®
Operation
and Installation
Manual
SPK
FM
ST
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
3-Beam Laser Pickup
RESET AUX HEADPHONES
®
RV4000
AM/ FM Stereo
Multi-Media Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Locations and Functions
1
2
3
4
5
SPK
FM
ST
PUSH
SPEAKER
27
25
23
21
EQ
1
2
3
4
5
6
26
24
22
20
18
16
A
B
6
7
9
AS/PS
SLP
AUX
AM/FM
DISC
8
10
11
ALM
DISP
DIM
12
13
19
17
3-Beam Laser Pickup
RESET AUX HEADPHONES
®
15 14
1. Power On/Off: Press to turn the unit on or off.
2. Disc Door: To play a disc, insert the disc with label facing forward.
3. Disc Door Release: Press to open the door so the disc can be inserted.
4. Auxiliary Button (AUX): Press to choose auxiliary audio in mode.
5. Display Area: This area displays all function information for the radio, clock, disc player and auxiliary
input device.
6. Mute Button: Press to mute the audio, press again to restore the audio.
7. Speaker Selection Buttons: Press to switch the speakers sets A and B on and off.
8. Disc Button: Press to select the music player mode.
9. Radio Button (AM/FM): Press to select the radio mode. Sequential presses will select radio band:
FM 1, FM 2, FM 3, AM 1 and AM 2.
�
10. Play/Pause Button ( ll): Press to pause disc play, press again to resume play.
��
��
), Seek Up (
11. Seek Down (l
l) Buttons:
Radio Mode: Press to tune the radio to a lower or higher radio station.
Disc Mode: Press to search for the beginning or next track.
12. Volume and Select Button: Rotate to increase or decrease the volume level. Press to select the sound
controls: Bass, Treble and Balance.
13. Headphone Socket: Accepts 3.5mm stereo headphone jacks.
14. Audio Input Jack: Press the AUX button until “Audio” appears in the display then plug in a device via
the 3.5mm audio input socket.
Note: The RV4000 does not control the device, it just allows the audio to be played through the system.
15. Reset Button: Press to reset the unit to it’s default settings.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Locations and Functions (Continued)
16. Dimmer Button (DIM): Press to dim the lighting in the display area. Sequential presses will select dif-
ferent levels of display area lighting.
17. Radio Preset Button (6): Recalls a memorized radio station, and programs a radio station into
memory.
18. Display Button (DISP): Press to toggle through the available display information.
19. Radio Preset Button (5): Recalls a memorized radio station, and programs a radio station into
memory.
20. Alarm Button: Sets the alarm. (See “Alarm Operation” for more details).
21. Radio Preset Button (4): Recalls a memorized radio station, and programs a radio station into
memory.
22. Sleep Button: Sets the sleep timer. (See “Sleep Timer Operation” for more details).
23. Radio Preset Button (3): Recalls a memorized radio station, and programs a radio station into
memory.
24. Radio AS/PS Button: Automatic radio station memory storing (AS) and Preset radio station scanning
(PS). (See “AM/FM Operation” for more details).
25. Radio Preset Button (2): Recalls a memorized radio station, and programs a radio station into
memory.
26. EQ/LOUD Button (Equalizer and Loudness): Press to select between the preset sound equalization
settings. Press and hold the button to boost high and low tones at low volume levels (loudness).
27. Radio Preset Button (1): Recalls a memorized radio station, and programs a radio station into
memory.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operations
Power On/Off:
Press the POWER button to turn the unit On/Off.
SPK
FM
ST
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Selecting a Play Source:
To select a play source, press one of the follow-
ing mode buttons:
SPK
FM
ST
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
AUX (Auxiliary Audio Input),
AM/FM (AM or FM Radio Band) or
DISC (Music)
ALM
DISP
DIM
RESET AV HEADPHONES
Dimming the Display:
Press the DIM button to select the desired level
of brightness for the display area.
SPK
FM
ST
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Display Selection:
Press the DISP button to display the clock.
Press again to return to previous display.
SPK
FM
ST
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
Press and hold to perform clock setting functions
(See “Setting the Clock” for more details).
ALM
DISP
DIM
RESET AV HEADPHONES
Sound Controls
Volume:
SPK A+B
FM
Increase the volume by rotating the VOLUME
knob clockwise. Decrease the volume by rotating
the VOLUME knob counterclockwise.
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
V
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Controls
Bass, Treble and Balance Control
Select the desired sound mode by pressing the VOLUME knob. The modes will be displayed in the fol-
lowing order: Bass, Treble, Balance and Volume.
