LG Electronics Refrigerator LSC 26905TT User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Entry  
The model and serial numbers are found on the inner case or back of refrigerator  
compartment of this unit. These numbers are unique to this unit and not  
available to others. You should record requested information here and retain  
this guide as a permanent record of your purchase. Staple your receipt here.  
Date of purchase  
Dealer  
:
:
:
:
:
:
Dealer address  
Dealer phone no.  
Model no.  
Serial no.  
Important safety instruction  
Before use, this refrigerator must be properly installed and located in accordance with  
the installation instructions in this manual.  
Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly  
and pull it straight out from the outlet.  
When moving your appliance away from the wall, be careful not to roll over the power  
cord or to damage it in any way. Do not crush or damage the water line.  
After your refrigerator is in operation, do not touch the cold surfaces in the freezer  
compartment, particularly when your hands are damp or wet. Skin could adhere to  
these extremely cold surfaces.  
Unplug the power cord from the power outlet for cleaning or other requirements. Never  
touch it with wet hands because you can get an electric shock or be injured.  
Never damage, bend, kink, pull out, or twist the power cord because damage to the  
power cord can cause product failure, fire, or electric shock. If you have doubts the  
appliance is properly grounded, consult a qualified electrician.  
Never place glass products in the freezer because they may be broken from expansion  
when their contents are frozen.  
Never put your hands within the ice storage bin of the automatic icemaker. You can be  
injured by the operation of the automatic icemaker.  
The appliance is not intended for use by young children without supervision.  
Young children should be supervised to ensure that they do not play with the appliance.  
Never allow anyone to climb, sit, stand, or hang on the door. These actions may  
damage the refrigerator and even tip it over, causing severe personal injury.  
Before you move your refrigerator into its final location,  
it is important to make sure you have the proper electrical  
connection:  
Recommended  
Grounding  
Method  
A 115 Volt, 60 Hz., AC only 15, or 20 ampere fused, grounded  
electrical supply is required. It is recommended that a separate  
circuit serving only your refrigerator be provided. Use an outlet that  
cannot be turned off by a switch. Do not use an extension cord.  
The refrigerator-freezer should be so positioned that the supply plug  
is accessible for quick disconnection in the event of an emergency.  
Accessibility of  
Supply Plug  
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or  
a similarly qualified person in order to avoid any hazard.  
Supply Cord  
Replacement  
Do not modify or extend the Power Cord length.  
Warning  
It will cause electric shock or fire.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Child Entrapment  
Warning  
DANGER: Risk of child entrapment.  
Before you throw away your old refrigerator or freezer:  
Take off the doors but leave the shelves in place so that children may not easily climb  
inside.  
The appliance is not intended for use by young children without supervision.  
Young children should be supervised to ensure that they do not play with the appliance.  
Dont store or use gasoline or other flammable vapor and liquids in the vicinity of this or  
any other appliance.  
Don’t Store  
In the event of an electric short circuit, grounding (earthing) reduces the risk of electric  
shock by providing an escape wire for the electric current.  
Grounding (Earthing)  
In order to prevent possible electric shock, this appliance must be grounded.  
improper use of the grounding plug can result in an electric shock. Consult a qualified  
electrician or service person if the grounding instructions are not completely  
understood, or if you have doubts on whether the appliance is properly grounded.  
Identification of Parts  
Freezer  
Compartment  
Refrigerator  
Compartment  
Dairy Corner  
Lamp  
Door Rack  
Water Filter  
Shelf  
Automatic  
Icemaker  
Lamp  
Shelf  
Snack Drawer  
Shelf (steel)  
Door Rack  
Vegetable Drawer  
Door Rack  
Vegetable Drawer  
Drawer  
Door Rack  
Lower Cover  
NOTE  
If you find some parts missing from your unit, they may be parts only used in other  
models.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Where to Locate  
1. Place your appliance where it is easy to use.  
Select a Good  
Location  
2. Avoid placing the unit near heat sources, direct sunlight, or moisture.  
3. To avoid vibrations, the appliance must be leveled.  
4. Do not install this refrigerator in areas where the ambient temperature is below 41F.  
It will have an adverse effect on performance.  
Method to remove protection film(Some Model)  
1. Grasp the handles with both hands and push them upward to remove.  
2. Entirely remove the protection film adhered to the external surface of the door.  
3. Assemble the fixing bracket on both ends of the handle to the fixing bolt of the door  
and lower the handle downward until it is entirely fixed.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Door removal  
Warning  
Electric Shock Hazard  
Disconnect electrical supply to refrigerator before installing.  
Failure to do so could result in death or serious injury.  
If your entrance door is too narrow for the  
refrigerator to pass through, remove the  
refrigerator door and pass the refrigerator laterally.  
