L1940p Wide
Download from Www.Somanuals.com. All Manuals Search And Download.
Product number
4424-HB6
First Edition (August 2008)
© Copyright Lenovo 2008.
All rights reserved.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and
are asold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted
rights to use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: IF products, data, computer software, or services are delivered
pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to
restrictions set forth in Contract No. GS-35F-05925.
Ț ꢀ˜™¢›’‘ ꢁŽ—˜Ÿ˜ ŘŖŖ8.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety information ……………………………………………………………………iii
Safety and Maintenance Guidelines ………………...…………………………………iv
Chapter 1. Getting started ……………………………….…………………………1-1
Shipping contents ………………………………………………………………………………………..… 1-1
Product overview ………………………………………………………………………………………..… 1-2
Types of adjustments ……………………………………………………………………………………... 1-2
User controls ……………………………………………………………………………………………… 1-3
Cable lock slot ……………………………………………………………………………………………. 1-4
Setting up your monitor ……………………………………………………………………………………... 1-4
Connecting and turning on your monitor ………………………………………………………………… 1-4
Registering your option ……………………………………………………………………………………... 1-8
Chapter 2. Adusting and using your monitor …………………………………………..2-1
Comfort and accessibility …………………………………………………………………………………… 2-1
Arranging your work area ………………………………………………………………………………... 2-1
Quick tips for healthy work habits ……………………………………………………………………….. 2-2
Accessibility information ………………………………………………………………………………… 2-2
Adjusting your monitor image ……………………………………………………………………………… 2-3
Using the direct access controls ………………………………………………………………………….. 2-3
Using the On-Screen Display (OSD) controls …………………………………………………………… 2-3
Selecting a supported display mode ……………………………………………………………………….... 2-5
Understanding power management …………………………………………………………………………. 2-6
Caring for your monitor ………………………………………………………………………………………2-7
Detaching the monitor stand ………………………………………………………………………………… 2-7
Chapter 3. Reference information ………………………………………………..……..3-1
Monitor specifications ………………………………………………………………………………………..3-1
Troubleshooting ………………………………………………………………………………………………3-2
Manual Image setup ……………………………………………………………………………………….3-3
Manually installing the monitor driver …………………………………………………………………… 3-4
Service information ………………………………………………………………………………………..3-7
Appendix A. Service and Support …………………………………………..…………...A-1
Online technical support ………………………………………………………………………..……………. A-1
Telephone technical support ………………………………………………………………………..………... A-1
Worldwide telephone list …….…………………………………………………………………….……… A-1
Appendix B. Notices ………………………………………………………………….……B-1
Trademarks …………………………………………………………………………………………………… B-2
Copyright Lenovo 2008.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
3AFETY INFORMATION
ꢀŽ˜›Ž ’—œŠ••’— ‘’œ ™›˜žŒǰ ›ŽŠ ‘Ž ꢁŠŽ¢ ꢂ—˜›–Š’˜—ǯ
ꢃ—Žœ Ž ’—œŠ•Š› ŽœŽ ™›˜ž˜ǰ •Ž’Š Šœ ꢂ—˜›–Š³äŽœ Ž ꢁŽž›Š—³Šǯ
Prije instaliranja ovog proizvoda obavezno pročitajte sigurnosne upute.
0RED INSTALAC¤ TOHOTO PRODUKTU SI PRECTETE PR¤RUCKU BEZPECNOSTN¤CH INSTRUKC¤ꢀ
ꢄ®œ œ’””Ž›‘Žœ˜›œ”›’ĞŽ›—Žǰ è› ž ’—œŠ••Ž›Ž› ŽĴŽ ™›˜ž”ǯ
ꢅ——Ž— ”ž’— ŠœŽ——ŠĴ §–§— ž˜ĴŽŽ—ǰ •žŽ ž›ŸŠ˜‘“ŽŽ ”˜‘ŠœŠ ꢁŠŽ¢ ꢂ—˜›–Š’˜—ǯ
ꢃŸŠ— Ȃ’—œŠ••Ž› ŒŽ ™›˜ž’ǰ •’œŽ£ •Žœ Œ˜—œ’—Žœ Ž œ·Œž›’·ǯ
ꢆ˜› Ž› ꢂ—œŠ••Š’˜— ’ŽœŽœ ꢇ›˜ž”œ ’Ž ꢁ’Œ‘Ž›‘Ž’œ‘’— Ž’œŽ •ŽœŽ—ǯ
ꢇ›’–Š ’ ’—œŠ••Š›Ž šžŽœ˜ ™›˜˜Ĵ˜ǰ •ŽŽ›Ž •Ž ꢂ—˜›–Š£’˜—’ œž••Š ꢁ’Œž›Ž££Šǯ
ꢄŽŽœ Ÿ˜˜›Š ž ’ ™›˜žŒ ’—œŠ••ŽŽ› ŽŽ›œ Ž ŸŽ’•’‘Ž’œŸ˜˜›œŒ‘›’ĞŽ—ǯ
ꢄŽœ œ’””Ž›‘Žœ’—˜›–Šœ“˜—Ž— ǻꢁŠŽ¢ ꢂ—˜›–Š’˜—Ǽ è› ž ’—œŠ••Ž›Ž› ŽĴŽ ™›˜ž”Žǯ
ꢃ—Žœ Ž ’—œŠ•Š› ŽœŽ ™›˜ž˜ǰ •Ž’Š Šœ ꢂ—˜›–Š³äŽœ œ˜‹›Ž ꢁŽž›Š—³Šǯ
ꢃ—Žœ Ž ’—œŠ•Š› ŽœŽ ™›˜žŒ˜ •ŽŠ •Š ’—˜›–ŠŒ’à— Ž œŽž›’Šǯ
Måt tålfsifutjogpsnbujpofo joobo ev jotubmmfsbs efo iås qspevlufo/
sUmGanBt’manli¥tl¥n; muneBlcab;epIþmbBa©ÚlkmμviFI
Ț ꢈ˜™¢›’‘ ꢄŽ—˜Ÿ˜ ŘŖŖ8.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety and Maintenance Guidelines
Important Safety Information
The power cord is designed for use with your monitor. To use a different cord, use only a power source and
connection compatible with this monitor.
WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power
outlet. To reduce the risk of electric shock or damage to your equipment, do not diable the power cord grounding
feature. The grounding plug is an important safety feature.
WARNING: For your safety, be sure that the grounded power outlet you plug the power cord into is easily
accessible to the operator and located as close to the equipment as possible. To disconnect power from the
equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.
CAUTION: To protect your monitor, as well as your computer, connect all power cords for your computer and its
peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip with
surge protection or uninterruptible power supply (UPS).
Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use
a power strip whose manufacturer offers a damage replacement policy, so you can replace your equipment if surge
protection fails.
CAUTION: A certified power supply cord has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certified power supply cord not lighter
than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm²
or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be of synthetic rubber.
Safety Precautions
■ Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of
the monitor.
■
Be sure the total ampere rating of the products connected to the outlet dose not exceed the current rating of the
electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the
rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device.
Install your monitor near a power outlet that you can easily reach. Disconnect the monitor by grasping the plug
firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
■
■
Do not allow anything to rest on the power cord. Do not walk on the cord.
Maintenance Guidelines
To enhance the performance and extend the life of your monitor:
■
Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating
properly or has been dropped or damaged, contact your Hewlett-Packard authorized dealer, reseller, or service
provider.
■
■
Adjust only those controls that are described in the operating instructions.
Turn your monitor off when not in use. You can substantially increase the life expectancy of the monitor by using
a screen saver program and turning off the monitor when not in use.
■
■
Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture.
Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered.
Never push objects of any kind into cabinet slots or other openings.
■
■
■
Unplug the monitor from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Do not drop the monitor or place it on an unstable surface.
When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting
scratched, defaced, or broken.
Cleaning the Monitor
The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor, follow
these steps:
1. Turn off the computer and the monitor.
2. Unplug your monitor from the power outlet before cleaning.
CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or cabinet.
These chemicals may damage the monitor. Do not use liquid or aerosol cleaners. Never user water to clean an LCD
screen.
3. Wipe the screen with a dry, soft, clean cloth.
If the screen requires additional cleaning, use an antistatic screen cleaner.
4. Dust the monitor housing. Use a damp cloth to clean the cabinet.
If the cabinet requires additional cleaning, use a clean cloth dampened with isopropyl alcohol.
5. Plug in the monitor.
6. Turn on the monitor and the computer.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Interface Cable
Cable Wrapper
Cable Cover
Note: To attach a VESA mount, please see
“Detaching the monitor stand” on page 2-7.
Ț ꢀ˜™¢›’‘ ꢁŽ—˜Ÿ˜ ŘŖŖ8.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
This section will provide information on adjusting monitor positions, setting user
controls, and using the cable lock slot.
Types of adjustments
Tilt
Please see the illustration below for an example of the tilt range.
Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the most
comfortable viewing angle.
Height Adjustment
After pressing the top of the monitor, remove the fixed pin and adjust the height of
the monitor.
1-2 L1940p Wide Flat Panel Monitor User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Pivot
- Adjust height to the top position before rotation the monitor.
- Rotate clockwise until the monitor stops at 90°.
User controls
Your monitor has controls on the front which are used to adjust the display.
For information on how to use these controls, please see “Adjusting your monitor
image ” on page 2-3.
Chapter 1. Getting started 1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor
(in the lower right corner). Please follow the instructions that came with the cable
lock to attach it.
Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety Information located in the Monitor Safety,
Troubleshooting, and Warranty Guide before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer power
cord.
2. Connect the digital signal cable to the video port on the back of the computer.
Note: One end of the signal cable is already pre-attached to your monitor.
1-4 L1940p Wide Flat Panel Monitor User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect the analog signal cable to the D-SUB connector of the monitor and the
other end on the back of the computer.
4. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and/or equipment regulations shall be considered. A certified
power supply cord not lighter than ordinary polyvinyl chloride flexible cord
according to IEC 60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G
0.75mm²) shall be used. Alternative a flexible cord be of synthetic rubber according
to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.
Chapter 1. Getting started 1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Rotate the head of the monitor into portrait view.
6.
Place the cables through the Main Clip. Then fasten the clip.
7.
Wrap the Cable Wapper around the cables.
1-6 L1940p Wide Flat Panel Monitor User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Remove the four rubbers from the stand.
9. Replace the Cable Cover.
1
2
10. Power on the monitor and the computer.
Chapter 1. Getting started 1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
11. To install the monitor driver, insert the Reference and Driver CD, click Install
driver, and follow the on-screen instructions.
12. To optimize your monitor image, if using the analog cable, press the Automatic
Image Setup key. Automatic image setup requires that the monitor is warmed up for
at least 15 minutes. This is not required if you are using the DVI cable.
Note: If automatic image setup does not establish the image that you prefer, perform
manual image setup. See “Manual image setup” on page 3-3.
