KOMPONENT 120
BASS EXTENSION
LOUDSPEAKER
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information English
GENERAL SAFETY INSTRUCTIONS
Important Safety Instructions
Explanation of symbols used on the rear or underside of the apparatus:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
This symbol is intended to alert the user to the presence of uninsulated
dangerous voltages within the enclosure of sufficient magnitude to cause
electric shock.
4. Follow all instructions.
5. Do not use the apparatus near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, near a swimming pool etc.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Site the
apparatus so that its location or position does not interfere with its proper ventilation. For example, the
apparatus should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation
openings, or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.
This symbol is intended to alert the user to the presence of important operation,
maintenance and servicing information in the instruction and service manuals.
For apparatus connected to the mains electricity supply
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER.
9. Do not defeat the safety purpose of the polarised or grounding type plug. A polarised plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
REPLACE THE MAINS FUSE IN THE PLUG WITH ONE OF THE SAME TYPE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug has been damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
SHOCK HAZARD - DO NOT OPEN.
15. Wall or ceiling mounting. Mount the apparatus to a wall or ceiling only as recommended by the manufacturer.
16. Power sources. Connect the apparatus to a power supply only of the type described in the operating
instructions or marked on the apparatus.
MAINS PLUGS
17. Mains plug. Use the mains plug to disconnect the apparatus from the mains supply. The mains plug must be
accessible at all times. Use the mains switch (if applicable) when the apparatus is not in use.
18. Power lines. An outdoor antenna should be located away from power lines.
19. Outdoor antenna grounding. If an outdoor antenna is connected to the apparatus, ensure that the
antenna system is grounded to provide some protection against voltage surges and static build up. In the
USA see article 810 of the National Electrical Code ANSI/NFPA 70 concerning installation requirements.
20. Telephone line. Do not connect the apparatus to a telephone line except where specifically instructed to do so.
21. Objects and liquid entry. Do not let objects or liquids fall into the apparatus. Do not expose the apparatus to
dripping or splashing. Do not place a vessel containing liquid on top of the apparatus.
22. No naked flame sources, such as lighted candles, should be placed on the apparatus.
23. The apparatus has been designed for use in moderate and tropical climates.
This apparatus is supplied with a non-rewireable mains plug for the intended country.
Replacement mains leads can be obtained from your Linn retailer. Should you need to
change the plug please dispose of it carefully. A plug with bared conductors is
dangerous if engaged in a live socket.
The Brown wire must be connected to the Live (Line) supply pin.
The Blue wire must be connected to the Neutral supply pin.
The Green/Yellow wire must be connected to the Earth (Ground) supply pin.
Please contact your retailer or a competent electrician if you are in any doubt.
KOMPONENT 120
Owner’s Manual
i
Download from Www.Somanuals.com. All Manuals Search And Download.
English Important Safety Information
UK USERS PLEASE READ THIS IMPORTANT SAFETY INFORMATION
CE Declaration of Conformity
Linn Products Ltd declare that this product is in conformance with the Low Voltage Directive 73/23/EEC and
Electromagnetic Compatibility 89/336/EEC as amended by 92/31/EEC and 93/68/EEC.
Fuse replacement
This appliance is fitted with a non-rewireable 13 Amp mains plug. The plug contains a 5
Amp fuse. If the fuse has blown it can be replaced as follows:
The conformity of the designated product with the provisions of Directive number 73/23/EEC (LVD) is proved by
full compliance with the following standards:
a) Pull out the red fuse cover/carrier.
b) Remove and dispose of the blown fuse.
c) Fit a new 5 Amp BS1362 approved fuse into the carrier and push the carrier
back into the plug.
Standard number
EN60065
Date of issue
2002
Test type
General requirements
Marking
Hazardous radiation
Heating under normal conditions
Shock hazards under normal
operating conditions
Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug.
Contact your Linn retailer to obtain a replacement fuse cover.
Fuses are for fire protection and do not protect against electric shock.
