Loewe Flat Panel Television A 20 DVB T User Manual

Operating instructions  
TV  
Xelos A 20 DVB-T  
Xelos A 20  
Mimo L 20 DVB-T  
Mimo L 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound off/on  
Switch on from standby  
/switch off to standby  
Switching over to operate VCR  
Switching over to operate  
DVD players  
Switching over to operate the TV  
Picture menu on/off  
Sound menu on/off  
Timer functions  
Picture adjust  
Radio mode on/off  
Set picture format  
Select station directly  
/in the menu: enter numbers  
or letters  
Call AV selection  
Electronic Programme Guide  
(EPG) on/off(1  
No function  
Status display on/off  
/in the menu: back or hide menu  
Show/hide menu  
Index on/off  
Teletext mode on/off  
/in the menu: info texts on/off  
P+/P– select station up/down  
In the menu: select/set  
OK  
V–/V+ Volume quieter/louder  
Station table on  
Red button:  
No function  
Green button:  
Personal/factory values  
for picture and sound  
/in the menu: confirm/call  
Blue button:  
programme info  
Yellow button: last station  
No function  
In the menus: Connections  
/initial installation - back  
(1 only for DVB-T models and  
DVB-T stations.  
Alternative  
remote control  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control unit  
Indicator:  
red = standby  
green = operation  
Call the menu,  
in the menu: up ꢀ  
orange = operation without screen display  
(e.g. for radio operation)  
Channel up,  
in the menu: right ꢁ  
Channel down,  
in the menu: left ꢂ  
Radio on/off (back to TV mode),  
Switch TV set on/off  
to standby  
in the menu: down ꢃ  
- 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to rear panel - Xelos A20 / Mimo L20  
Input S-Video  
Headphone socket  
Input Video  
Audio inputs  
white: left  
red: right  
On/Off button  
(mains voltage)  
AV 2  
Socket  
Euro-AV 2  
Service  
Connect  
service  
AV 1  
Socket  
Euro-AV 1  
ANT VHF/UHF  
Antenna socket  
TV/FM Radio  
AUDIO OUT  
220 - 240 V ~  
L
R
Audio outputs  
white: left  
red: right  
5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to rear panel - Xelos A20 DVB-T / Mimo L20 DVB-T  
Input S-Video  
Headphone socket  
Input Video  
Audio inputs  
white: left  
red: right  
On/Off button  
(mains voltage)  
ANT VHF/UHF  
Antenna socket  
TV/FM Radio  
Service  
Connect  
service  
Antenna output  
DVB-T tuner  
AV 1  
Socket  
Euro-AV 1  
Antenna  
connecting  
cable(1  
DVB-T  
Antenna socket  
DVB-T  
AUDIO OUT  
220 - 240 V ~  
L
R
Audio outputs  
white: left  
ret: right  
(1  
If the set is connected to an antenna system in which the digital (DVB-T) and analogue antenna signals are distributed together house internally, a connecting cable  
must be plugged as illustrated. The antenne bridge then makes the connection with the analogue tuner.  
In all other cases, connect your antennal(s) as described on page 9.  
- 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Thank you  
Installation options  
for choosing a Loewe product.  
We are happy to have you as a customer.  
as a desktop unit  
At Loewe we combine the highest standards of technology, design and user  
friendliness. This applies equally for TV, video and accessories.  
Neither technology nor design is an end in itself, but both are intended to pro-  
vide our customers with the best possible audio and visual experience.  
We have designed the TV set in such a way that it is easy to operate with  
menus. Information about settings in menus is shown automatically for fast  
comprehension of the situation.  
You will nd the answers to many of your technical queries in the index of your  
TV. If it is a matter of operating the TV, you can access a function directly from  
the index. This saves you from having to read through detailed operating in-  
structions and is the reason, why this operating manual only explains the most  
important operating steps.  
Use the base included in delivery.  
as a wall-mounted unit  
• Wall holder WM35, Loewe order no. 65495A00.  
• VESA adapter, Loewe order no. 89691A00  
as a freel-standing unit  
• Flat-TV F-Stand 2, Loewe order no. 63495A00.  
Cleaning  
Use only a soft, clean, damp cloth to clean the TV, LCD screen and remote  
control (don’t use any caustic or abrasive cleaning agents).  
Features  
You can nd out the features of your TV set by calling Index - Integrated fea-  
tures (call up by pressing the INFO key in TV mode, while no menu is displayed).  
With the remote control RC4, you can operate three Loewe units, this TV, a  
Loewe video recorder and a Loewe DVD player.  
Disposal  
Packing and box  
You have chosen a long lasting technical product of very high quality. We have  
paid a fee to authorised recyclers who will collect the packing from your dealer  
for disposal, pursuant to domestic regulations. Nevertheless, we recommend  
you to keep the original box and packing material for optimum protection if you  
have to transport the set.  
Transporting  
Only transport the unit in an upright position. Hold the set by the top and bot-  
tom edges of the housing. The LCD screen is made of glass and/or plastic and  
may break if not handled carefully. Should the LCD screen become damaged  
or should the liquid crystal begin to leak, then it is imperative you wear rubber  
gloves when removing the set. Should the liquid come in contact with your skin,  
thoroughly rinse with water immediately.  
The set  
Attention: The EU directive 2002/96/EC regulates the proper  
way to recycle, handle and utilise used electronic devices.  
Hence, all used electronic devices are to be disposed of  
separately. Please do not dispose of this set in the normal  
household rubbish.  
Note on LCD screen  
The screen you have purchased meets the highest quality requirements in this  
segment and has been tested for pixel errors. Despite the utmost caution in pro-  
duction of the sets, it cannot be totally ruled out that some of the pixels might  
be defective for technological reasons.  
Please understand that such effects cannot be considered as a unit defect in  
the sense of the warranty as long as they are within the limits specied by the  
standard.  
You may return your used set free of charge at designated  
recycling centres or at your specialist dealer whenever you purchase a new,  
comparable set. You can nd out more about recycling (also for countries out-  
side the EU) from your local government.  
7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For your safety  
For your safety and to avoid unnecessary damage to your TV set, please  
read and observe the following safety instructions:  
Only use original accessories if possible, e.g. Loewe wall holders and stands.  
Never let children handle the TV unattended.  
Do not allow children to play in the immediate vicinity of the TV, they could  
knock, shift or pull it over and injure someone.  
Never leave the TV on unsupervised.  
This TV set is designed exclusively for reception and reproduction of video  
and audio signals.  
This equipment is designed for domestic and ofce environments and must  
not be used in rooms with high humidity (e.g. bathroom, sauna) or high  
concentrations of dust (e.g. workshops). If the equipment is used in the  
open air, ensure that it is protected against moisture (rain, drips, splashes,  
sprayed water or dew). Do not place any containers lled with liquids or lit  
candles on top of the TV.  
High levels of moisture and concentrations of dust cause leakage currents in  
the equipment, which can lead to danger of electric shock or re.  
The manufacturer‘s warranty is only valid for use in the specied permissible  
environment.  
Do not install the TV where there may be vibrations. Vibrations can lead to  
material stress.  
Pull out the power and antenna cables during thunderstorms. Surge volt-  
ages caused by lightning strikes can damage the TV through the antenna  
system and the mains. Also remove the antenna and mains plugs in long  
periods of absence.  
The mains plug of the TV set must be easily accessible so that the set can be  
disconnected at any time.  
