Owner's Manual
ZC357MGX
DIGITAL VIDEO DISC RECORDER WITH DIGITAL TUNER
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE
USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.MAGNAVOX.COM/SUPPORT
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
© 2009 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Record
Prepare 5.
4.
f
n
i
o
For more info,
please contact 1-800-605-8610
or visit : http://www.magnavox.com/support
Insert a recordable disc (refer to steps
1 - 3 on page 39 in the Owner's Manual
on how to insert a disc).
After all the connections are complete,
connect the AC power cord.
1
1
Insert two Size AA (R6) batteries.
2
Manual
Align the disc to
the disc tray guide.
Please read the supplied Owner's
Manual for the detailed instructions.
Press [STANDBY-ON ] to turn on the unit.
Turn on your TV.
3
4
5
Press [REC MODE] repeatedly to
select a recording mode.
2
3
Press the button on the TV’s remote control
that accesses the external input channel
repeatedly until you see "Initial Setup"
menu. (Please refer to your TV’s owner's
manual.)
Quick Guide
Digital Video Disc Recorder with Digital Tuner
ZC357MGX
Select the appropriate external input
channel by pressing [SOURCE] or
[CHANNEL / ].
Press [DTV/TV] to select analog TV or
digital TV, then use [CHANNEL / ]
or [the Number buttons] and [ • ] (for
digital TV channels) to select a
desired channel to record.
Antenna
Initial Setup
Select
2. 3.
Connect
Prepare
4. 5.
Record
1.
Connection
OSD Language
English
Français
Español
Select the language for Setup display.
Antenna Connection
1.
Press [REC] to start recording.
4
5
If the TV is connected by an HDMI cable,
it may take a while for the "Initial Setup"
menu to come up.
rear of this unit
IN
VIDEO VIDEO
IN
OUT
VHF / UHF
antenna
Y
L
L
HDMI OUT
Press [STOP C] to stop recording.
Use [K/L] to select your desired
language, then press [OK].
6
7
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
The recorded title will appear in the title list.
(Refer to "Guide to a Title List" on page 67.)
Use [K/L] to select the type of
broadcasting signal, then press [OK].
IN
RF coaxial
cable
Channel Preset
or
ANT. IN
Make sure the antenna is
connected to “ANTENNA IN” jack.
e.g.) DVD+R
RF coaxial
cable
cable TV
company
Antenna
Please finalize the disc when the writing is
completed before playing back on other DVD
players.
Cable (Analog)
Cable (Analog / Digital)
OUT
Your TV
ANTENNA
Writing to Disc
90%
“Auto Presetting Now”
This connection is for
TV loop through only
• Press [STOP C] to exit the title list.
If a PBS (public broadcasting station) is
available in your area, clock setting will
automatically be performed and the correct
clock will be displayed following the channel
preset procedure.
You will need to finalize DVD+R, DVD-RW
or DVD-R to play them back on other DVD
players. Refer to page 50 in the Owner's
Manual on how to finalize a disc.
Initial setting is then complete.
Press [RETURN] to exit.
If a PBS (public broadcasting station) is not
available in your area, press [OK]. Then
proceed to step 5 in "Manual Clock Setting"
on page 30 in the Owner's Manual.
E7S50UD
Printed in China
1VMN26798 ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
Select
Connect
2.
the appropriate connection
3.
HDMI Cable
Your TV
Progressive-compatible
Best
Your TV
High
Definition
TV
HDMI IN
HDMI cable
IN
VIDEO VIDEO
IN
OUT
Video
Audio
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
HDMI cable sends both audio and video digital signals.
(No additional audio connection is required.)
HDMI IN
HDMI cable
HDMI cable not included.
High Speed HDMI Cable (also known as HDMI category 2 cable) is
recommended for the better compatibility.
Do not tilt the connector when inserting
it into the HDMI jack, and make sure the
shapes of the jack and the connector are
matched.
Progressive-compatible(480p)
Better
COMPONENT
VIDEO IN
Y
Component Video Cable and Audio Cable
Your TV
IN
VIDEO VIDEO
IN
OUT
Y
PB/CB
PR/CR
L
L
HDMI OUT
P
B/CB
Component video cable
Your TV
Video
R
R
PR/CR
OUT
IN
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
AUDIO IN
COMPONENT
VIDEO OUT
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
COMPONENT
VIDEO IN
Standard
Definition
TV
Y
VIDEO
OUT
+
Component
video cable
PB/CB
PR/CR
L
Y
L
L
PB/CB
AUDIO IN
R
Audio cable
AUDIO IN
R
Audio
R
PR/CR
COMPONENT
VIDEO OUT
AUDIO OUT
Cables used in this connection are as follows:
• Audio cable (L/R) x 1 (Included)
• Component video cable x 1 (Cable not included.)
Audio cable
S-Video / Video Cable and Audio Cable
IN
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
Supports only 480i resolution.
Basic
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
S-VIDEO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
S-video cable
S-VIDEO IN
or
S-video cable
Video
Your TV
Standard
Definition
TV
VIDEO IN
Video cable
Your TV
OUT
or
Video cable
S-VIDEO
VIDEO IN
+
Audio
L
AUDIO IN
R
VIDEO
OUT
Audio cable
L
L
AUDIO IN
R
Audio cable
Cables used in this connection are as follows:
• Audio cable (L/R) x1 (Included)
• Video cable x1(Included)
• S-video cable x1 (Cable not included.)
R
AUDIO OUT
Manual
For more info,
f
n
i
o
Please read the supplied Owner's Manual for the detailed instructions.
please contact 1-800-605-8610 or visit : http://www.magnavox.com/support
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) DVD player, please contact our customer service center.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Supplied Accessories
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
remote control (NB883UD) with batteries (AAx2)
RF coaxial cable (WPZ0901TM005/WPZ0901TM002)
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)
owner's manual (1VMN26797)
Cleaning the disc lens
• If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
IR signal check
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
AM radio or a digital camera (including built-in camera of
cellular phone). It will help to define the cause
of malfunction.
•
With an AM radio:
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.
•
With a digital camera (including built-in
camera of cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control. If
infrared light appears through digital camera,
the remote control is working.
quick guide (1VMN26798)
Maintenance
Servicing
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 91-94 before returning the product.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn the unit to the standby mode,
unplug the power plug and please call our help line
mentioned on the front page to locate an Authorized
Service Center.
Cleaning the cabinet
• Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Trademark Information
is trademark of Eastman Kodak Company.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Dolby Digital Recording
“Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable
DVD discs. The technology, when utilized instead of
PCM recording, also saves recordable disc space, allow-
ing for higher video resolution or extended recording
time on each DVD. DVDs created using Dolby Digital
Recording will play back on all DVD-video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.
© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
Recording
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .9
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 37
BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 38
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Recording the DTV Closed Caption . . . . . . . . . . . . . . . . 38
BASIC RECORDING &
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 39
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 44
OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 45
Overwriting from the Beginning of the Title. . . . . . . . 45
Overwriting in the Middle of the Title. . . . . . . . . . . . . . 45
Hints for Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 47
Connection to an External Device. . . . . . . . . . . . . . . . . . 47
Recording from an External Device . . . . . . . . . . . . . . . . 48
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 49
PLAYING THE DISCS ON OTHER DVD PLAYERS . . . . 50
Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Connections
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Antenna Connection (Required) . . . . . . . . . . . . . . . . . . . 14
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connection to a TV with an HDMI™
Compatible Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting to a TV Using
Component Video Out Jacks . . . . . . . . . . . . . . . . . . . . . . 16
Connecting to a TV Using the S-Video Out Jack . . . . 16
Connecting to a TV Using Audio / Video Jacks. . . . . . 17
Connecting to a Cable / Satellite Box . . . . . . . . . . . . . . 18
Connecting to a TV without Audio / Video Jacks . . . 19
Digital Audio Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 20
Basic Setup
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Finding the Viewing Channel on Your TV . . . . . . . . . . 21
Guide to On-Screen Display / Menu. . . . . . . . . . . . . . . . 22
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 27
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Switching Analog Mode / Digital Mode . . . . . . . . . . . . 31
Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Playback
Editing
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 52
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 55
Playing Back an Audio CD and a CD-RW / -R
INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 67
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Deleting a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . 74
Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Erasing Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Making Edits Compatible. . . . . . . . . . . . . . . . . . . . . . . . . . 78
with MP3 / JPEG Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 58
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 59
Skipping TV Commercials During Playback. . . . . . . . . 59
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 60
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
SELECTING THE FORMAT OF AUDIO AND VIDEO . . 65
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 65
Switching Virtual Surround System . . . . . . . . . . . . . . . . 66
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 66
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Function Setup
LIST OF SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Others
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that.
The following features are offered with this unit.
Recording
Editing
This unit is compatible with DVD+RW/DVD-RW, which
are rewritable repeatedly and DVD+R/DVD-R, which are
available for recording once. Even if you choose DVD-RW/
DVD-R, these discs will automatically be recorded in the
DVD+VR mode.
Deleting titles:
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Up to 12 program recording:
You can program the unit to record up to 12 programs
within a one-month period. Daily or weekly program
recordings are also available.
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Setting pictures for thumbnails:
You can change pictures for thumbnails.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every
time [REC] is pressed during recording, the recording
time will be increased by 30 minutes up to 6 hours. The
recording automatically stops when the recording time
you set is reached or the disc is full.
Dividing titles (DVD+RW/DVD-RW only):
You can divide a title into 2 or more.
Putting name on disc:
You can put your favorite disc name.
Left channel stereo recording:
This unit can record the sound of the left channel monau-
ral input as left and right channels automatically
(the input from the L2 jacks only).
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Compatibility
Available for playing back discs on a regular DVD
player:
Recorded discs can be played back on regular DVD
players, including computer DVD drives compatible
with DVD-video playback. Although DVD+R are playable
on other units without finalization in most cases, it
is recommended to finalize in order to stabilize the
performance. For DVD-RW/-R, you need to finalize the
recorded discs to play back on other DVD players.
Automatic title list making:
The unit makes a title list with the index automatically.
Playback
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you can experi-
ence the theater surround sound from discs with sur-
round sound system.
Others
Progressive scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional television signals.
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by
title, chapter or time.
HDMI (High-Definition Multimedia Interface)
You can enjoy clearer audio/video output when connecting
this unit to a display device with an HDMI-compatible port.
Virtual surround system:
You can enjoy stereophonic space through your existing
2 channel stereo system.
Playing back MP3 / JPEG / Kodak Picture CD files:
You can enjoy MP3 / JPEG / Kodak Picture CD files which
are recorded on CD-RW/-R.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Symbols Used in this Owner’s Manual
To specify for what disc type each function is, we put
the following symbols at the beginning of each item to
operate.
* DVD-RW/-R recorded in VR mode or non compatible
recording format are not playable.
* DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 77).
* DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Symbol Description
For Recording, Playing Back, and Editing
Description refers to DVD+RW
Description refers to DVD+R
Description refers to DVD-RW
Description refers to DVD-R
For Playback only
Description refers to DVD-video
Description refers to audio CD
Description refers to video CD with PBC function
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
Description refers to CD-RW/-R with JPEG files
(Kodak Picture CD files included)
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel
1
2*
3
4 5* 6
7
10 9
8
14 13 12 11
( ) The unit can also be turned on by pressing these buttons.
*
1. Disc tray
9. VIDEO input jack (L2)
Use to connect external device with an RCA video
cable.
Place a disc when it is open.
2. A OPEN/CLOSE button*
Press to open or close the disc tray.
10. S-VIDEO input jack (L2)
3. CHANNEL
Press to change the channel up and down.
4. C STOP button
/
buttons
Use to connect the S-video output of external device
with an S-video cable.
11. Infrared sensor window
• Press to stop playback or recording.
• Press to stop the proceeding timer recording in
DVD.
Receive signals from your remote control so that you
can control the unit from a distance.
12. TIMER REC indicator
5. B PLAY button*
Press to start or resume playback.
6. I RECORD button
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
• Lights up when timer programming is set.
• Lights up during one-touch timer recording.
• Flashes when all timer programmings have been fin-
ished, or when a program cannot be performed by
some reason.
13. RECORD indicator
7. y STANDBY-ON button
Lights up when recording function works.
14. POWER indicator
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
• If timer programmings have been set, press to set
the unit in timer-standby mode.
8. AUDIO input jacks (L2)
Lights up when power is on.
Use to connect external device with an RCA audio
cable.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Rear Panel
1 2
3
4
5
IN
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
IN
OUT
S-VIDEO
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
AUDIO IN
COMPONENT
S-VIDEO AUDIO OUT
VIDEO OUT
ANTENNA
(
)
L1
12 11 10 9 8 7
6
1. ANTENNA IN jack
• Use to connect an antenna.
2. VIDEO IN jack (L1)
• Use to connect external device with an RCA video
cable.
3. VIDEO OUT jack
• Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
4. HDMI OUT jack
8. COMPONENT VIDEO OUTPUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
9. AUDIO OUT jacks
• Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
10. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device
with an S-video cable.
• Use an HDMI cable to connect to a display with an
HDMI compatible port.
5. AC Power Cord
11. AUDIO IN jacks (L1)
• Use to connect external device with an RCA audio
cable.
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
12. ANTENNA OUT jack
• Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV.
6. COAXIAL DIGITAL AUDIO OUTPUT jack
• Use to connect an AV receiver, Dolby Digital decoder
or other device with a coaxial digital input jack with
a digital coaxial cable.
7. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Using a Remote Control
Install the batteries (AAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
•
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
Open the cover.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
1
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
Insert batteries.
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
2
16 feet (5m)
30˚
23 feet (7m)
16 feet (5m)
30˚
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
Close the cover.
14
15*
1
2
3
3
16
17
18
4
5
19
20
21
6
7
22
23
24*
Note
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
8
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
25
27
9
26
10
12
13
11
28
29
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
( ) The unit can also be turned on by pressing these buttons.
*
1. DTV/TV button
Press to switch between digital TV mode (DTV) and
analog TV mode.
16.CHANNEL
Press to change the channel up and down.
17.HDMI button
/
buttons
• Press to set the HDMI connector’s video signal out-
put mode.
18.CLEAR button
2. STANDBY-ON y button
• Press to turn on the unit, or to turn the unit to the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
• If timer programmings have been set, press to set
the unit in timer-standby mode.
Press to clear the password once entered or to can-
cel the programming for CD or to clear the selected
marker number, etc.
19.AUDIO button
3. Number/Character buttons
• Press to switch the audio language for digital TV.
• Press to display the audio menu during playback.
20.TIMER button
Press to display the timer programming list.
21.TITLE button
Press to display the title list.
22.Cursor K / L / { / B buttons
Press to select items or settings.
• Press to select channel numbers.
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main
menu.
• Press to enter title names.
4. Confirm ( • ) button
Analog mode:
Press to confirm the channel selection made by
[the Number buttons].
Digital mode:
Press to confirm the major / minor channel selection
made by [the Number buttons].
5. DISPLAY button
Press to display the display menu on or off.
6. DISC MENU button
Press to display the disc menu.
7. OK button
Press to confirm or select menu items.
8. SETUP button
23.RETURN button
Press to return to the previously displayed menu
screen.
24.PLAY B button*
Press to start or resume playback.
25.NEXT G button
• During playback, press to skip to the next chapter,
track or file.
• When playback is paused, press repeatedly to play
back forward step by step.
26.STOP C button
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode.
• Press to stop playback or recording.
• Press to exit from the title list.
27.FFW D button
• During playback, press to play back fast forward.
• When playback is paused, press to play back slow
forward.
9. PREV H button
•During playback, press to return to the beginning of
the current chapter, track or file.
• When playback is paused, press repeatedly to play
back reverse step by step.
28.RAPID PLAY button
During playback, press to playback in a slightly fast-
er/slower mode with keeping the audio quality.
29.REC button
10.REW E button
• During playback, press to fast reverse.
