Owner`s Manual
26MF605W/32MF605W Series
LCD TV
NEED HELP?CALL US!
MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH
ANY QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE
YOU THROUGH CONNECTIONS, FIRST-TIME SETUP, AND ANY OF
THE FEATURES. WE WANT YOU TO START ENJOYING YOUR NEW
PRODUCT RIGHT AWAY.
CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-2000
OR VISIT US ON THE WEB AT WWW.USASUPPORT.MAGNAVOX.COM
Important!
Return your Warranty Registration Card within 10 days.
3138 155 23445
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
1. Read these instructions.
A. The power supply cord or the plug has been damaged;
2. Keep these instructions.
3. Heed all warnings.
B. Objects have fallen, or liquid has been spilled into the
appliance;
4. Follow all instructions.
C. The appliance has been exposed to rain
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
D. The appliance does not appear to operate normally or
exhibits a marked change in performance;
7. Do not block any of the ventilation openings.
Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and third grounding prong. The wide blade or third prong are
provided for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability
properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such items
could unsuspectingly fall from the top of the set and cause
product damage and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away
from power lines.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from
tip-over.
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding connectors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. See
Figure below.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.
22. Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to the
unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline,
etc.).
16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
• Remove batteries when the unit is not used for a long time.
Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-
40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected
to the grounding system of the building, as close to the point of cable entry as practical.
Example ofAntenna Grounding as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
Introduction
General Information
Trouble Shooting Tips................................................... 36
Welcome/Registration of Your TV.............................................2
IMPORTANT SAFETY INSTRUCTIONS................................3
Table of Content..............................................................................4
Care And Cleaning......................................................................... 37
Index.................................................................................................. 38
Regulatory......................................................................................... 39
Regulatory......................................................................................... 40
Factory Service Locations............................................................ 41
Limited Warranty........................................................................... 42
Getting Started
Before Installation.............................................................5
Installing LCD TV on The Wall....................................................6
Basic TV and Remote Control Operations............................. 7
Remote Control...............................................................................8
Antenna Connection.......................................................................9
Connecting the Power cord......................................................... 9
Basic Cable TV Connection......................................................... 9
Cable Box Connections.................................................................10
VCR, DVD Player, or other Devices
Here are a few of the special features of your new LCD TV.
Audio/Video In Jacks: Use to quickly connect other
equipment to your LCD TV.
Automatic Channel Programming (Auto Program):
Quick and easy setup of available channels.
Closed Captioning: Allows the viewer to read TV program
dialog or voice conversations as on-screen text.
On-screen Menus: Helpful messages (in English, Spanish or
French) for setting TV controls.
with RCA Connectors....................................................................11
DVD Player or other Video Devices
with Component Video Connectors.........................................12
Digital TV Receiver, or a Digital Satellite Receiver
Remote Control: Works your LCD TV features.
Sleep Timer: Turns off the LCD TV within an amount of time
you specify (15-240 minutes from the current time).
AutoLock: Lets you block viewing of certain TV channels if you
do not want your children viewing inappropriate material.
Standard broadcast (VHF/UHF) or Cable TV channel
capability
Stereo capability: Includes a built-in amplifier and twin-speaker
system, allowing reception of TV programs broadcast in stereo.
Treble, Bass, and Balance: Enhance the LCD TV’s sound.
with HD (High Definition) Output.............................................13
Digital Satellite Receiver with DVI connector..........................14
PC (Monitor) Connection..............................................................15
AV Output..........................................................................................16
Install Menu
Language Settings..............................................................17
Tuner Mode Control.......................................................................18
Auto Program (Setting Up Channels)........................................19
Channel Edit Control......................................................................20
Factory Reset....................................................................................21
NOTE:This manual covers different versions and
models. Not all features described in this manual
will match those of your LCDTV. This is normal
and does not require you contacting your dealer or
requesting service.
Smart Picture and Smart Sound
Smart Picture Control...................................................22
Smart Sound Control.................................................................... 22
Picture Menu
TV Picture Menu Controls...........................................23
Sound Menu
TV Sound Menu Controls............................................ 24
END-OF-LIFE DISPOSAL
Your new LCD TV and its packaging contain materials that can
be recycled and reused. Specialized companies can recycle your
product to increase the amount of reusable materials and
minimize the amounts that need to be properly disposed.
Your product also uses batteries that should not be thrown away
when depleted, but should be handed in and disposed of as small
chemical waste.
When you replace your existing equipment, please find out about
the local regulations regarding disposal of your old television,
batteries, and packing materials.
Features Menu
Auto Lock......................................................................... 25
Auto Lock Access Code................................................................26
Auto Lock Program.........................................................................27
Auto Lock - Movie Ratings............................................................28
Auto Lock - TV Ratings................................................................. 29
Using The Picture Format.............................................................30
Closed Captions............................................................................. 31
PC Mode
PC Picture Controls...................................................... 32
PC Audio Controls........................................................................ 33
Using PC PIP (Picture In Picture) Feature............................... 34
Setting Up The PC Mode............................................................. 35
(Personal Computer Monitor).....................................................35
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE INSTALLATION
Positioning the LCD TV.
.Place the LCDTV on a solid,stable surface.Be sure the surface is
strong enough to handle the weight of the LCDTV.
.Do not place the LCDTV near a radiator or other source of
heat.
.Try to leave at least 6”of space around each side of the LCD
TV cabinet to allow for proper ventilation.
.Do not place the LCDTV where it can be exposed to rain or
excessive moisture.
IDENTIFYING ALL CONNECTORS (BACKSIDE)
6
1
3
5
4
2
7
8
9
10
Video output through AV OUT jacks is available only when
your LCD TV is displaying CVBS or RF signals.
AV IN 1
Connects to the output jacks of your VCR or other
video equipment.
1
2
VHF/UHF
Connect to your VHF/UHF antenna or cable
6
7
8
AV IN 2
Connects to the output jacks of your VCR or other
video equipment.
AC IN
Connects the supplied AC power cord.
Headphones jack
Connect to your headphones.
3
4
DVI IN (HDCP)
Connect to your DVD player or other video equipment with
DVI/HDCP output connectors.
AV IN 3
Y, Pb, Pr Input jacks
Connects to the component video connectors of
your DVD player or other video equipments with
SD (Standard Definition) video format.
PC IN
Connect to your PC with VGA type video output.
9
HD (High Definition) IN
Connect to the Digital Satellite Receiver or other video
equipments that supports YPbPr HD (High Definition) video
format.
10
AV OUT
Connects to the input jacks of your video and audio
equipment.
5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING LCDTV ONTHEWALL
efore you can install your LCD TV on the wall, you
Bmust first remove the base using the steps below:
Place the set facing down on a flat surface
with a protective sheet or cloth beneath
Remove 3 screws from the base.
Grasp the base and pull it out.
2
4
1
the TV.
2
1
3
Attach the supplied base cover. Your
LCD TV is now ready for wall mounting.
Remove the 2 metal pins.
3
When installing the LCDTV on the wall,please consult a professional technician for proper installing.
The manufacture accepts no liability for installations not performed by professional technician.
100x100mm
200x100mm
26"
32"
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASICTV AND REMOTE CONTROL OPERATIONS
TELEVISIONAND REMOTE CONTROL
2
3
Press POWER to turn on the LCD TV.
1
Press VOLUME + to increase the sound
level. Or, press VOLUME – to lower the
sound level.
2
Press CH+ or CH- to select channels.
3
4
1
Point the remote control toward on the
front of the LCD TV when operating the
LCD TV with the remote.
4
BATTERY INSTALLATION
M
E
N
U
OK
Remove the battery compartment lid on
the back of the remote.
3
2
P
I
P
SOURCE
5
6
C
C
Place two AAA batteries in the remote.
Be sure the (+) and (-) ends of the
batteries line up as marked inside the
battery compartment.
6
5
7
Reattach the battery compartment lid.
