Version 1.0
Reference Manual
D AD 3220 B
Dual Digital Audio Distribution Amplifier
D AD 3220
AES in 2
AES in 1
OUT 2.1
OUT 1.1
OUT 2.2
OUT 1.2
OUT 2.3
OUT 1.3
made in Germany
OUT 2.4
OUT 1.4
© LYNX Technik AG
Sandstraße 7
64404 Bickenbach
Germany
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Warranty
LYNX Technik AG warrants that the product will be free from
defects in materials and workmanship for a period of two (2)
years from the date of shipment. If this product proves defective
during the warranty period, LYNX Technik AG at its option will
either repair the defective product without charge for parts and
labor, or will provide a replacement in exchange for the
defective product.
In order to obtain service under this warranty, customer must
notify LYNX Technik of the defect before expiration of the
warranty period and make suitable arrangements for the
performance of service. Customer shall be responsible for
packaging and shipping the defective product to the service
center designated by LYNX Technik, with shipping charges
prepaid. LYNX Technik shall pay for the return of the product to
the customer if the shipment is within the country which the LYNX
Technik service center is located. Customer shall be responsible
for payment of all shipping charges, duties, taxes and any other
charges for products returned to any other locations.
This warranty shall not apply to any defect, failure, or damage
caused by improper use or improper or inadequate
maintenance and care. LYNX Technik shall not be obligated to
furnish service under this warranty a) to repair damage resulting
from attempts by personnel other than LYNX Technik
representatives to install, repair or service the product; b) to
repair damage resulting from improper use or connection to
incompatible equipment; c) to repair any damage or
malfunction caused by the use of non LYNX Technik supplies; or
d) to service a product which has been modified or integrated
with other products when the effect of such modification or
integration increases the time or difficulty servicing the product.
THIS WARRANTY IS GIVEN BY LYNX TECHNIK WITH RESPECT TO THIS
PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR
IMPLIED. LYNX TECHNIK AND ITS VENDORS DISCLAIM ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. LYNX TECHNIK`S RESPONISIBILITY TO REPAIR AND
REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE
REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS
WARRANTY. LYNX TECHNIK AND ITS VENDORS WILL NOT BE LIABLE
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTAL
DAMAGES IRRESPECTIVE OF WHETHER LYNX TECHNIK OR THE
VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Regulatory information
Europe
Declaration of Conformity
We
LYNX Technik AG
Sandstrasse 7
D-64404 Bickenbach
Germany
Declare under our sole responsibility that the product
TYPE: D AD 3220 B
To which this declaration relates is in conformity with the following
standards:
EN 55103-1 /1996
EN 55103-2 /1996
EN 60950 /1997
Following the provisions of 89/336/EEC and 73/23/EEC directives.
Winfried Deckelmann
Bickenbach, January 2003
Place and date of issue
Legal Signature
USA
FCC 47 Part 15
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to the part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Contents
Warranty ..............................................................................................................3
Regulatory information ......................................................................................4
Europe................................................................................................................4
Declaration of Conformity........................................................................4
USA .....................................................................................................................4
FCC 47 Part 15.............................................................................................4
Contents ..............................................................................................................5
Getting Started....................................................................................................7
Packaging.........................................................................................................7
Product Description.........................................................................................7
Functional Diagram.........................................................................................8
Module Layout .................................................................................................8
Connections......................................................................................................10
Audio / Video Connections .........................................................................10
Power Connections .......................................................................................11
DC Power Connector ..............................................................................11
Installation .........................................................................................................12
Mechanical.....................................................................................................12
Stand Alone Operation ...........................................................................12
Multiple Units..............................................................................................13
Electrical Installation......................................................................................14
Stand Alone Operation ...........................................................................14
Multiple Units..............................................................................................15
Settings and Control.........................................................................................15
Switch Settings................................................................................................15
Switch Function Detail .............................................................................16
Factory Preset Condition.........................................................................17
Auto Store..................................................................................................17
Alarm/LED Status Indicators .........................................................................18
Module Edge Status LED .........................................................................18
Locate Function........................................................................................19
Specifications (D AD 3220 B)...........................................................................20
Available Options.............................................................................................21
Parts List..............................................................................................................22
Service ...............................................................................................................22
Contact Information.........................................................................................23
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
This Page is intentionally left blank
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Getting Started
Packaging
The shipping carton and packaging materials
provide protection for the module during transit.
Please retain the shipping cartons in case
subsequent shipping of the product becomes
necessary.
Product Description
The D AD 3220 B is a high quality AES audio
distribution amplifier designed primarily for
broadcast and professional applications.
Flexible configurations allow the D AD 3220 B to be
used in dual 1 to 4 applications or 1 to 8
applications. Each AES input can have
independent sample rates ranging from 32KHz to
108KHz.
