Connecting the Wireless-B
Ethernet Bridge for Setup
Setting up the Wireless-B
Ethernet Bridge
1
2
®
A Division of Cisco Systems, Inc.
A
B
Attach the Bridge’s antenna.
A
Insert the Setup CD-ROM into
your PC’s CD-ROM drive. The
Setup Utility should run
Plug the included Ethernet
network cable into the LAN port
on the back panel of the
Bridge.
automatically, and the
Welcome screen should
appear. If it does not appear,
click the Start button and
choose Run. In the field that
appears, enter D:\setup.exe (if
“D” is the letter of your CD-ROM
drive).
B
C The X-II (MDI/MDI-X) slide switch
offers a choice between two
settings. Slide the X-II switch to
the X position if you are
A
connecting the Bridge to a
PC’s network adapter. Slide the
X-II switch to the II position if
you are connecting the Bridge
to a hub or switch.
B
Click Setup to begin the setup
process.
C Make sure the Bridge is
correctly connected to your
wired network. Click Next.
C
D
D
E
Plug the other end of the
Ethernet network cable into the
RJ-45 port of the hub, switch,
or PC you wish to use to
configure the Bridge.
D
The screen displays a list of
Wireless-B Ethernet Bridges on
your network, along with their
status information. Select the
Bridge you are currently
installing by clicking its name in
the Selection box. Click Yes.
Plug the supplied power
adapter into the Power port on
the back panel of the Bridge.
Then plug the other end into
an electrical outlet.
Package Contents
• Wireless-B Ethernet Bridge
• Quick Installation Guide
• Setup CD-ROM
• User’s Guide on CD
• Detachable Antenna
• Power Adapter
E
E
The Password screen will
appear. In lowercase letters,
enter admin in the Password
field. Then click Enter.
• Network Cable
• Registration Card
E
GHz
802.11b
Wireless-B
Ethernet Bridge
Wireless
Quick Installation
WET11
Download from Www.Somanuals.com. All Manuals Search And Download.
Model No.
|