Magellan GPS Receiver MAP 410 User Manual

User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

MAP 410 Manual Addendum

Your MAP 410 receiver has been pre-loaded with the

following DEMO regions:

MapSend Marine

s New York

s Annapolis

s Miami

MapSend Land

s Chicago

s Los Angeles

s Seattle

These areas have been installed as a sample of the addi-

tional detail available from the Magellan MapSend™ Marine

and Land CD-ROMs. The MapSend Marine CD-ROM

contains C-MAPNT Compact marine chart which displays

such detail as spot soundings, contour lines, navaids and

more. The MapSend Land CD-ROM provides additional

detail including major roads, nautical navaids and destination

Points of Interest such as golf courses and campgrounds.

Each of these CD-ROMs are available from your Magellan

dealer or you can order directly from Magellan by calling

(800) 669-4477.

You may turn OFF these DEMO regions by performing the

following steps:

1. While in the MAP screen

2. Press MENU

3. Select MAP SETUP

4. Press ENTER

5. Select UPLOADED DATA and press ENTER

6. Select OFF

When the DEMO regions are turned on, some

road detail in these regions may be hidden.

Turning OFF uploaded data will erase all routes

contained in your receiver’s memory.

630360 B

Download from Www.Somanuals.com. All Manuals Search And Download.

Ajout au guide de l’utilisateur du MAP 410

Votre récepteur MAP 410 contient des informations

géographiques sur les régions suivantes en guise de

démontration:

MapSend Marine (Marin)

s New York

MapSend Land (Terrestre)

s Chicago

s Annapolis

s Los Angeles

s Miami

s Seattle

Ces zones ont été inscrites en mémoire à des fins de

démonstration des informations topographiques additionnelles

disponibles sur le cédérom Magellan MapSend™ Marine and

Land(Marin et terrestre). Le cédérom MapSend Marine

contient des cartes C-MAPNT Compact marines si détaillées

qu’il est possible d’obtenir les contours marins, les aides à la

navigation et des autres. Le cédérom MapSend Land contient

des informations additionnelles incluant les routes principales,

les aides à la navigation et des lieux d’intérêts tels que terrains

de golf et des terrains de camping.

Ces cédéroms sont disponibles chez votre détaillant Magellan.

Il est également possible de les commander en apellant

Magellan au numéro sans frais suivant: (800) 669-4477.

Il es possible en suivant ces opérations, de mettre hors

fonction les zones de démonstration.

1. À partir du tableau des cartes

2. Appuyez sur Menu

3. Sélectionnez MAP SETUP (Menu de configuration)

4. Appuyez sur ENTER

5. Sélectionnez UPLOADED DATA et appuyez sur ENTER

6. Sélectionnez OFF

Lorsque les zones de démonstration sont en

fonction, certains détails des routes peuvent être

cachés.

La mise hors fonction des données téléchargées

entraîne l’effacement des itinéraires en mémoire

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

INTRODUCTION ................................................................................... 1

Packing List ....................................................................................... 1

Conventions Used In This Manual..................................................... 2

GETTING STARTED.............................................................................. 3

Receiver Description.......................................................................... 3

Receiver Accuracy ............................................................................. 3

Altimeter/Pressure Sensor ........................................................... 3

MAP 410 GPS Receiver..................................................................... 4

Keypad Description ........................................................................... 5

Battery Installation ............................................................................. 6

Using Your MAP 410 ......................................................................... 7

Proper Handling - Signal Reception .................................................. 7

Turning the Receiver “ON” & “OFF” ............................................... 7

First Time Use - Initializing the Receiver .......................................... 8

Input Location Information ......................................................... 8

Setting Local Time and Date ....................................................... 8

Selecting Primary Usage ............................................................. 9

Taking a Position Fix ................................................................... 9

Saving a Waypoint ..................................................................... 10

Creating a GOTO Route to your Saved Waypoint .................... 10

BASIC OPERATION ............................................................................ 11

Power Up Sequence ......................................................................... 11

NAV Screens .................................................................................... 11

The SAT STATUS Screen.......................................................... 11

Changing Temp Units and Calibration in the STATUS

SCREEN....................................................................... 12

Setting Temperature Calibration ......................................... 12

The POSITION Screen.............................................................. 13

Viewing Secondary Coordinate System from the POSITION

Screen ........................................................................... 13

Averaging in the POSITION Screen ................................... 13

The NAV 1 Screen ..................................................................... 14

Customizing the NAV 1 Screen .......................................... 14

The COMPASS Screen.............................................................. 15

Customizing the Compass Screen....................................... 16

The NAV 2 Screen ..................................................................... 16

Customizing the NAV 2 Screen .......................................... 16

The MAP Screen ....................................................................... 17

Download from Www.Somanuals.com. All Manuals Search And Download.

Cartography Legend............................................................ 17

Cartographic Shading ......................................................... 18

MAP Setup .......................................................................... 18

MAP Screen Orientation .............................................. 19

Course Projection ......................................................... 19

LAT/LON Grid ............................................................. 19

Map Text....................................................................... 20

Cities............................................................................. 20

Highways...................................................................... 20

Railroads....................................................................... 21

Enabling/Disabling Uploaded Data .............................. 21

Waypoints ..................................................................... 21

Data Window ...................................................................... 22

Setting Hide/Show Data ............................................... 22

Track History ...................................................................... 23

Clear Track.......................................................................... 23

Routes ................................................................................. 24

MAP Scale .......................................................................... 24

Map Find ............................................................................. 24

Panning Around the MAP ................................................... 24

Accessing WPTs from the MAP................................... 25

The ROAD Screen..................................................................... 25

Customizing the ROAD Screen .......................................... 26

Changing the Scale ............................................................. 26

The SPEED Screen.................................................................... 26

Resetting the Odometer....................................................... 27

Resetting the Trip Odometer ............................................... 27

Setting the Speed Average .................................................. 27

The TIME Screen ...................................................................... 27

Selecting TIME Format ...................................................... 28

NAV Screen Defaults................................................................. 28

Working with Waypoints (WPTs) .................................................... 29

The Waypoint Menu .................................................................. 29

Selecting a Waypoint Category ................................................. 29

User Waypoints ................................................................... 29

Non-User Waypoints ........................................................... 30

Saving a Waypoint (User Only)................................................. 30

Saving Your Position Fix with a Receiver-Generated Name ..

...................................................................................... 30

Saving Your Position Fix with a User-Created name ......... 30

Creating a Waypoint (User Only) .............................................. 30

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing a Waypoint (User Only) ................................................ 30

Selecting a Waypoint to Edit (User Only) .......................... 31

Editing Waypoint Fields (User Only) ................................. 31

Creating/Editing/Deleting a Message in a Waypoint (User

Only)............................................................................. 31

Saving Changes to the Selected Waypoint (User Only) ..... 32

Deleting a Waypoint (User Only) .............................................. 32

Projecting a Waypoint (User & Non-User) ............................... 32

Sorting a Waypoint (User & Non-User) .................................... 33

Finding a Waypoint (Non-User Only) ....................................... 33

Working with Routes ....................................................................... 34

The Route Menu ........................................................................ 34

Creating a GOTO Route ..................................................... 34

Creating a GOTO Route from the Map Screen .................. 34

Using FIND in a GOTO Route ........................................... 35

Clearing a GOTO Route ..................................................... 35

Creating a Man Over Board (MOB) Route ............................... 35

Clearing a MOB .................................................................. 35

Creating a Backtrack Route....................................................... 36

Creating a Multi-Leg Route ...................................................... 36

Viewing/Editing a Route ........................................................... 37

Inserting a Leg ........................................................................... 37

Changing a Waypoint in a Route ............................................... 37

Adding a Waypoint at the End of a Route ................................. 37

Deleting a Waypoint in a Route................................................. 38

Saving a Route........................................................................... 38

Activating/Deactivating a Route ............................................... 38

Reversing a Route ..................................................................... 39

Deleting a Route ........................................................................ 39

Using Map View in a Route ...................................................... 39

Working with TrackRoute ......................................................... 40

AUXILIARY FUNCTIONS................................................................... 41

Working with Sun/Moon and Fish/Hunt .......................................... 41

Simulate Mode ................................................................................. 42

Contrast ............................................................................................ 42

Alarms/Messages ............................................................................. 43

Accessing the Alarm/Message Menu ........................................ 43

Anchor Alarm ............................................................................ 43

Arrival Alarm ............................................................................ 43

Cross Track Error (XTE) Alarm ................................................ 44

Proximity Alarm ........................................................................ 44

Download from Www.Somanuals.com. All Manuals Search And Download.

GPS Alarm................................................................................. 45

Viewing the Alarm/MSG Menu................................................. 45

Re-setting Alarm Defaults ......................................................... 45

Clearing Alarm Messages.......................................................... 45

CUSTOMIZING YOUR MAP 410 ........................................................ 46

Setup ................................................................................................ 46

Initialization ..................................................................................... 46

Enabling/Disabling the NAV Screens .............................................. 46

Coordinate System ........................................................................... 47

Map Datum ...................................................................................... 47

Elevation Mode ................................................................................ 48

Time Format ..................................................................................... 48

Nav Units ......................................................................................... 48

Temperature Units ............................................................................ 49

North Reference ............................................................................... 49

Light Timer ...................................................................................... 49

Beeper .............................................................................................. 50

Personalize ....................................................................................... 50

Clearing Memory ............................................................................. 50

NMEA Setup .................................................................................... 51

Setting Baud Rate ............................................................................ 51

TROUBLESHOOTING......................................................................... 52

Commonly Asked Questions............................................................ 53

Contacting Magellan ........................................................................ 54

COORDINATE SYSTEMS ................................................................... 55

NMEA DATA MESSAGES ................................................................... 58

AVAILABLE DATUMS......................................................................... 64

SPECIFICATIONS ............................................................................... 65

ACCESSORIES ..................................................................................... 66

GLOSSARY ............................................................................................ 68

INDEX ................................................................................................... 71

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

Congratulations on your purchase of the MAP 410. Since introducing the

world’s first commercial, hand-held GPS receiver, Magellan has led the way

with innovative GPS products to meet a wide range of positioning and

navigation needs.

The MAP 410 is a portable, cartographic GPS receiver with a high-

resolution display that represents your location and all of your surroundings.

The powerful 12-channel receiver is compact and lightweight for easy use

while making your way outdoors. You’ll be able to navigate to destinations

all over the world using the MAP 410’s internal map with waypoints,

navaids and points of interest. Now getting to your favorite destination can

be done with the press of a few buttons.

Designed with both the Outdoor and Marine enthusiasts in mind, the MAP

410 is ideal for hiking, mapping your favorite fishing hole, marking trails or

charting courses over land or water. To help you get started using you MAP

410, read the Getting Started and Basic Operation sections of this manual.

These two sections will have you recording waypoints and navigating in no

time at all. The remainder of this manual gives you detailed information

about all the features and functions available in your MAP 410.

Packing List

Before you begin using your new unit, make sure that all the items listed on

the MAP 410 box are included. If any of the items are missing or damaged,

contact Magellan customer service immediately at (800) 707-9971.

Optional accessories are available from your local MAP 410 dealer. See the

Accessories section of this manual for a list of available accessories.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Conventions Used In This Manual

The reference section of this manual is designed to assist you in the use of

your MAP 410. Each topic in the reference section includes a brief

description of the chosen activity, keystroke diagrams representing the keys

to press and sample screens showing how the function is performed. In the

reference section you will be given instructions to follow. Bolded words

indicate the key or keys to be pressed; italics indicate the name of the screen

to be viewed; and, ALL CAPS indicate a menu item to be selected.

Also in the reference section are alerts to inform you of some cautions or

notes that will assist you in using your MAP 410.

The crossing guard with a stop sign indicates the information enclosed is

very important and should be read before moving on.

The notepad icon denotes information that can help you use or understand

your receiver. While this information is not required to perform the

activity, it may provide you with a better understanding of the activity or

shortcuts you can use.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

GETTING STARTED

This section shows you how to begin using your MAP 410 for the first time.

After a brief discussion of the receiver, the following areas will be covered:

• Battery Installation

• First time usage, initializing the receiver

• Operation

Receiver Description

The MAP 410 is a portable, cartographic GPS receiver with a high-

resolution display that represents your location and all of your surroundings.

The powerful 12-channel receiver is compact and lightweight for easy use

while making your way outdoors. You’ll be able to navigate to destinations

all over the world using the MAP 410’s internal map with waypoints,

navaids and points of interest. Your receiver also stores up to 500 waypoints

that are used to navigate. Using four AA batteries, the MAP 410 will

operate continuously for up to 12 hours and the internal lithium backup

battery will keep the receiver’s memory active for up to 10 years.

Receiver Accuracy

The satellite constellation that provides the GPS information your receiver

uses is maintained by the Department of Defense (DoD). GPS positioning,

for general use, provides 25 meter RMS accuracy or better. Since the

signals generated by these satellites are publicly accessible, the DoD has

introduced errors into the satellite signals for security reasons. These errors

are referred to as Selective Availability (SA).

At present, your GPS position will be accurate within 100 meters RMS

horizontally and 150 meters RMS vertically. Due to the errors introduced by

SA, it is possible to get readings outside of these value at times.

ALTIMETER/PRESSURE SENSOR

Your MAP 410 has a built-in barometric pressure sensor to give you more

accurate altitude readings. The altimeter does not need any calibration or

activation, this function is automatic. The MAP 410 uses the combination of

a pressure sensor and GPS elevation to give altitude readings of about +/-

200 feet.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

MAP 410 GPS Receiver

Detachable Quadrifilar Antenna

Display

MAP 410

ZOOM OUT

ENTER/MARK

QUIT

ZOOM IN

POWER/LIGHT

NAV

ARROW

PAD

GOTO

Water Seal Battery Caps

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Keypad Description

Power/Light - When the unit is OFF, pressing this key turns the

unit ON. If the unit is ON, pressing this key for less than one

second turns the light ON and offers two levels of brightness

adjustable with consecutive presses of this key. Pressing and

holding this key for more than one second causes the receiver to go

into a 5-second power down sequence. During the power down

sequence, pressing this key again will immediately turn the

receiver OFF.

Enter/Mark - Pressing this key for less than one second executes

an Enter while pressing this key for more than one second begins

the procedure for marking a user waypoint.

ENTER

MARK

Quit - Cancels the operation of the last key pressed and scrolls

QUIT

backward through the NAV screens.

8-Way Arrows - Scrolls through screens, menus and enters

alphanumeric information. Up/Down Arrows scroll through the

alphanumeric characters. Right/Left Arrows page through menus

and pans in eight directions when on the MAP screen.

NAV - Accesses and scrolls through the Navigation screens.

NAV

MENU - Accesses functions specific to the current display, as well

as other general functions.

GOTO - Allows selection of a destination for a single-leg route

from a list of waypoints. This key also accesses the Man Over

Board function.

GOTO

ZOOM IN - Allows you to zoom in on the Map screens.

ZOOM

ZOOM OUT - Allows you to zoom out on the Map screens.

ZOOM

OUT

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Battery Installation

The MAP 410 uses four AA alkaline batteries that are installed from the

bottom of the receiver. Use the rings to unscrew the water seal battery caps.

Insert the batteries into the battery tubes, with the positive end first, two

batteries in each side, and screw the battery caps until securely closed.

Although it is recommended that four AA batteries be used, in case of an

emergency the receiver will operate with only two batteries if both are

inserted into one of the battery tubes.

ZOOM

If the batteries are left out of the receiver for more than 30 minutes, your

receiver may need to be reinitialized.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Your MAP 410

The constellation of 24 GPS satellites circling the globe is in constant

motion. Before your receiver can tell you where you are, it needs to know

where the satellites are relative to itself. It does this with the use of an

internal almanac, where it has stored in memory a general location for each

of the satellites. The almanac tells the receiver which satellites are in view,

based on the time, date and location of the receiver.

Until the MAP 410 is initialized, it may not know its location, time or date,

therefore, it does not have a reference point to select which satellites to use.

Inputting the initial position, time and date is called initializing your

receiver, which will save you time. Initializing enables the receiver to begin

tracking satellites, and calculating your position, much faster.

Proper Handling - Signal Reception

Because your MAP 410 receives information it needs from satellites orbiting

the earth, the antenna needs to be raised with a relatively unobstructed view

of the sky.

