LT2013p Wide Flat Panel Monitor
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
General Safety guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
Shipping contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Notice for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Types of adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Height Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Monitor Pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Monitor controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Cable lock slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Setting up your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Connecting and turning on your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Registering your option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
Chapter 2. Adjusting and using your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
Comfort and accessibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Arranging your work area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Positioning your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Quick tips for healthy work habits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Accessibility information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Adjusting your monitor image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Using the direct access controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Using the On-Screen Display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Selecting a supported display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Image rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Understanding power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10
Detaching the monitor base and stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Chapter 3. Reference information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
Monitor specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Manual image setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Manually installing the monitor driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Installing the monitor driver in Windows 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Installing the monitor driver in Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Installing the monitor driver in Windows 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Getting further help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Customer responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Service parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Appendix A. Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Registering your option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Online technical support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Telephone technical support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Appendix B. Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Getting started
This User’s Guide provides detailed operation instructions for the user. For quick instruction
overview, please see the Setup Poster for brief information.
Shipping contents
The product package should include the following items:
•
Setup Poster
•
•
•
•
•
Reference and Driver CD
Flat Panel Monitor
Power Cord
USB 2.0 Cable
Analog Cable(for VGA use)
Chapter 1.
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice for use
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be
damaged by rough handling or excessive pressure.
1. Place your monitor with the screen face down on a soft flat surface.
2. Align the stand assembly bracket to the monitor.
3. Insert the bracket towards monitor until it locks in place.
Chapter 1.
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
This section will provide information on adjusting monitor positions, setting user controls, and
using the cable lock slot.
Types of adjustments
Tilt
Please see the illustration below for an example of the tilt range.
0°
Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable
viewing angle.
R
ꢁꢂR
ꢃ
ꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃ
ꢀꢁꢂ
Chapter 1.
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Height Adjustment
For height adjustment, user needs to press down or lift up the monitor.
ꢄꢄꢅPP
Monitor Pivot
- Adjust the screen position before rotating the monitor screen. (Make sure that the monitor
screen ascent to its highest point, and it inclines backward at 30°.)
- then rotate clockwise until the monitor stops at 90°.
Chapter 1.
1-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your monitor
This section provides information on how to set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety information on page iii before carrying out this procedure.
1. Power off your computer and all attached devices, then unplug the computer power cord.
2. Connect the cables according to below icon indication.
3. Connect one end of the DP cable to the DP connector on the back of the computer, and the
other end to the DP connector on the monitor. Lenovo recommends that customers who
require to use the Display Port input on their monitor purchase the "Lenovo Display Port
to Display Port cable 0A36537".
Chapter 1.
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect one end of the HDMI cable to the monitor HDMI port and the other end to the
computer if it has HDMI output terminal.
5. Connect one end of the analog signal cable to the monitor VGA (Analog) connector and
the other end to the computer.
Chapter 1.
1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from
Display Port, or HDMI.
Note: The audio output in HDMI/DP modes.
7. Connect one end of the USB cable to the USB upstream terminal on the back of the
monitor, and connect the other end of the USB cable to an appropriate USB port on your
computer.
Note: The USB port will stay in function as long as the monitor is connected to power,
regardless of whether the monitor is switched on or off.
Chapter 1.
1-8
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Connect one end of the USB cable to the USB upstream terminal on the side of the
monitor, and connect the other end of the USB cable to an appropriate USB port on your
device.
9. Isnsert the power cord into the monitor, then plug the monitor power cord and the
computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to
IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 ) shall be
used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm2 ) shall be used.
Chapter 1.
1-9
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Assembled Line Cleaner as shown below.
11. Power on the monitor and the computer.
Chapter 1.
1-10
Download from Www.Somanuals.com. All Manuals Search And Download.
12. To initiate the monitor driver, insert the Reference and Driver CD, click Install driver, and
follow the on-screen instructions.
Registering your option
Thank you for purchasing this Lenovo™ product. Please take a few moments to
register your Product and provide us with information that will help Lenovo to better
serve you in the future. Your feedback is valuable to us in developing product and
services that are important to you, as well as in developing better ways to
communicate with you. Register your option on the following Web site:
Lenovo will send you information and updates on your registered product unless you
indicate on the Web site questionnaire that you do not want to receive further
information.
