Owner’s Manual
NB500MG9
Blu-ray Disc Player
Read your Owner’s Manual first for
quick tips that make using your
Magnavox product more enjoyable.
If you have read assistance,
you may access our online help at
or call
1-800-605-8610
while with your product
(and Model / Serial number)
© 2008 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause
harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority
to operate this apparatus if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful
interference to radio or television reception, which can be determined by turning the apparatus off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the
grounding system of the building as close to the point of cable entry as practical.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
ABOUT COPYRIGHT
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product
incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Supplied Accessories
Maintenance
Servicing
remote control
with batteries
(AAx2) (NB812UD)
RCA audio / video AC cord
cables
• Please refer to relevant topics on “TROUBLESHOOTING” on
(WAV0162LW001)
page 43 before returning the product.
(WPZ0102TM015 /
WPZ0102LTE01)
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call our
toll free customer support line found on the cover of this
manual to locate an authorized service center.
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit. Such
chemicals may discolor the surface or damage the unit.
owner’s manual (EN/ES/FR) quick start guide (EN/ES/FR)
(1VMN25073 / 1VMN25075 (1VMN25074 / 1VMN25076)
/ 1VMN25293)
Cleaning discs
Owner’s Manual
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not wipe
in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from an AC outlet. Grasp it by the plug.
Cleaning the disc lens
• If this unit still does not perform properly although you
refer to the relevant sections and to “TROUBLESHOOTING”
in this user manual, the laser optical pickup unit may be
dirty. Consult your dealer or an authorized service center
for inspection and cleaning of the laser optical pickup unit.
• Do not put your fingers or objects into the unit.
Installation Location
For safety and optimum performance of this unit:
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not
used.
• Note that discs with special shapes (heart-shaped discs,
octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to playback such discs, as they may
damage the unit.
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper heat
dissipation. Do not block the ventilation holes on the
back and sides of the unit. Avoid locations subject to
strong vibration or strong magnetic fields.
IR signal check
• Be sure to remove the disc and unplug the AC power
cord from the outlet before carrying the unit.
• If the remote control is not working properly, you can
use an AM radio or digital camera (including a cellular
phone with built-in camera) to see if it is sending out an
infrared signal.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it
is moved from a cold place to a warm place or after
heating a cold room or under conditions of high
humidity. Do not use this unit at least for 2 hours until its
inside gets dry.
• With an AM radio:
Tune the AM radio station to a non-
broadcasting frequency. Point the
remote control towards it, push any
button and listen. If the sound from
the radio flutters, it is receiving the
remote control’s infrared signal.
Note about Recycling
• This unit’s packaging materials are recyclable
and can be reused. Please dispose of any
materials in accordance with your local
recycling regulations.
• With a digital camera
(including built-in cell
phone cameras):
Point a digital camera towards the remote
control. Push any button on the remote
control and look through the digital
camera. If the infrared light appears
through the camera, the remote control is
working.
• Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Trademark Information
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and / or other countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Product that have earned ENERGY STAR® are designed to
protect the environment through superior energy
efficiency.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued & pending. DTS
and DTS Digital Surround are registered trademarks and
the DTS logos and Symbol are trademarks of DTS, Inc.
© 1996-2007 DTS, Inc. All Rights Reserved.
is trademark of Eastman Kodak Company.
“Blu-ray Disc“ and
are trademarks.
is a trademark of DVD Format/Logo Licensing
Corporation.
© 2008 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent
of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly
prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their
respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any
license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this
manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the
law.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
Function Setup
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FUNCTION SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using the Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . .7
Others
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Connections
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back Cover
CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connection to the TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connection to an Audio System . . . . . . . . . . . . . . . . . . . 15
Connecting the AC Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playback
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 17
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operations Using Title Menu, Disc Menu,
and Pop-up Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Playing Back an audio CD and a Disc with
JPEG Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Reading the SD Memory Card . . . . . . . . . . . . . . . . . . . . . 23
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Fast Forward / Fast Reverse. . . . . . . . . . . . . . . . . . . . . . . . 25
Slow Forward Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
A-B Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
PIP (Picture in Picture) Setting . . . . . . . . . . . . . . . . . . . . . 26
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Camera Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SPECIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 29
Setting the BD Audio Mode . . . . . . . . . . . . . . . . . . . . . . . 30
Adjusting the Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
HDMI1080p / fps output (BD only)
Features
This unit is equipped with the feature which can provide
the smooth movement in the playback of film originated
material with the frame rate of 24 frames per second with
progressive. (Available only when the TV is connected by
an HDMI cable and compatible with 1080p24 frame
input.)
Full high-definition video playback
Watch movies in the highest picture quality available for
your HDTV. This unit offers full high-definition video
playback up to 1080p resolution for an amazing viewing
experience. A highly detailed picture and increased
sharpness delivers a more true-to-life picture.
Refer to “HDMI Video Resolution” in “FUNCTION SETUP”
on page 34.
Upconvert DVD for enhanced picture quality
Playing back the contents in SD Memory Card
You can play back JPEG stored in an SD Memory Card.
You can store picture-in-picture commentary, subtitles or
other extras for BD-ROM Profile 1 ver.1.1 files in an SD
Memory Card and play back with the BD-video.
Your current DVD will look even better than before
thanks to video upconversion. Upconversion will increase
the resolution of standard definition DVD to high
definition up to 1080p over an HDMI connection. The
picture will be less jagged and more realistic for a near
high-definition experience.
Symbols Used in this Manual
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD ensures that
you can continue to enjoy your current audio-video
collection. Additionally, you can view JPEG.
To specify for which media type each function is, we put
the following symbols at the beginning of each item to
operate.
Symbol Description
Listen to the rich multi-channel surround sound
Multi-channel surround sound, which realizes real-to-life
sound and makes you feel that you are really there.
Description refers to BD-video and
BD-RE (ver. 2.1) / BD-R recorded in BDMV
format
Description refers to DVD-video
Easy and simple connection to your HDTV via HDMI
Connect this unit to your HDTV with one single HDMI
(high definition multimedia interface) cable. It is
recommended to use High Speed HDMI Cable for better
compatibility. The high definition video output signal will
be transferred to your HDTV without conversion to
analogue signals, so you will get an excellent picture and
sound quality, completely free from noise.
Description refers to audio CD / DTS-CD
Description refers to DVD, CD-RW/-R and
SD Memory Card with JPEG files
If you do not find any of the symbols listed above under
the function heading, the operation is applicable to all
media.
Thanks to other multiple outputs, you can also easily
connect to your home theater system or amplifier.
PIP
Some BD-video have the PIP (picture-in-picture) function
which enables you to display the secondary video in the
primary video. You can call up the secondary video by
pressing [PIP] whenever the scene contains the
secondary video.
Pop-up menu
Some BD-video have pop-up menu which is a navigation
menu that can be called up and be operated on the TV
screen without interrupting the playback. You can call up
the pop-up menu by pressing [POP MENU / MENU].
Contents in the pop-up menu vary depending on the
disc.
HDMI Deep Color
Deep Color reduces the posterization effect of the
playback image. Refer to “HDMI Deep Color” in
“FUNCTION SETUP” on page 34.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel
1
2*
3
4
5 6 7* 8 9 10
11
*
The unit can also be turned on by pressing these buttons.
1. Disc tray
• Place a disc when opening the disc tray.
7. B PLAY button*
• Press to start or resume playback.
2. A OPEN/CLOSE button*
8. SD card slot
• Press to open or close the disc tray.
• Insert an SD Memory Card, and play back the
contents in it.
3. Disc indicator
• This indicator lights up in blue when a disc is in this
unit.
9. Infrared sensor window
• Receive signals from your remote control so that
you can control the unit from a distance.
4. Display
• Refer to “Front Panel Display” on page 11.
10. STANDBY-ON indicator
• This indicator lights up in red when the power is on
and turns off when the power is off.
5. C STOP button
• Press to stop playback.
11.ySTANDBY-ON button
6. k PAUSE button
• Press to turn the unit on or off.
• Press to pause playback.
Rear Panel
3
4
5
1
2
6
1. COMPONENT VIDEO OUT jacks
5. AC IN Terminal
• Use to connect a TV with component video inputs
with an RCA component video cable.
• Use to connect the AC outlet with the AC cord.
6. VIDEO OUT jack
2. HDMI OUT jack
• Use to connect a TV, an AV receiver or other device
with an RCA video cable.
• Use to connect a TV with an HDMI compatible port
with an HDMI cable.
3. AUDIO OUT jacks
• Use to connect a TV, an AV receiver / amplifier or
other device with an RCA audio cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
4. DIGITAL OUT (COAXIAL) jack
• Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio coaxial input jack with a digital audio coaxial
cable.
• This unit does not have the RF modulator.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Remote Control
11.PLAY B button*
• Press to start playback or resume playback.
12.SKIP H button
14
1
OPEN/
CLOSE
STANDBY-ON DISPLAY
HDMI
• During playback, press once to return to the
beginning of the current title, chapter or track.
• During the JPEG playback, press to return to the
previous file.
• During playback, press twice to return to the
previous title, chapter or track.
15*
2
PIP
ANGLE
REPEAT
A-B
16
17
18
3
13.PAUSE F button
SEARCH
CLEAR
• Press to pause playback.
19
20
4
5
• When playback is in pause mode, press repeatedly
to forward the playback step by step.
POP MENU/
MENU
14.HDMI button
TOP MENU
• Press to set the HDMI output mode.
6
7
8
21
15.OPEN/CLOSE A button*
OK
• Press to open or close the disc tray.
22
23
SETUP
RETURN
AUDIO
16.PIP button
• Press to switch picture-in-picture feature on or off
(only applicable to BD-video which supports the
PIP function).
SUBTITLE
9
24
25
27
28
17.ANGLE button
10
• Press to access various camera angles on the disc.
• Press to rotate the JPEG files.
11*
26
12
13
18.REPEAT button
MODE
• Press to toggle between various repeat modes.
19.A-B button
• Press to play back a defined section between point
A and B repeatedly.