Clear View of the Sky. Your receiver

needs a clear view of the sky, allowing it

to choose from all the satellites currently

available. If the view of the sky is poor,

(large cliffs or buildings, heavy foliage or

other obstructions) the satellite signals can

be blocked and the MAP 410 may take

longer to compute a position fix.

Holding the Receiver. Your MAP 410 is

designed to fit comfortably in your hand. Hold the receiver in the palm

of your hand with the antenna pointing towards the sky.

Turning the Receiver “ON” & “OFF”

To turn your MAP 410 “ON”, press the POWER/LIGHT key and then

press the ENTER key when prompted. If the ENTER key is not pressed

within 10 seconds of being prompted, the receiver will turn “OFF”. Wait for

the unit to scroll through the start-up screens.

To turn the unit “OFF”, press and hold the same POWER/LIGHT key.

This will start a shutdown sequence that counts down the seconds until the

receiver actually turns “OFF”. To immediately turn the receiver “OFF”,

release and press the POWER/LIGHT key again. To cancel the shutdown

sequence, press any other key.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

First Time Use - Initializing the Receiver

Turn your receiver ON by pressing the POWER/

LIGHT key and the ENTER key, when prompted.

Since this is the first time you have used your receiver,

a screen will be displayed prompting you to initialize

your receiver. Press the ENTER key.

ATTENTION

UNIT IS NOT

INITIALIZED

PRESS

ENTER TO

INITIALIZE

If you don’t see this screen upon start-up, then your

receiver was previously initialized. To reinitialize,

press the MENU key, highlight SETUP and press

ENTER.

Arrow icons displayed in the lower right hand corner of a screen indicate

which arrow keys are active for that screen.

INPUT LOCATION INFORMATION

REGION

When the REGION screen appears, shown at right, complete

the following steps:

Use UP/DOWN ARROW

KEYS to highlight the region

where you are located.

Use UP/DOWN ARROW KEYS to

highlight country, province or

state where you are located.

ENTER COORD

USA

ENTER

MARK

AMERICAS

EUROPE

ASIA EAST

ASIA WEST

AUSTRALIA

AFRICA

Use the ARROW

The Elevation

screen appears.

ENTER

MARK

ENTER

MARK

keys to enter your

PACIFIC

present elevation.

If this is not the first time you have used your receiver, or if it is the first

time but your receiver has already begun acquiring satellite signals, time

and date may have already been received from a satellite and you will not

be prompted for time and date.

SETTING LOCAL TIME AND DATE

Use the following steps to set your local time and the date:

TIME

From the TIME

field on the

Use the ARROW keys to

enter the local time and

toggle between AM and PM.

ENTER

MARK

34˚06.52N

117˚49.56W

00000FT

Elevation screen.

Use the ARROW

keys to

input the date.

From the DATE

field on the

Elevation screen.

09:23AM

ENTER

MARK

Your MAP 410 will not automatically change due to daylight savings.

You will have to reset the time using SETUP as explained in the

Customizing section.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

SELECTING PRIMARY USAGE

You can choose what mode your receiver is operating in, either MARINE or

LAND. The default setting is MARINE.

During Initialization

at the Preference

screen.

Use the ARROW keys

to toggle between

MARINE and LAND.

ENTER

MARK

The following chart shows the terminology that your MAP 410 uses while in

land or marine mode. For purposes of this manual, it will be assumed

that the receiver is in the marine mode.

Marine

SOG

Land

SPD

Terminology

Speed

Bearing

BRG

DST

HDG

VMG

CTS

Distance

DST

Heading

COG

Velocity Made Good

Course To Steer

Estimated Time of Arrival

Time To Go

VMG

CTS

ETA

TTG

ETE

Cross Track Error

Recorded Position

XTE

Waypoint

(WPT)

NM/KNOTS

Landmark

(LMK)

Units of Measure

MILES/MPH

or KM/KPH

TAKING A POSITION FIX

Once you have chosen the primary usage for your receiver,

the STATUS screen will be displayed. At this point, you

should go outside in an area where you can get a clear view

of the sky. The MAP 410 will begin receiving data from

the satellites in view and will display the progress on the

STATUS screen.

STATUS

0 0 1 1 1 2

7 8 2 3 8 5

Once your receiver has computed a position fix, the MAP

screen will be displayed. If the MAP screen has been

turned off then the POSITION screen will be displayed.

POWER

TEMP

25 _c

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

SAVING A WAYPOINT

MARK

WPT001

Once your receiver has computed your current position fix,

you may save this position as a waypoint. Use the

following keystrokes:

34˚06.56N

117˚49.60W

900FT

11:23:35PM

12JAN99

ENTER

MARK

ENTER

MARK

From

any

screen.

(PRESS & HOLD)

CREATE MSG

For further information on saving your position with a user-

generated name or a receiver-generated name, refer to the

Basic Operations section of this manual.

SAVE WPT

SAVE TO RTE

CREATING A GOTO ROUTE TO YOUR SAVED WAYPOINT

Once this fixed position has been saved in your receiver,

travel to another location away from the saved position to

create a route back to the saved waypoint. Use the

following keystrokes:

USER

WPT001

Travel away

from your

present location.

Use UP/DOWN ARROW

KEYS to highlight

the USER category.

GOTO

BRG

DST

ENTER

MARK

ENTER

MARK

027^m50.2_mⁿ

Use UP/DOWN ARROW

KEYS to highlight the

waypoint you just saved.

You will be returned to the screen you had been previously viewing.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATION

This section explains the various functions of your MAP 410 and is

organized in order of usage and are accompanied by screen representations

and keystroke diagrams.

Power Up Sequence

WARNING

Your receiver is powered on by pressing the POWER/

THIS DEVICE IS AN

LIGHT key and then the ENTER key within 15 seconds

AID TO NAVIGATION

AND SHOULD NOT

after the WARNING screen is displayed. On power up, the

MAP 410 will display the MAGELLAN LOGO/START UP

screen, the WARNING/COPYRIGHT screen and then you

will press ENTER to switch to the STATUS screen. The

receiver begins searching the sky for satellites and begins

the process of computing a position fix.

BE RELIED UPON

AS A PRIMARY

NAVIGATIONAL

SOURCE. POINT

DATA IS PROVIDED

FOR GENERAL

REFERENCE ONLY

VER 1.00

MAGELLAN CORP

PRESS ENTER

TO CONTINUE

NAV Screens

There are nine NAV (navigation) screens which provide you with necessary

information you will need to use the MAP 410 as a navigational tool. The

screens are: SAT STATUS, POSITION, NAV1, COMPASS, NAV2, MAP,

ROAD, SPEED and TIME.

NAV screens are viewed by pressing the NAV key from any screen. You can

scroll through the NAV screens by repeatedly pressing the NAV key. You

can also scroll through the screens in the opposite direction with the QUIT

key.

All screens, except the SAT STATUS and POSITION screens, can be disabled

by turning them OFF in the NAV SCREENS section of Setup.

THE SAT STATUS SCREEN

The SAT STATUS screen will be the first screen displayed, after the

general well-being of your MAP 410 by showing you satellite status, signal

strengths, battery life and temperature.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

The satellite positions are displayed in the Satellite Position Graph with the

satellite signal strengths on the Satellite Signal Chart.

North Indicator

2D/3D Icon

STATUS

Satellite

Positions

Satellite

Position Graph

Satellite

Signal

Strengths

Satellite

Signal Chart

0 0 1 1 1 2

7 8 2 3 8 5

Satellite

Numbers

POWER

Battery Life

Indicator

TEMP

25 _c

Temperature

Light Icon

On the Satellite Position Graph and the Satellite Signal Chart, satellites

displayed in gray have weak signal strengths while satellites in black have

strong signal strengths. On the Satellite Signal Chart, satellites still

receiving information will display an empty bar.

The bottom of the SAT STATUS screen displays remaining battery power and

ambient temperature of the receiver. Power shown is the estimated battery

life when the receiver is operating on battery power.

Once the receiver has computed a position fix, the SAT STATUS screen will

be replaced by the POSITION screen.

Changing Temp Units and Calibration in the STATUS SCREEN

You have two options for customizing the SAT STATUS screen; TEMP

UNITS and TEMP CALIB.

Selecting Temp Units:

TEMP UNITS

TEMP CALIB

WAYPOINTS

ROUTES

From the

Sat Status

screen.

Use UP/DOWN

ARROW KEYS to

highlight TEMP UNITS.

SETUP

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

TEMP UNITS

Use UP/DOWN ARROW

KEYS to highlight

FAHRENHEIT or CELSIUS.

ENTER

MARK

ENTER

MARK

FAHRENHEIT

CELSIUS

Setting Temperature Calibration

With your MAP 410 you have the ability to calibrate the temperature which

creates an offset from the factory settings to accommodate the environment

that you are in.

At any point in the above steps you may press the QUIT key, or highlight

RESET DFLT and press ENTER, to exit out of the TEMP CALIB screen.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

TEMP CALIB

TEMP

From the

Sat Status

screen.

Use UP/DOWN

ARROW KEYS to

highlight TEMP CALIB.

ENTER

MARK

ENTER

MARK

˚c

Use the ARROW

KEYS to change

the temperature.

Use UP/DOWN

ARROW KEYS to

highlight SAVE EDITS.

ENTER

MARK

ENTER

MARK

SAVE EDITS

RESET DFLT

THE POSITION SCREEN

The POSITION screen displays the coordinates of your last computed

position and basic navigation data. You also have the option of viewing

your present position using another coordinate system.

POSITION

Coordinates

Current Time

Current

Elevation

34˚06.52

117˚49.56

ELEV 900 FT

11:23:35 PM

23JAN99

Estimated Position

Error (may display

DGPS, Simulate or

Averaging)

Current Date

EPE 112 FT

SPEED

5.38 ^K_T

TRIP

238.8 ⁿ_m

Current Speed

Compass

COURSE 150

120 150

Distance Traveled

Course

Position Icon

Second Coordinate

System access

Viewing Secondary Coordinate System from the POSITION Screen

From the POSITION screen, press the LEFT/RIGHT

LAT/LON

ARROWs and the lower half of the screen changes to

display your present position in secondary coordinate

system. The datums that were selected under SETUP

for each coordinate system are also displayed.

˚06.52

117˚49.56

900 FT

11:23:35 PM

23JAN99

EPE 112 FT

WGS84

UTM

Averaging in the POSITION Screen

760W

479N

NAD27

When navigating, your MAP 410 takes

position fixes. However, when you are

stationary, at zero speed, the receiver

begins averaging mode. When

averaging, the receiver continuously

takes fixes and combines them to create

an average, giving you a more accurate

position fix. Once you begin moving,

position averaging ends and the receiver

begins displaying instantaneous position

fixes while you navigate.

POSITION

34˚06.52

117˚49.56

ELEV 900 FT

11:23:35 PM

AVERAGING

00:00:35

SPEED TRIP

5.38 ^K_T238.8 _mⁿ

Averaging

Timer

COURSE 150 _m

120 150

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

THE NAV 1 SCREEN

The NAV 1 screen displays your destination along with four selectable

navigation measurements and a graphical compass.

TO: FISH

Destination

Name

Selectable

Navigation

Data

DST 50.2

SOG 8.2

XTE 3.80 R

VMG 7.2

Destination Icon

Compass

BRG 127_m

120 150

Position Icon

COG 150_m

The NAV 1 screen displays a numerical reading at 30˚ increments with the

characters N (0°), S (180°), E (90°) and W (270°). Course is shown

numerically and represented by the Position Icon at the bottom of the screen.

Above the compass, bearing will be displayed with the icon of the

destination waypoint. When the bearing to your destination cannot be

displayed within the confines of the displayed compass, an arrow will be

displayed either on the right or left to indicate the steering direction.

Ideally, when you are navigating, the Position Icon and the Destination Icon

should line up, one above the other.

Customizing the NAV 1 Screen

CWUPSTTONAMMIZEES

You can change the four navigational fields. You can

choose from BRG, DST, SOG, COG, VMG, CTS, ETA,

ETE, XTE, TRN, ALT, TME, TMP and Blank.

BRG 027°m

OFF

DST 50.2nm

SOG 8.2KT

COG 056°m

VMG 7.2KT

CTS 028°m

ETA 01:09P

ETE 02H24M

XTE L.2^nm

TRN L26°

ALT 83^F_T

From the

NAV 1

screen.

Use UP/DOWN

ARROW KEYS to

highlight CUSTOMIZE.

ENTER

MARK

Use UP/DOWN ARROW

KEYS to highlight the

field you wish to change.

Use UP/DOWN

ARROW KEYS to

highlight your choice.

A pop-up

menu appears.

ENTER

MARK

TME 01:09P

TMP 25°C

BLANK

You are returned

to the NAV1 screen

in the customize mode.

You can continue customizing

using the same steps or

press QUIT to exit this mode.

ENTER

MARK

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

THE COMPASS SCREEN

As well as displaying four customizable navigation fields, the COMPASS

screen provides a pointer compass and Course Deviation Indicator (CDI) to

help you reach your destination.

Destination

Name

TO: HOME

Sun Icon

BRG

DST

3.52^M

127

Destination

Icon

COG

SOG

2.7

Steering Indicator

to Destination

156

Position Icon (Course

Direction Icon)

Moon Icon

Compass

Course

Deviation Indicator

CDI Scale (L/R arrow

to change)

1.0

The Course Direction icon displays your course over ground while the

Steering Indicator displays the bearing of the destination relative to the

course over ground. When the arrows are pointed in the same direction, you

are on course. The CDI indicates your distance left or right of the

courseline.

The NorthFinder ™ feature displays the position of the sun and moon icons,

when above the horizon, which allows you to determine the direction of

north and your destination. The destination icon shows the general direction

in which you should be travelling.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Align the sun on the COMPASS screen with the sun in the sky, as shown.

When aligned, the Steering Indicator will point you in the direction you

should be travelling in order to reach your destination.

Customizing the Compass Screen

With your MAP 410 you have the ability to change the four navigational

fields. You can choose from the following options: BRG, DST, SOG, COG,

VMG, CTS, TMP and Blank. Use the following keystrokes to customize

this screen:

CWUPSTTONAMMIZEES

From the

Compass

screen.

Use UP/DOWN

ARROW KEYS to

ENTER

MARK

BRG 027°m

DST 50.2nm

SOG 8.2KT

COG 056°m

VMG 7.2KT

CTS 028°m

TMP 36°C

BLANK

highlight CUSTOMIZE.

Use UP/DOWN ARROW

KEYS to highlight the

field you wish to change.

Use UP/DOWN

ARROW KEYS to

highlight your choice.

ENTER

MARK

A pop-up

menu appears.

You are returned

You can continue customizing

using the same steps or

press QUIT to exit this mode.

ENTER

MARK

to the Compass screen

in the customize mode.

THE NAV 2 SCREEN

The NAV 2 screen displays four customizable information

fields. It is designed to help you see the screen when your

receiver is mounted at a distance from you.

TO: CAMP

^BRG14.2˚

COG

171˚

^SOG11.2^K

^DST50.2^N

Customizing the NAV 2 Screen

CWUPSTTONAMMIZEES

You can change the four navigational fields. You can

choose from BRG, DST, SOG, COG, VMG, CTS, ETA,

ETE, XTE, TRN, ALT, TME, TMP and Blank.

BRG 027°m

OFF

DST 50.2nm

SOG 8.2KT

COG 056°m

VMG 7.2KT

CTS 028°m

ETA 01:09P

ETE 02H24M

XTE L.2^nm

TRN L26°

ALT 83^F_T

From the

NAV 2

screen.

Use UP/DOWN

ARROW KEYS to

highlight CUSTOMIZE.

ENTER

MARK

Use UP/DOWN ARROW

KEYS to highlight the

field you wish to change.

Use UP/DOWN

ARROW KEYS to

highlight your choice.

A pop-up

menu appears.

ENTER

MARK

TME 01:09P

TMP 25°C

BLANK

You are returned

to the NAV2 screen

in the customize mode.

You can continue customizing

using the same steps or

press QUIT to exit this mode.

ENTER

MARK

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

THE MAP SCREEN

This screen depicts your last computed position plotted against a

cartographic background. As you move with your receiver, the position icon

will update to reflect the direction and distance that you have moved.

