PS760
Document Camera
User Manual
[Important]
To download the latest version of Quick Start
Guide, multilingual user manual, software, or
driver, etc., please visit Lumens™
0
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
2
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9 DIP Switch....................................................................................46
Chapter 11 Troubleshooting ........................................................................48
Chapter 11 Troubleshooting ........................................................................49
Attachment 1....................................................................................................52
3
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics
Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Lumens Digital Optics Inc. unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies, nevertheless without any intention
of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.
4
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Safety Instructions
Always follow these safety instructions when setting up and using the Document Camera:
1. Do not place Document Camera in tilted position.
2. Do not place the Document Camera on an unstable trolley, stand or table.
3. Do not use the Document Camera near water or source of heat.
4. Use attachments only as recommended.
5. Use the type of power source indicated on the Document Camera. If you are not sure
of the type of power available, consult your dealer or local electricity company for
advice.
6. Place the Document Camera on a place that it can be unplugged easily.
7. Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extensions leads or multi-way plug boards as this may
cause fire or electric shock.
9. Do not place the Document Camera where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug.
10. Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the projector case. They provide ventilation
and prevent the Document Camera from overheating. Do not place the Document
Camera on a sofa, rug or other soft surface or in a built-in installation unless proper
ventilation is provided.
12. Never push objects of any kind through cabinet slots. Never allow liquid of any kind
to spill into the Document Camera.
13. Except as specifically instructed in this User Manual, do not attempt to operate this
product by yourself. Opening or removing covers may expose you to dangerous
voltages and other hazards. Refer all servicing to licensed service personnel.
14. Unplug the Document Camera during thunderstorms or if it is not going to be used for
an extended period. Do not place the Document Camera or remote control on top of
heat-emitting equipment or heated objects such as a car, etc.
15. Unplug the Document Camera from the wall outlet and refer serving to licensed
service personnel when the following situations happen:
If the power cable or plug becomes damaged or frayed.
If liquid is spilled into it or the Document Camera has been exposed to rain or
water.
<Note> Using an incorrect battery type in the remote control may result in
breakdown. Follow your country’s instructions on how to dispose of used batteries.
5
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This Document Camera has a 3-wire AC line Plug. This is a safety feature to
ensure that the plug will fit into the power outlet. Do not try to disable this safety
feature.
If the Document Camera will not be used for an extended time, unplug it from the
power socket.
Note
Risk of Electric Shock
Note: To reduce the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel only.
This symbol indicates that
this equipment may contain
dangerous voltage which
could cause electric shock.
This symbol indicates that
there are important operating
and maintenance
instructions in this User
Manual with this unit.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A
or B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational
environment. It is not intended for residential use.
This is a Class A product. In a domestic environment it may cause radio
interference, in which case the user may be required to take adequate measures.
The typical use is in a conference room, meeting room or auditorium.
6
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Package Contents
4-Step Card
(Note to Teacher)
PS760
Quick Start Guide
(For download of other
language versions, please visit
Lumens website)
Download and Safety
Instruction
USB Cable
Audio Cable
VGA Cable
Mini-DIN Adapter
Power Cord
Appearance may vary depending
on country/region
Power Adapter
Remote Control
Remote Control Holder
Microscope Adapter
7
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Product Overview
8
1.
3
6
2
5
3
9
7
4
1. Lens
2. Camera arm
4. Backlight
3. Auxiliary floodlight and lamp arm
5. Remote Control Holder
7. Control panel
6. DIP Switch
8. Remote sensor
9. Input/output port
3.1 Relative position of the presenter and document
8
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Installation and Connections
4.1 System diagram
Router or
HUB
Projector or monitor
COMPUTER or TV
Computer
DVD
Computer (1)
Computer (2)
LCD TV
TV
Computer (1) and
Computer (2)
Projector or monitor
Earphone or speaker
9
English -
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Connecting to a projector or monitor
VGA Cable
Power
Adapter
Power Cord
Monitor or
Projector
AC Outlet
4.3 Connecting to a Computer and Use Lumens Software
or an Interactive Whiteboard (IWB)
Projector
USB
Cable
Power
Adapter
VGA Cable
Power
Cord
USB Cable
AC Outlet
Computer
Software can be downloaded from Lumens website.
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Connecting to Internet
Power
Adapter
Power Cord
AC Outlet
Router or HUB
For the related setting, please refer to 7.26 I would like to use the
network remote control function.
4.5 Connecting to a Projector, 2 PCs, and a Monitor at the
Same Time
Power
Adapter
VGA Cable
VGA Cable
VGA Cable
VGA Cable
Power
Cord
(Default)
AC Outlet
Projector
Monitor
Computer (1)
Computer (2)
Press
button to switch the image source.
For VGA 1 setting, refer to 7.2 I would like to switch image sources.
For VGA 2 setting, refer to 7.3 I would like to set the image source of
VGA OUT2.
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
4.6 Connecting to a TV (C-Video or S-Video)
DIP Switch
Mini-DIN
Adapter
C-Video Cable
S-Video
Cable
NTSC: USA, Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea, and
Mexico.
PAL: Countries/regions not listed above.
Please adjust it to be suitable for the local voltage frequency of 50/60Hz. For the
frequency in actual use, please refer to the manual. (Attachment 1)
<Note> You should unplug and reconnect the power cord, and then
restart the machine for DIP Switch Settings to take effect.
4.7 Connecting to an HDTV
HDMI Cable
Power
Adapter
HDTV
Power Cord
AC Outlet
English - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8 Connecting to DVD and display DVD images
Press
button to switch the image source.
For VGA 1 setting, refer to 7.2 I would like to switch image sources.
For VGA 2 setting, refer to 7.3 I would like to set the image source of
VGA OUT2.