7
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Standby (Power) button
Press to turn the LCD TV on or off.
Number buttons
Press to select TV channels. When
selecting single-digit channels, press
the number of the desired channel.
The LCD TV will pause for a few
seconds then tune to the selected
channel.
Sleep button
Press to set the LCD TV to turn itself
off within a certain time.
Smart Picture button
Press repeatedly to select either
Personal, Movie, Sports, Weak signal,
Multimedia or Night picture setting.
Mute button
Press to eliminate or restore the
LCD TV sound. Mute will appear
on the screen when the sound is
muted.
Smart Sound button
Press repeatedly to select among the
4 settings; Personal, News, Music, or
Theater.
M E N U
OK
Menu button
Press to activate onscreen menu,
back to previous level inside the
onscreen menu, also press to exit
the onscreen menu.
Picture Format button
Press the FORMAT button repeatedly
to toggle among the four screen
format sizes; 4:3, SUPERWIDE,
ZOOM 16:9 or WIDESCREEN.
P I P
SOURCE
C C
Volume button
Press to increase or decrease the
sound level, also press to navigate
left/right in onscreen menu.
Previous Channel but-
ton
Press to go to previously selected
channel.
Source button
Press to select the video input
source: PC, DV1, AV1, AV2, AV3,
S-V1, S-V2, Component, HD
PIP button
Press repeatedly to change the size of
PIP window in PC mode.
OK button
Press to confirm the option you
selected in the onscreen menu.
Channel button
Press to adjust the channel up or
down. Also press to select or navigate
up/down in onscreen menu.
C.C button
Press the C.C button to select CC
on or CC off.
SAP button
Press to select a sound mode if
available with the TV programming:
Mono, Stereo, or SAP.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA CONNECTION
Twin-lead wire
Outdoor or Indoor Antenna
(Combination VHF/UHF)
combination antenna receives normal
Abroadcast channels (VHF 2–13 and UHF
14–69). Your connection is easy because there is
only one 75 Ω antenna jack on the back of your TV,
and that’s where the antenna goes.
to 300-75Ω adpter
or
2
1
Antenna
with 75Ω
cable
If your antenna has a round cable
(75 Ω) on the end, then you’re ready to
1
connect it to the LCD TV. If your
antenna has flat, twin-lead wire (300Ω),
you first need to attach the antenna wires
to the screws on a 300-75Ω adapter(not
supplied).
HELPFUL HINT
Connect the antenna (or adapter) to the
Select weak signal mode via the smart
picture settings in case your antenna
connection is showing a lot of noise or
strange patterns.
TV jack (marked 75 Ω) on the rear of the
LCD TV. If the end of the antenna wire is
threaded, screw it down finger tight.
2
BASIC CABLETV CONNECTION
our Cable TV signal into your home may
be a single, 75 Ω cable. If so, this
connection is very simple. Follow the step
below to connect your Cable TV signal to
your new LCD TV.
Y
1
Connect the cable TV signal to the TV
jack (marked 75 Ω) on the rear of the
LCD TV. Screw it down finger tight.
The Cable TV singal
from Cable Company
75Ω coaxial cable
1
Rear Jack panel of Television
CONNECTING THE POWER CORD
Complete other connections prior to
connecting the power cord.
Connect the power cord to the AC IN
connector of the LCD TV.
1
2
Connect the other plug of the power
cord to a wall outlet.
Wall outlet
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE BOX CONNECTIONS
f you have a Cable Box, follow either set of
Ithese steps to complete your connections.
Disconnect all power sources before
making any connections.
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound to
the LCD TV.
3
Connect the Cable TV signal to the IN jack
2
75Ω coaxial cable
(or RF IN or CABLE IN) on the Cable Box.
1
2
Connect an RF coaxial cable (not supplied)
to the OUT jack (or TO TV or RF OUT) of
the Cable Box.
OUTPUT
CH
4
3
4
CABLE
IN
TO
TV
Connect the other end of the coaxial cable
Cable Box
to the TV jack (marked 75 Ω) on the rear
of the LCD TV.
3
1
The Cable TV singal from Cable Company
Set the Channel (or Output channel) switch
of the Cable Box to 3 or 4. Set the TV to
4
the same channel. When watching TV
programming, change channels at the Cable
Box, not the LCD TV.
Cable Box with AV (Audio/Video) Out
Jacks
This connection will supply Stereo sound to the
LCD TV.
Connect the Cable TV signal to the
IN jack (or RF IN or CABLE IN) on the
Cable Box.
1
Using an RCA-type Video and Audio cable
(marked with yellow, red, and white),
2
connect the Cable Box’s Video and Audio
Out jacks to the TV’s Video and Audio In
jacks.
Note:
1. If your Cable Box is equipped with a
S-Video Out Jack, use the S-Video
connection for a better picture detail
and clarity. Use the S-Video cable to
connect the Cable Box’s S-Video Out
jacks to the TV’s S-Video In jacks.
2. You can also use the Video and Audio
jacks in AV IN 2 and AV IN 3 located
on the rear of the TV to connect your
Cable Box.
3. Use the SOURCE button on the remote
control to select AV 1 (or AV2, AV3,
S-Video1, or S-Video2 if you use the
different jacks for this hookup) to watch
Cable TV (your Cable Box must be
turned on).
2
OUTPUT
CH
3
4
L
R
VIDEO
OUT
AUDIO
OUT
CABLE
IN
TO
TV
S VIDEO
Cable Box
1Cable TV singal
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR,DVD PLAYER,OR OTHER DEVICES
WITH RCA CONNECTORS
he AV IN jacks on the rear of the LCD
TV enable quick connections of other
T
equipment. Connect a DVD player,VCRVideo
Game, Camcorder, etc., to these jacks.To view the
material playing on the other equipment, set the
LCDTV to its AV mode.
Disconnect all power sources before
making any connections.
Using an RCA-type Video and Audio cable
(usually marked yellow, red, and white),
connect the VCR’s Video and Audio Out
jacks to the TV’s Video and Audio In jacks.
1
1
Use SOURCE button on the remote
2
control to select AV 1 (or AV2, AV3,
S-Video1, or S-Video2 if you use the
different jacks for this hookup) to
watch VCR.
Note:
AV Player with A/V connectors
1. If your VCR equipped with a
S-Video Out jack, uses S-Video
connection for better picture detail
and clarity. Use the S-Video cable to
connect the VCR’s S-Video Out
jacks to the TV’s S-Video In jacks.
2. You can also use the Video and Audio
jacks in AV IN 2 and AV IN 3 located
on the rear of the TV to connect your
VCR or other Video Devices.
M
E
N
U
OK
3. If your DVD Player is equipped with
Component (Y, Pb, Pr) Output Jacks,
please refer to “Connecting a DVD
Player or other Video Equipments with
Component Video Connectors” section
for use of Component Video
P I P
SOURCE
2
C
C
Connection for highest color and
picture resolution in video playback.
HELPFUL HINT
• The Audio jack of AV IN is shared
between Video (CVBS) and S-Video
signals. If Audio and Video is connected
to Video (CVBS) input, you can still
hear sound if you select S-Video via
Source select, even there appears no
image on screen.
• Select weak signal mode via the smart
picture settings in case your VCR is
showing a lot of noise or strange patterns
during play mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD PLAYER OR OTHERVIDEO DEVICES
WITH COMPONENTVIDEO CONNECTORS
omponentVideo Input (Y, Pb, Pr) provide the
Chighest possible color and picture resolution in
the playback of digital signal source material, such
as with DVD player.
Disconnect all power sources before
making any connections.
Using a Component Video cable (not
supplied), connect the DVD player’s Y, Pb,
Pr jacks to the Y, Pb, Pr jacks on the TV.
Use the AV IN 3 connections.
