LG Electronics Home Theater System HB906TA User Manual
OWNER’S MANUAL  
Network 3D Blu-ray™  
Home Theater  
Please read this manual carefully before operating  
your set and retain it for future reference.  
HB906TA (HB906TA, SH96TA-S, SH96SB-C, SH96TA-W)  
P/NO : SAC35095615  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
3
Safety Information  
CAUTION  
CAUTION: This product employs a Laser System.  
To ensure proper use of this product, please read  
1
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
this owner’s manual carefully and retain it for future  
reference. Shall the unit require maintenance,  
contact an authorized service center.  
Use of controls, adjustments or the performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
To prevent direct exposure to laser beam, do not try  
to open the enclosure. Visible laser radiation when  
open. DO NOT STARE INTO BEAM.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK DO NOT REMOVE COVER (OR BACK) NO  
USER-SERVICEABLE PARTS INSIDE REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
This lightning flash with arrowhead  
symbol within an equilateral triangle  
is intended to alert the user to the  
presence of uninsulated dangerous  
voltage within the product’s  
CAUTION concerning the Power Cord  
Most appliances recommend they be placed upon  
a dedicated circuit;  
enclosure that may be of sufficient magnitude to  
constitute a risk of electric shock to persons.  
That is, a single outlet circuit which powers only  
that appliance and has no additional outlets or  
branch circuits. Check the specification page of this  
owner’s manual to be certain. Do not overload wall  
outlets. Overloaded wall outlets, loose or damaged  
wall outlets, extension cords, frayed power cords, or  
damaged or cracked wire insulation are dangerous.  
Any of these conditions could result in electric  
shock or fire. Periodically examine the cord of your  
appliance, and if its appearance indicates damage  
or deterioration, unplug it, discontinue use of the  
appliance, and have the cord replaced with an  
exact replacement part by an authorized service  
center. Protect the power cord from physical or  
mechanical abuse, such as being twisted, kinked,  
pinched, closed in a door, or walked upon. Pay  
particular attention to plugs, wall outlets, and  
the point where the cord exits the appliance. To  
disconnect power from the mains, pull out the  
mains cord plug. When installing the product,  
ensure that the plug is easily accessible.  
The exclamation point within an  
equilateral triangle is intended  
to alert the user to the presence  
of important operating and  
maintenance (servicing)  
instructions in the literature accompanying the  
product.  
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK  
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN  
OR MOISTURE.  
WARNING: Do not install this equipment in a  
confined space such as a book case or similar unit.  
CAUTION: Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the  
product and to protect it from over heating. The  
openings shall be never be blocked by placing  
the product on a bed, sofa, rug or other similar  
surface. This product shall not be placed in a built-  
in installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturer’s  
instruction has been adhered to.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Getting Started  
This device is equipped with a portable battery or  
accumulator.  
Safety way to remove the battery or the  
battery from the equipment: Remove the  
old battery or battery pack, follow the steps  
in reverse order than the assembly. To prevent  
contamination of the environment and bring on  
possible threat to human and animal health, the  
old battery or the battery put it in the appropriate  
container at designated collection points. Do  
not dispose of batteries or battery together with  
other waste. It is recommended that you use  
local, free reimbursement systems batteries and  
accumulators. The battery shall not be exposed to  
excessive heat such as sunshine, fire or the like.  
1
CAUTION: The apparatus shall not be exposed to  
water (dripping or splashing) and no objects filled  
with liquids, such as vases, shall be placed on the  
apparatus.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
5
Notes on Copyrights  
Important Notice for TV colour  
system  
The colour system of this player differs according to  
currently playing discs.  
Because AACS (Advanced Access Content  
System) is approved as content protection  
system for BD format, similar to use of CSS  
(Content Scramble System) for DVD format,  
certain restrictions are imposed on playback,  
analog signal output, etc., of AACS protected  
contents. The operation of this product and  
restrictions on this product may vary depending  
on your time of purchase as those restrictions  
may be adopted and/or changed by AACS after  
the production of this product.  
y
1
For example, when the player plays the disc  
recorded in the NTSC colour system, the image is  
output as an NTSC signal.  
Only the multi system colour TV can receive all  
signals output from the player.  
If you have a PAL colour system TV, you will see  
just distorted images when using discs or video  
contents recorded in NTSC.  
y
Furthermore, BD-ROM Mark and BD+ are  
additionally used as content protection systems  
for BD format, which imposes certain restrictions  
including playback restrictions for BD-ROM  
Mark and/or BD+ protected contents. To obtain  
additional information on AACS, BD-ROM  
Mark, BD+, or this product, please contact an  
authorized Customer Service Centre.  
y
The multi system colour TV changes the colour  
system automatically according to input signals.  
In case that the colour system is not changed  
automatically, turn it off and then on to see  
normal images on screen.  
y
Even if the disc recorded in NTSC colour system  
are well displayed on your TV, these may not be  
recorded correctly on your recorder.  
y
Many BD-ROM/DVD discs are encoded with  
copy protection. Because of this, you should only  
connect your player directly to your TV, not to a  
VCR. Connecting to a VCR results in a distorted  
picture from copy-protected discs.  
y
y
This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Rovi, and is intended for home and  
other limited viewing uses only unless otherwise  
authorized by Rovi. Reverse engineering or  
disassembly is prohibited.  
Under the U.S. Copyright laws and Copyright  
laws of other countries, unauthorized recording,  
use, display, distribution, or revision of television  
programs, videotapes, BD-ROM discs, DVDs, CDs  
and other materials may subject you to civil and/  
or criminal liability.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Table of Contents  
3
System Setting  
Table of Contents  
30 Settings  
30 – Adjust the Setup Settings  
30 – [DISPLAY] Menu  
32 – [LANGUAGE] Menu  
32 – [AUDIO] Menu  
33 – [LOCK] Menu  
34 – [NETWORK] Menu  
35 – [OTHERS] Menu  
37 Sound Effect  
1
Getting Started  
3
8
8
Safety Information  
Introduction  
– Playable Discs and symbols used in  
this manual  
– About the “7” Symbol Display  
9
10 – File compatibility  
11  
– AVCHD (Advanced Video Codec High  
Definition)  
– About DLNA  
4
Operating  
38 General Playback  
38 – Using [HOME] menu  
38 – Playing a Disc  
11  
12 – Certain System Requirements  
12 – LG Remote  
38 – Playing a file on a disc/USB device  
39 – Playing Blu-ray 3D disc  
39 – Enjoying BD-Live™  
12 – WOL (Wake On LAN)  
12 – Regional Code  
12 – Compatibility Notes  
40 – Playing a file on a network server  
13  
14  
15  
Remote control  
Front panel  
Rear panel  
41  
– Basic operations for video and audio  
content  
42 – Basic operations for photo content  
42 – Using the disc menu  
2
Connecting  
42 – Resume playback  
43 Advanced Playback  
43 – Repeat Playback  
43 – Repeating a specific portion  
44 – Marker Search  
44 – Using the search menu  
45 – Changing content list view  
45 – Viewing content information  
45 – Selecting a subtitle file  
46 – Last Scene Memory  
16  
Assembling the speaker (Front/Rear)  
18 Positioning the system  
19 Speaker Connection  
19 – Attaching the speakers to the player  
20 Connecting to Your TV  
20 – HDMI Connection  
21 – What is SIMPLINK?  