4.8.1 C-Video
VGA Cable
Power
Adapter
C-Video Cable
Audio Cable
Power
Cord
Monitor or
Projector
AC Outlet
DVD
4.8.2 S-Video
Power
Adapter
VGA Cable
S-Video Cable
Audio Cable
Power
Cord
Monitor or
Projector
AC Outlet
DVD
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9 Connecting to a Computer with RS232
Mini-DIN Adapter
Power
Adapter
Power
Cord
RS232 Cable
Computer
AC Outlet
4.10 Connecting to Audio Input and Output
<Remark> The default of Audio Output is based on VGA OUT(1).
<Remark> Or connect to an additional amplifier before connecting
to the speaker.
Power
Adapter
Audio Cable
Audio Cable
Audio Cable
Power
Cord
TV or DVD
AC Outlet
Computer (1)
Speaker
Computer (2)
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
4.11 Installing application software
The application software installed on the computer enables you to:
Control the PS760.
Capture and record images.
Annotate the image, highlight important details and save it.
Support the full screen function.
<Note> Please refer to Podium View™ software user manual for
installation steps and software operation.
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Start Using
<Note>: Please adjust it to be suitable for the local voltage frequency of
50/60Hz. For the frequency in actual use, please refer to the
manual. (Attachment 1)
1. Remove the lens cap.
2. Pull up the camera and the camera arm. The camera should aim at the
center of the presenter.
3. Pull up the lamp arm to a proper position.
4. Place an object to be displayed under the camera.
5. Press [POWER]
button to turn on the power. (Remark: Do not
press [POWER] button until the red light stays lit)
6. Press [AUTO TUNE]
button to optimize the image. You are ready to
teach/present.
<Note>: According to your request, you can adjust the camera head
slightly to aim at the center of the documents when the anchor
of lens was reached.
When using the remote control, aim at the remote sensor on the DC190,
and press the power button.
Once PS760 is turned on, the LED indicator on the control panel will
light up red. Please contact your dealer if the LED is not on.
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 Control Panel/Remote Control
and Setting Menu
6.1 Functions of control panel and remote control
<Remark> The below functions are listed alphabetically.
Name
Function Descriptions
Operation
Turn on and off the Document Camera.
Remote control/
Control panel
,,,
Move up, down, left or right to select the
needed function.
Remote control/
Control panel
AUTO TUNE Automatically adjust the image to have the
Remote control/
Control panel
best brightness and focusing performance.
Press and hold the button on the control
panel for 2 seconds to lock/unlock keys (for
control panel only).
BRT+/-
Manually adjust the brightness of the image. Remote control/
Control panel
CAPTURE
Capture images to the USB disk (priority) or Remote control/
internal memory.
Control panel
DELETE
ENTER
Delete images from the USB disk (priority)
or internal memory.
Remote Control
Enter/Activate functions.
Remote control/
Control panel
FREEZE
Freeze the current image to temporarily
Remote control/
stay on the screen. Press again to defreeze. Control panel
LAMP
MASK
MENU
Turn on/off the lamp.
Control panel
Enter Mask/Spotlight mode.
Activate the setting menu/exits the menu.
Remote Control
Remote control/
Control panel
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
PAN
PIP
Enable/Disable the Partial Enlarged mode.
Remote Control
Remote Control
Image comparison (compares live images
with captured image files).
PLAYBACK
RECORD
Read files stored in the USB disk (priority)
or internal memory.
Remote Control
Record motion images. Press [RECORD] to Remote Control
record images to USB disk (priority) or
internal memory, and then press [RECORD]
again to stop recording.
SLIDE
SHOW
Show the photos or videos stored in the
USB disk (priority) or internal memory in
Slide mode.
Remote Control
VGA 1
Switch between different image sources of
Remote control/
Control panel
VGA 1.
Visual Presenter/VGA IN(1)/VGA
IN(2)/DVD.
ZOOM +/-
Increase or decrease the image size.
Remote control/
Control panel
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Setting Menu
6.2.1Main Menu:
<Remark> Press [Menu] on the remote control or control panel to enter the
setting menu; The bold underlined values in the following table are defaults.
3rd Level
Adjustment
values
1st Level
Major Items
2nd Level
Minor Items
Function Descriptions
Automatically adjust the image to
have the best brightness and
focusing performance.
Auto Tune
Auto Focus
Focus
Enter
Automatically adjust the focal
length of image.
Enter
Use the left and right arrow keys to
adjust focal length on an object.
0~A~Max
0~A~Max
Use the left and right arrow keys to
adjust the brightness.
Brightness
1. 0°
2. 90°
3. 180°
4. 270°
Rotate the image by
0°/90°/180°/270°.
Rotate
Display
Normal/Slide/
Film/Microscope select the image mode.
Use the left and right arrow keys to
Mode
Use the left and right arrow keys to
select the image mode.
Photo/Text
Photo/Text/Gray
Enter
Press [ENTER] to enter the MASK
Mode. For details, please refer to
6.2.2 MASK Mode Setting Menu
and 6.2.3 Spotlight Mode Setting
Menu.
Mask
Use the left and right arrow keys to
select. The night vision mode suits
with darker environment.
Night Vision
On/Off
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
3rd Level
Adjustment
values
1st Level
Major Items
2nd Level
Minor Items
Function Descriptions
Press [ENTER] to show the photos
or videos stored in the USB disk
(priority) or internal memory in Slide
mode.
Slide Show
Playback
Enter
Press [ENTER] to enter the
thumbnail mode of image.
Enter
1. 0.5 Sec
2. 1 Sec
3. 3 Sec
4. 5 Sec
5. 10 Sec
6. Manual
Use the left and right arrow keys to
select the delay time. Select
manual mode to switch images
manually.
Delay
Use the left and right arrow keys to
select the image quality for the
captured images and recorded
videos.
1. High
2. Medium
3. Low
Image Quality
Storage
Press [ENTER] to immediately
copy the data in internal memory to
the USB Disk.
Copy To USB
Disk
Yes/No
Use the left and right arrow keys to
select, press [ENTER] to confirm
the deletion of all images from the
USB disk (priority) or internal
memory.
Use the left and right arrow keys to
select, and then press [ENTER] to
format the USB disk (priority) or
internal memory.
