308-145B FAQS
The links below will work in most PDF viewers and link to the topic area by
clicking the link. We recommend Adobe Reader version 10 or greater
CONTENTS
308-145B FAQS ........................................................................................................................ 1
Batteries ................................................................................................................................... 2
A/C Power................................................................................................................................. 3
Weather Station Factory Restart............................................................................................. 3
Outdoor Temperature/Humidity Transmitter.......................................................................... 3
Dashes shown for Outdoor Temperature/Humidity................................................................. 4
Channels................................................................................................................................ 6
Position Weather Station........................................................................................................ 7
Distance/Resistance/Interference........................................................................................... 8
Accuracy................................................................................................................................... 8
Outdoor Temperature............................................................................................................. 9
Weather Station........................................................................................................................ 9
How tall are the time numbers................................................................................................ 9
La Crosse Technology, Ltd.
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
A/C Power
The design of this Weather Station is to use a/c power (5-volt) as primary power source.
When operating on a/c power, batteries are optional and not required in the Weather
Station.
IMPORTANT: When operating on a/c power, to avoid interference, the backlight and USB
charging port will turn off while the Weather Station searches for the WWVB signal. The
backlight will return after the 2-10 minute search (which occurs during the late night or early
morning hours). Then the USB charging port will resume working.
Weather Station Factory Restart
FACTORY RESTART:
DISTANCE: Bring the transmitter and Weather Station together inside and place both 5-10
feet apart with nothing between them.
REMOVE POWER: Remove batteries and a/c cord from transmitter and Weather Station.
DISCHARGE ELECTRICITY: Press one of the buttons on the Weather Station at least 20
times to clear all memory. Verify that the Weather Station is blank before proceeding.
UNPOWERED 10 MINUTES: Let the Weather Station and transmitter sit with power
removed for at least 10 minutes.
WEATHER STATION: Insert 5-volt A/C power cord or install fresh alkaline batteries in the
Weather Station.
PRESS TX BUTTON: Press the TX button on the back of remote Transmitter to transmit RF
(radio frequency) signal. Keep the transmitter 5-10 feet from the Weather Station.
WAIT: Wait for 5 minutes for the outdoor temperature/humidity to appear.
CONNECTION: When RF (radio frequency) connection is established, the respective
temperature & humidity will appear on the main unit. Allow the transmitter and Weather
Station to sit together for 15 minutes to establish a strong connection.
PLACE TRANSMITTER OUTSIDE: For optimum 433MHz transmission, place the outdoor
transmitter a distance of no more than 200 feet (60 meters, open air) from the Weather
Station.
the outdoor transmitter.
Outdoor Temperature/Humidity Transmitter
Compatible Outdoor Transmitters
A TX14TH-LCD-B outdoor transmitter comes packaged with this Weather Station.
The TX14TH, TX14TH-LCD-G and TX14TH-LCD-B (433MHz) transmitters are compatible
with this Weather Station.
Quick Connect
DISTANCE: Bring the transmitter and Weather Station together inside and have both units
5-10 feet apart with nothing between them.
WEATHER STATION: Hold the CH button on the Weather Station for 5 seconds until the
temperature/humidity area starts to flash.
TRANSMITTER: Remove battery cover and press and release the TX button to send the
signal.
WAIT: Wait for 2 minutes for the outdoor temperature/humidity to appear.
La Crosse Technology, Ltd.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Power requirements
We recommend alkaline batteries for the transmitter.
You may choose to use lithium batteries for temperatures below - 20°F/-28.8°C.
Dashes shown for Outdoor Temperature/Humidity
Dashes means the connection is lost between the Weather Station and the outdoor
transmitter.
Station.
Reorientation of the Weather Station 90 degrees towards the outdoor transmitter may
provide better reception. This allows more antenna surface to face the transmitter signal.
Outdoor Temperature/Humidity changes constantly
reading additional transmitters.
