Model: 519-1416
Instruction Manual
La Crosse Technology® introduces a Multifunctional Atomic Clock that is perfect for everyday use. This digital
clock features a stopwatch function, countdown timer, and storable event countdown timer that counts down the
days to a specific event. The clock also sets itself using the WWVB radio signal and features a large, easy-to-
read display.
MULTIFUNCTIONAL ATOMIC CLOCK
STOPWATCH | TIMER | EVENT COUNTDOWN
AM/PM, Time Zone
+ WWVB Time Icon
Hour, Minutes + Seconds
Get Support: www.lacrossetechnology.com/519-1416
GET STARTED
Step 1: Insert 3 new AA Alkaline batteries (not included) into the clock. Observe the correct polarity.
Restart: If the time (12:00) is not displayed after 30 seconds, first, check the battery polarity. Second, remove
batteries from the clock for 15 minutes. Return to Step 1 above.
Battery Cover
Fold out Stand
Battery
Compartment
3 “AA”
Model: 519-1416
Page | 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Button
Press and Release Functions
Hold 3 seconds
START/PAUSE/RESET Stopwatch mode: Start/Stop/Pause
Timer mode: Start/Stop/Pause
Stopwatch mode: Reset
Timer mode: Reset
Event Timer mode: Start/Stop/Pause
Event Timer mode: Reset
MODE
+ (UP)
Toggle between Time Mode, Timer Mode and Event
Mode
Time mode: Set Time/Date
Timer mode: Set Countdown Timers
Event Timer mode: Set Event Timers
1 step forward (setup) any mode
1 step backward (setup)
Fast advance (setup)
Time Mode: hold for WWVB manual search
-
(DOWN)
Fast backward ( setup)
ALARM
Press to display alarm time.
Hold to set alarm time
Alarm mode: Activate/deactivate alarm
Time mode: press to activate the snooze for 10
minutes
Timer mode and Event mode: when the timer
alarm sounds, press to silence the sound.
SNOOZE
MEM
Timer Mode: Press to view preset values: (MEM1: 5 Timer and Event Mode: Hold to store a set
min, MEM 2: 10min, MEM 3: 15 min, MEM 4: 20
min, MEM 5: 30 min)
number
Program Menu (set time, date, 12/24)
In time mode you can set:
WWVB time signal (On/Off)
Time Zone - 7 time zones
DST (Daylight Saving Time On/Off)
12/24 hour time format
Hour
Minutes
Model: 519-1416
Page | 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Seconds
Month
Date
Year
Program menu buttons:
1. Hold the MODE button to enter time set mode.
2. To adjust values press the DOWN or UP buttons (on top).
3. Press the MODE button to confirm adjustments and move to the next item.
4. Press MODE to exit, or wait 30 seconds without pressing buttons to return to the normal time display.
WWVB Reception ON/OFF
The WWVB time reception defaults to ON. To turn the WWVB reception OFF:
1. Hold the MODE button for 5 seconds.
2. WWVB will show after the time and ON will flash above the time.
3. Press and release the DOWN or UP buttons to turn this OFF.
4. Confirm with the MODE button and move to the Time Zone.
Note: When you select WWVB OFF, Time Zone and DST disappear from the time setting order.
Time Zone
This clock offers seven time zones listed in letter format (default is EST):
1. EST will flash.
2. Press and release the DOWN or UP buttons to select a different Time Zone.
3. Confirm with the MODE button and move to Daylight Saving Indicator.
Daylight Saving Time Indicator ON/OFF
DST will default to the ON position as most of the country observes the DST change. If you live in an area does
not observe the DST change, switch this to the OFF position.
1. DST will show after the time and ON will flash above the time.
2. Press and release the DOWN or UP buttons to turn DST to OFF.
3. Confirm with the MODE button and move to 12/24 hour time format.
12-hour or 24-hour Time Format
The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.
1. Hold the MODE button for three seconds to enter time set mode.
2. 12H will flash.
3. Use the UP OR DOWN buttons to choose 12-hour or 24-hour time format.
4. Press the MODE button to confirm and move to set time.
Set Time
To set the time manually:
1. The Hour digit will flash.
2. Use the UP OR DOWN buttons to choose the hour.
3. Press the MODE button to confirm and move to minutes.
4. The Minutes will flash.
5. Use the UP OR DOWN buttons to choose the minutes.
6. Press the MODE button to confirm and move to seconds.
7. The Seconds will flash.
Model: 519-1416
Page | 4
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Use the UP OR DOWN buttons to rest the second to zero.
