Legacy Car Audio Car Video System LD63MU User Manual

LD63MU  
OWNER's MANUAL  
Mobile Video System  
CAR DVD/VCD/CD/MP3 PLAYER WITH MPEG4  
SEL  
CLK  
COMPACT  
TA/AF  
OPEN  
E
O
N
DIGITAL VIDEO  
VOL-  
BND  
CH 1-6  
IR  
APS  
MOD  
VOL+  
COMPACT  
DISP  
DIGITAL AUDIO  
MU/PTY  
AUX IN  
DVD/RECEIVER CONTROL  
POWER  
REPEAT  
MUTE  
PLAY/PAUSE  
STOP  
ANGLE  
MO/ST  
ZOOM  
MENU  
LO/DX  
MODE  
EQ  
CLK  
OSD  
BAND  
TITLE/PBC  
A/PS  
VOL  
ENTER  
TOP  
1
INT  
2
5
3
RDM  
VOL  
4
6
9
0
SEL  
7
8
SETUP  
GOTO  
+10  
FLIP DOWN AND DETACHABLE PANEL  
3.6 INCH WIDE TFT COLOR LCD SCREEN  
CAR DVD/VCD/CD/MP3 PLAYER  
AM/FM-RDS DIGITAL PLL TUNING RADIO  
MPEG4 PLAYER  
USB CONNECT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
This product incorporates copyright  
protection technology that is protected  
by method claims of certain U.S. Patents  
and other intellectual property rights  
owned by Macrovision Corporation and  
other rights owners.  
CAUTION:  
This DVD Player Is A Class I Laser Pro-  
duct. However This DVD Player Uses  
A Visible/invisible Laser Beam Which  
Could Cause . Hazardous Radiation  
Exposure If Directed.  
Use of this copyright protection  
technology must be authorized by Macro  
vision Corporation, and is intended for  
home and other limited viewing uses  
only unless otherwise authorized by  
Macrovision Corporation.  
Be Sure To Operate The Dvd Player  
Correctly As Instructed.  
Use Of Controls Or Adjustments Or  
Performance Of Procedures Other Than  
Those Specified Herein May Result In  
Hazardous Radiation Exposure. do Not  
Open Covers And Do Not Repair Your-  
self. Refer Servicing To Qualified  
Personnel.  
Reverse engineering or disassembly is  
prohibited.  
REGION MANAGEMENT  
INFORMATION:  
This DVD Player is designed and manu-  
factured to respond to the Region  
Management Information that is record-  
ed on a DVD disc. If the Region number  
described on the DVD disc does not  
correspond to the Region number of this  
DVD Player, this DVD Player cannot  
play this disc.  
WARNING:  
TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE  
THIS EQUIPMENT TO RAIN OR  
MOISTURE.  
TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, AND ANNOYING  
INTERFERENCE, USE ONLY THE  
RECOMMENDED ACCESSORIES.  
THIS DEVICE IS INTENDED FOR  
CONTINUOUS OPERATION.  
-2-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC NOTES  
Disc formats supported by this  
player  
(although not enough to make it unus-  
able) depending on your handling it and  
conditions in the usage environment.  
Note these scratches are not an indica-  
tion of any problem with the player.  
Audio and Video  
Disc size 12 cm  
DVD  
VCD  
Audio and Video  
Disc size 12 cm  
Label side  
up  
Audio  
Disc size 12 cm  
CD  
Do not touch  
the  
underside  
of the disc  
Audio  
Disc size 12 cm  
MP3  
MP3  
CD-RW  
Discs which cannot be played  
Do not  
bend  
with this player  
DVD-ROM  
DVD-RAM  
CDV  
CD-G  
Wipe the disc from  
center  
toward the outside  
edge  
Handling and Cleaning  
Dirt, dust, scratches and warping disc  
will cause misoperation.  
Do not place stickers or make  
scratches on discs.  
Preparing New Discs with Rough  
Spots  
A new disc may have rough edges on  
its inside and outside edges.If a disc  
with rough edges is used, the proper  
setting will not be performed and the  
player will not play the disc.Therefore,  
remove the rough edges in advance  
by using a ball point pen or pencil as  
shown on the right.To remove the  
rough edges, press the side of the pen  
or pencil against the inside and outside  
edges of the disc.  
Do not warp discs.  
A disc should always be kept in its  
case when not in use to prevent from  
damaging.  
Do not place discs in the following  
places:  
1.Direct sunlight  
2.Dirty, dusty and damp areas  
3.Near car heaters  
4.On the seats or dashboard  
Rough spots  
on  
outside edge  
Disc Cleaning  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, use a soft cloth  
slightly moistured with isopropyl  
(rubbing) alcohol. Never use solvents  
such as benzine, thinner or conventional  
record cleaners as they may mar the  
surface of the disc.  
Ball point pen  
or pencil  
Rough spots  
on inside  
edge  
Note:  
A disc may become somewhat scratched  
-3-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
NOTES:  
If installation angle exceeds 30 from  
horizontal, the unit might not give its  
optimum performance.  
Choose the mounting location where the  
unit will not interfere with the normal  
driving function of the driver.  
30  
Before finally installing the unit, connect  
the wiring temporarily and make sure it  
is all connected up properly and the unit  
and the system work properly.  
Use only the parts included with the unit  
to ensure proper installation. The use of  
unauthorized parts can cause  
Avoid installing the unit where it would  
be subject to high temperature, such  
as from direct sunlight, or from hot air,  
from the heater, or where it would be  
subject to dust, dirt or excessive  
vibration.  
malfunctions.  