Segundo

Hawthorne

405

710

110

Manhattan Beach

Lawndale

Compton

Gardena

Hermosa Beach

107

State/Local

Highway

710

213

405

Carson

Position Cursor

Torrance

Signal Hill

405

110

Palos Verdes Estates

710

Los

Lomita

Rancho Palos Verdes

Floating Waypoint

San Pedro

Local Road

Long Beac

Cerritos Channel

12 mi

Lighthouse Icon

TO:

ARROWHEAD COVE

BRG DST

Scale

134 ^°

23.1_M

Navigational Data

COG

SOG

Destination

137 ^°

16.1_T

This screen was enlarged for ease of reading. For a

list of cartographic objects, please refer to the

Cartography Legend.

Cartography Legend

The following table outlines cartographic objects used on the MAP screen of

your MAP 410.

710

Major City

(pop. >500K & Capitals)

Interstate Highway

Railroad Tracks

Large City

101

(pop. 100K to 500K)

Federal Highway

Medium City

(pop. 20K to 100K)

State/Country Border

Small City

(pop. <20K)

State/Local Highway

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Cartographic Shading

For ease of viewing, the cartographic shading on the MAP screen in your

MAP 410 is controlled by the setting you choose as your primary usage

during the initialization process, Marine or Land. When your receiver is

operating in Marine mode, the land is represented by gray shading while the

water is clear to aid in viewing waypoints and other cartographic objects.

Also, when operating in the Marine mode, more shallow areas of the water

will be represented by light shading so that you can decipher depths when

making your way in your watercraft. Conversely, when your receiver is

operating in the Land mode, the water is represented by gray shading while

the land is clear. The shallow areas of water are outlined with a white line to

distinguish them from the deeper areas. Examples are shown below.

Segundo

Hawthorne

Land Unshaded

405

710

110

Manhattan Beach

Lawndale

Manhattan Beach

Lawndale

Gardena

Compton

Gardena

Compton

Land Shaded

Hermosa Beach

107

710

213

405

Carson

405

Carson

Water Shaded

Torrance

Signal Hill

405

110

Water Unshaded

Palos Verdes Estates

710

Los

Lomita

Rancho Palos Verdes

San Pedro

Long Beac

Cerritos Channel

12 mi

TO:

ARROWHEAD COVE

BRG DST

TO:

ARROWHEAD COVE

BRG DST

Shallow Area

(separated by line)

Shallow Area

(shaded)

134 ^°

23.1_M

134 ^°

23.1_M

COG

SOG

COG

SOG

137 ^°

16.1_T

137 ^°

16.1_T

Land Mode

Marine Mode

MAP Setup

MAP SETUP

The MAP setup function allows you to select the MAP

orientation, Course projection and Cartographic settings.

Use the following keystrokes to access the MAP SETUP

screen:

ORIENTATION

NORUP

OFF

COURSE PROJ

LAT/LON GRID

MAP TEXT

MAJOR CITIES

LARGE CITIES

MEDIUM CITIES

SMALL CITIES

MAJOR HWY

300

200

From

the Map

120

Use UP/DOWN

ARROW KEYS to

ENTER

STATE/LOCAL HWY

LOCAL ROADS

RAILROADS

MARK

screen.

highlight MAP SETUP.

OFF

UPLOADED DATA

To exit MAP setup, press the QUIT key.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

MAP Screen Orientation

The MAP screen has three types of orientation to choose from; North up,

Course up and Track up. North up has north located at the top of the screen,

Course up has the destination of the current leg at the top of the screen and

Track up has the direction you are moving at the top of the screen.

WPT NAMES

ORIENT

From the

Map

screen.

Use UP/DOWN

ARROW KEYS to

highlight MAP SETUP.

ENTER

MARK

TRACK UP

COURSE UP

NORTH UP

Use UP/DOWN ARROW

KEYS to highlight

the ORIENTATION setting.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

The default setting is North up.

Course Projection

You may want to know where you will be after a specified period of time

based on your current speed and heading. You can do this by setting your

receiver to one of the following: OFF, 1 MINUTE, 2 MINUTES, 5

MINUTES or 10 MINUTES.

WPT NAMES

PROJECTION

OFF

1 MINUTE

From

the Map

screen.

Use UP/DOWN

ARROW KEYS to

highlight MAP SETUP.

ENTER

MARK

2 MINUTES

5 MINUTES

10 MINUTES

Use UP/DOWN

ARROW KEYS to

highlight your choice.

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight COURSE PROJ.

A solid black line will appear starting from your position to the projected

position. The default setting is OFF.

LAT/LON Grid

With your MAP 410 you have the option of displaying or not displaying grid

lines on the MAP screen. If the primary navigation mode is UTM then UTM

grid lines will be displayed or if Lat/Lon is the primary navigation mode

then Lat/Lon grid lines will be displayed. Grid lines are displayed as gray

dotted lines.

From

the Map

screen.

WPT NAMES

LAT/LON GRID

Use UP/DOWN

ARROW KEYS to

highlight MAP SETUP.

ENTER

MARK

OFF

Use UP/DOWN

ARROW KEYS to

highlight ON or OFF.

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight LAT/LON GRID.

The default setting is ON.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Map Text

At times you may want to view the screen with less text showing to give a

better view of landmarks or waypoints. You do this by turning the Map Text

off using the following keystrokes.

From

the Map

screen.

Use UP/DOWN

ARROW KEYS to

highlight MAP SETUP.

WPT NAMES

MAP TEXT

ENTER

MARK

OFF

Use UP/DOWN

ARROW KEYS to

highlight MAP TEXT.

Use UP/DOWN

ARROW KEYS to

highlight ON or OFF.

ENTER

MARK

ENTER

MARK

Turning the text off will not turn off your waypoints or landmarks, you do

that on the second page of the MAP SETUP screen. The default setting is

ON.

Cities

This function allows you to decide if, and at what scale, the different

categories of cities will be displayed on the MAP screen. This includes the

four categories of cities listed on the MAP SETUP screen; MAJOR CITIES,

LARGE CITIES, MEDIUM CITIES and SMALL CITIES. Each category is

controlled individually.

From

Use UP/DOWN

ARROW KEYS to

MAP SCALES

ENTER

MARK

the Map

screen.

OFF

0.1

0.3

0.5

0.8

highlight MAP SETUP.

Use UP/DOWN ARROW

KEYS to highlight

the city category.

Use UP/DOWN ARROW

KEYS to highlight

the desired scale.

ENTER

MARK

ENTER

MARK

200

Continue the above steps for all the cities.

Highways

This function allows you to decide if, and at what scale, the different

categories of highways will be displayed on the MAP screen. This includes

the three categories of highways listed on the MAP SETUP screen; MAJOR

HWY, STATE/LOCAL HWY and LOCAL ROAD. Each category is

controlled individually.

MAP SCALES

OFF

From

the Map

screen.

Use UP/DOWN

ARROW KEYS to

highlight MAP SETUP.

0.1

0.3

0.5

0.8

ENTER

MARK

200

Use UP/DOWN ARROW

KEYS to highlight

Use UP/DOWN ARROW

KEYS to highlight

ENTER

MARK

ENTER

MARK

the highway category.

the desired scale.

Continue the above steps for all the highways.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Railroads

This function allows you to decide if, and at what scale, railroads will be

displayed on the MAP screen.

MAP SCALES

OFF

0.1

0.3

0.5

0.8

From

the Map

screen.

Use UP/DOWN

ARROW KEYS to

highlight MAP SETUP.

ENTER

MARK

200

Use UP/DOWN

Use UP/DOWN ARROW

KEYS to highlight

the desired scale.

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight RAILROAD.

Enabling/Disabling Uploaded Data

MAP SETUP

This function allows you to turn data that is uploaded into

your receiver either ON or OFF.

ORIENTATION

NORUP

COURSE PROJ

LAT/LON GRID

MAP TEXT

OFF

300

200

MAJOR CITIES

LARGE CITIES

MEDIUM CITIES

SMALL CITIES

MAJOR HWY

From the

Map

screen.

Use UP/DOWN

ARROW KEYS to

highlight MAP SETUP.

ENTER

MARK

120

STATE/LOCAL HWY

LOCAL ROADS

RAILROADS

Use UP/DOWN ARROW

KEYS to highlight

the UPLOADED DATA.

Use UP/DOWN

ARROW KEYS to

highlight ON or OFF.

ENTER

MARK

ENTER

MARK

OFF

UPLOADED DATA

Use UP/DOWN

A confirmation/

warning screen

appears.

ENTER

MARK

ARROW KEYS to

highlight YES or NO.

Turning OFF uploaded data will erase all routes contained in your

receiver’s memory.

Waypoints

WPT NAMES

USER

This function allows you to decide if, and at what scale,

waypoints will be displayed on the MAP screen. You will

have the options of OFF, ICONS ONLY or ICONS/NAMES

plus the choice of what scale you want them to be displayed

on the MAP screen.

OFF

ICONS ONLY

ICONS/NAMES

From

MAP SCALES

Use UP/DOWN

ENTER

MARK

the Map

screen.

ARROW KEYS to

0.1

0.2

0.3

0.5

0.8

highlight MAP SETUP.

Use UP/DOWN ARROW

KEYS to highlight

the waypoint category.

Use UP/DOWN

ENTER

MARK

ARROW KEYS to

highlight the icon setting.

200

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight the Map scale.

Continue with these steps until all of the settings are complete. The default

setting for Waypoints is ICONS/NAMES and a scale of 2 miles.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Data Window

Segundo

Hawthorne

On the bottom of the MAP screen a data window is

shown that contains the name of the destination

waypoint for the current leg of the active route as well as

the bearing (BRG) and distance (DST) to the destination

waypoint of the current leg. Also displayed are the

course over ground (COG) and speed over ground

(SOG). The cartography scale is displayed above the

window.

405

710

110

Manhattan Beach

Lawndale

Gardena

Compton

Hermosa Beach

107

710

213

405

Carson

Torrance

Signal Hill

405

110

Palos Verdes Estates

710

Los

Lomita

Rancho Palos Verdes

San Pedro

Long Beac

Cerritos Channel

12 mi

TO:

If the receiver’s orientation is set to Track up or

Course up, the North arrow will appear in the upper

right hand corner which points in the direction of

north.

ARROWHEAD COVE

BRG

DST

134 ^°

23.1_M

COG

SOG

137 ^°

16.1_T

When the receiver is first turned on and the map screen accessed for the first

time, the map will center on the current or last position computed and the

scale will be the last used map scale.

Setting Hide/Show Data

This function allows you to hide or show the Data Window on the MAP

screen. When the Data Window is displayed the option on the menu will be

HIDE DATA and when the Data Window is hidden the option will be

SHOW DATA. Use the following keystrokes to hide or show the Data

Window:

From

the Map

screen.

Use UP/DOWN ARROW

KEYS to highlight

HIDE DATA or SHOW DATA.

ENTER

MARK

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Track History

This function allows you to select the track history interval or turn it off.

Using TRACK HISTORY records where you have been by automatically

storing locations, as “dropping bread crumbs”, from your starting point as

you travel. This is useful when you want to return to your starting point.

The default setting is AUTO which, depending on your speed and bearing,

automatically leaves “bread crumbs” displaying your track. The AUTO

setting makes use of the SmartTrack feature which stops leaving “bread

crumbs” when your speed is zero, leaves a lot of “bread crumbs” when you

are making a turn and leaves fewer “bread crumbs” when you are traveling

in a straight line. This keeps your track looking more like the actual path

you traveled instead of jagged lines. Your track history will be displayed on

the map using a black dotted line.

WPT NAMES

TRACK HIST

OFF

From

Use UP/DOWN

ARROW KEYS to

AUTO

the Map

screen.

0.01 NM

0.1 NM

0.2 NM

0.5 NM

1.0 NM

2.0 NM

highlight TRACK HIST.

Use UP/DOWN

ARROW KEYS to

ENTER

MARK

ENTER

MARK

highlight your choice.

Clear Track

You have the ability to clear the track history from your MAP screen, thus

freeing up space to view other navigational data.

WPT NAMES

WARNING

OFF

CLEAR

TRACK

HISTORY?

YES

From

the Map

screen.

Use UP/DOWN

ARROW KEYS to

highlight CLR TRACK.

ENTER

MARK

Use UP/DOWN

ARROW KEYS to

highlight YES.

ENTER

MARK

confirmation

screen appears

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Routes

Routes will be displayed on the MAP screen as a black line for each leg,

separated by the icons representing the waypoints that make up the legs of

the route.

MAP Scale

The map scale appears at the lower left hand corner of MAP screen unless

the Data Window is displayed. When the Data Window is displayed, the

map scale will appear above the window. The map scale represents the

distance on the map scaled to half the width of the screen. The map scale

bar is shaded as shown to display the 1/2 and 1/4 scale distances. The map

scale distance appears to the right of the scale.

10 mi

Map Find

This allows you to find a waypoint anywhere on the MAP

screen by using a few keystrokes and scrolling through the

HIDE DATA

TRACK HIST

list of waypoints. Use the following keystrokes to find a

specific waypoint:

CLR TRACK

MAP SETUP

MAP FIND

WAYPOINTS

ROUTES

SETUP

From the

Map

screen.

Use UP/DOWN

ARROW KEYS to

highlight MAP SETUP.

ENTER

MARK

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

Use UP/DOWN ARROW

KEYS to highlight

the ORIENTATION setting.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

After completing the above steps you will be returned to the MAP screen

with the cursor over the waypoint that was just selected.

Panning Around the MAP

While in the MAP screen you can use the 8-way ARROW KEYS to

pan around the screen. This allows you to scan the MAP to see

what your surroundings are or where a specific waypoint is located

in relation to your current position. While panning, the cursor will be

displayed as an icon representing crosshairs.

Pressing the QUIT key will center the MAP screen on your present position

and hide the crosshairs.

When panning around the MAP screen, the screen orientation will lock

into its current setting, as was designated in SETUP, and will unlock by

pressing the QUIT key or exiting and returning back to the MAP screen.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessing WPTs from the MAP

Segundo

Hawthorne

When the cursor is placed over the icon of a waypoint,

the name, bearing, distance and position of that waypoint

are displayed. You also have the ability to obtain

405

710

110

Manhattan Beach

Lawndale

Gardena

Compton

Hermosa Beach

107

710

information regarding that waypoint above and beyond

what is displayed on the screen. While over a waypoint

icon, press the MENU key and highlight WPT INFO and

press ENTER. The WPT INFO screen is now displayed

showing further information about this waypoint.

213

405

Carson

Torrance

Signal Hill

405

110

Palos Verdes Estates

710

Los

Lomita

Rancho Palos Verdes

San Pedro

Long Beac

Cerritos Channel

12 mi

TO:

ARROWHEAD COVE

BRG DST

If the cursor is placed over a cartographic object for

more than one second, a window appears identifying the

object. Pressing the QUIT key will hide the window.

134 ^°

23.1_M

COG

SOG

137 ^°

16.1_T

THE ROAD SCREEN

The ROAD screen displays four customizable navigation fields, at the top of

the screen, as well as a display to show your position on the desired route.

At the top of the screen, the destination name is displayed along with

navigation data fields. The pictorial road screen shows your position in

TO: FISH

Destination

Name

BRG

DST

3.52_m

127_m

Navigation Data

SOG

COG

156

2.7

Destination

Icon

Desired Route

Position Icon

1.0

Scale

relation to your desired route, as well as your cross track error. The road

shows the direction in which you should be travelling to reach your

destination; when the destination icon is straight ahead, you are on course.

If you are off course, such that the destination icon is off the screen, an

arrow icon will appear to point you in the direction to get back on course.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Customizing the ROAD Screen

You can change the four navigational fields. You can choose from BRG,

DST, SOG, COG, VMG, CTS, TMP and Blank.

From the

Road

Use UP/DOWN

ARROW KEYS to

CWUPSTTONAMMIZEES

ENTER

MARK

BRG 027°m

DST 50.2nm

SOG 8.2KT

COG 056°m

VMG 7.2KT

CTS 028°m

TMP 36°C

BLANK

screen.

highlight CUSTOMIZE.

Use UP/DOWN ARROW

KEYS to highlight the

field you wish to change.

Use UP/DOWN

ARROW KEYS to

highlight your choice.

A pop-up

menu appears.

ENTER

MARK

You are returned

to the Road screen

in the customize mode.

You can continue customizing

using the same steps or

press QUIT to exit this mode.

