200 SERIES
LINK ELECTRONICS, INC.
PRECISION AUDIO DA
MODEL PAA - 652
MADE IN THE USA
FEATURES
‹ Low Noise
‹ Differential Input
‹ Gain Range ±16 dB
‹ Eight Outputs, PFM-220
The PAA-652 mono audio distribution amplifier is
another member of the 600 series products, and is
designed to reflect the latest in the state of the art
in engineering techniques. The PAA-652 is an
extremely versatile audio amplifier, offering
outstanding performance. The inputs and outputs
use captive screw clamp terminals located on the
matching rear cell assembly. The rear cell model
PAA-600 is a separate item and should be
purchased independently.
The PAA-652 is well suited for any type of
operation. The input is balanced bridging, but can
be terminated into 150 or 600 ohms.
An
unbalancedinputis converted to balancedoutputs.
The transmission path of the PAA-652 is virtually
transparent.
The features include 100dB of Signal-to-Noise
ratio, .05 dB frequency response from 20 Hz to 20
KHz, and .03% total harmonic distortion from 20
Hz to 20 KHz. The isolation between modules is
greater than 100 dB. A gain control on the front
panel allows for gain adjustment of ±16dB. The
PAA-652/1operatesinthePFM-220frameholding
up to four (4) modules.
The PAA-652/1 provides eight high performance
low impedance mono outputs. The input is over
voltage protected for up to 120 volts AC or DC.
LINK
ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668
Phone 573 334 4433 FAX 573 334 9255
‹
Download from Www.Somanuals.com. All Manuals Search And Download.
|