Registering your option
®
Thank you for purchasing this Lenovo product. Please take a few moments to
register your product and provide us with information that will help Lenovo to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing better
ways to communicate with you. Register your option on the following Web site:
Lenovo will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive further
information.
1-8 L1940p Wide Flat Panel Monitor User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
#HAPTER ꢀꢁ !DJUSTING AND USING YOUR MONITOR
ꢀ‘’œ œŽŒ’˜— ’•• ’ŸŽ ¢˜ž ’—˜›–Š’˜— ˜— Š“žœ’— Š— žœ’— ¢˜ž› –˜—’˜›ǯ
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal
computer and to avoid discomfort. Arrange your workplace and the equipment
you use to suit your individual needs and the kind of work that you perform. In
addition, use healthy work habits to maximize your performance and comfort
while using your computer.
For more detailed information on any of these topics, visit the Healthy Computing
Arranging your work area
Use a work surface of appropriate height and available working area to allow you
to work in comfort.
Organize you work area to match the way you use materials and equipment.
Keep your work area clean and clear for the materials that you typically use and
place the items that you use most frequently, such as the computer mouse or
telephone, within the easiest reach.
Equipment layout and setup play a large role in your working posture. The
following topics describe how to optimize equipment setup to achieve and
maintain good working posture.
Positioning and viewing your monitor
Position and adjust your computer monitor for comfortable viewing by considering
the following items:
●
Viewing distance: Optimal viewing distances for monitors range from
approximately 510mm to 760mm (20 in to 30 in) and can vary depending on
ambient light and time of day. You can achieve different viewing distances by
repositioning your monitor or by modifying your posture or chair position. Use
a viewing distance that is most comfortable for you.
●
Monitor height: Position the monitor so your head and neck are in a
comfortable and neutral (vertical, or upright) position. If your monitor does not
have height adjustments, you might have to place books or other sturdy objects
under the base of the monitor to achieve the desired height. A general guideline
is to position the monitor such that the top of the screen is at or slightly below
your eye-height when you are comfortably seated. However, be sure to optimize
your monitor height so the line of site between your eyes and the center the
monitor suits your preferences for visual distance and comfortable viewing
when your eye muscles are in a relaxed stated.
●
●
Tilt : Adjust the tilt of your monitor to optimize the appearance of the screen
content and to accommodate your preferred head and neck posture.
General location: Position your monitor to avoid glare or reflections on the
screen from overhead lighting or nearby windows.
The following are some other tips for comfortable viewing of your monitor:
ŘȬŗ
Ț ꢀ˜™¢›’‘ ꢁŽ—˜Ÿ˜ ŘŖŖ8.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
●
Use adequate lighting for the type of work you are performing.
Use the monitor brightness, contrast, and image adjustment controls, if
equipped, to optimize the image on your screen to meet your visual preferences.
Keep your monitor screen clean so you can focus on the screen’s contents.
●
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure
to periodically look away from your monitor screen and focus on a far object to
allow your eye muscles to relax. If you have questions on eye fatigue or visual
discomfort, consult a vision care specialist for advice.
Quick tips for healthy work habits
The following information is a summary of some important factors to consider to
help you remain comfortable and productive while you use your computer.
●
Good posture starts with equipment setup: The layout of your work area and
the setup of your computer equipment have a large effect on your posture while
using your computer. Be sure to optimize the position and orientation of your
equipment by following the tips outlined in “Arranging your work area ” on
page 2-1 so you can maintain a comfortable and productive posture. Also, be
sure to use the adjustment capabilities of your computer components and office
furniture to best suit your preferences now and as your preferences change over
time.
●
Minor changes in posture can help avoid discomfort: The longer you sit and
work you’re your computer, the more important it is to observe your working
posture. Avoid as summing any one posture for an extended period of time.
Periodically make minor modifications in your posture to help deter any
discomforts that might arise. Make use of any adjustments that your office
furniture or equipment provide to accommodate changes in posture
●
Short, periodic breaks help ensure healthy computing: Because computing is
primarily a static activity, it is particularly important to take short breaks from
your work. Periodically, stand up you’re your work area, stretch, walk for a drink
of water, or otherwise take a short break from using your computer. A short
break from work gives your body a welcome change in posture and helps to
ensure you remain comfortable and productive while you do work.
Accessibility information
Lenovo is committed to providing greater access to information and technology to
people with disabilities. With assistive technologies, users can access information in
the way most appropriate to their disability. Some of these technologies are already
provided in your operating system; others can be purchased through vendors or
accessed at:
L1940p Wide Flat Panel Monitor User’s Guide
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Note: The direct access controls are blue.
Table 2-1. Direct access controls
Icon
Control
Description
Input Change
Switches the video input source.
Image Setup
Brightness
Activates automatic image adjustment.
Direct access to Brightness adjustment.
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen
Display (OSD), as shown below.
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or to move among the icons. Select an icon and press
to access
that function. If there is a sub-menu, you can move between options using
or , then press to select that function. Use or to make adjustments.
Press
to save.
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
3. Press
4. Press and hold
adjustments to the OSD. Press and hold
and allow adjustments to the OSD.
for 10 seconds to unlock the OSD
5. Enables DDC/CI by default. Use OSD Exit Key,Press and hold the
for
buttons
10 seconds to disable / enable DDC/CI function. The words " DDC/CI Disable/DDC/
CI/Enable" shows on the screen.