• When playback is paused, press to play back slow
reverse.
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
11.CM SKIP button
During playback, press to skip 30 seconds.
12.PAUSE F button
Press to pause playback or recording.
13.REC MODE button
Press to switch the recording mode.
14.SOURCE button
Press to select the appropriate input.
15.OPEN/CLOSE A button*
Press to open or close the disc tray.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Read this first:
1) Disconnect the AC power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) After making all the connections, connect the AC power cords of the devices.
•
•
Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
Antenna Connection (Required)
rear of this unit
IN
RF coaxial
cable
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
ANT. IN
This connection is for
TV loop through only
IN
VHF / UHF
antenna
OUT
ANTENNA
or
RF coaxial cable
cable TV
company
Choose one of the following connections
depending on the jacks on your TV.
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before
moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• ANTENNA OUT jack is for tuner pass through only. DVD playback through the RF is not possible.
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
Overview
Refer to
If Your TV has
Higher
Quality
HDMI IN
page
15
If you are using
cable / satellite box
page
18
page
16
COMPONENT VIDEO IN
S-VIDEO IN
If your device has
only an ANT. IN jack
page
16
page
19
page
17
ANT. IN
Standard
Quality
R
L
AUDIO IN VIDEO IN
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connection to a TV with an HDMI™ Compatible Port
• HDMI outputs the video / audio signals without converting to analog signals.
• No audio connection is required.
HDMI IN
HDMI cable
HDMI OUT
rear of this unit
IN
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
ANT. IN
VHF / UHF
antenna
IN
This connection is for
TV loop through only
Do not tilt the connector when inserting it into the HDMI jack, and make sure the
shapes of the jack and the connector are matched.
or
RF coaxial
cable
RF coaxial cable
OUT
cable TV
company
ANTENNA
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
HDMI Mode and Actual Output Signals
Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.
On Screen Display
Video Output Signal
480 Progressive
480p
Press [HDMI]
720p
720 Progressive
1080 interlaced
1080 Progressive
Press [HDMI]
1080i
Press [HDMI]
1080p
Press [HDMI]
• The HDMI mode that is not supported by display device will be skipped.
• “---” will be displayed when it dose not have any information.
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display
device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection
system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device.
This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.
*HDMI: High Definition Multimedia Interface
Note
• Some devices with an HDMI input may not operate properly with this unit.
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit can be controlled
by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may be
limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device
such as this unit, audio signals are not output from the HDMI output connector.
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable,
the signals are output in digital RGB.
• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur. Please check and set
the HDMI setting again.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connecting to a TV Using Component Video Out Jacks
AUDIO IN
L
RCA audio cable
R
COMPONENT
VIDEO IN
(Green)
(Blue)
(Green)
(Blue)
Y
VIDEO
OUT
RCA component
cable
Y
PB
/CB
L
(Red)
(Red)
PR
/CR
R
COMPONENT
VIDEO OUT
AUDIO OUT
rear of this unit
ANT. IN
This connection is for
TV loop through only
IN
RF coaxial
cable
VIDEO VIDEO
IN OUT
Y
L
L
HDMI OUT
IN
PB/CB
VHF / UHF
antenna
R
R
P
R/CR
OUT
IN
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
AUDIO IN
COMPONENT
VIDEO OUT
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
OUT
or
RF coaxial
cable
ANTENNA
cable TV
company
Connecting to a TV Using the S-Video Out Jack
AUDIO IN
VIDEO
OUT
L
RCA audio cable
S-video cable
L
R
S-VIDEO IN
R
OUT
ANT. IN
AUDIO OUT
S-VIDEO
This connection is for
TV loop through only
IN
VHF / UHF
antenna
rear of this unit
IN
VIDEO VIDEO
IN OUT
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
RF coaxial
cable
OUT
or
RF coaxial
cable
ANTENNA
cable TV
company
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connecting to a TV Using Audio / Video Jacks
VIDEO IN
RCA video cable
RCA audio cable
VIDEO
OUT
AUDIO IN
L
L
R
R
AUDIO OUT
rear of this unit
IN
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
ANT. IN
This connection is for
TV loop through only
IN
VHF / UHF
antenna
RF coaxial
cable
OUT
ANTENNA
or
RF coaxial cable
cable TV
company
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connecting to a Cable / Satellite Box
RCA video cable
RCA audio cable
VIDEO IN
RCA video cable
VIDEO VIDEO
IN
OUT
R
L
AUDIO OUT VIDEO OUT
AUDIO IN
L
L
RCA audio
cable
L
R
cable/satellite box
R
R
IN
AUDIO IN
S-VIDEO AUDIO OUT
RF coaxial
cable
(
)
L1
rear of this unit
ANT.OUT ANT. IN
ANT. IN
IN
satellite
dish
VIDEO VIDEO
IN OUT
Y
L
L
HDMI OUT
This connection is for
TV loop through only
PB/CB
R
R
PR/CR
RF coaxial cable
OUT
IN
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
AUDIO IN
COMPONENT
VIDEO OUT
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
IN
RF coaxial
cable
or
cable TV
company
OUT
ANTENNA
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
• Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUT jack or
HDMI OUT jack for connecting to your TV.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the
cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connecting to a TV without Audio / Video Jacks
Set channel 3 or 4
ANT. IN
rear of this unit
IN
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
VHF / UHF
antenna
IN
VIDEO
OUT
RCA video
cable
L
OUT
ANTENNA
or
RF coaxial
cable
R
RF coaxial
cable
cable TV
company
AUDIO OUT
RCA audio cable
RF coaxial cable
R
L
3
4
TO TV
AUDIO IN VIDEO IN
CHANNEL
ANT. IN
RF modulator
Set channel 3 or 4
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Digital Audio Connection
Coaxial Cable Connection
Dolby Digital decoder
rear of this unit
COAXIAL
IN
VIDEO VIDEO
OUT
digital audio
coaxial cable
IN
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
COAXIAL
digital audio
coaxial input jack
HDMI Audio Connection
AV receiver / amplifier with an HDMI input jack
rear of this unit
IN
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
HDMI IN
PB/CB
R
R
HDMI cable
P
R/CR
OUT
ANTENNA
IN
S-VIDEO AUDIO OUT
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
AUDIO IN
COMPONENT
VIDEO OUT
S-VIDEO
(
)
L1
HDMI OUT
To set up “HDMI Audio” refer to pages 81 and 89.
To set up “Dolby Digital” refer to pages 79 and 84.
Audio format (disc)
Dolby Digital Setting of this unit
HDMI
Digital Output
2channel PCM
Dolby Digital
2channel PCM
Dolby Digital
PCM
Stream
PCM
Dolby Digital
2channel PCM
LPCM
Stream
Actual Output
Cables not included.
Please purchase the necessary cables at your local store.
Note
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as movie theaters.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
2 Channel Analog Audio Connection
VIDEO
OUT
stereo system
analog audio
input jacks
L
rear of this unit
AUDIO IN
IN
R
L
VIDEO VIDEO
IN OUT
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
R
AUDIO OUT
RCA audio cable
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your TV
After you have made all the
necessary connections, press
[STANDBY-ON y] to turn on the unit.
1
2
3
Turn on your TV.
• If connected to your VCR make sure it is
switched off or in standby mode before
proceeding.
Press “2” on the TV’s remote control,
then press channel down button
repeatedly until you see “Initial
Setup” menu.
Initial Setup
OSD Language
English
Français
Español
Select the language for Setup display.
This is the correct viewing channel (external
input channel) for the recorder.
• For some TVs, there may be a button on the
TV’s remote control that accesses the external
input channel. It may be labeled “SOURCE”,
“AV”, or “SELECT”. In such case, press it
repeatedly. Refer to your TV’s user manual for
details.
• If more than 10 minutes have passed since you
have turned on the unit, you may see the
MAGNAVOX screen saver instead of “Initial
Setup” menu.
MAGNAVOX screen saver:
Input Mode Names for Common TV Brands (Example)
Admiral AUX Panasonic TV/VIDEO
RCA INPUT, TV/VCR,
Curtis
LINE1, LINE2,
00, 90, 91, 92, 93
Mathis
00, 90, 91, 92, 93
GE
INPUT, TV/VCR, Samsung TV/VIDEO
00, 90, 91, 92, 93
Hitachi
JVC
INPUT, AUX
VIDEO, VIDEO 1, Sharp
VIDEO 2, VIDEO 3
Sanyo
VIDEO
00
Kenwood AUX
Sony
VIDEO1, VIDEO2,
VIDEO3
Proceed to step 2 in “INITIAL
SETTING” on page 25.
LXI-Series 00
Magnavox AUX CHANNEL
Toshiba
Zenith
TV/GAME
00
4
Note
• Video input selection varies for different brand’s
models of TVs.
• Consult your TV manufacturer if none of the above is
successful.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
Guide to On-Screen Display / Menu
The on-screen display changes in the following order
Disc Information / Menu
as you press [DISPLAY].
6
OFF
1/
5
1/
5
0:01:00 / 1:23:45
-RW
DTV Program Guide (only in DTV mode)
Disc Information/Menu
CH 10
5
1
2
Title Name Information
SP(2Hr)
1h53m
(only when DVD+RW/DVD+R/DVD-RW/DVD-R
is in playback)
4
3
or
File Name Information
* This is an example screen only for explanation.
Displayed items vary depending on the disc you
inserted.
(only when a CD with MP3 / JPEG / Kodak picture CD files
is in playback)
1. Indicates a disc type.
2. Indicates a channel number or selected external input
channel.
MP3 Tag Information
(only when an MP3 file is in playback)
3. Indicates a recording mode and possible recording
time left.
HDMI Information
(only for the images output through the HDMI output)
4. Indicates an operation status.
5. Each icon means:
: Search
: Audio
: Subtitle
: Angle
: Marker
DTV Program Guide
: Noise Reduction
: Zoom
1
2
3
4
5
6
7
8
PROGRAM TITLE NAME
69.1
WLIW-DT
ENGLISH
90
TV-PG
: Surround
INFORMATION-1
INFORMATION-2
INFORMATION-3
INFORMATION-4
INFORMATION-5
INFORMATION-6
: Repeat
6. Indicates the current title number/total number of
titles, the current chapter number/total number of
chapters, and time lapse of the current title playback/
total duration of the title.
1. Program title (max. 2 lines displayed)
2. Closed Caption (Indicates that the program being
broadcast is available with closed captioning.)
3. Signal strength (Indicates the signal strength of the
current channel.)
4. Program guide (max. 6 lines displayed)
5. Channel number
Title/File Name Information
Title Name Information
Title Name
My Title
6. Broadcast station
7. Audio language (“Other” is displayed when the
audio language cannot be acquired, or the acquired
languages are other than English, Spanish or French.)
8. Program rating
File Name Information
File Name
My File
Note
• When the program guide is displayed in more than 7
lines, use [K / L] to scroll.
• “No description provided.” is displayed when the
program guide is not provided.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Tag Information
• If you press [DISPLAY] one more time, album name
will be displayed.
Album Name
• If there is no artist, track or album name, “Not Available”
will be displayed.
HDMI Information
1
2
Video Info.
Audio Info.
:
:
480p
Bitstream
/
YCbCr
3
4
*1. Indicates the resolution of the HDMI output image.
*2. Indicates the HDMI video format.
*3. Indicates the HDMI audio format.
4. Indicates current disc status.
* “- - -” will be displayed, when it does not have any
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Main Menu
Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [OK] to display the
menu. These menus provide entries to all main functions
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
of the unit.
Setup
To call up the title list.
General Setting
1
4. Disc Edit:
Timer Programming
2
To set up the DVD setting.
Title List
3
Disc Edit
5. DISC Playback Mode:
4
DISC Playback Mode
5
To set up the disc playback setting.
• “DISC Playback Mode” is available only when an audio
CD, a video CD, a CD-RW/-R with MP3 / JPEG / Kodak
picture CD files is inserted into the unit.
General Setting Menu
1. Playback:
General Setting
1
To set up the unit to play back discs as you prefer.
2. Display:
2
Playback
Display
Video
Recording
Clock
Channel
HDMI
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
3
4
5
26
37
8
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
Reset All
Still Mode
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
To adjust the channel setting of the unit as you prefer.
7. HDMI:
To set up the HDMI connection setting.
8. Reset All:
To reset the setting to the factory default.
Disc Edit / DISC Playback Mode
1. Edit Disc Name:
Allows you to rename the disc.
<Disc Edit menu (DVD+RW)>
Disc Edit
2. Erase Disc: (DVD+RW/DVD-RW only)
Allows you to erase all contents in the disc and format it.
3. Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the disc if
you have added or deleted chapters, or made chapters
hidden on this unit, and to effect it when playing back
on the other unit.
1
Edit Disc Name
Erase Disc
Make Edits Compatible
2
3
4
Disc Protect OFF
ON
<Disc Edit menu (DVD-RW)>
Disc Edit
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
4. Disc Protect :
1
2
3
4
Edit Disc Name
Erase Disc
Finalize
Disc Protect OFF
ON
Allows you to protect a disc from accidental editing or
recording.
<Disc Edit menu (DVD+R/DVD-R)>
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (Audio CD only)
Allows you to activate the program playback feature.
7. PBC (Video CD only):
Disc Edit
1
23
34
Edit Disc Name
Finalize
Disc Protect OFF
ON
Allows you to select images or information on the
menu screen by activating PBC (playback control)
function.
<DISC Playback Mode menu (audio CD/VCD)>
8. Music:
DISC Playback Mode
15
26
37
4
Allows you to make setting for MP3 playback.
9. Photo:
Random Play
Program Play
PBC (Video CD only)
Allows you to make setting for JPEG playback.
10.Slide Show: (JPEG files only)
Allows you to select the display time of the slide show
mode.
<DISC Playback Mode menu (MP3/JPEG)>
DISC Playback Mode
18
29
15
Music
Photo
Random Play
Slide Show
1
1
0
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
Follow the procedure in “Finding the
Viewing Channel on Your TV” on
page 21 to display “Initial Setup”
menu.
1
2
Use [K / L] to select your desired
language, then press [OK].
Initial Setup
OSD Language
English
Français
Español
Select the language for Setup display.
Use [K / L] to select the type of
broadcasting signal, then press [OK].
3
Initial Setup
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
Auto Preset will scan all terrestrial channels.
This may take a while to complete.
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and digital TV
are automatically scanned and memorized. Only the
receivable channels in the area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and digital
CATV are automatically scanned and memorized.
CH
1
Auto Presetting Now
If a PBS (public broadcasting station) is available
in your area, clock setting will automatically be
performed and the correct clock will be displayed
following the channel preset procedure.
Initial setting is then complete.
Press [RETURN] to exit.
4
If a PBS (public broadcasting station) is not
available in your area, press [OK]. Then proceed
to step 5 in“Manual Clock Setting” on page 30.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Auto Channel Scan
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
2
3
4
Use [K / L] to select “Auto Channel
Preset”, then press [OK].
Use [K / L] to select the type of
broadcasting signal, then press [OK].
Auto Channel Preset
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in
your area.
• When aerial antenna is connected, select
“Antenna”.
• When connected to CATV, select “Cable
(Analog)” or “Cable (Analog / Digital)”.
To cancel the auto channel preset during
scanning:
Press [RETURN] to go the previous screen or
[SETUP] to cancel.
When scanning is over, press [SETUP]
to exit.
5
To cycle through only the memorized channels, use
[CHANNEL
/
].
To select a channel directly (including the ones not
memorized), use [the Number buttons] and [ • ] (for
digital TV channels).
Note
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
Adding / Deleting Channels
You may want to add or delete TV channels if your
channel lineup changes or if you no longer watch some
channels.
Adding channel is only available for the analog TV
channels.
Press [DTV/TV] to select the mode
(DTV or TV) to/from which you want
to add/delete channels.
