PROGRAMMABLE COMPACT DISC PLAYER
MODEL CD-566
OPERATING INSTRUCTIONS
PLAYS ALL MUSIC COMPACT DISCS, CD-R & CD-RW
•
• PUSH BUTTON ELECTRONIC VOLUME CONTROL
6 DIGIT LCD VISUAL DISPLAY
•
TRACK REPEAT & DISC REPEAT
DELUXE STEREO HEADPHONES INCLUDED
USES 2 SIZE “AA” BATTERIES (NOT INCLUDED)
•
•
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm1 d
1/19/2005, 8:45 PM
POWER SOURCES
Power your CD player by connecting an optional AC ADAPTOR or by inserting 2
size “AA” fresh alkaline batteries.
1.USING WITH BATTERIES
Insert two size “AA” alkaline batteries according to the
+ and markings on the bottom of the set.
NOTE: Player will not work, and batteries will be
drained, if batteries are not inserted as shown
on the bottom of the set.
TIPS ON BATTERY USE
Reversing polarities will damage the batteries and possibly this set. Be sure to
follow polarity ( + and ) as indicated.
•
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium
etc.), or old batteries with new ones.
•
When not in use for an extended period of time, or while internal batteries will not
be used, remove them to prevent possible acid leakage or corrosion resulting in
damage to this player.
•
When the batteries have become discharged, they must be disposed of in a
safe manner that complies with all applicable laws.
•
Installation of batteries should only be done by an adult (for safety).
•
ALKALINE BATTERY LIFE
Bear in mind that battery life expectancy is based upon volume level.
Maximum battery power consumption happens at maximum settings. Typical life
for 2 size “AA” fresh alkaline batteries is about 8 hours of continuous CD play.
2.AC ADAPTOR (OPTIONAL)
Before you buy an optional AC Adaptor, please note, the only AC ADAPTOR suitable
for this player is DC 4.5V 600mA (or greater), with PLUS center polarity
.
Others may damage your player. Please check voltage and current (mA) before
buying an AC ADAPTOR. If you can not find the suitable AC Adaptor in the market,
please send a $8.00 money order (included shipping and handling) to our customer
service center to order the adaptor (please also mark the model number of your
player): LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008
WHEN
SHOWS OR FLASHES IN THE DISPLAY
While the CD is playing, if the alkaline batteries are weak or discharged, this symbol
“
” shows or flashes in the display, then the power automatically turns off. If this
occurs, replace both alkaline batteries (also if the display does not show anything,
the batteries are dead).
NOTE: You may use rechargeable batteries on this set. However, because
rechargeable batteries generally have lower voltage (1.2 volts instead of 1.5
volts), your playing time will be much less than normal fresh alkaline batteries.
2
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm3 d
1/19/2005, 8:45 PM
CD PLAYING
1 Load the disc.
Push here
Disc
LABEL SIDE UP
PRESS TO OPEN
2 Connect the headphones.
STEREO
HEADPHONES
TO PHONES JACK
3 Press the PLAY/PAUSE button (
) to turn on the set.
TRACK NUMBER ELAPSED PLAYING
CURRENTLY TI ME OF THE
PLAYING CURRENT TRACK
PLAY/PAUSE
BUTTON
4 Adjust the volume.
INCREASE
DECREASE
NOTE: The default volume level is 20, every time you turn off the CD player and play
it again, the volume level will go back to 20, you can press the volume control
(+ or -) buttons to adjust the volume up or down.
3
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm4 d
1/19/2005, 8:45 PM
OTHER OPERATIONS
Operation
Display window shows
Press
To pause play
PLAY/PAUSE button
TRACK NUMBER
CURRENTLY
PLAYING
PLAYING TIME
FLASHES
To release pause
and resume play
PLAY/PAUSE button
STOP button
TRACK NUMBER
CURRENTLY
PLAYING
PLAYING TIME
ADVANCES
To stop play
TOTAL TRACKS
TOTAL PLAYING
TIME
Press the STOP button once and wait 30 seconds, or
press STOP button twice quickly.
To turn off the power
To skip to the next
track(s)
once (or repeatedly)
once (or repeatedly)
To skip to the previous
track(s)
Keep
depressed and release it when the desired
music section of the disc is found.
