MODEL HT-395
Digital Audio
Home Theater System
Turns Your DVD Player Into a Home Theater
Computer Compatible - Also Turns Your Computer Into a Home Theater (Cable Included)
The Perfect Sound System for Your DVD Player
Just add your TV & DVD player; everything else is in the box.
•
Incredible surround sound, perfect for DVD viewing & enhanced TV game experience.
•
Front panel GAME INPUT jacks.
Dual DIGITAL inputs - COAXIAL & OPTICAL.
•
•
PLEASE READ CAREFULLY BEFORE USE
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing this Digital Audio Home Theater System. This deluxe audio theater system turns your home into a
virtual theater. In addition to the incredible surround sound of a 5.1 channel audio source, such as your current DVD player, this
system also superbly enhances your other audio sources, such as a CD player, Computer, VCR, or a cassette deck. The only
thing you need to add is your own TV or other devices. We have designed this system to be easy to set up, but please, review this
manual before you operate your system. Please have it handy while you are setting the system up; and keep it available for
future reference, or in the unlikely event that you encounter any unexpected questions or problems. We have tried to keep this
manual as simple as possible. It begins with how to connect the speakers, your TV, and other optional devices. It also includes
instructions on how to position the speakers for the most natural surround sound. If you follow the instructions carefully you can
have the system set up in about an hour.
This system was designed to provide you with many years of reliable operation with a minimum of care and maintenance. Every
component in your system was perfect when it left our factory. If you experience any problem with the set up or operation of this
system, please review the Trouble Shooting Guide at the end of this manual before you contact the Customer Service Department
at 1-800-315-5885. (Monday - Thursday 9:00 AM - 5:00 PM, Friday 9:00 AM - 1:00 PM EST)
All of the adjustable system settings have been preset at our factory for normal operation of the system. All you have to do is to
sit back and enjoy the great home theater experience.
Later on, you may want to change some of the optional settings like speaker volume and balance or equalizer (tone) settings.
Instructions for changing them, are found later in this manual.
Basic Features & Benefits of this Digital Home Theater System:
1. Dolby Digital 5.1 channel audio decoder for real home theater surround sound.
2. Preset Equalizer for truly customized sound.
3. Center & Rear speaker variable delay time setting for added realism.
4. Digital coaxial & optical input jacks.
5. TV Game / Video Camera input jacks on the front panel.
6. Includes audio inputs for DVD COAXIAL, DVD OPTICAL, TV / VCR and AUX.
7. Fully customizable individual speaker level controls.
8. Powerful subwoofer provides real BOOM in your bass.
9. Automatic decoding of Dolby Digital & Dolby Pro Logic audio signals.
10. Night mode button automatically reduces the sound level to avoid disturbing others.
11. Deluxe easy-to-use remote control with batteries included.
12. Reset button conveniently returns speaker settings to the factory’s defaults.
13. Designed for easy, mistake-proof color-coded speaker setup.
14. Compatible with your computer sound system.
NOTE:
We recommend that you use this Home Theater System with your DVD player in order to experience the true 5.1 channel sound.
However, if you do not have a DVD player, you may still use this system to get better sound from your TV set or any audio device.
THIS SYSTEM CONTAINS
4 Satellite Surround
Speakers
1 Center Speaker
1 Subwoofer Speaker
with Wires
1 Main Unit
1 Remote Control
1 Set of Audio cables with
green 3.5mm plug for
Computer Connection
(or other Source with
3.5mm Jack)
1 set of Audio
Cables
(Red & White)
1 Yellow
Video Cable
5 sets of
Speaker Wires
2 “AAA”
batteries
1 Orange
Coaxial Cable
2
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
• Getting Started
Safety Instructions-------------------------------------------------------------------------------------------------------------------------------------1
Introduction----------------------------------------------------------------------------------------------------------------------------------------------- 2
Location of Controls----------------------------------------------------------------------------------------------------------------------------------- 4,5
Remote Control Operation---------------------------------------------------------------------------------------------------------------------------6
• Connections
Choose Your Connection-----------------------------------------------------------------------------------------------------------------------------7
Cables Needed to Connect Components to Your Home Theater System -------------------------------------------------------- 7
Speaker System Connections:
Speaker System Connections--------------------------------------------------------------------------------------------------------------------- 8,9
Speaker Positioning Information------------------------------------------------------------------------------------------------------------------ 10,11
TV Connections ---------------------------------------------------------------------------------------------------------------------------------------- 12
TV + DVD Connections ----------------------------------------------------------------------------------------------------------------------------- 13
TV + VCR Connections ----------------------------------------------------------------------------------------------------------------------------- 14
TV + VCR + Satellite Receiver Connections ------------------------------------------------------------------------------------------------15
TV + TV Game Connections ---------------------------------------------------------------------------------------------------------------------- 16
TV + Video Camera Connections ----------------------------------------------------------------------------------------------------------------17
AUX IN Connections --------------------------------------------------------------------------------------------------------------------------------- 18
Computer Connections ------------------------------------------------------------------------------------------------------------------------------ 19
• Amplifier
General ----------------------------------------------------------------------------------------------------------------------------------------------------20
Test Tones -----------------------------------------------------------------------------------------------------------------------------------------------21
Volume Adjustment-------------------------------------------------------------------------------------------------------------------------------------22
• Listening Mode --------------------------------------------------------------------------------------------------------------------------- 23
• Others
EQ Mode, Night Mode, Center & Rear Speaker Sound Delay ---------------------------------------------------------------------------- 24
• Trouble Shooting------------------------------------------------------------------------------------------------------------------------ 25
• Specifications -------------------------------------------------------------------------------------------------------------------------------26
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
3
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
1. MAIN POWER button - Press to switch the set on or off.
NOTE: This button must be on in order to be able to use
the REMOTE control.
2. REMOTE CONTROL SIGNAL sensor - Receives the
signal from the REMOTE CONTROL (Aim the REMOTE
control towards this sensor).
9. GAME indicator - For TV GAME or VIDEO CAMERA
sound use, press the SOURCE button till this lights or
press the GAME button on your REMOTE control.
10. TV / VCR indicator - For TV / VCR sound use, press the
SOURCE button till this lights or press the TV / VCR
button on your REMOTE control.