1
2
Make sure
Press [SETUP] and use [K / L] to
select “General Setting”, then press
• You perform “Auto Channel Scan” before adding or
deleting the channels.
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
3
Use [K / L] to select “Manual Channel
Preset”, then press [OK].
4
Auto Channel Preset
Manual Channel Preset
TV Audio Select
• If you are adding or deleting analog TV/CATV
channels, go to
to continue.
ANALOG
• If you are deleting digital TV/CATV channels, go
to to continue.
DIGITAL
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
ANALOG
DIGITAL
Select the channel number to add or
delete.
Select the channel number to delete.
• Only the major channel is displayed in “Manual
Channel Preset” menu. (The channel number
displayed in the parenthesis is a virtual channel
number)
• Use [CHANNEL
/
] to cycle through only
5
6
5
the memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
• Use [CHANNEL
/
] to cycle through only
the memorized channels.
• You cannot use [{ / B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
Use [K / L] to select “Add” or
“Delete”, then press [OK].
Manual Channel Preset
Use [K / L] to select “Delete”, then
press [OK]. Then select the next
channel to delete.
6
CH
2
Add
Delete
• If the setting is complete, press [RETURN] to
activate “Manual Channel Preset”.
Manual Channel Preset
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
DTV
2
(CH - - - )
Add
Delete
Press [SETUP] to exit.
Your setting will be activated.
7
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
Press [SETUP] to exit.
7
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 30.
Auto Clock Setting
This unit can set the time and date automatically by
Press [SETUP] and use [K / L] to
select “General Setting”, then press
referring to a PBS station.
Make sure
1
2
3
4
[OK].
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to page 26.)
• If this unit is connected to a cable/satellite box,
select the local PBS station on them to set the clock
automatically.
“General Setting” menu will appear.
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Use [K / L] to select “Auto Clock
Setting”, then press [OK].
Use [K / L] to select “Auto”, then
press [OK].
Auto Clock Setting
OFF
Auto
Manual
Press [SETUP] to exit.
5
6
Press [STANDBY-ON y] to turn the
unit to the standby mode.
This unit will search for the time only when the
power is in the standby mode. Leave it in
standby for several minutes to give this unit time
to set the clock.
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
Select “Manual” at step 4, then press
[OK].
1
Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [OK].
Set Channel No.
2
CH
1
Note
• The clock may set itself automatically after you
connect the antenna/cable signal and plug in the
power cord.
Press [SETUP] and turn the unit to
the standby mode.
• Only the analog PBS channel signal is effective for
auto clock setting.
• The unit receives the clock data at 12:00 a.m. / p.m. from
the PBS channel when the unit is in the standby mode.
3
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Manual Clock Setting
Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
automatically adjust the time in order to fit the daylight
saving time.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
“ON (MAR - NOV)” has been selected as the default.
1
[OK].
“General Setting” menu will appear.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
1
[OK].
2
3
4
“General Setting” menu will appear.
Use [K / L] to select “Clock Setting”,
then press [OK].
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
2
3
4
Use [K / L] to select calendar or time,
then press [OK].
Use [K / L] to select “Daylight Saving
Time”, then press [OK].
Clock Setting
JAN / 01 / 2009 ( THU)
12 : 00 AM
Use [K / L] to select “ON (MAR -
NOV)”, “ON (APR - OCT)” or “OFF”,
then press [OK].
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[OK] when you finish setting all the
contents.
Daylight Saving Time
5
ON (MAR - NOV)
ON (APR - OCT)
OFF
ON (MAR - NOV):
Clock Setting
Move forward one hour on the second Sunday in
March and move back one hour on the first
Sunday in November.
JAN / 01 / 2009 ( THU)
12 : 00 AM
Your setting will be activated.
The clock start counting when you press [OK].
ON (APR - OCT):
Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
Press [SETUP] to exit.
Press [SETUP] to exit.
6
5
Note
• Your setting will be canceled if you press [SETUP]
before pressing [OK] at step 5.
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2008
up to 2058.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
About digital TV broadcasting:
Switching Analog Mode /
With its high definition broadcast, digital broadcasting far
surpasses analog broadcasting in both its picture and
sound quality.
Digital Mode
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control.
What is the minor channel?
By using high compression technology, digital
broadcasting offers a service that enables multiple signals
to send simultaneously.
Therefore, you can select more than one program per
major channel since digital broadcasting technology
distinguishes between multiple channels broadcast by a
single network.
Press [DTV/TV] on the remote control.
• The analog mode and digital mode switch alternately.
Channel Selection
[Air Time]
NTSC (analog mode)
ATSC (digital mode)
Select channels by using [CHANNEL
/
] or [the
18:00
18:30
19:00
19:30
20:00
Number buttons] found on remote control.
smallest smallest
CH4-1
CH
CH
[CHANNEL
/
]
Use [CHANNEL
/
] to change the channel.
CH4-1 CH4-2 CH4-3
CH4
[the Number buttons]
Press the channel number with [the Number buttons] to
select a channel you want to watch.
smallest
CH
CH4-1
CH4-3
smallest
CH
CH4-1 CH4-2
<Analog TV Channels>
Enter the channel number with [the Number buttons] to
select a channel you want to watch.
For 1-digit number
minor channel
major channel
e.g.) 2 ch:
[0] + [2], [2] + [•] or
: change automatically
: change manually by using [CHANNEL
[2] + leave it for 2 seconds.
/
]
For 2-digit number
e.g.) 12ch:
[1] + [2]
<Digital TV Channels>
Enter the major and minor channel number with [the
Number buttons] to select a channel you want to watch.
For 1-digit number
e.g.) 2.2 ch:
major channel
minor channel
[0] + [2] or [2] + [•]
[0] + [2], [2] + [•] or
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 35.16ch:
major channel
minor channel
[3] + [5]
[1] + [6]
• If you enter 1 digit for major channel and leave it for 2
seconds, the number will be taken as the major channel
and lowest minor channel of the major channel will be
displayed.
• If there is no minor channel input, lowest minor channel
of the major channel will be displayed.
Note
• It may take up to 5 to 7 seconds to switch the digital
TV channels.
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be
recorded.
Selecting TV Audio
Digital TV
Press [AUDIO] to cycle through
available audio languages.
English 1/2
1
• When you press [AUDIO], selected language
will be displayed on the TV screen.
• Every time you press [AUDIO], the language
will be switched.
e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3
• Available languages differ depending on the
broadcast.
• The language information display will
automatically disappear.
• When you record digital TV broadcasting, the
audio language you have selected will be
recorded.
Note
• You cannot change the audio language for the
recording of digital TV broadcasting.
• Pressing [AUDIO] does not control external device
audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO] does not display
anything.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Selecting TV Audio (cont’d)
Analog TV
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
2
3
4
Use [K / L] to select “TV Audio
Select”, then press [OK].
Use [K / L] to select “Stereo” or
“SAP”, then press [OK].
TV Audio Select
Stereo
SAP
Stereo:
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
Press [SETUP] to exit.
5
Note on recording analog TV audio
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “General Setting” menu
beforehand. Refer to the following table to check an
appropriate setting.
Selected
audio
Broadcast
audio
Disc
Audio
recording
output
Stereo
STEREO+SAP
STEREO
STEREO
STEREO
MONO
MONO
SAP
STEREO
STEREO
MONO
MONO
SAP
MONO+SAP
MONO
SAP
STEREO+SAP
STEREO
STEREO
SAP
STEREO
SAP
MONO+SAP
MONO
MONO
MONO
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
DTV Closed Caption
Digital TV
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Display”, then
press [OK].
2
Use [K / L] to select “DTV CC”, then
press [OK].
3
OSD Language
Screen Saver
DTV CC
CC Style
V-Chip
Use [K / L] to select “Caption
Service”, then press [OK].
4
5
DTV CC
Caption Service
Recording
Use [K / L] to the desired DTV closed
caption, then press [OK].
Caption Service
OFF
Service1
Service2
Service3
Service4
Service5
Service6
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
“Service 1” under normal circumstances.
Press [SETUP] to exit.
6
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Closed Caption Style
Digital TV
Digital TV can also change the style of its closed caption such as font, color or size, etc.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Display”, then
press [OK].
2
Use [K / L] to select “CC Style”, then
press [OK].
3
OSD Language
Screen Saver
DTV CC
CC Style
V-Chip
Use [K / L] to select “User Setting”,
then press [OK].
CC Style
4
5
User Setting
Font Size
Font Style
Font Opacity
Font Color
Edge Type
Edge Color
Back Opacity
Back Color
Use [K / L] to select “ON”, then press
[OK].
User Setting
ON
OFF
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
<Edge Type>
Edge type of the displayed caption can be
switched as below.
Use [K / L] to select the item and
switch the setting for each item you
want to set, then press [OK].
6
Edge Type
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User
Setting” will be displayed.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
• The setting description for each item is shown
below.
<Font Size>
Font size of the displayed caption can be
switched as below.
<Edge Color>
Edge color of the displayed caption can be
switched as below.
Font Size
Edge Color
Large
Middle
Small
White
Black
Red
Green
Blue
<Font Style>
Yellow
Magenta
Cyan
Font style of the displayed caption can be
switched as below.
Font Style
<Back Opacity>
Background opacity of the displayed caption can
be switched as below.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Back Opacity
Solid
Transparent
Translucent
Flash
<Font Opacity>
Font opacity of the displayed caption can be
<Back Color>
Background color of the displayed caption can
be switched as below.
switched as below.
Font Opacity
Solid
Back Color
Transparent
Translucent
Flash
White
Black
Red
Green
Blue
<Font Color>
Yellow
Magenta
Cyan
Font color of the displayed caption can be
switched as below.
Font Color
White
Black
Red
Press [SETUP] to exit.
Green
Blue
Yellow
Magenta
Cyan
7
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DVD RECORDING
Before you make a recording, read the following information.
Recordable Discs
Recording Mode
This unit can record to DVD+RW, DVD+R, DVD-RW and
DVD-R.
DVD+R/DVD-R can only be recorded to once. DVD+RW/
DVD-RW can be recorded to and erased many times.
DVD-RW/-R will be recorded in the DVD+VR mode
automatically in this unit.
You can select a recording mode among 6 options, and
the recording time will depend on the recording mode
you select as follows.
Recording Recording
Video/sound
quality
Disc size
8cm Disc
mode
time
18 min
36 min
(good)
HQ (1Hr)
SP (2Hr)
Logos
Attributes
SPP (2.5Hr) 45 min
LP (3Hr)
EP (4Hr)
SLP (6Hr)
HQ (1Hr)
SP (2Hr)
54 min
72 min
8cm/12cm, single-sided,
single layer disc
Approx. max. recording time
(SLP mode):
(poor)
(good)
108 min
60 min
DVD+RW
DVD+R
120 min
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
SPP (2.5Hr) 150 min
12cm Disc
LP (3Hr)
EP (4Hr)
SLP (6Hr)
180 min
240 min
360 min
DVD-RW
DVD-R
(poor)
• Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition the unit
may not read the disc properly.
• The recording time is only an estimate. The actual
recording time may differ.
• The audio and video quality gets poorer as the recording
time becomes longer.
• Each time [REC MODE] is pressed, recording mode and
its allowed recording time will be displayed.
Verbatim
DVD+R 8x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
JVC
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
Note
• This unit cannot record to CD-RW or CD-R.
Performance of any other discs are not guaranteed.
• All high definition pictures will be down converted to
the standard definition pictures when they are
recorded on this unit.
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
• You can play back DVD+RW on most DVD players
without finalizing. However, if you have added or
deleted chapters, or made chapters hidden, you
must perform “Make Edits Compatible” before being
able to see those effects on other units. (Refer to
page 78 for more details.) To play back discs other
than DVD+RW on other DVD players, you will need
to finalize.
Unrecordable Discs
• DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 77).
• DVD-R recorded in the mode other than +VR is not
recordable on this unit.
• You cannot record copy-protected program using
this unit. (Copy-protected signal is included in DVD-
video or some satellite broadcasts.)
• You cannot record “copy-once only” program on
DVD.
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE RECORDING
Make Recording Compatible
Setting for Auto Chapter
You can set a specified time for chapter marks.
Use this feature to make the unfinalized +VR mode discs
recorded on other unit recordable on this unit. When you
make an additional recording on this unit with “Make
Recording Compatible” set to “ON”, the title menu is
automatically converted to our style.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
“General Setting” menu will appear.
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
3) Use [K / L] to select “Auto Chapter”, then press [OK].
“General Setting” menu will appear.
4) Use [K / L] to select a desired time option, then
press [OK].
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
Auto Chapter
3) Use [K / L] to select “Make Recording Compatible”,
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
then press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Make Recording Compatible
ON
OFF
5) Press [SETUP] to exit.
ON:
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
Note
• The interval for auto chapter may be up to two
minutes different from the time option you set.
OFF: Prohibiting additional record to the disc that
has a title list created by other units.
• A blank chapter may be created depending on the
remaining time of the disc.
5) Press [SETUP] to exit.
Recording the DTV Closed Caption
You can record the DTV Closed Caption as the part of the
image for the recording program and see the recorded
closed caption even with the TV that is not closed caption
compliant.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
2) Use [K / L] to select “Display”, then press [OK].
3) Use [K / L] to select “DTV CC”, then press [OK].
4) Use [K / L] to select “Recording”, then press [OK].
• If “Caption Service” is set to “OFF”, you cannot select
“Recording”.
5) Use [K / L] to select “ON”, then press [OK].
Recording
ON
OFF
6) Press [SETUP] to exit.
Note
• If “Caption Service” is set to “OFF”, the caption will
not be recorded.
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
1
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
2
Align the disc to
the disc tray guide.
* Make sure the disc is compatible with this unit.
(Refer to page 37 for the list of compatible discs.)
Press [OPEN/CLOSE A] to close the
disc tray.
3
It may take a while to load
the disc completely.
• When inserting a brand-new DVD+RW/DVD-
RW, the unit automatically starts to format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 37.
4
SP(2Hr)
0h58m
Select the appropriate external input
channel by pressing [SOURCE] or
[CHANNEL
/
].
5
Press [DTV/TV] to select analog TV or
digital TV, then use [CHANNEL
/
]
or [the Number buttons] and [ • ] (for
digital TV channels) to select a
desired channel to record.
Refer to “Switching Analog Mode/Digital Mode”
and “Channel Selection“ on page 31.
CH 12
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [REC] to start recording.
“I” will be displayed for 4 seconds.
Press [STOP C] to stop recording.
The recorded title will appear in the title list.
(Refer to “Guide to a Title List” on page 67.)
6
7
e.g.) DVD+R
SP(2Hr)
0h58m
I
Please finalize the disc when the writing is
completed before playing back on other DVD
players.
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC] again to restart
recording.
Writing to Disc
90%
To set one-touch timer recording (OTR)...
1
SP(2Hr)
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC] repeatedly until the desired recording time
(30 minutes to 6 hours) appears on the TV screen.
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
2
EMPTY TITLE
1:41:17 SP(2Hr)
One-touch timer recording will start.
I
0h30m
• Press [STOP C] to exit the title list.
0h30m
(normal recording)
1h00m
6h00m
5h30m
To change the recording length during the one-
touch timer recording:
Press [REC] repeatedly until the desired length appear.
To cancel the one-touch timer recording within the
specified time:
Press [STOP C].
Note
• When you press [REC], recording starts immediately and continues until the disc is full or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 32-33 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed during one-touch timer recording. Press [DISPLAY] to see it on
the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the power to standby to stop one-touch timer recording.
- Using [REC] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• When one-touch timer recording is finished and the power is turned to standby, the unit will switch to the timer-
standby mode automatically if a timer recording has been programmed. Press [STANDBY-ON y] to cancel the
timer-standby mode to use the unit continuously.
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
You can program the unit to record up to 12 programs
Guide to Timer Programming Display
within a month in advance. Daily or weekly program
recordings are also available.