ENTER

MARK

Changing the Scale

You have the ability to change the scale on the ROAD screen. To increase

the scale, press the ZOOM OUT key and to decrease the scale, press the

ZOOM IN key.

THE SPEED SCREEN

While using the SPEED screen, you can view the graphical speedometer,

odometer and trip odometer as well as the numerical bearing, course over

ground and speed over ground.

TO: CAMP

Destination

Name

COG

056^m

BRG

Average Speed Icon

Speed

027^°_m

Graphical

Speedometer

Navigation

Data

SOG15.0_T

ODOMETER

2 _n

0 0 5 4 2

TRIP

Odometer

Trip Odometer

0 5 4

The top of the screen displays the destination name, bearing and course.

The Graphical Speedometer is shown with a Circumference Bar that moves

clockwise around the Speedometer to indicate instantaneous speed. The

scale for the Speedometer is adjustable by using the RIGHT/LEFT

ARROWs, as well as the ZOOM IN and ZOOM OUT keys, to increase or

decrease the scales. The Average speed is represented by the icon on the

Speedometer and can be customized.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Resetting the Odometer

To reset the odometer use the following keystrokes:

WARNING

From the

Speed

Use UP/DOWN

ARROW KEYS to

RESET

ODOMETER

TO 000?

YES

ENTER

MARK

screen.

highlight ODOM RESET.

A pop-up

Use UP/DOWN

ARROW KEYS to

highlight YES or NO.

ENTER

MARK

confirmation

window appears.

Resetting the Trip Odometer

Use the following keystrokes to reset your MAP 410’s trip odometer:

From the

Speed

screen.

WARNING

Use UP/DOWN

ARROW KEYS to

highlight TRIP RESET.

ENTER

MARK

RESET

TRIP

TO 000?

YES

A pop-up

Use UP/DOWN

ARROW KEYS to

highlight YES or NO.

ENTER

MARK

confirmation

window appears.

Setting the Speed Average

You may want to reset the Speed Average field in your receiver. You can

choose from TRIP, 5, 30 seconds, 1, 5 minutes or 1 hour. The TRIP option is

the average over the whole trip. The default is 30 seconds.

SPEED AVG

From the

Speed

screen.

Use UP/DOWN

ARROW KEYS to

highlight SPEED AVG.

ENTER

MARK

TRIP

5 SECONDS

30 SECONDS

1 MINUTE

5 MINUTES

1 HOUR

A pop-up

Use UP/DOWN ARROW KEYS

to highlight TRIP, 5 SECONDS, 30

SECONDS, 1 MINUTE, 5 MINUTES or 1 HOUR.

ENTER

MARK

window

appears.

THE TIME SCREEN

The TIME screen displays the current time, estimated time

enroute (ETE), time of arrival and elapsed time in regards

to the route you are navigating in. The first data field can

be customized to correct the current time and to select the

time format.

TIME

03:54:21^P_M

ETE

01:09:24

OF ARRIVAL

04:34:20^P_M

ELAPSED

02:24:56

The TIME screen defaults to OFF. To view this screen you will need to

turn it ON. See Enabling/Disabling NAV Screens section for further

details.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Selecting TIME Format

You may need to correct the current time or change the time format. Your

choices for time format are LOCAL 24HR, LOCAL AM/PM and UTC.

From

any

screen.

TIME FORMAT

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

LOCAL 24HR

LOCAL AM/PM

UTC

Use UP/DOWN

ARROW KEYS to

highlight TIME FORMAT.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

The term waypoint is used when your receiver is in the Marine mode and

the term landmark is used in the Land mode.

NAV SCREEN DEFAULTS

The following chart identifies what the default states are for the nine (9)

NAV screens displayed in your MAP 410. With the exception of the

POSITION screen and SAT STATUS screen, you can turn the NAV screens off

using the procedures found in the Enabling/Disabling the NAV Screens

section of this manual.

Default ON or OFF

NAV Screen

SAT STATUS

POSITION

NAV1

OFF

COMPASS

NAV2

MAP

OFF

ROAD

SPEED

TIME

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with Waypoints (WPTs)

Waypoints and landmarks are positions that are saved in your receiver’s

memory and used to create routes. For purposes of this manual, the term

waypoint is used since the default setting of your MAP 410 is marine. This

section tells you how to create, save, edit, delete, project, sort and find

waypoints. You can store up to 500 waypoints which are used to create

routes for navigation.

WAYPOINTS

USER

THE WAYPOINT MENU

The Waypoint Menu lists the available categories of

AIRPORTS

RAIL STOPS

waypoints that you can choose from when navigating using

WATER PORTS

your MAP 410.

SIGHT SEEING

HISTORIC

MUSEUMS

PARKS/GARDEN

AMUSEMENT

GOLF COURSES

SPORTS ARENAS

SELECTING A WAYPOINT CATEGORY

Your MAP 410 allows you to find and retrieve information on all waypoints

stored in memory. You also have the ability to create, edit and delete

waypoints you have stored in your receiver. There are two categories of

waypoints; User and Non-User. Following are descriptions of both these

categories as well as a chart that shows the functions of each.

W PT Ty p e s

Ava ila b le Fu n ctio n s

•

Create

Edit

Delete

Project

Sort

User

•

Find

Project

Sort

Non-User

User Waypoints

User waypoints are locations that you save in your receiver’s memory,

including their coordinates and an icon you associate with them. These

waypoints are editable by you and can be deleted when no longer needed.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Non-User Waypoints

Non-User waypoints are waypoints that are uploaded into your receiver that

display destinations of interest, including their coordinates and their name.

Non-User waypoints are not editable and are permanently stored in your

receiver’s memory and cannot be deleted unless written over by waypoints

downloaded from the MapSend™ CD (see the Accessories Appendix for

further details).

SAVING A WAYPOINT (USER ONLY)

Waypoints are used to create routes and GOTOs. You have two options

when naming waypoints. You can create waypoints with either a receiver-

created name or with a name you create yourself.

Saving Your Position Fix with a Receiver-Generated Name

From anywhere in the receiver, you can save (MARK) your position with a

receiver created name. This is the fastest way to save your position.

To save a waypoint with a receiver-created name, press and hold MARK

and press and hold MARK again. The waypoint will be saved with a

receiver-generated name beginning with WPT001, WPT002 and so on.

Saving Your Position Fix with a User-Created name

MARK

DOCK

Use the following keystrokes to save your current position

with a name you choose.

34˚06.56N

117˚49.60W

900 FT

11:23PM

12JUN99

Use ARROW KEYS to enter

the alphanumeric characters

of the name you choose.

ENTER

MARK

ENTER

MARK

ENTER

MARK

(PRESS & HOLD)

CREATE MSG

Use UP/DOWN

Use ARROW KEYS

to highlight the waypoint

icon of your choice.

ENTER

MARK

ENTER

MARK

ENTER

MARK

ARROWS to

SAVE WPT

SAVE TO RTE

highlight SAVE WPT.

CREATING A WAYPOINT (USER ONLY)

This allows you to create a waypoint at a position where

you are not currently located.

MARK

DOCK

Use ARROW KEYS to enter

34˚06.56N

ENTER

MARK

ENTER

MARK

ENTER

MARK

the alphanumeric characters

of the name you choose.

117˚49.60W

(PRESS & HOLD)

900 FT

11:23PM

12JUN99

Use ARROW KEYS

to highlight the waypoint

icon of your choice.

Use UP/DOWN ARROW

KEYS to highlight the

field you wish to change.

ENTER

MARK

ENTER

MARK

ENTER

MARK

CREATE MSG

SAVE WPT

SAVE TO RTE

Use ARROW KEYS to

input the data for

the desired fields.

Use UP/DOWN

ARROW KEYS to

highlight SAVE WPT.

ENTER

MARK

ENTER

MARK

ENTER

MARK

EDITING A WAYPOINT (USER ONLY)

This sections deals with the following options: editing a waypoint name,

editing the waypoint icon, editing coordinates, editing elevation and editing

a message.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting a Waypoint to Edit (User Only)

Use the following steps to select the waypoint you wish to

edit:

EDIT WPT

SORT WPT

DELETE WPT

PROJECTION

WAYPOINTS

ROUTES

From any

NAV

Use UP/DOWN

ARROW KEYS to

ENTER

MARK

screen.

highlight WAYPOINTS.

SETUP

Use UP/DOWN ARROW

KEYS to highlight the

Use UP/DOWN ARROW

KEYS to highlight

ENTER

MARK

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

waypoint you wish to edit.

the USER category.

Use UP/DOWN

ARROW KEYS to

highlight EDIT WPT.

ENTER

MARK

Editing Waypoint Fields (User Only)

EDIT WPT

WPT003

Use the following steps to edit the fields of the selected

waypoint:

34˚06.56N

117˚49.60W

900FT

11:23:35PM

12JUN99

After selecting

the waypoint

you wish to edit

Use UP/DOWN ARROW

KEYS to highlight the

data field you wish to edit.

ENTER

MARK

NO CAMP

FIRES

Use UP/DOWN ARROW

KEYS to enter

the data for that field.

Repeat these

ENTER

MARK

steps for the

additional fields.

SAVE EDITS

DELETE MSG

Creating/Editing/Deleting a Message in a Waypoint (User

Only)

To create a message in a waypoint, follow the instructions on selecting a

waypoint and then complete the following steps:

Use UP/DOWN

ARROW KEYS to

highlight CREATE MSG.

Use the ARROW KEYS

to input alphanumeric

characters (20 max).

ENTER

MARK

ENTER

MARK

To edit a message, follow the instructions on selecting a waypoint and then

complete the following steps:

Use UP/DOWN

ARROW KEYS to

scroll to the message.

Use the ARROW

KEYS to input changes

to your message.

ENTER

MARK

ENTER

MARK

To delete a message, follow the instructions on selecting a waypoint and

then complete the following steps:

Use UP/DOWN

ENTER

ARROW KEYS to

MARK

highlight DELETE MSG.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Saving Changes to the Selected Waypoint (User Only)

EDIT WPT

CAMP

To save your changes, follow the instructions on selecting

a waypoint and then complete the following steps:

34˚06.56N

117˚49.60W

900 FT

11:23:35PM

12JUN99

Use UP/DOWN

ENTER

MARK

ARROW KEYS to

highlight SAVE EDITS.

CREATE MSG

SAVE EDITS

DELETING A WAYPOINT (USER ONLY)

You may find that you have too many saved waypoints that

you no longer use. In this case, you can delete these

unnecessary waypoints. Once these waypoints are deleted,

you cannot undo this process or retrieve these deleted

waypoints.

DELETE

WPT023?

YES

From any

NAV

screen.

Use UP/DOWN

ARROW KEYS to

highlight WAYPOINTS.

Use UP/DOWN ARROW

KEYS to highlight

the USER category.

ENTER

MARK

Use UP/DOWN ARROW

KEYS to highlight the

waypoint you wish to delete.

Use UP/DOWN

ARROW KEYS to

highlight DELETE WPT.

ENTER

MARK

ENTER

MARK

A pop-up

Use UP/DOWN

ARROW KEYS to

highlight YES or NO.

ENTER

MARK

ENTER

MARK

confirmation

window appears.

PROJECTING A WAYPOINT (USER & NON-USER)

This function allows you to create a waypoint at a certain distance and

direction from an existing waypoint or from your current position.

From any

Use UP/DOWN

ARROW KEYS to

highlight WAYPOINTS.

Use UP/DOWN ARROW

KEYS to highlight the

category the waypoint is in.

PROJECTION

FROM

ENTER

MARK

NAV

screen.

WPT003

G.C. BRG/DST

Use UP/DOWN

Use UP/DOWN ARROW KEYS

to highlight the waypoint

you wish to project.

BRG 000

ENTER

MARK

ENTER

MARK

ARROW KEYS to

DST 000^N_M

LAT/LON

highlight PROJECTION.

34˚08.56N

117˚50.60W

The Projection

screen is

displayed.

Use UP/DOWN ARROW

KEYS to highlight the field

where you want to make changes.

ENTER

MARK

ENTER

MARK

UTM

760W

479N

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

In the G.C. (Great Circle) BRG/DST field, you can input the bearing and

distance into the data fields in order to compute the projection. You can also

input information into the coordinate fields.

Once you have the necessary information in the data fields and the receiver

has projected the position, you can save the position by pressing MARK.

SORTING A WAYPOINT (USER & NON-USER)

SORT WPT

You may want to change how the waypoints are sorted. You

have the options of ALPHABETIC, NEAREST and ICON/

NAME (User Only).

ALPHABETIC

NEAREST

ICON/NAME

User Menu

From any

NAV

screen.

Use UP/DOWN

ARROW KEYS to

highlight WAYPOINTS.

ENTER

MARK

Use UP/DOWN

Use UP/DOWN ARROW

KEYS to highlight the

category the waypoint is in.

SORT WPT

ENTER

MARK

ARROW KEYS to

highlight SORT WPT.

ALPHABETIC

NEAREST

A pop-up

Use UP/DOWN ARROW

ENTER

MARK

ENTER

MARK

KEYS to highlight

appears.

your desired option.

Non-User Menu

FINDING A WAYPOINT (NON-USER ONLY)

To find a particular waypoint use the following steps:

From

any

Use UP/DOWN

ARROW KEYS to

Use UP/DOWN ARROW

ENTER

MARK

KEYS to highlight the

screen.

highlight WAYPOINTS.

category the waypoint is in.

Use UP/DOWN

ARROW KEYS to

highlight FIND.

Use UP/DOWN ARROW

KEYS to input the

characters of the waypoint.

ENTER

MARK

ENTER

MARK

You are brought back to

the Waypoint Menu with

the chosen waypoint highlighted.

The information

on that waypoint

is displayed.

ENTER

MARK

ENTER

MARK

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Working with Routes

A route is a planned course of travel defined by a series of waypoints stored

in the receiver’s memory. These waypoints are connected to form the

segments or “legs” of the route. Waypoints that are saved in the receiver’s

memory can also be inserted into a route. There are 5 different types of

routes; GOTO, BACKTRACK, MOB, MULTI-LEG and TRACK ROUTE.

The MAP 410 holds 20 routes with 30 fully-reversible legs. The route

function allows you to activate, create, view/edit or delete any one of the 20

routes.

ROUTE MENU

THE ROUTE MENU

TRACK ROUTE

FISH

....CAMP

The Route menu lists all current routes that are saved in

your receiver’s memory. Use the following keystrokes to

access the Route menu:

EMPTY

From

any

screen.

Use UP/DOWN

ARROW KEYS

to highlight ROUTES.

ENTER

MARK

LEGS DISTANCE

20.5_M^N

Creating a GOTO Route

A GOTO is a route which guides you from your current

position to any waypoint in the receiver’s memory. As an

example, you can save a waypoint at your home.

USER

DOCK

CAMP

From your

present

location.

Use UP/DOWN ARROW KEYS

to highlight the category the

waypoint you wish to goto is stored.

GOTO

Use UP/DOWN ARROW

KEYS to highlight the waypoint

you wish to navigate to.

BRG

DST

ENTER

MARK

ENTER

MARK

027^m50.2_mⁿ

Creating a GOTO Route from the Map Screen

This function allows you to create a GOTO route directly

from the MAP screen by placing the cursor over a position

and pressing the GOTO key. You can place the cursor over

a particular waypoint or destination of interest or over a

position on the screen that is unmarked. When you set a

GOTO to an unmarked location, your receiver marks that

position and gives it a temporary waypoint name called

WPT NAMES

GOTO

MAP?

YES

“MAP”. You will then start navigating towards “MAP”. When you set a

GOTO to a destination of interest or waypoint, a confirmation screen

appears confirming your desire to navigate to that position, which is already

named and doesn’t need the “MAP” designation. Highlight YES and press

the ENTER key and you will begin navigating towards that position.

A confirmation

screen appears

confirming your GOTO.

Use UP/DOWN

ARROW KEYS to

highlight YES or NO.

From

the MAP

screen.

ENTER

MARK

GOTO

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Using FIND in a GOTO Route

When creating a GOTO route, you may need to find the waypoint you wish

to navigate towards. Using the FIND function allows you to quickly find

the desired waypoint. This option is not available for User waypoints.

From your

present

Use UP/DOWN ARROW KEYS

to highlight the category the

ENTER

MARK

GOTO

FIND

location.

waypoint you wish to goto is stored.