The word AUTO will appear below the channel indicator when the Weather Station is set to
Press and release the CH button to settle on one channel.
Note: When first powered up it is natural for the Weather Station to search across all three
channels for up to 15 minutes for outdoor transmitters.
Occasionally a neighbor will have a compatible outdoor transmitter that is within range.
Inaccurate Outdoor Temperature/Humidity reading
The outdoor transmitter reads the environment. When mounted in the home it will read
inside temperature/humidity.
Side-by-side test: Bring the outdoor transmitter in the house and place it next to the
Weather Station for 2 hours.
Compare indoor and outdoor temperature. The temperatures should be within 4 degrees to
be within tolerance. The humidity should be within 10% to be within tolerance. See the
If the transmitter reads correctly when next to the Weather Station then try a different
location outside.
Look for heat sources such as sunlight, door or window frames, or reflected heat.
Intermittent Outdoor Temperature/Humidity
RF (radio frequency) communication may come and go occasionally. This can be normal in
some environments (e.g. moister climates). If transmitter signal is lost, please wait 2-4 hours
for the signal to reconnect on its own.
Move the outdoor transmitter to a closer location.
channel shown on the Weather Station.
La Crosse Technology, Ltd.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezer test: Confirm the Weather Station is reading the correct outdoor transmitter. Place
the transmitter in the freezer for an hour and watch the temperature drop on the Weather
Station.
10 feet apart and inside to establish a strong connection.
After 15 minutes if there is a reading in the outdoor temperature area, move the transmitter
to another room with one wall between the transmitter and the Weather Station. Observe to
see if the temperature/humidity remains on consistently for 1-hour.
If the temperature/humidity remains on while in the house then it is likely a
distance/resistance issue. Move the transmitter to different locations outside to find a
location where the temperature/humidity reading will hold.
Outdoor Temperature/Humidity is stuck or OFL
The last outdoor reading may remain (not change) for several hours when connection is lost.
The outdoor temperature/humidity reading will flash when the connection is first lost or
intermittent between the Weather Station and the outdoor transmitter.
Replace outdoor transmitter.
Outdoor transmitter fell and no longer works
If there is no physical damage to the outdoor transmitter, the fall may not have caused
internal damage.
An outdoor transmitter that has fallen into a puddle or other standing water or snow may
have water damage.
Transmitters are water resistant, not waterproof.
A fall can shock the transmitter or the batteries in the transmitter. Batteries that have fallen
on a hard surface may be damaged and unable to function properly.
than six years from now may still work, but may be unstable in performance.
Outdoor Transmitter drains batteries quickly
Test a new set of alkaline batteries. Write down the date of installation and the voltage of the
batteries.
When the batteries fail, please note the date and voltage again.
Transmitters at the end of the range may work while batteries are fresh but not after they
drain a bit.
Check for leaking batteries, which may damage the transmitter.
Battery life is over 24 months when using reputable battery brands for both Alkaline and
Lithium batteries.
MIN/MAX Temperature readings
This Weather Station will show the daily minimum and maximum temperatures starting at
midnight (12:00 AM).
The Weather Station will automatically reset the min/max temperatures at midnight (12:00
AM).
You can manually reset the MIN/MAX data at any time.
La Crosse Technology, Ltd.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEW MIN/MAX:
MAX: From a normal display press and release the MIN/MAX button once to view maximum
temperature and humidity values for indoor and outdoor data. The word MAX will appear
next to the indoor and outdoor temperature.
MIN: From a normal display press and release the MIN/MAX button once to view minimum
temperature and humidity values for indoor or outdoor data. The word MIN will appear next
to the indoor and outdoor temperature.
MANUAL RESET MIN/MAX: Hold the MIN/MAX button for 5 seconds to reset all indoor and
outdoor minimum and maximum values.
the other channels.
