Loewe DVD Recorder Centros 1172 User Manual

Operating Manual

DVD

Centros 1102

Centros 1172

32122 DVD Rec_Centros_GB.indb 1

26.04.2005 11:23:03

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control RC3 – DVD operation

DVD

VCR

STB

Change-over switch

for operation of TV, VCR,

DVD or Set Top Box

Switch DVD player

on/off – in standby

Sound off/on

Marker search menu on

Repeat

-Set

-List

Set marker / in menu: highlights title/chapter

REC-MENU

RADIO

Zoom

Select camera position

Timer recording menu /

timer recording list menu on

in menu: enter digits /

in stop mode (menu off): select programme (TV)

abc

jkl

def

mno

wxyz

PIP

ghi

pqrs

tuv

Call AV selection (AV1-AV4,DV,TV)

Main menu on

DVD-AV

EPG

Picture in picture (PIP) on/off

Close menu

User interface of loaded DVD on

Info / menu bar on/off

in menu: switch between original and playlist

P+

Next chapter /

in stop mode (menu off): next programme

V–/V+ volume quieter/louder

in menu: select / adjust

V–

V+

Status display (TV, DVD-RW) /

in menu: cofirm the menu selection

Start of current chapter / previous chapter /

in stop mode (menu off): previous programme

P–

Insert a new chapter marker

ShowView menu on

Audio/Foto Card Reader operation on/off

Enter a new title thumbnail /

switch between photo and MP3 operation

Press short during playback: next chapter

Press short during pause: slow motion forward

Press long during playback: search forward

Press short during playback:

Start of current chapter /previous chapter

Press short during pause: slow motion back

Press long during playback: search back

Record

Stop

Playback

Pause /single frame

- 3

32122 DVD Rec_Centros_GB.indb 3

26.04.2005 11:23:09

Download from Www.Somanuals.com. All Manuals Search And Download.

Centros Front Panel

Power button

Disc tray

Display

Front ﬂap

Switch off in standby

(closed)

Disc tray

open/close

Press once: beginning of chapter / Stop

previous chapter /

Play Press once: next chapter

Press and hold: forward search

Input 4 /

DV IN

S-Video IN

Press and hold: reverse search

DVD

AUDIO/PHOTO

CARD READER

Front ﬂap

(open)

Pause /

Single

frame

Audio/VideoCar-

dreader

Record

VIDEO IN 4 /

AUDIO IN 4 L/R

SD / MMC / MS-

Format

- 4

32122 DVD Rec_Centros_GB.indb

26.04.2005 11:23:09

Download from Www.Somanuals.com. All Manuals Search And Download.

Centros Rear Panel & Display

EURO AV 2 DECODER

DIGITAL OUT

Digital, coaxial

audio output

COMPONENT VIDEO VIDEO OUT/AUDIO OUT VIDEO IN 3/AUDIO IN 3 (L/R)

AERIAL

SCART connection for an external

source (Decoder, Set-Top-Box, Video

Recorder etc.).*

OUT (Y Pb Pr)

(L/R)

Connection for an external source (Audio

Aerial connection

Connection for a TV

Connection for a TV with System, TV/Monitor, VCR, Camcorder etc.)

with component inputs video / audio inputs (Cinch) with video / audio inputs (Cinch).

(Cinch), *

EURO AV 1 AUDIO/ VIDEO OUTPUT switch

VIDEO Position RGB: EURO AV1 socket gives out the RGB signal and COMPO- Digital, optical audio

SCART connection for NENT VIDEO OUT socket does not supply a signal output

TV set Position COMPONENT: COMPONENT VIDEO OUT socket gives out the RGB

OPTICAL

Mains cable

RF. OUT

S-VIDEO OUT

Connection for a TV

with S-Video input.

Passes the

aerial signal

to the TV

signal and EURO AV1 socket does not supply a signal

* Please note the position of the switch here.

Caution: Do not touch the inner pins of connection sockets on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

CHP Displays the cur- BIL Indicates receipt of a BILINGUAL

TITLE Displays the

current title number.

TRK Displays the

current track number.

HQ, SQ, LQ, EQ

Displays the recording

mode

rent chapter number.

TV program.

DVD A + - R W

TITLE

TRK

CHP BIL

HQ SQ LQ EQ

REC

SVCD -RW

Disc type

Indicates the type of disc

that has been inserted

Shows if a timer recording has been

programmed and / or whether a

timer recording is in progress.

Character indicators

Clock, total playback time, elapsed time, title number,

chapter / track number, channel etc.

ST Indicates a

stereo broadcast is

being received.

REC Indicates whether

recording is in progress.

5 -

32122 DVD Rec_Centros_GB.indb

26.04.2005 11:23:09

Download from Www.Somanuals.com. All Manuals Search And Download.

Welcome

• There can be interference to the images and

sound of any nearby television, video recorder or

radio. If this occurs, do not place the unit near

to a television, video recorder or radio, or switch

the unit off after removing the disc.

• Install the DVD recorder where there is nothing

to obstruct the remote control‘s infrared signal

from reaching the DVD recorder display.

• Do not place strong artiﬁcial light sources in

front of the device. This may affect infrared

reception.

• If there is an electrical storm, disconnect the

antenna and mains plug. Power surges caused

by lightning strikes can damage the unit through

the antenna system or the mains.

• The antenna and mains should also be discon-

nected if the unit is to remain unsupervised for a

long period of time.

• The mains plug must be easily accessible so that

the unit can be disconnected at any time.

• Lay the cable in such a way that it cannot get

damaged. The power cable should not be kinked

or laid over sharp edges, not stood upon or

exposed to chemicals - the latter also applies to

the device as a whole. A mains cable with dam-

aged insulation can cause electric shocks and is

a ﬁre hazard.

• When removing the power plug, pull the body

of the plug, and not the cable. Otherwise, the

wires in the plug could get damaged and cause

a short circuit the next time it is plugged in.

Thank you

Disposal

for choosing a Loewe product. We are happy to

welcome you as our customer.

Cardboard box and packaging

You have opted for a durable and techni-

At Loewe we combine the highest standards

of technology, design and user friendliness. This is

equally true of TV, DVD, video, audio and acces-

sories.

Neither technology nor design is an end

in itself, but both are intended to provide our

customers with the best possible audio and visual

experience.

Our design is not inﬂuenced by short-term,

fashionable trends. You have, after all, purchased

a high-quality piece of equipment which you do

not want to get tired of looking at tomorrow or the

day after.

cally sophisticated product. In line with national

regulations regarding the disposal of packaging

materials, we pay a fee to authorised recyclers

who collect packaging from dealers. However, we

recommend that you keep the original cardboard

box and the rest of the packaging materials so that

the unit can, if necessary, be transported in the

safest possible conditions.

The unit

Important: The EU Directive

2002/96/EG governs the proper

re-acceptance, handling and

recycling of used electronic ap-

pliances.

Scope of delivery

Old electronic appliances must therefore be

disposed of separately. Never throw this set in the

normal domestic waste. You can hand in your old

set free of charge at identiﬁed collection points or

at your dealer if you buy a similar new set. Other

details about re-acceptance (also for non-EU coun-

tries) are available from your local administration.

• Loewe Centros DVD recorder

• RC3 remote control with 2 batteries

• Euro AV cable (Scart cable)

• Audio cinch cable

• Video cinch cable

• Antenna cable

• 1x DVD-RW disc

• this operating manual

You should also read and follow the safety advice

on the following pages.

Remote control batteries

You can use the remote control to operate four

units: as well as this DVD recorder, a Loewe televi-

sion, a Loewe video recorder and a set-top box

(STB).

The batteries provided contain no harmful materi-

als such as cadmium, lead or mercury.

Regulations concerning used batteries mean

that batteries may no longer be thrown out with

the household rubbish. You can dispose of used

batteries free of charge at the collection points in

commercial outlets. Your dealer will also have a

collection point for used batteries.

Set up

• Place the DVD recorder on a ﬁrm, level base.

• Do not place the DVD recorder in the vicinity of

sources of intense heat or in direct sunlight.

• When installing in a cabinet or enclosed shelf:

Leave about 2.5cm free space around the DVD

player for unhindered air circulation to prevent

build-up of heat.

- 6

32122 DVD Rec_Centros_GB.indb

26.04.2005 11:23:10

Download from Www.Somanuals.com. All Manuals Search And Download.

Welcome

Protect your DVD recorder from ...

Cleaning

Advantages of connection

to a Loewe TV set

• liquids and damp

• Only clean your DVD recorder with a damp, soft,

clean cloth (with no aggressive cleaning agents).

• If DVD recorder fails to read the disc correctly,

the reader unit in the device may be soiled. Use

a commercially-available cleaning disc.

• shock and mechanical stress

• magnetic and electrical ﬁelds

• cold, heat, direct sunlight and extreme ﬂuctua-

tions in temperature

You can use Digital Link to install the DVD

recorder e.g. in an enclosed rack or a wall unit,

without there being direct visible contact with the

DVD recorder. Using the DVD remote control, you

can operate the DVD recorder via the Loewe televi-

sion. To do this, Digital Link must be switched on

at the DVD recorder (see page 17).

If you want to make timer recordings from the

satellite tuner in the television, the recording is

controlled by Digital Link.

• dust

• Always keep the disc drawer closed to prevent

dust getting into the drawer and onto the lens.

• anything which obstructs ventilation

• manual interference with the unit‘s interior

For your safety

Your Centros has only been designed for use in a

domestic environment. The warranty covers this

normal use of the DVD recorder.

For your own safety and to avoid unnecessary dam-

age to your unit, please read and follow the safety

advice below:

PLEASE NOTE: TO AVOID RISK OF ELECTRICAL

SHOCK, DO NOT REMOVE THE COVER (OR THE

REAR OF THE UNIT). THERE ARE NO PARTS INSIDE

THE UNIT THAT CAN BE REPAIRED BY THE USER.

REPAIRS SHOULD ONLY BE CARRIED OUT BY A

LOEWE DEALER.

Digital Link Plus enables channel data to be

transferred from the television‘s satellite and cable

channels to the DVD recorder, so that the same

channels appear in the same channel position.

This means that timer recordings of satellite and

cable channels can easily be programmed from

the television using the EPG (Electronic Program

Guide). The timer data is copied to the DVD re-

corder, which then, independently of the television,

carries out the timer recording. With timer data for

satellite stations, the television starts and stops the

DVD recorder and sets it to the Euro AV 1 input.

If playback begins, this is immediately shown on

the television, no matter which TV channel you are

currently watching (if the television is switched off,

it will automatically switched on).

• This DVD recorder is only to be used for receiv-

ing, displaying and playing visual and sound

signals.

• Switch off your DVD system (Centros, TV and

any other audio components which may be

connected) before connecting or disconnecting

other devices or speakers.

If you have moved the DVD recorder from a

cold to a warm environment, leave it to stand for

about an hour because of the risk of condensation

building up. Do not switch it on until it has reached

room temperature. This will avoid seriously damag-

ing the components.

• Do not open up the housing, or you could be

directly exposed to the laser beam. The laser

beam will be visible if the unit is open.

DO NOT LOOK INTO THE LASER BEAM.

Read this operating manual, and experiment with

your new equipment‘s features so that you are

familiar with it.

7 -

32122 DVD Rec_Centros_GB.indb

26.04.2005 11:23:10

Download from Www.Somanuals.com. All Manuals Search And Download.

Essential Information

Regional code of the DVD recorder and

DVDs

Writable Discs

Playable Discs

This DVD recorder can only play

Region “2“ or “all“ coded DVDs. The

region code on the label of some

DVDs shows which type of DVD

DVD-RW (Digital Video Disk

- ReWritable)

Video-DVD

These discs can be written to several

times. Recordings can be deleted and

the disc can then be rewritten.

recorder can play those discs. If you

play other discs the error message “Incorrect region

code. Playback not possible.“ will be displayed on

the TV screen.

Some discs may not have the label with the

region code even though they cannot be played in

all regions.

Video-CD (VCD)

(8 cm / 12 cm disc)

DVD-R (Digital Video Disk

- Recordable)

Audio-CD

(8 cm / 12 cm disc)

These discs can be written to only

once. Following ﬁnalisation a DVD-R

disc can no longer be written to or

edited.

In addition this unit can play DVD-R/DVD-RW

discs, DVD+R/DVD+RW discs, CD-R/CD-RW discs

containing audio titles, MP3* or JPEG ﬁles, SVCD

and Kodak picture CDs.

Notes on DVDs and Video CDs: Some DVDs

and Video CD playback functions can be pro-

grammed in a particular way by some software

manufacturers. As this unit plays DVDs and Video

CDs as they have been designed by the software

manufacturer, some playback functions may not be

available whilst other additional functions may be

available. Further information can be found in the

instructions supplied with the DVDs and Video CDs.

The unit may not be able to play some DVDs made

for speciﬁc business purposes.

DVD+RW (Digital Video Disk

+ReWritable)

* including MP3 discs with ID3-Tag

These discs can be written to several

times. Recordings can be deleted and

the disc can then be rewritten.

Notes:

• Depending on the recording unit or the CD-R/RW

(or DVD±R/±RW)disc itself, some CD-R/RW (or

DVD±R/±RW) discs cannot be played with this

unit.

• Do not attach any labels to either side (the

labeled side or the written side) of a disc.

• Do not use any irregularly shaped CDs (e.g.

heart-shaped or octagonal). If you use these

discs malfunctions may occur.

DVD+R (Digital Video Disk +

Recordable)

These discs can be written to only

once. Following ﬁnalisation a DVD-R

disc can no longer be written to or

edited.

Notes:

• This recorder cannot write to CD-R or CD-RW

discs.

• DVD-R/RW, DVD+R/RW and CD-R/RW discs

written to using a PC or a DVD or CD recorder

cannot be played if the disc is damaged or dirty

or if there is condensation on the recorder‘s lens.

• If you record a disc using a PC, even if it is in

a compatible format, the disc may not play

depending on the settings of the applica-

tion software used to create the disc. (Further

information can be obtained from the software

provider.)

- 8

32122 DVD Rec_Centros_GB.indb

26.04.2005 11:23:11

Download from Www.Somanuals.com. All Manuals Search And Download.

Essential Information

Video DVD-R/RW disc with VR recording mode

Disc-related Terms

Types of Video CDs

DVD-RW disc with VR recording mode

DVD+R disc

There are two types of Video CDs:

Title (DVD only)

+RW

DVD

VCD

DVD+RW disc

DVD-Video disc

Video CD

Video CDs equipped with PBC

(Version 2.0)

A title is the main ﬁlm content or the content of

the accompanying feature or the music album.

Each title has a title number enabling you to locate

it easily.

Audio CD

PBC (Playback Control) functions enable you to in-

teract with the system via menus, search functions

or other typical computer operations. In addition

high-resolution still pictures can be displayed if

they are available on the disc.

MP3

JPEG

MP3 CD

JPEG CD

Chapter (DVD only)

The ﬁnalized DVD disc is a DVD-Video disc.

Chapters are sections of a ﬁlm or a piece of music

that are smaller than a title. A title consists of one

or several chapters. Each chapter has a chap-

ter number to enable you to locate the desired

chapter. Depending on the disc, chapters may not

be labeled.

DVD-R and DVD-RW discs

Video CDs not equipped with PBC

(Version 1.1)

How are DVD-R and DVD-RW discs

different?

These discs are operated in the same way as Audio

CDs and allow playback of video pictures and

sound. They are not however equipped with PBC.

The essential difference between a DVD-R and a

DVD-RW disc is the fact that a DVD-R disc can only

be written to once, whilst a DVD-RW disc can be

written to several times. In addition, its content can

be deleted. You can write to and delete a DVD-RW

disc approx. 1000 times.

Track (Video CD or Audio CD only)

Symbols

Sections of a ﬁlm or a piece of music on a Video CD

or an Audio CD. Each track has a track number to

enable you to ﬁnd the desired track.

The symbol on the screen

During operation “ ” may appear on the screen.

This symbol means that the desired function is not

currently available on this disc.

Scene

Playback of writable discs on normal

DVD players

On a Video CD with PBC (Playback Control) func-

tions, moving pictures and still pictures are divided

into sections that are called “scenes“. Each scene

is displayed in the scene menu and has a scene

number to enable you to ﬁnd the scene quickly. A

scene consists of one or more tracks.

Disc symbols in the operating instructions

If part of the operating instructions contains one

of the symbols listed below, the section is only ap-

plicable to the disc shown on the symbol.

Many functions of this recorder are dependent

on the selected recording quality. One or more of

the symbols (DVD, Video, +RW, MP3) are dis-

played for each function described in the manual

so that you can immediately see whether the disc

supports this function.

DVD-R discs and DVD-RW discs written to in Video

mode can be played on some normal DVD players.

They must however be ﬁnalized ﬁrst. This process

ﬁxes the content of the disc so that it can be read

by other DVD players as a DVD-Video disc.

9 -

32122 DVD Rec_Centros_GB.indb

26.04.2005 11:23:11

Download from Www.Somanuals.com. All Manuals Search And Download.

Essential Information

What are “Recording Modes“?

Use of “Original“ and “Playlist“

DVD Recordings

This recorder offers two recording modes: VR mode

and Video mode. Recordings on DVD-R discs are

always in Video mode. Recordings on DVD-RW

discs can be in either VR or Video mode.

Throughout this manual you will often see the

words “Original“ and “Playlist“ used to describe

the actual content and the edited version.

• Original: Content refers to what is actually

recorded on the disc.

• Playlist: Content refers to the edited version of

the disc, i.e. how the original content should be

played.

Note: Fingerprints and scratches on the disc can

affect playback and/or recording. Take proper care

of your discs.

Disc Types and Recording Formats,

Modes and Settings

DVD-R and DVD-RW Discs

This recorder can play ﬁve different types of DVD

VR Mode Recording

disc:

DVD+R and DVD+RW Discs

• DVD-Video disc

• DVD-RW disc

• DVD-R- disc

• DVD+RW disc

• DVD+R- disc.

• 4 possible picture quality/recording time settings

(EQ, LQ, SQ, HQ), see page 24.

• Cannot be played on normal DVD players.

• Recordings can be comprehensively edited.

• Use of original lists and playlists (see page 48

and 49).

Recording on DVD+RW Discs

• 4 possible picture quality/recording time settings

(EQ, LQ, SQ, HQ), see page 24.

A DVD-R disc is always formatted in “Video For-

mat“ - the same as prerecorded DVD-Video discs,

i.e. after ﬁnalization you can play a DVD-R disc on

a normal DVD player.

“Video Recording Format“ (VR) is the default

format for a DVD-RW disc. If required, the disc can

be changed to Video format through subsequent

reformatting (“Disc -➜ Formatting“ in the main

menu) (Caution! The contents of the disc will be

erased).

• Can be played on many DVD players that sup-

port the +RW format (where appropriate, only

after ﬁnalization).

• Titles/chapters of recordings can be edited.

• Edited content can only be played after ﬁnaliza-

tion on some DVD players.

Video Mode Recording

• 4 possible picture quality/recording time settings

(EQ, LQ, SQ, HQ), see page 24.

• Can be played on normal DVD players (after

ﬁnalization)

• Limited editing functions.

Recording on DVD+R Discs

• 4 possible picture quality/recording time settings

(EQ, LQ, SQ, HQ), see page 24.

• Can be played on many DVD players that sup-

port the +R format (where appropriate, only

after ﬁnalization).

• Limited editing of titles/chapters.

• Edited content cannot be played on normal

DVD players. (Hide, combined chapters, added

chapter markers etc.).

Note: The “Video mode“ DVD-Video format is a

new format for recording on DVD-R/RW discs that

was approved by the DVD Forum in 2000. For this

reason you may experience problems playing writa-

ble DVD discs on some players. Symptoms include

video artifacts, audio and/or video dropout and

playback stopping suddenly. Our company cannot

take any responsibility for problems playing discs

recorded on this recorder on other players.

The recording quality is closely related to the

formatting.

- 10

32122 DVD Rec_Centros_GB.indb 10

26.04.2005 11:23:12

Download from Www.Somanuals.com. All Manuals Search And Download.

Essential Information

If the disc format is Video Recording format, the

recording mode for the disc is referred to as „VR

mode“. However, the recording mode of a Video

format disc is referred to as „Video mode“ (Excep-

tion: a prerecorded DVD-Video disc which is not

recordable has no recording mode).

The recording modes determine the recording

and editing options for the whole disc. Amongst

other things they determine the picture quality and

how much space the recording will take up on the

disc.

Notes on Recording

• If you use a DVD-R disc you can continue

recording until the disc is full or until you ﬁnalize

it. Before you start recording check how much

recording time is available on the disc.

• If you use a DVD-RW disc in Video mode, the

available recording time will increase if you

delete the last title recorded on the disc.

• The „Delete Title“ function in the „Title List-

Original“ menu only hides the title, it does not

however delete it from the disc and does not

therefore increase the recording time (except if

you delete the last recorded title on a DVD-RW

disc in Video mode).

• The displayed recording time is not exact as the

recorder uses variable bit-rate video compres-

sion. This means that the exact recording

time will depend on the material that is being

recorded.

• When recording a television broadcast the

recording time may be shorter if the reception is

poor or the picture contains interference.

• If you record only still pictures or audio, the

recording time may be shorter.

• The displayed recording time and remaining time

may not always add up to the total length of

the disc.

• The available recording time may be shorter fol-

lowing intensive editing of the disc.

• Overwrite recording is only possible on DVD+RW

discs.

• If you use a DVD-RW disc, make sure you select

the recording format (Video mode or VR mode)

before you start recording. See page 25 (Format-

ting) for more information.

Disc type

DVD-Video

DVD-RW

Formatting

Recording mode

Functions

Not possible

Not applicable

Playback only

Video Recording format (Default)

VR mode

Playback, recording,

original/playlist editing

Video format

Video mode

Playback, limited recording,

limited editing

DVD-R

Video format

Playback, limited recording,

limited editing

DVD+RW

DVD+R

+RW Video format

+R Video format

Playback, limited recording,

editing of titles/chapters

Playback, limited recording,

limited editing of titles/chapters

11 -

32122 DVD Rec_Centros_GB.indb 11

26.04.2005 11:23:12

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Recording TV-Audio Channels

Initial Remote Control

Setup

• The recording equipment should only be used for

lawful copying. You should ﬁnd out what con-

stitutes lawful copying in the country in which

you are making a copy. Copying of copyrighted

material e.g. ﬁlms or music is only lawful if

permitted by a legal exception or consented to

by the rights owner.

This recorder can also record NICAM audio. If the

NICAM setting (page 20) is set to “Auto“, NICAM

audio will be recorded in the case of a NICAM

transmission.

Restrictions on Video Recording

• You cannot record any copy-protected ﬁlm

material with this recorder. Copy-protected video

includes DVD-Video discs and some satellite

transmissions. If copy-protected material is en-

countered during recording, recording is paused

or stopped automatically and an error message

appears on the screen.

• Video that can only be copied once can only be

recorded using a DVD-RW disc in VR mode with

CPRM (see below).

• NTSC format signals from analog or DV inputs

cannot be recorded correctly with this recorder.

• SECAM format video signals (from an integrated

TV tuner or from analog inputs) are recorded in

PAL format.

• The product contains copyright protection

technology that offers protection through certain

US patents and other intellectual property rights

and is the property of the Macrovision Corpora-

tion and other companies. Use of this copyright

protection technology must be authorized by the

Macrovision Corporation. It is only intended for

private or other limited use unless otherwise au-

thorized by the Macrovision Corporation. Reverse

engineering and disassembly are prohibited.

To insert or change the batteries, press on the

imprinted arrow. Sldie off and remove the battery

compartment cover. Insert alkaline-manganese LR

03 (AAA) type batteries and make sure the + and

– poles are aligned correctly.

Then, replace the cover.

Resetting the DVD Recorder

CPRM

If any of the following problems occur...

• The unit is plugged in but will not turn on or off.

• The display panel does not work.

CPRM is a copy protection system (with scramble

system) that only allows the recording of “copy

once“ broadcasts. CPRM is the abbreviation for

“Content Protection for Recordable Media”.

This recorder is CPRM compatible. You can

therefore record copy-once broadcasts but cannot

make copies of these recordings. CPRM recordings

are only possible with VR mode formatted DVD-RW

discs and can only be played on players with CPRM

compatibility.

• The DVD recorder is not functioning normally.

.., the DVD recorder can be reset in the following

way:

• Hold the

button down for at least 5 seconds.

The unit will switch off. Press the

again to switch the unit back on.

button

• or unplug the power cable, wait at least 20

seconds and plug the cable back in.

