SNEAKY MUSIC DS
NETWORK MUSIC PLAYER
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
CONTENTS
INTRODUCTION
1
INSTALLATION
Unpacking
Positioning
Cleaning
Connecting to the mains supply
Amplifier protection
2
2
2
2
2
2
OPERATION
Playing music
3
3
5
5
5
6
6
6
Controlling playback
Current Playlist
Volume
Standby
Using a handset
Adding music to the library
GUARANTEE AND SERVICE
7
8
THIRD PARTY COPYRIGHT INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
INTRODUCTION
Linn Products have been known for over 35 years as a manufacturer of class-
leading hi-fi equipment. Over the years we have always been keen to push
the boundaries of new technology, whether developed from advancements in
the audio industry, such as improvements in digital-to-analogue conversion,
or from the electronics industry, such as our highly efficient Switch Mode
Power Supply - all in order to get you closer to the music you love.
The Sneaky Music DS network music player epitomises our ideal by
converting a digital signal streamed over a standard Ethernet network, to
high quality analogue audio. Developed from our flagship Klimax DS player,
it utilises sophisticated processing of the digital audio signal drawn from an
external storage device to produce crystal-clear, error-free music.
With its on-board volume control and power amplifier, once you have your
network set up all you have to do is connect the Sneaky Music DS to a pair of
Linn loudspeakers to enjoy your CD and downloaded music collection, and
SHOUTcast Internet radio, like you have never heard them before.
Welcome to the future of music…
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
INSTALLATION
Cleaning
Disconnect the Sneaky Music DS from the power supply before cleaning.
Remove dust and fingerprints with a soft, dry cloth.
Unpacking
The Sneaky Music DS is supplied with the following:
•
•
•
•
2 x red, 2 x black BAF loudspeaker connectors
mains lead
4 rubber feet
CD-ROM (contains system software, installation manual and
owner’s manual)
Connecting to the mains supply
The Sneaky Music DS contains an automatic internal mains voltage switch.
This switch operates on all worldwide mains voltages from 100 V to 240 V. The
unit can be connected to any worldwide mains voltage with no adjustment.
This unit must be earthed. Use the earthed moulded mains lead supplied,
or if no mains earth is available, ensure the product’s EARTH GROUND
connector is connected to an earthing terminal.
We recommend that you retain all packaging in case you need to transport
the Sneaky Music DS at a later date.
Positioning
Amplifier protection
The Sneaky Music DS features two methods of protecting its internal power
amplifier from damage.
You can position the Sneaky Music DS almost anywhere you find convenient,
but please consider the following points:
• The unit should be placed on a flat, stable and rigid surface.
• Allow at least 4" (10 cm) free space above and at each side of the unit for
air circulation.
• Do not position the unit where sunlight can shine (whether directly,
diffused or reflected) on its front surface as the infra-red (IR) radiation
in sunlight will be picked up by the unit’s IR remote sensor and this can
adversely affect its operation. Similarly, some electrical devices such as
plasma TVs, fluorescent lights and energy saving lamps can emit IR which
can likewise affect the operation.
• For best performance do not stack the unit with other products. Ideally,
position the unit on a shelf by itself or, if proximity to other products is
unavoidable, positioning side-by-side is preferable to stacking.
• The unit should not be situated above, or directly adjacent to, sources
of heat such as radiators, other power amplifiers, etc. Nor should it be
enclosed in a cabinet with such devices.
Short-circuit protection
If the speaker outputs are accidently short-circuited, the power amplifier
will shut down instantly and will remain in that state until the short-circuit is
rectified.
Over-temperature protection
If the power amplifier’s temperature rises above its safe operating limit, it
will cease operation until the temperature drops to a safe level and will then
automatically resume.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
OPERATION
3. From the Source window select ‘Sneaky Music DS’.
Playing music
Ensure the network is on and the NAS has finished booting. Turn the Sneaky
Music DS on. The Linn badge on the front panel will flash on and off. Wait
until the flashing stops, then follow the instructions below.