Heat Index/Dew Point temperature
HEAT INDEX:
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot
it feels to a human being. As humidity increases, the body is unable to cool effectively. The
temperature will feel warmer.
VIEW HEAT INDEX: From a normal display, press the HEAT/DEW button once and Heat Index
will show instead of the indoor and outdoor ambient temperature.
Note: Heat index will be the same number as the temperature until the temperature is above 80
degrees ° F (26.7° C)
DEW POINT:
Dew point is the saturation point of the air, or the temperature to which the air has to cool in
order to create condensation. The higher the dew points, the higher the moisture content of the
air at a given temperature.
VIEW DEW POINT TEMPERATURE: From a normal display, press the HEAT/DEW button
twice and Dew Point will show instead of the indoor and outdoor ambient temperature. The
words Dew Point will show near the indoor and outdoor temperatures.
Note: Dew Point is lower than the actual temperature.
temperature on the other channels.
Channels
selection (CH) button on the Weather Station allows you to see the temperature in various
locations: outdoors, baby’s room, greenhouse, basement, etc.
Press and release the CH button to view channel 1, 2 or 3 on the display when multiple
transmitters are used.
Note: You cannot change channels if only one transmitter is connected.
CHANNEL SCROLL- Press and release the CH button until you see the word AUTO appear in
the outdoor data area. The display will automatically rotate through the channels for all
connected transmitters.
Press and release the CH button to lock the display into one channel.
Then view channels individually with a press of the CH button.
La Crosse Technology, Ltd.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Multiple Outdoor Transmitters
To connect multiple remote transmitters to the Weather Station:
Remove the battery cover from all the transmitters (leave off for setup).
Set the first outdoor transmitter to channel 1 and insert 2-AA batteries.
Set the second outdoor transmitter to channel 2 and insert 2-AA batteries.
Set the third outdoor transmitter to channel 3 and insert 2-AA batteries.
Press and hold CH button on Weather Station until a beep sounds.
The Weather Station will search for all outdoor transmitters.
Press the TX button on the back of each outdoor transmitter to transmit RF (radio frequency)
signal.
When RF (radio frequency) connection is established, the respective temperature & humidity
of the selected channels will appear on the main unit.
Allow the transmitters and the Weather Station to stay 5-10 feet apart for 15 minutes to
establish a solid connection.
Install the battery covers on each sensor.
display.
transmitters are used.
Mounting/Positioning Outdoor Transmitter
Mount outdoor temperature/humidity transmitters vertically and under a bit of an overhang.
Protect the outdoor transmitter from standing rain or snow, and from the overhead sun,
which can cause it to read incorrectly. Mounting under an eave or deck rail works well.
Construct a small roof or box for the transmitter if you do not have an overhang. Please be
sure it is well vented.
Mount the transmitter on the North side to prevent sun from causing incorrect readings.
Mount at least 6 feet in the air for a strong RF (radio frequency) signal.
Outdoor transmitters are water resistant but not water proof.
Avoid more than 1 wall between the transmitter and the Weather Station.
with the signal.
RF (radio frequency) signals do not travel well through moisture or dirt.
Place the outdoor transmitter and the Weather Station in the desired shaded locations, and
wait approximately 1-hour before permanently mounting the transmitter to ensure that there
is proper reception.
MOUNT
an overhang for accuracy.
Install one mounting screw into a wall leaving approximately ½ inch (12.7mm) extended.
Place the transmitter onto the screw, using the hanging hole on the backside.
Gently pull the transmitter down to lock the screw into place.
Note: Always ensure that the transmitter locks onto the screw before releasing.
Position Weather Station
The Weather Station has a wide base to sit on a desk or table.
La Crosse Technology, Ltd.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose a location 6 feet or more from electronics such as cordless phones, wireless gaming
systems, televisions, microwaves, routers, baby monitors, etc., which can prevent signal
reception.
Be aware of electrical wires and plumbing within a wall. This will interfere with RF (radio
frequency) signal reception.