- 12

32122 DVD Rec_Centros_GB.indb 12

26.04.2005 11:23:12

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Shipping the Unit

Connecting to the Aerial

The original shipping box and packaging materials

should be used to ship the unit. To give the unit

the best possible protection, repack it as it was

originally packed by the manufacturer.

Remove the existing aerial cable plug (for ter-

restrial or cable televisions) from the television and

plug it into the aerial socket on the back of the

DVD recorder (“AERIAL” socket). Plug one end of

the supplied aerial cable into the TV socket on the

DVD recorder (“RF. OUT”) and the other end into

the aerial socket on the television.

Do not use any strong solvents such as alcohol,

benzine, thinner, commercially available cleaners or

anti-static sprays intended for vinyl records.

Notes on Discs

Back of the television

?? ??

Handling Discs

?? ????

? ? ?????

Do not touch the prerecorded side of the disc. Hold

the disc at the edges so as not to touch the surface

with your ﬁngers. Do not stick paper or tape to

either side of the disc.

?? ??? ?

Connections - General

?? ???

?? ?? ??

?? ??? ?

Notes:

?? ???

Antenna

• Depending on your television set and the other

units you want to connect, there are several

ways of connecting your recorder to your TV

set. Only use the connection methods described

below.

? ?

? ? ???

• Refer as necessary to the manuals for your

television, DVD recorder, stereo system and

other units in order to make the best possible

connections.

Storing Discs

After playing, store the disc in its case. Do not ex-

pose the disc to direct sunlight or a source of heat

and never leave it in a parked car exposed to direct

sunlight as there may be a considerable increase in

temperature inside the car.

Back of the DVD recorder

Caution:

• The DVD recorder must be connected directly to

the television. Tune the television to the correct

video input channel.

• Do not connect the DVD recorder AUDIO OUT

socket to the audio system Phono In socket.

Cleaning Discs

Fingerprints and dust on the disc can affect the

picture and sound quality. Clean the disc before

playing it with a clean cloth. Wipe the disc from

the center outwards.

13 -

32122 DVD Rec_Centros_GB.indb 13

26.04.2005 11:23:13

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Notes: This recorder is equipped with a „Loop-

Through“ function. This function enables you to

record a television broadcast from this recorder‘s

integrated TV tuner whilst watching a satellite or

Set Top Box channel (see page 43).

Audio Connection (Left/Right)

Connecting to the

Television

Connect the left and right AUDIO OUT sockets on

the DVD recorder to the left and right IN sockets on

the television using the audio cable (A).

Make one of the following connections depending

on the functionality of your existing equipment.

Do not connect the recorder „via“ your video

recorder, satellite receiver or Set Top Box.

What is “Digital Out“?

Back of the television

SCART INPUT

S-VIDEO

VIDEO

AUDIO INPUT

COMPONENT VIDEO INPUT

INPUT

If your Loewe TV set has an AC3 module or a

DIS module you should connect to with the DVD

recorder using Digital Audio. Connect the DIGITAL

OUT socket on the DVD recorder to the DIGITAL

IN socket on the TV set. Then assign the AV socket

on the TV set to the DIGITAL IN socket using the

TV menu SETTINGS ➜ AV-SETTINGS ➜ AUDIO

DIGITAL.

INPUT

Antenna/ cable television

wall socket

Set-Top Box or

satellite receiver

AERIAL

SCART AV1

SCART AV2

INPUT

OUTPUT

Antenna/ cable

television

wall socket

Note: If you use the COMPONENT VUDEO OUT

connections, switch the VIDEO OUTPUT switch to

COMPONENT. If you use the SCART socket, switch

the VIDEO OUTPUT switch to RGB.

Back of the DVD recorder

Connecting to a Set Top Box

/ Satellite Receiver

Back of the DVD recorder

SCART Connection (e.g. Loewe TV)

Connect the EURO AV1 AUDIO/VIDEO Scart socket

on the DVD recorder to the corresponding input

socket on the television using Scart cable (T).

If you use a cable or satellite receiver with

?? ??

?? ????

integrated decoder, connect it to your recorder

and television set as described below. If you use a

separate decoder box for your cable/satellite televi-

sion, follow the instructions in the next section

“Connecting to an External Decoder Box“.

?? ????

Video Connection

?? ??? ?

?? ?? ??

?? ??? ?

Connect the VIDEO OUT socket on the DVD player

to the Video input socket on the television using

Video cable (V).

?? ???

1. Connect the aerial cable as shown. This enables

you to watch and record TV channels.

? ?

? ? ???

S-Video Connection

2. Connect the EURO AV1 AUDIO/VIDEO socket to

a EURO AV socket on your television using the

SCART cable. This enables you to watch discs.

Back of the television

Connect the S-VIDEO OUT socket on the DVD

player to the S-Video input socket on the television

using S-Video cable (S).

3. Connect the EURO AV2 DECODER socket to the

EURO AV socket on your Set Top Box / satellite

receiver using a SCART cable. This enables you

to watch the TV channels.

Component Video Connection

Connect the COMPONENT VIDEO OUT socket on the

DVD recorder to the corresponding input socket on

the television using a Y Pb Pr cable (C).

- 14

32122 DVD Rec_Centros_GB.indb 14

26.04.2005 11:23:13

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Decoder

Connecting to an ampliﬁer equipped

with two channel digital stereo (PCM)

or to an Audio/Video receiver equipped

with a multi-channel decoder (Dolby

Digital™, MPEG 2 or DTS).

Connecting to an External

Decoder Box

SCART AV

Antenna/ cable television

wall socket

If you use an external decoder box for your satellite

or cable TV system, follow the connection proce-

dure described below.

Set-Top Box or

satellite receiver

SCART AV1

AERIAL

SCART AV2

INPUT

OUTPUT

1. Connect one of the DIGITAL AUDIO OUT sockets

(OPTICAL O or COAXIAL X) on the DVD recorder

to the corresponding input socket on your

ampliﬁer. Use the appropriate digital audio cable

(Optical O or Coaxial X).

1. Connect your aerial socket in the wall to the

aerial input socket on your Set Top Box / satellite

receiver using an aerial cable.

2. Connect the decoder to the EURO AV DECODER

socket on the Set Top Box /satellite receiver

using a SCART cable. Further instructions can be

found in the manual for your decoder box.

2. You must conﬁgure the digital output of the

recorder (see “Audio“ on page 22).

Back of the DVD recorder

3. Connect the EURO AV2 socket on the DVD re-

corder to a EURO AV socket on your Set Top Box

/ satellite receiver using a SCART cable.

?? ??

?? ????

4. Connect the EURO AV1 socket on the DVD

recorder to a EURO AV socket on your television

using the SCART cable.

?? ????

?? ??? ?

?? ?? ??

?? ??? ?

?? ???

Caution:

• Do not connect the decoder box directly to your

recorder.

• Information from the decoder (e.g. about Pay

TV services) can only be viewed if the recorder is

switched off (standby mode).

? ?

? ? ???

Back of the television

COAXIAL

OPTICAL

DIGITAL INPUT

AUDIO INPUT

DIGITAL INPUT

Connecting to an Ampliﬁer

Amplifier (Receiver)

• For timer recordings to work properly on this

recorder, the satellite / Set Top Box must also be

switched on during recording.

• With this conﬁguration you cannot watch one

television broadcast and record another at the

same time.

Connecting to an ampliﬁer equipped

with analog 2 channel stereo or

Dolby Pro Logic II / Pro Logic

Digital Multi-Channel Sound

A digital multi-channel connection offers the best

sound quality. For this you need a multi-chan-

nel Audio/Video receiver that supports one or

more audio formats e.g. MPEG 2, Dolby Digital

and DTS. More information can be found in the

receiver manual and on the logos on the front of

the receiver.

Connect the left and right AUDIO OUT sockets on

the DVD recorder to the left and right AUDIO IN

sockets on the ampliﬁer, receiver or stereo system

using the audio cable (A).

Caution: Due to the DTS licensing agreement the

digital output will be to DTS Digital Out when a

DTS audio stream is selected.

Notes:

• If the audio format of the digital output does not

15 -

32122 DVD Rec_Centros_GB.indb 15

26.04.2005 11:23:14

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

correspond to the capabilities of your receiver,

the receiver will emit a strong distorted sound or

no sound at all.

• 5.1 digital surround sound via the digital con-

nection can only be obtained if your receiver is

equipped with a digital multi-channel decoder.

• You can obtain information about the audio

format of the current DVD via the “Disc Info“

menu (see page 28 and 33).

• This recorder does not perform internal (2-chan-

nel) decoding (downmix) of a DTS sound track.

To enjoy DTS multi-channel surround sound, you

must connect this recorder to a DTS compatible

receiver via one of the recorder‘s digital audio

outputs.

Connecting to a Digital

Camcorder

Basic Settings

DVD

STB

VCR

Set the rotating switch on the

remote contol to DVD mode.

You can connect a digital camcorder (DV) or a

digital DVD-R/RW recorder to the DV IN socket on

the front panel and digitally transfer the content of

DV tapes or DVD-/RW discs onto DVD-R/RW discs.

Use a DV cable (not supplied) to connect the DV

IN/OUT socket on your camcorder/video deck to the

DV IN socket on the front panel of this recorder.

Push the On/Off button on the

DVD recorder or ...

... the On/Off switch on the

remote control.

Note: Only DV units can be connected to this

socket (The source signal must be in the DV-25

format; see page 46 and 47). It is not compatible

with digital satellite tuners or S-VHS video decks.

The menu system offers several ways of changing

settings. Most menus consist of three levels for

setting up options. If you press

ﬁrst and second levels of the menu system are

displayed on the screen. You can display the third

level by pressing “ꢀ”. When navigating in the

menus, “ꢀ” on the right side of the menu tab

shows you that the next level can be called up.

, only the

Connecting to Audio/Video

(A/V) Accessories

Connect the DVD recorder‘s input sockets (AV3 =

AUDIO IN 3 / VIDEO IN 3 on the back of the unit

or AV4 = input 4 on the front of the unit (see page

4)) to the audio/video out sockets on the accessory

component using audio/video cables.

IN/OUT

Main Menu:

Auto Programming

Program Edit

Clock Set

TV Aspect

Display Mode

Note: If you use the S-VIDEO IN socket on the

front panel, the VIDEO IN socket on the front panel

cannot be used.

Automatic

Manual

Connector block for an accessory component

Date

Year

Time

- -

- - - -

- -

(VCR, Camcorder, etc.)

AV1 to Decoder

PBC

S-VIDEO

OUTPUT

AUDIO

OUTPUT

Factory Set

S-Video

VIDEO

OUTPUT

Video L-Audio-R

1st Level

2nd Level

3rd Level

S-Video

Video L-Audio-R

Back of the

DVD recorder

Front of the

DVD recorder

- 16

32122 DVD Rec_Centros_GB.indb 16

26.04.2005 11:23:14

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Navigating in Menus

Digital Link Plus

The General Menu

In this operating manual the RC3 remote control

arrow keys are represented as follows:

If you have connected the DVD recorder to a Loewe

TV set with Digital Link Plus or a comparable

system from another manufacturer (e.g. EasyLink,

Mega Logic, Project 50), the program list will be

transferred from the television set to the DVD re-

corder. This takes place when you register the DVD

recorder with the TV set, or when you make any

changes to the programs on the TV set (re-sorting,

deleting, adding). After a change of this sort, the

TV set will ask you to start transferring the changed

program list.

The DVD recorder detects a connected TV set with

Digital Link Plus or a similar system from another

manufacturer and adjusts the DVD recorder accord-

ingly. This means that you cannot search for, delete

or sort TV programs on the DVD recorder. The

menu items are grayed out; during the automatic

search it is only possible to transfer the program

information from the TV set.

Note that all programs that you receive via aerial or

cable must be stored in program numbers 1 to 88

on the TV set.

If the TV set does not ask you to transfer the

program information, then start the transfer on the

DVD recorder.

If your TV set is equipped with Digital Link Plus or

with a comparable system from another manufac-

turer, only carry out program changes on the TV

set.

If the TV set that you have connected to the DVD

recorder does not have Digital Link Plus or a

comparable system, then you should harmonize

the DVD recorder and TV set program lists. This will

help you to ﬁnd programs on the TV set and DVD

recorder.

Automatic Programming

This DVD recorder is ﬁtted with a tuner capable of

receiving up to 88 channels.

The arrows correspond to

“ꢁꢂꢃ ꢀ“ in the text.

The OK function is represented as

“OK“ in the text.

Note: The channel is set automatically when using

Digital Link Plus.

1. Press

The menu is displayed.

Preparation:

2. Select the desired option with ꢁ / ꢂ.

Connect the DVD recorder to the aerial system. See

“Connecting to the Aerial“ on page 13.

3. The desired entry is selected. Press ꢀ to call up

the corresponding second level.

1. Press

4. Select the second option with ꢁ / ꢂ.

The menu is displayed.

5. Press ꢁ / ꢂ to call up the corresponding third

level.

2. Select the “General“ option with ꢁ / ꢂ.

3. Press ꢀ to call up the second level.

6. Use ꢀ to select the desired settings and conﬁrm

your selection with OK.

Some options required additional steps.

4. Select the „Auto Programming“ option with ꢁ

/ ꢂ.

5. Press ꢀ to call up the third level. The country

option is highlighted.

7. Press

to quit the menu.

Activating Digital Link

6. Select a country with ꢁ / ꢂ and press ꢀ.

The “Start Search“ symbol is highlighted.

With Digital Link, Loewe TV sets pass on the

remote control signals to Centros via the Euro-

AV connection. Digital Link is useful if you want

to install Centros in a concealed place, e.g. in a

closed rack.

7. Press OK to start the program search.

The tuner cycles automatically through all avail-

able channels and transfers all programs found

to the tuner‘s memory.

• Switching on Digital Link.

Germany

Centros must be switched on. Press the

key on Centros for > 3 secs. “LINK“ appears

brieﬂy in the Centros display.

Auto Programming

Program Edit

Clock Set

TV Aspect

Display Mode

Stop

• Switching off Digital Link.

Searching 11%

Centros must be switched on. Press the

key on Centros for > 3 secs. “FRONT“ appears

brieﬂy in the Centros display.

AV1 to Decoder

PBC

Factory Set

17 -

32122 DVD Rec_Centros_GB.indb 17

26.04.2005 11:23:15

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Preparation

Channel Setting

7. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm.

Connect the DVD recorder to the TV set with Digital

Link Plus using a SCART connection. See “Connect-

ing to the Television“ on page 14.

Activate Digital Link on the DVD recorder as

described on page 17.

You can edit a channel manually (add, delete,

rename, move etc.).

Program edit

Station Rename

Move

Auto Programming

Program Edit

Clock Set

Edit

Delete

TV Aspect

Display Mode

Decoder on/off

NICAM auto/off

Transfer program list

AV1 to Decoder

PBC

1. Press

The menu is displayed.

Program edit: Search, channel entry, ﬁne

tuning.

Station Rename: Change name.

Move: Move a program in the progam list.

Delete: Deleting programs from the program

list

Factory Set

2. Select the “General“ option with ꢁ / ꢂ.

3. Press ꢀ to call up the second level.

4. Select the “Auto Programming“ option with ꢁ

/ ꢂ.

1. Press

. The menu is displayed.

Decoder on/off: Divert program via decoder

(“on“).

NICAM auto/off: Switch off NICAM reception

(“off“)

5. Press ꢀ to call up the third level. The country

option is highlighted.

2. Select the “General“ option with ꢁ / ꢂ.

3. The “GENERAL“ entry is selected. Press ꢀ to call

up the second level.

6. Select a country with ꢁ / ꢂ and press ꢀ.

The “Start DLP“ symbol is highlighted.

4. Use ꢁ / ꢂ to select the “Channel Setting“

option. Then press ꢀ to move to the third level.

The “Change“ symbol is highlighted.

8. Press

List“ menu.

, to quit the “Program

Germany

Auto Programming

Program Edit

Clock Set

Start Search

TV Aspect

Display Mode

Edit program

5. Press OK. The “Program List“ menu is displayed..

Start DLP

AV1 to Decoder

PBC

Factory Set

Alongside automatic programming it is also pos-

sible to set and save programs manually.

MFT

Station

ARD

ZDF

Ch.

C 12

C 23

C 7

C 27

C 17

C 33

C 34

C 47

C 10

RTL

1. Use ꢁ / ꢂ to select a program in the “Program

List“ menu, and press OK. The options are

displayed on the left side of the “Program List“

menu.

SAT1

PRO7

BBC

CNN

ABC

TV5

Decoder NICAM

PR-01

7. Press OK to start transferring the program list

stored in the TV to the DVD recorder.

This may take a few seconds. During the transfer

the DVD recorder display shows “DLP“.

2. Use ꢁ / ꢂ to select the “Program Edit“ option

and press OK. The “Program Edit“ menu is

displayed.

END

Select

Move

Page up/down

Note: (Centros 1172). With Digital Link Plus,

French stations are only broadcast in the correct

standard if you have previously selected “France“

as the country (see Point 6 above).

PR Seek

Ch. MFT PAL/SECAM

6. Use ꢁ / ꢂ to select a PR number, and press

OK. All available options that can be used on

the highlighted program are shown in the bot-

tom left ﬁeld.

C 7

SECAM

3. ꢃ / ꢀ (left/right): Moves the cursor to the

previous or next column.

ꢁ / ꢂ (up/down): Changes the settings of the

current cursor position.

- 18

32122 DVD Rec_Centros_GB.indb 18

26.04.2005 11:23:17

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Moving programmes

ABC

PR: Indicates the programm number (display

only)

Seek: Automatically searches for station. Use ꢃ

/ ꢀ to select the “Seek“ option and then press

ꢁ / ꢂ. Searching stops when the DVD recorder

receives a station.

Channel: Changes the channel number. Use

ꢃ / ꢀ to select the “Channel“ option and then

press ꢁ / ꢂ.

MFT: Changes the frequency to ﬁne-tuning. Use

ꢃ / ꢀ to select the “Fine“ option and then

press ꢁ / ꢂ.

PAL/SECAM (with Centros 1172): Changes the

receiver standard. If there is interference with

the image, use ꢃ / ꢀ to select the “PAL/SE-

CAM“ option and then use ꢁ / ꢂ to select

“SECAM“ for the SECAM-L standard.

You can sort the programme positions in the “Pro-

gramme list“ menu.

Upper case letter

1. Use ꢁ / ꢂ to select a programme in the

“Programme list“ and press OK. The options are

displayed on the left-hand side of the “Pro-

gramme list“ menu.

2. Use ꢁ / ꢂ to select the “Move“ option, and

press OK.

Cancel

Space Delete

3. Use ꢁ / ꢂ to select the position you require.

Then press OK or

gramme list to change.

3. Enter a name for the station. Use ꢁꢂꢃꢀ to

select a character and press OK.

• Upper case letter: Switches the keypad so

that only upper case is used.

Lower case letter: Switches the keypad so

that only lower case is used.

• Symbols: Switches the keypad to symbol

characters.

• ABC...123: Inserts the corresponding character

again in the pro-

Deleting a programme

You can delete a programme from the “Programme

list“ menu.

4. Then press OK to conﬁrm the settings and return

to the “Program list“ menu.

1. Use ꢁ / ꢂ to select a programme in the “Pro-

gramme list“ and press OK.

at the cursor position.

• OK: Select this option to end and save.

• Cancel: Select this option to close the menu.

Any changes made will be discarded.

• Space: Inserts a space at the cursor position.

• Delete: Deletes the character to the left of the

cursor position.

Note: If the DVD recorder has got the station from

a Loewe television via Digital Link Plus (DLP), the

“Edit programme“, “Move“ and “Delete“ func-

tions are blocked and can only be used once more

when the station is overwritten again by automatic

programming.

2. Use ꢁ / ꢂ to select the “Delete“ option, and

press OK. The programme is deleted.

Decoder on/off

1. Use ꢁ / ꢂ to select the programme that you

wish to reroute via the decoder and press OK.

The options are displayed on the left-hand side

of the “Programme list“ menu.

• ꢃ / ꢀ: Moves the cursor to the left or right.

Renaming stations

Note: Remote control buttons for keying in a

name (all selections must be conﬁrmed using the

remote control‘s OK button).

2. Use ꢁ / ꢂ to select the „Decoder on/off“

option, and press OK. When you select “on“,

“Decoder“ appears under the program shown in

the small picture.

You can give whatever name you like to a station.

Names should have a maximum of ﬁve characters.

: Inserts a space at the cursor position.

: Deletes the character to the right of the

cursor position.

: Deletes the character to the left of the

cursor position.

P+ / P-: Moves the cursor to the left or right.

TEXT, INFO: Toggles the keypad between upper

case, lower case and symbols.

1. Use ꢁ / ꢂ to select a programme in the

“Programme list“ and press OK. The options are

displayed on the left-hand side of the “Pro-

gramme list“ menu.

2. Use ꢁ / ꢂ to select the “Rename station“

option, and press OK. The “Keypad“ menu is

displayed.

4. Then press OK to conﬁrm the settings and return

to the “Program list“ menu.

19 -

32122 DVD Rec_Centros_GB.indb 19

26.04.2005 11:23:18

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

NICAM auto/off

6. Press ꢁ / ꢂ to select the “Automatic“ option

and then press OK.

TV Aspect

This DVD recorder can receive Hi-Fi sound transmis-

sions in NICAM Stereo. Bad reception can however

cause distortion. You can switch the function off

(“off“).

You can choose:

- 4:3: Select this setting if a television set with

4:3 picture format is connected.

- 16:9: Select this setting if a widescreen televi-

sion set with 16:9 picture format is connected.

7. Press

, to quit the menu.

Note: Check whether the automatic year and date

setting is correct. If necessary they must be set

manually.

1. Use ꢁ / ꢂ to select a program in the “Program

List“ menu, and press OK. The options are

displayed on the left side of the “Program List“

menu.

Auto Programming

Program Edit

Clock Set

Manual Setting of the Date / Time

2. Use ꢁ / ꢂ to select the “NICAM auto/off“

option from the program list and press OK. If

you select “auto“, “NICAM“ appears under the

program shown in the small picture.

4:3

TV Aspect

Display Mode

It is possible that the television station may broad-

cast incorrect date and / or time information or no

information at all and that the DVD recorder sets

the incorrect time. If this is the case we recommend

that you set the clock manually.

16:9

AV1 to Decoder

PBC

Factory Set

Setting the Clock

1. Follow steps 1 - 5 as described above (Automatic

Clock Setting).

If the automatic channel search is ﬁnished, the

date and time will also be set automatically (de-

pending on the broadcasting station), the same is

true when the power supply returns after a power

cut or after the mains cable has been unplugged.

The “Automatic“ option must be set to enable this.

2. Use ꢁ / ꢂ to select the “Manual“ option and

then press OK.

Auto Programming

Program Edit

Clock Set

TV Aspect

Display Mode

Automatic

Auto Programming

Manual

Program Edit

Clock Set

TV Aspect

Display Mode

Automatic

Date

Year

Time

- -

- - - -

- -

AV1 to Decoder

PBC

Manual

Date

Year

Time

- -

- - - -

- -

Factory Set

AV1 to Decoder

PBC

Factory Set

3. Then enter the necessary date and time informa-

tion.

ꢃ / ꢀ (left/right): Moves the cursor to the

previous or next column/line.

ꢁ / ꢂ (up/down): Changes the setting at the

current cursor position.

1. Press

The menu is displayed.

2. Select the “General“ option with ꢁ / ꢂ.

3. Press ꢀ to call up the second level.

4. Select the “Clock“ option with ꢁ / ꢂ.

5. Press ꢀ to call up the third level.

4. You can return to the 2nd level by pressing OK

or you can close the menu with

- 20

32122 DVD Rec_Centros_GB.indb 20

26.04.2005 11:23:19

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Screen Mode

Playback Control - PBC

Language Menu

The screen mode setting is only available if the

TV aspect of the television is set to 4:3. You can

choose:

VCD, SVCD

If a VCD (or SVCD) contains playback control (PBC)

features and if “PBC“ in the menu is set to “On“,

then the disc playback is controlled via the menu

contained on the disc. Otherwise the VCD is played

in the same way as an audio CD.

Menu Language

Select a language for the menus and dialogs

displayed by the DVD recorder.

- Letter Box:

Widescreen format recordings

appear with black borders at the

top and bottom of the screen.

The picture ﬁlls the whole screen

but cuts off areas at either side

that do not ﬁt on the screen if

required.