Lay the mains cable in such a way that it will not be damaged. The power  
cable may not be kinked or laid over sharp edges, not stood on and not ex-  
posed to chemicals, the latter also applies to the device as a whole. A mains  
cable with damaged insulation can lead to electric shocks and is a re risk.  
If you have moved the TV set out of the cold into a warm environment, leave  
it standing for about an hour since condensation may form.  
This equipment must only be connected to a mains power supply which has  
the same voltage and frequency as that specied on the rating plate; use  
the power cable provided. Incorrect voltages can damage the equipment.  
When removing the mains plug, pull the plug housing and not the cable.  
The wires in the plug could be damaged and cause a short circuit the next  
time it is plugged in.  
Like all electronic equipment, your TV needs air for cooling. Obstruction  
of the air circulation can  
cause res. Therefore the  
air vents on the back must  
100 mm  
always be kept free. Please  
do not place newspapers or  
cloths on/over the TV.  
100  
mm  
100  
mm  
If the TV is placed in a cabi-  
net or on a shelf, leave at  
least 10 cm at the sides and  
10 cm at the top to ensure  
sufcient air circulation.  
Position the set so that it is  
not exposed to direct sunlight and additional heating from radiators.  
Prevent any metal parts, needles, paper clips, liquids, wax or the like from  
getting into the TV set through the air venting slits in the rear panel. This  
can lead to short-circuits and possibly to re. If something should get into  
the inside of the TV set, pull out the plug immediately and notify customer  
service.  
Never remove the back of the TV set yourself. Repair and servicing of your  
TV set should only be carried out by authorised TV technicians.  
Place the TV set on a level, rm base. The set should not protrude at the  
front when installing in cabinets or shelves.  
- 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial installation  
Antenna  
Remote control  
Connect the cable system on the back of the set to the ANT VHF/UHF socket.  
If separate antenne exist for the radio and TV reception, the two antenne must  
be connected by an antenna switch. Appropriate antenna switches are available  
from your dealer.  
Batteries  
To insert or change the batteries press on the arrow. Slide the battery compart-  
ment cover downwards and remove it. Insert Alkali Mangan LR 03 (AAA) batter-  
ies and ensure that the + and – ends are connected correctly.  
Slide the cover upwards to shut.  
In DVB-T models, connect the DVB-T antenna to the DVB-T socket and connect  
a FM (VHF) antenna to the ANT VHF/UHF socket if necessary (please remove  
any plugged antenna bridge, see page 6).  
Lay the cables in the cable holder in the rear middle of the TV set.  
ANT  
+
220 - 240V~  
VHF/UHF  
+
Xelos A 20  
Mimo L 20  
TV  
R
Information for the disposal of batteries  
220 - 240 V ~  
220 - 240V~  
The batteries provided contain no harmful materials such as  
cadmium, lead or mercury.  
ANT  
VHF/UHF  
DVB-T  
Regulations concerning used batteries stipulate that batteries  
may no longer be thrown out with the household rubbish.  
Deposit any used batteries free of charge into the designated  
collection containers set up at commercial businesses.  
Set the remote control for operating the TV  
Xelos A 20 DVB-T  
Mimo L 20 DVB-T  
TV  
Press the TV button.  
TV  
R
How to operate other Loewe equipment is described on page 23.  
220 - 240 V ~  
If the reception conditions are good, then a room antenna may be used for  
DVB-T. Passive and active room antennas are available on the market. The pow-  
er is supplied for an active antenna via the antenna connection. For automatic  
programming or in “TV Menu – Connections – Antenna DVB-T,“ the distribution  
voltage (5 volts) is to be set correspondingly.  
It may be practical to use a nondirectional antenna. If the location is outside the  
normal transmitting range, then a unidirectional antenna may also be used to  
improve the reception quality.  
Connection  
Power mains  
Plug the small plug of the power cable into the mains socket on the  
back of the TV, the large plug into a a 220-240V/50–60 Hertz power  
outlet.  
You can nd out more on the digital stations that can be received in your area  
at your specialist dealer.  
9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial installation  
5. With OK you get an overview of which settings are to be used for the auto-  
matic programming.  
Switch On/Off  
6. Press the OK button again to start the station search. The set searches for,  
sorts and stores all receivable TV stations, according to your setting and the  
connected antenna.  
Press the On / Off button (mains voltage) on the right hand  
side of the set until it locks.  
The red indicator on the TV set now lights up (standby mode).  
7. When the TV stations are stored, an appropriate message is displayed.  
8. The radio stations are then searched for with OK.  
9. The TV set searches for, saves and sorts all radio stations which are receiv-  
able on your antenna system.  
10. When the radio stations are stored, an appropriate message is displayed.  
11. The station search is terminated with OK.  
Switch on the set with the switch integrated in the display. The  
green indicator now lights up (other operating possibilities,  
see page 11).  
It takes about 2 minutes after switching for the screen to reach full brightness  
due to the LCD technology.  
12. Finally log in your recorder, DVD player etc. and connect it with the TV set  
(also see page 21)  
If you will not be using the TV set for a long time, e.g. during a vacation, switch  
it off with the On/Off button (mains voltage). The set is then disconnected from  
the power supply.  
You can repeat initial installation at any time, e.g. after moving house.  
INFO  
Call the index with the INFO button.  
Automatic programming  
OK  
Select the index item “Repeat initial installation“.  
Automatic programming of the TV set is started the rst time you switch it on.  
Follow the menus  
By pressing the OK button in the direction of the arrow  
ꢀꢁꢂꢃ you select the setting ...  
OK  
Start with OK.  
OK  
... and conrm your settings with OK. You then go to the next  
menu.  
Channel sorting  
You can change the station sorting that was carried out automatically later at  
any time, see “TV menu – Settings – Channels – Change“.  
OK  
Back to the previous menu.  
1. First you have to select the menu language.  
In models without DVB-T, please continue with step 3.  
2. Press the OK button to go to the ”Signal source” menu. If you want to re-  
ceive terrestrial stations  
digitally (only in DVB-T  
models), select “DVB-T”,  
conrm with the yellow  
colour button. If you se-  
Signal source  
Antenna/cable  
DVB-T  
Mark/unmark  
Back  
OK  
Proceed  
lect ”Antenna/cable” as well, you can also search for and store conventional  
analog stations.  
3. For specic national station sorting and pre-settings, enter the location at  
which your TV is being used.  
In models without DVB-T, please continue with step 5.  
4. When you have selected ”DVB-T”, you go to the ”Antenna DVB-T” menu. If  
you are using an active antenna, mark “yes (5V)”.  
- 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial installation  
Daily operation  
Switch on from stand-by  
Directing DVB-T antenna  
(only for DVB-T models)  
On the set:  
If you use a room antenna to receive one or more DVB-T stations that have  
picture and sound interference, then you should change the location of where  
the antenna is set up.  
If the LED on the set glows red or orange:  
Press the display window to switch the set on.  
To help you direct your antenna or to help you determine the most suitable loca-  
tion to set up the antenna, your TV set has a display for the signal quality C/N  
and the signal strength Level.  
Consult your specialist dealer to nd out which channels and frequency bands  
(VHF or UHF) are used to broadcast the digital TV stations in your area.  
On any one channel, several digital stations are broadcast.  
If the red LED on the set is not alight:  
Press the On / Off button (mains voltage) on the right hand  
side of the set.  
Switch to stand-by:  
Press the display window, the LED changes colour from green  
to red.  
