing PAUSE repeatedly during Audio CD, MP3,

or JPEG play will have no effect.

MUTE

PLAY

STOP

Press PLAY B to resume play.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Resume On

You may choose to resume play from the point at which it

stopped last.

STANDBY-ON PICTURE SLEEP SELECT

Press STOP C during DVD or Audio CD play.

CH.

In a few seconds, the following Resume message will

appear on the TV screen. (The file list will appear

during MP3 or JPEG playback.)

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

Resume ON

PLAY

STOP

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

-B

Press PLAY B. In a few seconds, play will resume

AUDIO SUBTITLE ANGLE

MODE

from the point at which it stopped last.

Opening the disc tray or turning off the

TV/VCR/DVD will cancel the Resume feature. Play

will start at the beginning the next time you play the

Disc.

Or, to cancel Resume and start playing the Disc from

the beginning, press STOP C a second time while play

is stopped. The Stop symbol ( C ) will appear briefly in

the upper right corner of the TV screen. Press PLAY

B to start playing the Disc from the beginning.

Helpful Hints

• In some cases, you need to press

PLAY B while the Resume mes-

sage appears in order to resume

play from the same point.

• Resume On is not available for

MP3 or JPEG files.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 56

56 Repeat Play,A-B Repeat Play

Repeat Play

STANDBY-ON PICTURE SLEEP SELECT

During DVD or Audio CD play, press REPEAT

until the repeat mode you want appears on the TV.

On a DVD, select CHAPTER, TITLE, or OFF. On an

CH.

Audio CD, select TRACK, ALL (all Tracks on the

Disc), or OFF. With MP3 files you can select

TRACK, ALL, or GROUP (all Tracks in the current

Folder). Selecting a new Track, Chapter, or Title will

cancel repeat play.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

CHAPTER

TRACK

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

-B

Example

AUDIO SUBTITLE ANGLE

MODE

A-B Repeat Play

You can play a section of an Audio CD or DVD repeatedly.

Follow these steps to set up the section you want to play.

STANDBY-ON PICTURE SLEEP SELECT

During Disc play, press REPEAT A-B to set the

CH.

starting point (A). If you make a mistake, press

CLEAR. This will erase point A and let you start

+100

over.

OFF will appear briefly on the TV screen.

VOL.

+10

ZOOM

A –

SPEED C.RESET

MUTE

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

Play the Disc to the point at which you want

repeated play to end, then press REPEAT A-B

again. Within a few seconds, the section will begin

to play. The segment will play over and over until you

cancel the A-B Repeat feature.

-B

1-3

AUDIO SUBTITLE ANGLE

MODE

Helpful Hints

A – B

• Repeat play is not available with

some Discs.

• The entire A-B Repeat section

must be within a singleTitle or

Track. If you do not enter Point B

before the end of theTrack/Title is

reached, the end of theTrack or

Title will become Point B.

• Point B must be later on the Disc

than Point A.

To cancel A-B Repeat Play, press REPEAT A-B

• A-B Repeat is not available with

MP3Tracks.

• Stopping play will cancel A-B

Repeat Play.

OFF appears on the TV screen.

Regular play will resume.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 57

Markers 57

Use Markers to remember your favorite places on an Audio

CD or DVD. To set the Markers, follow these steps.

STANDBY-ON PICTURE SLEEP SELECT

Play the Disc to within 30 seconds prior to the point

at which you want to set the Marker. During play,

CH.

press SEARCH MODE until the Markers

appear at the top of the TV screen.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

2-4

DISPLAY

SETUP

DVD example

ENTER

TITLE

RETURN

REPEAT

Within 30 seconds, press s or B to select a

CLEAR SEARCH MODE REPEAT

A-B

Marker (1-10). Make sure _ _ _ _ : _ _ : _ _

AUDIO SUBTITLE ANGLE

MODE

3-4

appears beneath the number.

Let the Disc play to the point at which you

want to set the Marker (up to 30 seconds

away).

When the Disc reaches the point you want to

remember, press ENTER. The Title number and

elapsed playing time (DVD) or Track number and its

elapsed playing time (Audio CD) will appear.

A checkmark will replace the Marker number.

The Marker display will disappear in about 30 sec-

onds, or press SEARCH MODE again to remove the

Marker display.

Helpful Hints

• Opening the disc tray, switching

toTV/VCR mode, or turning off

theTV/VCR/DVD will erase all

the Markers.

• To erase a single Marker, press

SEARCH MODE until you see

the Markers. Press s or B to

select a Marker. Press CLEAR.

Press RETURN to remove the

display.

DVD example

Audio CD example

To return to a Marker during play, press

SEARCH MODE until you see the Markers.

Press s or B to choose the Marker you want,

then press ENTER. Disc play will continue from

the marked point.

• To erase all the Markers, press

SEARCH MODE until you see

the Markers. Press B to select

AC (All Clear), then press

ENTER. Press SEARCH MODE

or RETURN to remove the dis-

play.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 58

58 Subtitles, Camera Angles

Subtitles

You can select a language for DVD subtitles during playback.

You may select only the subtitles that are available on the

Disc.

STANDBY-ON PICTURE SLEEP SELECT

CH.

During play, press SUBTITLE to select a subti-

tle language. The number of available languages

+100

VOL.

appears at the right of the subtitle display.

+10

In the example below, six languages are available

( /6). After a few seconds, the subtitles will appear.

Or, press SUBTITLE repeatedly to turn off subtitles.

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Example:

1. ENG/6

DISC

English as first of six

available subtitles

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Camera Angles

Some DVDs contain scenes recorded from different angles.

The camera angle will not change if the DVD does not con-

tain sequences recorded from different camera angles.

STANDBY-ON PICTURE SLEEP SELECT

CH.

During play, press ANGLE to select a different

angle. The number of available angles appears at the

+100

VOL.

right of the Angle display. In this example, eight angles

+10

are available ( /8).

SPEED C.RESET

ZOOM

MUTE

Example:

Angle 1 of eight

available angles

1 / 8

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Helpful Hints

• With some DVDs, you must select

a subtitle language in the Disc

menu.

• If the desired language does not

appear after pressing SUBTITLE

several times, the Disc does not

have subtitles in that language.

• Opening the disc tray or turning

off theTV/VCR/DVD will cancel

your subtitle setting.

• If the current portion of the Disc

has multiple camera angles,

will appear on theTV screen.

ANGLE ICON must be ON.

Details are on pages 70-71.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 59

Slow Motion, Zoom 59

Slow Motion

STANDBY-ON PICTURE SLEEP SELECT

Press F (pause) during DVD play.

CH.

Press and hold i/D or H/h for two sec-

onds. Slow motion play will begin. Press and hold

i/D or H/h repeatedly during slow motion

play to play the DVD forward or backward at 1/16,

1/8, or 1/2 the normal speed.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

Example:

PLAY

STOP

1/2

Playing a DVD forward

at half the normal speed.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

-B

Press PLAY B to return to normal playback.

AUDIO SUBTITLE ANGLE

MODE

Zoom

You can enlarge the DVD picture to 1.3, two, or four times

the regular size.