Consult with your nearest dealer if insta-  
llation requires the drilling of holes or  
other modifications of the vehicle.  
DIN FRONT/REAR-MOUNT  
This unit can be properly installed either  
from "Front"(conventional DIN Front-  
mount) or "Rear"(DIN Rear-mount  
installation, utilizing threaded screw  
holes at the sides of the unit chassis).  
For details, refer to the following  
illustrated installation methods.  
Install the unit where it does not get in  
the driver's way and cannot injure the  
passenger if there is a sudden stop,  
like an emergency stop.  
DASH BOARD  
HEX NUT  
METAL MOUNTING  
STRAP  
SPRING WASHER  
PLAIN WASHER  
TAPPING SCREW  
CONSOLE  
SLIDE BRACKET  
HOUSING  
HEX BOLT  
-4-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
KEY PLATE  
PLASTIC COVER  
KEY PLATE  
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING , first remove  
the PLASTIC COVER of the both sides away, then insert the two KEY PLATE into  
left and right side of chassis as above illustration.  
DETACHING THE FRONT PANEL  
2. Slide the guide knob to remove the right  
side first, slide it to the left, and pull it off  
towards you .  
1. Press the OPEN button to flip down the  
front panel .  
GUIDE Knob  
OPEN button  
-5-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
2. Push the right side of the front panel  
until it locks firmly into the main unit, at  
one time, insert the right side of the  
front panel into the main unit .  
3. put it in the protective case for safe  
keeping.  
PROTECTIVE CASE  
FRONT PANEL  
3. Push it back to the position for playing  
REPLACING THE FRONT PANEL  
1. First, insert the left side of the front  
panel into the main unit.  
Bulge  
Bulge  
Hollow  
Hollow  
-6-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRIC CONNECTION  
WIRING CONNECTION  
RCA cable/output  
rear (optional)  
RCA cable  
RCH RED  
FRONT RCA RED R  
VIDEO OUT 1 YELLOW  
FRONT RCA WHITE L  
LCH WHITE  
GREY SUBWOOFER  
VIDEO OUT 2 YELLOW  
COAXIAL OUT BROWN  
RCA cable/output  
front  
Radio antenna jack  
RED  
IGNITION SWITCH(B+)  
YELLOW  
BLACK  
CHOKE  
BOX  
MEMORY BACK-UP(B+)  
GROUND(B-)  
(B+)12V  
REAR CAMERA SWITCH  
BROWN  
ORANGE  
YELLOW  
(B-)PARKING BRAKE  
FUSE  
REAR CAMERA INPUT  
BLUE  
AUTO ANTENNA  
GREY  
WHITE  
FRONT  
FRONT  
Rch SPK.  
Lch SPK.  
WHITE/BLACK  
GREY/BLACK  
VIOLET  
GREEN  
REAR  
REAR  
Rch SPK.  
Lch SPK.  
GREEN/BLACK  
VIOLET/BLACK  
Note:  
the earth connection cable (parking brake B-) must be connected in order for DVD  
pictures to be played back to the monitor. If the cable has not been correctly  
connected, the message “PARKING BRAKE” appears on the monitor.  
-7-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
DVD/RECEIVER CONTROL  
15  
16  
5
PLAY/PAUSE  
POWER  
REPEAT  
MUTE  
STOP  
3
17  
19  
MO/ST  
ANGLE  
ZOOM  
7
2
20  
21  
MENU  
LO/DX  
MODE  
EQ  
CLK  
1
13  
6
OSD  
BAND  
TITLE/PBC  
A/PS  
VOL  
23  
ENTER  
14  
18  
9
22  
TOP  
1
12  
26  
INT  
2
5
3
VOL  
RDM  
4
11  
4
6
9
0
24  
25  
SEL  
7
8
10  
8
SETUP  
GOTO  
+10  
1. CLK Press it briefly to show / hide the  
clock, press longer to set the time.  
6. LO/DX(  
)
Changing of the  
SUBTITLE language on multi-subtitle  
language DVD disc. In radio mode,  
Press this button for distance reception  
when you are located at weak signal  
location, depress it for stronger signal.  
2. MODE Press it to change between  
RADIO ,DISC and AUX IN mode.  
3. STOP Press it to stop playback, press  
PLAY/PAUSE to resume playback .  
7. REPEAT/  
of DVD/VCD/CD/MP3 disc.  
Switch the Repeat mode  
4. SETUP Press it to open the SETUP  
menu.  
8.GOTO Press this button to begin  
playback at a moment in the program you  
designate. Use the number buttons to  
enter the data that is needed.  
5.MO/ST(  
) In radio mode, press it  
to select STEREO or MONO mode (In disc  
mode, press it to changing of the AUDIO  
soundtrack on multiaudio soundtrack  
DVD disc. Changing of the sound mode of  
the VCD/CD disc.)  
-8-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
9.  
track & press  
(Note: In DVD mode, press continually  
the twice to skip back one track.)  
/
Press  
to skip to the next  
to skip back one track.  
20. ANGLE Changing of the view angle  
on multi-angle DVD disc.  
21. EQ Press it to turn to equalization  
function.  
10. SEL Press this button repeatedly to  
cycle through the various audio and video  
adjustments you can make: Such as  
Volume, Bass, Treble, Balance, Fader,  
Color, BG Color, Brightness, etc .  
22.  
rapidly &  
/
Press to start forward  
to reverse rapidly.  
23. ENTER Confirm the Track/Chapter  
selected with the number key or selected  
with the cursor buttons on TV screen.  