22 – Component Video Connection  
22 – Video Connection  
46 – Applying your photo to the Wallpaper  
46 – Options while viewing a photo  
47 – Listening to music while slide show  
47 On-Screen display  
47 – Displaying content information on-  
screen  
48 – Playing from selected time  
48 – Hearing a different audio  
49 – Selecting a subtitle language  
49 – Watching from a different angle  
49 – Changing the TV Aspect Ratio  
49 – Changing subtitle code page  
23 – Resolution Setting  
23 Antenna connection  
24 Connections with external device  
24 – AUX Connection  
24 – PORT. IN connection  
25 – OPTICAL IN connection  
26 Connecting to your Home Network  
26 – Wired network connection  
27 – Wired Network Setup  
29 USB device connection  
29 – Playback content in the USB device  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
7
50 – Changing the Picture Mode  
50 Audio CD Recording  
52 Viewing information from Gracenote  
Media Database  
53 Radio Operations  
1
53 – Listening to the radio  
53 – Presetting the Radio Stations  
53 – Deleting a saved station  
53 – Deleting all the saved stations  
53 – Improving poor FM reception  
54 Using the Premium  
2
3
4
5
6
5
Troubleshooting  
55 Troubleshooting  
55 – General  
56 – Network  
57 – Picture  
57 – Sound  
57 – Customer Support  
57 – Open source software notice  
6
Appendix  
58 Controlling a TV with the Supplied  
Remote Control  
58 – Setting up the remote to control your  
TV  
59 Network Software Update  
59 – Network update notification  
59 – Software Update  
61  
61  
About Nero MediaHome 4 Essentials  
– Installing Nero MediaHome 4  
Essentials  
62 – Sharing files and folders  
63 Area Code List  
64 Language code List  
65 Trademarks and Licenses  
67 Video Output Resolution  
68 Specifications  
70 Maintenance  
70 – Handling the Unit  
70 – Notes on Discs  
71  
Important Information Relating to  
Network Services  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Getting Started  
Introduction  
1
Playable Discs and symbols used in this manual  
Media/Term  
Logo  
Symbol  
Description  
Discs such as movies that can be purchased or  
rented.  
y
e
“Blu-ray 3D”discs and“Blu-ray 3D ONLY”discs.  
BD-R/RE discs that are recorded in BDAV format.  
y
y
Blu-Ray  
BD-R/RE discs that contain Movie, Music or  
Photo files.  
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
y
Discs such as movies that can be purchased or  
rented.  
y
r
Movie mode and finalized only  
Supports the dual layer disc also  
y
y
DVD-ROM  
DVD-R  
DVD-RW  
DVD+R  
Finalized AVCHD format  
o
DVD+RW  
(8 cm /  
12 cm)  
DVD R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
DVD-RW  
(VR)  
(8 cm /  
12 cm)  
VR mode and finalized only  
Audio CD  
r
Audio CD  
(8 cm /  
12 cm)  
t
CD-R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
CD-R/RW  
(8 cm /  
12 cm)  
ISO 9660+JOLIET, UDF and UDF Bridge format  
Indicates special notes and operating features.  
Note  
–
–
,
>
Indicates cautions for preventing possible  
damages from abuse.  
Caution  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
9
Note  
,
About the “ ” Symbol Display  
7
Depending on the conditions of the  
recording equipment or the CD-R/RW (or  
DVD R/RW) disc itself, some CD-R/RW (or  
DVD R/RW) discs cannot be played on the  
unit.  
y
“7”may appear on your TV display during  
operation and indicates that the function explained  
in this owner’s manual is not available on that  
specific media.  
1
Depending on the recording software & the  
finalization, some recorded discs (CD-R/RW,  
DVD R/RW, BD-R/RE) may not be playable.  
y
y
BD-R/RE, DVD R/RW and CD-R/RW discs  
recorded using a personal computer or a  
DVD or CD Recorder may not play if the  
disc is damaged or dirty, or if there is dirt or  
condensation on the player’s lens.  
If you record a disc using a personal  
computer, even if it is recorded in a  
compatible format, there are cases in which  
it may not play because of the settings of  
the application software used to create the  
disc. (Check with the software publisher for  
more detailed information.)  
y
This player requires discs and recordings to  
meet certain technical standards in order to  
achieve optimal playback quality.  
y
y
Pre-recorded DVDs are automatically set to  
these standards. There are many different  
types of recordable disc formats (including  
CD-R containing MP3 or WMA files) and  
these require certain pre-existing conditions  
to ensure compatible playback.  
Customers should note that permission  
is required in order to download MP3 /  
WMA files and music from the Internet.  
Our company has no right to grant such  
permission. Permission should always be  
sought from the copyright owner.  
y
y
You have to set the disc format option  
to [Mastered] in order to make the discs  
compatible with the LG players when  
formatting rewritable discs. When setting  
the option to Live System, you cannot use  
it on LG player. (Mastered/Live File System :  
Disc format system for windows Vista)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Getting Started  
File compatibility  
Movie files  
1
File  
Location  
File  
Extension  
Codec Format  
Audio Format  
Subtitle  
“.avi”, “.divx”,  
“.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx  
“.mkv”, “.mp4”,  
“.asf”, “.wmv”,  
“.m4v”(DRM  
free)  
DIVX3.xx, DIVX4.xx,  
Dolby Digital,  
DTS, MP3,  
WMA, AAC,  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), VobSub  
(.sub), SubViewer 1.0 (.sub),  
SubViewer 2.0 (.sub/.txt), TMPlayer  
(.txt), DVD Subtitle System (.txt)  
(Standard playback  
only), XVID, MPEG1 SS, AC3  
H.264/MPEG-4 AVC,  
MPEG2 PS, MPEG2 TS,  
VC-1 SM (WMV3)  
Disc,  
USB  
“.avi”, “.divx”,  
“.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx,  
“.mkv”, “.mp4”,  
“.asf”, “.wmv”,  
DIVX3.xx, DIVX4.xx,  
Dolby Digital,  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), SubViewer  
1.0 (.sub), SubViewer 2.0 (.sub/.  
txt), TMPlayer (.txt), DVD Subtitle  
System (.txt)  
DTS, MP3,  
WMA, AAC,  
AC3  
XVID, MPEG1 SS,  
DLNA, PC  
H.264/MPEG-4 AVC,  
MPEG2 PS, MPEG2 TS,  
VC-1 SM (WMV3)  
Music files  
File  
Location  
File  
Extension  
Sampling Frequency  
Bitrate  
Note  
Disc,  
USB,  
DLNA, PC  
“mp3”, “.wma”,  
“.wav”, “.m4a”  
(DRM free)  
within 32 - 48 kHz (WMA), within 20 - 320 kbps Some wav files are  
within 16 - 48 kHz (MP3) (WMA), within  
not supported on this  
32 - 320 kbps (MP3) player.  
Photo files  
File  
Location  
File  
Extension  
Recommanded  
Size  
Note  
Disc,  
USB,  
DLNA, PC  
“.jpg”, “.jpeg”,  
“.png”,  
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless  
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files  
are not supported.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started 11  
Note  
,
AVCHD (Advanced Video  
The file name is limited to 180 characters.  
y
y
Codec High Definition)  
Maximum files/folder: Less than 2 000  
(total number of files and folders)  
This player can playback AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
y
1
Depending on the size and number of the  
files, it may take several minutes to read the  
contents on the media.  
y
The AVCHD format is a high definition digital  
video camera format.  
y
y
File compatibility may differ depending on  
the server.  
y
y
The MPEG-4 AVC/H.264 format is capable of  
compressing images at higher efficiency than  
that of the conventional image compressing  
format.  
Because the compatibility on DLNA server  
are tested on the bundle DLNA server (Nero  
MediaHome 4 Essentials) environment, file  
requirements and playback functions may  
differ depending on media servers.  
