D
EN
F
User Manual
Safety Instructions
Symbols used
English
The symbols used in the Safety Instructions have the
following meanings:
Congratulations on the purchase of your
Leica DISTO™ D330i .
I
WARNING:
Indicates a potentially hazardous situation or
an unintended use which, if not avoided, will result in
death or serious injury.
Carefully read the Safety Instruc-
E
ƽ
tions and the User Manual before
P
using this product.
The person responsible for the instrument must
ensure that all users understand these directions and
adhere to them.
NL
DK
S
CAUTION:
ƽ
Indicates a potentially hazardous situation or
an unintended use which, if not avoided, may result
in minor injury and/or in appreciable material, finan-
cial and environmental damage.
Contents
Safety Instructions .............................................1
Start-up................................................................6
Menu functions...................................................9
Operation...........................................................11
Measuring ..........................................................12
Functions...........................................................13
Working with BLUETOOTH® ............................19
Appendix............................................................20
N
Important paragraphs which must be adhered
)
to in practice as they enabled the product to be used
FIN
J
in a technically correct and efficient manner.
Use of the instrument
CN
ROK
PL
H
Permitted use
•
•
•
•
Measuring distances
Computing functions, e. g. areas and volumes
Storing measurements (BLUETOOTH®)
Measuring tilts
RUS
CZ
Leica DISTO™ D330i 776751 en
1
Safety Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
To understand the safety instructions on the
product and the instructions in the User Manual.
To be familiar with local safety regulations
relating to accident prevention.
failure due to installed safety measures (e.g. safety
limit switch), it is assured that no damage will occur.
D
EN
F
WARNING:
Flat batteries must not be disposed of with
household waste. Care for the environment and take
them to the collection points provided in accordance
with national or local regulations.
ƽ
To inform Leica Geosystems immediately if the
equipment becomes unsafe.
I
Hazards in use
E
The product must not be disposed of with
household waste.
Dispose of the product appropriately in
accordance with the national regulations in
force in your country.
Always prevent access to the product by
unauthorized personnel.
CAUTION:
P
ƽ
Watch out for erroneous distance measure-
ments if the instrument is defective or if it has been
dropped or has been misused or modified.
NL
DK
S
Precautions:
Carry out periodic test measurements. Particularly
after the instrument has been subject to abnormal
use, and before, during and after important measure-
ments.
Product specific treatment and waste
management information can be downloaded from
the Leica Geosystems home page at
received from your Leica Geosystems dealer.
N
FIN
J
Make sure the Leica DISTO™ optic is kept clean and
that there is no mechanical damage to the bumpers.
CAUTION:
ƽ
CN
ROK
PL
H
Electromagnetic Compatibility
(EMC)
The term "electromagnetic compatibility" is taken to
mean the capability of the product to function
smoothly in an environment where electromagnetic
radiation and electrostatic discharges are present,
and without causing electromagnetic interference to
other equipment.
In using the instrument for distance measure-
ments or for positioning moving objects (e.g. cranes,
building equipment, platforms, etc.) unforeseen
events may cause erroneous measurements.
Precautions:
Only use this product as a measuring sensor, not as
a control device. Your system must be configured and
operated in such a way, that in case of an erroneous
measurement, malfunction of the device or power
RUS
CZ
Leica DISTO™ D330i 776751 en
3
Safety Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING:
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help
D
EN
F
ƽ
The Leica DISTO™ conforms to the most strin-
gent requirements of the relevant standards and
regulations. Yet, the possibility of it causing interfer-
ence in other devices cannot be totally excluded.
WARNING:
CAUTION:
I
ƽ
ƽ
Changes or modifications not expressly
Never attempt to repair the product yourself. In
approved by Leica Geosystems for compliance could
void the user’s authority to operate the equipment.
E
case of damage, contact the local dealership.
P
FCC statement (applic. in U.S.)
Use of the product with
BLUETOOTH®:
WARNING:
Electromagnetic radiation can cause distur-
bances in other equipment, in installations (e.g.
medical ones such as pacemakers or hearing aids)
and in aircraft. It can also affect humans and animals.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference in a residential installation.
NL
DK
S
ƽ
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the user
is encouraged to try to correct the interference by
one or more of the following measures:
N
FIN
J
Precautions:
Athough this product conforms to the most stringent
standards and regulations, Leica Geosystem cannot
totally exclude the possibility of harm to people and
animals.
