Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
Model number
Serial number
:
:
AF115
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
LCOS PROJECTOR
Warning
This is a class B product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Safety Instructions....................................4
SCREEN Menu Options
To Change PJT Mode .....................................24
Using Aspect Ratio Function...........................24
Using Keystone Function................................25
Test Pattern Funciton......................................25
Auto configure Function..................................25
RGB Config. Function.....................................26
Screen Reset Function ...................................26
Names of parts
Main Body.......................................................7
Connecting Part ..............................................8
Control Panel ..................................................9
Remote Control...............................................10
Installing Batteries...........................................10
Projector Status Indicators..............................11
Accessories.....................................................12
Optional Extras ...............................................12
OPTION Menu Options
Using Still Function .........................................27
Selecting Language ........................................27
Using Blank Function......................................27
Selecting Blank image color ...........................28
Sleep time Function ........................................28
Auto sleep Function ........................................29
Option Reset Function ....................................29
Installing and Composition
Installation Instructions ...................................13
Positioning the Projector.................................14
Using Kensington Security System.................15
Turning on the Projector .................................16
Turning off the Projector .................................16
Focus and Position of the Screen Image........17
Selecting source mode ...................................17
INFORMATION Menu Options
To See The Projector Information...................29
Connection
Information
Connecting to a Desktop PC ..........................18
Connecting to a Video Source........................18
Connecting to a DVD......................................19
Connecting to a D-TV Set-Top Box ................19
Supported Monitor Display..............................30
Maintenance....................................................31
Replacing the Lamp........................................32
Specifications..................................................35
Function
PICTURE Menu Options
Picture mode...................................................20
Adjusting Video ...............................................20
ADV.PICTURE Menu Options
Auto Iris Funtion..............................................21
Advanced Control Function.............................21
Advanced Picture Reset Funciton ..................23
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by your government or your local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Safety Instructions
Please take note of the safety instructions to prevent any potential accident or misuse of the projector.
➟ Safety Instructions are given in two forms as detailed below.
WARNING : The violation of this instruction may cause serious injuries and even death.
NOTES : The violation of this instruction may cause light injuries or damage to the projector.
After reading this manual, keep it in the place that the user can access it easily.
➟
Indoor Installation
WARNING
Do not place the Projector in direct
sunlight or near heat sources such
Do not place inflammable materi-
als beside the projector
Do not allow children to hang on
the installed projector.
as radiators, fires and stove etc.
They may cause the projector to fall,
causing injury or death.
This may cause a fire hazard !
This may cause a fire hazard !
Indoor Installation
NOTES
Disconnect the power and
remove all connections before
moving.
Do not place the projector close
to sources of steam or oil such
as a humidifier.
Do not place the projector where
it might be exposed to dust.
This may cause a fire hazard or
damage to the unit!
This may create a fire hazard or an
electric shock hazard !
When installing the projector on a
table, be careful not to place it
near the edge.
Only use the projector on a level
and stable surface.
Ensure good ventilation around the
projector. The distance between
the projector and the wall should
be more than 30cm/12 inches.
It may fall and cause injury and/or
damage to the unit.
This may cause the projector to fall
causing serious injury to a child or
adult and serious damage to the
projector.
An excessive increase in its internal
temperature may cause a fire hazard or
damage to the unit!
Only use a suitable stand.
Do not place the projector directly on a carpet, rug or place where
ventilation is restricted.
Do not block the vents of the pro-
jector or restrict air-flow in any way.
This would cause its internal temperature to increase and might create a fire
hazard or damage the unit.
This would cause the internal tempera-
ture to increase and could cause a fire
hazard or damage to the unit!
Outdoor Installation
WARNING
Do not use the projector in a damp place such as a bathroom where it is likely to get wet.
This may cause a fire or an electric shock hazard !
Power
WARNING
Earth ground wire should be con-
The power plug should be inserted
Do not place heavy objects on
nected.
fully into the power outlet to avoid a the power cord.
fire hazard !
If the earth ground wire is not connected,
there is a possible danger of electric shock!
If grounding methods are not possible, a
separate circuit breaker should be installed
by a qualified electrician.
This may cause a fire or an electric
shock hazard !
This may cause a fire hazard or damage
the unit.
Do not connect ground to telephone wires,
lightning rods or gas pipe.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Power
WARNING
NOTES
Do not use too many plugs on the same outlet.
It may result in overheating of the outlet and cause a fire hazard !
Power
Never touch the power plug with
a wet hand
Hold the plug firmly when unplug- Prevent dust collecting on the
ging. If you pull the cord, it may
be damaged.
power plug pins or outlet.
This may cause an electric shock
hazard !
This may cause a fire hazard !
This may cause a fire hazard !
Do not plug when the power cord
or the plug is damaged or any
part of the power outlet is loose.
Ensure the power cord does not
come into contact with sharp or
hot objects such as a heater.
Place the projector where people
will not trip or tread on the power
lead.
This may cause a fire or an electric
shock hazard or damage to the unit!