CLEAR GOTO

SORT WPT

BACKTRACK

WAYPOINTS

ROUTES

Use UP/DOWN

Use UP/DOWN ARROW KEYS to alphabetically

scroll through the waypoints in the category

you selected. Highlight your desired waypoint.

ENTER

MARK

ARROW KEYS

to highlight FIND.

SETUP

You are returned to the

GOTO screen with the

chosen waypoint highlighted.

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

ENTER

MARK

ENTER

MARK

Clearing a GOTO Route

The CLEAR GOTO function allows you to delete an active GOTO route.

Use UP/DOWN

ENTER

MARK

ARROW KEYS to

GOTO

highlight CLEAR GOTO

CREATING A MAN OVER BOARD (MOB) ROUTE

GOTO

MOB

USER

Another type of route is Man Over Board (MOB). The

MOB route is useful when you want to instantly create a

route.

AIRPORTS

RAIL STOPS

WATER PORTS

SIGHTSEEING

HISTORIC

From your

present

Use UP/DOWN

ARROW KEYS

to highlight MOB.

ENTER

MARK

GOTO

location.

MUSEUMS

PARK/GARDEN

AMUSEMENT

GOLF COURSES

When you press ENTER, your receiver will store the

position and set a GOTO route to it. MOB waypoints are

titled MOB001, MOB002, etc. If an MOB already exists,

the receiver will give you the option of replacing the MOB.

Clearing a MOB

The CLEAR MOB function allows you to delete an active MOB route.

Clearing a MOB route does not delete the MOB waypoint from the

receiver’s memory. You will have to delete this waypoint from the waypoint

list.

From the

GOTO

Screen.

Use UP/DOWN

ARROW KEYS to

highlight CLEAR MOB.

ENTER

MARK

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

CREATING A BACKTRACK ROUTE

Backtrack creates a route that starts from the last point

recorded in track history, using the “bread crumbs” saved, to

the first point recorded for track history. By following this

route, you “retrace your steps” back to the starting point.

ACTIVATE

VIEW/EDIT

REVERSE

DELETE

BACKTRACK

MAP VIEW

Use UP/DOWN

WAYPOINTS

ROUTES

SETUP

ENTER

MARK

ARROW KEYS to

highlight ROUTES.

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

Use UP/DOWN

ENTER

MARK

ARROW KEYS to

highlight BACKTRACK.

A route will be created and given a name in the format of BXXPxx. XX is

the BACKTRACK number and xx is the waypoint number ranging from 01

to 31. For example, your first backtrack will read B01P01. The backtrack

waypoints will be listed in the menu just as other waypoints.

BACKTRACK routes can be deleted like other routes but the waypoints in

the route will not be deleted.

CREATING A MULTI-LEG ROUTE

You may want to create a route with your saved waypoints.

CREATE

For example, if you want to create a route from your home,

to a campsite and then to a great fishing spot, you can create

a route that would take you to each place.

Use UP/DOWN

ARROW KEYS to

highlight ROUTES.

Use UP/DOWN

ARROW KEYS to

The Route

ENTER

MARK

menu appears.

highlight an empty route.

SAVE ROUTE

LEG

Use UP/DOWN

ARROW KEYS to

highlight CREATE.

A screen will appear

with the first dotted

line highlighted.

ENTER

MARK

ENTER

MARK

BRG

DST

A menu of all the

Use UP/DOWN ARROW

KEYS to highlight the category

the waypoint is located in.

ENTER

MARK

waypoints saved from the

selected category is displayed.

CREATE

HOME

Use UP/DOWN ARROW

KEYS to highlight the

first waypoint of your route.

Your receiver will display the waypoint you

just selected in the starting location and the

second dotted line will be highlighted.

ENTER

MARK

Continue the above

process until you have

completed the desired route.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight SAVE ROUTE.

SAVE ROUTE

LEG

Use UP/DOWN

ARROW KEYS to

highlight SAVE ROUTE.

ENTER

MARK

BRG

DST

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

VIEWING/EDITING A ROUTE

ACTIVATE

VIEW/EDIT

REVERSE

DELETE

You have the ability to view/edit routes that you have

created using waypoints stored in your receiver’s memory.

To view or edit a route, complete the following steps:

BACKTRACK

MAP VIEW

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight ROUTES.

ENTER

MARK

WAYPOINTS

ROUTES

SETUP

Use UP/DOWN ARROW

KEYS to highlight the

route you wish to edit.

Use UP/DOWN

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

ENTER

MARK

ARROW KEYS to

highlight VIEW/EDIT.

INSERTING A LEG

With the route you have created, from your home to a

VIEW/EDIT

HOME

CAMP

campsite, you can insert a leg in the route. For example, on

your way to the campsite, you find a stream that you want

to stop at on your way back. You can add the waypoint for

the stream to your route.

While viewing

the route you wish

to insert a leg into.

Use UP/DOWN ARROW KEYS

to highlight the waypoint that

you want to insert a leg before.

Use UP/DOWN

ARROW KEYS to

highlight INSERT.

SAVE ROUTE

LEG

BRG

DST

Use UP/DOWN ARROW

KEYS to highlight the category

the waypoint is located in.

Use UP/DOWN ARROW

KEYS to highlight the

10 ^N_M

ENTER

MARK

ENTER

MARK

ENTER

MARK

waypoint you want to insert.

CHANGING A WAYPOINT IN A ROUTE

Using your home to campsite route, you may decide that you want to go to

the fishing spot on the way to the campsite and not stop at the stream. You

can replace the waypoint representing the stream with the fishing spot.

While viewing

the route you wish

to change a wpt in.

Use UP/DOWN ARROW

KEYS to highlight the waypoint

that you want to change.

ENTER

MARK

Use UP/DOWN ARROW

KEYS to highlight the

waypoint you want to replace.

Use UP/DOWN ARROW

KEYS to highlight the category

the waypoint is located in.

ENTER

MARK

ENTER

MARK

ADDING A WAYPOINT AT THE END OF A ROUTE

You may be navigating using the home to campsite route and find a great

picnic spot. You want to add this to the end of your route.

While viewing

the route you wish

to add a wpt to the end of.

Use UP/DOWN ARROW

KEYS to highlight the first

available dotted line of the route.

ENTER

MARK

Use UP/DOWN ARROW

KEYS to highlight the category

the waypoint is located in.

Use UP/DOWN ARROW KEYS to

highlight the waypoint you want

to add to the end of your route.

ENTER

MARK

ENTER

MARK

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

DELETING A WAYPOINT IN A ROUTE

On your next trip while navigating from the home to

campsite route, you find the campsite has been closed. You

may want to delete the campsite leg from your route.

VIEW/EDIT

HOME

CAMP

While viewing

the route you wish

to delete a wpt from.

Use UP/DOWN ARROW

KEYS to highlight the wpt

you wish to delete.

SAVE ROUTE

LEG

Use UP/DOWN

ARROW KEYS to

highlight DELETE.

ENTER

MARK

BRG

DST

10 ^N_M

SAVING A ROUTE

Once you have made changes to your route, you will need to

save those changes.

INSERT

DELETE

REPLACE

SAVE ROUTE

While viewing

the route you

wish to save.

Use UP/DOWN

ARROW KEYS to

highlight SAVE ROUTE.

ENTER

MARK

WAYPOINTS

ROUTES

SETUP

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

Use UP/DOWN

ARROW KEYS to

highlight SAVE ROUTE.

ENTER

MARK

ACTIVATING/DEACTIVATING A ROUTE

While navigating in your route from home to campsite, you

may decide you want to activate (turn on) the home to

campsite route and begin navigating.

ACTIVATE

VIEW/EDIT

REVERSE

DELETE

BACKTRACK

MAP VIEW

To activate:

WAYPOINTS

ROUTES

SETUP

Use UP/DOWN ARROW

KEYS to highlight the

route you wish to activate.

Use UP/DOWN

ARROW KEYS to

highlight ROUTES.

ENTER

MARK

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

Use UP/DOWN

ENTER

MARK

ARROW KEYS to

highlight ACTIVATE.

While navigating in your route from home to campsite, you may decide you

want to deactivate (turn off) the route and return to it later.

To deactivate:

Use UP/DOWN ARROW

KEYS to highlight the

route you wish to deactivate.

Use UP/DOWN

ARROW KEYS to

highlight ROUTES.

ENTER

MARK

Use UP/DOWN

ENTER

MARK

ARROW KEYS to

highlight DEACTIVATE.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

REVERSING A ROUTE

Once you have reached the end of your route, you can

reverse the route to return home. For example,

Camp...Fish, goes from point A to B to C to D, reversed

would read from D to C to B to A and the title would read

Fish...Camp.

ROUTE MENU

TRACK ROUTE

FISH

....CAMP

EMPTY

Use UP/DOWN ARROW

KEYS to highlight the

Use UP/DOWN

ARROW KEYS to

highlight ROUTES.

ENTER

MARK

route you wish to reverse.

LEGS DISTANCE

Use UP/DOWN

ARROW KEYS to

highlight REVERSE.

The screen will display the

ROUTE MENU and the

waypoints in the titles will reverse.

20.5_M^N

ENTER

MARK

DELETING A ROUTE

After your last trip using your home to campsite route, you decide you no

longer want to visit those sites. You can delete the route from your receiver.

Use UP/DOWN ARROW

KEYS to highlight the

route you wish to delete.

Use UP/DOWN

ARROW KEYS to

highlight ROUTES.

ENTER

MARK

Use UP/DOWN

ARROW KEYS to

highlight DELETE.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

confirmation

ARROW KEYS to

screen appears.

highlight YES or NO.

USING MAP VIEW IN A ROUTE

While navigating in your route, you can view the entire route

in a small screen overview with the use of Map View.

ACTIVATE

VIEW/EDIT

REVERSE

DELETE

BACKTRACK

MAP VIEW

Use UP/DOWN ARROW

KEYS to highlight the

route you wish to view.

Use UP/DOWN

ARROW KEYS to

highlight ROUTES.

ENTER

MARK

WAYPOINTS

ROUTES

SETUP

Use UP/DOWN

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

ENTER

MARK

ARROW KEYS to

highlight MAP VIEW.

If your route is larger than the maximum allowable zoom scale, the route

will not be displayed on the MAP screen.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

WORKING WITH TRACKROUTE

ROUTE MENU

By activating the TrackRoute at the top of the ROUTE

MENU, you can navigate the track history stored in your

receiver’s memory. This turns the Track History logging

off to keep from overwriting track points in memory. The

top of the navigation screens will indicate TO: LEGXXXX

where XXXX is between 0 to 1200. As you navigate with

the receiver and pass individual track points, the legs will

switch and countdown until you reach LEG 0 which is your

final destination.

TRACK ROUTE

FISH

....CAMP

EMPTY

LEGS DISTANCE

20.5_M^N

You navigate from the first created track point to the last track point.

Deactivate. When TrackRoute is turned off, Track History logging begins.

The track points will be overwritten once the receiver records new position

fixes.

Reverse. This reverses the TrackRoute or the track in Track History.

Delete. This erases the track points in Track History.

Backtrack. This activates BACKTRACK Route by saving the Track

History as a 30 leg route and activating it.

If there are some track points that are very close to each other, the

receiver may appear to skip one of these legs.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

AUXILIARY FUNCTIONS

Working with Sun/Moon and Fish/Hunt

The Sun/Moon function displays solar and lunar calculations and the Fish/

Hunt function displays times for excellent and good Fishing/Hunting. The

default will be the current position unless the function is accessed from a

waypoint menu or waypoint information screen.

Working with Sun/Moon:

From

any NAV

screen.

Use UP/DOWN

ARROW KEYS to

highlight SUN/MOON.

SUN/MOON

ENTER

MARK

AT: POS

ON: 23MAR98

RISE/SET

You can change the

Use UP/DOWN ARROW

KEYS to highlight the

location (AT) field.

ENTER

MARK

location (AT) and/or the

SUN

date (ON) for this calculation.

RISE 06:55AM

SET 05:08PM

MOON

RISE 07:32PM

SET 01:49AM

PHASE

A list of

your saved

waypoints appears.

Use UP/DOWN ARROW

KEYS to highlight

the desired waypoint.

ENTER

MARK

KEYS to highlight

the desired category.

Use ARROW

KEYS to

enter the date.

Use UP/DOWN ARROW

KEYS to highlight

the date (ON) field.

ENTER

MARK

ENTER

MARK

ENTER

MARK

Working with Fish/Hunt:

SUN/MOON

AT: POS

ON: 23MAR98

From

Use UP/DOWN

ENTER

MARK

any NAV

ARROW KEYS to

screen.

highlight FISH/HUNT.

FISH/HUNT

EXCELLENT

FROM 06:15AM

07:45 AM

You can switch between the Sun/Moon and Fish/Hunt data

screens using the LEFT/RIGHT ARROWs. Also, you will

be able to edit the AT and ON fields that you previously

changed.

FROM 10:24PM

GOOD

FROM 04:12PM

FROM 06:37AM

TO 10:05AM

11:58PM

07:40PM

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Simulate Mode

The Simulate mode will help you become familiar with your receiver and

how it works by generating artificial position fixes. By utilizing Simulate,

the receiver will create a route and will continue until you end it. In order to

end and delete the route created, return to the window where you initiated

the mode and select OFF or power the receiver OFF. It is important to reset

the receiver to your current position and not the position that was created in

the Simulate mode.

SETUP

INITIALIZE

From

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

NAV SCREENS

COORD SYSTEM

MAP DATUM

ELEV MODE

TIME FORMAT

NAV UNITS

TEMP UNITS

NORTH REF

LIGHT TIMER

BEEPER

any NAV

screen.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight SIMULATE.

PERSONALIZE

CLEAR MEMORY

NMEA

BAUD RATE

SIMULATE

A pop-up menu will be displayed giving a list of options

consisting of OFF, AUTO and USER. Highlight OFF to turn

the Simulator mode OFF. Highlight AUTO to turn the

Simulator ON and set a simulated route.

WPTUSNEARMES

If USER is selected, you will be prompted to input COG and

press ENTER. Then input SOG and press ENTER to display

a simulate activated window. The default setting is OFF.

OFCFOG 000_M˚

SOG 025^K_T

Contrast

You may want to change the contrast of your receiver’s display. At times

you will need to darken the display or lighten it. Use the following

keystrokes to do this:

From

any NAV

screen.

WCPOTNNTARMAESST

OFF

Use UP/DOWN

ARROW KEYS to

highlight CONTRAST.

Use LEFT/RIGHT

ARROW KEYS to

adjust the contrast.

ENTER

MARK

ENTER

MARK

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Alarms/Messages

ACCESSING THE ALARM/MESSAGE MENU

While navigating, you may decide to set an alarm in your MAP 410. Your

receiver has five types of alarms: Anchor alarm, which will notify you when

your anchored boat has drifted; Arrival alarm, which will notify you when

you are within the arrival circle of your destination; XTE alarm, which will

notify you when you have gone off course; Proximity alarm which will

notify you when you are within the proximity of any waypoints you have

chosen; and GPS alarm which alerts you when your MAP 410 is receiving

poor GPS signals.

WPT NAMES

ATTENTION

From

any NAV

screen.

Use UP/DOWN

ARROW KEYS to

highlight ALARM/MSG.

WPT001 IS

OFF

WITHIN 100^F_T

ROCKS ON

LEFT

Use UP/DOWN

ARROW KEYS to

highlight your choice.

ENTER

MARK

ENTER

MARK

ANCHOR ALARM

The Anchor alarm will notify that you have moved from the set position.

For example, while boating, you can set your Anchor alarm. Once anchored,

if your boat begins to drift from the set position, a pop-up window will

appear to notify that you are moving.

WPT NAMES

ANCHOR

OFF

1O0N0FT

250FT

500FT

While viewing

the Alarm/

Use UP/DOWN

ARROW KEYS to

Message screen.

highlight ANCHOR ALARM.

Use UP/DOWN

ARROW KEYS to

highlight your choice.

ENTER

MARK

ENTER

MARK

The beeper will sound when the GPS position is at a distance greater than

the distance you have chosen. The alarm will sound until you turn it off or

the condition is corrected. The default setting is OFF.

ARRIVAL ALARM

The Arrival alarm will notify you when you are within the arrival circle of

the destination waypoint.

WPT NAMES

ARRIVAL

While viewing

the Alarm/

Message screen.

Use UP/DOWN

ARROW KEYS to

highlight ARRIVAL ALARM.