Lower Cover  
Remove Lower  
Cover and  
Water Feed Tube  
Remove the lower cover by lifting upward, and  
then pull up the water feed tube while pressing  
Water Feed Tube  
area  
shown in the figure to the right.  
NOTE  
If a tube end is deformed or abraded, trim the part away.  
Disconnecting the tube under the door causes about 1.5 litters water to flow out. Please  
put a large container at end of tube to prevent water from draining on to the floor.  
Hinge  
Cover  
Connection  
Wires  
Remove the  
Freezer  
Compartment  
Door  
1) Remove the hinge cover by loosening the  
screws. Disconnect all connections except  
the ground line.  
Earth Line  
Upper Hinge  
Upper Hinge  
Keeper  
2) Remove the keeper by rotating it counter  
clockwise and then lifting the upper  
hinge up .  
NOTE  
When removing the upper hinge, be careful that the door does not fall forward .  
3) Remove the freezer compartment door by  
lifting it upward. This time, the door should  
be lifted enough for the water feed tube to  
be completely pulled out.  
Lower hinge  
NOTE  
After removing the door, take it into the kitchen where you are installing the  
refrigerator. Lay it down on a blanket and be careful to avoid damaging the water  
feed tube.  
Remove the  
Refrigerator  
Door  
1) Loosen the hinge cover screws and remove  
the cover. Remove connection wire.  
Connection  
Wires  
2) Remove keeper by rotating it clockwise  
and then remove the upper hinge by lifting  
it up  
Upper Hinge  
Keeper  
.
3) Remove the refrigerator compartment door  
by lifting it up.  
6
Lower Hinge  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Push the refrigerator sideways through the  
entrance door as shown in the right picture.  
Move the  
Refrigerator  
Door replacement  
Mount the doors in the reverse order of removal after the refrigerator has been  
moved to the installation area.  
Feed water tube installation  
2
Before  
Installation  
Automatic icemaker operation needs water pressure of 21.3~121psi(lb/inch ) (That  
is, a 7oz. paper cup will be filled within 3 sec.).  
2
If water pressure does not reach the rated 21.3psi(lb/inch ), it is necessary to  
purchase a separate pressure pump for normal automatic icemaking and cool water  
feed.  
Keep the total length of the water feed tube within 40 feet and be careful not to  
bend or kink the tube. If the tube is longer than 40 feet, the icemaker and water  
dispenser will not operate properly.  
Install the water feed tube at a place free from heat.  
Connect to potable water supply only.  
Refer to instructions with water filter kit for installation.  
Warning  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Water Connection Instruction Guide  
Connecting  
the Refrigerator  
to a Water Source  
Read all directions carefully before you begin.  
Warning  
Connect to potable w ater supply only.  
IMPORTANT  
If operating the refrigerator before installing the water connection, turn icemaker  
to the OFF position to prevent operation without water.  
All installations must be in accordance with local plumbing code requirements.  
Use copper tubing and check for leaks.  
Install copper tubing only in areas where temperatures will remain above freezing.  
It may take up to 24 hours for your icemaker to begin producing ice.  
Tools Required  
Standard screwdriver  
7/16-inch and 1/2-inch open-end wrenches or two adjustable wrenches  
1/4-inch nut driver  
1/4-inch drill bit  
Hand drill or electric drill (properly grounded)  
NOTE  
Your refrigerator dealer has a kit available with a 1/4-inch saddle-type shut-off valve,  
a union, and copper tubing. Before purchasing, make sure a saddle-type valve  
complies with your local plumbing codes. Do not use a piercing-type or 3/16-inch  
saddle valve which reduces water flow and clogs more easily.  
Cold Water Supply  
The icemaker water valve contains a flow washer which is used as a water  
pressure regulator.  
The icemaker needs to be connected to a cold water line with water pressure  
30~120psi(lb/inch2)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Connect  
the Tubing to  
Water Line  
1. Unplug refrigerator or disconnect power.  
2. Turn OFF main water supply. Turn on the nearest faucet to relieve the pressure  
on the line. It may help to open an outside faucet to allow the water to drain from  
the line in the house.  
3. Find a 1/2-inch to 1-1/4-inch vertical COLD water pipe near the refrigerator.  
NOTE  
Horizontal pipe will work, but the following precaution must be taken: Drill on the top of  
the pipe, not the bottom. This will help keep water away from the drill. This also keeps  
normal sediment from collecting in the valve.  
4. To determine the length of copper tubing you will need, measure from the  
connection on the lower left rear of the refrigerator to the water pipe. Add 7  
feet (2.1m) to allow for moving refrigerator for cleaning. Use 1/4-inch O.D.  
(outside diameter) copper tubing. Be sure both ends of copper tubing are cut  
square.  
