Lindy Switch 32251 User Manual

LINDY CPU Switch Smart SUN-MAC-PC

Installation and Use

Part

Model

32251

LINDY CPU Switch Smart SUN-MAC-PC

CPU Switch Smart - Installation and Use

First Edition (January 2002)

Part Number 32251

Download from Www.Somanuals.com. All Manuals Search And Download.

Kurzanleitung

Ins tallation & Betrieb

EIGENSCHAFTEN

Am LINDY CPU Switch SMART SUN-MAC-PC können auch im gemischten Betrieb

Rechner aus vers chiedenen Welten gleichzeitig betrieben werden. So können sowohl

SUN Rechner mit Mini-DIN-8 Tastatur/Maus (sowie mit zukünftigen USB Schnittstellen) und

VGA (HD-15 oder 13W3) Anschluss betrieben werden, wie auch gleichzeitig PCs mit USB,

PS/2 und VGA sowie moderne MACs mit USB und VGA.

Auf der Eingabeseite (Bedienkonsole, Arbeitsplatz) finden Tastaturen und Mäuse aus der

PC-Welt (PS/2 Maus/Tastatur, SVGA Monitor) sowie aus der SUN Welt (SUN Tastatur,

Maus, SUN SVGA Monitor) Anschluss.

Der LINDY CPU Switch SMART SUN-MAC-PC unterstützt die Audioans chlüs s e aller

angeschlossenen Rechnersysteme für Lautsprecher und Mikrofon in Voll-Stereo.

Er unterstützt Monitorauflösungen bis 1900x1440 bis 75Hz sowie DDC Monitorerkennung.

Der LINDY CPU Switch benötigt bei Kabellängen unter 5m kein Netzteil. Werden größere

Kabellängen benötigt, so sollte ein optional erhältliches Netzteil verwendet werden; hiermit

können in den meisten Fällen auch noch Kabellängen bis 20m realisiert werden. Beachten

Sie bitte, dass für USB Geräte ab 5m Distanz „Aktivverlängerungen / Active Extension

Cable“ (LINDY Art.Nr. 32853 oder 42800) eingesetzt werden müssen.

Der LINDY CPU Switch emuliert für alle angeschlossenen Rechner permanent Monitor,

Maus und Tastatur. Dies sorgt dafür, dass zwischen den angeschlossenen Rechnern

beliebig oft hin und her geschaltet werden kann, ohne dass die Rechner das Maus- bzw.

Tastatursignal verlieren und neu gebootet werden müssen.

KURZANLEITUNG INSTALLATION

Schalten Sie alle anzuschliessenden Computer aus und schliessen Sie sie an die

ORANGEFARBENEN Ports auf der Rückseite des CPU Switch SMART SUN-MAC-PC an.

Der Rechneranschluss kann nur über Systemkabel erfolgen (LINDY Art.Nr.n in Klammern):

PS/2-SVGA-Audio: 2m (32951), 5m (32953)

USB-SVGA-Audio: 2m (32955), 5m (32957)

SUN-SVGA-Audio: 2m (32961), 5m (32963)

Sollten größere Kabellängen benötigt werden, so empfehlen wir die Verwendung der

LINDY 3-in-1 Kombi-Tastatur/Video/Maus-Verlängerungskabel sowie bei Bedarf LINDY

Audio-Verlängerungskabel. Verwenden Sie in diesen Fällen das optionale Netzteil falls

Probleme auftreten.

Serielle PC-Mausanschlüsse (COM-Port, Sub-D-9) werden nur mit dem korrekten

Mausadpter (z.B. LINDY Art.Nr. 70058) unterstützt (nähere Angaben im ausführlichen

englischen Handbuch).

Schließen Sie Ihre Tastatur, Monitor, Maus, Lautsprecher und Mikrofon an den GRAUEN

Ports auf der Rückseite des CPU Switch SMART an.

CPU Switch Smart SUN-MAC-PC

GERMAN

Download from Www.Somanuals.com. All Manuals Search And Download.

ZUSAMMENFASSUNG DES HANDBUCHES

Die Voreinstellungen (Defaultkonfiguration) des CPU Switch SMART ist für die meisten

Einsatzzwecke geeignet. Der CPU Switch SMART SUN-MAC-PC kann über die

angeschlossenen Rechner mit Strom versorgt werden. Beim Anschluss mehrerer Rechner

wird die Stromentnahme auf alle Rechner verteilt, so dass auch das Abschalten einzelner

Rechner kein Problem darstellt.

Der Computer, auf dem gearbeitet werden soll, kann auf verschiedene Arten ausgewählt

werden: entweder durch Drücken der Kanalwahltas te auf der Frontblende, durch Drücken

einer Hotkey-Tas tenkombination auf der Tastatur oder durch eine 3-Tas ten-Maus .

Um einen Computer per Tastatur-Hotkey auszuwählen werden die Strg und ALT Tasten

sowie die erforderliche Port-Taste (z.B. 1 ) gleichzeitig gedrückt.

Zum Umschalten zwischen den angeschlossenen Rechnern mit der Maus müssen die

mittlere Taste der Maus und gleichzeitig die linke oder rechte Taste kurz gedrückt werden.

Der LINDY CPU Switch SMART SUN-MAC-PC bietet die Möglichkeit, viele integrierte

Optionen wie Umschalt-Hotkey, Bildschirmschoner, Passwort, AutoScan-Modus, SUN-

Tastatur-Einstellung weitgehend zu konfigurieren. Informationen hierzu finden Sie im

ausführlichen englischen Handbuch.

Weitere Hinweise finden Sie dort auch zu den Themen:

Problembehebung

Kaskadierung mehrerer CPU Switches

Hot-Plugging von Rechnern am CPU Switch

Einstellungen für das Mausprotokoll

Mouse Recovery nach Verlust des PS/2 Maussignals an einem der angeschlossenen PC

Mouse Recovery nach Abziehen der Maus vom CPU Switch

Flash-Upgrade der Firmware

Sicherheits technis che Informationen

Nur für den Gebrauch innerhalb von trockenen Räumen vorgesehen.

Die Wartung des CPU Switch SMART SUN-MAC-PC darf ausschließlich von dazu

qualifiziertem Fachpersonal vorgenommen werden.

Sämtliche Warnhinweise und Anweisungen auf dem CPU Switch SMART SUN-MAC-PC,

seinem Netzteil und Zubehörteilen sind zu beachten und befolgen.

Warnung – im Netzteil sind unter Spannung stehende Teile enthalten, es darf nicht

geöffnet werden.

Das Netzteil darf nur durch ein von LINDY zugelassenes ersetzt werden.

CPU Switch Smart SUN-MAC-PC

GERMAN

Download from Www.Somanuals.com. All Manuals Search And Download.

Guía rápida de ins talación y funcionamiento

INSTALACIÓN RÁPIDA

Desconecte todos los ordenadores y conéctelos a los puertos NARANJA en la parte

posterior del CPU Switch Smart SUN-MAC-PC. Para mayor comodidad se recomiendan

cables combinados 3-en-1 teclado/vídeo/ratón.

Conecte el teclado, el monitor y el ratón al puerto GRIS en la parte posterior del CPU

Switch Smart.

RESUMEN DE LA GUÍA DE FUNCIONAMIENTO

La configuración por defecto del CPU Switch Smart es adecuada para la mayoría de los

sistemas.

