800 SERIES
LINK ELECTRONICS, INC.
AES AUDIO SWITCH MATRIX
MODEL 816-OP/D
MADE IN THE USA
816-OP/E Balanced Connector Panel
AES Audio Switching Matrix
816-OP/F Unbalanced BNC Panel
The AVS-816 has eight options to configure the unit to be Analog, SD/SDI or HD/SDI for Video and Audio. The
audio can be configured for AES or Analog. The 816-OP/D is the AES/EBU audio plug-in board. The AVS-816
chassis and the 816-OP/D board make up an AES/EBU audio only switcher. NOTICE, you must choose the
rear connector option for BNC or Balanced. Options 816-OP/F is the BNC unbalanced input. Option 816-OP/E
is the balanced 3-Pin connector.
You must select the AES audio matrix and video matrix to make up the desired switcher format. You have the
choice of analog or AES audio. In the case of AES audio, you have the option of BNC unbalanced or Plug-in
3-pin Weco balanced connectors. You can choose the 816-OP/D, AES plus the connector board for an audio
switcher only. The AES matrix has one AES output and one analog output for monitoring.
Software is supplied with all AVS series to control up to 32 switchers from a single computer. See data sheets
for the AVS-816/SA analog switcher and AVS-816/SD for SD SDI system switcher. A remote control is
available for the unit, model PSR-816. The plug-in choices are:
AVS-816, Chassis, power supply and motherboard
816-OP/A, Analog video matrix, 16X1, two outputs
816-OP/B, Analog audio matrix, 16X1, two outputs
816-OP/C, SD SDI video matrix, 16X1, one SD SDI and one analog
816-OP/D, AES audio matrix, 16X1, one AES and one analog
816-OP/E, AES rear panel for Weco 3-pin connectors
816-OP/F, AES rear panel for BNC connectors
816-OP/G, GPI option
816-OP/HD, HD/SD SDI video matrix, 16X1, two outputs
Customer selects the above desired options, and the factory configures to your requirement.
LINK
ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668
Phone 573 334 4433 FAX 573 334 9255
‹
Download from Www.Somanuals.com. All Manuals Search And Download.
|