If you press and hold the SKIP button (
) while the
•
To go ahead at high
speed (search for-
ward)
last track is playing, and the end of the track is
reached, the music stops and the display will show
the total tracks and total playing time of the CD, then
the power will shut itself off after 30 seconds.
Keep
depressed and release it when the desired
To go back at high speed
(search backward)
music section of the disc is found.
NOTE:This set is not designed for jogging and doesn’t have skip protection. The
sound may skip or stop when the set is shaken or quickly moved.
4
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm5 d
1/19/2005, 8:45 PM
REPEAT, INTRO AND RANDOM PLAY
You may have repeat, intro or random play using the REPEAT button. Press the RE-
PEAT button several times, and the display will show the followings in turn:
REPEAT 1
REPEAT ALL
INTRO
RANDOM
NORMAL PLAY
REPEAT
SINGLE TRACK REPEAT
x 1
Plays one song over and over till you press STOP.
During play, select the song you want to repeat with either
of the SKIP buttons (
or
), then press the REPEAT
button once, the symbol REPEAT 1 will show in the display.
REPEAT 1
The song currently playing will repeat over and over, until
you press STOP.
REPEAT x 2
ALL TRACKS REPEAT (DISC REPEAT)
Repeats all songs in order till you press STOP.
During play, press the REPEAT button twice, the symbol
REPEAT ALL will show in the display.
All songs will keep playing in sequence 1, 2, 3, etc. and
when finished, will start all over again until you press
the STOP.
REPEAT ALL
INTRO PLAY
This plays the first 10 seconds of songs in
sequential order.
REPEAT
1. During play, press the REPEAT button three times,
the symbol INTRO will flash in the display.
2. Press the PLAY/PAUSE button, the symbol INTRO
will stop flashing and the first 10 seconds of each
song on the CD will play in sequential order.
3. When you find a song you like, press the PLAY/PAUSE
button, the symbol INTRO will disappear from the
display, normal play will be resumed, that song (and
the following songs) will play normally.
x 3
INTRO
RANDOM PLAY
REPEAT
This plays the songs on the disc in a random order.
1. During play, press the REPEAT button four times,
the symbol RANDOM will flash.
x 4
2. Press the PLAY/PAUSE button, this will play all of the
songs in random order selected by the CD player.
The RANDOM will stop flashing.
3. Press the SKIP button
song.
RANDOM
to skip to the next random
IB-CD566(CDX35A-0A3)-WM-E-011905
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm6 d
1/19/2005, 8:45 PM
PROGRAMMED PLAY
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example
etc.
etc.
Program Number
Track Number (song number)
1
3
2
5
3
8
4
1
5
2
6
4
7
1
8
1
During programming, the symbol PROG (program) flashes in the display. To program
songs to play in your preferred order, follow steps below:
1.Press the PROGRAM button.
Program #2 will now show in the display,
ready for your next selection of track.
PROG
.
PROG
The symbol “PROG ” and “
” will flash
in the display.
4. Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5. After programming is finished, press the
PLAY button to begin programmed play.
The symbol PROG shows in the display
and music begins.
PRO G
Program number
PLAY/PAUSE
2.Press the SKIP button (
or
) to
select track number 3 (example). The
symbol “PROG” and “ ” will flash in the
display.
SKIP
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button once. Then you may press PLAY/
PAUSE button to restart normal play.
PROG
Track number
Your programmed memory will be
lost:
3.Press the PROGRAM button to confirm.
The track 3 is now programmed.
When the power is off, or the CD Door
•
is opened.
PROG
.
When the alkaline batteries are
•
exhausted or removed, or the AC
ADAPTOR is disconnected.
6
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm7 d
1/19/2005, 8:45 PM
MAINTENANCE
Handling Compact Discs
cause skipping or noise.
Cleaning the lens
Dirty, scratched or warped discs may
•
A dirty lens will cause sound skipping. If
the lens is very dirty, the player may not
work. We suggest using a special
cleaning disk (not included) available in
most music and Hi-Fi stores. However,
if you do not have one, you may use the
instructions below.
Handle the disc only by the edges. To
keep clean, do not touch its surface.
•
Discs should be stored in their cases
•
after use to avoid scratches.
