Operating Instructions
TV
+
+
Individual 32 Selection HD /DR
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control – TV Functions
Switch on/off
(Page 18).............................................................. Sound off/on
(Page 50).....................LED display for current operating mode
– to standby mode ..................................................(page 11)
Switch over to radio mode(1 .....................(page 11; page 34)
(Page 10; page 50) .............................Switch over to TV mode
Switch over to operate DVD player..........................(page 50)
Set sound mode (page 18)
(Page 50).................................Switch over to operate recorder
(Page 47).................................................Timer overview on/off
(Page 20).......................................................Set picture format
Select station directly;
MENU: Enter numbers or letters..............................(page 16)
AV selection.............................................................(page 17)
PIP on/off (picture in picture)....................................(page 26)
(Page 20)....................................................Assist+ menu on/off
(Page 28)........................... Electronic Programme Guide on/off
Index on/off
MENU: Info texts on/off...........................................(page 14)
(Page 30).............................................................Teletext on/off
(Page 13)...............................................................Menu on/off
Status display on/off ................................................(page 21)
MENU: Hide menu...................................................(page 13)
(Page 18)......................................V+/V– volume louder/quieter
P+/P– select station up/down..................................(page 16)
(Page 27)................................... PIP: Position of the PIP picture;
(Page 13)........................................................ MENU: select/set
Station list on
.....................................................(page 16)
MENU: confirm/call..................................................(page 13)
Green button:
(Page 20)..........................................................Teletext subtitles
Yellow button: Last station ......................................(page 20)
Blue button: Programme info on/off .......................(page 20)
Red button:
(Page 20)............................................................Call DR archive
Digital Recorder: Jump forward/Fast forward(2
Digital Recorder: Play/Set bookmark(2
Digital Recorder: Stop (live picture)(2
Digital Recorder:Jump back/Rewind/Replay (2
(Page 11).................................................... /in the wizard: Back
Direct recording
Digital Recorder:
Freeze picture/Pause (start offset TV viewing)(2
(1 Radio only for DVB reception, provided the station broadcasts this.
Otherwise switch-over to an audio input.
(2 Description of the functions, see operating manual Digital Recorder.
3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Control unit front side of the device
Button M:
Call the menu
in the menu: up/down
Display:
= Standby
The mains switch is on the bottom
of the set in the middle
= Operation
= Operation without on-screen display
(Radio, EPG data capture or timer recording)
On/Off button:
Switch on from the standby mode
Switch off from the standby mode
Button +:
Station up
in the menu: to the right
Button – :
Station down
DR+
in the menu: to the left
Display DR+:
Button R:
Radio on/off (1 (back to TV mode)
Switch on the radio from the standby mode
in the menu: down
DR+ = Digital Recorder integrated, but inactive
(no recording, no playback)
DR+ = Digital Recorder active (offset TV viewing
or archive playback)
DR+ = Digital Recorder active
(archive recording)
(1 Radio only for DVB reception, provided the station broadcasts this.
Otherwise switch over to an audio input.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections rear side of the device
Headphones
connection
Factory settings:
AV1: DVD player
AV2: DVD recorder
S-VHS connection (AVS)
(e.g. for camcorder)
You can change this during the
initial installation (page 11) or in
the connection wizard (page 35).
Video in (AVS)
Audio in right (AVS)
Before you connect other devices
or make any changes, please start
the connection wizard (page 35)
and the sound components wizard
(page 39), and then follow the
instructions that are displayed on
the TV set.
Audio in left (AVS)
USB connection
(USB stick/card reader)
Common Interface 1
(CI-Slot 1)
Common Interface 2
(CI-Slot 2)
mains switch
AUDIO OUT L/R - audio output left right (analogue)
AUDIO IN1 L/R - audio input left/right (analogue)
AUDIO IN1 C - centre audio input (analogue)
ANT SAT(1
Satellite antenna
(Sat tuner 1)
SD/HD-COMPONENT IN Cb/Pb–Cr/Pr–Y - component video inputs
AUDIO DIGITAL IN - digital audio input
AUDIO LINK - surround audio outputs (analogue)
ANT2
Antenna/cable
analogue/digital
(Tuner 2)
CONTROL - rotating stand control
RS-232C - serial interface
220-240V~ 50/60Hz
mains connection
SERVICE - service socket
AUDIO IN2 - audio input (analogue)
HDMI2 - HDMI (DVI) input 2
ANT OUT
Connect antenna
output with ANT-TV
(tuner 1)
AV1
Euro-AV
socket 1
AV2 (RGB)
Euro-AV
socket 2
HDMI1 - HDMI (DVI) input 1
ANT SAT2(1
Satellite antenna
(Sat tuner 2)
ANT-TV
PC IN - VGA-/XGA input
AUDIO DIGITAL OUT - digital audio output
Antenna/cable
analogue/digital
(Tuner 1)
(1 Digital twin satellite tune optionally available as an upgrade kit (see accessories, page 55).
5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you!
About this operating manual
At Loewe, we combine the highest standards of technology, design and
user friendliness. This applies equally for TV, video and accessories.
For many questions concerning the technology you will find an answer
in the index of your TV set. If your question concerns TV set operation,
you can access a function directly from the index of the TV set. Owing to
this possibility, this operating manual only explains the most important
operating steps.
Your new TV set is equipped for the TV standard "HDTV"
(High Definition Television). With its high resolution screen
and future-safe digital interfaces HDMI (High Definition
Multimedia Interface), it offers the possibility of present-
The index/glossary from page 56 onwards gives explanations of certain
terms used in the TV set and the operating manual.
®
ing HDTV programmes in outstanding picture quality.
Paragraphs beginning with the symbol ➠ indicate important hints, tips
or conditions for trouble-free operation.
Terms which you will find in the menu or printed on the TV are written
in bold type.
In the functional descriptions, the necessary operating elements are ar-
ranged to the left of the text containing the handling instructions.
HDTV is a worldwide, digital standard in the 16:9 format
which revolutionises normal TV viewing. It is broadcast
with an up to five times greater resolution than conven-
tional signals and therefore creates an unexpectedly 3D
S
®
®
image.
The TV set is equipped for digital reception. You can use the already
frequently broadcast "everywhere television" (DVB-T) as well as digital
cable (DVB-C) and digital satellite (1 reception (DVB-S).
TV set equipment
See the rating plate on the rear of the set for the precise product desig-
nation. The precise features are listed in the Integrated features item in
the index of the TV set (see page 14).
+
The Loewe Digital HD platform even allows dual reception of DVB-T,
DVB-C and DVB-S (1.
The TV set is equipped with a Dolby Digital Decoder. You can connect
a speaker system (e.g. Loewe Individual Sound) or active speakers and
enjoy movie theater sound.
Trademarks
You can connect a card reader or a USB stick with digital photos to your
new TV set's USB connection and view your photos via the integrated
PhotoViewer software.
Manufactured under licence from Dolby Laboratories. "Dolby", "Pro Logic"
and the double-D symbol are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are trademarks of Digital Theater
Systems Inc.
All the functions can be operated with the Loewe remote control.
We have designed the TV set in such a manner that you can easily
operate it with the help of wizards and menus. Information about the
menu settings is displayed automatically. You will quickly comprehend
the context.
D I G I T A L
VIRTUAL SPEAKER
SURROUND
The screen font "LoeweL2700" is based on the "Tavmjong Bah Arev
(tavmjong.free.fr)" font, which in turn is based on "Bitstream Vera".
Bitstream Vera is a trademark of Bitstream Inc.
Scope of delivery
• LCD-TV set
• Mains cable
Acknowledgements
Loewe Opta GmbH
Industriestr. 11
D-96317 Kronach
• Table stand (Screen Table Stand)
• Remote control Assist with two batteries
• Marketing and service card
• Operating instructions of the Digital Recorder
• This operating manual
Printed in Germany
Date of issue 03/07-2.0 Be/Ps
TV–SW: 1.3.0 / DVB–SW: 1.1.0
© Loewe Opta GmbH, Kronach
All rights including translation, technical modifications and errors reserved.
(1 Digital twin satellite tune optionally available as an upgrade kit
(see accessories, page 55).
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Programming and managing recordings
Operating convenience with wizards
This TV set offers user prompting with wizards that take you through the
settings step-by-step.
The recording wizard can be called quickly via the timer overview and
helps you to program a video recording with a video recorder, DVD re-
corder, or the integrated Digital Recorder (see page 46).
You can return to the previous step or exit the wizard at any time.
Station list
The station list is a list of all stored stations. You can also use the station
list for switching stations conveniently (see page 16).
The wizards in overview
Initial installation
The initial installation wizard helps you with the initial installation and
connection of any existing equipment (see page 11).
Software update wizard
The latest software for your TV set can be loaded via satellite or via USB
stick (see page 33).
Setting up the antenna
You enter in the antenna wizard which antenna signals are available to
you. The antenna wizard is called in initial installation (see page 11). You
can also call the antenna wizard in the TV menu under Connections →
Antenna DVB → Antenna DVB-S (1 or Antenna DVB-T.
Info display and TV index
An information display for each menu item
Search wizard
The info display automatically shows content-based info texts in the
upper part of the screen for each menu item. It forms a convenient
operating system with the index (see page 14).
If you want to search for new stations after the initial installation, or if
you have set up your antenna for the first time, then you can handle this
task with the help of the search wizard (see page 22).
An index in the TV set
Connecting external devices
The index gives you an overview of the functional scope of your TV set. You
can also start wizards and menu settings directly from here (see page 14).
The connection wizard ensures that all devices are correctly registered
and connected. It is started automatically at the end of the initial instal-
lation wizard but can also be called separately (see page 35).
You can select your language for operating the TV set.
Connecting sound components
The sound component wizard ensures that the components which re-
produce the TV sound are correctly registered, connected and set. It is
started automatically at the end of the initial installation wizard but can
also be called separately (see page 39).
Index
Language
Integrated features
Repeat initial installation
*
OK
Access code
ASSIST+
Automatic dimmer
Automatic station programming
END
Assist+
OK
Activate
Previous/next letter
You can select the most important modes directly via a menu. Digital Re-
corder Archive, Radio, Favourites, PhotoViewer, Index and Personal Text
Pages can be selected (see page 20).
Select letter
P+ Page ↓↑
a
-
z
P–
(1 DVB-S settings only possible if digital twin satellite tuners have been retrofitted
(see accessories, page 55).
7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
For your own safety and to prevent unnecessary damage to your device,
read and comply with the following safety instructions:
Power supply
The wrong voltage can damage the set. This equipment must only be
connected to a mains power supply which has the same voltage and
frequency as that specified on the rating plate; use the mains cable
provided. The mains plug of the TV set must be easily accessible so that
the device can be disconnected from the mains at any time. When you
unplug the mains plug, do not pull on the cable rather pull on the plug
housing. The cable in the mains plug could be damaged and cause a
short circuit the next time it is plugged in.
Proper use and environmental conditions
This TV set is designed exclusively for reception and reproduction of
video and audio signals and is designed for living rooms or office facilities,
and should not be operated in rooms with high humidity, such as a
bathroom, or sauna, or where there is a high concentration of dust (e.g.
workshops).
Lay out the mains cable in such a manner that it cannot be damaged.
The mains cable must not be kinked or laid over sharp edges, stepped
on or exposed to chemicals; The latter also applies for the entire equip-
ment. A mains cable with damaged insulation can cause electrical shock
and is a fire hazard.
If the set is used outdoors ensure that it is protected against moisture
(rain, splashing water, or dew). High humidity and dust concentrations
cause leak currents in the device, which can cause a shock hazard if the
device is touched, or a fire.
If you have brought the set into a warm environment from the cold, then
wait for about 1 hour before switching it on to avoid formation of con-
densation.
Air circulation and high temperatures
The vent slots on the rear panel of the set must always be kept free.
Please do not place newspapers or cloths on/over the TV.
Do not place any objects filled with liquid
or burning candles on the device.
Ensure that there is at least 10
The manufacturer‘s warranty is only
valid for use in the specified permissible
environment.
cm free space on the sides and
above the set for air circulation,
if the set is placed in a cabinet
or on a shelf.
10 cm
10 cm
10 cm
Do not install the TV where there may
be vibrations. This can lead to material
overload.
.
Like any electronic device, your
TV set requires air for cooling.
Obstruction of the air circula-
tion can cause fires.
.
Transporting
The set is suitable for different
installation solutions. See the
Only transport the device in vertical position. Grasp the device on the
upper and lower edges of the housing.
instructions for assembly for the different installation solutions.
The LCD screen is made of glass or plastic and can break if not handled
properly.
If the LCD screen is damaged and liquid crystal escapes, wear rubber
gloves when moving the device. In the case of skin contact immediately
wash thoroughly with water.
Stand the TV set with the table or floor stand only on a level, sturdy,
horizontal base. Particularly ensure that the set does not protrude to the
front when placed in or on pieces of furniture.
Set up the device where it is not exposed to direct sunlight and where it
is not exposed to additional warming through heating elements.
Prevent metal items, needles, paper clips, liquids, wax, or similar items,
from getting into the interior of the device through the vent slots in the
rear panel. Such objects can cause short circuits in the set, which could
possibly cause a fire.
If something should get into the interior of the set then immediately
unplug the mains plug of the device and contact customer service for
more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
Environmental protection
Repairs and accessories
Energy consumption
Your TV set is equipped with an eco-standby power supply. In the standby
mode, the power consumption drops to low power (see technical data on
page 54). If you want to save even more energy then switch the device
off with the mains switch. However note that in this case, EPG (Electronic
Programme Guide) data will be lost, and it may be that programmed
timer recordings cannot be executed via the TV device.
Never remove the back of the TV set yourself. Only have your TV device
repaired or serviced by authorised television technicians.
Only use original accessories such as Loewe stands if possible (see Acces-
sories on page 55).
Supervision
Do not allow children to use the TV set without supervision or to play in
the immediate vicinity of the TV set. The set could tip over, be pushed
off or pulled down from the stand surface and injure someone.
Packaging and box
You have made a decision to purchase a high-quality technical product
with a long service life. For disposal of the packaging, in accordance with
national legislation we have paid a fee to a commissioned recycler to pick
up the packaging from the dealer. Nevertheless we recommend keeping
the original box and packaging material on hand so that the device can
be transported with optimal protection if necessary.
Do not allow the switched-on TV set to run unattended.
Volume
Loud music can lead to ear damage. Avoid extreme volume especially
over long periods and when using headphones.
The set
The EU directive 2002/96/EC regulates the proper way
to recycle, handle and utilise used electronic devices.
Old electronic devices consequently must be disposed of
separately. Please do not dispose of this device in normal
household trash!
Cleaning
Clean the TV set, the screen, and the remote control unit with a soft,
moist, and clean cloth,only, without any aggressive or scouring cleaning
agents.
The front screen may only be removed by your dealer, even if it is soiled
on the inside.
You may return your used set free of charge at designated
recycling centres or at your specialist dealer whenever you purchase a
new, comparable set. Additional details about return (also for non EU
countries) are available from your local municipal authorities.
Thunder storms
Pull out the mains plug and all connected antenna cables from the TV
set in a thunderstorm. Overvoltage caused by lightning can damage the
set via the antenna system, as well as via the mains. The mains plug and
all connected antenna cables should also be pulled out during long pe-
riods of absence.
Batteries
The batteries supplied as initial equipment do not contain
any pollutants such as cadmium, lead, or mercury.
Used batteries should no longer be disposed of in the do-
mestic waste according to the Battery Ordinance. Dispose
of your batteries at no charge in the collection containers
which are set up for this purpose in retail stores.
Note on the LCD screen
The TV set you have purchased with LCD screen satisfies the most rigor-
ous quality requirements and has been inspected relative to pixel errors.
In spite of the utmost care in manufacturing the display, for technical
reasons the possibility that some pixels will have defects cannot be 100%
excluded. Please understand that these types of effects, as long as they
are within the standard of specified limits, cannot be considered as a
device defect in terms of the guarantee.
9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial installation
Installing the TV set
Connecting the TV set
Install as manually rotatable table unit with the Screen Table Stand
included.
See Accessories (page 55) for other installation possibilities.
Connecting to the mains
Remove the cover for the connections.
Connect the TV set to a 220-240V outlet:
First plug the small plug of the mains cable into the
mains connection on the rear of the TV, then plug the
large plug into a mains power outlet.
Preparing the remote control unit
Inserting or replacing batteries
Connecting the antenna
Press the embossed arrow and push down the battery
compartment cover.
Analogue / DVB-C / DVB-T antenna:
Plug the antenna plug of antenna system, cable system,
or room antenna into the ANT2 socket.
The connecting cable between ANT-TV – ANT OUT is
plugged at the factory.
Insert two alkaline manganese LR 03 (AAA) batteries;
ensure that the + and – poles are correctly positioned!
Slide the cover up from below.
Satellite antenna (1:
Connect an antenna plug, e.g. from the antenna change-
over switch or from the twin-LNC of the satellite system
to the sockets ANT-SAT and ANT-SAT2.
When connecting only one SAT antenna cable, connect
it to ANT-SAT.
ANT2
Adjusting the remote control for operating the TV set
Press the TV button.
See page 50 to learn about operating other Loewe
devices.
ANT
SAT2
ANT
SAT
220-240V~
50/60Hz
TV
R
Connections on the back of the set (see also page 5).
Replace the cover over the connections.
Receiving coded stations
When using a CA module and a Smart-Card to receive
coded stations, please observe the handling of the CA
module (see page 32).
(1 Digital twin satellite tune optionally available as an upgrade kit
(see accessories, page 55)
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial installation
Turning the set on/off
First installation wizard
Switching the TV set to standby mode
First installation after switching on for the first time
This wizard starts automatically after the set is switched on for the first
time, however it can also be called later manually in the TV index, see
Repeat initial installation on page 14.
Press the mains switch on the bottom of the set.
The display in the control panel on the front of the set
will be illuminated red, the set is now in standby mode.
First installation wizard
Which language do you want to use for operation?
Switching the TV on/off on the control unit
Initial installation
Language
Press the on/off button in the middle to switch the TV
set on/off.
Sprache
D
Kieli
SF
SLO
SK
TR
S
DK
P
OK
Language GB
Jezik
Display
Langue
Lingua
Idioma
Taal
F
Jazyk
Lisan
Språk
Sprog
Idioma
Язык
Språk
Meaning of the display colour:
I
E
Red:
Standby mode
NL
CZ
GR
PL
H
Jazyk
Green: TV set is switched on
Orange: Radio mode, TV set receives EPG data or timer
recording active
Γλώσσα
Język
RUS
N
Nyelv
OK
Proceed
The first step with the wizard starts when selecting the
language for the user prompts. From this point on follow
the instructions on your TV set.
Switching the set on with the remote control
Press the on/off button.
Brief explanation of button functions:
or:
Press the ring (up, down, left, right) to move the cursor
and to select settings.
numeric buttons (0–99).
or:
TV button.