This may cause a fire or an electric
shock hazard or damage to the unit!
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not turn the projector On/Off by plugging-in or unplugging the power plug to the wall outlet.
(Do not use the power plug for switch.)
It may cause mechanical failure or could cause an electric shock.
Using
WARNING
Do not place anything containing In case of impact shock or damage Do not allow any objects to fall
liquid on top of the projector such to the projector switch it off and
into the projector.
as flowerpot, cup, cosmetics or
candle.
unplug it from the power outlet and
contact your service center.
This may cause an electric shock
hazard or damage to the unit!
This may cause a fire hazard or
damage to the unit!
This may cause a fire or an electric
shock hazard or damage to the unit!
If water is spilt into the projector
unplug it from the power outlet
immediately and consult your
Service Agent.
Dispose of used batteries care-
fully and safely.
In the event that an image does
not appear on the screen please
switch it off and unplug it from
the power outlet and contact your
Service Agent.
In the case of a battery being
swallowed by a child please consult a
doctor immediately.
This may cause an electric shock
hazard or damage to the unit!
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not touch metal parts during or
soon after operation since the
vents and lamp cover will remain
very hot!
Do not remove any covers
(except lens cover). Or there is a
high risk of Electric Shock!
Don’t look directly onto the lens
when the projector is in use. Eye
damage may occur!
CAUTION concerning Power
Do not overload wall outlets. Overloaded wall outlets,loose or damaged wall outlets, extension cords,
frayed power cords,or damaged or cracked wire insulation are dangerous.Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance. If its appearance indicates
damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service personnel.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Using
WARNING
Never touch the wall outlet when
there is leakage of gas, open the
windows and ventilate.
Do not drop the projector or allow
impact shock.
Don’t look at laser beam directly
as it can cause eye damage!
This may cause mechanical failure or
personal injury !
It can cause a fire or a burn by a
spark.
Always open the lens door or remove the lens cap when the projector lamp is on.
Using
NOTES
Do not place heavy objects on
top of projector.
Take care not to impact the lens
particularly when moving the
projector.
Do not touch the lens of the pro-
jector. It is delicate and easily
damaged.
This may cause mechanical failure or
personal injury!
Do not use any sharp tools on the projector as this will damage the casing.
Cleaning
WARNING
Do not use water while cleaning
the projector
In the unlikely event of smoke or
a strange smell from the projector,
switch it off, unplug it from the
wall outlet and contact your
dealer or service center.
Use an air spray or soft cloth that
is moist with a neutral detergent
and water for removing dust or
stains on the projection lens.
This may cause damage to the
projector or an electric shock hazard.
This may cause a fire or an electric
shock hazard or damage to the unit!
Cleaning
NOTES
Contact the Service
Center once a year to
clean the internal
When cleaning the plastic parts such as projector case, unplug the power and
wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet
cloth. Especially, never use cleanser (glass cleaner), automobile or industrial
shiner, abrasive or wax, benzene, alcohol etc., which can damage the
product. Use an air spray or soft cloth that is moist with a neutral detergent
and water for removing dust or stains on the projection lens.
parts of the projector.
Accumulated dust can
cause mechanical failure.
It can cause fire, electric shock or product damage (deformation, corrosion and damage).
Others
WARNING
Do not attempt to service the projector yourself. Contact your dealer or service center.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty.
Others
NOTES
Refer lamp servicing to qualified
service personnel.
Do not mix new batteries with old
batteries.
Be sure to unplug if the projector
when not used for a long period.
This may cause the batteries to over-
heat and leak.
Accumulated dust may cause a fire
hazard or damage to the unit!
Only use the specified type of battery.
This could cause damage to the remote control.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Names of parts
Main Body
*
The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points
(red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction.
Focus ring
Lens Shift Dial
Zoom ring
Front remote control sensor
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Connecting Part
Rear remote control
sensor
USB(SVC Only)
RGB IN
Control Panel
Kensington Security
System Connector
(Refer to page 15)
VIDEO
COMPONENT IN
AC IN
S-VIDEO
HDMI IN 1/2
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Control Panel
POWER Button
Turn ON/OFF the projector.
INPUT Button
Switches to RGB, HDMI, Video,
S-Video or Component mode.
OK Button
Checks present mode and
saves the function changes.
/
/
/
Button
Adjusts functions of menus
MENU Button
Selects or closes menus.
AUTO Button
It automatically corrects the position and
shaking of the image in RGB mode.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Remote Control
POWER Button
RATIO Button
INPUT Button
AUTO Button
EXIT Button
MENU Button
OK,
/
/
/
Button
Brightness Button
Contrast Button
LIGHT
LIGHT Button
A.IRIS Button
BLANK Button
KEYSTONE Button
PICTURE Button
STILL Button
PATTERN Button
C.TEMP Button
GAMMA Button
SLEEP Button
Installing Batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• Open the battery compartment cover on the back of the
remote control.
• Insert the specified type of batteries with correct polarity,
match “+” with “+”, and match “-” with “-”.