Chapter 1.
1-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Adjusting and using your monitor
This section will give you information on adjusting and using your monitor.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer and to
avoid discomfort. Arrange your workplace and the equipment you use to suit your individual
needs and the kind of work that you perform. In addition, use healthy work habits to maximize
your performance and comfort while using your computer. For more detailed information on
any of these topics, visit the Healthy Computing Web site at:
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to work in
comfort.
Organize your work area to match the way you use materials and equipment. Keep your work
area clean and clear for the materials that you typically use and place the items that you use
most frequently, such as the computer mouse or telephone, within the easiest reach.
Equipment layout and setup play a large role in your working posture. The following topics
describe how to optimize equipment setup to achieve and maintain good working posture.
Positioning your monitor
Position and adjust your computer monitor for comfortable viewing by considering the
following items:
•
Viewing distance: Optimal viewing distances for monitors range from approximately
510 mm to 760 mm (20 in to 30 in) and can vary depending on ambient light and time of
day. You can achieve different viewing distances by repositioning your monitor or by
modifying your posture or chair position. Use a viewing distance that is most comfortable
for you.
•
Monitor height: Position the monitor so your head and neck are in a comfortable and
neutral (vertical, or upright) position. If your monitor does not have height adjustments,
you might have to place books or other sturdy objects under the base of the monitor to
achieve the desired height. A general guideline is to position the monitor such that the top
of the screen is at or slightly below your eye-height when you are comfortably seated.
However, be sure to optimize your monitor height so the line of site between your eyes
and the center the monitor suits your preferences for visual distance and comfortable
viewing when your eye muscles are in a relaxed state.
•
•
Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and
to accommodate your preferred head and neck posture.
General location: Position your monitor to avoid glare or reflections on the screen from
overhead lighting or nearby windows.
Chapter 2.
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
The following are some other tips for comfortable viewing of your monitor:
•
•
Use adequate lighting for the type of work you are performing.
Use the monitor brightness, contrast controls, if equipped to optimize the image on your
screen to meet your visual preferences.
•
Keep your monitor screen clean so you can focus on the screen’s contents.
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to
periodically look away from your monitor screen and focus on a far object to allow your eye
muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision
care specialist for advice.
Quick tips for healthy work habits
The following information is a summary of some important factors to consider to help you
remain comfortable and productive while you use your computer.
•
Good posture starts with equipment setup: The layout of your work area and the setup
of your computer equipment have a large effect on your posture while using your
computer. Be sure to optimize the position and orientation of your equipment by following
comfortable and productive posture. Also, be sure to use the adjustment capabilities of
your computer components and office furniture to best suit your preferences now and as
your preferences change over time.
•
•
Minor changes in posture can help avoid discomfort: The longer you sit and work with
your computer, the more important it is to observe your working posture. Avoid assuming
any one posture for an extended period of time. Periodically make minor modifications in
your posture to help deter any discomforts that might arise. Make use of any adjustments
that your office furniture or equipment provide to accommodate changes in posture.
Short, periodic breaks help ensure healthy computing: Because computing is primarily
a static activity, it is particularly important to take short breaks from your work.
Periodically, stand up from your work area, stretch, walk for a drink of water, or otherwise
take a short break from using your computer. A short break from work gives your body a
welcome change in posture and helps to ensure you remain comfortable and productive
while you do work.
Accessibility information
Lenovo is committed to providing greater access to information and technology to
people with disabilities. With assistive technologies, users can access information in
the way most appropriate to their disability. Some of these technologies are already
provided in your operating system; others can be purchased through vendors or
accessed at:
Chapter 2.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On-Screen Display (OSD) is not displayed.
Icon
Control
Input Source
Description
Switches the video input source
Shift back to previous level when in OSD mode
1
2
Press and hold for 10 seconds to enable or disable the
DDC-CI function
DDC-CI
Exit
Exit and return to previous level
Optimizes image (size, position, phase and clock) (For
analog [VGA] source only)
Auto Adjustment
Left browsing key
Decrease/Down
Brightness
For decreasing the value on adjustment bar/tune in
Press to move to previous item
Direct access to Brightness adjustment
Right browsing key
3
Increase/Up
For increasing the value on adjustment bar/tune in
Press to move to next item
To access OSD menu
Press to confirm selection
Menu
Enter
Press and hold for 10 seconds will lock menu/un-lock
menu
4
Press to enter next level on main menu/sub menu status
or enter previous level on adjustment bar
Chapter 2.