1
1
Note: The Component (Y, Pb, Pr) Video
Input in AV IN 3 connections can display
SD (480i) image only. If your DVD player
can output Progressive scanned or HD
(High Definition) image, please refer to
“Digital TV Receiver, or a Digital Satellite
Receiver with HD (High Definition)
Output” in next section.
Accessory device equipped with
component video outputs
Using an AUDIO cable, connect the DVD
player’s AUDIO OUT jacks to the TV’s
AUDIO IN jacks in AV IN 3 connections.
2
2
Use Source button on the remote control
to select COMPONENT to watch DVD.
3
Note: 1. The Y, Pb, Pr jacks do not
provide audio, so audio cables
must be connected to provide
sound.
M
E
N
U
OK
P I P
SOURCE
3
C
C
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITALTV RECEIVER,OR A DIGITAL SATELLITE RECEIVER
WITH HD (HIGH DEFINITION) OUTPUT
DigitalTV Receiver or a Digital Satellite
AReceiver is able to produces HD (High
Definition) video signal with 480p, 720p, and 1080i
formats.A Component (Y Pb, Pr) Connection is
required for this kind of setup.
Note: This setup also support 480i.
Disconnect all power sources before
making any connections.
Using a Component Video cable, connect
the Digital TV Receiver’s Y, Pb, Pr jacks to
the Y, Pb, Pr jacks on the TV. Use the HD
IN connections.
1
Note: Component Video (Y, Pb, Pr)
connections in HD IN connections is
necessary to view 480p, 720p, and 1080i
formats. Note that the Component Video
Input in AV IN 3 Connections can only
support 480i format.
2
1
Using an Audio cable, connect the Digital
TV Receiver’s AUDIO OUT jacks to
the TV’s AUDIO IN jacks in HD IN
connections.
2
Digital Satellite Receiver with HD output
Use Source button on the remote control
3
to select HD to watch DVD.
Note: 1. The Y, Pb, Pr jacks do not
provide audio, so audio cables
must be connected to provide
sound.
M
E
N
U
OK
P I P
SOURCE
3
C
C
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL SATELLITE RECEIVER WITH DVI CONNECTOR
our LCD TV offers Digital Video Interface
Y(DVI) with High Definition Copy Protection
(HDCP) connections. This feature allows a
digital connection between set-top boxes and
the LCD TV, creating a more vibrant image.
DVI HDCP technology allows content providers
the ability to utilize the full bandwidth of high
definition signals.
2
Disconnect all power sources before
making any connections.
Connect the digital DVI output of your
HD device (e.g. DVD player, Set Top
Box..) to the DVI connector of the DVI
IN connection.
1
1
Connect the AUDIO cable (if audio is
present) to the Audio outputs of your HD
device and to the AUDIO R (right) and L
(left) inputs of the DVI IN connection.
2
Use Source button on the remote control
(1080i/720p/480p)
to select DVI to watch the programs.
3
Digital Satellite Receiver with DVI connector
Note:
1. Proper working is only guaranteed
with DVI compliant consumer
products.
2. Digital devices from different
manufactures have the possibility
of differing output standards which
may cause difficulties for the television
to properly display.
M
E
N
U
OK
3. It is not recommended to connect
your PC to LCD TV via DVI
connection, since the LCD TV may
not support the PC display mode you
are using.
P I P
SOURCE
3
C
C
DVI is a specific digital input allowing
encrypted transmission of uncompressed
HD content. DVI includes HDCP (High-
Bandwidth Digital Content Protection),
which is supported by Hollywood,
satellite providers, and most of the
consumer electronics industry. DVI
is gaining monumentum and quickly
becoming an industry standard for the
consumer to view high definition material
while keeping content protected.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
PC (MONITOR) CONNECTION
his LCD TV can be used as a PC monitor.
Your computer will have to equipped with a
VGA type video output and VGA cable.
T
Disconnect all power sources
before making any connections.
Using a VGA cable (not supplied), connect
PC’s VGA OUT connector to the VGA
connector on the TV. Use the PC IN
connections.
1
Using a MINI-JACK type AUDIO
cable (not supplied), connect the PC’s
2
AUDIO OUT connector to the AUDIO
connector on the TV. Use the PC IN
connections.
1 2
Use Source button on the remote control
to select PC to use your LCD TV as a PC
3
monitor.
Note: 1. Please refer to “Setting Up
the PC Mode” section for all
the supported PC display
modes. If possible, use the
1280 x 720@60Hz video mode
to obtain the best PC image
quality.
Computer
M
E
N
U
OK
P I P
SOURCE
3
C
C
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AV OUTPUT
he AV (Audio/Video) out jacks are great for
Trecording with a VCR or used to connect an
external audio system for better audio.
Disconnect all power sources
before making any connections.
For VCR Connection/Recorder:
1
2
Connect one end of the yellow Video
1
2
3
Cable to the VIDEO jack of AV OUT
connection. Connect the other end to the
VIDEO IN jack on the VCR.
VCR
Connect one end of the red and white
Audio Cable from the L and R AUDIO
jack of AV OUT connection to the
AUDIO IN jack on the VCR.
Turn the VCR on, insert a blank VHS
tape and it’s ready to record what’s being
viewed on the TV screen.
Note: The Program recording is only
possible when the input signal is SD
(480i).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE SETTINGS
or English, French or Spanish-speaking
FTV owners, an onscreen LANGUAGE option
is present. The LANGUAGE control enables you
to set the TV’s onscreen menu to be shown in
either English, French or Spanish.
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
INSTALL
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
ENGLISH
MANUAL FINE TUNE
FACTORY RESET
M E N U
Press the MENU
button on the
remote control to see the onscreen
menu.
1
�
�
Press the (CH-)
the INSTALL menu.
button to highlight
button to enter the
button to select
2
3
4
5
Press the (VOL+)
INSTALL menu.
M E N U
��
Press the (VOL+)
English, French or Spanish.
�
�
P I P
SOURCE
C C
M E N U
Press the MENU
clear the menu from the screen.
button repeatedly to
�
HELPFUL HINT
Remember, the LANGUAGE control makes
only the TV’s onscreen MENU items
appear in English, French or Spanish text. It
does not change the other onscreen text
features, such as Closed Captioning (CC),
with TV shows.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER MODE CONTROL
he Tuner Mode allows you to change the LCD
TV’s signal input to Cable or Air
T
(antenna). It’s important for the LCD TV to know
if you want to receive channels from a cable TV
signal or an antenna signal.
MAIN CONTROLS
PICTURE
AUDIO
LANGUAGE
TUNER MODE
INSTALL
FEATURES
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
Before making adjustment, press SOURCE
button on your remote control to switch your
LCD TV to the TV MODE.
INSTALL
CABLE
M E N U
Press the Menu
menu.
button to see the onscreen
button to highlight the
button to enter the
1
2
3
4
5
6
�
�
Press the (CH-)
INSTALL menu.
Press the (VOL+)
INSTALL menu.
M E N U
OK
Press the (CH-)
TUNER MODE menu.
button to highlight the
P I P
SOURCE
�
�
C C
Press the (VOL+)
select CABLE, AIR (antenna), or AUTO.
or (VOL-)
buttons to
�
�
M E N U
Press the MENU
the menu from the screen.
button repeatedly to clear
HELPFUL HINT
•WhenCABLEisselected, channels1-125areavailable.
•When ANTENNA is selected, channels 2-69 are
available.
•When AUTO is selected, your LCD TV will search
automatically for antenna and cable channels.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO PROGRAM (SETTING UP CHANNELS)
our LCD TV can automatically
Yset itself for local area (or cable TV)
channels. This makes it easy for you to select
only the TV stations in your area by pressing
the CH (+) or CH (-) button.
INSTALL
LANGUAGE
TUNER MODE
ENGLISH
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
M E N U
Press the MENU
button on the
INSTALL
remote control to show the
onscreen menu.
1
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
START?
Press the (CH-)
button to
highlight the INSTALL menu.