Chapter 2. Adjusting and using your monitor 2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2-2. OSD functions
Controls and
Adjustments
(Analog)
Controls and
Adjustments
(Digital)
OSD Icon on Main
Menu
Submenu
Brightness
Contrast
Descirption
Same as Analog
Adjusts overall brightness
Brightness/
Contrast
Adjusts difference between
light and dark areas
Control Locked-
not required for
digital input
Moves the image left or
right.
Horizontal Position
Vertical Position
Image Position
Image Setup
Moves the image up or
down
Automatically optimizes the image.
Automatic
Manual
Manually optimizes the image. See “Manual image
setup” on page 3-3
●
●
●
Clock
Phase
Save
Adjusts intensity of red, green, and blue.
Preset mode
Same as A alog
n
Color
Image Properties
●
●
●
●
Reddish
sRGB
Neutral
Bluish
Custom
●
●
●
Red: Increases or decreases the saturation of
‘red’ in the image.
Green: Increases or decreases the saturation of
‘green’ in the image.
Blue: Increases or decreases the saturation of
‘blue’ in the image.
●
●
Save: Saves the custom color choices.
Off (Original AR)
Same Aspect Ratio with input signal.
Scaling
●
On (Full)
Expand image size to full screen.
L1940p Wide Flat Panel Monitor User’s Guide
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2-2. OSD functions
Controls and
Adjustments
(Analog)
Controls and
Adjustments
(Digital)
OSD Icon on Main
Menu
Submenu
Descirption
This monitor can accept video signals through two
different connectors. Most desktop computers use
a D-SUB connector. Select digital among OSD
Controls when you use DVI connector.
Same as Analog
Input Signal
- Selects D-SUB (Analog)
- Selects DVI-Digital
Shows resolution, refresh rate, and product details.
Same as Analog
Note: This screen does not allow any changes to the
settings.
Information
Options
This section lists the languages supported by your
monitor.
Menu Language
Note: The language chosen only affects the
language of the OSD. It has no effect on any
software running on the computer.
Menu position adjusts menu location on the
screen.
Same as Analog
Menu Position
Default
Returns the menu position to the default settings.
●
●
●
Horizontal: Changes the horizontal position of
the OSD
Vertical: Changes the vertical position of the
OSD.
Save
Custom
●
●
Cancel
Reset
Factory Default
Reset monitor to original settings.
Controls button and menu settings for accessibility
preferences.
Accessibility
Button repeat rate:
Select
or
to change.
●
Off
●
●
Default
Slow
Menu time out: Sets the length of time the
OSD will remain active after the last time a button
is pressed.
Exit the main menu
Same as Analog
Exit
Chapter 2. Adjusting and using your monitor 2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer
to your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and
the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is
currently configured to a display mode outside the range of this monitor, you may
need to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to 1440 x 900 at 60 Hz, which is the Native Resolution Display
mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
640x480
Refersh rate
60Hz, 66Hz, 72Hz, 75Hz
70Hz
720x400
800x600
60Hz, 72Hz, 75Hz
75Hz
832x624
1024x768
1152x864
1280x768
1280x960
1280x1024
1440x900
60Hz, 70Hz, 75Hz
60Hz, 75Hz
60Hz
60Hz
60Hz, 70Hz, 72Hz, 75Hz
60Hz, 75Hz
Understanding power management
Power management is invoked when the computer recognizes that you have not
used your mouse or keyboard for a user-definable period. There are several states
as described in the table below.
For optimal performance, switch off your monitor at the end of each working day,
or whenever you expect to leave it unused for long periods during the day.
Table 2-4. Power indicator
State
On
Standby/
Supsend
Power Indicator
Steady green
Steady amber
Screen
Normal
Blank
Restoring Operation
Compliance
Press a key or move the
mouse.
ENERGY STAR
There may be a slight delay
reappears.
Note: Standby also occurs
if there is no image output
to the monitor.
Off
Off
Off
Press a key or move the
mouse.
ENERGY STAR
There may be a slight delay
before the image reappears.
L1940p Wide Flat Panel Monitor User’s Guide
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Image rotation
Before rotating the monitor, you should set-up your computer to rotate the image.
Rotating the image may require special rotation software or you may find that your
computer is preloaded with video graphic drivers that allows image rotation. Check
the Graphic Properties setting on your computer to see if this feature is available.
Try these steps to check if image rotation is available on your computer.
1. Right-click on the desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have ATI, select the Rotation tab and set the preferred rotation. If you have
nVidia, click the nVidia tab, in the left-hand column select NVRotate, and then
select the preferred rotation. If you have Intel, select the Intel graphics tab, click
Graphic Properties, select the Rotation tab, and then set the preferred rotation.
Check with the manufacturer of your computer to see if graphic drivers with image
rotation can be downloaded from their support website.
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
●
●
●
Apply water or liquid directly to your monitor.
Use solvents or abrasives.
Use flammable cleaning materials to clean your monitor or any other electrical
equipment.
●
●
Touch the screen area of your monitor with sharp or abrasive items. This type of
contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area.
Do:
●
Lightly dampen a soft cloth with water and use this to gently wipe the covers
and the screen.
●
Remove grease or finger marks with a damp cloth and a little mild detergent.
Detaching the monitor stand
After placing the monitor face down on a clean surface or soft cloth, remove the four
screws from the stand to remove it from the monitor.