By pressing the OK button a setting is confirmed and you
will go to the next step.
or:
OK button – station list is called.
You can select or remove several items with the yellow
button (see example below).
When an element is selected, it is marked by a check-
mark .
Switching the set off with the remote control
Press the on/off button.
Use this button to go back one step.
➠ Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
Exit the wizard with the END button (if available).
Initial installation
Connect antenna cable(s)
Antenna cable(s) for:
Antenna/cable (analogue)
DVB-T
to antenna socket(s):
Switching on/switching to radio mode
ANT TV
ANT TV
DVB-C
ANT TV
DVB-S (cable 1)
DVB-S (cable 2)
ANT SAT
ANT SAT2
Press R on the TV control unit.
Connect/disconnect
Back
OK
Proceed
or:
An example of multiple selection using the yellow button.
RADIO button on the remote control.
(radio mode, see page 34).
continued on the next page
Ž
11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial installation
Explanations of the setting possibilities:
Start search Start the automatic station search with OK.
First TV stations, then radio stations are searched for.
Location Select the country for country-specific pre-settings.
of TV set
The stations found in the automatic search are divided
into the appropriate station blocks depending on the
previously selected antenna cables (signal sources). Sub-
sequently the stations can only be re-sorted within these
blocks. At the beginning of the station list you will find the
block with the stations of the preferred signal source.
Antenna Antenna/cable (analogue): analogue stations via
selection
cable/antenna
DVB-T:
DVB-C:
DVB-S (line 1):
DVB-S (line 2):
digital, terrestrial stations
digital stations via cable
digital stations via satellite (1
digital stations via satellite (1
Any mixed sorting of stations from different signal sources
is only possible with the favourites list.
DVB-T: If you are using an active antenna, then select yes (5V)
Antenna for the antenna power supply.
Connecting In conclusion the connection wizard and the sound com-
additional ponents wizard will start; with their help you can register
devices and set your video devices, decoders, speaker system,
or a HiFi/AV amplifier and connect them to the TV set.
DVD players and DVD recorders are already registered
at the factory.
DVB-C: The conventional settings will be derived from the selection
Settings of set location. Only change this if you know other symbol
rates and modulation types or if you have to specify the
network ID for your cable network (information available
from your cable network provider). If you want to run the
station search independently of the channel grid, select
frequency search for the search method.
You can start the connection wizard and the sound
components wizard manually later and add new devices.
Further information is available from page 35 (Connection
wizard) and page 39 (Sound components wizard).
DVB-S (1: Select which satellite(s) you receive from a list. For more
Satellite than one satellite, select the type of your changeover
system switch or communal satellite system additionally.
Ask your dealer in this regard.
Digital Link If you have registered and connected a recorder in the
Plus connection wizard, the Digital Link Plus transmission
begins at the end of the sound components wizard. If
a Digital Link Plus capable recorder is connected, the
station list of the analogue stations is transmitted to the
external recorder.
High band Specify here whether the high band of the selected satellite
is to be searched in addition to the low band.
You can also call Digital Link Plus under TV menu → Con-
nections → Digital Link Plus.
If you have not connected a Digital Link Plus capable
recorder, you can abort the transmission.
LNC Normally, you do not need to change the values for high
frequencies and low band, unless the LNC (LNB) of your satellite
Low Band / system uses a different oscillator frequency (important
High Band for the frequency display).
After you have made these settings, you should receive
the picture and sound of the selected satellites (only with
Astra1 and HOTBIRD).
Explanations of the DVB-T antenna:
Room
With good reception conditions a room antenna can be
antenna
used for DVB-T (socket ANT2).
Symbol rates The symbol rates are specified by the satellite provider
and normally do not need to be changed.
Active
antenna
Under less favourable reception conditions, it is advisable
to use an active antenna which has to be set accordingly
in the initial installation or in the TV menu → Connections
→ Antenna DVB → Antenna DVB-T (see DVB-T antenna
on this page).
Favoured Select the signal source that provides the stations to be on
signal source top of your station list (starting with station slot 1).
Unidirectional
antenna
If the location is outside of the normal transmission
range then a directional antenna can be used to improve
reception quality.
(1 DVB-S settings only possible if digital twin satellite tuners have been retrofitted
(see accessories, page 55).
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial installation
Operating convenience
Positioning/aligning DVB-T antenna
General information on menu operation
If you are receiving one or more DVB-T stations with picture and sound
interference then you should change the installation location and align-
ment of the antenna. Ask your dealer to tell you which channels are used
to broadcast the DVB-T stations in your region.
Use the MENU button to call menus for the various modes. Additional
menus can be called directly with the remote control.
The menus are displayed at the bottom of the screen. At the top you get
additional information about the selected menu item (see info display
on page 14).
➠ In normal TV mode, without other displays.
➠ In normal TV mode, without other displays.
A DVB-T station is received and selected.
Call TV menu.
Call TV menu.
Picture
34Select Settings,
6 go to the menu line below.
Here you can adjust among other things: Contrast, colour, brightness, picture
adjustment, sharpness, picture format.
34Select Stations,
6 go to the menu line below.
34Select Manual adjustment,
OK call manual adjustment.
Signal source
Select the area in which you want the broadcaster to search here. You can
INFO
END
TV menu
Picture
use the
button to automatically select station by station.
Sound
Recording
Connections
Settings
Picture adjustment
...
Example: Selecting and executing functions
Manual adjustment
Signal source
Channel
Frequency
Bandwidth
Name
DVB-T
E05
177.50 MHz
7 MHz
12 Test
Level 99
DVB-C
DVB-S
A
34Select Picture,
6 go to the menu line below.
C/N 96
34Select Brightness,
6 go to the menu line below.
END
Overwrite station
Search
INFO
34Set Brightness.
The signal source is already on DVB-T due to the station
preselection.
Go to the Brightness menu line
to make other picture settings.
Position and align the antenna in such a manner that
34Select more ... ,
maximum values for C/N and Level are obtained.
OK call more ... functions.
Blue button: Start search.
34Select Auto format,
6 go to the menu line below.
Search for DVB-T stations one after another and compare
values for C/N and Level.
34Select on / off.
Then position/align the antenna to the weakest station
so that maximum values for C/N and Level are obtained.
Conclude the settings.
Thereafter perform an automatic search for all DVB-T
stations, see page 22.
Inputs via numeric buttons
Letters have to be entered for specific functions. Like
using a mobile phone keypad (1 to 9), press a numeric
button until the desired character appears.
Explanation of the setting possibilities:
Bandwidth Depending on the selected channel and country the
associated bandwidth of 7 or 8 MHz will be set auto-
matically.
The available letters are imprinted on the individual
numeric buttons.
13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating convenience
The info display
The info display shows a content-based info text for each menu item at
the top edge of the screen to help you in making the settings. In conjunc-
tion with the index it creates a convenient control system.
The index in the TV set
You can start all wizards and many operating functions directly from
this point. The complete function scope of the TV set can thus be easily
understood.
Alphabetic sorting is preceded by the items Language, Integrated features
and Repeat initial installation.
➠ A menu is displayed.
The factory setting makes the info display appear auto-
matically for each menu item. In this case you can
temporarily hide the info texts with the INFO button.
Call index
➠ In normal TV mode, without other displays.
The automatic info display can be hidden via a menu
setting. Then it can be displayed once by pressing the
INFO button.
Call Index.
You will see an info text for the highlighted keyword in
the info display.
Settings
You can select your language for operating the TV set.
Here, you can search for the stations automatically or manually as well as set
the menu language, timer functions, parental lock, on-screen displays, etc.
Index
OK
Language
Integrated features
Repeat initial installation
*
Access code
ASSIST+
Automatic dimmer
Automatic station programming
INFO
END
TV menu
Settings
Stations
END
ections
Picture
Sound
Recording
Conne
OK
Activate
Previous/next letter
...
Select letter
P+ Page ↓↑
a
-
z
P–
You can tell if an info text is available by an INFO icon
that is shown in the lower right above the menu bar.
If an OK symbol appears in the marked line, this function
can be called directly with OK.
Permanently display or hide the automatic info display
Selecting a keyword
Once you have become familiar with how to operate the TV set, you can
switch off the automatic info display.
Enter initial letters with the numeric buttons like with a
mobile phone keypad (see page 13).
➠ In normal TV mode, without other displays.
or go with:
Call TV menu.
34to the preceding / next letters,
34Select Settings,
6from line to line,
6 go to the menu line below.
34Select Miscellaneous,
6 go to the menu line below.
P+/P– scroll backwards or forwards in whole pages.
34Select On-screen displays,
6 go to the menu line below.
Example: You want to have the TV set switch off automatically at
a specific time:
34Select Automatic info,
6 go to the menu line below: yes / no.
Select the keyword Switch off → Automatic, with OK you
will go to the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating convenience
TV menu – Overview diagram
TV menu
Picture
Picture adjustment
Contrast
Colour intensity
Colour temperature
Brightness
Sound
Sound mode
DPLII mode(6
Sound adjustment
Headphone volume
Loudness
Settings
Connections
New devices/modifications(1
Sound components(1
Antenna DVB(1
Station
Search wizard (1
Manual adjustment
Change stations
Digital Link Plus
Miscellaneous
Select/change favourites
Parental lock
Manual adjustment of AV standard
Assign digital audio input
Allow switching voltage
RGB insertion at AV2
Sharpness
more...
Timer functions
Loudspeaker sound (2
Headphone sound (2
Auto volume
Switch off times (4
Digital Noise Control (DNC)
Alarm times (4
more...
Wake up with
Image+
AV output signal
Maximum volume
Switch on volume
Volume adjustment for
current station
Wake up signal volume
Picture format
Move picture up/down (3
Language
Miscellaneous
Auto format
Film quality improvement (DMM)
On-screen displays
On-screen display time
On-screen display position
Volume
Recording
Recording wizard(1
Timer list
Automatic info
Time and date
Time
Deviation from Universal Time
Date
Pre-record time
Post record time
Radio menu – Overview diagram
Beginning of daylight-saving time
End of daylight-saving time
Software update (1
CA module: xxx (5
DVB subtitles
Radio menu
Station
Search wizard(1
Manual adjustment
Change stations
Sound
Sound mode
DPLII mode(6
Sound adjustment
Headphone volume
Loudness
Timer functions
DVB character set
Western European
Polish
Standard
Rotate TV (7
Activate switch-off position
Set switch-off position
Basic adjustment
Switch off times(4
Alarm times(4
Wake up with
Wake up signal volume
more...
Auto volume
(1
(2
(3
(4
(5
(6
(7
A wizard is started here.
Menu items only appear for analogue stations.
AV output signal
Maximum volume
Switch on volume
Volume adjustment for
current station
Menu item only appears with certain picture formats (see page 20).
Summary of individual menu terms.
Menu item only appears if a CA module is plugged in (see page 32).
Menu item only appears with certain sound mode settings.
Menu item only appears when, for example, a stand with motor drive is used (see page 55).
15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
With the station list
➠ In normal TV operation, without further displays, no
Select station
With the keys P+ and P– on the remote control
favourites selected:
P+/P– station up/down.
OK call Station list.
The station display with sound identification is displayed
briefly.
Station list
Sorting
numerically
COMP. IN
HDMI1/DVI
HDMI2/DVI
VGA
AVS
DVD
5
hr-fernsehen
➠ If favourites are selected, the station is switched over
6 Phoenix
7 BR-alpha
in the favourites list with P+/P– (see page 17).
8 3sat
9 EinsExtra
10 EinsFestival
11 EinsPlus
➠ The symbols for the sound identification are described
VCR
VIDEO
0
12 ZDFinfokanal
13 ZDFdokukanal
14 ZDFtheaterkan
15 arte
on page 21.
OK
1 Das Erste
2 ZDF
3 WDR Köln
4 Bayrisches FS
➠ If there are additional languages or DVB subtitles for
DVB stations, then language and subtitle selection is
shown below the station display.
➠ See also page 21: Additional selection possibilities for
DVB stations.
16 DAS VIERTE
21:00 - 21:45 Urlaubsparadies - Toskana
OK
END
Switch to ...
Select station
Favourites
Scan stations
Change stations
Change sorting
0
-
9
INFO
P+ Page ↑↓
P–
P+/P– scroll in the pages of the station list.
With the numeric keys of the remote control
634 Mark stations.
1-digit stations
Keep the numeric button pressed for one second, the
or:
station changes immediately.
Enter the number of the station with the numeric buttons.
long
The marked station is shown as a small picture.
or:
Press the numeric button briefly, the station changes after
2 seconds (changes immediately in case up to 9 stations
are stored).
OK the marked station is called.
Blue button: Changes sorting from numeric to alphabetic.
2-digit and 3-digit stations
Press first (and second) numeric button briefly.
Station list
Sorting
alphabetically
3sat
9Live
COMP IN
Keep the last numeric button pressed for one second, the
station changes immediately.
short short long
OK
Das Erste
DSF
DVD
DVD-REC
arte
ARD
AVS
or:
Bayrisches FS
BR-alpha
BR
EinsExtra
EinsFestival
EinsPlus
Press all the numeric buttons briefly, the station changes
after 2 seconds (changes ilmmediately up to 99 or 999
stored stations).
Eurosport
CNN INT
21:00 - 21:45 Urlaubsparadies - Toskana
OK
END
Switch to ...
Select letter
Favourites
Scan stations
Change stations
Change sorting
4-digit stations
a
-
z
INFO
P+ Page ↑↓
P–
Press all four numeric buttons, the station changes imme-
diately.
Enter initial letters with the numeric buttons
like with a mobile phone keypad (see page 13).
The first station for the specified letters is marked.
all short
➠ If favourites are selected, the station in the favourites
list is switched to with the numeric buttons (see page
17). A maximum two-digit station input is possible.
634Mark stations.
➠ If you select an unoccupied station slot, the next avail-
OK the marked station is called.
able station is switched to.
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
With the favourites lists
Explanation of the icons following station names:
Digital DVB-T station (terrestrial via antenna)
Digital DVB-C station (via cable)
Digital DVB-S station (via satellite)
Coded station
You can save and call your favourite stations in 6 favourites lists (e.g. for
multiple users). Each favourites list can contain up to 99 stations. After
initial installation, 10 stations from the station list are already stored in
the first list. Change the favourites list to suit your requirements (see Put
together – changing favourites lists on page 24).
➠ In normal TV mode, without other displays:
Select video source
➠ Please ensure that the appropriate devices have also been registered
OK calls the station list.
with the device connection wizard (see page 35).
Red button: calls the favourites list.
Via AV selection
Favourites
Favourites 1
1 Das Erste
2 ZDF
3 WDR Köln
4 Bayrisches FS
5 hr-fernsehen
6 Phoenix
7 BR-alpha
8 3sat
Call AV selection.
OK
AV selection
OK
VIDEO
DVD
DVD-REC
AVS
PC IN
HDMI1/DVI
HDMI2/DV
34Select desired device or connection,
OK to switch over.
9 EinsPlus
10 EinsExtra
11 MTV
A signal from the selected video source should now be
visible.
12 VIVA
0
-
9
OK
END
Select station
Page ↑↓
Switch to ...
Station list
Scan stations
Change favourites
P+
P–
INFO
Via station list
Select station directly with numeric buttons.
➠ In normal TV mode, without other displays:
Or:
OK call the station list.
P+/P– scroll in the pages of the favourites list.
In numerical sorting the connections or devices are always
at the beginning of the list.
In alphabetic sorting, the connections or devices are
sorted in alphabetically.
6Mark stations.
OK the marked station is called.
34Select other favourites list
Station list
➠ Other favourites lists can only be selected if they also
COMP. IN
HDMI1/DVI
HDMI2/DVI
VGA
AVS
DVD
VCR
VIDEO
1 Das Erste
2 ZDF
3 WDR Köln
4 Bayrisches FS
5
hr-fernsehen
6 Phoenix
7 BR-alpha
8 3sat
9 EinsExtra
10 EinsFestival
11 EinsPlus
12 ZDFinfokanal
13 ZDFdokukanal
14 ZDFtheaterkan
15 arte
contain stations.
Red button: Back to the station list.
Green button: Scan all stations of the currently selected
OK
0
favourites list.
Yellow button: Change the favourites lists, see page 24.
16 DAS VIERTE
END
OK
Switch to ...
Select station
Favourites
Scan stations
Change stations
Change sorting
INFO
0
-
9
Explanation of the favourites lists
P+ Page ↑↓
P–
The selection made with the red button (station list or favourites list) is
retained until the next call. All inputs then refer exclusively to the currently
selected favourites list.
634 Select connection/device.
OK to switch over.
If favourites are selected, the name of the favourites list appears after
the station name.
17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Explanations of the sound settings:
Adjusting the sound
Sound mode Select the number of speakers you want to hear. The
selection depends on the connected sound components
(from page 39) and on the transmitted audio signal.
Switching sound off/on
Sound off;
➠ If the number of speakers appears in brackets, the
sound of missing speakers is transmitted by the existing
speakers (virtual).
Sound on: Press button again or set volume V+.
Setting the volume
V+/V– volume louder / quieter.
optimal The momentarily reproduced audio signal is output with
the ideal number of speakers.
1 Play centre sound or mono (left/right).
2 Play front sound (L/R stereo).
The volume bar will be shown briefly if no other menu
is displayed.
3 Play front and centre sound.
4 Play front and surround sound.
5 Play front, surround and centre sound.
Setting the sound mode
➠ You can also enter the number of speakers with the
numeric buttons of the remote control.
Call Sound mode.
Amplifier play via an external HiFi amplifier. Selection is only
possible if an amplifier has been selected in the sound
components wizard.
Sound mode
optimal
...
(5)
4
3
2
1
34Select the number of speakers you want to hear.
Sound Speech, Classical, Pop, Custom music, and Custom film
adjustment sound.
Additional sound settings for volume adjustment and for Sound mode:
Headphone vol. Adjust the headphones volume.
Loudness Proper boost of bass and treble tones at low volume.
➠ As long as you can still see the volume bar or the
selection of speakers for sound mode:
DPLII mode Here you can make Dolby Pro Logic II sound settings for
movie, music, matrix and personal settings. Menu item
only appears with certain sound mode settings.
Call additional sound settings.
END
Volume
24
Sound mode
DPLII mode
Sound adjustment
He
more ... call with OK.
Sound Selection possibility Mono/Stereo or Sound 1 or Sound
Speakers/ 2 for two-sound broadcasts separately for speakers and
Headphones headphones. Only available for analogue stations.
34Select sound setting,
6 Go to the menu line below.
Auto Volume Reduces volume differences, e.g. for advertisements that
are too loud.
34Make changes.
AV output Sound selection for two-sound broadcasts.
signal
Sound settings via the TV menu
➠ In normal TV mode, without other displays.
Maximum Determining the maximum volume that can be set.
volume
Call TV menu.
Switch on Specify the volume that is set when switching on the TV
volume set with the mains switch. This does not affect switching
the set on from standby mode.