CN
ROK
PL
H
•
Do not use the product near petrol stations,
chemical plants, in areas with a potentially explo-
sive atmosphere and where blasting takes place.
Do not use the product near medical equipment.
Do not use the product in airplanes.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
RUS
CZ
•
•
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Safety Instructions
•
Do not use the product near your body for
extended periods.
WARNING:
D
EN
F
ƽ
Looking directly into the beam with optical aids
(e.g. binoculars, telescopes) can be hazardous.
CAUTION:
ƽ
Never attempt to repair the product yourself. In
Precautions:
Do not look directly into the beam with optical aids.
case of damage, contact the local dealership.
I
CAUTION:
ƽ
Laser classification
Looking into the laser beam may be hazardous
E
to the eyes.
Integrated distancemeter
P
Precautions:
The Leica DISTO™ produces a visible laser beam
which emerges from the front of the instrument.
Do not look into the laser beam. Make sure the laser
is aimed above or below eye level. (particularly with
fixed installations, in machines, etc.)
NL
DK
S
N
FIN
J
CN
ROK
PL
H
It is a Class 2 laser product in accordance with:
•
IEC60825-1 : 2007 "Radiation safety of laser
products"
Laser Class 2 products:
Do not stare into the laser beam or direct it towards
other people unnecessarily. Eye protection is
normally afforded by aversion responses including
the blink reflex.
RUS
CZ
Leica DISTO™ D330i 776751 en
5
Safety Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
D
EN
F
Labelling
Start-up
Inserting/replacing batteries
Laser Radiation
Do not stare into the beam
Laser class 2
acc. IEC 60825-1:2007
I
Maximum radiant power:
<1mW
Emitted wavelength:
620-690nm
E
Beam divergence: 0.16 x 0.6 mrad
-9
Pulse duration:
1 x 10
s
P
NL
DK
S
N
FIN
J
Position of the product label:
CN
ROK
PL
H
2
1
Remove battery compartment lid and attach
handstrap.
Insert batteries, observing correct polarity.
Close the battery compartment again. Replace
Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
2
3
US 5949531
WO 0244754
WO 9818019
PATENTS: WO 9427164
WO 0216964
EP 1195617
the batteries when the symbol
nently in the display.
flashes perma-
RUS
CZ
Only use alkaline or rechargeable batteries.
Remove the batteries before any long period
TM
)
)
Type: Leica DISTO D330i
Power: 3V
/
of non-use to avoid the danger of corrosion.
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Start-up
D
EN
F
Changing the reference point
(multifunctional endpiece)
Keypad
1
2
I
13
11
4
E
3
10
5
P
The instrument can be adapted for the following
measuring situations:
NL
DK
S
6
8
9
7
12
N
FIN
J
1
2
3
4
5
6
7
8
9
ON / DIST (On/measuring) - button
Horizontal distance - button
Plus (+) - button
CN
ROK
PL
H
•
•
For measurements from an edge, fold out the
positioning bracket until it locks in place at a 90
degree angle.
For measurements from a corner, open the posi-
tioning bracket until it locks in place, then push
the positioning bracket lightly to the right to fold
it out fully.
Minus (-) - button
Area / volume - button
Storage - button
Reference - button
Functions - button
Timer - button
RUS
CZ
10 Second function button
11 Menu/equal - button
12 Clear/off - button
A built-in sensor automatically detects the orienta-
tion of the positioning bracket and adjusts the zero
point of the instrument accordingly.
13 Bluetooth button
Leica DISTO™ D330i 776751 en
7
Start-up
Download from Www.Somanuals.com. All Manuals Search And Download.