3
1
2
Timer Programming
Before recording, make sure
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
JAN/ 2/09 12:00 AM 69.1 SP
SP (1:00)
THU JAN/01 11:00AM
Date
Start
End
CH
JAN/02
12:00AM 1:00AM DTV69. 1
New Program
1/1
4
5
1 Title of a timer program (Contains date, time, channel,
recording mode of the program)
2 Current date and time
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (2 pages
maximum)
Press [TIMER].
1
Use [K / L] to select “New Program”,
then press [OK].
2
Timer Programming
THU JAN/01 11:00AM
Date
Start
End
CH
New Program
• If there are 6 or more programs, use
[H / G] to change pages.
Use [K / L] to enter the date, then
press [B].
3
Date
JAN/02
CH
Start
- - : - -
Mode
SP
End
- - : - -
DTV69. 1
SP
2h00m
JAN/01
Daily
When pressing [L] at
the current date, the
date will change as
follows.
MON-SAT
MON-FRI
SAT
e.g.) January 1st
Note
• If you have not set the clock yet:
FRI
Entry screen for the clock setting will appear instead
of the timer programming list at step 1. Continue
with the step 5 in “Manual Clock Setting” on page 30
before setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the timer programming.
SUN
JAN/31
• You cannot make a program whose recording time
exceeds 12 hours.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Use [K / L / s / B] or [the Number
buttons] to enter the start and end
Use [K / L] to select a recording
mode.
4
5
time, then press [B].
6
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
- - : - -
DTV69. 1
SP
SP
1h00m
DTV69. 1
SP
SP
2h00m
Refer to “Recording Mode” on page 37.
• You can check the remaining recordable space
of the disc when you select the recording mode.
• You cannot make a program which recording
time exceeds 12 hours.
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (L1 / L2), then press
[B].
DTV69. 1
SP
SP
1h00m
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
e.g.) external input mode
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
automatically to complete recording the program.
L1
SP
SP
1h00m
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
DTV69. 1
Auto
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Auto
1h00m
Use [K / L] or [the Number buttons] to select
the channel number to record, then press [B].
• “Auto” is only available for one program in the timer
program list.
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 43
for more details.
• The recording may be cut short when the available
recording space of the disc is too limited.
Press [OK] when all items are entered.
After displaying an instructive message for 10
e.g.) analog mode
seconds, timer program list will appear.
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
7
10
SP
Press STANDBY-ON toTimer Standby mode.
SP
1h00m
e.g.) digital mode
Timer Programming
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
JAN/ 2/09 12:00 AM 69.1 SP
SP (1:00)
Date
JAN/02
THU JAN/01 11:00AM
End CH
12:00AM 1:00AM DTV69. 1
Start
DTV69. 1
SP
SP
1h00m
Your program setting is now stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 43.
Press [STANDBY-ON y] to set a timer
programming.
TIMER REC indicator will light up on the front
panel.
8
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
How to select a channel number for the timer recording
Analog TV
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV
Digital TV
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV
minor channels
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.
To stop the timer recording in progress
If the timer program did not complete correctly,
the error number appears in the timer
programming list.
1) Press [STOP C ] on the remote control.
2) Confirmation message will appear. Select “Yes”,
then press [OK].
• To stop the timer recording immediately, press
[C STOP] on the unit.
Timer Programming
FRI JAN/02 11:00AM
Date
Start
End
CH
Checking, canceling, or correcting the timer
programming information
E41 JAN/02
12:00AM 1:00AM DTV69. 1
New Program
1) Press [STANDBAY-ON y].
2) Press [TIMER].
1/1
3) Check the information.
Each error number means:
Timer Programming
JAN/ 2/09 12:00 AM 69.1 SP
E1-22 Recording error other E41
E37-39 than below
Power failed
SP (1:00)
Date
JAN/02
THU JAN/01 11:00AM
End CH
Start
12:00AM 1:00AM DTV69. 1
New Program
E24
Unrecordable disc
E42
E43
E44
E45
E46
No disc when
recording
E25-26 Copy prohibited
program
Already 49 titles
recorded
4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [OK].
2 Use [K / L] to select “Delete”, then press [OK].
Confirmation window will appear.
E29
Disc protected
Already 254 chapters
recorded
E30
Disc full
Copy prohibited
program
3 Use [K / L] to select “Yes”, then press [OK].
4-B) To correct the timer program:
E35
E36
PCA full *1
It is impossible to
record additionally
on a disc recorded
by other units
when setting “
Make Recording
Compatible” to “OFF”.
Already finalized
video format disc
1 Use [K / L] to select the program you want to
correct, then press [OK].
2 Use [K / L] to select “Program Change”, then
press [OK].
3 Correct the timer program by using
[K / L / { / B], then press [OK].
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
5) Press [TIMER] to exit.
6) Press [STANDBAY-ON y] to return to the timer
standby mode.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Timer program with an error number will be cleared
once the entry screen for the program is displayed.
*1 PCA is a disc's space reserved for recording test.
Note
• Press [TIMER] to check the timer recording in progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been unplugged
for more than 30 seconds, the clock setting and all timer
programming will be lost.
• When the starting and the ending time are the same,
“Exceeds 12 hours” appears and the program setting will
not be accepted.
• If a disc is not inserted, TIMER REC indicator flashes and
timer recording cannot be performed. In some cases,
TIMER REC indicator will light up momentarily around
the start point as the unit attempts to record. Please
insert a recordable disc.
• When all the timer recording is completed, TIMER REC
indicator flashes. To play back or eject the recorded disc,
press [STANDBY-ON y] first, then select the recorded
title and press [PLAY B], or [OPEN/CLOSE A] to
remove the disc.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
you press [STANDBY-ON y] at step 8 on page 42.
• You cannot change the audio language for the timer
recording of digital TV broadcasting.
• During timer recording or timer standby mode (TIMER
REC indicator will light up), any operations on the unit will
not be available. To make these operations available,
press [STOP C] to cancel the timer recording or
[STANDBY-ON y] to release timer standby mode (TIMER
REC indicator will light off).
The Priority of Overlapped Settings
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minute or more, this
program will be displayed with error number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERWRITING UNNECESSARY TITLE
Overwriting from the Beginning of
the Title
Overwriting in the Middle of the Title
You can overwrite the existing title from the selected
position.
You can overwrite the existing title from the beginning.
1) Press [STANDBY-ON y].
Make sure that the TV input is set on the unit.
1) Follow the steps 1, 2 and 4 on the left.
2) Use [K / L] to select “Play”, then press [OK].
2) Load the disc that includes a title to be overwritten.
Playback will start.
It takes a while to display
the title list.
3) Press [PAUSE F] at the point from which you want
to start overwriting.
Title list will appear.
If the title list does not appear, press [TITLE].
4) Press [REC].
3) Press [REC MODE] repeatedly to select a recording mode.
“S I”, display menu, channel, and the time lapse will
be displayed as illustrated on the left.
Refer to “Recording Mode” on page 37.
4) Use [K / L] to select a title to be overwritten, then
press [OK].
5) Select the channel you want to record.
(Refer to page 31 on how to select a channel.)
1
SP (2Hr)
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
6) Press [REC] again.
Overwriting recording starts.
2
NOV/22/09 11:35AM CH13 EP
NOV/22/09 0:10:33
3
7) Press [STOP C] to stop recording.
EMPTY TITLE
1:37:52 SP(2Hr)
This operation may take a
while to be completed.
5) Use [K / L] to select “Overwrite”, then press [OK].
Note
1
SP (2Hr)
Play
Edit
Overwrite
• Recording mode of the overwriting title is the same
as that of the original (overwritten) title when
overwriting in the middle of the title.
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
2
6) Select the channel you want to record.
(Refer to page 31 on how to select a channel.)
• Title name will not be overwritten.
e.g.) DVD+RW
selected title number
to be overwritten
1
1
0:00:00
+RW
CH 12
SP(2Hr)
2h00m
F
I
7) Press [REC].
Overwriting recording starts.
The elapsed-time counter starts running.
8) Press [STOP C] to stop recording.
Title name is also overwritten.
This operation may take a
while to be completed.
Note
• The remaining recording time is displayed on the
bottom right corner of the TV screen during
overwriting.
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERWRITING UNNECESSARY TITLE
Hints for Overwriting
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion
please check if there is no important title after the overwriting point.
When overwriting title is shorter than the existing title:
(overwriting from the beginning of the title)
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B
title name : A
When overwriting title is longer than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
after
overwriting
existing title : B
title name : A
overwrite
recording : A
30 - 180 seconds will be cut off.
after
overwriting
existing title : B
existing title : C
title name : A
title name : C
When overwriting in the middle of the title:
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B*
title name : B
Overwritten section and the rest of the sections will
have the same title name as the original existing
title (B).
*
Note
• When a title name is overwritten, its thumbnail is also overwritten.
• “Auto Chapter” interval time is reset at the overwriting start point.
• A chapter mark is put at the beginning of the overwrite title when overwriting in the middle of the title.
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear).
Use S-video or the RCA audio/video cables for this connection.
or
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
VIDEO
OUT
AUDIO OUT
S-VIDEO
OUT
R
L
R
L
external device
(camcorder, VCR etc.)
RCA
RCA
RCA
RCA
or
S-video
cable
S-video
cable
video
cable
audio
cable
video
cable
audio
cable
or
VIDEO EO
IN
UT
L
R
IN
S-VIDEO
or
AUDIO IN
(
)
L1
L2
L1
to L2 IN
to L1 IN
IN
VIDEO VIDEO
IN
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
front of this unit
rear of this unit
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Use [K / L] to select “Video Input”,
then press [OK].
3
4
Use [K / L] to select desired external
input, then press [OK].
Video Input
L1 (Rear)
L2 (Front)
Use [K / L] to select the input jack
type to connect, then press [OK].
If you want to use VIDEO IN jack, select “Video
In”.
5
If you want to use S-VIDEO IN jack, select
“S-Video In”.
Press [SETUP] and use [K / L] to
L1 (Rear)
select “General Setting”, then press
Video In
1
2
[OK].
S-Video In
“General Setting” menu will appear.
Use [K / L] to select “Video”, then
press [OK].
Submenu will appear.
Press [SETUP] to exit.
6
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 47.
Turn on the TV and press
[STANDBY-ON y], and be sure to
select the input of the TV to which
the unit is connected.
1
2
3
Press [OPEN/CLOSE A] to open the
disc tray. Place the disc to record
properly.
Press [OPEN/CLOSE A] to close the
disc tray.
It takes a while to load
the disc.
Select the appropriate external input
channel (L1 or L2) by pressing
4
5
[SOURCE] or [CHANNEL
/
].
• If the external device is connected to the rear
of this unit, select L1.
• If the external device is connected to the front
of this unit, select L2.
• You can also select L1 or L2 channel by using
[the Number buttons].
e.g.) For L1, press [0], [0], [1].
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 31.
LP
(2Hr) (2.5Hr) (3Hr)
EP
SLP
(6Hr)
SPP
HQ
(1Hr)
SP
(4Hr)
Press [I RECORD] on the unit to start
recording.
6
7
8
Start playback on the external device
to record from.
2 3
4 8 6 1
Press [C STOP] on the unit to stop
recording.
This operation may take a
while to be completed.
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING A DISC TO PROTECT
To prevent accidental recording, editing or erasing the
titles, you can protect them from “Disc Edit” menu.
Press [SETUP].
1
2
3
Use [K / L] to select “Disc Edit”, then
press [OK].
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
Use [K / L] to select “Yes”, then press
[OK].
4
Protect this disc?
Yes
No
A disc will be protected.
This operation may take a
while to be completed.
Note
To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON” at step 3.
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect ON
OFF
To release the protection for the disc, select “Disc
Protect ON OFF” at step 3, then follow rest of the
procedures.
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS ON OTHER DVD PLAYERS
Finalizing a Disc
Press [SETUP].
You will need to finalize DVD+R, DVD-RW or DVD-R to
play them back on other DVD players.
1
Finalizing may take several minutes up to an hour.
A shorter recording period on the disc will require a
longer time period for finalization. Do not unplug the
power cord during finalization.
Use [K / L] to select “Disc Edit”, then
press [OK].
“Disc Edit” menu will appear.
2
3
4
Use [K / L] to select “Finalize”, then
press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Finalize disc?
Yes
No
Finalizing will start.
Finalizing
90%
To cancel finalizing...
(DVD-RW only)
• To cancel finalizing at step 4, press [STOP C], select
“Yes” with [K / L], then press [OK]. Finalizing is
canceled and the unit will be in stop mode.
Do you want to cancel ?
Yes
No
Finalizing
5%
• If
appears when pressing [STOP C], you cannot
cancel finalizing because the finalizing has been in
certain progress.
• When selecting “No” and press [OK] or [RETURN] ,
Note
finalizing will be continued.
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
• You cannot cancel finalizing the DVD+R/DVD-R once
it has started.
• There is no need to finalize DVD+RW.
• When you insert a DVD-RW finalized with this unit,
“Undo Finalize” will appear instead of “Finalize”.
This operation may take a
while to be completed.
Disc Edit
Edit Disc Name
Erase Disc
Undo Finalize
Disc Protect ON
Finalizing is completed.
OFF
5
To release the finalizing for the disc, select “Undo
Finalize” at step 3.
* DO NOT turn the power off or to the standby mode
during finalization, this will result in malfunction.
50 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS ON OTHER DVD PLAYERS
Auto Finalizing
Press [SETUP] and use [K / L] to
select “General Setting”, then press
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
timer recordings and at the end of the disc space.
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
2
3
4
Use [K / L] to select “Auto Finalize”,
then press [OK].
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press [OK].
Auto Finalize
Disc Full
End of Timer Rec
Use [K / L] to select “ON”, then press
[OK].
e.g.) “Disc Full”
5
Disc Full
ON
OFF
Your setting will be activated.
Press [SETUP] to exit.
6
Note
• This function is not available after finishing daily or
weekly program recording.
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Before you play back DVD, read the following information.
Playable Discs and Files
Unplayable Discs
This unit is compatible to play back the following discs.
To play back a DVD, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos will play back on the unit. Other disc
types are not guaranteed to play back.
The following discs will not play back on this unit.
• CD-ROM
• DVD-RAM
• DVD-ROM
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD)
• DVD-audio
• Unfinalized disc
• DVD or CD contains Windows Media™ Audio / DivX® files
• DVD-R or DVD-RW recorded in VR mode or non
compatible recording format
Playable discs
Logos
• Blu-ray Disc
• Super Video CD
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
• HD DVD
DVD-video
DVD+RW
DVD+R
Color Systems
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.
DVD-RW
(Finalized video mode discs only)
DVD-R
(Finalized video mode discs only)
Region Codes
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
CD-DA (audio CD)
video CD
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
CD-RW
CD-R
Kodak Picture CD
Playable files
Media
MP3
CD-RW/-R
JPEG
is a trademark of DVD Format/Logo Licensing Corporation.
52 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
PBC (playback control) for Video CD
Hint for DVD Playback
The contents of DVD are generally divided into titles.
Titles may be further subdivided into chapters.
You can select images or information on the menu
screen by activating the PBC (playback control) function
of the video CD.
This unit conforms to ver.1.1 and ver. 2.0 of video CD
standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback
picture as well as music CD.
DVD
title 1
title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
Ver.2.0 (with PBC function): While using a video CD with
PBC function, “PBC” appears on the TV screen.
audio CD, video CD
Note
track 1
track 2
track 3
track 4
track 5
file 5
• PBC setting turns to “ON” when loading video CD
with PBC function, thus, even after setting PBC to
“OFF” and ejecting the video CD then reloading the
video CD, this setting turns to “ON” automatically.
MP3, JPEG
file 3
• Some operations cannot be performed while PBC
function is on. Cancel PBC function temporarily to
perform those operations by following the
instruction below.
folder 1
file 1
folder 2
file 4
file 2
1) Press [SETUP].