This player can playback AVCHD discs using  
“x.v.Color”format.  
y
y
Some AVCHD format discs may not play  
depending on the recording condition.  
The file requirements on page 10 are not  
always compatible. There may have some  
restrictions by file features and media  
server’s ability.  
y
y
AVCHD format discs need to be finalized.  
y
y
“x.v.Color”offers a wider color range than normal  
DVD camcorder discs.  
Playing a movie subtitle files are only  
available on share folder of a PC or DLNA  
media server created by supplied Nero  
MediaHome 4 Essentials software on this  
player package.  
About DLNA  
This Player is a DLNA Certified digital media player  
that can display and play movie, photo and music  
content from your DLNA-compatible digital media  
server (PC and Consumer Electronics).  
The files from removable media such as USB  
drive, DVD-drive etc. on your media server  
may not be shared properly.  
y
The Digital Living Network Alliance (DLNA) is a  
cross-industry organization of consumer electronics,  
computing industry and mobile device companies.  
Digital Living provides consumers with easy sharing  
of digital media through your home network.  
This unit cannot support the ID3 Tag  
embedded MP3 file.  
y
y
The total playback time of audio file  
indicated on the screen may not correct for  
VBR files.  
The DLNA certification logo makes it easy  
to find products that comply with the DLNA  
Interoperability Guidelines. This unit complies with  
DLNA Interoperability Guidelines v1.5.  
HD movie files contained on the CD or USB  
1.0/1.1 may not played properly. BD, DVD or  
USB 2.0 are recommended to play back HD  
movie files.  
y
y
y
When a PC running DLNA server software or  
other DLNA compatible device is connected to  
this player, some setting changes of software or  
other devices may be required. Please refer to the  
operating instructions for the software or device for  
more information.  
This player supports H.264/MPEG-4 AVC  
profile Main, High at Level 4.1. For a file  
with higher level, the warning message will  
appear on the screen.  
This player does not support files that are  
2
recorded with GMC 1 or Qpel  
.
*
*
*1 GMC – Global Motion Compensation  
*2 Qpel – Quarter pixel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Getting Started  
Certain System Requirements  
Compatibility Notes  
For high definition video playback:  
Because BD-ROM is a new format, certain disc,  
digital connection and other compatibility issues  
are possible. If you experience compatibility  
problems, please contact an authorized  
Customer Service Center.  
y
High definition display that has COMPONENT or  
HDMI input jacks.  
y
1
BD-ROM disc with high definition content.  
y
y
HDMI or HDCP capable DVI input on your display  
device is required for some content (as specified  
by disc authors).  
This unit allows you to enjoy functions such  
as picture-in-picture, secondary audio and  
Virtual packages, etc., with BD-Video supporting  
BONUSVIEW (BD-ROM version 2 Profile 1 version  
1.1/ Final Standard Profile). Secondary video and  
audio can be played from a disc compatible with  
the picture-in-picture function. For the playback  
method, refer to the instructions in the disc.  
y
For playing files on your PC’s share folder via your  
home network, the PC requires below.  
Windows® XP (Service Pack 2 or higher),  
Windows Vista® (no Service Pack required)  
Windows 7® (no Service Pack required)  
y
Viewing high-definition content and up-  
converting standard DVD content may require a  
HDMI-capable input or HDCP-capable DVI input  
on your display device.  
y
1.2 GHz Intel® Pentium® III or AMD  
Sempron™ 2200+ processors  
y
Network environment: 100 Mb Ethernet  
y
y
More than 1 folder on your PC has to be shared.  
Visit suppot link of your operating system for  
more information on file share settings.  
Some BD-ROM and DVD discs may restrict the  
use of some operation commands or features.  
y
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are  
supported with maximum 5.1 channels if you  
use HDMI connection for the audio output of the  
unit.  
LG Remote  
You can control this player with your iPhone  
or Android phone via your home network. This  
player and your phone must be connected to your  
wireless network device such as access point.  
Visit“Apple iTunes”or“Google Apps Marketplace”for  
detailed information of“LG Remote”.  
You can use a USB device to store some disc  
related information, including downloaded on-  
line content. The disc you are using will control  
how long this information is retained.  
y
WOL (Wake On LAN)  
Users can turn on this player using WOL embeded  
utility on your personal computer or smartphone  
via your home network. To use this feature, this  
player must be connected to the WOL available  
access point or router with wired network  
connection. Refer to the relevant manual of  
the utility or network devices for more detailed  
information.  
Regional Code  
This unit has a regional code printed on the rear of  
the unit. This unit can play only BD-ROM or DVD  
discs labeled same as the rear of the unit or“ALL”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started 13  
Remote control  
• • • • • • a • • • • • •  
Direction buttons: Selects an  
option in the menu.  
1(POWER): Switches the player  
ON or OFF.  
1
PRESET +/-: Selects programme  
of Radio.  
B(OPEN/CLOSE): Opens and  
closes the disc tray.  
TUNING +/-: Tunes in the desired  
radio station.  
RADIO&INPUT: Changes input  
mode.  
ENTER (b): Acknowledges menu  
selection.  
0-9 numerical buttons: Selects  
numbered options in a menu or  
inputs letters in the keypad menu. resumes playback. The resume  
BACK (x): Exits the menu or  
play function may not work  
depending on the BD-ROM disc.  
CLEAR: Removes a mark on the  
search menu or a number when  
setting the password.  
TITLE/POP-UP: Displays the DVD  
title menu or BD-ROM’s pop-up  
menu, if available.  
REPEAT (h): Repeats a desired  
section or sequence.  
DISC MENU: Accesses menu on a  
disc.  
• • • • • • b • • • • •  
c/v(SCAN): Searches  
backward or forward.  
• • • • • • d • • • • •  
Colored (R, G, Y, B) buttons:  
- Use to navigate BD-ROM menus.  
They are also used for [MOVIE],  
[PHOTO], [MUSIC] and [Premium]  
menu.  
C/V(SKIP): Goes to the  
next or previous chapter / track /  
file.  
Z(STOP): Stops playback.  
z(PLAY): Starts playback.  
M(PAUSE): Pauses playback.  
- B button: Selects mono/ stereo  
in FM mode.  
MARKER: Marks any point during  
playback.  
SPEAKER LEVEL: Sets the sound  
level of desired speaker.  
SEARCH: Displays or exits the  
search menu.  
SOUND EFFECT: Selects a sound  
effect mode.  
Battery Installation  
SLEEP: Sets a certain period of  
time after which the unit will  
switch to off.  
VOL +/-: Adjusts speaker volume.  
OPTICAL: Changes input mode to  
optical directly.  
?(Optional): Marked button is  
not available.  
MUTE: Mute the unit.  
• • • • • • c • • • • •  
MIC/ECHO (Optional):  
Selects the microphone mode or  
microphone’s echo mode. After  
selecting the desired mode, press  
VOL +/- to adjust microphone  
volume or microphone’s echo  
volume.  
HOME (n): Displays or exits the  
Remove the battery cover on the  
rear of the Remote Control, and  
insert two R03 (size AAA) batteries  
with 4and 5matched correctly.  
[Home Menu].  
MUSIC ID: When connected  
to the network, can provide  
information about the current  
song while movie playback.  
X(REC): Records an audio CD.  
INFO/DISPLAY (m): Displays or  
exits On-Screen Display.  
TV Control Buttons: See page 58.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 Getting Started  
Front panel  
1
Caution  
a 1/!(POWER) Button  
b Disc Tray  
>
Precautions in using the touch buttons  
Use the touch buttons with clean and dry  
hands.  