STANDBY-ON PICTURE SLEEP SELECT

Press ZOOM during play.

ZOOM1 will

CH.

appear on the screen. The picture will be 1.3 times

larger. Press ZOOM again to increase the picture to

+100

VOL.

twice the regular size.

ZOOM2 will appear.

+10

ZOOM

Press ZOOM again to increase the picture to four

SPEED C.RESET

MUTE

times the regular size.

ZOOM3 will appear.

1,3

ZOOM 1

ZOOM 2

ZOOM 3

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

Zoom x1.3

Zoom x2

Zoom x4

ENTER

TITLE

RETURN

REPEAT

Press o, p, s, or B to move the zoomed

image up, down, left, or right.

CLEAR SEARCH MODE REPEAT

-B

AUDIO SUBTITLE ANGLE

MODE

Position guide example:

The Zoomed area is in

the top portion of the

overall picture.

Helpful Hints

To return the picture to its normal size, press

ZOOM repeatedly.

• The sound will be mute during

slow motion play.

• The gray box with an inner blue

box that shows during Zoomed

play is the position guide. To

remove it or show it, press ENTER.

The position of the blue box inside

the gray box indicates the position

of the zoomed image within the

overall picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 60

60 Parental Password

The Parental feature prevents viewing of DVDs that exceed

your rating limits. This feature will not limit viewing if the

DVD is not rated or coded. Check your DVDs and settings

before letting children access the TV/VCR/DVD. Follow these

steps to change your password.

G Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

Press SETUP twice while play is stopped.

MUTE

PLAY

STOP

DISC

RECORD

2-3

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press B to select CUSTOM at the top of the

menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

Press B to select

then press ENTER.

The first time you set a password, this menu will appear.

(the lock),

PARENTAL

Please enter a 4-digit password.

Press the Number buttons to enter a four-digit

password. The password will appear on the screen.

Write it down so you don’t forget it.

Press ENTER. You are finished!

Go to step 6 on the next page.

If you have set a password before, this menu will appear.

PARENTAL

Enter current password.

Press the Number buttons to enter your cur-

rent four-digit password. Asterisks ( * ) will appear

instead of your password. This protects its identity.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 61

Parental Password (cont’d) 61

Press p to select CHANGE, then press ENTER.

STANDBY-ON PICTURE SLEEP SELECT

CH.

PARENTAL

PARENTAL LEVEL ALL

CHANGE

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Press the Number buttons to enter a four-digit

password. The password numbers will appear on the

5 _{screen. Write down the password so you will not for-}

DISC

RECORD

4-5

DISPLAY

SETUP

ENTER

get it. Press ENTER. The previous menu will reap-

TITLE

RETURN

REPEAT

pear.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP to exit the menu.

Helpful Hints

• The default password is 4737.

If you forget your password,

press Number buttons 4, 7, 3, 7

at step 3. You will be prompted

to enter a new four-digit pass-

word. Use the Number buttons

to enter a new four-digit pass-

word, then press ENTER.

PARENTAL LEVEL will reset to

ALL. Press SETUP to remove the

menu. See pages 62-63 to reset

PARENTAL LEVEL as you desire.

• A power failure will not erase

your password.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 62

62 Parental Levels

Follow these steps to set the rating level for your DVDs.

DVDs whose ratings exceed the level you set will not play.

G Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SETUP twice while play is stopped.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

2-3,

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

Press B to select CUSTOM at the top of the

A-B

AUDIO SUBTITLE ANGLE

MODE

menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

Press B to select

ENTER.

(the lock), then press

PARENTAL

Enter current password.

Press the Number buttons to enter your four-

digit password. Asterisks (*) will appear instead of

your password. This protects its identity.

Press o or p to select PARENTAL LEVEL,

then press ENTER.

RATING

EXPLANATIONS

• ALL -The Parental feature is

inactive; all discs can play.

• 8 - Adult material

PARENTAL

PARENTAL LEVEL ALL

CHANGE

• 7 - NC-

children under

• 6 - R - Restricted; parental approval

17 - Not appropriate for

required for viewers under

18.

• 4 - PG

3 - Unsuitable for children

under

• 3 - PG - Parental Guidance

suggested.

•

1- G - General Audience;

recommended for all ages.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 63

Parental Levels (cont’d) 63

Press o or p to select a level, then press

STANDBY-ON PICTURE SLEEP SELECT

ENTER. The rating levels continue on two menu

screens. Press o or p repeatedly to move to the

CH.

next or previous screen to find the rating level you

want. After making your selection, the previous

menu will appear. The level you selected will appear

beside PARENTAL LEVEL.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

PARENTAL

PARENTAL LEVEL

ALL

7 [NC-17]

6 [R]

4 [PG13]

3 [PG]

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press SETUP to exit the menu.

AUDIO SUBTITLE ANGLE

MODE

Helpful Hints

• When you try to play a DVD

whose rating exceeds the level you

set, an on-screen message will indi-

cate the DVD cannot play.

Remove the DVD, then set

PARENTAL LEVEL to ALL. Reload

the DVD and begin playback.

Some DVDs may let you enter

your four-digit password to begin

playback. Follow the on-screen

messages as prompted.

• You cannot use the default pass-

word (4737) to play a DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 64

64 Audio Language, Stereo Sound

Audio Language

You can select a language for DVDs during play if multiple

languages are available.

STANDBY-ON PICTURE SLEEP SELECT

During DVD play, press AUDIO repeatedly to

CH.

choose one of the available languages. The new

audio will be heard. The display will disappear after

about five seconds.

The Audio display may show if the DVD has Dolby

Digital or multi-channel (5.1 CH) sound or show its

sampling rate (48k, for example). The number of

available languages appears after the “ / ” at the right

of the display ( /3, for example).

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

1. ENG Dolby D 5.1ch 48k/3

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Example: English audio

Stereo Sound

Adjust Stereo Sound to determine whether you will hear the

left channel, the right channel, or both channels (stereo) dur-

ing Audio CD playback.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press AUDIO during Audio CD play to choose

STEREO, L-CH, or R-CH. The display will disap-

pear in about five seconds.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

STEREO

Both right and left channels

are heard (stereo).

DISC

RECORD

DISPLAY

SETUP

ENTER

L-CH

TITLE

RETURN

REPEAT

Only the left channel is heard.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

R-CH

Only the right channel is heard.

Helpful Hints

• If a language is not available after

pressing AUDIO several times, the

DVD does not have that language.

• Some DVDs only let you change

the language in the Disc menu.

• Audio languages may be abbreviat-

ed (such as ENG for English). Or,

three dashes (- - -) may appear

instead of an abbreviation.

• You can adjust Stereo Sound only

whenVirtual Surround is OFF.

Details are on page 74.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 65

Random Play, Programmed Play 65

Random Play

You may play the Tracks of an Audio CD in Random order

instead of the order in which they are recorded (1,2,3...).

You can also use this feature for JPEG and MP3 files.

STANDBY-ON PICTURE SLEEP SELECT

CH.

While play is stopped, press MODE until the

RANDOM screen appears.

+100

VOL.