MANUAL FINE TUNE
FACTORY RESET
2
3
4
5
6
Press the (VOL+)
button
to enter the INSTALL menu.
AUTO STORE
�
�
�
Press the (CH-)
button to
PLEASE WAIT
PROG.FOUND
CHANNEL
highlight the AUTO PROGRAM control.
0
3
�
M E N U
Press the (VOL+) button to start the
AUTO PROGRAM scanning of channels.
OK
P I P
SOURCE
M E N U
Press the MENU
button repeatedly
to clear the menu from the screen, after
AUTO STORE has finished.
C C
�
�
HELPFUL HINT
After you’ve run Auto Program, check out
the results. Press the CH+ or the
CH- button and see which channels you
can select.
Remember, an antenna or cable TV signal
must first be connected to your LCD TV
(see pages 9-10 of this owner’s manual).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL EDIT CONTROL
hannel Edit control lets you edit the channel
Clisting. You can add or remove a channel in the
LCD TV’s memory.
MAIN CONTROLS
PICTURE
AUDIO
LANGUAGE
TUNER MODE
INSTALL
M E N U
Press the Menu
onscreen menu.
button to see the
FEATURES
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
CHANNEL
SKIPPED
INSTALL
1
2
3
4
5
6
MANUAL FINE TUNE
FACTORY RESET
Press the (CH-)
INSTALL menu.
button to highlight the
button to enter the
button to highlight the
CHANNEL EDIT
2
CHANNEL
SKIPPED
Press the (VOL+)
INSTALL menu.
�
�
CHANNEL EDIT
Press the (CH-)
CHANNEL EDIT menu.
CHANNEL
SKIPPED
ACTIVE
M E N U
Press the (VOL+)
CHANNEL EDIT menu.
button to enter the
OK
P I P
SOURCE
�
�
In CHANNEL column, press (VOL+)
or
(VOL-)
to select the channel you wish
C C
�
�
�
�
to add or remove.
In SKIPPED column, press (VOL+)
or
�
�
(VOL-)
to select ACTIVE (to add)
7
8
or SKIPPED (to delete) the channel you
selected.
M E N U
Press the MENU
clear the menu from the screen.
button repeatedly to
HELPFUL HINT
Repeat steps 6 –7 to add or delete additional
channels to or from the LCD TV’s memory.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
FACTORY RESET
our TV can be reset to the original
Yfactory settings by performing the
following steps.
MAIN CONTROL
PICTURE
AUDIO
LANGUAGE
TUNER MODE
FEATURES
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
INSTALL
INSTALL
LANGUAGE
TUNER MODE
FACTORY RESET
M E N U
Press the MENU
button on the
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
remote control to see the onscreen
menu.
1
FACTORY RESET
YES
Press the (CH-)
INSTALL menu.
button to highlight the
2
3
4
5
6
�
Press the (VOL+)
INSTALL menu.
button to enter the
�
M E N U
Press the (CH-)
FACTORY RESET control.
button to highlight the
OK
�
�
P I P
SOURCE
Press the (VOL+)
TV to the original factory settings.
button to reset the
C C
M E N U
Press the MENU
clear the menu from the screen.
button repeatedly to
�
�
HELPFUL HINT
If you reset the TV to the factory settings,
all your present setting on picture, audio
and other feature settings will be erased
and replaced by the manufacture’s default
settings. However, your AutoLock access
code will not be erased. Please refer to
page 25 for details.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SMART PICTURE CONTROL
hether you’re watching a movie or a video
Wgame, your LCD TV has video control preset
that will match with your current program source or
content. Smart Picture quickly resets your TV’s video
controls for a number of different types of programs
and viewing conditions that you may have in your
home. The Movies, Sports, Weak Signal, Multimedia,
and Night Smart Picture controls have been preset at
the factory to easily adjust the TV’s brightness, color,
picture, sharpness, tint, and color temperature levels.
In the Personal smart picture mode you can create
your own preferred video settings.
Personal
Movies
Sports
1
2
M
E
N
U
OK
P
I
P
SOURCE
Press the PICTURE button
on the remote
Weak Signal
Multimedia
C
C
control. The current Smart Picture setting will
appear on the screen.
1
2
Press the PICTURE button
repeatedly to
select either Personal, Movies, Sports, Weak
Signal, Multimedia, and Night Smart Picture
settings.
Night
Note:The settings of the Personal smart picture
mode can be adjusted in picture options
within the onscreen menu. The Personal
mode is the only mode which can be
adjusted by the user via the onscreen
picture control menu.
HELPFUL HINT
Select weak signal mode via the smart
picture settings in case your VCR or TV
antenna signal is showing a lot of noise or
strange patterns.
SMART SOUND CONTROL
mart Sound allows you to select from three
user presets and a personal mode that you set
S
according to you own preferences through the
onscreen Sound menu. The three user
presets(News, Music, and Theatre) enable you to
tailor the TV sound so as to enhance the
particular program you are watching. Following these
steps to select any of the options.
Personal
News
Music
Press the Sound button on the remote control.
The current Smart Sound setting will appears
on the screen.
1
M
E
N
U
Press the Sound button repeatedly to toggle
among the four setting: Personal, News, Music,
or Theatre.
OK
�
�
2
P
I
P
SOURCE
Theatre
C
C
Note:The settings of the Personal smart sound mode
can be adjusted in sound control within the
onscreen menu. The Personal mode is the only
mode which can be adjusted by the user via the
onscreen sound control menu.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TV PICTURE MENU CONTROLS
o adjust your LCD TV picture, select
a channel and follow these steps.
T
MAIN CONTROL
PICTURE
AUDIO
FEATURES
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
PICTURE
M E N U
Press the MENU
onscreen menu.
button to see the
SMART PICTURE
BRIGHTNESS
COLOR
PERSONAL
1
2
INSTALL
CONTRAST
SHARPNESS
TINT
When PICTURE menu is highlighted,press
the (VOL+) button to enter the
PICTURE menu.
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
Press the (CH+)
or (CH-)
button to
60
60
60
60
60
choose the item you want to adjust: Smart
Picture, Brightness, Color, Contrast,
sharpness or Tint.
3
CONTRAST
SHARPNESS
TINT
�
�
Smart Picture: Please refer to page 22,
for details on Smart Picture Settings.
Brightness: Adjust to brighten the dark
parts of the picture. This appears to add
white to the color.
Color: Adjust to add or reduce color.
Contrast: Adjust to “sharpen” the
Picture quality. The black portions of the
picture become richer in darkness and
the white become brighter.
�
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
�
M E N U
CONTRAST
SHARPNESS
TINT
OK
PICTURE
�
�
�
P I P
SOURCE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
C C
Sharpness: Adjust to improve detail.
Tint: Adjust to obtain natural skin tones.
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
Press the (VOL+)
adjust the item.
or (VOL-) button to
�
�
4
5
CONTRAST
SHARPNESS
TINT
Press the (CH+)
select and adjust other picture controls.
or (CH-)
button to
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
M E N U
Press the MENU
remove the menu.
button repeatedly to
6
CONTRAST
SHARPNESS
TINT
HELPFUL HINT
Brightness, color, contrast, and sharpness
can only be accessed when Smart Picture
is set to PERSONAL.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SOUND MENU CONTROLS
o adjust your LCD TV Sound,
Tselect a channel and follow these steps.
MAIN CONTROL
PICTURE
AUDIO
SMART SOUND
SETTINGS
STEREO
AUDIO
FEATURES
SMART SOUND
SETTINGS
PERSONAL
M E N U
VIRTUAL SURROUND
AVL
Press the MENU
button to see the menu.
INSTALL
1
2
STEREO
VIRTUAL SURROUND
AVL
Press the (CH-)
AUDIO menu.
button to highlight the
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
TREBLE
BASS
Press the (VOL+) button to enter the AUDIO
menu.