20.CLEAR button
• Press to clear the information once entered, to
clear the marker settings, or to cancel the
programming for audio CD, etc.
21.POP MENU/MENU button
• Press to display the pop-up menu / disc menu.
22.OK button
• Press to confirm or select menu items.
*
The unit can also be turned on by pressing these
buttons.
23.RETURN button
• Press to return to the previously displayed menu
screen.
1. DISPLAY button
• Press to display the on-screen display menu.
24.AUDIO button
• Press to display the audio menu.
2. STANDBY-ON y button
• Press to turn the unit on or off.
25.FWD D button
• During playback, press to fast forward the
playback.
3. Number buttons
• Press to enter the title, chapter, track or file
number.
• Press to enter values in the input field.
• In pause mode, press to slow forward the playback.
26.STOP C button
• Press to stop playback.
4. SEARCH button
• Press to display the search menu.
27.SKIP G button
• During playback, press to skip to the next title,
chapter, track or file.
5. Red / Green / Blue / Yellow button
• Press to select items on some BD menus.
28.MODE button
6. TOP MENU button
• During playback, press to display the picture
adjustment menu.
• Press to display the top menu.
7. Cursor K / L / { / B buttons
• During the JPEG playback, press to display menus
for changing the visual effect for switching the
image or changing the size of the image.
• In stop mode with BD inserted, press to display a
menu for setting the BD audio mode.
• In stop mode with audio CD, or JPEG files inserted,
press to display menus for program and random
playback.
• Press to select items or settings.
8. SETUP button
• Press to display the setup menu.
9. SUBTITLE button
• Press to display the subtitle menu.
10.REV E button
• During playback, press to fast reverse the playback.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Installing the Batteries in the Remote Control
Using a Remote Control
Install the batteries (AAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
1 Open the cover.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
2 Insert batteries.
- Line of sight: approx. 23 feet (7m)
-
Either side of the center: approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
30˚
30˚
Make sure to match + and - on the batteries to the
marks indicated in the battery compartment.
16 feet
(5m)
23 feet
(7m)
16 feet
(5m)
3 Close the cover.
Note
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction’s rules that apply in your country or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel Display
1
2
• Brightness of the display can be adjusted. Refer to “Panel Display” in “FUNCTION SETUP” on page 41.
1. Displays playback status icon. Refer to the table below.
2. Displays various kinds of information such as title number, elapsed time, repeat mode, etc.
Playback status icon
Mode
Disc
SD Memory Card
Playback is in progress
Stop mode
Pause mode
Fast forward mode
Fast reverse mode
Slow forward mode
Appears while repeat function is set
Example of Display Message
Title is being played back.
Indicating the current title number and the elapsed time.
Current chapter is in chapter repeat mode.
Loading a disc.
Dolby Digital audio is being played back.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to the TV
• Make one of the following connections, depending on the capabilities of your existing device.
AUDIO CONNECTION
AUDIO / VIDEO
CONNECTION
VIDEO CONNECTION
1
*
1
1, 2
*
*
Method 1
Method 2
Method 3
Method 4
TV
standard audio standard picture better picture
best picture
best audio / picture
AUDIO IN
COMPONENT
VIDEO IN
DVI IN
VIDEO
IN
R
L
HDMI IN
Y
(Green)
PB/CB
PR/CR
(Blue)
(Red)
RCA
video
cable
HDMI
cable
HDMI-DVI
cable
RCA
component
video cable
RCA
audio cable
and
or
or
or
(Green)
(Red)
this unit
VIDEO
OUT
COMPONENT
VIDEO OUT
Y
PR/CR
(Blue)
PB/CB
AUDIO OUT
VIDEO OUT
COMPONENT
VIDEO OUT
HDMI OUT
1
2
*
*
This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures
than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer
to “HDMI Video Resolution” or “Component Output” setting on page 34 to set the video resolution.
Analog audio connection is not required for this connection.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be
distorted due to the copy-protection system.
• If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting,
press and hold [ B PLAY] on the front panel for more than 5 seconds. “HDMI Video Resolution” and “Component
Output” setting will be reset to the default automatically.
• A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) jack allows
digital transfer of both digital video signals and multi-channel audio signals.
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
HDMI Output Mode and Actual Output Signals
Press [HDMI] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution
changes as follows every time [HDMI] is pressed.
Front Panel
Display
HDMI Video Resolution
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
1080 Interlaced
Press [HDMI]
1080 Progressive
Press [HDMI]
1080 Progressive 2424 frame
Press [HDMI]
Copyright protection system
To play back the digital video images of a BD / DVD via an HDMI connection, it is necessary that both the unit and
the TV (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology that comprises data encryption and authentication of the
connected AV device. This unit supports HDCP. Please read the operating instructions of your TV (or AV amplifier)
for more information.
Note
• When using HDCP-incompatible TV, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI jack, this unit cannot
be controlled by another device via the HDMI jack.
• The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length)
maybe limited by the device that is connected.
• Among the devices that support HDMI, some do not support audio output (e.g, projectors). In connections with
device such as this unit, audio signals are not output from HDMI OUT jack.
• You cannot select the video resolutions which are not supported by the connected TV, except when this unit’s
HDMI OUT jack is connected to a DVI compatible display devices with an HDMI-DVI cable.
• For HDMI OUT jack to DVI connection, after you select an HDMI output mode, corresponding HDMI video
resolution will be output. The HDMI video resolution you selected will be output even if the connected TV is not
compatible with the HDMI video resolution. If there is no image displayed on the connected TV, please select
another HDMI video resolution.
• Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.
• You can also change the HDMI output mode from “HDMI Video Resolution” setting in “Video” menu. In this menu,
you can confirm what HDMI video resolutions are supported by connected TV. Refer to page 34.
• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High
Speed HDMI Cable is recommended) and select “1080p24” if the connected TV is compatible with 1080p24 frame
input.
• Even if you set “HDMI Video Resolution” setting to “1080p24”, when the contents of the disc is not compatible for
1080p24 frame, 1080p60 frame will be output.
• There is no output from VIDEO OUT and COMPONENT VIDEO OUT jacks when you play back a BD that recorded
24-frame film material by HDMI output mode of 1080p24.
• COMPONENT VIDEO OUT jacks may not output any signals when you set “HDMI Deep Color” setting to “Auto”.
• It is recommended to use High Speed HDMI Cable (also known as HDMI category 2 cable) for better compatibility.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
HDMI Audio Setting
When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the
device to be connected.
Device to be connected
“HDMI Audio Out” setting
Output HDMI audio signal
Device compatible with Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS
or DTS-HD decoding
HDMI Multi (Normal)
Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS, or DTS-HD bitstream are
output from HDMI OUT jack. Make the
speaker settings on the connected AV
amplifier, etc.
Device compatible with 3 or more
channels of audio inputs (not Dolby
Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD compatible)
HDMI Multi (LPCM)
Audio Mute
Multi-channel audio signals are output
from HDMI OUT jack. Make the speaker
settings with the speaker setting items
appear after you select “HDMI
Multi(LPCM)”. Refer to page 36.
HDMI connection to a TV, and digital
audio connection (coaxial) to an AV
amplifier.
HDMI audio will be muted, and Dolby
Digital / DTS bitstream or LPCM will be
output from DIGITAL OUT jack
depending on “Digital Out” setting.
Refer to page 37.
■ Audio signals output from HDMI OUT jack
“HDMI Audio Out” setting
Disc type
Audio recording format
HDMI Multi(Normal)
HDMI Multi(LPCM)
Multi LPCM
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
Dolby Digital*1
Dolby Digital Plus*1
Dolby TrueHD*1
DTS*1
Multi LPCM*2
Multi LPCM*3
Multi LPCM
Multi LPCM*4
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
2ch LPCM
BD-video
DTS-HD
DTS-HD*1
LPCM
Multi LPCM
Dolby Digital
DTS
Dolby Digital
DTS
DVD-video
LPCM
Multi LPCM
2ch LPCM
DTS
audio CD
DTS-CD
Multi LPCM
1
2
3
4
*
*
*
*
If “BD Audio Mode” setting is set to “Mix Audio Output”, audio will be output as multi LPCM. Refer to page 36.
Outputs audio signals decoded from independent substream.
Outputs audio signals decoded from Dolby Digital stream.
Outputs audio signals decoded from DTS core stream.
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel
down-mixed LPCM depending on the capability of the connected device even if you select “HDMI Multi(Normal)” in
“HDMI Audio Out” setting. Refer to page 36.
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
2-Channel Analog Audio Connection
stereo system
AUDIO IN
audio
R
L
analog audio input jacks
RCA audio cable
AUDIO
OUT
L
this unit
R
AUDIO OUT
Digital Audio Connection
AV receiver / amplifier
audio
DIGITAL AUDIO INPUT
COAXIAL
digital audio coaxial
input jack
digital audio coaxial cable
this unit
DIGITAL OUT (COAXIAL)
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
■ Audio signals output from DIGITAL OUT jack (COAXIAL)
The audio signals currently output from HDMI OUT jack will be output from DIGITAL OUT jack as well, except that
Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output
instead of DTS-HD.
When “Audio Mute” is selected in “HDMI Audio Out” setting, audio signals output from HDMI OUT jack will be muted
and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.
To set “Digital Out” setting, select “Audio Mute” in “HDMI Audio Out” setting.
“Digital Out” setting
Disc type
Audio recording format
Dolby Digital
Bitstream
Dolby Digital
LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch LPCM
Dolby Digital Plus
Dolby TrueHD
DTS
Dolby Digital
Dolby Digital
DTS*
BD-video
DTS-HD
DTS*
LPCM
2ch Downmix LPCM*
Dolby Digital
DTS
Dolby Digital
DVD-video DTS
LPCM
2ch Downmix LPCM
2ch LPCM
DTS
audio CD
DTS-CD
2ch Downmix LPCM
* For BD titles with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions
listed below are met:
• When “BD Audio Mode” setting is set to “Mix Audio Output”.
• When “HDMI Audio Out” setting is set to “Audio Mute”.
• When “Digital Out” setting is set to “Bitstream”.