Delete All
Format
Yes/No
Yes/No
Use the left and right arrow keys to
turn on/off the auto erase function.
When “On” is selected, the stored
images will automatically be
deleted when the system is turned
off.
Auto Erase
On/Off
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
3rd Level
Adjustment
values
1st Level
Major Items
2nd Level
Minor Items
Function Descriptions
Use the left and right arrow keys to
select the capture mode.
(Single/Continuous/Video/
Disable)
<Note> The image cannot be
captured when the capture mode
is set to [VIDEO].
1. Single
2. Continuous
shooting
Capture Action
Capture Mode
Capture Time
3. Disable
Use the left and right arrow keys to
select CAPTURE setting.
Photo/Video
1. 1 hr
2. 2 hr
3. 4 hr
4. 8 hr
5. 24 hr
6. 48 hr
7. 72 hr
1. 5 Sec
2. 10 Sec
3. 30 Sec
4. 1 Min.
5. 2 Min.
6. 5 Min.
Use the left and right arrow keys to
select the capture time.
<Note> It only works when the
capture mode is set to
[continuous].
Use the left and right arrow keys to
select the capture interval.
<Note> It only works when the
capture mode is set to
Capture Interval
Setting
[continuous].
Regardless of outside environment,
the machine will adjust the
brightness to the optimal condition.
Use the left and right arrow keys to
select.
Regardless of outside light or color,
the machine will adjust the color to
the optimal condition; Press
[ENTER] to activate.
Auto Exposure
White Balance
On/Off
Enter
Use the left and right arrow keys to
adjust the volume.
Volume
0~A~Max
DLP/LCD
On/Off
Use the left and right arrow keys to
select the projector type and
reduce image noise.
Projector Type
Digital Zoom
Use the left and right arrow keys to
turn on/off digital zoom.
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
3rd Level
Adjustment
values
1st Level
Major Items
2nd Level
Minor Items
Function Descriptions
Press [ENTER] to show the
Ethernet
Enter
Ethernet window. For details, please
refer to 6.2.5 Ethernet Setting Menu.
1. English
2. 繁體中文
3. Deutsch
4. Français
5. Español
6. Русский
7. Nederlands
8. Suomi
English
Traditional Chinese
German
French
Spanish
Russian
Dutch
Finnish
Language
Polish
9. Polski
Italian
Portuguese
Swedish
Czech
Simplified Chinese
Use the left and right arrow keys in
the Language option to select the
preferred language.
10. Italiano
11. Português
12. Svenska
13. ČESKY
14. 简体中文
1. VGA OUT(1)
2. VGA IN(1)
3. VGA IN(2)
4. DVD
Use the left and right arrow keys to
select the images output from VGA
OUT(2).
VGA OUT(2)
Date & Time
Lock Down
Preset Load
Preset Save
Factory Reset
Advanced
Press [ENTER] to show the Date &
Time window. For details, please
refer to 6.2.4 Date & Time Setting
Menu.
Use the left and right arrow keys to
turn on/off the lock down function.
You can set the password when
[On] is selected.
Read the value of the current
image mode.Use the left and right
arrow keys to select, and then
confirm by pressing [ENTER].
Store the value of the current image
mode.Use the left and right arrow
keys to select, and then confirm by
pressing [ENTER].
Use the left and right arrow keys to
select, and then confirm by
pressing [ENTER] to restore the
factory defaults.
Enter
On/Off
Yes/No
Yes/No
Yes/No
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.2MASK Mode Setting Menu
3rd Level
Adjustment
values
1st Level
Major Items
2nd Level
Minor Items
Function Descriptions
Adjust the transparency of the
mask using left and right arrow
keys.
Select the step distance of the
mask using left and right arrow
keys.
Transparency
Step
0~4~6
Large/Medium/
Small
Adjust the vertical height of the
mask using left and right arrow
keys.
Mask Mode
V Size
0~A~Max
Adjust the horizontal length of the
mask using left and right arrow
keys.
H Size
0~A~Max
Press [ENTER] to enter the
Spotlight mode.
Spotlight
Activate
6.2.3Spotlight Mode Setting Menu
3rd Level
Adjustment
values
1st Level
Major Items
2nd Level
Minor Items
Function Descriptions
Adjust the transparency of the
border in the Spotlight mode using
left and right arrow keys.
Select the step distance of the
spotlight zone using left and right
arrow keys.
Adjust the height of the spotlight
zone using left and right arrow
keys.
Transparency
Step
0~4~6
Large/Medium/
Small
Spotlight
Mode
V Size
0~A~Max
Adjust the width of the spotlight
zone using left and right arrow
keys.
Press [ENTER] to return to live
image.
H Size
Live
0~A~Max
Activate
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.4Date & Time Setting Menu
3rd Level
Adjustment
values
1st Level
Major Items
2nd Level
Minor Items
Function Descriptions
Press [ENTER] to modify the
values using left and right arrow
keys.
Year
00~36
Press [ENTER] to modify the
values using left and right arrow
keys.
Press [ENTER] to modify the
values using left and right arrow
keys.
Press [ENTER] to modify the
values using left and right arrow
keys.
Press [ENTER] to modify the
values using left and right arrow
keys.
Month
01~12
01~31
00~23
00~59
Date & Time Date
Hour
Minute
6.2.5Ethernet Setting Menu
3rd Level
Adjustment
values
1st Level
2nd Level
Function Descriptions
Major Items
Minor Items
Enable/Disable DHCP using left
and right arrow keys.
DHCP
On/Off
Press [ENTER] to modify the values
using left and right arrow keys.
Press [ENTER] to modify the values
using left and right arrow keys.
Press [ENTER] to modify the values
using left and right arrow keys.
IP Address
Netmask
Geteway
192.168.100.150
255.255.255.0
Ethernet
192.168.100.254
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.6Annotation Tools (Annotation)
After the mouse is connected, right click the mouse to start the tools.
<Note> When the setting menu is activated, the tools cannot be used.