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Brightness / Contrast / DCR
To use the controls:
1. Press
2. Use
to open the main OSD menu.
or
to move among the icons. Select an icon and press
to access the selected
or , then
to make adjustments then press to save.
function. If there is a sub-menu, you can move between options using
press
to select that function. Use
or
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
adjustments to the OSD.
for 10 seconds to unlock the OSD and allow
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold
for 10 seconds to
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
Chapter 2.
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2-1. OSD functions
OSD Icon on Main
Controls and
Adjustments
Submenu
Description
Menu
Adjusts overall screen
brightness.
All input ports
Brightness
Contrast
Brightness/
Contrast/DCR
Adjusts difference between light
and dark areas.
Enable dynamic contrast ratio.
Moves image left or right.
Moves image up or down.
DCR
Analog(VGA) only
Horizontal Position
Vertical Position
Automatic
Image Position
Image Setup
Optimizes image (size, position,
phase and clock).
Manually optimizes image. See
Manual
•
•
•
Clock
Phase
Save
Chapter 2.
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2-1. OSD functions
OSD Icon on Main
Controls and
Adjustments
Submenu
Description
Menu
Adjusts intensity of red, green,
and blue.
All input ports
Color
Image Properties
Preset mode
•
•
•
•
Neutral
sRGB
Reddish
Bluish
Custom
•
•
•
•
Red: Increases or decreases
the saturation of Red in the
image.
Green: Increases or
decreases the saturation of
Green in the image.
Blue: Increases or decreases
the saturation of Blue in the
image.
Save: Saves the custom
color choices.
This monitor can accept video
signals through three different
connectors. Most desktop
computers use a analog
All input ports
Input Signal
connector. Select digital among
OSD Controls when you use DP
/ HDMI connector.
- Select 1- Analog (VGA)
- Select 2-HDMI (digital)
- Select 3-DP (digital)
Selects type of scaled image.
Off(1:1)
Scaling
Same Aspect Ratio with input
signal.
On(Expand)
Expand image to full screen.
Shows resolution, refresh rate,
and product details.
All input ports
Information
Note: This screen offers
information only, and (does) not
allow for setting changes.
Options
Chapter 2.
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2-1. OSD functions
OSD Icon on Main
Controls and
Adjustments
Submenu
Description
Menu
Changes languages of menu.
All input ports
Note: The selected language
only affects the language of the
OSD. It has no effect on any
software running on the
computer.
Menu Language
Options
Adjusts menu location.
Default
Menu Position
The menu position to the default
settings.
Custom
•
•
•
Horizontal: Changes the
horizontal position of the
OSD.
Vertical: Changes the
vertical position of the
OSD.
Save: Save the custom
position choices.
Reset all settings to the default
settings.
Factory default
Accessibility
•
•
Cancel
Reset
Changes button repeat rate and
menu time-out settings.
Button repeat rate
•
•
•
Off
Default
Slow
Menu time out
Set the duration of time that the
OSD will remain active when no
operation is performed(
).
Exit from menu.
Exit
Chapter 2.
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a supported display mode
The display mode of the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation on how to change display modes.
The image size, position and shape might be changed when the display mode changes. This is
normal and the image can be re-adjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor
temporarily until you have re-configured the system; preferably to 1600 x 900 at 60 Hz, which
is a common display mode.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
Timing
Refresh rate(Hz)
PAL
50 Hz
70 Hz
60 Hz
72 Hz
75 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
60 Hz
60 Hz
75 Hz
60 Hz
60 Hz
50 Hz
50 Hz
640x350
640x480
640x480
640x480
720x400
800x600
800x600
800x600
800x600
832x624
1024x768
1024x768
1024x768
1152x864
1280x1024
1280x1024
1280x1024
1366x768
1440x900
1600x900
1600x900
480p(640x480)
480p(720x480)
576p(720x576)
720p(1280x720)
Chapter 2.
2-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2-2. Factory set display modes
Timing
Refresh rate(Hz)
720p(1280x720)
60 Hz
Image rotation
Before rotating the monitor, you should set-up your computer to rotate the image.