• Install two 1.5V AAA batteries. Don’t mix used batteries with
new batteries.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Projector Status Indicators
* Lamp indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector.
Operation Indicator
Temperature Indicator
ns
Deco LED
(Lens Shift Dial)
Lamp Indicator
Standby.
Red
Unit is in operation (Lamp is turned on)
The lamp is cooling (60 seconds).
Green
Orange(flashing)
Green (flashing)
The projector has been turned off due to excessive heat
(60 seconds).
Operation Indicator
Power off.
Off
/ Temperature Indicator
This is the warning message of excessive heat when the
projector is on.
Orange
Turn the projector off and check the ventilator.
Power has turned off due to problem with the internal
cooling fan. Contact your service center.
Projector lamp is reaching the end of its life and needs
to be replaced with a new lamp.
Red(flashing)
Red
An error has occurred in the projector lamp. Turn the pro-
jector on again after sufficient amount of time. If this indi-
cator flashes red again, contact your local service center.
The lamp cover and filter cover is opened.
Lamp is starting up.
Red(flashing)
Lamp Indicator
Green (flashing)
Blue (flashing)
Deco LED
(Lens Shift Dial)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Accessories
LIGHT
1.5V
Owner’s manual
2 Batteries
CD Owner’s manual
Polishing Cloth
Remote Control
Power Cord
Computer Cable
Video Cable
Filter
Optional Extras
* Contact your dealer to purchase these items.
* The lamp is consumable and needs to be replaced with a new one when it is burned out. Contact your service personnel for replacing of lamp.
* Optional parts can be changed without notice to improve the quality of the product, and new optional parts can be added.
Ceiling mount for projector
SCART to RCA jack
Projection Screen
Lamp
S-Video Cable
Component Cable
HDMI Cable
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Installing and Composition
Installation Instructions
*
Don’t place the projector in the following conditions. It may cause malfunction or product damage.
Provide proper ventilation for this projector.
GThe projector is equipped with ventilation holes(intake)
on the bottom and ventilation holes(exhaust) on the front.
Do not block or place anything near these holes, or internal
heat build-up may occur, causing picture degradation or
damage to the projector.
GDo not place the projector on a carpet, rug or other
similar surface. It may prevent a adequate ventilation
of the projector bottom. This product should be
mounted to a wall or ceiling only.
GNever push projector or spill any kind of liquid into the
projector.
GLeave an adequate distance(30cm/12 inches or more)
around the projector.
Place this projector in adequate temperature and humidity conditions.
G
G
Install this projector only in a location where adequate temperature and humidity is available. (refer p.35)
Don’t place the projector where it can be covered with dust.
This may cause overheating of the projector.
Do not obstruct the slots and openings of the projector. This may cause overheating and create a fire hazard.
This projector is manufactured using high-precision technology. You may, however, see tiny black points and/or
bright points (red, blue, or green) that continuously appear on the projector Screen. This is a normal result of the
manufacturing process and does not indicate a malfunction.
To display DTV programs, it is necessary to purchase a DTV receiver (Set-top Box) and connect it to the projector.
When the remote control does not work during operation.
G
The remote control may not work when a lamp equipped with electronic ballast or a three-wavelength lamp is installed.
Replace those lamps with international standard products to use the remote control normally.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Positioning the Projector
1.Place the projector on a sturdy and horizontal surface.
2.Place the projector the desired distance from the screen. The distance between the projector and the screen deter-
mines the actual size of the image.
3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the
screen image will be crooked. The keystone adjustment may correct this (Refer to page 25.).
4.Once you have positioned the projector, connect the power and any input devices.
projection distance based on the picture format
Lens shift : Max
X/2
Screen
Screen height (X)
Lens shift : 0
X/2
Projection off-set ratio:120%
(Lens shift : Max)
Projection distance (D)
Y/2
Y/2
Screen
Screen Width (Y)
o
Projection distance (D)
16 : 9 Scale
Projection Distance
Tele Distance
Image
Diagonal Size Diagonal Size Horizontal Size
Vertical Size
(mm)
Wide Distance
(mm)
(inch)
(mm)
(mm)
(mm)
30
40
762
664
374
498
877
1605
2152
2699
3246
3794
4341
4888
5435
6530
7624
8719
9813
10907
12002
13096
14191
15285
16380
1016
1270
1524
1778
2032
2286
2540
3048
3556
4064
4572
5080
5588
6096
6604
7112
7620
886
1181
1484
1788
2092
2395
2699
3003
3610
4218
4825
5433
6040
6648
7255
7863
8470
9078
50
1107
1328
1550
1771
1992
2214
2657
3099
3542
3985
4428
4870
5313
5756
6199
6641
623
60
747
70
872
80
996
90
1121
1245
1494
1743
1992
2241
2491
2740
2989
3238
3487
3736
100
120
140
160
180
200
220
240
260
280
300
* The longest/shortest distance
show status when adjusted by
the zoom function.