2) Use [K / L] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
3) Use [K / L] to select “PBC (Video CD only)”, then
press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Your setting will be activated.
You can play back interactive software using menu
screens. Refer to instructions in the video CD.
EN 53
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Direct Playback
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
1
2
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
Align the disc to
the disc tray guide.
* Make sure the disc is compatible with this unit.
(Refer to page 52 for the list of compatible discs.)
Press [OPEN/CLOSE A] to close the
disc tray.
3
4
5
It may take a while to load
the disc completely.
Press [PLAY B] to start playback.
If you are playing back a DVD-video or video CD
with PBC function, a menu may appear.
Refer to “Using the Title / Disc Menu” on page
58.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 59.
Note
• Some discs may start playback automatically.
• You can select images or information on the menu
screen by activating PBC (playback control) function
(page 53).
54 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playback from the Title List
Use [K / L] to select a desired title,
then press [OK].
4
1
SP (2Hr)
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
2
NOV/22/09 11:35AM CH13 EP
NOV/22/09 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
• For video CD, when “PBC (Video CD only)” in
“DISC playback Mode” menu is set to “ON”, the
video CD main menu will appear when
inserting a disc. In such case, select a numbered
menu with [the Number buttons].
• Press [B] to display the next page, and press
[{] to display the previous page.
If you want to see disc information, press [{ ] when the
first page of the title list is displayed or press [ K ] when
the first title is selected but not when “Play”, “Edit” or
“Overwrite” is highlighted.
e.g.) DVD+RW
No Disc Name
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
Disc
DVD+RW
3
Total Titles
Disc Space Used
Disc Protect
Make Edits Compatible
0:30:48
OFF
1
Needed
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
2
e.g.) DVD+R
No Disc Name
Disc
DVD+R
5
Total Titles
Disc Space Used
Disc Protect
Finalize
1:30:48
OFF
Align the disc to
Finalized
the disc tray guide.
* Make sure the disc is compatible with this unit.
(Refer to page 52 for the list of compatible discs.)
1. Disc name (Default “No Disc Name”)
2. Disc type (DVD+RW/DVD+R/ DVD-RW/DVD-R)
3. Total number of title (include “EMPTY TITLE”)
4. Total time of recorded disc space
5. Status of disc protection (“ON” is protected disc.)
6. Making edits compatible/finalize
Press [OPEN/CLOSE A] to close the
disc tray.
3
It may take a while to load
the disc completely.
• When DVD+RW is inserted:
• Title list will appear automatically.
• To exit the title list, press [STOP C].
• To resume the title list, press [TITLE].
If the disc needs to be set “Make Edits Compatible”,
“Needed” is displayed. Otherwise, “Not Needed” is
displayed. (Refer to page 78.)
• When DVD+R, DVD-RW or DVD-R is inserted:
If “Finalize” is done, “Finalized” is displayed.
Otherwise, “Unfinalized” is displayed.
Note
• Some discs may start playback automatically.
• You can also start playback by pressing [PLAY B]
instead of [OK] at step 4.
EN 55
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Use [K / L] to select “Play”, then
press [OK].
5
6
1
SP (2Hr)
Play
Edit
Overwrite
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
2
NOV/22/09 11:35AM CH13 EP
NOV/22/09 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
Playback will start.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 59.
56 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW / -R with MP3 / JPEG Files
Follow steps 1 to 2 in “Direct
Playback” on page 54.
1
2
Press [OPEN/CLOSE A] to close the
disc tray.
It may take a while to load
the disc completely.
When an audio CD is inserted, track list will appear.
When a CD-RW/-R with MP3/JPEG files is
inserted, file list will appear.
When you insert a CD-RW/-R mixed with MP3/JPEG
files, the playback media selection screen will be
displayed.
For MP3, select “Music”, for JPEG, select “Photo”.
• To exit the track/file list, press [STOP C].
• To resume the track/file list, press [TITLE].
Use [K / L] to select a desired folder
or track/file, then press [OK].
e.g.) File list
3
File List
DISC NAME
Folder 1
Folder 2
MP3 file 1
MP3 file 2
MP3 file 3
MP3 file 4
MP3 file 5
MP3 file 6
1/ 2
When selecting track/file:
Playback will start.
When selecting the folder (Not available for audio CD):
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [OK].
• Press [PLAY B], [OK] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.
Hints for audio CD tracks and MP3 / JPEG files:
• Folders are shown by
• Audio CD tracks are shown by
.
.
• MP3 files are shown by
• JPEG files are shown by
.
.
• The system can recognize up to 255 folders, up to 99
tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “...”. Unrecognizable characters will
be replaced with asterisks.
• If there are no files in the folder, “No Files” will be displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
Note
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
• Files whose extension is other than “.mp3(MP3)” or
“. jpg / . jpeg (JPEG)” will not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back on this unit.
<MP3>
• Sampling frequency
• Constant bit rate
: 44.1 kHz or 48 kHz.
: 112 kbps - 320 kbps
<JPEG>
• Upper limit
• Lower limit
: 6,300 x 5,100 dots.
: 32 x 32 dots.
• File size of image maximum : 12 MB.
EN 57
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD and a
Using the Title / Disc Menu
CD-RW / -R with MP3 / JPEG Files (cont’d)
Kodak Picture CD
DVD or video CD with PBC function may contain a title
list, which describes the contents of the disc, or a disc
menu, which guides you through the available functions
in the disc.
The Picture CD is a service to convert photographs taken
by a conventional film camera into digital data and write
the data on a CD. You can enjoy picture images on the TV
set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that
provides developing service of Kodak Inc.
1)Press [TITLE] or [DISC MENU] to call up the title list
or disc menu.
2)Use [K / L / { / B] to make a selection, and then
1)Press [TITLE].
press [OK] to enable your selection.
Picture CD
Image 1
3)Press [STOP C] to exit.
1
4
2
5
3
6
Note
• You can select a numbered menu with [the Number
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [TITLE] or [DISC MENU] will not always be active
with all DVD.
• For video CD, when “PBC (Video CD only)” in “DISC
Playback Mode” menu is “ON”, the video CD main
menu will appear when inserting a disc.
1 / 2
• To exit the Picture CD thumbnail List, press [RETURN]
or [STOP C].
Arrow icons mean the title list includes a next or
previous page. You can quick review the six
thumbnails at once between the first and last pages
by pressing [H] / [G].
2)Use [K / L / { / B] to select a desired track to be
played back, then press [PLAY B] or [OK].
An image will be played back from the selected track
and go to the next one in turn.
Pause
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
3)Press [STOP C] to stop playback.
• Press [TITLE] to display the thumbnail again.
Notes on JPEG and Kodak Picture CD:
• After track is displayed for 5 seconds or 10 seconds
(set in “Slide Show” on page 62) the display moves to
the next track.
During JPEG or Kodak Picture CD playback, press [B]
or [{] to rotate a picture 90 degrees clockwise or
counterclockwise respectively.
F
(Not available when the display menu appears.)
2)Press [PLAY B] to return to the normal playback.
Note
• On DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 84.)
58 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Skipping TV Commercials During
Resume Playback
Playback
You can play back from where you stopped playing back
the disc last.
1)During playback, press [STOP C].
The resume message will appear.
You can skip TV commercials to enjoy the recorded
programs without interrupting.
During playback, press [CM SKIP].
Resume ON
Normal playback will start at 30 seconds ahead from the
point you press [CM SKIP].
Every time you press [CM SKIP], the searching point will
be extended by 30 seconds ahead.
2)Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn the unit to the standby
mode.
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
You can press [CM SKIP] up to 6 times (180 seconds).
e.g.) Press [CM SKIP] once.
CM Skip 30 sec.
(forwarding 30 seconds)
Note
• For MP3 / JPEG files, playback will resume from the
beginning of the file at which playback was stopped.
• Resume Playback is available when you play back the
video CD without PBC function.
B
• Some video CD with the PBC function resume
playback from the beginning of the track.
Playback will return to the normal playback.
Rapid Playback
Fast Forward / Fast Reverse Playback
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound quality just as
normal playback.
1)During playback, press [D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD) or files (for MP3 files) is not possible.
1)During playback, press [RAPID PLAY].
normal
speed
Press [RAPID PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
Bx0.8:
Bx1.3:
B :
40x
20x
5x
2x
20x
40x
playback
For video CD, approximate forward/reverse speeds are
2x, 8x, 16x.
For audio CD, MP3 files, approximate speed is fixed at
8x with sound (indicated with
Press [RAPID PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
/
).
Press [RAPID PLAY] 3 times to play back in
normal speed.
No effects.
2)Press [PLAY B] to return to the normal playback.
Note
• Forward/reverse speed will be indicated with icons
as follows.
2)Press [PLAY B] to return to the normal playback.
forward (approx. speed)
2x:
Note
• Audio (language) setting cannot be changed while
using this mode.
20x:
40x:
• This feature may not work at some point in a disc.
reverse (approx. speed)
5x:
• Audio is PCM during rapid playback mode except
when using digital audio connection.
• When using digital audio connection (COAXIAL), the
LPCM sound (2 channel) will be output.
20x:
40x:
EN 59
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Step by Step Playback
Zoom
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2)Press [G] repeatedly.
Playback will advance one frame (or step) at a time
when you press [G] with the sound muted.
To play back step by step backward:
Press [H] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
1)During playback, press [DISPLAY] to bring up the
display menu.
2)Use [{ / B] to select
menu.
to display the selection
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
• Press and hold [H] / [G] to reverse/ advance
continuously.
3)Press [PLAY B] to return to the normal playback.
Note
3)Use [K / L] to select a desired zoom factor to zoom,
• Only step by step forward playback is available for
playing back video CD.
then press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
× 1.2
× 1.5
× 2.0
Slow Forward / Slow Reverse Playback
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
1)During playback, press [PAUSE F]. Then press
[D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows. (The sound will remain
muted.)
Zoom area will be displayed.
pause
1/4x
1/8x
1/16x
1/16x
1/8x
1/3x
4)Use [K / L / { / B] to select a desired zoom
position, then press [OK].
2)Press [PLAY B] to return to the normal playback.
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
Zoom playback will start.
reverse (approx. speed)
1/16x:
1/8x:
1/4x:
Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• Only slow forward is available when playing back
video CD.
• To exit the zoom menu, press [RETURN] repeatedly
at step 3.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [OK].
• You cannot slide the zoomed picture on some JPEG
files.
60 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Marker Setting
Repeat Playback
Available repeat function may vary depending the discs.
1)During playback press [DISPLAY] to bring up the
display menu, then proceed to step 2), or press
[REPEAT] then proceed to step 3).
This feature allows you to assign a specific point on a disc
to be called back later.
If the display menu is already shown, skip to step 2.
2)Use [{ / B] to select
to display the selection
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
menu.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
2)Use [{ / B] to select
e.g.) DVD-video
to display the marker list.
3)Use [K / L] to select a desired repeat type, then
press [OK].
The selected repeat playback will start.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) DVD-video
OFF
Title
Chapter
A – B
3)Use [K / L] to select a desired marker number.
When it reaches the desired point, press [OK].
e.g.) audio CD, video CD
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Track
All
1
2
3
4
5
6
A – B
e.g.) MP3 / JPEG files
OFF
Track
All
Group
The title (track) number and the time will be displayed.
Title:
4)To return to the marker later:
Use [K / L] to select the desired marker number,
then press [OK].
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
Note
The current disc will be played back repeatedly.
• To clear a marker, select the marker number to be
A-B:
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
– Opening the disc tray
– Turning the unit to standby / off
– Record on a recordable disc
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
Note
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• You cannot select “Group” during the random playback.
• Repeat playback is not available when you play back
the video CD with PBC function.
• During the A-B repeat, if you reaches the point A with any
reverse playback, the reverse playback will be canceled
and the A-B repeat playback resumes from point A.
EN 61
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Random Playback
Program Playback
You can play back a disc randomly instead of playing
back in the original order.
You can program the disc to play back in your desired
order.
1)Press [SETUP].
1)Press [SETUP].
2)Use [K / L] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
For MP3, use [K / L] to select “Music”, then press [OK].
For JPEG, use [K / L] to select “Photo”, then press [OK].
2)Use [K / L] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
3)Use [K / L] to select “Random Play”, then press
3)Use [K / L] to select “Program Play”, then press
[OK].
[OK].
Random playback will start.
4)Use [K / L] to select a desired track, then press [OK]
Note
or [B].
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the TV
screen.
DISC Playback Mode
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
random playback.
Total 0:00:00
Slide Show
Repeat this step until you program all the desired
tracks.
You can select the display time between 5 seconds and
10 seconds.
5)Press [PLAY B].
DISC Playback Mode
Program Play
1)Follow steps 1 and 2 in “Random Playback” on this
page.
09 04 10 06 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
2)Use [K / L] to select “Slide Show”, then press [OK].
Total 0:31:07
3)Use [K / L] to select the display time, then press
[OK].
Program playback will start.
4)Press [SETUP] to exit.
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
Note
• Large-size JPEG files take a few moments to be
displayed.
• You may also select a desired track using [the
Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
program playback.
62 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Title / Chapter Search
Track Search
Using [H] / [G]
Using [H] / [G]
1)During playback, press [G] to skip the current
track/file and move to the next.
1)During playback, press [G] to skip the current
title or chapter and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [H].
Press it repeatedly to go to the previous track/file. The
track/file will move backward one at a time.
For JPEG files, press it once to go to the previous file.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.
To go back to the beginning of the current title or
chapter, press [H].
Press it repeatedly to go to the previous title or
chapter. The title or chapter will move backward one
at a time.
Using [DISPLAY]
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
Using [DISPLAY]
1)During playback, press [DISPLAY] to bring up the
display menu.
2)Use [{ / B] to select
e.g.) audio CD
, then press [OK].
2)Use [{ / B] to select
, then press [OK].
1/
5
0:00:15 / 0:05:00
e.g.) DVD-video
CD
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) MP3 files
1/
5
0:00:15
MP3
The number next to
3)Title:
will be highlighted.
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [OK].
The number next to
will be highlighted.
Title search will start.
Chapter:
Press [B] to move to the number next to
chapter.
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press [OK].
After the search, playback will start automatically.
3)Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[OK].
for
After the search, playback will start automatically.
Note
• During CD playback you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
Note
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
• Track search using [DISPLAY] is not available when
you play back the video CD with PBC function.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
total number
of titles
total time
of the title
total number
of chapters
EN 63
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Time Search
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) audio CD
1/
5
0:00:15 / 0:05:00
CD
The number next to
will be highlighted.
To move to the number next to
, press [B].
When time search is not available,
counter are not displayed.
and time
3)Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [OK].
After the search, playback will start automatically.
Note
• Time search is available only in the same track, file or
title.
• Time search is not available when you play back the
video CD with PBC function.
64 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in 1 or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during
playback.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back video CD, audio CD you can switch
“L/R”(stereo), “L”(left) or “R”(right).
1)During playback, press [DISPLAY] to bring up the
display menu.
1)During playback press [DISPLAY] to bring up the
display menu, then proceed to
step 2), or press [AUDIO] then proceed to step 3).
2)Use [{ / B] to select
to display the selection
menu.
• If the display menu is already shown, skip to step 2.
e.g.) DVD-video
2)Use [{ / B] to select
menu.
to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired audio soundtrack or
audio channel, then press [OK].
For DVD-video
• Audio soundtrack will switch.
3)Use [K / L] to select a desired subtitle language,
then press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch English
OFF
1.English
• If the title contains both main and sub audio, you can
further select “L” (main), “R” (sub), or “L/R” (mixed of
main and sub).
Subtitle will be displayed in the selected language.
When selecting “OFF”, subtitle will disappear.