Select a TV channel  
1. Call the “TV menu“ via the MENU button.  
2. Use ꢀꢁ to select “Settings“, then use to select the menu line under-  
neath.  
3. Select “Channels“, then use to select the menu line underneath.  
Switch on/off with the remote control  
TV menu  
Settings  
INFO  
END  
Channels  
The set is on stand-by, the red LED is alight:  
OK  
Manual settings  
c search  
Autom  
Change  
Press the blue on/off button on the remote control to switch  
on the set or ...  
4. Select “Manual settings“ and call the menu using OK  
AV  
Manual settings  
Signal source  
Channel  
with a numeric key (0 – 9) or ...  
DVB-T  
E 05  
Antenna/cabl  
wxyz  
Frequency  
Name  
177.50 MHz  
Test  
C/N 96  
Level 99  
with the OK button.  
OK  
Search  
Store  
END  
INFO  
The green operating LED then lights up.  
5. For digital stations, select “Signal source – DVB-T“.  
Switch on radio mode:  
(see also page 18).  
6. Use the numerical buttons to specify the corresponding channel number.  
When you receive a digital station, the system displays the signal quality  
C/N via a bar/numeric value and the signal strength via Level. The anten-  
na‘s direction or position is best when the largest values possible are  
displayed (long bar) for the signal quality and signal strength.  
7. Direct the antenna so that the largest numerical value/bar size is reached.  
8. If no signal is found in the channel set, you can start the frequency search  
run by pressing the blue button within the band selected (VHF or UHF).  
9. Check the other channels one after another on which digital stations are  
broadcast terrestrially in your area.  
RADIO  
Press the Radio button.  
Switch off radio mode:  
RADIO  
Press the Radio button again or ...  
END  
press the button END.  
For the weakest station, direct the antenna so that the maximum numerical  
value/bar size is achieved.  
10. After you position or direct the antenna, we recommend to search for all the  
stations using the “Search wizard“ (TV menu – Settings – Channels – Auto-  
matic search).  
11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Daily operation  
3. Via the channel overview  
Changing channels  
OK  
Call the channel overview with OK.  
1. With cursor ring  
Channel overview  
12 WDR  
AVS  
AV2  
AV1  
P+ / P-: Channel up/down.  
OK  
13 BR  
14 HR  
0
1
2
3
4
5
6
7
8
9
VIDEO  
ARD  
15 MDR  
16 ARTE  
17 KIKA  
OK  
ZDF  
SAT.1  
RTL  
18 PHOENIX  
19 BR-ALPHA  
20 3SAT  
21 KABEL  
22 CNN INT.  
23 H O T  
24 TV 5  
VOX  
3SAT  
S–RTL  
N–TV  
DSF  
2. With the numeric keys of the remote control  
1 digit stations  
Press keys 0 – 9 for one second, and the station changes  
instantly.  
10 TM3  
11 PRO7  
25 TRT 1  
pqrs  
OK  
Switch over  
Select station  
Change programmes  
END  
0
9
-
MENU  
Or press button 0 – 9 briey, the station then changes after  
2 seconds (the station changes immediately when only 9 sta-  
tions are stored).  
OK  
Select station  
or  
2 digit stations  
AV  
abc  
After briey pressing the rst numeric button keep the second  
numeric button pressed for one second, the station then  
changes immediately.  
select with numeric buttons,  
call selected station.  
pqrs  
wxyz  
OK  
Or press both numeric buttons briey, the station then  
changes after 2 seconds. (the station changes immediately  
when only 99 stations are stored).  
Note: Digital DVB-T stations (only in DVB-T models) are marked by “D“.  
Calling up audio/video channel positions  
3 digit stations  
After briey pressing the rst and second numeric button keep  
the third numeric button pressed for one second, the station  
then changes immediately.  
OK  
via the station table:  
pqrs  
wxyz  
AV1 for playing a video device which is connected to the  
Or press the three numeric buttons briey, the station then  
changes after 2 seconds (the station changes immediately  
when only 199 stations are stored).  
EURO AV socket 1.  
AV2 for playing a video device which is connected to the  
OK  
EURO AV socket 2.  
(AV2 is not available in DVB-T models).  
The set has 200 TV memory locations and 3 audio/video memories (AV). DVB-T  
models have 2 audio/video memories (AV).  
AVS for playing a video device which is connected to the right  
hand side of the set at the ”S-Video input” or ”Video input”.  
OK  
Call with the OK button.  
(Further information can be found on page 22).  
- 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Daily operation  
General information about the menu  
operation  
OK  
or select “off“ with .  
TV menu  
Sound  
INFO  
END  
Loudness  
on  
We show you how to navigate with the menus with the TV menu as an example.  
You‘ll be able to see which ꢀꢁꢂꢃ to use from the dark blue box on the right.  
off  
If you want to make other audio settings, go up to “Loudness“  
with and select “other“ with ꢀꢁ for example. You can  
also move up further to “Sound“ with and select other  
settings in the TV menu.  
MENU  
Open TV menu (in TV mode).  
OK  
TV menu  
INFO  
END  
Sound  
OK  
Sound adjust  
Bass  
other ...  
OK  
Have the other audio settings displayed with OK. With  
ꢀꢁ select the audio setting, e.g. “Maximum volume“  
OK  
TV menu  
Sound  
signal Maximum volume  
26  
INFO  
END  
Sound adjust  
INFO  
END  
TV menu  
Picture  
Sound  
Connections  
Settings  
OK  
and mark the setting bar for maximum volume with .  
TV menu  
Sound  
Maximum Volume  
26  
Select the function in the TV menu, e.g. “Sound“ (for sound  
settings). With you move the menu items displayed on the  
right to the dark blue box, with the menu items displayed  
on the left.  
OK  
INFO  
END  
Set maximum volume with ꢀꢁ Information about the cur-  
rent setting is displayed in the top part of the screen when you  
press the INFO button.  
OK  
INFO  
END  
TV menu  
Sound  
Picture  
Connection  
Settings  
INFO  
You can hide the infos by pressing the INFO button again.  
Select the sound function below with , you will then see a  
list of the sound settings.  
You can increase the treble (values 1 to 12)  
or reduce it (values -1 to -12).  
OK  
TV menu  
INFO  
END  
Sound  
Listening mode  
Loudness  
Sound adjust  
normal  
Treble Bass  
For the audio settings also select the function with ꢀꢁ, e.g.  
“Loudness“ (for treble and bass increase at low volume).  
TV menu  
OK  
INFO  
END  
TV menu  
Sound  
ng mode Loudness  
off  
INFO  
END  
Sound  
Treble  
0
other ...  
Treble Bass  
other ...  
Bass  
Sound  
OK  
To switch on the Loudness function, mark with “on“.  
END  
To hide all menus, press the END button.  
TV menu  
INFO  
END  
Sound  
Loudness  
off  
You are now familiar with handling of the menus so that you can easily operate  
the TV with the other menus.  
on  
13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Daily operation  
Adjusting the sound  
Setting the volume  
With V- / V+.  
... select/set with ꢀꢁ.  
OK  
Picture settings: Picture adjustment (normal, intensive, soft), contrast, colour  
and sharpness. After ”others....” you will nd brightness, tint in NTSC, picture  
format (4:3, cinema, zoom, 16:9 zoom, 16:9), Move pict. up/down and movie  
mode (DMM).  
OK  
Volume  
24  
Operation on the TV set  
Switching channels on the TV set  
+ Channel up  
Sound off/on  
Sound off;  
Sound on: Press button again or ...  