If BD titles do not have secondary or interactive audio, the audio will be output as shown in the table.
• This table applies only when HDMI cable is not connected or “Audio Mute” is selected in “HDMI Audio Out” setting.
Note
• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “BD Audio
Mode” setting to “Mix Audio Output” and set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.
Connecting the AC Cord
After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC
outlet.
Insert the plugs securely. Incomplete connections will result in the generation of noise.
this unit
AC outlet
AC 120V, 60 Hz
AC cord
Supplied cables used in this connection are as follows:
• AC cord x 1
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Before you start playing back a disc, read the following information.
Playable Discs and Files
This unit is compatible to play back the following discs /
files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos. Other disc types are not guaranteed to
play back.
Note for SD Memory Cards
• Do not remove the SD Memory Card or turn off the
unit while the contents of the card is in playback. It
may result in malfunction or loss of the card’s data.
• Please keep the SD Memory Cards in their cases
when you are not using them.
• Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers
or any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit supports SD Memory Card with FAT12/
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
• This unit may not read the SD Memory Cards
formatted on computer. If that is the case, please
reformat the SD Memory Cards in this unit and try
again.
• This unit does not supports miniSDHC and
microSDHC Memory Card.
• For miniSD Card and microSD Card, the adapter is
necessary.
Playable discs
Blu-ray Disc
- BD-video (single / double
layer)
- BD-RE ver.2.1 (single /
double layer)
(Recorded in BDMV format)
- BD-R (single / double layer)
(Recorded in BDMV format)
(Unclosed discs may not be
played back.)
Logos
DVD-video
miniSD Card
microSD Card
adapter
adapter
miniSD Card
microSD Card
DVD+RW (single layer)
• Portions of this product are protected under
copyright law and are provided under license by
ARIS / SOLANA / 4C.
DVD+R
(single / double layer)
CD-DA (audio CD)
CD-RW
Unplayable Discs and Files
The following discs will not be played back in this unit.
• CD-ROM
• CD-I (compact disc-interactive)
• VSD (video single disc)
• BD-RE (ver.1 / ver.3)
• video CD
• DVD-RAM
• DVD-audio
• HD DVD
CD-R
• unfinalized disc
• BD-RE/-R recorded in BDAV format
• DVD / CD / SD Memory Card contains MP3,
Windows Media™ Audio files and DivX®
• SVCD
Kodak Picture CD
DTS-CD
• DVD-RW/-R recorded in VR mode or non compatible
recording format.
• super audio CD - Only the sound on the CD layer can
be heard. The sound on the high-density super audio
CD layer cannot be heard.
Playable files
Media
DVD, CD-RW/-R,
SD Memory Card
(including SDHC), miniSD
Card, microSD Card
• Playability of dual discs are not guaranteed.
JPEG
Readable cards
Playable files / data
SD Memory Card (8MB - 2GB)
JPEG, picture-in-picture
commentary, subtitles or
other extras for BD-ROM
Profile 1 ver.1.1
SDHC Memory Card (4GB)
miniSD Card (8MB - 2GB)
microSD Card (8MB - 2GB)
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
On-Screen Display
Color Systems
You can check information about the current disc by
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
This unit employs NTSC color system, so the disc you play
back must be recorded in the NTSC system. You cannot
play back the disc recorded in other color systems.
pressing [DISPLAY].
To call the on-screen display menu, press [DISPLAY]
during playback. Every time you press [DISPLAY], the
information changes. Depending on the media, available
information varies.
off A Title / Chapter information
A Title information (elapsed time)
A Title information (remaining time)
A HDMI information A off
Region Codes
BD-video
This unit has been designed to play back
BD-video with region A and DVD-video with
region “1” or “ALL“. You cannot play back
BD-video or DVD-video that are labeled for
other regions. Look for the symbols on the
right on your BD-video or DVD-video.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region of
the world. A BD-video or DVD-video labeled
for a specific region can only be played back
in the unit with the same region code.
DVD-video
off A Chapter information (elapsed time)
A Chapter information (remaining time)
A Title information (elapsed time)
A Title information (remaining time)
A Bit rate information A HDMI information A off
off A Track information (elapsed time)
A Track information (remaining time)
A Disc information* (elapsed time)
A Disc information* (remaining time)
A HDMI information A off
Structure of Disc / SD Memory Card Contents
The contents of BD-video / DVD-video are generally
divided into titles. Titles may be further subdivided into
chapters.
(*not available during program / random playback)
BD-video / DVD-video
title 1
title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
off A File name information
A File information A HDMI information A off
• For audio CD and JPEG, during program or random
playback, the indication will be displayed after the
track / file information.
audio CD are divided into tracks.
audio CD
track 1
track 2
track 3
track 4
track 5
Data discs or SD Memory Cards contain JPEG are divided
into folders, and the folders are subdivided into files.
JPEG
folder (group) 1
groupfolder1
folder (group) 2
group(oler2
file (track) 1 file (track) 2 file (track) 3 file (track) 4 file (track) 5
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
■ Chapter information
■ Track / File information
1
2
3
4
1
2
3
4
F
B
3 / 5
0 : 01 : 02
1 / 14
0 : 00: 51
SD
T
Current track (file) number / Total number of track
(file)
1
<Title / Chapter information for BD>
Elapsed time / Remaining time of the current track
Indication of SD Memory Card playback
Current repeat setting
2
3
4
5
6
1
1 / 10
A
B
B
(Only when repeat setting is active)
(T: Track / File repeat, G: Group repeat,
A: All repeat, AB: A-B repeat)
Current chapter number / Total number of
chapters
Elapsed time / Remaining time of the current
chapter
Indicates that the multi camera angle images are
available on the scene
Current playback status
Current title number
1
2
3
■ Disc information
1
2
B
1 / 14
0 : 00: 51
T
4
5
6
Current track number / Total number of tracks
Elapsed time / Remaining time of the current disc
1
2
Current repeat setting (Only when repeat setting
is active)
(C: Chapter repeat, T: Title repeat, AB : A-B repeat)
■ File name information
1
■ Title information
File_name_001
1
2
Media icon and file name
1
B
3 / 5
0 : 01 : 02
: JPEG file
Current title number / Total number of titles
Elapsed time / Remaining time of the current title
1
2
■ HDMI information
1
2
■ Bit rate information
Video Info
Audio Info
:
:
YCbCr/
PCM
1080i
1
2
Max Channel :
2 ch
L1
B
3
4
Bit rate (The amount of video data currently being
read)
Layer number (Only for 2-layered discs)
(L0: Layer 0 is played back. L1: Layer 1 is played
back)
1
2
HDMI video format
Resolution of the HDMI output image
HDMI audio format
Maximum numbers of audio channels that can be
accepted by the connected device
1
2
3
4
Note
• If the HDMI cable is not connected, “---” will be
displayed for HDMI information.
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playback
Press [STANDBY-ON y ].
1
2
OPEN/
CLOSE
Turn on the TV and select the
appropriate input on the TV to which
the unit is connected.
STANDBY-ON DISPLAY
HDMI
Press [OPEN / CLOSE A ] to open the
disc tray.
3
4
SEARCH
CLEAR
A-B
Place the disc on the disc tray with its
label side facing up.
OK
Align the disc to the
disc tray guide.
AUDIO
SUBTITLE
Press [OPEN / CLOSE A ] to close the
disc tray.
MODE
5
It may take a while to load the disc.
Some discs may start playback automatically.
Press [PLAY B] to start playback.
For many of BD-video and DVD-video, a menu
screen may appear.
6
7
In this case, use [K / L / s / B] to select the
desired item, then press [OK].
Press [STOP C ] once to stop
playback temporarily.
Refer to “Resume Playback” on page 21.
To eject the disc:
Press [OPEN / CLOSE A ] to open the disc tray,
then remove the disc before turning off the unit.
Note
•
may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
• During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back
BD-video and DVD-video with disc menu. Refer to
the manual accompanying the disc for details.
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Operations Using Title Menu,
Disc Menu, and Pop-up Menu
Pause
1 During playback, press [PAUSE F ].
• Playback will be paused.
Many of BD-video and DVD-video disc contains title menu
(BD-video / DVD-video), disc menu (DVD-video) or pop-
up menu (BD-video) which guides you through the
available functions in the disc. The contents of the menus
may differ depending on the discs.
2 Press [PLAY B ] to return to normal
playback.
Title menu (BD-video / DVD-video)
1 Press [TOP MENU].
• The title menu will appear.
Note
• For BD and DVD, set “Still Mode” setting to “Field” in
“Video” menu if pictures in the pause mode are
blurred (refer to page 35).
2 Use [K / L / s / B] to select an item, then
press [OK].
3 Press [TOP MENU] to exit.
Disc menu (DVD-video)
Resume Playback
1 Press [POP MENU / MENU].
• The disc menu will appear.
1 During playback, press [STOP C ].
2 Use [K / L / s / B] to select an item, then
• Resume message will appear on the TV screen.
press [OK].
Resume ON
3 Press [POP MENU / MENU] to exit.
Press ‘PLAY’ to play from here.To play the beginning,
press ‘STOP’ first and then ‘PLAY’.
Pop-up menu (BD-video)
• This is a special feature available for some BD-video.
When you press [POP MENU / MENU], a menu pops out
on the TV screen while the contents still play back.
e.g.) BD
1 During the playback of BD-video, press
[POP MENU / MENU].
2 Press [PLAY B ].
• In a few seconds, playback will resume from the
point at which it stopped last. To cancel the resume
playback and start playback the disc from the
beginning, press [STOP C ] again in stop mode.
• The pop-up menu will appear.
2 Use [K / L / s / B] to select an item, then
press [OK].
3 Press [POP MENU/MENU] to exit.
Note
• The resume information will be saved even when the
power is turned off.
• If you open the disc tray or press [STOP C ] again in
stop mode, the resume information will be cleared.
• If you switch between “Disc” mode and “SD Memory”
mode, the resume information will be cleared.
Note
• Contents of menus and corresponding menu
operations may vary among discs. Refer to the
manual accompanying the disc for details.