* You can move an image up to
70% of the screen size from the
lens center.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Using Kensington Security System
GThis projector has a ‘Kensington’ Security System Connector on the side panel. Connect the ‘Kensington’ Security
System cable as below.
GFor the detailed installation and use of the Kensington Security System, refer to the user’s guide included to
the Kensington Security System set.
G
The kensington Security System is an optional item.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Turning on the Projector
1. Connect power cord correctly.
2. Remove the lens cap. If it is left on, it could become deformed due to the heat produced by the
projection lamp.
3. Press the POWER button on the remote control or back cover.
G
An image will appear after the operation deco LED turns (Blue (flashing)).
G
Press the INPUT button on the remote control or the INPUT button on the control panel to select the input signal you want.
* Do not disconnect the power cord while the suction/discharge fan in operation. If the power cord is disconnected during
the suction/ discharge fan in operation, it may takes longer to activate the lamp after turning on the power and the lifespan
of the lamp may be shortened.
Turning off the Projector
1.Press the POWER button on the back cover or remote control.
2.Press the POWER button on the back cover or remote control again to turn off the power.
3.If the operation indicator is flashing orange, in other words the fan is working (60 seconds), do not
disconnect the projector. When the indicator terns red, you may remove the power cord.
G If the operation indicator LED is orange and blinking, the power button on the back cover or on the remote control will not
operate.
Power off?
Please press Power key again.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Focus and Position of the Screen Image
When an image appears on the screen, check if it is in focus and fits the screen well.
Focus ring
Zoom ring
G To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens.
G To adjust the size of the image, rotate the zoom ring which is the under ring on the lens.
When you need to move the screen image up or down, use the Lens shift dial on the pro-
jector to adjust the height as shown below.
Lens shift Dial
G Turn the Lens shift dial left or right to adjust the projector image up or down.
Turning the Lens shift dial with excessive power may cause damage to the projector.
Selecting source mode
1. Press the INPUT button.
Input List
RGB
HDMI1
HDMI2
Video
S-Video
Component
2. Selecting an input signal with the INPUT button will only change the projector only to connected
inputs. You can change it to any inputs with the button.
,
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connection
Connecting to a Desktop PC
* You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output.
* Refer to page 30 for resolutions the projector supports.
< How to connect >
Connect the RGB IN of the projector and the computer output port
with computer cable.
* You may have to change the resolution that your PC
exports to one supported by the projector. Refer to page 30.
This projector may not support output from laptops when
the laptop screen is on.
Connecting to a Video Source
* You can connect a VCR, a camcorder or any other compatible video image source to the projector.
< How to connect 1 >
a. Connect the Video input jacks of the projector to the output jacks
of the A/V source with Video cable.
S
VIDEO
(R)
AUDIO (L)
VIDO
OUT
IN
< How to connect 2 >
b. Connect the S-Video input jack of the projector to the
S-Video output jack of an A/V source with an S-Video cable.
* S-Video supports better video quality than a regular A/V connection.
<VCR>
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connecting to a DVD
* The output jacks (Y, PB, PR) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.
< How to connect >
Component cable
a.Connect the DVD component cable to the Y, PB and PR of
the COMPONENT IN of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, PB=blue, PR=red)
(R) AUDIO (L)
Y
PB
PR
<DVD>
b.You may use HDMI instead of component if available on the
DVD player. HDMI supports better quality than component.
Component
HDMI
X
Signal
480i
O
O
O
O
O
O
O
O
480p
720p
1080i
1080p
576i
O
O
O
X
O
576p
Connecting to a D-TV Set-Top Box
* To receive D-TV programs, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector.
* Please refer to the owner's manual of the D-TV Set-Top Box for the connection between the projector and D-TV Set-Top Box.
< How to connect a HDMI source >
<D-TV Set-Top Box>
a.Connect the HDMI IN of the projector and the HDMI output
port of the DTV set-top box with an HDMI cable.
HDMI OUTPUT
DTV OUTPUT
(R)
AUDIO (L)
DVI OUTPUT
Y
PB
PR
b.Set the DTV receiver's resolution to one of the following:
480p(576p)/720p/1080i/1080p mode.
HDMI Cable
Component cable
< How to connect a Component source >
a.Connect the component cable connected to the DTV set-top box
to the Y, PB and PR of the COMPONENT IN of the projector.
* When connecting the component cable, match the jack colors.
(Y=green, PB=blue, PR=red)
DTV OUTPUT
(R)
AUDIO (L)
DVI OUTPUT
Y
PB
PR
<D-TV Set-Top Box>
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Function
* In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to
help with the Projector operation.
* This operating guide explains operation of RGB(PC) mode mainly.
PICTURE Menu Options
Picture mode
* Use Picture mode function to set the projector for the best picture appearance.
1. Press the PICTURE button on the remote control.
2. Press the
,
button to adjust the screen condition as you want.
G
Each press of the
,
button changes the screen as shown below.
Standard
Vivid
Cinema
Sport
Game
F
G
F
G
F
G
F
F
G
G
Expert2
Expert1
F
G
F
G
G
G
You can use this function through the MENU button.