34Select Sound,
6 go to the menu line below.
34Select desired sound setting,
6 Go to the menu line below.
Volume The volume can differ according to the individual stations.
adjustment for If the sound is too loud or too quiet in relation to other
current station stations, adjust the volume. When the menu is open, you
can select the stations one after another with P+/P– and
34Make changes.
adjust every single station conveniently.
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
TV menu
Picture (personal values, TV digital)
Picture adjustment
Standard values (TV digital)
Adjusting the picture
INFO
END
OK
Personal values (TV digital)
Call TV menu.
INFO
END
TV menu
Picture
Picture adjustment
34Select desired values for picture,
OK call selected values for picture.
Sound
Recording
Connections
Settings
...
34Select Picture,
6 go to the menu line below.
Explanations for picture adjustment
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise supression are saved in the per-
sonal values. There are separate personal values for every signal source
(TV analog, TV digital, HD analog, HD digital, PC, PhotoViewer).
TV menu
INFO
END
Picture (standard values, TV digital)
Picture adjustment
Standard values (TV digital)
Contrast
Colour intensity
C
...
By selecting Standard values the picture parameters are reset to factory
values for the respective currently active signal source.
For an explanation of the signal source; see glossary: Signal input
groups.
34Select the desired picture function,
6 go to the menu line below.
34Make changes.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset pic-
ture/sound or Initialise picture/sound or Factory settings picture/sound.
Explanations of the picture settings
Picture Switches the picture parameters between standard and
adjustment personal values.
Operation without remote control
Contrast Adjust contrast.
Colour intensity Adjust the colour.
Changing the station on the TV set
Colour Set warmer or cooler tints for the picture.
temperature
+ / – Station up/down.
Brightness Adjust the brightness of the picture.
Sharpness Adjust the contour sharpness of the picture.
DNC Removes or reduces the signal noise in the picture.
Switching radio on or off or switching to radio
more ... Call with OK.
Image+ Image improvement on/off and demo mode.
Picture format Setting possibilities for the picture format (see page 20).
R Radio on / off or switching between TV and radio.
Vertical Move picture vertically (see page 20).
picture hold
Calling the TV menu on the set
Auto format With Auto format switched on, the TV set recognises the
picture format for Cinemascope or wide screen movies
and adapts accordingly.
➠ Service is for customer service personnel only.
M call Direct control on TV set menu,
DMM Reduce image jolting.
Direct control on TV set
election
Volume
19
Brightness
Contrast
Picture format
Stat
Standard values / personal values for picture adjustment
Call TV menu.
– / + select function.
34Select Picture,
M or R go to the menu line below,
6 go to the menu line below.
– / + make changes.
34Select Picture adjustment,
6 go to the menu line below.
M move up one menu line,
– / + select other function.
19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
The Panorama picture format can be switched between
proportionally correct and format filling reproduction.
Dark margins are visible on the right and left of the picture
in proportionally correct reproduction.
Button functions
Each operating mode of the TV set (TV, Radio, Teletext, EPG, or Picture
in Picture) has a separate menu and separate functions for the coloured
buttons. The assignment of the coloured buttons is illustrated in the
description of the individual operating modes.
Switching over: Keep the M button on the set pressed,
at the same time press the Picture format button on the
remote control briefly.
Below, some of the button functions are listed which you need for daily
operation of your TV set.
Resetting: Press the same button combination again.
Functions of the coloured buttons in TV mode
Explanations of the picture formats
Red button: Digital Recorder: DR archive on/off.
➠ Setting possibilities depend on the displayed picture
Green button: Call menu Teletext subtitles.
content.
INFO
END
Teletext subtitles
with normal size
OK
16:9 Proportionally correct display of 16:9 programmes.
4:3 Proportionally correct display of 4:3 programmes.
with double size
34Select size of the Teletext subtitles,
Panorama Proportionally correct or format filling reproduction (delivery
status) of 4:3 broadcasts on the 16:9 screen. Station logos
and subtitles remain intact.
OK show Teletext subtitles.
(display only if subtitles are available).
END: Teletext subtitles off.
See above for switching Panorama mode.
Cinema Proportionally correct, format filling display of 4:3 broad-
casts on 16:9 screens.
Yellow button: Go to the last viewed station.
Use this button to quickly switch back and forth between
two stations.
Zoom Proportionally correct display. Maximum picture magnification.
Blue button: Show programme info.
PALplus Is a 4:3-compatible 16:9 picture broadcast supplied by
the station which is detected automatically.
1
ARD
14:30 - 15.15
Urlaubsparadies Toskana
If a high-resolution picture signal is displayed on the TV
set or fed in via the interfaces PC IN, HDMI1/DVI, HDMI2/
DVI or COMP. IN, the picture formats 16:9 TV, 4:3 TV as
well as 16:9 PC, 4:3 PC and Zoom can be set.
Move picture vertically
➠ In normal TV mode, without other displays:
6Move picture up/down.
END
Programme info
Detailed info
14:43
OK
Detailed info (teletext)
Programme preview
To show subtitles or news tickers which have been cut
off, the picture can be moved up or down in the picture
formats Panorama, Cinema and Zoom (not with high
resolution signal) with the arrow buttons 6.
Permanent display of time
Press twice in rapid succession,
the time is permanently displayed.
Call Assist+
14:42
Call the Assist+ menu.
K or END: Hide time.
Selecting the picture format
34Select DR archive, Radio, Favourites, PhotoViewer,
Index, Personal text pages.
Press the picture format button until the desired picture
format is marked or
OK calls the function.
INFO
END
ASSIST+
DR archive
OK
Radio
Favourites
PhotoViewer
Index
Perso
34to select the desired picture format.
OK
Activate
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Status display
Additional selection possibilities for DVB stations
In the status display additional selection possibilities can be offered for
specific programmes depending on the DVB programme provider.
➠ In normal TV mode, without other displays:
END: Show / hide status display.
➠ If during the status display you press one of the coloured
buttons or the TEXT button then the associated selection
menu will be displayed.
1
Das Erste
14:30 - 15:15
Language-/sound selection
14:42 Alarm time 20:00
Digital (5)
Toskana
Sleep timer 23:00
The following options are possible:
In the top two lines you will see the number and name of
the station, the title of the programme currently running
(if available) and the sound identification.
Red button: Channel selection for multi-channel providers
Green button: Language/audio selection
Yellow button:Time selection
The time and, if activated, the alarm time and switch-off
time are displayed at the bottom.
Blue button: Protection of minors
Explanations of the symbols for sound identification:
TEXT:
DVB subtitles
Transmitted audio signal:
Mono Mono audio transmission analogue
2-sound Two-sound transmission (Sound1/Sound2) analogue
Stereo Stereo sound transmission analogue or digital (PCM)
Digital Dolby Digital sound transmission (DD)
dts dts sound transmission
The selection menus are only available as long as the
status display is shown. However you can call them again
by pressing the END button.
Explanations of the selection possibilities
MPEG MPEG sound transmission
ProLogicII Dolby Pro Logic II
DVB subtitles The subtitle selection refers exclusively to DVB subtitles
and is not offered by all stations. Many stations only
transmit subtitles by teletext.
Transmitted audio channels:
DD / dts 1.0 / mono
DD / dts / MPEG 2.0
DD / dts
DD / dts
DD / dts
You can make general settings for DVB subtitles under TV
menu → Settings → Miscellaneous → DVB subtitles.
New The selection line is automatically displayed briefly, if a
programme new programme begins with options that are different
from those of the previous programme, or if you switch
to a different station.
DD / dts
DD / dts
DD / dts
DD / dts
Selected listening mode:
1 Play centre sound or mono (left/right).
2 Play front sound (L/R stereo).
3 Play front and centre sound.
4 Play front and surround sound.
5 Play front, surround and centre sound.
➠ If the number of speakers appears in brackets, the
sound of missing speakers is transmitted by the existing
speakers (virtual).
21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing stations
Explanations of some search settings:
TV stations
Set location Select the country for country-specific defaults and
station sorting.
Various options for managing stations are available via the TV menu. For
example the description for TV stations. For radio stations the same applies,
except that the radio menu is called in radio mode (see also page 34).
Signal source Select antenna, cable, or satellite here, depending on
where you want to search for new stations.
At this point you can also call a configuration of the
DVB-T and DVB-S antennae via the yellow button (see
page 12).
➠
Station management is not possible if a programmed timer recording
is still pending.
Search/update stations – Search wizard
In the search/update with the search wizard, new stations are searched
for which are not yet stored.
Antenna/cable: With selection of set location the conventional TV
TV/colour standard/colour standard is the default. This should only
standard be changed if stations with other standards are to be
searched.
➠ You have to repeat the initial installation (see page 11)
and automatically search for new ones if you want to
delete all the existing stations and automatically search
for new ones.
DVB-T If you want to run the station search independently of
Search method the channel grid, select frequency search for the search
method.
Call TV menu.
DVB-C With the selection of set location the conventional set-
Settings tings will be preset. Only change this if you know other
symbol rates and modulation types or if you have to
specify the network ID for your cable network (informa-
tion available from your cable network provider).
If you want to run the station search independently of
the channel grid, select frequency search for the search
method.
34Select Settings,
6 go to the menu line below.
34Select Stations,
6 go to the menu line below.
34Select Search wizard,
6 go to the menu line below.
In the upper info text the current search settings will now
be displayed:
DVB-S The symbol rate is specified by the satellite provider and
Symbol rate normally does not need to be changed.
Search wizard
Your TV carries out the update of the station range (search for new stations;
delete stations no longer broadcast) with the following settings:
Search/update stations – Search ended
Location of TV set
Signal source
Germany
Antenna/cable (analogue)
PAL-BG
After the station search has ended, the number of new
found stations is displayed.
TV/colour standard
OK to continue.
If new stations are found, these are displayed with the
appropriate station number.
TV menu
Settings
Stations
Search wizard
Change search settings
Search wizard
Automatic TV station search and sorting finished.
END
OK
Start search/update
Search for/update station
New found stations
30 TELE 5
31 N 24
32 QVC
33 E26
If you want to change these search settings:
OK
34Select Change search settings,
OK wizard prompts search settings.
If you agree with these settings:
34Select Start search/update,
OK start search.
OK
Proceed
OK to continue.
Red button: Abort current search/update.
END: to exit search wizard.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing stations
Search/update station – manual search
Call TV menu.
Change, delete, move, rename, restore stations
➠ Change stations can also be called via the station list
(page 16).
34Select Settings,
6 go to the menu line below.
Call TV menu.
34Select Stations,
6 go to the menu line below.
34Select Settings,
6 go to the menu line below.
34Select Manual adjustment,
OK call input box.
34Select Stations,
6 go to the menu line below.
You can enter or edit the station data in the following
lines:
34Select Change stations,
OK call list of stations.
Manual adjustment
Change stations
Signal source
Channel
Frequency
Name
TV stand.
Col. standard
Antenna/cable (analogue)
S21
303.25 MHz
KIKA
B/G
DVB-T
DVB-C
D
Here you can move station, delete stations, restore stations you have
deleted and enter and change station names of analogue stations.
Change stations
1 ARD
2 ZDF
13 WDR 3
14 BR
3 SAT.1
4 D Vierte
5 RTL
6 VOX
7 S-RTL
15 HR
16 MDR 3
17 KIKA
18 PHOENIX
19 BR-ALPHA
20 3SAT
21 KABEL 1
100 Das Erste
101 ZDF
Autom.
END
Store
Search
INFO
8
N-TV
Or:
9 DSF
10 EinsPlus
11 9Live
12 RTL2
Blue button: Starts Search and searches for next station.
102 WDR Köln
P+ Page ↑↓
Select station
Restore stations
Move
END
0
-
9
Red button: Stores station.
P–
INFO
Delete
Rename
➠ Only stations for the selected signal source can be
saved which do not yet exist in the station list.
In this menu you can delete, move, rename or restore
stations.
➠ Stations which already exist in the station list for the
selected signal source are displayed with their station
numbers and names on a grey background. These
stations can only be overwritten with the red button.
346or numeric buttons:
to select the appropriate station.
Scroll with P+/P– if necessary.
Explanations of some search settings:
Delete station
Various settings are possible depending on the selected signal source.
Some settings have already been explained in the initial installation (see
page 12 onwards).
Red button: Activates Delete station.
6mark several stations if needed,
OK to execute the delete.
Signal source Selection of range in which you want to search for the
station.
Move station / Change order
➠ Stations can only be resorted within their signal source
Channel Direct input of channel.
Frequency Direct input of station frequency.
block.
TV stand. Input of station TV standard.
Yellow button: Activates Move station.
6mark several stations if needed,
OK to end marking.
(B/G, I, L, D/K, M, N) Ask your dealer in this regard.
Col. standard Input of the station colour standard.
(PAL, SECAM, NTSC-V, PAL60, Autom.)
Ask your dealer in this regard.
6Selection insert position from which the marked
stations are to be inserted,
OK to execute the move.
23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing stations
Rename station
Put together – change favourites lists
➠
DVB stations for which the station name is also broadcast
cannot be renamed. In this case, the Rename function
is hidden.
Each favourites list can contain up to 99 stations. You can put together
the favourites lists to suit your requirements (e.g. topic lists). Other persons
using this TV set can create their own favourites lists.
The favourites lists also have the advantage that the stations of different
signal sources can be stored in the order you wish.
Blue button: Activates Rename station.
Under the 1st letter of the name you will see a line indi-
cating the current input position.
➠ Change favourites lists can also be called via the
favourites list (page 17).
4 Input position right (also for spaces).
3 Input position left deletes the preceding character.
Call TV menu.
Enter the letters one after another with the numeric
buttons on the remote control. Like using a mobile phone
keypad, press a numeric button until the desired character
appears. The available letters are printed respectively on
the buttons. Different special characters can be selected
with button 1.
34Select Settings,
6 go to the menu line below.
34Select Stations,
6 go to the menu line below.
34Mark Select/change favourites,
OK calls list of all stations and last active favourites list.
Green button: Switch upper/lower case letters.
OK to save new name.
Select/change favourites
All stations
Stations of Favourites 1
OK
1
2
3
4
5
6
7
8
9
Das Erste
1
2
3
4
5
6
7
8
9
Das Erste
ZDF
WDR Köln
Bayrisches FS
hr-fernsehen
Phoenix
BR-alpha
3sat
EinsExtra
ZDF
WDR Köln
Bayrisches FS
hr-fernsehen
Phoenix
BR-alpha
3sat
EinsExtra
Restore stations
Stations which have been deleted from the station list can be restored.
➠ The restore list is empty if no stations have been deleted
10 EinsFestival
11 SAT.1
12 RTL
10 EinsFestival
11 SAT.1
12 RTL
yet.
END
Green button: Activates Restore stations.
0
-
9
Select station
Clear favourite list
Next favourite list
Change sorting
P+
P–
INFO
Page ↑↓
Change stations
Restore stations
Green button: Select the next favourites list.
3sat
KIKA
ZDF
ZDFinfokanal
ZDFdokukanal
ZDFinfokanal
Eurosport
NONAME
RTL
Das Erste
Das Vierte
RTL Television
9Live
WDR Köln
VOX
ProSieben
Super RTL
n-tv
OK
Rename favourites list
➠ Favourites list (right column) must be selected.
If not, change the list with 4.
Phoenix
BRalpha
NDR FS HH
DSF
RTL2
KABEL1
Blue button: Activates Rename favourites list.
OK
END
Restore
Cancel restore
P+ Page ↑↓
INFO
P–
Numeric buttons: Enter new name (same procedure as
for rename station, see left column).
634Select station,
OK station is restored.
OK to save new name.
The restored station is sorted in according to its signal
source at the end of the respective signal block
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing stations
Add station to favourites list
Move / change order of stations in the favourites list
➠ Favourites list (right column) must be selected.
3 Go to the left column (all stations).
If not, change the list with 4.
6mark station to be moved.
P+/P– Scroll in the pages of the station list if necessary.
Yellow button: Activates Move station.
6Mark station or select station with the numeric
buttons (for alphabetical station sorting enter the
initial letter) which is to be transferred as a
favourite to the favourites list.
6Select insertion position at which the marked
station is to be inserted.
The insertion position can also be selected with
the numeric buttons.
OK transfers the station to the favourites list.
The new station is inserted at the end of the
favourites list.
OK to execute the move.
Select/change favourites
All stations
Select/change favourites
All stations
Stations of Favourites 1
Stations of Favourites 1
21 EinsPlus
1
2
3
4
5
6
7
8
9
Das Erste
ZDF
WDR Köln
Bayrisches FS
arte
21 EinsPlus
13 BR-alpha
14 3sat
22 ZDFinfokanal
23 ZDFdokukanal
24 ZDFtheaterkan
25 MDR FERNSEH
26 rbb Berlin
22 ZDFinfokanal
23 ZDFdokukanal
24 ZDFtheaterkan
25 MDR FERNSEH
26 rbb Berlin
15 EinsExtra
16 EinsFestival
17 SAT.1
OK
Phoenix
BR-alpha
3sat
18 RTL
27 rbb Brandenburg
28 arte
29 KiKa
30 NDR FS HH
31 NDR FS MV
32 NDR FS NDS
27 rbb Brandenburg
28 arte
29 KiKa
30 NDR FS HH
31 NDR FS MV
32 NDR FS NDS
19 arte
EinsExtra
OK
10 EinsFestival
11 SAT.1
12 RTL
0
-
9
END
Select insert position
Execute move
Select station
Cancel move
OK
END
Adopt to favourite list
Select station
Clear favourite lsit
OK
0
-
9
Next favourite list
Change sorting
P+ Page ↑↓
INFO
P–
P+
P–
INFO
Page ↑↓
Proceed in the same manner with additional stations.
Delete station from favourites list
➠ Favourites list (right column) must be selected.
If not, change the list with 4.
6mark station to be deleted.
OK removes the marked station from the favourites list.
or:
Red button: Activates Clear favourite list.
OK confirms clear list.
25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture in Picture
Select the PIP picture
➠ The frame is green,
Picture in Picture (PIP)
The concurrent display of two different images is referred to as Picture
in Picture.
if not, press the green button.
Select the station as usual.
➠
➠
➠
A concurrent representation of two HDTV signals is not possible.
A concurrent representation of two coded stations is not possible.
Picture change and station selection is restricted during recording.
Your TV set differentiates two PIP types:
Split Screen In this case the screen is divided in the middle and the
additonal PIP image is shown on the right side of the
screen. Both images are compressed horizontally and
each gets half of the screen.
Small PIP In this case a small PIP image is inserted in the TV picture.
2
ZDF
17.00 - 18.30 Flora & Fauna
Start and end Picture in Picture mode
Select the station for the main picture
Show/hide PIP.
➠ The frame is white,
A green frame indicates that the station selection affects
the PIP, A white frame means that the operation affects
the main picture.
if not, press the green button.
Select the station as usual.