11. VOL+/VOL- Press it to adjust volume  
level .  
12.  
/
/
/
Use these buttons to  
24. RADIO PRESET Six preset memory  
buttons.  
navigate the various menus present in the  
product.  
25. 0 - 9 Numeric buttons. In radio mode,  
0 and 9 act as TA/AF.  
13. MENU/SUBWOOFER( ) Press it to  
display the root menu of the DVD disc.  
Press it longer to switch the Subwoofer  
ON and OFF.  
26. +10 Tens digit select button,  
cooperatively used with numeric buttons.  
14. BAND(OSD) In Radio mode, press  
this button repeatedly to switch between  
the five radio bands .  
In Disc Playback modes, Press this  
button to see information about the disc  
currently in play.  
15. POWER ( ) Press it to turn on the  
unit , press it again to turn off.  
16. PLAY/PAUSE(  
) In DISC mode,  
starting playback, stopping picture/track.  
In Radio mode, PTY selection of the  
program type.  
17. MUTE Press this button to turn off the  
audio. Press again to restore the sound  
to its prior volume level.  
18. TITLE/PBC (A/P) Display the TITLE  
menu that is stored in DVD disc changing  
between PBC ON and PBC OFF on the  
VCD disc.(Auto store and preset scan  
function in radio stations .)  
19. ZOOM Allows the picture to be  
increase in size .  
-9-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
USING THE REMOTE CONTROL  
PREPARING THE REMOTE  
CONTROL  
1. Face the remote control towards the  
player front face IR mark (remote control  
signal receiver).  
Inserting the Batteries  
1. First push to inside as the direction  
indicated by the arrow (See  
1
)and then  
2. Operation angle: About 30 degree  
in each the direction of the front of the  
IR mark.  
Remove the battery holder as the  
2
direction indicated by the arrow (See  
).  
2. Replace the battery Set a new battery  
property with (+)side up as illustrated  
3
(See  
).  
3. Insert the battery holder. Push in the  
holder to the original position(See ).  
4
-10-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
1
3
4
12  
19  
9
6
14  
CAR DVD/VCD/CD/MP3 PLAYER WITH MPEG4  
SEL  
CLK  
TA/AF  
OPEN  
COMPACT  
E
O
N
10  
18  
DIGITAL VIDEO  
VOL-  
BND  
5
CH 1-6  
IR  
APS  
MOD  
VOL+  
COMPACT  
DISP  
13  
DIGITAL AUDIO  
MU/PTY  
17  
AUX IN  
8
11  
16  
2
7
15  
4. SELECT Knob  
1. OPEN Button  
To access the available adjustment  
settings for audio and video, press this  
knob repeatedly to cycle through and  
select them :  
Press it to flip down the front panel , then  
you can insert the CD disc into the CD  
compartment. You can also press the  
Eject button(14) to eject the disc.  
Volume - Bass - Treble - Balance -  
- Fader - Tint - Contrast - Bright - Color -  
BG Color .  
2. (POWER On/Off) BUTTON  
Press this button to switch the device  
On, WELCOME appears in the display.  
Press it again to switch the device Off,  
SEE YOU appears in the display.  
The settings of the individual menu items  
are changed by turning the multifunction  
button VOL (3)  
5. BAND Button  
3. VOL Multifunction Button  
In normal mode, this knob is used to  
increase or decrease the volume.  
If the SEL knob is pressed beforehand,  
changed can be made in the menus,  
e.g. Sound mode .  
In Radio mode, press this button repeat-  
edly to cycle through and select the  
desired radio band, the designation of  
the corresponding level- FM1, FM2, FM3,  
AM1(MW1), AM2(MW2)- is shown in the  
TFT.  
-11-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
7.APS/DISP Button  
Automatic Memory Function:  
6.TA/AF BUTTON  
TA Function [traffic Announcement]  
Button(for Rds Only)  
In RADIO mode  
When you press the TA/AF button, the  
TA function is activated, the TA symbol  
appears in the display .  
In Radio mode, press and hold the  
APS/DISP button for about 2 seconds to  
active automatic station storage. The  
radio searches within the current frequ-  
ency band, e.g. FM1, for the strongest  
station are then allocated to the corres-  
ponding storage locations. Then the sta-  
tion of the first storage location is set. If  
you would like to search for more stations  
in the FM band, press the BND button(5)  
in order to change to the FM2 or FM3  
band. Press it longer again for about 2  
seconds to continue search.  
( press it again to turn off . )  
During radio operation in one FM frequ-  
ency band the search for a traffic annou-  
ncement station is started automatically  
(TA SEEK) . If an FM station is being  
received which transmits the latest traffic  
announcements from time to time, the TP  
display lights up.  
If an FM station is being received which  
transmits the latest traffic announceme-  
nts automatically interrupt CD operation  
(the word TRAFFIC appears in the dis-  
play).  
The volume level is increased to the  
minimum value for the transmission of  
traffic announcements. After the traffic  
announcements has finished, the prog-  
rame that was previously running is  
resumed.  
Program Scan Function:  
In Radio mode, press it briefly to scan  
and play all the preset sations in order,  
and it will hold at each band for about 5  
seconds . If you like one of them, press  
the PLAY/PAUSE button to stop the  
scanning .  
Display ON/OFF Function:  
In Disc mode, press the APS/DISP  
button briefly to turn off the display  
image (the monitor on the unit only) , the  
sound will stay on. (Press it again to  
resume the playback picture mode.)  