To exit the menu display, press the EXIT button.
Adjusting Video
1. Press the MENU button. Then, move to PICTURE with the
,
,
,
buttons and press the OK button.
Move
OK
PICTURE
Picture Mode
: Standard
• Contrast
• Brightness 50
2. Move to a sub-item with the
move to a desired function and press the OK button.
button. Then, use the
,
buttons to
50
• Sharpness
• Color
70
70
0
3. Use the
,
buttons to make a desired adjustment and then press the
R
G
• Tint
OK button.
• Picture Reset
G
G
You can set image values differently for each input and Picture Mode.
Saving after making adjustments will display (User) in adjusted Picture
Mode. (except Expert 1/2)
Execute Picture Reset for Picture Mode to restore back to default factory
settings.
G
G
You can adjust contrast by pressing the
You can adjust brightness by pressing the
Press the MENU or EXIT button to exit the menu screen.
button on the remote control.
button on the remote control.
G
G
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
ADV. PICTURE Menu Options
Auto Iris Function
* This function adjusts the brightness of the entire image depending on inputted image to provide optimum
image quality.
1. Press the A.IRIS button on the remote control.
2. Press the
,
button to adjust the screen condition as you want.
G
Each press of the
,
button changes the screen as shown below.
Off
Auto Iris1
F
G
F
G
Auto Iris3
Auto Iris2
F
G
F
G
G
G
You can use this function through the MENU button.
To exit the menu display, press the EXIT button.
< When Picture Mode is
Vivid/Standard/Cinema/Sport/Game >
Advanced Control Function
1. Press the MENU button. Then, move to ADV. PICTURE with the
buttons and press the OK button.
•Fresh Contrast
Off
Off
G
ADV. PICTURE
F
,
,
,
Auto Iris
•Fresh Colour
Advanced Cont
Natural
On
•Color Temp.
2. Move to a sub-item with the
to move to Advanced Control and press the OK button.
button. Then, use the
,
buttons
Adv. Picture Res
•Noise Reduction
•Gamma
Low
Off
•Real Cinema
•Black Level
•Lamp Mode
3. Move to a desired item with the
,
buttons and then press the
Low
High
OK button.
E
4. Use the
press the OK button.
,
buttons to make a desired adjustment and then
< When Picture Mode is Expert 1/2 >
F
Off
Off
G
ADV. PICTURE
•Fresh Contrast
G
You can set image values differently for each input and Picture Mode.
Press the MENU or EXIT button to exit the menu screen.
•Fresh Colour
Auto Iris
G
Expert Control
On
•Noise Reduction
Adv. Picture Res
•Real Cinema
Off
Low
High
100
•Black Level
•Lamp Mode
•Overscan
Gamma Mode
Preset
E
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
G Fresh Contrast : Adjusts contrast to optimum levels depending on image brightness.
•Fresh Contrast
Low
High
Off
F
G
F
G
F
G
OK
G Fresh Colour : Adjusts image colors close to natural colors.
•Fresh Colour
Off
Low
High
F
G
F
G
F
G
OK
G Color Temp : Selects the mood of screen colors.
•Color Temp.
Medium
OK
Cool
Natural
Warm
F
G
F
G
F
G
F
G
G
You can also use the C.TEMP button on the remote control.
G Noise Reduction : Removes noise from image without damaging it.
•Noist Reduction
On
Off
F
G
F
G
OK
G
You can use it only in Video, S-Video, Component(480i, 480p, 576i, 576p) and HDMI(480p, 576p) modes.
G Gamma : Sets the intensity of the picture.
•Gamma
Low
Medium
High
F
G
F
G
F
G
OK
G
You can also use the GAMMA button on the remote control.
G Real Cinema : Set up the picture for the best picture appearance for viewing movies.
•Real Cinema
Off
On
F
G
F
G
OK
G
You can use it only in Video, S-Video, Component(480i/576i/1080i 50/60Hz, 1080p 24Hz) and
HDMI(1080i 50/60Hz, 1080p 24Hz) modes.
G Black Level : Adjusting the contrast and the brightness of the screen using the black level of the screen.
•Black Level
Low
High
F
G
F
G
OK
G
You cannot set this function in SECAM, PAL 60 and PAL BGDK signals of Video, S-Video and RGBmodes.
G Lamp Mode : Adjusts the lamp brightness.
•Lamp Mode
High
Low
F
G
F
G
OK
G Overscan : You can adjust from 90, 92, 94...100.
•Overscan
~
90
100
F
G
F
G
OK
G
This function cannot be set when PC signal is input, the signal is 1080i and 1080p or Aspect Ratio is set as Justscan.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
G Gamma Mode : You can select this mode only when Picture Mode is Expert 1/2.
•Gamma Mode
Preset
User
F
G
F
G
OK
G
Adjustment : You can select Low, Medium or High.
Level : You can adjust from 0 to 8.
IRE : Automatically set from 0 to 100 according to Level change.