Icon of
Annotation
Icon
Description
/
Expand/Collapse the Annotation menu
Open/Close the Free-hand Drawing
Tool menu
Main Menu
Select the line width
Select pen color
Clear all
Free-hand drawing tool
Draw a line
Draw a rectangle
Draw a polygon
Draw an ellipse
Free-hand
Drawing Tool
menu
Eraser
(Clear marks of free-hand drawing
tool)
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7 Descriptions of major functions
7.1 I would like to automatically adjust the image to have
best brightness and focusing performance (Auto
Tune)
1. Press [AUTO TUNE] on the remote control or control panel to adjust
automatically.
7.2 I would like to switch image sources
The default of image source is Live Image. Press [VGA 1] on the remote
control or control panel to switch setting, and PS760 as well as audio
output will switch among the following four modes in turn:
1. Live images (default)
2. VGA IN(1)
3. VGA IN(2)
4. DVD (C-Video/S-Video)
<Note> VGA IN mode will be switched to DVD mode automatically in
turn when it is not connected to input equipment.
<Remark> This button is disabled in C-VIDEO Out mode.
7.3 I would like to set the image source of VGA OUT2
Press [MENU] on the remote control or control panel to enter the setting
menu
1. Press [] or [] to the [Advanced] menu.
2. Press [] to enter [VGA OUT2].
3. Press [ ] or [] to select [VGA OUT(1)/VGA IN(1)/VGA IN(2)/DVD].
4. Press [MENU] to exit.
<Note> VGA IN mode will be switched to DVD mode automatically in
turn when it is not connected to input equipment.
<Remark> If VGA OUT(1) is connected simultaneously, the audio
output will be based on VGA OUT(1).
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4 I would like to make text clearer and photos more
colorful
7.4.1 Photo/Text mode descriptions
The default [Photo/Text] mode is in Photo (Photo mode). To change this
setting, please use the remote control or the control panel to enter the
Options of the Setting Menu.
[Photo] (default): for viewing photos or text with photos, making photos
more colorful.
[Text]: for viewing text files, making the text clearer.
[Gray]: for viewing black & white photos which will make the grayscale
differentiation distinct.
7.4.2 Setting Photo/Text mode
To change the settings, please use the remote control or the control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to select [Photo/Text]. (Please refer to 7.4.1 Photo/Text mode
descriptions to make the best choice.)
4. Press [] or [] to select the [Photo/Text/Gray].
5. Press [MENU] to exit.
7.5 I would like to zoom in/out images
1. Press [ZOOM+] on the remote control or control panel to zoom in
images.
2. Press [ZOOM-] on the remote control or control panel to zoom out
images.
7.6 I would like to adjust the focal length
7.6.1 Auto Tracking
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Display] menu.
3. Press [] to [AF button].
4. Press [ENTER] to activate AF button.
5. Press [MENU] to exit.
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
7.6.2 Manual Tracking
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Display] menu.
3. Press [] to the [Focus].
4. Press [] or [] to adjust focal length.
5. Press [MENU] to exit.
7.7 I would like to adjust the brightness
1. Use Remote Control or Control Panel and press [BRT+] to make it
brighter.
2. Use Remote Control or Control Panel and press [BRT-] to make it
darker.
7.8 I would like to turn on/off the lamp
The default of the lamp is ON. When using the control panel:
1. Press [LAMP] to switch ON/OFF. (in the sequence of arm
lamp/backlight/OFF)
7.9 I would like to freeze images
1. Press [FREEZE] on the remote control or control panel to freeze the
current image on the screen.
7.10 I would like to adjust the volume
<Note> Volume control is intended to control the external audio output
equipment only.
7.10.1 Adjust Volume (OSD)
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to the [Volume].
4. Press [] or [] to adjust the volume.
5. Press [MENU] to exit.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
7.10.2 Adjust the volume of the video
In PLAYBACK mode, Press [] or [] to adjust the volume of
the video.
7.11 I would like to capture images
7.11.1 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel to
capture and save images.
You cannot capture images when the capture mode is set to
[Disable]. If it is set to [Continuous], you can capture images
continuously. Press [CAPTURE] to start capturing
continuously, or press [CAPTURE] again to exit.
To change the quality of captured images, please refer to
7.11.2 Setting the quality of captured images.
To change the settings of captured images, please refer to
7.11.3 Setting continuous capture.
7.11.2 Setting the quality of captured images
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [MENU] to exit.
7.11.3 Setting continuous capture
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [Capture Action].
4. Press [] or [] to select [continuous].
5. Press [] to the [Capture Mode].
6. Press [] or [] to select [Photo].
7. Press [] to find [Capture Time]; Press [] or [] to select capture
time.
8. Press [] to find [Capture Interval]; Press [] or [] to select
interval time.
9. Press [MENU] to exit.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
7.12 I would like to record videos
7.12.1 Recording motion images
<Note> You may not be able to capture or record images when
[Capture Action] mode is set to [Disable].
Remote control:
1. Press [RECORD] to record videos.
2. Record sounds with the built-in microphone of the control panel.
3. Press [RECORD] again to stop recording.
Control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to the [Capture Mode].
4. Press [] or [] to select [Video].
5. Press [MENU] to exit.
6. Press [CAPTURE] to record videos.
7. Press [CAPTURE] again to stop recording.
7.12.2 Setting the image quality
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [MENU] to exit.
7.12.3 Playing videos
For playing videos, please refer to 7.13 I would like to view
captured/recorded images.
7.13 I would like to view captured/recorded images
1. Press [PLAYBACK] on the remote control to show the thumbnails
of all stored files.
2. Press [] or [] or [] or [] to select the thumbnail you want you
browse.
3. Press [ENTER] for the full-screen display of the image.
4. Press [] or [] to select different video and audio files.
5. Press [] or [] to adjust the volume of the video.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press [MENU] to exit.
<Note> A better playback performance will be achieved when an
external speaker is connected to AUDIO OUT.