- In a humid environment, wipe out any  
moisture on the touch buttons before  
using.  
y
c Remote Sensor  
d Display Window  
e Volume Control  
f MIC 1/2 (Optional)  
g PORT. IN  
Do not press the touch buttons hard to  
make it work.  
- If you apply too much strength, it can  
damage the sensor of the touch buttons.  
y
h USB Port  
i Operation buttons  
B(OPEN/CLOSE)  
Touch the button that you want to work in  
order to operate the function correctly.  
y
y
d/M(PLAY / PAUSE)  
Z(STOP)  
C/V(SKIP)  
F (Function)  
Be careful not to have any conductive  
material such as metallic object on the  
touch buttons. It can cause malfunctions.  
Changes the input source or function.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started 15  
Rear panel  
1
a AC power cord  
b Speakers connectors  
c Cooling Fan  
f HDMI OUT  
g VIDEO OUT  
h COMPONENT VIDEO (Y PB PR)  
OUTPUT (PROGRESSIVE SCAN)  
d LAN port  
i Antenna Connector  
e OPTICAL IN  
j AUX (L/R) INPUT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 Connecting  
2. Secure the connection with a supplied screw,  
then insert a speaker wire from the bottom of  
the base.  
Assembling the  
speaker (Front/Rear)  
Step 2  
Preparation  
Pole  
2
(Big screw)  
Base  
3. Attach the speaker to the pole, then secure the  
connection with a supplied screw.  
Screw  
Step 3  
Cable  
Speaker  
1. Attach the pole to the base, then secure the  
connection with a supplied screw.  
(Small screw)  
Step 1  
(Small screw)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 17  
Caution  
Be careful that the speaker  
does not fall down.  
Otherwise it may result in  
the speaker malfunctioning  
and causing personal injury  
and/ or property damage.  
4. Connect the speaker wire to the terminal on the  
speaker.  
>
Make sure the wire marked black goes in to the  
terminal marked“–”(minus) and the other wire  
goes in to the terminal marked“+”(plus).  
Step 4  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 Connecting  
Caution  
Be careful to make sure children not to put  
their hands or any objects into the *speaker  
duct.  
*Speaker duct: A hole for plentiful bass  
sound on speaker cabinet (enclosure).  
>
Positioning the system  
The following illustration shows an example of  
positioning the system. Note that the illustrations  
in these instructions differ from the actual unit for  
explanation purposes.  
For the best possible surround sound, all the  
speakers other than the subwoofer should be  
placed at the same distance from the listening  
y
y
y
Place the center speaker at a safe distance  
from the child’s reach.  
Otherwise it may result in the speaker falling  
down and causing personal injury and/or  
property damage.  
2
position ( ).  
A
The speakers contain magnetic parts, so  
colour irregularity may occur on the CRT  
TV screen or PC monitor screen. Please use  
the speakers away from the TV screen or PC  
monitor screen.  
B
C
G
A
F
A
A
A
E
A
A
D
Front left speaker (L)/  
Front right speaker (R):  
A
B
Place the front speakers to the sides of the monitor  
or screen and as flush with the screen surface as  
possible.  
Center speaker:  
C
Place the center speaker above or below the  
monitor or screen.  
Surround left speaker (L)/  
Surround right speaker (R):  
D
E
Place these speakers behind your listening position,  
facing slightly inwards.  
Subwoofer:  
F
The position of the subwoofer is not so critical,  
because low bass sounds are not highly directional.  
But it is better to place the subwoofer near the  
front speakers. Turn it slightly toward the center of  
the room to reduce the wall reflections.  
Unit  
G
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 19  
Speaker Connection  
Attaching the speakers to the  
player  
1. Connect speaker wires to the player.  
Each speaker wire is color-coded. Use matching  
color wires for corresponding speakers.  
2
Color  
Grey  
Speaker  
Rear  
Position  
Rear right  
Rear left  
Center  
Blue  
Rear  
Green  
Center  
Sub  
woofer  
Orange  
Any front position  
Red  
Front  
Front  
Front right  
Front left  
White  
2. Connect the speaker wire to the terminal on the  
speaker.  
Make sure the wire marked black goes in to the  
terminal marked“–”(minus) and the other wire  
goes in to the terminal marked“+”(plus).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 Connecting  
HDMI Connection  
Connecting to Your TV  
Make one of the following connections, depending  
on the capabilities of your existing equipment.  
If you have a HDMI TV or monitor, you can connect  
it to this player using a HDMI cable (Type A, High  
speed HDMI™ cable with Ethernet). Connect the  
HDMI jack on the player to the HDMI jack on a  
HDMI compatible TV or monitor.  
HDMI connection (page 20)  
y
y
y
Component Video connection (page 22)  
Video connection (page 22)  
Rear of the unit  
Note  
,
2
Depending on your TV and other  
equipment you wish to connect, there are  
various ways you could connect the player.  
Use only one of the connections described  
in this manual.  
y
Please refer to the manuals of your TV,  
stereo system or other devices as necessary  
to make the best connections.  
y
y
y
Make sure the player is connected directly  
to the TV. Tune the TV to the correct video  
input channel.  
HDMI  
cable  
TV  
Do not connect your player via your VCR.  
The image could be distorted by the copy  
protection system.  
Set the TV’s source to HDMI (refer to TV’s Owner’s  
manual).  
Additional Information for HDMI  
When you connect a HDMI or DVI compatible  
device make sure of the following:  
y
-
Try switching off the HDMI/DVI device and  
this player. Next, switch on the HDMI/DVI  
device and leave it for around 30 seconds,  
then switch on this player.  
-
-
The connected device’s video input is set  
correctly for this unit.  
The connected device is compatible with  
720x576p, 1280x720p, 1920x1080i or  
1920x1080p video input.  
Not all HDCP-compatible HDMI or DVI devices  
will work with this player.  
y
-
The picture will not be displayed properly  
with non-HDCP device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 21  
Note  
,
If a connected HDMI device does not accept  
the audio output of the player, the HDMI  
device’s audio sound may be distorted or  
may not output.  
y
When you use HDMI connection, you can  
change the resolution for the HDMI output.  
(Refer to“Resolution Setting”on page 23.)  
y
y
y
Select the type of video output from the  
HDMI OUT jack using [HDMI Color Setting]  
option on the [Setup] menu (see page 31).  
2
Changing the resolution when the  
connection has already been established  
may result in malfunctions. To solve the  
problem, turn off the player and then turn it  
on again.  
When the HDMI connection with HDCP  
is not verified, TV screen is changed to  
black screen. In this case, check the HDMI  
connection, or disconnect the HDMI cable.  
y
y
If there are noises or lines on the screen,  
please check the HDMI cable (length is  
generally limited to 4.5 m(15 ft.)).  
What is SIMPLINK?  
Some functions of this unit are controlled by the  
TV’s remote control when this unit and LG TV’s with  
SIMPLINK are connected through HDMI connection.  
Controllable functions by LG TV’s remote control;  
Play, Pause, Scan, Skip, Stop, Power Off, etc.  
Refer to the TV owner’s manual for the details of  
SIMPLINK function.  
LG TV’s with SIMPLINK function has the logo as  
shown above.  
Note  
,
Depending on the disc type or playing status,  
some SIMPLINK operation may differ from your  
purpose or not work.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 Connecting  
Component Video Connection  
Video Connection  
Connect the VIDEO OUT jack on the player to the  
video in jack on the TV using a video cable. You can  
hear the sound through the system’s speakers.  
Connect the COMPONENT VIDEO OUT jacks on the  
player to the corresponding input jacks on the TV  
using component video cable. You can hear the  
sound the through the system’s speaker.  