Rotating the image may require special rotation software or you may find that your
computer is preloaded with video graphic drivers that allows image rotation. Check
the Graphic Properties setting on your computer to see if this feature is available.
Try these steps to check if image rotation is available on your computer.
1. Right-click on the desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have ATI, select the Rotation tab and set the preferred rotation. If you have
nVidia, click the nVidia tab, in the left-hand column select NV Rotate, and then
select the preferred rotation. If you have Intel, select the Intel graphics tab, click
Graphic Properties, select the Rotation tab, and then set the preferred rotation.
Check with the manufacturer of your computer to see if graphic drivers with image
rotation can be downloaded from their support website.
Chapter 2.
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding power management
Power management is invoked when the computer recognizes that you have not used your
mouse or keyboard for a user-definable period. There are several states as described in the
table below.
For optimal performance, switch off your monitor at the end of each working day, or whenever
you expect to leave it unused for long periods during the day.
Table 2-3. Power indicator
Restoring
Operation
State
Power Indicator
Screen
Compliance
On
Standby/Suspend
Green
Normal
Blank
Amber
Press a key or
ENERGY STAR
move the mouse
There may be a
slight delay before
the image
reappears.
Note: Standby
also occurs if there
is no image output
to the monitor.
Off
Off
Blank
Press the power
button
ENERGY STAR
There may be a
slight delay before
the image
reappears.
Chapter 2.
2-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
•
•
•
•
Apply water or liquid directly to your monitor.
Use solvents or abrasives.
Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Touch the screen area of your monitor with sharp or abrasive items. This type of contact
may cause permanent damage to your screen.
•
Use any cleaner which contains an anti-static solution or similar additives. This may harm
the coating of the screen area.
Do:
•
Lightly dampen a soft cloth with water and use this to gently wipe the covers and the
screen.
•
Remove grease or finger marks with a damp cloth and a little mild detergent.
Detaching the monitor base and stand
Step 1: Place the monitor on a soft and flat surface.
Step 2: Remove the screws from base before detaching base and stand from the monitor.
Wall Mounting (Optional)
Refer to the instructions that come with the base mounting kit. To convert your LCD display
from a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Chapter 2.
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit
(100mm x100mm distance), the type of VESA mounting screw is M4 x 10 mm.
VESA hole
Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting
kit.
For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg
Chapter 2.
2-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Reference information
This section contains monitor specifications, instructions to manually install the monitor
driver, troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications for type-model 60A0-MAR1-WW
Dimensions
Depth
221.6 mm (8.72 in.)
336.5 mm (13.25 in.)
Height
Width
467 mm (18.39 in.)
Stand
Tilt
Range: -5° ~ 30°
VESA mount
Image
Supported
Viewable image size
100 mm x 100 mm (3.94 in. x 3.94 in.)
494.03 mm (19.45 in.)
Maximum height
Maximum width
239.76 mm (9.44 in.)
432.0 mm (17.0 in.)
Pixel pitch
0.27 mm (0.01 in.)
Power input
Supply voltage
90-264 V AC (100-240 V AC +/-10%)
Max supply current
1.5 A
-
Power consumption
Normal operation
Standby/Suspend
Off
<17W
Note: Power consumption
figures are for the monitor and
the power supply combined
<1W (Analog), <1W (Digital)
<0.5W at 100VAC and 240VAC
Note: without USB/
Webcam/external
speaker
Video input (Analog)
Interface
VGA
Input signal
Analog Direct Drive, 75 ohm 0.7V
Horizontal
addressability
1600 pixels (max)
--
Vertical addressability
Clock frequency
900 lines (max)
205 MHz
Chapter 3.
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-1. Monitor specifications for type-model 60A0-MAR1-WW
Video input DP (Digital)
Interface
DP
Input signal
VESA TMDS (Panel Link™)/DP
Horizontal
addressability
1600 pixels (max)
--
Vertical addressability
900 lines (max)
Clock frequency
Interface
205 MHz
HDMI
Video input HDMI (Digital)
Input signal
VESA TMDS (Panel Link™)/HDMI
Horizontal
addressability
1600 pixels (max)
--
Vertical addressability
900 lines (max)
225 MHz
Clock frequency
VESA DDC/CI
Communications
Supported display modes
Horizontal frequency
30 KHz - 83 KHz
Vertical frequency
Native Resolution
Operating
50 Hz - 75 Hz
1600 x 900 at 60 Hz
0° to 45° C (32° to 113° F)
Temperature
Humidity
Storage
-20° to 60° C (-4° to 140° F)
Shipping
-20° to 60° C (-4° to 140° F)
10% to 80% non-condensing
Operating
Storage
5% to 95% non-condensing
5% to 95% non-condensing
Shipping
Chapter 3.
