Operation
and Installation
Manual
BT-HFKP10
Bluetooth Wireless Hands Free Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installing the Battery:
+
Indicator
-
Indicator
1. Remove the battery cover from the speaker-
phone.
2. Insert the battery into the speaker phone pay-
ing particular attention to the - and + indica-
tors on the battery.
3. Reinstall the battery cover on the speaker-
phone.
Battery Cover
Charging the Speakerphone:
Insert the charger into a vehicle power outlet
and the charging plug into speakerphone’s
charging socket. Charge the battery fully before
using for the first time. Normal charging time is
approximately 3 hours. The LED indicator will
flash red when charging and will be off when
charging is completed. Remove the charger
from speakerphone and the vehicle power outlet
when charging is completed.
Notes:
1. Low power indication: The LED will flash red
every 3 seconds when the speakerphone is
running low on power. Charge the speaker-
phone immediately. If battery is not charged
the speakerphone will automatically shut off.
2. Charging indication may be delayed for a few
minutes if the speakerphone has not been
used for a long time or the battery is drained.
PLEASE READ PRIOR TO INSTALLATION
CAUTION: Majority of vehicles manufactured today include air bag systems that inflates with great force dur-
ing an accident. If necessary, contact the vehicle’s manufacturer for air bag information specific to the vehicle.
DO NOT place an object, including all components in the area over the air bag or in the air bag deployment
area. If the components are improperly installed, serious injury could occur during inflation of the air bag.
• Mount components securely to prevent shifting that could cause injury or interfere with the vehicle
being operated safely.
• This hands-free kit is intended for 12 Volt DC operation only.
Mounting Speakerphone:
Insert the mounting clip into the speaker phone.
The mounting clip can be inserted from the top
or bottom to accommodate different mounting
locations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Button and Feature Locations
1
2
3
4
5
6
7
8
1. Microphone
5. Charging Socket
6. Speaker
2. Volume Decrease Button
Press to decrease the speaker’s output.
7. LED Indicator
3. Volume Increase Button
Press to increase the speaker’s output.
8. MODE Button (Mute)
Press to mute the speakerphone.
4. Multi-Function Button
See Operation Instruction for more information.
Operation Instructions
Turning On/Off the Speakerphone
Turning On: When speakerphone is in off mode:
Press and hold the multi-function button for 3 seconds until you hear a short beep. The LED will flash
blue for 3 seconds.
Turning Off: When speakerphone is in standby mode:
Press and hold the multi-function button for 3 seconds until you hear a long beep. The LED will flash red.
IMPORTANT: Press the multi-function button each time you turn the speakerphone on to reconnect the
paring so that the connection with the speakerphone and paired mobile handset is resumed. For pair-
ing, please refer to procedures under “Pairing”.
Pairing to a Mobile Handset
Prior to using the speakerphone for the first time, you must pair it with a Bluetooth-enabled mobile hand-
set. The following steps describes pairing instruction for a typical Bluetooth-enabled mobile handset.
1. Place the speakerphone and mobile handset no more than 3 feet apart.
2. Ensure the speakerphone is in the OFF mode.
3. Press and hold the multi-function button for 6 seconds until you hear a long beep. The LED will
flash red and blue alternatively. It’s now ready for pairing.
4. Activate your mobile handset’s Bluetooth accessing function by referring to your mobile handset
user guide for details. Mean while, the handset will search for accessible Bluetooth devices.
5. Select “BT-HFKP10” from the list.
6. Enter the pre-programmed passkey “0000” and press “OK” to pair the speakerphone and the
handset. When pairing is completed, you may hear a long beep and LED will flash blue 3 times.
The speakerphone is in standby mode when LED flashes blue every 3 seconds.
7. Press “Return” to go back to your handset’s main menu. (For most of the mobile handset models,
a headset icon will be shown on the screen.) You should now be able to make and receive calls
through the speakerphone. Please place the mobile handset to the speakerphone no more than 30
feet. (Obstruction could cause shorter sensing distance.)
IMPORTANT: Under the pairing mode, if the pairing cannot be completed within 2 minutes, the
speakerphone’s LED will flash off and speakerphone will be in off mode. Please repeat step 3 to 7 to
pair the speakerphone and mobile handset again.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
Operation Instructions
Connection/Link to a Mobile Handset
After pairing is completed, speakerphone is always in standby mode. Before you place or answer a call,
if the headset ICON is not shown on phone screen, please follow the simple steps to activate the
Bluetooth connection/link through your handset or speakerphone until the headset ICON is on the screen.