• If you change “BD Rating Level” or “DVD Rating
Level” setting in “
Parental” menu, the resume
information will be cleared.
• For SD Memory Card, if you open the disc tray or
turned off the power, resume information will be
cleared.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
It is recommended that files to be played back in this
Playing Back an audio CD and a Disc
with JPEG Files
unit are recorded under the following specifications:
<JPEG>
• Upper limit: 2,560 x 1,900 dots
(sub sampling is 4:4:4)
5,120 x 3,840 dots
Insert an audio CD or a disc with JPEG
(sub sampling is up to 4:2:2)
1
files.
• Lower limit: 32 x 32 dots
• File size of image maximum: 12 MB
• The file list will appear on the TV screen.
• If file list does not appear automatically, press
[POP MENU / MENU].
• Press [POP MENU / MENU] to exit and resume
the file list.
Note
• The system can recognize up to 255 folders / 999 files
for CD, 999 folders / 9999 files for DVD and SD
Memory Card.
• The name of folder and file can be displayed up to 28
characters. Unrecognizable characters will be
replaced with asterisks.
• The 9th and deeper hierarchies cannot be displayed
for CD and the 10th and deeper hierarchies cannot
be displayed for DVD and SD Memory Card.
• Files whose extension is other than “.jpg / .jpeg(JPEG)”
will not be listed.
Use [K / L] to select a desired folder
or file, then press [OK].
2
Use [ s / B ] to go back and forward
between the hierarchies.
• If you press [OK] on the desired file, playback
will start.
1
2
4
5
3
File List
• Some unplayable folders or files may be listed due to
the recording status.
JPEG_DISC
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back in this unit.
• This unit recognize up to 8 characters of file name in
the SD Memory Card. Characters after 9th will not be
displayed.
• For the SD Memory Card playback, refer to “Reading
the SD Memory Card” on pages 23-24.
Folder_1
Folder_2
Folder_3
JPEG_A
JPEG_B
JPEG_C
JPEG_D
2 /
4
Folder_1
e.g.) JPEG
audio CD: “CD-DA” will be displayed.
1
JPEG:
Current folder name (Disc or SD
Memory Card name will be displayed
for the top of the hierarchies.)
audio CD: List of the track number and time.
2
3
JPEG:
List of the file / folder names in the
current folder / disc
audio CD: Selected track number and time.
JPEG: Selected file / folder name
Current page / Total page number
4
5
Indication of previous / next page
• Use [SKIP H / G ] to go back and forward
between the pages.
• Press [TOP MENU] to return to the first item.
Icons:
: Folder
: audio CD track
: JPEG file
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Kodak Picture CD
Reading the SD Memory Card
This unit can also run JPEG files stored on Kodak Picture
CD. You can enjoy picture images on the TV set by
playing back the Kodak Picture CD. This unit confirms to
ver.7.0 of Kodak Picture CD. For details of Kodak Picture
CD, contact a shop that provides developing service of
Kodak Inc.
You can play back the JPEG files in an SD Memory Card.
With the SD Memory Card, you can also enjoy the special
additional contents for BD-ROM Profile 1 ver.1.1 which
can be downloaded from the internet. You can store the
contents on an SD Memory Card via computer and play
them back with the BD-video. For more information
about the special additional contents, please refer to the
instruction book that came with the disc.
When Kodak Picture CD is inserted in
1
this unit, Kodak Picture CD menu
appear automatically on the TV
screen.
■ Setting the media mode
In stop mode, press [SETUP].
1
Photo A
Photo B
Photo C
Photo D
Photo E
Photo F
Use [ K / L ] to select
, then press
2
[OK].
H
7 / 32
G
Custom
2
1
2
1. Current track number / The total number of tracks
2. Indication of previous / next page
• In stop mode, press [POP MENU / MENU] to call
Kodak Picture CD menu.
Language
Video
Audio
Parental
Others
Use [K / L / s / K] to select a desired
track to be played back, then press
2
[PLAY B ] or [OK].
• An image will be played back from the
selected track and go to the next one in turn.
Use [ K / L ] to select
[OK].
, then press
• Use [SKIP H / G ] to go back and forward
3
between the pages.
Press [STOP C] to stop playback.
Others
3
Angle Icon
On
On
Auto
5sec
Disc
Auto Power Off
Panel Display
Slide Show
Tips for JPEG / Kodak Picture CD Playback
Media Select
• Every press on [ANGLE] will turn the image clockwise
by 90 degrees when an image is displayed.
• To change the visual effect for switching the playback
image, press [MODE] once, then use [s / B] or [OK] to
switch between “Cut In/Out” and “Fade In/Out”. The
size change may have no effect on some files (e.g. files
with a small picture size).
• During JPEG / Kodak Picture CD playback, press
[MODE] twice to change the size of the playback
image, then use [s / B] or [OK] to switch between
“Normal” (100%) and “Small” (95%). The size change
may have no effect on some files (e.g. files with a
small picture size).
Use [ K / L ] to select “Media Select”
setting.
4
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Press [OK] repeatedly to select “SD
Memory”.
Inserting the SD Memory Card and playback
5
6
Insert an SD Memory Card into the
SD card slot until it clicks with the
label facing up.
The file list will appear.
1
Others
Angle Icon
On
Auto Power Off
Panel Display
Slide Show
On
Auto
5sec
Media Select
SD Memory
SD Memory Card
• This will set the unit to “SD Memory” mode. To
play back the contents in any discs, exit “SD
Memory” mode by selecting “Disc”.
Follow the step 2 in “Playing Back an
audio CD and a Disc with JPEG Files”
on page 22.
2
Press [SETUP] to exit.
Removing the SD Memory Card
In stop mode, push the SD Memory
Card and then slowly remove your
finger.
1
2
Grasp the card and pull it out from
the SD card slot.
Compatible Cards:
- SD Memory Card (8MB - 2GB)
- SDHC Memory Card (4GB)
- miniSD Card (8MB - 2GB)
- microSD Card (8MB - 2GB)
• For miniSD Card and microSD Card, the adapter will
be required.
Note
• Do not remove the card during its playback.
• This unit supports SD Memory Card with FAT12 /
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit might not read
the SD Memory Card.
• This unit recognize up to 8 characters of file name in
the SD Memory Card. Characters after 9th will not be
displayed.
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Fast Forward / Fast Reverse
Step by Step Playback
1 During playback, press [FWD D]
1 In pause mode, press [PAUSE F]
repeatedly for fast forward.
repeatedly.
During playback, press [REV E] repeatedly for fast
reverse.
Every time you press [PAUSE F], playback will
advance one step at a time.
Every time you press [FWD D] or [REV E], the
2 Press [PLAY B] to return to normal
playback speed will change.
playback.
2 Press [PLAY B] to return to normal
playback.
Note
• Only step by step forward is available.
Note
• Set “Still Mode” setting to “Field” in “Video” menu if
pictures in step by step playback mode are blurred
(refer to page 35).
• For BD and DVD, the approximate speed for the fast
forward or reverse playback is 1 (2x), 2(8x), 3 (20x),
4 (50x), and 5 (100x).
• For audio CD, the approximate speed is 1 (2x), 2 (8x),
and 3 (30x).
• For audio CD, fast forward / fast reverse search
between different tracks are not available during
program and random playback.
Repeat Playback
Available repeat functions vary depending the discs.
1 During playback, press [REPEAT]
repeatedly to select the desired repeat
mode.
Slow Forward Playback
Repeat mode
Available media
Chapter repeat
The current chapter will be
played back repeatedly.
Title repeat
The current title will be
played back repeatedly.
Track repeat
The current track or file
will be played back
repeatedly.
Group repeat
The current folder will be
played back repeatedly.
1 During playback, press [PAUSE F], then
press [FWD D].
Every time you press [FWD D], playback speed will
change.
2 Press [PLAY B] to return to normal
playback.
Note
• The approximate speed for the slow forward
playback is 1(1/16x), 2(1/8x), 3(1/2x).
• Only slow forward is available.
All repeat
All tracks in the media will
be played back repeatedly.
• Set “Still Mode” setting to “Field” in “Video” menu if
pictures in the slow forward playback mode are
blurred (refer to page 35).
Note
• The repeat setting will be canceled when you stop
playback.
• The chapter, title, track or group repeat will be
cleared when moving to other chapter, title, track /
file or folder.
• Repeat playback does not function during A-B repeat
playback.
• Chapter and title repeat are not available with some
scenes.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
A-B Repeat
Program Playback
You can play back the disc in your desired order.
You can play back the specific part (between point A and
point B) repeatedly.
1 In stop mode, press [MODE].
1 During playback, press [A-B] at the
• The program screen will appear.
desired starting point A.
2 Use [K / L] to select a track / file, then
2 During playback, press [A-B] at the
press [OK].
desired ending point B.
Program
As soon as you set the point B, the part between point
A and point B will start playback repeatedly.
• To cancel the A-B repeat, press [A-B] again.
CD-DA
Total
0:09:49
1
2
3
4
5
6
7
3:40
2:33
2:22
2:28
2:45
3:41
2:58
1
4
6
3:40
2:28
3:41
Note
• Point B should be set within the same title or track as
point A.
• A-B repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B repeat does not function during chapter, title,
track, group or all repeat playback.
1 /
3
1 /
1
6
3:41
e.g.) audio CD
• For JPEG files, use [K / L] to select a folder, then
press [OK] first, and then use [K / L] to select a file,
then press [OK].
PIP (Picture in Picture) Setting
• Press [CLEAR] to erase the last file of the program.
• Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the
right hand screen.
• If the entire program cannot be displayed on the TV
screen, “L”or “K” appears.
Some BD-video have the PIP (picture-in-picture) function
which enables you to display the secondary video in the
primary video. You can call up the secondary video by
pressing [PIP] whenever the scene contains the
secondary video.
• Use [s / B] to go back forward between the
hierarchy of folders.
• If 8 or more tracks / files were set in a program, use
[SKIP H / G ] to see all the tracks / files.
primary
video
3 Press [PLAY B ] to start program
playback.
• Program playback will start.