Channel status LED`s are provided as well as a front
side alarm LED. This version of the module features
BNC 75 Ohm connections designed for AES3-id
signals.
The D AD 3220 B is part of the 3000 series of
MiniModules, which offer high quality, modularity
and flexibility in a very small form factor ideal for
applications where space is at a premium.
The modules can be used either stand alone using
the optional power supply brick, or as part of a
tightly integrated space saving system where up to
10 MiniModules can be mounted utilizing the
optional LYNX R FR 3005 / 3010 rack housing. This
includes integrated power supply and optional
remote control interfaces.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Functional Diagram
Figure 1 below is the basic functional diagram for
the D AD 3220 B MiniModule.
OUT 1.1
OUT 1.2
AES IN 1
Status
Monitoring
OUT 1.3
OUT 1.4
OUT 2.1
AES IN 2
Status
Monitoring
OUT 2.2
OUT 2.3
OUT 2.4
Remote
Control
Micro Controller
Status
Status
Alarm
Switch
Figure 1- D AD 3220 B Functional Diagram
Module Layout
Figure 2 shows the physical layout of the D AD 3220
B MiniModule. AES audio I/O is made through
standard 75 Ohm BNC video connections. (AES3id)
Module configuration is set via a small dip-switch
located behind an access hole in the bottom of
the module.
If the module is being used in a stand alone
application then the optional power supply (R PS
3001 E or R PS 3001 U) is required to power the
module (not shown)
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Alarm LED
Front
Side
D AD 3220 B
AES in 2
AES in 1
OUT 1.1
OUT 2.1
OUT 2.2
OUT 2.3
OUT 1.2
OUT 1.3
OUT 1.4
made in Germany
OUT 2.4
Power / Data Connection
Bottom
LED 1
DIP Switch
LED 2
OFF
ON
LED 2
LED 1
1 2 3 4
Figure 2 – Module Layout
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Connections
Audio / Video Connections
The D AD 3220 B MiniModule is configured with
standard 75 Ohm BNC connectors for AES3-id
digital audio. Connection is self-explanatory. We
recommend the use of high quality cable suitable
for digital applications to reduce the risk of
interference or errors due to excessive cable
attenuation.
Note. Due to the compact design of the module it
will be necessary to use a connection tool to
secure the BNC video connectors to the module.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Power Connections
If using the module in a stand-alone application
use the separate R PS 3001 E (for Europe) or R PS
3001 U (USA) power brick option.
DC Power Connector
The MiniModule has a captive power lead fitted to
the module, with a male 5 pin locking bayonet
connector. This connection provides DC power
and also data connectivity to the module.
Connector wiring is shown below.
Data Connection
Power Connection
GND
+ 5V
3
i2C-SDA (data)
i2C-SCL (clock)
4 2
1
5
Male Connector
(view looking into connector from front)
Caution
Only use the optional LYNX R PS power
modules. Please make sure the brick is not
connected to the main supply when
making the DC power connection to the
module. Ensure the 5-pin power
connector is locked securely in place.
!
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Installation
Mechanical
Stand Alone Operation
The D AD 3220 B MiniModule can be used in a
stand alone application. There are two options for
the use of the module in this way.
a) Using the R FR 3005 Rack Frame 1 option. This
allows up to any 10 of the MiniModules to be
secured onto a rack frame assembly for 19 inch
rack mounting. This keeps the modules secured,
organized and out of the way. The R PS 3001
power brick option or the R FR 3010 option is
required to power each module. Please refer to
the R FR 3005 Reference Manual supplied with
this option for more details.
b) Single Use. The MiniModule can be powered
independently with the R PS 3001 option and
used in any location where this functionality is
required.
Caution. Care needs to be taken
when using the module in this way, as
it is not physically secured. Keep the
module away from the floor to avoid
the risk of someone stepping or
tripping on the unit, and locate the
unit away from excessive sources of
heat and any sources or moisture.
!
If using more than one MiniModule in any
installation, the R FR 3005/3010 Rack frame
combination is highly recommended.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Multiple Units
Most applications will require more than one
MiniModule, which can include any of the
available Series 3000 MiniModule product range.
There are two options for mounting multiple units.
a) Using the R FR 3005 Rack Frame option. This
allows up to any 10 of the MiniModules to be
secured onto a rack frame assembly for 19 inch
rack mounting. The R PS 3001 power brick
option or the R FR 3010 option is required to
power each module. Please refer to the R FR
3005 Reference Manual for more details.
b) Using the R FR 3010 Rack frame extension
option. Can be combined with the R FR 3005
Rack frame option. Each module plugs into a
connection bus, which provides common
power for all modules. (no R PS external power
supplies are needed). Remote control and
status monitoring of all modules is possible with
the addition of the R CT 5020 rack controller
and R CT 5030 master controller options. Please
refer to the respective reference manuals for
these options for details of mechanical
installation.