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve it yourself.
Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your
problem.
Table 3-2. Troubleshooting
Problem
Possible cause
Suggested action
Reference
The words "Out of The system is set to a
Range" are shown display mode which is
on the screen, and not supported by the
If you are replacing an old
monitor, reconnect it and
adjust the display mode to
within the specified range
for your new monitor.
"Selecting a supported
display mode"on page
the power
monitor.
indicator is
flashing green.
If using a Windows system,
restart the system in safe
mode, then select a
supported display mode for
your computer.
If these options do not work,
contact the Support Center.
The image quality The video signal cable
Be sure the signal cable is
firmly plugged into the
system and monitor.
"Connecting and
turning on your
is unacceptable.
is not connected with
the monitor or system
completely.
The color settings may
be incorrect.
Select another color setting "Adjusting your
from the OSD menu.
monitor image"on page
The automatic image
setup function was not
performed.
Perform automatic image
setup.
"Adjusting your
monitor image"on page
The power
•
•
•
The monitor’s
power switch is not
switched on.
•
•
Be sure the power cord "Connecting and
indicator is not lit
and there is no
image.
is connected properly.
turning on your
Be sure the outlet has
power.
The power cord is
loose or
disconnected.
•
•
Power on the monitor.
Try using another
power cord.
There is no power
at the outlet.
•
•
Try using another
electrical outlet.
Screen is blank
and power
indicator is
amber.
The monitor is in
Standby/Suspend mode.
Press any key on the
keyboard or move the
mouse to restore
operation.
"Understanding power
management"on page
•
Check the Power
Options settings on
your computer.
Chapter 3.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-2. Troubleshooting
Problem
The power
Possible cause
The video signal cable
Suggested action
Reference
Be sure the video cable is
"Connecting and
indicator is amber, is loose or disconnected connected with the system
but there is no
image.
from the system or
monitor.
properly.
The monitor brightness Adjust the brightness and
"Adjusting your
and contrast are at the
lowest setting.
menu.
One or more of the This is a characteristic
If there are more than five
Appendix A."Service
pixels appear
discolored.
of the LCD technology pixels missing, contact the
and is not an LCD
defect.
Support Center.
•
•
Fuzzy lines in
text or a
blurry image.
•
Image setup has not Adjust the resolution
"Adjusting your
been optimized.
settings on your system to
for this monitor: 1600 x 900
at 60 Hz.
•
Your system
Horizontal or
vertical lines
through the
image.
Display Properties
setting have not
been optimized.
Perform automatic image
setup. If automatic image
"Selecting a supported
manual image setup.
When working in the native See the Advanced
resolution, you may find
section of your
additional improvements by system’s display
adjusting the Dots Per Inch properties.
(DPI) setting on your
system.
Manual image setup
If automatic image setup does not establish the image that you prefer, perform manual image
setup.(For analog [VGA] only)
Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.
1. Press
2. Use
to open the OSD menu.
to select and press to access.
and press to access.
or to select Clock or Phase adjustment.
or
3. Use or to select
4. Use
•
Clock: (pixel frequency) adjusts the number of pixels scanned by one horizontal
sweep. If the frequency is not correct, the screen shows vertical stripes and the picture
does not have the correct width.
•
Phase: adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the
picture has horizontal disturbances in light picture.
5. When the image no longer looks distorted, select Save to save the adjustments of Clock
and Phase.
6. Press
to leave the OSD menu.
Chapter 3.
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft
Windows Vista, Microsoft Windows 8.
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
Note: You must download file from the Reference and Driver CD to use the Plug and Play
feature in Windows 7.
1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.
4. Open the Display Properties window by clicking Start, Control Panel, Hardware and
Sound icon, and then clicking the Display icon.
5. Click the Change the display settings tab.
6. Click the Advanced Settings icon.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Click Update Driver, then click Browse the computer to find the driver program.