Display Menu

English

- Pan Scan:

Deutsch

Disc Menu

Disc Audio

Disc Subtitle

Auto Programming

Français

Italiano

Español

Nederlands

Program Edit

Clock Set

TV Aspect

Auto Programming

Display Mode

Português

Swenska

Program Edit

Clock Set

TV Aspect

AV1 to Decoder

OFF

PBC

Factory Set

Letter Box

Display Mode

Pan Scan

AV1 to Decoder

PBC

Disc Languages

Factory Settings

Factory Set

Select a language for the disc‘s menu, audio and

subtitles.

If required you can restore all the factory settings

on the recorder. Select the “Execute“ symbol and

press OK.

Original

Display Menu

AV1 on Decoder

English

German

French

Disc Menu

Disc Audio

Disc Subtitle

We have already described how to connect a

decoder on page 15. If you also want to use an

analog decoder for you TV set (programs to be

decoded are sent via the DVD recorder to the

decoder) you must set “AV1 on Decoder“ to “On“.

If it is set to “Off“ the decoder is only available to

the DVD recorder.

Note: Some options cannot be reset (security

rating, password and country code, program list,

timer list).

Italian

Spanish

Dutch

Portuguese

Swedish

Others - - - -

Auto Programming

Program Edit

Clock Set

TV Aspect

Auto Programming

Program Edit

Clock Set

TV Aspect

These are presettings and, if available, are set after

inserting the disc. Otherwise the “Original“ version

of the disc is used.

Display Mode

AV1 to Decoder

PBC

Display Mode

Set

- Original:

The original language of the disc

is selected.

Factory Set

AV1 to Decoder

PBC

OFF

- Others:

To select another language, select

“Other“ and press OK. Use the

number keys and the OK button

to enter the appropriate four-digit

number in agreement with the

language code on page 68. If you

input the code incorrectly, press

Factory Set

21 -

32122 DVD Rec_Centros_GB.indb 21

26.04.2005 11:23:21

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

ꢃ repeatedly to delete the entry

character by character and then

correct it before you press OK.

DTS

Sampling Frequency

Off: If you select “Off“ the DTS signal is not emit-

ted from the DIGITAL OUT socket.

If your receiver or ampliﬁer is NOT designed for 96

kHz signals, select 48 kHz. If you have made this

selection, the unit automatically converts the 96

kHz signals to 48 kHz signals that the system can

decode. If your receiver or ampliﬁer is designed for

96 kHz signals, select 96 kHz.

Bitstream: Select “Bitstream“ if you have a Dolby

Digital decoder (or ampliﬁer, a Loewe TV with AC3

or DIS module or another unit with Dolby Digital

decoder) connected to the DIGITAL OUT socket of

the DVD recorder.

Audio Menu

Each DVD disc offers a variety of audio

formats. Set the audio format for the

recorder according to the type of audio system you

are using.

Dolby Digital

DTS

Dolby Digital

MPEG

DTS

Off

Sampling Freq.

DRC

48KHz

96KHz

Dolby Digital

MPEG

Sampling Freq.

DRC

Bitstream

PCM: Select this option if the unit is connected

to a digital two channel stereo ampliﬁer. The DVD

recorder‘s digital audio outputs emit sound in PCM

2 channel format if you play a DVD-Video disc with

Dolby Digital audio format.

Vocal

Bitstream: Select “Bitstream“ if you have a Dolby

Digital decoder (or ampliﬁer, a Loewe TV with AC3

or DIS module or another unit with Dolby Digital

decoder) connected to the DIGITAL OUT socket of

the DVD recorder.

Night Mode

MPEG

Thanks to digital audio technology the DVD format

enables you to hear soundtracks in the most

accurate and realistic way possible. However, you

may wish to limit the dynamics (i.e. the difference

between the loudest and the quietest sounds). In

this way you can play a ﬁlm with minimum volume

differences. For this purpose switch “Night Mode“

to “On“.

PCM: Select this option if the unit is connected

to a digital two channel stereo ampliﬁer. The DVD

recorder‘s digital audio outputs emit sound in PCM

2 channel format if you play a DVD-Video disc with

Dolby Digital audio format.

Bitstream: Select “Bitstream“ if you have a Dolby

Digital decoder (or ampliﬁer, a Loewe TV with AC3

or DIS module or another unit with Dolby Digital

decoder) connected to the DIGITAL OUT socket of

the DVD recorder.

Dolby Digital

PCM

DTS

Bitstream

MPEG

Sampling Freq.

DRC

Vocal

Dolby Digital

DTS

MPEG

Sampling Freq.

DRC

OFF

Vocal

- 22

32122 DVD Rec_Centros_GB.indb 22

26.04.2005 11:23:22

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

6. If you have not yet entered a password:

Enter a 4-digit code with the number keys to

create a personal password and press OK. Enter

the 4-digit password again for security and press

OK to conﬁrm.

If you have already entered a password:

Enter the password and press OK.

Karaoke Audio

Have you Forgotten the Current

Password?

Switch the singing option (karaoke audio) on, if

you want to play a multi-channel karaoke DVD.

The karaoke channels on the disc are mixed into

normal stereo sound.

If you have forgotten your password, proceed as

you would to delete the current password.

1. Press

to display the menu.

Dolby Digital

2. Use the number keys to enter the 6-digit code

“210449“.

DTS

Note: If you make a mistake, press ꢃ repeatedly

to delete or correct the password digits one after

the other before pressing OK.

MPEG

Sampling Freq.

DRC

3. Select “Yes“ and press OK. The 4-digit password is

deleted. Enter a new code as shown left.

Vocal

OFF

Rating

7. If the “Change“ option is selected, press OK.

Films on DVD can contain scenes that are not

suitable for children. For this reason discs can

contain child protection information that applies

to the whole disc or only to certain scenes on the

disc. The ratings are country-dependent. The child

lock function enables you to prevent your children

watching certain discs or scenes.

8. Enter a new 4-digit password using the number

keys and press OK.

9. Then enter the password again for security and

conﬁrm by pressing OK.

Lock Menu

Note: If you input the code incorrectly, press ꢃ

repeatedly to delete or correct the password digits

one after the other before pressing OK.

Password

Set Password

Changing the 4-digit code

Rating

No Limit

Delete Password

Country Code

8 (Adult)

Set Password

Change

New Password

If you want to switch the password protection off,

proceed as follows.

Delete

Rating

Country Code

1. Press

. The main menu is displayed.

2. Select the lock option with ꢁ / ꢂ.

1 (Kids)

3. The lock entry is selected. Press ꢀ to call up the

second level.

1. Follow steps 1 - 3 as described in “Password“.

2. Select the “Rating“ option with ꢁ / ꢂ.

3. Press ꢀ to call up the third level.

4. Select the “Password“ option with ꢁ / ꢂ.

5. Press ꢀ to call up the third level.

1. Press

. The menu is displayed.

2. Select the lock option with ꢁ / ꢂ.

6. Select the “Delete“ option and press OK.

4. Follow step 6 as described left (see „Password“).

3. The lock entry is selected. Press ꢀ to call up the

second level.

7. Enter the current 4-digit password using the

number keys and press OK.

5. Select a protection level between 1 and 8 using

the ꢁ / ꢂ keys. 1 has the least playback limita-

tions. 8 has the most playback limitations.

4. Select the “Password“ option with ꢁ / ꢂ.

5. Press ꢀ to call up the third level.

No Limits: If you select “No Limits“ the child

23 -

32122 DVD Rec_Centros_GB.indb 23

26.04.2005 11:23:24

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

lock is not active. The disc will play in full.

Steps 1 to 8: Some discs contain scenes that

are not suitable for children. If you assign a

security rating to your DVD recorder it will only

play the scenes on the inserted disc that cor-

respond to or are below the assigned security

rating. Scenes of a higher level on the DVD will

only be played if appropriate replacement scenes

are available on the disc. The alternative scenes

must have the same or a lower security rating. If

no suitable alternative is found, play is stopped.

You must enter the 4-digit password or change

the rating level to continue to play the disc.

Country Code (for Rating)

Recording Menu

Enter the code for a country/region whose stand-

ards are to be used to rate the DVD-Video disc.

(See “Country Code List“ on page 69.)

For Great Britain select „G B“.

Recording Quality

You can set the picture quality for recording:

• EQ (Super Long Play),

• LQ (Long Play),

• SQ (Standard Quality),

• HQ (High Quality).

Set Password

Rating

Country Code

See also page 61 for further details.

Rec Mode Set

Rec Aspect

DV Rec Audio

TV Rec Audio

Auto Chapter

6. Press OK to conﬁrm the selected security rating.

Press

to quit the menu.

1. Press

The MENU menu is displayed.

2. Select the “Lock“ option with ꢁ / ꢂ.

3. The “Lock“ entry is selected. Press ꢀ to call up

the second level.

1. Press

The menu is displayed.

4. Select the “Country Code“ option with ꢁ / ꢂ.

2. Select the “Recording“ option with ꢁ / ꢂ.

5. Press ꢀ to call up the third level.

3. The “Recording“ entry is selected. Press

call up the second level.

ꢀ

6. If you have not yet entered a password:

Follow step 6 as described on page 23 under

“Password“.

4. Select the “Rec Mode Set“ option with ꢁ / ꢂ.

5. Press ꢀ to move to the third level.

7. Select the ﬁrst character with the ꢁ / ꢂ keys.

6. Use ꢁ / ꢂ to select the desired recording qual-

ity (HQ, SQ, LQ or EQ).

8. Move the cursor using the ꢀ key and select the

second character with the ꢁ / ꢂ keys.

7. Press OK to conﬁrm the selection and then

9. Press OK to conﬁrm the selected country code.

to quit the menu.

Press

to quit the menu.

- 24

32122 DVD Rec_Centros_GB.indb 24

26.04.2005 11:23:25

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Recording Format

TV Audio

Disc Menu

When recording you can set the picture format

(16:9 or 4:3) to suit the picture material you are

recording.

When recording bilingual TV you can select the

audio channel to be recorded.

Audio 1+2: both languages are recorded

Audio 1: language 1 only

Formatting

If you insert a completely empty disc it is automati-

cally formatted by the recorder (see table on page

11).

DVD-R: The recorder formats the disc in Video

mode.

DVD-RW: The recorder formats the disc in VR

mode.

Audio 2: language 2 only

Rec Mode Set

Rec Aspect

4:3

Rec Aspect

DV Rec Audio

TV Rec Audio

Auto Chapter

DV Rec Audio

TV Rec Audio

Auto Chapter

16:9

Sound 1+2

Sound 1

DVD+R: The recorder formats the disc in Video

mode.

Sound 2

DVD+RW: The recorder formats the disc in Video

mode.

A RW disc can also be formatted at a later date via

the menu.

Start

Disc Format

DV Audio

Automatic Chapter

Finalise

Disc Label

Disc Protect

You need to use this setting if your camcorder with

32 KHz / 12-bit is connected to the DV IN socket on

the front panel.

Some digital camcorders have two stereo tracks for

audio. One is used for recording, the other is used

for post-editing.

During recording chapter markers are placed at

ﬁxed intervals. You can select intervals of 5, 10 or

15 minutes. If you select “None“ automatic chapter

setting is switched off.

Rec Mode Set

Rec Aspect

DV Rec Audio

TV Rec Audio

On the Audio 1 setting the original sound is

recorded.

On Audio 2 setting the edited sound is used.

Auto Chapter

None

1. Press

The menu is displayed.

All 5 Min.

All 10 Min.

Rec Mode Set

2. Select the “Disc“ option with ꢁ / ꢂ.

Rec Aspect

All 15 Min.

DV Rec Audio

TV Rec Audio

Auto Chapter

Audio 1

3. The “Disc“ entry is selected. Press ꢀ to call up

the second level.

Audio 2

4. Select the “Formatting“ option with ꢁ / ꢂ.

5. Press ꢀ to call up the third level. The “Start“

symbol is highlighted.

6. Press OK. The „Formatting“ menu is displayed.

7. For DVD-RW select the desired type of format-

ting (VR mode or Video mode) with ꢃ / ꢀ and

then press OK.

25 -

32122 DVD Rec_Centros_GB.indb 25

26.04.2005 11:23:26

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Disc Name

Disc Format

Use this option to enter a name for the disc. The

name is displayed when the disc is loaded and

when you display disc information on the screen.

• The disc name can be up to 32 characters long.

• For discs formatted on other DVD recorders you

will only see a limited character set.

Finalise

Disc Label

Disc Protect

Finalise

Disc Format

Unfinalise

Select a Mode.

VR Mode

Video Mode

Disc Format

Finalise

Disc Label

Disc Protect

8. Use ꢃ / ꢀ to select “Ok“, and press OK.

Edit

9. The following prompt appears:

1. Follow steps 1 - 3 described on page 25 (For-

matting).

Disc Format

2. Select the „Finalization“ option with ꢁ / ꢂ.

All Data on the disc will be deleted.

3. Press ꢀ to call up the third level.

“Finalization“ is highlighted.

Cancel

4. Press OK. The “Finalization“ menu is displayed.

1. Follow steps 1 - 3 described on page 25 (For-

matting).

Finalise

Caution: When you start formatting all record-

Do you want to finalise?

ings on the disc are deleted.

2. Select the „Disc Name“ option with ꢁ / ꢂ.

3. Press ꢀ to call up the third level.

The “Edit“ symbol is highlighted.

10. After pressing OK disc formatting begins. It

can take a few minutes.

Cancel

4. Press OK. The “Keyboard“ menu is displayed.

Finalization

5. Press OK. The recorder starts ﬁnalization of the

disc.

DVD-RW

Finalization ﬁxes recordings so that the disc can

be played on a regular DVD player or a computer

with a suitable DVD-ROM drive. During ﬁnalization

of a Video mode disc a menu is created for disc

navigation. You can access the menu by pressing

Upper case letter

Note: The time needed for ﬁnalization depends on

the type of disc, how much is recorded on the disc

and the number of titles on the disc. Finalization of

a prerecorded disc can take up to 8 minutes.

the

button.

Caution: Following recording and ﬁnalization

of DVD-R and DVD+R discs no other editing or

recording can take place. This does not however

apply for a DVD+RW and DVD-RW disc.

Tip: If you insert a ﬁnalized DVD-RW or DVD+RW

disc, the ﬁnalization can be reversed by selecting

“Unﬁnalize“ in the “Finalization“ menu. Then the

disc can be edited and re-recorded.

Cancel

Space Delete

5. Enter a name for the disc. Use ꢁꢂꢃ ꢀ to

select a character. Then press OK to use the

character in the name.

See step 3 on page 19 (Renaming a Station).

6. Select OK and then press OK to save the name

and to return to the „Disc“ menu.

7. Press

to quit the menu.

- 26

32122 DVD Rec_Centros_GB.indb 26

26.04.2005 11:23:27

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Disc Protection

Displaying Information when the

DVD Recorder is Supplying the TV

Broadcast.

Displaying Disc Information on the

Screen during Disc Playback

When recording onto a DVD+RW/+R disc in

DVD+RW disc mode protection should be switched

to “On“ to avoid inadvertant recording, changing

or deleting of the disc. To release the disc again,

select “Off“.

You can display a variety of information about the

inserted disc on the screen.

If you are watching a TV program that is being sup-

plied by the integrated receiver in the DVD recorder

(DVD recorder is in stop mode), then you can show

(and hide) information about the TV program and

1. Press

twice to show disc information whose

parameters can be changed.

2. To hide the screen display again, press

A detailed explanation of how to play a disc can

be found on the following pages.

Disc Format

the disc in the player by pressing OK or

Finalise

Disc Label

Disc Protect

Example: A DVD-RW disc in VR mode is inserted

and the program 06 called “ABC“ is currently

running:

OFF

Temporarily Visible Symbols

Indicates the channel number, station name and

the audio signal (NICAM, STEREO, MONO) for the

current broadcast.

Resume play from this point

Action prohibited or not available

Notes:

Indicates in a progress bar the ratio of

used to free space on the inserted disc,

the free space in minutes and the record-

ing quality (for other discs see next page)

1. Not all discs have all the functions described on

the following pages.

Additional Screen Menus

2. If no button is pressed for ten seconds the

screen menu disappears.

This manual contains basic instructions for operat-

ing the DVD recorder. Some DVDs require speciﬁc

handling or only permit limited operation during

playback. If this is the case the symbol appears

on the screen. This indicates that certain opera-

tions are not permitted at certain points or that no

menu is available on the disc.

Indicates the name and

format of the disc.

DVD-RW

VR Mode

PR-06

STEREO

SQ 1H 32M Free

ABC

28/8/2005 11:35

Indicates the current date and time.

27 -

32122 DVD Rec_Centros_GB.indb 27

26.04.2005 11:23:28

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Display of disc Information during playback with

on the Screen

DVD-Video

Indicates the elapsed time and the total time.

Indicates the ratio between elapsed playing time and

remaining playing time.

Indicates the current

title/chapter number and

the total number of titles/

chapters.

TIiTteLlE: 1:/12/217

Indicates the current drive

mode.

KCaHpAiPteTlE: R2/2: 03/28

0:06:32

2:12:10

Menu Options

Function (Use ꢁ/ ꢂto select the desired option)

Selection Methods

Title

Indicates the current title number and the total number of titles and

skips to the desired title number.

ꢃ

ꢀ

1/6

numbers, OK

Chapter

Indicates the current chapter number and the total number of chap-

ters for the current title and skips to the desired chapter number.

4/26

ꢃ

ꢀ

numbers, OK

ꢃ

ꢀ

Indicates the elapsed playback time and

forwards the film to the desired point.

0:10:30

Time

Indicates the current ﬁlm language and the current audio format and

ꢃ

ꢀ

ENG

Audio

changes these settings.

D 5.1CH

Indicates the current subtitle language and

changes the settings.

OFF

ABC

Subtitles

Indicates the current selected camera position / total number of

cameras and changes the camera position.

ꢃ

ꢀ

Camera

Sound

1/3

Indicates the current audio mode and changes the settings.

NORMAL

Indicates the ratio between elapsed playing time and

remaining playing time.

Indicates the elapsed time and the total time.

VCD, SCVCD

Indicates the current track

number and the total number

of tracks or the PBC mode.

Indicates the current drive

mode.

Track : 1/17

0:06:32

1:00:00

Menu Options

Function (Use ꢁ/ ꢂto select the desired option)

Selection Methods

Track

Indicates the current track number / total number of tracks and skips to

the desired track number or indicates that the PBC mode is active, if it is

set to “On“ in the main menu.

ꢃ

ꢀ

1/4

numbers, OK

Time

Indicates the elapsed playback time and forwards the film to the

desired point.

–

0:10:30

Audio

Sound

ꢃ

ꢀ

STEREO

Indicates the audio format and changes the settings.

Indicates the current ﬁlm language and the current audio format

and changes these settings.

NORMAL

- 28

32122 DVD Rec_Centros_GB.indb 28

26.04.2005 11:23:29

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Installation

Displayi of disc Information during playback with

on the Screen (Continued)

Indicates the ratio between elapsed playing time

and remaining playing time.

DVD-VR

Indicates the elapsed time and the total time.

Indicates the title name, recording date,

recording quality etc.

Titel: 1/22

Kapitel: 2/20

Indicates the current

0:06:32

2:12:10

ORG SQ

ORG: Original , PList: Playlist

drive mode.

Menu Options

Selection Methods

Function (Use ꢁ/ ꢂto select the desired option)

Title

ꢃ

ꢀ

Indicates the current title number and the total number of titles and

skips to the desired title number.

Indicates the current chapter number and the total number of chap-

ters for the current title and skips to the desired chapter number.

1/6

numbers, OK

Chapter

ꢃ

ꢀ

4/26

numbers, OK

Indicates the elapsed playback time and forwards the film to the

desired point.

Time

0:10:30

ꢃ

ꢀ

numbers, OK

STEREO

Indicates the current ﬁlm language and the current audio format and

2CH

Audio

ꢃ

ꢀ

changes these settings.

Indicates the current subtitle language and

changes the settings.

OFF

ABC

Subtitles

Sound

Indicates the current audio mode and changes the settings.

NORMAL

ꢃ

ꢀ

29 -

32122 DVD Rec_Centros_GB.indb 29

26.04.2005 11:23:30

Download from Www.Somanuals.com. All Manuals Search And Download.

Using DVDs and Video CDs

Notes:

Playing back a DVD or

video CD (VCD, SVCD)

General functions

1. If the child lock is active and the DVD disc‘s se-

curity rating is higher than that of the child lock,

the four-digit password will need to be entered

(see “Ratings“ on page 23).

Note: Unless otherwise indicated, the remote

control is able to control the functions described.

The DVD recorder‘s own controls can also be used

to control certain functions.

Preparing for playback

2. DVD‘s have a country code. The recorder will not

play a disc that has a country code which differs

from the country code stored in the unit. This

player has country code 2.

Switch the television on and set the video source to

be the input that the DVD recorder has been con-

nected to or activate the “Control voltage“ option

for the television‘s AV input.

Selecting a different TITLE

3. You can also switch Play back control - PBC (see

page 21) off from the main menu (OFF).

If you have connected the DVD recorder to an

audio system, switch on the audio system and, as

the source, set the input that the DVD recorder has

been connected to.

1/6

DVD Video VR

If there is more than one title on a disc,

you can switch to a different title as follows:

1. Press on the unit to open the disc drawer.

2. Insert the disc that you have selected, with the

side that is to be played back face-down, in the

drawer.

Press

twice and use ꢁ / ꢂ to select the

title‘s symbol. Then press the appropriate number

button (0-9) or ꢃ / ꢀ to select a title number.

After pressing OK,the title will play.

3. Press on the unit to close the disc drawer.

4. READING shows on the display while disc recog-

nition is in progress.

Selecting a different CHAPTER or

TRACK

Play

4/26

1/4

When the disc has been recognised, playback

begins automatically (if it does not, start it manu-

DVD Video VR VCD

ally

) and the menu on the disc will display

(or the ﬁlm will start immediately if there is no such

menu). When the disc menu appears, proceed as

follows:

If a disc title has more than one chapter/track, you

can select a different chapter or track as follows:

During playback, press P+ or P- to go to the next

chapter or next track, or to go back to the start of

the current chapter or track.

DVD: Use the ꢃ ꢀ ꢁ ꢂ buttons to select the

title or chapter that you wish to see. Then press

OK to start playback.

Press P- twice to go back to the previous chap-

ter/track.

During playback, you can select a chapter or track

VCD: Use the number buttons to select the track

directly by pressing

twice. Then use ꢁ / ꢂ

you want.

to select the chapter symbol (or the track symbol

on a video CD). Then use the number buttons (0-9)

to input the chapter/track number or use ꢃ / ꢀ to

select it. When OK is pressed, the chapter will play.

The disc‘s menu options and its precise mode of

operation may differ from disc to disc. Follow the

instructions on each menu page.

Further information can be found from page 21.

- 30

32122 DVD Rec_Centros_GB.indb 30

26.04.2005 11:23:31

Download from Www.Somanuals.com. All Manuals Search And Download.

Using DVDs and Video CDs

order to use the Repeat function. Further informa-

tion can be found from page 21.

Searching

Slow motion

DVD Video VR VCD

1. Press

during playback. The

1. During playback, press

The recorder now switches to PAUSE mode.

Time (Play from ...)

recorder now switches to Search mode.

0:10:30

2. Press

repeatedly to select the

2. In PAUSE mode, press or . The

speed you want:

DVD recorder switches to Slow Motion mode.

3. Use the or button to select the

speed you require by repeatedly pressing:

1/16, 1/8, 1/4, 1/2 (backwards) or

1/16, 1/8, 1/4, 1/2 (forwards).

With a video CD, the slow motion speed changes

as follows:

DVD Video VR

The “Time“ function enables you to select the time

that the disc begins to play.

toggles between x2, x4, x8, x16, x100

(backwards) or

x2, x4, x8, x16, x100 (forwards).

With a video CD, the search speed changes as

follows: x2, x4, x8 .

1. During playback, press

will appear on the television.

The elapsed playing time of the current disc

shows in the “Time“ ﬁeld.

twice. The Info bar

3. You can leave Search mode by pressing

1/8, 1/4 or 1/2 (forwards).

Freeze-frame and Picture For Picture

playback

2. Use ꢁ / ꢂ to select the “Time“ symbol.

“0:00:00“ displays in the “Time“ ﬁeld.

4. You can leave Slow Motion mode by pressing

DVD Video VR VCD

During playback, press

The recorder now switches to PAUSE mode.

3. Use the number buttons to input the required

start time within 20 seconds. From left to right,

input the hour, the minutes and the seconds of

the disc‘s start time.