Insulation requirements
Fault conditions
Mechanical strength
Parts connected to the mains supply
Components
Terminal devices
External flexible cords
Electrical connections and mechanical fixings
Protection against electric shock
Stability and mechanical hazards
Resistance to fire
Mains plug replacement
Should your mains plug need replacing and you are competent to do this proceed as
follows. If you are in doubt contact your Linn retailer or a competent electrician.
a) Disconnect the plug from the mains supply.
b) Cut off the plug and dispose of it safely. A plug with bared conductors is
dangerous if engaged in a live socket.
c) Only fit a 13 Amp BS1363A approved plug with a 5 Amp fuse.
d) The cable wire colours or a letter will be marked at the connection points of most
quality plugs.
Attach the wires securely to their respective points. The Brown wire must go to the Live
pin, the Blue wire must go to the Neutral pin, and the Green/Yellow wire must go to the
Earth pin.
The conformity of the designated product with the provisions of Directive number 89/336/EEC (EMC) is proved by
full compliance with the following standards:
Standard number
EN55013
EN55013
Date of issue
2001
2001
Test type
e) Before replacing the plug top ensure that the cable restraint is holding the outer
sheath of the cable firmly and that the wires are correctly connected.
Conducted emissions
Absorbed emissions
Immunity
EN55020
2002
WARNING
THIS APPLIANCE MUST BE EARTHED.
FCC notice
NOTE:
Waste Electrical and Electronic Equipment (WEEE)
Directive
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Directive 2002/96/EC of the European Parliament and of the Council
The symbol (left) is shown on this product. It indicates that the product should not be
disposed of with regular household waste, but should be disposed of separately.
Electrical and electronic equipment can contain materials that are hazardous to the
environment and human health and therefore should be disposed of at a designated
waste facility or returned to your retailer for the appropriate recycling to take place (see
●
●
●
●
Reorient or relocate the receiving antenna.
If you wish to dispose of this product and the product still functions, please consider
recycling/reusing it by donating it to a charity shop, selling it or part-exchanging it with
your retailer.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
KOMPONENT 120
Owner’s Manual
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright and Acknowledgements English
Copyright and Acknowledgements
Copyright © 2004 Linn Products Ltd. First edition December 2004.
Linn Products Limited, Glasgow, Road, Waterfoot, Eaglesham Glasgow, G76 OEQ,
Scotland, United Kingdom
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of the
publisher.
Trade marks used in this publication: Linn and the Linn logo are registered trade marks
of Linn Products Limited. KOMPONENT, CLASSIK and UNIDISK are trade marks of Linn
Products Limited.
The information in this manual is furnished for informational use only, is subject to
change without notice, and should not be construed as a commitment by Linn Products
Limited. Linn Products Limited assumes no responsibility or liability for any errors or
inaccuracies that may appear in this manual.
Part No: PACK 1029
KOMPONENT 120
Owner’s Manual
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction English
Introduction
KOMPONENT is a revelation in loudspeaker design. Delivering an authentic
playback experience, KOMPONENT combines astounding performance with its
own contemporary style designed to complement your living environment.
KOMPONENT 110
KOMPONENT 106
Centre
Whether your passion is for music or movies, KOMPONENT effortlessly handles
the audio. All loudspeakers in the system have been designed to be free-
standing or installed on a wall, e.g. alongside a flat screen TV.
It is recommended that KOMPONENT is partnered with a Linn disc player, such
as CLASSIK Movie Di or one of our UNIDISK universal disc players, for an
optimised home theatre experience.
The KOMPONENT System
KOMPONENT 104
KOMPONENT 120
Bass Extension Loudspeaker
KOMPONENT 120
Owner’s Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
English Unpacking, Voltage selection and Positioning
Unpacking
Positioning
The KOMPONENT 120 loudspeaker is supplied with the following accessories:
The KOMPONENT 120 loudspeaker can be placed anywhere you find convenient,
but please consider the following points:
●
mains lead
●
phono lead
wall-mounting bracket kit
spike kit
set of floor protectors
●
For best results, position your KOMPONENT 120 loudspeaker as close as
●
possible to either your left front or right front loudspeaker. It can be
floor-mounted, shelf-mounted or (using the bracket supplied) wall-
mounted.