13 Battery status
14 Area/volume
15 Tilt
D
EN
F
Display
19
13
14
6
16 Horizontal distance measurement using tilt
17 Triangle area
18 Timer
7,8,9
15,16
33 27 17 18
12
I
1
2
4
3
5
20
29
21
30
19 Menu
28
E
20 Circumference
21 Wall area
22 Ceiling area
23 Intermediate line 1
24 Intermediate line 2
25 Intermediate line 3
26 Summary line
27 Information
28 Spirit level
29 Tilt angle
30 Distance measured
31 Indirect height
32 Detail display
33 Bluetooth Icon
10,11
P
23
24
25
NL
DK
S
22
31
N
26
FIN
J
32
1
2
3
4
5
6
7
8
9
Laser active
Reference (front)
CN
ROK
PL
H
Reference (rear)
Reference (corner stop)
Measuring with the tripod
Stake out function
Single Pythagoras measurement
Double Pythagoras measurement
Double (partial height) measurement
RUS
CZ
10 Save constant value, call up constant value
11 Historical memory, call up values
12 Spirit level (numeric)
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Start-up
D
EN
F
Menu functions
Settings
The menu allows settings to be changed and perma-
nently stored. All menu settings will remain active
when switching off the device or changing the
batteries. See page 11 for resetting the factory
defaults
1
I
7
2
EXIT
E
P
0.0°
NL
DK
S
Navigation in the menu
6
3
The menu allows settings to be made at the user
level. The instrument can be specifically configured to
your personal requirements.
4
5
N
General description
FIN
J
button (pressed long) - You are in the
the units set and the first menu item "Unit" are
displayed.
,
or
button (pressed short) brings up the next menu
item.
A long press on the
the new settings made in the submenu items .
Pressing the button for longer in the menu
button to make changes in menu items.
CN
ROK
PL
H
button (pressed short) pages through each
menu item.
button in the menu confirms
allows you to quit the settings function without
saving.
RUS
CZ
Leica DISTO™ D330i 776751 en
9
Menu functions
Download from Www.Somanuals.com. All Manuals Search And Download.
D
EN
F
Setting the unit for distance
measurements
Measuring with the tripod (
)
The reference must be appropriately adjusted in
order to be able to take correct measurements with
The following units can be set:
a tripod. To do this select
You can switch the reference on the tripod on or off.
The setting can be seen on the display
ON in this menu item.
Distance
0.000 m
0.0000 m
0.00 m
Area
Volume
0.000 m³
I
0.000 m²
0.000 m²
0.000 m²
0.00 ft²
0.00 ft²
0.00 ft²
0.00 ft²
0.00 ft²
0.00 ft²
0.00 ft²
0.00 ft²
1.
2.
.
E
0.000 m³
0.000 m³
0.00 ft³
0.00 ft³
0.00 ft³
0.00 ft³
0.00 ft³
0.00 ft³
0.00 ft³
0.00 ft³
3.
4.
5.
P
0.00 ft
Beep (
)
NL
DK
S
0'00'' 1/32
0'00'' 1/16
0'00'' 1/8
0.0 in
You can switch the beep on or off.
6.
7.
8.
Level in status field (
The level (in °) in status field can be switched on or
off.
)
N
9.
10.
11.
0 1/32 in
0 1/16 in
0 1/8 in
FIN
J
Reset - returning the instrument to
the factory settings (
)
CN
ROK
PL
H
The instrument has a RESET function. When you
select the menu function RESET and confirm, the
instrument defaults to the factory settings.
Setting the unit for tilt
measurements
The following units can be set for tilt measurements:
A reset returns the following values to their factory
settings:
Units for tilt
+/- 0.0°
0.00%
1.
2.
RUS
CZ
•
•
•
•
Reference (rear)
Display illumination (ON)
Beep (ON)
Unit (m(mm))
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Menu functions
•
Stack and memory are erased
D
EN
F
Reference setting
All customised settings and stored values are
The default reference setting is from the rear of the
instrument.
)
also lost.
Press this button to take the next measurement
I
from the front edge
ever the reference setting is changed.
. A special beep sounds when-
Operation
E
After a measurement the reference returns automat-
ically to the default setting (rear reference).
Switching on and off
P
Switches on the instrument and laser. The
display shows the battery symbol until the
next button is pressed.
NL
DK
S
Pressing this button for longer switches
the instrument off.
The instrument switches off automatically
after six minutes of inactivity.
N
FIN
J
CLEAR button
The last action is cancelled. While making
area or volume measurements, each single measure-
ment can be deleted and remeasured in series.
CN
ROK
PL
H
Press this button for longer and the front refer-
ence is set as default until unit is powered off.
Press this button, the rear reference is set again.
RUS
CZ
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Operation
D
EN
F
Minimum/maximum measurement
Measuring
This function allows the user to measure the
minimum or maximum distance from a fixed
measuring point. It can also be used as to determine
spacings.