For audio CD, video CD
• Audio channel will switch.
e.g.) audio CD
Note
• Some discs will only allow you to change the subtitle
from the disc menu. Press [TITLE] or [DISC MENU] to
display the disc menu.
1/
5
0:00:15 / 0:05:00
CD
• If a 4-digit language code appears in the subtitle
menu, refer to “LANGUAGE CODE” on page 95.
1. L/R
2. L
3. R
Note
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [TITLE] or
[DISC MENU] to display the disc menu.
EN 65
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System
Switching Camera Angles
Some DVD-video have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
1)During playback, press [DISPLAY] to bring up the
display menu.
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
2)Use [{ / B] to select
menu.
to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
then press [OK].
e.g.) DVD-video
Angle icon appears when a switching camera angle is
available.
Angle will switch each time you press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Note
• Angle icon does not appear on the TV screen in a
case you set “Angle Icon” to “OFF” in “Playback”
menu. Refer to page 84.
OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect
Reducing Block Noise
Note
• Select “OFF” in a case sound is distorted.
• The setting will be kept even when the unit is turned
off.
This function reduces noise in the playback picture.
1)During playback, press [DISPLAY] to bring up the
display menu.
2)Use [{ / B] to select
menu.
to display the selection
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired option, then press
[OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Your setting will be activated.
OFF
: When playing back titles with a few noises
such as DVD-video.
Type 1 : For the titles recorded in long time mode
such as EP or SLP mode.
Type 2 : Same as type 1, only more effective.
66 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DISC EDITING
Guide to a Title List
Editing Discs
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
You can edit discs for the following items. Be sure that
once you edit titles, they will not remain as original.
• Deleting a Title (Refer to page 68.)
• Putting Names on Titles (Refer to page 69.)
• Setting Chapter Marks (Refer to page 70.)
• Clearing Chapter Marks (Refer to pages 71-72.)
• Hiding Chapters (Refer to page 73.)
Press [TITLE].
1
1
SP (2Hr)
• Setting Pictures for Thumbnails (Refer to page 74.)
• Dividing a Title (DVD+RW/DVD-RW only)
(Refer to page 75.)
• Putting Name on Disc (Refer to page 76.)
• Erasing Disc (Refer to page 77.)
• Making Edits Compatible (Refer to page 78.)
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
2
Play
Edit
Overwrite
NOV/22/09 11:35AM CH13 EP
NOV/22/09 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
Note
6
• When selecting “Edit” on pop-up menu of the title
list and edit the title, the title list is displayed after
writing the edited contents onto the disc.
• The capacity indicator in the right side of the title list
may not indicate the precise capacity in the disc.
Edit
Title Delete
2
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
• The capacity indicator may not indicate the capacity
for the titles of which recording time is short.
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
NOV/22/09 11:35AM CH13 EP
1 : 05 : 00
11 10
9
8
7
1. Title list: List of the titles recorded on the disc, and
their information.
2. Arrow: Indicating there is a previous / next page.
3. Title information: On the first line, title name
(editable) is displayed. On the second line, the date
recorded and length of the title are displayed.
Empty title: The portion of the disc where there is no
recordings are made. As for the empty title, available
recording time by the selected recording mode is
displayed on the second line.
4. Recording mode: Currently selected recording mode
is displayed here.
5. Capacity indicator: Indicating the position and the
amount of each title in the disc. The portion for the
selected title is highlighted.
6. Thumbnails: A cut from the recorded content is
displayed here.
7. Submenu: Submenus for the selected menu are
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time, channel, and the recording
mode are displayed here.
9. Progress bar: Indicating the progress of the
playback.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Press [STOP C] to exit the title list.
EN 67
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Deleting a Title
You can delete a title which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
Use [K / L] to select “Edit”, then
press [OK].
For DVD+RW/DVD-RW, when the last recorded title in the
title list is deleted, the available disc space to record on
will be increased. For DVD+R/DVD-R, the disc space to
record on will not be changed.
3
4
SP (2Hr)
1
Play
Edit
Overwrite
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
2
NOV/22/09 11:35AM CH13 EP
NOV/22/09 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
Use [K / L] to select “Title Delete”,
then press [OK].
Edit
Title Delete
1
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
Confirmation message will appear.
Use [K / L] to select “Yes”, then press
[OK].
5
Edit - Title Delete
Yes
1
No
Press [TITLE].
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
1
After that, “Are you sure?” will appear, select
“Yes” and then press [OK].
Title will be deleted.
Data will be written onto the disc momentarily.
e.g.) DVD+R/DVD-RW/-R
Use [K / L] to select a desired title,
then press [OK].
2
SP (2Hr)
1
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
Please finalize the disc when the writing is
completed before playing back on other DVD
players.
2
NOV/22/09 11:35AM CH13 EP
NOV/22/09 0:10:33
Writing to Disc
90%
3
EMPTY TITLE
1:37:52 SP(2Hr)
This operation may take a
while to be completed.
After editing is complete, the title list will appear.
e.g.) DVD+RW/DVD-RW
SP (2Hr)
1
EMPTY TITLE
Note
0:21:14 SP(2Hr)
2
• Deleted part of the titles in the capacity indicator
changes in color.
NOV/22/09 11:35AM CH13 EP
NOV/22/09 0:10:33
3
• As for DVD+RW/DVD-RW if you delete the title, deleted
title will be displayed as “EMPTY TITLE”.
EMPTY TITLE
1:37:52 SP(2Hr)
68 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Names on Titles
You can put title names on the titles and change the
names from this menu.
Use [K / L] to select “Yes”, then press
[OK].
4
5
Edit - Edit Title Name
Yes
1
No
MY FAVORITE
1 : 05 : 00
The name you entered will be activated for the title.
After this operation is completed,
press [RETURN] to exit.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Guide to Edit Title Name
1)Use [K / L] to select a desired character set, then
press [OK].
2)Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
When you finish entering a title name, press [OK].
Follow steps 1 to 3 in “Deleting a
Title” on page 68 to display “Edit”
menu.
Select
1
2
ABC
abc
123
@ ! ?
Press
<space>
<space>
<space>
0
Use [K / L] to select “Edit Title
Name”, then press [OK].
! ”# $ % & ’( )
+ , - . / : ; < = >
*
(*1)
(*1)
1
Edit
? @ [ ] ^ _ { | }
Title Delete
1
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
GHI
ghi
JKL
jkl
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on this page.
wxyz
*1 Press
, character set will be changed to “ @!? ” mode
3
automatically.
to
Edit - Edit Title Name
*2 Press
, character set will be changed to the
previous input mode automatically.
A
a
B
b
2
!
C
c
3
?
1
character set
• To delete letters, press [CLEAR] repeatedly.
Holding [CLEAR] to delete all letters.
• Use [s / B] to move the cursor to the left and right.
1
@
• You can enter up to 30 letters.
M
1 : 05 : 00
Note
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
area for entering title names
EN 69
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Chapter Marks
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
Follow steps 1 to 3 in “Deleting a
Title” on page 68 to display “Edit”
menu.
1
2
3
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Press [PLAY B] and then [PAUSE F]
to decide the point at which you will
create a new chapter mark.
• It is convenient to use [H], [G],
[E] and [D] for finding the point to add a
new chapter mark.
Use [K / L] to select “Add”, then press
[OK].
4
Edit - Chapter Mark
Add
1
Delete
Delete All
Chapter
2/
3
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
Use [K / L] to select “Yes”, then press
[OK].
5
Edit - Chapter Mark - Add
Yes
1
No
Chapter
2/
3
F
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
A new chapter mark will be added.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
6
This operation may take a
while to be completed.
Note
• When the number of chapter marks in a title is 99
and the number of chapter marks in a disc is 254,
chapter marks cannot be added.
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
70 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Clearing Chapter Marks
Follow steps 1 to 3 in “Deleting a
Title” on page 68 to display “Edit”
menu.
1
2
3
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Use [H] / [G] to select a chapter
mark to be deleted, then press
[PAUSE F].
Chapter mark number is displayed on the
preview screen.
Edit - Chapter Mark
Add
1
Delete
Delete All
Chapter
2/
3
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
Use [K / L] to select “Delete”, then
press [OK].
4
5
Use [K / L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete
Yes
1
No
Chapter
2/
3
F
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
The selected chapter mark will be deleted.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
6
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
• You cannot delete the chapter mark 1.
EN 71
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Clearing Chapter Marks (cont’d)
To delete all chapter marks:
Follow steps 1 to 3 in “Deleting a
Title” on page 68 to display “Edit”
menu.
1
2
3
4
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Use [K / L] to select “Delete All”,
then press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete All
Yes
1
No
Chapter
2/
3
F
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
Use [K / L] to select “Yes”, then press
[OK].
5
6
Edit - Chapter Mark - Delete All
Are you sure?
1
Yes
No
Chapter
2/
3
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
All chapter marks will be deleted.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
72 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Hiding Chapters
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Follow steps 1 to 3 in “Deleting a
Title” on page 68 to display “Edit”
menu.
1
2
3
4
Use [K / L] to select “Hide Chapter”,
then press [OK].
Submenu will appear.
Use [H] / [G] to decide the
chapter to be hidden.
Use [K / L] to select “Hidden”, then
press [OK].
Edit - Hide Chapter
Visible
1
Hidden
Chapter
2/
3
Visible
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
The chapter is now hidden.
After this operation is completed,
press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
5
This operation may take a
while to be completed.
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible” at the step 4 on this
page.
Data will be written onto the disc momentarily.
After that, title list is displayed.
Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
SP (2Hr)
1
Hidden
NOV/21/09 11:00AM CH12 SP
NOV/21/09 0:20:44
2
NOV/22/09 11:35AM CH13 EP
NOV/22/09 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
EN 73
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Pictures for Thumbnails
You can set your desired scene as a thumbnail for each
title.
Follow steps 1 to 3 in “Deleting a
Title” on page 68 to display “Edit”
menu.
1
2
Use [H], [G], [E], [D], [PAUSE
F] and [PLAY B] to decide the
picture you want to select as a
thumbnail.
Use [K / L] to select “Index Picture”,
then press [OK].
3
Use [K / L] to select “Yes”, then press
[OK].
4
Edit - Index Picture
1
Yes
No
F
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
A picture for thumbnail will be set.
Press [RETURN] to exit.
Data will be written onto the disc momentarily.
5
This operation may take a
while to be completed.
Note
• If the selected picture for a thumbnail is overwritten,
the thumbnail is reset to the first scene of the title.
74 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Dividing a Title
Follow steps 1 to 3 in “Deleting a
Title” on page 68 to display “Edit”
menu.
You can divide one title into 2 new titles.
1
2
3
4
Use [H], [G], [E], [D], [PAUSE
F] and [PLAY B] to decide the point
at which you will divide the title.
Use [K / L] to select “Title Dividing”,
then press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit - Title Dividing
1
Yes
No
F
NOV/21/09 11:00AM CH12 SP
1 : 05 : 00
The title will be divided into 2 new titles.
Both title names are identical, and thumbnails
are reset to the first scene at this point.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
49, and the number of recording chapters reaches
the maximum of 254.
EN 75
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Name on Disc
You can put a name on the disc and change it from this
menu.
Press [STOP C] if you are playing back a disc.
Press [SETUP].
1
Use [K / L] to select “Disc Edit”, then
press [OK].
2
Use [K / L] to select “Edit Disc
Name”, then press [OK].
e.g.) DVD+RW
3
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
A window for entering a title name will appear.
Edit Disc Name
A
a
B
b
2
!
C
c
3
?
No Disc Name
1
Disc
DVD+RW
3
@
Total Titles
Disc Space Used
Disc Protect
0:30:48
OFF
Make Edits Compatible
Needed
To enter a disc name, follow the steps
of “Guide to Edit Title Name” on page
69.
4
5
When you finish entering a title name, press
[OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit Disc Name
Yes
No
No Disc Name
Disc
DVD+RW
3
Total Titles
Disc Space Used
Disc Protect
Make Edits Compatible
0:30:48
OFF
Needed
MY FAVORITE DISC
The name you entered will be activated for the title.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• You cannot select “Disc Edit” when finalized DVD+R
or DVD-R is inserted.
76 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Erasing Disc
Press [STOP C] if you are playing back a disc.
You can erase all titles on a disc.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 76 to display “Disc
Edit” menu.
1
2
Use [K / L] to select “Erase Disc”,
then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
Use [K / L] to select “Yes”, then press
[OK].
3
When you press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
Yes
No
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
The contents of the disc is now deleted.
Note
• When you select “Yes” at step 3, all contents of the
disc will be erased.
EN 77
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Making Edits Compatible
Press [STOP C] if you are playing back a disc.
If you have added or deleted chapters, or made chapters
hidden, you must perform “Make Edits Compatible” to
see those effects on other unit.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 76 to display “Disc
1
2
Edit” menu.
Use [K / L] to select “Make Edits
Compatible”, then press [OK].
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
Use [K / L] to select “Yes”, then press
[OK].
3
Activate the Make Edits Compatible?
Yes
No
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
78 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
The following table is the contents which you can set and the default setting.
Refer to the following table for useful operation.
Setup
Playback
Pages 82-84
Items (highlight is the default)
Parental Lock
Contents
Set the parental level for DVD playback.
OFF
level 8 [Adult] to 1 [Kid Safe]
Disc Audio
Dynamic Range
Control
Compressing the range of sound volume.
ON
OFF
PCM
Set whether the sound recorded in 96kHz will
be down sampled in 48kHz.
48kHz
96kHz
PCM
Dolby Digital
Set the type of sound signal which outputs
from the digital audio output jack.
Stream
Disc Menu Language
Set the language for disc menu language.
English
French
Spanish
Other
Audio Language
Set the language for audio.
Original
English
French
Spanish
Other
Subtitle Language
Set the language for subtitles.
OFF
English
French
Spanish
Other
Angle Icon
Still Mode
Set whether or not to display the angle icon.
Set the type of still image in pausing playback.
ON
OFF
Auto
Field
Frame
Display
Pages 85-87
OSD Language
Screen Saver
Set the language for OSD (on-screen display).
English
Français
Español
OFF
1 minute
5 minutes
Set the idling time before the screen saver
starts.
10 minutes
15 minutes
DTV CC
Caption Service
page 34
Set the type of the DTV closed caption.
OFF
Service1
Service2
Service3
Service4
Service5
Service6
Recording
ON
OFF
Set whether to record the DTV closed caption
or not.
page 38
CC Style
pages 35-36
User Setting
ON
OFF
Set the CC style setting whether or not is
effective.
Font Size
Font Style
Set font size of the displayed caption.
Large
Middle
Small
Set font style of the displayed caption.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Font Opacity
Set the font opacity of the displayed caption.
Solid
Transparent
Translucent
Flash
EN 79
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Setup
Display
Pages 85-87
Items (highlight is the default)
CC Style Font Color
pages 35-36
Contents
Set the font color of the displayed caption.
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Edge Type
Edge Color
Set edge type of the displayed caption.
Set edge color of the displayed caption.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Back Opacity
Back Color
Set back opacity of the displayed caption.
Set back color of the displayed caption.
Solid
Transparent
Translucent
Flash
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
V-Chip
MPAA Rating
TV Rating
X
Set the viewing limitation according to US
movie ratings.
NC-17
R
PG-13
PG
G
NR
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
Set the viewing limitation according to US TV
program ratings.
Canadian
English Rating
18+
14+
PG
G
Set the viewing limitation according to
Canadian English language ratings.
C8+
C
E
Canadian French 18ans+
Set the viewing limitation according to
Canadian French language ratings.
Rating
16ans+
13ans+
8ans+
G
E
Downloadable
Rating
Block Setting
To set the rating.
Clear Downloadable
Rating
Clear the downloadable rating information
and its setting.
Change
Password
Change the password.
Video
Page 88
Progressive Scan
TV Aspect
ON
Set to the progressive scan mode (set to "ON")
or to the interlace scan mode (set to "OFF").