+10

RANDOM

SPEED C.RESET

ZOOM

CD [AUDIO]

TOTAL 0:45:55

MUTE

RANDOM PROGRAM

no indication

PLAY

STOP

PLAY

DISC

RECORD

DISPLAY

SETUP

Example: Audio CD

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

While the RANDOM screen appears, press

PLAY B. The Tracks will play in random order.

After all the Tracks have played once, play will stop.

A-B

AUDIO SUBTITLE ANGLE

MODE

Programmed Play

You may determine the order in which Audio CD Tracks

will play. You also can program MP3 or JPEG files to play in

a special order. To set a Program, follow these steps.

STANDBY-ON PICTURE SLEEP SELECT

CH.

While play is stopped, press MODE until the

PROGRAM screen appears.

+100

VOL.

+10

ZOOM

SPEED C.RESET

PROGRAM

MUTE

CD [AUDIO]

TOTAL 0:00:00

3:30

4:30

5:00

3:10

5:10

1:30

2:30

PLAY

STOP

DISC

1/2

1/1

RECORD

PLAY

CLEAR

3:30

DISPLAY

SETUP

ENTER

Audio CD example

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press o or p to select a track you want to

play, then press ENTER. Press CLEAR to erase

the last Track in the Program if you make an error.

Additional Tracks may be on other screens.

Press p or o to see all the Tracks.

Repeat this step until you have selected all the Tracks

you wish to play in the Program. A Program can have

a maximum of 99 Tracks.

AUDIO SUBTITLE ANGLE

MODE

Helpful Hints

• You cannot use the Number but-

tons or SEARCH MODE to select

anotherTrack while playing a

Program. Press i /g or

j/h to select otherTracks

in the Program.

Press PLAY B. The Tracks will play once in the

order you set. Turning off the TV/VCR/DVD, switch-

ing the unit to TV/VCR mode, or opening the disc

tray will erase the Program. You can start Program

play only while in the PROGRAM screen.

• You cannot combine random play

with programmed play.

• You may play a Program or a

Track within a Program repeatedly.

During programmed play, press

REPEAT so ALL (allTracks in the

Program) orTRACK appears.

• You cannot alter a Program during

play.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 66

66 MP3/JPEG Playback

The DVD Player will play MP3 or JPEG files that you record

and finalize on a CD-RW (Compact Disc-Rewritable) or

CD-R (Compact Disc-Recordable).

STANDBY-ON PICTURE SLEEP SELECT

These Discs may contain pictures in a JPEG format or audio

Tracks in an MP3 format. For example, you may have photo-

graphic film developed by a retailer that places the pictures

on a CD-R for you. These pictures may be in JPEG format.

Or, you may copy or download MP3 music files from certain

legal Internet sites, then copy those files onto a CD-R or

CD-RW.

You cannot make or record such Discs using the

TV/VCR/DVD. See your computer manual for details on

recording.

Keep these characteristics in mind when making Discs you

intend to play on the DVD Player of the TV/VCR/DVD.

G Record MP3 Tracks at a sampling frequency of 44.1 kHz

or 48 kHz. Use a bit rate between 112 kbps and 320 kbps.

G When recording JPEG Files, the size of the picture should

be between 32 x 32 and 6300 x 5100 dots.

CH.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

DISC

RECORD

1-2

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

G Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.

When you put a CD-RW or CD-R with MP3 or JPEG

files in the Player, play may begin automatically.

Or, the File List may appear on the TV screen. Press

o or p to select a Folder, MP3 Track, or JPEG

File.

If you choose a Track or File, press PLAY B or

ENTER. Starting with the Track or File you selected,

the Tracks/Files will play in the order they were

recorded, i.e. 1, 2, 3.

If you select a Folder and press ENTER, the

Tracks or Files within that Folder will appear.

Press K or L to select the Track or File you

Helpful Hints

• JPEG images and MP3Tracks are

known as Files. Groups of Files

are called Folders.

want, then press PLAY

or ENTER.

G Choose FIRST PLAY to start play from the first

individual File or Track listed.

G Press TITLE to return to the first item on the first

MP3 or JPEG screen. You also can press { to

return to previous screens.

• JPEG Files have the

icon.

• A maximum of 255 Folders can

be recognized.A maximum of

256 Files can be recognized.

• MP3 Files have the

icon.

G During JPEG playback, press MODE until you see

JPG 1 or JPG 2. Then, within five seconds, press

ENTER to switch between JPG 1 and JPG 2. If you

choose JPG 1, the images will cut in and out sharply

as play progresses. If you choose JPG 2, the images

will fade in and out as play progresses. For example,

File 1 will fade out, then File 2 will appear, gradually

“fading in.”

• During play, press the Number

buttons to select anotherTrack.

Or, press i /g or

j/h to changeTracks. If a

Track is not available,“X” will

appear on theTV screen. Play

may resume at an incorrect

Track or may continue with its

currentTrack.

• SpecificTime playback is not

possible with MP3Tracks.

• To see the File List during play,

press SEARCH MODE.The cur-

rentTrack or File will be high-

lighted.

To stop play, press STOP C.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 67

MP3/JPEG Displays 67

You can review MP3 and JPEG Track (File) information dur-

ing playback.

STANDBY-ON PICTURE SLEEP SELECT

Press DISPLAY until the current Track/File number,

total Tracks/Files available, and elapsed playing time

CH.

of the current Track appear. The elapsed playing time

will not show during JPEG play.

+100

VOL.

+10

2 / 25 0:01:15

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

The following may appear to indicate Repeat play.

T: The current Track will play repeatedly.

ENTER

1-2

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

G: Tracks in the current Folder (Group) will play

repeatedly.

A: All Tracks on the Disc will play repeatedly.

Press DISPLAY again to remove the display.

Helpful Hints

• During MP3 playback, the

icon and the currentTrack name

will appear when you first press

DISPLAY.

• During JPEG play, the

icon and the current

File name will appear when you

first press DISPLAY.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 13:07 Page 68

68 Language Settings

You can use the LANGUAGE settings to select different lan-

guages for the Audio or Subtitles of DVDs, as well as languages

for DVD Disc menus.

STANDBY-ON PICTURE SLEEP SELECT

G Before you begin, press SELECT to put the

CH.

TV/VCR/DVD in DVD mode.

While play is stopped, press SETUP twice. The

+100

VOL.

QUICK SETUP screen appears.

+10

ZOOM

SPEED C.RESET

MUTE

QUICK SETUP

PLAY

STOP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

DISC

RECORD

2-4

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press B to select CUSTOM at the top of the

CLEAR SEARCH MODE REPEAT

A-B

menu, then press ENTER.

AUDIO SUBTITLE ANGLE

MODE

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

The Language menu (

) will be selected. Press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

Press o or p to select AUDIO, SUBTITLE, or DISC

MENU. Then, press ENTER. The language options for

the selected item will appear.

AUDIO:

The DVD’s audio plays

in the selected language.

LANGUAGE

AUDIO

ORIGINAL

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

SWEDISH

SUBTITLE:

Subtitles appear

in the chosen language.