Single distance measurement
Press to activate the laser. Press again to trigger
the distance measurement.
I
The result is displayed immediately.
E
min.
max.
P
Tilt measurement
NL
DK
S
The tilt sensor measures angles between 45°.
)
During the measurement of angle, the instru-
)
ment should be held without transverse tilt, as far as
possible, ( 10°).
N
It is commonly used to measure room diagonals
(maximum values) or horizontal distances (minimum
values).
Horizontal measurement
FIN
J
Press button to activate horizontal measure-
ment in the instrument. The following symbol
appears in the display
. If the button is active,
Press and hold down this button until you hear
a beep. Then slowly sweep the laser back and forth
and up and down over the desired target point - (e.g.
into the corner of a room).
CN
ROK
PL
H
the horizontal distance is displayed in the summary
line for each distance measurement (up to max. +/-
45° and up to max. a transverse tilt of +/-10°).
Press the
information on the measurement, for example the tilt
angle , the distance measured and the indi-
rect height
Press button again to switch off horizontal
measurement.
button for longer to display additional
Press to stop continuous measurement. The
values for maximum and minimum distances are
shown in the display as well as the last measured
value in the summary line.
RUS
CZ
.
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Measuring
D
EN
F
Laser continuous
Functions
Press and hold down the key when switching
Addition / subtraction
Distance measuring.
on the device until the character
nently in the display and a beep sounds. Every further
appears perma-
I
press of the
ment.
key releases a distance measure-
The next measurement is added to the previous
one.
E
Press and hold the key to switch the device
and Laser continuous operation off.
If the laser is in continuous operation mode,
The next measurement is subtracted from the
previous one.
P
NL
DK
S
This process can be repeated as required.
)
the device switches off automatically after 15
minutes.
Press this button and the result is then always
shown in the summary line.
The last step is cancelled.
N
FIN
J
Area
Press once. The
symbol appears in the
display.
CN
ROK
PL
H
Press this button to take the first length
measurement (e.g. length).
Press it again to take the second length
measurement (e.g. width).
The result is displayed in the summary line.
RUS
CZ
Press the
circumference
button for longer to calculate the
.
Leica DISTO™ D330i 776751 en
13
Functions
Download from Www.Somanuals.com. All Manuals Search And Download.
D
EN
F
Volume
Tilt measurement
Press this button once to activate the tilt
Press this button twice. The
appears in the display.
symbol
sensor. The
symbol appears in the display. The
tilt is continuously shown as ° or % depending on the
setting.
Press this button to take the first length
measurement (e.g. length).
I
Press to measure the inclination and the
distance.
Press this button to take the second length
measurement (e.g. width).
E
P
Press this button to take the third length measure-
ment (e.g. height).
NL
DK
S
The volume then appears in the summary line.
Press the
room information such as ceiling/floor area
surface area of the walls , circumference
The or button can be used to add or
subtract multiple area and volume calcuations
button for longer to display additional
,
N
.
FIN
J
)
followed by the
button to total the values.
CN
ROK
PL
H
RUS
CZ
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Functions
D
EN
F
Triangular area
Stake out function
The area of a triangle can be calculated by the
measurement of three sides.
Two different distances (a and b) can be entered into
the instrument and can then be used to mark off
defined measured lengths, e.g. in the construction of
wooden frames.
I
E
P
1
2
NL
DK
S
16 in
24 in
3
16 in
16 in
16 in
16 in
Press the key two times - the triangle symbol
appears in the display.
N
Entering stake out distances:
Press this button three times and the stake out
FIN
J
Press the key and measure the first side of the
triangle.
a
function symbol appears in the display
.
b
b
Press the key and measure the second side of
the triangle.
The value (a) and the corresponding intermediate line
flash.
CN
ROK
PL
H
By using
and
, you can adjust the values
Press the key and measure the third side of the
triangle.
(first a and then b) to suit the desired stake out
distances. Holding the buttons down increases the
rate of change of the values.
The resulting area
is shown in the summary row.
Press and hold the key to display additional infor-
mation about the measurement, such as the angle
RUS
CZ
Once the desired value (a) has been reached it can be
confirmed with the
button.
included by the first two measurements
perimeter of the triangle
and the
The value (b) and the intermediate line flashes (the
.