Red/Green/Blue : You can adjust from -127 to 127.
G
G
G
G White Balance : Adjusts the overall feeling of the screen to your choice. You can select this function only
when Picture Mode is Expert 1/2.
•White Balance
Medium
Cool
Natural
Warm
F
G
F
G
F
G
F
G
OK
•Red Contrast
~
~
-30
0
30
F
G
F
G
F
G
OK
G
Red/Green/Blue Contrast : You can adjust from -30 to 30.
Red/Green/Blue Brightness : You can adjust from -30 to 30.
G
Advanced Picture Reset Function
* Settings of the selected ADV PICTURE function for each input and Picture Mode return to the default factory settings.
1. Press the MENU button. Then, move to ADV. PICTURE with the
Move
OK
ADV. PICTURE
,
,
,
buttons and press the OK button.
Auto Iris
: Auto Iris1
Advanced Control
Adv. Picture Reset
2. Move to a sub-item with the
button. Then, use the
,
buttons to
move to Adv. Picture Reset and press the OK button.
3. Move to Yes with the
,
buttons and then press the OK button.
G
Press the MENU or EXIT button to exit the menu screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
SCREEN Menu Options
To Change PJT Mode
* This function turns the projected image upside down or flips horizontal.
Move
OK
SCREEN
1. Press the MENU button. Then, move to SCREEN with the
buttons and press the OK button.
,
,
,
PJT Mode
: Front
: 16 : 9
Aspect Ratio
Keystone
2. Move to a sub-item with the
button. Then, use the
,
buttons to
Test Pattern
RGB Config.
Screen Reset
move to PJT Mode and press the OK button.
3. Move to a desired item with the
button.
,
buttons and then press the OK
G
Select Rear when projecting from the back of the transparent screen purchased separately.
Select Ceiling when installing the product on the ceiling.
Press the MENU or EXIT button to exit the menu screen.
G
G
Using Aspect Ratio Function
1. Press the RATIO button on the remote control.
2. Use the
,
buttons to select a desired screen size.
Auto
4 : 3
F
G
F
G
Just Scan
16 : 9
F
G
F
G
G
You can use this function through the MENU button.
To exit the menu display, press the EXIT button.
G
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can’t get the best angle of projection.
1. Press the KEYSTONE button of remote control.
Move
Prev.
MENU
Keystone
2. Move to a desired item with the
,
buttons and then press the
button.
Top Left
G
Top Right
Bottom Left
Bottom Right
Reset
3. Press the button to adjust the screen condition as you want and
then press the OK button.
,
,
,
H :
V :
0
0
G
Keystone can be adjusted from -100 to 100.
Execute Reset to restore back to default factory settings.
You can use this function through the MENU button.
G
G
G
To exit the menu display, press the EXIT button.
Test Pattern Function
* Execute this function when installing the projector to adjust the screen size and focus.
Press the PATTERN button of remote control.
G
You can use this function through the MENU button.
To exit the menu display, press the EXIT button.
G
Auto configure Function
* This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization
of the image.
* Auto Tracking function works in RGB PC input only.
1. Press the AUTO button of the remote controller.
Auto RGB Config.
G
Image positioning and synchronization are automatically adjusted.
2. After automatic adjustments, if further manual adjustments are needed
depending on PC RGB Config. on the SCREEN menu. In certain
Auto configuration is on the process.
Please wait a moment.
circumstances, you can’t get the best picture quality by only using
auto-correction.
You can also use this function by using the MENU button. (Only in RGB mode)
For best results, perform this function while displaying a still image.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
RGB Config. Function
1. Press the MENU button. Then, move to SCREEN with the
and press the OK button.
,
,
,
buttons
RGB Config.
Auto Configure
Phase
Move
OK
G
2. Move to a sub-item with the
button. Then, use the
,
buttons to move to
Auto Configure?
RGB Config. and press the OK button.
Clock
Yes
No
Position
3. Move to a desired item with the
,
buttons and then press the
button.
4. Press the button to adjust the screen condition as you want and
,
,
,
then press the OK button.
G
The Auto Configure function operates only for RGB input. If you execute
screen adjustment for a video from PC graphic signal, optimal state may not be
found. Execute the Auto Configure function for a still image.
The variable range can be different depends on input resolutions.
G
G
To exit the menu display, press the EXIT button.
Screen Reset Function
* Settings of the selected SCREEN modes return to the default factory settings.
Move
OK
SCREEN
1. Press the MENU button. Then, move to SCREEN with the
,
,
,
buttons and press the OK button.
PJT Mode
: Front
: 16 : 9
Aspect Ratio
Keystone
2. Move to a sub-item with the
button. Then, use the
,
buttons to move
Test Pattern
RGB Config.
Screen Reset
to Screen Reset and press the OK button.
3. Move to Yes with the
,
buttons and then press the OK button.
G
Press the MENU or EXIT button to exit the menu screen.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
OPTION Menu Options
Using Still Function
1. Press the STILL button on the remote control.
* You can freeze the input image.