Bass:
PUSH
SPEAKER
Select the Bass mode by pressing the VOLUME
EQ
1
A
B
knob. Increase the Bass by rotating the VOLUME
knob clockwise. Decrease the Bass by rotating the
knob counterclockwise. After 6 seconds control
reverts back to volume control.
AS/PS
SLP
AUX
AM/FM
DISC
2
3
4
5
6
ALM
DISP
DIM
RESET AV HEADPHONES
Treble:
PUSH
SPEAKER
B
Select the Treble mode by pressing the VOLUME
knob. Increase the Treble by rotating the VOLUME
knob clockwise. Decrease the Treble by rotating
the knob counterclockwise. After 6 seconds con-
trol reverts back to volume control.
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Balance:
PUSH
SPEAKER
Select the Balance mode by pressing the VOLUME
knob. Adjust the Balance by rotating the knob.
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
-
r
L = Equal sound right and left
-
r 7 = Right speaker only
L 7 = Left speaker only
ALM
DISP
DIM
After 6 seconds control reverts back to volume
control.
RESET AV HEADPHONES
Equalizer (EQ):
PUSH
SPEAKER
B
Press the EQ button to choose between the
preset equalizer settings: Flat, Classic, Rock, Pop
and Jazz as indicated in the display area.
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Loud:
PUSH
SPEAKER
B
To boost high and low tones at low volume
levels, press and hold the EQ button until “LOUd
On” appears in the display. To deselect, press
and hold the EQ button again until “LOUd OFF”
appears in the display.
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
Hold
ALM
DISP
DIM
RESET AV HEADPHONES
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Controls (Continued)
Mute:
Press the
Press the
PUSH
button to mute the volume level.
button again to restore the volume.
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Speaker Selection
Selecting Speaker Sets:
SPK
A
FM
ST
• Press the A button to toggle speaker set A on
and off. “SPK A” appears in the display when
speaker set A is on.
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
/FM
DISC
• Press the B button to toggle speaker set B on
and off. “SPK B” appears in the display when
speaker set B is on.
ALM
DISP
DIM
RESET AV HEADPHONES
Note: When “SPK A+B” appears in the display both
speaker sets A and B are on. When nothing appears
in the displaying both speaker sets are off
.
Setting the Clock
1. Press the DISP button until the clock appears in
the display.
PM
PUSH
SPEAKER
EQ
1
A
B
AS/PS
SLP
AUX
AM/FM
DISC
2
3
4
5
6
ALM
DISP
DIM
RESET AV HEADPHONES
2. Press and hold the DISP button until the hours
PM
number starts flashing.
PUSH
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
O
ALM
DISP
DIM
RESET AV HEADPHONES
Hold
3. Rotate the VOLUME knob until the correct Hour
appears in the display.
Note: When setting the clock make sure to
select the correct AM or PM indicator.
PM
PUSH
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
V H
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock (Continued)
4. Press the VOLUME knob and the Minute indica-
PM
tors will start flashing.
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
5. Rotate the VOLUME knob until the correct
Minutes appears in the display. Wait 5 seconds
and the colon between the hours and the min-
utes will start flashing indicating the clock is set.
PM
PUSH
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
V H
Sleep Timer Operation
Setting the Sleep Timer:
1. Press the SLP button until the “SLP 10”
appears in the display.
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
2. Keep pressing the SLP button again until the
desired sleep time appears in the display (00,
10, 20, 30, 40, 50, 60, 70, 80 minutes).
ALM
DISP
DIM
RESET AV HEADPHONES
3. Wait 5 seconds and the display will return to
normal operation and “SLP” will appear in the
display.
4. After the designated sleep timer has expired
the unit will turn off automatically
.
Cancelling the Sleep Timer:
1. Press the SLP button until “00” is displayed.
2. Wait 5 seconds and the display will return to
normal operation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm Operation
Setting the Alarm Timer:
1. Press the ALM button and the clock will
appear in the display with the hour number
flashing.
PM
PUSH
PUSH
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
2. Rotate the VOLUME knob until the correct
Hour appears in the display. “ALM” will
appear in the display indicating the alarm is
activated.
PM
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
Note 1: When setting the alarm clock make
sure to select the correct AM or PM indicator.
Note 2: When setting the alarm DO NOT use
12:00 AM, because that time is used to cancel
the alarm.
ALM
DISP
DIM
V H
PM
3. Press the VOLUME knob and the minute indi-
cators will start flashing.