5. Using a drill, drill a 1/4-inch hole in the cold water pipe you have selected.  
6. Fasten shut-off valve to cold water pipe with pipe clamp. Be sure outlet end is  
solidly in the 1/4-inch drilled hole in the water pipe and that the washer is  
under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws  
carefully and evenly so washer makes a watertight seal. Do not overtighten or  
you may crush the copper tubing, especially if soft (coiled) copper tubing is  
used. Now you are ready to connect the copper tubing.  
7. Slip compression sleeve and compression nut on copper tubing as shown.  
Insert end of tubing into outlet end squarely as far as it will go. Screw  
compression nut onto outlet end with adjustable wrench. Do not over tighten.  
8. Place the free end of the tubing into a container or sink, and turn ON main  
water supply and flush out tubing until water is clear. Turn OFF shutoff valve  
on the water pipe. Coil the copper tubing as shown below.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Operation Instruction Guide  
Connect the Tubing  
to the Refrigerator  
Before m aking the connection to the refrigerator, be sure the refrigerator  
pow er cord is not plugged into the w all outlet.  
If your refrigerator does not  
have a water filter, we  
"
recommend installing one. If  
your water supply has sand or  
particles that could clog the  
"
screen of the refrigerators  
water valve. Install the filter in  
the water line near the  
refrigerator.  
1. Remove the plastic flexible  
cap from the water valve.  
2. Place the compression nut and  
ferrule (sleeve) onto the end of  
the tubing as shown.  
3. Insert the end of the copper tubing into the connection as far as possible. While  
holding the tubing, tighten the fitting.  
Turn the Water On at  
the Shutoff Valve  
Tighten any connections that leak.  
Plug In the Refrigerator  
Arrange the coil of copper tubing behind the refrigerator so it does not vibrate  
against the back of the refrigerator or against the wall. Push the refrigerator  
back to the wall.  
Start the lcem aker  
Set the icemaking stop switch to the ON position. The icemaker will not begin  
to operate until it reaches its operating temperature of 15 °F (-9 °C). It will then  
begin operation automatically.  
Automatic Ice maker  
The automatic icemaker makes 8 cubes at a time, 120/150 pieces per day.  
But these quantities may vary according to circumstance, including ambient  
temperature, door openings, freezer load.etc.  
The Icemaker stops when the bin is full.  
NOTE  
It is normal to hear a noise when ice drops into the bin.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
When Icemaker  
Does Not Operate  
Smoothly  
Ice is clum ped together  
When ice is clumped together, take the ice clumps out of the ice storage bin,  
break them into small pieces, and then place them into the ice storage bin  
again.  
When the icemaker produces too small or clumped ice, the amount of water  
supplied to the ice maker must be adjusted. Contact the service center.  
If ice is not used frequently, it may clump together.  
Pow er failure  
Water may drop into the freezer compartment. Take the ice storage bin out and  
discard all the ice. Dry the bin and replace it.  
The unit is new ly installed  
It takes about 12 hours for a newly installed refrigerator to make ice.  
Throw away the ice.  
CAUTION  
The first ice and water may include particles or odor from the feed water pipe or  
feed water box.  
This is also necessary if the refrigerator has not been used for a long time.  
Never store beverage cans or other foods in ice storage bin for the purpose of rapid  
cooling.  
Such actions may damage the automatic ice maker.  
Never remove the icemaker cover.  
Shake the bin occasionally to cause the ice to settle.  
Ice may pile up just around the icemaker causing the icemaker to think that the ice  
storage bin is full.  
If discolored ice is dispensed, contact an Authorized Service Center immediately.  
Do not use the ice or water until the problem is corrected.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Height Adjustment  
When the tape is attached into the left leg, remove it(tape). Level the door by inserting flat  
If the freezer  
compartment door  
is lower than the  
refrigerator  
(
-
type) driver into the groove of the left height adjusting screw and rotating it clockwise .  
compartment door  
If the freezer  
compartment door  
is higher than the  
refrigerator  
When the tape is attached into the right leg, remove it carefully. Level the door by  
inserting flat ( type) driver into the groove of the right height adjusting screw and  
rotating it clockwise .  
-
compartment door  
After leveling the  
door height  
The refrigerator doors will close smoothly by adjusting the height adjusting screw. If  
the doors do not close correctly, performance may be affected.  
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.  
Next  
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their  
proper places. They are packed together to prevent possible damage during shipping.  
3. Connect the power supply cord (or plug) to the outlet. Use this appliance on a  
dedicated circuit.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Starting  
When your refrigerator is first installed, allow it to stabilize at normal operating  
temperatures for 2-3 hours prior to filling it with fresh or frozen foods.  
If operation is interrupted, wait 5 minutes before restarting.  
Adjusting The Temperatures and Functions  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
1. Buzzer sound mute Mode  
The buzzer sound is set to OFF.  