<Moving Image>
<Still Image>
2. To exit STILL, press any button.
* The STILL function will release automatically after approximately 10 minutes.
Selecting Language
1. Press the MENU button. Then, move to OPTION with the
buttons and press the OK button.
,
,
,
Move
OK
OPTION
Language
: English
: Blue
: Off
Blank Image
Sleep Time
Auto Sleep
Option Reset
2. Move to a sub-item with the
button. Then, use the
,
buttons to
move to Language and press the OK button.
: Off
3. Move to a desired item with the
button.
,
buttons and then press the OK
G
On-Screen-Display (OSD) is displayed in the selected language.
G
Press the MENU or EXIT button to exit the menu screen.
Using Blank Function
*This function may be effective if you need to get the attention of the audience during presentations, meetings or briefings.
1. Press the BLANK button on the remote control.
G
The screen turns off to a background color.
G
You can choose the background color.
(Refer to ‘Selecting Blank image color’)
2. Press any button to cancel the blank function.
G
To temporarily turn off the lamp, press BLANK on the remote control. Do not block the projection lens with any objects when
the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Selecting Blank image color
Move
OK
OPTION
1. Press the MENU button. Then, move to OPTION with the
,
,
,
buttons and press the OK button.
Language
: English
: Blue
: Off
Blank Image
Sleep Time
Auto Sleep
Option Reset
2. Move to a sub-item with the
button. Then, use the
,
buttons to move
: Off
to Blank Image and press the OK button.
3. Move to a desired item with the
button.
,
buttons and then press the OK
G
Background color will be altered to the selected Blank function color.
G
Press the MENU or EXIT button to exit the menu screen.
Sleep time Function
* The sleep timer turns the projector off at the preset time.
1. Press the SLEEP button of remote control.
2. Press the
,
button to select the desired preset time.
G
Each press of the
,
button changes the screen as shown below.
Off
10 Min
20 Min
30 Min
60 Min
90 Min
F
G
F
G
F
G
F
F
F
G
G
G
240 Min
180 Min
120 Min
F
G
F
G
F
G
G
G
You can use this function through the MENU button.
To exit the menu display, press the EXIT button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Auto sleep Function
* This function turns the projector off automatically after 10 minutes is passed
when there is no signal.
Move
OK
OPTION
Language
: English
: Blue
: Off
Blank Image
Sleep Time
Auto Sleep
Option Reset
1. Press the MENU button. Then, move to OPTION with the
,
,
,
buttons and press the OK button.
: Off
2. Move to a sub-item with the
button. Then, use the
,
buttons to move
to Auto Sleep and press the OK button.
3. Move to On with the
,
buttons and then press the OK button.
G
Press the MENU or EXIT button to exit the menu screen.
Option Reset Function
* Settings of the selected OPTION modes return to the default factory settings.
1. Press the MENU button. Then, move to OPTION with the
,
,
,
Move
OK
OPTION
buttons and press the OK button.
Language
: English
: Blue
: Off
Blank Image
Sleep Time
Auto Sleep
Option Reset
2. Move to a sub-item with the
button. Then, use the
,
buttons to move
: Off
to Option Reset and press the OK button.
3. Move to Yes with the
,
buttons and then press the OK button.
G
Press the MENU or EXIT button to exit the menu screen.
INFORMATION Menu Options
To See The Projector Information
1. Press the MENU button. Then, move to INFORMATION with the
Move
INFORMATION
,
,
,
buttons and press the OK button.
Serial No.
Lamp Time
Input
: AF115-JS
Hr
:
9
2. You can see the current information of the projector.
: HDMI2
: 480p
Resolution
Fh/Fv
G
Press the MENU or EXIT button to exit the menu screen.
: 31.5KHz/60.1Hz
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Supported Monitor Display
* The following table lists the display formats supported by the projector.
Sources
Format
Vertical Freq.(Hz)
Horizontal Freq.(kHz)
* If the projector does not support the input signal, “Out of Range” message appears on the screen.
* The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor)
* The Synchronization input form for horizontal and vertical frequencies are Separate.
<DVD/DTV Input>
Signal
Component-*1 HDMI(DTV)-*2
480i
480p
720p
1080i
1080p
576i
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
O
X
NTSC(60Hz)
576p
720p
1080i
1080p
1080p
O
O
O
O
O
PAL(50Hz)
24/25/30Hz
* Cable type
1- Component Cable
2- HDMI Cable
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Maintenance
* The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to
be replaced, contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface of it. Wipe the lens surface gently with an air spray or a soft, dry lint-free cloth.
To remove dirt or stains on the lens, moisten a soft cloth with water and a neutral detergent and wipe the lens surface gently.
Cleaning the Projector Case
To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with a soft, dry, lint-free cloth. To remove stubborn dirt
or stains, moisten a soft cloth with water and a neutral detergent and then wipe the casing.
Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored.
Cleaning the Filter
When prompted to clean the filter while using the projector, take the following steps to clean it.