3. POWER/STANDBY indicator - This indicator has 2
colors: red and green (red is standby, green is on). When the
set is off (standby), pressing the SOURCE or MASTER
VOLUME buttons on the main unit, or pressing any button
on the REMOTE CONTROL will turn the set on. The
indicator will become green. Also this indicator will flash
confirming that you pressed any button on the REMOTE
CONTROL.
4. VIDEO IN jack - For connection of a video signal from a
TV game or video camera (see details on Page 16 & 17).
5. AUDIO LEFT jack - Connect to the left channel audio
output of a TV game or video camera.
11. AUX indicator - For Auxiliary input sound use, press the
SOURCE button till this lights or press the AUX button on
your REMOTE control.
12. STEREO indicator - In STEREO mode, this red indicator
lights up (for 2 channel sound).
13. DOLBY PRO LOGIC indicator - If a Dolby Pro Logic
Signal is received, this red indicator will light.
14. DOLBY DIGITAL indicator - If a Dolby Digital Signal
is received, this orange indicator will light.
15. VOLUME indicators - These indicators light up
showing the level of the master volume, also each
individual speaker’s volume.
6. AUDIO RIGHT jack - Connect to the right channel
audio output of a TV game or video camera.
7. DVD COAXIAL indicator - For DVD COAXIAL INPUT sound
use, press the SOURCE button till this lights or press the
COAXIAL button on your REMOTE control.
8. DVD OPTICAL indicator - For DVD OPTICAL INPUT sound
use, press the SOURCE button till this lights or press the
OPTICAL button on your REMOTE control.
16. MUTE indicator - In mute mode, this indicator will light.
17. SOURCE button - Press several times to select the sound
input source you want: DVD COAXIAL, DVD OPTICAL,
GAME, TV / VCR, or AUX.
18. MASTER VOLUME UP & DOWN control - Increases or
decreases the volume level of all speakers.
1. FRONT RIGHT SPEAKER jacks - Connect the FRONT
RIGHT SPEAKER to the red and black terminals.
2. FRONT LEFT SPEAKER jacks - Connect the FRONT LEFT
SPEAKER to the red and black terminals.
3. CENTER SPEAKER jacks - Connect only the CENTER
SPEAKER to the blue and black terminals.
4. REAR RIGHT SPEAKER jacks - Connect the REAR RIGHT
SPEAKER to the grey and black terminals.
5. REAR LEFT SPEAKER jacks - Connect the REAR LEFT
SPEAKER to the grey and black terminals.
9. VIDEO OUT jack - Connect to your TV’s video input jack.
(If your TV has no VIDEO jack, you have to buy a VIDEO
RF MODULATOR.)
IMPORTANT: This jack is only used if you are connecting
a TV GAME or VIDEO CAMERA to the set.
10. DVD VIDEO INPUT jack - Connect to your DVD’s video
out jack.
11. DVD COAXIAL DIGITAL INPUT jack - Connect to the
COAXIAL digital audio output of a DVD player to have
Dolby Digital 5.1 channel surround sound.
6. SUBWOOFER SPEAKER jacks
-
Connect the
12. DVD OPTICAL DIGITAL INPUT jack - Connect to the
OPTICAL digital audio output of a DVD Player to have
Dolby Digital 5.1 channel surround sound.
SUBWOOFER SPEAKER to the green and black terminals.
7. AUX AUDIO INPUT jacks - Connect to the audio output of a
tape deck or other component.
13. AC LINE CORD - Connect to a 120V/60Hz AC
standard wall outlet.
8. TV/VCR AUDIO INPUT jacks - Connect to audio output
of a TV or VCR.
4
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
1. ON/STANDBY button - Switches the player from STANDBY to ON or
ON to STANDBY (if the main POWER of the set is on).
2. MUTE button - Instantly turns off the sound. Press again to restore
the sound.
3. MASTER VOLUME UP button
of all speakers.
- Press to raise the volume level
4. MASTER VOLUME DOWN button
level of all speakers.
- Press to lower the volume
5. DVD OPTICAL button - Selects the DVD OPTICAL audio input mode.
The DVD OPTICAL indicator on the front panel will light.
6. DVD COAXIAL button - Selects the DVD COAXIAL audio input
mode. The DVD COAXIAL indicator on the front panel will light.
7. AUX button - Selects the AUXILIARY audio input mode. The AUX
indicator on the front panel will light.
8. TV / VCR button - Selects the TV or VCR audio input mode. The
TV / VCR indicator on the front panel will light.
9. GAME button - Selects the TV GAME (or VIDEO CAMERA) play mode.
The GAME indicator on the front panel will light.
10. STEREO button - Press to select STEREO (2 channel) listening mode,
and the STEREO indicator on the front panel will be on.
11. SURROUND button - Press to select Dolby Digital, Dolby Pro Logic
(5.1 channel) audio listening mode. The sound will come out of all 6
speakers.
12. TEST TONE button - Press to activate the test tone noise function to
check whether all your speakers are connected properly.
13. EQ button - Press to select different tone effects.
14. FRONT LEFT UP & DOWN VOLUME buttons - Press to adjust the
individual FRONT LEFT speaker’s sound level.
15. FRONT RIGHT UP & DOWN VOLUME buttons - Press to adjust the
individual FRONT RIGHT speaker’s sound level.
16. CENTER UP & DOWN VOLUME buttons - Press to adjust the
individual CENTER speaker’s sound level.
17. REAR LEFT UP & DOWN VOLUME buttons - Press to adjust the
individual REAR LEFT speaker’s sound level.
18. REAR RIGHT UP & DOWN VOLUME buttons - Press to adjust the
individual REAR RIGHT speaker’s sound level.
19. SUBWOOFER UP & DOWN VOLUME buttons - Press to adjust the
SUBWOOFER speaker’s sound level.
20. NIGHT button - Press to select NIGHT listening mode (Reduced sound
level).
21. CENTER DELAY button - Press to delay the center speaker’s sound.
22. REAR DELAY button - Press to delay the rear speaker’s sound.
23. TIME UP button - Press to increase the time amount of sound delay.
24. TIME DOWN button - Press to decrease the time amount of sound
delay.
25. RESET button - Press to reset all speakers’ outputs to the factory’s
default settings.