11. Select Pick from the list of device driver program on the computer.
12. Click the Have Disk button. Click the Browse button and navigate to the following
directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).
13. Select the "lenlt2013pwa.inf" file and click the Open button. Click the OK button.
14. Select LEN LT2013pwA and click Next. The files will be copied from the CD to your
hard disk drive.
15. Close all open windows and remove the CD.
16. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
Chapter 3.
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the monitor driver in Windows Vista
To use the Plug and Play feature in Microsoft Windows Vista, do the following:
Note: You must download file from the Reference and Driver CD to use the Plug and Play
feature in Windows Vista.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
Vista operating system.
4. Click Start, Control Panel and then click the Hardware and Sound icon.
5. Click the Personalization icon.
6. Click the Display Settings icon.
7. Click the Advanced Settings button.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Have Disk button. Click the Browse button and navigate to the following
directory: X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).
14. Select the "lenlt2013pwa.inf" file and click the Open button. Click the OK button.
15. Select LEN LT2013pwA and click Next. The files will be copied from the CD to your
hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
Chapter 3.
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the monitor driver in Windows 8
To use the Plug and Play feature in Microsoft Windows 8, do the following:
Note: You must download file from the Reference and Driver CD to use the Plug and Play
feature in Windows 8.
1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
8 operating system.
4. Open the Display Properties window by clicking Start, right-click, choose All
Application, enter Control Panel and Hardware and Sound icon. and then clicking the
Display icon.
5. Click the Change the display settings tab.
6. Click the Advanced Settings icon.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Click Update Driver, then click Browse the computer to find the driver program.
11. Select Pick from the list of device driver program on the computer.
12. Click the Have Disk button. Click the Browse button and navigate to the following
directory:
X:\Monitor Drivers\Windows 8
(where X is the drive letter designator for the CD-ROM drive).
13. Select the "lenlt2013pwa.inf" file and click the Open button. Click the OK button.
14. Select LEN LT2013pwA and click Next. The files will be copied from the CD to your
hard disk drive.
15. Close all open windows and remove the CD.
16. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640 x 480 at
a refresh rate of 60 Hz.
Getting further help
If you still can’t solve your problem, please contact the Lenovo Support Center. For more
Chapter 3.
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Service information
Customer responsibilities
The warranty does not apply to a product which has been damaged due to accident, misuse,
abuse, improper installation, usage not in accordance with product specifications and
instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications.
The following are examples of misuse or abuse and not covered by warranty:
•
Images burned onto the screen of a CRT monitor. Burned image is preventable by utilizing
a moving screen saver or power management.
•
•
Physical damage to covers, bezel, base and cables.
Scratches or punctures on monitor screens.
Service parts
The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to supprot
the customer warranty. Parts are for service use only. The table below shows information for
model 60A0-MAR1-WW.
Table 3-3. List of service parts
FRU (FIELD
Machine
Type/Model(MTM)
REPLACEABLE UNIT)
PART NUMBER
DESCRIPTION
COLOR
03X7999
03X8000
03T8438
03T8439
LT2013p Wide -
Monitor (HDMI)
60A0
Raven Black
Raven Black
Raven Black
Raven Black
LT2013p Wide-Analog 60A0
cable (1.8m, RoHS)
LT2013pWide-USB2.0 60A0
cable (1.8m, RoHS)
LT2013p Wide-FRU
Stand and Base
60A0
Chapter 3.
3-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. Service and Support
The following information describes the technical support that is available for your product,
during the warranty period or throughout the life of your product. Refer to the Lenovo Limited
Warranty for a full explanation of Lenovo warranty terms.
Registering your option
Register to receive product service and support updates, as well as free and discounted
Online technical support
Online technical support is available during the lifetime of a product at:
Product replacement assistance or exchange of defective components also is available during
the warranty period. In addition, if your option is installed in a Lenovo computer, you might be
entitled to service at your location. A Lenovo technical support representative can help you
determine the best alternative.
Telephone technical support
Installation and configuration support through the Customer Support Center will be available
until 90 days after the option has been withdrawn from marketing. After that time, the support
is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also
available for a nominal fee.