Rear of the unit  
Rear of the unit  
2
Video cable  
Component  
video cable  
TV  
TV  
Note  
,
When you use COMPONENT VIDEO OUT  
connection, you can change the resolution for  
the output. (Refer to“Resolution setting”on  
page 23.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 23  
Resolution Setting  
The player provides several output resolutions for  
HDMI OUT and COMPONENT VIDEO OUTPUT jacks.  
You can change the resolution using [Setup] menu.  
Antenna connection  
Connect the supplied antenna for listening to the  
radio.  
1. Press HOME (n).  
2. Use A/Dto select the [Setup] and press ENTER  
(b). The [Setup] menu appears.  
3. Use W/Sto select [DISPLAY] option then  
press Dto move to the second level.  
2
4. Use W/Sto select the [Resolution] option  
then press ENTER (b) to move to the third level.  
Rear of the unit  
5. Use W/Sto select the desired resolution then  
press ENTER (b) to confirm your selection.  
Note  
Note  
,
,
If your TV does not accept the resolution  
you have set on the player, you can set  
resolution to 576p as follows:  
y
y
After connecting the FM wire antenna, keep  
it as horizontal as possible. Be sure to fully  
extend the FM wire antenna.  
1. Press Bto open the disc tray.  
2
Press Z(STOP) for more than 5 seconds.  
Since several factors affect the resolution of  
video output, see“Video Output Resolution”  
on page 67.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 Connecting  
PORT. IN connection  
Connections with  
external device  
You can enjoy the sound from your portable audio  
player through the speakers of this system.  
Connect the headphones (or line out ) jack of the  
portable audio player into the PORT. IN socket of  
this unit. And then select the [PORTABLE] option by  
pressing RADIO&INPUT and ENTER (b).  
AUX Connection  
You can enjoy the sound from an external  
component through the speakers of this system.  
You can also use the F (Function) button on the  
front panel to select the input mode.  
Connect the analog audio output jacks of your  
component into the AUX L/R (INPUT) on this unit.  
And then select the [AUX] option by pressing  
RADIO&INPUT and ENTER (b).  
2
You can also use the F (Function) button on the  
front panel to select the input mode.  
Rear of the unit  
MP3 player, etc...  
White  
Red  
To the audio output jacks  
of your component  
(TV, VCR, etc.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 25  
OPTICAL IN connection  
You can enjoy the sound from your component  
with a digital optical connection through the  
speakers of this system.  
Connect the optical output jack of your  
component into the OPTICAL IN jack on the unit.  
And then select the [OPTICAL] option by pressing  
RADIO&INPUT and ENTER (b). Or press OPTICAL to  
select directly.  
2
You can also use the F (Function) button on the  
front panel to select the input mode.  
Rear of the unit  
To the digital  
optical output jack  
of your component  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 Connecting  
Connecting to your  
Home Network  
This player can be connected to a local area  
network (LAN) via the LAN port on the rear panel.  
By connecting the unit to a broadband home  
network, you have access to services such as  
software updates, BD-LIVE interactivity and on-line  
content services.  
Broadband  
service  
2
Wired network connection  
Router  
Using a wired network provides the best  
performance, because the attached devices  
connect directly to the network and are not subject  
to radio frequency interference.  
Please refer to the documentation for your network  
device for further instructions.  
Connect the player’s LAN port to the corresponding  
port on your Modem or Router using a  
PC and/or DLNA certified server  
commercially available LAN or Ethernet cable.  
Note  
,
When plugging or unplugging the LAN  
cable, hold the plug portion of the cable.  
When unplugging, do not pull on the LAN  
cable but unplug while pressing down on  
the lock.  
y
Do not connect a modular phone cable to  
the LAN port.  
y
y
Rear of the unit  
Since there are various connection  
configurations, please follow the  
specifications of your telecommunication  
carrier or internet service provider.  
If you want to access content from PCs  
or DLNA servers, this player must be  
connected to the same local area network  
with them via a router.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 27  
3. Select [OK] and press ENTER (b) to apply  
Wired Network Setup  
network settings.  
If there is a DHCP server on the local area network  
(LAN) via wired connection, this player will  
automatically be allocated an IP address. After  
making the physical connection, a small number of  
home networks may require the player’s network  
setting to be adjusted. Adjust the [NETWORK]  
setting as follow.  
4. The player will ask you to test the network  
connection. Select [OK] and press ENTER (b) to  
complete the network connection.  
5. If you select [Test] and press ENTER (b) at  
step 5 above, the network connection status is  
displayed on the screen.  
You can also test it on the [Connection Status]  
in the [Setup] menu.  
Preparation  
2
Before setting the wired network, you need to  
connect the broadband internet to your home  
network.  
1. Select [Connection Setting] option in the  
[Setup] menu then press ENTER (b).  
2. Use W/S/A/Dto select the IP mode  
between [Dynamic] and [Static].  
Normally, select [Dynamic] to allocate an IP  
address automatically.  
Note  
,
If there is no DHCP server on the network and  
you want to set the IP address manually, select  
[Static] then set [IP Address], [Subnet Mask],  
[Gateway] and [DNS Server] using W/S/  
A/Dand numerical buttons. If you make a  
mistake while entering a number, press CLEAR  
to clear the highlighted part.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 Connecting  
A DSL modem is required to use DSL service and  
a cable modem is required to use cable modem  
service. Depending on the access method of and  
subscriber agreement with your ISP, you may not  
be able to use the internet connection feature  
contained in this player or you may be limited  
to the number of devices you can connect at  
the same time. (If your ISP limits subscription to  
one device, this player may not be allowed to  
connect when a PC is already connected.)  
y
Notes on Network Connection:  
Many network connection problems during  
set up can often be fixed by re-setting the  
router or modem. After connecting the player  
to the home network, quickly power off and/  
or disconnect the power cable of the home  
network router or cable modem. Then power on  
and/or connect the power cable again.  
y
Depending on the internet service provider (ISP),  
the number of devices that can receive internet  
service may be limited by the applicable terms  
of service. For details, contact your ISP.  
y
y
2
The use of a“Router”may not be allowed or its  
usage may be limited depending on the policies  
and restrictions of your ISP. For details, contact  
your ISP directly.  
y
Our company is not responsible for any  
malfunction of the player and/or the internet  
connection feature due to communication  
errors/malfunctions associated with your  
broadband internet connection, or other  
connected equipment.  
The features of BD-ROM discs made available  
through the Internet Connection feature are not  
created or provided by our company, and our  
company is not responsible for their functionality  
or continued availability. Some disc related  
material available by the Internet Connection  
may not be compatible with this player. If you  
have questions about such content, please  
contact the producer of the disc.  
y
Some internet contents may require a higher  
bandwidth connection.  
y
y
Even if the player is properly connected and  
configured, some internet contents may not  
operate properly because of internet congestion,  
the quality or bandwidth of your internet service,  
or problems at the provider of the content.  
Some internet connection operations may not  
be possible due to certain restrictions set by the  
Internet service provider (ISP) supplying your  
broadband Internet connection.  
y
Any fees charged by an ISP including, without  
limitation, connection charges are your  
responsibility.  
y
y
A 10 Base-T or 100 Base-TX LAN port is required  
for wired connection to this player. If your  
internet service does not allow for such a  
connection, you will not be able to connect the  
player.  
You must use a Router to use xDSL service.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 29  
Note  
,
USB device connection  
This player supports USB flash drive/  
external HDD formatted in FAT16, FAT32 and  
NTFS when accessing files (music, photo,  
movie). However, for BD-LIVE and Audio CD  
recording, only FAT16 and FAT32 formats  
are supported. Use the USB flash drive/  
external HDD formatted in either FAT16 or  
FAT32 when using BD-LIVE and Audio CD  
recording.  
y
This player can play movie, music and photo files  
contained in the USB device.  