BALANCE
3
4
1
7
4
6
Press the (CH+)
choose the item you want to adjust: Smart Sound,
Treble, Bass or Balance.
Smart Sound: Please refer to page 22 for details
on Smart Sound Settings.
Settings: Allows you to adjust Treble, Bass, and
Balance of the sound.
or (CH-)
button to
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
M E N U
STEREO
OK
Stereo: Adjust to select between Stereo, Mono,
or SAP.
Virtual Surround: Adds greater depth and
dimension to TV sound. Select from Virtual
Surround or OFF.
AVL (Auto Volume Leveler): When On, AVL will
level out the sound being heard when
sudden changes in volume occur during
commercial breaks or channel changes.
P I P
SOURCE
5
3
5
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
C C
VIRTUAL SURROUND
2
4
6
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
Press the (VOL+)
adjust the item.
or (VOL-)
button to
YES
5
Press the (CH+)
or (CH-)
button to
select and adjust other sound controls.
6
7
M E N U
Press MENU
to remove the menu.
HELPFUL HINT
• Treble and Bass can only be accessed when
Smart Sound is set to Personal.
• If Stereo is not presented on a selected show
and the TV is placed in Stereo mode, the
sound coming from TV will remain in Mono
mode.
• In case the sound from a VCR, DVD or other
external AV device is poor, activate AVL [yes]
and put the smart sound settings in personal
mode and optimize the sound by changing the
treble and bass settings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO LOCK
MOVIE RATING
TV RATING
he AUTO Lock feature is an integrated
Tcircuit that receives and processes data
sent by broadcasters, or other program
providers, that contain program content
advisories.
G
Y
ON
ON
PG
Y7
PG13
R
NC17
G
PG
14
When programmed by the viewer, a TV
with AUTO Lock can respond to the content
advisories and block program content that
may be found objectionable (such as offensive
language, violence, sexual situations, etc.).
This is a great feature to censor the type of
viewing children may watch.
X
MA
TV RATINGS
MOVIE RATINGS
G: General Audience - All ages
admitted.
TV-Y All children - Appropriate for all
children. Designed for a very young
audience, including children ages 2-6.
This type of programming is not
expected to frighten younger children.
TV-Y7 Directed to Older Children -
Designed for children age 7 and above.
It may be more appropriate for children
who can distinguish between
make-believe and rearity. This
programming may include mild fantasy
and comic
violence (FV or fantasy violence).
TV-G General Audience - Most
parents would find this programming
suitable for all ages. This type of
programming contains little or no
violence, no strong language, and little or
no sexual dialog or situations.
Most parents would find this program
suitable for all ages. This type of
programming contains little or no
violence, no strong language, and little or
no sexual dialog or situations.
PG: Parental Guidance Suggested -
This programming contains material that
parents may find unsuitable for younger
children. It may contain one or more of
the following: moderate violence, some
sexual situations, infrequent coarse
language, or some suggestive dialog.
PG-13: Parents Strongly
AUTO Lock offers various BLOCKING
controls from which to choose:
Access Code - An Access Code must be set to
prevent children from unblocking questionable or
censored programming set by their parents.
Block Enable - After an access code has
been programmed, you can block programming
depending on the received rating and user setting.
Movie Ratings - Certain blocking options
exist which will block programming based on ratings
patterned by the Motion Pictures Association of
America.
Cautioned -
This programming contains material that
parents may find unsuitable for children
under the age of 13. It contains one or
more of the following: violence, sexual
situations, coarse language, or suggestive
dialog.
R: Restricted -This programming is
specifically designed for adults. Anyone
under the age of 17 should only view this
programming with an accompanying
parent or adult guardian. It contains
one or more of the following: intense
violence, intense sexual situations, strong
coarse language, or intensely suggestive
dialog.
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
TV-PG Parental Guidance
Suggested -
Contains material that parents may
find unsuitable for younger children.
This type of programming contains one
or more of the following: Moderate
violence (V), some sexual situations (S),
infrequent coarse language (L), or some
suggestive dialog (D).
TV-14 Parents Strongly Cautioned -
Contains some material that many
parents would find unsuitable for
children under age 14. This type of
programming contains one or more of
the following: intense violence (V),
intense sexual situations (S), strong
coarse language (L), or intensely
suggestive dialog (D).
NC-17: No children under the age
of 17 will be admitted. - This type of
programming should be viewed by adults
only. It contains graphic violence, explicit
sex, or crude, indecent
language.
X: Adults Only - Thistypeofprogramming
contains one or more of the following:
very graphic violence, very graphic and
explicit or indecent sexual acts, and very
coarse and intensely suggestive language
TV-MA Mature Audience Only -
Specifically designed to be viewed by
adults and may be unsuitable for children
under 17. This type of programming
contains one or more of the following:
graphic violence (V), explicit sexual
situations (S), or crude, indecent
language (L)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO LOCK ACCESS CODE
ver the next few pages you’ll learn how
Oto block programs and understand the
rating terms for certain broadcasts. First, set
an access code.
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
SOURCE
FEATURES
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
LOCK PROGRAM
CHANG CODE
CLEAR ALL
BLOCK OPTION
MOVIE RATING
TV RATING
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
CLOSED CAPTION
M E N U
Press the MENU
onscreen menu.
button to see the
button to highlight the
button to enter the
button to select AUTO
button
CLOSED CAPTION
1
2
3
4
5
6
CHANGE CODE
Press the (CH-)
ENTER NEW CODE
CONFIRM CODE
----
----
FEATURES menu.
�
Press the (VOL+)
FEATURES menu.
�
M E N U
Press the (CH-)
LOCK.
OK
�
�
P I P
SOURCE
Press the (VOL+)
CHANGE CODE will appear on the screen.
C C
Enter a four-digit code using the Number
buttons. The screen will prompt you to
confirm the code you just entered. Enter your
same new code again.
�
�
M E N U
Press MENU
repeatedly to remove
the menu from the screen.
7
HELPFUL HINT
Remember that 0711 is the default Auto Lock
code. If your access code has been changed by
someone other than you (a child, for example) or
you have forgotten the code, you can always get
access by inputting the default code (0711).
NOTE TO PARENTS: It is not possible for your
child to unblock a channel without knowing your
access code or changing it to a new one. If your code
has been changed without your knowledge, then you
will become aware that blocked channel may have
been viewed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO LOCK PROGRAM
fter your personal access code has been
Aset (see the previous page), you are ready to
select the channels or inputs you want to block
out or censor.
MAIN CONTROLS
PICTURE
AUDIO
SOURCE
FEATURES
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
M E N U
Press the MENU
onscreen menu.
button to see the
button to highlight the
button to enter the
button to select
FEATURES
LOCK PROGRAM
CHANG CODE
CLEAR ALL
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
1
2
3
4
5
6
CLOSED CAPTION
BLOCK OPTION
MOVIE RATING
TV RATING
CLOSED CAPTION
Press the (CH-)
FEATURES menu.
6
AUTOLOCK
Press the (VOL+)
FEATURES menu.
ACCESS CODE
----
1
7
Press the (CH-)
AUTO LOCK.
AUTOLOCK
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
18
M E N U
BLOCK OPTION
MOVIE RATING
TV RATING
Press the (VOL+)
AUTO LOCK menu.
button to enter
OK
3
5
7
P I P
SOURCE
Use the Number buttons to enter
your access code.
C C
Press the (VOL+)
current selected channel or (VOL-)
button to unblock a channel.
button to block
2
4
7
M E N U
Press MENU
repeatedly to remove
the menu from the screen.
8
Note:You can block additional channels by
using Number buttons to jump to
another channel.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO LOCK - MOVIE RATINGS
he AUTO Lock feature can block programming
based on the Movie Industry ratings.