PIP as freeze picture
➠ The frame is green,
if not, press the green button.
Red button: Freeze picture in PIP on / off.
Swap contents of PIP and main picture
1
ARD
➠ The frame is green,
17.30 - 20.00 Toskana
if not, press the green button.
Yellow button: Swaps contents.
Scan station in the PIP
➠ The frame is green,
if not, press the green button.
Blue button: Start / stop Scan station.
The frame turns blue,
the stations now change automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture in Picture
Change position of the PIP
➠ Other than the status line, which may possibly be
Configure Picture in Picture (PIP) mode
In the PIP menu, you can set the PIP type (split screen or small PIP) and
the position of the small picture.
displayed, no other display is shown on the screen:
Start PIP menu
➠ PIP mode started,
if not, press PIP button.
➠ The frame is green,
if not, press the green button.
Call the PIP menu.
634Move the PIP into a corner of the screen.
Moving the small picture is possible if there is a green,
white and blue frame.
The position of the small picture can also be selected
under Position in the PIP menu.
TV menu
Settings
INFO
END
PIP
Type
mall PIP
Split screen
Sm
Switch to Split Screen
➠ PIP menu open.
Switch over to small picture
➠ PIP menu open.
TV menu
Settings
PIP
INFO
END
Type
Split screen
TV menu
Settings
PIP
mall PIP
Sm
INFO
END
Type
Small PIP
34Select Type,
Split screen
6 go to the menu line below.
34Select Type,
6 go to the menu line below.
34Select Split Screen.
34Select Small PIP.
27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic Programme Guide
Adjusting the programme list
➠ Selection is at the top in the defaults,
Electronic Programme Guide – EPG
EPG stands for Electronic Programme Guide and provides you with
on-screen programme details. With the system, as with a printed pro-
gramme guide, you can learn about the current programme. In addition
programmes can be sorted according to certain topics, memorised, and
also recordings can be programmed.
if not, press the blue button.
6Select Date, Time, Station or Topics.
34Select defaults within the respective line.
EPG (Electronic Programme Guide)
Mon 31.07./16.05
Starting and ending EPG
Date
Time
Mon 31.07
now
Tue 01.08. Wed 02.08. Thu 03.08.
F
Station
Topics
all
all
Switching EPG on / off
15:57-16:59 arte
16:00-16:15 MDR FERN... Hier ab vier
16:00-16:10 EinsExtra
16:00-17:15 SAT.1
16:00-16:30 ProSieben
16:00-16:55 ZDFtheater... Waschtag
16:05-17:00 Bayrische...
16:05-16:45 KiKa
Charmed - Zauberhafte Hexen
EPG (Electronic Programme Guide)
Mon 31.07
Mon 31.07./16:05
EinsExtra Aktuell
Richter Hold
M. Asam - Mode
Date
Time
Station
Topics
now
soon
17:00
18:00
19:00
20
all
all
2 ZDF
Wir in Bayern
Skippy, der Buschpilot
Star Trek - Das nächste Jah...
OK
15:57-16:59 arte
Charmed - Zauberhafte Hexen
16:00-16:15 MDR FERN... Hier ab vier
16:05-17:00 KABEL1
16:00-16:10 EinsExtra
16:00-17:15 SAT.1
EinsExtra Aktuell
Richter Hold
Charmed - Zauberhafte Hexen
16:00-16:30 ProSieben
M. Asam - Mode
END
16:00-16:55 ZDFtheater... Waschtag
2 ZDF
MENU
Change to programme list
16:05-17:00 Bayrische...
16:05-16:45 KiKa
Wir in Bayern
Skippy, der Buschpilot
16:05-17:00 KABEL1
Star Trek - Das nächste Jah...
Charmed - Zauberhafte Hexen
Example If you are looking for the next news broadcast, select
today's date, for time, select soon, for station select all,
and for topics, select News. Then you get a list of all news
programmes in the programme list below.
OK
TEXT
P+
P–
END
Detail
Page ↑↓
View
Record
Select date, ... , topics
MENU
Select time
0
-
9
The first time you start EPG a wizard becomes active
(not for DVB), and it guides you through the setup. Then
execute the data capture (see next page).
Time entry If the line Time is selected, then you can enter the time
after which the programmes will be displayed via the
numeric buttons of the remote control. Always enter
four digits, e.g. 0900 for 9.00 in the morning.
The display of the programme guide is divided into two
branches. The lower programme list is influenced by the
upper default lines.
Favourites If a favourites list has been selected in the Station line,
only the programmes of stations in the favourites list are
displayed in the programme list.
Blue button: Switches between the upper default lines
date, ..., topics and the lower programme list.
Tip Before pressing the blue button to leave the upper selec-
tion lines, select one of the preceding lines. If you then
switch back to the programme list, you can change this
menu line with 34, without having to leave the pro-
gramme list. If you have marked Time, then you can enter
the time, after which the programmes will be displayed,
with the numeric buttons of the remote control.
Switching and memorizing with the programme list
➠ In the program list first all currently running programmes
are listed.
➠ You are in the lower programme list,
if not, press the blue button.
Paging through the programme list
6Select station,
OK view / memorise.
P+/P– paging backwards / forwards.
View The programme is in progress the TV set switches to the
marked programme.
In the entries for Date and Time, you will see changes in
time as well as in date when paging.
Memorise The programme has not started yet and is memorised. A
appears in front of the programme. The TV set switch-
es over automatically to the beginning of the programme
or, if set in the menu (page 29) on from standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic Programme Guide
Calling additional information about the programmes
Station You can remove certain stations from the programme
selection guide. These stations must be deactivated in the Station
selection. First, all stations for which programme infor-
mation can be provided are marked with a . Stations
without a are not included in the programme guide.
➠ Brief information about many programmes is displayed
below the programme list of the broadcasts.
You can call detailed information with the TEXT button if
this function is offered by the TEXT icon in the lower
left.
Marking the stations according to reception ranges:
analogue stations via antenna/cable, for which the
current provider supplies data.
Programming a recording for a recorder
digital terrestrial stations DVB-T,
digital cable stations DVB-C,
digitale satellite stations DVB-S (1.
➠ Selection is in the lower programme list,
if not, press the blue button.
6Mark the desired programme.
Data capture If you want to use EPG for analogue and digital stations,
select on (for DVB + analogue). If you want to use EPG
and only have DVB reception, select on (only for DVB).
If you are not using EPG and therefore do not want to
receive any EPG data, select off.
Red button: Starts recording wizard.
Change or confirm timer data if necessary (see page 46,
the direct recording path).
Then a red dot will be displayed in front of this programme
as an identification.
After making changes in the EPG menu, or each time the
mains switch has been switched off, the EPG data must
first be captured. To do this, switch on the device and
select (for analogue stations) the station that you have
defined as provider, and let the TV set run for about 1
hour with the selected station. Or switch the TV set to
standby mode. After 2 minutes the display on the TV
lights orange and the EPG data capture begins. When
the data capture process has concluded the display will
return to red. The data capture process is usually per-
formed between 2:00 am and 5:00 am, when the TV
set is in standby mode.
Red button: Deletes the already programmed recording
of the red marked programme from the timer.
If the timer data have been transferred to an external
recorder, then the timer must also be deleted there.
Configuring EPG
Start the EPG menu
➠ EPG mode is started,
if not, press the EPG button.
Switch on TV If the TV set is switched on, the TV set will switch over to
when marked these stations, if there are any memorised programmes.
If the TV set is in standby mode when a memorised pro-
gramme begins, then you can specify here whether the
set should be turned on in this case. If you have set "yes"
in the menu, the TV set will be switched on. If you are
not in at the time, a safety prompt makes sure that the
TV switches off automatically after 5 minutes without
your acknowledgement.
Call the EPG menu.
INFO
END
EPG menu
Station selection
OK
rovider
Data capture
Switch on TV when marked
Sel
Settings in the EPG menu:
Select provider, Station selection, Data capture, Switch on
TV when marked.
Explanations of setting possibilities in the EPG menu:
Select In analogue TV reception, there are possibly different
Provider providers who broadcast the EPG data for certain sta-
tion packages. To get another range of stations, you can
change the provider with the Provider selection. If the
provider you are looking for is not in the list, then use the
yellow button to perform a Provider search.
(1 Digital twin satellite tune optionally available as an upgrade kit
(see accessories, page 55).
The stations offered by the provider will be displayed
in a list.
29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Additional page selection possibilities
Teletext
Your TV set supports the two operating systems TOP Text and FLOF.
Up to 2,000 pages are stored so that you have quick access.
1st possibility:
Call overview page 100.
Starting and ending Teletext
2nd possibility:
Switching Teletext on / off.
100 100 ARDtext
Directly enter the page number.
Do 07. 09. 06
14 : 14 : 42
3rd possibility:
ARD Text
➠ The page includes 3-digit page numbers.
Politik: Die neuen Gesetzesentwürfe . . . . . . . . . . . . 120
Wird auch der Nahverkehr teurer?. . . . . . . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . . . . . . . 122
Tote bei Zugunglück in Schweden
.
. . . . . . . . . . . . 532
6mark desired page number.
Tennis: Auftaktmatch wurde abgebrochen . . . . . . . 204
Formel 1: Neues Reglement für Motoren. . . . . . . . . 213
Fussball: Heimsieg für den Meister . . . . . . . . . . . . 204
Tennis: Auftaktmatch wurde abgebrochen . . . . . . . 204
Formel 1: Neues Reglement für Motoren. . . . . . . . . 213
Fussball: Heimsieg für den Meister . . . . . . . . . . . . 204
13:00 ARD-Mittagsmagazin . . . . . . . . . . . . . . . . . 312
14:00 Tagesschau
13:00 ARD-Mittagsmagazin . . . . . . . . . . . . . . . . . 312
14:00 Tagesschau
Tagesschau . . . .
Wetter. . . . . . . . . .
Sport. . . . . . . . . . . 200/600 Lotto/Toto. . . . . . . 666
TV Guide . . . . . . . 300/400 Wirtschaft. . . . . . . 700
110/112 Kultur. . . . . . . . . . 500
170 Gesellschaft . . . . . 530
Tagesschau . . . .
Wetter. . . . . . . . . .
Sport. . . . . . . . . . . 200/600 Lotto/Toto. . . . . . . 666
TV Guide . . . . . . . 300/400 Wirtschaft. . . . . . . 700
110/112 Kultur. . . . . . . . . . 500
170 Gesellschaft . . . . . 530
–
+
Inhalt
tagesschau
–
+
Inhalt
tagesschau
Page selection
OK
Page selection
View
OK to call the page.
Page selection with the coloured buttons
Red button: back to the previously viewed page.
Green button: on to next page.
4th possibility:
➠ The page consists of several pages. This is shown by
the selection possibility in the last line.
TV Guide . . . . . . . 300/400 Wirtschaft. . . . . . . 700
Yellow button:to next topic.
Blue button: to next range of topics.
–
+
Inhalt
3
tagesschau
1
2
4
5
The coloured bars (for TOP) or the coloured text (for FLOF)
in the second to last line indicate which coloured buttons
you can use to page through topic areas and topics.
34Page through sub-pages.
Call TOP table
Teletext page displays
0 AV:
9:
➠ The table can only be called for stations with the TOP
Stop self changing pages.
operating system.
Enlarge page (press several times).
OK Call TOP table.
Wird auch der Nahverkehr teurer?. . . . . . . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . . . . . . . 122
TOP table
PIP button: Show / hide TV picture.
Tote bei Zugunglück in Schweden
.
. . . . . . . . . . . . 532
100 100 ARDtext
Do 07.09.06
14:14:42
ARD Text
Wetter
213
204
tagesschau Vorhersage
OK204
Wetter
Sport 1
Fußball
Staedte
Ballungsr.
ARD Text
312
Reise
Politik: Die neuen Gesetzesentwürfe.
.
.
.
.
.
.
.
.
.
120
121
122
532
TV Guide
Wird auch der Nahverkehr teurer?.
.
.
.
.
.
.
.
.
.
.
.
.
500
530
ARD heute
Australien: Keine Zugeständnisse
.
.
.
.
.
.
.
.
.
.
ARD morgen
Tote bei Zugunglück in Schweden
.
.
.
.
.
.
.
.
.
.
.
Kultur
Tennis: Auftaktmatch wurde abgebrochen
Formel 1: Neues Reglement für Motoren.
Fussball: Heimsieg für den Meister
.
.
.
204
213
204
weitere ...
.
.
.
.
.
.
.
.
.
.
OK
View
.
.
.
.
.
.
.
13:00 ARD-Mittagsmagazin
14:00 Tagesschau
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
312
6mark topic area,
34select topic column,
6select topic,
Tagesschau
.
.
.
110/112
170
200/600 Lotto/Toto.
300/400
Inhalt
Kultur
.
.
.
.
.
.
.
.
.
.
500
530
666
700
Wetter.
Sport.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Gesellschaft
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
TV Guide.
Wirtschaft.
.
.
.
.
.
–
+
tagesschau
Page selection
OK to call the page.
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Programming timer recordings via Teletext
Teletext menu
➠ Teletext is started,
In the Teletext menu you can, among other things, activate news, reveal
if not, press the TEXT button.
pages and configure the teletext with the Settings menu function.
Call the programme pages of the current station.
Change preset page numbers, see this page.
Starting the Teletext menu
➠ Teletext is started,
Green button: Go to the appropriate page.
if not, press the TEXT button.
Call the Teletext menu.
100 100 ARDtext
6Select the desired programme,
OK to programme the recording.
Do 07. 09. 06
14 : 14 : 42
Change the appropriate recording data in the following
menu Timer data if necessary (see also page 46, the direct
recording path).
ARD Text
Politik: Die neuen Gesetzesentwürfe . . . . . . . . . . . . 120
Wird auch der Nahverkehr teurer?. . . . . . . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . . . . . . . 122
Tote bei Zugunglück in Schweden
.
. . . . . . . . . . . . 532
Tennis: Auftaktmatch wurde abgebrochen . . . . . . . 204
Formel 1: Neues Reglement für Motoren. . . . . . . . . 213
Fussball: Heimsieg für den Meister . . . . . . . . . . . . 204
OK to confirm.
13:00 ARD-Mittagsmagazin . . . . . . . . . . . . . . . . . 312
14:00 Tagesschau
Tagesschau . . . .
Wetter. . . . . . . . . .
110/112 Kultur. . . . . . . . . . 500
170 Gesellschaft . . . . . 530
INFO
END
Teletext menu
Newsflash
OK
Reveal
Recording wizard Settings
Explanations of the Teletext menu functions:
Newsflash Shows current messages as screen insert, in the form of
subtitles, in current TV mode. Only possible for pages
which also broadcast news.
Reveal Shows concealed information, e.g. for quiz questions or
VPS times in the programme preview pages.
Recording A wizard for recording via teletext helps you programme
wizard a connected recorder, see also the left column.
Settings Other Teletext menu functions:
Preview pages Definition of the first Teletext programme preview page if
this deviates from the factory setting (page 301).
Sub-title pages Definition of the Teletext subtitle pages for every station
if this deviates from the factory setting (page 150).
Personal text Definition of up to six Teletext pages which can be called
pages later from a list in the Assist+ menu.
Character set Teletext character set can be switched to another lan-
guage.
HiText Improved graphic representation of the Teletext.
(Not offered by all stations.)
31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVB
Switch on the TV set.
Conditional Access Module (CA module)
The following dialogue appears:
In order to receive coded digital stations, a Conditional Access Module
(CA module) and a Smart Card must be inserted in the CI slot of your
TV set (see page 5).
Search wizard
END
Your TV set hast detected a new CA module. This requires a
station search for all new receivable station
Continue with OK
The CA module and the Smart Card are not part of the TV set's scope of
delivery. They are usually available from your dealer.
OK start the search wizard.
Check the recommended search routine parameters and
then start the search.
Inserting the Smart Card into the CA module
Push the Smart Card into the CA module as far as it goes so that the side
with the gold coloured contact chip is facing the side of the CA module
marked with the provider's logo. Note the direction of the arrow printed
on the Smart Card.
Replace the cover.
Calling CA module information
➠ This menu is only available for digital stations.
Call TV menu.
34Select Settings,
6 go to the menu line below.
34Select Miscellaneous,
6 go to the menu line below.
34Select CA module: xxx
(xxx corresponds to the CA module provider),
Inserting the CA module in the CI slot
OK to call information.
➠ Switch off the TV set's mains switch.
The content of this menu depends on the provider of the
CA module.
Remove the cover from the rear of the set.
Ejector
button
Removing the CA module
Cover
➠ Switch off the TV set's mains switch.
Remove the cover from the rear of the set.
Press in the ejector button on the appropriate module
drawer, the module is released.
Remove the module from the set.
Replace the cover.
Carefully insert the CA module in CI slot 1 or CI slot 2
with the contact side forward.
If you are standing in front of the TV set (display) then
the logo on the CA module must be pointing to the rear.
Do not use force. Make sure the module is not twisted
in the process.
If the CA module is correctly installed, the ejector button
protrudes a little further.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVB
6Select software type:
Software update
Select TV base software or
DVB software,
TV base software and DVB software
You can update your TV’s TV-Basic and DVB software. The latest software
versions are broadcast by satellite (1 (only Astra1 at the moment) or can
be installed in your set with a USB stick.
OK start search.
If new versions are available then a subsequent screen
message will be displayed.
Please contact your dealer for a software update via USB stick.
Automatic search for new software via satellite (1
Loading new software
➠ New software available via search.
The set automatically determines whether a new software version is
available per satellite during the night when the EPG data are updated.
However the TV set must remain in standby mode for this (do not switch
off the set with the mains switch).
➠
If a new TV and a new DVB software is available in the
automatic search for new software versions via satellite(1,
you can select the software type to be updated.
If a new software version has been found, the set informs you with an
on-screen message the next time it is switched on (see right column
– Loading new software).
Software update wizard
A new software is available.
TV base software:
current V2.1.0
new V2.1.1
Manual search for new software via USB /satellite (1
Please specify whether and, if so, when you want to load the new software.
If it is not automatically displayed that a new software is available when
switching on the set, you can also run a manual search.
The system first checks whether a software update is available on an inserted
USB stick. If not the system will search for an update via satellite(1.
Software update
Update options
OK
Load new software now
END
Load new software after switch off to standby
Keep current software
Proceed
Call TV menu.
OK
34Select Settings,
6 go to the menu line below.
6Select update option:
Load new software now
Load new software after switch off to standby
(update after switching off)
Keep current software (no update desired)
34Select Miscellaneous,
6 go to the menu line below.
34Select Software update.
OK calls software update wizard.
The software versions currently loaded in the set
are listed.
OK more or exit wizard.
OK start software update.
Software update wizard
Current TV base software:
Current DVB software:
A bar is displayed to inform you about the progress of the
load process. During the loading process do not switch
off your device via the mains switch! This may last up to
20 minutes. You will be informed when it is finished.