– Channel down  
adjust volume with V- / V+.  
Other sound settings  
Volume, brightness, contrast, color and picture format  
Call the sound menu.  
TV menu  
Sound  
Sound adjust  
normal  
Direct control on TV set  
Volume  
24  
INFO  
END  
Brightness  
Contrast  
Picture format  
Listening mode Loudness Treble Bass  
Open the menu with M.  
Select the sound function to be set with ꢀꢁ and with to  
OK  
the appropriate selection...  
Direct control on TV set  
Contrast  
18  
Picture format  
TV menu  
Sound  
Brightness  
Service  
INFO  
END  
Listening mode  
Stereo  
ꢂ ꢂ Panorama  
Dolby Virtual  
Select the function to be set with – or +.  
... and select/set with ꢀꢁ.  
OK  
Direct control on TV set  
Contrast  
18  
Sound settings: Sound adjust (normal, Pop, Classical, Speech), Listening mode  
(Stereo, Panorama, Dolby Virtual), Loudness, Trebel, Bass.  
Under “other ...“ you will nd Sound via (TV or HiFi), Loudspeaker sound, AV  
audio signal, Maximum volume.  
With R to the appropriate setting/selection.  
Brightness  
24  
Setting the picture  
Set/select with – or +.  
Open the Picture menu.  
TV menu  
Picture  
INFO  
END  
With M you go back up one level and can select other functions with – or +.  
Contrast  
other ...  
Colour Sharpness  
Picture adjust  
normal  
Select the picture function to be set with ꢀꢁ and with to  
OK  
the appropriate selection...  
TV menu  
INFO  
END  
Picture  
Colour  
6
- 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Modes of operation  
Open index  
TV mode  
INFO  
Open index.  
In initial installation and daily operation, the TV set is in TV mode. This is also  
the case when none of the other modes of operation such as EPG, Teletext or  
Radio has been selected. Each of these modes of operation has a menu, which  
you can call with the MENU button and with some color button assignments.  
In the "Language" menu you can select your menu language for  
operating the TV set.  
Functioning of the colour buttons in TV mode  
Index  
Language  
1/2  
OK  
red: no function  
Additional functions  
Channels  
Connections  
green: call personal values/factory values for picture and  
sound, save picture and sound values as personal values.  
Integrated features  
Parental lock  
Picture Setting  
Programme info  
END  
INFO  
END  
Standard settings  
Call up personal settings  
OK  
P+/P- Page / ꢁ  
OK  
Activate  
Call up factory settings  
yellow: call last viewed channel. You can switch back and  
forth quickly between two channels with this button.  
The index answers many questions, concerning your TV set. If you have a ques-  
tion about the operation, you have direct access to it from the index.  
This set is delivered in different variants. You can nd out what equipment your  
TV has under the menu item “Integrated features”.  
blue: call programme info  
(for DVB-T stations(1 the EPG with the current station info is  
called, see page 19).  
Select picture format  
301  
301 ARD-Text Mo 05.12.05  
16:16:42  
Mo 05.12.05 Das Erste  
If you want to set a different format, press this button until the  
desired format is selected or select the format with ꢀꢁ.  
05.30 ZDF-Morgenmagazin  
09.00 heute  
09.05 Die glückliche Familie  
Tami in Gefahr  
09.55 ARD-Wetterschau  
Picture format  
4:3  
cinema zoom zoom 16:9 16:9  
10.00 heute  
10.03 Verstehen Sie Spaß?................................314  
Mit Frank Elstner  
12.00 heute mittag  
12.15 ARD-Buffet................................................315  
13.00 ZDF-Mittagsmagazin................................312  
Moving the picture vertically  
To reveal picture captions, the picture can be moved vertically  
up and down with ꢃꢂin the “Cinema” and “Zoom” picture  
formats. The vertical moving of the picture is only possible  
when the picture format menu is displayed and the appropri-  
ate picture format has been set.  
300 <<  
Nachmittag > 302  
morgen  
OK  
morgen  
+
Page selection  
Show status display  
END  
Show/hide status.  
1
ARD  
Stereo  
14:42  
Alarm time 06:30  
If other languages are broadcast by DVB-T stations(1 the “Lan-  
guage/Sound Selection” is displayed under the station display.  
Call the Language/Sound selection with the green colour but-  
ton and select with ꢃꢂ. Conrm the setting with OK.  
OK  
If DVB-T stations(1 offer subtitles, “DVB subtitles” is displayed  
under the station display. Call the setting for DVB subtitles  
with the yellow colour button and select the options with  
ꢃꢂ. Conrm the setting with OK.  
OK  
(1 only for DVB-T models.  
15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Modes of operation  
Under “Settings“ you will nd the following functions:  
TV menu  
Channels  
MENU  
Call up TV menu.  
• Automatic search • Manual settings • Change  
Parental lock  
If you do not want your children to be able to use the TV unsupervised, activate  
the parental lock by entering a four-digit access code. You can change or delete  
this access code in the ”Parental lock” menu (see also page 28).  
Switch the set to stand-by after entering the access code or switch it off with  
the On/Off button (mains voltage). When switching on the set only shows a  
picture when you enter your access code.  
Timer functions  
INFO  
END  
TV menu  
Picture  
You can have your TV switch off at pre-programmed times or wake  
you/remind you with radio or TV. If you are not present at the time, a safety  
prompt makes sure the TV switches off again after 5 minutes.  
• TV off once only • One-time reminder • Wake up (Mo - Su)  
• Wake up with TV or Radio • Wake up volume  
Sound  
Connections  
Settings  
You will nd a description of the picture and sound settings on page 14. The TV  
menu offers other settings for the TV set and for connected devices.  
Select devices to be connected under “Connections”:  
Time and date  
When you receive teletext, the correct date and time setting is picked up by the  
set automatically. The time is for information for timing services, e.g. alarm. If  
you do not receive teletext you have to set the date and time manually.  
Use the numeric buttons on the remote control and the arrows ꢀꢁto move  
from one digit position to the next.  
For example video recorder, DVD player/recorder, camcorder/digital camera or  
Pay-TV decoder.  
1. Select the connection (AV1, AV2(1 or AVS) to which you want to connect the  
device.  
In the time and date menu you can also set when you want the TV set to auto-  
matically start and end daylight saving. You can also set a deviation UTC.  
2. Conrm with OK.  
3. Select the device type , e.g. DVD and the signal type CVBS in the list which  
appears.  
Language  
You can set the language in which the menus are displayed under Settings  
- Language.  
4. Conrm with OK.  
5. Specify which colour standard (e.g. PAL) the connected device transmits the  
signal with. Note: The signal cannot always be displayed correctly when the  
“Colour standard Automatic” is selected.  
If “your“ menu language is not set, you may have to select the “Language“  
menu in a language you cannot understand:  
6. Conrm with OK.  
1. Press the INFO key while no menu is displayed. The index appears.  
2. Select the rst entry on the rst page (1/2), if it is not selected automatically.  
3. Conrm with OK.  
Other settings under ”Connections”  
7. ”RGB insertion yes” (via AV1) to play RGB signals e.g. from a games console  
on all channel positions.  
8. ”Switching voltage yes” so that the picture is immediately visible on the  
screen when playing back from a video device connected to the EURO-AV  
socket.  
You are now in the language menu and can select your language and enter it  
with ”OK”.  
(1 AV2 is not available in DVB-T models.  