1. Turn on your control device. If the Linn GUI does not run automatically,
run the Linn GUI software from the Programs menu.
2. From the Room window select the appropriate room. This will
automatically bring your Sneaky Music DS out of standby (the Linn badge
will brighten).
4. From the Library window select the storage device that contains
the music you want to listen to by tapping it twice.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
5. Tap ‘Music’ twice.
7. Scroll to the music you want to play by placing the control device’s
stylus in the left-hand window and ‘drawing’ circles (clockwise to scroll
downwards, anti-clockwise for upwards).
Note:
When using the Linn GUI tap
in the top of the left-hand window to
return to the previous screen.
8. The folder symbol
indicates that an item contains sub items (e.g. a
6. Select the category you want to browse by tapping it twice.
folder will be shown next to the name of an album to indicate that the
album’s tracks are held within the folder). Tap an item to highlight it, then
tap it again to reveal the contents of the folder.
9. To play an album, track, or all tracks by a particular artist (depending on
the view you are currently on), tap the selection to highlight it, then tap
.
Your selection will move to the Current Playlist window and playback will
begin.
Alternatively, tap the
window. To start playback, tap the selection within the Current Playlist
window to highlight it, then tap
symbol to add the selection to the Current Playlist
.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
10.Continue to add selections to the Current Playlist by highlighting artists/
albums/tracks and tapping the symbol. You can add new selections to
the bottom of the playlist, or place them after the currently playing track
(if playback has not started they will be added to the top of the playlist).
The icon shown at the bottom-right of the left-hand window determines
Current Playlist
Scroll up and down through the playlist by placing the control device’s stylus
in the Current Playlist window and ‘drawing’ circles (clockwise to scroll
downwards, anti-clockwise for upwards).
where the selection will be placed. This icon
will be placed at the bottom of the playlist. This icon
means that the selection
means that the
Play any track in the Current Playlist by highlighting it, then tapping
Playback of the playlist will continue from that point.
.
selection will be placed after the currently playing track. Tap the icon to
change it.
Note:
The tracks in the Current Playlist will remain there if the Sneaky Music DS is
Note:
put into then brought out of standby.
Up to 1,000 tracks can be added to the Current Playlist. The bar at the
bottom of the Current Playlist window tells you how many tracks are in the
playlist.
To delete individual tracks from the playlist:
• Tap on the track you wish to delete.
• Tap the symbol next to the track’s title.
Controlling playback
Control playback using the
To delete the entire playlist:
icons.
• Tap the
symbol at the top-right of the Current Playlist window.
While a track is playing, tapping
will restart it unless another selection is
currently highlighted in which case the highlighted track will begin playing.
Volume
Use the
icons on the Linn GUI to control volume.
Tap on the progress bar to jump forward or backwards within the currently
playing track.
Volume range is from 0 to 100.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
Standby
Using a handset
To put the Sneaky Music DS into standby using the Linn GUI, tap the
Once you have added tracks to the Current Playlist, you can use a Linn
handset to control playback and adjust volume. Point the handset at the
front of the Sneaky Music DS or, if connected, at a Linn Knekt RCU or
Basik 3 IR.
source/room key at the top-right of the GUI, then tap the
appropriate room, in the left-hand window (the Linn badge on the front panel
will dim).
icon for the
Accepted handset commands
Standby
Play
Pause
Stop
Skip forward
Skip back
Volume +
Volume -
Mute
Note:
You can control playback of the Current Playlist using the handset even if the
Linn GUI has been turned off.
Note:
The tracks in the Current Playlist will remain there if the Sneaky Music DS is
put into then brought out of standby.