It activates by sounding the recognition sound of “Ding~” after pressing and  
holding “Express FRZbutton more than 5 seconds.  
It inactivates when resetting the mode power.  
2. Display Power saving Mode  
It places display in standby mode until door is opened.  
Press “Freezer” and “Express FRZbuttons simultaneously to turn all leds ON and  
then OFF with the recognition sound of “Ding~” after 5 seconds.  
Once the mode activates, the display is OFF. Until door is opened or display button  
is pressed. When 30 seconds has elapsed after closing door or pressing button,  
the display turns OFF.  
To deactivate this mode is same as the activation methods. The mode inactivates  
when resetting the power.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
You can adjust temperature of freezer compartment and refrigerator  
Compartment.  
Freezer Compartment temperature adjustment  
How to adjust the  
temperature in  
the freezer  
FREEZER  
BAR  
compartment  
Indication  
Refrigerator Compartment temperature adjustment  
How to adjust the  
temperature in  
the refrigerator  
compartment  
REFRIGERATOR  
BAR  
Indication  
Whenever pressing button, setting is repeated in the order of (Middle)  
(Middle Strong) (Strong) (Weak) (Middle Weak).  
The actual inner temperature varies depending on the food status, as the  
indicated setting temperature is the target temperature, not actual temperature  
within refrigerator.  
Please adjust temperature as above after using refrigerator for minimum 2~3  
days.  
Dispenser  
selection  
You can select water or ice.  
Please select water, Crushed ice, or cubed ice by  
pressing  
button as you desire.  
Please press the button gently by pushing in cup.  
You will hear a clap when the ice door closes  
after ice is dispensed.  
Pressing  
Switch  
Reference : Hold your cup in place for a couple of seconds after  
dispensing ice or water so the last few drips go in  
your cup instead of on the floor.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The automatic icemaker can automatically make 8 cubes at a time,  
120~150 pieces per day. This quantity may vary by circumstance, including ambient  
temperature, door opening, freezer load. etc.  
Automatic  
Icemaker  
Icemaking stops when the ice storage bin is full.  
If you don't want to use automatic icemaker, turn the icemaker switch to  
OFF.  
If you want to use automatic ice-maker again, change the switch to ON.  
NOTE  
It is normal that a noise is produced when ice drops into the ice storage bin.  
Ice is lum ped together  
When ice maker  
does not operate  
smoothly  
If the ice lumps together, take it out, break it apart, and put it back into the storage  
bin.  
When the ice maker produces too small or lumped together ice, the amount of  
water supplied to the ice maker needs to adjusted. Contact the service center.  
If ice is not used frequently, it may lump together.  
Pow er failure  
Ice may drop into the freezer compartment. Take the ice storage bin out and discard  
all the ice then dry it and place it back. After the machine is powered again, crushed  
ice will be automatically selected.  
The unit is new ly installed  
It takes about 12 hours for a newly installed refrigerator to make ice.  
Please select this function for prom pt freezer.  
Express Freezer  
”OFFONOFF” is repeated  
whenever pressing  
button.  
The arrow mark graphic remains at the  
On status after flickering 4 times when  
selecting Special Refrigeration On  
Prompt freezer function automatically  
turns off after a fixed time passes.  
This button stops operation of different  
button and dispenser function.  
Lock  
Locking or Release is repeated  
whenever the  
seconds.  
is pressed more than 3  
If you use the LOCK button, none of the other  
buttons will work until you unlock them.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Door open w arning  
The Other  
Functions  
A warning tone will sound 3 times at thirty-second intervals if the refrigerator or freezer  
door is left open for more than sixty seconds.  
Please contact the local service center if warning tone continues to sound even after  
closing the door.  
Diagnosis (failure detection) function  
Diagnosis function automatically detects failure when failure is found in product during  
the use of refrigerator.  
If your refrigerator fails, do not turn off the power. Instead, contact a local Authorized  
service center or call our support line for assistance. Turning off the appliance will  
make it more difficult for the service technician to determine the problem.  
Water is cooled while stored in the water tank in freezer door, and then sent to the  
dispenser.  
Ice is made in the automatic icemaker and sent to the dispenser divided into crushed  
or cubed ice.  
How Ice/Cold  
Water is Supplied  
How to Use  
Dispenser  
Select among crushed ice, water, and cubed ice and press the push switch with a  
glass or other container.  
Water  
Crushed Ice  
Cubed Ice  
Light the water lamp  
by pressing the  
selection button.  
Water will be dispensed  
by pressing the push  
switch with a glass.  
Light the crushed ice  
lamp by pressing the  
selection button.  
Light the cubed ice  
lamp by pressing  
the selection  
C
rushed ice will be  
button.  
dispensed by pressing the  
push switch with a glass.  