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
PM
PUSH
4. Rotate the VOLUME knob until the correct
minutes appears in the display. Wait 5 seconds
and the colon between the hours and the
minutes will start flashing. The letter “ALM”
will appear in the display indicating the alarm
is set.
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
V H
ALM
5. Press the POWER button to turn the unit off.
The unit will automatically turn on when the
set alarm time is reached.
PUSH
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Cancelling the Alarm Timer:
Follow the procedures above except set the alarm
time to 12:00 AM. When the display exits alarm
timer programming the “ALM” will disappear
from the display indicating the alarm has been
cancelled.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operations
Selecting the Play Source:
SPK
A
ST
PUSH
Press the AM/FM button and “rAdIO” appears in
the display. After a brief moment either AM or
FM will appear in the display.
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
Selecting the AM or FM:
Press the AM/FM button repeatedly and select
from FM 1, FM 2, FM 3, AM 1 or AM 2.
RESET AV HEADPHONES
Band Indicator
FM Stereo Indicator
FM
ST
SPK A
Preset Band Preset Button
Group Number
Radio
Frequency
Seek Tuning in a Radio Station:
SPK
A
ST
��
PUSH
Press and release the l
button to tune in a
SPEAKER
EQ
1
2
3
4
5
6
A
B
��
lower radio station. Press and release the
button to tune in a higher radio station.
l
AS/PS
SLP
AUX
AM/FM
DISC
Note: The unit will automatically switch from
ALM
DISP
DIM
FM Mono to FM Stereo when the signal strength
increases to a stereo level. If the stereo signal
should become weak, the unit will switch back
to Mono. FM stereo reception is indicated when
“ST” appears in the display.
RESET AV HEADPHONES
Manual Tuning in a Radio Station:
SPK
A
ST
��
Press and hold the l
button to manually tune
PUSH
SPEAKER
EQ
1
A
B
in a lower radio frequency. Press and hold the
AS/PS
SLP
2
3
4
5
6
AUX
AM/FM
DISC
��
l button to manually tune in a higher radio
frequency.
ALM
DISP
DIM
Hold
RESET AV HEADPHONES
Memorizing Radio Stations:
SPK
A
ST
PUSH
SPEAKER
1. Press the AM/FM button to select either the
FM 1, FM 2, FM 3, AM 1 or AM 2 radio band.
2. Tune-in the desired radio station.
3. To memorize the station press and hold any-
one of the six radio station recall buttons until
the preset number appears.
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation (Continued)
Automatically Store Radio Stations:
1. Press the AM/FM button to select either the
FM or AM radio band.
2. Press and hold the AS/PS button then release.
The tuner will search for the strongest sta-
tions and store them into memory. The new
stations will replace stations that were previ-
ously stored in the current band.
SPK
A
ST
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
Hold
RESET AV HEADPHONES
Note: When the FM band is selected the 18 stron-
gest stations will be stored. When AM band is
selected the 12 strongest stations will be stored.
Scanning Stored Radio Stations:
1. Press the AM/FM button to select either the
FM or AM radio band.
2. Press the AS/PS button then release. The
tuner scans for preset stations stored in
the current band and pauses for 6 seconds
at each station. When a desired station is
reached, press the AS/PS button again to stop
scanning.
SPK
A
ST
PUSH
SPEAKER
EQ
1
A
B
AS/PS
SLP
AUX
AM/FM
DISC
2
3
4
5
6
ALM
DISP
DIM
RESET AV HEADPHONES
Disc Warnings
Handling and Cleaning:
•
Dirt, dust, scratches and warping disc will cause
non operation.
Label side up
• Do not place stickers on disc or scratch disc.
• Do not warp discs.
•
A disc should always be kept in its case when not
in use to prevent damage.
Do not touch
the underside
of the disc
• Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3. Near car heaters.
Do not bend
4. Car seats or dashboard.
Disc Cleaning:
Use a dry soft cloth to wipe disc the surface. If the
disc is quite dirty, use a soft cloth slightly moist
with isopropyl (rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional record
cleaners as they may mar the surface of the disc.
Wipe the disc from
the center toward
the outside edge
Note: A disc may become somewhat scratched
(although not enough to make it unusable)
depending on handling and conditions in the
usage environment.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc Operation
SPK
A
ST
General Operations:
PUSH
SPEAKER
1. Push the door access the disc player.
EQ
1
2
3
4
5
6
B
AS/PS
SLP
FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
2. Insert the disc onto the hub with the
label facing forward. Use your thumb to
make sure the disc snaps onto the hub.
