User guide
S M A RT . V E RY S M A RT .
MCR220BK CD CLOCK RADIO
Read this manual first!
Return
If you have any problems, do not attempt
yourWarranty
to return this product to the store.
Registration Card
within 10 days
For fast help, call us first!
1-800-705-2000
Y
Download from Www.Somanuals.com. All Manuals Search And Download.
1
6
7
8
9
0
!
@
#
$
%
^
5
4
3
2
1
&
2
X
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12.
Use only with a cart, stand,
tripod, bracket, or table speci-
fied by the manufacturer, or
sold with the apparatus.When
a cart is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near
water.
6. Clean only with a dry cloth.
13. Unplug this apparatus during light-
ning storms or when unused for long
periods of time.
7. Do not block any of the ventilation
openings. Install in accordance
with the m anufacturer’s instruc-
tions.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
8. Do not install near any heat
sources such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the
safety purpose of
the polarized or
grounding-type plug. A
AC Polarized
Plug
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong.The wide blade or the third prong
are provided for your safety. If the provid-
ed plug does not fit into your outlet, con-
sult an electrician for replacement of the
obsolete outlet.
15.Battery usage
CAUTION
– To
prevent battery leakage which may result in
bodily injury or damage to the unit:
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
●
●
●
Remove batteries when the unit is not
used for a long time.
10. Protect the power cord from being
walked on or pinched particulary at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
EL 6475-E003: 01/6
11.O nly use attachm ents/accessories
specified by the manufacturer.
Class II equipm ent sym bol
This symbol indicates that the unit has a double
insulation system.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
PO RTABLE AUDIO
One Year Free Exchange
This product must be carried in for an exchange.
W HO IS COVERED?
EXCHANGING A PRO DUCT IN U.S.A.,
PUERTO RICO O R U.S.VIRGIN ISLANDS...
Contact your dealer to arrange an exchange. Or, ship the
product, insured and freight prepaid, and with proof of
purchase enclosed, to the address listed below.
Small Product Service Center
You must have proof of purchase to exchange the product.
A sales receipt or other document showing that you
purchased the product is considered proof of purchase.
Attach it to this owner’s manual and keep both nearby.
W HAT IS COVERED?
Service Company
907 Snapps Ferry Road, Plant 2, Building 6
Greeneville,TN 37743
Magnavox
Warranty coverage begins the day you buy your product.
For one year thereafter, a defective or inoperative product
will be replaced with a new, renewed or comparable
product at no charge to you.A replacement product is
covered only for the original warranty period.When the
warranty on the original product expires, the warranty on
the replacement product also expires.
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied
warranties, including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration to the
duration of this express warranty. But, because some states do
not allow limitations on how long an implied warranty may
last, this limitation may not apply to you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
EXCHANGING A PRO DUCT IN CANADA...
•
labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.
Please contact Magnavox at:
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
•
product repair and/or part replacement because of
misuse, accident, unauthorized repair or other cause
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or
fitness for a particular purpose. Magnavox is not liable under
any circumstances for any direct, indirect, special, incidental
or consequential damages, howsoever incurred, even if
notified of the possibility of such damages.)
not within the control of
Magnavox.
•
•
reception problems caused by signal conditions or
cable or antenna systems outside the unit.
a product that requires modification or adaptation to
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
REMEMBER...
Please record the model and serial numbers found on the
product below.Also, please fill out and mail your warranty
registration card promptly. It will be easier for us to notify
you if necessary.
•
•
incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of
incidental or consequential damages, so the above
exclusion may not apply to you.This includes, but is not
limited to, prerecorded material, whether copyrighted
or not copyrighted.)
MODEL # __________________________________
a product used for commercial or institutional
purposes.
SERIAL #
__________________________________
W HERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the
product is officially distributed by
Magnavox.
In countries where
does not distribute the product,
Magnavox
the local Magnavox service organization will attempt to provide
a replacement product (although there may be a delay if the
appropriate product is not readily available).
BEFO RE REQ UESTING EXCHANGE...
Please check your owner’s manual before requesting an
exchange.Adjustments of the controls discussed there may
save you a trip.
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Service Solutions Group, P.O. Box 2976, Longview, Texas 75606, (903) 242-4800
Download from Www.Somanuals.com. All Manuals Search And Download.
EL6095T002 / MAC5433 / 1-97
This product complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation.