5
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL OPERATION
Battery Installation
Remote Control Operating Range
Remove the BATTERY COMPARTMENT DOOR of the REMOTE Point the REMOTE CONTROL unit within 20 feet from the
CONTROL and insert 2 size “AAA” alkaline batteries (included) remote control sensor and facing the front of the HOME
+
according to the
and
markings inside the BATTERY THEATER SYSTEM.
COMPARTMENT of the REMOTE CONTROL unit.
Gently push here and slide to
open the BATTERY DOOR.
Insert 2 size “AAA” batteries
as shown (included).
Remember, the spring touches the
battery.
side of each
Point the REMOTE CONTROL at the
Home Theater’s Front
Replace the door.
Make sure there is a clear path between the REMOTE
CONTROL and the HOME THEATER SYSTEM so that the signal
is not blocked.
Tips on Battery Use
Tips on REMOTE CONTROL Operation
Reversing polarities will damage the batteries and possibly
your REMOTE. Be sure to follow polarity + and - as indicated.
•
The REMOTE control’s operating distance may vary
according to the brightness of the room.
•
Do not mix different types of batteries together (Alkaline,
Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new
•
Do not point bright lights at the REMOTE CONTROL
SENSOR (like laser pointers).
•
ones.
When not in use for an extended period of time (over 60
Do not place objects between the REMOTE CONTROL unit
and the REMOTE CONTROL SENSOR.
•
•
days), remove the batteries to prevent possible acid leakage
or corrosion resulting in possible damage to your REMOTE
CONTROL.
Do not use this REMOTE CONTROL while simultaneously
using the remote control unit of any other equipment, the
signals may mix.
•
When the batteries have become discharged, they must be
disposed of in a safe manner that complies with all applicable
laws.
•
Sometimes your TV’s remote may cause an LED to flash,
you can ignore this.
•
Installation of batteries should only be done by an adult
(for safety).
•
6
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Choose Your Connection
There are several ways to connect your Home Theater System. Please use the following chart to determine which
connection is the best for you. Turn to the appropriate page and connect your Home Theater System.
COMPONENTS
CABLES NEEDED GO TO ...
TV
+
NOTE:
• Audio (included)
Page 12
HOME THEATER
(only)
This only applies if your
TV has audio out jacks.
TV/DVD
+
HOME THEATER
Video (included)
Coaxial (included)
Optical (not included)
•
Page 13
Page 14
•
•
Video (included)
Audio (included)
Antenna cable (not
included)
•
•
•
TV/VCR
+
HOME THEATER
TV/VCR
+
HOME
THEATER
+
Video (included)
Audio (included)
Antenna cable (not
included)
•
•
•
Page 15
DIGITAL HOME
THEATER SYSTEM
SATELLITE
TV
+
• Video
(special, not included)
HOME THEATER
+
TV GAME
or
Page 16,17
• Audio
(special, not included)
VIDEO CAMERA
TAPE RECORDER/PLAYER
AM/FM TUNER
or
other AUX
DEVICE
Page 18,19
• Audio (included)
+
HOME THEATER
Cables Needed to Connect Components to Your Home Theater System
The pictures below show the cables needed for the connections represented in this booklet.
NOTE: Audio cables are usually sold as a bundled set, but the connection sketches in this booklet show each cable separately for better
visibility. You need additional cables to connect everything shown above. Check your other equipments’ booklets to see what
cables are needed.
Yellow
Video cable
(included)
1 Set of Audio cables with
green 3.5mm plug for
Computer Connection
(or other Source with
3.5mm Jack)
Red & White
Audio cables
(included, most
installations will need
these)
Optical Cable
(not included)
Orange
Coaxial cable
(included)
Speaker Wires
(6 sets are included, and one
set is attached to the back
of the SUBWOOFER)
7
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEM CONNECTIONS
Speaker System Connections
Connect the supplied speaker system using the supplied The speaker wires and connectors are color coded for easier
speaker cords by matching the colors of the terminals to those set up.
of the cords.
• Connect the Front Left speaker to the Front Left terminals (FL).
• Connect the Front Right speaker to the Front Right terminals (FR).
• Connect the Center speaker to the Center speaker terminals (C).
• Connect the Rear Left speaker to the Rear Left terminals (RL).
• Connect the Rear Right speaker to the Rear Right terminals (RR).
• Connect the Subwoofer to the Subwoofer terminals (SUB).
IMPORTANT:
Before making connections, make sure the power is off. At the rear
of each supplied speaker you will find two spring type connectors
in different colors: a black one (-) and a red, blue or grey one(+).
(The Subwoofer does not have spring type connecting tabs at the
rear, only a set of black & green speaker wires from its back.)
QUICK SETUP DIAGRAM
IMPORTANT!
1. This Home Theater only improves the sound of your DVD system, it works excellently for Dolby Digital & Dolby Pro Logic
audio signals only when your DVD’s AUDIO OUTPUT is set to DIGITAL mode.
2. DTS signals can not be decoded by this set.
NOTE
In your package you will find 6 sets of colored speaker wire pairs for connecting your Home Theater to the 6 different
speakers:
• 1 green and black pair of wires for the subwoofer which comes out of the back of the subwoofer (12 1/2 feet long).
• 2 grey and black pairs of wires (26 feet long) for connecting the rear speakers with grey and black terminals.
• 1 blue and black pair of wires (13 feet long) for the center speaker with blue and black terminals.
• 2 red and black pairs of wires (13 feet long) for the front speakers with red and black terminals.
8
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEM CONNECTIONS
Tips for connecting the speaker wires To avoid short-circuiting the speakers
Push and hold the Speaker terminal tab down to insert each wire.
Release the tab to lock the wire into the terminal. Make sure the
wire is fully inserted, but the insulation is not covering the inserted
part of the speaker wires.
• Make sure the stripped end of each speaker wire does not
touch another speaker terminal or the stripped end of
another speaker wire.
Examples of poor connection of the
speaker wires
• Stripped speaker wire is touching another speaker terminal.
Make sure not even 1 strand of wire touches the other
wire!
• Stripped wires are touching each other due to excessive
removal of insulation. Do not allow the above to happen on
your set or speakers.
NOTE:
Be sure to match the speaker wire to the appropriate terminal on
the components: (+) to (+) (color), and (-) to (-) (black). If the wires
are reversed, the sound will be distorted and will lack some tones.