3. Press the DISC button and “LOAd” will
appear in the display. The disc will auto-
matically start playing.
PUSH
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Track Number
Music Track Selection:
��
Press the l
button to select a lower track.
PUSH
��
Press the
l button to select a higher track.
SPEAKER
EQ
1
A
B
The track number will appear in the display.
AS/PS
SLP
AUX
AM/FM
DISC
2
3
4
5
6
ALM
DISP
DIM
RESET AV HEADPHONES
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc Operation (Continued)
Pausing the Disc:
PUSH
�
Press the ll button to pause the disc, press it
SPEAKER
EQ
1
2
3
4
5
6
A
B
again to resume play.
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Removing the Disc:
1. Push the door to access the disc player.
Wait until the disc stops spinning before
opening up the door.
2. Use your finger to remove the disc from
the hub.
3. Close the door.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Disc Operation
General Operations:
1. Push the door access the disc player.
SPK
A
ST
PUSH
SPEAKER
EQ
1
2
3
4
5
6
B
AS/PS
SLP
FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
2. Insert the disc onto the hub with the
label facing forward. Use your thumb to
make sure the disc snaps onto the hub.
3. Press the DISC button and “LOAd” will
appear in the display. The disc will auto-
matically start playing.
PUSH
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Disc File Selection:
File Number
��
Press the l
button to select a lower file.
��
Press the
l button to select a higher file.
PUSH
SPEAKER
EQ
1
The file number will appear in the display.
A
B
AS/PS
SLP
AUX
AM/FM
DISC
2
3
4
5
6
ALM
DISP
DIM
RESET AV HEADPHONES
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Disc Operation (Continued)
Pausing the Disc:
PUSH
�
Press the ll button to pause the disc, press it
SPEAKER
EQ
1
2
3
4
5
6
A
B
again to resume play.
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Removing the Disc:
1. Push the door to access the disc player.
Wait until the disc stops spinning before
opening up the door.
2. Use your finger to remove the disc from
the hub.
3. Close the door.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Input
Selecting the Audio Input Source:
PUSH
SPEAKER
Note 1: The RV4000 does not control the device,
it just allows the audio to be played through the
system.
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
Note 2: If the rear audio input is being used once
you plug a device into the front audio input jack
the audio will be diverted to playing the front
device. If the front audio jack is being used you
will not be able to select the rear audio input.
ALM
DISP
DIM
RESET AUX HEADPHONES
Front Audio Input:
Insert the 3.5mm jack from the audio device
into the AUX input socket on the front of the
housing. Press the AUX button until “Audio”
appears in the display. Refer to the audio
device’s owner’s manual for proper operation.
Rear Audio Input:
To select the rear input Audio play source,
press the AUX button until “Audio” appears in
the display. Refer to the audio device’s owners
manual for proper operation.
Headphone Output
Plugging in Headphone:
Insert a 3.5mm headphone jack into the
Headphone Output socket. Use the volume knob
on the headphone to adjust the audio level.
PUSH
SPEAKER
B
EQ
1
2
3
4
5
6
A
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
Note: To make it so the sound only can be heard
through the headphones press speaker buttons
A and B until neither “SPK A” or “SPK B” appears
RESET AV HEADPHONES
in the display
.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset Button
The LCD display may fail to function normally
due to the vehicle’s battery condition, and could
require resetting the radio microprocessor if:
• The vehicle has been “jump started” from a
dead battery condition.
• The vehicle battery becomes very low and is
quick-charged.
• The vehicle battery is removed and replaced.
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
ALM
DISP
DIM
RESET AV HEADPHONES
Should any of these conditions occur, simply
press and release the RESET button on the radio
front panel using the tip of a ball point pen. This
will reset the radio microprocessor to the origi-
nal factory settings. After pressing the RESET
button you should recheck to see if the radio
functions normally.
Reset Button
Additional Feature
Area Radio Frequency Adjustment:
Note: If operating the unit in the USA do not
change the area.
PUSH
SPEAKER
EQ
1
2
3
4
5
6
A
B
AS/PS
SLP
AUX
AM/FM
DISC
To Change the Area:
1. Press the AM/FM button and “rAdIO” appears
in the display.
ALM
DISP
DIM
RESET AV HEADPHONES
2. Press and hold the VOL/TONE knob until
“SEtUP” appears in the display
.
�
3. Press the ll button and “US” or “OCEAn”
will be displayed
.
��
��
4. Press the
l
or
l
button to change the
setting to “US” or “OCEAn”
.