Before contacting a Lenovo technical support representative, please have the following
information available: option name and number, proof of purchase, computer manufacturer,
model, serial number and manual, the exact wording of any error message, description of the
problem, and the hardware and software configuration information for your system.
Your technical support representative might want to walk you through the problem while you
are at your computer during the call.
Telephone numbers are subject to change without notice. The most up-to-date telephone list
Country or Region
Telephone Number
Africa
Africa: +44 (0)1475-555-055
South Africa: +27-11-3028888 and 0800110756
Central Africa: Contact the nearest Lenovo
Business Partner
Argentina
Australia
Austria
0800-666-0011 (Spanish)
131-426 (English)
Warranty service and support: 01-211-454-610 (German)
Warranty service and support: 02-225-3611 (Dutch, French)
0800-10-0189 (Spanish)
Belgium
Bolivia
Appendix A.
A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Telephone Number
Brazil
Sao Paulo region: (11) 3889-8986
Outside Sao Paulo region: 0800-701-4815
(Brazilian Portuguese)
Brunei
801-1041 (English, Bahasa Melayu)
Canada
Toronto: 416-383-3344
Outside Toronto: 1-800-565-3344
(English, French)
Chile
Toll Free: 188-800-442-488
800-361-213
(Spanish)
China
86-10-58851110
800-990-8888
(Mandarin)
China
(Hong Kong S.A.R.)
ThinkCentre® Commercial PC: 8205-0333
Multimedia Home PC: 800-938-228
(Cantonese, English, Mandarin)
China
(Macau S.A.R.)
ThinkCentre Commercial PC: 795-9892
Multimedia Home PC: 0800-336
(Cantonese, English, Mandarin)
Colombia
Costa Rica
Croatia
1-800-912-3021 (Spanish)
0-800-011-1029 (Spanish)
0800-0426
Cyprus
+357-22-841100
Czech Republic
Denmark
+420-2-7213-1316
Warranty service and support: 7010-5150 (Danish)
1-866-434-2080 (Spanish)
1-800-426911 (Spanish)
+202-35362525
Dominican Republic
Ecuador
Egypt
El Salvador
Estonia
800-6264 (Spanish)
+372 6776793
+372 66 00 800
Finland
France
Warranty service and support: +358-800-1-4260 (Finnish)
Warranty service and support (hardware): 0810-631-213
Warranty service and support (software): 0810-631-020
(French)
Germany
Greece
Warrantyserviceandsupport:01805 004618 (German)
+30-210-680-1700
Guatemala
Honduras
1800-624-0051 (Spanish)
Tegucigalpa: 232-4222
San Pedro Sula: 552-2234
(Spanish)
Hungary
+36-1-382-5716
+36-1-382-5720
(English, Hungarian)
Appendix A.
A-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Telephone Number
India
1800-425-2666
+91-80-2535-9182
(English)
Indonesia
021 5238 823
Local number only: 001-803-606-282
DID (Direct Inward Dialing): +603 8315 6859
(English, Bahasa Indonesia)
Ireland
Israel
Warranty service and support: 01-881-1444 (English)
Givat Shmuel Service Center: +972-3-531-3900
(Hebrew, English)
Italy
Warranty service and support: +39-800-820094 (Italian)
Japan
Toll Free: 0120-20-5550
International: +81-46-266-4716
The above numbers will be answered with a Japanese language voice
prompt. For telephone support in English, please wait for the Japanese
voice prompt to end, and an operator will answer. Please say "English
support please," and your call will be transferred to an English-speaking
operator.
PC software: 0120-558-695
Overseas calls: +81-44-200-8666
(Japanese)
Korea
1588-6782 (Korean)
+371 7070360
Latvia
Lithuania
Luxembourg
Malaysia
+370 5 278 66 00
+352-360-385-343 (French)
Local number only: 1800-88-1889
DID: +603 8315 6855
(English, Bahasa Melayu)
Malta
+35621445566
Mexico
001-866-434-2080 (Spanish)
+44 (0)1475-555-055
Middle East
Netherlands
New Zealand
Nicaragua
Norway
+31-20-514-5770 (Dutch)
0800-733-222 (English)
001-800-220-1830 (Spanish)
Warranty service and support: 8152-1550 (Norwegian)
Panama
Lenovo Customer Support Center: 001-866-434-2080 (Toll Free)
206-6047 (Spanish)
Peru
0-800-50-866 (Spanish)
Philippines
Poland
1800-1601-0033 (English, Filipino)
+48-22-878-6999 (Polski)
+351-21-892-7046 (Portuguese)
+4-021-224-4015
Portugal
Romania
Appendix A.