Puede seleccionarse un ordenador utilizando la tecla del panel frontal, un ratón de tres

botones o una combinación de teclas rápidas en el teclado. Para seleccionar un

ordenador utilizando el ratón, pulse y suelte los botones izquierdo o derecho mientras

mantiene pulsado el botón del medio. Para seleccionar un ordenador utilizando las

teclas rápidas del teclado, mantenga pulsadas las teclas CTRL y ALT, pulse y suelte la

tecla del puerto requerida (p.e. 1) y a continuación suelte las teclas CTRL y ALT.

Información s obre s eguridad

Solamente debe usarse en interiores, en entornos secos y sin grasa.

No intente realizar ningún tipo de mantenimiento al CPU Switch Smart SUN-MAC-PC

usted mismo.

Siga todos los avisos e instrucciones marcadas en el CPU Switch Smart SUN-MAC-PC,

el adaptador de potencia opcional y todos sus accesorios.

Aviso – el adaptador de potencia opcional tiene piezas con tensión.

El adaptador de potencia opcional no contiene piezas que pueda mantener el usuario –

no desmontarlo.

Cambie el adaptador de potencia opcional solamente con un tipo aprobado por el

fabricante.

Si utiliza una cable de extensión con el CPU Switch Smart SUN-MAC-PC, compruebe

que el amperaje nominal total de los equipos enchufados en el cable de extensión no

superen el amperaje nominal del cable de extensión. Asimismo, compruebe que el

amperaje nominal total de todos los equipos conectados a la toma de red no superen el

amperaje nominal de la toma.

CPU Switch Smart SUN-MAC-PC

SPANISH

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide d'ins tallation rapide et mode d'emploi

INSTALLATION RAPIDE

Mettez tous vos ordinateurs hors tension et raccordez-les aux ports ORANGE à l'arrière

du CPU Switch Smart SUN-MAC-PC. Les câbles clavier/vidéo/souris LINDY 3-in-1 sont

recommandés pour des raisons pratiques.

Raccordez votre clavier, moniteur et souris au port GRIS à l'arrière du CPU Switch

Smart.

MODE D'EMPLOI SOMMAIRE

La configuration par défaut du CPU Switch Smart convient à la plupart des systèmes.

Pour sélectionner un ordinateur, utilisez la touche du panneau avant, une souris à trois

boutons ou une combinaison de touches de raccourci clavier. Pour sélectionner un

ordinateur à l'aide de la souris, maintenez la pression sur le bouton central et appuyez

sur le bouton gauche ou droite avant de relâcher. Pour sélectionner un ordinateur avec

les touches de raccourci clavier, maintenez les touches CTRL et ALT enfoncées,

appuyez sur la touche du port souhaité (ex. 1) et relâchez, puis relâchez les touches

CTRL et ALT.

Cons ignes de s écurité

A n'utiliser qu'à l'intérieur, dans un environnement sec et exempt d'huile.

Ne pas assurer soi-même l'entretien du CPU Switch Smart SUN-MAC-PC.

Observer tous les avertissements et instructions marqués sur le CPU Switch Smart SUN-MAC-

PC, son adaptateur de courant optionnel et ses accessoires.

Avertissement – l'adaptateur de courant optionnel renferme des pièces sous tension.

L'adaptateur de courant optionnel ne contient aucune pièce devant être révisée par l'utilisateur –

ne pas le démonter.

Ne remplacer l'adaptateur de courant optionnel que par un adaptateur approuvé par le fabricant.

Lorsqu'une rallonge est utilisée pour le CPU Switch Smart SUN-MAC-PC, vérifier que l'intensité

nominale totale des périphériques branchés sur la rallonge ne dépasse pas l'intensité nominale du

câble. Par ailleurs, vérifier que l'intensité nominale totale de tous les périphériques branchés sur la

prise murale ne dépasse pas l'intensité nominale de la prise murale elle-même.

CPU Switch Smart SUN-MAC-PC

FRENCH

Download from Www.Somanuals.com. All Manuals Search And Download.

Guida di ins tallazione rapida e funzionamento

INSTALLAZIONE RAPIDA

Spegnere tutti i computer e collegarli alle porte ARANCIONI sul retro dell’CPU

Switch Smart SUN-MAC-PC. Per facilità consigliamo i cavi LINDY combinati 3-in-

1 tastiera/video/mouse.

Collegare la tastiera, monitor e mouse alla porta GRIGIA sul retro dell’CPU

Switch Smart.

SOMMARIO GUIDA OPERATIVA

La configurazione di default dell’CPU Switch Smart è adatta alla maggior parte

dei sistemi.

Si può selezionare un computer usando il tasto sul pannello frontale, un mouse a

tre bottoni o una tastiera con tasti attivi. Per selezionare un computer con il

mouse, premere e rilasciare i bottoni sinistro o destro trattenendo

contemporaneamente quello centrale. Per selezionare un computer con tasti attivi

tastiera, tener premuti i tasti CTRL e ALT, premere e rilasciare il tasto porta

richiesta (es. 1) e quindi rilasciare i tasti CTRL e ALT.

Informazionoi riguardanti la s icurezza

Da usare esclusivamente in interni asciutti e privi di olio.

Non cercare di effettuare manutenzione sull’CPU Switch Smart SUN-MAC-PC.

Seguire tutti gli avvertimenti ed istruzioni presenti sull’CPU Switch Smart SUN-MAC-PC,

sull’adattatore opzionale di potenza e sugli accessori.

Attenzione – l’adattatore opzionale di potenza contiene parti sotto tensione.

L’adattatore opzionale di potenza non contiene parti soggette a manutenzione da parte dell’utente

– non smontarlo.

Sostituire l’adattatore opzionale di potenza solo con uno di tipo approvato dal produttore.

Se si usa una prolunga con l’CPU Switch Smart SUN-MAC-PC, controllare che la potenza

nominale totale in ampère dei dispositivi collegati alla prolunga non superi la potenza nominale in

ampère della prolunga stessa. Controllare inoltre che la potenza nominale totale in ampère dei

dispositivi collegati non superi la potenza nominale in ampère della presa a muro.

CPU Switch Smart SUN-MAC-PC

Download from Www.Somanuals.com. All Manuals Search And Download.

About this manual

CPU Switch Smart SUN-MAC-PC - Installation and Use

First edition (January 2002)

www.LINDY.com

Part No. 32251

manual, LINDY assumes no responsibility for errors or omissions. Neither is any

liability assumed for damages resulting from the use of the information contained

herein. We reserve the right to change the specifications, functions and circuitry of

the product without notice. All trademarks acknowledged.

Safety information

For use in dry, oil free indoor environments only.

Do not attempt to service the CPU Switch Smart SUN-MAC-PC yourself.

Follow all warnings and instructions marked on the CPU Switch Smart SUN-

MAC-PC, its optional power adapter and its accessories.

Warning - live parts contained within optional power adapter.

No user serviceable parts within optional power adapter - do not dismantle.

Replace the optional power adapter with a manufacturer approved type only.

If you use a power extension cord with the CPU Switch Smart SUN-MAC-PC,

make sure the total ampere rating of the devices plugged into the extension cord

does not exceed the cord’s ampere rating. Also, make sure that the total ampere

rating of all the devices plugged into the wall outlet does not exceed the wall

outlet’s ampere rating.