You can press SEL knob briefly to select  
the “BG COLOR” by repeatedly pressing  
the SEL knob, then rotate the VOL+/- to  
select the background color among of  
the “AUTO, BG COLOR: 01........  
BG COLOR: 11”, in “ AUTO” mode, the  
monitor of unit will change the  
AF [Alternative Frequencies]  
When press and hold the TA/AF button  
more than 2 seconds, it is activated as  
AF mode ON or OFF .  
Segment off: AF switching mode off.  
Segment on: AF switching mode on, the  
radio continuously tests the signal stren-  
gth of the AF frequency. Whenever the  
new AF frequency is stronger than the  
station that is currently tuned in, the  
radio switches to this frequency for a  
short time and the message “NEW  
FREQUENCY” is displayed for one to  
two seconds.  
background color automatically.  
Segment flashing: AF switching mode is  
selected, but RDS information is not  
received yet.  
When press the SEL button for a longer  
time to access the selection menu:  
REG ON/ REG OFF, PI MUTE/PI SOUND,  
AF OFF/ AF ON.  
8.MUTE/PTY Button  
Press this button to turn off the audio.  
Press again to restore the volume to the  
prior level. You can also disable the  
MUTE function by turning the VOL +/-  
knob.  
In Radio Mode, press this button and  
hold for a bout 2 seconds to select the  
PYT of the grogram type (examples of  
such types of program are : NEWS,  
POP.....)  
Regional mode ON  
PI CODE is checked when AF CHECK in  
progress  
Regional mode OFF  
PI CODE and COVERAGE AREA is not  
checked when AF check in progress.  
-12-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
9.CLK Button  
DVD/VCD/CD/MP3:  
Press it to change the display to clock  
display. Press it again to return to  
previous display. In clock display, press  
and hold for about 2 seconds until the  
hour display flashes, rotate VOL+/-  
button to adjust hours . Press it again,  
the minute display flashes , rotate  
VOL+/- button to adjust minutes.  
Normal Playback 2x  
4x  
8x  
16x  
b) In Radio Mode:  
Press briefly the  
ally tune the radio in single steps. Press  
and hold for two seconds to start the  
search for a radio station automatically.  
or button to manu-  
10.  
a). In Disc Playback Mode  
Press this button to pause playback,  
press it again to resume playback.  
B). In Radio Mode  
Press this button repeatedly to preset  
station. With this system a total of 30  
stations can be stored in the memory .  
Each band store up to six preset stations.  
The stations might be FM1, FM2, FM3,  
AM1 (MW1) and AM2 (Mw2) band.  
The operation as below:  
/CH 1-6 (RADIO PRESET)  
13. MOD BUTTON  
Press it repeatedly to select AUX IN ,  
RADIO and DISC mode. During the USB  
playback, you can press STOP button  
and then press GOTO button to select  
the DISC mode.  
14. (EJECT) Button  
In DISC playing ,Press the Open button  
(1) to flip down the front panel, then you  
can press the this button to eject the disc .  
- store in memory  
15. RESET Button  
press and hold the desired memory  
location for several seconds, the current  
listening station will be stored into the  
number location.  
RESET button is placed on the housing  
and must be activated with either a  
ballpoint pen or thin metal object. The  
RESET button is to be activated for the  
following reasons:  
A. Initial installation of the unit when all  
wiring is completed.  
B. All the function buttons do not operate.  
C. Error symbol on the display.  
- retrieve a preset station  
press it button repeatedly to retrieve  
a station which had been stored in the  
memory in advance the chosen  
number is shown on display.  
11/12 .  
(tune, Seek, Track, Skip Up/down)  
/
Buttons  
16. IR sensor  
17. AUX INPUT JACK  
For information about using an AUX IN  
audio source, please see page 15.  
a) In DISC, USB mode:  
if you wish to jump forwards or back-  
wards press briefly the  
(Note: during the DVD playback , press  
the button continually twice to skip  
back one track during playback.)  
Press and hold up for more than two  
seconds to begin Fast Forward (or down  
for Fast Reverse) mode. Press the  
button again as needed, to cycle thru the  
range of available speeds.  
or  
button .  
18. USB PORT  
For information about connecting a  
USB device, please see page 17.  
19. TFT Display  
(liquid crystal display)  
The operation of the TFT, please see  
page 16.  
-13-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
In VCD playback mode, press and hold  
this button to display the following menu:  
ADDITIONAL FUNCTIONS ONLY  
PRESENT ON REMOTE CONTROL  
SELECT DIGEST TYPE:  
TRACK DIGEST  
DISC INTERVAL  
1/TOP BUTTON  
In VCD, CD or MP3 playback mode,  
pressing this button will select and  
play the first track or chapter on the  
disc. (Please note: this button does  
not have this function in DVD mode .)  
TRACK INTERVAL  
Use the UP, DOWN, LEFT and RIGHT  
arrows on the remote to select an item ,  
and press ENTER to confirm .  
REPEAT BUTTON  
In DVD playback mode, press and hold  
this button to display the following menu:  
Pressing the repeat button repeatedly  
allows you to cycle through and select  
one of the REPEAT modes available  
as follows :  
SELECT DIGEST TYPE:  
TITLE DIGEST  
CHAPTER DIGEST  
TITLE INTERVAL  
CHAPTER INTERVAL  
DVD:  
CHAPTER REPEAT ON  
TITLE REPEAT ON  
REPEAT ALL  
Use the UP, DOWN, LEFT and RIGHT  
arrows on the remote to select an item ,  
and press ENTER to confirm .  