- 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Modes of operation  
INFO  
Call contents page 100  
Teletext mode  
Teletext transmits information such as news, weather, sport, program  
previews and subtitles.  
OK  
Call the TOP table.  
The TOP table is a general list of teletext. You can only call the  
table on stations, which use the TOP operating system.  
TEXT  
Teletext on/off.  
100 100 ARD-Text  
ARD TEXT  
10.09.04  
14:14:42  
100 100 ARD-Text  
ARD TEXT  
10.09.04  
14:14:42  
Index  
> 101  
Teletext im Ersten  
Index  
> 101  
Teletext im Ersten  
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120  
Wird auch der Nahverkehr teurer? . . . . . . . . 121  
Australien: Keine Zugeständnisse . . . . . . . . 122  
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120  
Wird auch der Nahverkehr teurer? . . . . . . . . 121  
Australien: Keine Zugeständnisse . . . . . . . . 122  
Tote bei Zugunglück in Schweden . . . . . . . . 532  
TOP table  
Übersicht  
Wetter  
Vorhersage  
tagesschau  
OK  
Wetter
Städte  
Regional  
Reisen  
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204  
Formel 1: Schumacher erneut vorne . . . . . . . 213  
Sport 1  
TV Guide  
ARD heute  
int. Städte  
Tagesschau . . 110/112  
Wetter. . . . . . . . . . . 170  
Sport. . . . . . . 200/600  
TV Guide . . . 300/400  
Kultur. . . . . . . . .  
Gesellschaft . . . 530  
Lotto/Toto . . 666  
Wirtschaft. . . . . . 700  
500  
ARD morgen  
Biowetter  
FS-Sendungen  
TV Guide 2  
weitere . . .  
Content  
tagesschau  
+
END  
OK  
view  
Select a topic area with ꢂꢃ.  
Select the Topics column with .  
Select topic with ꢂꢃ ...  
Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your TV  
supports both these systems. The pages are divided into topic groups and top-  
ics. After switching on the teletext, up to 252 pages are stored for fast access.  
OK  
OK  
... and display page with OK.  
Page selection with the coloured buttons  
The coloured bars (in TOP) or the coloured writing (in FLOF) in the penultimate  
row show you which coloured buttons to use, to scroll to topic groups and  
topics.  
pqrs  
wxyz  
Enter the page number directly.  
red:  
page back (not in FLOF).  
Displaying teletext pages  
green:  
yellow:  
blue:  
page forward (not in FLOF).  
to the next topic (only in TOP and FLOF).  
AV  
Stop self-turning pages (HOLD).  
to the next topics area (only in TOP and  
FLOF).  
wxyz  
ZOOM page top part – bottom part – normal size (press but-  
ton several times).  
Other page selection options  
OK  
Mark a specied page number on the page (Page Catching).  
Tagesschau . . 110/112  
Kultur. . . . . . . . . 500  
Gesellschaft . . . 530  
Wetter. . . . . . . . . . . 170  
Sport. . . . . . . 200/600  
TV Guide . . . 300/400  
Lotto/Toto . .  
666  
Wirtschaft. . . . . . 700  
Sub-pages:  
OK  
View  
OK  
Call.  
17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Modes of operation  
Teletext menu  
Radio mode  
MENU  
Call the Teletext menu.  
RADIO  
You can switch radio operation on and off with the  
100 100 ARD-Text  
ARD TEXT  
10.09.04  
14:14:42  
RADIO button on the remote control or ...  
Index  
> 101  
Teletext im Ersten  
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120  
Wird auch der Nahverkehr teurer? . . . . . . . . 121  
Australien: Keine ZugestŠndnisse . . . . . . . . 122  
Tote bei ZugunglŸck in Schweden . . . . . . . . 532  
R on the operating ring on the TV.  
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204  
Formel 1: Schumacher erneut vorne . . . . . . . 213  
INFO END  
Teletext menu  
You see a station table of the radio stations.  
OK  
Reveal  
Settings  
Radio mode:  
5
ROCK ANT  
Pop  
7
8
9
DLR  
DLF  
Here you will nd functions such as:  
HR-INFO  
10 MDR INFO  
11 MDR FIGA  
12 NDR KULT  
13 SWR1  
1
2
3
4
5
6
B5 AKTL  
• “Reveal” concealed information, e.g. VPS pages in the station table pages  
• In the Settings you will nd menus to dene the preview pages, subtitle  
pages and the character set.  
BAYERN 1  
BR4 KLSK  
SUNSHINE  
ROCK ANT  
ANTENNE  
14 SWR2  
OK  
15 WDR3  
16 WDR5  
OK  
9
MENU  
END  
Switch over  
0
Select station  
Scan stations  
Previous station  
Screen off  
-
You can switch off the screen with the red button. The LED on the TV changes  
from green to red. You can switch the screen display back on with the red or the  
END button on the remote control or with R on the operating ring of the TV set.  
Station switching with dark screen: with – or + on the operating ring on the TV  
set or with the remote control P– and P+ or with the numeric buttons.  
The Sound menu can be called with the  
button in radio mode.  
Radio menu  
MENU  
Call Radio menu.  
INFO  
END  
Radio menu  
Sound  
Channels  
Timer functions  
In the Radio menu, as in TV mode, you can:  
• Set the sound  
• Search for radio channels and store them (automatically or manually), delete,  
move or rename them.  
• Set timer functions.  
- 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Modes of operation  
Blue coloured key: Call Select date/time/stations/topics  
EPG - Programme guide  
(only for DVB-T stations)  
EPG (Electronic Programme Guide)  
Tue. 10.09.  
Tue 10.09./14:14  
Date  
Time  
now  
soon  
EPG is an electronic program guide. With this system, you can easily nd the  
stations that interest you (sorted according to date, time, channel and topic)  
and tag these stations if required.  
Channels  
Topics  
all  
all  
06:00-06:20 ZDF  
06:00-06:30 RTL  
06:00-06:25 Kabel 1  
06:00-06:25 N3  
06:00-06:30 BR  
06:00-06:30 WDR  
Die Blobs  
Wunderbare Jahre  
Dennis  
Extra en español (5)  
Goal. Speak English, Play Football  
Lokalzeit Südwestfalen  
Using the EPG  
EPG  
Switch EPG on/off  
06:00-07:10 SuperRTL Infomercials  
06:00-07:10 Kinderkan Reif für die Dodo-Insel (25)  
EPG (Electronic Programme Guide)  
Date Tue 10.09.  
Time now  
Tue 10.09./14:14  
14:00-14:20 9LIVE  
Reisetraum  
Comedyserie - Kandidaten mit gewissen Fehlern  
all  
all  
Channels  
Topics  
END  
Change to programme list  
MENU  
13:20-14:15 Kabel 1  
13:30-14:15 H3  
13:55-14:20 Kinderkan Blaubär & Blöd (37)  
14:00-14:15 ZDF  
14:00-15:00 RTL  
14:00-15:00 Sat 1  
14:00-15:00 Pro7  
14:00-14:30 N3  
Die Waltons  
ARD-Buffet  
Use ꢂꢃ to select the menu line for the date, time, stations or topics. Use  
heute - in Deutschland  
Das Strafgericht  
Zwei bei Kallwass  
ꢀꢁ to select within the menu line.  
If, for example, you are looking for the next news, select today’s date, “Soon“  
under Time, “All“ under Stations and “News“ under Topics.  