You cannot input an invalid start time. If you

have input incorrect ﬁgures, press ꢃ / ꢀ to

move the cursor (_) to the incorrect ﬁgure. Input

the correct numbers.

Note: Video CDs do not support slow motion

backwards playback.

1. You can page backwards and forwards between

images by pressing ꢃ / ꢀ repeatedly or page

continuously by holding ꢃ / ꢀ down.

Repeating

Chapter

2. You can leave PAUSE mode by pressing

4. Press OK within 20 seconds to conﬁrm the start

time. Playback will start at the time selected.

DVD Video VR VCD

DVD discs - Repeating chapter/title/OFF

Notes: Paging back through images is not

supported by video CDs. You can page forward

Press

to select the repeat mode that you

through images by pressing

control.

on the remote

want:

• Chapter: repeats the current chapter.

• Title: repeats the current title.

• All: repeats all the titles on the disc.

(VR mode - only DVD-RW discs)

• OFF: no playback repeated.

Video CDs - repeat track/all/OFF

Press

to select the repeat mode that you

want.

• Track: repeats the current track.

• All: repeats all the tracks on the disc.

• OFF: no playback repeated.

Note: On a video CD with PBC, you must set PBC

to OFF in the „Disc“ menu of the main menu in

31 -

32122 DVD Rec_Centros_GB.indb 31

26.04.2005 11:23:32

Download from Www.Somanuals.com. All Manuals Search And Download.

Using DVDs and Video CDs

4. Press

menu.

to turn off the “Marker search“

Zoom

Disc menus

DVD Video VR VCD

You can use the Zoom function to expand the video

image and navigate in the enlarged image.

Most DVDs have their own menus. There is a dif-

ference between the disc menu and the so-called

title menu.

Marker Search

1. During playback or freeze-frame playback, press

Title menu

RADIO

to activate the Zoom function.

RADIO

Each time that you press the

button,

DVD

the screen will change as follows:

Size x1, size x2, size x4, size x1 (normal size).

1. Press TITLE

menu, it will appear on the screen. Otherwise

the disc menu may be shown.

. If the current DVD has a title

2. Use the ꢃ ꢀ ꢁ ꢂ buttons to move around

within the zoomed image.

MENÜ

END

Select

View

Delete

2. The menu may cover camera angles, languages

spoken, sub-title options and chapters for the

title.

3. To continue with normal playback, press

RADIO

repeatedly until the image is back to

How to delete a marker

the normal size.

Disc menu

1. Press

mode.

during playback or while in Stop

Note: With some DVDs, the Zoom function may

not work.

DVD

The “Marker search” menu will appear on the

screen.

1. Press

The disc menu is displayed.

2. Use the ꢃ ꢀ ꢁ ꢂ to select the marker that

you wish to delete.

Markers

2. Make the settings you require by using ꢃ ꢀ ꢁ

ꢂ and OK.

1/6

3. Press

The message “The selected marker has been

deleted“ will appear.

3. Press

again to close the disc menu (or it

DVD Video VR VCD

may automatically close when OK is pressed).

4. Use ꢃ / ꢀ to select the “Yes“ option, and press

OK.

How to set a marker

You can start playback from a marker that has been

saved. Up to six markers can be saved.

How to set a marker:

5. Repeat steps 2 -4 to delete other markers.

6. Press

menu.

to turn off the “Marker search“

1. During playback, press

when you are

at the point at which you want to save a marker.

The marker symbol will appear on the screen for

a short time.

2. Repeat step 1 to set up to six markers on a disc.

How to recall a scene that has been marked

1. Press

during playback. The “Marker

search” menu will appear on the screen.

2. Use the ꢃ ꢀ ꢁ ꢂ buttons to select a marked

scene that you wish to recall.

3. Press OK.

Playback will start from the marked scene.

- 32

32122 DVD Rec_Centros_GB.indb 32

26.04.2005 11:23:33

Download from Www.Somanuals.com. All Manuals Search And Download.

Using DVDs and Video CDs

Camera positions

Changing the audio channel

STEREO

1/3

DVD

VCD Video VR

If have inserted a video CD, press

playback and use ꢁ / ꢂ to select the „Audio“

menu item. Then press ꢃ / ꢀ to listen to a differ-

ent audio channel (STEREO, LEFT or RIGHT).

If the DVD contains scenes that have been

captured using different camera positions, you

can switch to a different camera position during

playback.

2x during

3D surround sound

• Press

during playback and then press

ꢃ / ꢀ repeatedly to select the camera angle

you require.

NORMAL

The number of the current camera position is

shown on the screen.

DVD Video VR VCD

This unit can produce a 3D surround sound effect

that uses two ordinary stereo speakers to simulate

multi-channel audio playback with the ﬁve speak-

ers or more that are normally required for multi-

channel audio in a home cinema system.

Note: A camera symbol will appear on the screen

during scenes that were recorded using different

camera positions.

1. Press

2x and use ꢁ / ꢂ to select the

Digital sound formats and ﬁlm

language

“Sound“ menu item. Then press ꢃ / ꢀ during

playback to select “3D SUR“.

ENG

2. Select “NORMAL“ to switch off the 3D surround

sound effect.

D 5.1CH

DVD

Subtitles

Here you can select the digital sound format in

connection with the ﬁlm language. To do this,

OFF

ABC

press

2x during playback and use ꢁ / ꢂ to

select the „Audio“ menu item. Then press

ꢃ / ꢀ to get a different ﬁlm language or sound

format.

DVD Video VR

During playback, press

select the “Subtitles“ menu item. Then press ꢃ /

2x and use ꢁ / ꢂ to

ꢀ to select the subtitle language on the DVD.

Note: Some discs have got Dolby Digital and

DTS sound tracks. If DTS is selected, there is no

analogue audio output. To listen to the DTS sound

track, connect the recorder via one of the digital

outputs to a DTS ampliﬁer (see page 15).

33 -

32122 DVD Rec_Centros_GB.indb 33

26.04.2005 11:23:35

Download from Www.Somanuals.com. All Manuals Search And Download.

Using DVDs and Video CDs

Selecting the small picture

Storing the last disc settings

EPG

Press

to select the signal source for the

DVD Video VR

small picture. Each time that the button is pressed,

the different signal sources for the small picture are

displayed as below.

The recorder saves the user settings for the last

disc that you have watched. The settings are saved

until you remove the disc from the recorder or

switch it off.

Tuner, AV1, AV2, AV3, AV4, Tuner

If you insert a disc that has already been played

back, playback will continue from the last stopping

point.

Selecting a TV programme for the small

picture

Use ꢁ / ꢂ to change the programme when the

small picture input is set to Tuner. The number of

the programme selected appears on the screen.

You can replace the large picture with the TV

programme showing in the small picture by using

to end the DVD playback (the small picture

is then suppressed).

PIP (Picture In Picture)

DVD Video VR VCD

This function enables you, during playback, to

watch television programmes or images from other

connected AV sources in a small picture.

Changing the position of the small picture

Press ꢃ / ꢀ repeatedly until you reach the posi-

tion you want. The small picture can be moved

clockwise and counter-clockwise.

Zooming the small picture

RADIO

Press

repeatedly to increase the size of

the small picture. 3 different sizes are available.

PIP on / off

PIP

Press

to switch the small picture on. Press

this button again to switch it back off.

- 34

32122 DVD Rec_Centros_GB.indb 34

26.04.2005 11:23:35

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the Audio CD and MP3

b.) You can switch between the programme list

Playing audio CDs or MP3 discs

Open

and the original list by pressing

37).

(see page

CD MP3

Program add

Folder

The DVD recorder can be used to play audio CDs.

Recordings made in the MP3 format can also be

played back on CD-ROM, CD-R or CD-RW discs

(before playing MP3 recordings, read the advice on

MP3 recordings on page 36).

Press

ous/next list page.

to switch to the previ-

Titles only

c.) With mixed CDs (Audio tracks, MP3 and JPEG

ﬁles) you can switch between the „Audio CD“,

“MP3 CD“ and “Photo CD“ menus by repeatedly

Copy

• Open: Opens the folder and displays its con-

tents.

• Program add: Adds all the tracks in the

selected folder to the programme list (see page

37).

• Folder: Displays the disc‘s folder list if “Title

only“ had previously been chosen to display only

the tracks.

pressing TITLE

when in Stop mode.

1. Insert the disc and close the drawer. The “Music

- Audio CD“ or “Music - MP3 CD“ menu appears

on the screen.

3. To interrupt playback at any time, press

Options in the Music menu

Music

Title

Duration

04:24

04:01

04:09

03:30

04:47

04:11

03:48

05:01

03:01

05:10

- Audio CD

1. To display menu options, select a track (or folder)

In the menu and press OK.

Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

Track 7

Track 8

Track 9

Track 10

• Titles only: Displays all the MP3 ﬁles on the

disc (no folders).

0:52:16

2. Use ꢁ / ꢂ to select an option and then always

press OK to execute the function.

Pause

Options in the Music-Audio CD menu

CD MP3

Select

SET Mark

TEXT

END

Program Close

1. During playback, press

AUDIO CD Menu

Play

2. To continue playback, press

Program add

to replay.

Music

- MP3 CD

152 Items

FILE 1.mp3

FILE 2.mp3

FILE 3.mp3

FILE 4.mp3

FILE 5.mp3

FILE 6.mp3

FILE 7.mp3

FILE 8.mp3

FILE 9.mp3

FILE 10.mp3

• Play: Starts playing the selected track.

• Program add: Adds the selected track to the

programme list. (Page 37)

Playing a different TRACK

0:00:00

CD MP3

• During playback, press P- or P+ once to go to

the next track or to go back to the start of the

current track.

• Press P- - twice to go back to the previous track.

• With an audio CD, if you wish to play a certain

title you can also input the track number directly,

by pressing the number buttons (0-9).

Options in the Music-MP3 menu

Play

Program add

Folder

Titles only

Select

SET Mark

TITLE

Jpeg

TEXT Program

MP3 CD Menu

2. Use ꢁ / ꢂ to select a track, and press

. It begins to play. During playback, the amount

of time that has elapsed of the current track is

displayed In the left-hand window. When the

disc comes to an end, playback stops automati-

cally.

Copy

When a track is selected:

• Play: Starts playing the selected track.

• Program add: Adds the selected track to the

programme list. (Page 37)

• Folder: Displays the disc‘s folder list.

• Titles only: Displays all the MP3 ﬁles on the

disc (no folders).

Notes:

a.) To see the channel that the DVD recorder is

delivering, or the images from the AV inputs,

press DVD-AV/

Use the DISC-M/

CD menu.

EPG

When a folder is selected:

button to return to the

35 -

32122 DVD Rec_Centros_GB.indb 35

26.04.2005 11:23:36

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the Audio CD and MP3

Repeat

To achieve the best possible playback quality, the

2. The “Copy“ menu is displayed.

Copy

discs and recordings that are played on the DVD

recorder should meet certain technical standards.

DVDs that have already been played meet these

standards. With writable disc formats, there are

many different types (e.g. a CD-R with MP3 ﬁles)

that have to meet certain conditions (see above) if

compatibility is to be assured when playing.

CD MP3

Press

for the Repeat type that you want.

Select the album

• TRACK: repeats the current track.

• ALL (CD): repeats all the tracks on the CD.

• FOLDER (MP3): repeats all the tracks In the

current folder.

C:\

Copy

Cancel

New album

• OFF: no repeat.

It should also be noted that permission

is required to download MP3 ﬁles and

music from the Internet. Our company is

not authorised to issue such permission.

The permission required should always be

sought from the copyright holder.

3. Use ꢁ / ꢂ to select the folder on the memory

card that will receive the copy, and then press

ꢀ.

1. During playback, press

The recorder now switches to Search mode.

4. Select “Copy“ and press OK. The selected ﬁles /

folders are copied to the selected folder on the

memory card.

Use “Cancel“ to return to the starting menu.

“New folder“ can be used to create a new folder

on the memory card. You can then copy the

selected ﬁles / folders to it.

2. Use the or buttons to select the

Search direction and the Search speed that you

want:

x2, x4, x8 (backwards) or

x2, x4, x8 (forwards).

The Search speed and Search direction are

displayed on the screen.

Copying ﬁles / folders from a CD to an

audio/photo card

MP3 and photo ﬁles can be copied from a CD to a

memory card in the audio/photo card reader This

can be used, for example, to play ﬁles on portable

playback devices (such as MP3 players).

3. Use

to come out of the Search mode.

Advice on MP3 recording

About MP3

Note: You should be sure to switch off any write

protection on the memory card and check that

there is sufﬁcient storage space on the card.

• An MP3 ﬁle is made up of audio data that have

been compressed using MPEG1 audio layer 3

ﬁle coding. Files with the “.mp3“ extension are

known as MP3 ﬁles.

• The recorder cannot read MP3 ﬁles that have an

extension other than “.mp3“.

1. Use ꢁ / ꢂ to select a ﬁle / a folder on the CD

and then press OK. In the menu that appears,

use ꢁ / ꢂ to select “Copy“ and then press

The compatibility of MP3 discs and this

recorder is subject to the following restric-

tions:

Play

Program add

Folder

1. The physical format of the CD-R should conform

to ISO 9660 and JOLIET.

Titles only

2. If you record MP3 ﬁles with software such as

“Direct CD“, which cannot create a FILE SYSTEM,

you cannot play back MP3 ﬁles.

Copy

3. The total number of ﬁles and folders on the disc

should be no more than 999.

- 36

32122 DVD Rec_Centros_GB.indb 36

26.04.2005 11:23:37

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmed replay with audio CD and MP3

You can use the Program function to combine your

favourite items from a disc or memory card in the

order you want and thus create a personalised

program. The memory will hold either 99 tracks

(audio CD) or 256 tracks (MP3).

The tracks are played back in the order that has

been programmed. Playback stops after the last

track in the programme has played.

Deleting tracks from the programme list

1. Select the programme list track that is to be

deleted.

Note: You can use the button

to select

Options in the Programme list menu

CD MP3

more than one track.

1. Insert an audio CD or an MP3 disc or a memory

card. The “Audio CD“ or “MP3 CD“ / “MP3 card“

menu will display.

2. Press OK.

The options are displayed in the left half of the

menu.

1. To display the menu options for any item in the

programme list, select a track in the “Programme

list“ menu and press OK.

The options are displayed in the left half of the

menu.

2. Use ꢁ / ꢂ to select a track (or folder).

To select more than one track or folder at once:

3. Select “Delete“ and press OK. The selected track

is removed from the programme list.

Note: Select “Delete all“ to remove all the

tracks.

a.) Press

The track/folder will be marked (✓). By pressing

again, you can delete the mark.

b.) Repeat step a) for other tracks (folders).

2. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm.

Changing the track order in the programme

list

Play

Move

3. Press OK.

The options are displayed in the left half of the

menu.

1. Select the track that you wish to move.

Note: You can use the

more than one track.

Delete

Delete all

Copy

button to select

4. Use ꢁ / ꢂ to select the “Program add“ option

and then press OK to transfer the selected items

to the programme list.

Note: When a folder is added to the programme

list, only the tracks in this folder will be copied

- not those in any sub-folders.

2. Press OK.

The options are displayed in the left half of the

menu.

• Play: Playback begins with the selected track in

the programmed order.

• Move: Moves the selected track(s) and changes

3. Select “Move“ and press OK.

A blue deletion line appears in the programme

list.

the order.

5. To add more tracks to the programme list, repeat

steps 2-4.

• Delete: Deletes tracks from the programme list.

• Delete all: Deletes all the tracks from the

programme list.

• Copy (only MP3 list): Copies the selected tracks/

folders to the memory card.

4. Use ꢁ / ꢂ to move the blue deletion line to the

appropriate place, and press OK.

The selected track is moved.

6. When you have ﬁnished creating the programme

list, press

gramme list“ menu (the

to display this in the “Pro-

button switches

between the programme list and the original

list).

Saving programme lists

MP3

This recorder automatically saves the programmed

user list for the disc. The programme list remains

in memory, even when the disc is taken out or the

recorder is switched off..

Repeat programmed tracks

During playback, press

select a Repeat type.

• TRACK: repeats the current track.

• ALL (only CD): repeats all the programmed

tracks on the CD.

• FOLDER (only MP3): repeats all the tracks in

the current folder.

repeatedly to

Music

Title

Duration

04:24

04:01

04:09

03:30

04:47

04:11

03:48

05:01

03:01

05:10

- Audio CD

Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

Track 7

Track 8

Track 9

Track 10

0:52:16

• OFF: no repeat.

Select

SET Mark

TEXT

Program ^ENDClose

7. Use ꢁ / ꢂ to select the programme track that

is to be the ﬁrst one to be played.

Note: With programme lists of more than one

page, you can use

to page

backwards and forwards.

8. Press

37 -

32122 DVD Rec_Centros_GB.indb 37

26.04.2005 11:23:38

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the photo disc

b.) To see the television programme that the DVD

recorder is transmitting, or the images from the

devices attached to the AV inputs, press

below). Speed: To set the slide show speed

(Slow, Normal or Fast).

Playing a photo disc

JPEG

EPG

4. Select “Start“ and press OK to begin the slide

show.

The recorder can be used to play discs with JPEG

ﬁles. Before playback, read the “Notes on JPEG

ﬁles“ on the right.

. Use the

c.) Press

button to go back to the menu.

or in the photo menu

to switch to the previous or next page.

5. Press to stop the slide show and go back

to the photo menu.

d.) With mixed CDs (audio tracks, MP3 and JPEG

ﬁles), when you are in Stop mode you can switch

between the AUDIO CD, MP3 CD and Photo CD

1. Insert the disc and close the drawer.

The photo menu (overview) will appear on the

screen.

Note: You can use the

button to select

menus by repeatedly pressing TITLE

single ﬁles and make them into a slide show.

Photo

- CD

6. Use ꢁ / ꢂ to select the “Full View“ option,

and press OK. Information and user guidance

regarding the current image is displayed in the

lower part of the screen. You can toggle this bar

on and off using OK.

Notes about JPEG ﬁles

Folder 02

JPEG

Folder 01

Depending on the size and number of JPEG ﬁles,

it can take several minutes to read the disc. If

nothing appears on the screen after a few minutes,

some ﬁles are too large. Reduce the resolution of

the JPEG ﬁles to less than 4 Megapixels and burn

the disc again.

There is no limit on the total number of ﬁles

and folders, but the total number of ﬁles in the

folder has to be fewer than 999.

Due to different recording formats or the con-

dition of the CD, some discs may be incompatible.

When using burning software to burn JPEG

ﬁles onto a CD-R, all the selected ﬁles must have

the “.jpg“ or “.jpeg“ extension before they will be

burned onto the CD.

Folder 05

Folder 03

Folder 04

Open

Folder 08

Folder 06

Folder 07

Copy

Select

SET Mark

TITLE

MP3

2. Useꢁ ꢂ ꢃ ꢀ to select a folder, and then

press OK. The left half of the menu displays the

options that you can use on the selected item.

Select a JPEG ﬁle and press OK, then continue

from Point 6.

File 03.jpg

4/20

90°

Stop

END Overview

Note: If the symbol appears in the photo

menu, these JPEG ﬁles cannot be displayed.

7. Return to the overview using

Accessing images one by one

3. Use ꢁ ꢂ ꢃ ꢀ to select the “Open“ option,

and press OK.

In the full display, press

once to

display the next or previous ﬁle.

If the ﬁles have the “.jpe“ extension, they must

be renamed to “.jpg“ or “.jpeg“.

This recorder cannot read ﬁle names without the

“.jpg” or “.jpeg” extension, even if the ﬁles appear

as JPEG images in Windows Explorer.

4. The contents of the selected folder are dis-

played.

Rotating images

JPEG

Photo

- CD

Press ꢁ / ꢂ to rotate an image that is being

displayed 90° clockwise or anti-clockwise.

4/20 Pic.

File 04.jpg

Slide show

Full View

Slide Show

Copy

1. Select “Slide show“ in the photo menu.

Select

SET Mark

TITLE

MP3

Slide Show

5. The options are displayed in the left half of the

menu.

All

Normal

Object

Speed

Start

Cancel

Notes:

a.) To go back from the ﬁle list to the folder

above, press ꢁ / ꢂ on the remote control to

2. Press OK.

The “Slide show“ menu is displayed.

mark the

symbol, and press OK.

3. Use ꢁ ꢂ ꢃ ꢀ to select the options.

Item: display selected ﬁles or all ﬁles (see note

- 38

32122 DVD Rec_Centros_GB.indb 38

26.04.2005 11:23:39

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the audio/photocard reader

Data/memory card compatibility

Overview

The images stored on the card must be in the JPEG

baseline DCF format. Other formats will not be dis-

played and are identiﬁed in the overview by a ques-

About the system

You can use the digital audio/photo card reader

built into the DVD recorder to display on the screen

images from digital cameras with the most common

memory cards.

tion mark. There is a maximum of 8 Megapixels. For

further details about JPEG ﬁles, refer to page 38.

MP3 ﬁles are played at 32 - 320 kBps bit rates

and at variable bit rates.

MP3 audio ﬁles can also be played. You can create

and play a programme list consisting of a selection

of MP3 titles.

You use the Loewe DVD recorder‘s remote control to

operate the audio/photo card reader.

If the memory card is formatted on a PC or Mac, to

then save a series of pictures on the card, it must be

formatted in FAT 12, 16 or 32. Memory cards with

other formats cannot be read.

Secure

Digital

MultiMedia

Card

Memory card capacity

When the memory card is inserted, you can use the

Memory

Stick

CARD

button to switch to using the audio/

Memory Stick (MS)

MultiMediaCard (MMC)

Secure Digital (SD)

16MB … 1 GB

32MB … 256 MB

photo card reader. An overview will appear of the

images or MP3 ﬁles stored on the card - depending

on the last method of use.

Inserting a memory card: Push the card in until

it snaps into place.

Removing a memory card: Press gently on the

middle of the front of the card until it disengages,

and then carefully withdraw the card.

Tested memory cards *

If there are over 9 images stored, you can use

overview.

to go to other pages of the

MS cards

Capacity

Sony

16MB - 1GB

Notes:

You can manually mark and view an image, and

switch to the next or previous image.

SD cards

Apacer

Panasonic

Lexar

Kingston

Toshiba

Transcend

Capacity

128 - 256MB

32MB

128

128MB

• When activating the audio/photo card reader,

the DVD recorder should be idle, with no ad-

ditional screen displays (no menu or Picture In

Picture display).

• Take care with the card‘s polarity / tag (see

diagram above).

• Keep memory cards out of reach of children. If

swallowed, a doctor is required immediately.

• Cards should not be touched with electrical

contacts, or the memory may be damaged.

You can rotate images that were taken in portrait

mode, or that need to be turned upside-down.

The Slide show function can be used to automati-

cally move on to the next image. You can use the

menu to specify how quickly the images should be

changed (see page 41).

128 - 256MB

32 - 64MB

MMC cards Capacity

Pretec

Kodak

Apacer

64MB

64 - 128MB

32MB

MP3 or JPEG ﬁles can be copied from a data CD to

a memory card with enough free storage space, so

that they can be played on, e.g., portable playback

devices (see page 37).

* Playback cannot be guaranteed with

memory cards that have not been tested.

Inserting/removing

memory cards

It is recommended that memory cards are only in-

serted and removed when the unit is switched off.

39 -

32122 DVD Rec_Centros_GB.indb 39

26.04.2005 11:23:41

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the audio/photocard reader

RC3 remote control audio/photo card reader functions

DVD

VCR

STB

MP3 operation: muting

Highlights selection

-Set

-List

REC-MENU

RADIO

abc

jkl

def

ghi

mno

wxyz

PIP

pqrs

tuv

DVD-AV

EPG

Changes signal source

Audio/Photo Card Reader operation off and

main menu on

Audio/Photo Card Reader operation off

/ back to menu

Info menu

MP3 operation:

Changes between MP3 original list / playlist

P+

MP3 operation during playback: next track

Photo operation during playback:

rotates picture left / right

Performs function / Starts playback

/ in menu: selects up/down

V–

V+

Photo operation in menu:

selects or sets right/left

MP3 operation during playback:

press once: to the start of the current track

press repeatedly: previous tracks

MP3 operation: volume - / +

P–

Audio/Photo Card Reader operation on/off

Changes between MP3 / Photo operation

Audio/Photo Card Reader operation off

and ShowView menu on

Scrolls backwards in list /

Scrolls forwards in list /

Photo operation during playback: previous picture

Photo operation during playback: next picture

Ends playback

/ back to menu

MP3 operation: starts playback

Pause

- 40

32122 DVD Rec_Centros_GB.indb 40

26.04.2005 11:23:41

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the audio/photocard reader

a.) To go back from the ﬁle list to the folder

above, press ꢁ / ꢂ on the remote control to

2. Press OK.

The “Slide show“ menu is displayed.