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Functions
defined value (a) is automatically adopted). Value (b)
can be entered using and
The defined value (b) is confirmed with the
button.
D
EN
F
Indirect measurement
The instrument can calculate distances using
Pythagoras’ theorem.
.
Make sure you adhere to the prescribed
sequence of measurement:
Pressing the
button starts the laser measure-
)
I
ment. The display shows required stake out distance
in the summary line between the stake out point
(first a and then b) and the instrument (rear refer-
ence).
•
All target points must be in a horizontal or vertical
plane.
E
P
•
The best results are achieved when the instru-
ment is rotated about a fixed point (e.g. with the
positioning bracket fully folded out and the
instrument placed on a wall).
NL
DK
S
If the DISTO™ is then moved slowly along the stake
out line the displayed distance decreases. The instru-
ment starts to beep at a distance of 4 in from the
•
The minimum/maximum function can be used -
see explanation in "Measuring -> Minimum/
maximum measurement". The minimum value
must be used for measurements at right angles to
the target; the maximum distance for all other
measurements.
next stake out point.
a
b
b
N
The arrows in the display
indicate in which direc-
tion the DISTO™ needs to be moved in order to
achieve the defined distance (either a or b). As soon
as the stake out point is reached the beep changes.
FIN
J
Make sure that the first measurement and the
distance to be measured are at right angles. Use the
Minimum/maximum function, as explained in
)
CN
ROK
PL
H
The function can be stopped at any time by pressing
the
button.
"Measuring -> Minimum/maximum measurement".
RUS
CZ
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Functions
Press to stop continuous measurement (2). The
result is displayed in the summary line, the partial
results in the secondary line.
Indirect measurement - determining a dis-
tance using 2 auxilliary measurements
D
EN
F
Indirect Measurement - determining a dis-
tance using 3 measurements
I
E
P
NL
DK
S
1
2
3
N
e.g. for measuring building heights or widths. It is helpful
to use a tripod when measuring heights that require the
measurement of two or three measurements.
FIN
J
CN
ROK
PL
H
Press this button four times, the display shows
Press this button five times; the display shows
the following symbol
. The laser is switched on.
the following symbol
. The laser is switched on.
Aim at the upper point (1) and trigger the
measurement. After the first measurement the value
is adopted. Keep the instrument as horizontal as
possible.
Aim at the upper point (1) and trigger the
measurement. After the first measurement the value
is adopted. Keep the instrument as horizontal as
possible
RUS
CZ
Press and hold down this button to trigger
continuous measurement, sweep the laser back and
forth and up and down over the ideal target point.
Press and hold down this button to trigger
continuous measurement, sweep the laser up and
Leica DISTO™ D330i 776751 en
17
Functions
Download from Www.Somanuals.com. All Manuals Search And Download.
down over the ideal target point.
After the first measurement is recorded and shown
onscreen, the display flashes (2).
D
EN
F
Press to stop continuous measurement (2). The
value is adopted. Aim at the lower point and
Triggers the measurement. After the second
measurement is recorded and shown onscreen, the
display flashes (3).
press this button to trigger the measurement
(3). The result is displayed in the summary line, the
partial results in the secondary lines.
I
Press and hold down this button to trigger
continuous measurement. Sweep the laser up and
down over the ideal target point.
E
Indirect measurement - determining a chain
value using 3 measurements
P
Press this button to end continuous measure-
ment. The result is displayed in the summary line, the
partial results in the secondary lines.
NL
DK
S
Storage of constants/historical
storage
N
FIN
J
1
2
Storage of a constant
3
You can store and recall a frequently used value e.g.
height of a room. Measure the desired distance,
CN
ROK
PL
H
press and hold the
to confirm storage.
button until the device beeps
e.g. determining the height between point 1 and
point 2 using three target points.
Recalling the constant
Press this button once to recall the constant
and make it available for further calculations by
Press this button six times; the display shows
RUS
CZ
the following symbol
. The laser is switched on.
pressing button
.
Aim at the upper point (1).
Press this button and trigger the measurement.
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Functions
Adjusting the constant
D
EN
F
Working with BLUETOOTH®
Press the
button for longer to change the constant
- the constant flashes, you can now change the
constant to the required value using the
Switching on BLUETOOTH® /
sending measurements
or
button. Press the
button to save the constant.