CPU Switch Smart SUN-MAC-PC Ins tallation and Us e

Page 1

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

LINDY warrants that this product shall be free from defects in workmanship and

materials for a period of three years from the date of original purchase. If the product

should fail to operate correctly in normal use during the warranty period, LINDY will

replace or repair it free of charge. No liability can be accepted for damage due to

misuse or circumstances outside LINDY’s control. Also LINDY will not be

responsible for any loss, damage or injury arising directly or indirectly from the use

of this product. LINDY’s total liability under the terms of this warranty shall in all

circumstances be limited to the replacement value of this product.

If any difficulty is experienced in the installation or use of this product that you are

unable to resolve, please contact your supplier.

Trademarks

All trademarks mentioned in this manual are acknowledged to be the property of the

respective trademark owners.

Compaq is a registered trademark of Compaq Computer Corporation.

Hewlett-Packard is a registered trademark of Hewlett-Packard.

IBM, PC/AT, PS/2, RS/6000 and ThinkPad are registered trademarks of

International Business Machines Corporation.

Logitech, MouseMan+ and Pilot Mouse+ are trademarks of Logitech Inc.

Microsoft and Windows are registered trademarks, and IntelliMouse is a trademark

of Microsoft Corporation.

Velcro is a trademark of Velcro USA Inc.

CPU Switch Smart SUN-MAC-PC Ins tallation and Us e

Page 2

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Frequency Energy

Shielded cables must be used with this equipment to maintain compliance with radio

frequency energy emission regulations and ensure a suitably high level of immunity

to electromagnetic disturbances.

European EMC directive 89/336/EEC

FCC Compliance Statement (United States )

This equipment generates, uses and can radiate

radio frequency energy and if not installed and

used properly, that is, in strict accordance with

the manufacturer’s instructions, may cause

interference to radio communication. It has been

tested and found to comply with the limits for a

class A computing device in accordance with the

specifications in Subpart J of part 15 of FCC

rules, which are designed to provide reasonable

protection against such interference when the

equipment is operated in a commercial

environment. Operation of this equipment in a

residential area may cause interference, in

which case the user at his own expense will be

required to take whatever measures may be

necessary to correct the interference. Changes

or modifications not expressly approved by the

manufacturer could void the user’s authority to

operate the equipment.

This equipment has been tested and found to

comply with the limits for a class A computing

device in accordance with the specifications in

the European standard EN55022. These limits

are designed to provide reasonable protection

against harmful interference. This equipment

generates, uses and can radiate radio frequency

energy and if not installed and used in

accordance with the instructions may cause

harmful interference to radio or television

reception. However, there is no guarantee that

harmful interference will not occur in a particular

installation. If this equipment does cause

interference to radio or television reception,

which can be determined by turning the

equipment on and off, the user is encouraged to

correct the interference with one or more of the

following measures: (a) Reorient or relocate the

receiving antenna. (b) Increase the separation

between the equipment and the receiver. (c)

Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected. (d) Consult the supplier or an

experienced radio / TV technician for help.

Canadian Department of Communications

RFI s tatement

This equipment does not exceed the class A

limits for radio noise emissions from digital

apparatus set out in the radio interference

regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de

bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la

classe A prescrites dans le règlement sur le

brouillage radioélectriques publié par le

ministère des Communications du Canada.

CPU Switch Smart SUN-MAC-PC Ins tallation and Us e

Page 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

1. Introduction ..................................................................................... 6

1.1 Key features............................................................................................6

1.2 Package contents ...................................................................................8

1.3 Remote controller contents .....................................................................8

1.4 Product information ................................................................................9

2. Ins tallation ....................................................................................... 11

2.1 What you will need .................................................................................11

2.2 Mounting the CPU Switch Smart SUN-MAC-PC ....................................13

2.3 Connecting your devices .......................................................................13

2.4 ‘Interface powered' operation without the optional power adapter ........16

2.5 Configuring your PCs .............................................................................16

2.6 Configuring the CPU Switch Smart SUN-MAC-PC ................................16

2.7 Summary of CPU Switch Smart SUN-MAC-PC configuration options ....18

2.8 Resetting the CPU Switch Smart SUN-MAC-PC without

disconnecting your devices...........................................................................20

2.9 Other useful installation information ......................................................20

2.10 Re-enabling a disconnected PS/2 mouse ............................................21

2.11 Hot plugging the CPU Switch Smart SUN-MAC-PC into running

systems and re-enabling disconnected PS/2 CPU mouse connections ......21

2.12 Upgrading the CPU Switch Smart's flash memory ..............................23

3. Us ing the CPU Switch Smart SUN-MAC-PC ............................... 28

3.1 Power on status ......................................................................................28

3.2 Front panel keys and remote controller ..................................................28

3.3 Status display .........................................................................................29

3.4 Keyboard hotkey control.........................................................................30

3.5 Mouse control .........................................................................................31

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 4

Download from Www.Somanuals.com. All Manuals Search And Download.

4. CPU Switch Smart SUN-MAC-PC configuration options ............ 32

4.1 Screen saver time delay ........................................................................32

4.2 Autoscan lock on mode and delay time .................................................32

4.3 Mouse mode and mouse switching of channels .....................................33

4.4 Keyboard hotkey combination ...............................................................35

4.5 Cycling between all channels or just the active channels ......................35

4.6 Firmware functions (version query, mouse restore and reset) ..............35

4.7 Setting a security password ...................................................................36

4.8 Cascade query code ..............................................................................37

4.9 Resolving slow mouse problems ...........................................................37

4.10 Sun keyboard type ...............................................................................38

4.11 Using the Sun keyboard's "hot media" keys to select computers ........38

4.12 Customising the Sun keyboard operation to force the

generation of a £ ...................................................................................38

4.13 Exit configure mode .............................................................................39

Appendices

A - Cable and connector specifications .................................................................40

B - Problem solving ...............................................................................................46

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 5

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Introduction

Thank you for purchasing the CPU Switch Smart SUN-MAC-PC. Your CPU Switch

Smart SUN-MAC-PC is a very high performance multi-platform keyboard, monitor

and mouse sharing device which supports a wide range of computer hardware and

software platforms. Stereo speaker and microphone connections add further to the

CPU Switch Smart's versatility by enabling you to control several multimedia

computers from a single console. Your CPU Switch Smart intelligently handles the

conversions between various hardware standards so that you can use a single

keyboard and mouse of your choice to control a diverse mixture of computers. A

range of useful features and functions have been provided to enhance the ease of

use of this product and we trust that you will enjoy using it.

1.1 Key features

Control multiple computers from a single console (keyboard, mouse, monitor,

stereo speakers and microphone).

Connects to computers with Sun (8-pin) or PC (6-pin) style keyboard and mouse

connections.

SPU models also connect to computers with USB keyboard and mouse

connections.

All models support Sun or PC style keyboards and mice.

Automatic "seamless" conversion between different hardware platforms.

Channel switching by front panel key, keyboard hotkey, 3 button mouse or Sun

keyboard "hot media" keys.

"All-in-one" colour coded cables provide a very neat installation with excellent

video quality.

Supports a very wide range of software including Windows 3.X, WFWG, 95, 98,

2000, ME, XP, NT, DOS, Unix, Linux^®, Novell^®NetWare^®, OS/2, BSD, Solaris,

Mac OS (8.6 and higher).