●
●
●
warranty card
●
this manual
wall bracket assembly instructions
●
Experimenting with the position may be necessary in order to match the
sound of the KOMPONENT 120 loudspeaker with other loudspeakers in
your system and the acoustics of the room.
●
We recommend that you retain the packaging in case you need to transport the
KOMPONENT 120 loudspeaker at a later date.
Whichever mounting method you employ, ensure that the KOMPONENT 120 is
held or positioned rigidly, in order to ensure that the movement of the drive
units is converted to sound energy, rather than cabinet movement (in the form
of vibration, wobble etc.).
Voltage selection
WARNING – Ensure the mains supply is disconnected.
The KOMPONENT 120 is factory-set for a 230 volt mains supply and must not be
connected to a mains supply other than this before it is adjusted for your local
voltage.
Replacing the fuse in the KOMPONENT 120 speaker
Should the mains fuse blow, replace it only with an equivalent part (see table
below). The fuse holder is located just below the mains inlet socket. To replace
the fuse, disconnect the product from the mains supply, remove the fuse using
a flat blade screwdriver, insert a new fuse. If the fuse blows a second time there
is a fault in the product; contact your local retailer.
UP
DOWN
FEATURE
Fuse selection table
MAINS INPUT VOLTAGE FUSE TYPE
100V
115V
125V T6.3AL
125V T6.3AL
250V T3.15AL
230V
KOMPONENT 120
Owner’s Manual
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting English
Connecting to a stereo pre-amplifier and power amplifier
Connecting
if used with small (limited bass response) loudspeakers.
IMPORTANT:
Do not turn on the mains supply until you have connected all other
components.
TO POWER AMP
Connecting to an AV processor:
FILTERED
OUTPUT
LINE
OUTPUT
KOMPONENT 120
CLASSIK MOVIE DI
OR AV PROCESSOR
LINE
INPUT
FILTERED
OUTPUT
LINE
OUTPUT
FROM STEREO PRE-AMP
LINE
INPUT
NOTE:
In the above configuration the KOMPONENT 120 loudspeaker is being used to
stop low bass notes being sent to the main speakers.
Connecting to another KOMPONENT sub loudspeaker
Connecting to a stereo pre-amplifier
KOMPONENT 120
KOMPONENT 120
if used with large (full-range frequency response) loudspeakers.
FILTERED
OUTPUT
FILTERED
OUTPUT
LINE
LINE
OUTPUT
OUTPUT
FILTERED
OUTPUT
LINE
LINE
INPUT
INPUT
FROM
STEREO PRE-AMP
FROM
STEREO PRE-AMP
FROM CLASSIK MOVIE DI
OR OTHER AV PROCESSOR
LINE
OUTPUT
KOMPONENT 120
KOMPONENT 120
OR
LINE
INPUT
FILTERED
OUTPUT
FILTERED
OUTPUT
LINE
LINE
OUTPUT
OUTPUT
FROM STEREO PRE-AMP
LINE
LINE
INPUT
INPUT
Once all the other connections have been made, connect the KOMPONENT
120 loudspeaker to a mains supply using the mains lead provided.
KOMPONENT 120
Owner’s Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
English Cleaning, Operating modes and Parameters
Cleaning
Parameters
Disconnect the KOMPONENT 120 loudspeaker from the power supply before
cleaning.
The KOMPONENT 120 loudspeaker is equipped with four adjustable parameters
(features) that enable you to alter its performance to suit your taste.
Remove dust and fingerprints with a soft, dry cloth. Avoid using domestic
cleaning products on the unit.
NOTE:
The parameters can only be adjusted when the KOMPONENT 120 loudspeaker is
not in standby mode.
Operating modes
SYMBOL
MODE
MEANING
UP
DOWN
FEATURE
Standby
The unit is waiting for an audio signal
In this mode the unit consumes
minimal power. The unit will enter
standby mode ten minutes after audio
input ceases.