Cubed ice will be dispensed  
by pressing the push  
switch with a glass.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
LED  
6 Filter Condition  
(filter replacement  
cycle) Display  
Function  
There is a replacement indicator light for the  
water filter cartridge on the dispenser.  
Water filter needs replacement once every six  
months.  
Filter light comes on to let you know when to  
replace filter.  
After replacing the filter, press and hold the lock button more than 3seconds.  
FILTER RESET, HOLD 3 SECS text turn off filter light.  
Throw away the ice (about 20 pieces) and water (about 7 glasses) first made after  
refrigerator installation.  
Cautions  
This is also necessary when the refrigerator has not been used for a long time.  
Keep children away from the dispenser.  
Children may play with or damage the controls.  
Be careful that food does not block the ice passage.  
If foods are placed at the entrance of ice passage, the  
dispenser may malfunction. The passage may also become  
blocked with frost if only crushed ice is used. Remove the  
frost that accumulates.  
Storing cans or other items in the ice bin may damage  
the icemaker or the container may burst.  
Never use thin crystal glass or crockery to collect ice.  
Such glasses or containers may break.  
Put ice first into a glass before filling water or other beverages.  
Water may be splashed if ice is added to existing liquid in a glass.  
Keep your hands and tools out of the ice door and passage.  
You might break something or injure yourself.  
Never remove the ice maker cover.  
Shake the ice bin occasionally to level the ice in it.  
Sometimes the ice piles up near the icemaker, causing the icemaker to misread the bin  
level and stop producing ice.  
If discolored ice or water is dispensed, contact an Authorized service center  
immediately and discontinue use until the problem is corrected.  
Never use too narrow or shallow glass.  
Ice may be jammed in ice passage and, thus, the ice maker may fail.  
Keep the glass at a proper distance from ice outlet.  
A glass too close to the outlet may hinder ice from coming out.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Shelf  
The refrigerator compartment shelf is adjustable so that you can place it at a height  
according to space requirement of foods.  
Shelf Height  
Adjustment  
2
Slide Shelf  
Pull the shelf ahead and take it out while  
3
lifting both front and rear part.  
1
1
Fix Shelf  
Lightly lift up the front part of shelf to pull it  
ahead and then take it out while lifting the  
3
rear part of shelf.  
2
NOTE  
Make sure the shelf is horizontal. If not, it may drop.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Suggestion on Food Storage  
Location of Foods  
(Refer to Identification of Parts)  
Drawer  
Freezer  
Compartment  
Shelf  
Snack  
Store small foods such as bread, snacks, etc.  
Store various frozen foods such as meat, fish,  
ice cream, frozen snacks, etc.  
Freezer  
Compartment  
Door Rack  
Store small packed frozen food.  
Temperature is likely to increase as door  
opens. So, do not store long-term food such  
as ice cream, etc.  
Freezer  
Compartment  
Drawer  
Store meat, fish, chicken, etc. after  
wrapping them with foil.  
Store dry  
.
Store milk products such as butter, cheese,  
etc.  
Milk Product  
Corner  
Refreshment  
Center  
Store foods of frequent use such as beverage,  
etc.  
Refrigerator  
Compartment  
Shelf  
Store side dishes or other foods.  
Refrigerator  
Compartment  
Door Rack  
Store small packed food or beverages such  
as milk, juice, beer, etc.  
Vegetable Drawer  
Store vegetables or fruits.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Suggestion on Food Storage  
Storing Foods  
Store fresh food in the refrigerator compartment. How food is frozen and thawed is an  
important factor in maintaining its freshness and flavor.  
Do not store food, which spoils easily, at low temperatures, such as bananas and  
melons.  
Allow hot food to cool prior to storing, placing hot food in the refrigerator could spoil  
other food, and lead to higher energy consumption.  
When storing the food, cover it with vinyl wrap or store in a container with a lid. This  
prevents moisture from evaporating, and helps food to keep its taste and nutrients.  
Do not block air vents with food. Smooth circulation of chilled air keeps refrigerator  
temperatures even.  
Do not open the door frequently. Opening the door lets warm air enter the refrigerator,  
and cause temperatures to rise.  
Never keep too much food in door rack because they may push against inner racks so  
that the door cannot be fully closed.  
Do not store bottles in the freezer compartment - they may break when frozen.  
Freezer  
Compartment  
Do not refreeze food that has been thawed. This causes loss of taste and nutrient.  
When storing frozen food like ice cream for a long period, place it on the freezer  
shelf, not in the door rack.  
Do not touch the cold foods or containers, especially made of metallic, with wet  
hands.  
Refrigerator  
Compartment  
Avoid placing moist food in top refrigerator shelves, it could freeze from direct  
contact with chilled air.  
Always clean food prior to refrigeration. Vegetables and fruits should be washed and  
wiped, and packed food should be wiped, to prevent adjacent food from spoiling.  