Automatic detection of the connected hardware.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 6

Download from Www.Somanuals.com. All Manuals Search And Download.

Continuous keyboard and mouse emulation on all ports ensures problem free

computer bootup.

On SPU models, continuous USB device emulation ensures reliable and quick

switching without having to wait several seconds for the USB bus to enumerate.

Interface powered operation – CPU Switch Smart SUN-MAC-PC draws its power

from the connected computers for maximum convenience.

Intelligent switching feature enables users to switch between all ports or just the

active ports.

Stereo audio and microphone support makes MP ideal for multimedia

applications.

"Clickless" audio switching ensures that the speakers don't "thump" every time

that you switch channels.

Supports high bandwidth monitors at resolutions up to 1900 x 1440 with an

excellent video transfer characteristic - high bandwidth and low distortion.

RS232 mice supported as standard.

Flash upgradeable - CPU Switch Smart SUN-MAC-PC's firmware may be

upgraded by connecting a computer's serial port and running a download

program.

Video channels support Display Data Channel (DDC/DDC1/DDC2) signalling.

Password security prevents unauthorised use.

User options stored in EEPROM memory.

Remote control module for convenient operation.

Sun keyboard remap feature to force generation of £ key.

Automatically restores keyboard and mouse states when channel changed.

Supports mouse prompt and stream modes for maximum compatibility.

Includes screen saver, auto-scan and variable hotkey options.

Supports Microsoft IntelliMouse and other common wheel mice.

Allows mixtures of controlling devices such as a Sun keyboard with a PC style

PS/2 mouse.

Mouse restoration functions to enable ‘hot plugging’ of certain systems.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Keyboard, mouse and CPU Switch Smart SUN-MAC-PC resets may be performed

without disconnecting devices.

Supports IBM ThinkPad ‘Y’ cables.

Power and activity indication confirm correct operation.

All ports are active simultaneously – all computers may all be booted at the same

time.

Keyboard data flowing through the CPU Switch Smart is kept in its "native" format

which enables the additional keys on enhanced keyboards to be supported.

Robust metal case ensures good shielding and video quality.

All models support desktop and laptop PCs, Sun (8-pin style), RS6000s, DEC

Alphas, and Silicon Graphics.

SPU models additionally support Sun (USB style), desktop and laptop PCs (USB

style) and Apple (USB style).

Optional power adapter can be used for ‘video only’ or cascade applications.

1.2 Package contents

CPU Switch Smart SUN-MAC-PC.

This installation guide.

(Please note that a power adapter is NOT required for most applications and so is

not included. This may be purchased separately if required -

part code:32290 IEC Power Adaptor with UK Mains Lead

part code:32265 IEC Power Adaptor with US Mains Lead

part code:32263 IEC Power Adaptor with Schuko Mains Lead part

code:32274 Wall Mount Power Adaptor with Euro Plug)

1.3 Remote controller contents (part code: 32255)

Remote control module.

Velcro strip for mounting remote controller.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 8

Download from Www.Somanuals.com. All Manuals Search And Download.

1.4 Product information

Figure 1 - CPU Switch Smart SUN-MAC-PC front view

Figure 2 - CPU Switch Smart SUN-MAC-PC rear view

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 9

Download from Www.Somanuals.com. All Manuals Search And Download.

Figure 3 - Remote control pad / dis play (optional acces s ory)

Figure 4 - Rear view of CPU Switch Smart SUN-MAC-PC

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 10

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Ins tallation

2.1 What you will need

Cables to connect the CPU Switch Smart SUN-MAC-PC to each of your

computers. These cables are specially constructed for use with the CPU Switch

Smart SUN-MAC-PC and may be purchased from your CPU Switch Smart SUN-

MAC-PC supplier. Cable specifications and part codes are given in appendix A.

A suitable keyboard. Supported types are:

1) A Sun keyboard with an 8 pin mini-DIN connector (recommended if you are

going to connect any Sun computers to the MP).

2) A standard PC style keyboard with a 6 pin mini-DIN PS/2 style connector.

3) A standard PC style keyboard with a 5 pin DIN connector and an AT to PS/2

keyboard adapter (5 pin DIN to 6 pin mini-DIN)

A suitable mouse. If you wish to use the mouse to switch the CPU Switch Smart

SUN-MAC-PC's channel then you will need a three button mouse or an IntelliMouse.

Supported types are:

1) A standard PC style two or three button Microsoft or Logitech compatible

mouse or a Microsoft IntelliMouse compatible mouse with a 6-pin mini-DIN

connector.

2) A Sun mouse of the type that plugs into the Sun keyboard. This should have

an 8 pin mini-DIN connector.

A monitor with a standard VGA/SVGA (15 pin) connector that will work when

connected directly to each of your computers. CPU Switch Smart SUN-MAC-PC

supports low and high resolution monitors. If you have a monitor with a 13 pin 13W3

connector of the type that was traditionally used to connect to older Sun computers

then you will need an adapter to convert this to the 15 pin format - please contact

your CPU Switch Smart SUN-MAC-PC supplier.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 11

Download from Www.Somanuals.com. All Manuals Search And Download.

You may also need one or more of the following adapters. These adapters may

be obtained from your CPU Switch Smart SUN-MAC-PC supplier and other good

retailers.

Video adapter - 13W3 male connector to 15 pin D-type connector

(LINDY part code: 70127)

If you have a Sun computer with an older style 13W3 video connector then you

will need an adapter to convert this to the 15 way D-type format.

Keyboard adapter - 6 pin mini-DIN female to 5 pin s tandard DIN male

(LINDY part code: 70130)

If you have a PC with an older style 5 pin standard DIN connector then you will

need an adapter to convert this to the 6 pin mini-DIN format.

Mous e adapter - 9 pin D-type female to 6 pin mini-DIN female

(LINDY part code: 70058)

If you have a PC with an older style RS232 mouse connection then you will need

an adapter to convert this to the 6 pin mini-DIN format. There are several

specifications of these adapters that are provided with various mice. They all look

the same but unfortunately there are several common wiring schemes all of

which are different. To ensure that you have the right adapter, either purchase

this from your CPU Switch Smart SUN-MAC-PC supplier or check your adapter

against the wiring specification given in Appendix A.

If you are connecting to PCs then you will need a suitable mouse driver.

Supported types are:

1) A PS/2 or RS232 two button mouse driver (any manufacturer).

2) Microsoft mouse driver (including IntelliMouse).

3) Logitech mouse driver (including two button, three button and wheel mouse).

4) A mouse driver that is compatible with the above types (most are).

(The CPU Switch Smart SUN-MAC-PC supports ‘Internet Mice’ that are compatible

with the Microsoft IntelliMouse. These are fitted with a wheel or other scroll control

and sometimes have additional buttons. Examples are: Microsoft IntelliMouse,

Logitech Pilot Mouse+, Logitech MouseMan+, Genius NetMouse and Genius

NetMouse Pro.)

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 12

Download from Www.Somanuals.com. All Manuals Search And Download.

Us e of PS/2 and RS232 s tyle mice with the CPU Switch Smart SUN-MAC-PC -

All of the mouse connections from CPU Switch Smart SUN-MAC-PC to PCs support

either a PS/2 or an RS232 mouse. CPU Switch Smart SUN-MAC-PC automatically

converts from the PS/2 mouse commands to RS232 serial mouse commands. Serial

mice types are selected by using an adapter as described in Appendix A. The CPU

Switch Smart SUN-MAC-PC will operate without a mouse connected if you do not

wish to use one.

