Using Your Picture Frame
How to Setup the Alarm:
Slideshow Effect - You can select different photo transition
effects in slideshow mode: ALL, 3D Flip, 3D Circle, 3D
Float, 3D cube, Shutter, Boxing Shutter, Cross Comb, Insert,
News, Plugs Sign, Flabellate, Fade, Shrink.
BACK PANEL
•
Press the Set key to adjust the hour first, the hour indicator
will flash.
•
•
•
•
Press the Standby/on key on the front panel to turn on the
unit, the start up screen will be displayed for a few seconds.
For Customer Assistance Call:
1-800-663-5954
5
4
1
3
2
•
•
Press the Up or Down key to adjust the hour.
If no Card or USB drive is inserted, the Picture Frame will
play the pre-installed photos automatically.
Press the Set key again to set the minute, the minute
indicator will flash.
07MF121
If a Memory Card or USB is inserted, the Digital Photo Frame
will read the photos and display them in Slide Show.
Slideshow Interval - You can select the display time internal
of each photo in slideshow mode: 3 seconds, 10 seconds,
1 minute, 2 hours.
Up or Down key to adjust the minute.
Press
•
•
7” Digital Photo Frame
Press the Set key to exit setup mode and save the setting.
The Alarm function will turn ON.
If both Card and USB drive are inserted, the selection
screen will be displayed. Press Left/Up and Right/Down
Color - You can adjust the display Brightness, Contrast,
Saturation and Hue level of the Digital Photo Frame.
Remark:
Play/
to select the device you want to play, then press
Pause/Enter to confirm and go to Slide Show.
Under alarm mode or setup mode, if no key is pressed after 30
seconds, the unit will exit setup mode and go back to clock
mode automatically. The final setting will be saved.
•
Press Left/Up and Right/Down to adjust the level, then
press Play/Pause/Enter to save or exit, or to discard.
Instruction Manual
OSD language - You can select the OSD language of the
Digital Photo Frame: English, French, Spanish, Italian, Dutch,
German, and Portuguese.
When the Alarm is ON
SD
MMC
MS
•
•
•
When the time reaches the alarm setting, the speaker inside
the Digital Picture Frame will alarm for 1 minute.
Reset Setting - Reset the Digital Photo Frame to default settings.
Firmware Version - Show the Firmware Version of the Digital
Photo Frame.
Up/Down/Set/Mode key to turn the Alarm
Press either the
OFF.
6
8
9
10 11
7
Press the Snooze key to turn off the alarm temporarily. It
will turn on and sound off the alarm again 3 times every
5 minutes for 1 minute.
USB
Digital Photo Frame Display Functional keys
MS
Remark: This Digital Photo Frame supports photos in JPEG
USB
Setup in Full Screen Playback Mode
1. Play/Pause/Enter - 1) Press to play or pause photo
playback and slide show playback 2) Confirm selection in
setup mode.
Below options can be selected in the setup menu:
Properties - View the photo information: Camera model,Aperture
size, ISO Value and photo taken date, press EXIT to exit.
Save as logo – Save the current playback photo as the
startup screen.
Remark: The Snooze function will cancel if the following occur:
1. The time or alarm setting is changed.
2. After it has sounded 3 times.
format, pictures with other formats may not able to be loaded or
displayed correctly.
Thank you for your purchase of this Magnasonic product. Please read this Instruction Manual carefully
before using product to ensure proper use. Keep this manual in a safe place for future reference.
2. Left/Up - 1) Press to select the left photo during photo
playback 2) Select the upper item in setup mode.
3. Right/Down - 1) Press to select the right photo during
photo playback 2) Select the lower item in setup mode.
COUNT DOWN MODE
PHOTOS PLAYBACK
Slide Show Playback Mode
Delete - Delete the current playback photo from the Card or
USB drive.
Under Alarm mode, press the Mode key to enter Count Down
4. Exit- Press to exit setup mode.
Mode.
The Digital Photo Frame will play the photos automatically.
5. Setup - Press to enter setup mode during thumbnail
mode and full screen playback mode.
Zoom - Enlarge the playback photo. Press PLAY/PAUSE/
ENTER continuously to select the zooming step, press
EXIT to exit zooming mode.
•
•
Servicing
SAFETY
•
Press the Play/Pause/Enter key to pause the slide show
playback, press again to resume.
Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
•
Press the Exit key to return to Thumbnail mode.
Clock/Date/Temperature Display Functional key
Remark: You cannot select the previous or next photo in
zooming mode, please press EXIT to quit first.
Rotate - Rotate the playback photo clockwise.
Press PLAY/PAUSE/ENTER continuously to rotate the photo
90 degree per press. Press EXIT to exit rotating mode.
