Linear Universal Remote DF 41 EC User Manual

1. REMOTE CONTROL DETAIL  
2. PROGRAM REMOTE CONTROL INTO CONSOLE  
DF-41/EC  
DF-42/EC  
CONTROLS  
HOME AUTOMATION  
OUTPUT  
START IN  
OFF MODE  
SEND SIGNAL  
FROM REMOTE  
ARMS &  
DISARMS  
CONSOLE  
ENTER YOUR  
SECRET CODE  
PRESS  
LEARN UNUSED SENSOR  
NUMBER  
ENTER AN  
KEYCHAIN  
REMOTE  
LEARN BUTTON  
CONTROL  
For Use With DF-16/EC  
Security Console  
Operation  
Instructions  
1
TWO BUTTON  
REMOTE CONTROL  
PRESS BUTTON  
TO SEND SIGNAL  
(EITHER BUTTON  
ON TWO BUTTON  
REMOTE)  
HOLD OFF BUTTON  
FOR 3 SECONDS WHEN  
FINISHED TO EXIT  
LEARN MODE  
ONE BUTTON  
REMOTE CONTROL  
(760) 438-7000 • FAX (760) 438-7043  
3. TEST REMOTE CONTROL  
4. REPLACING BATTERIES  
5. REPLACING BATTERIES  
PRESS ONCE TO ARM CONSOLE TO AWAY MODE  
PRESS AGAIN TO DISARM CONSOLE TO OFF MODE  
REMOVE TWO  
WARNING:  
HOLD BOARD BY  
HOLD CASE TOGETHER  
AND FLIP OVER  
CASE SCREWS  
CAREFULLY  
ONE CHIRP FOR ARM  
TWO CHIRPS FOR DISARM  
REMOVE THE  
CIRCUIT BOARD  
EDGES ONLY  
ONE  
BUTTON  
REMOTE  
PRESS FOR HOME AUTOMATION ON  
PRESS AGAIN FOR H/A OFF  
BOARD  
ALIGNMENT  
POSTS  
CAREFULLY  
LIFT TOP OF  
CASE OFF  
ONE BING FOR H/A ON  
ONE BING FOR H/A OFF  
NOTE BATTERY  
LOCATIONS  
REPLACE THE REMOTE CONTROL BATTERIES WHEN  
THE UNIT ONLY WORKS CLOSE TO THE CONSOLE OR IF  
IT STOPS WORKING ALTOGETHER  
TWO  
BUTTON  
REMOTE  
NOTE: PRESSING BOTH BUTTONS FOR  
5 SECONDS ON THE TWO BUTTON REMOTE  
WILL SOUND THE EMERGENCY SIREN  
6. REPLACING BATTERIES  
7. REPLACING BATTERIES  
INTERNATIONAL WARRANTY  
This Linear product is warranted against defects in material and workmanship for twelve (12) months. The Warranty Expiration Date is labeled on  
the product. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels.  
Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty,  
if any. There are no obligations or liabilities on the part of Linear Corporation for consequential damages arising out of or in connection  
with use or performance of this product or other indirect damages with respect to loss of property, revenue, or profit, or cost of  
removal, installation, or reinstallation. All implied warranties, including implied warranties for merchantability and implied warranties  
for fitness, are valid only until Warranty Expiration Date as labeled on the product. This Linear Corporation Warranty is in lieu of all  
other warranties express or implied. For warranty service on Linear equipment return product, at sender’s expense to:  
Linear Hong Kong 19/F Hounor Industrial Centre, 6 Sun Yip StreetChai Wan, Hong Kong  
CAUTION: DO NOT  
TOUCH OR ADJUST  
ANY PARTS ON BOARD  
WARNING: DO NOT  
INSTALL BATTERIES  
BACKWARDS, UNIT  
WILL BE DAMAGED!  
PLACE BOARD  
ON ALIGNMENT  
POSTS  
PLACE FRESH BATTERIES  
ON SPRING IN HOLDER  
Attention: Repairs Department  
REPAIRS POLICY  
Charges will be made for equipment that is not in warranty, shows customer abuse, or is damaged by the effects of lightning, water, fire, or other  
abnormal happenings.  
Customer’s equipment sent in for repair may be repaired or replaced with new or remanufactured equipment at Linear’s discretion.  
The customer is always responsible for shipping and handling charges to the repairs facility. Linear will pay return shipping and handling charges  
on “in warranty” products shipped back to the customer. The customer will be billed for the return shipping and handling charges on “out of  
warranty” products.  
SQUEEZE  
CASE TOGETHER,  
FLIP OVER AND  
REPLACE SCREWS  
HOOK CASE  
HALVES  
TOGETHER  
There will be a 50% expedite fee for any express requests.  
PLUS (+) SIDE UP  
The International Sales Manager must be notified prior to the return of product to Linear. All international returns must have an International Repair  
Authorization number (IRA#). The number must be marked on all packages. Failure to do so will cause delays in processing.  
IMPORTANT !!!  
MINUS (-) SIDE UP  
Linear radio controls provide a reliable communications link and fill an important need in portable wireless signaling. However, there are some  
limitations which must be observed. The radios are required to comply with local rules and regulations as radio devices. As such, they have limited  
transmitter power and therefore limited range.  
A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals that occur on or near their operating  
frequencies, regardless of code settings.  
Changes or modifications to the device may void regulatory compliance. Infrequently used radio links should be tested regularly to protect against  
undetected interference or fault. A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or dealer,  
and these facts should be communicated to the ultimate users.  
BE SURE  
BATTERY SPRING  
IS IN PLACE  
R&TTE VAEE 27800, EMC, SFT, ETS  
BATTERY TYPE  
CR1616, CR1620  
OR DL1620  
Linear Corporation declares that the apparatus DF-41/EC and DF-42/EC  
complies with the essential requirements and other relevant provisions  
of Directive 1995/5/EC.  
Copyright © 2003 Linear Corporation  
220101 A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kuhn Rikon Utility Trailer 3115 User Manual
Kustom Stereo Amplifier KAA16 User Manual
Kyocera Cell Phone K9 User Manual
La Crosse Technology Clock WT 2150A User Manual
Linksys Switch EF1324 User Manual
LOREX Technology Security Camera SG7215P User Manual
Makita Cordless Sander BO4555 User Manual
Makita Impact Driver 6909D User Manual
Marantz Network Card RX9001 User Manual
Melissa Styling Iron 235 024 User Manual