Note
secondary
video
• During program playback, press [STOP C ] once to
set the resume point, and then press [PLAY B ] to
resume program playback from where [STOP C ]
was pressed (audio CD) or from beginning of the file
where [STOP C ] was pressed (JPEG).
• During program playback, press [STOP C ] twice to
display the program screen. To go back to the
normal program playback, press [RETURN] to exit
from the program screen, then press [PLAY B ].
1 During playback, press [PIP].
PIP information will appear.
2 Use [K / L] to select the secondary video
you want.
• The secondary video will be displayed and the
secondary audio will be output.
• If you open the disc tray, remove the SD Memory
Card or turned off the power, the program will be
cleared.
3 Press [RETURN] or [PIP] to remove the PIP
information.
• Up to 99 tracks / files can be entered.
Note
• To repeat the current track / file in the program,
• The the secondary audio will not be output when the
secondary audio is set to “Off” or when “BD Audio
Mode” is set to “HD Audio Output”. Refer to
“Switching Audio Soundtrack” on page 29 and
“Setting the BD Audio Mode” on page 30.
press [REPEAT] repeatedly until “
Track”
appears during play back. To repeat the entire
program, press [REPEAT] repeatedly until “
appears during playback.
• Playback from a desired track / file and random
playback are not available during program playback.
All”
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Random Playback
Camera Angle
This function shuffles the playback order of tracks / files.
Some BD-video and DVD-video contain scenes which
have been shot simultaneously from various angles. You
1 In stop mode, press [MODE] twice.
can change the camera angle when
appears on the TV
• The random screen will appear.
screen.
Random
1 During playback, press [ANGLE].
CD-DA
Total
0:41:06
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2 Use [K / L] to select your desired angle.
Random Program
-- no indication --
1 / 3
Note
• If “Angle Icon” setting is “Off” in “Others” menu,
will not appear. Refer to page 41.
e.g.) audio CD
2 Press [PLAY B ] to start random
playback.
Note
• During the random playback, press [STOP C ] once
to set the resume point, and then press [PLAY B ] to
resume random playback from where [STOP C ] was
pressed (audio CD) or from beginning of the file
where [STOP C ] was pressed (JPEG).
• During random playback, press [STOP C ] twice to
display the random playback screen. To cancel the
random playback, press [MODE] when the random
playback screen is displayed.
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until “
Track” appears during playback. To repeat the entire
random selection press [REPEAT] repeatedly until
“
All” appears during playback.
• You cannot go back to the previous track / file during
random playback.
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
■ Marker search
Using [SKIP H / G ]
This feature allows you to assign a specific point on a title
or track to be called back later.
1 During playback, press [SKIP G] to
move to the next track. Press it
1 During playback, press [SEARCH]
repeatedly until the marker setting
menu appears.
repeatedly to skip to subsequent tracks.
Press [SKIP H ] once to go back to the
beginning of the current track. Press it
repeatedly to go to the previous tracks.
2 Use [s / B] to select a marker number
(1-9).
• For JPEG files, press [SKIP H ] to go back to the
previous file.
___ __ : __ :__
Note
3 When the disc reaches the point at which
• For BD and DVD, if title contains no chapters,
you want to set a marker, press [OK].
[SKIP H / G ] changes the title.
• For JPEG files, [ s / B ] is also available.
• The title or track and elapsed playback time will
appear on the TV screen.
4 Press [SEARCH] or [RETURN] to exit.
5 To return to the marker later, call the
marker setting by pressing [SEARCH]
repeatedly during playback or in stop
mode, and use [s / B] to select a desired
marker, then press [OK].
Using [SEARCH]
By using [SEARCH], you can select following search
modes.
Search mode
Available media
/
Chapter / Title search
Note
• Opening the disc tray, turning off the power or
Track search
Time search
Marker search
selecting “
” at step 2 and pressing [OK] will
erase all markers.
• To clear a marker, use [s / B] to select the marker
number to be cleared and press [CLEAR].
• You can mark up to 9 points.
•
For BD, marker search between different titles is not
available.
1 During playback, press [SEARCH]
repeatedly until your desired search
mode appears.
• For BD, you can return to the maker only during
playback.
2 Enter the desired chapter, title, track, file
number or time to search for using [the
Number buttons].
• Chapter, title, track or time search will start.
• Press [CLEAR] to erase an incorrect input.
Note
• During program and random playback, search
functions are not available except the search using
[SKIP H / G ].
• Time search is available only in the same track, file or
title.
• For BD, chapter and time search are available only
during playback.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL SETTINGS
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
Some BD and DVD may have subtitles in 1 or more
languages. For commercially available discs, the
supported languages can be found on the disc case.
Follow the steps below to switch the subtitle languages
during playback.
Some BD and DVD contain multiple audio streams. Those
are often in different audio languages or audio formats.
For BD, available audio varies depending on “BD Audio
Mode” setting. Refer to page 36 for more information.
1 During playback, press [AUDIO]
repeatedly to display “Primary” or
“Secondary”.
1 During playback, press [SUBTITLE]
repeatedly to display “Primary”,
“Secondary” or “Subtitle style”.
“Primary”:
Sets the audio for the primary video.
“Primary”:
Sets the subtitle for the primary
video.
“Secondary”: Sets the audio for the secondary video.
2 Use [K / L] to select your desired audio
”Secondary”:
Sets the subtitle for the secondary
video.
stream channel.
“Subtitle Style”: Sets style of the subtitle.
Primary
1
JPN Dolby D
2ch
/ 2
2 Use [K / L] to select your desired subtitle
• For “Secondary”, use [{ / B] to switch between
current audio setting and “Off”.
or style.
Primary
1
JPN / 4
3 Press [AUDIO] repeatedly to exit.
• Use [{ / B] to switch between current subtitle
setting and “Off”.
1 During playback, press [AUDIO].
3 Press [SUBTITLE] repeatedly to exit.
2 Use [K / L] to select your desired audio
stream channel.
1 During playback, press [SUBTITLE].
1
ENG
Dolby D 3/2.1ch
48k
/ 3
2 Use [K / L] to select your desired
e.g.) DVD-video
subtitle.
• For audio CD, you can select following options.
“Stereo”: Both right and left channels are active (stereo).
1
ENG
/ 4
“L-ch”:
“R-ch”:
Only left channel is active.
Only right channel is active.
• Use [{ / B] to switch between current subtitle
setting and “Off”.
3 Press [SUBTITLE] to exit.
3 Press [AUDIO] to exit.
Note
• The secondary audio will not be output when the
secondary video is not displayed or when “BD Audio
Mode” is set to “HD Audio Output”.(For some BD,
secondary audio will be output even when
secondary video is off.)
Note
• Some discs will only allow you to change the
subtitles from the disc menu or pop-up menu. Press
[TOP MENU] or [POP MENU / MENU] to display the
disc menu or pop-up menu.
• The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow to change audio language setting on
the disc menu. (Operation varies depending on the
discs. Refer to the manual accompanying the disc.)
• [AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVD which allow to
change audio setting on the disc menu).
• If 4-digit-language code appears in the subtitle
menu, refer to “LANGUAGE CODE” on page 45.
• If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.
• During playback of the secondary video, the primary
subtitle setting is not available except when there is
no subtitle for the secondary video.
•
If you select a language that has a 3-letter-language code,
the code will be displayed every time you change the
audio language setting. If you select any other languages,
“---” will be displayed instead (refer to page 45).
• Secondary subtitle setting is only available during
playback of the secondary video.
• If you choose a language that has a 3-letter-language
code, the code will be displayed every time you
change the subtitle language setting. If you choose
any other Languages, “---” will be displayed instead
(refer to page 45).
• If 4-digit-language code appears in the subtitle
menu, refer to “LANGUAGE CODE” on page 45.
• If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL SETTINGS
Setting the BD Audio Mode
Adjusting the Picture
There are 2 ways to set “BD Audio Mode” setting;
whether to output the secondary and interactive audio
accompanied by the primary audio or only the primary
audio. Depending on the setting of the mode, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS, or DTS-HD
output changes between multi LPCM and bitstream.
You can adjust the picture quality.
1 During playback, press [MODE].
2 Use [K / L] to select your desired item,
then use [s / B] to adjust the setting.
Black Level
On
Off
s
B
1 In stop mode with BD inserted, press
Noise Reduction
[MODE].
2 Use [K / L] to select your desired setting.
■ Black level
BD Audio Mode
Mix Audio Output
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can
select “On” or “Off”
“On”: Makes the dark parts brighter.
“Off”: Shows the original picture as recorded.
“Mix Audio Output”:
If it is available, BD-video’s secondary and interactive
audio will be output with the primary audio.
• The secondary audio is the audio for the secondary
video (Director’s comment etc.) and the interactive
audio is the audio for the interactive application
(Button click sounds etc.).
■ Noise reduction
Reduces the noise of the playback picture.
“1”: Executes MPEG noise reduction which reduces the
block noise and mosquito noise on the subtitle on
movie.
“2”: Executes 3D noise reduction which detects and
deletes the noise by comparing each picture
frames.
“HD Audio Output”:
Only the primary audio will be output. Set this mode in
order to output Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD audio of BD through HDMI
connection.
“3”: Executes both MPEG noise reduction and 3D noise
reduction.
3 Press [RETURN] to exit.
• You can also set “BD Audio Mode” from the setup
menu. Refer to page 36.
3 Press [RETURN] repeatedly to exit.
Note
Note
• In “Mix Audio Output” mode, if there is no secondary
and interactive audio, the audio will be output as
“HD Audio Output” mode.
• The setting remains even you turn off the unit.
• For the picture output from HDMI OUT, “Black Level”
is not effective.
• In “Mix Audio Output” mode, even if you set “HDMI
Multi(Normal)” in “HDMI Audio Out” setting, multi
LPCM will be output from HDMI OUT jack for BD
audio. Refer to page 14.
• For BD, noise reduction is not effective.
• In “Mix Audio Output” mode with HDMI audio being
output, 2-channel down-mixed LPCM will be output
from DIGITAL OUT jack for BD audio.