2.2 Mounting the CPU Switch Smart SUN-MAC-PC

The CPU Switch Smart SUN-MAC-PC has been designed for use on a desktop or

shelf in close proximity to the user’s monitor and peripherals. The optional remote

controller may be used if you wish to locate the CPU Switch Smart SUN-MAC-PC on

a desk or shelf that is some distance from the monitor and peripherals.

2.3 Connecting your devices

Ensure that the optional power adapter is disconnected from the CPU Switch Smart

SUN-MAC-PC and that all the devices which are to be attached are switched off.

Connect the shared keyboard, mouse, monitor, speakers and microphone to the

connectors at the rear of the CPU Switch Smart SUN-MAC-PC (see figs 1, 2 and 3).

If you are using a Sun keyboard with an 8 pin DIN connector then plug the keyboard

into the MP and the mouse into the keyboard. You may leave any unused ports

disconnected if you don't wish to use all these devices.

Next, connect each computer system unit in turn using the LINDY interface cables

that you have purchased for use with the CPU Switch Smart SUN-MAC-PC (see

Appendix A for cable specifications and part codes). These are colour coded and

should connect directly to the various ports on your computers. The three main

cable types are shown in figure 5. These cables are available with or without the

audio connectors. Any unused computer connections can be left unconnected.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Figure 5 - CPU Switch Smart SUN-MAC-PC cables.

See appendix A for part codes and ordering information

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 14

Download from Www.Somanuals.com. All Manuals Search And Download.

To connect PCs with serial mouse connections and AT style keyboard connections

use the PC cable together with the adapters specified in appendix A. If you have an

existing 6-pin mini-DIN to 9-pin serial adapter that came with a mouse it may not be

suitable for use with the CPU Switch Smart as there are several different standard

wiring configurations for these adapters.

To connect Sun computers with older style 13W3 video connections you will need to

use the Sun cable together with a 13W3 to 15 way D-type video adapter.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 15

Download from Www.Somanuals.com. All Manuals Search And Download.

The CPU Switch Smart SUN-MAC-PC is now ready for use and will start to operate

as soon as one of the attached PCs is powered on. If you are connecting to PCs

using cables that are longer than 5 metres or are cascading the CPU Switch Smart

SUN-MAC-PC to another CPU Switch Smart SUN-MAC-PC you will need to use the

optional power adapter. When using the optional power adapter, ensure that it is

connected to the mains and powering the CPU Switch Smart SUN-MAC-PC before

you switch on the connected computers. Failure to switch the CPU Switch Smart

SUN-MAC-PC and computers on in the correct order can lead to the mouse and/or

keyboard not being recognised by the computers when they are switched on.

2.4 ‘Interface powered’ operation without the optional power

adapter

The CPU Switch Smart SUN-MAC-PC draws its power from the connected

computers via the keyboard cables. A single keyboard connection is normally

sufficient to power the CPU Switch Smart SUN-MAC-PC provided that the cable is

no longer than 5 metres. If more than one computer is connected then the power will

be intelligently drawn from all computers. Cables longer than 5 metres may be used

provided that the CPU Switch Smart SUN-MAC-PC is already powered by another

connected computer or the optional power adapter. If you are cascading the CPU

Switch Smart SUN-MAC-PC to another CPU Switch Smart SUN-MAC-PC then a

power adapter must be connected to all CPU Switch Smart SUN-MAC-PCs.

2.5 Configuring your computers

Configure your computers in the same way that you would if your keyboard, mouse

and monitor were all connected directly to your computer. For PCs, the CPU Switch

Smart SUN-MAC-PC emulates Microsoft compatible serial, IntelliMouse, and PS/2

mice, so ensure that your PC software is configured for a Microsoft mouse of the

correct type. Refer to the list of supported drivers in section 2.1.

2.6 Configuring the CPU Switch Smart SUN-MAC-PC

The CPU Switch Smart SUN-MAC-PC is supplied pre-configured with factory

defaults which are suitable for most applications. There are a number of more

advanced options which can be set by the user. These are stored in the CPU Switch

Smart SUN-MAC-PC's EEPROM memory and are retained when the power is

disconnected.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 16

Download from Www.Somanuals.com. All Manuals Search And Download.

The options may be changed whilst the CPU Switch Smart SUN-MAC-PC is in

configure mode. You may enter configure mode at initial power on or whilst the CPU

Switch Smart SUN-MAC-PC is running:

To enter configure mode at power on:

Switch off all the attached computers and the CPU Switch Smart SUN-MAC-PC.

Hold down the front panel key whilst powering on the CPU Switch Smart SUN-MAC-

PC. Remember that the CPU Switch Smart SUN-MAC-PC draws its power from any

attached PC via the keyboard cable and so will power itself on when the attached

PC is switched on or when the optional power adapter is connected. Do not release

the key until the CPU Switch Smart SUN-MAC-PC displays 'u'. Whilst the CPU

Switch Smart is displaying 'u', press and hold down the front panel key for 5

seconds until the CPU Switch Smart SUN-MAC-PC displays 'C' to show that it has

entered configure mode.

If you wish you may use the reset switch that is situated on the underside of the

CPU Switch Smart SUN-MAC-PC (see figure 4) to perform a power-on reset without

powering down the connected computers.

To enter configure mode whils t the CPU Switch Smart SUN-MAC-PC is

running:

Hold down the front panel key for 5 seconds until the front panel display shows ‘C’.

In configure mode, options are entered by typing a letter followed by a number

followed by (return). Use ESC to abort the entry of an option. The CPU Switch Smart

SUN-MAC-PC will remain in configure mode until you type 'E' (return).

For example: to set hotkey option 2 type the following at the 'C' prompt

(at CPU Switch Smart SUN-MAC-PC 'C' prompt)

To exit configure mode type:

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 17

Download from Www.Somanuals.com. All Manuals Search And Download.

2.7 Summary of CPU Switch Smart SUN-MAC-PC configuration

options

Full details of each of the configuration options and their uses are given in section 4.

B1 - screen saver disabled (default)

B2 - Blank screen after 1 minute of inactivity

B3 - Blank screen after 2 minutes of inactivity

B4 - Blank screen after 4 minutes of inactivity

B5 - Blank screen after 8 minutes of inactivity

B6 - Blank screen after 12 minutes of inactivity

B7 - Blank screen after 16 minutes of inactivity

B8 - Blank screen after 20 minutes of inactivity

D1 - Sun default keyboard type = UK (default setting)

D2 - Sun default keyboard type = UNIX / US

S1 - Enable "hot media" keys (default)

S2 - Disable "hot media" keys

S3 - Enable shift-3 remap

S4 - Disable shift-3 remap (default)

(Shift-3 remap inserts key sequence

[compos e] L -)

L1 - CPU Switch Smart SUN-MAC-PC locks on to active ports only during

autoscanning (default)

L2 - CPU Switch Smart SUN-MAC-PC locks on to every port during autoscanning

L3 - CPU Switch Smart SUN-MAC-PC powers on in autoscan mode and locks on to

active ports only

L4 - CPU Switch Smart SUN-MAC-PC powers on in autoscan mode and locks on to

all ports

L7 - Cascade query code = AD (default)

L8 - Cascade query code = EF

T1 - 2 seconds autoscan delay time before switching to next port (default)

T2 - 5 seconds autoscan delay time before switching to next port

T3 - 7 seconds autoscan delay time before switching to next port

T4 - 10 seconds autoscan delay time before switching to next port

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 18

Download from Www.Somanuals.com. All Manuals Search And Download.