L'appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement soumis aux deux
conditions suivantes:
1. Cet appareil ne doit pas provoquer d'interférences nuisibles, et
2. Cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de
provoquer un fonctionement peu satisfaisant.
El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento dependiente de dos
condiciones siguientes:
1. Este aparato no puede provocar interferencia dañina, y
2. Este aparato debe aceptar cualquier interferenciarecibida, incluyendo las interferencias que
puedenprovocar un funcionamiento insuficiente.
Canada
English:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the Radio Interference Regulations of the Canadian Department of Communications.
Français :
Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère
des Communications du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
CONTROLS/ INSTALLATION
% TUNING
CONTROLS (see figure 1)
- tunes to a radio station.
1 AL 1 ( ALARM/ OFF)
^
TIME/ ALARM
- toggle to set the times for the clock time, or alarm 1
or 2.
-
-
selects CD alarm;
to cancel or switch off CD alarm.
2 WAKE-UP TRACK
& Display
-
to program to your favorite CD track for wake-up
track alarm option.
- shows the clock / alarm times and status of the unit.
3 SLEEP
- adjusts timer options for CD / radio;
POWER SUPPLY
1. Check if the power voltage, shown on the AC-DC
adapter plug, corresponds to your local power
supply. If it does not, consult your dealer or service
center.
2. Connect the AC-DC adapter plug to the wall outlet.
3. To disconnect the set completely from the power
supply, withdraw the AC-DC adapter plug from the
wall outlet.
- switch on radio for timer mode.
4 REPEAT ALARM/ BRIGHTNESS CONTROL
-changes the brightness of the display window;
-switches off the alarm for a 9 minute period;
-switches off radio / CD timer (SLEEP).
5 Power cord
-connect AC-DC adapter plug to wall outlet.
6 Coil antenna
-antenna to improve FM reception.
The serial and production number are located on
the bottom of the set.
7 CD door
- lift here to open / close CD door
Standby power consumption (clock mode)..........2W
8 ALARM RESET (CD/ RADIO OFF)
- stops CD / radio playback;
- switches off radio / CD timer (SLEEP);
- stops the active buzzer, radio or CD alarms for 24
hours.
MEMORY BACKUP
The memory backup conveniently allows your clock and
alarm time settings to be stored for up to 3 minutes when
there is a power interruption e.g. AC power failure.
The complete CD clock radio and lighted display will be
switched off. As soon as the power supply returns, the
display will indicate the correct time.
9 AL 2 (
- selects radio
ALARM/ OFF)
/ buzzer
alarm mode;
- to cancel or switch off radio / buzzer alarm.
•
If power supply returns after 3 minutes you will need to
re-enter the clock and alarm time settings.
0 VOLUME 3 , 4
- adjusts the sound level.
! PLAY / PAUSE 2;
BASIC FEATURES
- starts / pauses CD playback.
Display brightness
@ DOWN, UP ∞ , §
- adjusts clock / alarm times
- skips CD tracks / searches for a particular passage.
1. Toggle REPEAT ALARM/ BRIGHTNESS CONTROL.
yThe brightness of the display toggles between:
low ➟ bright ➟ low
# Tuning indicator
- shows the radio frequency of your selected
waveband.
Volume
Press
4
or
3
to adjust the
volume level. The volume
level uo: is indicated as a
number from 0-32.
$ RADIO ON (FM/ AM)
- switches on the radio;
- selects the radio waveband.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING TIMES
CD
SETTING THE CLOCK AND ALARM TIMES
CD PLAYBACK
The time is displayed using the 12 hour clock (PM
indicator lights up = PM, off = AM).
1. Press and hold down
TIME/ ALARM until the
clock or alarm time display
flashes, then release
1. Insert a CD with the printed side facing up, and
close the door.
2. Press PLAY/ PAUSE 2; to start playback.
yDisplay shows:
'Cd: --' and the total
number of tracks, then
your current track
number, before
returning to clock time.
Other possible CD indications before
returning to clock time:
TIME/ ALARM.
•
Press TIME/ ALARM repeatedly to toggle
between the time or alarm displays
2. Press and hold down ∞ / § to fast adjust both
the hours and minutes settings.
3. Release ∞ / § when you
have reached the desired
setting.
ydooris shown if the CD door is not closed.
ynoCdis shown if no CD has been inserted /
inserted incorrectly.
ynFCdis shown if the CD-R(W) is non-
finalized
yIf you need to adjust
the time slowly, minute by minute, press and
release ∞ / § repeatedly.
yAfter several seconds, the time setting is
confirmed when the display stops flashing.