1. On Handset: Select “BT-HFKP10” from the paired list on your handset screen.
2. On Speakerphone: Short press multi-function button and select “Accept” on handset screen to
accept connection.
IMPORTANT: Whenever Bluetooth connection/link is removed and you cannot see the headset ICON
on phone screen, for example: power off on speakerphone/mobile handset or out of 30 feet sensing
distance, please activate connection/link as suggested.
Disconnecting from the Mobile Handset
You may connect your speakerphone to another Bluetooth handset. Please follow the steps to discon-
nect the speakerphone with the pre-paired handset.
1. Power off the speakerphone.
2. Select “disconnecting” to remove previous connection from your handset list.
IMPORTANT: Once mobile handset and speakerphone had been disconnected, for example: when the
connecting range is over 30 feet or mobile headset is power off, the speakerphone will emits 2 short
beeps per minute and LED will flash blue per 3 seconds. If mobile headset enters connecting range 30
feet with speakerphone within 10 minutes, the speakerphone will activate connection automatically and it
is not necessary to push multi-function button for to reconnect. If mobile headset doesn’t enter connect-
ing range 30 feet with speakerphone within 10 minutes, the speakerphone will power off automatically.
Using the Speakerphone
Once pairing is completed and battery is fully charged, you may access the following functions. Some
of the below-mentioned functions are only accessible for handset's supported with Hands-Free Profile.
Answering a Call:
To answer a call, wait for the ringing tone from speakerphone, then quickly press the multi-function
button to accept the call or answer the call via your mobile handset in the normal way.
Ending a Call:
Short press the multi-function button, to end your call or end the call via your mobile handset in the
normal way. You will hear a short beep from the speaker.
Reject a Call:
When you hear the ringing tone, press and hold the multi-function button for 3 seconds until you
hear a short beep.
Voice Dialing:
If your mobile handset is voice dialing enabled, under standby mode, press the multi-function button
and when you hear a beep, say the voice tag.
IMPORTANT: Please make sure to record voice tag into the mobile handset before using voice dialing
function. This function is only applicable to mobile handset with Bluetooth Hands-Free Profile. Due
to variation of phones, you may not hear the beep. Please refer to your mobile handset user guide
for additional information.
Last Number Re-Dialing:
Under standby mode, quickly press multi-function button twice for last number redial.
Adjusting the Volume:
a. During a conversation press the
b. During a conversation press the
-
-
or + button repeatedly until you reach the desired volume level.
button for 2 seconds, the speaker will be changed to low vol-
ume mode for private talk. Meanwhile, the LED will flash blue.
c. During a conversation with low volume mode activated, press the + button for 2 seconds. The
speaker will restore normal speakerphone volume.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
Operation Instructions
Mute:
a. To mute the speakerphone, quickly press the “MODE” button. Meanwhile, the speakerphone will
beep 1 time every 15 seconds and the LED flashes red.
b. To un-mute the speakerphone, quickly press the “MODE” button.
Call Inter-Changing:
Speakerphone to Handset: During a conversation press and hold the + and
-
buttons simultaneous-
ly to switch operation from the speakerphone to the handset.
Handset to Speakerphone: Press the multi-function button to switch operation from the handset to
the speakerphone.
Restore to Default-Remove Previous Pairing & Connection
You may want to reset the speakerphone to its original settings and clear the previous pairing. Please
follow these simple steps.
1. Ensure the speakerphone is under standby mode.
2. Press and hold the volume + and
and red alternatively. Release the buttons.
3. Again, press and hold the + and buttons simultaneously for 2 seconds until speakerphone emits
-
buttons simultaneously for 10 seconds until LED flashes blue
-
2 short beeps. The speakerphone will be powered off and back to default setting.
4. After defaulting, if speakerphone is powered on again, the LED will flash red every 3 seconds and
speakerphone will emit 3 beeps every 1 minute. Then, the speakerphone will be powered off with-
in 2 minutes. The speakerphone will be back to normal when LED flashes blue every 3 seconds
after completion of pairing with Bluetooth devices.