T5 - 15 seconds autoscan delay time before switching to next port

T6 - 20 seconds autoscan delay time before switching to next port

T7 - 30 seconds autoscan delay time before switching to next port

T8 - 60 seconds autoscan delay time before switching to next port

U1 - CPU Switch Smart SUN-MAC-PC channels are switchable using a 3 button

mouse or IntelliMouse (default)

(CPU Switch Smart SUN-MAC-PC reports 2 button mouse mode to PCs)

U2 - CPU Switch Smart SUN-MAC-PC channels are not switchable using 3 button

mouse or IntelliMouse

(CPU Switch Smart SUN-MAC-PC reports 2 button mouse mode to PCs)

U3 - CPU Switch Smart SUN-MAC-PC channels are not switchable using 3

mouse or IntelliMouse

(CPU Switch Smart SUN-MAC-PC reports 3 button mouse mode to PCs)

U4 - CPU Switch Smart SUN-MAC-PC channels are switchable using 3 button

mouse or IntelliMouse

(CPU Switch Smart SUN-MAC-PC reports IntelliMouse mode to PCs)

U5 - CPU Switch Smart SUN-MAC-PC channels are not switchable using 3 button

mouse or IntelliMouse

(CPU Switch Smart SUN-MAC-PC reports IntelliMouse mode to PCs)

U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button

mouse (default)

U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three

button mouse

H1 - Hotkey combination is CTRL + ALT + command key (default)

H2 - Hotkey combination is CTRL + SHIFT + command key

H3 - Hotkey combination is ALT + SHIFT + command key

H4 - Hotkey combination is RIGHT ALT + command key

H5 - Hotkey combination is LEFT ALT + RIGHT ALT + command key

H6 - Hotkey combination is LEFT CTRL + LEFT ALT + command key

H7 - Hotkey combination is RIGHT CTRL + RIGHT ALT + command key

H8 - No hotkey combination enabled

F1 - Display firmware first digit (Note: F1 is Ffollowed by 1NOT l)

F2 - Display firmware second digit

F3 - Display firmware third digit

F5 - Restore PS/2 mouse function

F6 - Restore IntelliMouse function

F8 - RESET all configurations to default settings. (Display confirms with 'r').

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 19

Download from Www.Somanuals.com. All Manuals Search And Download.

P - Sets password - see section 4.6 for instructions.

E - Exits configure mode and returns the CPU Switch Smart SUN-MAC-PC to

normal operation mode.

2.8 Res etting the CPU Switch Smart SUN-MAC-PC without

dis connecting your devices

The CPU Switch Smart SUN-MAC-PC draws its power from the connected

computers and therefore may only be fully powered down when all the connected

computers have been switched off or disconnected. However, the CPU Switch

Smart SUN-MAC-PC may be reset without disconnecting or powering down your

computers by using the reset switch on the underside of the unit. Performing a reset

using this switch performs a complete hardware reset on the CPU Switch Smart

SUN-MAC-PC and is equivalent to switching off the power. To perform a hardware

reset, insert a small blunt object, such as the ball of a pen, into the small hole on the

base of the CPU Switch Smart.

2.9 Other us eful ins tallation information

PC boot up s equence - When your PCs are powered on they communicate with

any attached keyboards and mice and setup parameters required by the particular

operating system. It is necessary for the CPU Switch Smart SUN-MAC-PC to be

attached and powered on during this sequence so that it can give the required

responses and keep track of all the modes and settings requested by each of the

connected PCs.

Mous e characteris tics - do not unplug a PS/2 mouse connection from a PC whilst

the PC is on. Due to the design of PS/2 mice communications the mouse function on

the PC will be lost and you will have to re-boot the PC to regain normal operation.

Unplugging the mouse from the CPU Switch Smart SUN-MAC-PC will also cause it

to stop operating when it is plugged back in. RS232 mice can usually be unplugged

and plugged back in provided that a mouse was connected when the operating

system initially booted. The CPU Switch Smart SUN-MAC-PC is fitted with a PS/2

mouse recovery system which allows you to disconnect and re-connect the shared

mouse without powering down the system (although this is generally not advisable) -

see section 2.10 for details.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 20

Download from Www.Somanuals.com. All Manuals Search And Download.

Keyboard and mous e mode s witching - The CPU Switch Smart SUN-MAC-PC

keeps a log of the keyboard and mouse mode and resolution settings requested by

each of the connected computers. These settings are automatically restored to the

shared keyboard and mouse when the CPU Switch Smart SUN-MAC-PC channel is

switched thus ensuring maximum software compatibility. The keyboard num, caps

and scroll lock states are an obvious example of this process.

2.10 Re-enabling a dis connected PS/2 mous e

If you disconnect the shared PS/2 mouse from the CPU Switch Smart SUN-MAC-PC

by accident during operation then the mouse operation will be lost when the mouse

is plugged back in. To avoid having to reboot the entire system in this situation the

CPU Switch Smart SUN-MAC-PC is fitted with an automatic mouse recovery

system.

With the PS/2 mouse disconnected, change the channel using the keypad or

keyboard hotkeys. The CPU Switch Smart SUN-MAC-PC detects that the mouse

has been disconnected and triggers the automatic recovery system. Plug in the PS/2

mouse and the CPU Switch Smart SUN-MAC-PC will re-initialise it.

2.11 Hot plugging the CPU Switch Smart SUN-MAC-PC into running

s ys tems and re-enabling dis connected CPU PS/2 mous e

connections

It is advisable to switch off the systems that are going to be connected to the CPU

Switch Smart SUN-MAC-PC before installation. However, if this is not possible then

most systems can be hot plugged by using the CPU Switch Smart SUN-MAC-PC’s

mouse restoration functions. The keyboard connection will normally restore itself

automatically.

On many PCs, mouse movement will be lost if the PS/2 mouse is unplugged and

plugged back in whilst the PC is running. Mouse movement can then only be

restored by rebooting the PC. This is because the mouse drivers only setup and

enable the mouse when the PC is initially booted.

If you have switched off your CPU Switch Smart SUN-MAC-PC or you are

attempting to ‘hot plug’ it into a system that is already running, you may be able to

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 21

Download from Www.Somanuals.com. All Manuals Search And Download.

restore lost mouse movement using the CPU Switch Smart SUN-MAC-PC's mouse

restoration functions.

Mous e res toration functions s hould be us ed with care as unpredictable

res ults may occur if the wrong mous e type is s elected. If in doubt res tore the

mous e by powering down the PC normally.

Standard PS/2 mouse data uses a different data format to IntelliMouse data and so

two reset functions are provided on the CPU Switch Smart SUN-MAC-PC. The type

of data format expected by the PC depends upon the driver and the type of mouse

that was connected when the driver was booted. The following table may be used as

a guide.

Note that the mouse reset functions predict the likely mouse resolution settings but

may not restore the speed or sensitivity of the mouse exactly as they were when the

PC originally booted.