Remark: You cannot select the previous or next photo in
rotating mode, please press EXIT to quit first.
Exit - Exit the setup menu.
Hour
Minute
CAUTION
6. Clock battery - Used to keep the clocks time
Full Screen Playback Mode
RISK OF ELECTRIC SHOCK
DO NOT OPEN
How to Set the Count Down Timer
7. Mode - Press to select a mode among Clock, Alarm and
Count Down mode.
Replacement Parts
The Digital Photo Frame will display the selected photo at full size
•
•
•
•
•
Press the Set key to adjust the hour first, the hour indicator
will flash.
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
•
Press Left/Up or Right/Down to play the previous or next
photos.
Play/Pause/Enter key once to start Slideshow
8. Up - Press to select up in various menu options
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
persons.
Press the Up or Down key to adjust the hour (You can set
the range between 0 to 23 hours).
9. Down - Press to select down in various menu options
•
Press the
10. Set- Press to adjust the difference options in Time, Alarm
and Count Down modes.
playback, “Play” will be displayed on screen for a few
seconds. Press the Play/Pause/Enter key again to pause
the slide show, “Pause” will be displayed on screen for
a few seconds.
Press the Set key again to set the minute, the minute
indicator will flash.
11. Snooze- Press to enable the Snooze function.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
this Digital Photo Frame.
Press Up or Down to adjust the minute (You can set the
range between 0 to 59 minutes).
•
•
Safety Check
SD
CLOCK/DATE/TEMPERATURE DISPLAY FUNCTION
MMC
•
•
Press the Exit key to return to Thumbnail mode.
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
GETTING STARTED
Installing the Stand
Finally press Set to exit setup mode and save the setting.
Press the Setup key to enter Setup mode.
There are 3 modes in the Clock/Date/Temperature display.
Remark: Under Timer mode or setup mode, if no key is pressed
after 30 seconds, the unit will exit setup mode and go back to
clock mode automatically. The final setting will be saved.
WARNINGS:
Press the Mode key to exchange below modes:
•
Insert the detachable stand into the insertable hole on the
back panel.
Thumbnail Mode
To reduce the risk of fire or electric shock, do not expose this product
to rain or moisture.
•
•
•
Clock mode
The Digital Photo Frame will show six images at one time on the
screen for easy image selection.
USA & Canada versions comply
with ETL requirements.
Alarm mode
•
Move the stand upward until it is fixed with the Photo Frame
DO NOT REMOVE COVER or OPEN THE CABINET.
Dangerous high voltages are present inside the enclosure. No user
serviceable parts inside. Refer servicing to qualified personnel only.
Count Down mode
Remark: To avoid damage, please don’t pick up the Digital
Photo Frame by holding the stand only, please use two hands to
hold the Digital Photo Frame.
twice to
Press the Up key once to start the count down, press
UP
Resolution of
selected photo
Current position
of thunbnail
Playback
source
File name of
hold the count down and press again to resume. When the
remaining time reaches 0, the speaker inside the Picture Frame
will alarm for 1 minute. You can also press any key to turn off
the alarm. When the count down timer is set or counting is on
hold, pressing the Down key can cancel the timer setting, the
display will indicate 00:00. If no key is pressed after 30 seconds,
the unit will go back to clock mode automatically.
Clock Mode
PACKAGE
Use of controls, adjustments or performance of procedures other
than those specified may result in hazardous radiation exposure.
selected photo
The following is the default clock mode. The display shows
time, month (1-12), date, day (Mon - Sun), Week, Indoor
temperature information
Examine the contents of the box for your unit. There
should be the following:
1/2
SD/ MMC CARD
Filename : 0011small
CAUTION : RETAIN THIS MANUAL FOR FUTURE REFERENCE
This unit has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards
incorporated in this unit will protect you if you observe the following
procedures for installation, use, and servicing. This unit does not contain
any parts that can be repaired by the user.
Resolution:
268X178
•
•
•
•
•
Digital Picture Frame
PowerAdaptor
Day
Date
Temp
Month
Detachable Stand
Clock battery Lithium CR2025
User manual
PROBLEM
Note: Under no circumstances should you try to repair the unit
yourself as this will void the warranty. Only qualified
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
IDE
FRONT AND S
PANEL
service personnel can remove the cover or service this unit.
Hour
Minute
Time
Week
Follow all instructions.
•
•
•
•
Press Left/Up or Right/Down to select the photo you want
to display at full size.
Power Connection
NO POWER
Do not use this unit near water.
Clean only with a dry cloth.
•
•
•
Press the Up key to toggle between the 12-hour and
24-hour time display mode.
Press the Down key to toggle between Celsius ( o
Fahrenheit (oF) temperature display mode.