The maximum transmitting range in open air is 200-feet (60 meters).
Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the
range.
For best WWVB reception, orientate the Weather Station with the front of the back facing Ft.
Collins Colorado.
Distance/Resistance/Interference
Distance:
The maximum transmitting range in open air is over 200-feet (60 meters) between the
outdoor transmitter and the Weather Station.
This range is in open air with ideal conditions.
Consider what is in the signal path between the Weather Station and the transmitter.
Consider the distance the Weather Station is located away from other electronic in the
home.
Resistance:
Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the
range.
When considering the distance between the transmitter and the Weather Station (200 feet
open air) cut that distance in half for each wall, window, tree, bush or other obstruction in the
signal path.
Closer is better.
Windows reflect the RF (radio frequency) signal.
Metal absorbs the signal and reduces the range.
Stucco is often attached to the wall with a metal mesh that absorbs the signal.
Do not mount the transmitter on a metal fence. This significantly reduces the effective range.
Interference:
Consider items in the signal path between the transmitter and the Weather Station.
Sometime a simple relocation of the transmitter or the Weather Station will correct the
interference issue.
Windows can reflect the radio signal.
Metal will absorb the RF (radio frequency) signal.
Stucco is backed by a metal mesh that holds it to the wall.
Transmitting antennas (ham radio, emergency dispatch center, airports, military base etc.)
Electrical wires (utilities, cable etc.)
Vegetation is full of moisture and reduces signal.
Dirt: Trying to receive a signal through a hill is difficult.
Accuracy
Indoor Temperature
Operating temperature range =
Accuracy ± 2 degrees Fahrenheit
Resolution = 0.1 degree F
32 F to 122 F (0C to 50C)
32 F to 122 F (0C to 50C)
La Crosse Technology, Ltd.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Indoor Humidity
Operating Temperature Range =
Operating humidity range =
Accuracy +/- 5% RH
Accuracy +/- 8% RH
Accuracy +/-12% RH
32F to 120F (0C to 50C)
1% RH to 99%
(@77oF (25oC) , 30%RH to 80%RH)
(@77oF (25oC) , 20%RH to29%RH & 80%RH to 95%RH)
(@77oF (25oC) , 1%RH to 19%RH & 96%RH to 99%RH)
Resolution = 1 % RH
Outdoor Temperature
Operating temperature range =
Accuracy ± 2 degrees Fahrenheit
Accuracy ± 4 degrees Fahrenheit
-40 F to 140F (-40C to 60C)
32 F to 122 F (0C to 50C)
-40 F to32 F (-40C to 0C) & 122 F to140 F
(50C to 60C)
Outdoor Humidity
Operating humidity range =
1% RH to 99%
Accuracy +/- 5% RH
Accuracy +/- 8% RH
Accuracy +/-12% RH
Resolution = 1 % RH
(@77oF (25oC) , 20%RH to 90%RH)
(@77oF (25oC) , 20%RH to 30%RH & 80%RH to 95%RH)
(@77oF (25oC) , 1%RH to 19%RH & 96%RH to 99%RH)
Barometric Pressure
Measure range=
Resolution=
800mb to 1100mb
1mb
23.62 inHg to 32.48 inHg
Measuring time interval: every 12 minutes
Weather Station
How tall are the time numbers
The time numbers are 0.79 inches tall.
Power requirements
This Weather Station is powered by a 5 volt a/c power adapter
Alternatively, optional 3-AA alkaline batteries may be used.
Supported times zones
This Weather Station offers seven time zones:
AST=Atlantic
EST= Eastern
CST= Central
MST= Mountain
PST= Pacific
AKT= Alaska
HAT=Hawaiian
The Weather Station is designed to work in North America.
La Crosse Technology, Ltd.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
12-Hour or 24-Hour time format
Display the time in 12-hour or 24-hour format.
Default is 12-hour time.