Type of mous e / s ys tem

Connected at bootup

Driver type Likely expected

data format

Sugges ted

res toration

PS/2

PS/2 only

PS/2

IntelliMouse

PS/2

IntelliMouse / CPU Switch Smart PS/2 only

IntelliMouse / CPU Switch Smart IntelliMouse

PS/2

IntelliMouse

To restore lost mouse movement on a CPU connected to the CPU Switch Smart

SUN-MAC-PC:

1) Select the CPU that has lost its mouse movement

2) Press the select key on the front of the CPU Switch Smart SUN-MAC-PC for 5

seconds until ‘C’ is displayed. You are now in configure mode.

3) To restore a PS/2 mouse connection press

F 5

Or, to restore an IntelliMouse connection press

F 6

4) Exit from configure mode by typing

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 22

Download from Www.Somanuals.com. All Manuals Search And Download.

5) Test the mouse movement by moving the mouse a short distance.

F5 - Restore PS/2 mouse function

F6 - Restore IntelliMouse function

2.12 Upgrading the CPU Switch Smart's flas h memory

The CPU Switch Smart SUN-MAC-PC uses flash memory technology which enables

the firmware code to be upgraded by the user. Upgrades are performed by

connecting a PC's serial port to the CPU Switch Smart's options port and running an

upgrade program on the PC. This upgrade program downloads the new firmware to

the CPU Switch Smart and checks that the data has been programmed correctly.

To perform a firmware upgrade on your CPU Switch Smart SUN-MAC-PC you will

need a suitable serial upgrade cable and an IBM PC compatible computer with an

RS232 serial port and an operating system that supports DOS. Upgrade cables may

be purchased from LINDY Electronics or may be made using the wiring specification

given in Appendix A4. You will also need to download the latest version of the CPU

Switch Smart SUN-MAC-PC firmware which is available free of charge at

www.LINDY.com.

To perform a flash upgrade on the CPU Switch Smart SUN-MAC-PC:

Step 1 - Connect your computer to the CPU Switch Smart

Connect your computer's serial port to the CPU Switch Smart SUN-MAC-PC's

options port (labelled OPTIONS/FLASH).

Step 2 - Res et the CPU Switch Smart SUN-MAC-PC whils t holding down the

front panel key

The CPU Switch Smart SUN-MAC-PC may be reset by powering it off and then on

again. Remember that the CPU Switch Smart SUN-MAC-PC draws its power from

any of the connected computers so you will need to power down or disconnect all

the computers to power down the CPU Switch Smart. Alternatively you may reset

the CPU Switch Smart by inserting a small blunt object, such as the nib of a ball

point pen, into the small hole located on the underside of the CPU Switch Smart

(see figure 4). Hold down the front panel key BEFORE the CPU Switch Smart is

reset and keep it held down until the CPU Switch Smart has powered on and

displays 'u'.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3 - Ens ure that the CPU Switch Smart SUN-MAC-PC is powered on and

dis plays 'u'

Ensure that the CPU Switch Smart is powered on. It is normally possible to upgrade

the CPU Switch Smart when it is powered from a single computer. The upgrade

program monitors the CPU Switch Smart's voltage and will not allow an upgrade to

be performed if the voltage is insufficient.

The display should now show:

Step 4 - Run the upgrade program

The latest version of the CPU Switch Smart SUN-MAC-PC firmware is available

from the LINDY Technology website at www.LINDY.com. The upgrade files will be

supplied to you as a group and consist of several files as explained below. These

files should be downloaded to the same directory on your computer.

1) A universal upgrade program

AVMP.EXE

2) Binary code files for each of the processors within the CPU Switch (up to 3)

e.g.

MP129M.HEX

MP129S.HEX

MP129U.S19

These files use the following naming scheme. The first two characters are the

product type (e.g. MP = CPU Switch Smart SUN-MAC-PC). The next three

characters represent the firmware release version (e.g. 129 equals version 1.29).

The last character is designation that tells the upgrade program where to load the

file within the MP.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 24

Download from Www.Somanuals.com. All Manuals Search And Download.

3) A data file that tells the upgrade program (AVMP.EXE) which binary code files to

download to the CPU Switch Smart SUN-MAC-PC and where to put each file.

Theoretically this DAT file can be modified so that only certain processors are

upgraded but do not do this unless specifically instructed by LINDY technical

support.

e.g.

MP129SPU.DAT

Like the code files, the first two digits represent the product type (e.g. MP is CPU

Switch Smart SUN-MAC-PC). The next three digits represent the version number

(e.g. 129 equals firmware version 1.29). The last three digits are the model number

(e.g. SPU is the CPU Switch Smart SUN-MAC-PC supporting Sun, PC and USB

protocols).

To upgrade the CPU Switch Smart SUN-MAC-PC, check that the DAT file

designation matches the model that you have. In other words, if you have an CPU

Switch Smart SUN-MAC-PC and you want to upgrade to version 1.30 then the DAT

file that you need would be named MP130SPU.DAT. Also check that all the required

files are loaded into the same directory on your computer. From that directory run

the upgrade file using the following command line.

AVMP {Dat_file_name}.DAT

Where {Dat_file_name} is the name of the required DAT file

For example, if the name of the required DAT file is MP129SPU.DAT then use the

following command line:

AVMP MP129SPU.DAT

For your convenience the upgrade files will include a batch file that contains the

command shown above. To run the upgrade using the batch file, type the name of

the batch file e.g.

MP129SPU

Follow the instructions given on the screen to perform the upgrade. When the

upgrade is complete the program will confirm that the upgrade has been successful

and then quit.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 25

Download from Www.Somanuals.com. All Manuals Search And Download.

During the upgrade the display will show an upper case U and the dot will flash to

show that the upgrade is in progress.

Step 5 - Complete the upgrade proces s

When the upgrade program reports that the upgrade process is complete, reset the

CPU Switch Smart SUN-MAC-PC to start normal operation. This may be done by

powering off the CPU Switch Smart SUN-MAC-PC or by using the reset switch

located on the underside of the CPU Switch Smart.

Some us eful is s ues to bear in mind when performing flas h upgrades

The upgrade program rewrites the CPU Switch Smart's firmware code. If the

upgrade process is interrupted then the CPU Switch Smart will have invalid code

and will not be able to operate. It is therefore good practice to ensure that the

upgrade process is always fully completed. A partial or failed upgrade may be

rectified by performing another upgrade. If the upgrade process is interrupted

accidentally then you should immediately repeat the upgrade process. Running

faulty or partially upgraded code may have unpredictable results and may damage

your CPU Switch Smart SUN-MAC-PC or computing equipment. For obvious

reasons, the code that the CPU Switch Smart SUN-MAC-PC uses to perform

upgrades is not itself upgradeable - a common problem on some flash upgradeable

products that could effectively be destroyed by a partial upgrade!

WARNING - Running faulty or partially upgraded code may have unpredictable

res ults and may damage your CPU Switch Smart or computing equipment.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 26

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT NOTE

The upgrade programs are DOS bas ed to enable compatibility with the wides t

range of operating s ys tems . They run efficiently on DOS, Windows 3.X,

Workgroups , 95, 98, ME and Windows NT. The upgrades will take

approximately 10 minutes but vary s lightly according to the SmartView model

and the s peed of the PC. Upgrades run from PCs us ing Windows 2000 will

take very s ubs tantially longer due to the way that this operating s ys tem

handles the DOS programs . The upgrade will be reliable but may take around

3 hours to complete!