When storing eggs in their storage rack or box, ensure that they are fresh, and always  
store them in an upright position, which keeps them fresh longer.  
NOTE  
If you keep the refrigerator in a hot and humid place, frequent opening of the door or  
storing a lot of vegetables in it may cause condensation to form. Remove the  
condensation with dust free cloth.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
How to Dismantle Parts  
NOTE  
Dismantling is done in the reverse sequence of assembly.  
Be sure to unplug the power plug before dismantling and assembly.  
Never apply severe force to dismantle parts. Parts may be damaged.  
Freezer  
Compartment  
Lamp  
Remone cover by pressing upward on bottom  
and rotating outward .  
Turn the bulb counterclockwise. Max. 40 W bulb  
for refrigerator is used and can be purchased at  
a service center.  
Seperate the lamp by pulling it out, and then  
remove the lamp. Max. 15 W bulb for  
refrigerator is used and can be purchased at a  
service center.  
Dispenser Lamp  
To remove a shelf, Lift the left part of the  
shelf a bit. Lift it to the direction , push the  
right part to the direction, and take it out.  
Freezer  
Compartment  
Shelf  
Door Rack and  
Support  
Lift the door rack holding both sides and  
pull it out to direction.  
Lift the ice shelf as shown in the right figure  
Ice Storage Bin  
2
and pull it out .  
Hold the ice storage bin as shown in the right  
figure and pull it out while slightly lifting it .  
1
It is recommended not to dismantle the ice  
storage bin unless it is necessary.  
Use both hands to remove the ice bin to avoid  
dropping it.  
If the ice bin does not slide into place easily,  
twist the drive device slightly.  
After Dispenser  
Is Used  
The water collector has no self-draining  
function. It should be cleaned regularly.  
Remove the cover by pulling the front side of  
water collector cover and dry it with a cloth.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
To remove the lamp cover, press the protrusion under the lamp cover to the front and  
then pull the lamp cover out.  
Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and can be  
purchased at a service center.  
Lamp in  
Refrigerator  
Compartment  
NOTE  
Be sure to remove parts from the refrigerator door when removing the vegetable  
compartment, snack drawer, and refreshment center cover.  
Vegetable  
Compartment  
Cover  
To remove the vegetable compartment  
cover, pull out the vegetable compartment  
a bit to the front , lift the front part of the  
vegetable compartment cover as shown by  
, and take it out.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
General Information  
During average length vacations, you will probably find it best to leave the refrigerator  
in operation. Place freezable items in freezer for longer life.  
Vacation Time  
When you plan to store the refrigerator, remove all food, disconnect the power cord,  
clean the interior thoroughly, and Block the doors open to prevent mold and mildew.  
Be certain the stored refrigerator does not present a child entrapment danger.  
Most power failures that are corrected in an hour or two will not affect your  
refrigerator temperatures.  
However, you should minimize the number of door openings while the power is off.  
Power Failure  
If You Move  
Remove or securely fasten down all loose items inside the refrigerator.  
To avoid damaging the height adjusting screws, turn them all the way into the base.  
The outside wall of the refrigerator cabinet may sometimes get warm, especially just  
after installation.  
Dont be alarmed. This is due to the anti-condensation pipe, which pumps hot  
refrigerant to prevent sweating on the outer cabinet wall.  
Anti-  
Condensation  
Pipe  
Cleaning  
It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled  
food should be wiped up immediately, since it may acidify and stain plastic surfaces if  
allowed to settle.  
Use a lukewarm solution of mild soap or detergent to clean the durable finish of your  
refrigerator. Wipe with a clean damp cloth and then dry.  
Exterior  
Interior  
Regular cleaning is recommended. Wash all compartments with a baking soda  
solution or a mild detergent and warm water. Rinse and dry.  
After Cleaning  
Warning  
Please verify that the power cord is not damaged, power plug is not overheated, or  
power plug is well inserted into the power socket.  
Always remove power cord from the wall outlet prior to cleaning in the vicinity of  
electrical parts (lamps, switches, controls, etc.).  
Wipe up excess moisture with a sponge or cloth to prevent water or liquid from  
getting into any electrical part and causing an electric shock.  
Never use metallic scouring pads, brushes, coarse abrasive cleaners, strong alkaline  
solutions, flammable or toxic cleaning liquids on any surface.  
Do not touch frozen surfaces with wet or damp hands, because damp object will stick  
or adhere to extremely cold surfaces.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Troubleshooting  
Before calling for service, review this list. It may save you both time and expense.  
This list includes common occurrences that are not the result of defective  
workmanship or materials in this appliance.  
Occurrence  
Possible cause  
Solution  
Runing of refrigerator  
Refrigerator control is off.  