Turn off the projector and unplug the power cable.
Turn the filter cover upside down, take the filter
Turn it upside down and place it on a table or
3
1
2
out and remove dust from it.
flat surface.
(When the filter is damaged, use additionally-
provided new filer.)
Filter
Press as indicated by arrows with both hands
and remove the filter cover.
Insert the filter into the cover. Fit the cover onto
the projector and press it until a click sound is
Filter cover
4
heard.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Replacing the Lamp
Lamp Replacement
The change interval of lamp may depend on the use environment of Projector. You
can see the used lamp time in the CHECKING LAMP TIME section of the Menu
(page.29). You must replace the lamp when:
<Top panel of the Projector>
ns
G The projected image gets darker or starts to deteriorate.
G The lamp indicator is red.
G The message “Replace the lamp” appears on the screen when turning the
projector on.
Lamp indicators
Be careful when replacing lamp
- Press the POWER button on the control panel or remote control to turn off power.
- If the operation indicator LED is orange and blinking, do not disconnect the main supply until the operation indicator LED
is lit up constantly (red).
- Allow the lamp to cool for 1 hour before replacing it.
- Replace only with the same type lamp from an LG Electronics Service Center. Using another manufacturers lamp may
cause damage to the Projector and lamp.
- Pull out the lamp only when replacing the lamp.
- Keep the lamp unit out of reach of children. Keep the Lamp away from heat sources such as radiators, stoves etc.
- To reduce the risk of fire do not expose the lamp to liquids or foreign materials.
- Do not place the lamp near any heat source.
- Make sure the new lamp is securely tightened with screws. If not, the image may be dark or there could be an increased
risk of fire.
- Never touch the glass on the lamp. Image quality may be compromised or lamp life maybe reduced.
To obtain a replacement Lamp unit
Lamp model number is on page 35. Check the lamp model and then purchase it from an LG Electronics Service Center.
Using another manufacturers lamp may cause damage to the projector.
Lamp unit disposal
Dispose of the used lamp by returning it to the LG Electronics Service Center.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Replacing the Lamp
Turn off the projector and unplug the power cable.
Unscrew the screw from the lamp cover using a
screwdriver.
1
2
Carefully place on a cushioned surface.
(Allow the lamp to cool for 1 hour before
removing the used lamp from the projector.)
Lamp case screw
After lifting the lamp cover off, remove the two
retaining screws on the lamp case with a screw-
driver.
Lift the lamp up from the projector.
4
3
Screws
bottom
Knob
Insert the new lamp gently into the correct position.
Push the lamp bottom to check if it is correctly
Pull out the handle slowly and remove the lamp
6installed.
5case.
Close the lamp cover and install the screws from
step 2 to install the cover.
8
Tighten the screws you removed in step 3.
7
(If the lamp cover is not installed correctly the unit will not
power on.)
(Make sure they are fixed firmly.)
Using another manufacturers lamp may cause damage to the projector or lamp.
Make sure the lamp cover is securely fastened. If the lamp cover is not installed correctly the unit will not power on.
If this fault persists contact an LG Authorized Service Center.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Regarding the projector lamp control
WARNING
G Don’t turn off the projector at least in 5 minutes after activating it.
- The frequent On/Off changes may cause the lamp to deteriorate.
G Don’t pull out the power cord while the projector or the cooling fan are running.
- It may shorten the life of the lamp.
G The life-span of depends on the environment its used in and how well its treated.
G The projector uses a high pressure mercury lamp. Shock or abuse to the projector can cause the lamp to burst.
G Continuing to use a lamp the projector has indicated needs replacement may burst.
G If the lamp burst, perform the following:
- Remove the power cord immediately.
- Let some fresh air in immediately (Ventilation).
- Have a service center check the projector's condition and replace the lamp.
- Do not disassemble the projector.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Specifications
AF115 (AF115-JS)
MODEL
1920(Horizontal) x 1080(Vertical)pixel
Resolution
16 : 9 (horizontal:vertical)
Horizontal / Vertical Ratio
LCOS panel size
0.61 inches
Wide : 0.9 ~ 9.1m(30 ~ 300 inches)
Screen size
(Projection distance)
Tele : 1.6 ~ 16.4m(30 ~ 300 inches)
120%
Projection off-set ratio
Remote control distance
Zoom ratio
12m
1:1.8
NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N/PAL 60
Video compatibility
Power
AC 100 - 240V~50/60Hz, 3.0A-1.2A
173/6.8
366/14.4
447.5/17.6
3.42/7.5
Height(mm/inches)
Breadth(mm/inches)
Length(mm/inches)
Weight(kg/pound)
Operating Condition
Temperature
Projector Lamp
Lamp model
In operation : 32~104°F(0°C~40°C)
In storage and transit : -4~140°F(-20°C~60°C)
AJ-LAF1
Humidity
Lamp power consumption
In operation : 0~ 75% relative humidity by dry hygrometer
Not in operation : 0 ~ 85% relative humidity by dry hygrometer
220W
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|