Adding music to the library
If you wish to add a CD to your music library, insert the CD into the PC that is
connected to your storage device (NAS) and, using the Ripstation Micro DS
software, rip the CD. Once the CD has been ripped it will automatically be
added to the music library on the Linn GUI.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
GUARANTEE AND SERVICE
This product is guaranteed under the conditions which apply in the country of
purchase and your statutory rights are not limited. In addition to any statutory
rights you may have, Linn undertake to replace any parts which have failed
due to faulty manufacture. To help us, please ask your Linn retailer about the
Linn warranty scheme in operation in your country.
Linn Products Limited
Glasgow Road, Waterfoot, Eaglesham, Glasgow G76 0EQ, Scotland, UK
Phone: +44 (0)141 307 7777
Fax: +44 (0)141 644 4262
Helpline: 0500 888909
Email: [email protected]
In parts of Europe, the United States of America and some other markets,
extended warranty may be available to customers who register their purchase
Linn Incorporated
8787 Perimeter Park Boulevard, Jacksonville, FL 32216, USA
Phone: +1 (904) 645 5242
Fax: +1 (904) 645 7275
Helpline: 888-671-LINN
Email: [email protected]
WARNING
Unauthorised servicing or dismantling of the product invalidates the
manufacturer’s warranty. There are no user serviceable parts inside the
product and all enquiries relating to product servicing should be referred to
authorised retailers only.
Technical support and information
For technical support, product queries and information, please contact either
your local retailer or one of the Linn offices opposite.
Linn Deutschland GmbH
Hühnerposten 1d, D-20097 Hamburg, Deutschland
Phone: +49-(0) 40-890 660-0
Fax: +49-(0) 40-890 660-29
Email: [email protected]
Full details of your local retailer/distributor can be found on the Linn web site:
Important
Please keep a copy of the sales receipt to verify the purchase date of the
product.
Please ensure that your equipment is insured by you during any transit or
shipment for repair.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
THIRD PARTY COPYRIGHT INFORMATION
Flac from the Xiph.org foundation:
Copyright © 2000,2001,2002,2003,2004,2005,2006,2007 Josh Coalson
The Sneaky Music DS uses software from rtems.com, the Xiph.org
foundation, and FreeBSD.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
Rtems.com:
LICENSE INFORMATION
• Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
• Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
RTEMS is free software; you can redistribute it and/or modify it under terms
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version. RTEMS is
distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more
details. You should have received a copy of the GNU General Public License
along with RTEMS; see file COPYING. If not, write to the Free Software
Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
As a special exception, including RTEMS header files in a file, instantiating
RTEMS generics or templates, or linking other files with RTEMS objects to
produce an executable application, does not by itself cause the resulting
executable application to be covered by the GNU General Public License.
This exception does not however invalidate any other reasons why the
executable file might be covered by the GNU Public License.
A copy of the GPL is included on the accompanying CD-Rom in the licenses
directory.
Information on obtaining access to the GPL code used in this product is
Alternatively, write to Open Source Software Licensing, Linn Products
Limited, Glasgow Road, Waterfoot, Eaglesham, Glasgow G76 0EQ,
Scotland, UK
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SNEAKY MUSIC DS
OWNER’S MANUAL
FreeBSD:
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
The RTEMS TCP/IP stack is a port of the FreeBSD TCP/IP stack.
The following copyright and licensing information applies to this code.
Copyright © 1980, 1983, 1988, 1993
The Regents of the University of California. All rights reserved.
Portions Copyright © 1993 by Digital Equipment Corporation.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
Permission to use, copy, modify, and distribute this software for any purpose
with or without fee is hereby granted, provided that the above copyright
notice and this permission notice appear in all copies, and that the name
of Digital Equipment Corporation not be used in advertising or publicity
pertaining to distribution of the document or software without specific, written
prior permission.
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
THE SOFTWARE IS PROVIDED “AS IS” AND DIGITAL EQUIPMENT CORP.
DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT CORPORATION BE
LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment: This product includes software
developed by the University of California, Berkeley and its contributors.
4. Neither the name of the University nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS
“AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|