Follow the color codes of each speaker.
9
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER POSITIONING INFORMATION
Your system is supplied with 5 compact sized satellite speakers and
one large subwoofer. The satellite speakers reproduce only the mid
range and higher frequencies. All of the low frequency (bass) sounds
are produced by the subwoofer. Proper positioning and placement
of the speakers is important in order to provide the best surround
sound experience. We understand that due to the size and shape of
your listening room, and the location of your furniture, you may not
be able to set up the speakers exactly as per these diagrams. However
these simple guidelines will help you maximize your home theater
experience.
• Note the speaker levels are preset at the factory and most people
will not need to fine tune the sound of each speaker. We suggest
Your Usual Seat
you skip this part at first. Later on you can adjust the sound level of
each individual speaker. See Page 20.
• Although all 5 satellites are of the same size, the speakers inside
the cabinets are different. The speaker terminals on the back of the
cabinets are color-coded, as are the speaker wires and the speaker
terminals on the back of the main unit. Refer to the connection
diagram on page 8. Be sure you are using the correct satellite
speaker in each location, front, rear and center. Please follow
the colors for best results.
POSITION ALL 5 SPEAKERS APPROXIMATELY AT THE
SAME DISTANCE FROM YOUR LISTENING POSITION.
POSITION THE SUBWOOFER AS BELOW.
• For best surround sound effects, all 5 of the satellite speakers
should be approximately at the same distance from your usual
listening position.
POSITION THE SPEAKERS LIKE THIS FOR OPTIMAL LISTENING EXPERIENCE
• All 4 satellite speakers and the center speaker should be placed approximately the same distance from your listening
position.
• The center speaker should be placed directly above (or below) the TV set. Left and right front speakers should be
approximately at the same height as the center speaker.
• The rear speakers should be either in line with, or behind your listening position, approximately at ear level, or slightly
above.
• The subwoofer should be on the floor near the TV, or in any corner, with the front facing your listening position.
• All speakers must be visible. Do not hide them behind curtains, furniture, etc., as this will affect the sound.
10
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER POSITIONING INFORMATION
• The center speaker, as well as the other 4 satellite speakers,
can be positioned either vertically or horizontally.
• The left front, right front, and center speakers should be
placed at approximately the same height. The center
speaker reproduces most of the dialog spoken by the actors
on the TV screen, therefore it should be placed either directly
above or below the center of the TV set. Once you position
the center speaker, try to position the left front and right front
speakers at the same height. It is not recommended to place
any of the satellite speakers on the floor. Many people prefer
to place the center speaker horizontally above the TV set.
• The left rear and right rear speakers can be placed in line
with your listening position or behind your listening position.
Ideally they should be placed slightly above your ear level
when you are seated in your normal listening position.
• We have provided 2 keyhole openings on the backs of all
the satellite speakers that allow the satellite speakers to be
wall mounted in either a vertical or horizontal position.
• The subwoofer will provide the most dramatic bass effects
(low frequency sounds like explosions and thunder) when it
is placed on the floor. Do not place the subwoofer on a
stand or table. The subwoofer should be placed in the front
of the room so that it is facing towards your listening position.
It can be placed on either side of the TV or even in the
corner of the room, as far away as the cable will allow. The
bass sounds from the subwoofer are non-directional. You
will not really be able to tell where the bass is coming from.
• LONG ROOMS - In case your room is unusually long, you
may buy speaker wires from your dealer for adding wire
length to your speakers. Be careful not to allow the plus +
and minus - wires to touch each other. Use electrical tape
or plastic connectors to insulate the wires from each other.
11
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
(For better sound from TV shows)
TV CONNECTIONS
Home Theater System + TV (if your TV has Audio Output jacks)
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
RED & WHITE AUDIO
CABLES (INCLUDED)
NOTE: If your TV does not have audio output
jacks, it can not be used to improve your TV’s
sound.
NOTE: On some TVs, these jacks are in the front,
or your TV may not have these jacks.
If you have a cable box or satellite receiver,
you can connect the receiver AUDIO OUTPUT
directly to your TV/VCR AUDIO INPUT on the
back of the HOME THEATER SYSTEM.
1. Connect the 5 satellite speakers and subwoofer as shown on Page 8 (or the QUICK SETUP DIAGRAM packed
with the set).
2. Insert the stereo audio cables (included) into the TV / VCR AUDIO INPUT L (left=white) and R (right=red) jacks
on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your TV, this will
allow your TV’s sound to play through your HOME THEATER SYSTEM (If your TV set has AUDIO OUTPUT jacks).
NOTE: Your TV’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the TV (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button. The sound will come out of all 5
speakers plus the subwoofer.
NOTE: On some TVs, you may have to activate the audio out jacks of your TV. See your TV’s booklet.
NOTE: If the signal of your TV is not a true STEREO signal, even though it has stereo output jacks, when you press
the SURROUND button, the sound may not come out from all 5 speakers. This is normal.
NOTE: Some TVs may not allow the Home Theater to play all 5 speakers if the audio output level of the TV is
too low.
3. Insert the AC power cord into an AC outlet.
4. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
5. Press the SOURCE button on the main set several times till the TV/VCR indicator lights.
6. Go to Page 20 for detailed instructions.
NOTE: Your cable or antenna connection to your TV are not touched with this connection. Leave your antenna cable
to your TV as you normally would. No changes will be made to your current antenna connections.
12
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + DVD CONNECTIONS
Home Theater System + TV + DVD Player
NOTE: Some newer TV sets have
several VIDEO INPUT jacks. You
may use one of these for your
DVD player and the others for
connecting to the VIDEO OUT
jacks of the component. If your set
is older and only has a single
VIDEO INPUT jack, you may buy
a switch box to change video
signal from DVD to game, etc.
1. Insert the COAXIAL cable (included) or OPTICAL cable (not included) into the COAXIAL or OPTICAL DIGITAL
INPUT jack on the back of your HOME THEATER SYSTEM, and into the DIGITAL (COAXIAL or OPTICAL) jack on
your DVD player, this will allow your DVD’s Dolby Digital Audio sound to play through your HOME THEATER
SYSTEM.
NOTE: For a Dolby Digital recorded DVD disc, the sound will come out of all 5 speakers plus the subwoofer.