LED Indication
Speakerphone Mode
Red LED
Blue LED
Sound
Off Mode
Power On
Power Off
Off
Off
Flashes every 3 seconds
Short Beep
Long Beep
On for 3 seconds
3 Beeps every
minutes
Standby - Before Pairing Flashes every 3 seconds
Standby - Low Voltage
Talking in Progress
Pairing in Progress
Pairing Completed
Mute
Flashes every 3 seconds
Flashes alternatively
Steady On
Flashes every 15 seconds
Flashes alternatively
Flashes every 3 seconds
Long Beep
Small Volume
Steady On
Off
Charging in Progress
Charging Completed
Steady On
Off
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
• Do not expose the speakerphone to liquid, moisture or humidity, as it is not waterproof.
• Do not use abrasive cleaning solvents to clean the speakerphone.
• Do not expose the speakerphone to high temperatures.
• Do not attempt to disassemble the speakerphone, as it does not contain serviceable components.
• If you do not use the speakerphone for long periods, be sure to store it in a dry place, free from extreme
temperature, humidity and dust.
• Only use the MobileVision supplied charger when charging the speakerphone.
• Only charge the speakerphone’s built-in battery in accordance with the instructions of this user guide.
• Avoid charging the speakerphone in extreme high or low temperatures.
Trouble Shooting
Ensure the speakerphone is paired with your mobile handset.
If you are unable to con-
Ensure your mobile handset's Bluetooth feature is activated.
nect your speakerphone
and mobile handset, try
the following:
Please refer to your mobile handset user guide for specific instructions.
Ensure the speakerphone is within a maximum of 30 feet of your mobile
handset(s) and there are no obstructions, such as walls or other
electrical devices in between as it may cause shorten or interfere
with transmission.
If all the above steps do not resolve your problem, remove the battery
for 10 minutes.
The Bluetooth speakerphone is compliant with and adopts the Bluetooth Specification V1.2. However,
interoperability between the device and other Bluetooth-enable products is not guaranteed because it
depends on compatibility. For more information on the compatibility between the device with other
Bluetooth-enabled products, please check with the manufacturer/importer.
Specifications
Bluetooth Specifications:
Version 1.2, Class 2, 10 Meters
Bluetooth Profile Supported: Headset & Hands-Free Profiles
Operating Frequency Band : 2.402 to 2.480GHz unlicensed ISM band
Rechargeable Li-ion Battery: 3.7V DC, 650mAH
Multi-Pairing:
DC Charger:
Up to 7 bluetooth devices
DC 5 v to 6 v, 400 mA, mini USB connector
3 hrs.(approx.)
Normal Charge Time:
Talk Time:
7 to 8 hrs.(approx.)
Standby Time:
Dimension(L/M/S):
Weight:
500 hrs.(approx.)
12.6 x 4.7 x 1.6cm.
80 g. with battery
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
ONE (1) YEAR LIMITED WARRANTY
Magnadyne Corporation or its authorized agents will within one year from the date of sale
to you, repair, replace or refund the retail sales price of said product or any part thereof, at
the option of the Magnadyne Corporation or its authorized agents, if said product or part
is found defective in materials or workmanship, when properly connected and operating on
the correct power requirements designated for the specific product. This warranty and
Magnadyne Corporation or its authorized agent’s obligations hereunder do not apply where
the product was; damaged while in the possession of the consumer, subjected to unrea-
sonable or unintended use, not reasonably maintained, utilized in commercial or industrial
operations, or serviced by anyone other than Magnadyne Corporation or its authorized
agents, or where the warning seal on the product is broken or the power and/or plugs are
detached from the unit. Magnadyne Corporation or any of its authorized agents will not
assume any labor costs for the removal and reinstallation of any product found to be defec-
tive, or the cost of transportation to Magnadyne Corporation or its authorized agents. Such
cost are the sole responsibility of the purchaser.
This warranty does not cover the cabinet appearance items or accessories used in con-
nection with this product, or any damage to recording or recording tape, or any damage to
the products resulting from improper installation, alteration, accident, misuse, abuse or
acts of nature.
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO
ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE
ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN
EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND
ONE YEAR FROM THE DATE OF SALE.
This warranty extends only to the original purchaser of the product and is not
transferable. Some states do not allow limitations on how long an implied warranty lasts,
and some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may have other rights that vary from state to state.
“NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the User’s
authority to operate the equipment.”
Defective merchandise should be returned to the original point of purchase or
secondly, to Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220.
Return Authorization must be obtained before sending, or merchandise may be refused.
BT-HFKP10-UM/IM
Rev. A 7-22-08
© Copyright 2008
Magnadyne Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|