VCD/CD/MP3:  
REP-ONE  
REP-ALL  
4/RANDOM BUTTON  
1). Continuously repeat at the current  
chapter/track, when selected  
REP-ONE mode.  
2). Select REP-ALL mode to continuo-  
usly repeat all chapter/track on the  
current disc.  
In Disc playback mode, press this  
button to begin playback of all the  
tracks on the disc in RANDOM order .  
To return to normal playback mode,  
press it again .  
3). REPEAT feature does not support  
VCD2.0 (with PBC ON).  
3/INT BUTTON  
In CD playback mode, press this button  
to start the intro Scan Function .  
The player will play the first six seco-  
nds of a track and then skip to the next  
and do the same, and so on .  
If you hear a song you wish to continue  
listening to, press the button again .  
(Please note : this button does not  
have this function in MP3 playback  
mode.)  
-14-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
MP3/WMA/JPEG/MPEG4 PLAYBACK  
Fast Forward/ Fast Reverse Playback  
In playback mode, press and hold (for  
When you insert a disc which contains  
MP3, WMA or JPEG files, the different  
file types are detected, and a list of the  
files are produced, as shown in the  
diagram below :  
More than two seconds) the  
on front panel to move to FAST  
FORWARD or FAST REVERSE play .  
You can also briefly press the or  
/
button  
button on remote control to accomplish  
this .  
4
6
5
Repeat one  
00:56  
04:07  
3
2
AUX OPERATION  
003/112  
On the front panel of the unit, there is an  
AUX IN jack, Following the diagram  
below to connect analogue replay  
devices. Use this jack to replay sound  
of other replay equipment such as  
DVD players, computers, etc. Via the  
loudspeakers.  
Mp3  
K
P
Mp3  
Mp3  
1
1
woman  
ton  
..........n..e.w.  
1). Please connect the external device  
with stereo jack plug the Aux in socket .  
1 .Current track(file)(highlighted bar)  
.Current track (file) number/total  
number of tracks(files) in the current  
folder.  
2
.Elapsed playing time of the current  
track(not available for JPEG disc)  
.total playing time.( not available for  
JPEG disc)  
3
4
AAUUXX IINN  
.Selected playback mode  
.Operation mode icon.  
5
6
(Play),  
2). Press the MOD button to select the  
AUX IN connection .  
(stop), (pause), (forward)  
(reverse).  
3). Use the VOL+/- button you can  
change the volume level .  
Use  
/
/
/
on the remote control to  
select the item or folder, and press the  
ENTER button to confirm , then select  
the desired the track to play .  
SCROLL CAPTION ADJUSTMENT  
In Radio mode:  
You can adjust the desired scroll caption,  
the method of the operation as follow:  
a). Press and hold the SETUP button  
(for about 2 seconds) on the remote  
control, the adjustment scroll bar will  
display on the screen .  
Pressing REPEAT button repeatedly  
can select repeat play mode.  
REP-ONE:  
Play the same song over and over again.  
REP ALL:  
Play all songs on the disc, then repeats  
the entire disc over and over again .  
b). Use the VOL+/- to select among of  
the “A, B, C ....X, Y, Z, and blank ”, and  
use the  
/
button on front panel to  
SKIP AHEAD / BACK  
In playback mode, press the  
buttons on remote to skip ahead or back  
one item in the list .  
ahead/back (proceed/cancel), and then  
press the setup button briefly to confirm .  
(Press it longer again to renew . )  
or  
-15-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
NOTE(For The Brake Function)  
VIDEO QUALITY ADJUSTMENT  
if the parking brake is not engaged,  
“parking brake” flashes on the monitor,  
and no playback picture will be shown.  
Only the audio will be heard.  
-This warning appears only when the  
parking brake wire is connected to the  
parking brake system built in the car.  
In any video display mode, briefly press  
SEL knob repeatedly to cycle through  
and select the various audio and video  
parameters you may wish to adjust :  
(such as volume, bass, treble, balance,  
fader, color, bright, contrast, tint ,  
BG color and Bluetooth . Then rotate the  
VOL + / - to adjust the selected mode.  
(The corresponding value will show on  
the display.)  
ALTERNATE AUDIO/VIDEO SOURCE  
Volume  
Bass  
Treble  
Balance  
Fader  
On the front panel of the unit , there is an  
AUX IN jack, to connect analogue replay  
devices. Use this jack to replay sound of  
other replay equipment such as  
DVD players, computers, etc.  
Tint  
Contrast  
Bright  
Color  
Via the loudspeakers.  
The video adjustments are made using a  
scale of 0-32 .  
1). Please following the diagram below,  
connect the external device with stereo  
jack plug the AUX IN socket .  
2). Press the MOD button to select the  
AUX IN connection.  
Adjustable Items:  
COLOR: 0 to 32  
Adjust the color fo the picture-lighter or  
darker.  
BRIGHT: 0 to 32  
3). Use the buttons on the external  
device to operate it .  
Adjust if the picture is too bright or too  
dark.  
CONTRAST: 0 to 32  
Adjust the contrast of the bright and dark  
portion.  
TINT: 0 to 32  
Adjust the tint if the human skin color is  
unnatural.  
AUX IN  
-Adjustable when “NTSC “ is selected for  
“NTSC/PAL “ .  
Headphones  
port  
Rear View Camera  
When connecting the rear view camera.  
the mirror image of the rear view through  
the rear view camera is automatically  
displayed on the monitor when you  
change the gear to the back position.  
(The monitor on the unit only.)  