For a Stereo DVD disc (2 channel), the sound will only come out of the 2 front speakers
plus the subwoofer. This set will decode and automatically play back whatever sound system was recorded
on the DVD or audio disc. To manually change stereo (2 channel) audio to Dolby Pro Logic, press the
SURROUND button. The sound will come out of all 5 speakers plus the subwoofer.
NOTE: Make sure your DVD’s AUDIO OUTPUT is set to “DIGITAL”.
NOTE: DTS signals can not be decoded by this set.
2. Insert the video cable into the VIDEO OUT jack on the back of your DVD player, and into the VIDEO IN jack on
the back of your HOME THEATER SYSTEM.
3. Insert the video cable into the VIDEO IN jack on your TV, and into the VIDEO OUT jack on the back of your HOME
THEATER SYSTEM.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button on the main set several times till the COAXIAL or OPTICAL indicator lights.
7. Make sure your DVD player is on and follow your DVD player’s instructions.
8. Go to Page 20 for detailed instructions.
NOTE: Your cable or antenna connection to your TV are not affected with this connection. Leave your antenna cable
connected to your TV as you normally would. No changes will be made to your current antenna connections.
13
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VCR CONNECTIONS
Home Theater System + TV + VCR
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
1. Insert the stereo audio cables (included) into the TV/VCR AUDIO INPUT L (left=white) and R (right=red) jacks on
the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VCR, this will
allow your VCR’s sound to play through your HOME THEATER SYSTEM.
NOTE: Your VCR’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the VCR (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button on the REMOTE. The sound will come out
of all 5 speakers plus the subwoofer.
NOTE:Some VCRs may not allow the Home Theater to play all 5 speakers if the audio output level of the VCR is
too low.
2. Connect your VCR to your TV using a coaxial antenna cable (probably already connected), your VCR’s picture
will go to your TV through the antenna connection.
3. Connections of your other antenna cables are not changed when you add your HOME THEATER SYSTEM.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the TV/VCR indicator lights.
7. Make sure your VCR is on and follow your VCR’s instructions.
8. Go to Page 20 for detailed instructions.
14
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VCR + SATELLITE RECEIVER CONNECTIONS
Home Theater System + TV + VCR + Satellite
NOTE: On some TVs, this
jack is in the front.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
1. Follow the above connection diagram and check if you have these items. If your VCR has AUDIO OUT jacks, you may
connect your VCR to your HOME THEATER as shown.
NOTE: Your VCR’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the VCR (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
NOTE: Some VCRs may not allow the Home Theater to play all 5 speakers if the audio output level of the VCR is
too low.
2. Connect your VCR to your TV using a coaxial antenna cable (probably already connected), your VCR’s picture will go
to your TV through your existing antenna connection.
3. Use an antenna cable to connect the antenna output on the satellite receiver to the antenna input on the VCR the
same as you have it connected now. This audio HOME THEATER SYSTEM does not change any antenna connections.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the TV/VCR indicator lights.
7. Make sure your VCR is on and follow your VCR’s instructions.
8. Go to Page 20 for detailed instructions.
15
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + TV GAME CONNECTIONS
Home Theater System + TV + TV Game
NOTE: Your TV GAME may have
a special cable for connections.
This diagram is only for
illustration.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
(Optical cable is not included)
1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your
HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your TV GAME, this will allow your
TV GAME’s sound to play through your HOME THEATER SYSTEM.
NOTE: Your TV GAME may also have an optical jack for sound output. If you have an optical cable, you may connect your
TV GAME’s output to the HOME THEATER by using the optical cable for better sound (optical cable is not included).
2. Insert the yellow video cable (included with your TV GAME) into the VIDEO IN jack on the FRONT of your HOME
THEATER SYSTEM, and into the VIDEO OUT jack on your TV GAME.
3. Insert another video cable into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the VIDEO IN
jack on your TV.
NOTE: Your TV GAME’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the TV GAME (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button on the REMOTE. The sound will come out of
all 5 speakers plus the subwoofer.
NOTE: Some TV GAME may not allow the Home Theater to play all 5 speakers if the audio output level of the TV
GAME is too low.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the GAME indicator lights.
NOTE: In case you use an OPTICAL cable for sound, press “OPTICAL” on your remote for the TV GAME sound.
7. Make sure your TV GAME is on and follow your TV GAME’s instructions.
8. Go to Page 20 for detailed instructions.
16
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VIDEO CAMERA CONNECTIONS
Home Theater System + TV + Video Camera
NOTE: Your VIDEO CAMERA
may have a special cable (with a
triple 3.5mm plug on one side)
for connections. This diagram is
only for illustration.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your
HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VIDEO CAMERA, this will allow
your CAMERA VIDEO’s sound to play through your HOME THEATER SYSTEM. (NOTE: Many video cameras have
special plugs on one side to connect to your camera.)
2. Insert the video cable (included with your VIDEO CAMERA) into the VIDEO IN jack on the FRONT of your HOME
THEATER SYSTEM, and into the VIDEO OUT jack on your VIDEO CAMERA. (NOTE: Your video camera may have a
3.5mm triple jack, consult your camera’s booklet for details.)
3. Insert the video cable (included) into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the
VIDEO IN jack on your TV.
NOTE: Your VIDEO CAMERA sound will come out of the 2 front speakers plus the subwoofer since the default
setting for the sound output is the same as the audio source from the VIDEO CAMERA (2 channel,
STEREO). For “Dolby Pro Logic” (5.1 channel) sound reproduction, press the SURROUND button. The sound
will come out of all 5 speakers plus the subwoofer.
NOTE: Some video cameras may not allow the Home Theater to play all 5 speakers if the audio output level of the
video camera is too low.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the GAME indicator lights. (This setting is either for a Video Camera or a
TV Game.)
7. Make sure your VIDEO CAMERA is on and follow your VIDEO CAMERA’s instructions.
8. Go to Page 20 for detailed instructions.
17
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX IN CONNECTIONS
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
Illustration is showing some possible connections. You can only connect ONE of these components
•
to the AUX INPUT jacks of your HOME THEATER SYSTEM (AUX stands for Auxiliary).
You can hear the sound of any one of these devices through your HOME THEATER SYSTEM if you
•
connect the proper cables.