Fahrenheit/Celsius
Weather Station: Press and release the -/°C/°F button on the back of the Weather Station
to switch the temperature display from Fahrenheit to Celsius.
Transmitter: Press the °C/°F button on the transmitter to switch the temperature display
between Fahrenheit or Celsius.
Backlight goes out
The backlight will automatically go dark when the Weather Station is searching for a WWVB
time signal.
The backlight will return after the 2-10 minute search.
automatically during the late night or early morning hours.
Press and release the LIGHT HI/LO button to be sure the backlight was not on dim.
Hold the LIGHT HI/LO button to be sure the backlight was not off.
Check that the a/c cord is correctly inserted into the Weather Station and outlet. The
backlight will not show constantly on battery power.
Backlight
A/C adapter:
The backlight can show continuously when operating the Weather Station with the 5-volt a/c
adapter.
HIGH: The backlight is defaulted to HI (brightness) when the a/c adapter is in use.
LO: Press and release the LIGHT HI/LO button to dim the brightness of the backlight.
Press and release the LIGHT HI/LO button again to return to full strength (HIGH).
Note: When the Adapter is NOT in use, the High/Low backlight feature is not available.
OFF: Hold the HOLD ON/OFF button for 5 seconds, until the station beeps, to turn the
backlight off to sleep.
ON: Hold the HOLD ON/OFF button again until the station beeps, to turn the backlight on.
The backlight will come on at the same level (high or low) as it was set to when turned off.
Note: When the backlight is off, press any button to activate the backlight for 8 seconds, and
then it will turn off again.
Battery power:
Press and release the SNOOZE/LIGHT button and the backlight will show for 8 seconds, when
operating on batteries only.
IMPORTANT: When operating on a/c power, the backlight and USB charging port will turn off
while the Weather Station searches for the WWVB signal, to avoid interference. The backlight
will return after the 2-10 minute search (which occurs during the late night or early morning
hours). Then the USB charging port will resume working.
La Crosse Technology, Ltd.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Dashes, OFL or stuck indoor Temperature/Humidity
This is generally a power related issues.
Check that the a/c cord is correctly inserted into the Weather Station and outlet. If using
batteries in the Weather Station as well, remove them and see if the Weather Station goes
blank, indicating a faulty a/c cord.
Weather Station.
Press any button 20 times. Leave the Weather Station unpowered for 1-2 hours.
Insert a/c power cord into an outlet then into the Weather Station.
Alternatively, install fresh alkaline batteries with correct polarity.
If the indoor temperature/humidity is still dashes or OFL, the Weather Station may need to
be replaced.
Inaccurate indoor Temperature/Humidity reading
Side-by-side test: Bring the outdoor transmitter in the house and place it next to the
Weather Station for 2 hours.
Compare indoor and outdoor temperature/humidity. The temperature should be within 4
degrees to be within tolerance. The humidity should be within 10% to be within tolerance.
Look for heat sources such as sunlight, door or window frames, or reflected heat of cold.
Set time alarm
ALARM HOUR: Press and hold the ALARM button to enter alarm time setting mode. The
Alarm Hour will flash. Use the +/RCC or -/°F/°C button to set the Hour. Press and release
the ALARM button.
ALARM MINUTE: The Alarm Minutes will flash. Use the +/RCC or -/°F/°C button to set the
Minutes. Press and release the ALARM button to exit.
Activate/Deactivate time alarm
ACTIVATE:
From the time mode, press and release the ALARM button once to show Alarm Time.
With the Alarm time showing, press and release the ALARM button to activate the alarm.
The alarm icon (bell) appears when alarm is activated.
DEACTIVATE:
From the time mode, press and release the ALARM button once to show Alarm Time.
With the Alarm time showing, press and release the ALARM button to deactivate the alarm.
The alarm icon will disappear when alarm deactivates.
Snooze Alarm
When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 9 minutes.