Press Play/Pause/Enter to view the photos at full screen
size.
Connect the supplied power adaptor from the Digital Photo Frame
to the power outlet.
•
Check if the power adapter is properly connected to the
AC power outlet.
Clean the screen only with a specified cleaning solution for use with
products such as laptops and computer monitors. These are available
at most retail consumer electronics stores. Do not clean the inside
of the unit.
C) or
Press Exit to return to the Card/USB selection menu if
both Card and USB drive are inserted.
•
Check if there is power at the AC outlet by plugging in
another appliance.
Inserting the Clock Battery (Lithium CR2025)
Press the Set key to enter the clock setup mode. The
corresponding indicator will flash during setup, then press
the UP and DOWN key to adjust the clock setting.
Press Setup to enter Setup mode.
•
•
Pull out the battery compartment. (Step 1)
•
•
•
•
•
Check that the power voltage stated on the power adaptor rating plate
corresponds to your local electricity supply.
NO PICTURE
Place the new battery (supplied) and fully insert the battery
compartment back to the original position.
SETUP
•
•
Check if the unit is switched on.
3
2
6
5
4
1
•
•
•
•
•
•
Press the Set key to set Hour first, then press the Up or
Down key to adjust the hour.
Do not block any ventilation openings. Install in accordance with the
manufacturer instructions.
When installing the battery, ensure to match the correct
polarity. (Steps 2 & 3)
Check if the photos stored on the Card or USB device
are in JPEG format.
You can enter the setup menu by pressing the Setup key
during Thumbnail mode and Full screen playback mode.
The setup menu will be shown, press the Left/up or Right/
down key to select the items you want to setup, then press
Play/Pause/Enter to confirm or press Exit to return.
1. Digital Photo Frame Display - Display the digital
photo from Memory Card or USB device.
Press the Set key again to set minute, then press the Up or
Down key to adjust the minute.
Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
•
Check if the memory card or USB device is inserted
correctly.
2. Clock/Date/Temperature Display - Display time,
date and indoor temperature information .
Up or
Press the Set key again to set the year, then press
Down to adjust the year between range 2000 to 2099.
Do not immerse the main unit, the power adapter or any accessories
in water or any other liquid.
FUNCTION DISTURBED
3. Standby/on - Press to toggle between operating
and standby mode.
•
The normal function of the unit may be disturbed by external
interference. Just reset the unit (disconnecting and
reconnecting the power cord might be required to resume
normal operation).
Press Set again to set Month, then press Up or Down to
adjust the month.
Remove the power adaptor from the outlet, when the product is unused
for a long period of time and during thunderstorms.
Setup at Thumbnail mode
4. USB jack - Plug the external USB devices into
this jack.
Below options can be selected in the setup menu:
Image Display - You can select the photo display type in this
option.
Press Set again to set the Date, then press Up or Down
to adjust the Date.
•
•
•
•
Only use attachments / accessories specified by the manufacturer.
Unwind and straighten the adaptor cord before use.
Place the product on a firm and level surface.
Damage Requiring Service
3
5. Card socket - Insert the SD/MMC/MS card into
this jack.
Finally press Set to exit setup mode.
1
2
•
Stretch - The photos will be displayed at full screen size
with horizontal ratio adjustment to fit the screen.
Remark:
6. DC in - Connect with the power adaptor.
•
Under setup mode, if no key is pressed after 30 seconds,
the unit will exit setup mode automatically. The final setting
will be saved.
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
CAUTION:
•
Crop - The photos will be displayed base on horizontal ratio
and extra vertical parts will be cropped.
Original - The photos will be displayed base on their
original ratio.
•
Remove the battery if it is exhausted, or if the Digital Photo
A)
When the power adapter is damaged.
Frame is not being used for an extended period of time.
Batteries contain chemical substances, so they should be
disposed of properly.
•
•
In order to get an accurate temperature measurement,
please avoid placing the Digital Photo Frame near heat
or cold sources like heaters and air conditioner.
B) If liquid has been spilled or objects have fallen into the product.
•
C) If the product has been exposed to rain, water, or other liquids.
D) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions. Improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
•
There is a risk of dangerous explosion of the battery is
replaced incorrectly, or with a wrong type. Use only the
same type of battery or an equivalent.
Alarm mode
Under clock mode, press Mode to enter Alarm mode.
Remarks:
The clock battery is used to maintain the clocks current time/date.
The battery has an approximate life of 10 months to 1 year
(depending on the brand and quality of the battery).
E) If the product has been dropped or damaged in any way.
F) When the product exhibits a distinct change in performance. It
indicates a need for service.
Hour Minute
Download from Www.Somanuals.com. All Manuals Search And Download.
|