Using photo

mark the

symbol, and press OK.

Slide Show

b.) To see the television programme that the

DVD recorder is transmitting, or the images from

the devices attached to the AV inputs, press

Displaying image ﬁles

All

Normal

Object

Speed

1. Press the CARD

button and the “Photo

Start

Cancel

DVD-AV/ ^EPG. Use the DISC-M/

go back to the menu.

button to

card“ mode will display.

The photo menu appears on the screen.

3. Use ꢁ ꢂ ꢃ ꢀ to select the options.

Item: display selected ﬁles or all ﬁles. Speed: To

set the slide show speed (Slow, Normal or Fast).

c.) Press

in the photo menu

to switch to the previous or next page.

Photo

- Card

d.) With mixed CDs (audio tracks, MP3 and JPEG

ﬁles), when you are in Stop mode you can switch

between the “Music MP3 card“ and “Photo

4. Select “Start“ and press OK to begin the slide

Folder 02

JPEG

Folder 01

show.

card“ menus by repeatedly pressing TITLE

Folder 05

Folder 03

Folder 04

5. Press

to stop the slide show and go back

6. Use ꢁ / ꢂ to select the “Full view“ option,

and press OK. Information and user guidance

regarding the current image is displayed in the

to the photo menu.

Open

Folder 08

Folder 06

Folder 07

6. Note: You can use the

single ﬁles and make them into a slide show.

button to select

Delete

Select

SET Mark

TITLE

MP3

lower part of the screen. You can toggle this bar

on and off using OK.

2. Use ꢁ ꢂ ꢃ ꢀ to select a folder, and then

press OK. The left half of the menu displays the

options that you can use on the selected item.

Select a JPEG ﬁle and press OK, then continue

from Point 6.

Deleting images or folders

1. Use ꢁ ꢂ ꢃ ꢀ to select the folder or ﬁle that

is to be deleted.

To delete more than one folder/ﬁle, ﬁrst use the

button to mark them.

Note: If the symbol appears in the photo

menu, these JPEG ﬁles cannot be displayed.

File 03.jpg

2. Press OK and select “Delete“ from the photo

menu.

The “Delete“ menu is displayed.

3. Use ꢁ ꢂ ꢃ ꢀ to select the “Open“ option,

and press OK.

4/20

90°

Stop

END Overview

7. Return to the overview using

Delete selected files?

4. The contents of the selected folder are displayed.

Yes

JPEG

Note: To go to the folder above, use ꢁ ꢂ to

mark , and press OK.

Photo

- Card

3. Select “Yes“ if you want to permanently delete

the selected folders/ﬁles, and press OK. The

delete procedure on the memory card cannot be

reversed.

4/20 Pic.

File 04.jpg

Accessing images one by one

In the full display, press

once to

display the next or previous ﬁle.

Full View

Slide Show

Note: You may need to ensure that, if the memory

Delete

card is write-protected, this is removed in advance.

Select

SET Mark

TITLE

MP3

Rotating images

5. The options are displayed in the left half of the

menu.

Press ꢁ / ꢂ to rotate an image that is being

displayed 90° clockwise or anti-clockwise.

Slide show

1. Select “Slide show“ in the photo menu.

Notes:

41 -

32122 DVD Rec_Centros_GB.indb 41

26.04.2005 11:23:42

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the audio/photocard reader

Press

in the “Music-MP3

When a folder is selected:

Using MP3

card“ menu to switch to the previous/next page.

When the memory card has mixed content (MP3

and JPEG ﬁles), you can press TITLE

in Stop mode to toggle between the “Music-MP3

card“ and “Photo-card“ menus.

Open

when

Playing MP3 ﬁles

Program add

Delete

Before playing MP3 recordings, read the notes

regarding MP3 recordings on page 36.

4. To interrupt playback at any time, press

• Open: Displays a subfolder and all MP3 ﬁles in

this folder.

• Program add: Adds all the tracks in the folder

to the list. (see page 37)

• Delete: Deletes the selected folder.

1. Insert the memory card. Press the CARD

button. The “Music-MP3 card“ or “Photo-card“

modes appear. In the latter case, press the TI-

Options in the Music menu

TLE

button so that the „Music-MP3 card“

1. To display menu options, select a track (or folder)

In the menu and press OK.

menu appears on the screen.

Music

2. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm.

Note: Only empty folders can be deleted.

- MP3 Card

2 Items

Folder1

Folder2

Pause

Options in the Music MP3 card menu

0:00:00

Play

Program add

1. During playback, press

Open

Program add

Delete

2. To continue playback, press

or again

Select

SET Mark

Delete

TEXT

TITLE

Program

Jpeg

Playing a different TRACK

2. Use ꢁ ꢂ ꢃ ꢀ to select a folder or ﬁle, and

press OK.

The menu options are displayed on the left.

If you have selected a folder and pressed OK,

select the “Open“ option from the menu and

press OK.

When a track is selected:

• Play: Starts playing the selected track.

• Program add: Adds tracks to the programme

list. (page 37)

• During playback, press P- or P+ once to go to

the next track or to go back to the start of the

current track.

• Delete: Deletes the selected track.

• Press P- twice to go back to the previous track.

Repeating

Music

- MP3 Card

152 Items

FILE 1.mp3

FILE 2.mp3

FILE 3.mp3

FILE 4.mp3

FILE 5.mp3

FILE 6.mp3

FILE 7.mp3

FILE 8.mp3

FILE 9.mp3

FILE 10.mp3

Press

for the Repeat type that you want.

• TRACK: repeats the current track.

• FOLDER: repeats all the tracks in the current

folder.

0:00:00

• OFF: no repeat.

Select

SET Mark

TEXT

TITLE

Program Jpeg

3. Use ꢁ / ꢂ to select a ﬁle and press

press OK, then select „Play“ from the menu op-

tions that appear, and press OK again. Playback

begins. During playback, the amount of time

that has elapsed of the current track is displayed

in the menu. When the list comes to an end,

playback will stop.

You can press DISC-M/

to toggle between

the original list and the programme list.

- 42

32122 DVD Rec_Centros_GB.indb 42

26.04.2005 11:23:43

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording - ﬁrst steps

Checking the recording time

Stopping the recording

Manual recording

Press

once to check the recording time. The

1. Press

ing.

to stop the disc during a record-

length of recording time that remains will display.

When the button is pressed again, while the dis-

play is still visible, “Continue“ will display instead

of the length of recording time that remains.

Proceed as follows to record television pro-

grammes.

Recording will start immediately and will continue

until the disc is full or you stop the recording.

2. If you wish to continue the recording, press

1. Switch the recorder on and insert a writable disc.

Extending the recording time

You can extend the recording time whenever

Immediate Timer Recording

Using the DVD-AV/

button, switch the

recorder input to the signal source that you wish

to record from. If you insert an empty disc, it is

ﬁrst initialised automatically by the recorder (see

page 25).

The “Immediate Timer Recording“ enables you to

make a recording with a speciﬁed length without

using the programme timer.

you wish by pressing

displayed.

while “Continue“ is

Each time that

is pressed, the recording will

1. Follow steps 1-4 (see “Manual recording“).

extend by 10 minutes, and the new recording time

will be displayed instead of “Continue“.

2. Set the recording quality (see page 24).

2. Press

several times to set the duration of

3. If you wish to record a TV programme, use the

P+ / P- buttons to select a television programme

or a signal source (e.g. AV1).

The programme number, name and the current

sound status are displayed on the screen.

• For dual-language TV recordings, select the

sound channel in the “Record ➜ TV rec audio“

submenu in the main menu

the recording.

Recording will begin after the ﬁrst press of the

button. Each additional press of the button ex-

tends the length of the recording by 10 minutes.

When the set time elapses, the DVD recorder will

stop recording. It then automatically switches

off.

Caution: If the recorder is cut off from the power

supply while it is recording (or if there is a power

cut), the recording will be lost.

(see page 25).

Continue

65Min free

• This recorder can also record NICAM audio. If

the NICAM setting (see page 20) is set to Auto,

audio will be automatically changed to NICAM

whenever a NICAM programme is broadcast. If

poor reception distorts the NICAM sound, you

can switch off the programme‘s NICAM setting.

“Immediate Timer Recording“ menu

4. Press

once.

Recording will begin. (The red REC display

comes on in the DVD recorder‘s display window.)

5. Recording will go on until you press

until the disc is full.

You can ﬁnd out about specifying the length of

the recording under “Immediate Timer Record-

ing“.

43 -

32122 DVD Rec_Centros_GB.indb 43

26.04.2005 11:23:44

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer recording

This DVD recorder can be programmed so that it

can make up to seven recordings in a month. For

recording with nobody in attendance, the timer has

to know which signal sources (TV stations or from

AV devices) should be recorded, and it needs the

start time and the inputs which deﬁne the record-

ing length.

Notes:

• You should be aware that not all stations

work with VPS.

• The timer‘s LED lights up in the unit‘s display

window when the recorder is in standby mode

and at least one timer recording has been

programmed.

• For dual-language TV recordings, select the

sound channel in the “Record ➜ TV rec audio“

submenu in the main menu (see page 25).

• To stop a timer recording that is underway, press

• Stations that use VPS/PDC usually have

VPS/PDC information on their teletext pages.

Look for information on those pages when

you are going to make a timer recording.

• It takes around 30 seconds for the recorder

to tune in and for recording to begin. If you

are using VPS/PDC, the ﬁrst few seconds of

the programme may not be recorded.

• The actual time of day and the actual date

will have to be keyed into the DVD recorder

(see page 20).

the

button.

1. Insert a writable disc and press

• The recording‘s start time must be at least 3

minutes into the future!

The “Timer Recording“ menu is displayed.

Timer-Record

196Min. Free

VPS/

Date

Start Time Length

Mode

Repeat

Once

PDC

9/5 Tu

19:20

- - - -

Off

C7 BBC

END

REC-MENU

Enter

Timer Record List

2. Input the information needed for your timer

recording(s).

• PR – Select a stored programme number or

one of the external inputs for the recording.

• Date – Select a date that lies, at most, one

month from the current date.

• Start Time – Sets the recording‘s start time

(see Notes).

• ꢃ / ꢀ (left/right) – select the input ﬁelds

• ꢁ / ꢂ (up/down) – changes the setting in

the active input ﬁeld.

The other options in this menu are:

• OK - saves your inputs in the timer

(see point 3).

• Length – Sets the duration of the recording.

• Mode – Select a recording quality

(HQ, SQ, LQ, EQ, or AT).

•

- closes the menu and discards the

inputs.

•

- opens the timer recording list.

The AT (Auto) mode establishes how much

disc time is available and, if necessary,

switches to the recording quality to stop

recording the programme (see page 24 for

the other modes).

• Repeat – Select the repeat type that you

require (once, daily (Monday - Friday) or

weekly).

• VPS/PDC – The VPS/PDC system automati-

cally alters the recording time so that you do

not miss the programme if the programme

schedule has been changed. For VPS/PDC to

work properly, you need to key in the VPS

time (which may differ from the actual time

of day - see the Notes below) and the date

of the programme that you wish to record.

3. When you press OK the DVD recorder saves the

programmed recording and displays the timer

recording list.

Check in the “Status“ column that the timer

recording has been programmed correctly and a

playable disc has been inserted.

4. Press

5. Press

to close the timer recording list.

to switch the unit to standby.

- 44

32122 DVD Rec_Centros_GB.indb 44

26.04.2005 11:23:46

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer recordings with the ShowView ® system

Programming timer recordings with this system

is child‘s play. Most television schedule publica-

tions include the SHOWVIEW code numbers along

with the information about the programmes. So

when you want to make a timer recording of a

programme, you only need to key in the appropri-

ate SHOWVIEW code number. The date, start time,

end time and station are set automatically. You

only need to set the recording quality and specify

whether it is to be a one-off or repeated recording.

You can save up to seven timer programmes on the

recorder.

• There is no electric current.

Checking/changing the timer recording

details

• 99 titles have already been recorded on the disc.

• The recording start time is less than 3 minutes

from the time it was programmed.

You can check the programming when the DVD

recorder is switched on. Press

twice. The

“Timer recording list“ menu is displayed.

You cannot program the timer under the

following circumstances:

• A recording is already in progress.

• The start time required is in the past.

• Seven timer recordings have already been

programmed.

Timer Record List

VPS/

Length

30M

Date

Start Time

Mode

Check

Rec. OK

PDC

10/4 Di

19:20

Off

20:15

45M

Off

Multiple overlapping timer programs:

• The earlier recording takes priority.

• When the earlier recording ends, the later one

will start.

• When two recordings begin at the same time,

the ﬁrst to be input takes priority.

1. Press the green key SV/

The “Showview“ menu is displayed.

REC-MENU

Timer Record

END

Edit

Delete

Showview

Number

Repeat

Once

Edit a timer program

• Use ꢁ / ꢂ to select a timer recording that you

wish to check.

• Press OK to go to the selected program.

If the disc is damaged, it is possible that the

recording will not be done properly. Even if the

“Recording OK” message appears in the “Status“

ﬁeld, this is not necessarily true in this case.

END

0-9 Input

Enter

Delete

To close the menu, press SV again

Input ﬁelds

• Number – key in the SHOWVIEW code

number.

• Repeat – select the repeat type that you

require (once, daily or weekly).

• Press

to open the “Timer recording“

menu, where you can make the change.

Deleting a timer program

You can deleted a timer program at any time before

recording starts.

Use ꢁ / ꢂ to select the entry in the timer record-

ing list that you want to delete. If you wish to

2. Use the number buttons to input the SHOWVIEW

code number.

• ꢃ / ꢀ (left/right) – select the input ﬁelds.

• If you make a wrong input, press repeatedly

before you press OK to delete the

delete the recording, press

numbers one by one and then correct the

password. You can also use ꢃ / ꢀ to go

straight to the input ﬁeld that you wish to

correct and then overwrite the numbers that

are there by using 0-9.

Cancelling a timer recording

After a timer recording has begun, you can cancel

it at any time by pressing

3. Use ꢃ / ꢀ to place the cursor in the “Repeat“

column. Use ꢁ / ꢂ to select the “Repeat“ op-

tion (once, daily [Monday - Friday] or weekly).

Conditions that will prevent recording

When the timer has been programmed, the

recorder will not record under the following circum-

stances:

4. When you have input all the programme‘s

details, press OK.

The “Timer recording“ menu will appear. The

settings can be altered from here.

• No disc has been inserted.

• A non-writable disc has been inserted.

• “Disc protection“ is switched on in the main

menu (see page 27).

5. Carry out steps 3-5 on the previous page (Timer

recording).

45 -

32122 DVD Rec_Centros_GB.indb 45

26.04.2005 11:23:46

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording from external sources

Recording from external components

General “DV“ information

DV messages

You can record from an external source, e.g. a

camcorder or video recorder connected to one of

the recorder‘s external inputs.

With DV (Digital Video, also known as i.LINK),

you can use a DV cable as the audio, video, data

and control signals input / output to connect a

camcorder that has DV to this recorder. The i.LINK

interface complies with the IEEE 1394-1995

standard.

When you are using the DV IN socket, the follow-

ing messages may appear on the screen.

Not connected to camcorder

The camcorder is not properly connected, or the

camcorder is switched off.

1. The component that you wish to record from

must be properly connected to the DVD recorder.

Further information can be found on Page 16.

“i.LINK” and the “i.LINK”logo are trademarks.

EPG

2. Press DVD-AV/

several times to select

Too many devices connected

This recorder‘s DV socket only supports the connec-

tion of one camcorder.

the external input which is to be used to make

the recording.

• Tuner: integrated tuner

• AV1: EURO AV1 AUDIO VIDEO to the rear of

the housing

• AV2: EURO AV2 DECODER to the rear of the

housing

• AV3: AUDIO AV IN 3 / VIDEO IN 3 to the rear

of the housing

• AV4: AUDIO IN 4 / VIDEO IN 4 / S-Video IN

to the front of the housing

• This recorder is only compatible with DV-format

(DV-25) camcorders. Digital satellite tuners and

digital VHS video recorders are not compatible.

• You cannot connect more than one DV cam-

corder at a time to this recorder.

• You cannot control this recorder with external

devices that are connected via the DV IN socket

(incl. two DVD recorders).

• The camcorder connected via the DV IN socket

cannot necessarily, in every case, be controlled.

• Digital camcorders can usually record audio as

16 bit/48 kHz stereo or twin stereo tracks with

12 bit/32 kHz. This recorder can only record one

stereo audio track. Set “Record ➜ DV sound“ as

required or Audio 1 or Audio 2 (see page 25).

• The sampling rate of the digital sound input to

the DV IN socket must be either 32 or 48 kHz

(not 44.1 kHz).

• Recording may suffer from interference if the

camcorder stops playing back, if a part of the

tape that has not been recorded on is played

back, if the electricity supply to the camcorder is

cut off, or if the DV cable comes out.

Check tape

There is no tape in the device that is connected.

Incompatible device

The recorder is unable to control the camcorder.

Information is being reloaded

The camcorder is updating data for DV.

• DV: DV IN to the front of the housing.

3. Insert a writable disc. If you insert an empty disc,

it is ﬁrst initialised automatically by the recorder

(see page 24).

Camera mode

The camcorder is set to camera mode.

4. Set the recording quality (see page 24).

Troubleshooting

5. Press

once.

If you are not receiving images and/or sound via

the DV IN socket, check the following:

The DV cable must be properly connected.

Switch off the camcorder that is connected, and

switch it back on.

Recording begins (the red REC comes on in the

unit‘s display window).

Recording will go on until you press

until the disc is full.

You can ﬁnd out about specifying the length of

the recording under “Immediate Timer Record-

ing“ on page 43.

• When “Record DV sound“ is set to “Audio 2“

and there is no Audio 2 signal, „Record ➜ DV

sound“ will automatically be set to “Audio 1“.

Tune the audio input in to the DVD recorder.

Note: This DVD recorder cannot necessarily control

every camcorder that is connected to it.

6. To stop the recording press

Note: If your source is copy-protected by Copy-

Guard, you cannot use this recorder to record from

it. Read the copyright notes on page 12.

- 46

32122 DVD Rec_Centros_GB.indb 46

26.04.2005 11:23:47

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording from external sources

DVD recorder fails to recognise a signal.

• You can pause or stop the recording by

pressing or . You cannot use

the DVD recorder to control the camcorder

while recording is in progress.

• In Video mode, the last frame of the record-

ing is shown on the screen for a short time

after recording has ended.

• For timer recordings to work properly on this

recorder, the digital camcorder should be

switched on and operational.

Recording from a digital camcorder

You can record from a camcorder that is connected

to the DV IN socket in the recorder‘s front panel.

You can use the recorder‘s remote to control a cam-

corder and the recorder. Before recording, make

sure that the audio input has been set up for the

DV IN socket (see page 25).

Notes:

• The source signal must be in the DV-25 format.

• The DVD recorder cannot control all camcorders.

• If you use a DV cable to connect a second DVD

recorder, you cannot use the ﬁrst device to

control the second DVD recorder.

• You cannot use a device that is connected to

the DV IN socket to control the DVD recorder

remotely.

• You cannot record the date and time information

from a DV cassette.

1. The digital camcorder must be connected to the

DV IN socket at the front of the housing. Further

information can be found on Page 16.

2. Check that the DV audio input fulﬁls the neces-

sary conditions.

You can choose from between Audio 1 (original

audio) and Audio 2 (overdubbed audio).

The DV input is set using the “Record ➜ DV

sound“ submenu of the main menu (see page

25).

EPG

3. Press DVD-AV/

DV input.

repeatedly to select the

“DV“ appears in the DVD recorder‘s display

window and on the screen.

4. Look for the point on the camcorder tape that

you wish to record from.

For the best results, you should stop the play-

back at the point that you wish to record from.

Depending on the camcorder, you can use the

Stop, PLAY and PAUSE functions on the DVD

recorder.

5. Press

once to start the recording.

• The recording is automatically stopped if the

47 -

32122 DVD Rec_Centros_GB.indb 47

26.04.2005 11:23:48

Download from Www.Somanuals.com. All Manuals Search And Download.

Title List and Chapter List (VR)

• Protect: Prevents inadvertent changing or

4. To display the “Chapter List-Original“ menu op-

tions, select the desired chapter and press OK.

The options are displayed on the left side of the

menu.

The “Title List-Original”

Menu ^VR

deleting of a title (see page 57).

• Edit: Contains the following editing op-

tions:

The playlist (see page 49) is created and edited in

the “Title List-Original“ menu, titles can be deleted

and other changes can be made to the original

content of the disc. Different playlists (dependent

on the program with an audio CD) can be created

and edited.

The individual titles can be played directly

from the menu. The unit must be in stop mode in

order to edit a title in this menu.

* Rename: Edits the title name.

* Delete part: Deletes a part of the title.

* Undo: Undoes the last deletion

(see page 55).

* Redo: Redoes the undo action

(see page 55).

5. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm.

Play

Title List

Delete

• Playlists: Adds the selected title to the end

of a playlist of your choice.

Combine

Playlists

3. Press

repeatedly to quit the “Title List-

Original“ menu.

1. Press DISC-M/

Original“ menu.

to call up the “Title List-

• Play: Starts playing the selected chapter.

• Title list: Changes to the “Title List-Origi-

nal“ menu (see left side of this page).

• Delete: Deletes the selected chapter

(see page 54).

Note: Press

to display more detailed infor-

With more than 6 titles use ꢁ / ꢂ to display

the previous/next page.

mation about the selected title.

Press

to quit the “Title List-Original“

menu.

• Combine: Combines two chapters into one

(see page 56).

• Playlists: Adds the selected chapter to the

end of a playlist of your choice

(see page 53).

The “Chapter List-Original”

Menu ^VR

1/12

Title List

- Original

DVD-RW

TITLE

7/12

TITLE

9/12

TITLE

10/12

1H 5M

0:16:00

0:35:00

0:30:00

Free

1. Press DISC-M/

Original“ menu.

to call up the “Title List-

6. Press

repeatedly to quit the “Chapter

List-Original“ menu.

TITLE

13/12

TITLE

0:08:00 16/12

TITLE

0:10:00 19/12

2. Use ꢁ ꢂ ꢃ ꢀ to select the title for which you

want to display the corresponding chapter list

and press OK.

0:15:00

END

Select

^INFOInfo

^TEXTPlaylists

The options are displayed on the left side of the

menu.

2. To display the Title List-Original options, select

the desired title and press OK.

The options are displayed on the left side of the

menu.

Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm

3. Use ꢁ / ꢂ to select the “Chapter List“ option,

and press OK.

The “Chapter List-Original“ menu is displayed on

the screen.

• Play: Starts playing the selected title.

Play

Chapter List

Delete

Chapter List

TITLE

7/12 Su 30M56S

Original

1/9

Protect

Edit

Rename

Delete Part

Playlists

Undo

Redo

• Chapter List: Changes to the “Chapter

List-Original List“ for the selected title.

• Delete: Deletes the selected title (see page

50).

Select

^TEXTPlaylists

^ENDClose

- 48

32122 DVD Rec_Centros_GB.indb 48

26.04.2005 11:23:48

Download from Www.Somanuals.com. All Manuals Search And Download.

Title List and Chapter List (VR)

• Combine: Combines two chapters into one

(see page 56).

• Move: Moves the selected chapter to

another desired position in the playlist (see

page 56).

Press

ists“ menu..

repeatedly to quit the “Title List-Playl-

The “Title List-Playlists”

Menu ^VR

Note:

Press

A playlist is list of any titles and chapters.

to display more detailed information

1. Press DISC-M/

twice to call up the “Title

about the selected playlist.

List-Playlists“ menu.

• With more than 6 titles use ꢁ / ꢂ to

display the previous/next page.

Play

Title List

Delete

The “Chapter List-Playlists”

Menu ^VR

• To quit Title List-Playlists, press

1/12

Title List

- Playlists

Combine

Move

1. Press DISC-M/

List-Playlists“ menu.

twice to call up the “Title

DVD-RW

TITLE 1

7/12

TITLE 2

9/12

TITLE 3

10/12

1H 5M

0:16:00

0:35:00

0:30:00

Free

2. Use ꢁ ꢂ ꢃ ꢀ to select the title (playlist) for

which you want to display the corresponding

chapter playlist and press OK.

The options are displayed on the left side of the

menu.

6. Press

repeatedly to quit the “Chapter

List-Playlists“ menu.