Playback content in the USB  
device  
1. Insert a USB device to the USB port until it fits  
into place.  
2
The USB device can be used for the local  
storage for enjoying BD-LIVE discs with  
Internet.  
y
This unit can support up to 8 partitions of  
the USB device.  
y
y
y
Do not extract the USB device during  
operation (play, etc.).  
A USB device which requires additional  
program installation when you have  
connected it to a computer, is not  
supported.  
When you connect the USB device on the HOME  
menu, the player plays a music file contained in the  
USB storage device automatically. If the USB storage  
device is containing various types of files, a menu  
for the file type selection will appear.  
USB device: USB device that supports  
USB1.1 and USB2.0.  
y
y
Movie, music and photo files can be played.  
For details of operations on each file, refer  
to relevant pages.  
File loading may takes few minutes depending on  
the number of content stored in the USB storage  
device. Press ENTER (b) while [Cancel] is selected  
to stop loading.  
Regular back up is recommended to  
prevent data loss.  
y
y
If you use a USB extension cable, USB HUB  
or USB Multi-reader, the USB device may not  
be recognized.  
2. Press HOME (n).  
3. Select [Movie], [Photo] or [Music] using A/D,  
and press ENTER (b).  
Some USB device may not work with this  
unit.  
y
y
y
4. Select the [USB] option using W/S, and press  
ENTER (b).  
Digital camera and mobile phone are not  
supported.  
USB Port of the unit cannot be connected  
to PC. The unit cannot be used as a storage  
device.  
5. Select a file using W/S/A/D, and press  
PLAY or ENTER (b) to play the file.  
6. Withdraw the USB device carefully.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 System Setting  
[DISPLAY] Menu  
Settings  
TV Aspect Ratio  
Select a TV aspect ratio option according to your TV  
type.  
Adjust the Setup Settings  
You can change the settings of the player in the  
[Setup] menu.  
[4:3 Letter Box]  
1. Press HOME (n).  
Select when a standard 4:3 TV is connected.  
Displays theatrical images with masking bars  
above and below the picture.  
[4:3 Pan Scan]  
Select when a standard 4:3 TV is connected.  
Displays pictures cropped to fill your TV screen.  
Both sides of the picture are cut off.  
3
2. Use A/Dto select the [Setup] and press  
[16:9 Original]  
ENTER (b). The [Setup] menu appears.  
Select when a 16:9 wide TV is connected. The  
4:3 picture is displayed with an original 4:3  
aspect ratio, with black bars appearing at the  
left and right sides.  
[16:9 Full]  
Select when a 16:9 wide TV is connected. The  
4:3 picture is adjusted horizontally (in a linear  
proportion) to fill the entire screen.  
3. Use W/Sto select the first setup option, and  
press Dto move to the second level.  
Note  
,
You cannot select [4:3 Letter Box] and  
[4:3 Pan Scan] option when the resolution is  
set to higher than 720p.  
4. Use W/Sto select a second setup option, and  
press ENTER (b) to move to the third level.  
5. Use W/Sto select a desired setting, and press  
ENTER (b) to confirm your selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 31  
Resolution  
HDMI Color Setting  
Sets the output resolution of the Component and  
HDMI video signal. Refer to page 23 and 67 for  
details about the resolution setting.  
Select the type of output from the HDMI OUT jack.  
For this setting, please refer to the manuals of your  
display device.  
[Auto]  
[YCbCr]  
If the HDMI OUT jack is connected to  
TVs providing display information (EDID),  
automatically selects the resolution best suited  
to the connected TV.  
Select when connecting to a HDMI display  
device.  
[RGB]  
Select when connecting to a DVI display  
device.  
[1080p]  
Outputs 1080 lines of progressive video.  
Wallpaper  
[1080i]  
Changes the background of the initial screen.  
Outputs 1080 lines of interlaced video.  
3
[720p]  
3D Mode  
Select the type of output mode for Blu-ray 3D disc  
playback.  
Outputs 720 lines of progressive video.  
[576p]  
Outputs 576 lines of progressive video.  
[Off]  
Blu-ray 3D disc playback will output as 2D  
mode like a normal BD-ROM disc playback.  
[576i]  
Outputs 576 lines of interlaced video.  
[On]  
1080p Display Mode  
Blu-ray 3D disc playback will output as 3D  
mode.  
When the resolution is set to 1080p, select  
[24 Hz] for smooth presentation of film material  
(1080p/24 Hz) with a HDMI-equipped display  
compatible with 1080p/24 Hz input.  
Home Menu Guide  
This function allows you to display or delete the  
guide bubble on the Home Menu. Set this option  
to [On] for displaying guide.  
Note  
,
When you select [24 Hz], you may  
experience some picture disturbance when  
the video switches video and film material.  
In this case, select [50 Hz].  
y
y
Even when [1080p Display Mode] is set to  
[24 Hz], if your TV is not compatible with  
1080p/24 Hz, the actual frame frequency of  
the video output will be 50 Hz to match the  
video source format.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 System Setting  
[LANGUAGE] Menu  
[AUDIO] Menu  
Display Menu  
Speaker Setup  
Select a language for the [Setup] menu and on-  
screen display.  
To obtain the best possible sound, use the speaker  
setup display to specify the volume of the speakers  
you have connected and their distance from your  
listening position. Use the test to adjust the volume  
of the speakers to the same level.  
Disc Menu/Disc Audio/  
Disc Subtitle  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
[Original]  
Refers to the original language in which the  
disc was recorded.  
3
[Other]  
Press ENTER (b) to select another language.  
Use number buttons then press ENTER (b)  
to enter the corresponding 4-digit number  
according to the language code list on page  
64.  
[Speaker]  
Select a speaker that you want to adjust.  
[Volume]  
Adjust the output level of each speaker.  
[Off] (Disc Subtitle only)  
Turn off Subtitle.  
[Distance]  
Adjust the distance between each speaker and  
the listening position.  
Note  
,
Depending on the disc, your language setting  
may not work.  
[Test/ Stop test tone]  
The speakers will emit a test tone.  
[OK]  
Confirms the setting.  
[Cancel]  
Cancels the setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 33  
HD AV Sync  
[LOCK] Menu  
Sometimes Digital TV encounters a delay between  
picture and sound. If this happens you can  
compensate by setting a delay on the sound so  
that it effectively‘waits’for the picture to arrive: this  
is called HD AV Sync. Use WSto scroll up and  
down through the delay amount, which you can  
set at anything between 0 and 300 ms.  
The [LOCK] settings affect only CinemaNow movie,  
BD and DVD playback.  
To access the any features in [LOCK] settings, you  
must enter the 4-digit security code you have  
created.  
If you have not entered a password yet, you are  
prompted to do so. Enter a 4-digit password twice,  
and press ENTER (b) to create a new password.  
Password  
You can create or change the password.  
[None]  
3
Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
DRC (Dynamic Range Control)  
[Change]  
Enter the current password and press ENTER  
(b). Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
This function allows you to listen to a movie at a  
lower volume without losing clarity of sound.  
[Off]  
If you forget your password  
Turns off this function.  
If you forget your password, you can clear it using  
the following steps:  
[On]  
Compress the dynamic range of the Dolby  
Digital, Dolby Digital Plus or Dolby TrueHD  
audio output.  
1. Remove any disc that might be in the player.  
2. Select [Password] option in the [Setup] menu.  
3. Use Number buttons to enter“210499”. The  
password is cleared.  