• In “Mix Audio Output” mode with “HDMI Audio Out”
setting set to “Audio Mute” and “Digital Out”setting
set to “Bitstream”, DTS, DTS-HD and LPCM will be
output as Dolby Digital for BD audio. Refer to pages
14, 16.
• You can also set “ BD Audio Mode” setting from the
setup menu. Refer to page 36.
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Using the Setup Menu
In the setup menu you can change the setting for audio,
video, language, etc. You cannot change the setting
during playback.
DISPLAY
HDMI
Quick
“
“
Quick” menu contains setting items extracted from
Custom” menu which may be used frequently.
SEARCH
CLEAR
A-B
In stop mode, press [SETUP].
1
2
3
Use [K / L] to select , then press
[OK].
OK
AUDIO
SUBTITLE
Use [K / L] to select your desired
setting items.
Quick
MODE
BD Audio Mode
HDMI Audio Out
HDMI Video Resolution
Component Output
Player Menu
Mix Audio Output
HDMI Multi(Normal)
Auto
480i
English
TV Aspect
16:9 Wide
Follow the procedure below
depending on the setting items.
4
5
A) If “ B “ does not appears on the right side
of the setting items when you highlight
the items:
Press [OK] repeatedly to change options.
B) If “
B
“ appears on the right side of the
setting items when you highlight the
items:
1) Press [OK].
2) Use [K / L] to select options, then press
[OK].
• Use [s] or [RETURN] to go back to the
previous screen.
Press [SETUP] to exit.
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Custom
“
Custom” menu contains all the setting items.
DISPLAY
HDMI
In stop mode, press [SETUP].
1
2
3
Use [K / L] to select , then press
[OK].
SEARCH
CLEAR
A-B
Use [K / L] to select your desired
setting category, then press [OK].
: Language
: Video
: Audio
OK
: Parental
: Others
RETURN
AUDIO
• For “
Parental” menu, follow the procedure
SUBTITLE
on page 40.
Use [K / L] to select your desired
4
5
setting items.
• The setting items which are not available with
current situation of this unit will be displayed
in gray and you cannot select them.
MODE
Follow the procedure below
depending on the setting items.
A) If “ B “ does not appears on the right side
of the setting items when you highlight
the items:
Press [OK] repeatedly to change options.
B) If “
B
“ appears on the right side of the
setting items when you highlight the
items:
1) Press [OK].
2) Use [K / L] to select options, then press
[OK].
• Use [s] or [RETURN] to go back to the
previous screen.
Press [SETUP] to exit.
6
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
■
Language
Language
Audio
Subtitle
Original
Off
Disc Menu
Player Menu
English
English
• For how to select the setting items and options, refer to “
Custom” on page 32.
Setting items
Options
Audio
Original* / English / French / Spanish / German / Italian / Swedish / Dutch /
Russian / Chinese / Japanese / Korean / Danish / Finnish / Norwegian /
Icelandic / Hungarian / Romanian / Turkish / Greek / Irish / Portuguese /
Polish / Czech / Slovak / Bulgarian / Other
Sets the language for audio.
Subtitle
Sets the language for subtitle.
Off* / English / French / Spanish / German / Italian / Swedish / Dutch /
Russian / Chinese / Japanese / Korean / Danish / Finnish / Norwegian /
Icelandic / Hungarian / Romanian / Turkish / Greek / Irish / Portuguese /
Polish / Czech / Slovak / Bulgarian / Other
Disc Menu
English* / French / Spanish / German / Italian / Swedish / Dutch / Russian /
Chinese / Japanese / Korean / Danish / Finnish / Norwegian / Icelandic /
Hungarian / Romanian / Turkish / Greek / Irish / Portuguese / Polish / Czech /
Slovak / Bulgarian / Other
Sets the language for disc menu or
pop-up menu.
English* / Français / Español
Player Menu
Sets the language for OSD
(on-screen display).
• Settings with (*) are the default.
• “Quick” menu consists of the setting menus frequently used, and they are accompanied with
.
• If you select “Other”, enter the 4-digit-number code for the desired language (Refer to “LANGUAGE CODE” on
page 45). Only the languages supported by the disc can be selected.
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
■
Video
Video
TV Aspect
16:9 Wide
Auto
Auto
480i
Auto
HDMI Video Resolution
HDMI Deep Color
Component Output
Progressive Mode
Still mode
Auto
• For how to select the setting items and options, refer to “
Custom” on page 32.
Setting items
Options
16:9 Wide*:
TV Aspect
Select this when a wide-screen TV is connected. Discs recorded in wide-
screen format is played back over the entire TV screen.
Sets the picture size according to
aspect ratio of the connected TV.
4:3 Pan & Scan:
Select this to play back the discs recorded in wide-screen format with 4:3 TV
in the pan & scan mode (with the sides of the picture cut off). Discs which are
not specified for pan & scan are played back in the letter box mode.
4:3 Letter Box:
Select this to play back the discs recorded in wide-screen format with 4:3
TV in the letter box mode. (with black strips at the top and bottom).
16:9 Squeeze:
When playing back 4:3 images, the picture is displayed in the center of the
16:9 screen with a 4:3 aspect ratio.
Auto*:
HDMI Video Resolution
Sets the HDMI video resolution.
HDMI video resolution will be selected automatically depending on the
connected HDMI device.
480p
720p
1080i
1080p
1080p24:
Gives a natural and high quality film reproduction of 24-frame film
material. The connected TV has to be compatible with 1080p24 frame
input.
HDMI Deep Color
Auto*:
Sets whether to output the picture
from HDMI OUT jack with Deep
Color or not.
The picture from HDMI OUT jack will be output with Deep Color to the
connected TV which supports HDMI Deep Color.
Off:
The picture from HDMI OUT jack will be output without Deep Color.
Component Output
480i*
480p
720p
1080i
Sets the video resolution for
component output.
Progressive Mode
Auto*:
Sets the optimum progressive
mode for the image material
output from HDMI OUT jack and
COMPONENT VIDEO OUT jacks.
Suited for playing back video material discs (TV shows or animation).
Video:
The progressive mode will detect 24-frame film material (movies) and
automatically select appropriate progressive mode.
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Setting items
Still Mode
Options
Auto*:
Adjusts picture resolution and
Automatically selects the best resolution setting (“Frame” or “Field”) based
on the data characteristics of the pictures.
quality in still mode.
Field:
Stabilizes the pictures, although the picture quality may become coarse
due to the limited amount of data. Select “Field” when the pictures are still
unstable even if “Auto” is selected.
Frame:
Displays relatively motionless pictures in higher resolution. “Frame”
improves the picture quality, although it may unstabilize the pictures due
to alternate output of 2-field data.
• Settings with (*) are the default.
• “Quick” menu consists of the setting menus frequently used, and they are accompanied with
.
• If you set “HDMI Video Resolution” setting to “1080p24” and the contents of the BD are not compatible for
1080p24 frame, 1080p60 frame will be output.
• An individual picture on the TV screen is called as “Frame” , which consists of two separate images called as
“Field”. Some pictures may be blurred at the auto setting in “Still Mode” setting due to their data characteristics.
• If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output”
setting, press and hold [ B PLAY] on the front panel for more than 5 seconds. Both settings will be reset to the
default automatically.
• If an HDMI cable is connected, for video resolution for the component output, you can only select video
resolution that currently output from HDMI OUT jack or “480i”.
• If the video resolution for the component output and HDMI video resolution do not match, the video resolution
for the component output will be switched to “480i”. COMPONENT VIDEO OUT jacks may not output any signals
depending on the disc material.
• COMPONENT VIDEO OUT jacks may not output any signals when you set “HDMI Deep Color” setting to “Auto”.
• If you play back copy-protected DVD-video, 480p signal will be output from COMPONENT VIDEO OUT jacks,
when “Component Output” setting is set to “720p” or “1080i”.
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
■
Audio
Audio
BD Audio Mode
HDMI Audio Out
Down Sampling
DRC
Mix Audio Output
HDMI Multi (Normal)
On
Auto
Off
Virtual Surround
• For how to select the setting items and options, refer to “
Custom” on page 32.
Setting items
Options
Mix Audio Output*:
BD Audio Mode
Outputs the secondary and interactive audio with primary audio if it is available.
HD Audio Output:
Outputs only the primary audio. Set this mode in order to output Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD
through HDMI connection.
For BD, selects whether to output
the secondary and interactive
audio with primary audio if it is
available or only the primary
audio. Refer to “Setting the BD
Audio Mode” on page 30.
HDMI Multi(Normal)*:
HDMI Audio Out
The multi-channel audio signals are output from HDMI OUT jack with
bitstream or LPCM.
Sets the audio format for the
audio output from HDMI OUT jack.
HDMI Multi(LPCM):
The multi-channel audio signals are output from HDMI OUT jack with LPCM.
• Refer to pages 37-39 for setting options.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format from DIGITAL OUT jack.
• Refer to “Digital out setting” on page 37 for setting options.
Down Sampling
On*:
Sets the digital audio output
when playing back BD or DVD
recorded in LPCM.
LPCM signals are converted to 48 kHz for output.
• Set to “On” when using digital connections to an AV amplifier that is not
compatible with sampling frequencies of 96 kHz.
Off:
For BD and DVD recorded in LPCM without copyright protection, 2-channel
audio signals up to 192 kHz are output as LPCM signals with no conversion.
DRC
Auto*:
Sets whether to compress the
range of sound volume (dynamic
range control) when Dolby Digital,
Dolby Digital Plus or Dolby
When the discs recorded in Dolby TrueHD format are in playback, this unit detects
DRC setting of the disc and set “DRC” setting to “On” or “Off” automatically.
Off
On
TrueHD audio is played back.
Virtual Surround
Off*:
Sets to create a surround effect in
a system with 2 speakers
connected.
Virtual surround is set to off.
1:
A natural surround effect in a system with 2 speakers connected.
2:
A stronger surround effect in a system with 2 speakers connected than “1”.
• Settings with (*) are the default.