Chapter 2. Adjusting and using your monitor 2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
4424-Hxx
56.1
241.1
440 2
4 02
9.50
7 34
Tilt range
Swivel
Lift
Range: 0°/+30°
Stand
Range: -45°, +45°
Range: 110.0 mm
Pivot
Yes (clock wise 90 degree)
81.4
55 2
408 2
85
18.95
05
607
23
1
0.5
Input signal
AnalogDirectDrive, 75ohm0.7V
1440 pixels (max)
Horizontal addressability
Vertical addressability
Clock frequency
Video input (Analog)
Video input (Digital)
900 lines (max)
137MHz
Interface
DVI
Input Signal
VESA TMDS (Panel Link™)
Horizontal addressability
Vertical addressability
Clock frequency
1440 pixels (max)
900 lines (max)
137MHz
1
0
6
44
900
4
32
104
Ț ꢀ˜™¢›’‘ ꢁŽ—˜Ÿ˜ ŘŖŖ8.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-1. Monitor specifications for type-model 4424-Hxx(continued)
Humidity
Operating
Storage
10% to 80%
5% to 95%
5% to 95%
Shipping
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to
solve it yourself. Before calling your dealer or Lenovo, try the suggested actions
that are appropriate to your problem.
Table 3-2. Troubleshooting
Problem
Possible cause
Suggested action
Reference
The words ″Out The system is set
“Selecting a supported
display mode” on page
2-6
v If you are replacing an
old monitor, reconnect
it and adjust the
display mode to within
the specified range for
your new monitor.
of Range″ are
shown on the
screen, and the
to a display
mode which is
not supported by
power indicator the monitor.
is flashing green.
v If using a Windows
system, restart the
system in safe mode,
then select a supported
display mode for your
computer.
v If these options do not
work, contact the
Customer Support
Center.
The image
quality is
unnacceptable.
The video signal Be sure the signal cable is “Connecting and turning
cable is not
connected with
the monitor or
system
firmly plugged into the
system and monitor.
on your monitor” on
page 1-4
completely.
The color
settings may be
incorrect.
Select another color
setting from the OSD
menu.
“Adjusting your monitor
image” on page 2-3
The automatic
image setup
Perform automatic image “Adjusting your monitor
setup.
image” on page 2-3
function was not
performed.
The power
“Connecting and turning
on your monitor” on
page 1-4
v The monitor’s v Be sure the power cord
indictator is not
lit and there is
no image.
power switch
is not
is connected properly.
v Be sure the outlet has
switched on.
power.
v The power
cord is loose
or
v Power on the monitor.
v Try using another
power cord.
disconnected.
v Try using another
v There is no
power at the
outlet.
electrical outlet.
L1940p Wide Flat Panel Monitor User’s Guide
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-2. Troubleshooting (continued)
Problem
Possible cause
Suggested action
Reference
Screen is blank
and power
indicator is
steady amber or
flashing green
The monitor is in
Standby/Suspend
mode
“Understanding power
management” on page
2-6
v Press any key on the
keyboard or move the
mouse to restore
operation.
v Check the Power
Options settings on
your computer.
The power
indicator is
green, but there disconnected
The video signal Be sure the video cable is “Connecting and turning
cable is loose or connected with the
system properly.
on your monitor” on
page 1-4
is no image.
from the system
or monitor.
The monitor
brightness and
contrast are at
the lowest
Adjust the brightness and “Adjusting your monitor
contrast setting on the
OSD menu.
image” on page 2-3
setting.
One or more of
the pixels appear characteristic of
discolored
This is a
If there are more than
five pixels missing,
contact the Customer
Support Center.
Appendix A, “Service and
Support,” on page A-1
the LCD
technology and
is not an LCD
defect.
Adjust the resolution
settings on your system
to match the native
resolution for this
“Adjusting your monitor
image” on page 2-3
v Fuzzy lines in v Image setup
text or a
has not been
optimized
blurry image.
“Manual image setup”
v Horizontal or v Your system
1440 x 900
monitor:
Hz.
at 60
vertical lines
through the
image.
Display
Properties
setting have
not been
Perform automatic image “Selecting a supported
setup. If automatic image display mode” on page
setup does not help,
perform manual image
setup.
2-6
optimized.
When working in the
native resolution, you
may find additional
improvements by
See the Advanced section
of your system’s display
properties.
adjusting the Dots Per
Inch (DPI) setting on
your system.
Manual image setup
If automatic image setup does not establish the image that you prefer, perform
manual image setup.
Note: Have your monitor powered on for about 15 minutes, until the monitor
warms up.
1. Press
at the bottom of the monitor to open the OSD menu.
2. Use
or
or
to select
and press
to access.
to select Clock and Phase adjustment.
3. Use
Chapter 3. Reference information 3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
ǯ ꢀ•˜Œ” ǻ™’¡Ž• ›ŽšžŽ—Œ¢Ǽ Š“žœœ ‘Ž —ž–‹Ž› ˜ ™’¡Ž•œ œŒŠ——Ž ‹¢ ˜—Ž
‘˜›’£˜—Š• œ ŽŽ™ǯ ꢁf thŽ ›ŽšžŽ—Œ¢ ’œ —˜ Œ˜››ŽŒǰ ‘Ž œŒ›ŽŽ— œ‘˜ œ ŸŽ›’ŒŠ•
œ›’™Žœ Š— ‘Ž ™’Œž›Ž ˜Žœ —˜ ‘ŠŸŽ ‘Ž Œ˜››ŽŒ ’‘ǯ
ǯ ꢁ‘ŠœŽ Š“žœœ ‘Ž ™‘ŠœŽ ˜f t‘Ž ™’¡Ž• Œ•˜Œ” œ’—Š•ǯ ꢂ’‘ Š
›˜— ™‘ŠœŽ
Š“žœ–Ž—ǰ ‘Ž ™’Œž›Ž ‘Šœ ‘˜›’£˜—Š• ’œž›‹Š—ŒŽœ ’— •’‘ ™’Œž›Žǯ
ꢀꢁ ꢂ‘Ž— ‘Ž ’–ŠŽ —˜ •˜—Ž› •˜˜”œ ’œ˜›Žǰ œŠŸŽ ‘Ž ꢃ•˜Œ” Š— ꢄ‘ŠœŽ
Š“žœ–Ž—œǯ
ꢂꢁ ꢄ›Žœœ
˜ •ŽŠŸŽ ‘Ž ꢅꢆꢇ –Ž—žǯ
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows Vista,
Microsoft. Windows XP. and Microsoft Windows 2000 Professional.
