®
Calculite Incandescent Open Wall Washer T7032
Page 1 of 2
7 3/8” Aperture A21 / A23 / PS25
1
Top View
11"
PS-25
13 1/2"
4 7/8"
10 5/16"
A-23
11 1/2"
4
12 1/2"
9 5/16"
A-21
5
6
8
3"
7 1/8" Dia.
3/4" max.
Ceiling Thickness
1" min. - 2 1/8" max.
(Ceiling Runner)
7
3
Overlap
8 5/8"
2
Flush
7 7/8"
Overlap Self-Flange
Matte White or Polished
Molded
Trim Ring
Flush Trim
(Molded Trim Ring Removed)
Ceiling Cutout: 8" Dia.
Reflector Trims
Frame-In Kit
Lamp
White
Polished
Flush/White
Finish
Self-Flange
Self-Flange
Molded Trim Ring
Wall Washer
Specular Clear
Specular Gold
T7032CLW
U7032GDW
T7032CLP
U7032GDP
T7032CL
U7032GD
T701 Clear
U702 Gold
A21 150W
A23 200W
PS25 300W
Corner Wall Washer
Double Wall Washer
Specular Clear
Specular Gold
T7033CLW
U7033GDW
T7033CLP
U7033GDP
T7033CL
U7033GD
T701 Clear
U702 Gold
Specular Clear
Specular Gold
T7034CLW
U7034GDW
T7034CLP
U7034GDP
T7034CL
U7034GD
T701 Clear
U702 Gold
Features
Accessories / Options
1. Socket Cup: Die-cast aluminum cup effectively dissipates heat and assures
lamps maintain proper optical alignment to reflector. Snaps onto reflector
neck for easy tool-less installation. Can be adjusted without tools from
inside or outside of fixture to accommodate three different lamp sizes.
Contains medium base porcelain socket with nickel plated screw shell wired
and No 18 SF1 leads to J-Box
18" Mounting Bars
1950 (set of 2)
1951 (set of 2)
27" Mounting Bars
T-Bar Anchor Clips
Wood Joist Mtg. Bars
Existing Ceiling Clips
Step Down Transformer
Chicago Air Plenum
1956 (set of 4, for 1950 & 1951 bars)
7994 (set of 2)
7998 (set of 2)
7997 (see separate specification sheet)
LC (add suffix to Frame-in Kit)
2. Mounting Brackets: Adjust vertically from inside of fixture. Durable 16 ga.
steel construction. Use with standard 3/4” or 1 1/2”lathing channels, or 1/2”
(11/16" O.D.) EMT pipe (by others) or Lightolier accessory
mounting bars.
3. Retaining Springs: Precision-tooled springs secure reflector housing to
mounting frame for quick tool-less installation.
Electrical
UL Listed for a maximum of 8 No. 12, 75°C through branch circuit conductors, or
60°C supply conductors for end of run.
Labels
®
4. Insert Reflector: Alzak aluminum, 16 ga., "cut-window" reflector allows
UL Listed for damp locations, I.B.E.W.
light to pass to a separately contoured outer housing reflector. 50° visual
cut-off to lamp and lamp image. Insert reflector contours provide even down-
lighting. Direction of wall wash can be re-oriented after installation.
Attaches with screws for simple installation and maintenance. Reflector
supplied with white molded trim ring (field paintable); or self-flanged reflec-
tor, matte white flange or flange finish to match reflector.
®
Alzak is a registered trademark of ALCOA.
Job Information
Type:
Job Name:
Cat. No.:
5. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box allows inspection
from below.
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
Lamp(s):
Notes:
7. Mounting Frame: Die-cast aluminum suitable for dry or plaster ceilings.
Provides flangeless trim in plaster ceiling.
®
8. Wall Wash Reflector/Housing: Specular clear or gold 16 ga. Alzak alu-
minum to match insert reflector. Attaches to mounting frame with springs.
Detachable for inspection from below fixture. Reflector provides even wall
wash. Must be installed before ceiling is finished.
Lightolier a Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Other Reflector Finish Options
Consult Factory
Download from Www.Somanuals.com. All Manuals Search And Download.
|