Do not expose discs to direct sunlight,
•
Use
a
cotton swab very slightly
high humidity, high temperatures, or
dust, etc. Prolonged exposure to
extreme temperatures can warp the
disc (such as leaving the discs in your
car during summertime).
dampened with alcohol to clean the lens.
Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is
very dirty, dampen (not dripping wet) the
cloth with a weak solution of soapy water,
and then wipe clean.
Do not stick or write anything on either
•
side of disc. Sharp writing instruments,
or the inks used in some felt-tipped pens,
may damage its surface.
Cleaning the Discs
Fingerprints should be carefully wiped
•
To remove the Disc
from the surface of disc with a soft
cloth. Unlike conventional records,
compact discs have no grooves to
collect dust and microscopic dirt, so
gently wiping them with a soft cloth
should remove most particles. Wipe
in a straight motion from the center to
the edge.
Open the CD DOOR by pressing the CD
DOOR OPEN button, hold the disc by the
edge while slightly pressing on the center
spindle as illustrated, then lift it from the
edge to release and remove.
NOTE:
Never use thinner, benzine, record
Always press the STOP button and wait
•
cleaner or antistatic spray on a compact for the disc to stop rotating before
disc. Such chemicals can damage its pressing the CD DOOR OPEN button to
plastic surface.
remove the disc.
7
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm8 d
1/19/2005, 8:45 PM
SAFETY PRECAUTIONS
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer
servicing to qualified service personnel only.
Do not insert pins or coins, clips, or any objects inside the set.
This set is equipped with a safety device which automatically turns the laser beam off
when the disc door is opened.
Do not drop the set or subject it to strong shocks. Doing so could result in damage.
Do not place the set in locations where the temperature is high, or in humid or dusty
locations, or locations with long heavy vibrations, or tilted surfaces.
The set’s cabinet may warp or the set may otherwise be damaged if it is placed in
direct sunlight, near heaters (where the temperature is 1400F/600C or higher) or in
cars with the windows closed. In the summer, the temperature may get as high as
2120F/1000C or more.
Use the set within a temperature range of 410F/50C to 950F/350C.
Use ONLY the optional DC 4.5V 600mA AC Adaptor with polarity
, others
may damage this set. Disconnect the Adaptor from the wall outlet when the set is not
to be used for an extended period of time (3 days or more).
When cleaning this set, use a soft dry cloth. Do not use solvents or commercially
available cleaners, as they may damage or discolor the finish.
Do not wear headphones while operating a motor vehicle. This could create a traffic
hazard and is illegal in many areas. Do not use this set when bicycling or running.
The headphones supplied with this set provide superb stereo listening while allowing
you to hear some outside sounds when listening at normally low volume levels.
Listening at extremely high volume levels minimizes the intrusion of outside noise/
sounds. In the interest of safety, it is strongly advised against the use while engaging
in activities where the exclusion of external sounds (whistles, horns, sirens, traffic,
etc.) could be hazardous. Also loud volume can hurt your ears. If you notice that the
sound has become weak or distorted or if tracks do not change, this is an indication
that the batteries are weak. Replace both batteries at the same time (see USING
WITH BATTERIES).
This CD-566 is identified by a serial number located in the BATTERY COMPARTMENT.
Record this number in the space provided below.
Model CD-566
Serial No.
Date Purchased:
This Instruction Manual contains detailed information on its safety and use. Please
read it carefully so that you may take full advantage of its many features, and ensure
a safe reliable operation. Keep this Instruction Manual for future reference.
CONDENSATION
If cold water is poured into a glass, water droplets form on the outside of the glass. This
is called condensation. Condensation may occur on internal operating parts of the lens.
Condensation occurs:
When the set is brought from the cold outdoors into a warm room, or if it is in a cold room
to a room which is heated, or in the summer, if the set is moved from an air-conditioned
room or car to a hot or humid location.
Should condensation occur, the set may not operate properly. Open the CD DOOR and
wait for about 20 minutes (to allow the internal parts to adjust to the surrounding
temperature) before using the set.
8
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm9 d
1/19/2005, 8:45 PM
IMPORTANT INFORMATION REQUIRED BY THE FCC
Since the CD circuitry may cause interference to other radios nearby, switch this
set off when not in use or move it away from the affected radios.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet safety standards of the FCC
requirements and compliance with safety performance of the U.S. Department of Health
and Human Services, and also with FDA Radiation Performance Standards 21 CFR
Subchapter J.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•
LASER SAFETY
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM,
DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE.