V2.1.0
V1.3.0
You can now search for new software. Please select the software type and
start the search with the
OK
button.
At the end of loading:
Turn off the TV set off with the mains switch and turn it
on again. This is not necessary when loading the software
with the update option Load new software after switch
off to standby mode.
Software update
Software type
TV base software
DVB software
END
OK
If a new software has not been updated via satellite (1,
you will be reminded of this several times when switching
on the set.
OK
Proceed
(1 Digital twin satellite tune optionally available as an upgrade kit
(see accessories, page 55).
33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
Setting the sound mode
Call Sound mode.
Radio mode
You can only receive radio stations via DVB.
Other settings as for TV mode (see page 18).
If you do not have DVB radio reception then you can play audio from an
external device via the TV set using the audio/AV inputs.
Switching the screen on/off
Radio mode on/off
Red button: Switch off the screen.
Radio mode on:
RADIO button on the remote control.
The LED display on the TV set changes from green to orange.
Switch on the screen with the remote control:
Red button or OK button.
or:
R on the TV set operating ring.
Switch on the screen on the TV set:
Press R on the TV set operating ring.
Radio: 102 BAYERN 1
Stereo 2
Changing stations when the screen is off
AUDIO DIGIT...
AUDIO IN2
AUDIO IN1
HDMI2/DVI
HDMI1/DVI
AVS
106 ANTENNE
107 DLR
108 DLF
109 BAYERN3
110 MDR INFO
111 MDR FIGA
112 NDR KULT
113 SWR1
114 SWR2
115 WDR3
116 WDR5
117 OESTER1
P+/P– or the numeric buttons of the remote control.
DVD-REC
DVD
or:
+ / – on the TV set operating ring.
101 B5 AKTL
102 BAYERN 1
103 BR4 KLSK
104 SUNSHINE
OK
18:00 - 18:10 Nachrichten
Radio menu
OK
TV
Switch to ...
Select station
Screen off/on
Scan stations
Previous station
Change sorting
MENU
0
-
9
In the Radio menu you can set the sound, search for and store radio
stations (automatically or manually), change stations and set switch-
off/alarm functions.
You will see an overview of radio stations.
The settings are made the same way they are made in TV mode.
If data are transmitted by the station, then time and title
of the station will be displayed in the station list.
Call radio menu
Radio mode off:
➠ Radio mode switched on,
if not, press the RADIO button.
TV button on the remote control.
Call the Radio menu.
or:
INFO
END
Radio menu
Sound
R on the TV set operating ring.
Stations
Timer functions
Sound mode
...
Explanation of the icons after the station name
EPG – Electronic Programme Guide (radio)
Digital DVB-T station (terrestrial via antenna)
Digital DVB-C station (via cable)
Digital DVB-S station (via satellite)
Coded station
For the DVB radio stations you can also use an electronic programme
guide, if the station that is currently active supplies data.
Starting and ending EPG
➠ Radio mode switched on,
if not, press the RADIO button.
Setting the volume
Switching EPG on / off
V+/V– volume louder / quieter.
The EPG functions in radio mode are similar to those in
TV mode. More information in this regard is available
starting on page 28.
Other sound settings are the same as for the volume setting
in TV mode (see page 18).
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
AV equipment
selection
Connection wizard
Device connection wizard
Specify all new AV devices to be connected and all connection changes to the
existing devices here.
Connecting additional devices to the TV set
New devices/modifications
AV equipment selection
DVD
The device connection wizard serves to connect new devices to the TV
set or make wiring changes.
DVD player
DVD •
VCR
DVD recorder
Video recorder
➠ New devices should not be connected until they have
SAT
Satellite receiver
SetTopBox/dBox
Decoder
Camcorder/camera
Other device(s) to AV1/2/S
Device to COMP.IN
Device to HDMI1/DVI
Device to HDMI2/DVI
STB
been registered in the connection wizard.
Decoder
Camera
AV
Call TV menu.
COMP.IN
HDMI/DVI
HDMI/DVI
END
34Select Connections,
6 go to the menu line below.
OK
Proceed
Connect/disconnect
Yellow button: Place a check mark after the devices to be
connected.
34Select New devices/modifications.
OK calls the wizard.
In the next step, the connection diagram shows how to
connect the new or preset devices to the rear of the TV
set (in this example the DVD player (DVD) to AV1, the DVD
recorder (DVD•) to AV2).
END: It is possible to run the wizard only partially at any
time.
You have to confirm changes on a page with OK.
Connection wizard
Connect the satellite dishes or cable/terrestrial antennas of your AV
equipment (recorder, decoder, ...) to the TV set according to the enclosed
operating manual. The connection wizard assists you when you connect your
equipment to the TV set via the AV sockets AV1, AV2 and AVS or via the
SD/HD-COMPONENT IN or HDMI1/2(DVI)* socket.
Signal type
New devices/modifications
Signal type at socket AV1
Automatic CVBS/YC
OK
END
CVBS
YC
OK
Proceed
Select the signal type of your set. Leave the setting on
automatic if you are not sure.
TV set
Connection
example of a
DVD recorder
END
OK
Proceed
ANT2
Follow the instructions on the TV set.
AUDIO
digital
In
The following illustrations provide an overview of the
possible options.
AV2
Connection
Connection wizard
Now the TV set assumes that you have connected the following equipment:
diagram
DVD
AV1
DVD
AVS
AV2
COMP. IN HDMI1 HDMI2
DVD recorder
TV
R
END
OK
Proceed
The connection diagram shows the devices that are cur-
rently configured. DVD player on AV1 and DVD recorder
on AV2 are factory pre-sets.
Hint: Use Euro AV cable with angled connectors.
continued on the next page
Ž
35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Explanations of important settings
Proceed as follows (see also the operating manual of the connected
recorder):
Signal type The signal type of the devices that can be connected can
vary greatly. If you are not sure, leave the setting for Signal
on Automamtic CVBS/YC (e.g. for DVD Player/Recorder) or
Autom.-VHS/SVHS (e.g. video recorder), otherwise select
the right signal type. See the glossary on page 56 for
further information.
➠ Insert a DVD/cassette and press play.
Call AV selection.
34Select VIDEO,
OK to switch over.
Immediate If the picture from a connected device is to be displayed
playback immediately on the TV set during playback, select yes. A
switching voltage is allowed so that you do not have to
switch over manually to see the picture of the connected
device. (See the operating manual of the connected re-
production device.)
If no picture is visible on the TV screen during recorder
playback, you have to search for the station or set it
manually.
To avoid finding "normal" television stations when search-
ing for stations, unplug the antenna plug on the recorder's
antenna input temporarily (the cable for the antenna
system).
When playing from Digital Link Plus devices, the picture is
always displayed immediately, regardless of the setting.
Assign digital Select the AV socket to which the device of which you
audio input want to hear the digital sound is connected. Connect the
digital output of the external device to the digital input
of the TV set (see page 45). If a device with digital audio
is not connected then select no.
Manual station search:
➠ VIDEO is selected by the AV selection.
Call TV menu.
34Select Settings,
6 go to the menu line below.
Connection possibilities for a DVD/video recorder
There are two possibilities for viewing the picture of the connected
recorder:
34Select Stations,
6 go to the menu line below.
1. Use appropriate cables in conjunction with the connections assigned
by the connection wizard. This always offers the best quality and
the greatest convenience, such as automatic switch over when
playing from a connected device.
34Select Manual adjustment,
OK to call other settings.
For Channel enter "E30".
2. You are using the antenna connection between recorder and TV
device. However this reduces the quality.
Blue button: Start search.
When you have found the recorder station:
Red button: Overwrite station slot.
Exit TV menu.
Connecting antenna to the DVD/video recorder
If you want to receive and record analogue stations, it is useful to loop
the recorder into the antenna cable; as shown in the connection example
on page 35 bottom right.
If the antenna connection is also used for the playback because the
devicers are not connected by EURO-AV cables, you have to search for
the recorder station and save it in the TV set.
Re-connect the antenna plug that you temporarily
unplugged.
If disturbances should now occur because a TV station
is being broadcast on the same channel as the station
of the recorder, then you must change the transmission
channel on the recorder and scan for the recorder again
on the TV set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Connecting devices to the HDMI (DVI)
connections and playback
Connecting devices to the PC IN connection
and playback
The HDMI connections (High Definition Multimedia In-
terface) permit digital video and audio transmission via
a connection cable from a player, e.g. from the Loewe
Centros 2102/2172 HD DVD recorder.
You can connect a PC or a SetTopBox (STB) to the PC
IN socket and thus use the screen of the TV set as an
output device.
➠ When connecting the TV set to a PC, first set your PC to one of the
The digital picture and sound data are transmitted without data compres-
sion and therefore lose none of their quality. Analogue/digital conversion
is no longer necessary in the connected devices, which also would result
in quality losses.
following screen resolutions:
800 x 600 60 Hz (SVGA)
1280 x 1024 60 Hz (SXGA)
1024 x 768 60 Hz (XGA)
1360 x 768 60 Hz (WXGA)
➠ When connecting a SetTopBox set the following screen resolutions
Using a DVI/HDMI adapter cable, the digital video signals of a DVI player
can also be played via the compatible HDMI connection. The sound must
be fed in additionally.
according to the possibilities of the SetTopBox:
SDTV:
720 x 576i
720 x 576p
720 x 480i
720 x 480p
HDMI and DVI both use the same copy protection method HDCP.
HDTV:
1280 x 720p
1920 x 1080i
Connecting the device
Connecting the device
Call TV menu.
Connect the device to the PC IN socket of the TV set via
the VGA cable. See page 38 for the sound connection.
34Select Connections,
6 go to the menu line below.
Registration in the connection wizard is not necessary.
34Select New devices/modifications.
Playback from the device
OK calls the wizard.
Call AV selection.
OK Go to the AV equipment selection menu.
6Select device on HDMI1/DVI or HDMI2/DVI.
AV selection
OK
AVS
PC IN
HDMI1/DVI HDMI2/DVI
COMP. IN
VIDEO
Yellow button: Activate HDMI1/DVI or HDMI2/DVI.
34Select PC IN socket,
OK to switch over.
Connect the device by an HDMI cable (type A, 19 pole)
to the HDMI1/DVI or HDMI2/DVI socket of the TV set.
Adapting the geometry (only possible with certain signals)
This is where the picture can be properly positioned and the position
of the picture (horizontal and vertical) can be moved so that it fills the
entire screen.
If a DVI/HDMI adapter cable is used, the appropriate
sound can be fed in via the audio input socket AUDIO IN2
(analogue) or AUDIO DIGITAL IN (digital) on the TV set.
See also page 45.
Call TV menu.
Playback from the device
34Selecting and adjusting the Geometry.
Call AV selection.
Setting the colour standard (only possible with certain signals)
AV selection
OK
VGA
HDMI1/DVI
HDMI2/DVI
COMP. IN
VIDEO
VCR
DVD
Call TV menu.
34Select HDMI1/DVI or HDMI2/DVI socket,
OK to switch over.
34Select Picture,
6 go to the menu line below.
34Select and set colour standard:
Start playback on the connected device.
The best possible format for the picture will be detected
and set automatically.
for PCs: RGB,
für STB: Ycc (rare: Ypp or RGB)
If the wrong standard is set then the colours will not be
displayed correctly.
37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Connecting the audio signal from the PC or from the SetTopBox
Analogue audio signal:
The sound is played over the speakers of the TV set (only
with connected TV speakers) or over a speaker system.
Alternatively, connect the digital audio output of the exter-
nal device to the AUDIO DIGITAL IN socket of the TV set.
Connect the analogue audio signal from the PC or the
SetTopBox via stereo cable to the AUDIO IN2 jack on the
TV set.
Call TV menu.
The sound is played via the speakers connected to the
TV set or a speaker system.
34Select Connections,
6 go to the menu line below.
Digital audio signal:
34Select New devices/modifications.
➠ An external digital audio signal can be reproduced via
the integrated Dolby Digital Decoder or via an externally
connected digital audio amplifier.
OK calls the wizard.
OK Go to the AV equipment selection menu.
6Select device at COMP.IN.
Connect the digital audio signal from the PC or the
SetTop-Box via a simple cinch cable to the AUDIO DIGITAL
IN socket on the TV set.
Yellow button: Activate COMP. IN.
Leave the signal type at socket COMP. IN in the connection
The digital audio input can be assigned to the PC IN socket
by the TV menu → Connections → Miscellaneous → Assign
digital audio input, see page 45.
wizard on Automatic for the time being.
If necessary change it to: SDTV, HDTV or ProScan.
(Additional information is available in the operating
manual for the connected device.)
For an external digital audio amplifier:
➠ External audio amplifier is already set in the sound
In an analogue audio connection, the sound is auto-
matically played over the speakers of the TV set (only if
TV speakers are connected) or over a speaker system.
components wizard (see page 44).
Feed the digital audio signal of the AUDIO DIGITAL OUT
socket on the TV set to the external amplifier.
A digital audio signal must be assigned via the TV menu
→ Connections → Miscellaneous → Assign digital audio
input to the COMP. IN socket, see page 45.
Connecting devices to the Component IN
connection and playback
Playback from the device
DVD players/recorders with component video connections
can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD-
COMPONENT) of the TV set instead of to the EURO AV
sockets.
Call AV selection.
AV selection
OK
MI2/DVI
COMP. IN
VIDEO
VCR
DVD
AVS
PC IN
HDMI1
The connecting cable with three cinch plugs transmits the picture in-
formation in better quality than is transmitted by a EURO AV cable. You
need an additional cable for audio transmission.
34Select COMP. IN socket,
OK to switch over.
Adapting the geometry (only possible with certain signals)
Connecting the device
This is where the picture can be properly positioned and the position
of the picture (horizontal and vertical) can be moved so that it fills the
entire screen.
Connect the component video outputs of the external
device via a triple cinch cable to the Cb/Pb Cr/Pr Y sockets
on the TV set.
Call TV menu.
Connect the analogue audio outputs of the external
device to the AUDIO IN1 L/R sockets on the TV set.
34Select and adapt the Geometry.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Sound components wizard
The sound components wizard helps you to configure the components
used to play the TV sound.
Depending on what you want to use, active speakers, speaker systems
and analogue and digital HiFi/AV amplifiers can be configured.
The sound components wizard is set to TV speakers at the factory.
Integrated Dolby Digital Decoder
Your TV set is equipped with an integrated Dolby Digital Decoder. This
system has also been introduced to the DVD video range and digital TV
stations can also broadcast in digital multi-channel sound.
For playback of 5 audio channels the surround sound is reinforced by the
deepest frequencies from the subwoofer channel (SUB), (5.1 reproduction
= 5 audio channels and 1 subwoofer). All 5 audio channels are reproduced
with the full frequency range from 20- 20,000 hertz and generate the
original theatre effect.
The Dolby Digital Decoder also decodes dts, MPEG and the analogue
Dolby Pro Logic and Dolby Pro Logic II signals, regardless of whether
the audio signal is transmitted by an external device or received by the
TV set.
DVDs or CDs with PCM coded audio format are also decoded by the
Dolby Digital Decoder. The CD/DVD player must be connected via a
coaxial, digital connection to the digital input AUDIO DIGITAL IN for this
(see page 45).
The audio signals decoded by the Dolby Digital Decoder are output via
the AUDIO LINK interface. You can connect a speaker system such as
the Loewe "Individual Sound" (see page 40) or active speakers (see page
41) to the AUDIO LINK interface and configure these with the sound
components wizard.
Settings for speaker systems and active speakers which are connected via
the AUDIO LINK interface to the Dolby Digital Decoder of the TV set:
• Register speaker (system) or active speaker.
• Setting of the lower limit frequency of the speakers.
• Setting of the distances between listener and speakers.
• Level settings for the speakers.
• Setting of the phase position for the subwoofer channel.
39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Connecting
Speaker system Loewe Individual Sound on
the Dolby Digital Decoder of the TV set
Before connecting any devices ensure that they are switched off or
unplug their mains plug.
Subwoofer without AUDIO LINK interface:
Setup
Plug the adapter cable to the AUDIO LINK interface of the TV set. Connect
the cinch connections of the adapter cable to the 6-pin cinch connections
of the subwoofer. Use the cinch cable which comes with the subwoofer
for this.
The arrangement of speakers and TV set can look like the illustration
below:
The front and surround speakers should be installed symmetrically to the
TV set and to your sitting position.
The cubic plug cable connects the master connection on the subwoofer
to the cubic plug of the adapter cable.
You can place the subwoofer anywhere on the floor. We recommend
placing it in front asymmetrically next to the TV set.
The adapter and cubic plug cable are available from your dealer (see
Accessories, page 55).
The TV speakers are used as center speakers.
For the settings in the sound components wizard enter the distances of
the centre speaker, and the front and surround speakers to your sitting
position. This guarantees a natural spatial image of the sound.
Subwoofer with AUDIO LINK interface:
The subwoofer is connected to the TV set via the AUDIO LINK interface. Use
the AUDIO LINK cable which comes with the subwoofer for this (illustrated
by the grey dotted line in the figure).
Individual Sound (subwoofer)
ON
Power OUT
R
L
Surr.
OFF
R
C
L
Front
Bass Intensity
TV speaker
as Center.
Min.
0
Max.
Phase
Front
Left
Front
Right
Line IN
180
Right Subw. Left
Surr.
Front
Right Center Left
.
230V~50/60Hz
Master
cubic plug
cable
Subwoofer
SR
R
SR
R
adapter cable
(subwoofer without
AUDIO LINK)
C
C
AUDIO LINK cable
(subwoofer with AUDIO LINK)
SUB
SUB
L
L
6-pole cinch
cable
SL
SL
Surround
Right
Surround
Left
TV set
Setup example for Loewe Individual Sound
Connecting Loewe Individual Sound (Subwoofer) to the TV set
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Connecting other speaker systems or active
speakers to the Dolby Digital Decoder
Adjusting the speaker system
Calling the sound components wizard
If you want to use another similar speaker system or active speakers,
you can connect these to the AUDIO LINK interface of the TV set with
an adapter cable.
➠ In normal TV mode, without other displays.
Call TV menu.
The adapter cable is available from your dealer (see Accessories, page 55).
34Select Connections,
6 go to the menu line below.
Connecting
34Select Sound components,
OK calls the sound components wizard.
Before connecting any devices ensure that they are switched off or
unplug their mains plug.
Sound components wizard
Plug the adapter cable into the AUDIO LINK interface of the TV set. Con-
nect the cinch connections of the adapter cable to the connections of
the corresponding active speakers.
Please specify here via which sound components you want to listen to your
TV sound. If you select a "Speaker system", this must be connected to the
AUDIO LINK socket on the back of the TV set (with an additional adapter if
necessary).
If your TV has no built-in speakers, the sections relating to "TV speakers“ may
not be selected.
The cinch connections of the adapter cable are labelled:
R
L
for front right
for front left
Sound components
Sound playback via ...