Das Geständnis - Heute sage ich al  
DAS! ab 2  
14:00-14:20 WDR  
Familienserie - Sturzflug  
Die kleinen Strolche (10)  
Then you get a list of all news programmes in the programme list below.  
OK  
END  
View  
Select date, ..., topics MENU  
EPG (Electronic Programme Guide)  
Date Tue 10.09.  
Tue 10.09./14:14  
P+/P–  
Page /ꢁ  
Time  
Channels  
Topics  
soon  
KABEL 1  
News  
The programme guide menu is divided into two areas: at the top, you can  
make the settings for the programme list (date, ..., topics); on the bottom, the  
programme list is displayed. Use the blue coloured key to switch between the  
two areas to make your selections.  
All programmes currently running are listed initially in the programme list. With  
the ꢂꢃ buttons, select the programme you want to watch and switch over  
with the OK button.  
Show  
Nachrichten  
K1 Journal  
Spätnachrichten  
K1 Journal  
K1 Reportage  
Spätnachrichten  
Nachrichten  
K1 Journal  
Hobby  
Sport  
Child  
17:15-17:25 Kabel 1  
17:25-17:45 Kabel 1  
01:10-01:15 Kabel 1  
01:15-01:35 Kabel 1  
02:35-03:22 Kabel 1  
03:22-03:25 Kabel 1  
17:15-17:25 Kabel 1  
17:25-17:45 Kabel 1  
01:10-01:15 Kabel 1  
Nachrichten - News  
Spätnachrichten  
Use P+/P– to scroll up or down through the pages of the programme guide. In  
the selection lines for date and time above, you will see the time change when  
scrolling; when you scroll further, the date also changes. When the “Time” line  
is selected, you can enter the time as of which the programmes are to be dis-  
played; use the numeric buttons on your remote control to do this. Always enter  
four digits, such as 0900 for 9 a.m.  
If programmes are displayed which have not yet started, you can mark these  
with the OK button. The TV set then switches automatically to this station at the  
given time.  
END  
MENU  
Change to programme list  
If you want to mark one of these news programmes, return to the programme  
list using the blue coloured key, select the desired news programme by using  
ꢂꢃand mark this by using OK.  
In front of the programme’s title, the system places an . This station is  
switched later to this programme when the set is switched on. If the TV is off,  
it switches on again automatically at the beginning of the marked programme  
if this has been set in the EPG menu. If you are out, a security prompt prevents  
the TV set staying on unattended.  
You have direct access to the selection lines above to pre-select the day, the  
time, the station and the topic.  
Before leaving the upper selection lines using the blue coloured key, select a  
specic line. If you have switched back to the programme list, you can change  
this menu line using ꢀꢁ without having to leave the programme list.  
19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Modes of operation  
EPG menu  
Switch on TV at memo  
MENU  
Call EPG menu  
You can have the TV switched on automatically from standby at the beginning  
of the memorized program. If you are not present at the time, a safety prompt  
makes sure the TV switches off again after 5 minutes.  
INFO  
END  
EPG menu  
Station selection  
OK  
Switch on TV when marked  
The prerequisite for switching on is that “Switch on TV when marked” in the  
EPG menu is “yes”.  
You will nd the following settings in the EPG menu:  
• Station selection • Switch on TV when marked  
Station selection  
If you want certain stations not to appear in the program guide, you can select  
and deactivate these in the station selection. Call the station selection in the  
EPG menu.  
Station selection (EPG data available)  
1
2
3
4
5
6
7
8
ARD  
ZDF  
SAT.1  
RTL  
VOX  
3SAT  
S-RTL  
N-TV  
RTL2  
EUROSPORT  
PRO7  
WDR  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
BR  
HR  
MDR  
ARTE  
KIKA  
PHOENIX  
BR-ALPHA  
N24  
KABEL  
CNN INT.  
9 LIVE  
DSF  
OK  
9
10  
11  
12  
END  
OK  
Mark/unmark  
Mark all  
Mark only this  
INFO  
All stations are marked initially. These stations are then available for the  
evaluation in the program guide (prerequisite: EPG data are transmitted for the  
respective station).  
You can change the station selection with:  
OK  
Select/remove individual stations.  
green coloured button: All stations are selected.  
yellow coloured button: One station is selected. All selected  
stations are then removed.  
- 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating additional equipment  
Log in the device  
Connecting recorders  
1. Call the TV menu.  
1. Connect your antenna or cable connection to the recorder (1).  
2. Select “Connections“.  
2. Connect the recorder to the Euro-AV sockets on the TV set if possible (2).  
3. Select the free connection (AV1, AV2(1 or AVS).  
3. Connect the antenna output of the recorder to the antenna input of the TV  
set (3). The antenna signal is then available to both the tuner in the recorder  
and in the TV set.  
4. Select the device type you want to connect and its signal type in the connec-  
tion wizard, e.g. “VHS/8 mm....VCR“ for video recorder.  
5. Conrm with OK.  
6. Select the colour norm of the video device. If you do not know it, select  
”automatic”.  
7. Conrm with OK.  
Video playback  
You get the best picture and sound reproduction when the recorder, DVD player  
or camcorder is connected by an AV cable (Scart cable) to one of the AV sockets  
of the TV.  
When you are playing a video recorder, DVD player, camcorder or digital  
camera, select the AV socket to which the video device is connected with ”AV  
selection” (button 0 AV) or with the station table.  
Recorders transmit a switching voltage during playback which the TV set can  
decode (set Connections – Switching voltage to ”yes” in the TV menu). Then the  
picture of the recorder is shown at the current channel position during playback.  
Calling an AV program in the AV selection list  
3
AV  
Call AV selection.  
2
AV selection  
AV1  
OK  
AV2  
AVS  
OK  
1
Select AV socket for external video device.  
ENTREE  
ANTENNE  
EURO AV2  
DECODER  
AUDIO  
AERIAL  
SORTIE  
G
OUT  
L
SORTIE  
ANTENNE  
EURO AV1  
AUDIO/  
VIDEO  
OK  
Call with OK.  
D
R
RF OUT  
Now you will see the playback from the connected video device.  
220 - 240 V ~  
(1 AV2 is not available in DVB-T models.  
21 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating additional equipment  
Search for and store the station of the video recorder (if no Euro AV  
cable is available)  
Calling AV stations with the channel overview  
Switch on the test station on the VCR or insert a recorded tape and start play-  
back. In some video recorders the station must be switched on by activating the  
modulator.  
OK  
Call the channel overview with the OK button in TV mode.  
Channel overview  
Then call the AV selection on the TV set with 0 AV. Select the menu item “0  
VIDEO“ in the AV selection and call with OK.  
To prevent “normal” TV stations being found in the search, pull out the antenna  
plug from the antenna input of the VCR temporarily (the cable to the antenna  
system).  
If you cannot see the test station or playback from the cassette, the VCR is  
transmitting on a different channel. You then have to search for the station or  
set it manually.  
12 WDR  
AVS  
13 BR  
AV2  
14 HR  
AV1  
3
OK  
3
0
1
2
3
4
5
6
7
8
9
VIDEO  
ARD  
ZDF  
15 MDR  
16 ARTE  
17 KIKA  
SAT.1  
RTL  
18 PHOENIX  
19 BR-ALPHA  
20 3SAT  
21 KABEL  
22 CNN INT.  
23 H O T  
24 TV 5  
VOX  
3SAT  
S–RTL  
N–TV  
DSF  
10 TM3  
25 TRT 1  
11 PRO7  
OK  
Switch over  
Select station  
Change programmes  
END  
0
9
-
MENU  
1. Call the TV menu with the MENU button.  
You will always nd the AV sockets at the top of the list with-  
2. Select the “Settings“ menu item with ꢀꢁ.  
3. Select the line below it with and “Channels“ with ꢀꢁ.  
out station numbers.  