T
MAIN CONTROLS
Once you’ve entered your access code and the AUTO
Lock features are displayed on the
screen:
PICTURE
AUDIO
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
FEATURES
FEATURES
LOCK PROGRAM
CHANG CODE
CLEAR ALL
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
CLOSED CAPTION
BLOCK OPTION
MOVIE RATING
TV RATING
M E N U
CLOSED CAPTION
Press the MENU
onscreen menu.
button to see the
1
2
3
4
5
6
7
8
6
AUTOLOCK
Press the (CH-)
FEATURES menu.
button to highlight the
button to enter the
button to select AUTO
button, INPUT USER
ACCESS CODE
----
1
9
Press the (VOL+)
FEATURES menu.
AUTOLOCK
G
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
PG
PG13
R
NC17
M E N U
BLOCK OPTION
MOVIE RATING
TV RATING
Press the (CH-)
LOCK.
X
OK
MOVIE RATING
3
5
P I P
SOURCE
G
PG
PG13
R
NO
Press the (VOL+)
CODE will appear.
C C
NC17
X
Use the Number buttons to enter your access
code.
2
4
7
Press the (CH-)
RATING.
button to select MOVIE
Press the (VOL+)
button to highlight any of
the Movie Rating options. When highlighted, all
these options can be (ON) blocked or (OFF)
unblocked.
M E N U
Press MENU
repeatedly to remove the
menu from the screen.
9
HELPFUL HINT
When a rating is chosen to be blocked, any high-
er level rating will also be blocked from viewing
(i.e.: If “R” is selected to be blocked, NC-17 and
X will automatically be blocked.) When a rating
is set to unblock, only the selected rating will be
unblocked (Ratings lower will not automatically
be unblocked).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO LOCK -TV RATINGS
he AUTO Lock feature can block
programming based on the TV
T
Industry ratings.Once you’ve entered your
access code and the AUTO Lock features are
displayed on the screen:
MAIN CONTROLS
PICTURE
AUDIO
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
FEATURES
FEATURES
LOCK PROGRAM
CHANG CODE
CLEAR ALL
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
CLOSED CAPTION
BLOCK OPTION
MOVIE RATING
TV RATING
M E N U
CLOSED CAPTION
Press the MENU
onscreen menu.
button to see the
buttons to
6
1
2
3
4
5
AUTOLOCK
Press the (CH-)
ACCESS CODE
----
1
9
highlight the FEATURES menu.
Press the (VOL+)
buttons
to enter the FEATURES menu.
AUTOLOCK
M E N U
Y
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
Y7
G
Press the (CH-)
button to
highlight AUTO Lock.
OK
BLOCK OPTION
MOVIE RATING
TV RATING
PG
14
8
3
5
8
MA
P I P
SOURCE
TV RATING
Press the (VOL+)
INPUT USER CODE will appear on the
screen.
button,
NO
Y
Y7
C C
G
PG
14
2
4
7
MA
Use the Number buttons to enter your
access code.
6
7
8
Press the (CH-)
RATING.
buttons to select TV
Press the (VOL+)
or (VOL-)
button to highlight any of the TV
Rating options. When highlighted, all
these options can be (ON) blocked or
(OFF) unblocked.
M E N U
Press MENU
repeatedly to
remove the menu from the screen.
9
HELPFUL HINT
When a rating is chosen to be blocked, any high-
er level rating will also be blocked from viewing
(i.e.: If “R” is selected to be blocked, NC-17 and
X will automatically be blocked.) When a rating
is set to unblock, only the selected rating will be
unblocked (Ratings lower will not automatically
be unblocked).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
USINGTHE PICTURE FORMAT
ou can change the picture format size to match
Ythe type of program you are watching. Select
the normal 4:3, ZOOM 16:9, SUPERWIDE, or
WIDESCREEN aspect ratio.
MAIN CONTROLS
FEATURES
PICTURE
AUDIO
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
FEATURES
4 : 3
INSTALL
CLOSED CAPTION
CLOSED CAPTION
Picture Format
4:3
Display pictures of normal size (i.e., a 4:3
aspect ratio).
ZOOM 16:9
Vertically extend the height to eliminate the
upper and lower part of the image. Ideal for
displaying picture recorded in 2.35 :1 aspect
ratio (Cinema Vision size).
SUPERWIDE
Displays nature-looking pictures of standard
size (i.e., a 4:3 aspect ratio) on the wide screen.
WIDESCREEN
Display pictures in wide format. Ideal for
display pictures recorded in native 16:9 aspect
ratio (i.e., a HDTV broadcasting program).
Note:
1. You can directly change the picture
format by pressing the FORMAT
button on your remote control.
2. The Picture Format Function is not
accessible in PC MODE.
3. In HD and DVI MODE, the Picture
Format Function is only accessible
when input video signal is SD (e.g.
480i/480p). If input video signal is HD
(e.g. 720p/1080i), the Picture Format
Function will not be accessible.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOSED CAPTIONS
losed Captioning (CC) allows you to
Cread the voice content of television
MAIN CONTROLS
programs on the TV screen. Designed to help
the hearing impaired, this feature uses onscreen
“text boxes” to show dialogue and conversations
while the TV program is in progress.
PICTURE
AUDIO
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
FEATURES
FEATURES
INSTALL
CAPTION MODE
CC DISPLAY
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
CLOSED CAPTION
M E N U
Press the MENU
onscreen menu.
button to see the
button to highlight
CLOSED CAPTION
1
2
3
4
5
Press the (CH -)
CLOSED CAPTION
the FEATURES menu.
1
6
CAPTION MODE
CC DISPLAY
CC1
Press the (VOL+)
FEATURES menu.
button to enter the
Press the (CH -)
button to select
CLOSE CAPTION.
M E N U
Press the (VOL+)
button to select
OK
the closed caption you want: CC MUTE,
CC1, CC2, CC3, CC4, Txt1, Txt2, Txt3
or Txt4.
3
5
P I P
SOURCE
C C
2
4
6
Note:Closed Caption can also be activated by
pressing CC button on your remote
control.
HELPFUL HINT
Not all TV programs and product
commercials are broadcast with Closed
Captioning (CC). Nor are all Closed
Captioning MODES (CAPTION 1–4 or TEXT
1–4) necessarily being used by
broadcast stations during the transmission of a
program offering Closed Captioning. Refer to
your area’s TV program listings for the stations
and times of shows being
broadcast with Closed Captioning.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
PC PICTURE CONTROLS
his TV can also be used as a PC Monitor. A PC
video signal must be present or the TV will go
MAIN CONTROLS
T
PICTURE
AUDIO
SMART PICTURE
BRIGHTNESS
into standby mode. The PC Picture controls allow you
to adjust the picture.
PICTURE
CONTRAST
FEATURES
INSTALL
AUTO ADJUST
MANUAL ADJUST
Note: Make sure you are in PC mode.
SMART PICTURE
BRIGHTNESS
NORMAL
CONTRAST
AUTO ADJUST
MANUAL ADJUST
M E N U
Press the MENU
button on the remote
control to see the onscreen menu.
1
2
3
PICTURE
When the PICTURE menu is highlighted, press
the (VOL+) buttons to enter the PICTURE
menu.
SMART PICTURE
BRIGHTNESS
60
�
�
CONTRAST
AUTO ADJUST
MANUAL ADJUST
Press the (CH +)
or (CH -)
button to
highlight the item that you would like to adjust.
Smart Picture: Adjust the color
temperature of the picture. Select from
Normal, Cool, or Warm.
�
PICTURE
M E N U
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
60
OK
Brightness: Adjust to brighten the darkest
parts of the picture.
�
�
Contrast: Adjust to “sharpen” the Picture
quality. The black portions of the picture
become richer in darkness and the white
become brighter.
Auto Adjust: The LCD Monitor will
automatically adjust to the best image
position, phase, and clock setting.
Manual Adjust: The Manual Adjust control
allow you to manually fine tune the image as
it appears on the screen.
P I P
SOURCE
PICTURE
C C
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
YES
�
PICTURE
Phase-eliminates the horizontal
interfering lines.