�
5. Press the ll button to save the setting. The
unit will clear all the station settings. After wait-
ing a few seconds the unit exit programming.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
93
”
8
/
Wall
Panel
1
4
/ ”
6
Chassis Opening
Structural Stud
Caution: Do not install radio without rear cover installed:
No user-serviceable parts inside. Rear cover provides
protection against potential fire hazard.
Trim Ring
5
8
”
/
4
93
4
”
/
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Connections
Left
Speaker B
Right
Speaker B
_
_
+
White/Black Wire (Common -)
+
Gray Wire
Gray/Black Wire
Left
Speaker A
Right
Speaker A
+
_
+
Brown Wire
Brown/Black Wire
_
White Wire (Common -)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring and Auxiliary Connections
External Automotive
Type Antenna
(Optional)
Red Wire (+) to 12 Volt DC Power
Black Wire Ground
Audio In
Audio Out
10A Fuse
Music Disc Player
(Optional)
In-Dash Unit
(Optional)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
•
Read Instructions: All the safety and operating instructions should be read before the appliance is operated.
• Retain Instructions: The safety and operating instructions should be retained for future reference.
• Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.
• Follow Instructions: All operating and use instructions should be followed.
• Water and Moisture: The appliance should not be used near water. For example, near a bathtub, wash-
bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.
• Wall or Cabinet Mounting: The appliance should be mounted to a wall or cabinet only recommended by
the manufacturer.
• Heat: The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
• Power Supply: The appliance should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
• Power Lines: An outdoor antenna should be located away from power lines.
• Object and Liquid Entry: Care should be taken so that objects do not fall, and liquids are not spilled into
the enclosure through openings.
Outdoor Antenna Grounding:
If an outside antenna is connected to the receiver, be sure the antenna system is grounded, so as to
provide some protection against voltage surges and built up static charges. Section 810 of the National
Electrical Code, ANSI/NFPS No. 70-1983, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See illustration below.
Example of Antenna Grounding as per
National Electrical Code. Instructions
Contained in Article 810-"Radio and
Television Equipment"
Antenna Lead-In
Wire (B)
Mast
Ground
Clamp
Antenna Discharge Unit (C)
To Receiver
Ground Wire
(A,B )
Grounding
Clamps
Grounding Electrode
Driven 8’ Into the Earth
2.44 Meters
A. Use No. 10 AWG (5.3mm2) copper, No. 8 AWG (8.4mm2) aluminum, No. 17 AWG (1.0mm2) copper clad steel or
bronze wire, or larger as ground wire.
B. Secure antenna lead-in and ground wires to house with stand-off insulators spaced from 4 feet (1.22m) to 6 feet
(1.83m) apart.
C. Mount antenna discharge unit as close as possible to where lead-in enters house.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
ONE (1) YEAR LIMITED WARRANTY
Magnadyne Corporation or its authorized agents will within one year from the date of sale
to you, repair, replace or refund the retail sales price of said product or any part thereof, at
the option of the Magnadyne Corporation or its authorized agents, if said product or part
is found defective in materials or workmanship, when properly connected and operating
on the correct power requirements designated for the specific product. This warranty and
Magnadyne Corporation or its authorized agent’s obligations hereunder do not apply where
the product was; damaged while in the possession of the consumer, subjected to unrea-
sonable or unintended use, not reasonably maintained, utilized in commercial or industrial
operations, or serviced by anyone other than Magnadyne Corporation or its authorized
agents, or where the warning seal on the product is broken or the power and/or plugs
are detached from the unit. Magnadyne Corporation or any of its authorized agents will
not assume any labor costs for the removal and reinstallation of any product found to be
defective, or the cost of transportation to Magnadyne Corporation or its authorized agents.
Such cost are the sole responsibility of the purchaser.
This warranty does not cover the cabinet appearance items or accessories used in con-
nection with this product, or any damage to recording or recording tape, or any damage
to the products resulting from improper installation, alteration, accident, misuse, abuse or
acts of nature.
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO
ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE
ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN
EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND
ONE YEAR FROM THE DATE OF SALE.
This warranty extends only to the original purchaser of the product and is not
transferable. Some states do not allow limitations on how long an implied warranty lasts,
and some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may have other rights that vary from state to state.
“NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the User’s
authority to operate the equipment.”
Defective merchandise should be returned to the original point of purchase or
secondly, to Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220.
Return Authorization must be obtained before sending, or merchandise may be refused.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
© Copyright 2011
Magnadyne Corporation
RV4000-UM
Rev. A 5-19-11
Download from Www.Somanuals.com. All Manuals Search And Download.
|