-16-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
USB OPERATION  
Following the diagram below, connect  
your USB device to the front panel  
USB port . If it is properly connected,  
the device will be mounted and start  
playing automatically.  
On-Screen Display Function  
Press the OSD button during playback  
to display information about the current  
disc . Pressing repeatedly will show you  
different data, as shown below . In this  
example, we are looking at the contents  
of a DVD disc .  
A.Example for DVD:  
a.Press OSD for the first time:  
USB port  
TITLE ELAPSED  
TT 01/01 CH 01/38  
0:02:06  
In USB Playback mode  
b.Press OSD for the second time:  
Use the UP, DOWN, RIGHT or LEFT  
buttons to navigate to and select files  
to play, and press ENTER to begin  
playback (or viewing, in the case of  
JPEG files). To skip to the next or  
TITLE REMAIN  
TT 01/01 CH 01/38 3:24:36  
c.Press OSD for the third time:  
last track, press the  
Press the or buttons for Fast  
or  
buttons.  
CHAPTER ELAPSED  
TT 01/01 CH 01/38 0:02:56  
Forward or Fast Reverse playback.  
REPEAT play modes are also available  
by repeatedly pushing REPEAT until  
the desired mode is found.  
d.Press OSD for the fourth time:  
CHAPTER REMAIN  
TT 01/01 CH 01/38 0:04:32  
Changing From USB to DISC Playback  
Modes  
If you are in USB Playback mode and  
wish to begin playback of a disc already  
in the player, press the STOP button  
once. Then press the GOTO button  
and the player will switch to DVD/VCD/  
CD/MP3 Playback mode.  
e.Press OSD for the fifth time:  
The message on the screen will be  
cleared.  
B.Example for VCD/SVCD/CD:  
a.Press OSD for the first time:  
Changing From DISC to USB Playback  
Modes  
SINGLE ELAPSED  
If the disc present in the player is an  
MP3 disc, press the STOP button once  
and press the GOTO button to USB  
playback. If the disc present in the  
player is an DVD or VCD or CD disc,  
press the STOP button twice and press  
the GOTO button to USB playback.  
TRACK 01/16  
00:49  
b.Press OSD for the second time:  
SINGLE REMAIN  
TRACK 01/16  
02:45  
c.Press OSD for the third time:  
TOTAL ELAPSED  
IMPORTANT NOTE:  
TRACK 01/16  
00:60  
to prevent damage to the USB device,  
do not remove or disconnect it during  
playback. it is also a good practice to  
remove the USB drive during disc  
playback.  
d.Press OSD for the fourth time:  
TOTAL REMAIN  
TRACK 01/16  
78:46  
-17-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
Notes:  
- The language number is different  
according to the disc.  
- Some discs only contain one subtitle  
language.  
- When no different subtitle language  
e.Press OSD for the fifth time:  
The message on the screen will be  
cleared for SVCD and VCD.  
C.Example for MP3:  
Each time OSD is pressed, the message  
displayed on screen changes as follows:  
are recorded, will be displayed  
at screen left top corner.  
SINGLE ELAPSED  
SINGLE REMAIN  
Multi-angle Function  
(for DVD Only)  
Multi-audio Language Function  
For DVD:  
Press ANGLE during playback. Each  
time the button is pressed, number of  
the angle changes in sequential order.  
Notes:  
- The angle number is different  
according to the disc.  
- The function only work for disc having  
scenes recorded at different angles.  
- When no different angle are recorded,  
will be displayed at screen left top  
corner.  
Press AUDIO during playback.  
Each time the button is pressed,  
number of the audio soundtrack  
language changes on sequential order.  
NOTES:  
- The language number is different  
according to the disc.  
- Some disc only contain one language  
soundtrack  
- When no different language  
soundtrack are recorded  
will be  
display at screen left top corner.  
For VCD/CD:  
Press AUDIO during playback. It is  
possible to switch the sound between  
monaural and stereo sound.  
MONO LEFT  
MONO RIGHT  
MIX-MONO  
STEREO  
Title Menu Function  
For DVD:  
If the DVD has multiple titles recorded  
on the disc. It can select preferred title  
from the title menu to start playback.  
- Press TITLE during playback.The title  
menu is display.  
- Press the cursor button shown in TV  
screen, select preferred title by the  
cursor button and confirmed by  
ENTER key.  
For VCD:  
Press TITLE/PBC button on the remote  
control while the disc is playing, you can  
switch between "PBC on"and "PBC off"  
mode.  
Multi-subtitle Language Function  
(for DVD Only)  
Press SUBTITLE during playback.  
Each time the button is pressed, number of  
the subtitle language changes in  
sequential order.  
-18-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
ABOUT SETUP MENUS  
--- GENERAL PAGE ---  
DOLBY  
DOLBY  
-----General setup page----  
-----General setup page----  
TV Display  
Normal/PS  
Normal/LB  
Wide  
TV Display  
LB  
ON  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
ENG  
SPDIF/RAW  
ON  
Screen Saver  
Last Memory  
Screen Saver  
Last Memory  
ON  
ON  
Set TV Display Mode  
Go To General Setup Page  
TV Screen  
Video  
Material  
Press SETUP button on the remote  
control to display the SETUP menu ,  
Select the preferred item by using the  
Wide(16:9)  
Pan Scan  
Normal  
Letter-box  
4:3  
/
/
/
buttons, and press the  
ENTER button to confirm.  
When you press SETUP on the remote  
control, the SETUP screen will be  
displayed. At the top of the screen are  
four icons, representing:  
1.TV DISPLAY SETUP  
This is to select the appropriate TV  
aspect (4:3 or 16:9) according to the  
connected TV set.  