1. Insert the audio cables into the AUX OUTPUT L (left=white) and R (right=red) jacks of your stereo system, such
as a TAPE RECORDER PLAYER into the corresponding AUX INPUT AUDIO jacks on your HOME THEATER.
This will enable you to hear your components system through your HOME THEATER SYSTEM.
2. You may also use the green 3.5mm plug and cable (included) to connect your CD PLAYER, RADIO or other
device that has a 3.5MM stereo jack to your HOME THEATER SYSTEM.
NOTE: Your audio device’s sound will come out of the 2 front speakers plus the subwoofer since the default
setting for the sound output is the same as the audio source from the device (2 channel, STEREO). For
“Dolby Pro Logic” (5.1 channel) sound reproduction, press the SURROUND button. The sound will
come out of all 5 speakers plus the subwoofer.
NOTE: If the signal of your device (such as a CABLE/SAT BOX or some STEREO TVs) is not a true STEREO
signal, even though it has stereo output jacks, when you press the SURROUND button, the sound
may not come out from all 5 speakers. This is normal.
NOTE: Some devices may not allow the Home Theater to play all 5 speakers if the audio output level of the
device is too low.
3. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
4. Press the SOURCE button several times till the AUX indicator lights.
5. Make sure your AUX IN component is on and follow your component’s instructions.
6. Go to Page 20 for detailed instructions.
18
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPUTER CONNECTIONS
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
ONE SET OF AUDIO CABLES WITH 3.5MM
PLUG IS INCLUDED
1. Insert the green 3.5mm audio plug of the AUDIO cable (included) into the PC AUDIO OUT jack of your PC, and
insert the AUX INPUT L (left = white) and R (right = red) plugs into the corresponding AUX INPUT jacks on the
back of your HOME THEATER. This will enable you to hear your computer’s music through your HOME THEATER
SYSTEM.
2. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of this set, next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
3. Press the SOURCE button several times till the AUX indicator lights.
NOTE: Your computer’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the computer (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
NOTE: If the signal of your computer is not a true STEREO signal, even though it has stereo output jack, when you
press the SURROUND button, the sound may not come out from all 5 speakers. This is normal.
NOTE: Some computers may not allow the Home Theater to play all 5 speakers if the audio output level of the
computer is too low.
4. Make sure your computer is on and follow your computer’s instructions.
5. Go to Page 20 for other detailed instructions.
19
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER
General
1
Press the POWER button on the front panel of the main unit to turn the main
power on, press SOURCE or MASTER VOLUME buttons on the main unit,
or any button on the REMOTE control to turn the set on. Make sure the
POWER/STANDBY indicator is lit in green.
NOTE: The POWER/STANDBY indicator has 2 colors: red and green (green
is on, red is standby). When the set is off (standby), pressing the
SOURCE or MASTER VOLUME buttons on the main unit, or
pressing any button on the REMOTE CONTROL will turn the set on.
The indicator will become green. Also this indicator will flash
confirming that you pressed any button on the REMOTE CONTROL.
2
3
Press the SOURCE button on the front panel of the main unit repeatedly to
select one of the input sources, or press the individual COAXIAL,
OPTICAL, GAME, TV/VCR or AUX buttons on the REMOTE to select the
audio input source. The corresponding indicator will light.
For volume adjustments, press each individual speaker’s volume control
buttons:
+ raises the volume
lowers the volume
Follow this step to adjust the other
speakers as well. Or you may press
the MASTER VOLUME buttons to raise
or lower all speakers’ volumes at the
same time.
For details, see page 21.
4
To select the listening mode, press the SURROUND or STEREO button on
the REMOTE CONTROL.
NOTE: This set will decode and automatically play back whatever sound
system was recorded on the DVD or audio disc. For a Dolby
Digital 5.1 channel audio source, the sound will come out of all 5
speakers plus the subwoofer; for a Dolby Digital 2.1 channel or
other stereo audio source, the sound will only come out of the 2
front speakers plus the subwoofer. To manually change a stereo
(2 channel) audio to Dolby Pro Logic, press the SURROUND
button. The sound will come out of all 5 speakers plus the
subwoofer.
5
6
For different preset equalizers (tone selections) and sound effects, press
the EQ, NIGHT, DELAY TIME buttons on the REMOTE to select the
tones (frequency response) you like best (see details on page 24).
To momentarily shut off the sound, press the MUTE button. The red
MUTE indicator will light. Press the MUTE button again or press the
MASTER VOLUME buttons to restore the sound.
20
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER
Test Tones
You can check whether your speakers are connected correctly by using
the TEST TONE button.
1
Press the POWER button on the front panel of the main unit to turn the main
power on, press SOURCE or MASTER VOLUME buttons on the main unit,
or any button on the REMOTE control to turn the set on. Make sure the
POWER/STANDBY indicator is lit in green.
2
3
Press the TEST TONE button on the REMOTE.
You will hear a test tone (actually some blank noise similar to a steady
ocean wave) from the FRONT LEFT (FL), CENTER (C), FRONT RIGHT
(FR), REAR RIGHT (SR) and REAR LEFT (SL) speakers in sequence. The
VOLUME indicators on the front panel will show the corresponding speaker
which is being tested.
NOTE: If the set is in STEREO mode (the red STEREO indicator is on),
you will only hear a test tone from the FRONT LEFT (FL) and
FRONT RIGHT (FR) speakers. To change the set from STEREO
to Dolby Pro Logic or Dolby Digital mode, press the SURROUND
button on the REMOTE.
NOTE: You can stop the test tone by pressing any button on the
REMOTE control, or by pressing the SOURCE or MASTER
VOLUME buttons on the main unit.
RESET BUTTON
Pressing this button on the remote
control will reset all 5 satellite
speakers and the subwoofer to
their default settings and will also
reset the preset equalizer to the
normal position.
4
After your test, you may play the theater system or adjust the individual
volume controls while playing any music or movie and then retest the
levels if you like. You may then adjust each speaker’s volume level by
pressing the VOLUME controls of the individual speakers, so that from your
center listening position, they all have approximately the same sound level.
To restore all speaker levels to their factory defaults, press the RESET
button.