C
for centre
SR
SL
for surround right
for surround left
TV speakers
Speakers system
HiFi/AV amplifier
OK
END
HiFi/AV amplifier or TV speaker (switchable)
SUB for subwoofer
OK
Proceed
The connections on the adapter cable are preamplifier outputs. Therefore,
only active speakers may be connected directly to the adapter cable.
Sound playback via ... speakers system
Enter here that you want to hear the TV sound over a speaker system.
If you connect active speakers, please use the setting Speakers system.
Front
Right
Front
Left
Centre
6Mark Speakers system,
Subwoofer
OK to continue.
Sound components wizard
Please specify whether you want to change the illustrated setting of your
speakers system or whether all existing settings are to be reset to the values
of the delivery state.
Components
Distances
Level
TV
TV
TV
TV
TV
TV
0dB
0dB
4,0m
4,0m
Surround
Left
Surround
Right
Sound components
Speakers system
Configuration/modification
OK
Reset to factory settings
END
OK
Proceed
Adapter cable
If nothing has been set yet then the factory values will
be displayed, otherwise the values last set will be
displayed.
TV set
continued on the next page
Connection of active speakers to the TV set
Ž
41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
If you want to set new sound components or change
them:
➠ Select the start value of the frequency response of the
speakers for the right setting (e.g. 50Hz for the
specification "Frequency response 50-20.000Hz"). See
the technical data of the speakers for the value.
34Select Configuration/modification,
OK calls the selection, whether complete, partial or
new set-up.
➠ You can replace the external front speakers by the TV
speakers if necessary. In this case, select TV speakers.
Then transmit the sound of the front speakers.
Sound components wizard
Please specify here whether you want to completely reconfigure a speakers
system or whether you want to limit the configuration to changing the
speaker connections, the speaker distances from the listening position or
the individual speaker levels in relation to each other.
OK continue to connect and set the surround speakers.
34Select yes for external speakers.
➠ If no surround speakers are connected, these can be
Sound components
Configuration/modification of speaker system
Complete
simulated using the front and centre speakers.
OK
Connections only
Distances only
Levels only
6 Go to the menu line below and
34set the lower limit frequency of the surround
speakers in 10 Hz steps.
END
OK
Proceed
➠ Select the start value of the frequency response of the
6Select Complete,
OK continue to connect and set the front speakers.
speakers for the right setting.
Sound components wizard
Please specify here whether you want to connect
external front speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
OK continue to connect and set the centre speaker.
40Hz
40Hz
34Select whether the TV speakers or an External
speaker is to reproduce the centre sound or no if
no centre speaker is connected.
➠ If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
Sound components
Connect front speakers
peakers External speakers
6 for External speakers go to the menu line below
and
TV spe
40 Hz
34set the lower limit frequency of the centre speaker
OK
END
Proceed
in 10 Hz steps.
34Select External speakers,
6 go to the menu line below and
34set the lower limit frequency of the front speakers
➠ Select the start value of the frequency response of the
speakers for the right setting.
in 10 Hz steps.
OK continue to connect the Subwoofer.
Sound components wizard
Please specify here whether you want to connect
external front speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
34yes is the selection for subwoofer.
70Hz
70Hz
➠ If no subwoofer is connected, the front speakers also
transmit the sound parts intended for the subwoofer
as far as possible additionally.
Sound components
Connect front speakers
External speakers
70 Hz
OK
END
Proceed
continued on the next page
Ž
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
OK continue to set the
OK continue to Subwoofer phase.
Distance to left front speaker.
Sound components wizard
Here you can reverse the phase of your subwoofer. Test both values in music
reproduction and then select the one with which you get a better bass
reproduction.
➠ Measure the distances from your sitting position to
the front, surround, and centre speakers respectively.
The Dolby Digital Decoder calculates the delay times
for the speaker signals from these so that they reach
the listener simultaneously.
Sound components wizard
Please enter the distance of the left front
speaker from your listening position here.
4,2m
1,0m
2,7m
4,0m
0,9m
Sound components
Subwoofer phase
0°
OK
180°
END
Proceed
Switch to a station with music with P+/P– or start playback
with music on a DVD player.
Sound components
Distance to left front speaker
4,2 m
34Test both values (0º and 180º) and select the one
END
for which the bass reproduction is clearer.
OK
Proceed
OK to confirm the setting and exit the wizard.
34Set the distance between the left front speaker
This ends the sound components wizard for connecting
and setting up a speakers system.
and your listening position in 10 cm steps.
OK continue respectively to the other speakers and
34adjust the distance.
➠ After setting the distance for the centre speaker ...
OK continue to Adjust speaker level.
Sound components wizard
You hear a sound from every speaker one after
another. But you can also select the speakers
manually with the menu control buttons up/down.
Set the volume for the respectively active speaker
shown in blue so that you get approximately the
same volume impression from all the speakers.
0dB
0dB
0dB
0dB
Sound components
Adjust speaker level
END
0 dB
OK
Proceed
Preceding/next loudspeaker
34Adjust the volume for each speaker.
6Select speakers manually.
➠
For balanced audio reproduction all speakers should be
set at the same volume level. A noise signal will be
reproduced automatically on each speaker in succession.
From your sitting position adjust each speaker to the
same volume.
43 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Connecting digital audio amplifiers
Continuation of the left column above ...
Connecting audio amplifiers
The sound components wizard permits configuration of different audio
amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM).
See the operating manual of the audio amplifier for more information.
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO
DIGITAL OUT with the digital audio input of the amplifier
via a cinch cable:
Call TV menu.
34Select Connections,
6 go to the menu line below.
TV set
34Select Sound components.
OK calls the sound components wizard
6Mark the HiFi/AV amplifier.
AUDIO DIGITAL OUT
PREOUT
AUX1 INAUX OUT AUX
2
FL
SL
C
FR
L
L
DIGITAL
IN
Sound components
Sound playback via ...
TV speakers
DIGITAL
OUT
SUB
SR
R
R
Speakers system
HiFi/AV amplifier
Digital amplifier
END
OK
HiFi/AV amplifier or TV speakers (switchable)
OK
Proceed
Sound formats, amplifier type and other settings, see
explanations of the setting possibilities.
OK to continue.
34Select Digital audio transmission.
Continue, depending on the amplifier, see right column.
Connecting analogue audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select no.
Explanations of the setting possibilities:
Connect the analogue audio output of the TV device
AUDIO OUT L/R via a stereo cinch cable to the analogue
audio input of the amplifier:
HiFi/AV Select the setting when an amplifier is connected and the
amplifier TV speakers are not used.
HiFi/AV Select the setting when an amplifier is connected and the
amplifier or TV TV speakers are used. In the sound mode selection the
speakers audio reproduction can then be switched between the
(switchable) amplifier and the TV speakers.
TV set
AUDIO OUT L/R
Sound formats Specify sound formats which can be decoded with the
digital amplifier (see operating manual of the used ampli-
fier).
PREOUT
AUX1 INAUX OUT AUX
2
FL
SL
C
FR
L
L
DIGITAL
IN
DIGITAL
OUT
Type of Select either stereo or surround amplifier.
amplifier
SUB
SR
R
R
Analog amplifier
TV loudsp. as For every connected surround amplifier, select whether
centre speaker the TV loudspeakers are to be used as centre speaker.
For selecting the amplifier type and making other settings,
see explanations of the setting possibilities.
If so, establish a connection between the centre output
of the amplifier and the centre input of the TV set AUDIO
IN1 C with a cinch cable.
Attention: Do not use the centre speaker connection of
the amplifier, use the centre pre-amp output instead!
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
The DVD player is already registered at AV1 in the connection
wizard at the factory.
Assignment of the digital audio input
Your TV set can assign an AV input to the digital audio input socket
AUDIO DIGITAL IN. When switching over to this AV input, the digital audio
signal at the AUDIO DIGITAL IN input is passed on to the integrated Dolby
Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT.
You will hear the digital sound of the assigned AV input, if available, in
place of the analogue sound.
If new devices are connected and registered in the
connection wizard, the digital audio input AUDIO DIGITAL
IN is assigned in the connection wizard (see page 36).
Audio connection in HDMI (DVI) devices
Connecting devices to the digital audio input
You must feed the digital audio signal to the TV set for sound reproduction
from an external device, e.g. from the DVD player.
Reproduction of the external digital audio signal can be played back via
the Dolby Digital Decoder integrated in the TV set or via an externally
connected digital audio amplifier.
Devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI
adapter to the HDMI1/DVI or HDMI2/DVI socket of the TV set, you can
connect the digital sound of the external device to the digital audio input
socket AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI
socket of the TV set takes place as described in the column on the left.
➠ If an external audio amplifier is used, this must be regis-
tered in the sound components wizard (see page 44).
If you want to use the analogue sound of the external devices, connect
it to the AUDIO IN2 socket.
Call TV menu.
34Select Connections,
6 go to the menu line below.
Devices with HDMI connection
If external devices with HDMI interface are connected to the HDMI1/DVI
or HDMI2/DVI socket of the TV set, no assignment of the audio input is
necessary because the digital transmission of picture and sound takes
place via one connection in HDMI.
34Select Miscellaneous,
6 go to the menu line below.
34Select Assign digital audio input,
6 go to the menu line below.
34Select AV input.
TV menu
Connections
INFO
END
Miscellaneous
Assign digital audio input
to AV1
no
to AV2
to AVS
to HDMI1/DVI
to HDM
To connect a DVD player to the digital audio input of the
TV set for example, connect the digital output socket of
the DVD player (DIGITAL OUT) via a cinch cable to the
AUDIO DIGITAL IN socket on the TV set.
TV set
AUDIO DIGITAL IN
AV1
MULTICHANNEL AUDIO OUT
I
AUX-
LEFT CENTER
REAR
LEFT
FRONT
I/O
DIGITAL AUDIO
PCM/MPEG2/AC3/D
STEREO OUT
VIDEO OUT
MAINS
II
TO TV-I/O
RIGHT SUBW. RIGHT
REAR FRONT
R
L
(CVBS)
VIDEO OUT
S-VID(EYO/C)
DIG OUT
OUT
OPT OUT
AUDIO
DVD player
45 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Enter timer data
The direct way to record
Timer data are displayed after selecting the programme
you want to record. You can change these before
confirming.
You can programme timer recordings via the integrated Digital Recorder
or connected recorders on the TV set. The recording wizard is integrated
at several places for programming a recording. Further information
about recording with the Digital Recorder can be found in a separate
operating manual.
Timer data
12.00 Brisant
OK
Recorder
DVD-REC
DR
Station
01 Das Erste
14.09.2006
17.15 until 17.45
no
Programming a timer recording with the EPG
Date
Recording time
VPS
➠ You are in EPG mode,if not, press the EPG button.
Recording type
once only
END
Switch recorder to AUX!
EPG (Electronic Programme Guide)
Mon 31.07./16:05
OK
INFO
confirm
Date
Time
Mon 31.07
now
soon
17:00
18:00
19:00
20
Station
Topics
all
all
OK confirms Timer data,
or change if necessary:
OK
15:57-16:59 arte
16:00-16:15 MDR FERN... Hier ab vier
Charmed - Zauberhafte Hexen
16:00-16:10 EinsExtra
16:00-17:15 SAT.1
16:00-16:30 ProSieben
EinsExtra Aktuell
Richter Hold
M. Asam - Mode
34Select Recorder.
16:00-16:55 ZDFtheater... Waschtag
2 ZDF
6Select Date.
16:05-17:00 Bayrische...
16:05-16:45 KiKa
Wir in Bayern
Skippy, der Buschpilot
Star Trek - Das nächste Jah...
Enter the recording date with the numeric buttons.
16:05-17:00 KABEL1
Charmed - Zauberhafte Hexen
6Select Recording time.
OK
TEXT
P+
P–
END
Detail
Page ↑↓
View
Record
Select date, ... , topics
Enter the recording time with the numeric buttons.
MENU
Select time
0
-
9
6Select VPS.
34Set yes/no.
6Mark the desired programme.
Red button: Call Timer data.
6Select Recording type.
34Set once, Mon-Fri, daily, weekly.
Change or confirm Timer data as necessary.
OK confirm the Timer data.
Programming a timer recording via teletext
➠ You are in Teletext mode; if not, press the TEXT button.
Setting possibilities in the Timer data menu:
301 302 ARDtext
Do 14. 09. 06
09: 36 : 42
Do 14. 09. 06
Das Erste
Recorder Selection of the connected/integrated recorder.
Date Day of recording.
14.00
14.10
Tagesschau
In aller Freundschaft UT . . . . . . . . . . . 316
Zweite Begegnung (D, 2005)
Tagesschau
15.00
15.10
16.00
16.10
17.00
17.15
17.47
17.55
18.20
18.50
Sturm der Liebe (221) . . . . . . . . . . . . . 317
Tagesschau UT
Eisbär, Affe & Co. . . . . . . . . . . . . . . . 318
Tagesschau um fünf UT
Brisant . . . . . . . . . . . . . . . . . . . . . . . 319
Tagesschau
Verbotene Liebe . . . . . . . . . . . . . . . . 320
Marienhof . . . . . . . . . . . . . . . . . . . . . 321
Das Geheimnis meines . . . . . . . . . . . . 322
Vaters (19)
Recording time Time of recording.
VPS Use VPS data, yes/no.
(Some stations do not broadcast a VPS signal).
Recording type once, Mon–Fir, daily or weekly.
Serial can also be selected for timer recordings with the
EPG.
19.20
Das Quiz mit Jörg Pilawa . . . . . . . . . . 384
bis 19.50 Uhr
300 <<
–
Abend > 303
ARD morgen
+
Jetzt im TV
OK
Select programme
Record
➠ If you use an external recorder without Digital Link Plus, you have
to select the recording source in the recorder (e.g. AUX). This is the
case when DVB programmes are to be recorded. The TV's receiver
is used.
Call the programme pages of the current station.
Change preset page numbers, see this page 31.
Green button: Go to the appropriate page.
➠ If you use an external recorder with Digital Link Plus or a comparable
6Select desired broadcast,
OK calls Timer data.
system (e.g. P50), this is controlled automatically.
Change or confirm Timer data as necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Programming the timer with the timer overview
A timer recording can also be programmed manually.
Timer recording with external devices
Recorder with Digital Link Plus
Call Timer list.
If you use an externally connected recorder with Digital Link Plus or a similar
system, the TV set and connected recorder exchange data (e.g. compare
station lists TV set/recorder or timer data of analogue stations).
Please consult the operating manual of your recorder to find out if your
recorder is Digital Link Plus compatible. In addition use only Euro AV
cables for the connection between TV set and recorder.
You see a list of all previously programmed timers:
Timer list
Mon 31.07/11:28
Mon 14.09.
Wed16.09.
Thu 22.09.
17:15-17:45 Das Erste
14:00-15:50 ZDF
20:15-22:25 3sat
Brisant
Biathlon-Weltcup
wissen spezial
Analogue stations
----
The timer data are transmitted automatically from the TV set to
the recorder after programming is complete. (For DVD recorders
in addition the recording quality SQ or EQ is also transmitted.)
The recording then is controlled by the recorder and the recorder
tuner is used for reception of the programme.
The recording data are not saved in the timer overview of the TV
set. Consequently if you want to change or delete the timer data
then you must do so on the recorder.
END
New recording
Change
Delete
INFO
Green button: Change timer recording.
Yellow button: Delete timer recording.
Red button: New timer recording.
Programming the timer manually
Digital stations
➠ The timer overview is open.
If you want to record digital stations with an externally connected
recorder, then the DVB tuner is used and the TV device takes over
control of the recorder. Then the station on the TV set is locked
during the timer recording. It is not possible to switch over to
another DVB station.
Red button: Call the recording wizard.
INFO
END
Recording wizard
Via EPG
OK
Via teletext
Manual
34Select Manual,
OK call Station selection.
Recorder without Digital Link Plus
346 Select station.
OK calls the Timer data.
If you cannot programme your externally connected Loewe recorder from
the TV set, but it supports Digital Link (Loewe-own system), the receiver
of the TV set is always used.
Digital Link must be switched on on the recorder. Read the operating
instructions of your Loewe recorder.
For time data input, see page 46.
After confirming the timer data, the new recording is
transferred to the timer overview.
In addition use only Euro AV cables for the connection between TV set
and recorder.
Explanation of the setting possibilities of the recording wizard:
Analogue and digital stations
Via EPG Timer programming via EPG (see Programming timer
recording via EPG, page 46).
You can control the recording from the TV set. The recorder must be
set manually to the AV input, to which the TV device is connected.
Then the station on the TV set is locked during the timer recording.
It is not possible to switch over to another DVB station.
Via Teletext Timer programming via Teletext (see Programming timer
recording via Teletext, page 46).
Manual Programming timer manually (see above).
Copy protection
Copy-protected programs will not be output on the EURO AV sockets
for legal reasons.
47 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Viewing photos
PhotoViewer
You can view photos in the standard JPEG format stored on a USB stick
or a memory card in a card reader. You can also collect photos in a slide
show.
➠ The photo overview is displayed.
Folder_1
OK
Connecting
Plug a card reader (with a USB cable) or a USB stick into the USB con-
nection on the TV set (see page 5).
If, due to the selected installation solution of the TV set (e.g. for wall as-
sembly), the USB socket is difficult to access, use a USB extension cable
for the USB stick (available from your dealer).
USB 1:\picture_024.jpg
38 pictures
OK
END
View picture
Mark picture
Slide show
scroll ↓↑ (1/3)
Starting the PhotoViewer
P+
P–
MENU
INFO
➠ No photos can be shown which are available in progressive JPEG
634mark a photo, page with P+/P– if necessary.
format.
OK display as full picture.
A memory card or the USB stick should contain data in standard JPEG
format with the file extension ".jpg".
PhotoViewer mode starts automatically when a memory card is inserted
in the card reader, or when a USB stick is inserted. You see the first page
of the photo overview (see right column).
If there are several memory cards in the card reader, you can select the
desired memory card in the PhotoViewer menu with the Select memory
medium menu item (see page 49).
If a memory medium is already connected to the USB socket of the TV
set, start the PhotoViewer as follows:
Call the Assist+ menu.
or P+ next photo.
34Mark PhotoViewer.
or P– previous photo.
OK calls the photo overview.
END: Show/hide photo information.
Ending the PhotoViewer
Yellow button: Zoom photo.
Enlargement factors x2, x4, and x8 are possible.
Press the button several times.
Pull out the memory card(s) or USB stick.
or press:
The 4th press returns you to the original size.
END button.
Select photo section in zoom mode with 634.
Exit the zoom mode to the photo overview with OK or
the STOP button.
or:
TV or RADIO button.
34Rotate picture by 90 degrees to the left/right.
➠ Photos displayed in a slide show can only be rotated
in the Pause mode for viewing.
OK or STOP button: Back to the Photo Overview.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Open folder
Calling the PhotoViewer menu
➠ Folders will only be displayed if they were created
In the PhotoViewer menu you can make picture settings and select the
memory medium.
on the memory card / USB stick.