Helpful Hints

LANGUAGE

• If the DVD’s default settings for

Audio and Subtitle are the same

language, the subtitles may not

show unless you turn them on.

• Use the AUDIO and SUBTITLE

buttons to select Audio and

Subtitles available on the DVD.

Details are on pages 58 and 64.

• If you set AUDIO to ORIGINAL,

the default setting of the DVD

Audio will play.

SUBTITLE

OFF

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

SWEDISH

DISC MENU:

A DVD’s Disc menu

appears in the

LANGUAGE

DISC MENU

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

chosen language.

SWEDISH

DUTCH

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 69

Language Settings (cont’d) 69

Press o or p to select a language, then press

ENTER. The language lists may continue on multi-

ple screens. Press o or p to move to the other

screens.

GIf you select OTHER, press four Number buttons

to enter the code for the language you desire. Use

the Language Codes below. The language or language

code you select will appear in the Language menu

beside AUDIO, SUBTITLE, or DISC MENU.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

LANGUAGE

LANGUAGE CODE

Please enter a 4-digit language code.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

GYou can select other languages only if the language

is available on the Disc. If the language is not record-

ed on the DVD, changing these settings will have no

effect.

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP to exit the menu.

Language Codes

A-B

English

5160 Kannada

5161 Kashmiri

5166 Kazakh

5760 Panjabi

6247

Abkhazian

4748 Esperanto

4747 Estonian

5765 Pashto

5757 Persian

6265 Tagalog

5247 Tajik

6258 Tamil

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

4752

F-H

Kinyarwanda 6469 Polish

6563 Faroese

4759 Fiji

4764 Finnish

5471 French

4765 Frisian

5261 Kirghiz

5256 Kirundi

5255 Korean

5264 Kurdish

5271

5771 Portuguese 6266 Tatar

6460 Pushto

5761 Quechua

6265 Telugu

6367 Thai

5767 Rhaeto-Romance 6459 Tibetan

L-N

Romanian

5861 Russian

5847

6461 Tigrinya

6467 Tonga

Tsonga

4771 Gaelic (Scots) 5350 Laothian

Azerbaijani 4772 Galician

5358 Latin

Bangla

4860 Georgian

4847 German

5167 Greek

5747 Latvian

5051 Lettish

5158 Lingala

5868

Turkish

Bashkir

Basque

Bengali

Bhutani

Bihari

5868 Samoan

5860 Sangho

5866 Sanskrit

6559 Turkmen

6553 Twi

6547

4860 Greenlandic 5758 Lithuanian

U-Z

5072 Guarani

4854 Gujarati

4855 Hausa

4864 Hebrew

4853 Hindi

5971 Hungarian

5360 Macedonian 5957 Serbian

5367 Malagasy

5447 Malay

6564 Ukrainian

Urdu

6757

6764

6772

5953 Serbo-Croatian

5965

5958 Sesotho

5966 Setswana

5955 Shona

5964 Sindhi

5961 Singhalese

5960 Siswat

6047 Slovak

6051 Slovenian

Bislama

Breton

Bulgarian

Burmese

6554 Uzbek

5569 Malayalam

5455 Maltese

5467 Maori

I-K Marathi

6566 Vietnamese 6855

6660 Volapuk

6560 Welsh

6550 Wolof

6555 Xhosa

6565 Yiddish

6557 Yoruba

6558 Zulu

6561

6861

4971

6961

7054

5655

7161

7267

Byelorussian 4851

C-E

Icelandic

5565 Moldavian

5560 Mongolian

5547 Nauru

5551 Nepali

Cambodian 5759 Indonesian

Catalan

Chinese

Corsican

Croatian

Czech

4947 Interlingua

7254 Interlingue

4961 Inupiak

5464 Irish

4965 Italian

5047 Japanese

6058 Javanese

5557 Norwegian 6061 Somali

5347

O-R

Spanish

6149 Sundanese

6164 Swahili

5165

5566 Occitan

5647 Oriya

6567

Danish

Dutch

6569

5669 Oromo (Afan)6159 Swedish

6568

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 70

70 Display Settings

You can adjust TV Mode, Angle Icon, and Automatic Power

Off in the Display menu.

G Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.

STANDBY-ON PICTURE SLEEP SELECT

CH.

When play is stopped, press SETUP twice.

The QUICK SETUP screen will appear.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

PLAY

STOP

DISC

RECORD

2-3

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press B to select CUSTOM at the top of the

CLEAR SEARCH MODE REPEAT

menu, then press ENTER.

A-B

AUDIO SUBTITLE ANGLE

MODE

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

Press B to select

ENTER.

(DISPLAY), then press

DISPLAY

TV MODE

ANGLE ICON

4:3 LETTER BOX

AUTO POWER OFF ON

Helpful Hints

• Selecting a differentTV MODE

setting is only effective if it is

available on the DVD. Check the

DVD Disc menu or case for

details.

• You also can adjustTV MODE in

the QUICK SETUP menu.With

QUICK selected, press ENTER.

TV MODE will be selected, so

press ENTER. Press o or p to

choose a setting, then press

ENTER. Press SETUP to remove

the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 71

Display Settings (cont’d) 71

Press o or p to select an item, then press

ENTER.

STANDBY-ON PICTURE SLEEP SELECT

G If you selected TV MODE, press o or p to

select a setting, then press ENTER.

CH.

Choose 4:3 LETTER BOX if you want to see the

entire, widened picture with black bars at the top and

bottom of the screen. This looks like the picture you

see when watching movies in a theater. This setting is

possible only if the DVD was recorded in the letter-

box or widescreen format.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Choose 4:3 PAN & SCAN for a full height picture,

with both sides trimmed. Some companies refer to

this as reformatting the picture to fit your TV screen

and may call it the regular or normal format.

G If you selected ANGLE ICON, press ENTER

repeatedly to turn ANGLE ICON ON or OFF. The

default setting is ON. Choose ON to see the Angle

icon when multiple camera angles are available during

DVD play. Details are on page 58. Choose OFF to

disable the Angle icon.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

G If you selected AUTO POWER OFF, press

ENTER repeatedly to set AUTO POWER OFF to

ON or OFF. The default setting is ON. Choose ON

if you want the TV/VCR/DVD to turn off when there

is no activity in DVD mode for 20 minutes.

DISPLAY

TV MODE

4:3 LETTER BOX

4:3 PAN & SCAN

DISPLAY

OFF

TV MODE

ANGLE ICON

4:3 LETTERBOX

AUTO POWER OFF ON

TV MODE

ANGLE ICON

DISPLAY

TV MODE

ANGLE ICON

4:3 LETTERBOX

AUTO POWER OFF ON

AUTO POWER OFF

Press SETUP to exit the menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 72

72 Audio Settings

Change Audio settings based on other equipment you con-

nected to the TV/VCR/DVD or according to your Disc

sound features.

STANDBY-ON PICTURE SLEEP SELECT

G Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.

CH.

While play is stopped, press SETUP twice. The

+100

VOL.

QUICK SETUP screen will appear.