• “Quick” menu consists of the setting menus frequently used, and they are accompanied with
• Under following circumstances, “HDMI Multi(Normal)” and “HDMI Multi(LPCM)” are not available.
- HDMI cable is not connected to HDMI OUT jack.
.
- Connected TV is off.
- Connected TV is not compatible with audio output.
• Set “Virtual Surround” setting to “Off” or lower the volume if the sound is distorted.
• For the virtual surround, audio signal will always be 2-channel LPCM.
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
■ Digital out setting
When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be muted and the audio signals
output from DIGITAL OUT jack changes depending on “Digital Out” setting.
Quick HDMI Audio Out Audio Mute Digital Out
Bitstream*:
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD,
the corresponding core stream (Dolby Digital or DTS) are output.
LPCM:
LPCM signal will be output from DIGITAL OUT jack.
• This setting is not effective when the HDMI audio signal is output.
■ Speaker setting
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.
Front speaker (left)
Front speaker (right)
Center speaker
Subwoofer
Surround speaker (left)
Surround speaker (right)
Surround back speaker (left)
Surround back speaker (right)
e.g.) basic layout with 7.1-channel surround system
To make the most of its feature, set up your speakers appropriately by referring to the following table.
Speaker setting options are available at the following locations;
<Speaker setting for the audio signal output from HDMI OUT jack>
(Available when you have HDMI cable connected to HDMI OUT jack)
Quick HDMI Audio Out HDMI Multi(LPCM)
Custom Audio HDMI Audio Out HDMI Multi(LPCM)
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
How to navigate through “HDMI Multi(LPCM)”.
1 Use [K / L] to select your desired menu item then press [OK].
2 Use [K / L] to select your setting items.
• Press [RETURN] to go back to the previous screen.
3 Use [s / B] to select desired options. (Except for “Test Tone” and “Default”.)
For “Test Tone”:
Use [s / B] to select “Off”, “Manual” or “Auto”, then press [OK].
• The test tone will be output. If you select “Manual”, use [K / L] to select desired speaker, then use [s / B] to
adjust the volume. If you select “Auto”, use [s / B] to adjust the volume of the speaker that outputs the test
tone.
• If you want to stop the test tone, press [RETURN].
For “Default”:
Press [OK] to reset to the default.
4 Press [SETUP] to exit.
Menu
Speaker Size
Setting items
Front
Options
Large*
Descriptions
Large:
Selects the desired
speaker to set. Then
change the setting
appropriately by
referring to the
For the large speakers with strong low
frequency reproduction capabilities.
Small:
For the small speakers which do not
provide strong bass sound.
You cannot change the setting of
“Subwoofer”. If connected device is not
compatible with subwoofer, “Subwoofer”
will be displayed in gray.
Small
Large*
Small
On
Center
Subwoofer
Surround
descriptions.
Large*
Small
Large*
Small
Surround Back
Default
Select “Default”, then press [OK] to reset
“Speaker Size” setting to the default.
Channel Level
Test Tone:
Off*
Select “Off” to deactivate “Test Tone”.
Tests or sets the volume
for each speakers.
“Test Tone” is the
test tone which
can be output
Select “Manual”, then press [OK] to
manually set the volume for the desired
speaker.
Manual
Auto
from the speakers
so that you can
adjust the volume
for each speaker.
Select “Auto”, then press [OK] to
automatically output the test tone from
each speakers.
Front Lch
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
If you have selected “Manual” in “Test
Tone”, select the desired speaker to set
and adjust the volume for the selected
speaker.
If you select “Auto” in “Test Tone”, test
tone will automatically be output in order.
Adjust the volume of the speaker that
outputs the test tone.
Center
Subwoofer
Front Rch
Surround Rch
0 dB to -12 dB
(0 dB*)
Surround Back
Rch
0 dB to -12 dB
(0 dB*)
Surround Back
Lch
0 dB to -12 dB
(0 dB*)
Surround Lch
0 dB to -12 dB
(0 dB*)
Default
Select “Default”, then press [OK] to reset
“Channel Level” setting to the default.
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Menu
Delay Time
Setting items
Distance
Options
Descriptions
Set the desired measure system. This
measure system will be used for
Feet*
This is a parameter for
optimizing the timing at
which the sound is
output from the
speakers according to
their distance from the
listening position.
Meters
“Delay Time” setting. Press [OK] to switch
the settings.
Front
0ft to 60ft (12ft*)
(0m to 18m (3.6m*))
0ft to 60ft (12ft*)
Select the distance from the listening
position to the speaker to get the ideal
delay time.
Center
(0m to 18m (3.6m*))
Surround
Surround Back
Default
0ft to 60ft (10ft*)
(0m to 18m (3.0m*))
0ft to 60ft (10ft*)
(0m to 18m (3.0m*))
Select “Default”, then press [OK] to reset
“Delay Time” setting to the default.
• Settings with (*) are the default.
• For “Speaker Size” setting, the settings of each speaker sizes may be adjusted automatically corresponding to
each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and “Surround Back” to “Large”.)
• For “Delay Time” setting, the difference among the value of the each speaker cannot exceed 15 ft (4.5m).
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
■
Parental
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback
will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back
the disc.
Parental
BD Rating Level
DVD Rating Level
Password Change
ALL
ALL
1 Use [K / L] to select , then press [OK].
2 Use [the Number buttons] to enter your 4-digit password.
For the first time use: Use [the Number buttons] enter any 4-digit number (except for 4737), then press [OK].
That number will be used as the password from the second time. Record your password in case you forget it.
• If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be set to “All”.
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.
3 Proceed to A – C
A) BD Rating Level
1) Use [K / L] to select “BD Rating Level”, then press [OK].
2) Use [K / L] to select your desired option, then press [OK].
“All”:
To release the limitation.
“Age Setting”: To set the age limitation.
• After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254. (e.g. for age 15, press
[0],[1],[5])
3) Press [SETUP] to exit.
B) DVD Rating Level
1) Use [K / L] to select “DVD Rating Level”, then press [OK].
2) Use [K / L] to select your desired level, then press [OK].
3) Press [SETUP] to exit.
RATING EXPLANATIONS
• All
: Parental control is inactive; all discs can be played back.
: DVD software of any grades (adult/general/children) can be played back.
: No one under 17 admitted.
• 8 [Adult]
• 7 [NC-17]
• 6 [R]
• 5 [PGR]
• 4 [PG-13]
• 3 [PG]
• 2 [G]
: Restricted; under 17 requires accompanying parent or adult guardian.
: Parental guidance recommended.
: Unsuitable for children under 13.
: Parental guidance suggested.
: General audience.
• 1 [Kid Safe] : Suitable for children.
C) Password Change
1) Use [K / L] to select “Password Change”, then press [OK].
2) Enter a new 4-digit password, then press [OK].
3) Press [SETUP] to exit.
Note
• The resume information will be cleared if you change the parental level when the resume information is on.
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
■
Others
Others
Angle Icon
On
Auto Power Off
Panel Display
Slide Show
On
Auto
5sec
Disc
Media Select
• For how to select the setting items and options, refer to “
Custom” on page 32.
Setting items
Options
Angle Icon
On*:
The angle icon appears on the TV screen when playing back the scene with
various angle.
Off:
The angle icon disappears on the TV screen.
Auto Power Off
On*:
If this unit is left with no activity for more than 30 minutes, this unit turns
off automatically.
Off:
Sets off the auto power off.
Panel Display
Auto*:
Sets the brightness of the front
panel display.
Front panel display gets darker during playback.
Bright:
Front panel display gets brighter.
Dimmer:
Front panel display gets darker.
Slide Show
5sec*
Sets the display time for the still
picture (in JPEG format) playback
10sec
Media Select
Disc*:
Selects the media to playback.
Select this when you play back a disc.
SD Memory:
Select this when you play back an SD Memory Card.
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Initialize
Initialize the setting or SD Memory Card.
DISPLAY
HDMI
In stop mode, press [SETUP].
1
2
Use [K / L] to select , then press
[OK].
SEARCH
CLEAR
A-B
Use [K / L] to select a desired option,
3
then press [OK].
“No”:
Exits without any initialization.
“Setup”: Resets the setup menu to the default.
“Memory Device”:
OK
SETUP
Initializes the SD Memory Card. After
confirmation message appears, use
[K / L] to select “Yes”, then press [OK].
AUDIO
SUBTITLE
Initialize
Initialize?
No
MODE
Setup
Memory Device
Press [OK]. (For “Setup” and “
Memory Device” only)
4
5
Press [SETUP] to exit.
Note
• The setting for “
Parental” will not be reset.
• If SD Memory Card is not inserted, “Memory Device”
will be displayed in gray.
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the
following checklist.
Problem
Solution
No power
- Check if the AC cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.
No sound or picture
- Check if the connected TV is turned on.
- Check if the connections are made securely and correctly.
- Check whether the connected TV or other device supports HDCP. (This unit will
not output a video signal unless the other device supports HDCP.)
- Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
- Check if “HDMI Deep Color” setting is set to “Auto”. If it is the case, set it to “Off”.
- Set “HDMI Video Resolution” setting other than “Auto” or “1080p24”.
- Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
Distorted picture
- Connect this unit directly to the TV. If the RCA audio / video cables are connected
to a VCR, pictures may be distorted due to the copy right protection system.
Completely distorted picture or
black / white picture with BD / DVD
- Make sure the disc is compatible with this unit.
No sound or distorted sound
- Adjust the volume.
- Check that the speakers are connected correctly.
- Check the HDMI connections.
- Check the settings in “ Audio” menu.
Picture freezes momentarily
during playback
- Check the disc for fingerprints / scratches and clean with a soft cloth wiping
from center to edge.
- Clean the disc.
Disc cannot be played back
- Clean the disc.
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a correct disc that can be played back on this unit.
SD Memory Card cannot be read. - The format of the card does not match to this unit or the card is not compatible.
No return to start-up screen
when disc is removed
- Reset this unit by turning it off, then on again.
The unit does not respond to the - Aim the remote control directly at infrared sensor window on the front panel.
remote control
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+ / - signs) as indicated.
