Smart Wireless
PCI Adapter 802.11b (95-20)
User Guide
100-409-01
Copyright © 2002 Madge Networks. All rights reserved.
20 Jul 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1.1 Features .......................................................................................................................................... 1
Hardware Requirements................................................................................................................. 2
Inserting the Madge PCMCIA 802.11b Adapter................................................................................... 3
100-409-01
Copyright © 2002 Madge Networks. All rights reserved.
Page ii
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
The Madge PCI adapter (95-20) is a high-performance PCI-to-PC Card adapter, which supports one PC
Card socket. It is compliant with the 16-bit PC Card specification defined in PCMCIA Release 2.1/JEIDA
4.1 and 32-bit CardBus; it can support any 8-bit/16-bit/32-bit PC Card in one socket, powered at
3.3V/5.0V as required.
The PCI adapter provides a rich set of features, which make it a good choice for bridging between PCI
and PC Card in desktop computers. Unique software configurable interrupt routing circuitry and
necessary driver software are provided together for the PCI adapter to serve IO cards requiring “IRQ
steering” functionality from the socket. These capabilities enable the PCI adapter to support almost all PC
Card applications including: SRAM cards, Linear Flash cards, ATA cards, Modem cards and LAN cards.
The PCI adapter is an ideal partner for the Madge 802.11b PCMCIA wireless LAN adapter (95-31).
1.1 Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Supports 16-bit (PCMCIA 2.1/JEIDA 4.1) and 32-bit (CardBus) PC Card.
One rear access PC Card socket.
PCI Local Bus Specification Revision 2.1 compliant.
PC Card Standard 95/97 compliant.
3.3V/5.0V operation.
Intel 82365SL register compatible, ExCA compatible.
Supports IRQ steering; software driver provided.
Ideal for data transfer or backup between desktop PC and mobile computer.
The PCI adapter provides one rear PC Card socket that is capable of accepting Type I, Type II or Type III
PC Cards.
2
Package Contents
The following items should be found in the package you have purchased:
ꢁ
ꢁ
One Madge PCI adapter (95-20)
A CD-ROM containing documentation and drivers
The CD-ROM also contains information on other Madge Smart Wireless products.
NOTE: Please contact your local dealer if anything is missing.
100-409-01
Copyright © 2002 Madge Networks. All rights reserved.
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
3
System Requirements
3.1 Hardware Requirements
ꢀ
ꢀ
IBM PC Compatible Computer
One free PCI Expansion Slot
3.2 Software Requirements
The PCI adapter is compatible with the following operating systems:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Microsoft Windows 98
Microsoft Windows 98SE
Microsoft Windows Me
Microsoft Windows 2000
Microsoft Windows XP
4
Software Setup
NOTE: If your system is Windows XP, you can skip this chapter.
1. Power on your computer with Windows 98/98SE/Me/2000.
2. Insert the accompanying CD-ROM into the CD-ROM drive of your computer.
3. A license agreement dialog box appears. If you agree, click Accept to continue.
4. The following dialog box appears for you to choose what to do:
5. Click Install utilities and drivers, the following dialog will appear:
100-409-01
Copyright © 2002 Madge Networks. All rights reserved.
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click the Install driver for PCI Adapter 802.11b (95-20) link to run the setup program. Now go to
Step 9.
7. If the AutoPlay capability of the CD-ROM drive is disabled, click the Start button on the taskbar,
click Run, and then the Run dialog box appears.
8. In the Open text box, type in D:\Setup.exe (where D: is the CD-ROM drive letter) to run the above
setup program. Now go to step 5.
9. The welcome dialog box appears. Click Next to continue.
10. The Software License Agreement dialog box appears. Read through the Software License
Agreement, and then click Yes.
11. The setup program will automatically identify the running system, install corresponding software, and
configure your system for the PCI adapter.
12. Following the completion of software driver setup, the Setup Complete dialog box appears.
13. Click Finish to complete the software setup.
5
Hardware Setup
After software setup, follow the steps below to install your PCI adapter hardware.
1. Before installing your PCI adapter, power off your computer and remove the power plug from the
wall outlet.
2. Remove the cover of your computer. For instructions on removing the cover, refer to the manual
provided the vendor of your computer.
3. Install the PCI adapter into a free PCI slot and utilize the mounting screw to secure the PCI adapter in
place.
4. Re-place and secure the cover of your computer.
5. Re-connect the power plug back to the wall outlet and power on your computer.
6
Inserting the Madge PCMCIA 802.11b Adapter
It is important to insert any PC Card correctly into the PCI adapter. Do not use excessive force. The PCI
adapter is supplied with warning labels to show the correct insertion of a Madge PCMCIA 802.11b
100-409-01
Copyright © 2002 Madge Networks. All rights reserved.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
wireless LAN adapter. The front of the PCMCIA adapter (which has the LED and “Smart Wireless”
label on it) must be inserted such that it is next to the PCI adapter’s circuit board as follows:
7
Specification
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
PCI Local Bus Specification Revision 2.1 compliant.
PCMCIA 2.1, JEIDA 4.1, and CardBus compliant.
3.3V/5.0V operation.
Intel 82365SL register compatible, ExCA compatible.
ATA disk interface support.
Supports Hot-Swapping—inserting and removing a PC Card without shutting down system.
Power saving suspend mode support.
Ambient temperature under bias 0oC to 70oC.
Storage temperature –65oC to 150oC.
PCI-to-PCMCIA host bridge R5C475 II.
Max. Power Supply on sockets VCC at 3.3V for 1A and VCC at 5.0V for 1A.
8
Troubleshooting
If your computer is COMPAQ DeskPro EN series, you may encounter the following problem:
System freezes while booting up after installing PCI adapter in the computer.
Solution:
ꢀ
ꢀ
ꢀ
Before installing the PCI adapter, please go to http://www.compaq.com/
Download the latest version of ROMPaq ROM Image (V2.11 or later), then follow the instructions
COMPAQ provides to update the system BIOS. You can install the software and hardware of PCI
adapter without problems after a BIOS update.
NOTE: only gentle effort is required to insert a PC card into the PCI adapter. If you have a problem
inserting a PC Card into the socket, please do not force the card, because it may cause unexpected
damage to the PC card or PCI adapter.
If you have any further questions, please contact your local dealer.
100-409-01
Copyright © 2002 Madge Networks. All rights reserved.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
|