+10

ZOOM

SPEED C.RESET

MUTE

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

PLAY

STOP

DISC

RECORD

2-5

1,6

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press B to select CUSTOM at the top of the

CLEAR SEARCH MODE REPEAT

A-B

menu, then press ENTER.

AUDIO SUBTITLE ANGLE

MODE

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

Press B to select AUDIO (

ENTER.

) , then press

Press o or p to select DRC, DOLBY DIGI-

TAL, or DOWN SAMPLING, then follow step

5 accordingly.

G If you selected DRC, press ENTER repeatedly to

turn Dynamic Range Control (DRC) ON or OFF.

Choosing ON compresses the range of volume by sup-

pressing loud sounds and raising low sounds.

G If you selected DOLBY DIGITAL, press ENTER

repeatedly to select ON or OFF. Select ON if you

used the COAXIAL DIGITAL AUDIO OUT jack to

connect the TV/VCR/DVD to a stereo that is Dolby

Digital compatible. Details are on page 10. Otherwise,

choose OFF.

Helpful Hints

G If you selected DOWN SAMPLING, press ENTER

repeatedly to choose ON or OFF. Choose ON to set

downsampling to 48 kHz. Choose OFF to set down-

sampling to 96 kHz.

• Dolby Digital sound must be

available on the DVD.

• You can adjust DOLBY DIGITAL

in the QUICK SETUP menu.With

QUICK selected, press ENTER.

Press p to select DOLBY DIGI-

TAL. Press ENTER to choose ON

or OFF. Press SETUP to remove

the menu.

AUDIO

DRC

DOLBY DIGITAL

AUDIO

DRC

DOLBY DIGITAL

DOWN SAMPLING ON

AUDIO

DRC

DOLBY DIGITAL

OFF

DOWN SAMPLING ON

• When you play a Disc that has

pling will be at 48 kHz, even if

DOWN SAMPLING is OFF.

DRC

Dolby Digital

Down Sampling

Press SETUP to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 73

On-Screen Displays 73

DVD Display

STANDBY-ON PICTURE SLEEP SELECT

Press DISPLAY repeatedly to see the following

displays during DVD play.

CH.

CH 7/49 0:01:46 - 0:03:27

Elapsed playing time

of the current Chapter;

remaining playing time

of the current Chapter

CH (Chapter):

Current Chapter number

/ total Chapters

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

TT 1/2 0:00:00 - 1:23:45

TT (Title):

Current Title number

/ Total Titles

Elapsed playing time of the

current Title; remaining playing

time of the current Title

DISC

RECORD

DISPLAY

SETUP

ENTER

1-2

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

BIT RATE: The amount of audio

and video data currently being read.

A-B

C L0

AUDIO SUBTITLE ANGLE

MODE

Layer number, appears

only when playing a

two-layered Disc.

L0: Layer 0 is playing

L1: Layer 1 is playing

Current Repeat setting, if active

C: Chapter repeat

T: Title repeat

B: A-B repeat

Press DISPLAY repeatedly or press RETURN

to remove the display.

Audio CD Display

STANDBY-ON PICTURE SLEEP SELECT

Press DISPLAY repeatedly to see the following

displays during Audio CD play.

CH.

TR 4/12 0:03:21 - 0:02:15

TR (Track):

Current Track number

/ total Tracks

+100

Elapsed playing time

of the current Track;

remaining playing time

of the current Track

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

ALL 4/12 0:13:45 - 0:45:40

Current Repeat setting, if active

T: Track repeat

A: All Tracks repeat

DISC

ALL:

RECORD

Current track number

/ total Tracks

B: A-B repeat

DISPLAY

SETUP

ENTER

Elapsed playing time

of the current Audio CD;

remaining playing time of

the current Audio CD

1-2

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press DISPLAY repeatedly or press RETURN

to remove the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 74

74 Black Level,Virtual Surround

Black Level

Adjust Black Level to brighten the DVD picture.

STANDBY-ON PICTURE SLEEP SELECT

During DVD play, press MODE so the Black

Level icon shows in the top left corner of the TV

CH.

screen.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Within 10 seconds, press ENTER to choose

DISC

RECORD

ON or OFF. ON brightens the dark parts of the

picture. OFF shows the original picture as recorded.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Virtual Surround

You can enjoy improved stereo sound when you play DVDs,

Audio CDs, or MP3 files recorded in Dolby Digital or Pulse

Code Modulation (PCM). Check the Disc case for details

on availability.

STANDBY-ON PICTURE SLEEP SELECT

CH.

During Disc play, press MODE so the Virtual

+100

VOL.

Surround icon appears in the top left corner of the

+10

SPEED C.RESET

TV screen.

ZOOM

MUTE

While the Virtual Surround icon appears,

PLAY

STOP

press ENTER to choose 1, 2, or OFF.

DISC

The default setting is OFF.

RECORD

The icon will disappear after about 10 seconds.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

OFF

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Helpful Hint

• Virtual Surround is available only

if you set Stereo Sound to

Stereo. Details are on page 64.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 75

Glossary 75

AUDIO In Jacks: red and white jacks on the front of the TV/VCR/DVD

which are used to receive or record audio from another source (VCR,

Camcorder, etc.).

Automatic Channel Setup: process in which the TV/VCR/DVD memo-

rizes all available TV channels. Then, when you push the CH. L/M buttons,

you only scan through channels you receive.

Auxiliary (AUX): The channel to which you set your TV/VCR/DVD during

dubbing or when viewing material that is playing on another device that is

connected to the TV/VCR/DVD (for example, a Camcorder or VCR or TV

channels from a Cable Box/Satellite Receiver). Press SELECT to choose AUX

at the TV/VCR/DVD.

Bands: settings that allow you to tune channels.

• Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high

frequency; channels 14-69).

• Cable – standard channels can be received without a Cable Box.

Brightness: adjusting increases or decreases the brightness of the color on

the screen.

COAXIAL Digital Audio Out jack: Sends digital audio to a stereo,

allowing you to adjust the volume at the stereo.

Color: adjusting pales or brightens the TV/VCR/DVD picture color.

Dolby Digital: A surround sound system that provides 5.1 channel sound as

used in movie theaters. Sound is heard through multiple channels, not just the

right and left as with standard stereo.

Dubbing: copying a videotape from a separate VCR or camcorder.

HQ: high quality; a feature in the VCR circuitry which provides enhanced

videotape picture detail through the TV/VCR/DVD.

OTR: One-Touch Recording; a timed recording that starts immediately and

records for 30 minutes to eight hours, whichever you specify.

Sharpness: adjusting softens or clarifies the picture on the screen.

Tape Speeds: how fast the videotape travels during playback or recording.

The faster the tape speed, the better the recording quality will be. Faster

speeds (SP) also use more space on the tape. So, you can put more recording

on a tape if you use a slower tape speed (SLP).

• SP (standard play) – fastest tape speed (recording time for a T120 tape is

approximately two hours); best picture quality.

• LP (long play) – average tape speed; only playback in this speed is available

on this TV/VCR/DVD.

• SLP (super long play) – slowest tape speed (recording time for a T120

tape is approximately six hours).

Tint: adjusting changes the tints of the picture from purple to green.