OFF
Set a picture size according to aspect ratio of
your TV.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
80 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Setup
Video
Page 88
Items (highlight is the default)
Contents
Video Input
L1(Rear)
Set the video input type for the external input.
Video In
S-Video In
Video In
Page 47
L2(Front)
S-Video In
Recording
Auto Chapter
Page 38
OFF
Insert chapter marks at even time interval.
Set the unit to finalize the disc automatically.
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
ON
OFF
Auto Finalize
Page 51
Disc Full
End of Timer Rec ON
OFF
Make Recording Compatible
Page 38
ON
OFF
Set to prohibiting additional recording (OFF)
or to replace the title list after recording (ON).
Clock
Pages 29-30
Clock Setting
Auto Clock Setting
Set the clock.
Set the clock automatically.
OFF
Auto
Manual
Daylight Saving Time
Auto Channel Preset
Manual Channel Preset
Set the clock for the daylight saving time.
Tune the channels automatically.
Tune the channels manually.
ON(MAR-NOV)
ON(APR-OCT)
OFF
Channel
Pages 26-28
Antenna
Cable (Analog)
Cable (Analog / Digital)
TV Audio Select
Page 33
Set the analog TV audio type for output and
recording.
Stereo
SAP
HDMI
Page 89
Format
Set the color space for the HDMI output.
RGB
YCbCr
HDMI Audio
RGB Range
HDMI Control
Set whether to output the HDMI audio signal
or not.
ON
OFF
Set the black-white contrast level for HDMI
RGB output.
Normal
Enhanced
ON
OFF
Sets whether to utilize the HDMI CEC function.
HDMI CEC function allows your brand TV to
act in conjunction with this unit.
Reset All
Page 90
Yes
No
Set to the default setting.
Note
• Your change to each setting stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
EN 81
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback
Press [STOP C] if you are playing back a disc.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
2
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Playback”, then
press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Use [K / L] to select a desired item,
then press [OK].
3
Parental Lock
Disc Audio
1
2
3
4
5
6
7
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Submenu will appear.
Refer to
set the selected item.
to
on pages 83-84 and
1
7
4
5
When you finish with setting, press
[SETUP] to exit.
82 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Parental Lock (Default: OFF)
1
Note
• Press [CLEAR] to erase numbers entered incorrectly.
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4737 using
[the Number buttons] in password input window.
Password will be cleared and parental levels will be
set to “OFF”.
Use [K / L] to select the desired level, then press [OK].
Parental Lock
Disc Audio
2
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
Choose the appropriate audio setting for your external
device.
It will only affect a disc playback.
Use [
K
/
L
] to select a desired item, then press [OK].
2 [G]
1 [Kid Safe]
Disc Audio
A
If a password has not been set yet, proceed to
If a password has been set already, proceed to
.
.
A
B
Dynamic Range Control
PCM
Dolby Digital
B
C
Note
Dynamic Range Control (Default : ON)
A
• Parental lock function may not be available to some
discs.
Set to “ON” to compress the range between soft and loud
sounds.
Use [K / L] to select a setting, then press [OK].
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
Dynamic Range Control
• Record the password in case you forget it.
ON
OFF
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
Your setting will be activated.
Note
A password has not been set yet.
A
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
Use [K / L] to select “Yes”. Use [the Number buttons] to
enter a new password except for 4737, then press [OK].
Change Password?
Password Input
PCM (Default : 48kHz)
B
Yes
No
Yes
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
A password has been set already.
PCM
48kHz
96kHz
B
• Use [the Number buttons] to enter the current
password.
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
Password Input
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes”. Use [the Number buttons] to enter a new
password except for 4737, then press [OK].
Note
When playing back disc with copyright protection
<change the password>
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
Change Password?
Password Input
Yes
No
Yes
Your setting will be activated.
EN 83
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Dolby Digital (Default : Stream)
C
If “Other” is selected for
using [the Number buttons].
to
, press 4-digit code
3
5
Use [K / L] to select a setting, then press [OK].
Dolby Digital
Code Input
PCM
-
-
-
-
Stream
• When you finish entering the code, press [OK]. Refer
to the language code table on page 95.
Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Note
Stream : Outputs Dolby Digital signals
• Only the languages supported by the disc can be
selected.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press [CLEAR] or [s] to erase numbers entered
incorrectly.
Disc Menu Language (Default : English)
3
Set the language for disc menu.
Use [K / L] to select a setting, then press [OK].
Disc Menu Language
English
French
Spanish
Other
Angle Icon (Default : ON)
6
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
Angle Icon
Audio Language (Default : Original)
4
ON
OFF
Set the audio language.
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
Audio Language
Still Mode (Default : Auto)
7
Original
English
French
Spanish
Other
Select “Auto” usually.
Use [K / L] to select a setting, then press [OK].
Still Mode
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
Auto
Field
Frame
Subtitle Language (Default : OFF)
Your setting will be activated.
5
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
: Images in the still mode will be stabilized.
Set the subtitle language.
Use [K / L] to select a setting, then press [OK].
Field
Frame : Images in the still mode will be highly defined.
Subtitle Language
OFF
Note
English
French
Spanish
Other
•
Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
Your setting will be activated.
84 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display
Press [STOP C] if you are playing back a disc.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
1
2
3
Use [K / L] to select “Display”, then
press [OK].
Use [K / L] to select a desired item,
then press [OK].
OSD Language
Screen Saver
DTV CC
CC Style
V-Chip
1
2
3
4
5
Selection menu will appear.
Refer to
to
on pages 85-87 and
1
5
set the selected item.
• For
and
refer to pages 34-36.
4
5
3
4
When you finish with setting, press
[SETUP] to exit.
OSD Language (Default : English)
1
Set the language for the on-screen display.
Use [K / L] to select a setting, then press [OK].
OSD Language
English
Français
Español
Your setting will be activated.
Screen Saver (Default : 10 minutes)
2
Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [OK].
Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes
Your setting will be activated.
EN 85
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display (cont’d)
V-Chip
MPAA Rating
5
A
B
C
With the V-chip system in this unit, you can set the
TV Rating
viewing limitation for the analog/digital TV programs
received from the tuner or recorded on DVDs to prevent
your children from watching inappropriate programs. If
the unit detects a blocked program, a restriction message
appears and you are not allowed to view or record the
program.
Canadian English Rating
Canadian French Rating
D
You can set the viewing limitation according to MPAA
rating (US movie ratings), TV Rating (US TV program
ratings), Canadian English Rating (Canadian English
language Ratings) , Canadian French Rating (Canadian
French language Ratings).
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use [the Number
buttons] to set the access password, then press [OK].
The number you entered will be stored as the access
password.
1) Use [K / L] to select the desired rating, then press
[OK] repeatedly to switch between view and block.
When it is blocked a key icon will appear.
Password Input
e.g.) MPAA rating
MPAA Rating
X
2) Use [K / L] to select a desired item, then press [OK].
NC-17
R
V-Chip
PG-13
PG
G
A
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Change Password
B
C
D
E
NR
[MPAA Rating]
F
Rating
Category
Mature audience only
X
higher
NC-17
No one under 17 admitted
Restricted; under 17 requires
accompanying parent or adult guardian
R
PG-13
PG
Unsuitable for children under 13
Parental guidance suggested
General audience
G
lower
NR
No rating
[TV Rating]
Rating
TV-MA
TV-14
TV-PG
TV-G
Category
Mature audience only
higher
Unsuitable for children under 14
Parental guidance suggested
General audience
TV-Y7
TV-Y
Appropriate for all children 7 and older
Appropriate for all children
No rating
lower
None
[Canadian English Rating]
Rating
Category
18+
14+
PG
G
Adult audience only
higher
Unsuitable for ages under 14
Parental guidance suggested
General audience
C8+
C
For children over 8
For all children
lower
E
Exempt program
86 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display (cont’d)
[Canadian French Rating]
Rating
Downloadable Rating
E
Category
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
18ans+
16ans+
13ans+
8ans+
G
Adult audience only
higher
lower
Unsuitable for ages under 16
Unsuitable for ages under 13
Unsuitable for ages under 8
General audience
Downloadable Rating is currently not available.
E
Exempt program
• This message will also appear when you try to access
“Downloadable Rating“ after you have cleared the
downloadable rating information, and the new information has
not been downloaded since.
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you
can further set the sub ratings to block specific
elements of programming. Press [K / L/ { / B] to select
the desired rating or sub rating, then press [OK]
repeatedly to switch between view and block. Sub
rating status will appear on the side of the main rating.
To set the rating:
Use [K / L] to select “Block Setting” then press [OK] to
show the various types of ratings. Use [K / L] to select
a desired rating to set, then press [OK] to show the
levels for the rating. Use [K / L] to select a level, then
press [OK] to switch between view or block. If you set
one level to block, a key icon will appear and all the
higher levels will be blocked automatically.
To clear the downloadable rating information and its
setting:
Use [K / L] to select “Clear Downloadable Rating”, then
press [OK].
TV Rating
FV
V
S
L
D
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
Change Password
F
Sub Rating
Category
Fantasy Violence
Rating
TV-Y7
FV
V
Change the current password.
Use [the Number Buttons] to enter new access
password.
Violence
TV-PG
TV-14
TV-MA
S
Sexual Situation
Coarse Language
Suggestive Dialogue
L
Note
D
TV-PG, TV-14
• When you forget the access password at step 1),
enter 4737 using [the Number buttons] in the
password input window. Password will be cleared.
Note
• Depending on the type of rating system, you may set
the levels individually.
• Changing the main rating to block or view
automatically changes all its sub ratings to the same
(block or view).
EN 87
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Video
Progressive Scan (Default : OFF)
1
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
1) Use [K / L] to select “ON“, then press [OK].
Progressive Scan
ON
OFF
2) Use [{ / B] to select “Yes“, then press [OK].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
Activate?
Yes
No
3) Use [K / L] to select “Yes“ within 15 seconds, then
press [OK].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the HDMI or
component video cable (commercially available) to
connect this unit to the TV. (Refer to pages 15-16.) If
not, use the RCA video cable and set the progressive
scan to “OFF” or press and hold [SETUP] for more
than 3 seconds during DVD playback.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3),
progressive scan remains to be “OFF” (interlace scan).
Press [STOP C] if you are playing back a disc.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
1
2
3
Use [K / L] to select “Video”, then
press [OK].
TV Aspect (Default: 4:3 Letter Box)
2
Use [K / L] to select a desired item,
then press [OK].
You can select the TV aspect ratio to match the formats of
what you are playing back or watching digital TV
broadcasting with the unit and your TV screen (4:3
standard or 16:9 widescreen TV).
1
2
3
Progressive Scan
TV Aspect
Video Input
Use [K / L] to select a setting, then press [OK].
Submenu will appear.
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Refer to
the selected item.
to
on this page and set
1
2
If you have a standard TV:
4
5
• For
refer to page 47.
3
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
When you finish with setting, press
[SETUP] to exit.
88 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
HDMI
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Format
RGB
YCbCr
Your setting will be activated.
HDMI Audio (Default : ON)
2
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [OK].
• Set to “OFF” when the HDMI sound is not output.
HDMI Audio
ON
OFF
Your setting will be activated.
RGB Range (Default : Normal)
3
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [OK].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
Press [SETUP] in stop mode and use
RGB Range
[K / L] to select “General Setting”,
Normal
Enhanced
then press [OK].
1
2
Your setting will be activated.
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Use [K / L] to select
“HDMI”, then press
HDMI Control (Default : OFF)
4
[OK].
HDMI Control
ON
OFF
• You cannot select HDMI when an HDMI cable is
not connected and the items are shown in grey
color.
HDMI control allows integrated system control over HDMI
and is part of the HDMI standard.
Use [K / L] to select a desired item,
then press [OK].
When “HDMI Control” setting is set to “ON”, functions
listed below will be available.
One Touch Play
3
4
Format
HDMI Audio
RGB Range
HDMI Control
1
When this unit is turned on, the TV also is turned on
and the appropriate external input channel will be
selected automatically. The appropriate external input
channel can also be selected on your TV automatically,
when you press [PLAY B], [G], [H,], [DISC MENU],
2
3
4
[TIMER], [DTV/TV], [SETUP], [CHANNEL
[the Number buttons] when the unit’s power is on.
Standby
/
], or
When you finish with the setting,
press [SETUP] to exit.
When you press and hold [STANDBY-ON Q] for 2
seconds, it turns off the power to the standby mode of
the TV first and then turns the power of this unit also.
System Information
Format (Default : RGB)
1
Get & Set Menu Language
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
This unit recognizes the OSD language set for the TV
and automatically sets the same language as the player
menu language (OSD menu language) for this unit.
Use [K / L] to select a setting, then press [OK].
EN 89
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Reset All
Reset the setting to default.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Reset All”, then
press [OK].
2
Select “Yes” using [K / L] , then press
[OK].
3
Reset to factory default?
Yes
No
Select “Yes” again using [K / L] ,
then press [OK].
4
Are you sure?
Yes
No
Your setting in recording will be initialized.
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
– OSD language setting
– Channel setting
– Clock setting
– Parental lock setting
– V-chip setting
– Timer programming information
90 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
Remedy
The power does not turn on.
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).
There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• If the main menu appears on the TV screen, press [RETURN] to exit.
• Check the connection to your TV (pages 14-19).
• Check if the progressive scan mode is set correctly according to your TV (page 88).
• Switch the input selector on your TV (such as to “L1”) so that the signal
from the unit appears on the TV screen.
Picture noise appears.
• Clean the disc with a cleaning cloth.
Playback picture from the external
devices connected to this unit is
distorted.
• If the picture output signal from the external devices passes through
this unit to get to your TV, the copy protection signal applied to some
DVD could affect the picture quality. Disconnect the playback device in
question and connect it directly to your TV.
TV program reception does not fill
the TV screen.
• Try to set the channels with “Auto Channel Preset” or “Manual Channel
Preset” in “Channel” menu (pages 26-28).
• Select a channel of any TV program using [CHANNEL
/
].
TV program pictures are distorted.
• Adjust TV antenna.
• Adjust the picture. (Refer to the TV’s manual.)
• Place the unit and TV farther apart.
• Place the TV and any bunched RF coaxial cables farther apart.
TV channels cannot be changed.
Playback picture is distorted.
• Switch the input to TV.
• Connect the RF coaxial cable correctly (pages 14-19).
• Keep the device which may cause electrical disturbances, such as a
cellular phone, away.
No image from HDMI connection.
• Check the HDMI connection. (Check the status of the HDMI related indications.)
• Check whether the connected monitor device or other device supports HDCP.
(This unit will not output a video signal unless the other device supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
• If the unit is connected to the unauthorized display device with an HDMI cable,
the audio/video signal may not be output when playing back a commercial
DVD-video.
There is no sound.
• Clean the disc with a cleaning cloth.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• Check if the input device setting on the amplifier is correct.
• When the unit is in pause mode or in slow-motion playback mode,
sound is not output. This is not a malfunction.
• When the unit is in fast forward or fast reverse mode, sound is not
output. This is not a malfunction.
• If you are using COAXIAL DIGITAL AUDIO OUTPUT jack, check the
setting in “Disc Audio” (pages 83-84).
• The HDMI sound is not output when “HDMI Audio” is set to “OFF”.
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• While the setup menu or timer programming display is shown, or while
the screen saver is active, the audio is muted.
Sound is noisy.
• Clean the disc with a cleaning cloth.
No DTS sound is output.
Setup menu cannot be called up.
• This unit is not compatible with DTS sound.
• Setup menus cannot be called up during DVD recording or DVD
playback.
EN 91
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
The remote control does not
function.
• Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Check if the unit is turned on.
• Check if you are pointing the remote control at the recorder and NOT
the TV.
If you have a plasma TV, it may interfere with the IR signal. Try the
remote with the plasma off. If the remote works, you may need to move
the unit away from the plasma TV.