OFF

100FT

250FT

500FT

0.2 NM

0.5 NM

1.0 NM

Use UP/DOWN

ARROW KEYS to

highlight your choice.

ENTER

MARK

ENTER

MARK

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

The alarm will sound and a pop-up window will appear when the GPS

position is within the arrival circle distance you have chosen. The pop-up

window will display the arrival circle distance as well as any message you

have input for the waypoint. The alarm will sound until you turn it off. The

default is OFF.

CROSS TRACK ERROR (XTE) ALARM

The XTE (Cross Track Error) alarm will notify you when you have gone off

your set course.

WPT NAMES

XTE

While viewing

the Alarm/

Use UP/DOWN

ARROW KEYS to

OFF

100FT

Message screen.

highlight XTE ALARM.

250FT

500FT

0.2 NM

0.5 NM

1.0 NM

Use UP/DOWN

ARROW KEYS to

highlight your choice.

ENTER

MARK

ENTER

MARK

The alarm will sound when the GPS position is off your set course by the

distance you have chosen. The alarm will sound until you turn it off or the

condition is corrected. The default setting is OFF.

PROXIMITY ALARM

The Proximity alarm will sound when you are within the proximity of any

User waypoints you have chosen that are not on the active route or GOTO.

WPPRTONXAIMMIETYS

OFF

While viewing

the Alarm/

Message screen.

Use UP/DOWN ARROW

KEYS to highlight

PROXIMITY ALARM.

Use UP/DOWN ARROW

KEYS to highlight

your desired option.

ENTER

MARK

100FT

250FT

500FT

0.2 NM

0.5 NM

1.0 NM

The PROX WPTS screen

will be displayed for you

to insert proximity waypoints.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight the empty field.

Your saved

waypoints

will appear.

Use UP/DOWN

ARROW KEYS to

highlight a waypoint.

To continue this process,

use the DOWN ARROW

to make the next selection.

ENTER

MARK

PROX WPTS

REEF

ROCKS

WPT001

WPT002

When you have completed your

selection, use the UP/DOWN

ARROW KEYS to highlight SAVE WPTS.

ENTER

MARK

ENTER

MARK

Use UP/DOWN ARROW

KEYS to highlight

SAVE WPTS.

ENTER

MARK

SAVE WPTS

The alarm will sound and a pop-up window will appear

when the GPS position is within the proximity distance you

have chosen. The pop-up window will display the

proximity distance as well as any message you have inputted for the

waypoint. The alarm will sound until you turn it off. The default setting is

OFF.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Due to government imposed Selective Availability, the alarm settings

under 100 meters, may be in error unless you are using DGPS. Do

not rely on these settings for precise navigation.

GPS ALARM

At times, the GPS signals your MAP 410 receives are of poor quality and

affect the accuracy of your receiver. This alarm alerts you when your

receiver is receiving poor signals and it can be turned ON or OFF. The

default setting is OFF.

WPT NAMES

GPS ALARM

OFF

While viewing

the Alarm/

Message screen.

Use UP/DOWN

ARROW KEYS to

highlight GPS ALARM.

Use UP/DOWN

ARROW KEYS to

highlight your choice.

ENTER

MARK

ENTER

MARK

VIEWING THE ALARM/MSG MENU

DEFAULTS

CLEAR MSG

Use UP/DOWN

ARROW KEYS to

highlight ALARM/MSG.

ENTER

MARK

WAYPOINTS

ROUTES

SETUP

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

RE-SETTING ALARM DEFAULTS

After changing many of the alarm settings, you may want to

restore the alarm default settings.

WPT NAMES

DEFAULTS

While viewing

the Alarm/

Message screen.

Use UP/DOWN

ARROW KEYS to

highlight DEFAULTS.

ENTER

MARK

OFF

RESTORE

DEFAULT

SETTINGS?

A pop-up

confirmation

menu appears.

Use UP/DOWN

ARROW KEYS to

highlight YES.

YES

ENTER

MARK

CLEARING ALARM MESSAGES

The message buffer may become cluttered with information. You can use

the CLR MSG to delete the messages.

WPT NAMES

CLR MSG

While viewing

the Alarm/

Message screen.

Use UP/DOWN

ARROW KEYS to

highlight CLEAR MSG.

ENTER

MARK

OFF

CLEAR

ALL

MESSAGES?

YES

A pop-up

confirmation

menu appears.

Use UP/DOWN

ARROW KEYS to

highlight YES.

ENTER

MARK

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

CUSTOMIZING YOUR MAP 410

Setup

Setup allows you to initialize the receiver and set system

parameters to your preference.

COORD SYS

MAP DATUM

ELEV MODE

PROJECTION

TRIP RESET

WAYPOINTS

ROUTES

SETUP

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

SUN/MOON

FISH/HUNT

CONTRAST

ALARM/MSG

Initialization

By initializing your receiver, you establish the initial

position for the receiver. This will enable the receiver to

search the sky for available satellites. You will need to

reinitialize if you have travelled more than 300 miles while

the receiver is turned off.

SETUP

INITIALIZE

NAV SCREENS

COORD SYSTEM

MAP DATUM

ELEV MODE

TIME FORMAT

NAV UNITS

TEMP UNITS

NORTH REF

LIGHT TIMER

BEEPER

PERSONALIZE

CLEAR MEMORY

NMEA

BAUD RATE

SIMULATE

From

any NAV

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight INITIALIZE.

Refer to the Getting Started section for more details.

Enabling/Disabling the NAV Screens

You may find that you do not use one, or more, of the nine NAV screens

provided in the receiver. You have the option to disable NAV screens,

except for the SAT STATUS and POSITION screens.

From

any NAV

screen.

WPT NAMES

NAV 1

OFF

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

Use UP/DOWN

ARROW KEYS to

highlight NAV SCREENS.

ENTER

MARK

OFF

A pop-up

menu will

appear.

Use UP/DOWN

You will be

ENTER

MARK

ENTER

MARK

ARROW KEYS to

prompted for

highlight ON or OFF.

each NAV screen.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Coordinate System

A Coordinate System is provided for you. This option allows you to select

primary and secondary coordinates used for entering and viewing position

information. The most common is LAT/LON. You can choose from LAT/

LON, TD, UTM, OSGB, IRISH, SWISS, SWEDISH, FINNISH, FRENCH,

GERMAN, MGRS and USER GRID. The default primary coordinate

system will be Lat/Lon in Degrees/Minutes and the default secondary

coordinate system will be UTM.

WCOPOTRNDAMSYESS

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

Use UP/DOWN

ARROW KEYS to

highlight COORD SYS.

ENTER

MARK

OPRFFIMARY

OSENCONDARY

Use UP/DOWN

ARROW KEYS to

highlight your choice.

Use UP/DOWN ARROW

ENTER

MARK

ENTER

MARK

ENTER

MARK

KEYS to highlight

PRIMARY or SECONDARY.

If a format is required for the coordinate system you have

chosen, a pop-up menu will be displayed. Highlight your

selection and press ENTER.

WLPATTN/LAOMNES

ODFEFG/MIN.MM

ODNEG/MIN.MMM

DEG/MIN/SEC

You would generally want the receiver to use position coordinates in the

same map datum that is used by your maps. For example, the Irish Grid

uses the Irish datum, Finnish Grid uses the KKJ datum, Swedish Grid

uses the RT 90 datum and the Swiss Grid uses the Swiss datum.

Map Datum

You can change the datum the receiver uses to compute position coordinates.

You will want your receiver’s datum to match the datum on the map or chart

you are using. Use the map “legend” to determine the datum required for

the map or chart. If you are not using a map or chart or are unsure which

datum to use, select WGS84 (the default setting).

WMAPPT NDAMTUEMS

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

OPRFFIMARY

OSENCONDARY

Use UP/DOWN

Use UP/DOWN ARROW

KEYS to highlight

PRIMARY or SECONDARY.

ENTER

MARK

ARROW KEYS to

highlight MAP DATUM.

Use UP/DOWN ARROW

KEYS to highlight your

map datum of choice.

ENTER

MARK

ENTER

MARK

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Elevation Mode

You have the option of changing your elevation mode to 2D (2-

Dimensional) or 3D (3-Dimensional). You may find 2D useful if you know

the elevation of your position and the elevation will not change. For

example, if you are at sea level, you could use 2D because you know that

your elevation is zero. The default setting is 3D.

WELPETVNAATMIOENS

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

OFF

Use UP/DOWN

ARROW KEYS to

highlight ELEV MODE.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

WELPETVNAATMIOENS

If 3-D is selected, you will be returned

to the SETUP menu. If 2-D

is selected, complete the following.

Use the ARROW

KEYS to input

your elevation.

ENTER

MARK

OFF

0000FT

Time Format

You have the option of changing the format in which the time is given. Your

choices are LOCAL 24HR, LOCAL AM/PM and UTC.

TIME FORMAT

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

LOCAL 24HR

LOCAL AM/PM

UTC

Use UP/DOWN

ARROW KEYS to

highlight TIME FORMAT.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

If UTC is selected, the receiver will return to Setup. If LOCAL 24HR or

LOCAL AM/PM are selected, a pop-up menu will be displayed prompting

you to input the correct time. Use the ARROWs to input the time and press

ENTER.

Nav Units

You can choose the units of measure used by your receiver. NAV UNITS

gives you the options of MILES/MPH, NM/KNOTS and KM/KPH. Default

setting is MILES/MPH for land use in the United States and KM/KPH for

land use outside the United States. Default setting is NM/KNOTS for

marine use.

From

any

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

NAV UNITS

MILES/MPH

NM/KNOTS

KM/KPH

ENTER

MARK

screen.

Use UP/DOWN

ARROW KEYS to

highlight NAV UNITS.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Temperature Units

You have the ability to choose between FAHRENHEIT and CELSIUS when

setting the temperature units in your MAP 410.

TEMP UNITS

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

FAHRENHEIT

CELSIUS

Use UP/DOWN

ARROW KEYS to

highlight TEMP UNITS.

Use UP/DOWN ARROW

ENTER

MARK

ENTER

MARK

KEYS to highlight

FAHRENHEIT or CELSIUS.

North Reference

The MAP 410 uses magnetic north as a default reference for all navigation

computations. You can change this to true north (good, if you are using a

map) or back to magnetic north (default, good to use if you are using a

compass) under SETUP. The default setting is MAGNETIC.

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

WNOPRTTNHARMEEFS

OTRFUFE

OMNAGNETIC

Use UP/DOWN

ARROW KEYS to

highlight NORTH REF.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

Light Timer

The light timer is a power saving function that automatically turns the light

off. Once the light has been turned off by the timer, it can be turned on with

the next key press. For example, suppose you select the timer setting for 30

seconds. If you press the light key to turn the light on, it will remain lit for

30 seconds and then shut off automatically, as you had selected. With the

next key press, the light will turn on again for 30 seconds. This process will

continue until you press the light key again to turn the light off or turn the

receiver off. With the Light Timer function, you can choose the setting for

the light timer. You can choose from ALWAYS ON, 15 and 30 seconds, 1, 2

and 4 minutes.

LWIGPHTTNTAIMERS

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

OFF

ALWAYS ON

15 SECONDS

30 SECONDS

1 MINUTE

2 MINUTES

4 MINUTES

Use UP/DOWN

ARROW KEYS to

highlight LIGHT TIMER.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Beeper

You can select the options for when the beeper will sound. Your choices are

OFF, KEYS ONLY, ALARM ONLY and KEYS/ALARM. The default

setting is KEYS/ALARM.

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

BEEPER

OFF

ENTER

MARK

KEYS ONLY

ALARM ONLY

KEYS /ALARM

Use UP/DOWN

ARROW KEYS to

highlight BEEPER.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

Personalize

With the personalize function, you have the option of

inputting your name into the MAP 410 receiver.

PWERPSTONNAAMLEIZSE

THIS

MAP 410

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

Use UP/DOWN

UNIT IS THE

PERSONAL

PROPERTY

MICHAEL

SMIT

ENTER

MARK

ARROW KEYS to

highlight PERSONALIZE.

Use UP/DOWN

If turned ON, use

ENTER

MARK

ENTER

MARK

ENTER

MARK

ARROW KEYS to

the ARROW KEYS to

highlight ON or OFF.

input your information.

Clearing Memory

The Clear Memory function allows you to delete track history, backtrack

waypoints, waypoints and routes as well as reset defaults to the factory

defaults. There is also an option to delete everything in the receiver’s

memory. Use caution when accessing the Clear Memory function. Once

you have deleted, you cannot undo the process or retrieve this deleted

data.

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

CWLPETANRAMMEENSU

OFF

ENTER

MARK

TRACK HIST

WPT/ROUTES

BACK WPTS

ROUTES

RESET DFALT

ALL

Use UP/DOWN

ARROW KEYS to

highlight CLEAR MEMORY.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

If you select clear all memory, the receiver will clear all waypoints and

routes, restore the default settings and then power itself off. Non-User

waypoints will remain in your receiver’s memory.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

NMEA Setup

Your MAP 410 receiver can be set to output GPS data to interface with your

personal computer. You can select from OFF, V1.5 APA, V1.5 XTE and

V2.1 GSA. The default setting is OFF.

From

any

screen.

WPNTMNEAAMES

OFF

V1.5 APA

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

ENTER

MARK

OFF

V1.5 XTE

V2.1 GSA

Use UP/DOWN

ARROW KEYS to

highlight NMEA.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

Setting Baud Rate

Connection to external devices requires that the baud rate of the data being

sent or received by your MAP 410 be matched to the baud rate of the

external device. Your choices are 1200, 4800, 9600 and 19200 baud. The

default setting is 4800.

From

any

screen.

Use UP/DOWN

ARROW KEYS to

highlight SETUP.

WPT NAMES

BAUD RATE

1200 BAUD

OFF

ENTER

MARK

4800 BAUD

9600 BAUD

19200 BAUD

Use UP/DOWN

ARROW KEYS to

highlight BAUD RATE.

Use UP/DOWN

ENTER

MARK

ENTER

MARK

ARROW KEYS to

highlight your choice.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

TROUBLESHOOTING

Receiver will not turn on:

1. Check to see if batteries are installed correctly.

2. Replace with four new AA alkaline batteries.

Takes more than 10 minutes to get a position fix:

1. Make sure that the antenna is pointing up, has a clear view of the

sky and is a reasonable distance away from your body.

2. Check Sat Status to see where the satellites are and if the receiver

is acquiring data.

3. If the receiver still does not get a position fix within 10 minutes,

you may wish to repeat the initialization procedure.

Elevation jumps up and down:

1. Errors induced by the Department of Defense called Selective

Availability (SA) can cause the elevation values to fluctuate.

Battery life seems shorter than it should be:

1. Make sure that you are using four AA alkaline batteries.

2. Shorter life span of the batteries can be due to excessive use of the

backlight. Turn the backlight off when not needed.

Position coordinates on your receiver do not match the location on your

map.

1. Make sure that your receiver is set up to use the same datum as

your map. The map datum is generally shown in the map legend.

See Map Datum under Auxiliary Functions for instructions on

selecting the map datum in your receiver.

2. Check your LAT/LON format. Make sure that the format selected

in COORDINATE SYSTEM (DEG/MIN/SEC or DEG/MIN.MM)

is in the same format as the map you are using.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Commonly Asked Questions

Does the receiver adjust itself for daylight savings time?

No. You need to reset the time for changes in your area. (see Changing

Time Display).

Will my receiver function correctly in the year 2000?

Yes. Even though the last two digits of the year are displayed, the full

year designator is stored in memory.

Why won’t the receiver accept the coordinates I am inputting?

The most common cause is that you are trying to enter coordinates that

are in degrees/minutes while your receiver is set to degrees/minutes/

seconds. Because the last two digits in degrees/minutes is in

hundredths (00-99) and degrees/minutes/seconds can be no higher than

59 (00-59), inputting a number higher than 59 while in deg/min/sec

results in an error and the receiver does not accept the entry.

Can I use NiCad batteries in my MAP 410?

Yes. However, the battery life of your MAP 410 will be diminished as

well as the possibility of an incorrect reading on the battery life gauge

with the use of NiCad batteries.

Can I attach my MAP 410 to external power?

Yes. However, this requires the optional external power cable available

from your dealer or Magellan Corporation. See the Accessories section

of this manual for more information.

You say my receiver should work for 12 hours on four batteries, mine

doesn’t last that long?