VIDEO In Jack: yellow jack on the front of the TV/VCR/DVD which is used

to receive or record video from another source (VCR, Camcorder, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 76

76 Helpful Hints

If you are having problems with your product, check this list of problems and possible solutions before

requesting service. You may be able to solve the problem yourself.

Location

For safe operation and satisfactory performance of your TV/VCR/DVD, remember the following:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom

of the TV/VCR/DVD. Do not place the TV/VCR/DVD on a carpet, as this will block the ventilation

openings.

• Avoid locations subject to strong vibrations.

• Do not place the TV/VCR/DVD near strong magnetic fields.

• Do not move the TV/VCR/DVD from a cold place to a hot place, or vice versa.

Electrical Shock and Fire Hazards

• Do not handle the power cord with wet hands.

• Do not pull the power cord when disconnecting the TV/VCR/DVD from the AC (alternating current)

wall outlet. Grasp it by the plug.

• If you spill water on the TV/VCR/DVD, unplug the power cord immediately and take the TV/VCR/DVD

to an authorized service center.

• Do not put your fingers or objects into the cassette compartment or disc tray.

• Do not place anything on top of the TV/VCR/DVD.

Dew Warning (Moisture Condensation)

• Moisture may condense inside the unit when you move it from a cold place to a warm place, after heat-

ing a cold room, or when the humidity is high. There is no warning that moisture is in your

TV/VCR/DVD. Playing a tape when moisture has accumulated could damage the tape and the

TV/VCR/DVD. If you suspect moisture inside the TV/VCR/DVD, keep the power on (but do not play a

tape) for at least two hours. This will allow the TV/VCR/DVD to dry.

TV/VCR/DVD will not perform a timer recording.

• Set the recording start and stop times correctly. Details are on pages 28-31.

Midnight is 12 a.m. Noon is 12 p.m.

• Make sure the TV/VCR/DVD power is off for the timer recording.

• Set the clock. Details are on pages 20-23.

• Put a videotape in the cassette compartment of the TV/VCR/DVD. The tape must have a record tab.

Details are on page seven.

• If the power fails, timer recordings will be restored when you reset the clock. Timer recordings do not

occur if set to take place during the power failure.

TV/VCR/DVD will not record on a videotape.

• Make sure the videotape has a record tab. Details are on page seven.

• Plug the power cord into an active AC outlet. Details are on page nine.

• Check your hookups. Details are on pages eight-nine.

• Set up the TV channels. Details are on page 18.

• You cannot record DVDs onto a videotape using the TV/VCR/DVD.

Channel reception is poor.

• Check connections, then set up the channels again. Details are on page 18.

TV/VCR/DVD has no power.

• Connect the power plug to an AC (alternating current) outlet completely.

TV/VCR/DVD ejects the tape when you try to start a recording.

• Make sure the tape has a record tab. Details are on page seven.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 77

Helpful Hints (cont’d) 77

Disc cannot play.

• Insert a playable Disc. Make sure the Disc is labelled for Region 1 or ALL regions and is NTSC compatible.

Details are on page six.

• Place the Disc correctly in the Disc tray. If the Disc is one-sided, place the Disc in the tray with the label fac-

ing up. If the Disc is two-sided, make sure the label of the side you want to play is facing up.

• Clean the Disc. Make sure the Disc is not scratched or warped.

• Cancel the Parental Controls, enter the password, or change the Parental level. Details are on pages 60-63.

TV/VCR/DVD does not have a picture.

• Adjust the antenna or check the Cable TV or satellite signal connection. If using a Cable Box/Satellite

Receiver, set the TV/VCR/DVD to channel 3, 4, or AUX. Details are on pages eight-nine.

• Adjust the picture controls. Details are on page 25.

• Select an active TV channel. Details are on pages 18-19.

• Make sure the Disc is compatible with the DVD Player of the TV/VCR/DVD. Details are on page six.

TV/VCR/DVD has poor sound or no sound.

• Press VOL. K/L to adjust the volume. Press MUTE to restore the volume.

• Check the audio settings for DVD mode. Details are on page 72.

• Check the audio settings of the Disc. For example, you may have selected “soundtrack” playback or an

unavailable sound setting (such as Dolby Digital) or language. Details are on pages 64, 68-69, and 72. Try other

sound options provided in the DVD Disc menu.

You cannot choose a DVD feature, such as camera angle or audio or subtitle language.

• The feature must be recorded on the DVD. Not all DVDs contain multiple angles, subtitles, etc. Refer to the

Disc case to see what features are available. If the feature is not available, the “X” may appear in the top right

corner of the screen.

Videotape play is poor or the tape is destroyed.

• Adjust the tracking. Details are on page 40.

• Use the Rental feature. Details are on page 35.

• If moisture has accumulated in the unit, keep the power on for at least two hours, but do not play a tape.

TV/VCR/DVD does not display closed captions for TV programs.

• Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper.

Remote control does not operate the TV/VCR/DVD.

• Aim the remote control directly at the remote sensor on the front of the TV/VCR/DVD.

Details are on page 16.

• Remove all obstacles between the remote control and the TV/VCR/DVD.

• Inspect and replace the batteries in the remote control. Details are on page seven.

Number buttons will not select channels above 69.

• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, press the

+100/+10 button, then the Number buttons for the last two digits. Details are on page 11.

• If you are using an antenna and do not have Cable TV/Satellite, only channels 2-69 will be available.

You cannot insert a tape into the cassette compartment of the TV/VCR/DVD.

• Insert the tape with the window facing up and the record tab facing you and on the left.

• Make sure a tape isn’t already inside by pressing STOP/EJECT CA on the front of the TV/VCR/DVD.

• Gently push on the center of the tape. Never force a tape into the TV/VCR/DVD.

• If you have set a timer recording and the power is off, the unit will eject the tape if the record tab is missing.

You cannot remove the tape from the TV/VCR/DVD.

• Make sure the power plug is completely connected to an AC (alternating current) outlet.

• If a timer recording is programmed, turn on the TV/VCR/DVD power, then eject the tape. Be sure to insert a

tape and turn off the TV/VCR/DVD power for the timer recording.

• Unplug the TV/VCR/DVD power cord for five minutes. Then, plug in the power cord again, then press

STANDBY-ON on the TV/VCR/DVD. If the tape does not eject, press STOP/EJECT CA on the

TV/VCR/DVD three to five times. If the tape still does not eject, an authorized servicer may need to remove

the tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 78

78 Specifications

General TV/VCR

CRT:

Electrical Specifications

Sound output:

Two speakers, 1W, 8 ohm

19MDTR20:

19 inch in-line gun,

90˚ deflection tube

27 inch in-line gun,

110˚ deflection tube

Other Specifications

Terminals

27MDTR20:

Antenna In:

VHF/UHF/Cable TV

Closed Caption system: §15.119/FCC

75 ohm unbalanced (F-type)

One RCA connector

Two RCA connectors

1/8” stereo (3.5 mm)

Video Heads:

Tape width:

Tape speeds

Rotary four-head

1/2 inch

Video In:

Audio L/R In:

Headphone:

Coaxial Digital

Audio Out:

33.40 mm/sec.