TITLE 4

13/12

TITLE 5

0:08:00 16/12

TITLE 6

0:10:00 19/12

0:15:00

INFO

TEXT

END

Select

Info

Original

3. Use ꢁ / ꢂ to select the “Chapter List“ option,

and press OK.

The “Chapter List-Playlists“ menu is displayed on

the screen.

2. To display the options, select the desired title

and press OK.

The options are displayed on the left side of the

menu.

Chapter List

TITLE 1

7/12 Su 30M56S

- Playlists

3. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm.

1/9

Play

Chapter List

Delete

Select

TEXT

END

Original

Rename

Delete part

4. To display the options, select the desired chapter

and press OK.

• Play: Starts playing the selected playlist.

• Chapter list: Changes to the “Chapter List-

Playlists“ for the selected title.

• Delete: Deletes the selected playlist

(see page 54).

• Rename: Enables renaming of the selected

playlist (see page 56).

• Delete part: Deletes a part of the selected

The options are displayed on the left side of the

menu.

5. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm.

• Play: Starts playing the selected chapter.

• Title list: Changes to the “Title List-Playl-

ists“ menu.

• Delete: Deletes the selected chapter from

the playlist (see page 54).

playlist (see page 55).

49 -

32122 DVD Rec_Centros_GB.indb 49

26.04.2005 11:23:50

Download from Www.Somanuals.com. All Manuals Search And Download.

Title List and Chapter List (Video)

Deleting a Title

After Finalization of the Disc

The “Title List“ Menu

Video

Before ﬁnalizing a disc you can delete titles

recorded on the disc.

Following insertion of a ﬁnalized disc, the disc

menu (previously “Title List“) appears automatically

as shown below:

All recorded titles are listed in the “Title List“ menu.

Titles can also be played, renamed and deleted

here.

Once a disc has been ﬁnalized in Video mode the

functionality is limited and you can only play titles.

Caution:

Current Page / Total Number of Pages

Disc Name

Title Data

• If you delete a title from a DVD-R disc, the title

is hidden from the Title List but the available

recording time does not increase.

• If you delete a title from a DVD-RW disc, the

remaining recording time will only increase if

the title is the last one on the disc. In this case

it is actually deleted, in other cases it is simply

hidden.

1. Press DISC-M/

to display the Title List.

DVD-RW

1/2

Title List

1/12

Duration

Title

Date

TITLE

12/11 0:30:21

14/11 0:20:08

18/11 1:10:03

20/11 0:43:21

23/11 0:15:21

25/11 1:13:21

PAGE

TITLE1

TITLE2

TITLE3

TITLE4

TITLE5

TITLE6

12/11

0:20:15

0:43:30

0:33:00

0:10:00

0:15:00

0:17:00

DVD-RW

PAGE

14/11

18/11

20/11

23/11

25/11

DOWN

1H 5M

Free

1. Press DISC-M/

to display the title list.

2. Use ꢁ ꢂ ꢃ ꢀ to select the title you want to

delete and press OK.

The options are displayed on the left side of the

menu.

EXIT

INFO

END

Select

Info

2. Use ꢁ / ꢂ to select a title, and press OK.

The options are displayed on the left side of the

menu.

With “PAGE UP“ or “PAGE DOWN“ you can scroll

to other pages as required.

You can quit this menu using EXIT.

3. Use ꢁ / ꢂ to select “Delete“, and press OK to

conﬁrm.

After pressing OK a new, updated title list is

displayed.

3. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm.

Press OK or

to play the selected title.

Play

Rename

Using ꢁ / ꢂ and OK you can scroll up and down

the list as required or you can use “Exit” to quit the

menu.

Play

Rename

Delete

4. Repeat steps 2 - 3 to delete other titles from the

title list.

• Play: Starts playing the selected title.

• Rename : Edits the title name. (page 56)

• Delete: Deletes the selected title from the

title list.

5. Press

repeatedly to hide the title list.

4. Press

menu.

repeatedly to quit the “Title List“

Note: Press

to display more detailed infor-

mation about the selected title.

- 50

32122 DVD Rec_Centros_GB.indb 50

26.04.2005 11:23:51

Download from Www.Somanuals.com. All Manuals Search And Download.

Title List and Chapter List

The “Title List“ Menu

Video +RW

• Play: Starts playing the selected title with-

TITLE 1

Chapter List

7/12 Sa 30M56S

out hidden chapters.

All recorded titles are displayed in the title list,

titles can be deleted and other changes can be

made to the original content of the disc. Titles can

be played directly from the “Title List“ menu. The

DVD recorder must not be in play mode when edit-

ing using the “Title List“ menu.

1/9

• Play all: Starts playing the selected title

including the hidden chapters.

• Chapter list: Changes to the “Chapter

List“ menu for the selected title.

• Delete: Deletes the selected title

(see page 54).

• Protect: Prevents inadvertent overwriting,

changing or deleting of a title

(see page 57).

• Edit: Contains the following editing op-

tions:

* Rename: Edits the title name

(see page 56).

Select

END

1. Press DISC-M/

menu.

to open the “Title List“

4. To display the chapter list options, select the

desired chapter and press OK.

With more than 6 titles use ꢁ / ꢂ to display

the previous/next page.

The options are displayed on the left side of the

menu.

Press

to quit the “Title List“ menu.

5. Use ꢁ / ꢂ to select an option, and press OK

* Divide: Divides a title in two parts

(see page 57).

to conﬁrm.

1/12

Title List

* Hide: Hides/Shows all chapters within

the title (see page 57).

Play

TITLE 1

7/12

TITLE 2

9/12

TITLE 3

10/12

Title List

Combine

Hide

SQ 1H 5M

0:16:00

0:35:00

0:30:00

Free

4. Press

repeatedly to quit the “Title List“

menu.

TITLE

13/12

0:08:00 16/12

0:10:00 19/12

0:15:00

Note: Press

to display more detailed infor-

• Play: Starts playing the selected chapter.

• Title list: Changes to the chapter “Title

List“ menu (see left side of this page).

• Combine: Combines two chapters into one

(see page 56).

• Hide: If you play a higher-level title, the

selected chapter will not be played (if you

select the function again, the selected

chapter is played (see page 57)).

INFO

END

Select

Info

REC

mation about the selected title.

2. To display the title list options, select the desired

title and press OK.

The options are displayed on the left side of the

menu.

Caution: If you press

in the “Title List“

menu, the selected title will be deleted and record-

ing begins (see page 54 for further information).

3. Use ꢁ / ꢂ to select an option, and press OK

Using the “Chapter List“ Menu

to conﬁrm.

6. Press

List“ menu.

repeatedly to quit the “Chapter

1. Press DISC-M/

for the “Title List“ menu.

Play

2. Use ꢁ ꢂ ꢃ ꢀ to select the desired title and

press OK. The options are displayed on the left

side of the menu.

Play all

Chapter List

Delete

3. Use ꢁ / ꢂ to select the “Chapter List“ option

and press OK.

The “Chapter List“ menu is displayed.

Rename

Protect

Edit

Divide

Hide

51 -

32122 DVD Rec_Centros_GB.indb 51

26.04.2005 11:23:52

Download from Www.Somanuals.com. All Manuals Search And Download.

Title List and Chapter List

including the hidden chapters.

The “Title List“ Menu

Video +R

5. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm

• Chapter list: Changes to the “Chapter

List“ menu for the selected title.

• Delete: Deletes the selected title

(see page 54).

• Protect: Prevents inadvertent overwriting,

changing or deleting of a title

(see page 57).

All recorded titles are displayed in the title list,

titles can be deleted and other changes can be

made to the original content of the disc.

Titles can be played directly from the “Title List“

menu. The DVD recorder must not be in play mode

when editing using the “Title List“ men

Play

Title List

Combine

Hide

• Edit: Contains the following editing op-

tions:

1. Press DISC-M/

menu.

With more than 6 titles use ꢁ / ꢂ to display

to open the “Title List“

* Rename: Edits the title name

(see page 56).

* Divide: Divides a title in two parts

(see page 57).

* Hide: Hides/Shows all chapters within

the title (see page 57).

• Play: Starts playing the selected chapter.

• Title list: Changes to the chapter “Title

List“ menu (see left side of this page).

• Combine: Combines two chapters into one

(see page 56).

• Hide: If you play a higher-level title, the

selected chapter will not be played (if you

select the function again, the selected

chapter is played (see page 57)).

the previous/next page.

Press

to quit the “Title List“ menu.

1/12

Title List

4. Press

menu.

repeatedly to quit the “Title List“

DVD+R

TITLE 1

TITLE 2

9/12

TITLE

10/12

1H 5M

0:16:00

0:35:00

0:30:00

7/12

Free

Note: Press

mation about the selected title.

to display more detailed infor-

6. Press

List“ menu.

repeatedly to quit the “Chapter

TITLE

13/12

TITLE

0:08:00 16/12

0:10:00 19/12

0:15:00

END

Select

^INFOInfo

Using the “Chapter List“ Menu

2. To display the title list options, select the desired

title and press OK.

1. Press DISC-M/

for the “Title List“ menu.

The options are displayed on the left side of the

menu.

2. Use ꢁ ꢂ ꢃ ꢀ to select the desired title and

press OK. The options are displayed on the left

side of the menu.

3. Use ꢁ / ꢂ to select an option, and press OK

to conﬁrm.

3. Use ꢁ / ꢂ to select the “Chapter List“ option

and press OK.

The “Chapter List“ menu is displayed.

Play

Play all

Chapter List

Delete

Chapter List

TITLE 1

7/12 Sa 30M56S

1/9

Protect

Edit

Rename

Divide

Hide

Select

END

4. To display the chapter list options, select the

desired chapter and press OK.

The options are displayed on the left side of the

menu.

• Play: Starts playing the selected title with-

out hidden chapters.

• Play all: Starts playing the selected title

- 52

32122 DVD Rec_Centros_GB.indb 52

26.04.2005 11:23:54

Download from Www.Somanuals.com. All Manuals Search And Download.

Title and Chapter Editing

Original Lists and Playlists

Adding Chapter Markers

Creating a New Playlist

If you edit the original lists (for titles and chapters)

you change the content of the disc. If, for example,

you delete a title or a chapter, the title or chapter is

deleted from the disc.

However, if you edit a playlist you do not change

the content of the disc. Example: If you delete a

title from the playlist, you are simply telling the

DVD recorder not to play the title. However, it is

not deleted from the disc.

You can copy titles or chapters from the appropri-

ate original list into a pre-selected playlist and add

them as chapters at the end. (You can delete parts

you do not need at a later date. See “Deleting a

Part“ on page 55).

However, if you add chapter markers at a later

date to an item in the original list that has already

been copied into a playlist, these new chapter

markers are not automatically transferred to the

corresponding item in the playlist.

Chapter

You can insert a chapter marker anywhere in a

playlist or an original title during recording or

playback.

Once the chapters have been marked, the chapter

search can be used and chapters can be deleted,

combined and moved in the Chapter List-Original

or the Chapter List-Playlist.

You can insert up to 999 chapter markers.

Titles, Chapters and Parts

1. Play a title (original or from a playlist).

1. Press DISC-M/

Original“ menu.

to call up the “Title List-

2. Press C-SET

chapter to start. The above display appears on

the screen.

at the point you want a new

To ﬁnd out how to call up the “Chapter List-Orig-

inal“ menu, read the “The Chapter List-Original

Menu“ on page 48.

Titles in the disc‘s original content contain one or

more chapters. If you insert a title into a playlist, all

the chapters within that title are also transferred.

The chapters in a playlist behave in exactly the

same way as those on a DVD-Video disc.

Parts are sections of original or playlist titles.

You can add parts to a playlist via the “Title List-

Original“ and “Chapter List-Original“ menus. You

can also delete parts from a playlist.

2. Select a title or a chapter in the “Original“ menu

that you want to put in a playlist and press OK.

The options are displayed on the left side of the

“Original“ menu.

Notes:

• Chapter markers can also be added automati-

cally at regular intervals.

• You can change this interval in the main menu

“Recording ➜ Automatic Chapter“

Play

Chapter List

Play

Title List

(see “Automatic Chapter“ on page 25).

Notes:

Delete

Changing Title Thumbnails

VR Video

Delete

• If you add, delete or move parts, the start and

end images may be slightly different.

• During playback of a playlist there may be short

pauses between the individual items. This is not

a malfuntion.

Protect

Combine

Edit

Thumbnail

Playlists

Title List-Original

Playlists

Chapter List-Original

Each title displayed in the “Title List“ menu is also

represented by a thumbnail. These can be changed

as you wish.

3. Use ꢁ / ꢂ to select “Playlists“, and press OK.

1. Play a title (original or playlist).

Select a Playlist.

2. Press TITLE

when the desired new picture

appears on the screen. A new thumbnail is then

entered into the “Original“ or “Play-list“ menu.

New Playlist

53 -

32122 DVD Rec_Centros_GB.indb 53

26.04.2005 11:23:55

Download from Www.Somanuals.com. All Manuals Search And Download.

Title and Chapter Editing

4. Select “New Playlist“ and press OK

The new title is shown in the updated playlist

(all chapters within the title are added to the

playlist if you have transferred a title into the

new playlist).

5. Repeat steps 1-4 to add additional titles or

chapters to a playlist.

4. Use ꢃ / ꢀ to select „Yes“ and press OK.

The selected title or chapter is deleted.

After pressing OK the list is updated.

6. Select to quit or DISC-M/

to return

5. Repeat steps 1 - 4 to delete other items.

to the “Title List-Original“ menu.

6. Press

repeatedly to quit the menu.

Deleting a Title/Chapter

Adding Additional Titles/Chapters to a

Playlist

Note:

If you delete a title or chapter from a playlist

on DVD-RW discs in VR mode the entry is only

removed from the playlist. The title and chapter

remain on the disc.

If you delete a title or chapter from the original

list, the title or chapter is actually deleted from

the disc and additional recording time is released.

Titles/chapters deleted from the original lists are

also removed from the playlists.

• With DVD+RW recordings the name of the

deleted title is renamed “Empty Title“.

• If more than two titles are deleted they are

combined into one “Empty Title“.

You can add a title or a chapter from the original

list to a playlist.

1. Press DISC-M/

Original“ menu.

to call up the „Title List-

To ﬁnd out how to call up the „Chapter List-Orig-

inal“ menu, read the „The Chapter List-Original

Menu“ on page 48.

2. Select a title or a chapter from the original lists

for a playlist and press OK.

The options are displayed on the left side of the

screen.

Note: It may not be possible to delete chapters

that are less than ﬁve seconds long.

Play

Title List

Delete

1. In the “Title List“ menu or the “Chapter List“

menu select a title or chapter to delete using ꢁ

ꢂ ꢃ ꢀ and press OK.

Chapter List

Delete

Protect

Edit

The options appear on the left side of the screen.

Combine

2. Select the “Delete“ option.

Playlists

Play

Playlists

Chapter List

Delete

Protect

Edit

3. Use ꢁ / ꢂ to select “Playlists“, and press OK.

Select a Playlist.

New Playlist

Playlists

TITLE 1

3. Press OK to conﬁrm.

The conﬁrm delete message is displayed.

TITLE 2

Delete selected chapter ?

Yes

4. Select an existing playlist to add a title or a

chapter and press OK.

The updated playlist is displayed.

- 54

32122 DVD Rec_Centros_GB.indb 54

26.04.2005 11:23:56

Download from Www.Somanuals.com. All Manuals Search And Download.

Title and Chapter Editing

Deleting a Part

Undoing the Last Deletion

TITLE

20/8 00:35:42

Title edit

Delete Part

You can delete a part from the original list or from

a playlist.

Deletion errors can be undone in the original list

(but not in a playlist!). Only the last deletion (i.e.

only one action) can be undone.

1. Press DISC-M/

once or twice to call up the

“Title List-Original“ or “Title List-Playlists“ menu.

1. Select “Undo“ in the “Title List-Original“ menu

and press OK.

Start Point

End Point

0:00:00.00

2. Use ꢁ ꢂ ꢃ ꢀ to select

• frame-by-frame advance (press

repeatedly),

Cancel

Done

Select

P+ P-

Move Point

Play

Chapter List

Delete

Undo

Protect

Rename

5. Start playback with OK and use

• frame-by-frame advance (press

repeatedly),

Delete Part

• slow motion (

• search (

) and / or

Redo

• skip to next / previous chapter (P+ / P-)

and press OK.

The options are displayed on the left side of

the menu.

• slow motion (

• search (

• skip to next / previous chapter (P+ / P-),

Edit

Playlists

) and / or

to ﬁnd the starting point.

3. Select the “Delete Part“ option in the “Play-lists“

menu or “Edit ➜ Delete Part“ in the “Title List-

Original“ menu.

Notes: You cannot undo anything once the DVD

disc has been removed from the DVD recorder or

the recorder has been switched to standby mode.

You cannot undo a recording.

6. Press OK at the starting point of the section you

want to delete.

The “End Point“ menu item is now highlighted.

The part to be deleted is indicated between the

two markers on the stylized progress bar propor-

tionate to the entire playlist.

Play

Chapter List

Delete

Tip: You can redo the last undo action using

“Redo”. Select “Redo“ from the “Title List-Origi-

nal” menu options and press OK.

7. Search for the end point using

• frame-by-frame advance (press

repeatedly),

Delete

Protect

• slow motion (

• search (

• skip to next / previous chapter (P+ / P-),

Delete Part

Undo

Edit

) and / or

Playlists

Redo

to ﬁnd the starting point.

8. Press OK at the end point of the section you

want to delete.

Menu options for “Title List-Original“

To cancel the deletion, select the “Cancel“ sym-

bol using ꢁ / ꢂ and press OK.

Play

Chapter List

Delete

9. To delete the selected part, select the “Done“

menu item and press OK.

The conﬁrm delete message is displayed.

Rename

10. Use ꢃ / ꢀ to select “Yes“, and press OK.

The selected part is removed from the title and

the “Title List-Original“ menu or “Title List-Playl-

ists“ menu is displayed.

Delete Part

Menu options for “Title List-Playlists”

4. Drücken Sie OK.

The “Edit Title - Delete Part“ menu is displayed

on the screen.

The “Starting Point“ menu item is highlighted.

55 -

32122 DVD Rec_Centros_GB.indb 55

26.04.2005 11:23:57

Download from Www.Somanuals.com. All Manuals Search And Download.

Title and Chapter Editing

Renaming a Title

Combining Two Chapters into One

Moving a Chapter / Playlist

VR Video

Titles can be renamed. The names can be up to 32

characters long.

Use this function to combine two adjacent play-list

chapters or original chapters into one.

Use this function to change the playback order of

the chapters in the “Title List-Playlists“ menu.

1. Use ꢁ ꢂ ꢃ ꢀ to select the title to be re-

named from the “Title List“ menu and press OK.

The options are displayed on the left side of the

menu.

1. In the “Chapter List“ menu select the second of

the two chapters to be combined and press OK.

The options are displayed on the left side of the

menu.

1. Press DISC-M/

List-Playlists“ menu.

To ﬁnd out how to call up the “Chapter List-Play-

lists“ menu, read the “The Chapter List-Playlists

Menu“ on page 49.

twice to call up the „Title

2. Use ꢁ / ꢂ to select “Combine“.

2. Use ꢁ/ꢂ to select the “Rename“ option, and

press OK.

1/12

Title List

Play

Title List

Delete

- Playlists

Play

Chapter List

DVD-RW

Rename

TITLE

7/12

TITLE 2

9/12

TITLE

10/12

1H 5M

0:16:00

0:35:00

0:30:00

Delete Part

Free

Delete

Combine

Undo

Protect

Playlists

Redo

TITLE

13/12

TITLE

0:08:00 16/12

TITLE

0:10:00 19/12

Edit

Playlists

0:15:00

3. Press OK to conﬁrm.

After pressing OK the updated menu is dis-

played.

TE^XTOriginal

END

Select

^INFOInfo

3. Enter a new name for the title. Use ꢁ ꢂ ꢃ ꢀ

to select a character and press OK to conﬁrm

your selection. See step 3 on page 19 (Re-nam-

ing a Station).

2. Select a chapter in the “Chapter List-Playlists“

menu.

Note: This function is not available if there is only

one chapter within the title.

3. Press OK.

The options are displayed on the left side of the

menu.

NAME1

Upper case letter

4. Use ꢁ / ꢂ to select “Move“, and press OK.

Play

Title List

Delete

Combine

Cancel

Space Delete

Move

4. Select the OK button on the last line of the menu

and press OK to conﬁrm the new name and to

return to the initial menu.

5. Use ꢁ ꢂ ꢃ ꢀ to select the position you want

to move the chapter to (move the blue vertical

line) and press OK to conﬁrm the move.

After pressing OK the updated menu is dis-

played.

5. Press

repeatedly to quit the menu.

Note: When recording using DVD-R, DVD+R or

DVD+RW discs, the entered name is only displayed

by the DVD player after ﬁnalization.

Note: This function is not available if there is only

one chapter.

- 56

32122 DVD Rec_Centros_GB.indb 56

26.04.2005 11:23:59

Download from Www.Somanuals.com. All Manuals Search And Download.

Title and Chapter Editing

Note: A title that has already been hidden can be

“shown“ again using the option “Edit ➜ Show“

(i.e. the hiding is undone).

correct the division point, select the “Cancel“

function. Now you can set a new division point

or cancel the whole division process by using the

“Cancel“ function again and return to the “Title

List“ menu.

Protecting a Title

This function prevents inadvertent overwriting,

editing or deleting of a title.

Dividing One Title into Two Titles

1. Press DISC-M/

for the “Title List“ menu.

6. To complete the division, select “Done” and

press OK to conﬁrm the division.

The title is divided into two new titles. This proc-

ess can take up to 4 minutes.

Video +RW

Use this function to divide one title onto two new

titles.

2. Use ꢁ ꢂ ꢃ ꢀ to select a title to lock and

press OK.

The options appear on the left side of the screen.

1. Use ꢁ ꢂ ꢃ ꢀ to select the title to be divided

from the “Title List“ menu and press OK.

The menu options are displayed on the left side

of the screen.

3. Select “Protect“ from the options.

Play

Play all

Chapter List

Delete

2. Select the “Edit ➜ Divide“ option.

Play

Protect

Edit

Play all

Chapter List

Delete

Rename

Divide

Hide

4. Press OK to conﬁrm.

The „Protect Symbol“ (lock) appears in the

thumbnail of the protected title.

Protect

Edit

Note: A protected title can also be unprotected us-

ing this procedure. The title can then be overwrit-

ten, edited or deleted again.

3. Press OK to conﬁrm.

The “Edit Title - Divide“ menu appears and the

ﬁlm is stopped.

Hiding a Title/Chapter

Current picture

Video +RW +R

Use this function to hide a title/chapter in the “Title

List“ menu or the “Chapter List“ menu.

TITLE

Edit Title

Divide

20/8 00:35:42

Thumbnail

of the ﬁrst title

Preview

1. In the “Title List“ menu or the “Chapter List“

menu select a title or chapter to hide using

ꢁ ꢂ ꢃ ꢀ and press OK.

Thumbnail

of the second

title

Divide

Cancel

Done

0:00:00.00

]

Move Cursor

Select

[

P+ P-

2. The options appear on the left side of the screen.

4. Start playback and search for the point at which

you want to divide the title using

• frame-by-frame advance (press

repeatedly),

3. Select the option “Edit ➜ Hide“.

Play

Play all

Chapter List

Rename

• slow motion (

• search (

Divide

) and / or

Delete

Hide

• skip to next / previous chapter (P+ / P-),

to ﬁnd the starting point.

Protect

Edit

5. Press OK at the starting point for the second

title.

The division point is shown in thumbnail #2. To

4. Press OK to conﬁrm.

The thumbnail of the title to be hidden now

appears dimmed.

57 -

32122 DVD Rec_Centros_GB.indb 57

26.04.2005 11:24:00

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information

The new title is created and the updated menu

is displayed.

Note: The „Title List“ menu can by hidden by

pressing

Deleting a Disc and Starting New

Recording

Video VR

Notes:

Playing your Recordings on other DVD

Players

RW discs have the simple option of deleting every-

thing on the disc and automatically starting a new

recording at the touch of a button. The disc format

remains unchanged.

• This function does not work with protected titles.

• If the new title is longer than the one to be over-

written, the next title will also be overwritten. If

however the next title is protected, the recording

will be stopped at the end of the ﬁrst title to be

overwritten.

• If the recording length of the selected title is less

than 10 seconds, the next title will be overwrit-

ten. However, if the next title is protected the

recording will be stopped.