➠ The photo overview is displayed.
Call the PhotoViewer menu.
Ordner_1
634mark a folder in the photo overview.
OK open folder.
The photos in this folder are displayed.
OK
OK
INFO
END
PhotoViewer menu
Go to ...
Picture display Picture change
Picture crossovers
USB 1:\Folder _1\
29 pictures
Picture 001
...
OK
END
Open folder
Slide show
scroll ↓↑ (1/2)
P+
P–
MENU
INFO
Explanations of the setting possibilities
Marking photos for slide show
Go to... Within the folder select a photo directly or go to the
beginning or end of the folder.
Mark the photos that you want to display in a slide show.
463Navigate to a photo.
Picture display With Optimum size the photo is reduced or enlarged in
size so that the screen is optimally filled.
With Original resolution each pixel of the photo represents
one pixel on the screen. If the photo resolution is higher
than that of the screen, then portions of the photo will
be cropped.
OK
USB 1:\Folder_1\picture_017.jpg
29 pictures
OK
END
View picture
Slide show (marked pictures)
P+
P–
MENU
INFO
Unmark picture
scroll ↓↑ (1/2)
Picture change Set the display time per photo in a slide show to between
3 and 60 seconds.
Blue button: marks photo for slide show.
Starting a slide show
The loading time for the photo depends on the size, the
number of stored files and the transmission speed of the
memory medium. A photo change may therefore take
longer than stated.
➠ No photos marked: All photos of the folder that was
just opened will be displayed.
➠ Photos marked: Only marked photos will be displayed.
Picture There is a choice of four different photo transitions for
crossovers changing slides. You can also have the photo transitions
run in sequence.
Play button: Start / continue slide show.
OK calls the photo overview.
Photo info Display additional information about the picture: Record-
ing time and date, resolution and picture size.
Pause button: Pause / continue the slide show.
Yellow button: Zoom picture (only in pause mode).
Picture settings Set picture adjustment, contrast, colour intensity, colour
temperature, brightness, sharpness, DNC.
34Rotate picture in 90º increments (only in pause mode).
Select memory Select memory medium from which the photos are to be
medium reproduced. This menu item is only displayed if at least
two memory media are available.
or P+ next photo.
or P– previous photo.
STOP button: End slide show.
49 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Setting the remote control to other Loewe devices
Operating Loewe equipment
Using the remote control for a DVD player
The specified key combinations must be depressed until one of the LEDs
flashes twice (approximately 5s). The devices marked by are preset in
the remote control included with the TV set.
Press the DVD button, the display above it will light for
approx. 5 seconds.
Device
Button combination
Using the remote control for a recorder
Loewe TV (Chassis L2700)
Loewe Centros 1102/1172
Loewe Centros 1202/2102 HD/2172 HD
Loewe ViewVision DR+
Loewe ViewVision 8106 H
Loewe Auro 2216 PS/8116 DT
Loewe Xemix 6222 PS
+
+
+
+
+
+
+
Press the REC button, the display above it will light for
approx. 5 seconds.
Using the remote control for the TV set
Press the TV button, the display above it will light for
approx. 5 seconds.
Every time the button is pressed, the display of the selected operating
mode lights up (TV – REC – DVD – RADIO).
Functions for the Loewe DVD player (Auro 2216 PS, 8116 DT)
Functions for the Loewe DVD recorder (Centros 1202, 2102 HD, ViewVision DR+)
TV Sound off/on
Sound off/on
Switch on/off - on stand by
Switch on/off - on stand by
LED indicator for current
operating mode
TV-Radio Digital
LED indicator for current operating mode
short: TV Radio Digital;
Switch over to operate TV set
long: Auro FM/AM-Radio
Switch over to operate TV set
Switch over to operate Recorder
Switch over to operate DVD-Player
TV Sound menu
Switch over to operate Recorder
Switch over to operate Auro
Select sound format
Timer recording menu;
timer recording list menu
Sleep timer
STOP: Title list;
Set TV picture format;
RADIO: Mono/Stereo
PLAY: Edit thumbnail;
CARD: Photo-, Music-, Film-Mode
DISC: select chapter/title;
RADIO: select stored station;
MENU: enter digits
STOP: Select station directly
MENU: enter numbers or letters
ViewVision DR+
:
Timeshift Mode
ViewVision DR+
:
STOP: Call AV selection
(AV1-AV4,DV,TV)
STOP: Call AV selection
DISC: Repeat A-B;
RADIO: FM/AM-mode
ViewVision DR+
:
Card Reader operation
ViewVision DR+: “Home” menu
DISC: Repeat; RADIO: display
RDS name/frequency of station
PLAY: skip 15 Sec.
Select external audio source
PIP (picture in picture)
DISC: menu bar
MENU: context help
User interface of loaded DVD
MENU: original and playlist
Info;
PLAY: menu bar
DISC: User interface of loaded DVD
DISC: Status display;
RADIO: station table;
MENU: hide menu
Show/hide menu
MENU: hide menu
Show/hide menu; MENU: close window
V– / V+ Volume down/up
P+/P-
V– / V+ TV Volume down/up
P+/P–
DISC: chapter up/down;
MENU: select up/down
DISC: search back/forward;
MENU: select left/right
PLAY: Next chapter;
STOP: Select station up/down
DISC: next/previous chapter;
RADIO: station forward/back
MENU: select/set
Status display (TV, DVD)
MENU: confirm the menu selection
DISC: Title/Chapter overview;
RADIO: station table;
MENU: confirm menu selection
Green button:
Green button: ShowView menu
Red button: new chapter marker
Yellow button: Zoom
Yellow button: Zoom
Title/Chapter selection
Blue button: DISC:
short: Set marker;
long: Marker search
Blue button: Set marker
Red button: DISC: camera position
Playback
Playback
DISC: short: next chapter/title;
long: search forward
RADIO: short: fine tuning forward;
long: search forward
DISC: short: beginning of
chapter/title previous chapter
long: search back
PLAY: press short:
Start of current chapter/previous chapter
PLAY: press long: search back
PLAY: Press short: next chapter
PLAY: Press long: search forward
PAUSE: Press short: slow motion forward
RADIO: short:
PAUSE: press short: slow motion back
Stop
fine tuning back long: search back
Stop
Record
Pause /single frame
no function
Pause; single frame; slow motion
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Specifying the switch off position
Rotating the TV set
Your TV set has a connection for a rotating stand control. If the set is
mounted on a motorised stand, you can use the remote control to adjust
it to your seating location accordingly.
This is where you specify the position that the TV will take when it is
switched off. In order for the TV set to return to the determined switch-off
position when switching it off, this must be activated (see below).
Call TV menu.
➠ A motor unit is connected.
➠ In normal TV mode, without other displays.
34Select Settings,
6 go to the menu line below.
34Rotate the TV set.
34Select Miscellaneous,
6 go to the menu line below.
Do not place any objects in the rotation range of the TV set that could
obstruct the rotation or that could be knocked over by the rotation
movement.
34Select Rotate TV,
6 go to the menu line below.
Setting the range of rotation
34Select Set switch-off position,
OK calls Set switch-off position.
You can specify the rotation range of the TV device (maximum +/- 40
degrees) by setting the maximum right and left stop position.
TV menu
Call TV menu.
Settings
Miscellaneous
Rotate TV
INFO
END
34Select Settings,
6 go to the menu line below.
Set switch-off position
0
OK
Adopt
34Select Miscellaneous,
6 go to the menu line below.
34Set desired switch-off position.
The TV set rotates in the process.
OK accepts the set position.
34Select Rotate TV,
Close the menu.
6 go to the menu line below.
34Select Basic adjustment,
OK calls the basic adjustment.
Activating the switch-off position
Call TV menu.
Rotate TV
Basic adjustment (right)
END
21
OK
34Select Settings,
Proceed
6 go to the menu line below.
4 Basic adjustment (right)
34Select Miscellaneous,
6 go to the menu line below.
Turn your TV set as far to the right as the installation
position of your set allows. This will be the maximum
right rotation position in future.
34Select Rotate TV,
6 go to the menu line below.
OK confirms basic adjustment to right.
Rotate TV
Basic adjustment (left)
-30
END
34Select Activate switch-off position,
6 go to the menu line below.
OK
End of basic adjustment
34Select yes.
3 Basic adjustment (left)
Turn your TV set as far to the left as the installation
position of your set allows. This will be the maximum
left rotation position in future.
Close the menu.
If the TV set is switched off with the on/off key on the remote control or
OK ends the basic adjustment.
with the switch integrated in the display then it will turn to the defined
switch-off position. When it is switched back on, it returns to the position
last set.
Close the menu.
51 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible cause
Remedy
All menus are displayed in the wrong language. The menu language was set incorrectly.
Set the menu language:
Press the INFO button in TV mode (Index).
Mark the first key word and call it with OK.
Then select the language and confirm it with
OK.
In the TV menu, Connections cannot be called A timer recording is in progress.
(displayed in grey).
Wait until the timer recording ends or delete
the timer recording (page 47).
The control functions of the Loewe Recorder
and the Timer are not working or are not
working properly
a) The Digital Link function is not activated or
not possible in the recorder.
a) Activate Digital Link in the recorder (see
operating instructions of the recorder).
b) EURO-AV cable is not connected.
c) Recorder is not logged in.
b) Connect EURO-AV cable (page 35).
c) Register recorder (page 35).
General problems when connecting external
devices via an AV input.
a) The device is not logged in to the connection
wizard or is connected differently from
shown in the connection diagram.
a) In the connection wizard (TV menu →
Connections → New devices/modifications)
compare the connection diagram with the
actual installation and connect as shown if
necessary (page 35).
b) The AV standard is set incorrectly.
b) Set the correct standard (page 15).
c) Set the correct signal type (page 35).
c) The signal type is set incorrectly.
If for AV standard or AV signal Automatic is
set then this can cause errors to be
detected with signals that do not comply
with standards. In this case standard and
signal must be set according to the
information in the operating manual of the
external device.
The connection of a decoder does not function a) The signal is not decoded because the
a) Follow the instructions in the connection
wizard (TV menu → Connections → New
devices/modifications) and select the
appropriate decoder station (page 35).
or does not function properly.
correct decoder stations have not been
selected in the connection wizard.
b) In decoder mode the sound is missing
because the wrong decoder sound has been
assigned in the connection wizard.
b) Follow the instructions in the connection
wizard and select the right audio source
(Decoder, TV oder Autom.) (page 35), see
the decoder manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible cause
Remedy
Digital Link Plus does not work.
a) EURO-AV cable is not fully wired (pin 10 not
wired).
a) Replace the EURO-AV cable.
b) Some recorders can only adopt stations
during the initial installation of the TV set.
b) Restore the recorder to the as-delivered
state (see recorder's operating manual).
With Teletext various character sets are
displayed incorrectly.
The wrong character set has been set in the
Teletext menu.
Set the right character set: Teletext menu -
Settings - Character set: Select Standard or the
appropriate character set.
No sound via the external digital audio
amplifier.
a) The external digital audio amplifier does not
support the selected sound format (Dolby
Digital, dts, MPEG).
a) Set PCM stereo on the DVD player in the
sound selection. For DVB stations on the TV
set switch to stereo in the status display
(END) – language/sound selection (Green
button)
b) TV set and external digital audio amplifier are b) Connect Digital-Out from the TV set to a
not connected with each other.
Digital-In input of the external digital audio
amplifier and select the appropriate input
to this.
The picture of an additional device can be
seen but the timer cannot be called.
The device is not registered in the connection
wizard or is connected differently from shown
in the connection diagram.
In the connection wizard (TV menu →
Connections → New devices/modifications)
compare the connection diagram with the
actual installation and connect as shown if
necessary (page 35).
The picture of an additional device can be
seen, however the error message no recorder wizard or is connected differently from shown
available is output.
The device is not registered in the connection
In the connection wizard (TV menu →
Connections → New devices/ modifications)
compare the connection diagram with the
actual installation and connect as shown if
necessary (page 35).
in the connection diagram.
Photos on the USB stick are not displayed
correctly in the PhotoViewer or a
"?" appears.
The photo is not available in a displayable
format.
Convert photo file into a standard JPG format
on the PC.
53 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
General data
+
+
Type
Individual 32 Selection HD /DR
Article number
66441xxx
Dimensions for device without stand (W x H x D) in cm
Dimensions for device with stand (W x H x D) in cm
81,5 x 57,9 x 9,9
81,5 x 62,8 x 32,0
Weight for device without stand (approx.) in kg
Weight for device with stand (approx.) in kg
Display
22,4
27,4
HD-LCD technology
80 / 16:9
1366 x 768
1,200:1
Picture diagonal in cm/picture format
Resolution in pixels
Static contrast ratio
Viewing angle horizontal and vertical
178°
Power consumption (EN 62087)
in operation (watt)
in standby (watt)
100
1,8
Ambient temperature (Celsius)
Relative humidity (non-condensing)
Air pressure
5° – 35°
20 – 80%
800 – 1114 hPa (0 – 2000 m above sea level)
Electrical data
Chassis designation:........................................................................................... L 2700
Power supply: ........................................................................220 V – 240 V/50–60 Hz
Tuner:.................................................................................. VHF/UHF/cable/hyperband
Range:.......................................................................................... 45 MHz to 860 MHz
Station storage locations incl. AV and radio:.........................................................4000
TV standards:.................................................................................. B/G, I, L, D/K, M, N
Colour standard:....................................... SECAM, PAL, NTSC, NTSC-V, PAL-V (60 Hz)
Sound standard: ....................................................Mono/Stereo/2-Ton/Nicam B/G, I, L
............................................Dolby Digital, Dolby Virtual Speaker, DTS
EURO-AV 2 Video OUT: ...................................................................CVBS (VHS/8 mm)
...............................................Y/C, (only with SVHS Link Plus)
Audio IN:...............................................................................................L/R
Audio OUT:...........................................................................................L/R
Jack 3.5 mm: ....................................................................Headphones 32- 2000 ohm
Mini-DIN (AVS)
Cinch (yellow)
Video IN:..............................................................Y/C (S-VHS/Hi 8)
Video IN:...........................................................CVBS (VHS/8 mm)
Cinch (white/red) Audio IN:............................................................L (white) / R (red)
2x IEC socket
2x F socket
Jack 3.5 mm
75 Ohm/5 V/80 mA:................................Antenna/cable/DVB-T/C
75 Ohm 13/18 V/350 mA:........................... ANT-SAT DVB-S/S2(1
AUDIO IN2: ..............................................................................L/R
Audio nominal power (sine):.......................................................................2 x 20 watt
Lower limit frequency TV loudspeaker:................................................................90 Hz
Teletext: ..........................................................................................TOP/FLOF Level 2.5
Page memory........................................................................................................2000
Cinch
AUDIO IN max. 2Vrms:...................................................................Centre
2 x Cinch AUDIO IN1:.....................................................................L (white) / R (red)
2 x Cinch AUDIO OUT (level depends on configuration):...............L (white) / R (red)
Cinch
Cinch
Cinch
Cinch
Cinch
SUB-D
COMPONENT IN:...................................................................Cb/Pb signal
COMPONENT IN:.....................................................................Cr/Pr signal
COMPONENT IN:.......................................................................... Y signal
AUDIO DIGITAL IN (SPDIF): ....................................................Digital audio
AUDIO DIGITAL OUT (SPDIF):.................................................Digital audio
AUDIO LINK:.......................................................................... Multi-sound
Connections
Mains socket:......................................................................................... Supply voltage
EURO-AV 1 Video IN:..........................................................................Y/C (S-VHS/Hi 8)
........................................................................CVBS (VHS/8 mm)
Video OUT: ...................................................................CVBS (VHS/8 mm)
.......................................................................Y/C (S-VHS/Hi 8)
Audio IN:...............................................................................................L/R
Audio OUT:...........................................................................................L/R
EURO-AV 2 Video IN:..........................................................................Y/C (S-VHS/Hi 8)
........................................................................CVBS (VHS/8 mm)
2 x HDMI Digital Video/Audio IN Type A 19pole Standard 1.2a:..Digital video and audio
SUB-D
SUB-D
Mini-DIN SERVICE:............................................................................... Service/L-Link
Mini-DIN CONTROL:..............................................................Rotating stand control
USB
PC IN:..........................................................................PC/STB video signal
RS-232C:.............................................................................serial interface
..............................................................................................RGB
USB 2.0:.............................................................................................Data
(1 Digital twin satellite tune optionally available as an upgrade kit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Accessories
Setup possibilities
Trim:
With your Individual Selection device it is possible to replace the later-
ally attached trim (panels) to match the ambiance of your home. There
are different surface structures or colours that can be selected for your
device. Please contact your dealer in this regard.
Wood trim is a natural product. In this case UV light (strong sunlight) can
cause slight discoloration.
Screen Table Stand
Screen Wall Mount 1 (1
Wall holder WM54
Loewe Individual Sound:
Your TV set can be extended perfectly with the Individual Sound speaker
system. Numerous speaker combination possibilities with standard speakers,
staellite speakers and a subwoofer can be implemented.
Loewe DVD recorder:
The DVD recorders from Loewe are characterised by form and colour,
which match Loewe TV sets, adapted user guidance and technology.
Combined these devices form a system that offers many advantages.
Cube i Rack:
The Cube i Rack is designed as a supplemental rack that can accommo-
date two peripheral devices such as DVD player and/or DVD recorder, as
well as the subwoofer of the Loewe Individual Sound speaker system. If
a subwoofer is not used then the Cube i Rack can accommodate up to
four peripheral devices.
Screen Lift Plus (1
Screen Paravent
Screen Floor Stand MU
Screen Floor Stand
+
+
Individual 32 Selection HD /DR
• Screen Table Stand (delivery status)
• Wandhalter WM 54
• Screen Wall Mount 1 (1
• Screen Floor Stand MU
• Screen Floor Stand
• Screen Lift Plus (1
• Screen Paravent
• ARS Motor Unit Table Stand (optional)
Digital Twin Satellite Tuner:
You can have your TV set retrofitted with a digital twin satellite tuner.
The twin satellite tuner is fully integrated in the TV set and operated with
the remote control/menu control of the TV set.
ARS Twin DVB-S2
Loewe order no. 89565.080
Cable:
AUDIO LINK adapter
1.5 m
Loewe order no. 89954.001
AUDIO LINK
AUDIO LINK
AUDIO LINK
1.5 m
6 m
10 m
Loewe order no. 89952.001
Loewe order no. 89952.002
Loewe order no. 89952.003
Cubic plug cable
1.5 m
Loewe order no. 90418.930
(1 Only in conjunction with appropriate adapters that are sold separately.
Download from Www.Somanuals.com. All Manuals Search And Download.
Subject to availability.
55 -
Glossary
A
Dolby Pro Logic: Analogue multi-channel audio. Converts a Dolby-coded
stereo signal into a surround sound. This usually contains four channels
(front left, centre, front right, surround channel). A special subwoofer
channel is not generated in this method.