7.14 I would like to delete the captured/recorded images
1. Use the remote control and press [PLAYBACK].
2. Press [] or [] or [] or [] to select the file you want to delete.
3. Pressing [DELETE] will open a [Delete File] window.
4. Press [] or [] to select [Yes] (The default value is No).
5. Press [ENTER] to delete the selected file.
6. Press [MENU] to exit.
7.15 I would like to automatically delete the stored images
whenever it is turned off (Auto Erase)
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] or [] to [Auto Erase].
4. Press [] or [] to select [On].
5. Press [MENU] to exit.
<Remark> It will automatically delete all captured photos when it
is turned off.
7.16 I would like to use the MASK and Spotlight function
7.16.1 I would like to use the MASK or Spotlight mode
Use Remote control:
1. Press [MASK] to enter the Mask mode, and press [], [], [], or [] to
move the mask position.
2. Press [MASK] again to enter the Spotlight mode, and press [], [], [],
or [] to move the zone position.
3. Press [MASK] again to exit and return to the live image screen.
Live image
MASK mode
Spotlight mode
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
7.16.2 I would like to set the size of Mask/Spotlight function
In Mask/Spotlight mode, use the remote control:
1. Press [MENU] to enter the image OSD menu.
2. Press [] or [] to select the item to be modified [Transparency/Step/V
Size/H Size]. (For details, please refer to 6.2 Setting Menu.)
3. Press [] or [] to perform the modification.
4. Press [MENU] to exit the image OSD menu and return to the Mask
mode.
7.17 I would like to enlarge a part of the image (PAN)
Use Remote control:
1. Press [PAN] to enter the Partial Enlarged mode.
2. Press [], [], [], or [] to move and view the partial enlarged images.
3. Press [PAN] to exit the partial enlarged mode.
7.18 I would like to play the slides (Slide Show)
7.18.1 Setting delay time
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Delay].
4. Press [] or []] to select image switch mode between [0.5 Sec/1 Sec/3
Sec/5 Sec/10 Sec/Manual].
5. Press [MENU] to exit.
7.18.2 Activating/Stopping the slide show
<Note> Upper Limit: The maximum size of single photo is 7 MB.
Remote control:
1. Press [SLIDE SHOW] to start playing.
2. Press [ENTER] to pause playing.
3. Press [ENTER] again to continue playing.
4. Press [SLIDE SHOW] again to stop playing.
English - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Slide Show].
4. Press [ENTER] to play.
5. Press [ENTER] to pause playing.
6. Press [ENTER] again to continue playing.
7. To stop playing, repeat Steps 1 and 4.
7.19 I would like to view the X-ray film
1. Place an X-ray film to be displayed under the camera.
2. Press [Lamp] button on the control panel to switch on the Backlight (in
the sequence of arm lamp/backlight/OFF)
3. Press [AUTO TUNE] button to optimize the image.
7.20 I would like to compare images (compare live images
with stored images (PIP))
This function will compare and contrast a live image with a stored image.
C1
C3
C2
C4
C5
C6
C7
Live image
Stored image
Remote control:
1. Press [PIP] to enter the photo selection screen.
2. Press [], [], [], or [] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [], [], [], or [] to move the live image.
5. Press [PLAYBACK] to return to image thumbnails and compare it with
other images.
6. Press [MENU] to exit.
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
7.21 I would like to reduce the image noise (Projector
Type)
1. This function enables Document Camera to automatically clear image
noise. The noise is especially obvious when Document Camera is
connected to a DLP projector. You can set the DLP projector to
improve the image quality.
2. If there is special noise when VGA out is connected, please set DLP
option to improve the image quality.
2.1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2.2. Press [] or [] to the [Setting] menu.
2.3. Press [] to enter [Projector Type].
2.4. Press [] or [] to select [LCD/DLP].
2.5. Press [MENU] to exit.
7.22 I would like to set the time for PS760
7.22.1 If you use the remote control or the control panel
1. Press [MENU] on the remote control or control panel to enter the
setting menu. (Refer to 6.2.4 Date & Time Setting Menu of 6.2
Setting Menu.)
2. Press [] or [] to select [Advanced] menu.
3. Press [] to the [Date & Time].
4. Press [ENTER] to open the date & time OSD menu.
5. Press [] or [] to the item to be set [Year/Month/Day/Hour/Minute].
6. Press [] or [] to modify the value.
7. Press [] or [] to move to the next item.
8. Press [MENU] to exit the item you have set.
9. Repeat steps 5 through 9 until you have completed the modifications.
10. Press [MENU] to exit OSD menu.
English - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
7.22.2 To use web remote control
<Remark> For more information about the website login page, please refer to
7.26.1 I would like to view the live image or use the control keys.
1
3
2
4
5
1. Click [System setting].
2. Click [Date config].
3. Set the date and time.
<Remark> Set Manually: Set the date and time manually.
Synchronize with Computer Time: Synchronize time with
the PC.
Synchronize with SNTP Server: Synchronize time with
SNTP server.
4. Select the date format.
5. Click [Submit] to conform and submit.
7.23 I would like to lock/unlock keys
Press and hold [AUTO TUNE] on the control panel for 2 seconds to lock
keys. To unlock keys, repeat the above procedure.
<Remark> When the keys are locked, the LED indicator of [ENTER]
on the remote control will light up red.
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
<Remark> This function applies to the keys of the control panel only.
The remote control can still be used. If you use the remote control to
turn off the power, the keys will be unlocked automatically after
reboot.
7.24 I would like to resume the factory default settings
(Factory Reset)
7.24.1 Using OSD menu
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to select [Advanced] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [ENTER] to activate.
7.24.2 Use Compound Key
1. Use the control panel, and press [ENTER + AUTO TUNE]
simultaneously to restore the initial value.
7.25 I would like to use a USB disk
1. Insert the USB disk and a [Copy To USB Disk] dialog box will appear,
and you are asked whether to copy files from PS760 to the USB disk.
Press [] or [] on the remote control or control panel
to select.
Copy To USB Disk
No
Yes
7.26 Computer-related functions
Ensure that the USB cable is connected and the software and drivers are
installed before using the computer-related functions. Refer to Chapter 4
Installation and Connections 4.11 Installing application software in
this user manual.