4. Repeat steps 1-3 for each of the clock or alarm
(AL1, AL2) settings.
yErrindicates a general error in operation of
the set.
3. Adjust the sound with
4
or
3.
4. To interrupt, press 2;
yCD icon
flashes.
Alarm time display
5. Press 2; again to resume playback.
If you have set both alarms, the standby alarm time
display will show the earlier of the two alarm times
as priority.
6. Press ALARM RESET to stop playback.
Note: If CD playback is paused for more than 15
minutes and no controls are pressed, the set
automatically goes to standby mode.
E.g. if AL1 = 6:00 and AL2 = 5:45, then the standby
alarm display will show the AL2 time 5:45.
Selecting a different track during playback
The track number appears briefly in the display when
you press ∞ or § to skip tracks.
•
•
Press § once or more to skip to the next track(s).
Press once and playback will return to the
beginning of the current track.
Press more than once to skip to previous tracks.
∞
•
∞
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/ RADIO
SETTING ALARM OPTIONS
Finding a passage within a track
1. During playback, press and hold down
yThe CD is played at high speed and low
Radio Alarm:
∞
or
§
If you have selected the radio alarm, make sure
you have tuned properly to a station.
volume; the display will show 'Cd:' and your
current track number.
2. Release
∞
or
§
when you recognize the passage
2. Read the following section if you want to select
you want.
the WAKE-UP TRACK alarm option.
yNormal CD playback and standby clock time
resumes.
Selecting CD WAKE-UP Alarm Mode
You can program and select a CD track number
between 1-99, when the set is in the standby or radio
playback mode.
However, if the track number programmed does not
exist on your CD, the CD will start playback from the
first track during the alarm call.
RADIO
1. Press RADIO ON (FM/ AM) to switch on the
radio.
yDisplay shows 'tu' before returning to clock
time.
2. Press RADIO ON (FM/ AM) again if you wish to
change waveband.
3. Adjust the sound using
4. Adjust the TUNING wheel to tune to a radio
station.
To improve reception:
FM: Extend coil antenna at the back of the unit fully
for optimum reception.
1. Set the alarm time for AL1.
2. Insert a CD into the CD compartment.
3. Press AL 1 to select CD alarm mode.
4. Press WAKE-UP TRACK to activate favorite track
programming.
4
or
3
5. Press
∞
or
§
until the desired track number is
shown.
6. Press WAKE-UP TRACK to confirm the selected
track number.
yThe display returns to standby clock time.
7. If you want to review your programmed track
number, press WAKE-UP TRACK
AM: Uses a built-in antenna. Direct the antenna by
adjusting the position of your set.
5. Press ALARM RESET to switch off.
SETTING THE ALARM OPTIONS
Note:
GENERAL
•
The buzzer alarm option will automatically replace
the CD alarm if you have:
Two different alarm times, AL 1 and AL 2 can be set
in the CD, radio or buzzer modes.
– inserted a CD incorrectly;
– inserted a damaged CD;
– forgotten to insert any CD;
– not closed the CD door properly.
Selecting the Alarm Mode Options
When selected, the selected alarm mode is shown in
the display, and the respective AL 1 or 2 button
lights up.
1. Select your choice of alarm mode.
Either press briefly:
•
AL1 once for CD alarm
.
This enables CD
playback from the first track as your alarm call.
•
AL2 once or more for radio
/
buzzer
alarm
AL TIME 2
Download from Www.Somanuals.com. All Manuals Search And Download.
C
SWITCHING OFF ALARM
Gentle Wake Volume
SLEEP
CANCELING THE ALARM COMPLETELY
A sure way of getting up in the mornings, the gentle
To cancel the set alarm time before it goes off, or
wake volume for the alarm begins from a fixed gentle during the alarm call:
volume (10) and gradually increases to a maximum
higher setting of ( 25.)
•
Press AL1 or AL 2 once or more until the selected
alarm indicator disappears from the display.
yYou will hear a beep tone to confirm the alarm
has been cancelled.
•
•
•
The default low volume is Lo: 10, and the
maximum volume is HI: 25.
During the alarm call, if you press
volume stops increasing immediately.
The gentle wake volume settings do not affect
normal CD and radio playback volume level, unless About Sleep
you have pressed or during the alarm call.
4
or
3, the
SLEEP
4
3
The CD clock radio has a built-in sleep timer which
enables the set to be automatically switched off
during radio or CD playback after a set period of time.