9. Press the MODE button to confirm and move to set calendar.
Set Calendar
To set the calendar:
1. The Month will flash.
2. Use the UP OR DOWN buttons to choose the month.
3. Press the MODE button to confirm and move to the date.
4. The Date will flash.
5. Use the UP OR DOWN buttons to choose the date.
6. Press the MODE button to confirm and move to the year.
7. The Year will flash.
8. Use the UP OR DOWN buttons to choose the year.
9. Press the MODE button to confirm and exit.
Note: The day of the week will set automatically once the year, month and date are set.
ALARM (“AL” will show in place of seconds)
ALARM buttons:
1. Hold the ALARM button to enter alarm set mode.
2. To adjust values press the DOWN or UP buttons.
3. Press the ALARM button to confirm adjustments and move to the next item.
Set Time Alarm
From time mode, hold the ALARM button for three seconds to enter alarm set mode.
1. The Hour will flash.
2. Use the UP OR DOWN buttons to set the hour.
3. Press the ALARM button to confirm and switch to minutes.
4. The Minutes will flash.
5. Use the UP OR DOWN buttons to set the minutes.
6. Press ALARM button to confirm and exit.
Note: When no buttons are pressed for 30 seconds the clock will save the last change and default back to
normal time mode.
Activate/Deactivate Time Alarm
In normal mode, press and release the ALARM button once to show alarm time.
Press and release the ALARM button repeatedly to turn ON/OFF alarm.
The alarm icon appears when alarm is activated.
Note: The crescendo alarm will ring for 2 minutes then turn off if no buttons are pressed.
Alarm Icon
Snooze
When the alarm sounds, press the SNOOZE button to snooze the alarm for 10 minutes.
The snooze option can be repeated three times.
The snooze icon Zz will flash while the snooze feature is active.
STOPWATCH (Count up, tracks duration of events)
The Timer icon with arrow pointing up will be displayed. Once the timer start the arrow will flash
Start/Stop: Press the MODE button to switch to TIMER MODE. The default time is zero.
1. Press START/PAUSE button to start counting up.
2. After 23 hours and 59 minutes and 59 seconds the day number will start counting.
3. After counting for 23:59:59 and 364 days it will start displaying the years.
Model: 519-1416
Page | 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset:
4. Hold START/PAUSE to reset the time and start from ZERO.
Note: This clock has count up capacity of 9 years, 364 days, 23:59:59.
At 24 hours, a DAY indicator will show
At 365 days a YEAR indicator will show
COUNTDOWN TIMER (cooking, exercising, preset times)
The Timer icon with arrow pointing down will be displayed. Once the timer starts the arrow will flash
The versatile countdown timer can be used for various activities including cooking and exercising. If the timer
isn’t stopped when the time is up, it will begin to count up to track the time since the timer reached zero. Store
up to five times in the countdown memory feature.
Note: The timers will continue to run if you change modes, allowing full clock and ALARM function.
Set Timer:
1. Hold the MODE button and the Seconds will flash.
2. Use the UP OR DOWN buttons to rest the seconds to zero.
3. Press the MODE button to confirm and move to minutes.
4. The Minutes will flash.
5. Use the UP OR DOWN buttons to choose the minutes.
6. Press the MODE button to confirm and move to hour.
7. The Hour digit will flash.
8. Use the UP OR DOWN buttons to choose the hour.
9. Press the MODE button to confirm and exit.
Note: The countdown timer is programmable up to 23 hours, 59 minutes and 59 seconds.
Start/Stop: Press START/STOP to start or stop the timer.
Reset: Hold START/STOP to clear the timer numbers.
Timer Alarm
When the timer reaches zero, the alarm will sound for 20 seconds.
The timer icon will flash.
The clock will start counting up and display the + icon.
Press any button to stop the alarm.
Countdown Timer Memory
Select preset memory value:
1. In timer mode, press the MEM button to select from 5 preset values from 5 minutes to 30 minutes:
(MEM1: 5 min, MEM 2: 10min, MEM 3: 15 min, MEM 4: 20 min, MEM 5: 30 min).
2. Press the START/STOP button to start or stop the preset timer.
Change any preset memory value:
1. Hold the MODE button and the Seconds will flash.
2. Use the UP OR DOWN buttons to reset the seconds to zero.
Model: 519-1416
Page | 6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the MODE button to confirm and move to minutes.