Finalized Video, DVD+R or DVD+RW discs can be

played on most DVD players.

A few DVD players can also play prerecorded

ﬁnalized and unﬁnalized DVD-RW discs in VR

mode. Supported discs are listed in the manual

for each player. Finalizing „ﬁxes“ the recordings

so that the discs can be played on normal DVD

players or computers with DVD-ROM drives. During

ﬁnalization of a disc in Video mode a disc menu is

created for navigating the disc. This is accessed by

1. Switch the recorder on and insert a writable disc.

2. Hold the

seconds.

key down for more than 3

The following message appears on the screen.

Delete all titles and record ?

Yes

Viewing Title Lists Created on another

DVD Recorder

3. Use ꢃ / ꢀ to select “Yes“, and press OK.

Recording begins. (The REC indicator lights up in

the display window.)

pressing the DISC-M/

key.

Video +R +RW

Title list menus for DVD+RW or DVD+R discs cre-

ated on other DVD recorders can also be displayed

on this recorder.

Note: Unﬁnalized DVD+RW discs can be played on

normal DVD players provided that their recordings

have not been edited at a later date.

Overwriting a Recording

Video +RW

Follow these steps to overwrite an existing title

with a new recording (this is not possible with a

DVD+R disc, here new recordings are added after

the existing ones):

1. Insert a prerecorded DVD+R or DVD+RW disc.

2. Hold down the DISC-M/

mode for three seconds.

button in stop

The “Title List“ menu appears as below.

1. Select the signal source you want to record (TV

program, AV1-4, DV).

DVD+RW

Title List

2. Press DISC-M/

for the “Title List“ menu.

TITLE

7/12

TITLE

0:16:00 9/12

TITLE

0:35:00 10/12

0:30:00

1/12

Title List

TITLE

13/12

TITLE

16/12

TITLE

19/12

TITLE

7/12

TITLE 2

9/12

TITLE 3

10/12

0:08:00

0:10:00

1/2

0:15:00

SQ 1H 5M

0:16:00

0:35:00

0:30:00

Free

3. To play a title select the title and press OK or

TITLE

13/12

TITLE

0:08:00 16/12

TITLE

0:10:00 19/12

0:15:00

INFO

Info

REC

END

Select

3. Use ꢁ ꢂ ꢃ ꢀ to select a title to be overwrit-

ten.

4. Press

to start the recording.

The new recording begins at the starting point of

the title that is being overwritten.

5. To stop the recording press

- 58

32122 DVD Rec_Centros_GB.indb 58

26.04.2005 11:24:01

Download from Www.Somanuals.com. All Manuals Search And Download.

What to do, if ...

Problem

No power

No image

Possible cause

Remedy

The mains cable is not plugged in..

Fix the mains cable firmly into a socket.

The television is not switched to receive signals

from the DVD recorder.

Select the right video input mode on the television, so that

the image from the DVD recorder appears on the television

screen.

The SCART cable is not properly connected.

The television that is connected is switched off.

Connect the SCART cable properly.

Switch the television on.

No sound

The connected audio equipment is not switched to Set the audio receiver so that you can hear the sound playing

DVD playback.

on your DVD recorder.

The audio cables are not properly connected.

The connected audio equipment is switched off.

The audio connection cable is faulty.

The disc is dirty.

Connect the audio cable properly.

Switch on the audio equipment that is connected.

Change it.

Inferior picture quality.

Playback not possible.

Clean the disc.

There is no disc.

Insert a disc. (Check that the disc display comes on in the

display window.)

A non-playable disc has been inserted.

Insert a writable disc. (Check the disc type, the colour system

and the region code.)

The disc has not been inserted with the playable

side downwards.

Insert the disc with the playable side downwards.

The disc has not been properly placed in the guide. Position the disc properly into the guide in the disc drawer.

The disc is dirty.

Clean the disc.

A security rating has been set.

Cancel the security rating or change the protection.

There is interference with images from an

external source.

The video signal from the external component is

copy-protected.

You cannot get a connection from this recorder. Connect the

component directly into the television.

A channel is skipped when using P+ / P-.

The channels have not been saved in the recorder.

Retune the channels. See channel tuning on pages 18-19.

Tighten the connections or change the cable.

The image or sound on the transmission chan- Loose antenna or cable.

nel is weak or absent.

The camcorder image is not displaying.

The camcorder is switched off.

Switch the camcorder and make sure your are using it

properly.

The camcorder image is not appearing on the The DVD recorder AV selection is wrong.

television screen when using the A/V input or

Select the input channel (AV1, AV2, DV etc.) with DVD-AV.

DV IN to the DVD recorder.

A disc that was recorded to from this DVD

recorder cannot be played on a different DVD

player.

The disc was recorded in video mode.

Finalising the disc (see page 26)

59 -

32122 DVD Rec_Centros_GB.indb 59

26.04.2005 11:24:02

Download from Www.Somanuals.com. All Manuals Search And Download.

What to do, if ...

Problem

Possible cause

Remedy

Some players do not play discs with ﬁnalisation in

video mode.

No solution.

The disc was recorded in VR mode.

The other player must be RW-compatible

No solution.

The ability of CD-R / RWs (MP3, JPEG, VCD, SVCD)

and DVD+R / RWs and DVD-R / RWs is inﬂuenced

by the recording equipment, recording methods

and data media. Therefore, there may be problems

occasionally when playing on conventional DVD

players..

Playback not possible or unsuccessful.

Timer recording not possible.

There is insufﬁcient space on the disc.

Use a different disc

The source that you want to record is copy-pro-

tected.

You cannot record the source

Copy-protected broadcasts cannot be recorded on a Use a disc formatted in the VR mode for once copiable

video mode disc.

material

The time has not been set correctly on the DVD

recorder.

Set the correct time. See “Setting the time automatically“ or

“Setting the time manually“ on page 20.

The timer was wrongly programmed.

Re-program the timer. See “Timer recording“ on page 44

The time between programming the timer and the

start of recording is too short.

The recording‘s start time must be at least 3 minutes into the

future.

After programming, the timer recording LED is no

longer displayed.

Re-program the timer.

Stereo-audio recording and/or playback

unavailable.

The television is not stereo-compatible or the

broadcast transmission is not in stereo format.

No solution.

The DVD recorder’s A/V Out sockets are not con-

nected to the TV’s A/V In sockets.

Make the A/V connections.

The DVD recorder’s audio/video Out has not been

selected for the television.

Select the AUX or A/V source as the TV input.

Set the TV’s audio channel to stereo. (see page 43)

Replace the old batteries with new ones.

The DVD recorder’s TV audio channel must be set

to Mono.

The remote control is not working properly.

The remote control’s batteries have run out.

- 60

32122 DVD Rec_Centros_GB.indb 60

26.04.2005 11:24:02

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Speciﬁcations

Inputs

General

AERIAL IN

VIDEO IN

Aerial input, 75 ohms

Centros 1102

Centros 1172

Power supply

Power consumption

Item No. 64501

Item No. 64511

1.0 Vp-p 75 ohms, negative sync. ,

RCA socket x 2 / SCART x 2

0 dBm over 47 kohms, RCA socket

(L, R) x 2 / SCART x 2

4 pins (i.LINK/IEEE 1394-Standard)

3 in 1: SD, MMC, Memorystick

AC 110-240V, 50/60 Hz

During operation: 35 W

In standby mode: 5 W

430 X 75 X 325 mm (W x H x D)

5.5 kg

AUDIO IN

DV IN

Cardreader

Dimensions (approx.)

Weight (approx.)

Operating temperature

Humidity

5 °C to 35 °C

5 % to 90 %

Outputs

TV system

Centros 1102: PAL B/G, PAL I, Secam DK

Centros 1172: PAL B/G, Secam L

PAL

VIDEO OUT

1 Vp-p 75 &, negative sync. ,

RCA socket x 1/ SCART

(Y) 1.0 V (p-p), 75 ohms, negative sync.,

Mini DIN 4-pin x 1

Recording format

S-VIDEO OUT

Recording

COMPONENT VIDEO OUT

(Y) 1,0 V (p-p), 75 ohms, negative sync.,

RCA socket x 1 (Pb)/(Pr) 0.7 V (p-p), 75 ohms,

RCA socket x 2

0.5 V (p-p), 75 ohms, RCA socket x 1

optical connection x 1 (TOS-Link)

2,0 Vrms (1 kHz, 0 dB), 600 ohms,

RCA socket (L, R) x 1 / SCART

Recording format

Writable discs

DVD Video-Recording, DVD-VIDEO

DVD-ReWritable, DVD-Recordable,

DVD+ReWritable, DVD+Recordable

Approx. 1 hour (HQ mode), 2 hours

(SQ mode), 4 hours (LQ mode),

6 hours (EQ mode)

Audio output (digital audio)

Audio output (optical audio)

Audio output (analog audio)

Writable time

Video recording format

Sampling frequency

27MHz

• Design and technical speciﬁcations are subject to change without notice.

• Manufactured under license from Dolby Laboratories. Dolby, ProLogic and the

double-D symbol are trademarks of Dolby Laboratories.

Compression format

Audio recording format

Sampling frequency

MPEG 2

48kHz

Dolby Digital

• “DTS“ and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Compression format

Playback

Frequency response

DVD (PCM 48 kHz): 8 Hz to 22 kHz,

CD: 8 Hz to 20 kHz

DVD (PCM 96 kHz): 8 Hz to 44 kHz

Over 100 dB (AUDIO OUT connection)

Less than 0.008%

Signal-to-noise ratio

Harmonic distortion

(AUDIO OUT connection)

Dynamic range

Over 95 dB (AUDIO OUT connection)

61 -

32122 DVD Rec_Centros_GB.indb 61

26.04.2005 11:24:02

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating additional devices with RC3

Using other Loewe devices with the

RC3 remote control

Setting the remote to control devices

made by other manufacturers

Using the remote‘s suggestions to set

up remote control

You can use other Loewe devices with this remote

control.

You can set the remote to work with other

video recorders, DVD players or set-top boxes if

the infra-red code of the device type appears in the

code list or if it is held in the RC3‘s code memory.

Even if the device‘s manufacturer appears in

the code list, it could be that the device cannot be

controlled.

Switch on the device which you want to convert

the remote control to. Note that Standby is inad-

equate!

Use the rotary switch to select

DVD

STB

VCR, TV or a set-top box.

Use the rotary switch to select

whether you want to switch to

using a VCR, DVD device or a

VCR

Loewe video recorders, Loewe tel-

evision sets and the d-box which

is commonly used in Germany as a

set-top box.

DVD

VCR

STB

set-top box are set up ex-factory.

^{Press the END and}* EPG but-

tons simultaneously for at least

5 seconds. The display in the top

left of the remote control will

ﬂash twice.

Using a code input to set the remote

Using the drive buttons in the TV and

STB position for a VCR, DVD or digital

recorder

Look for the code number for your device in the

code list (see from page 63). The list is sorted

according to device type – DVD, VCR, STB – and

alphabetically by manufacturer. You will ﬁnd one

or more code numbers next to the manufacturer

name.

EPG

Key in, one by one, the ﬁgures

991. The display will ﬂash once

after each ﬁgure is input.

Press the # PIP button to select

the ﬁrst code.

With both the TV and the STB, you can switch over

the six drive buttons (

wxyz

) so that they control a

VCR or DVD player/recorder (ex-factory it is set to

control the built-in “Digital Recorder Plus“):

Use the rotary switch to select

whether you want to switch to

Point the remote at the device

which you want to convert it to

control. Watch the device.

Now press theꢀ (Play) or

On/Off buttons on the remote

control.

Wait a moment for the device to

react. If the device fails to react,

this is not the right code. Press

the # PIP button again to get the

next code.

First set the switch to the main TV

or STB function.

using a VCR, DVD device or a

set-top box.

DVD

VCR

STB

PIP

DVD

VCR

STB

^{Then press the END and}* EPG

buttons simultaneously for at

least 5 seconds. The display in

the top left of the remote control

will ﬂash twice.

Key in the ﬁgures 988. The dis-

play will ﬂash twice more.

Now set the switch to the func-

tion that you require for the drive

buttons:

to DVD or VCR, or TV if the digital

recorder is to be used.

Press the # PIP button to ﬁnalise

the setting. The display will ﬂash

another two times.

^{Press the END and}* EPG but-

tons simultaneously for at least

5 seconds. The display in the top

left of the remote control will

ﬂash twice.

Key in, one at a time, the four

ﬁgures that you have found in the

code list (e.g. 0539 for the Loewe

DVD player).

EPG

wxyz

tuv

jkl

tuv

def

PIP

Press the ꢀ (Play) or On/Off

buttons again.

After each ﬁgure that you key in,

the display will ﬂash once, and

after the last ﬁgure it will ﬂash

wxyz

DVD

VCR

STB

If the device reacts, press the

* EPG button to copy over the

code.

twice. If the ﬁgure was wrong, the display will stay

illuminated for longer. This means that the code

number has not been accepted. If a double-ﬂash

signiﬁes that the code has been accepted, you can

test the functionality of the device that you have

programmed.

EPG

PIP

If you are unable to control the device, or have

difﬁculty in controlling it properly, repeat the code

input with the next code in the list. If there are no

other codes listed for the manufacturer in question,

try using the remote control‘s suggestions.

- 62

32122 DVD Rec_Centros_GB.indb 62

26.04.2005 11:24:03

Download from Www.Somanuals.com. All Manuals Search And Download.

RC3 code list

Loewe

Conia

Crown

0672

0770 0651 0690

0831

0714 0816

0716 0651 0705

0770 0705 0714

0699

Hiteker

Home Electronics

Hyundai

Ingelen

ISP

0672

0730

0783

0788

0695

0699

0695

Neufunk

Nordmende

Omni

Onkyo

Optimus

Orava

Orion

Oritron

P&B

0665

0831

0690 0699

0627 0503

Cybercom

CyberHome

Cytron

Daewoo

Daewoo International

Dansai

Dantax

DEC

Decca

Denon

DVD player

DVD recorder

STB

0539

0741

1127

0866

0571

0818

0695

0651

Jeken

VCR

JMB

JVC

0770 0783

0723

0699 0818

0770

0490 0634

0699 0788

0665

0623 0539 0503 1901 1940

The following video recorders may be

Karcher

Kendo

Kenwood

Kiiro

Kingavon

Kiss

0783

0699

0534 0490 0737

0818

controlled: ViewVision 8106H, 8136H,

8176H, 6306H, 6336H, 6376H, 6396H,

4306H, 4376H, 2102M, 2302M, 4206,

4236, 4276.

Paciﬁc

0768 0790 0713 0831

Palladium

Palsonic

Panasonic

Panda

0695

0689 0672

0490 1908

0718 0770

Denver

Denzel

0818

0665

0783

If using devices other than the listed

Loewe units, please use the original

remote control or the video menu bar.

Diamond

Digihome

digiRED

Digitrex

DiK

Dinamic

DiViDo

DK digital

DMTECH

Dragon

0651 0768 0723

0713

Koda

Koss

Lawson

Lecson

Lenco

Lenoxx

Lexia

Lifetec

Limit

Loewe

LogicLab

Logix

Lumatron

Luxman

Luxor

Magnavox

Magnex

Manhattan

Marantz

Mark

Matsui

MBO

0818

0651

0705 0716 0768

Philips

0539 0646 0503 1914

Phonotrend

Pioneer

Pointer

Powerpoint

Proline

Proscan

Prosonic

Provision

Radionette

Raite

Rank Arena

RCA

REC

Red Star

Reoc

Revoy

Roadstar 0699 0690 0689 0713 0818

Rotel

Rowa

Saba

Sabaki

Salora

Samsung

Sansui

Sanyo

Scan

ScanMagic

Schaub Lorenz

Schneider 0651 0783 0705 0790 0788

Scientiﬁc Labs

Scott

SEG

Shanghai

Sharp

Sherwood

Shinco

Silva

SilvaSchneider

Singer

Skymaster

Slim Art

SM Electronic

0699

0717

0672

0831

0788

0705

0831

0571 0631 1900 1902

0696

0770

0718

0699 0651 0770 0818

0690

DVD

0651 0672 0790 1004

0699

0591 0741 1906

0651

0522

0699

0741

0665

3DLAB

A-Trend

Acoustic Solutions

AEG

Aiwa

0539

0714

0730

0783 0790

0831

0665 0651 0713 0730

0716 0768

0539 1922

0768

0705 0783

0705

0573

1004

0503 0818

0723

Dual

0788 0770

0641 0695

0783 0790 0831

0718

E-Boda

Eclipse

Electrohome

Elin

Elta

Emerson

Enzer

Ferguson

Finlux

Firstline

Funai

Global Solutions

Global Sphere

Go Video

GoldStar

Goodmans

0723

0770

0522 0651

0689 0490

0770 0788

0768

Akai 0790 0788 0690 0716 0713 0705

AKI

Akira

0718

0699

Alba

All-Tel

Amitech

Amstrad

Apex Digital

Audiosonic

AWA

0717 0699 0713 0723 0695

0690 0770 0788 0790

0699

0790

0770

0713

0672

0690

0730

0591 0705

0665

0651

0741 0770 0783

0705

0539

0713

0623

1004

0651

0768

0651

0695

0717

0768

0651 0695

0690 0730

0699

0741

0573 0490

0695 0716 0768 0723 0770

0670 0695 0790

0705

Black Diamond

Blaupunkt

0713

0717

MDS

Medion

Memorex

Metz

0651 0783 0716 0831

0831

Blue Sky 0699 0695 0713 0672 0651

Boman

Brain Wave

Brandt

0783

0770

0651 0551

0783

0571 0713

0723

0718

0695

0503 0539

0539

0591 0741

MiCO

0730

0788 0770

0651 1004 0790 0690

0783 0723 0818

0665

Microboss

Micromaxx

Micromedia

Micromega

Microsoft

Microstar

Minax

Minoka

Mitsubishi

Mizuda

Monyka

Mustek

Mx Onda

NAD

Bush

0699 0690 0689 0717

0713 0818 0695 0831 0723

0768

Graetz

Grandin

Grundig

0768

0718 0651 0672

0665 0713 0768

0672

0630 0695

0717 0741 0633

0717

0788

0831

0690 0716 0723

0730 0768

0770

C-Tech

0716

Cambridge Audio

Cambridge Soundworks

CAT

0696

0699

0539 0695 0651 0775

0705 0790 0713 0670 0723

0522

0831

0713

0770

0713

0818

0665

0730

Grunkel

H&B

Haaz

Hanseatic

HCM

HDT

Henß

Hitachi

0770

0818 0713

0768

Celestial

0672

Centrex

Centrum

0672 1004

0713

0741

0788

0705

0730

cineULTRA

Classic

Clatronic

0699

0730

0788

0651 0723

0741

Clayton

Coby

0713

0730

0713

0664 0665 0573

Naiko

0770

0730 0768 0690

63 -

32122 DVD Rec_Centros_GB.indb 63

26.04.2005 11:24:04

Download from Www.Somanuals.com. All Manuals Search And Download.

RC3 code list

Smart

Sonashi

Sony

0718 0705 0713

0348 0081

Etzuko

Fast

Ferguson

Fidelity

0072

0897

JVC

Kaisui

Kambrook

Karcher

Kendo

0041 0067 0384

0716

Allorgan

Allstar

Amstrad

Anitech

Ansonic

Aristona

ASA

Asuka

Audiosonic

AVP

AWA

Baird

Basic Line

Bestar

Black Diamond

Black Panther

Blaupunkt

0240

0081

0000 0278 0072

0072

0037

0278

0533 0573 1903 1904

0041 0320 0000 0278

0000 0072 0240

Soundmaster

Soundmax

Soundwave

Standard

Starmedia

Sunwood

Supervision

SVA

0768

0783

0072

0000

0081

Finlandia 0104 0081 0042 0000 0048

0384

Finlux

Firstline 0072 0209 0348 0043 0037

0045 0042 0278

Fisher

Flint

Frontech

Fujitsu

Funai

Galaxi

Galaxis

GEC

General Technic

Genexxa

Goldhand

GoldStar

Goodmans

0106 0209 0315 0348 0072

0037

0041 0038

0651 0768

0818

0788

0730 0768

0672

0000 0081 0104 0042

Kenwood

KIC

Kimari

Kneissel

Kolster

Korpel

Kuba

Kuba Electronic

Kuwa

Kyoto

Lenco

Leyco

Lifetec

0037 0081

0072 0037 0081 0000 0038

0278

0000

0047

0352 0209 0348 0037

0209 0348

0047 0104 0038

0209

0072

0000

0278

0320

0081

0352 0000

Synn

Tandberg

Tatung

0768

0713

0770

0037 0278 0642 0043

0106 0278 0104 0041 0000

0278 0209 0072

0278

0072

0047

0226

0072

0278

0072

Teac

0717 0741 0571 0768 0591

0790

0490 1908

0770

0713

0690 0651

0651 0768

0571

0551 0522

0665 0788

0705 0716

0503

0642 0278

0278

1562 0226 0081

0037 0209 0348 0072

0352 0278 0000

0072

Technics

Technika

Techwood

Tensai

0348

0104

0072

Blue Sky

0037 0000 0278

0209 0348

0081 1562 0226 0866 0037

0240 0072 0106 0209

0278

0106 0043 0072 0104 0047

0048

Tevion

Bondstec

Brandt

Brandt Electronique

Brinkmann

Loewe

Logik

Lumatron

Luxor

Theta Digital

Thomson

Tokai

Tokiwa

Toshiba

Umax

0037 0000

0000 0072 0240 0278

0041 0320

0041

0209 0348

0037 0081 0348 0209 0352 0642

Graetz

0041 0104 0240

Granada 0104 0048 0081 0240 0037

0226 0042 0000

Bush0072 0278 0315 0209 0352 0000

0348 0081

Magnavox

Manesth

Marantz

Mark

0081

0690

Carena

Carrefour

Casio

Cathay

CGE

Cimline

Clatronic

Combitech

Condor

Crown

0209 0081

0045

0072 0045 0081 0209

0081 0038 0209

0278

United

0788 0730 0790

0741 0713 0591

0790

Grandin 0072 0037 0000 0278 0209

Grundig 0081 0347 0226 0320 0348

0072

Haaz

Hanimex

Hanseatic 0037 0209 0278 0081 0038

Harwood

HCM

Universum

Venturer

Vieta

Voxson

Walkvision

Welkin

Wesder

Wharfedale

Windy Sam

XBox

XLogic

XMS

Yamada

Yamaha

Yamakawa

Yelo

0000

0278

0041 0000

0072 0209

0072 0000

0352

0278

0278 0072

0081

Matsui

0209 0348 0037 0240 0352

0000

0705

0730 0831

0717

0831

0699

0696 0723

0573

0348 0209

0352

Mediator

Medion

Melectronic

Memorex 0104 0000 0037 0048 0047

Memphis

Metz

Micormay

Micromaxx

Migros

Mitsubishi

Multitec

Multitech

Murphy

Myryad

NAD

National

NEC

Neckermann

Nesco

0081

0209 0348 0352

0000 0037 0038

0072

0072 0209 0352 0041 0278

0240

Hinari

0072

Cyrus

1562 0347 0081 0226 0037

0522

Hisawa

Hischito

Hitachi

0209 0352

Daewoo 0278 0642 0209 0348 0352

0045

0348

0209

0000

0770 0768

0788 0689

1004

0045

0042 0041 0000 0240 0081

0104 0384

Dansai

Daytron

de Graaf

Decca

0209

Deitron

Denko

Diamant

Domland

Dual

Dumont

Elbe

Elcatech

Elin

0072 0278

0278

0042 0081 0104 0048

0000 0041 0081 0067 0348

0043 0067 0081

0037

0000 0072 0104

0490 0539 0646

0665 0710 0765

0718

0730

0503 0591 0741

Hornyphone

Hypson

0081

0072 0209 0278 0352

0000 0240

Imperial

Ingersoll

Inno Hit

Interbuy

Interfunk

Internal

0000

0081

0104

Yukai

Zenith

0278

0072

0037

0209 0240

0240 0278 0072

0037 0072

1562 0226

0041 0038 0067 0104 0037

VCR

0209

0081 0104

0278

0278 0037

0041 0081 0278 0000

0000 0081 0104

0278 0038

0072

0041 0081

0072 0000 0352

0209

Adyson

0072

International

Intervision 0000 0278 0037 0209 0348

Irradio

ITT

ITT Nokia

ITV

Aiwa0307 0000 0209 0348 0352 0037

0041

Akai

Akashi

Akiba

Akura

Neufunk

Nikkai

Nokia

0072 0037 0081

0106 0041 0384 0104 0240

0072 0278

0106 0315 0041 0352 0240

0240

0072

0072 0278

0072 0045 0000

0278 0240

0104 0106 0315 0041 0278

0240 0048 0042 0081

0041 0384 0320 0067

0209 0348

0072

0072 0041

Elsay

Elta

Emerson

ESC

0048

0278 0037

0209 0352

0000

Nordmende

NU-TEC

Oceanic 0000 0048 0106 0081 0104

JMB

Joyce

Alba0278 0072 0209 0352 0000 0315

- 64

32122 DVD Rec_Centros_GB.indb 64

26.04.2005 11:24:05

Download from Www.Somanuals.com. All Manuals Search And Download.