SMART PICTURE
BRIGHTNESS
PHASE
CLOCK
CONTRAST
HORIZONTAL
VERTICAL
Clock-eliminates the vertical interfering
lines.
AUTO ADJUST
MANUAL ADJUST
Horizontal-adjust the horizontal
placement of the picture.
Vertical-adjust the vertical placement of
the picture.
Press the (VOL+)
adjust the item.
or (VOL-)
button to
4
5
M E N U
Press MENU
repeatedly to remove
the menu from the screen.
Note: To adjust other items repeat steps 4 and 5.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
PCAUDIO CONTROLS
his TV can also be used as a PC Monitor. A
TPC video signal must be present or the TV
will go into standby mode. The AUDIO controls
allow you to adjust the sound.
MAIN CONTROL
PICTURE
AUDIO
SMART SOUND
SETTINGS
STEREO
AUDIO
FEATURES
VIRTUAL SURROUND
AVL
INSTALL
SMART SOUND
SETTINGS
PERSONAL
Note: Make sure you are in PC mode.
STEREO
VIRTUAL SURROUND
AVL
M E N U
Press the MENU
button on the
remote control to show the
onscreen menu.
1
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
TREBLE
BASS
Press the (CH-)
AUDIO menu.
button to highlight the
BALANCE
1
6
2
3
Press the (VOL+)
button to shift the
menu to the right to enter the AUDIO
menu.
AUDIO
4
M E N U
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
Press the (CH +)
or (CH-)
STEREO
button to highlight the item that you
would like to adjust:
4
OK
Smart Sound: Allows you to select
from 3 factory-set controls and a
personal control. The 3 factory-set
controls (News, Music, and Theatre)
enhance the particular program you are
watching.
Settings: Allows you to adjust Treble,
Bass, and Balance of the Sound.
Stereo: To select from Stereo, Mono,
and SAP.
3
5
3
5
P I P
SOURCE
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
C C
VIRTUAL SURROUND
2
4
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
Virtual Sound: Adds greater depth and
dimension to PC sound.
AVL (Auto Volume Leveler)- When ON,
AVL will level out the sound being heard
when sudden changes in volume occur
during commercial breaks or channel
changes.
YES
Press the (VOL+)
or (VOL-)
5
6
buttons to adjust the item.
M E N U
Press MENU
repeatedly to remove
the menu from the screen.
HELPFUL HINT
To adjust other items repeat steps 4 and 5.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
USING PC PIP (PICTURE IN PICTURE) FEATURE
IP (Picture-in-Picture) feature allows you to call
Pup a subscreen when you are using your TV as a
MAIN CONTROL
PICTURE
AUDIO
monitor.
PIP
SOURCE
FEATURES
Note: Make sure you are in PC mode.
FEATURES
INSTALL
SIZE
PIP
SOURCE
VIDEO
AUDIO
DISPLAY
M E N U
Press the MENU
onscreen menu.
button to see the
button to highlight the
button to enter the
1
2
3
Press (CH -)
FEATURE menu.
Press (VOL+)
FEATURE menu.
�
�
M E N U
Press (VOL+)
button to enter the PIP menu.
4
5
��
Press the (CH +)
to highlight the item that you would like to
adjust.
SIZE: Turn off and set the size of PIP. You
can choose you preferred size of small,
medium, large, or PBP (Picture Beside
Picture).
or ( CH -)
buttons
�
P I P
SOURCE
�
C C
Video: Select video source of PIP from AV,
S-Video, TV, or Component.
Audio: Select audio source of PIP or PC.
Display: Select which corner of the
position of PIP.
�
�
HELPFUL HINT
PIP windows with Component video source can
only support up to 480i (SD) video signal.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UPTHE PC MODE
(PERSONAL COMPUTER MONITOR)
26MF Series (26” LCD TV)
No
Resolution
Mode
V. Frequency (Hz)
59.940
H. Frequency (kHz)
31.469
1
640 x 480
VGA VESA 60
2
3
SVGA VESA 56
SVGA VESA 60
56.250
60.317
35.156
37.897
800 x 600
4
1024 x 768
1280 x 720
XGA VESA 60
VESA CVT
60.004
59.855
48.363
44.772
* 5
6
1280 x 768
VESA CVV
60.000
47.700
* Recommended Resolution
32MF Series (32” LCD TV)
No
Resolution
Mode
V. Frequency (Hz)
59.940
H. Frequency (kHz)
31.469
1
640 x 480
VGA VESA 60
2
3
SVGA VESA 56
SVGA VESA 60
56.250
60.317
35.156
37.897
800 x 600
4
1024 x 768
1280 x 720
XGA VESA 60
VESA CVT
60.004
59.855
48.363
44.772
* 5
6
1280 x 768
VESA CVV
60.000
47.700
* Recommended Resolution
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTINGTIPS
No Power
• Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds,
then reinsert the plug into the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
• Make sure a fuse has not blown at the power outlet.
No Picture
• Check the antenna or Cable TV connections. Connect the antenna or Cable TV signal securely to the TV’s
75Ω jack on the rear of the TV.
• Set TUNER MODE correctly. Details are on page 18.
• Activate AUTO PROGRAM to find all available channels. Details are on page 19.
• In case you hear only sound and don’t see any picture in S-Video or Video (CVBS) mode. Please check if you
have connected Video signal to S-Video or Video (CVBS) input. Only one of the two video inputs can be
connected to sound. This means that the same sound can be heared in S-Video and Video (CVBS) mode.
No Sound
• Press the VOL+ and VOL- buttons to adjust the volume.
• Press the MUTE button on the remote control to cancel or restore the volume.
• If you have connected other equipment to the TV (such as a VCR or DVD Player), make sure the audio cables
are connected securely between the TV and the other equipment.
• Check the SOUND settings. Details are on page 22 or 24.
• In case you hear wrong sound in S-Video or Video (CVBS) mode. Please check if you have connected the right
sound signal to AV in (S-Video or Video input). Only one of the two video inputs can be connected to sound,
but both video signals can be connected. This means that only one of the two sound inputs can be heared in
S-Video and Video (CVBS) mode.
Remote Control does not work.
• Check the batteries. If necessary, replace them with two AAA heavy duty (zinc chloride) or alkaline batteries.
• Clean the remote control as well as the remote control sensor on the front of the TV.
• Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then reinsert
the plug into the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
• Make sure a fuse has not blown at the power outlet.
• Always point the remote control toward the front of the TV (toward the remote sensor).
•Make sure that you use the supplied Magnavox Remote control, only the supplied Magnavox Remote control
can be used with this LCD-TV set.
TV displays wrong channel or no channels.
• Repeat channel selection.
• Add the channel number(s) into the TV’s memory. Use STORE. Details are on page 20.
• Make sure TUNER MODE is set correctly. Details are on page 18.
Then activate AUTO PROGRAM to set up all available channels. Details are on page 19.
Poor Sound
• Check if AVL (audio settings menu) is switched on [yes].
• Select personal smart sound mode and optimize in the Audio onscreen menu the treble and bass settings.
• Make sure that your external device, for instance VCR, DVD or other AV device has a good quality sound output.
Noisy Picture
• Select the Weak signal Smart Picture Mode, in this mode noise from bad quality video signals will be suppressed.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND CLEANING
WARNING concerning stationary images on the TV
Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the
LCD panel.
Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not
leave nonmoving images on screen for extended periods of time. Do not display the same images too
frequently; if you do, subtle “ghost” images can be left on the LCD screen. Sources of stationary images may be
Laser discs, video games, Compact Discs Interactive (CD-i), or paused Digital Video Discs (DVDs) or video tapes.
Here are some common examples of stationary images:
• DVD menus list DVD content.
• Letterbox black bars appear at the top and bottom of the TV screen when a wide screen (16:9) movie is
viewed on a TV with standard (4:3) aspect ratio. This is available with some DVDs.