Set refrigerator control. See setting the  
controls.  
Refrigerator  
compressor  
does not run.  
Refrigerator is in defrost cycle.  
This is normal for a fully automatic  
defrosting refrigerator. The defrost  
cycle occurs periodically.  
Plug at wall outlet is disconnected.  
Power outage. Check house lights.  
Make sure plug is tightly pushed into  
outlet.  
Call local electric company.  
Refrigerator is larger than the previous  
one you owned.  
This is normal. Larger, more efficient  
units run longer in these conditions.  
Refrigerator  
runs too often  
or too long  
It is normal for the refrigerator to work  
longer under these conditions.  
Room or outside weather is hot.  
It takes some hours for the refrigerator  
to cool down completely.  
Refrigerator has recently been  
disconnected for a period of time.  
Large amounts of warm or hot food  
may have been stored recently.  
Warm food will cause the refrigerator to  
run longer until the desired temperature  
is reached.  
Doors are opened too frequently or too  
long.  
Warm air entering the refrigerator  
causes it to run longer. Open the door  
less often.  
Refrigerator or freezer door may be  
slightly open.  
Make sure the refrigerator is level.  
Keep food and containers from  
blocking door. See problem section.  
OPENING/CLOSING of doors.  
Set the refrigerator control to a  
warmer setting until the refrigerator  
temperature is satisfactory.  
Refrigerator control is set too cold.  
Clean or change gasket. Leaks in the  
door seal will cause refrigerator to run  
longer in order to maintain desired  
temperatures.  
Refrigerator or freezer gasket is dirty,  
worn, cracked, or poorly fitted.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Occurrence  
Possible cause  
Solution  
Temperatures are too cold  
Temperature in the  
Set the freezer control to a warmer  
setting until the freezer temperature is  
satisfactory.  
Freezer control is set too cold  
freezer is too cold  
but the refrigerator  
temperature is  
satisfactory.  
Temperature in the  
refrigerator is too  
cold and the freezer  
temperature  
Refrigerator control is set too cold.  
Refrigerator control is set too cold.  
Set the refrigerator control to a  
warmer setting  
is satisfactory.  
Food stored in  
drawers freezes.  
See above solution.  
Temperatures are too warm  
Freezer control is set too warm.  
Temperatures in  
the refrigerator  
or freezer are  
too warm.  
Set the freezer or refrigerator control to  
a colder setting until the freezer or  
refrigerator temperature is satisfactory.  
Refrigerator control is set too warm.  
Refrigerator control has some effect on  
freezer temperature.  
Set the freezer or refrigerator control to a  
colder setting until the freezer or  
refrigerator temperature is satisfactory.  
Doors are opened too frequently or too  
long.  
Warm air enters the refrigerator/ freezer  
whenever the door is opened.  
Open the door less often.  
Door is slightly open.  
Close the door completely.  
Large amounts of warm or hot food  
may have been stored recently.  
Wait until the refrigerator or freezer  
has a chance to reach its selected  
temperature.  
A refrigerator requires some hours to  
cool down completely.  
Refrigerator has recently been  
disconnected for a period of time.  
Temperature in the  
refrigerator  
Refrigerator control is set too warm.  
Set the refrigerator control to a colder  
setting.  
is too warm but  
the freezer  
temperature is  
satisfactory.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Occurrence  
Possible cause  
Solution  
Sound and noise  
Louder sound  
levels when  
refrigerator is on.  
Todays refrigerators have increased  
storage capacity and maintain more  
even temperatures.  
It is normal for sound levels to be higher.  
Louder sound  
levels when  
compressor  
comes on.  
Refrigerator operates at higher pressures  
during the start of the ON cycle.  
This is normal. The sound will level off as  
the refrigerator continues to run.  
Vibrating or  
rattling noise.  
Floor is uneven or weak.  
Refrigerator rocks on the floor when it is  
moved slightly.  
Be sure floor is level and solid and can  
adequately support refrigerator.  
Remove items.  
Items placed on the top of the refrigerator  
are vibrating.  
Dishes are vibrating on the shelves in  
the refrigerator.  
Move dishes slightly.  
Make sure refrigerator is level and firmly  
set on floor.  
Move refrigerator so that it does not  
touch the wall or refrigerator.  
Refrigerator is touching wall or cabinets.  
Water/Moisture/Ice inside refrigerator  
Moisture collects  
on the inside walls  
of the refrigerator.  
The weather is hot and humid which  
increases the rate of frost buildup  
and internal sweating.  
This is normal.  
Door is slightly open.  
See problem section opening/closing of  
doors.  
Open the door less often.  
Door is opened too often or too long.  
Water/Moisture/Ice outside refrigerator  
Moisture forms  
Weather is humid.  
This is normal in humid weather.  