The disc does not play back.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 52).
• The region code on the DVD-video does not match the unit (page 52).
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates (page 3).
• If the disc was recorded on another recorder, the unit cannot play back
the disc if it was not finalized.
Discs recorded on this unit cannot
be played back on other DVD
players.
• If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the
disc after recording (page 50).
The disc does not start playback
from the beginning.
• Resume playback was activated (page 59). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first insert.
The unit starts playing back the disc • The DVD-video features an auto playback function.
automatically.
Some functions such as stop,
search, or slow-motion playback
cannot be performed.
• Depending on the disc, you may not be able to do some of the
operations. Refer to the manual supplied with the disc.
The language for the sound track
cannot be changed.
• The title does not have the multilingual audio tracks.
• The DVD-video prohibits the changing of the language for the sound
track.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD-video.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc
contains a multi-angle portion. Actual change will be performed when
the portion has come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
The channel cannot be changed
from the channel you are recording.
• Set the TV’s input to “TV.”
Nothing was recorded even though • There was a power failure during recording.
you set the timer setting correctly.
• The unit’s internal clock stopped due to a power failure that lasted for
more than 30 seconds. Reset the clock (pages 29- 30).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
Recording does not stop
immediately after you press
[STOP C].
• It may take a few seconds for the unit to input disc data before
recording stops.
Timer recording is not complete or
did not start from the beginning.
• The timer setting overlapped with another setting that has priority
(page 44).
• Disc space was not enough.
92 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
The unit does not operate
properly.
• When static electricity, etc., causes the unit to operate abnormally, unplug
the unit and then plug it in again.
The disc tray does not open when • It may take a few seconds for the disc tray to open after you have
you press [OPEN/CLOSE A].
recorded or edited a disc. This is because the unit is adding disc data to
the disc.
“Repairing” appears on the TV
screen.
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
Repairing
In a case you intend to cancel the
repairing process.
• If you intend to cancel the repairing process, press [A OPEN/CLOSE]
on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Do you want to cancel a repairing process ?
When selecting “Yes”, the disc may not be
usable.
Yes
No
Repairing
EN 93
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Disc Error message
Cause
Solution
Disc Error
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert the standardized disc which bear
the marks on page 52.
• Insert the disc with the labeled side
facing up.
— Please eject the disc. —
Playback feature may not be available on
this Disc.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 83).
Recording Error
This program is not allowed to be
recorded.
• The recording function encountered
the copy prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in +VR
mode.
• You are trying to record the copy-once
program.
• You cannot record the copy-once
program.
Recording Error
Can not record on this disc.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 37).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• The disc is dirty.
• The disc is damaged.
Recording Error
This disc is protected and not recordable.
• You are trying to record on to the
protected disc which is set in “Disc Edit”
menu.
• Release the disc protect setting in “Disc
Edit” menu (page 49).
Recording Error
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Disc is full.
(No area for new recording)
Recording Error
• You are trying to record onto the disc
on which the number of recording titles
comes up to the maximum (49).
• Delete unnecessary titles (page 68).
You cannot record more than 49 titles on
one disc.
(The maximum is 49)
Recording Error
• You are trying to record onto the
DVD+RW or DVD-RW on which the
number of recording chapters comes
up to the maximum (254).
• Delete unnecessary chapter marks
(pages 71-72).
You cannot record more than 254 chapters
on one disc.
(The maximum is 254)
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Insert a new disc.
• Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record full
49 titles.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Release the finalizing for this disc
(page 50).
Recording Error
• You are trying to record onto the
disc that had been recorded by other
recorders.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 38).
The disc has no recording compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
94 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Frisian
Uzbek
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Hebrew
Hindi
EN 95
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
PBC (playback control) (video CD only)
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
This function enables you to play back interactive
software using a menu screen. See also “Video CD”.
PCM (pulse code modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Chapter
Progressive Scan (525p/480p)
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(525i/480i) TV signals. Refer to page 88 for instructions on
selective progressive scan mode.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video
(525p/480p), you can experience higher-density picture
than that in interlace (525i/480i).
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
SAP (secondary audio program)
Sub-audio channel which is delivered separately from
main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
Finalize
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
To make DVD, which have been recorded on, possible to
play back in DVD players. With this unit, it is possible to
finalize DVD+R, DVD-RW, and DVD-R.
HDMI™ (high definition multimedia interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with A collection of chapters on DVD. See also “Chapter”.
one cable connection.
Title
Track
JPEG (joint photographic experts group)
JPEG is a method of compressing still image files. You can
copy JPEG files on CD-RW/-R from a computer and play
back the files on this unit.
Audio CD use tracks to divide up the content of a
disc. The DVD equivalent is called a chapter. See also
“Chapter”.
Video CD
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
A digital format for store video data in compact disc.
96 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
Power requirements
120V AC, 60Hz
Power consumption
20W (standby: 2.0W)
Dimensions (width x height x depth)
Weight
16.6 x 2.4 x 9.8 inches (420 x 59 x 247mm)
5.3 lbs. ( 2.4kg )
Operating temperature
Operating humidity
TV system
41°F (5°C) to 104°F (40°C)
Less than 80% (no condensation)
ATSC / NTSC-M TV standard
Recording
Recording format
+VR (video recording) format
DVD+Rewritable, DVD+Recordable
DVD-Rewritable, DVD-Recordable (+VR mode only)
Recording discs
Video recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
Tuner
Tuning system
Channel frequency synthesized tuning system
Channel coverage (ATSC / NTSC)
Terrestrial
CATV
VHF 2~13, UHF 14~69
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A
Terminals
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
1Vp-p (75Ω)
Video input
RCA jack x 1
S-video input
Mini DIN 4-pin x 1
VHF/UHF/CATV input and output
F-type
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
75Ω unbalanced
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
2V rms (output impedance: more than 1kΩ)
1Vp-p (75Ω)
Audio output
RCA jack x 2
Video input
RCA jack x 1
Video output
RCA jack x 1
1Vp-p (75Ω)
S-video input
Mini DIN 4-pin x 1
S-video output
Mini DIN 4-pin x 1
Component video out
RCA jack x 3
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
500mVp-p (75Ω)
C: 286mVp-p (75Ω)
C: 286mVp-p (75Ω)
PB/CB: 700mVp-p (75Ω)
PR/CR: 700mVp-p (75Ω)
Coaxial digital audio out
RCA jack x 1
HDMI output
HDMI jack x 1
Note
• The specifications and design of this product are subject to change without notice.
EN 97
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Discos Reproducibles
Disco Grabable
Este aparato es compatible con la reproducción de los
siguientes discos y archivos.
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y
DVD-R.
Los discos DVD+R/DVD-R pueden ser grabados sólo una
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y
borrados muchas veces.
En este aparato los discos DVD-RW/-R serán grabados
automáticamente en el modo DVD+VR.
Discos reproducibles
DVD-video
Logotipos
Logotipos
Atributos
DVD+RW
DVD+R
Disco de 8 cm / 12 cm, un solo lado,
una sola capa
Tiempo de grabación máx. aprox.
(modo SLP):
DVD+RW
DVD+R
360 minutos (4,7 GB) (para 12 cm)
108 minutos (1,4 GB) (para 8 cm)
DVD-RW
(Sólo discos en modo de video finalizados)
DVD-RW
DVD-R
DVD-R
(Sólo discos en modo de video finalizados)
• Los siguientes discos se recomiendan para obtener una
buena calidad de grabación y han sido comprobados
como compatibles con este aparato. Sin embargo, según
sea la condición del medio el equipo podría no leer el
disco correctamente.
CD-DA (CD de audio)
CD de video
Verbatim
DVD+R 8x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
JVC
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
El comportamiento de cualquier otro disco no está
garantizado.
CD-RW
• Usted puede reproducir discos DVD+RW en la
mayoría de los reproductores de DVD sin finalizarlos.
Sin embargo, si usted ha añadido o eliminado
capítulos, u ocultado capítulos, debe ejecutar
“Compatibilizar edic.” antes de poder ver dichos
efectos en otros equipos. (Consulte la página 78.)
Para reproducir discos que no sean DVD+RW en
otros reproductores de DVD, usted necesitará
finalizarlos.
CD-R
Kodak Picture CD
Disco no Grabable
Archivos reproducibles
Soportes
• Un DVD-RW grabado en un modo distinto de +VR no
será grabable en este aparato a menos que usted borre
todo el contenido del disco. (Consulte la página 77.)
• Un DVD-R grabado en un modo distinto de +VR no será
grabable en este aparato.
MP3
CD-RW/-R
JPEG
es una marca registrada de
DVD Format/Logo Licensing Corporation.
Códigos de Región
El número presente en el interior
el globo se refiere a una región
del mundo.Este aparato puede
reproducir discos DVD que estén
rotulados para ALL las regiones o
para la región 1.
98 ES
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Conexión Básica
VIDEO IN
cable RCA de video
cable RCA de audio
VIDEO
OUT
AUDIO IN
L
L
R
R
AUDIO OUT
parte trasera de este aparato
IN
VIDEO VIDEO
IN
OUT
Esta conexión es sólo para
el procesamiento de cada
elemento de la señal de TV
Y
L
L
HDMI OUT
P
B/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
antena de
VHF / UHF
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
ANT. IN
cable coaxial
de RF
IN
o
empresa de
TV por cable
cable coaxial
de RF
OUT
ANTENNA
Conexión a un Televisor con un Puerto Compatible con HDMI™
• HDMI emite las señales de video / audio sin convertirlas en señales analógicas.
• No es necesaria una conexión de audio.
HDMI IN
cable HDMI
HDMI OUT
parte trasera de este aparato
IN
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
ANT. IN
IN
Esta conexión es sólo
para el procesamiento
de cada elemento de
la señal de TV
antena de
VHF / UHF
cable
coaxial
de RF
No incline el conector para introducirlo en la toma HDMI y compruebe que el tipo
de toma corresponde con el tipo de conector.
OUT
o
cable coaxial
de RF
ANTENNA
empresa de
TV por cable
Modo HDMI y señales efectivas de salida
Presione [HDMI] para seleccionar el modo de salida HDMI. Cada vez que se presiona [HDMI] el modo de salida varía como sigue.
Visualización
en pantalla
Señal de salida
de video
Progresivo de 480
Progresivo de 720
1080 entrelazado
Progresivo de 1080
480p
Presione [HDMI]
720p
Presione [HDMI]
1080i
Presione [HDMI]
1080p
Presione [HDMI]
• El modo HDMI que no esté admitido por el dispositivo de exhibición será pasado por alto.
• Aparecerá “---” cuando no disponga de información.
ES 99
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Grabación Básica
Configuración Inicial
Cuando usted encienda este aparato por primera vez
necesita seguir estos pasos.
Presione [OPEN/CLOSE A]
para abrir la bandeja de
discos e insertar su disco
con el rótulo aupntando
hacia arriba. Presione de
nuevo [OPEN/CLOSE A] para cerrar la
bandeja de discos.
1
Presione [STANDBY-ON y].
Encienda el televisor. Seleccione la entrada a
1
la cual está conectado el aparato.
Utilice [K / L] para seleccionar su
* Asegúrese de que el disco sea compatible con este
aparato.(Para obtener la lista de discos compatibles
consulte la página 98.)
idioma deseado, y luego presione
[OK] para establecerlo.
2
Para seleccionar un modo de
grabación presione [REC MODE].
Initial Setup
OSD Language
2
Calidad del video
y el sonido
Modo de
grabación
Tiempo de
grabación
English
Français
Español
Disco de 8 cm Disco de 12 cm
HQ (1Hr)
SP (2Hr)
SPP (2.5Hr)
LP (3Hr)
EP (4Hr)
SLP (6Hr) 108 min
18 min
36 min
45 min
54 min
72 min
60 min
120 min
150 min
180 min
240 min
360 min
Buena
Elija idioma de preparación.
Deficiente
Utilice [K / L] para seleccionar el tipo
de señal de emisión, y luego presione
[OK].
Presione [DTV/TV] para seleccionar TV
analógica o TV digital, y a
3
continuación, utilice [CHANNEL
/
]
3
4
Ajuste inicial
o [los botones numéricos] y [ • ] (para
canales de TV digital) para seleccionar
un canal que desea grabar.
Ajuste de Canal
Verificar que la antena esté
conectada a la toma "ANTENNA IN".
Antena
Cable (Analógico)
Cable (Analógico/Digital)
Presione [REC] para iniciar la
grabación.
Ajuste Auto escaneará los canales terrrestres.
Esto tarda unos momentos en finalizar.
Para configurar la grabación a un toque con
temporizador (OTR)...
Esta es una manera sencilla de configurar el tiempo de
grabación en bloques de 30 minutos.
Presione [REC] repetidamente hasta que aparezca en la
pantalla del televisor la longitud deseada de grabación (30
minutos a 6 horas).
El equipo comenzará a obtener los canales
disponibles en su región.
Utilice [{ / B] para seleccionar un
elemento a configurar, y utilice [K /
para seleccionar el contenido de su
preferencia, y luego presione [OK].
L]
Comenzará la grabación a un toque con temporizador.
4
I
0h30m
Ajuste inicial
0h30m
Ajste Manual de Reloj
(grabación normal)
1h00m
ENE / 01 / 2009 ( JUE )
12 : 00 AM
6h00m
5h30m
OK :
Ajuste hora.
Para cambiar la duración de la grabación durante la
grabación a un toque con temporizador:
RETURN : Salir de Ajuste inicial.
Presione [REC] repetidamente hasta que aparezca la duración
deseada.
Para cancelar la grabación a un toque con
temporizador dentro del tiempo especificado:
Presione [STOP C].
Para de tener la grabación presione
[STOP C].
5
100 ES
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Grabación con Temporizador
Usted puede programar el equipo para que grabe hasta 12
programas, con un mes de anticipación. También hay
disponibles grabaciones de programas diarias o semanales.
Antes de grabar, asegúrese de que
• Antes de establecer una programación del temporizador
configure el reloj.
Presione [TIMER].
1
2
Utilice [K / L] para seleccionar “Prog.
nuevo”, y luego presione [OK].
Programaci. con Reloj
• Inserte un disco grabable con suficiente espacio libre.
JUE ENE/01 11:00AM
Fcha
Empieza Termina
Prog. nuevo
CH
Configure una programación del
temporizador.
3
4
5
Presione [OK].
Presione [STANDBY-ON y] para
configurar una programación del
temporizador.
Se iluminará el indicador TIMER REC en el panel
delantero.
Configure la fecha.
Fcha
ENE/02
CH
Empieza
- - : - -
Modo
SP
Termina
- - : - -
DTV69. 1
SP
2h00m
Configure las horas de inicio y finalización.
Fcha
ENE/02
CH
Empieza
12 : 00AM
Modo
Termina
- - : - -
DTV69. 1
SP
SP
2h00m
Seleccione un modo deseado de entrada y el canal
a grabar.
Para obtener más detalles, consulte “How to select a
channel number for the timer recording” en la página
43 del manual del usuario.
ej.) modo digital
Fcha
ENE/02
CH
Empieza
12 : 00AM
Modo
Termina
1 : 00AM
DTV69. 1
SP
SP
1h00m
Seleccione un modo de grabación.
Fcha
ENE/02
CH
Empieza
12 : 00AM
Modo
Termina
1 : 00AM
DTV125. 1
SP
SP
1h00m
Reproducción
Presione
Abra la bandeja de
discos, y Inserte un
disco.
Cerrar la bandeja
de discos.
Comience a
reproducir.
Detenga la
1
[STANDBY-
2
3
4
5
reproducción.
ON
y].
ES 101
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI SERVICE CORPORATION
Customer Service
Tel: 1-800-605-8610
http://www.magnavox.com/support
2200 Spiegel Drive Groveport, OH 43125
Printed in China
E7S50UD
1VMN26797 ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|