There are 3 sleep times: 60, 30 and 15 minutes.
The sleep function does not change the operation of
your alarm settings.
SWITCHING OFF THE ALARM
There are three ways to switch off the alarm. Unless
you cancel the alarm completely, the 24 HOUR
ALARM RESET will be automatically selected after
59 minutes, from the time your alarm time first goes
off.
Setting SLEEP
1. Press 2; (CD) or RADIO ON (radio) to switch on
the desired mode.
24 HOUR ALARM RESET
•
You can also press SLEEP if you want the timer in
radio mode.
If you want the alarm mode to be stopped
immediately but also wish to retain the same alarm
setting for the following day:
2. Select your timer option by
pressing SLEEP once or
more until the desired
option is shown.
•
Press ALARM RESET.
yYou will hear a beep tone to confirm the 24
hour alarm is reset.
•
Display shows SL:and the timer options:
60➟ 30➟ 15minutes ➟ 60➟ 30...
REPEAT ALARM
3. To cancel the timer function you can either:
This will repeat your alarm call at 9-minute intervals.
•
•
•
Press ALARM RESET.
•
During the alarm call, press REPEAT ALARM/
BRIGHTNESS CONTROL.
Press REPEAT ALARM/ BRIGHTNESS CONTROL.
•
Repeat if desired up to an hour.
Press SLEEP once or more until the sleep function
is no longer shown.
Note:
•
•
•
The selected alarm mode
indicators flashes throughout the repeat alarm
duration.
If you are using the CD alarm mode, CD playback
resumes at the point where the repeat alarm
interrupted.
During the CD alarm, CD playback continues for up
to an hour unless you cancel / reset the alarm.
or
,
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
TROUBLESHOOTING
MAINTENANCE (see figure 2)
TROUBLESHOOTING
General
If a fault occurs, first check the points listed below
before taking the set for repair.
If you are unable to remedy a problem by following
these hints, consult your dealer or service center.
•
•
•
If you do not intend to use the CD clock radio for a
long time, withdraw the AC-DC adapter plug from
the wall outlet.
Do not expose the set or CDs to humidity, rain,
sand or excessive heat caused by heating
equipment or direct sunlight.
To clean the set, use a soft dry cloth. Do not use
any cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the
housing.
WARNING:
Do not open the set as there is a risk of electric shock.
Under no circumstances should you try to repair the
set yourself, as this will invalidate the warranty.
No sound
– Volume not adjusted
CD player and CD handling
•
Adjust the VOLUME
•
•
The lens of the CD player should never be touched!
Sudden changes in the surrounding temperature
can cause condensation to form and the lens of
your CD player to cloud over. Playing a CD is then
not possible. Do not attempt to clean the lens but
leave the set in a warm environment until the
moisture evaporates.
No operation buttons function
– Electrostatic discharge
•
Disconnect the set from the power supply and
reconnect the set after 5 minutes.
CD playback does not work
•
•
Always shut the CD door to keep the CD
compartment dust-free. To clean, dust the
compartment with a soft dry cloth.
To clean the CD, wipe in a straight line from the
center towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
– CD badly scratched or dirty
•
Replace/ clean CD
– Laser lens steamed up
Wait until lens has adjusted to room temperature
– Laser lens dirty
Clean lens by playing a CD lens cleaning disc
– CD-R(W) is non-finalized
Use a finalized CD-R(W)
•
•
•
Never write on a CD or attach any stickers to it.
•
Occasional crackling sound during FM
broadcast
– Weak signal
•
Extend coil antenna fully
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TROUBLESHOOTING
CAUTION
Continuous crackling/ hiss disturbance during
AM broadcast
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
– Electrical interference from TVs, computers,
fluorescent lamps, etc.
•
Move set away from other electrical equipment
The alarm does not function
– Alarm time not set
•
See section on SETTING THE CLOCK AND ALARM
TIMES
Environmental information
– Alarm mode not selected
See section on SETTING THE ALARM OPTIONS
•
nnecessary packing material has been
omitted to make the packing easy to separate
into 2 categones: cardboard and paper pulp.
Your unit consists of materials which can be
recycled if disassembled by a specialized
company. Please observe local regulations on
the disposal of packing materials and old
equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Magnavox at the Internet
MCR220BK
CLASS 1
LASER PRODUCT
3140 115 2903.4
Printed in China
W
Download from Www.Somanuals.com. All Manuals Search And Download.
|