There can be two reasons. The first, and most common, reason is that

you have the display backlight on. The light increases the drain on the

batteries causing the decrease in battery life. The second reason is that

you are using NiCad batteries. As mentioned before, while your MAP

410 will operate on NiCad batteries, the battery life is diminished.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Contacting Magellan

If after using the troubleshooting section, you are still unable to solve

your operation problems, please call Magellan’s Technical Service

at (800) 707-9971 or via e-mail at [email protected].

Representatives are available Monday through Friday from 7 AM to 5 PM,

PST. Faxes can be sent to Customer Service at (909) 394-7070.

If necessary, you can also return your unit to Magellan for repair (Please

call for assistance first). If possible, please notify us before shipping the

unit by Parcel Post or UPS, and include a description of the problem, your

name, address and a copy of your sales receipt. If your return shipping

address is different, please let us know.

Please return the enclosed registration card in order to have your

information on file.

With all correspondence, please state the model of your receiver and if

calling, please have your unit with you.

Packages should be sent to:

Magellan Corporation

960 Overland Court

San Dimas, CA 91773

ATTN: Warranty/Repair

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

COORDINATE SYSTEMS

Positions are locations that are described in a unique way so that one

location cannot be confused with another. This is done by using a coordinate

system to describe locations. Your Magellan receiver has the ability to use

any one of 12 different coordinates systems; LAT/LON (latitude and

longitude), UTM (Universal Transverse Mercator), OSGB, Irish Grid,

Finnish, German, French, MGRS, User Grid, Swiss Grid, TD or Swedish

Grid. The one you select (in SETUP) will be determined by the maps and

charts you use; you would generally want the receiver to display position

coordinates in the same system that is used by your maps.

LAT/LON Coordinate System. LAT/

LON is the most commonly used

00.00W

30.00N

coordinate system today. It projects lines

of latitude (parallels) and lines of longitude

(meridians) onto the earth’s surface. Lines

of latitude are the equator and the

tude

horizontal lines that are parallel to it. Lines

of longitude are the vertical lines that are

perpendicular to the equator and pass

through the poles. A position is described

as being the intersection of a line of

latitude and a line of longitude.

Specifically, a position is up to 90° north or south of the equator (up to the

poles, which are 90°N and 90°S; the equator is 0° latitude), and up to 180°

east or west of the Prime Meridian, which is 0° longitude. (The Prime

Meridian passes through Greenwich, England.) Parts of a degree are

minutes; there are 60 minutes (written as 60') to a degree. Minutes can also

be divided into smaller units. Fractions of a minute can be expressed as

decimals or as seconds. (There are 60 seconds to one minute, written as

60"). So a LAT/LON position coordinate can be expressed in two ways,

which your Magellan GPS receiver displays as 25°47.50 or 25°47’30.

UTM Coordinate System. Another commonly used coordinate system is

UTM (Universal Transverse Mercator), which is generally found on land-

based maps and quad sheets that are produced by government map

providers. On land, you may find that UTM coordinates are easier to use

than LAT/LON.

UTM coordinates are easy to use, but since the model it is based on is

somewhat abstract, this section is a very simplified introduction to UTM.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Instead of projecting an imaginary grid of intersecting lines onto the globe,

UTM projects sections of the globe onto a flat surface. Each of these

sections is called a “zone.” There are 60 zones to cover the entire earth

between 84°N and 80°S (polar areas are not described by UTM). Each zone

is 6° wide as projected from the earth’s center.

A UTM position is described by three elements; the zone it is in, the easting,

and the northing. Eastings and northings measure how far into a zone a

position is in meters. Eastings are an east/west measurement, and correspond

roughly to longitude. Northings are a north/south measurement, and

correspond to latitude.

180°

150°

120°

90°

60°

30°

0°

30°

60°

90°

120°

150°

180°

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

0°

3000 Km

3000 Mi.

Scale at the Equator.

NOTE: The area described by the UTM coordinate system extends to 84°N and to 80°S.

This chart shows the position of Magellan described in both LAT/LON and

UTM coordinates.

LAT/LON

UTM

DEG/MIN.MM

DEG/MIN/SEC

34 06.58N

117 49.56W

34 06’35”N

117 49’34”W

11 4 23 818 E

37 74 624 N

Time Delay Grids (TD). These are lines of position (LOPs) that are

determined by the difference in length of time required to receive the Loran-

C signals. Loran is a radio navigation aid and TD coordinates are clearly

marked on nautical charts. Our marine GPS units can display position

coordinates in TDs by converting from position fixes calculated in LAT/

LON. (No measurements are being made using Loran signals).

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Each Loran chain consists of one master station (designated as M) and two

or more secondary stations (W, X, Y and Z). The user determines which two

secondary stations will provide the most accurate position based on the

angle of intersection of the LOPs.

When TD is selected in SETUP (under COORD SYS) you will be asked to

input the following:

1. The GRI (also called the chain) that you will be navigating in.

2. The two secondary stations that will provide you with the best angle of

LOP intersections. If you have used Loran in the past, you should

simply enter the values you used before.

Other Coordinate Systems. OSGB coordinates are similar to UTMs, but

describe only Great Britain. They must be used with the GBR36 datum. This

coordinate system cannot be used in any other part of the world. The MAP

410 automatically selects the GBR36 datum when the OSGB coordinate

system is selected in Setup. (While OSGB coordinates must be used with the

GBR36 datum, the GBR36 datum can be used with LAT/LON coordinates;

just be sure the map you are using uses both LAT/LON and GBR36.)

If you select OSGB in the COORD SYS portion of the SETUP MENU,

be sure to change the map datum back to the one you will be using

(WGS84 is the default) when changing to another coordinate system.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

NMEA DATA MESSAGES

Your GPS receiver can be set to output GPS data in the NMEA 0183 version 1.5 or

version 2.1 format to interface with other marine devices or equipment.

NMEA DATA MESSAGES. NMEA data is output at 4800 baud, 8, N, 1, checksum

off.These settings are acceptable to most equipment and software applications. The

baud rate can also be set to 1200, 9600 or 19200.

There are several NMEA output message sets, each with a slightly different applica-

tion. Check documentation for your external equipment to choose the appropriate

message set.

SET

V1.5.APA BWC, APA, GLL, VTG

Remote displays, version 1.5 marine autopilots

V1.5 XTE XTE, BWC, GLL, VTG

Version 1.5 Marine autopilots

OUTPUT/USAGE

V2.1 GSA GSA, GSV, GLL, GGA, RMB, RMC, APB, and autopilots.

Vers. 2.1 NMEA recommended navigation data, satellite data

and autopilots.

NMEA Message Definitions

APA

Autopilot cross track error, direction to steer, status of GPS, route status,

destination waypoint name, and bearing from origin to destination (old

format).

APB

Revised autopilot message contains all of the above plus: heading to steer

toward destination, bearing from the present position to the destination

(magnetic or true).

BWC Range and bearing to a waypoint.

GGA GPS position, time, fix quality, number of satellites used, HDOP (Horizontal

Dilution of Precision), differential reference information, and age.

GLL

GSA

GPS-derived latitude, longitude, and time of fix.

GPS receiver operating mode, satellites used in the navigation solution

reported by the $--GGA sentence and DOP (Dilution of Precision) values.

GSV

Number of satellites in view, satellite numbers, elevation, azimuth, and SNR

value.

RMB Data status, cross track error, direction to steer, origin, destination landmark,

landmark location, bearing to destination, and velocity toward the destination.

RMC Time, latitude, longitude, speed, heading, and date.

VTG

Track (magnetic and true) and groundspeed (knots and KPH).

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

NMEA OUTPUT DATA FORMAT - VERSION 1.5

APA

Autopilot Format A

1 2 3 4 5 6 7 8

9 10

APA,A,A,X.XX,L,N,A,A,XXX.,M,CCC

1 OR’ed Blink and SNR (A = valid, V = invalid)

2 Cycle Lock (A = valid, V = invalid)

3-5Cross Track, Sense (L = steer left, R = steer Right), N.Mi.

Units

6-7Arrival Circle, Arrival Perpendicular (crossing of the line

which is perpendicular to the course line and which passes

through the destination waypoint.

8-9Bearing dest. WPT. from origin WPT., Magnetic

10 Dest WPT. identifier

BWC

To Selected Waypoint, Great Circle

3 4 5 6

BWC,XXXXXX,XXXX.XX,N,XXXXX.XX,W,XXX.,T,XXX.,M,XXX.X,N,CCCC

7 8

9 10

1112

UTC of Bearing

2-3 Lat, N or S of waypoint

4-5 Long, E or W of waypoint

6-7 Bearing, True

8-9 Bearing, Magnetic

10-11Distance, naut. miles

12 Waypoint identifier

GLL

Geographic Position — Latitude/Longitude

2 3 4 5

GLL,1111.11,a,yyyyy.yy,a,hhmmss.ss,A*hh

1-2

2-3

Latitude, N/S

Longitude, E/W

UTC of position

Status A = Data valid

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

VTG

Actual Track and Ground Speed (SPD)

2 3

4 5

6 7

VTG,XXX.,T,XXX.,M,XX.X,N,XX.X,K

1-2 Track degrees, True

3-4 Track degrees, Magnetic

5-6 Speed, knots

7-8 Speed, kilometers/hour

XTE

Cross Track Error

1 2 3 4 5

XTE, A,A,X.XX, L,N

Or’ed value Blink and SNR (A=Valid, V=Invalid)

Cycle Lock, (A=Valid, V=Invalid)

Cross Track Error

Steer Left of Right (L = Left, R = Right)

Units (N.Mi.)

NMEA 0183 VERSION 2.1

APB Autopilot Sentence “B”

1 2 3 4 5 6 7 8 9 10 11 12 13 14

APB,A,A,x.x,a,N,A,A,x.x,a,c—c,x.x,a,x.x,a*hh

Status: A = Data valid

V = Loran-C Blink or SNR warning

V = general warning flag for other

navigation systems when a

reliable fix is not available.

Status: V = Loran-C cycle lock warning flag

A = OK or not used

Magnitude of XTE

Direction to steer (L, R)

XTE units, nautical miles

6 Status: A = arrival circle entered

7 Status: A = perpendicular passed at waypoint

8-9 Bearing origin to destination, M/T

Destination waypoint ID

11-12 Bearing, present position to destination, Magnetic or True

13-14 Heading to steer to destination waypoint, Magnetic or True

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

GGA

Global Positioning System Fix Data

3 4

5 6 7 8 9 10 11

GGA,hhmmss.ss,1111.11,a,yyyyy.yy,a,x,xx,x.x,x.x,M,x.x,

12 13 14

M,x.x,xxxx*hh

UTC of Position

2-3 Latitude - N/S

4-5 Longitude - E/W

GPS Quality Indicator

0 = fix not available or invalid

1 = GPS SPS Mode, Fix valid

2 = Differential GPS, SPS Mode, fix valid

3 = GPS PPS Mode, fix valid

Number of satellites in use (00-12, may be different from

the number in view)

Horizontal dilution of precision

Antenna altitude above/below mean sea level

10 Units of antenna altitude, meters

11 Geoidal separation - difference between the WGS-84 earth

ellipsoid and mean sea level (geoid), “-” = mean sea level

below ellipsoid

12 Units of geoidal separation, meters.

13 Age of Differential GPS data - Time in seconds since last

SC104 Type 1 or 9 update, null field when DGPS is not used

14 Differential reference station ID, 0000-1023

GLL

Geographic Position — Latitude/Longitude

2 3 4 5

GLL,1111.11,a,yyyyy.yy,a,hhmmss.ss,A*hh

1-2

2-3

Latitude, N/S

Longitude, E/W

UTC of position

Status A = Data valid

V = Data not valid

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

GSA

GPS DOP and Active Satellites

GPS receiver operating mode, satelites used in the navigation

solution reported by the $--GGA sentence, and DOP values.

1 2 3

4 5 6 7

GSA,a,x,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,x.x,x.x,x.x*hh<CR><LF>,

Mode: M=Manual, forced to operate in 2D or 3D mode,

A=Automatic, allowed to automatically switch 2D/3D

Mode: 1= Fix not available, 2=2D, 3=3D

3-4 PRN numbers of satellites used in solution (null for unused

fields)

PDOP

HDOP

VDOP

GSV

GPS Satellites in View

Number of satellites (SV) in view, PRN numbers, elevation,

azimuth and SNR value. Four satellites maximum per transmis-

sion, additional satellite data sent in second or their mes-

sage. Total number of messages being transmitted and the

number of messages being transmitted is indicated in the first

two fields.

1 2 3 4 5 6 7

8 9 10

GSV,x,x,xx,xx,xx,xxx,xx..........xx,xx,xxx,xx*hh<CR><LF>

Total number of messages, 1 to 3

Message number, 1 to 3

Total numer of satellites in view

Satellite PRN number

Elevation, degrees, 90° maximum

Azimuth, degrees True, 000 to 359

SNR (C/No) 00-99 dB, null when not tracking

8-9 2nd-3rd SV

10-11 4th SV

Notes: 1) Satellite information may require the transmission

of multiple messages. The first field specifies the total

number of messages, minimum value 1. The second field identi-

fies the order of this message (message number), minimum value

2) A variable number of “PRN-Elevation-Azimuth-SNR” sets are

allowed up to a maximum of four sets per message. Null fields

are not required for unused sets when less than four sets are

transmitted.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

RMB Generic Navigation Information (immediately follows RMC)

1 2

RMB,A,X.XX,a,c--c,c--c,1111.11,a,yyyyy.yy,a,x.x,x.x,x.x,A *hh

Data Status (A = valid, V = invalid)

3 4

7 8

9 10 11 12 13 14

2-3 XTE, naut. miles and direction to steer (L or R) [If XTE

exceeds 9.99 NM, display 9.99 in field 2.]

Origin waypoint ID

Destination waypoint ID

6-7 Destination Waypoint Latitude (N or S)

8-9 Destination Waypoint Longitude (E or W)

10 Range naut. miles, present fix to destination waypoint

Great Circle. [If range exceeds 999.9 nm, display 999.9.]

11 Bearing, True, Great Circle, Present fix to dest. waypoint

12 Closing velocity to destination, knots

13 Arrival (OR’ed arrival circle and crossing of line which is

perpendicular to the course line and which passes through the

destination waypoint.)

14 CHECKSUM (Mandatory in this sentence.)

RMC Transit Specific (to be followed by RMB)

2 3

4 5

6 7

RMC,hhmmss.ss,A,1111.11,a,yyyyy.yy,a,x.x,x.x,xxxxxx,x.x,a *hh

Time, UTC of position fix

Status (A = valid, V = Navigation receiver warning)

3-4 Latitude at UTC time, N or S

5-6 Longitude at UTC time, E or W

Speed over ground, knots

Course over ground, degrees

Date (DDMMYY)

10 Magnetic variation, degrees

11 Magnetic variation, sense (E or W)

12 CHECKSUM (Mandatory in this sentence)

The formats listed are NMEA formats and Magellan receivers may not output all of the

information listed for a particular format.