The snooze icon Zz will flash when the snooze feature is active.
To stop alarm for one day, press AL button, while in snooze mode.
The alarm icon (bell) will remain solid.
Time is off by hours
Station has not received a WWVB time signal in the past 24-hours.
La Crosse Technology, Ltd.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Reposition the Weather Station with the front or back facing Colorado.
Check that the Time Zone selected correctly reflects your location. Adjust the time zone in
Check that the DST indicator is correct for your location (most areas observe DST so this
should be ON). Adjust the DST indicator in the Program Menu.
Forecast icons inaccurate
THIS WEATHER STATION LEARNS FORECAST OVER TIME!
Please allow 3-4 weeks for barometer calibration to generate an accurate forecast.
IMPORTANT: As the Weather Station builds memory, it will compare the current average
pressure to the past forty day average pressure for increased accuracy. The longer the Weather
Station operates in one location the more accurate the forecast icons will be.
Weather Forecast Icons: This Weather Station has 5 forecast icons that predict the weather
condition of the next 12-hours based on the change of atmospheric pressure.
Sunny
Partly Cloudy
Cloudy
Rainy
Stormy
The icons forecast the weather in terms of getting better or worse and not necessarily sunny or
rainy as each icon indicates.
The weather forecast is about 70-75% correct. As weather conditions cannot be 100% correctly
forecasted we are not be responsible for any loss caused by an incorrect forecast.
Manually Set Time/Date: Program Menu
PROGRAM MENU: The SET button will move through the program menu.
The +/RCC or -/°C/°F button will change the value.
WWVB ON/OFF: Hold the SET button 5 seconds and WWVB and the word ON will flash.
Press and release the +/RCC or -/°C/°F button to turn this to OFF if you do not wish WWVB
reception. Confirm with the SET button and move to the next item.
TIME ZONE: EST will flash. Press and release the +/RCC or -/°C/°F button to select a
different Time Zone:
·
·
·
·
·
·
·
AST=Atlantic
EST= Eastern
CST= Central
MST= Mountain
PST= Pacific
AKT= Alaska
HAT=Hawaiian
Confirm with the SET button and move to the next item.
DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and release the +/RCC
or -/°C/°F button to turn this to OFF if you do not observe DST. Confirm with the SET button
and move to the next item.
12/24 HOUR TIME: 12H will flash. Press and release the +/RCC or -/°C/°F button to select
24H. Confirm with the SET button and move to the next item.
La Crosse Technology, Ltd.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOUR: The hour will flash. Press and release the +/RCC or -/°C/°F button to select the
correct hour. Confirm with the SET button and move to the next item.
MINUTES: The minutes will flash. Press and release the +/RCC or -/°C/°F button to select
the correct minutes. Confirm with the SET button and move to the next item.
YEAR: The year will flash. Press and release the +/RCC or -/°C/°F button to select the
correct year. Confirm with the SET button and move to the next item.
MONTH: The month will flash. Press and release the +/RCC or -/°C/°F button to select the
correct month. Confirm with the SET button and move to the next item.
DATE: The date will flash. Press and release the +/RCC or -/°C/°F button to select the
correct date. Confirm with the SET button and exit the program menu
Note: The Day of the Week will set automatically once the year, month and date are set.
FAHRENHEIT/CELSIUS: Press and release the -/°C/°F button once to switch from Celsius to
Fahrenheit temperature display.
No WWVB tower icon
The Weather Station has not received a WWVB time signal in the past 24-hours.
attached.
Hold the +/RCC button to send the Weather Station on a signal search at night.
Allow up to 5 nights to receive the time signal.
IMPORTANT:
When operating on a/c power, the backlight and USB charging port will turn off while the
Weather Station searches for the WWVB signal, to avoid interference. The backlight will return
after the 2-10 minute search (which occurs during the late night or early morning hours). Then
the USB charging port will resume working.