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN
EYES. THIS IS A CLASS-1 LASER PRODUCT. USE OF ADJUSTMENTS OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM
EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER
MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD
PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS
COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.
9
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm10d
1/19/2005, 8:45 PM
TROUBLE SHOOTING
Causes
Solutions
Symptoms
Replace both batteries with fresh
alkaline batteries. Battery life with
fresh batteries is about 8 hours for
continuous CD play (rechargeable
batteries have 1/2 of that life).
Batteries are weak (they
may test OK on tester but
they are weak for CD
operation).
Tracks
do
not
change or set does
not play normally.
Replace both batteries with fresh
ones.
Dead or weak batteries.
CD Player will not
turn on.
The
optional
AC Check the optional AC ADAPTOR
ADAPTOR not connected connection at AC outlet and the
properly.
right of the set.
Re-insert disc with label side
facing up.
Disc inserted incorrectly.
Replace the disc (this set will not
play damaged or scratched CDs),
or buy a disc repair polisher to
repair it yourself.
Disc scratched or dirty.
Disc will not play.
Try another compact disc, this set
will not play MP3 or WMA discs.
Defective compact disc.
CD DOOR not closed.
Close the door securely.
Take out the CD disc and leave
the CD Door open for about 20
minutes to dry the moisture
condensation.
Moisture has formed
inside the CD deck.
No sound from
headphones.
Replace with fresh batteries or
use the optional AC ADAPTOR.
Weak batteries.
The compact disc or lens is
dirty or CD is scratched.
Clean or replace the compact disc
or clean the lens.
Sound is skipping or
sound stops.
This set is not designed for jog-
ging and doesn’t have anti-skip
protection function.
The set is shocked.
Lower the VOLUME control by
pressing the decrease ( ) button.
Music is too loud.
Weak batteries.
Sound is distorted.
Replace both batteries or use the
optional AC ADAPTOR.
Remove batteries and the optional
AC ADAPTOR. Wait 15 seconds
and re-insert. Make sure batteries
are fresh or the optional AC
ADAPTOR has power.
Buttons do not
work.
Electronic or static error
caused circuitry to lock.
10
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm11d
1/19/2005, 8:45 PM
TECHNICAL SPECIFICATIONS
General
Maximum output (stereo headphones)............
Power Supply
20mW + 20mW
AC Adaptor Input ..........................................
DC ................................................................
120V/60Hz-4.5V, 600 mA DC Output (optional)
3V: Using 2 size “AA” alkaline batteries
(not included)
Set Dimensions (approximate)
Width ..........................................................
Depth ..........................................................
Height .........................................................
Weight (approximate) ........................................
5 5/8"
6 1/8"
1"
9.5oz. (270g) (set only)
CD Player Section
Frequency response .........................................
Sampling frequency ..........................................
D/A converter ....................................................
Error correction method ....................................
Pickup ..............................................................
50Hz - 15kHz +1/-2dB
44.1kHz
1-bit
CIRC
Optical 3-beam semiconductor laser
(780 nm wavelength)
Laser diode material GaAIAs
Laser output less than 44.6µW
NOTE:This CD player will play NORMAL music CDs (or CD-R/CD-RW CDs).
Because the products are subject to continuous improvement, LENOXX reserves the
right to modify product designs and specifications without notice and without incurring
any obligation.
LIMITED WARRANTY
We warrant this product to be free from defects in material and workmanship under normal use for
a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should
it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will service or exchange, at no charge,
the set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day period expires, and for
a period of 12 months from original purchase, we will repair the unit covering any part(s) that need to be
replaced at no charge, but will charge for the cost of labor, return postage paid by Lenoxx.
This warranty does not apply to any products which have been subject to misuse, neglect or
accident. This warranty does not cover broken headphones or cabinet. UNDER NO CIRCUMSTANCES
WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. The following charges apply to repairs beyond the warranty period: $6.00. Be sure to pack
carefully and return postage paid insured together with your money order (personal checks will not be
accepted) and sales receipt to:
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008.
For customer service Dial: 1-800-315-5885
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
© 2005 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
11
IB-CD566(CDX35A-0A3)-WM-E-011905
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm12d
1/19/2005, 8:45 PM
|