Installing the monitor driver in Windows Vista
To install the device driver in Microsoft® Windows Vista, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows Vista.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
Vista operating system.
4. Open the Display Properties window by clicking Start, Control Panel
and then double-clicking the Hardware and Sound icon.
5. Click the Personalization icon.
6. Click the Display Settings icon.
7. Click the Advanced Settings button.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on Update Driver
and then click the "Browse my computer for driver sfotware" button.
12. Select “Let me pick from a list of device drivers on my computer” and then click the Next button.
13. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button.
14. Ensure that the CD drive letter is selected, and then click OK.
the CD to your hard disk drive.
15. Select L1940pwD and click Next. The files will be copied from
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo
recommends using either 1440 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
L1940p Wide Flat Panel Monitor User’s Guide
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the monitor driver in Windows XP
To use the Plug and Play feature in Windows XP, files should be loaded from the
Reference and Driver CD.
Note: This section must be completed before continuing with the Windows XP
automatic image setup.
1. Turn off the computer and all a�ached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into
Windows XP.
4. Open the Display Properties window by clicking Start Se�ings Control
Panel, and then double-clicking the Display icon.
5. Click the Se�ings tab.
6. Click the Advanced bu�on.
7. Click the Monitor tab.
8. Click the Properties bu�on.
9. Click the Drivers tab.
10. Open the Hardware Update Wizard window by clicking on Update Driver,
and then click Next.
11. Select Install from a list or Specific location(Advanced), and then click Next.
12. Insert the Setup CD into the CD drive, then click the Have Disk bu�on.
13. Click OK.
14. Ensure that the CD drive le�er is selected.
15. Choose L1940pwD and click OK. The files will be copied
from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve
display quality. Lenovo recommends using either 1440 x900 at a refresh rate of 60
Hz, or 640 x 480 at a refresh rate of 60 Hz.
Chapter 3. Reference information 3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the monitor driver in Windows 2000
To use the Plug and Play feature in Windows 2000, files should be loaded from the
Reference and Driver CD.
ꢂ˜ŽDZ ꢀ‘’œ œŽŒ’˜— –žœ ‹Ž Œ˜–™•ŽŽ ‹Ž˜›Ž Œ˜—’—ž’— ’‘ ‘Ž ꢂ’—˜ œ ŘŖŖŖ
Šž˜–Š’Œ ’–ŠŽ œŽž™ǯ
ꢀꢁ ꢀž›— ˜ğ‘Ž Œ˜–™žŽ› Š— Š•• ŠĴŠŒ‘Ž ŽŸ’ŒŽœǯ
ꢂꢁ ꢈ—œž›Ž ‘ŠĴ ‘Ž –˜—’˜› ’œ Œ˜——ŽŒŽ Œ˜››ŽŒ•¢ǯ
ꢃꢁ ꢀž›— ˜— ‘Ž –˜—’˜› Š— ‘Ž— ‘Ž œ¢œŽ– ž—’ǯ ꢉ••˜ ‘Ž œ¢œŽ– ˜ ‹˜˜ ’—˜
ꢂ’—˜ œ ŘŖŖŖǯ
ꢄꢁ ꢅ™Ž— ‘Ž ꢃ’œ™•Š¢ ꢁ›˜™Ž›’Žœ ’—˜ ‹¢ Œ•’Œ”’— ꢄŠ› ꢄŽĴ’—œ ꢀ˜—›˜•
.
.