USB charge port
The Weather Station has an integrated USB charging port (on back) that will charge devices
when the Weather Station is plugged into a power outlet.
Note: This is a power output (charging) port only. This port will not supply power to the
Weather Station.
You cannot use a USB cord from the Weather Station to your computer and operate the
Weather Station.
Note: There is not a USB cord included with the Weather Station.
Connect your existing USB charging cord for your external device to the USB charging
port on the back of the Weather Station to begin to charge. Charging times will vary.
Note: Check to be sure that your device will charge with the USB cord it came with. Many
USB cords are for data transfer only, and cannot be used for charging.
Output: 1A maximum current USB
Do NOT overload USB port
Note: Charging times will vary based on battery depletion and the individual device.
Note: Many devices may require more power to charge than provided by this Weather
Station.
La Crosse Technology, Ltd.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: When operating on a/c power, the backlight and USB charging port will turn off
while the Weather Station searches for the WWVB signal, to avoid interference. The backlight
will return after the 2-10 minute search (which occurs during the late night or early morning
hours). Then the USB charging port will resume working.
Weather Station has missing segments
This is generally a power related issues.
Weather Station.
Press any button 20 times. Leave the Weather Station unpowered for 1-2 hours.
Insert the a/c cord into the outlet first then into the Weather Station.
Alternatively, install fresh alkaline batteries with correct polarity.
Weather Station is dim
Battery Operation:
Most Weather Stations have a gray background. Place the Weather Station at eye level. Is it
still dim?
Weather Stations that sit in the sunlight can develop a cloudy film over time.
This is generally a power related issue.
Press any button 20 times. Leave the Weather Station unpowered for 1-2 hours.
Install fresh alkaline batteries with correct polarity.
A/C Power Operation:
Check that the a/c cord is correctly inserted into the Weather Station and outlet.
If using batteries in the Weather Station as well, remove them and see if the Weather
Station goes blank, indicating a faulty a/c cord.
Weather Station has distorted display
On a brand new Weather Station check for thin plastic films of printed scratch guard that
may be on the upper and lower screen of the Weather Station. This thin piece of plastic has
printed numbers for store displays.
With all power removed the Weather Station should be blank.
If numbers still appear, please check for scratch guard.
Check that the batteries and a/c cord are installed correctly.
This is generally a power related issue.
Remove batteries and a/c cord from Weather Station.
Press any button 20 times. Leave the batteries and a/c cord out of the display for 2 hours.
Insert a/c power cord into a good outlet first, then into the Weather Station.
Weather Station display is frozen
On a brand new Weather Station check for thin plastic films of printed scratch guard that
may be on the upper and lower screen of the Weather Station. This thin piece of plastic has
printed numbers for store displays. This can make the Weather Station display appear
“frozen”.
With all power removed the Weather Station should be blank.
If numbers still appear, please check for scratch guard.
Check that the batteries and a/c cord are installed correctly.
La Crosse Technology, Ltd.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
This is generally a power related issue.
Remove batteries and a/c cord from Weather Station.
Press any button 20 times. Leave the batteries and a/c cord out of the display for 2 hours.
Insert a/c power cord into a good outlet first, then into the Weather Station.
Weather Station is blank: No letters, numbers or dashed lines
Check that the batteries and a/c cord are installed correctly.
Remove batteries and a/c cord from Weather Station.
Press any button 20 times. Leave the batteries and a/c cord out of the display for 2 hours.
Insert a/c power cord into a good outlet first, then into the Weather Station.
Weather Station drains batteries quickly
Test a new set of alkaline batteries. Write down the date of installation and the voltage of the
batteries.
When the batteries fail, please note the date and voltage again. This is helpful in
determining the problem.
Check for leaking batteries, which may damage the Weather Station.
Battery life is over 12 months when using reputable battery brands.
Try a/c power cord instead of batteries to power Weather Station.
La Crosse Technology, Ltd.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
|