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 27

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Us ing the CPU Switch Smart SUN-MAC-PC

This section explains the general operation of the CPU Switch Smart SUN-MAC-PC.

We recommend that you read this section before starting to use the product.

3.1 Power on s tatus

At power on the CPU Switch Smart SUN-MAC-PC selects computer 1 and displays

'1'. If a password has been set then ‘P’ will be displayed and the CPU Switch Smart

SUN-MAC-PC will remain locked until a valid password is entered.

3.2 Front panel key and remote controller

The front panel key is used to select which channel is currently controlled by the

shared keyboard, mouse and monitor ports. Pressing the key during normal

operation will cause the next channel to be selected.

The key can also be used to access the CPU Switch Smart SUN-MAC-PC’s

configuration mode (see section 2.6). To do this press the key and hold it down for 5

seconds until ‘C’ appears on the CPU Switch Smart SUN-MAC-PC’s front panel

display.

An optional remote controller is also available which replicates the front panel key

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 28

Download from Www.Somanuals.com. All Manuals Search And Download.

and display, but can be located remotely from the CPU Switch Smart SUN-MAC-PC.

This is particularly useful in applications where the CPU Switch Smart SUN-MAC-PC

is located away from the desktop. The remote controller can be conveniently

attached to your keyboard with a couple of Velcro strips to give instant channel

information and key control.

3.3 Status dis play

The status display usually shows the currently selected port. If autoscan mode is

selected, the segments will illuminate in sequence in a clockwise direction

interspersed with a display of the currently selected channel. If CPU Switch Smart

SUN-MAC-PC has been locked, ‘P’ will be displayed until a valid password has been

typed to unlock the unit. Data flow from the mouse or keyboard causes the dot to

flash.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 29

Download from Www.Somanuals.com. All Manuals Search And Download.

3.4 Keyboard hotkey control

CPU Switch Smart SUN-MAC-PC can be conveniently controlled by selecting

channel, autoscan mode or security locking from the keyboard. All of the hotkey

control commands are invoked by holding down the two hotkeys and then pressing a

command key. By default, the two hotkeys are ‘CTRL’ and ‘ALT’, although other

combinations can be selected by reconfiguring the hotkeys (see section 4.4). Once

the hotkey command has been activated you will need to release the hotkeys and

the command key before a new hotkey command is accepted by the CPU Switch

Smart SUN-MAC-PC. HOTKEYs + TAB is an exception and this allows you to 'tab

through' the ports by holding down the hotkeys and repeatedly pressing TAB.

The hotkey command are summarised below (note that the numbers on the numeric

keypad do not form part of a valid hotkey) :

‘HOTKEYs ’ and ‘1’ - selects channel 1

‘HOTKEYs ’ and ‘2’ - selects channel 2

‘HOTKEYs ’ and ‘3’ - selects channel 3

‘HOTKEYs ’ and ‘4’ - selects channel 4

‘HOTKEYs ’ and ‘TAB’ - selects the next channel

‘HOTKEYs ’ and ‘A’ - selects autoscan mode where each channel is displayed for

the selected time (see section 4.2). To cancel autoscan mode simply select any

fixed channel either by hotkey or using the CPU Switch Smart SUN-MAC-PC button.

‘HOTKEYs ’ and ‘0’ – switches off the video signal and displays 0. This will cause

some monitors to go into standby mode or switch off. The video signal can be re-

enabled by selecting a channel.

‘HOTKEYs ’ and ‘L’ - disables the CPU Switch Smart SUN-MAC-PC's keyboard and

mouse and displays 0. The video signal is switched off. If a password has not been

set then the CPU Switch Smart SUN-MAC-PC can be re-enabled by selecting a

channel. If a password has been set then the CPU Switch Smart SUN-MAC-PC

displays 'P' to indicate that a valid password must be entered to unlock the switch.

Simply type the same key combination as was set during configuration (see section

4.7) followed by the (return) key. Note - if anyone has typed at the keyboard whilst in

secure mode, it will be necessary to type (return) first to clear the invalid password,

then type the valid password followed by (return) again.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 30

Download from Www.Somanuals.com. All Manuals Search And Download.

Examples of common hotkey sequences (assuming CTRL + ALT hotkey option):

To s elect channel 2:

_pressba2_release2ba

To 'tab through' channels :

_pressbav_releasev_pressv

_releasev_pressv_releasevba

3.5 Mous e control

Computers may conveniently be selected using a three button mouse. In order to

switch to the next computer simply hold down the central mouse button (the wheel

mouse button on an IntelliMouse) and click on the left hand mouse button to select

the next computer or the right hand mouse button to select the previous computer. If

the CPU Switch Smart has been set to scan active ports then the next or previous

active channel will be selected. If it has been set to scan all ports then the next or

previous numerical channel in sequence will be selected (see section 4.5 for more

details). Mouse switching may be enabled or disabled by setting options during

configuration (see section 4.3). When mouse switching is disabled the third button or

wheel button state is ‘passed through’ the CPU Switch Smart and seen by the

application software.

Hold down centre button (

Press and release left hand button

) to select next computer

)

Hold down centre button (

Press and release right hand button

( ) to select previous computer

)

(

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 31

Download from Www.Somanuals.com. All Manuals Search And Download.

4. CPU Switch Smart SUN-MAC-PC

configuration options

All the options described in this section are entered in CPU Switch Smart SUN-

MAC-PC configure mode - see section 2.6 for instructions on entering configure

mode.

4.1 Screen s aver time delay

CPU Switch Smart SUN-MAC-PC contains a programmable screen saver which will

blank the display after the set time delay with no keyboard or mouse activity. Simply

typing at the keyboard or moving the mouse will re-enable the display. The display

will flash whilst the CPU Switch Smart SUN-MAC-PC is in screen save mode.

B1 - screen saver disabled (default)

B2 - Blank screen after 1 minute of inactivity

B3 - Blank screen after 2 minutes of inactivity

B4 - Blank screen after 4 minutes of inactivity

B5 - Blank screen after 8 minutes of inactivity

B6 - Blank screen after 12 minutes of inactivity

B7 - Blank screen after 16 minutes of inactivity

B8 - Blank screen after 20 minutes of inactivity

4.2 Autos can ‘lock on’ mode and delay time

CPU Switch Smart SUN-MAC-PC can be set to select each channel in turn for a

period of time set by the autoscan delay time. Autoscan mode is entered by typing

the hotkey keys together with ‘A’. By default, only those channels which have a

powered up computer connected to them will be scanned. Sometimes it may be

desirable to scan all channels, even if the attached computer is switched off (this will

simply show a blank screen when it is selected). All the CPU Switch Smart SUN-

MAC-PC’s ports will be scanned if option L2 is selected. Some applications may also

require the CPU Switch Smart SUN-MAC-PC to power on in autoscan mode. This

feature can be selected using the L3 or L4 options.

CPU Switch Smart SUN-MAC-PCIns tallation and Us e

Page 32

Download from Www.Somanuals.com. All Manuals Search And Download.

L1 - CPU Switch Smart SUN-MAC-PC only locks on to active ports during

autoscanning (default)

L2 - CPU Switch Smart SUN-MAC-PC locks on to every port in turn during

autoscanning