Buttons do not work or the unit - To completely reset the unit, unplug the AC cord from the AC outlet for 5-10
stops responding
seconds.
The unit does not respond to
some operating commands
during playback
- Operations may not be permitted by the disc.
Refer to the instructions of the disc.
The unit cannot read BD / DVD / - Condensation? (Let sit 1 or 2 hours)
CD
-
You are attempting to playback a disc other than one with one of the marks on
page 17.
- Wipe the dirt off the disc or replace the disc.
Angle does not switch
- The angle cannot be switched for BD / DVD which do not contain multiple
angles. In some cases multiple angles are only recorded for specific scenes.
Playback does not start when
the title is selected
- Check the settings in “
Parental” menu.
The password for rating level has - Enter the default password “4737”, then your forgotten password will be cleared.
been forgotten
Note
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this
manual for details on correct operations.
• Some functions are prohibited on some discs.
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
Dolby TrueHD
An electrical signal that directly represents sound.
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc supports 7.1
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also multi-channel surround sound output.
“Digital Audio”.
DTS (Digital Theater System):
Aspect Ratio
DTS is a multi-channel surround sound system. By
connecting to DTS decoder, you can enjoy movie dynamic
and realistic sound like movie theater. DTS surround sound
technologies were developed by DTS, Inc.
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
DTS-HD
BD-Java
DTS-HD is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc supports 7.1 multi-channel surround sound
output.
With some BD which support Java applications, you can
enjoy the interactive functions such as games or
interactive menus.
Blu-ray Disc (BD)
HDMI (high-definition multimedia interface)
Blu-ray Disc is a next generation optical video disc which
A digital interface between audio and video source. It can
is capable of storing much more data than a conventional transmit component video, audio, and control signal with
DVD is. The large capacity makes it possible to benefit
from the features such as high-definition videos, multi-
channel surround sounds, interactive menus and so on.
one cable connection.
JPEG (joint photographic experts group)
JPEG is a method of compressing still picture files. You
can copy JPEG files on CD-RW/-R, DVD or SD Memory
Card from a computer and play back the files in this unit.
Chapter
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
See also “Title”.
PCM (pulse code modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a lot
of data compared to formats such as Dolby Digital and
MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/CR)
is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video
(525p/480p), you can experience higher-density picture
than that in interlace (525i/480i).
Region Code
Digital Audio
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo (2ch) or
multi-channel audio.
Title
A collection of chapters on BD-video or DVD-video. See
also “Chapter”.
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel
surround sound output.
Track
Audio CD use tracks to divide up the content of a disc.
The BD-video or DVD-video equivalent is called a chapter.
See also “Chapter”.
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
A-B
Abkhazian
Code
Language
French [FRE]
Frisian
Code
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Language
Macedonian
Malagasy
Malay
Code
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
Language
Siswat
Slovak [SLO]
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
Code
6565
6557
6558
6561
5165
6567
6569
6568
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Afar
Galician
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian [BUL]
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR] 6061
Hungarian [HUN]
I-K
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
6149
6164
6159
6247
6265
5247
6258
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Irish [IRI]
Polish [POL]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Portuguese [POR] 6266
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
6367
6459
6461
6467
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Kirundi
Korean [KOR]
Kurdish
L-N
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Laothian
Latin
5861
5847
5868
5860
5866
Faroese
5261
5256
5255
Latvian;Lettish
Lingala
Fiji
Finnish [FIN]
Lithuanian
Note
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every
time you change the audio or subtitle language setting on page 29. If you choose any other languages, ‘---’ will be
displayed instead.
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
Media
BD-video, DVD-video, DVD+RW/+R, CD-DA, CD-RW/-R, DTS-CD
Power requirements
Power consumption
120V AC, 60Hz
30W (standby: 0.8W)
Dimensions (width x height x depth)
Weight
17.2 x 2.8 x 13.9 inches (435 x 70 x 351mm)
9.1 lbs. ( 4.1kg )
Operating temperature
Operating humidity
41°F (5°C) to 104°F (40°C)
Less than 80% (no condensation)
Terminals
Audio output (Analog)
RCA jack x 2
Video output
L/R: 2Vrms (output impedance: more than 1kΩ)
1Vp-p (75Ω)
RCA jack x 1
Component video output
RCA jack x 3
Y: 1Vp-p (75Ω)
PB/CB: 700mVp-p (75Ω)
PR/CR: 700mVp-p (75Ω)
Audio output (Digital)
RCA jack x 1
500mVp-p (75Ω)
HDMI output
HDMI jack x 1
Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio
Note
• The specifications and design of this product are subject to change without notice.
EN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Certain parts are excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR
OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO
OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This limited warranty does not
apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during
normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs,
alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse,
abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or
other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL),
ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING
THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO
PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE
CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY
FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN
SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its
original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE
CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers
without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at:
FUNAI CORPORATION
Customer Service
Tel : 1-800-605-8610
19900 Van Ness Avenue, Torrance, CA 90501
E5E20UD / E5H20UD
Printed in China
1VMN25073 ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-ray Disc Player
1. Connections
Quick Start Guide
NB500MG9
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
All devices should be turned off and
disconnected from the power outlet,
when you make the connections.
Basic Connections
Playable Discs and Files
Make one of the following connections, depending on the capabilities of your existing device.
This unit is compatible to play back the following discs / files.
AUDIO CONNECTION
VIDEO CONNECTION
Playable discs
Logos
Playable files
Logos
Method 1
Method 2
Method 3
Blu-ray Disc
SD Memory Card (including
SDHC), miniSD Card,
microSD Card
TV
JPEG
- BD-video (single / double layer)
- BD-RE ver.2.1 (single / double layer)
(Recorded in BDMV format)
- BD-R (single / double layer)
(Recorded in BDMV format)
(Unclosed discs may not be played
back.)
DVI IN
COMPONENT
VIDEO IN
AUDIO IN
VIDEO
IN
R
L
Y
(Green)
Readable cards
Playable files / data
PB/CB
SD Memory Card (8MB - 2GB)
SDHC Memory Card (4GB)
miniSD Card (8MB - 2GB)
microSD Card (8MB - 2GB)
(Blue)
JPEG, picture-in-picture
commentary, subtitles or
other extras for BD-ROM
Profile 1 ver.1.1
PR/CR
(Red)
RCA
RCA component
video cable
RCA
HDMI-DVI
cable
DVD-video
video cable
audio cable
and
or
or
DVD+RW (single layer)
DVD+R (single / double layer)
CD-DA (audio CD)
CD-RW
(Green)
(Red)
• For miniSD Card and microSD Card, the adapter is necessary.
this unit
COMPONENT
VIDEO OUT
Y
P
R/CR
miniSD Card adapter
miniSD Card
(Blue)
VIDEO
OUT
P
B/CB
AUDIO OUT
VIDEO OUT
COMPONENT VIDEO OUT
HDMI OUT
OR
HDMI Connection
CD-R
microSD Card adapter
microSD Card
AUDIO/VIDEO CONNECTION
Method 4
this unit
Kodak Picture CD
DTS-CD
TV
“Blu-ray Disc“ and
are trademarks.
HDMI IN
is a trademark of DVD Format/Logo Licensing Corporation.
HDMI cable
Press [HDMI] to change the resolution of the video signal being output from HDMI OUT jack.
The video resolution changes as follows every time [HDMI] is pressed.
DVD-video
BD-video
Region Codes
480p
720p
1080i
1080p
1080p24
This unit has been designed to play back BD-video with region A and DVD-video with region
“1” or “ALL“.
You cannot play back BD-video or DVD-video that are labeled for other regions. Look for the
symbols on the right on your BD-video or DVD-video. If these region symbols do not appear
on your BD-video or DVD-video, you cannot play back the disc in this unit. The letter or
number inside the globe refers to region of the world. A BD-video or DVD-video labeled for a
specific region can only play back on the unit with the same region code.
Note :
• You cannot select the video resolutions which are not supported by the connected TV.
• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed HDMI
Cable is recommended) and select “1080p24” if the connected TV is compatible with 1080p24 frame input.
E5E20UD / E5H20UD
1VMN25074 / ★★★★★
Printed in China
Follow to the back side of this sheet.
EN
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Connections (cont'd)
2. Playback
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Connection to an Audio System
1
Press [ y STANDBY-ON]
Please purchase the rest of the necessary cables at your
local store.
2
Turn on the TV and select the
OPEN/
CLOSE
STANDBY-ON DISPLAY
HDMI
appropriate input on the TV to which
the unit is connected.
2-Channel Analog Audio Connection
stereo system
AUDIO IN
analog audio input jacks
audio
R
L
Press [OPEN / CLOSE A ] to open
3
SEARCH
CLEAR
A-B
the disc tray.
Place the disc on the disc tray with
4
RCA audio cable
its label side facing up.
this unit
OK
AUDIO
OUT
L
AUDIO
SUBTITLE
R
AUDIO OUT
MODE
Align the disc to the
disc tray guide.
Digital Audio Connection
AV receiver/amplifier
audio
DIGITAL AUDIO INPUT
COAXIAL
digital audio coaxial input jack
5
Press [OPEN / CLOSE A ] to close the
disc tray.
digital audio coaxial cable
It may take a while to load the disc.
Some discs may start playback automatically.
this unit
6
Press [PLAY B] to start playback.
For many of BD-video and DVD-video, a menu screen
may appear.
DIGITAL OUT (COAXIAL)
In this case, use [K / L / s / B] to select the desired
item, then press [OK].
Supplied cables used in this connection are as follows:
• AC cord x 1
Connecting the AC Cord
To pause playback:
Press [PAUSE F ].
To return to normal playback:
Press [PLAY B ].
After you made all necessary connections, connect the AC cord to the AC IN.
Then connect the AC cord to the AC outlet.
To stop playback:
Press [STOP C ].
Insert the plugs securely. Incomplete connections will result in the generation of noise.
To eject the disc:
Press [OPEN / CLOSE A ] to open the disc tray, then
remove the disc before turning off the unit.
this unit
AC outlet
AC 120V, 60 Hz
AC cord
EN
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|