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
7.26.1 I would like to insert a photo in MS-Paint
<Remark> Support Windows XP Operation System only.
1. Click [File/From Scanner or Camera] in MS-Paint as shown in the
bottom left figure.
2. Click [Get Picture] will capture the photos of live images and insert the
files in use shown as top right figure.
7.26.2 I would like to insert a photo in MS-Word
<Remark> Support Windows XP Operation System only.
1. Click [Insert/Image/From Scanner or Camera] in MS-Word.
2. Select [USB Video Device] and click [Custom Insert].
USB Video Device
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click [Get Picture]. It will capture the photo of live image.
7.26.3 I would like to change the setting of the PS760 and then
capture a photo in MS-Word
<Remark> For Windows Office 2003 or later versions, please use the
function with OneNote.
1. Click [Insert/Image/From Scanner or Camera] in MS-Word.
2. Select [Lumens Document Camera Twain] and click [Custom Insert].
Lumens Document Camera Twain
English - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
3. A window showing a live image (see below) will be displayed.
4. Press [Capture] to capture images in MS-Word.
5. Press [Cancel] to exit.
7.26.4 I would like to set the PS760 as a PC Camera
<Remark> For Windows XP, please set by system name (USB video
device)
Open [My Computer] and click [Lumens Document] to open a live image.
Lumens
Document
7.26.5 I would like to connect an Interactive Whiteboard
To connect an Interactive Whiteboard, go to Lumens website to
download the reference guide for a specific brand.
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
7.27 I would like to use the network remote control
function
Network has a longer distance for controlling than USB and RS232
interface do. Each function of PS760 could be controlled and used by
the browser (IE) on the computer for users.
7.27.1 I would like to view the live images or use the control keys
7.27.1.1 Login to the PS760 network control page
1. Open the web browser (Internet Explorer) and enter the IP
address in the address bar
<Remark> To check IP address, please refer to 7.26.1.2 I would
like to check the network settings.
2. Enter the account [admin].
3. Enter the password (default password is [9999]), and then click
[OK].
7.27.1.2 I would like to check the network settings
DHCP is enabled by default. Please follow the steps below to check
the IP address.
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
English - 40
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press [] or [] to the [Advanced] menu.
3. Press [] or [] to the [Ethernet].
4. Press [ENTER] to open the Ethernet OSD menu.
5. Press [MENU] to exit OSD menu.
Ethernet
DHCP
ON
IP address
Netmask
Getway
7.27.1.3 View the live image
A. Use IE browser
2
3
1
1. View the live image.
2. The control method of control keys is the same as that of the remote
control. The button will be gray and disabled for users whose
permission is view-only.
3. Change the size of live image.
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
<Remark> For more information about user permissions, please
refer to 7.26.2 I would like to add or modify the user account.
B. Using VLC
<Remark> It is recommended that you download the VLC software
and view with it when the number of users is more than four.
Besides, all users must be in the same domain.
VLC is only provided for viewing, no control keys are available.
7.27.2 I would like to add or modify the user account
<Remark> Reference for User Permissions
User Type
Applications
Account
Admin
Operator
Viewer
IE or VLC
IE
IE
Y
N
N
management
Operating
functions
View images
Limitation on
the number of
accounts
Y
Y
Y
Y
N
Y
1
3
5
English - 42
Download from Www.Somanuals.com. All Manuals Search And Download.
7.27.2.1 I would like to add the user account
1. Click [User config].
2. Click [Account management].
3. Enter the username in the [User Name].
4. Enter the password in the [Password].
5. Enter the password in the [Confirm] again.
6. Set the permissions in the [Authority].
7. Click [Submit] to conform and submit.
7.27.2.2 I would like to delete the user account
1. Click the username in the [User List].
2. Click [Delete User] to delete the user.
7.27.2.3 I would like to modify the user password and
permissions
1. Click the username in the [User List].
2. Enter the old password in the [Old Password].
3. Enter the password in the [Password].
4. Enter the password in the [Confirm] again.
5. Set the permissions in the [Authority].
6. Click [Submit] to conform and submit.
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Connecting to Microscope
1 Mount the microscope adapter (Optional) onto the microscope.
<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø 28 mm, Ø 31 mm, Ø
33 mm, and Ø 34 mm.
2 The lens of PS760 connects with the microscope adapter
If the eyepiece is Ø 33 mm or Ø 34 mm, only one Lumens microscope
adapter is needed.
If the eyepiece is Ø 28 mm or Ø 31 mm, you need two microscope
adapters. (1. The Lumens microscope adapter. 2. The microscope
adapter suitable for the eyepiece size Ø 28 mm or Ø 31 mm).
English - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select the [Microscope] mode
3.1. If you use the remote control or the control panel
3.1.1. Press [MENU] to enter the setting menu.
3.1.2. Press [] or [] to the [Display].
3.1.3. Press [] to select [Mode].
3.1.4. Press [] or [] to the [Microscope].
4 If the image is not clear
4.1. Please adjust the focus of microscope.
4.2. Please press the remote control or the control panel [AUTO TUNE]
button to activate the auto focus.
5 Digital Zoom
5.1. If you use the remote control or the control panel
5.1.1. Press [MENU] to enter the setting menu.
5.1.2. Press [] or [] to the [Display].
5.1.3. Press [] to select [Digital Zoom].
5.1.4. Press [] or [] to the [On].
5.1.5. Press [ZOOM +] / [ZOOM -].
<Note> Please reset to normal mode after using the microscope,
otherwise, you are unable to use zoom in/out function.
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Display].
3. Press [] to select [Mode].
4. Press [] or [] to the [Normal].
English - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9 DIP Switch
<Note> You should unplug and reconnect the power cord, and then restart
the PS760 for all DIP Switch Settings to take effect.