RC3 code list

0041

Okano

Orbit

Orion

Orson

Osaki

Osume

Otake

Seleco

Sentra

Setron

Sharp

Shintom

Shivaki

0041 0384 0037

0072

Ultravox

Unitech

United Quick Star

Universum

0278

0240

Blaupunkt

Blue Sky

Boca

Boston

Broco

BskyB

0173

0713 0885

0132 0713

0132 0710 0668

0713

0315 0209 0348 0072 0278

0072

0209 0352 0348

0000

0000 0037 0072

0072

0278

0000 0081 0240 0037

0106 0348 0209 0104

0067

0081 0352 0278 0642

0037

0048 0037 0569

0072 0104

0037

Victor

0847 1175

0668 0710

0713

Siemens 0037 0104 0081 0320 0347

Siera

Silva

Silver

Watson

Weltblick

Yamaha

Yamishi

Yokan

Yoko

0209

0081

0037

0278

0045

Bubu Sat

Cambridge

Canal Satellite

Canal+

Cherokee

Chess

CityCom

Clemens Kamphus

Cobra

Colombia

Columbia

Columbus

Comag

Condor

Connexions

Conrad

Conrad Electronic

Cryptovision

Cyrus

Otto Versand

Palladium 0072 0315 0037 0041 0209

0240 0348 0432

Palsonic

Panasonic

Pathe Cinema

Pathe Marconi

Perdio

0041

0072 0278

0072

0037 0072 0240

0209

0501

0853

Singer

0072 0000

1562 0226

0043

Sinudyne

Smaragd

Sonitron

Sonneclair

Sonoko

Sonolor

Sontec

0081 0209

0123 0710 1323

0157 0605 0713 1085

1176 0115 0607 0299

0834 0396

0396

0348

0047

0072

0278

0041

0000 0209

0038 0072

0081 0384

0278

SAT /STB)

Philco

Philips

0048

0668 0132

0132

0037 0278

0032 0106

0037 0209 0348

@sat

ABsat

ADB

Adcom

AGS

Akai

Akena

Alba

Allsat

Alltech

Alpha

Altai

1300

0668 0123 1323 0710

0642

Phoenix

Phonola

Pioneer

Portland

Prinz

Proﬁtronic

Proline

Prosco

Prosonic

Protech

Provision

Pye

Quasar

Quelle

Radialva

Radiola

Rank

Reoc

Rex

RFT

Roadstar

Royal

Saba

Saisho

Sony

0668

0132

0607

0396

0081

0067 0081 0042

0278

Soundwave

Ssangyong

Standard

Starlite

Stern

0072

0278

0037 0104

0200

0668 0710

0200

0000

0607 0573 0115 0501

0607 0713

0455 0795

0200

0081 0240

0000 0320

0278

0209 0348 0278

0000

0668

Sunkai

0455 0713

0200 1017 1043

0713

Sunstar

Suntronic

Sunwood

Supra

Symphonic

T+A

0209 0278 0000

0081

0000

0072

0037 0240

0000 0072

D-box

1127 1114 0723

0396

Daeryung

Daewoo

Delfa

Deltasat

DGTEC

Digatron

Digenius

Digiality

Digipro

DigiQuest

Diskoverer

Diskovery

Diseqc

0668 0200

0396

0713

0396 0132

0278

0081

0278

0081

1296 0713

0863

Amitronica

Ampere

Amstrad 0847 0713 0742 0396 0132

0882 0885 0863 0501 0795 1113

Anglo

Ankaro

AntSat

Apollo

Arcon

Armstrong

Asat

0226

0209

0278

1075

1242

1294

0299

0607

1105

0863

Taisho

0037 0072 0081 0048

0081

Tandberg

Tashiko

Tatung

0000 0048 0240 0081 0037

0000 0041 0081 0048 0043

0209 0348 0352

0072 0041 0000 0278 0642

0037 0081 0307

0278 0072

0713

1017 1083

0041

0209 0348 0278

0041 0384

0072

Teac

0455

0605 0157

0668 0710

0710

1205 1043 0834 0132 1075

0240 0072 0037 0278

0072

0041 0320 0384 0278

0209 0348

0043 0106 0104

0240 0432

TEC

0200

0713

0853

Tech Line

TechniSat

Teleavia

Telefunken

Teletech

Tenosal

Tensai

0072

0348 0209

Distratel

Distrisat

DMT

0084 0885 1205

0200

ASLF

0041

AssCom

Astacom

Aston

Astra

Astro

Salora

Samsung

Sansui

Sanyo

Saville

SBR

0041 0320 0384 0278

0072 0278 0000

0072

1075

0200 0396

1237

0642 0879

0668 0710

1129

0607 0713

DNT

0041 0067 0106 0072 0348

0104 0047 0048 0067

0352 0278 0240

0081

DREAM multimedia.TV

DStv

0000 0037 0072

0348 0209

0133 0173 0501 0658 0607

Tevion

1113 1099 1100 0200

Thomson 0320 0041 0067 0384 0278

Thorn

Thorn-Ferguson

Tokai

Tokiwa

Echostar 0610 1169 0871 0167 0853

1086 1200 0454 0396 0713

0668 0511 0453

Einhell

Elap

Elsat

Elta

Emme Esse

Engel

EP Sat

Athena

Atlanta

Aurora

Austar

Avalon

Axiel

Axis

Beko

Bentley Walker

0668

0871

0879

Scan Sonic

Schaub Lorenz 0041 0104 0000 0106

0315

Schneider 0072 0000 0037 0081 0278

0240 0042 0897

Seaway

SEG

0240

0041 0104 0037

0320

0072 0037 0041 0104

0132 0713 0501

0713 1129 0668 0710

0863 0642 0497 0879 1176

0072

0348

0396

0668 0710

1111 0834

0455

Topline

0713

0200

0871

0278

0072 0240 0278 0642 0081

0081

Toshiba 0045 0041 0384 0043 0081

Towada

Tredex

Uher

0072

0278

0037 0240

SEI

1017 0713

0455

1017

Sei-Sinudyne

0081

65 -

32122 DVD Rec_Centros_GB.indb 65

26.04.2005 11:24:05

Download from Www.Somanuals.com. All Manuals Search And Download.

RC3 code list

Eurieult

Eurocrypt

Europa

Europhon

Eurosky

0084 0885 0882

0455

0863 0607 0501 0200

0299 0607

0607 0132 0299 0115

0114 0501

0607 0115

0668 0157 0605 0713

0455

International

Interstar

Intervision

Invideo

IRTE

Italtel

ITT Nokia

JOK

JVC

K-SAT

Kamm

Kaon

0132

1105 1017

0628 0607

Minerva

Mitsubishi

Morgan’s

Motorola

Multichoice

Multitec

Myryad

Mysat

Netgem

Neuhaus

Neusat

Nikko

Nokia

0571

0455

0200 0713 0132

Radix

RFT

Roadstar

Rover

Saba

Sabre

Sagem

0396 1113 0882

0200

0713

0628 0713

0710 0885 0115 0607

0455

0871

0609

0871

0856

0642 0879

0157

0200

0713

1322

Eurostar

Fenner

Ferguson

Fidelity

Finlandia

Finlux

Flair Mate

Force

0573 0455 0723

0820 1114 1253

0710

0571

0713

1300

Samsung 0863 1243 1343 0853 1206

1017 1293 1292

SAT

Sat Control

Sat Partner

Sat Team

Satcom

Satec

Satline

Satstation

Schneider

Schwaiger

0501

0455

0573 0455

0501 0713 0834 0607

0501

1300

0501

0713 0834

0713 0723 0200

1023 1114 0751 1127 0723

0853 0573 1223 0455 1723

0713

1101

KaTelco

Kathrein

1111

0713

0658 0249 1057 0173

1221 0200 0713 0668 0742

0123 0115 1323 0710

0605 0607

0713 0834

Fortec Star

Foxtel

1017 1083

0879 0720 0455 0497

0795 1176

1310 1312

0455

Nordmende

Nova

OctalTV

Okano

OnDigital 0751 0329 0241 0867 0133

Optex

Optus

0628

1083

Kathrein Eurostar

Kiton

Klap

Konig

Koscom

Kreiling

Kreiselmeyer

Kyostar

L&S Electronic

Labgear

0115

0114

0668 0710

0607

0879

1294

0668

Fracarro

Freecom

Freesat

FTEmaximal

Fuba

Fugionkyo

Galaxis

0853 0115 0879

Garnet

GF Star

GOD Digital

Goldbox

Goldvision

Gooding

Goodmans

Gradiente

Granada

Grandin

Grundig 0173 0847 1150 1291 1435

0571 0750 0879 0885 0853 0501

1297 1330

Hanseatic

Hänsel & Gretel

Hauppauge

HDT

Heliocom

Helium

0871 0668

0501 0173

0882

0713 0863

0710 0668 0157 1206

0605 0157 0607 0885

1111 0132 1075

0115 0299

0834 1043

0658 0249 0114

0173

0834

0879 0853

SCS

Seemann

SEG

Seleco

Septimo

Siemens

Skantin

Skinsat

SKR

0396 0173 0573 0115 0299

1105

1111 1101 0834 0863 1176

0396

Orbitech 1099 1100 0200 0501 0157

0605 0742 0114 1087

0871

0132

1043

1296

Origo

Ouralis

Oxford

Pace

0497

1205

0668

1205 0885

1075

0834 1043

1043

0173

0713

0501

0713

LaSAT

Lenco

Lenson

Lexus

0607 0115 0132 0157 0299

0455 0847 0887 1175 0241

0867 0123 1323 0791 0795

0713 0115 0607

0200

0853

1017

0571

0501

0200

1075

0720 0497 0200 0853 0710 1423

Packsat

0710

0299

0571 0501

0501

0879 0615

Sky

SKY+

Skymaster

0847 0856 0887 1014

1175

0713 0605 0157 1200

1085 1075 0628

0200

Palcom

Palladium

Palsat

Panasat

Panasonic

Panda

Lifesat

Logix

0605 0299 1043 0713

1017 1075

1284 0455

0887

Lorenzen 0299 1294 0607 0742 0132

Luxor

M&B1

Manata

Manhattan

Skymax

SkySat

0455

0084

0573 0501

0605

0710 0668 0713

1083 0455 0710 0668

0834 1017

0200

0750 0713 0173 0571

0571 0710 0173

0607

0847 1104 0455 1320

0455 0607 0173 0834

0668

0157 0605 0713

0132 0742

0157 0713 1200

1075 1085

Patriot

SM Electronic

Philips

0200 1114 0853 0455 0750

0710 0668 0571 0173 0133 1336

Smart

0132 0299 1101 0882

0396 1113 0115 0713

0282 0847 0853 0455

0132

0605 1099 1100

Marantz

Maspro

Matsui

Max

Phonotrend

Pioneer

Planet

Polytron

Praxis

Preisner

0863 1017 1200

0329 0853 0352

0871 0396

0132 0607

Sony

Starland

Strong

Sunsat

Sunstar

Tantec

Tatung

Teac

1294

1011

0607

0396

0511

0713

0605

0853

1206

0879 0853 1105 1159 1300

Mediabox

Mediacom

MediaSat

Medion

Medison

Mega

0132 0396 1101 1113

0713

0132

0455

1322

1200

Hirschmann

0396 0882 1113 1111

Premiere 0853 1114 1127 0723 1111

1176 1195 1100 0249 0658 1435

0173 0573 1085 0299 0501

0710 0607 0668

0455

0501 0853

0713 0299 1043

0713

Primacom

Proﬁle

Promax

Prosat

Prosonic

Pye

1111

0668 0710

Hitachi

HNE

Houston

Humax

Huth

Hyundai

ID Digital

Imex

0742 0132

0668 0396

1176 0863

0200

0455

0628

0742

0571

0834

Tecatel

TechniSat

Metronic 0713 1215 0084 0885 1205

Metz

Micro

Micro electronic

Micro Technology

Micromaxx

Microtec

0200 1099 1100 1195

0501 1322

1206

0173

0607 0501 0713

0713

0132 0607 1017 1075

1011 1159 1075

1176 0863

Technosat

Technowelt

Techsan

Techwood

Telasat

Pyxis

0607 0885

1017

0114

0605 0115 0607

0713

0299

0713

Quadral

Quelle

Radiola

0628 0668 0710 1323

0607 0742 0115

0200

0084

0396 0882

Ingelen

- 66

32122 DVD Rec_Centros_GB.indb 66

26.04.2005 11:24:06

Download from Www.Somanuals.com. All Manuals Search And Download.

RC3 code list

Teleciel

Telecom

Telefunken

Teleka

1043

0713

0710

France Telecom

General Instruments

Jerrold

Kabelvision

Macab

0817

0276

0003 0276

0003

0396 0750 0501 0607 0834

0605 0607

Telesat

0817

Telestar

0501 1099 1100 0114

0200 0157

Melita

MNet

0003

0443

Teletech

Televes

0114

0455 0501 0132

Mr Zapp

Noos

NTL Cabletell

Ono

0817

0276

1068

Thomson 0455 0713 0853 0115 0607

12910820 0668 0710 1046

Thorn

Tokai

Tonna

Topﬁeld

Toshiba

TPS

0455

0200

Optus

Pace

Philips

PVP Stereo Visual

Sagem

0276 1060

1068 1060

0817 0286

0003

0455 0668 0501 0713 0834

1206

0455

0820 1253

0817

0443

Tele+1

Triasat

Triax

0501

Telepiu

Tudi

United Cable

0443

0286

0003

0501 0115 0200 0396 0713

08530114 1296 1291 0132

Turnsat

Twinner

UEC

0713

0132 0713

Visiopass

0817

0879

0157

Uher

Unisat

Universum

0200

0173 0571 0607 0299

0115 0742 1087

Van Hunen

Variosat

Ventana

Vestel

VH-Sat

Viasat

Visionic

Visiosat

Wetekom

Wewa

0299

0173

0200

0742

0299

1323 1023 0820

1105

0710 0713

0157 0605 0501

0455

Wisi

0173 0396 0299 0455 0501

0607 0834

Worldsat

XCOM

XSat

Xtreme

YES

0710 0114 0123 0668

0123 0668

0668 0713 0123

1300

0887

Zehnder 1075 0742 0114 0115 0419

Zenith

Zeta Technology

Zinwell

0856

0200

1176

Cable Box (STB)

Austar

Canal Plus

Comcrypt

Decsat

Filmnet

0276

0003

0443

0423

0443

67 -

32122 DVD Rec_Centros_GB.indb 67

26.04.2005 11:24:06

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code when ﬁrst setting up “Disc Audio“, “Disc Subtitles“ and/or “Disc Menu“. (Further information can be found under “Disc Languages“ on

page 21.)

Code Language

6565

6566

6570

6577

6582

6583

6588

6590

6665

6669

6671

6672

6678

6679

6682

6765

6779

6783

6789

6865

6869

6890

6976

6978

6979

6983

6984

6985

7065

7073

7074

7079

7082

7089

7165

7168

Afar

7387

7465

7473

7487

7565

7575

7576

7577

7578

7579

7583

7585

7589

7665

7678

7679

7684

7686

7771

7773

7775

7776

7778

7779

7782

7783

7784

7789

7865

7869

7876

7879

7982

8065

8076

8083

8084

8185

8277

8279

8285

8365

8368

8372

8373

8375

8376

8377

8378

Hebrew

Japanese

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Canadian

Korean

Kashmiri

Kurdish

Kirgiz

Latin

Lingala

Laotian

Lituanian

Latvian

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldovian

Marathi

Malay

Maltese

Burmese

Nauruan

Nepalese

Dutch

Norwegian

Oriya

Punjabi

Polish

Pashto

Portuguese

Quechua

Romansh

Romanian

Russian

Sanskrit

Sindhi

Serbocroat

Singhalese

Slovak

8379

8381

8382

8385

8386

8387

8465

8469

8471

8472

8473

8475

8476

8479

8482

8484

8487

8575

8582

8590

8673

8679

8779

8872

8979

9072

9085

Somali

Albanian

Serbian

Sudanese

Swedish

Swahili

Tamil

Telugu

Tadzhik

Thai

Tigrinya

Turkmen

Tagalog

Tongan

Turkish

Tatar

Abkhaz

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bengali; Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Twi

Ukranian

Urdu

Welsh

Danish

German

Bhutanese

Greek

Uzbek

Vietnamese

Volapuk

Wolof

English

Xhosa

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fijian

Faroese

French

Frisian

Yoruba

Chinese

Zulu

Irish

Scottish

Gaelic

7176

7178

7185

7265

7273

7282

7285

7289

7365

7378

7383

7384

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Indonesian

Icelandic

Italian

Slovene

Samoan

Shona

- 68

32122 DVD Rec_Centros_GB.indb 68

26.04.2005 11:24:07

Download from Www.Somanuals.com. All Manuals Search And Download.

List of country codes

Key in the corresponding code when ﬁrst setting the “country code“ (see page 24).

Code Country code

Cape Verde

Christmas Islands

Cyprus

Czech Republic

Germany

Andorra

Hungary

Indonesia

Ireland

Montserrat

Malta

Mauritius

Maldives

Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Israel

India

Djibouti

Albania

Armenia

Dutch Antilles

Angola

Antarctic

Argentina

American Samoa

Austria

British Territory

in the Indian Ocean

Iraq

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

West Sahara

Eritrea

Spain

Iran

Iceland

Italy

Jamaica

Jordan

Australia

Aruba

Japan

Kenya

Kirghizia

Cambodia

Kiribati

Azerbaizhan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Ethiopia

Finland

Fiji

Comoros

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Saint Kitts and Nevis Anguilla

North Korea

South Korea

Kuwait

Cayman Islands

Kazakhstan

Laos

Panama

Peru

Burundi

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Benin

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Lebanon

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Bhutan

Gibraltar

Bouvet Island

Botswana

Byelorussia

Belize

Lesotho

Greenland

Gambia

Guinea

Lithuania

Luxembourg

Latvia

Palau

Paraguay

Qatar

Reunion (French)

Rumania

Russian Federation

Rwanda

Saudi Arabia

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich Islands

Guatemala

Guam (USA)

Guinea Bissau

Guyana

Canada

Libya

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Morocco

Monacco

Moldova

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Macao

Hong Kong

Heard and McDonald

Islands

Cameroon

China

Columbia

Costa Rica

Former Czechoslovakia

Cuba

Honduras

Croatia

Haiti

Northern Mariana Islands

Martinique (French)

Mauretania

69 -

32122 DVD Rec_Centros_GB.indb 69

26.04.2005 11:24:07

Download from Www.Somanuals.com. All Manuals Search And Download.

Service Addresses

Australia

Israel

Switzerland

Telion AG

Rütistrasse 26

CH-8952 Schlieren

Tel. 044–732 15 11

Fax 044–730 15 02

Slowenia

International Dynamics Australasia Pty Ltd.

129 Palmer Street

AUS - Richmond, Victoria 3121

Tel. 03–94 29 08 22

Fax 03–94 29 08 33

Benelux

RIF TRADING LTD

29 Izhak Sade Street

ISR–Tel Aviv 67213

Tel. 03–62 40 555

Fax 03–62 40 303

Italy

Loewe Opta Benelux NV/SA

Uilenbaan 84

Loewe Italiana srl

Lago del Perlar, 12

I–37135 Verona

Tel. 045–82 51 611

Fax 055–82 51 622

Malta

Mirage Holdings Ltd

Flamingo Complex

Cannon Road

Jadran Trgovsko Podjetje

Partizanska cesta 69

SL–6210 Sezana

Tel. 057–310 441

Fax 057–310 442

Spain/Canary Islands

Gaplasa S.A.

Conde de Torroja, 25

E–28022 Madrid

Tel. 91–748 29 60

Fax 91–329 06 71

South Africa

THE SOUNDLAB PTY LTD

P.O. Box 31952

B–2160 Antwerpen

Tel. 0902–88 00 2

Tel. 03–270 99 30

Fax 03–271 01 08

Loewe Opta Nederland B.V.

Ravenswade, 54A1

NL–3439 LD Nieuwegein (Utrecht)

Tel. 0900–20 20 180

Fax 030–280 33 27

Denmark

M–Qormi

Tel. 22 79 40 00

Fax 21 44 59 83

Morokko

Kjaerulff 1 A/S

C.F.Tietgens Boulevard 19

DK–5220 Odense SØ

Danmark

Tel. 0661–354 80

Fax 0661–354 10

Germany

Loewe Opta GmbH

Customer Care Center

Industriestraße 11

D–96317 Kronach

Tel. 01801–22256393

Fax 09261–99500

www.loewe.de

SOMARA S.A.

377, Rue Mustapha El Maani

MA–20000 Casablanca

Tel. 02–22 20 308

Fax 02–22 60 006

Norway

CableCom AS

Østre Kullerød 5

N–3214 Sandefjord

Tel. 033–48 33 48

Fax 033–44 60 44

Austria

Loewe Austria GmbH

Parkring 10

Kylami 1684

Republic of South Africa

Tel. 011–46 64 700

Fax 011–46 64 285

Czech Republic

TIPA sdruzení

Dolní nám. 9

CZ–746 01 Opava 1

Tel: 0553-62 49 44

Fax: 0553-62 31 47

Turkey

Enkay Elektronik Servis Müdürlügü

Alemdag Cad: Site Yolu No.: 10

Ümraniye/ Istanbul

Tel. 0216–523 15 94/96

Fax 0216–523 16 58

Hungary

Basys Magyarorszagi KFT

Epitok utja 2–4

H–2040 Budaörs

Tel. 023–415 637/121

Fax 023–415 182

Cyprus

France

Loewe France S.A.

11 rue de la Durance

F–67100 Strasbourg Cédex 1

Tel. 03–88 79 72 50

Fax 03–88 79 72 59

Greece

SOUND HELLAS S.A.

Kleanthous Str. 10

GR–54642 Thessaloniki

Tel. 2310–856 100

Fax 2310–856 300

Great Britain

LinnSight Ltd.

PO Box 8465

Prestwick

UK – KA 7 2YF

Tel. 01292–47 15 52

Fax 01292–47 15 54

CIS

A–1010 Wien

Tel 01–51 63 33 034

Fax 01–51 63 33 032

Poland

Piotech

ul. Boh. Getta Warszawskiego 18

PL–81-609 Gdynia

Tel./Fax 058–62 43 467 / 058–62 45 009

Portugal

Vídeoacustica

Comercio e Representacoes de

Equipamentos Electronicos S.A.

Estrada Circunvalacao

Quinta do Paizinho, Arm. 5

P–2795-632 Carnaxide

Tel. 21–42 41 770

Fax 21–41 88 093

Sweden

L&M Euroappliances Ltd

P.O. Box 23426

Kennedy Avenue 1A&B

CY–Nicosia

Tel. 02–42 05 10

Fax 02–42 87 70

Canseda AB

Service Center Loewe

ul. Verkhnyaya Maslovka, d. 29

RUS–125083 Moscow

Tel. 095–212 50 43, 956 67 64

Fax 095–212 47 10

Amalia Jönssons Gata 19

S–421 31 Västra Frölunda

Tel. 031–70 93 760

Fax 031–47 65 15

CH/05/04/1.2

Subject to modiﬁcations!

- 70

32122 DVD Rec_Centros_GB.indb 70

26.04.2005 11:24:07

Download from Www.Somanuals.com. All Manuals Search And Download.

Kyocera Printer KM C1530 User Manual
La Crosse Technology Clock Radio WT 5600 User Manual
La Crosse Technology Network Router WS 7013TWC User Manual
Lanier Car Amplifier 480 0239 User Manual
LG Electronics TV Antenna MODEL 42LF66 42LF66 ZE User Manual
Linear Safety Gate DRG User Manual
Linksys Router EA6900 User Manual
Lochinvar Boiler 400 801 User Manual
Lopi Indoor Fireplace Freedom Bay Fireplace Insert User Manual
Magnavox CD Player AZ7275 17 User Manual