ꢄŠ—Ž•ǰ Š— ‘Ž— ˜ž‹•ŽȬŒ•’Œ”’— ‘Ž ꢃ’œ™•Š¢ ’Œ˜—ǯ
ꢅꢁ ꢃ•’Œ” ‘Ž ꢄŽĴ’—œ Š‹ǯ
ꢆꢁ ꢃ•’Œ” ‘Ž ꢅŸŠ—ŒŽ ‹žĴ˜—ǯ
ꢇꢁ ꢃ•’Œ” ‘Ž ꢆ˜—’˜› Š‹ǯ
ꢈꢁ ꢃ•’Œ” ‘Ž ꢁ›˜™Ž›’Žœ ‹žĴ˜—ǯ
ꢉꢁ ꢃ•’Œ” ‘Ž ꢃ›’ŸŽ›œ Š‹ǯ
ꢀꢊꢁ ꢅ™Ž— ‘Ž ꢇ™›ŠŽ ꢃŽŸ’ŒŽ ꢃ›’ŸŽ› ꢈ’£Š› ’—˜ ‹¢ Œ•’Œ”’— ˜— ꢇ™ŠŽ
ꢃ›’ŸŽ›ǰ Š— ‘Ž— Œ•’Œ” ꢂŽ¡ǯ
ꢀꢀꢁ ꢆŽ•ŽŒ ꢃ’œ™•Š¢ Š •’œ ˜Ğ ‘Ž ”—˜ — ›’ŸŽ›œ ˜› ‘’œ ŽŸ’ŒŽ œ˜ ‘Š ꢉ ŒŠ—
Œ‘˜˜œŽ Š œ™ŽŒ’ęŒ ›’ŸŽ›ǰ Š— ‘Ž— Œ•’Œ” ꢂŽ¡ǯ
ꢀꢂꢁ ꢁ—œŽ›Ĵ ‘Ž ꢆŽž™ ꢃꢇ ’—˜ ‘Ž ꢃꢇ ›’ŸŽǰ ‘Ž— Œ•’Œ” ‘Ž ꢊŠŸŽ ꢃ’œ” ‹žĴ˜—ǯ
ꢀꢃꢁ ꢃ•’Œ” ꢋꢌǯ
ꢀꢄꢁ ꢈ—œž›Ž ‘ŠĴ ‘Ž ꢃꢇ ›’ŸŽ •ŽĴŽ› ’œ œŽ•ŽŒŽǯ
ꢀꢅꢁ ꢃ‘˜˜œŽ ꢍŗ940pwD Š— Œ•’Œ” ꢋꢌǯ ꢀ‘Ž ę•Žœ ’•• ‹Ž Œ˜™’Žȱȱ›˜–ȱ‘Žȱꢃꢇȱ˜
¢˜ž› ‘Š› ’œ” ›’ŸŽǯ
ꢀꢆꢁ ꢃ•˜œŽ Š•• ˜™Ž— ’—˜ œ Š— ›Ž–˜ŸŽ ‘Ž ꢃꢇǯ
ꢀꢇꢁ ꢊŽœŠ›Ĵ ‘Ž œ¢œŽ–ǯ ꢀ‘Ž œ¢œŽ– ’•• Šž˜–Š’ŒŠ••¢ œŽ•ŽŒĴ ‘Ž –Š¡’–ž– ›Ž›Žœ‘
›ŠŽ Š— Œ˜››Žœ™˜—’— ꢃ˜•˜› ꢋŠŒ‘’— ꢄ›˜ę•Žœǯ
ꢂ˜ŽDZ ꢅ— ꢌꢃꢇ –˜—’˜›œǰ ž—•’”Ž ꢃꢊꢀœǰ Š ŠœŽ› ›Ž›Žœ‘ ›ŠŽ ˜Žœ —˜ ’–™›˜ŸŽ
’œ™•Š¢ šžŠ•’¢ǯ ꢌŽ—˜Ÿ˜ ›ŽŒ˜––Ž—œ žœ’— Ž’‘Ž› ŗ44Ŗ ¡900 Š Š ›Ž›Žœ‘ ›ŠŽ ˜ ŜŖ
ꢍ£ǰ ˜› ŜŚŖ ¡ ŚŞŖ Š Š ›Ž›Žœ‘ ›ŠŽ ˜ ŜŖ ꢍ£ǯ
'ETTING FURTHER HELP
ꢁ ¢˜ž œ’•• ŒŠ—Ȃ œ˜•ŸŽ ¢˜ž› ™›˜‹•Ž–ǰ ™•ŽŠœŽ Œ˜—ŠŒĴ ‘Ž ꢃžœ˜–Ž› ꢆž™™˜› ꢃŽ—Ž›ǯ
ꢎ˜› –˜›Ž ’—˜›–Š’˜— ˜— Œ˜—ŠŒ’— ‘Ž ꢃžœ˜–Ž› ꢆž™™˜› ꢃŽ—Ž›ǰ ™•ŽŠœŽ œŽŽ
ꢉ™™Ž—’¡ ꢉǰ ȃꢆŽ›Ÿ’ŒŽ Š— ꢆž™™˜›ǰȄ ˜— ™ŠŽ ꢉȬŗǯ
L1940p Wide Flat Panel Monitor User’s Guide
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Service information
Product numbers
The product number for your monitor is located on the side of the display bezel as
shown below.
Customer responsibilities
The warranty does not apply to a product which has been damaged due to
accident, misuse, abuse, improper installation, usage not in accordance with
product specifications and instructions, natural or personal disaster, or
unauthorized alterations, repairs or modifications.
The following are examples of misuse or abuse and not covered by warranty:
●
Images burned on to the screen of a CRT monitor. Burned image is preventable
by utilizing a moving screen saver or power management.
Physical damage to covers, bezel, base and cables.
●
●
Scratches or punctures on monitor screens.
Chapter 3. Reference information 3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
4424-Hxx
Business
45J7674
45J7675
45J7676
L1940p FRU monitor
4424-HB6
Black
L1940p FRU Stand
assembled with base
Business
Black
4424-HB6
L1940p FRU Signal cable
(Analog, 1.8m)
Business
Black
4424-HB6
L1940p FRU Signal cable
(Digital, 1.8m)
Business
Black
45J7677
4424-HB6
L1940p Wide Flat Panel Monitor User’s Guide
3-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. Service and Support
The following information describes the technical support that is available for your
Product, during the warranty period or throughout the life of the product. Refer to
your Lenovo Statement of Limited Warranty for a fully explanation of Lenovo
warranty terms.
Online technical support
Online technical support is available during the life of your product through the
During the warranty period, assistance for replacement or exchange of defective
components is available. In addition, if your option is installed in a Lenovo
computer, you might be entitled to service at your location. Your technical support
representative can help you determine the best alternative.