16.67 mm/sec.

11.12 mm/sec.

2-69

SLP

One pin jack,

500m Vpp (75 ohm)

Two RCA connectors

Tuner channels:

Cable TV:

Audio L/R Out:

Operating

1-125

temperature:

41ºF-104ºF (5ºC-40ºC)

General DVD

Color System:

Power requirements: AC 120V, 60Hz

NTSC

Frequency response:

DVD (linear sound) 20 Hz to 22 kHz

(sample rate: 48 kHz)

19MDTR20:

Power consumption

(Maximum):

Dimensions:

90W

20 Hz to 44 kHz

(sample rate: 96 kHz)

Height: 19-11/16” (500 mm)

Width: 23-13/16” (605 mm)

Depth: 18-11/16” (474 mm)

48.5 lbs (22 kg)

Audio CD

Signal-to-noise ratio:

Audio CD

20 Hz to 20 kHz

100 dB (EIAJ)

Weight:

Dynamic range:

DVD (linear sound): 85 dB

27MDTR20:

Power consumption

(Maximum):

Audio CD:

84 dB (EIAJ)

125W

Total distortion factor

Audio CD:

Dimensions:

Height: 25-1/2” (648 mm)

Width: 26-9/16” (675 mm)

Depth: 19-11/16” (500 mm)

86 lbs (39 kg)

0.07% (EIAJ)

Wow and flutter:

Below the measurement

limitation (+/-0.001%

W PEAK) (EIAJ)

Weight:

Accessories:

Remote Control with two

AA batteries

Owner’s Manual

Designs and specifications are subject to change without notice and without our legal obligation.

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 79

Limited Warranty 79

TV/VCR/DVD COMBINATION

90 Days Free Labor/OneYear Parts Exchange

The 27MDTR20 can be repaired in-home.

The 19MDTR20 should be carried in for repair.

WHO IS COVERED?

attempt to provide service (although there may be a

You must have proof of purchase to receive warranty delay if the appropriate spare parts and technical

service. A sales receipt or other document showing

that you purchased the product is considered proof

of purchase.

manual(s) are not readily available).

MAKE SURE YOU KEEP...

Please keep your sales receipt or other document

showing proof of purchase. Attach it to this owner’s

manual and keep both nearby. Also keep the original

box and packing material in case you need to return

your product.

WHAT IS COVERED?

Warranty coverage begins the day you buy your

product. For 90 days thereafter, all parts will be

repaired or replaced free, and labor is free. From 90

days to one year from the day of purchase, all parts

will be repaired or replaced free, but you pay for all

labor charges. After one year from the day of pur-

chase, you pay for the replacement or repair of all

parts, and for all labor charges.

BEFORE REQUESTING SERVICE...

Please check your owner’s manual before requesting

service. Adjustments of the controls discussed there

may save you a service call.

All parts, including repaired and replaced parts, are

covered only for the original warranty period. When

the warranty on the product expires, the warranty on

all replaced and repaired parts also expires.

TO GET WARRANTY SERVICE IN U.S.A.,

PUERTO RICO, OR U.S. VIRGIN ISLANDS...

Take the product to a Magnavox factory service cen-

ter (see enclosed list) or authorized service center

for repair. When the product has been repaired, you

must pick up the unit at the center. Centers may

keep defective parts.

(In U.S.A., Puerto Rico, and U.S. Virgin Islands, all

implied warranties, including implied warranties of

merchantability and fitness for a particular purpose,

are limited in duration to the duration of this express

warranty. But, because some states do not allow limi-

tations on how long an implied warranty may last,

this limitation may not apply to you.)

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the prod-

uct, adjustment of customer controls on the prod-

uct, and installation or repair of antenna systems

outside of the product.

• product repair and/or part replacement because of

misuse, accident, unauthorized repair or other

cause not within the control of Magnavox.

• reception problems caused by signal conditions or

cable or antenna systems outside the unit.

• a product that requires modification or adaptation

to enable it to operate in any country other than

the country for which it was designed, manufac-

tured, approved and/or authorized, or repair of

products damaged by these modifications.

• incidental or consequential damages resulting from

the product. (Some states do not allow the exclu-

sion of incidental or consequential damages, so the

above exclusion may not apply to you. This

includes, but is not limited to, prerecorded materi-

al, whether copyrighted or not copyrighted.)

• damage caused by the use of non-VHS tapes or

tapes that have not been tested and labeled for

use in two, four, six, and eight hour VHS

recorders.

TO GET WARRANTY SERVICE IN CANADA...

Please contact Magnavox at:

1-800-705-2000.

(In Canada, this warranty is given in lieu of all other

warranties. No other warranties are expressed or

implied, including any implied warranties of mer-

chantability or fitness for a particular purpose.

Magnavox is not liable under any circumstances for

any direct, indirect, special, incidental or consequen-

tial damages, howsoever incurred, even if notified of

the possibility of such damages.)

REMEMBER...

Please record below the model and serial numbers

found on the product. Also, please fill out and mail

your warranty registration card promptly. It will be

easier for us to notify you if necessary.

• a product that is used for commercial or institu-

tional purposes.

MODEL # __________________________________

SERIAL # __________________________________

WHERE IS SERVICE AVAILABLE?

Warranty service is available in all countries where

the product is officially distributed by Magnavox. In

countries where Magnavox does not distribute the

product, the local Magnavox service organization will

This warranty gives you specific legal rights.You may have

other rights which vary from state to state.

Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171

EL6556E001 / 03-03

Download from Www.Somanuals.com. All Manuals Search And Download.

19MDTR20(50-80).QX33 03.3.28 11:59 Page 80

80 Index

a-b repeat . . . . . . . . . . . . . . . . . .56 helpful hints . . . . . . . . . . . . . .76-77 reverse searching . . . . . . . . . .39, 52

angle button . . . . . . . . . . . . . .15, 58 hookups . . . . . . . . . . . . . . .8-10, 33 rf coaxial cable . . . . . . . . . . . . . . . .8

ant(enna) jack . . . . . . . . . . . .8-9, 17

arrow buttons . . . . . . . . . . . . . . .14 language (dvd) . . . . . . . . . .64, 68-69 safety precautions . . . . . . . . . . . . .3

audio button . . . . . . . . . . . . .15, 64 language (setup menus) . . . . . . . .18 search mode button . .15, 53-54, 57

audio cd . . . . . . . . . . . . . . . . . .6, 54 language settings . . . . . . . . . . .68-69 searching . . . . . . . . . . . . . . . .39, 52

audio in/out jacks . .9-10, 16-17, 33 lp (long play) . . . . . . . . . . . . .26, 75 second audio program . . . . . .48, 50

audio settings (dvd) . . . . . . . . . . .72

select button . . . . . . . . . . . . . . . .14

auto return . . . . . . . . . . . . . . . . .32 menus . . . . . . . . . . . . . . . .5, 18, 51 setup button . . . . . . . . . . . . . .5, 15

automatic rewind, eject . . . . . . . .40 mode button . . . . . . . . . .15, 65, 74 sharpness . . . . . . . . . . . . . . . . . . .25