OK  
Select the AV socket.  
4. Select the line below with and “Manual settings“ with ꢀꢁ and call this  
menu with OK.  
OK  
Call with OK.  
5. For models without DVB-T:  
Select “UHF” in the “Range” menu item and enter “E30“ under the “Channel”  
menu item.  
For models with DVB-T:  
Now you will see the playback from the connected video device.  
Select “Antenna/Cable” in the “Signal source” menu item and enter “E30“  
under the “Channel” menu item.  
6. Start search with the blue button.  
7. If the station has been found, enter the name VIDEO, conrm with OK and  
save with the red button.  
8. A list of the stored stations is displayed.  
9. Select 0 (VIDEO) here and overwrite this program place with the red button.  
10.Hide the menu again with the MENU button.  
Plug the antenna plug back in.  
If you now get interference because a TV station is transmitting on the same  
channel as the VCR station, you have to change the transmitting station on the  
VCR and search for the VCR station on the TV again.  
- 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When operating in the VCR or DVD mode, the lamp above the VCR or  
DVD button lights.  
In DVD mode the following DVD players can be operated: Xemix  
6122DO, 8122DA und 6222PS.  
In VCR mode the following VCRs can be operated: ViewVision 8106H,  
8136H, 8176H.  
For other Loewe equipment than that listed, please use the original  
remote control.  
DVD Recorder Centros: with the enclosed remote control of the Loewe Centros  
DVD recorder it is also possible to control the TV functions.  
Functions for Loewe DVD players – Remote control RC4  
Functions for Loewe video recorders – Remote control RC4  
Sound off/on (mute)  
Operating VCRs  
Switch recorder  
on/off – in standby  
Operating DVD players  
TV  
SV  
VCR  
T-C  
DVD  
Operating the TV set  
Select picture and sound source  
Select video and audio input  
Display/close Timer list  
DISC-MENU  
SP/LP  
Display/close  
ShowView timer Menu  
Switch to Long Play  
/Standard Play  
RADIO  
000  
Set time display to 0:00:00  
Select station directly  
/in menu: enter digits  
abc  
def  
ghi  
jkl  
mno  
pqrs  
EPG  
tuv  
AV  
wxyz  
PIP  
Set picture format (TV)  
Call AV selection (TV)  
Status display on/off  
VCR menu on  
/in menu: back  
END  
P+  
in the menu: Close menu  
INFO  
Status display on/off  
TEXT  
Reverse play  
/in menu: select/set  
on playback: Slow motion forward  
/in the menu: select/set  
or to the next menu  
V–  
V+  
OK  
P–  
V–/V+ volume quieter/louder  
/
at stop: Program up/down  
on playback: manual tracking  
in the menu: Select position  
Call up station list  
/in menu: call up/confirm  
Fast forward  
Rewind  
/search forwards  
/search backwards  
Start playback  
Start recording  
Stop tape  
Pause (still frame)  
/frame-by-frame advance  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What to do, if ...  
Problem  
Possible cause  
Help  
The device cannot be operated.  
Parental lock is activated.  
Deactivate the parental lock: In the TV menu - Settings  
- switch off parental lock or enter secret code.  
General problems with connecting external devices a) The AV standard is set incorrectly  
a) Set the standard correctly  
b) Set the AV signal correctly  
via an AV input.  
b) The AV signal is set incorrectly  
If “Automatic“ is set for AV standard or AV signal, this  
can lead to faulty detection in the case of non-stand-  
ardized signals. Then the standard and the signal must  
be set according to the specications in the operating  
manual of the external device.  
No sound via the TV loudspeakers.  
In the Sound menu - other the item “Sound via ...“ Change setting to “TV“.  
is not set to “TV“.  
All menus appear in the wrong language.  
Wrong menu language set.  
1. Press the INFO key while no menu is displayed. The  
index appears.  
2. Select the rst entry on the rst page (1/2), if it is not  
selected automatically.  
3. Conrm with OK.  
You are now in the language menu and can select your  
language.  
Various characters are displayed incorrectly in  
teletext.  
The wrong character set is set in the Teletext  
menu.  
Set the correct character set: Teletext menu - Settings -  
Character set - Standard or the appropriate character set.  
- 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data  
Type  
Xelos A20  
Xelos A20 DVB-T  
Mimo L20  
Mimo L20 DVB-T  
Item No.  
65411 A60  
65411 A88  
65410 A60 / K60  
65410 A88 / K88  
Dimensions with foot WxHxD (cm)  
Dimensions without foot WxHxD (cm)  
53,8x53,9x25,7  
53,8x53,9x7,7  
53,8x53,9x25,7  
53,8x53,9x7,7  
50,0x53,9x25,7  
50,0x53,9x7,3  
50,0x53,9x25,7  
50,0x53,9x7,3  
Image format  
4:3  
4:3  
4:3  
4:3  
Image diagonal (cm)  
Pixel format  
51  
51  
51  
51  
640 x 480  
500:1  
176°  
640 x 480  
500:1  
176°  
640 x 480  
500:1  
176°  
640 x 480  
500:1  
176°  
Contrast ratio  
Angle of viewing horizontal/vertical  
Weight with foot (kg)  
Weight without foot (kg)  
9,9  
8,5  
9,9  
8,5  
9,8  
8,4  
9,8  
8,4  
Power consumption (Watt) IEC 62087  
Power standby (Watt)  
52  
56  
52  
56  
2,8  
2,8  
2,8  
2,8  
General  
Connections  
Ambient temperature  
0º – 40º Celsius  
Jack 3.5mm  
Mini-DIN (AVS)  
Cinch (yellow)  
2 x Cinch (white/red)  
2 x Cinch (white/red)  
Headphones 32–2000 Ohm  
Y/C (S-VHS / Hi 8)  
CVBS (VHS/8 mm)  
L / R  
Video IN  
Video IN  
Audio IN  
Chassis name  
Power supply  
L 2100 / L 2110 (DVB-T)  
230 V +15/–20% / 45-65 Hz  
Audio OUT (level adjustable)  
L / R  
Tuner  
VHF/UHF/cable  
41 MHz to 860 MHz  
200  
Hyper band 8 MHz  
Station slot memory  
TV standards  
IEC socket 75 Ohm  
IEC socket 75 Ohm(1  
IEC socket 75 Ohm(1  
Antenna / cable/FM Radio  
DVB-T  
B/G, I, L, D/K  
DVB-T antenna output  
DVB-T(1  
Colour standard  
Sound standard  
SECAM, PAL,  
EURO AV 1  
Video IN  
Y/C (S-VHS / Hi 8)  
CVBS (VHS/8 mm), RGB)  
NTSC-V, PAL-V (60Hz)  
mono/stereo/2-sound  
Nicam B/G, I, L  
Dolby Virtual  
2 x 2 Watt  
Video OUT  
Audio IN  
Audio OUT  
CVBS  
L / R  
L / R  
Rated audio power  
Teletext  
FM-Tuner  
EURO AV 2(2  
Video IN  
Y/C (S-VHS / Hi 8)  
CVBS (VHS/8 mm)  
CVBS  
Level 1.5  
87,5 – 108 MHz  
Video OUT  
Audio IN  
L / R  
Audio OUT  
L / R  
(1 only for DVB-T models.  