Telephone technical support
Installation and configuration support through the Customer Support Center will
be withdrawn or made available for a fee, at Lenovo’s discretion, 90 days after the
option has been withdrawn from marketing, Additional support offerings,
including step-by-step installation assistance, are available for a nominal fee.
To assist the technical support representative, have available as much of the
following information as possible:
●
●
●
●
●
●
●
Option name
Option number
Proof of purchase
Computer manufacturer, model, serial number, and manual
Exact wording of the error message (if any)
Description of the problem
Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative might want
to walk you through the problem during the call.
Worldwide telephone list
Phone numbers are subject to change without notice. For the most current phone
list.
Ț ꢀ˜™¢›’‘ ꢁŽ—˜Ÿ˜ ŘŖŖ8.
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Africa
Telephone Number
Africa: +44 (0)1475-555-055 South Africa: +27-11-3028888 and 0800110756
Central Africa: Contact the nearest Lenovo service provider
Argentina
Australia
Austria
0800-288-5366 (Spanish)
131-426 (English)
Up and running support: 01-24592-5901 Warranty service and support: 01-
211-454-610 (German)
Belgium
Up and running support: 02-210-9820 (Dutch) Up and running support: 02-
210-9800 (French) Warranty service and support: 02-225-3611 (Dutch, French)
Bolivia
Brazil
0800-0189 (Spanish)
Sao Paulo region: (11) 3889-8986 Outside Sao Paulo region: 0800-701-4815
(Brazilian Portuguese)
Canada
Chile
Toronto: 416-383-3344 Outside Toronto: 1-800-565-3344 (English, French)
Toll Free: 1230-020-1130 (Spanish)
China
800-810-1818 ext 5070 8610 84981188 ext 5070 (Mandarin)
China (Hong Kong S.A.R.)
Home computer: 852-2825-7799 Commercial computer: 852-8205-0333
ThinkPad and WorkPad: 852-2825-6580 (Cantonese, English, Mandarin)
Colombia
Costa Rica
Croatia
01-800-952-0466 (Spanish)
800-011-1029 (Spanish)
0800-0426
Cyprus
+357-22-841100
Czech Republic
Denmark
+420-2-7213-1316
Up and running support: 4520-8200 Warranty service and support: 7010-5150
(Danish)
Dominican Republic
Ecuador
Toll Free: 1-866-434-2080 (Spanish)
1-800-426911 (Spanish)
800-6264 (Spanish)
El Salvador
Estonia
+386-61-1796-699
Finland
Up and running support: 09-459-6960 Warranty service and support: +358-
800-1-4260 (Finnish)
France
Up and running support: 0238-557-450 Warranty service and support
(hardware): 0810-631-213 Warranty service and support (software): 0810-631-
020 (French)
Germany
Up and running support: 07032-15-49201 Warranty service and support:
01805-25-35-58 (German)
Greece
+30-210-680-1700
Guatemala
1800-624-0051 (Spanish)
Honduras
Hungary
Tegucigalpa: 232-4222 San Pedro Sula: 552-2234 (Spanish)
+36-1-382-5720
India
1800-425-6666 +91-80-2678-8970 (English)
Indonesia
Ireland
800-140-3555 (English) 62-21-251-2955 (Bahasa, Indonesian)
Up and running support: 01-815-9202 Warranty service and support: 01-881-
1444 (English)
L1940p Wide Flat Panel Monitor User’s Guide
A-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. Service and Support A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Turkey
Telephone Number
00800-4463-2041 (Turkish)
United Kingdom
Up and running support: 01475-555-055 Warranty support: 08705-500-900
(English)
United States
Uruguay
1-800-426-7378 (English)
000-411-005-6649 (Spanish)
0-800-100-5722 (Spanish)
Venezuela
Vietnam
For northern area and Hanoi: 84-4-843-6675 For southern area and Ho Chi
Minh City: 84-8-829-5160 (English, Vietnamese)
A-4 L1940p Wide Flat Panel Monitor User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any
Lenovo intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any other product, program,
or service.
Lenovo may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries , in writing, to:
Lenovo (United States), Inc.
500 Park Offices Drive, Hwy. 54
Research Triangle Park, NC 27709
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFERINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
jurisdictions do not allow disclaimer of express or implied warranties in certain
transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. Lenovo may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation
or other life support applications where malfunction may result in injury or death
to persons. The information contained in this document does not affect or change
Lenovo product specifications or warranties. Nothing in this document shall
operate as an express or implied license or indemnity under the intellectual
property rights of Lenovo or third parties. All information contained in this
document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this Lenovo
product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled
environment. Therefore. The result obtained in other operating environments may
ꢎȬŗ
Ț ꢀ˜™¢›’‘ ꢁŽ—˜Ÿ˜ ŘŖŖ8.
Download from Www.Somanuals.com. All Manuals Search And Download.
vary significantly. Some measurement may have been made on development-level
systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been
estimated through extrapolation. Actual results may vary. Users of this document
should verify the applicable data for their specific environment.
Trademarks
The following terms are trademarks of Lenovo in the United States, other
countries, or both:
Lenovo
ThinkCentre
ThinkPad
ENERGY STAR and the ENERGY STAR logo are registered US trademarks.
Microsoft, Windows, and Windows NT are trademarks of MicrosoftCorporation
in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
L1940p Wide Flat Panel Monitor User’s Guide
ꢎȬŘ
Download from Www.Somanuals.com. All Manuals Search And Download.
|