Overview Of The Main Menu  
Normal/PS (For 4:3 TV)  
Played back in the PAN & SCAN style.  
(If connected to wide-screen TV, the  
left and right edges are cut off.)  
Normal/LB (For 4:3 TV)  
DOLBY  
(1)  
(2)  
(3)  
(4)  
(1). GENERAL SETUP  
(2). SPEAKER SETUP  
(3). DOLBY DIGITAL SETUP  
(4). PREFERENCES SETUP  
Use the LEFT or RIGHT arrow button  
to select the desired setup menu and  
press ENTER to confirm.  
In the following description, we begin  
with the GENERAL SETUP menu.  
Played back in letterbox style.  
(If connected to wide-screen TV, black  
bands appear at top and bottom of the  
screen.)  
Wide (For 16:9 TV)  
Select when a wide-screen TV set is  
connected.  
-19-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----General setup page----  
TV Display  
ON  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
Osd Lang  
OFF  
SPDIF OFF  
SPDIF/RAW  
SPDIF/PCM  
Spdif Output  
Captions  
Screen Saver  
Last Memory  
Set Angle Mark  
Screen Saver  
Last Memory  
Setup SPDIF  
2.ANGLE MARK DISPLAY SETUP  
If it is set to ON, when the multi-angle  
4.SPDIF OUTPUT  
This is to activate the audio output  
from SPDIF OFF mode to SPDIF/RAW  
mode to SPDIF/PCM mode.  
DVD disc is playing,  
(the angle  
mark) will appears on the screen; if is  
set to OFF, the mark will not appear.  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----General setup page----  
TV Display  
English  
French  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
OSD Lang  
German  
Spanish  
Italian  
ON  
Spdif Output  
OFF  
Captions  
Screen Saver  
Last Memory  
Screen Saver  
Last Memory  
Closed Caption  
Portuguese  
Set OSD Language  
5.CAPTIONS SETUP  
3.OSD LANG TYPE SETUP  
Select the preferred OSD language  
Activate the CAPTIONS feature by  
selecting ON. And release this feat-  
ure by selecting OFF.  
by using the  
/
buttons.  
-20-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
SPEAKER SETUP  
--- SPEAKER SETUP PAGE ---  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----Speaker Setup Page----  
Angle Mark  
OSDLang  
Spdif Output  
Captions  
DOWNMIX  
LT/RT  
STEREO  
ON  
Screen Saver  
Last Memory  
Screen Saver  
OFF  
Set Downmix Mode  
This is to activate the audio output from  
DOLBYAC3 5.1 DOWNMIX to 2 channel  
mode. Select the preferred SPEAKER  
connection by using the cursor buttons.  
Select the LT/RT to activate the Dolby  
surround compatible output.  
6.SCR SAVER SETUP  
Select the SCR SAVER output  
ON/OFF.  
Select the STEREO to activate simple  
stereo mode.  
DOLBY  
DOLBY DIGITAL SETUP  
DOLBY  
-----General setup page----  
TV Display  
-----Dolby Digital Setup----  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
FULL  
6/8  
DYNAMIC  
4/8  
2/8  
ON  
Screen Saver  
OFF  
OFF  
Last Memory  
Set Last Memory State  
Set DRC OFF  
DYNAMIC RANGE CONTROL  
Select DRC and adjust the dynamic  
range of a Doby Digital encoded  
7.LAST MEMORY SETUP  
Select the LAST MEMORY output  
ON/OFF.  
program. There are 8 steps between  
full compression and off compression.  
-21-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
PREFERENCES SETUP  
--- PREFERENCES PAGE ---  
DOLBY  
DOLBY  
-----Preference Page----  
-----Preference Page----  
TV Type  
PAL  
TV Type  
English  
French  
Spanish  
German  
AUTO  
NTSC  
Audio  
Audio  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Italian  
Portuguese  
OFF  
Set TV standard  
Preferred Subtitle Language  
1.TV TYPE SETUP  
3.SUBTITLE LANGUAGE SETUP  
Select the preferred SUBTITLE  
language by using the cursor buttons.  
This player can play discs recorded  
in either PAL or NTSC format.Select  
NTSC format, when you connected to  
NTSC TV.Select PAL format, when  
you connected to PAL TV.Select AUTO  
format, the player TV output format  
will according to the DVD disc format..  
DOLBY  
DOLBY  
-----Preference Page----  
TV Type  
-----Preference Page----  
TV Type  
Audio  
English  
English  
Audio  
French  
Subtitle  
French  
Disc Menu  
Parental  
Password  
Default  
Spanish  
German  
Italian  
Subtitle  
Spanish  
Disc Menu  
German  
Parental  
Italian  
Portuguese  
Password  
Portuguese  
Default  
Preferred Menu Language  
Preferred Audio Language  
4.DISC MENU LANGUAGE SETUP  
Select the preferred DISC MENU  
language by using the cursor  
buttons.  
2.AUDIO LANGUAGE SETUP  
Select the preferred AUDIO sound-  
track by using the cursor buttons.  
-22-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
DOLBY  
DOLBY  
-----Preference Page----  
-----Preference Page----  
TV Type  
1KID SAF  
2G  
TV Type  
Audio  
Audio  
3PG  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Subtitle  
4PG13  
5PGR  
6R  
Disc Menu  
Parental  
Password  
Default  
7NC 17  
8 ADULT  
OFF  
RESET  
Load Fcatory Setting  
Set Parental Control  
7.DEFAULTS  
Select reset to become factory initial  
setting.  