9.1 Connecting to a projector or monitor
9.1.1 XGA 60Hz output
XGA 50Hz output
(default values)
9.1.2 SXGA 60Hz output
9.1.3 WXGA 60Hz output
9.1.4 UXGA 60Hz output
SXGA 50Hz output
WXGA 50Hz output
UXGA 50Hz output
English - 46
Download from Www.Somanuals.com. All Manuals Search And Download.
9.1.5 1080P 60 Hz output
1080P 50 Hz output
9.2 Connecting to a TV/DVD
9.2.1 NTSC: USA, Taiwan, Panama, Philippines, Canada, Chile,
Japan, Korea, and Mexico.
60Hz
50Hz
9.2.2 PAL: Countries/regions not listed above.
60Hz
50Hz
English - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 Packing the Machine
1.
2.
3.
Put the remote control back to the holder.
Fold back the camera head to align with the arm.
Turn the two lamp arms and the arm of camera head down and adjust
them to be parallel with the platform.
4.
5.
Put the lens cap on the camera head.
Finally, fold the machine as in the following figure.
English - 48
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 Troubleshooting
This chapter describes problems you may encounter while using PS760. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center.
No.
Problems
Solutions
1
Boot without power
signal
Make sure you have plugged in the power cord.
2
No image output from
the PS760
1. Check the power
2. Check all cable connections. Refer to Chapter 4
Installation and Connections in this manual.
3. Check the
, refer to PS750 User Manual Chapter 7
Descriptions of major functions 7.2 I would like to
switch image sources.
4. Check the settings for the source of the projector. For the
appropriate input selection of the projector, refer to the
projectors user manual.
5. Check if DIP Switch is properly set. Refer to Chapter 9
DIP Switch Settings for related settings.
3
4
Unable to focus
Probably the document is too close. Press [ZOOM-] on the
remote control or control panel. Or pull away the distance
between document and lens, then press [AUTO TUNE].
The image is
incomplete
Check the Auto Image setting of your projector. Please refer
to the user manual of the projector or check for the DIP
SWITCH settings.
5
6
Forget the password
for turning on
Please contact your distributor or the service center.
Lumens Document
Camera, Lumens™
and other
applications cannot
be used
Lumens Document Camera, Lumens™ and other
applications cannot be executed simultaneously. Only one
application can be executed at a time. Please close the
currently running applications and then execute the
application to be used.
simultaneously
7
8
When the unit is
turned on, the
auxiliary floodlight
do not light
Please make sure the arm lamp is set to [OFF]. For the
switch-on or -off of arm lamp, refer to PS750 User Manual
Chapter 7 Descriptions of major functions 7.8 I would
like to turn on/off the lamp.
PS760 fails to store
images or react
1. Check to see if the stored data have reached the
maximum size of the USB device (priority) or internal
memory.
2. Please make sure if the Capture function is set to
Continuous mode or the time for capture is set to be
English - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
long. For the related setting, refer to 7.11 I would like to
capture images of Chapter 7 Descriptions of major
functions.
9
The images
Press [AUTO TUNE] to automatically adjust to the optimal
brightness and focal length.
outputted from
PS760 are too bright,
dark or vague
10
Unable to record
images
1. Check to see if the stored data have reached the
maximum size of the USB disk (priority) or internal
memory.
2. Please confirm the rotation angle. You may not able to
record when the image is rotated by 90°/270°.
11
The operating steps in
the manual are not
applicable to the
machine
The operating steps in the manual may be not applicable
to the machine due to improvement in functions.Check to
see if the Firmware version of your machine is
up-to-date.
1
2
Please go to Lumens official website to check whether
the latest version is available for update.
The steps to check the FW version are as below:
2.1 Press [MENU] on the remote control or control
panel to enter the setting menu.
2.2 Press [] or [] to select [Advanced] menu.
Firmware
version
Master: PVC039
Slave: PVD035
If you are not sure whether it is the latest version, please
consult your dealer for advice.
12
Unable to login to the
network control page
If DHCP is enabled, the IP address may not be updated.
Please follow the steps below:
1
Press [MENU] on the remote control or control panel
to enter the setting menu.
2
3
4
5
6
7
8
9
Press [] or [] to the [Advance] menu.
Press [] or [] to the [Ethernet].
Press [ENTER] to open the Ethernet OSD menu.
Press [] to find [DHCP].
Press [ENTER] to modify it.
Press [] or [] to select [On].
Press [MENU] to exit the Ethernet OSD menu.
Repeat steps 3 ~ 4 and check IP address.
English - 50
Download from Www.Somanuals.com. All Manuals Search And Download.
13
The images
Please refer to the manual (Attachment 1), confirm the
voltage frequency and reset it according to Chapter 9 DIP
Switch Settings
outputted are not
clear, and the moire
appears.
English - 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Attachment 1
World voltage & frequency
Region/Country
Region/Country
Chinese English
Region/Country
Chinese English
Chinese
English
阿
富
汗
大
陸
關
石
島
島
Afghanistan 50
China
Colombia
Congo
Costa Rica 60
Cuba
50
60
50
Guam
Grenada
60
50
阿爾及利亞
哥 倫 比 亞
榴
Algeria
50
50
50
50
50
安
安
阿
澳
哥
地
根
拉
瓜
廷
洲
剛
果
瓜 地 馬 拉
Guatemala 60
Angola
哥斯大黎加
幾
蓋
海
內
亞
納
地
Antiqua
Argentina
Australia
Guinea
Gayana
Haiti
50
50
60
古
巴
亞
60
50
塞 普 路 斯
Cyprus
Czechoslov
akia
Dahomey
Den mark
Dominican 60
Dubai
Ecuador
Egypt
El Salvador
Equatorial
Guinea
Ethiopia
Faeroe
Island
澳
地
利
捷
克
夏
威
夷
Austria
50
50
Hawaii
60
60
亞
巴
巴
孟
巴
比
百
述
哈
爾
馬
林
拉
多
時
達
達
丹
荷
美
麥
宏 都 拉 斯
Honduras
Azores
Bahamas
Bahrain
50
60
60
50
50
香
匈
冰
印
印
伊
港
利
島
度
尼
朗
Hong Kong 50
多 明 尼 加
牙
Hungary
Ice land
India
Indonesin
Iran
50
50
50
50
50
加
貝
利
慕
杜
貝
Bangladesh 50
50
60
50
60
厄 瓜 多 爾
Babados
Belgium
Bermuda
50
50
60
埃
及
薩 爾 瓦 多
赤道幾內亞
衣 索 匹 亞
法 羅 群 島
玻 利 維 亞
伊
愛
曼
拉
爾
克
蘭
島
Bolivia
50
50
50
50
Iraq
50
50
波
巴
札
那
西
Botswana
Brazil
50
50
60
50
50
50
Ireland
Isle of Man 50
保 加 利 亞
裴
芬
法
濟
蘭
國
以
義
色
大
列
利
Bulgaria
Burma
Burundi
Fiji
Finland
France
French
Guiana
50
50
50
Israel
Italy
50
50
緬
蒲
甸
地
隆
象 牙 海 岸
Ivory Coast 50
高
棉
蓋
亞
比
那
牙
買
加
Cambodia
50
50
Jamaica
50
50
60
50
喀
加
麥
拿
隆
大
加
甘
德
彭
亞
國
日
約
肯
本
旦
亞
Cameroon 50
Gabon
50
50
50
Japan
Jordan
Kenya
Canada
CanaryIslan
d
Central
Africa Rep.