[Auto]  
The dynamic range of the Dolby TrueHD audio  
output is specified by itself.  
And the dynamic range of the Dolby Digital  
and Dolby Digital Plus are operated as same as  
the [On] mode.  
Note  
,
If you make a mistake before pressing ENTER  
(b), press CLEAR. Then input the correct  
password.  
Note  
,
The DRC setting can be changed only when a  
disc is not inserted or the unit is in complete  
stop mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 System Setting  
DVD Rating  
Blocks playback of rated DVD based on their  
content. (Not all discs are rated.)  
[NETWORK] Menu  
The [NETWORK] settings are needed to use the  
software update, BD Live and on-line content  
services.  
[Rating 1-8]  
Rating one (1) has the most restrictions and  
rating eight (8) is the least restrictive.  
Connection Setting  
If your home network environment is ready  
to connect the player, the player needs to be  
set the wired network connection for network  
communication. (See“Connecting to your Home  
Network”on pages 26-28.)  
[Unlock]  
If you select [Unlock], parental control is not  
active and the disc plays in full.  
BD Rating  
Set an age limit of BD-ROM play. Use number  
buttons to input an age limit for BD-ROM viewing.  
Connection Status  
If you want to check the network status on this  
player, select the [Connection Status] options and  
press ENTER (b) to check whether a connection  
to the network and the internet have been  
established.  
3
[255]  
All BD-ROM can be played.  
[0-254]  
Prohibits play of BD-ROM with corresponding  
ratings recorded on them.  
Note  
,
The [BD Rating] will be applied only for  
the BD disc that containing the Advanced  
Rating Control.  
y
y
For the region using MPAA rating level, refer  
to the table below as an example.  
BD Rating  
MPAA Rating  
0
8
G
PG  
13  
17  
18  
255  
PG-13  
R
NC-17  
Not restricted  
Area Code  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list  
on page 63.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 35  
BD-LIVE connection  
You can restrict Internet access when BD-LIVE  
functions are used.  
[OTHERS] Menu  
DivX VOD  
ABOUT DIVX VIDEO: DivX® is a digital video format  
created by DivX, Inc. This is an official DivX Certified®  
device that plays DivX video. Visit divx.com for more  
information and software tools to convert your files  
into DivX video.  
[Permitted]  
Internet access is permitted for all BD-LIVE  
contents.  
[Partially permitted]  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
Certified® device must be registered in order to play  
purchased DivX Video-on-Demand (VOD) movies.  
To obtain your registration code, locate the DivX  
VOD section in your device setup menu. Go to vod.  
divx.com for more information on how to complete  
your registration.  
Internet access is permitted only for BD-  
LIVE contents which have content owner  
certificates. Internet access and AACS Online  
functions are prohibited for all BD-LIVE  
contents without a certificate.  
[Prohibited]  
3
Internet access is prohibited for all BD-LIVE  
contents.  
[Register]  
Displays the registration code of your player.  
Premium  
[Deregister]  
Deactivate your player and display the  
deactivation code.  
[Country Setting]  
Select your area for displaying proper services  
and contents on the [Premium] feature.  
Note  
,
All the downloaded videos from DivX VOD  
with this player’s registration code can only be  
played back on this unit.  
Auto Power Off  
The screen saver appears when you leave the  
player in Stop mode for about five minutes. If  
you set this option to [On], the unit automatically  
turns off within 25 minutes since the Screen Saver  
is displayed. Set this option to [Off] to leave the  
screen saver until the unit is operated by the user.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 System Setting  
Initialize  
[Factory Set]  
You can reset the player to its original factory  
settings.  
[BD Storage Clear]  
Initializes the BD contents from the connected  
USB storage.  
Note  
,
If you reset the player to its original factory  
settings using [Factory Set] option, you have  
to set all the activation for the on-line services  
and network settings again.  
3
Software  
[Information]  
Displays the current software version.  
[Update]  
You can update the software by connecting  
the unit directly to the software update server  
(see page 59-60).  
Disclaimer Notice  
Press ENTER (b) to view the notice of Network  
Service Disclaimer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 37  
Setting the [User EQ]  
Sound Effect  
You can select a suitable sound mode. Press SOUND  
EFFECT repeatedly until the desired mode appears  
on the front panel display or the TV screen. The  
displayed items for the equalizer maybe different  
depending on sound sources and region.  
[Natural]: You can enjoy comfortable and natural  
sound.  
1. Use W/Sto select the desired frequency.  
[Local EQ]: Regionally optimized sound effect.  
(DANGDUT/ ARABIC/ PERSIAN/ INDIA/ REGUETON/  
MERENGUE/ SAMBA/ SALSA/ CUMBIA/ AFRO)  
2. Use A/Dto select the desired level.  
Select [Cancel] option then press ENTER (b) to  
cancel the setting.  
Select [Reset] option then press ENTER (b) to reset  
the all adjustments.  
[Bypass]: Software with multichannel surround  
audio signals is played according to the way it was  
recorded.  
3
[Bass Blast]: Reinforce the bass sound effect from  
front left and right speaker and subwoofer.  
[Natural Plus]: You can enjoy the natural sound  
effect same as 5.1 channel.  
[Clear Voice]: This mode makes voice sound clear,  
improving the quality of voice sound.  
[Virtual]: You can enjoy more dynamic sound with  
improved center channel.  
[Game]: You can enjoy more virtual sound while  
playing video games.  
[Night]: This may be useful when you want to  
watch movies at low volumes late at night.  
[Up Scaler]: When listening to MP3 files or other  
compressed music, you can enhance the sound.  
This mode is available only to 2 channel sources.  
[Loudness]: Improves bass and treble sound.  
[User EQ]: You can adjust the sound by raising or  
lowering the level of specific frequency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 Operating  
Playing a Disc  
General Playback  
Using [HOME] menu  
ert  
1. Press B(OPEN/CLOSE), and place a disc on the  
disc tray.  
The home menu appears when you press HOME  
(n). Use W/S/A/Dto select a category and  
press ENTER (b).  
2. Press B(OPEN/CLOSE) to close the disc tray.  
For the most Audio CD, BD-ROM and  
DVD-ROM discs, playback starts automatically.  
f
3. Press HOME (n).  
4. Select [Movie] or [Music] using A/D, and press  
ENTER (b).  
5. Select [BD], [DVD], [VR] or [Audio] option using  
W/S, and press ENTER (b).  
Note  
,
Playback functions described in this manual  
are not always available in every files and  
media. Some functions can be restricted  
depending on many factors.  
y
y
a
b
c
[Movie] - Plays video contents.  
[Photo] - Plays photo contents.  
[Music] - Plays audio contents.  
Depending on the BD-ROM titles, a USB  
device connection may be needed for the  
proper playback.  
4
[Premium] - Displays the Premium Home  
screen.  
d
Unfinalized DVD VR format discs may not be  
played in this player.  
y
y
e
f
[Input] - Changes input mode.  
Some DVD-VR discs are made with CPRM  
data by DVD RECORDER. This unit cannot  
support these kinds of discs.  
[Setup] - Adjusts the system settings.  
Playing a file on a disc/USB  
device  
yui  
This player can play movie, music and photo files  
contained in the disc or USB device.  
1. Insert a data disc on the tray or connect a USB  
device.  
2. Press HOME (n).  
3. Select [Movie], [Photo] or [Music] using A/D,  
and press ENTER (b).  
4. Select [Data] or [USB] option using W/S, and  
press ENTER (b).  
5. Select a file using W/S/A/D, and press  
d(PLAY) or ENTER (b) to play the file.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 39  
Playing Blu-ray 3D disc  
Enjoying BD-Live™  
e
e
This player can play the Blu-ray 3D discs which  
contains separate views for the left and right eyes.  