(2 AV2 is not available in DVB-T models.  
25 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Stand  
Use the Flat-TV F-Stand 2 , Loewe order no. 63495A00.  
Wall holder  
Use the wall holder WM35, Loewe order no. 65495A00.  
VESA adapter  
The VESA adapter offers you the possibility of also using your TV set for other  
VESA-compatible fastening devices.  
Loewe order no. 89691A00  
Note: Please only use the original LOEWE VESA adapter for your TV set and use  
the VESA-compatible fastening devices recommended by LOEWE.  
Loewe DVD players and recorders  
The DVD players and recorders from Loewe are characterized by form and colour  
which match Loewe TV sets, adapted user guidance and technology. A combina-  
tion of the two devices forms a system which offers many advantages.  
Subject to delivery options.  
- 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Loewe Austria GmbH  
Parkring 10  
1010 Wien, Österreich  
Tel.: +43 - 810/0810-24 (zum Ortstarif)  
Kjaerulff 1 A/S  
Loewe Italiana SRL  
Largo del Perlar, 12  
37135 Verona (VR), Italia  
Tel. +39 - 045 82 51 619  
Fax +39 - 045 82 51 622  
DSV TRADING SA  
Plac Kaszubski 8  
81-350 Gdynia, Polska  
Tel. +48 - 58 - 6 61 28 00  
Fax +48 - 58 - 6 61 44 70  
C.F. Tietgens Boulevard 19  
5220 Odense SØ, Denmark  
Tel. +45 - 66 13 54 80  
Fax +45 - 66 13 54 10  
International Dynamics  
Australasia Pty Ltd.  
129 Palmer Street  
Richmond 3121, Victoria, Australia  
Tel. +61 - 3 - 94 29 08 22  
Fax +61 - 3 - 94 29 08 33  
Gaplasa S.A.  
PL Trading (pz 2004) Ltd.  
27, Aliat Hanoar St.  
Givataiim 53401, Israel  
Tel. +972 - 3 - 57 27 155  
Fax +972 - 3 - 57 27 150  
Service Center Loewe  
Conde de Torroja, 25  
28022 Madrid, España  
Tel. +34 - 917 48 29 60  
Fax +34 - 913 29 16 75  
ul. Verkhnaya Maslovka, d. 29  
125083 Moscow, Россия  
Tel. +7 - 495 612 50 43  
Fax +7 - 495 612 47 10  
Kjaerulff 1 AB  
Loewe Opta Benelux NV/SA  
Uilenbaan 84  
2160 Antwerpen, België  
Tel. +32 - 3 - 2 70 99 30  
Fax +32 - 3 - 2 71 01 08  
Loewe Opta France S.A.  
13 rue du Dépôt,  
Parc del l‘Europe, BP 10010  
67014 Strasbourg Cédex, France  
Tel. +33 - 3- 88 79 72 50  
Fax +33 - 3- 88 79 72 59  
Mirage Holdings Ltd  
Flamingo Complex, Cannon Road  
Qormi, Malta  
Tel. +356 - 22 - 79 40 00  
Fax +356 - 21 - 44 59 83  
Ridbanegatan 4, Box 9076  
21377 Malmö, Sverige  
Tel. +46 - 4 06 79 74 00  
Fax +46 - 4 06 79 74 01  
BaSys Czech & Slovak s.r.o.  
Stará Vajnorská 17/A  
831 04 Bratislava, Slovakia  
Tel.: + 421 2 49 10 66 18  
Fax: + 421 2 49 10 66 33  
Telion AG  
Rütistrasse 26  
8952 Schlieren, Schweiz  
Tel. +41 - 44 732 15 11  
Fax +41 - 44 732 15 02  
SOMARA S.A.  
Kjaerulff 1 OY  
Artturinkatu 2  
20200 Turku, Finland  
Tel. +358 - 2 284 1600  
Fax +358 - 2 284 1601  
377, Rue Mustapha El Maani  
20000 Casablanca, Morocco  
Tel. +212 - 22 22 03 08  
Fax +212 - 22 26 00 06  
Jadran Trgovsko Podjetje  
Partizanska cesta 69  
6210 Sezana, Slovenija  
Tel. +386 - 57 31 04 40  
Fax +386 - 57 31 04 42  
HADJIKYRIAKOS & SONS LTD.  
Prodromou 121, P.O Box 21587  
1511 Nicosia, Cyprus  
Tel. +357 - 22 87 21 11  
Fax +357 - 22 66 33 91  
CableCom AS  
Gneisveien 12  
3221 Sandefjord, Norge  
Tel. +47 - 33 48 33 48  
Fax +47 - 33 44 60 44  
LinnSight Ltd.  
PO Box 8465  
KA 7 2YF Prestwick, UK  
Tel. +44 - 12 92 - 47 15 57  
Fax +44 - 12 92 - 47 15 54  
Enkay Elektronik Servis Müdürlügü  
Alemdag Cad: Site Yolu No.: 10  
Ümraniye/ Istanbul, Türkiye  
Tel. +90 - 216 634 44 44  
Fax +90 - 216 634 39 88  
Ing. Ivo Tietz  
Dolní nám. 9  
746 01 Opava, Česko  
Tel.: +420 553 624 944  
Fax: +420 553 623 147  
International Dynamics (NZ) Pty Ltd  
PO Box 109 317, Newmarket  
Auckland, New Zealand  
Tel.: +64 9 379 0179  
Fax: +64 9 379 0279  
E-mail: enquiries@internationaldynamics.  
co.nz  
SIBA Engineering S.A.  
6, Kisou Av.,  
122 42 Aegaleo, Hellas  
Tel. +30 - 210 - 5913793  
Fax +30 - 210 - 5317755  
Videonix (Pty) Ltd  
Loewe Opta GmbH,  
P.O. Box 31952, Kyalami 1684  
Republic of South Africa  
Tel. +27 - 1 14 66 47 00  
Fax +27 - 1 14 66 42 85  
Customer Care Center  
Industriestraße 11  
96317 Kronach, Deutschland  
Tel. +49 1801–22256393  
Fax +49 9261–99500  
Basys Magyarorszagi KFT  
Epitok utja 2–4  
2040 Budaörs, Magyar  
Tel. +36 - 23 41 56 37 (121)  
Fax +36 - 23 41 51 82  
Videoacústica  
Comercio e Representacoes de  
Equipamentos Electronicos S.A.  
Estrada Circunvalacao,  
Quinta do Paizinho, Arm. 5  
2795-632 Carnaxide, Portugal  
Tel. +351 - 2 14 24 17 70  
Fax +351 - 2 14 18 80 93  
© by Loewe Opta 060502  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in Germany  
TB/06/09/2.0  
Subject to modications!  
© by Loewe Opta 2006  
- 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Landice Home Gym 82020 User Manual
Lennox Hearth Indoor Fireplace MPLDV30 User Manual
Lennox Hearth Printer PB42 User Manual
Lenovo Laptop 267 User Manual
Lenovo Server 3072 User Manual
Lexicon Stereo Amplifier 070 14876 User Manual
Linear Bicycle Accessories HCI+2 User Manual
Linksys Network Card WUSB600N User Manual
LST Smoke Alarm 4351E User Manual
Mellerware Hot Beverage Maker 22751 User Manual