When humidity is lower, the moisture  
should disappear.  
on the outside of  
the refrigerator  
or between doors.  
This time, close the door completely.  
Door is slightly open,causing cold air  
from the inside the refrigerator to meet  
warm air from the outside.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Occurrence  
Possible cause  
Solution  
Odors in refrigerator  
Clean interior with sponge,warm water  
and baking soda.  
Interior needs to be cleaned.  
Cover food completely.  
Food with strong odor is in the refrigerator.  
Some containers and wrapping materials  
produce odors.  
Use a different container or brand of  
wrapping materials  
.
Opening/Closing of doors/Drawers  
Door(s) will not  
close.  
Move packages that keep door from  
closing.  
Food package is keeping door open.  
Door(s) will not  
close.  
Door was closed too hard, causing other  
door to open slightly.  
Close both doors gently.  
Refrigerator is not level. It rocks on the  
floor when it is moved slightly.  
Adjust the height adjusting screw.  
Floor is uneven or weak.  
Refrigerator rocks on the floor when it  
is moved slightly.  
Be sure floor is level and can adequately  
support refrigerator.  
Contact carpenter to correct sagging or  
sloping floor.  
Move refrigerator.  
.
Refrigerator is touching wall or cabinets.  
Drawers are  
difficult to move.  
Keep less food in drawer.  
Food is touching shelf on top of the  
drawer  
Track that drawer slides on is dirty.  
Clean drawer and track.  
Dispenser  
Dispenser will not  
dispense ice  
When the first supply of ice is dropped  
into the bin, the dispenser should operate.  
Ice storage bin is empty.  
Turn the freezer control to a higher  
setting so that ice cubes will be made.  
When the first supply of ice is made,  
the dispenser should operate.  
Freezer temperature is set too warm.  
Open household water line valve and  
allow sufficient time for ice to be made.  
When ice is made, dispenser should  
operate.  
Household water line valve is not open.  
Refrigerator or freezer door is not closed.  
Be sure both doors are closed.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Occurrence  
Possible cause  
Solution  
Ice has melted and frozen around auger  
due to infrequent use, temperature  
fluctuations and/or power outages.  
Remove ice storage bin, and thaw and  
the contents. Clean bin, wipe dry and  
replace in proper position.  
When new ice is made, dispenser should  
operate.  
Dispenser will  
dispense  
not  
ice.  
Ice dispenser  
is jammed.  
Remove the ice cubes that are jamming  
the dispenser.  
Ice cubes are jammed between the ice  
maker arm and back of the bin.  
Ice cubes are frozen together.  
Use the dispenser often so that cubes do  
not freeze together.  
Ice cubes that have been purchased or  
made in some other way have been  
used in the dispenser.  
Only the ice cubes made by the ice maker  
should be used with the dispenser.  
Household water line valve is not open.  
See problem Icemaker is not making  
any ice.  
Open household water line valve.  
Dispenser will  
not dispense  
water.  
Refrigerator or freezer door is not closed.  
Water has been in the tank for too long.  
Be sure both doors are closed.  
Draw and discard 7 glasses of water  
to freshen the supply. Draw and discard  
an additional 7 glasses to completely rinse  
out tank.  
Water has an  
odd taste  
and/or odor.  
Connect unit to cold water line which  
supplies water to kitchen faucet.  
Unit not properly connected to cold  
water line.  
This sound is normally made when automatically made ice is dropped into ice storage  
bin. Volume may vary according to refrigerators location.  
Sound of ice  
dropping  
This sound is normally made when ice maker is supplied with water after dropping  
the automatically made ice.  
Sound of water  
supply  
Other  
Please thoroughly read Automatic icemaker and dispenser in this manual.  
CUSTOMER ASSISTANCE NUMBERS:  
To Prove Warranty Coverage  
Retain your Sales Receipt to prove date of purchase.  
A copy of your Sales Receipt must be submitted at the time warranty service is provided.  
To Obtain Product, Customer or Service Assistance  
Call Toll-free for Customer Service  
Tel : 1-800-243-0000  
To Obtain Nearest Authorized Service Center  
Call 1-800-243-0000, push option #1, 24 hours a day, 7days per week.  
Please have your product type (Monitor, TV, VCR, MWO, Refrigerator) and ZIP code ready.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lexmark Printer X5470 User Manual
LG Electronics Computer Drive GGW H20N User Manual
Lincoln Automobile 2011 MKX User Manual
Lincoln Electric Welding System SVM172 A User Manual
Lindy Switch V121 User Manual
LOREX Technology Security Camera LW1010 User Manual
Louisville Tin and Stove Furnace W255F User Manual
Magic Chef Microwave Oven MCM1110ST User Manual
Marantz Flat Panel Television PV6480 User Manual
Melissa Clothes Dryer 770 056 User Manual