4. The Minutes will flash.
Memory
Number
5. Use the UP OR DOWN buttons to adjust the minutes.
6. Press the MODE button to confirm and move to hour.
7. The Hour digit will flash.
8. Use the UP OR DOWN buttons to adjust the hour.
9. Press the MODE button to confirm and exit.
Start/Stop: Press START/STOP to start or stop the timer.
Reset: Hold START/STOP to clear the timer numbers.
Note: The countdown timer is programmable up to 23 hours 59 minutes and 59 seconds.
EVENT TIMER (holiday/appointment countdown, up to 5 events)
The Event icon and Timer icon with arrow pointing down will be displayed. Once the timer starts the
arrow will flash.
Easily track the number of days to specific date using the event countdown timer. This timer is perfect for
counting down the days to holidays or appointments. The event countdown timer allows you to program up to
five events simultaneously.
Note: The event timer is programmable up to 9 years, 364 days, 23 hours 59 minutes and 59 seconds.
Set event timer:
1. The Month digit will flash.
Event
Time
2. Use the UP OR DOWN buttons to choose the month.
3. Press the MODE button to confirm and move to date.
4. The Date digit will flash.
5. Use the UP OR DOWN buttons to choose the date.
6. Press the MODE button to confirm and move to year.
7. The two digit Year will flash.
8. Use the UP OR DOWN buttons to choose the year.
9. Press the MODE button to confirm and move to hour.
10. The Hour digit will flash.
11. Use the UP OR DOWN buttons to choose the hour.
12. Press the MODE button to confirm and move to minutes.
13. The Minutes will flash.
14. Use the UP OR DOWN buttons to choose the minutes.
15. Press the MODE button to confirm and move to seconds.
16. The Seconds will flash.
Note: The date information will be saved
and displaying next to the EVENT icon.
17. Use the UP OR DOWN buttons to rest the second to zero.
18. Press the MODE button to confirm and exit.
Start/Stop: Press the START/STOP button to start or stop the event timer.
Reset: Hold the START/STOP button to clear the event timer.
Event Alarm
When the event timer reaches zero, the alarm will sound for 20 seconds.
The event icon will flash.
The clock will start counting up and display the + icon.
Press any button to stop the alarm.
Event Timer Memory
The event timer does not have preset values. When you set events, they will store into memory for easy recall
with the MEM button.
Model: 519-1416
Page | 7
Download from Www.Somanuals.com. All Manuals Search And Download.
The first event will store in MEM 1. The next events will store MEM 2, MEM 3, MEM 4, and MEM 5. Then the
next time an event is saved it will replace MEM 1 and start the sequence again.
MEM and a number (MEM 1) will display above the event timer, when you use a preset event timer memory.
Note: Multiple timers (event, stopwatch or countdown) can run at the same time. The timers will continue to run
in the background, when the clock is displayed.
MANUAL WWVB RADIO-CONTROLLED TIME SEARCH
From time mode press the UP button to start or stop a manual signal search.
WWVB Icon will flash
WWVB
Icon
For information about WWVB, visit:
LOW BATTERY ICON
Low battery icon indicates low battery for the clock.
If the icon is displayed replace batteries.
Low Battery
Icon
SPECIFICATIONS
Operating Temperature:
32°F to 122°F (0°C to 50°C)
Power:
3-AA, IEC, LR6 batteries (not included)
Battery life is over 24 months when using reputable battery
brands.
Battery Life:
Dimensions:
11.81”L x 6.49”H (29.97cm x 16.51cm)
CARE AND MAINTENANCE
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents.
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for public information. It is intended for home use only.
The specs of this product may change without prior notice.
Improper use or unauthorized opening of housing voids warranty.
WARRANTY AND SUPPORT INFORMATION
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
View full warranty details online at:
For warranty work, technical support or other information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Contact Support: 1-608-782-1610
Model: 519-1416
Page | 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Online Product Support:
Protected under U.S. Patents: 5,978,738, 6,076,044, 6,597,990
Scan for online information
FCC STATEMENT
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) the device must accept any interference received,
including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or
processed using electronic, mechanical or chemical procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked
and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their
consequences.
Model: 519-1416
Page | 9
Download from Www.Somanuals.com. All Manuals Search And Download.
|