A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Telephone Number
Russia
Moscow: +7-(495)-258-6300
Toll Free: +8-800-200-6300
(Russian)
Singapore
Local number only: 800-6011-343
DID: +603 8315 6859 (English)
Slovakia
Slovenia
Spain
+421-2-4954-5555
+386-1-200-50-60 (Slovenian)
91-714-7983
0901-100-000
(Spanish)
Sri Lanka
+9411 2493547
+9411 2493548
(English)
Sweden
Warranty service and support: 077-117-1040 (Swedish)
Switzerland
Warranty service and support: 0800-55-54-54
(German, French, Italian)
Taiwan
886-2-8723-9799
0800-000-700
(Mandarin)
Thailand
Local number only: 1-800-060-066
66 2273 4088
DID: +603 8315 6857 (Thai, English)
Turkey
0212 336 0366 , 00800 448 825 165 (Turkish)
Standard warranty support: 08705-500-900 (English)
1-800-426-7378 (English)
United Kingdom
United States
Uruguay
000-411-005-6649 (Spanish)
Venezuela
Vietnam
0-800-100-2011 (Spanish)
For Northern Area and Hanoi City:
844 3 946 2000 or 844 3 942 6457
For Southern Area and Ho Chi Minh City:
848 3 829 5160 or 844 3 942 6457
(Vietnamese, English)
Appendix A.
A-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Notices
Lenovo may not offer the products, services, or features discussed in this document in all
countries. Consult your local Lenovo representative for information on the products and
services currently available in your area. Any reference to a Lenovo product, program, or
service is not intended to state or imply that only that Lenovo product, program, or service
may be used. Any functionally equivalent product, program, or service that does not infringe
any Lenovo intellectual property right may be used instead.
However, it is the user 's responsibility to evaluate and verify the operation of any other
product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in
this document. The furnishing of this document does not give you any license to these patents.
You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of
express or implied warranties in certain transactions, therefore, this statement may not apply
to you.
This information could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new editions
of the publication. Lenovo may make improvements and/or changes in the product(s) and/or
the program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life
support applications where malfunction may result in injury or death to persons. The
information contained in this document does not affect or change Lenovo product
specifications or warranties. Nothing in this document shall operate as an express or implied
license or indemnity under the intellectual property rights of Lenovo or third parties. All
information contained in this document was obtained in specific environments and is presented
as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes
appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only
and do not in any manner serve as an endorsement of those Web sites. The materials at those
Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at
your own risk.
Any performance data contained herein was determined in a controlled environment.
Therefore, the result obtained in other operating environments may vary significantly. Some
measurements may have been made on development-level systems and there is no guarantee
that these measurements will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results may vary. Users
of this document should verify the applicable data for their specific environment.
Appendix B.
B-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Recycling information
Lenovo encourages owners of information technology (IT) equipment to responsibly recycle
their equipment when it is no longer needed. Lenovo offers a variety of programs and services
to assist equipment owners in recycling their IT products. For information on recycling
Lenovo products, go to:
Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor that is
the property of the company, you must do so in accordance with the Law for Promotion of
Effective Utilization of Resources. Computers and monitors are categorized as industrial waste
and should be properly disposed of by an industrial waste disposal contractor certified by a
local government. In accordance with the Law for Promotion of Effective Utilization of
Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the
collecting, reuse, and recycling of disused computers and monitors. For details, visit the
Promotion of Effective Utilization of Resources, the collecting and recycling of home-used
computers and monitors by the manufacturer was begun on October 1, 2003. This service is
provided free of charge for home-used computers sold after October 1, 2003. For details, visit
Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy
metals or other environmental sensitive substances. To properly dispose of disused
components, such as a printed circuit board or drive, use the methods described above for
collecting and recycling a disused computer or monitor.
Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
The Lenovo logo
ThinkCenter
ThinkPad
ThinkVision
Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies.
Other company, product, or service names may be trademarks or service marks of others.
Appendix B.
B-2
Download from Www.Somanuals.com. All Manuals Search And Download.
|