On
The unit is fully powered-up
The unit will enter this mode as soon
as it receives an audio signal.
Adjusting the parameters
Thermal
Standby
The unit has overheated
To select the parameter you wish to adjust:
During very demanding, sustained use
the unit will go into Thermal Standby
mode in order to allow itself to cool
down. When in this mode the unit will
not produce any sound. The unit will
return to On mode when its
●
Hold FEATURE.
●
Repeatedly press UP or DOWN until the letter for the desired parameter
appears.
●
Release FEATURE.
●
Repeatedly press UP or DOWN to change the setting.
temperature has dropped to its
operating level.
NOTE:
A few seconds after releasing the last key, the display changes to
To restore the factory defaults:
●
Disconnect the KOMPONENT 120 loudspeaker from the mains supply
and wait for the display to go blank.
●
While holding FEATURE reconnect the mains supply.
●
Continue to hold FEATURE until the display shows
KOMPONENT 120
Owner’s Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Parameters English
Main parameters
SYMBOL
FUNCTION
RANGE
Gain (volume)
1 to 7 (default is 4)
If you wish to increase the
volume of the KOMPONENT
120 loudspeaker compared
with your other loudspeakers,
increase the setting. If you
wish to lower the volume,
decrease the setting.
Phase
0 or 1 (default is 0)
Depending on your seating
distance from the
KOMPONENT 120 loudspeaker
and your other loudspeakers,
you may attain better sound
quality by switching this
setting.
Additional parameters
SYMBOL
FUNCTION
RANGE
High pass frequency*
1 to 9 (default is 5)
Increasing/decreasing the
setting reduces/increases the
amount of bass sent to the
other speakers
Low pass frequency
1 to 4 (default is 3)
If set to 4 all frequencies
are passed through, i.e.
no filtering of the signal
takes place.
Decreasing the setting lowers
the highest frequency
produced by the unit.
* For use when the KOMPONENT 120 speaker is connected to a power amplifier
(see Connecting section). If a power amplifier is not used, leave set at 5.
KOMPONENT 120
Owner’s Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
English Guarantee and Service
Guarantee and Service
Linn Products Limited
Glasgow Road
Waterfoot
Eaglesham
Glasgow G76 0EQ
Scotland, UK
This product is guaranteed under the conditions which apply in the country
of purchase and your statutory rights are not limited. In addition to any
statutory rights you may have, Linn undertake to replace any parts which
have failed due to faulty manufacture. To help us, please ask your Linn
retailer about the Linn warranty scheme in operation in your country.
Phone:
Fax:
Helpline:
Email:
+44 (0)141 307 7777
+44 (0)141 644 4262
0500 888909
In parts of Europe, the United States of America and some other markets,
extended warranty may be available to customers who register their
purchase with Linn. A warranty registration card is included with the
product and should be stamped by your retailer and returned to Linn as
soon as possible. Alternatively, you can register your warranty online at
Website:
Linn Incorporated
8787 Perimeter Park Boulevard
Jacksonville
Warning
FL 32216
USA
Unauthorised servicing or dismantling of the product invalidates the
manufacturer’s warranty. There are no user serviceable parts inside the
product and all enquiries relating to product servicing should be referred
to authorised retailers only.
Phone:
Fax:
Helpline:
Email:
+1 (904) 645 5242
+1 (904) 645 7275
888-671-LINN
Website:
Technical support and information
For technical support, product queries and information, please contact
either your local retailer or one of the Linn offices opposite.
Linn Deutschland GmbH
Albert-Einstein-Ring 19
22761 Hamburg
Deutschland
Full details of your local retailer/distributor can be found on the Linn web
Phone:
Fax:
+49-(0) 40-890 660-0
+49-(0) 40-890 660-29
Email:
Website:
Important
●
Please keep a copy of the sales receipt to establish the purchase
date of the product.
●
Please ensure that your equipment is insured by you during any
transit or shipment for repair.
KOMPONENT 120
Owner’s Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|