• Video game images and scoreboards
• Television station logos cause a problem if they are bright and stationary. Moving or low-contrast graphics are
less likely to damage the picture tube.
• Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news.
• Shopping channel logos, pricing displays may be bright and may appear constantly during the show.
These are usually in the same location on the TV screen.
TV Location
• To avoid cabinet warping, cabinet color changes, and an increased chance of TV failure, do not place the TV
where temperatures can become excessively hot (for example, in direct sunlight or near a heating appliance).
• Allow a free flow of air around the TV.
Cleaning
• To avoid possible shock hazard, remove the TV’s power cord from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, non-scratching duster.
• When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using
anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened with water.
Use even, easy, vertical strokes when cleaning.
• Occasionally vacuum the vents on the rear of the TV.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet. They may blemish the cabinet
permanently.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
A
S
Antena Connection................................................................9
Auto Program...................................................................4.19
Sound...................................................4.8.22.24.33.36
Stereo........................................................4.8.10.24.33
B
T
Balance........................................................................4.24.33
Bass.............................................................................4.24.33
Batteries............................................................................... 6
Brightness......................................................................23.32
Tint............................................................................23
Treble................................................................4.24.33
Troubleshooting........................................................33
W
C
Warranty..............................................................1.2.42
Welcome.....................................................................4
Cable Box Connections.......................................................10
Cable TV Connection............................................................9
Care and Cleaning...............................................................37
Channel Edit........................................................................20
Closed Captions...................................................................31
Color.....................................................................................23
F
Factory Service...............................................................41.42
Factory Service Information................................................41
Factory reset .......................................................................21
I
Index....................................................................................38
L
Language...........................................................................4.17
Limited Warranty.................................................................42
M
Mono...........................................................................8.24.33
P
PC (Monitor) Connection....................................................15
R
Regulatory.....................................................................39. 40
38
Download from Www.Somanuals.com. All Manuals Search And Download.
REGULATORY
FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE (U.S. ONLY)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Use only RF shielded cable with ferrite core when connecting this monitor to a computer device.
•
•
•
RF shield cable with ferrite core can be obtain from multiple retail outlets or Philips Factory Service Center.
The RF shield cable with ferrite core part number is 3138 198 71441.
If your RF shield cable without ferrite core, you can obtain the ferrite core from Philips Factory Service
Center, installation as following.
1. Open the ferrite core.
2. Locate the video connector that goes to the computer and
plugs into the unit. Place the ferrite core as close to the
video connector as possible, as shown in the figure below.
Interface cable
Ferrite Core
Installation
To ensure compliance of this unit to the
Class B limits of the FCC Rules, Part 15,
Video connector
Subpart B.
This kit must be utilized when
“non-ferrited” video cables are used
with this unit. This instruction sheet
gives the details for proper installation.
Ferrite Core
3. Lock the ferrite core.
Additional FCC information may be
found in the radio frequency interference
statement located in the user’s manual.
4. Place two cable tie wrap on either side of the ferrite core
to prevent it from sliding down the cable, as shown in the
figure below.
Cable tie
5. Draw the tie wraps tight and cut off the excess leads.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT
REGULATIONS.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
REGULATORY
COMMISSION FEDERALE DE LA COMMUNICATION (FCC DECLARATION)
Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de
l’article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les
interférences nuisibles dans le cadre d’une installation résidentielle. CET appareil produit, utilise et peut émettre
des hyperfréquences qui, si l’appareil n’est pas installé et utilisé selon les consignes données, peuvent causer des
interférences nuisibles aux communications radio. Cependant, rien ne peut garantir l’absence d’interférences dans
le cadre d’une installation particulière. Si cet appareil est la cause d’interférences nuisibles pour la réception des
signaux de radio ou de télévision, ce qui peut être décelé en fermant l’équipement, puis en le remettant en fonction,
l’utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes:
•
•
•
•
Réorienter ou déplacer l’antenne de réception.
Augmenter la distance entre l’équipement et le récepteur.
Brancher l’équipement sur un autre circuit que celui utilisé par le récepteur.
Demander l’aide du marchand ou d’un technicien chevronné en radio/télévision.
Toutes modifications n’ayant pas reçu l’approbation des services compétents en matière de conformité est
susceptible d’interdire à l’utilisateur l’usage du présent équipement.
N’utiliser que des câbles RF blindés avec ame en ferrite pour les connections avec des ordinateurs ou périphériques.
•
Vous pouvez vous procurer le câble de blindage RF avec tore magnétique dans les différents magasins de détails ou au centre
de service d’usine Phillips.
•
•
Le numéro de pièce du câble de blindage RF avec tore magnétique est 3138 198 71441.
Si votre câble de blindage RF ne possède pas de tore magnétique, vous pouvez l’obtenir auprès du centre de service d’usine
Phillips. Suivez les instructions ci-dessous pour l’installation.
1. Open the ferrite core.
2. Locate the video connector that goes to the computer and
plugs into the unit. Place the ferrite core as close to the
video connector as possible, as shown in the figure below.
Interface cable
Ferrite Core
Installation
To ensure compliance of this unit to the
Class B limits of the FCC Rules, Part 15,
Video connector
Subpart B.
This kit must be utilized when
“non-ferrited” video cables are used
with this unit. This instruction sheet
gives the details for proper installation.
Ferrite Core
3. Lock the ferrite core.
Additional FCC information may be
found in the radio frequency interference
statement located in the user’s manual.
4. Place two cable tie wrap on either side of the ferrite core
to prevent it from sliding down the cable, as shown in the
figure below.
Cable tie
5. Draw the tie wraps tight and cut off the excess leads.
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL
BROUILLEUR DU CANADA.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Labor & One (1) Year Parts & One (1) Year Display
MAGNAVOX warrants this product against defect in material TO OBTAIN WARRANTY SERVICE IN THE U.S.A.,
or workmanship, subject to any conditions set forth as follows:
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
Contact Magnavox Customer Care Center at:
1-800-705-2000
PROOF OF PURCHASE:
You must have proof of the date of purchase to receive war-
ranted repair on the product. A sales receipt or other docu-
ment showing the product and the date that you purchased the
product as well as the authorized retailer included, is consid-
ered such proof.
TO OBTAIN WARRANTY SERVICE IN CANADA…
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. MAGNAVOX SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
COVERAGE:
(If this product is determined to be defective)
LABOR: For a period of ninety (90) days from the date of pur-
chase, Magnavox will repair or replace the product, at its
option, at no charge, or pay the labor charges to any Magnavox BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-
authorized service center. After the period of ninety (90) days,
Magnavox will no longer be responsible for charges incurred.
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
PARTS: For a period of one (1) year, Magnavox will supply, at
no charge, new or rebuilt replacement parts in exchange for
defective parts. Magnavox authorized service centers will pro-
vide removal and installation of the parts under the specified
labor warranty.
Some states do not allow the exclusions or limitation of inci-
dental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. In addition, if you enter into a
service contract agreement with the MAGNAVOX partnership
within ninety (90) days of the date of sale, the limitation on
how long an implied warranty lasts does not apply.
DISPLAY: For a period of one (1) year from the date of pur-
chase, Magnavox will supply, at no charge, a new or rebuilt
active display device in exchange for the defective display.
Magnavox authorized service centers will provide removal and
installation of the parts under the specified labor warranty.
(PTV screens carry a thirty (30) day replacement warranty.)
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
• Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation
or repair of antenna systems outside of the product.
• Product repair and/or part replacement because of improper
installation, connections to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized repair or other cause
not within the control of Magnavox.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for
which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifica-
tions.
• Damage occurring to product during shipping when improp-
erly packaged or cost of associated packaging.
• Product lost in shipment and no signature verification of
receipt can be provided.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Products sold AS IS or RENEWED.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026
(Warranty: 4835 710 28125)
Download from Www.Somanuals.com. All Manuals Search And Download.
|