auxiliary mode (aux) . . . .8-9, 11, 33 mp3 display . . . . . . . . . . . . . . . . .67 sleep button . . . . . . . . . . . . . .14, 36

mp3 playback . . . . . . . . . . . . . . . .66 sleep timer . . . . . . . . . . . . . . . . . .36

batteries . . . . . . . . . . . . . . . . . . . . .7 mp3 track selection . . . . . . . . . . .66 slow motion . . . . . . . . . . . . . .39, 59

black level . . . . . . . . . . . . . . . . . .74 mts system . . . . . . . . . . . . . . .48-50 slp (super long play) . . . . . . . .26, 75

brightness . . . . . . . . . . . . . . . . . .25 mute button . . . . . . . . . . . . . . . .15 sp (standard play) . . . . . . . . .26, 75

specifications . . . . . . . . . . . . . . . .78

c.reset button . . . . . . . . .15, 31, 36 number buttons . . . . . . . . . . . . . .14 speed button . . . . . . . . . . . . .15, 26

camera angle . . . . . . . . . . . . . . . .58

standby-on button . . . . . . . . .14, 16

cassette compartment . . . . . . . . .16 on-screen status displays . . . .25, 73 status display . . . . . . . . . . . . .25, 73

channel

one-touch recording . . . . . . . . . .27 stereo broadcast recording . .48-50

above 100 . . . . . . . . . . . . . . . .14 open/close button A . . . . . . . . . .16 still picture . . . . . . . . . . . . . . .39, 55

adding/deleting . . . . . . . . . . . .19 output button . . . . . . . . . . . . . . .16 stop C button . . . . . . . . . . . . . . .14

setup . . . . . . . . . . . . . . . . . . . .18

stop/eject CA button . . . . . .12, 16

o/p buttons . . . . .11, 15-16, 40 parental controls . . . . . . . . . .60-63 subtitle button . . . . . . . . . . . .15, 58

chapters . . . . . . . . . . . . . . . . . . . .53 password . . . . . . . . . . . . . . . .60-61 super high speed searching . . . . .39

clear button . . . . . . . . . . . . . . . . .15 (pause) k button . . . .14, 39, 55, 59

clock setting . . . . . . . . . . . . . .20-23 picture controls . . . . . . . . . . . . . .25 table of contents . . . . . . . . . . . . . .4

closed captions . . . . . . . . . . . . . .41 picture button . . . . . . . . . . . .14, 25 tape duplication . . . . . . . . . . . . . .33

coaxial digital audio out jack .10, 17 play B button . . . . . . . . .12-14, 16 tape eject . . . . . . . . . . . . . . . .16, 77

color . . . . . . . . . . . . . . . . . . . . . .25 playing discs . . . . . . . . . . . . . . . . .13 tape speed . . . . . . . . . . . . . . .26, 75

connections . . . . . . . . . . . .8-10, 33 playing videotapes . . . . . . . . . . . .12 time search . . . . . . . . . . . . . . . . .37

contents, table of . . . . . . . . . . . . . .4 power cord . . . . . . . . . . . . . . .9, 17 time setting . . . . . . . . . . . . . . .20-23

contrast . . . . . . . . . . . . . . . . . . . .25 programs . . . . . . . . . . . . . . . . . . .65 timer recording

controls

remote . . . . . . . . . . . . . . . .14-15 random playback . . . . . . . . . . . . .65

tv/vcr/dvd . . . . . . . . . . . . . . . .16 ratings

cancelling . . . . . . . . . . . . . . . . .31

checking . . . . . . . . . . . . . . . . .31

setting . . . . . . . . . . . . . . . .28-30

counter . . . . . . . . . . . . . . . . .25, 36

mpaa . . . . . . . . . . . . . . . . . . . .46 tint . . . . . . . . . . . . . . . . . . . . . . . .25

tv . . . . . . . . . . . . . . . . . . . .42-45 title button . . . . . . . . . . . . . . .14, 51

real-time tape counter . . . . . . . . .36 titles . . . . . . . . . . . . . . . . . . . . . . .51

daylight-savings time . . . . . . . . . .24 rear panel . . . . . . . . . . . . . . . . . .17 tracking . . . . . . . . . . . . . . . . . . . .40

disc menu button . . . . . . . . . .15, 51 record button . . . . . . . . . . . .14, 26 tracks . . . . . . . . . . . . . . . . . . . . . .54

disc tray . . . . . . . . . . . . . . . . .13, 16 recording

display button . . . . . . . . .14, 25, 73

display settings . . . . . . . . . . . .70-71

duplication . . . . . . . . . . . . . . . . . .33

basic . . . . . . . . . . . . . . . . . . . .26 vcr/tv light . . . . . . . . . . . . . . . . . .16

one-touch . . . . . . . . . . . . . . . .27 v-chip setup . . . . . . . . . . . . . .42-47

timer . . . . . . . . . . . . . . . . .28-31 video in/out jacks . . . . .9, 16-17, 33

dvd light . . . . . . . . . . . . . . . . . . . .16 rec/otr button . . . . . . . . . . . .16, 27 virtual surround . . . . . . . . . . . . . .74

dvd video . . . . . . . . . . . . . . . . . . . .6 rec/otr light . . . . . . . . . . . . . . . . .16 volume L/M buttons . . . . . . .15-16

remote control

ejecting a tape . . . . . . . . . . . . . . .77

enter button . . . . . . . . . . . . . . . .15

buttons . . . . . . . . . . . . . . .14-15 warranty . . . . . . . . . . . . . . . . . . .79

using . . . . . . . . . . . . . . . . . . . . .7

remote sensor . . . . . . . . . . . . . . .16 zero return . . . . . . . . . . . . . . . . .36

fast forward search . . . . . . . .39, 52 repeat button . . . . . . . . . . . . .14, 56 zoom button . . . . . . . . . . . . .15, 59

front panel . . . . . . . . . . . . . . . . . .16 repeat a-b button . . . . . . . . .15, 56

repeat play . . . . . . . . . . . . . . .34, 56

glossary . . . . . . . . . . . . . . . . . . . .75 rerecording . . . . . . . . . . . . . . . . .33

resuming play . . . . . . . . . . . . . . . .55

headphone jack . . . . . . . . . . . . . .16 return button . . . . . . . . . . . . . . .14

IB8433E001

Printed In Malaysia

This owner’s manual is made of recycled paper.

0EMN02212 / TD857UH / TD957UH * * * * *

Download from Www.Somanuals.com. All Manuals Search And Download.

La Crosse Technology Weather Radio TX4U User Manual
Learning Resources Baby Toy ler5404 User Manual
LG Electronics Cell Phone VX10 User Manual
LG Electronics Microwave Oven LMV1314B User Manual
LG Electronics Webcam DCS 932L User Manual
Lightolier Indoor Furnishings 1050RNDL_3D User Manual
Lincoln Electric Welding System AC 1200 User Manual
Maxi Cosi Car Seat Priori Side Protection System User Manual
MB QUART Car Stereo System ONX11000D User Manual
McCulloch Lawn Mower M4053CM User Manual