I
A quick press on the
- key starts DISTO™ BLUE-
Historical storage
TOOTH®. The data connection must then be estab-
lished out from a Pocket PC / PC by the application
software. A BLUETOOTH® - icon will appear in the
display until this has been successfully completed.
BLUETOOTH® automatically switches off if the
connection to the Pocket PC / PC is not established
within 240 sec from when the BLUETOOTH® was
switched on.
E
Press this button twice and the previous 20
results (measurements or calculated results) are
shown in reverse order.
P
NL
DK
S
The
and
Press this button to use a result from the
summary line for further calculations.
Pressing the and buttons at the same
buttons can be used for navigation.
N
Whilst the first connection between the
Pocket PC/PC and the DISTO™ is being established, a
prompt for the Pin-code of the DISTO™ may be
displayed. In this case, enter the code 0000 into your
Pocket PC/PC.
time erases all the values in historical storage.
)
FIN
J
Timer (self-triggering)
Press this button to set a 5-second time delay.
or
Press and hold down this button until the
desired time delay is reached (max. 60 seconds).
Once the key is released the remaining seconds until
measurement (e.g. 59, 58, 57...) are displayed in a
countdown. The last 5 seconds are counted down
with a beep. After the last beep the measurement is
taken and the value is displayed.
CN
ROK
PL
H
Switching off BLUETOOTH®
BLUETOOTH® switches off as soon as the DISTO™ is
switched off.
RUS
CZ
The timer can be used for all measurements.
)
Leica DISTO™ D330i 776751 en
19
Working with BLUETOOTH®
Download from Www.Somanuals.com. All Manuals Search And Download.
The free software supplied is designed to
D
EN
F
)
The direction keys
provide the user with basic functionality. Leica
Geosystems provides no warranty for this free soft-
ware and offers no support for it. Leica Geosystems
accepts no liability whatsoever arising from the use
of the free software and is not obliged to provide
corrections nor to develop updates or upgrades.
You can find numerous commercial vendors of soft-
ware for a wide range of applications on our
homepage.
Eight direction keys (identified by a small arrow near
the key) on the operator's keypad are used to
manoeuvre the cursor. The direction keys become
active when you switch to the second level (by
I
pressing the
key). The distance measuring key is
E
active in both levels. The functionality of the direction
keys depends on the software used.
P
NL
DK
S
Transmitting the measurement
If your software supports the direction keys use them
to select the appropriate position for the cursor.
Appendix
Message codes
All message codes are displayed with either
"Error". The following errors can be corrected:
Press the
button briefly to transfer the value
N
from the summary row to the pocket PC / PC.
or
FIN
J
Press the
botton long to transfer all values from
the display.
Cause
Remedy
For further details please consult your manual for the
software used.
156
160
CN
ROK
PL
H
Transverse tilt
Hold the instrument
without any transverse
tilt
greater than 10°
Main tilt direction,
angle too high
(> 45°)
Measure angle up to
During data transmission
max. 45°
If the data is not confirmed as being successfully
received by the Pocket PC/ PC then no new measure-
ment can be processed. The Info code "240" appears
in the display if no data transmission has taken place
204
240
245
Calculation error
Repeat procedure
Data transfer error Repeat procedure
2nd button pressed Establish Bluetooth
RUS
CZ
although no Blue-
tooth connection
exists.
connection
after 2 seconds. Press the
- key and repeat
the measurement and then transmit it.
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Appendix
Power Range
D
EN
F
Cause
Temperature too
Remedy
Cool down instrument
Technology™:
0.05 m to 100 m
2 in. to 325 ft
252
253
255
Range (use target plate
high
from about 80m/260ft)
Temperature too
low
Warm up instrument
Smallest unit displayed
Distance measurement
Minimum/maximum
measurement, Continuous
measurement
0.1 mm/ 1
/32nd
9
Receiver signal too Use target plate
I
weak, measurement
time too long,
9
E
distance > 100 m
256
257
Received signal too Target too reflective
P
Area/volume calculation of
9
9
9
strong
(use target plate)
room data
NL
DK
S
Wrong measure-
Darkentarget(measure
Addition / subtraction
ment, background
in different lighting
Indirect measurement
brightness too high conditions)
using Pythagoras
260
Laser beam inter-
Repeat measurement
rupted
Tilt measurements:
Tilt sensor:
Error
Cause
Error Hardware error
Remedy
N
Accuracy
Switch on/off the
device several times. If
the symbol still
(2 σ, standard deviation)
FIN
J
- to laser beam
- to the housing
0.3°
0.3°
9
appears, then your
instrument is defective.