21
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER
Volume Adjustment
1
To adjust the master volume
(Change all the speakers’ volume settings at the same time), press the
MASTER VOLUME buttons on the main unit or on the REMOTE to
decrease or increase the master volume level.
raises the volume
lowers the volume
The VOLUME indicator on the front panel will show the corresponding
volume level as progressively lit LED lamps:
VOLUME
As the volume increases, more LED lamps will light up.
VOLUME
Minimum volume level (no LED lit).
VOLUME
Maximum volume level (all LEDs lit).
2
To adjust the individual speaker’s volume:
+
Press the FRONT LEFT VOLUME CONTROL
or
button on the
REMOTE to adjust the sound level of the FRONT LEFT SPEAKER.
Do the same to adjust the volume of the other individual speakers: FRONT
RIGHT SPEAKER, CENTER SPEAKER, REAR LEFT SPEAKER, REAR
RIGHT SPEAKER and SUBWOOFER SPEAKER.
NOTE 1: Every time you turn the set on, the
MASTER VOLUME will go back to
the factory’s default settings; and
whenever you press the SOURCE
button on the main unit or one of the
source buttons on the REMOTE
control (COAXIAL, OPTICAL, GAME,
TV/VCR or AUX), the MASTER
VOLUME will go back to the factory’s
default settings. This avoids sudden
very loud sounds from startling you.
VOLUME
The default
volume control
VOLUME
NOTE 2: Pressing the VOLUME CONTROL
buttons of the individual speaker
could only fine tune the volume of the
individual speaker. Press the
MASTER VOLUME buttons on the
main unit or on the REMOTE to
decrease or increase the master
volume level.
Increased volume
level
VOLUME
Decreased volume
level
22
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING MODE
Dolby Digital (also known as AC-3 or Dolby 5.1) surround sound system
delivers a realistic and dynamic sound similar to the latest movie theaters. All
five speakers and subwoofer must be connected for correct Dolby Digital
Surround Sound reproduction. Each channel plays its own unique role in
providing the proper sound. Front left, center and front right speakers join rear
left and rear right to reproduce high, mid and bass frequencies in separate five
full-range channels of surround sound. Bass rumble, explosions and low
frequency effects you feel are heard through the subwoofer. Most DVD movie
discs have been recorded in Dolby Digital surround sound mode. This set will
automatically select the correct Dolby mode according to source provided.
1
Press the SOURCE button on the front panel of the main unit repeatedly to
select one of the input source, or press the COAXIAL, OPTICAL, GAME,
TV/VCR or AUX button on the REMOTE to select your required audio input
source directly. The corresponding indicator will light.
NOTE: This set will decode and automatically play back whatever
sound system was recorded on the DVD or audio disc. For a
Dolby Digital 5.1 channel recorded DVD disc, the orange Dolby
Digital indicator will be on and sound will come out of 5
speakers plus the subwoofer. For a Stereo DVD disc
(Dolby Digital 2 channel), both the orange Dolby Digital
and red stereo indicators will be on and the sound will
only come out of the 2 front speakers plus the subwoofer.
For other stereo audio source, the red STEREO indicator will be
on, and the sound will only come out of the 2 front speakers
plus the subwoofer. To manually change a stereo (2 channel)
audio to Dolby Pro Logic, press the SURROUND button. The
sound will come out of all 5 speakers plus the subwoofer.
(However the REAR speakers may be lower because this is
not the natural way the sound was recorded. This is normal.)
2
Press the SURROUND button on the REMOTE control to select 5.1
channel sound format. Press the STEREO button to select the stereo mode.
The chart on the left shows different indicators for different signals in
different modes.
NOTE: If the input signal is Dolby Digital sound format, the orange DOLBY
DIGITAL indicator will be on, two listening modes can be selected:
Dolby Digital or STEREO. Try each to see what you prefer. Some
programs may sound better in the STEREO mode.
A. If a Dolby Digital 2.1 channel sound input signal is received, both the
Stereo and Dolby Digital indicators will be on. Sound will only come out
of 2 front speakers plus the subwoofer.
B. If a stereo sound signal is received from AUX, only the STEREO
indicator will be on. Sound will come out of 2 front speakers plus the
subwoofer.
23
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
EQ Mode
You can press EQ button repeatedly on the REMOTE CONTROL to choose from
7 different tone effects:
Standard, classical, jazz, rock, pop, ballad & dance.
The volume indicators will change according to different EQ mode as follows:
Standard
Classical
First LED lights
Second LED lights
Jazz
Rock
Middle LED lights
4th LED lights
Pop
Ballad
Last LED lights
First 2 LEDS light
Dance
NOTE:
Each type of equalizer setting is
indicated by different indicators
lighting up.
2nd & 3rd LEDS light
NIGHT Mode
This reduces the speaker output level to avoid annoying others with loud sounds.
NOTE: This function is only working when the set is in DVD digital Dolby AC-3 mode.
Pressing the NIGHT button on the REMOTE CONTROL to choose night mode. The signal dynamic range will be decreased by 10 dB.
All the volume indicators on the front panel will light instantly and go back to the original mode after 2 seconds.
All indicators light up
The original volume level
Press the NIGHT button again to cancel the night mode. The signal dynamic range will resume to the original value. All the VOLUME
INDICATORS on the front panel will go off instantly and go back to the original mode after 2 seconds.
CENTER / REAR SPEAKERS SOUND DELAY
Some rooms will reproduce the sound effects of a theater if several of the speakers have a slight time delay. This set allows you to
adjust the time delay of the CENTER & REAR speakers by using the remote control.
NOTE: 1 millisecond (1/1000 of a second) equals approximately 1 foot of sound travel.
To set the sound delay of the CENTER or the REAR speaker, press the CENTER or REAR delay button, then press the
button.
or
A. When in Dolby Digital 5.1 channel mode:
For the Rear speakers, the factory’s default setting is 6ms, the delay allowance is 0 ~ 15ms. Each press will reduce or increase a
3ms delay.
For the Center speaker, the factory’s default setting is 0 ms, the delay allowance is 0 ~ 5ms. Each press will reduce or increase a
1ms delay.
B. When in Dolby Pro Logic mode, you can only adjust the delay time of the rear speakers, the factory’s default setting is 21ms and
the delay allowance is 15 ~ 30ms. Each press will increase or decrease a 3ms delay.