The very small size and density of the MiniModules
combined with the available rack frame options
allows the addition of a complex and custom signal
distribution system without taking any additional
front rack space. The rack frames are designed for
installation in the back of 19-inch racks where there
is normally plenty of available space. Ideal for
mobile truck installations and facility expansions
where space is at a premium.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Electrical Installation.
Stand Alone Operation
The MiniModule requires the R PS 3001 power brick
option for stand-alone operation. Two versions are
available R PS 30001 E for European markets and R
PS 30001 U for the US markets. Please ensure you
have the correct power option for your region. The
connection to the module is made with a small 5-
pin connector, which has a twist bayonet securing
system. Please make sure the connection is solid
and locked in place. A strain relief is included within
the module to prevent excessive strain on the
connection.
Signal connections should be made with care,
please ensure connections are correct and
compatible equipment is feeding / receiving the
signals from the module or damage can result.
Caution. Only use the optional LYNX R PS
3001 power modules. Please make sure
the brick is not connected to the main
supply when making the DC power
connection to the module. Ensure the 5-
pin power connector is locked securely in
place.
!
Caution. Care needs to be taken when
using the module in this way, if it is not
physically secured. Keep the module
away from the floor to avoid the risk of
someone stepping or tripping on the unit,
and locate the unit away from excessive
sources of heat and any sources or
moisture.
!
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Multiple Units
When installing multiple MiniModule units it is
recommended you use the R FR 3005 Rack Frame 1
and / or R FR 3010 Rack Frame 2 options. Please
refer to the documentation supplied with these
options for details on electrical installation.
Settings and Control
The D AD 3220 B is configured via the integral 4-
position dip-switch. This is located on the bottom of
the module and can be accessed through the
cutout provided (fig 2)
Channel 2 Status
Channel 1 Status
DIP Switch
OFF
ON
LED 2
LED 1
1 2 3 4
Switch Settings
Below the switch settings for the 4-position dip-
switch are defined. Please see the section following
the table for more detail on the switch function.
Switch
Setting
ON
OFF
ON
OFF
ON
OFF
ON
Function
Enable Local Adjustment
Disable Local Adjustment
Dual 1 > 4 mode
Single 1 > 8 mode
Not Used
Not Used
Not Used
Not Used
1
2
3
4
OFF
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Switch Function Detail
All settings are stored in Flash Ram inside the
module (see Auto Store section in this manual).
Settings will be recalled on power up.
Dip Switch 1
This switch enables local control using the dip-
switches. ON enables local control and makes
selections on the dipswitch active, and OFF
disables local control (locking out any local
changes)
Note.
When Switch 1 is initially switched to ON, the static
settings currently set on the dip-switches may not
reflect the actual configuration stored in the
module. This is because all settings can be
changed from the remote control system or via the
Service Adapter. This overrides the local dip
switches regardless of Switch 1 ON/OFF setting. To
ensure the module reads the local dip switch
settings it is recommended to toggle Switch 1 ON-
OFF-ON before making any local changes to the
dip switches.
Dip Switch 2
This switch selects the mode of operation for the
module. ON selects dual 1 into 4 mode where each
individual AES input is distributed to four outputs.
OFF selects 1 into 8 mode where input AES in 1 is
distributed to all 8 outputs.
Dip Switch 3
This is not used
Dip Switch 4
This is not used
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Factory Preset Condition
The D AD 3220 B is delivered preset for the following
mode of operation:
• Local Adjustment Enabled (Switch 1 ON)
• Dual 2 x 1:4 mode
(Switch 2 ON)
If this is the mode of operation required, then no
adjustments are necessary.
Auto Store
If no parameters are changed for 10 seconds then
the current settings will be written into flash memory
automatically, this can be seen by the front LED
flashing yellow four times.
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Alarm/LED Status Indicators
The D AD 3220 B module has built in LED indicators,
which serve as alarm and status indication for the
module. Function is described below. The Indicators
are found on the bottom of the module and can
be seen through the access holes provided. (fig2)
Module Edge Status LED
Channel Status LED`s are provided on the module
edge, which has three color states. LED 1 is for AES
in 1 and LED 2 is for AES in 2.
Note. When in 1:8 mode LED2 is always OFF
Channel 2 Status
Channel 1 Status
DIP Switch
OFF
ON
LED 2
LED 1
1 2 3 4
LED Color Indication
Green
Yellow
Red
Input Signal Present / locked
AES errors (Parity errors)
Input signal not present / not locked
Front Panel Alarm Indicator
There is also a single alarm LED on the front side of
the module, which is designed for quick and easy
indication of a problem condition.
LED Color Indication
Green
Yellow
Input signals present
One input missing / errors (only in dual
mode)
Red
Input signals lost
LED OFF indicates power is lost, or there is a power
supply fault.