A complete copy of the NMEA specifications can be obtained from:

NMEA, PO Box 3435 New Bern, NC 28564-3435

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

AVAILABLE DATUMS

Datum

WGS84

Full Name

World Geodetic System

Datum

INDIA

Full Name

Indian (India, Nepal)

NAD27

NAD83

ADIND

ALASK

ARC50

ARC60

ASTRO

AUS66

North America 1927

North American 1983

Adinda

Alaska

Arc 1950

IRAN

Iran

Ireland 1965

Kauai

Kertau 1948

KKJ (Finland)

Liberia 1964

Luzon

Massawa

Maui

IRELA

KAUAI

KERTA

KKJ

Arc 1960

LIBER

Camp Area Astro

Australian Geodetic 1966

Australian Geodetic 1984

Bogota Observatory

Bukit Rimpah

Campo Inchauspe

Canada

LUZON

MASSA

MAUI

AUS84

BOGOT

BUKIT

CAMPO

CANAD

CAPE

CARTH

CENAM

CHATH

CHUAA

CORRE

CYPRU

DJAKA

EGYPT

EUROP

MERCH

MINNA

MONTJ

NAHRW

OAHU

OEGYP

OHAWA

OMAN

PITCA

QATAR

QORNO

RT90

Merchich

Minna

Nahrwan, Saudi Arabia

Oahu

Old Egyption

Old Hawaiian

Oman

Pitcairn Astro 1967

Qatar National

Qornoq

Cape

Carthage

Central America

Chatham 1971

Chau Astro

Corrego Alegre

Cyprus

Djakarta (Batavia)

Egypt

European 1950 (All of

Europe)

European 1950 (W. Eu-

rope)

European 1979

Gandajika Base

Geodetic Datum 1949

RT90 (Sweden)

Provisional So. Am. 1956

South American 1969

Schwarzeck

SAM56

SAM69

SCHWA

SICIL

SIERR

SWISS

TANAN

EUR50

Sicily

EUR79

GANDA

GEO49

GHANA

GRB36

Tananarive Observatory

1925

Indian (Thailand,

Vietnam)

Timbalai

Tokyo

THAI

Ordinance Survey of GB,

1936

Guam

TIMBA

TOKYO

USER DEFINED

VOIRO

GUAM

GUNSG

GUNSR

HAWAI

HERAT

HJORS

HUTZU

G. Segara

Hawaii

WGS72

World Geodetic System

1972

Yacare

Zanderij

Herat North

Hjorsey 1955

Hu-tzu-shan

YACAR

ZANDE

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

CHARACTERISTICS

Performance

Receiver:

12-channel technology, tracks up to 12 satellites to

compute and update information with detachable

quadrifilar antenna.

Acquisition times (under optional conditions)

Warm:

Cold:

Approximately 15 seconds

Approximately 1 minute

Update Rate: 1 second continuous

Accuracy

Position:

49 feet (15 meters) RMS (with Selective Availability

turned off)

Velocity:

0.1 knot RMS steady state (with Selective

Availability turned off)

Limits

Speed:

951 mph

Altitude:

17,500 meters

Physical

Size:

6.88” x 2.5” x 1.1” [h] x [w] x [d]

Weight:

12 ounces (340.2 grams) with 4 AA batteries installed

2.75” x 1.5” [h] x [w]

Display:

Housing:

Temp. Range

Operating:

Storage:

Weatherproof construction, wraparound rubber armor

14˚F to 140˚F to (-10˚C to 60˚C)

-40˚F to 167˚F (-40˚C to 75˚C)

Power

Source:

4 AA alkaline batteries or 9-35 VDC with optional

power cable

Battery Life: Up to 12 hours continuous operation

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

ACCESSORIES

Accessories for your MAP 410 are available from your Magellan dealer or

you can order directly from Magellan using the order card supplied with

your receiver or call Magellan at (800) 669-4477.

Swivel Mounting Bracket: Mounts the receiver on a dashboard or other

surface, allowing for hands-free operation.

Vehicle Mounting Bracket: Mounts the receiver on the windshield,

allowing for hands-free operation.

Nylon Carrying Case: The carrying case protects your receiver from the

elements and allows you to carry your receiver on your belt.

Power/Data Cable: Allows you to connect your receiver to external power

and data.

PC Interface Cable: Connects your receiver to your PC for data transfer.

PC Interface Cable with Cigarette Lighter Adapter: Connects your

receiver to your PC for data transfer and to a cigarette lighter for external

power.

External Power Cable with Cigarette Lighter Adapter: Allows you to

connect the receiver to a cigarette lighter for external power.

MapSend™ CD-ROM: PC software program that transfers C-MAP NT

Compact marine charts between your GPS receiver and a PC (PC cable not

included).

Instructional Video: A video in VHS format that provides you with

instructions on how to use and operate your receiver.

Detachable Remote Antenna Kit: This kit contains all necessary hardware

to attach your receiver to an external antenna for use when the receiver will

be indoors while boating or driving.

Low Profile External Antenna: This antenna connects to your receiver

when the receiver’s antenna has been removed.

Magellan GPS Topo-Guide: Easily pinpoint your position on UTM Maps.

Includes topo map symbols, abbreviations, GPS landmark log and THE

CARD in: 1:24, 000/1:25, 000/1:63, 360 UTM Scales.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Differential Beacon Receiver (DBR-3): Connects to your receiver to

receive differential corrections for 5-10 meter accuracy.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

GLOSSARY

Active Leg

Altitude

BRG

The segment of a route currently being travelled.

The current elevation above sea level.

Bearing. The compass direction from your position

to a destination, measured to the nearest degree.

CDI

Course Deviation Indicator. A graphical representa-

tion of your position relative to your planned course,

giving you an indication of how far left or right of the

planned course you are and how to get to the destina-

tion.

COG

Course Over Ground. The direction the receiver is

moving. COG can be reported in true or magnetic

north values.

Coordinates

CTS

A unique numeric or alphanumeric description of the

position.

Course to Steer. The direction you should be

travelling in order to return to the course while

proceeding towards the destination. It is a “compro-

mise” course bearing that projects from your current

position to a point on the courseline mid-way

between a point perpendicular to your position and

the current leg destination waypoint.

Datum

Refers to the theoretical mathematical model of the

earth’s sea level surface. Map makers may use a

different model to chart their maps, so position

coordinates will differ from one datum to another.

The datum for the map you are using can be found in

the legend of the map.

Default

The value or setting automatically chosen by the unit

unless otherwise directed. Can be changed in Setup.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

DST

ETA

Distance. Distance from position to destination.

Estimated Time of Arrival. The estimated time of

day the leg’s destination waypoint will be reached.

ETE

Estimated Time Enroute. The estimated time

remaining to reach the next waypoint in a route.

HDG

Heading. The direction you are facing, defined as an

angle from North.

Latitude

The angular distance north or south of the equator

measured by lines encircling the earth parallel to the

equator from 0˚ to 90˚.

LAT/LON

Coordinate system using latitude and longitude

coordinates to define a position on the earth.

Leg (Route)

A segment of a route that has a starting (FROM)

waypoint and a destination (TO) waypoint. A route

may consist of 1 or more legs. A route that is from

waypoint A to waypoint B to waypoint C to waypoint

D has three legs with the first being from waypoint A

to waypoint B.

LMK

Landmark. A location saved in the unit’s memory

which is obtained by entering data, editing data,

calculating data or saving a current position. Used to

create routes. Same as a waypoint.

Longitude

The angular distance east or west of the prime

meridian (Greenwich Meridian) as measured by lines

perpendicular to the parallels and converging at the

poles from 0˚to 180˚.

Magnetic North

NMEA

The direction relative to a magnetic compass.

National Marine Electronics Association. A profes-

sional organization that defines and maintains the

standard serial format used by marine electronic

navigation equipment and computer interfaces.

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

OSGB

A coordinate system describing only Great Britain,

similar to UTMs. Used with GRB36 datum.

Position fix

SOG

Position coordinates as computed by the MAP 410.

Speed Over Ground. The speed at which the receiver

is moving.

TMP

Temperature.

True North

The direction to North Pole from an observer’s

position. The north direction on any geographical

meridian.

TTG

Time To Go. The measurement of how long it will

take you to arrive at your destination. TTG is based

on how fast you are moving towards the destination

and the distance remaining.

UTC

Universal Time Coordinated. Formerly referred to as

Greenwich Mean Time (GMT).

UTM

Universal Transverse Mercator metric grid system

used on most large and intermediate scale land

topographic charts and maps.

VMG

WPT

Velocity Made Good. The component of the velocity

that is in the direction of the destination.

Waypoint. A location saved in the receiver’s memory

which is obtained by entering data, editing data,

calculating data or saving a current position. Used to

create routes.

XTE

Cross Track Error. The perpendicular distance

between the present position and the courseline.

Given as a distance, right or left, of course when

facing the destination.

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

Accessories 66

Accuracy 3

Alarms 43

accessing 43

anchor 43

arrival 43

clearing 45

cross track error 44

gps 45

proximity 44

viewing 45

Altimeter 3

Antenna

signal reception 7

Auxiliary Functions 41

alarm/messages 43

contrast 42

fish/hunt 41

simulate mode 42

sun/moon 41

Averaging 13

Backtrack Routes 36

Batteries 3

installing 6

NiCad 53

troubleshooting 52, 53

Baud Rate 51

Bearing 14, 16, 22, 26, 68

Beeper 50

Borders

state 17

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Cartography 17

legend 17

interstate highway 17

large city 17

major city 17

medium city 17

railroad tracks 17

small city 17

state border 17

Cities

large 17

major 17

medium 17

scales 20

small 17

Clear Memory 50

Compass Screen 15

customizing 16

Contrast 42

Coordinate Systems 47, 55

secondary 13

Course Over Ground (COG) 14, 15, 16, 22, 68

Course Projection 19

Cross Track Error (XTE) 14, 16, 70

Customizing 46

beeper 50

clear memory 50

coordinate system 47

disabling the NAV screens 46

elevation mode 48

Initializing 46

light timer 49

map datum 47

NAV units 48

north reference 49

personalize 50

setting baud rate 51

Setup 46

time format 48

Data Window 22

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Elevation Mode 48

Fish/Hunt 41

GOTO Route 34

clearing 35

using find 35

Highways

interstate 17

scales 20

Initializing 8, 46

Keys 5

Light Timer 49

Magnetic North 49

Man Over Board (MOB) Route 35

clearing 35

Map Datum 47, 64

Map Screen 17

accessing waypoints 25

cartographic legend 17

course projection 19

data window 22

hide/show data 22

map find 24

orientation 19

panning 24

route display 24

scale 24

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

setup 18

track history 23

waypoint display 21

Map Setup 18

cities 20

course projection 19

highways 20

lat/lon grid 19

map text 20

railroads 21

screen orientation 19

waypoint scales 21

Map Text

enable/disable 20

MapSend™ CD 30, 66

Multi-Leg Routes

creating 36

NAV 1 Screen 14

customizing 14

NAV 2 Screen 16

customizing 16

NAV Screens 11

disabling 46

NAV Units 48

NMEA 51, 58

setup 51

North Reference 49

NorthFinder™ 15

Odometer Reset 27

Operating Modes 9

Personalize 50

Position Fix 9

Position Screen 13

averaging 13

viewing secondary coordinate systems 13

Power Up 11

Primary Usage 9

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Projection 19

Railroad Tracks 17

Railroads

scales 21

Receiver Description 3

Road Screen 25

customizing 26

Routes 34

activating/deactivating a route 38

adding a waypoint at the end of a route 37

changing a waypoint in a route 37

deleting a route 39

deleting a waypoint in a route 38

inserting a leg in a route 37

menu 34

reversing a route 39

saving changes to a route 38

TrackRoute 40

using map view in a route 39

view/edit 37

Sat Status Screen 11

setting temperature calibration 12

setting temperature units 12

Scale 24

Setup 46

Simulate Mode 42

Specifications 65

Speed Average 27

Speed Over Ground (SOG) 14, 16, 22, 70

Speed Screen 26

resetting odometer 27

resetting trip odometer 27

setting speed average 27

Sun/Moon 41

Magellan_DM_owA_nP_loa4_d10_froG_mP_WS_wR_we_.Sc_oe_miv_ae_nr_{uals.com. All Manuals Search And Download.}

Time Format 48

Time Screen 27

selecting format 28

Track Clear 23

Track History 23

TrackRoute 40

Trip Odometer Reset 27

Troubleshooting 52

UTM Coordinate System 55

Waypoint (WPT) 29

create 30

deleting 32

edit 30

editing waypoint fields 31

find 33

messages 31

non-user 30

projecting 32

saving 10, 30

saving changes to a waypoint 32

saving waypoint with receiver-generated name 30

saving waypoint with user-created name 30

selecting category 29

sorting 33

user 29

waypoint menu 29

XTE. See Cross Track Error (XTE)

Magellan MAP 410 GPS Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Magellan Corporation

Limited Warranty

All Magellan GPS receivers are navigational aids and are not intended to replace

other methods of navigation. Purchaser is advised to perform careful position

charting and use good judgement. Read the User Manual carefully before

using this product.

1. MAGELLAN CORPORATION WARRANTY

Magellan Corporation warrants their GPS receiver and accessories to be free of

defects in material and workmanship for a period of one year from the date of

original purchase. This warranty applies only to the original purchaser of

this product.

In the event of a defect, Magellan Corporation will, at its option, repair or

replace the product with no charge to the purchaser for parts or labor. The

repaired or replaced product will be warranted for ninety (90) days from the date

of return shipment, or for the balance of the original warranty, whichever is

longer.

2. PURCHASER'S REMEDY

Purchaser's Exclusive Remedy under this written warranty or any implied

warranty shall be limited to the repair or replacement, at Magellan Corporation's

option, of any defective part of the receiver or accessories which are covered by

this warranty. Repairs under this warranty shall only be made at an authorized

Magellan Service Center.

3. PURCHASER'S DUTIES

To obtain warranty service, the purchaser must return the receiver or accessories

postpaid, with proof of the date of original purchase and purchaser's return

address to Magellan Authorized Service Centers.

Magellan Corporation will not be responsible for any losses or damage to the

product incurred while the product is in transit or is being shipped for repair.

Insurance is recommended.

4. LIMITATION OF IMPLIED WARRANTIES

Except as set forth in item 1 above, all other expressed or implied warranties,

including those of fitness for any particular purpose and merchantability, are

hereby disclaimed.

Some states do not allow limitations on warranties, so the above limitation may

not apply to you.

5. EXCLUSIONS

This warranty does not cover the following:

• Installation

• Batteries

• Finishes

• Defects resulting from installation

• Any damage due to accident, resulting from inaccurate satellite transmissions.

Inaccurate transmissions can occur due to changes in the position, health, or

geometry of a satellite.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Any damage due to shipping, misuse, negligence or tampering, or improper

use.

• Servicing performed or attempted by anyone other than an authorized

Magellan Service Center representative.

• Modifications to the receiver which may be required due to any change in the

Global Positioning System (GPS). [Note: All Magellan GPS receivers use

GPS to obtain position, velocity, and time information. GPS is operated by

the U.S. Government, which is solely responsible for its accuracy and

maintenance. Certain conditions can cause inaccuracies which could require

modifications to the receiver. Examples of such conditions include but are

not limited to changes in the GPS transmission. Such modifications are not

covered by this warranty.]

Opening of this product by anyone other than an Authorized Magellan

Service Center representative will void this warranty.

6. EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES

Magellan Corporation shall not be liable to purchaser or any other person for

any incidental, special, indirect, or consequential damages whatsoever, including

but not limited to lost profits, damages resulting from delay or loss of use, loss

of or damages arising out of the use or inability to use this product, or breach of

this warranty even though caused by negligence or other fault. In no event will

Magellan Corporation be responsible for such damages, even if Magellan

Corporation has been advised of the possibility of such damages.

Some states do not allow the exclusion or limitation of incidental or consequen-

tial damages, so the above limitation or exclusion may not apply to you.

7. MERGER

This written warranty is the complete, final, and exclusive agreement between

Magellan Corporation and the purchaser with respect to the quality of perfor-

mance of all the goods and any and all warranties and representations. This

warranty sets forth all of Magellan Corporation's responsibilities regarding

this product.

This warranty gives you specific legal rights and you may also have other rights

which vary from state to state.

8. FOR PURCHASERS OUTSIDE OF THE UNITED STATES

This warranty gives you specific rights. You may have other rights which

vary from province to province and certain limitations contained in this

limited warranty may not apply to you.

If you purchased this product outside of the United States, this limited warranty

is governed by the laws of the State of California and shall benefit Magellan

Corporation, its successors, and assigns.

For further information concerning this limited warranty, please call or write:

Magellan Corporation

960 Overland Court

San Dimas, California, 91773

Phone: (909) 394-5000 FAX: (909) 394-7050

Download from Www.Somanuals.com. All Manuals Search And Download.

960 Overland Court, San Dimas, CA 91773

(909)394-5000

630319 A

Download from Www.Somanuals.com. All Manuals Search And Download.

LG Electronics Air Conditioner TS C092YDA0 User Manual
LG Electronics CRT Television 22LE5300 User Manual
Locke Lawn Mower TRM 3083 User Manual
LST Smoke Alarm IM 10 User Manual
Magnavox CD Player MCS220 User Manual
Marshall Amplification Stereo Amplifier DBS 7200 User Manual
Marvel Industries Refrigerator 8SBAR User Manual
Metra Electronics Automobile Accessories 99 5716 User Manual
METRObility Optical Systems Network Card R111 12 User Manual
MicroBoards Technology Label Maker GX Disc Printer User Manual