5.PARENTAL  
Select suitable parental guidance by  
the cursor buttons and conformed by  
pressing ENTER button.  
DEFAULTS TABLE  
DOLBY  
TV DISPLAY  
NORMAL/LB  
ON  
-----Preference Page----  
TV Type  
ANGLE MARK  
OSD LANGUAGE  
ENGLISH  
SPDIF/RAM  
ON  
GENERAL SETUP  
Audio  
SPDIF OUPUT  
CAPTIONS  
Subtitle  
Disc Menu  
Parental  
SCR SAVER  
ON  
LAST MEMORY  
ON  
DOWNMIX  
SPEAKER SETUP  
DOLBY DIGITAL  
STEREO  
OFF  
Password  
Default  
CHANGE  
DYNAMIC  
TV TYPE  
AUDIO  
AUTO  
ENGLISH  
OFF  
Change Password  
SUBTITLE  
6.PASSWORD  
DISC MENU  
Select the change and press ENTER  
button. Type the old password (The  
initial factory code is 1379) and key  
in 4 characters password now you  
want to use, and retype again to  
confirm key in correctly.  
PREFERENCES  
ENGLISH  
8 ADULT  
1379  
PARENTAL  
PASSWORD  
-23-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION  
Supply Voltage:  
Current Consumption:  
Signal System:  
12V DC (11V-15V)  
Less than10 A  
Compositive video 1.0Vp-p 75  
(1)DVD-VIDEO Disc  
Discs Played:  
5"(12 cm) single-sided, single-layer  
5"(12 cm) single-sided, double-layer  
(2)Compact Disc (CD-DA, VIDEO CD)  
5"(12cm) disc  
Audio Signal Output:  
Characteristics:  
2ch&4ch line out  
(1)Frequency Response  
(2)S/N Ratio  
20 Hz - 20 KHz  
90 dB (JIS)  
(3)Wow and Flutter  
Below measurable limits  
For 3 Bands  
(Europe)  
FM  
For 2 Bands  
For 2 Bands  
(U.S.A.)  
FM  
(Europe)  
FM  
Frequency Coverage:  
IF:  
87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz  
10.7 MHz  
10.7 MHz  
15 dBu  
MW  
10.7 MHz  
15dBu  
AM  
Sensitivity (S/N = 30 dB): 15 dBu  
MW  
Frequency Coverage:  
IF:  
522 to1620 KHz 522 to1620 KHz 530 to1710 KHz  
450 KHz  
450 KHz  
40 dBu  
450 KHz  
40 dBu  
Sensitivity (S/N = 20 dB): 40 dBu  
LW(Optional)  
Frequency Coverage:  
IF:  
144 to290 KHz  
450 KHz  
Sensitivity (S/N = 20 dB): 45 dBu  
Monitor Screen Size:  
Number of Pixels:  
Color System:  
3.6 Inch Wide  
320 X RGB X 240 pixels  
NTSC/PAL  
NOTE: Specifications and design are subject to modification, without notice,  
due to improvements in technology.  
-24-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
Before going through the check list, check wiring connection. If any of the problems  
persist after check list has been made, consult your nearest service dealer.  
SYMPTOM  
CAUSE  
SOLUTION  
If the power supply is properly  
connected to the car accessory  
terminal,switch the ignition key  
to "ACC"  
The car ignition switch is  
not on  
No power  
The fuse is blown  
Replace the fuse  
Presence of disc inside the Remove the disc in the player,  
player.  
then put a new one  
Inserting the disc in reverse Insert the compact disc with  
direction  
Disc can not be  
loaded or ejected  
the label facing upward  
Clean the disc or try to play a  
new one  
The disc is extremely dirty  
or defective  
Temperature inside the car  
is too high  
Cool off or until the ambient  
temperature return to normal  
The color system is  
set incorrectly  
Television/video  
imageappears  
black-white  
Please switch to correct color  
system from menu  
Make proper connection  
The unit is not connected  
to the parking brake  
detection switch  
No television/video  
image appears  
according towire connection”  
For safety reasons no television  
/video images are displayed while  
the vehicle is moving.  
The parking brake is not  
engaged  
Engaging the parking brake will  
cause images to be displayed.  
Please the television mode of  
the choice accommodation  
The disc format is not  
accordingto the TV-set  
used (PAL/NTSC)  
No color in picture  
No JPEG files are recorded  
on the disc.  
JPEG disc can  
not be played  
back  
Change the disc  
Change the disc  
Record JPEG files using a  
compliant application  
JPEG files are not recorded  
in a compliant formant  
The built-in microcomputer Press the RESET button.  
is not operating properly  
due to noise  
The operation keys  
do not work  
Front panel is not properly fixed  
into its place  
The antenna cable is not  
connected  
The radio does not  
work  
Insert the antenna cable firmly  
The signals are too weak  
Select a station manually  
888-J3501-03S  
-25-  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lathem Home Security System 900E User Manual
Lennox International Inc Thermostat 2P1109 User Manual
Liebherr Refrigerator 220113 7082814 00 User Manual
Life Fitness Elliptical Trainer 9500RHR User Manual
Lightolier Indoor Furnishings VRA1G8LS232 User Manual
Little Wonder Blower 9502 00 01 User Manual
Lucent Technologies Server Comcode 108678723 User Manual
Magnavox DVD Player MDR513H F7 User Manual
Melissa Toaster 643 071 072 User Manual
Metrologic Instruments PDAs Smartphones SP5700 User Manual