Ceylon
60
50
Gambia
Germany
康那利群島
中非共和國
50
迦
納
韓
科
黎
國
特
嫩
50
50
50
Ghana
50
50
50
Korea
60
50
50
錫
查
蘭
德
直 布 羅 陀
大 不 列 顛
威
巴
Gibraltar
Great
Britain
Kuwait
Lebanon
Chad
Channel
Island
海 峽 群 島
希
臘
賴
索
托
50
Greece
50
Lesotho
50
English - 52
Download from Www.Somanuals.com. All Manuals Search And Download.
Region/Country
Chinese English
Region/Country
Region/Country
Chinese English
賴 比 瑞 亞
Chinese
English
智
利
盧
利
亞
堡
格
陸
蘭
曼
Chile
Libya
50
50
Greenland 50
Oman
Liberia
60
50
60
比
森
阿
敘
大
利
溪
亞
地
50
50
Syria
Tahiti
巴 基 斯 坦
Luxembourg 50
Pakistan
R.O.C.
Taiwan
Tanzania
澳
門
巴
巴
秘
拿
拉
馬
奎
魯
中 華 民 國
坦 尚 尼 亞
Macao
50
50
50
Panama
Paraguay
Peru
60
50
60
60
50
50
馬得拉群島
馬 約 卡 島
Madeiral
Majokca
Island
泰
國
Thailand
Togo
Rep.of
Tonga
Trinidad
Tobago
Tunisia
Turkey
Uganda
USA.
馬 拉 加 西
菲
律
蔔
賓
多哥共和國
60
Malagasy
50
Philippines
50
馬
拉
威
波
葡
蘭
牙
東
千
他
加
達
哥
Malawi
50
50
50
50
Poland
50
〞
60
50
50
50
50
50
60
60
50
50
50
60
馬 來 西 亞
里
巴
Malaysia
Mali Rep.
Malta
Martinique 50
Mauritania 50
Portugal
Puerto Rico
Qatar
Rhodesia
Romania
Rwanda
Saudi
馬
馬
利
他
波 多 黎 各
爾
科
托
突 尼 西 亞
馬丁尼克島
茅里塔尼亞
模 里 西 斯
羅 德 西 亞
羅 馬 尼 亞
土
烏
美
耳
干
其
達
國
盧
沙
阿
安
烏
拉
達
地
Mauritius
50
50
60
墨
摩
西
那
哥
哥
蘇
聯
Mexico
60
USSR
50
50
50
50
伯 Arabia
United
Kingdom
Upper
Volta
蘇
格
蘭
英
上
烏
國
塔
奎
Monaco
50
Scotland
Senegal
50
50
50
蒙特色納島
塞 內 加 爾
伏
拉
Montserrat 60
Sierra
Leone
Singapore
Somalia
South
摩
洛
哥
獅
新
子
加
山
坡
Morocco
50
Uruguay
莫 桑 鼻 克
委 內 瑞 拉
Venezuela 60
Mozambique 50
50
50
尼
泊
爾
索 馬 利 亞
越
南
Nepal
50
Viet-Nam
Virgin
Island
Western
Samoa
50
荷
爾
南非共和國
維爾京群島
西 薩 摩 亞
葉 門 亞 丁
Netherlands 50
50
50
50
60
Africa Rep.
New
Caledonia
New
Zealand
新 蘇 格 蘭
西
班
牙
50
Spain
50
紐
西
蘭
斯 里 蘭 卡
50 Sri Lanka
Yeman(Aden) 50
尼 加 拉 瓜
蘇
蘇
丹
南
葉門阿拉伯
南 斯 拉 夫
Nicaragua
Niger
60
50
Sudan
Surinam
50
60
Yemen(Arab) 50
Yugoslavia 50
尼
日
利
Zaire Rep.
of
Zambia
奈 及 利 亞
史 瓦 濟 蘭
薩伊共和國
Nigeria
50
Swaziland
50
50
50
挪
琉
威
球
瑞
瑞
典
士
尚
比
亞
Norway
Okinawa
50
60
Sweden
50
50
Switzerland
English - 53
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Lenmar Enterprises Battery Charger PRO9V2 User Manual
Lenoxx Electronics Stove Optima 3 FS User Manual
LG Electronics Air Conditioner 3828A20025V User Manual
Logitech Stereo System Receiver User Manual
Lumens Technology Projector DC166 User Manual
Makita Grinder GA7030 User Manual
Marshall electronic Home Security System V DV PWR1 User Manual
Melitta Coffee Grinder MEBG8B User Manual
Mermaid Freezer REFRIGERATION FREEZER User Manual
Microsoft Video Game Console 52T 00232 User Manual