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Locate Function
For larger systems which may have multiple
MiniModules of the same type in a single rack, or
multiple rack systems on a large central control
system we have added a useful utility which will
help to visually locate a suspect module quickly
(When used in conjunction with the optional
control system and software)
Once the specific module has been selected on
the control system there is a locate button on the
top of the GUI:
Locate Function in Control System
When Locate is selected the status indicator on the
GUI and the module LED`s will flash yellow in the
following continuous sequence.
3 short flashes…. Pause…. 3 short flashes …
This uses the alarm LED located on the front of the
module and in some cases any channel or status
LED`s that may be used in the module.
Use of the locate function will not interfere with the
normal operation of the module.
For more details on this feature please check the
documentation supplied with the controller
software.
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Specifications (D AD 3220 B)
Inputs
Signal
1 or 2 (switchable) unbalanced with transformers
(AES3id)
Input Impedance
Connection
75 Ohms
BNC
Return Loss
<25dB (32KHz to 100KHz)
Outputs (digital)
Signal
8 x AES3id unbalanced outputs with transformers
Output Impedance
Connection
75 Ohms
BNC
Output Level
1.0v p-p (nominal)
Operating Modes
Dual
2 audio input channels with 4 outputs each
1 audio input channel with 8 outputs
Single
Performance
Sample Rate
32kHz to 108kHz (independent for each input
channel)
Jitter
< 0.025 ui
Status Monitoring
Input present, confidence flag, AES bi-phase
coding and parity error
Control
Remote Control of configuration (dual/single),
remote monitoring of signal status
Electrical Specifications
Operating Voltage
Power Consumption
Connection
+ 5VDC
3.0 VA
DC input via 5 pin locking bayonet connector
IEC 950/ EN 60950/VDE 0805
Safety
Mechanical
Size
Weight
85.5mm x 35.3mm x 27mm + connectors
150g
Ambient
Temperature
5°C to 35°C Maintaining specifications
-0°C to +50°C Operating
Humidity
Max 80% non condensing
Supplied Accessories
Documentation
D AD 3220 B Reference Manual and quick
reference guide
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Available Options
Below is a list of available options for the D AD 3220
B MiniModule. Please refer to product brochures or
our web site for more detailed information.
Model
Description
External brick power supply module for
Series 3000 MiniModules. European market
version. 100-240 VAC input, +5V DC output.
R PS 3001 E
External brick power supply module for
Series 3000 MiniModules. USA market
version. 110-240 VAC input, +5V DC output.
R PS 3001 U
R FR 3004
4 Module mounting frame. This is a small
mechanical mounting bracket for 4
MiniModules. Can be mounted with screws
on any surface.
Rack Frame 1. This is a basic 19 inch rack
mountable frame which can accommodate
10 MiniModules with power bricks R PS 1 or
can be extended with the R FR 3010.
R FR 3005
R FR 3010
Rack Frame 2. This is a card cage with
integrated central power supply, optional
redundant power supply and optional
controller, which can accommodate 10
MiniModules. Can be combined with R FR
3005
1.5m cable extension to connect one
MiniModule to R FR 3010
R PS C15
R PS C25
R PS 5010
R CT 5020
R CT 5010
R CT 3000
2.5m cable extension to connect one
MiniModule to R FR 3010
Redundant power supply for the R FR 3010
card cage
Rack controller for the R FR 3010 rack
frame
Rack Bus Extension for R FR 3010 rack
frame. In combination with R CT 5020
Service Adapter for remote configuration of
one MiniModule via PC or Palm
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Parts List
Due to the very dense design and high level of
integration there are no user serviceable electronic
assemblies within the D AD 3220 B module.
D AD 3220 B Mini Module (complete)
Description
Model Number
Part Number
Dual Digital Audio Dist Amp
D AD 3220 B
6.155.002.280
Service
If you are experiencing problems, or have questions
concerning your D AD 3220 B MiniModule please
contact your local distributor for assistance.
We offer a fixed cost service exchange program for
defective Series 3000 MiniModules out of Warranty.
Please contact your distributor or check our web
site for details on this program.
More detailed information and product updates
may be available on our web site:
You will also find links to contact us directly for
assistance.
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Contact Information
Please contact your local distributor; this is your
local and fastest method for obtaining support and
sales information.
LYNX Technik can be contacted directly using the
information below.
Address
LYNX Technik AG
Sandstraße 7
64404 Bickenbach
Germany.
Phone
Fax
+ 49 (0) 6257 938017
+ 49 (0) 6257 938025
Website
E-Mail
LYNX Technik manufactures a complete range of
high quality modular products for broadcast and
Professional markets, please contact your local
representative or visit our web site for more product
information.
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
This Page is intentionally left blank
Page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual D AD 3220 B Version 1.0
Notes
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
|