Active antenna: An antenna with its own power supply or amplification
that can improve reception in areas with poor reception.
AV socket: Socket for audio and video signals.
AV sources: Audio/video source.
Dolby Pro Logic II: Analog multi-channel audio. Dolby Pro Logic II is a fur-
ther development of Dolby Pro Logic. This method generates a 6-channel
spatial sound from a stereo or Pro-Logic signal (front left, centre, front
right, surround left, surround right, subwoofer).
AVS: Audio/video sockets on the TV set (cinch and Mini-DIN).
Dolby Surround: Analogue multi-channel audio system that brings four au-
dio channels down to two audio tracks with the aid of a matrix coding.
B
Band: Designation for a frequency range.
Dolby Virtual Speaker: The Dolby Virtual Speaker technology simulates
the surround playback of a real 5.1-channel playback with only two
speakers.
C
DTS: Digital Theater Systems; Digital multi-channel audio.
CA module: The Conditional Access Module contains the coding system
and compares the transmitted code with the one on the Smart Card. If
they match, the appropriate stations or programmes are decoded.
DVB-C/-S/-T: Digital Video Broadcasting stands for digital television.
Technical DVB is the standardised process for transmitting digital content
(television, radio, multi-channel audio, room sound, EPG, Teletext, and
other supplemental services) through digital technology. C stands for
transmission via cable, S for distribution via satellite and T for terrestrial
or antenna distribution.
Cinch cable: Cable for transmitting audio or video.
CI slot: See Common Interface.
Common Interface: The Common Interface (CI slot) is a standardised
interface. By inserting suitable decoding modules (CA modules) and a
Smart Card coded digital programmes can be used.
DVD: Abbreviation of Digital Video Disk and later Digital Versatile Disk.
DVD preceiver: Combi-device of DVD player and radio without integrated
amplifier.
Component IN: Connection by which the video signal is transmitted via
three separate cinch connections. It is made up of the brightness signal
"Y" and the colour difference signals "Pb" and "Pr". YPbPr is the original
analogue version of the digital YCbCr with which, among other things,
video data stored on the DVD and transmitted by satellite, cable or an-
tenna in DVB are colour coded.
DVI: Digital Visual Interface, is an interface for transmitting digital video
and graphic data (without audio).
E
Conditional Access Module: See CA module.
Electronic Programme Guide: See EPG.
EPG: Electronic Programme Guide is the electronic variant of a printed
television programme guide. Using the EPG you can watch the TV
programme of the TV stations which transfer the appropriate data. The
overview of the programmes contains the title, beginning and end and
the duration of the programme. In addition also a brief description of
respective content of the programme is displayed.
D
Decoder: Analogue, coded TV signals are passed through a decoder and
made visible again.
Digital Link: System for controlling recorders (for video and DVD recorders
from Loewe) via the Euro AV sockets of the Loewe TV set with concealed
setup. Controlling the recorder for timer recordings.
Euro AV socket: Interface for connecting video devices to a TV set. This
socket is also referred to as Scart socket.
Digital Link Plus: System for controlling recorders according to protocol
50. For analogue stations the station and timer data are transmitted via
the EURO-AV socket to the recorder. The timer recording is executed
exclusively by the recorder. There is a different designation with different
manufacturers.
F
FLOF: Full Level One Facilities. Teletext system in which designations and
numbers of the jump destinations are transmitted separately for every
page on the bottom line. This guides the reader to related topics for
example. An information about which pages exist and which pages have
sub-pages is not available in FLOF.
Dolby Digital: Digital multi-channel audio. The digital standard for high
quality home movie systems. The individual channels are broadcast sepa-
rately in this standard. The three front channels right, left and centre, the
two surround channels right and left and the external subwoofer channels
are called a 5.1 signal. Another term for Dolby Digital is AC3.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
H
N
HDCP: High-bandwidth Digital Content Protection. Coding system
provided for the interfaces DVI and HDMI for protected transmission of
audio and video data.
Network ID: NID refers to the so-called programme ID number also known
as network ID – a number between 0 and 8191. This specification is
necessary in specific cable networks of some countries. Then only DVB
signals of this station network are searched for.
HDMI: High Definition Multimedia Interface is a newly developed interface
for full digital transmission of audio and video data.
NICAM: Audio standard. Is used in Denmark, England, France, Sweden,
and Spain.
HDTV: High Definition Television is an umbrella term that covers a number
of high resolution television standards.
NTSC: American picture standard.
HD-Ready: A quality seal that is awarded to products which are capable
of displaying high-definition television (HDTV).
P
Page Catching: For Teletext, refers to going to and calling a page
number.
High band and Low band: Transmission ranges for satellites.
PAL: European picture standard.
PCM: Pulse Code Modulation for digital audio.
Picture in Picture see PIP.
J
JPEG: Joint Photographic Experts Group is a committee that has devel-
oped a standard method of compression for digital images. This JPEG
method (JPG for short) named after the committee is a widely used
graphic format for photos.
PIP: Picture in Picture; a function which displays two pictures on the
screen.
JPG: See JPEG.
Pixel: Refers to the smallest unit of a digital grid graphic and its repre-
sentation on a screen with grid control.
Pixel error: A pixel error is a defective pixel, usually on an LCD. Pixel errors
may be caused by production faults. They are expressed for example by
a constantly lit pixel or a constantly black pixel. Single defective pixels
however are excluded from a guarantee.
L
LCD: Liquid Crystal Display.
L-Link: Intelligent system connection between Loewe devices for the
automatic exchange of information. Makes the operation of TV and
Loewe system components even more convenient.
Progressive JPEG: Progressive JPEGs are built up gradually. The picture
quality improves continuously during loading.
LNB/LNC: The crucial electronic component of a satellite antenna is
referred to as an LNB (Low Noise Block Converter). It is mounted in the
focal point of a parabolic antenna. The designation LNC (Low Noise
Converter) indicates that conversion to lower intermediate frequency
takes place. The supplemental block in the LNB refers to the fact that a
whole frequency range (a block) is converted in each case.
ProScan/Progressive Scan: Progressive Scan (abbr. PS) or full picture
method is a technique in the picture build-up of monitors, TV sets,
beamers, and other display devices in which the output device is not
sent line interlaced half pictures – unlike in the interlace technique – but
real full pictures.
R
M
RGB: Colour signals red, green and blue.
Modulator: Transmitter in the video or DVD recorder so that the devices
can receive signals via the tuner of the TV device.
S
Mono: Single-channel audio.
Satellite tuner: Receiver for satellite programmes.
SDTV: Standard Definition TeleVision.
SECAM: French picture standard.
MPEG: Digital compression process for video.
Set Top Box: In the entertainment industry a Set Top Box (STB) is a device
that is connected to a different device - usually a television - and thus
offers the user additional use possibilities.
57 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Signal input groups: The signal sources are divided into different groups
depending on the applied signal. All signal input groups with their cor-
responding signal types and the possible inputs are listed below.
T
Terrestrial: In data transmission a wireless transmission that does not use
satellites as intermediate station is referred to as terrestrial.
TV analogue:
TFT: Thin-Film-Transistor. One widely distributed application is control of
liquid crystal flat screens, for which a signal transistor is used for each
pixel. This design of display is also referred to as active matrix, however
it is frequently also referred to as TFT display.
Signal type: FBAS, YC, RGB-SD (480i/576i), Component-SD (480i/576i)
Input:
Tuner analogue, AV1, AV2, AVS, COMP. In
TV digital:
TOP: Table of Pages. Teletext system in which the individual pages are
divided into topics. The blocks stand for a higher hierarchy level (e.g.
News, Sport, Programmes) and the groups for the level below (e.g. Home/
Abroad, Football/Tennis). Abbreviations can be assigned to the pages
which are displayed in colour on the bottom line and can be selected
with the four coloured buttons on the remote control. Information is also
transmitted which pages exist and which have sub-pages.
Signal type: DVB-SD, HDMI-SD (480i/576i)
Input:
Tuner digital, HDMI1/DVI, HDMI2/DVI
HD analogue:
Signal type: RGB-HD (video mode: e.g.1920x1080, 1280x720),
Component-HD (video modes: e.g. 1920x1080, 1280x720)
Input:
COMP. IN, PC IN
Tuner: Another term for receiver.
HD digital:
Signal type: DVB-HD, HDMI-HD
V
Input:
Tuner digital, HDMI1/DVI, HDMI2/DVI
VGA: PC interface for connecting a monitor.
PC:
Virtual Dolby Surround: A technology certified by Dolby. It creates a virtual
sound from two speakers. Prerequisite is Dolby Surround or Dolby ProLogic
as a source. The used virtualizer processes all multi-channel signals and
gives the impression of additional speakers.
Signal type: RGB
(PC modes: e.g. 800x600, 1024x768, 1280x1024, 1360x768)
PC IN
Input:
PhotoViewer:
VPS: The Video Programme System (VPS) is a signal that some (not all)
television transmitters transmit in the vertical blanking interval of the
television signal. The signal is used by video and DVD recorders when re-
cording programmes to react to delays in start time, programme changes
and excesses of the planned program time.
Input:
USB
Signal strength: strength of the received antenna signal.
Signal quality: quality of the incoming antenna signal.
Smart Card: The Smart Card is an electronic chip card issued by the respec-
tive programme provider or by the certification-free Pay TV operators. It
contains the code which is decoded by the CA module.
Y
Ycc/Ypp: Colour standards for Set Top Boxes.
YCbCr: Digital colour model, see COMPONENT IN.
YPbPr: Analogue colour model, see COMPONENT IN.
Static contrast ratio: Describes the difference between the brightest and
darkest picture display.
Stereo: Dual-channel audio.
Switching voltage: Video devices specify this voltage to switch the TV
device to playback.
Symbol rate: describes the transmission speed for data transmission.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
DVD button 50
O
Smart Card 32
DVI 37
Software update 33
Sound 18
Sound components wizard 39
Sound mode 18
Sound off 18
Split screen 26, 27
Standby mode 11
Station list 16
Status display 21
Switching off 11
Switching on 11
Switching voltage 15
Switch on volume 18
Active speakers 41
Adjusting the picture 19
Adjusting the sound 18
Alarm 15
Assist+ 7, 20
Audio amplifiers 44
Auto format 19
On-screen displays 15
Overview diagram 15
E
EPG 28
P
Page selection 30
Parental lock 15, 58
PC IN 37
Personal text pages 20, 31
PhotoViewer 48
Picture 19
Picture adjustment 19
Picture format 19, 20
16:9 20
F
Factory settings picture/sound 19
Favorites 17
File folder 49
First installation wizard 11
FLOF 30
AV audio signal 18
AV selection 17
B
Batteries 10
Brightness 19
Button functions 20
H
HDMI 37
Headphone volume 18
Help 14
4:3 20
Cinema 20
PALplus 20
Panorama 20
Zoom 20
T
C
Teletext 30
Teletext subtitles 20
Time 20
Timer data 46
Date 46
HiFi/AV amplifier 44
CA module 32
Card reader 48
Change favourites lists 24
Add station 25
I
Index in the TV set 14
Individual Sound 40
Info Display 14
Picture in Picture 26
PIP 26
Programme info 20
Delete station 25
Move station 25
Rename list 24
Recorder 46
Recording time 46
Recording type 46
VPS 46
Initialise picture/sound 19
R
L
Change station 23
Delete station 23
Move station 23
Rename station 24
Restore station 24
CI slot 32
Coloured buttons 20, 21, 30
Component IN 38
Connecting the antenna 10
Connections 5
RADIO button 11
Language 11, 14, 52
Language/audio selection 21
Last station 20
LNC/LNB 12
Loudness 18
Radio menu 15, 34
Radio mode 11, 34
REC button 50
Timer functions 15
Timer list 47
Timer recordings 46
TOP 30
TOP table 30
TV base software 33
TV button 10, 50
TV menu 15
Recording 46
Recording wizard 46
Remote control 3, 10, 50
Repeat initial installation 11
Reset picture/sound 19
Rotating the TV set 51
M
Mains switch 11
Manual station search 23, 36
Manual timer 47
Maximum volume 18
Memorise 28
TV set equipment 6
Connection wizard 35
Contrast 19
Control unit 4
S
U
Safety 8, 9
USB stick 33, 48
Memory medium 49
Menu operation 13
Mobile phone keypad 13
Move picture vertically 20
Muting 18
Satellite system 12
Scope of delivery 6
Search wizard 22
Secret code 58
Select station 16
Set current time/date 15
Settings 15
Signal type 35, 36
Slide show 49
Small PIP 26, 27
Copy protection 47
V
D
Video source 17
Videotext subtitles 31
Volume 18
Volume adjustment 18
VPS times 31
Data capture 29
Device connection wizard 35
Digital audio input 45
Digital Link 47
Digital Link Plus 46, 47
Display 11
N
New devices/modifications 35
Numeric buttons 13, 14, 16
DVB software 33
DVB subtitles 21
59 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Loewe Austria GmbH
Parkring 10
1010 Wien, Österreich
Tel.: +43 - 810/0810-24 (zum Ortstarif)
E-Mail [email protected]
Kjaerulff 1 A/S
Loewe Italiana SRL
Largo del Perlar, 12
37135 Verona (VR), Italia
Tel. +39 - 045 82 51 619
Fax +39 - 045 82 51 622
Email [email protected]
DSV TRADING SA
Plac Kaszubski 8
81-350 Gdynia, Polska
Tel. +48 - 58 - 6 61 28 00
Fax +48 - 58 - 6 61 44 70
Email [email protected]
C.F. Tietgens Boulevard 19
5220 Odense SØ, Denmark
Tel. +45 - 66 13 54 80
Fax +45 - 66 13 54 10
Email [email protected]
International Dynamics
Australasia Pty Ltd.
129 Palmer Street
Richmond 3121, Victoria, Australia
Tel. +61 - 3 - 94 29 08 22
Fax +61 - 3 - 94 29 08 33
Email [email protected]
Gaplasa S.A.
PL Trading (pz 2004) Ltd.
27, Aliat Hanoar St.
Givataiim 53401, Israel
Tel. +972 - 3 - 57 27 155
Fax +972 - 3 - 57 27 150
Email [email protected]
Service Center Loewe
Conde de Torroja, 25
28022 Madrid, España
Tel. +34 - 917 48 29 60
Fax +34 - 913 29 16 75
Email [email protected]
ul. Verkhnaya Maslovka, d. 29
125083 Moscow, Россия
Tel. +7 - 495 612 50 43
Fax +7 - 495 612 47 10
Email [email protected]
Kjaerulff 1 AB
Loewe Opta Benelux NV/SA
Uilenbaan 84
2160 Antwerpen, België
Tel. +32 - 3 - 2 70 99 30
Fax +32 - 3 - 2 71 01 08
Email [email protected]
Loewe Opta France S.A.
13 rue du Dépôt,
Parc del l‘Europe, BP 10010
67014 Strasbourg Cédex, France
Tel. +33 - 3- 88 79 72 50
Fax +33 - 3- 88 79 72 59
Email [email protected]
Mirage Holdings Ltd
Flamingo Complex, Cannon Road
Qormi, Malta
Tel. +356 - 22 - 79 40 00
Fax +356 - 21 - 44 59 83
Email [email protected]
Ridbanegatan 4, Box 9076
21377 Malmö, Sverige
Tel. +46 - 4 06 79 74 00
Fax +46 - 4 06 79 74 01
Email [email protected]
BaSys Czech & Slovak s.r.o.
Stará Vajnorská 17/A
831 04 Bratislava, Slovakia
Tel.: + 421 2 49 10 66 18
Fax: + 421 2 49 10 66 33
Email: [email protected]
Telion AG
Rütistrasse 26
8952 Schlieren, Schweiz
Tel. +41 - 44 732 15 11
Fax +41 - 44 732 15 02
Email [email protected]
SOMARA S.A.
Kjaerulff 1 OY
Uudenmaantie 100
20760 Piispanristi, Finland
Tel. +358 - 20 751 3800
Fax +358 - 20 751 3801
Email [email protected]
377, Rue Mustapha El Maani
20000 Casablanca, Morocco
Tel. +212 - 22 22 03 08
Fax +212 - 22 26 00 06
Email [email protected]
Jadran Trgovsko Podjetje
Partizanska cesta 69
6210 Sezana, Slovenija
Tel. +386 - 57 31 04 40
Fax +386 - 57 31 04 42
Email [email protected]
HADJIKYRIAKOS & SONS LTD.
Prodromou 121, P.O Box 21587
1511 Nicosia, Cyprus
Tel. +357 - 22 87 21 11
Fax +357 - 22 66 33 91
CableCom AS
Gneisveien 12
3221 Sandefjord, Norge
Tel. +47 - 33 48 33 48
Fax +47 - 33 44 60 44
Email [email protected]
LinnSight Ltd.
PO Box 8465
KA 7 2YF Prestwick, UK
Tel. +44 - 12 92 - 47 15 57
Fax +44 - 12 92 - 47 15 54
Email [email protected]
Email [email protected]
Enkay Elektronik Servis Müdürlügü
Alemdag Cad: Site Yolu No.: 10
Ümraniye/ Istanbul, Türkiye
Tel. +90 - 216 634 44 44
Fax +90 - 216 634 39 88
Email [email protected]
Ing. Ivo Tietz
Dolní nám. 9
746 01 Opava, Česko
Tel.: +420 553 624 944
Fax: +420 553 623 147
E-mail [email protected]
International Dynamics (NZ) Pty Ltd
PO Box 109 317, Newmarket
Auckland, New Zealand
Tel.: +64 9 379 0179
Fax: +64 9 379 0279
E-mail: enquiries@internationaldynamics.
co.nz
SIBA Engineering S.A.
6, Kifisou Av.,
122 42 Aegaleo, Hellas
Tel. +30 - 210 - 5913793
Fax +30 - 210 - 5317755
Email [email protected]
Videonix (Pty) Ltd
Loewe Opta GmbH,
P.O. Box 31952, Kyalami 1684
Republic of South Africa
Tel. +27 - 1 14 66 47 00
Fax +27 - 1 14 66 42 85
Email [email protected]
Customer Care Center
Industriestraße 11
96317 Kronach, Deutschland
Tel. +49 1801–22256393
Fax +49 9261–99500
Email [email protected]
Basys Magyarorszagi KFT
Epitok utja 2–4
2040 Budaörs, Magyar
Tel. +36 - 23 41 56 37 (121)
Fax +36 - 23 41 51 82
Email [email protected]
Videoacústica
Comercio e Representacoes de
Equipamentos Electronicos S.A.
Estrada Circunvalacao,
Quinta do Paizinho, Arm. 5
2795-632 Carnaxide, Portugal
Tel. +351 - 2 14 24 17 70
Fax +351 - 2 14 18 80 93
© by Loewe Opta 070312
60
Download from Www.Somanuals.com. All Manuals Search And Download.
|