24
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Remedy
Symptom
1. Is the power cord firmly plugged into the power outlet? Insert the AC power plug securely
into the power outlet. Make sure your outlet has power, you can check this by plugging a
lamp into the outlet to see if works.
2. One of the safety mechanisms may be operating. In this event, unplug the player from the
power outlet briefly and then plug it in again to reset the set.
No power
Make sure your DVD’s video cable is plugged into your TV set. This Home Theater only
improves the sound of your DVD player, it does not affect the video at all. Also adjust your TV’s
VIDEO INPUT.
Your DVD player has no picture
1. Check that the speakers and components are connected securely and correctly (see
Page 8, 9). Also check speaker volume (see Page 22).
2. Make sure your source (DVD or other) is plugged in and operating. Also check that
component’s booklet, maybe you need adjust that component.
No sound or only a very low-level
sound is heard.
Distorted sound.
•
3. Make sure that you have selected the correct source on the system (DVD or other).
4. Ensure that the input settings for the TV and stereo system are correct.
5. Adjust the master volume settings on the HOME THEATER’s remote.
6. Ensure the MUTE button is not pressed on the HOME THEATER remote (If yes, press the
MUTE button again, the MUTE indicator will go off).
•
7. The audio or speaker connecting wires are damaged. Replace them with new ones.
1. Check if the batteries are installed with the correct polarities (
and
).
+
2. If the batteries are weak or dead, replace them with new ones (size “AAA”).
3. Point the remote control unit at a distance of less than 20 feet from the main unit of the
HOME THEATER system.
The REMOTE CONTROL unit does not
work.
4. Remove any obstacles between the remote control unit and remote control sensor.
5. If the battery terminals are dirty or corroded, clean them with sandpaper.
Press the POWER button on the MAIN UNIT to turn the set ON. Then press the ON/STANDBY
button on the REMOTE. The HOME THEATER may not be operating properly due to
lightning, static electricity, or some other external factors. Reset the player by disconnecting the
power plug and then re-connecting it before calling customer service.
No buttons operate (on the main unit and / or
the REMOTE CONTROL unit).
Humming noise is heard even if the set
stopped.
This is a normal sound the cooling fan inside makes. This will stop if the power is off. Press the
ON/STANDBY button on the REMOTE to put the set in STANDBY mode.
1. Check that the speakers and components are connected correctly and securely.
2. Adjust front balance by pressing the volume controls of the left and right speakers on the
REMOTE (see Page 22).
The left and right sounds are unbalanced or
reversed.
1. Check that the speakers and components are connected securely.
2. Insert all wires firmly, follow the setup pages starting on Page 7.
Loud hum or noise is heard.
The surround effect is difficult to hear when
playing a Dolby Digital sound track.
Depending on the digital sound input, the output signal may at times be monaural or stereo even
if the main sound track is recorded in Dolby Digital format.
The input audio signal is stereo. This set will decode and automatically play back sound in the
format that was originally input. This is normal. Press the SURROUND button on your remote to
hear all speakers.
The sound comes from the 2 front speakers
and subwoofer only.
During DVD play, the STEREO
indicator is on.
If your DVD disc was recorded with PCM, this is normal. Press the SURROUND button.
1. Make sure the Center speaker’s volume is set to a normal level (see Page 22).
2. Adjust the center speaker volume by pressing the volume control buttons of the center
speaker on the REMOTE (see Page 22).
No sound is heard from the center speaker.
3. If you are listening to a stereo broadcast, only 2 front speakers (plus the subwoofer) will
have sound.
1. If you are playing a stereo CD, only the FRONT speakers plug the subwoofer will have sound.
2. Make sure the volume control of the rear speakers are set to normal levels (see Page 22).
3. Adjust the rear speakers’ volume by pressing both of the REAR the VOLUME control
buttons on the REMOTE.
No sound or only a very low-level sound is
heard from the rear speakers.
4. Check if the input signal is DTS signal. DTS signals can not be decoded by this set.
Double check if input & output jacks were inserted properly. Also ask a friend to help you before
calling customer service.
The system does not operate properly.
Slight delay when switching from digital to
analog input.
This is normal, as the set tries to detect stereo or 5.1 channel signals.
The NIGHT button has no function.
This button is only working when the set is in DVD digital Dolby AC-3 mode.
25
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
Power requirements ----- AC 120V, 60Hz
Power consumption ------55W
1
Main Unit Dimensions ---14 1/8 x 10 1/2 x 2 /8 inches / 36.0 X 26.6 X 5.4 cm
Weight ---------------------- 7.23 lbs / 3.25 kg
Audio Power Outputs
Total output power: 100 Watts at Maximum
Distortion
0.06% @ reference output
Remote Operating Range
Within 20 feet between the main unit and the remote.
Speakers
Subwoofer ------------------ Dimensions: 7 1/16 x 10 5/8 x 9 inches / 180 X 270 X 245 mm
Weight: 6.13 lbs / 2.78 kg
1
1
3
Front Left ------------------- Dimensions: 4 /4 x 3 /2 x 4 /8 inches / 101 X 90 X 110 mm
Weight: 0.88 lb / 0.4 kg
1
1
3
Center -----------------------Dimensions: 4 /4 x 3 /2 x 4 /8 inches / 101 X 90 X 110 mm
Weight: 0.88 lb / 0.4 kg
1
1
3
Front Right ----------------- Dimensions: 4 /4 x 3 /2 x 4 /8 inches / 101 X 90 X 110 mm
Weight: 0.88 lb / 0.4 kg
1
1
3
Rear Left ------------------- Dimensions: 4 /4 x 3 /2 x 4 /8 inches / 101 X 90 X 110 mm
Weight: 0.71 lb / 0.32 kg
1
1
3
Rear Right ----------------- Dimensions: 4 /4 x 3 /2 x 4 /8 inches / 101 X 90 X 110 mm
Weight: 0.71 lb / 0.32 kg
DURABRAND reserves the right to make design and specification changes for product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT
ON A SURFACE WITH A NATURAL OR LACQUER FINISH.
For customer service of this Durabrand product
Visit Our Website: http://www.lenoxx.com
or Dial 1-800-315-5885 (MONDAY-THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Write to:
LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
© 2003 LENOXX ELECTRONICS CORP.
MADE & PRINTED IN CHINA
26
IB-HT395-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
|