Please call your dealer
for assistance.
Horizontal measurement
CN
ROK
PL
H
Indirect measurement
using tilt sensor (direct
horizontal distance)
9
Angle measurement using
9
tilt sensor( 45°)
Technical data
General:
Distance
Laser class
II
measurements:
Measuring accuracy*
up to 10 m
typically: 1/16 in*
RUS
CZ
Laser type
635 nm, < 1 mW
(
1.0mm)
Ø laser point
6 / 30 / 60 mm
(2 σ, standard deviation)
(at distances)
(10 / 50 / 100 m)
Autom. laser switch-off
after 3 min
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Appendix
Autom. instrument
switch-off
Display illumination
Multifunctional endpiece
Timer (self-triggering)
Save constant value
D
EN
F
after 6 min
Measuring conditions
9
9
9
9
Measuring range
The range is limited to 325 feet.
At night or dusk and if the target is in shadow the
measuring range without target plate is increased.
Use a target plate to increase the measurement
range during daylight or if the target has poor reflec-
tion properties.
I
Historical storage
E
9
9
(20 values)
P
BLUETOOTH® 2.0
Range of BLUETOOTH®
NL
DK
S
10 m
9
Cl. 2
Target surfaces
Tripod thread
Battery life,
up to
Measuring errors can occur when measuring toward
colourless liquids (e.g. water) or dust free glass,
Styrofoam or similar semi-permeable surfaces.
Type AAA, 2 x 1.5V
5 000 measurements
Protection against
IP 54, dust-proof,
N
splashes and dust
splash-proof
Aiming at high gloss surfaces may deflect the laser
beam and lead to measurement errors.
FIN
J
Dimensions
127 x 49 x 27.3 mm
5 x 1.93 x 1.06 in
150 g / 5.25oz
Weight (with batteries)
Temperature range:
Against non-reflective and dark surfaces the
measuring time may increase.
CN
ROK
PL
H
Storage
-13°F up to +158°F
14°F up to +122°F
Operation
* maximum deviation occurs under unfavourable conditions such
as bright sunlight or when measuring to poorly reflecting or very
rough surfaces. Measuring accuracy between 10 m and 30 m may
deteriorate to approx. 0.025 mm/m, for distances above 30 m
to 0.1 mm/m.
RUS
CZ
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Appendix
D
EN
F
Care
Do not immerse the instrument in water. Wipe off dirt
with a damp, soft cloth. Do not use aggressive
cleaning agents or solutions. Handle the instrument
as you would a telescope or camera.
I
E
Warranty
P
The Leica DISTO™ D330i comes with a three* year
warranty from Leica Geosystems AG.
NL
DK
S
More detailed information can be found at:
N
All illustrations, descriptions and technical specifica-
tions may be subject to change without prior notice.
FIN
J
* To receive the three year warranty, the product must be regis-
purchase date. If the product is not registered, a two year
warranty applies.
CN
ROK
PL
H
RUS
CZ
Leica DISTO™ D330i 776751 en
23
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
D
EN
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
H
RUS
CZ
Leica DISTO™ D330i 776751 en
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Appendix
Leica Geosystems AG, Heerbrugg, Switzerland has been certified as being equipped with a
quality system which meets the International Standards of Quality Management and Quality
Systems (ISO standard 9001) and Environmental Management Systems (ISO standard 14001).
Total Quality Management - Our commitment to total customer satisfaction. Ask your local
Leica Geosystems agent for more information about our TQM program.
Copyright Leica Geosystems AG, Heerbrugg,
Switzerland 2010
Translation of original text (776751)
Pat. No.: WO 9427164, WO 9818019, WO 0244754, WO 0216964,
US 5949531, EP 1195617, US 7030969, WO 03104748
Leica Geosystems AG
CH-9435 Heerbrugg
(Switzerland)
Download from Www.Somanuals.com. All Manuals Search And Download.
|