BD-Video supporting BD-Live (BD-ROM version 2  
Profile 2) that has a network extension function  
allows you to enjoy more functions such as  
downloading new movie trailers by connecting this  
unit to the internet.  
Preparation  
In order to playback Blu-ray 3D title in  
stereoscopic 3D mode, you need to:  
1. Check the network connection and settings  
(pages 26-28).  
Check your TV is 3D capable and has HDMI  
1.4 input(s).  
y
y
y
y
2. Insert a USB storage device to the USB port on  
the front panel.  
Wear 3D glasses to enjoy the 3D experience  
if it is necessary.  
A USB storage device is needed to download  
bonus content.  
Check whether the BD-ROM title is the Blu-  
ray 3D disc or not.  
3. Press HOME (n), and set the [BD-LIVE  
connection] option on the [Setup] menu (page  
35).  
Connect an HDMI cable (High Speed HDMI™  
Cable with Ethernet) between the player’s  
HDMI output and TV’s HDMI input.  
Depending on a disc, the BD-Live function may  
not be operated if [BD-LIVE connection] option  
is set to [Partially Permitted].  
4
1. Press HOME (n), and set the [3D Mode] option  
4. Insert a BD-ROM with BD-Live.  
on the [Setup] menu to [On] (page 31).  
The operations are differ depending on the disc.  
Refer to the manual supplied with the disc.  
2. Press B(OPEN/CLOSE), and place a disc on the  
disc tray.  
3. Press B(OPEN/CLOSE) to close the disc tray.  
Caution  
>
Do not extract the connected USB device  
while content is being downloaded or a Blu-  
ray disc is still in the disc tray. Doing so may  
damage the connected USB device and BD-  
Live features may not operate properly with  
the damaged USB device anymore. If the  
connected USB device seems damaged from  
such an action, you can format the connected  
USB device from the PC and reuse it with this  
player.  
The playback starts automatically.  
4. Refer to the owner’s manual of your 3D-ready  
TV for the further instruction.  
You may need to adjust the display settings and  
focus on your TV’s setting for the improved 3D  
effect.  
Caution  
Watching a 3D content for a long period  
time may cause dizziness or tiredness.  
>
y
y
It is not recommended to watch a movie  
in 3D mode for infirm, child and pregnant  
woman.  
Note  
,
Some BD-Live contents may be restrictively  
accessed in some territories by contents  
provider’s own decision.  
y
y
If you are experiencing headache, tiredness  
or dizziness while viewing contents in 3D,  
it is strongly recommended to stop the  
playback and rest until you feel normal.  
y
It may take up to several minutes to load  
and start enjoying BD-Live contents.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 Operating  
Entering a network user ID and the  
password  
Depending on your PC’s environment, you may  
need to enter a network user ID and the password  
for accessing a shared folder.  
Playing a file on a network  
server  
yui  
This player can play movie, music and photo files  
located in a PC or a DLNA server through your  
home network.  
1. The keyboard menu appears automatically if the  
network user ID and the password are required.  
1. Check the network connection and settings  
(pages 26-28).  
2. Use W/S/A/Dto select a character then  
press ENTER (b) to confirm your selection on  
the virtual keyboard.  
2. Press HOME (n).  
To enter a letter with an accent mark, press  
INFO/DISPLAY (m) to display the extended  
character set.  
3. Select [Movie], [Photo] or [Music] using A/D,  
and press ENTER (b).  
4. Select a DLNA media server or a share folder  
on your PC on the list using W/S, and press  
ENTER (b).  
4
[Cancel] – Returns to the previous screen.  
[Space] – Inserts a space at the cursor position.  
[<–] – Deletes the previous character at the  
cursor position.  
If you want to rescan available media server,  
press the green (G) colored button.  
[ABC / abc / #+-=&] – Change the keyboard  
menu settings to capital letters, small letters or  
symbols.  
5. Select a file using W/S/A/D, and press  
ENTER (b) to play the file.  
Note  
,
3. When you finish entering the network user ID  
and password, select [OK] using W/S/A/D  
and press ENTER (b) to access the folder.  
The file requirements are described on page  
10.  
y
y
The thumbnail of the unplayable files can  
be displayed, but those cannot be played  
on this player.  
The network user ID and password will be  
remembered after accssing the folder for your  
convenience. If you do not want the network user  
ID and password to be remembered, press red (R)  
colored button to un-tick the [Remember] check  
box before accessing the folder.  
The subtitle file name and movie file name  
have to be the same and located at the  
same folder.  
y
The playback and operating quality may be  
affected by your home network condition.  
y
y
You may experience connection problems  
depending on your server’s environment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 41  
Basic operations for video and  
audio content  
To stop playback  
Press Z(STOP) while playback.  
To pause playback  
Press M(PAUSE) while playback.  
Press d(PLAY) to resume playback.  
To play frame-by-frame (Video)  
Press M(PAUSE) while movie playback.  
Press M(PAUSE) repeatedly to play Frame-by-Frame  
playback.  
To scan forward or backward  
Press cor vto play fast forward or fast reverse  
during playback.  
You can change the various playback speeds by  
pressing cor vrepeatedly.  
4
To slow down the playing speed  
While the playback is paused, press vrepeatedly  
to play various speeds of slow motion.  
To skip to the next/previous  
chapter/track/file  
During playback, press Cor Vto go to the  
next chapter/track/file or to return to the beginning  
of the current chapter/track/file.  
Press Ctwice briefly to step back to the previous  
chapter/track/file.  
In the file list menu of a server, there may have  
many types of contents in a folder together. In this  
case, press Cor Vto go to the previous or  
next content with same type.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 Operating  
Basic operations for photo  
content  
Resume playback  
eroyt  
u
The unit records the point where you pressed the  
Z(STOP) depending on the disc.  
To play a slide show  
Press d(PLAY) to start slide show.  
If“MZ(Resume Stop)”appears on the screen briefly,  
press d(PLAY) to resume playback (from the scene  
point).  
To stop a slide show  
Press Z(STOP) while slide show.  
If you press Z(STOP) twice or unload the disc,  
“Z(Complete Stop)”appears on the screen. The unit  
will clear the stopped point.  
To pause a slide show  
Press M(PAUSE) while slide show.  
Press d(PLAY) to re-start the slide show.  
Note  
,
The resume point may be cleared when a  
button is pressed (for example; 1(POWER),  
B(OPEN/CLOSE), etc).  
y
To skip to the next/previous photo  
While viewing a photo in full screen, press Aor D  
to go to the previous or next photo.  
On BD-Video discs with BD-J, the resume  
playback function does not work.  
y
y
Using the disc menu  
ero  
If you press Z(STOP) once during BD-ROM  
interactive title playback, the unit will be in  
Complete Stop mode .  
4
To display the disc menu  
The menu screen may be displayed first after  
loading a disc which contains a menu. If you want  
to display the disc menu while playback, press DISC  
MENU.  
Use W/S/A/Dbuttons to navigate through  
menu items.  
To display the Pop-up menu  
Some BD-ROM discs contain Pop-up menu that  
appears while playback.  
Press TITLE/POPUP while playback, and use W/S/  
A/Dbuttons to navigate through menu items.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 43  
Repeating a specific portion  
erot  
This player can repeat a portion you have selected.  
Advanced Playback  
Repeat Playback  
1. While playback, press REPEAT (h) to select  
[A-] at the beginning of the portion you wish to  
repeat.  
erotu  
During playback, press REPEAT (h) repeatedly to  
2. Press ENTER (b) at the end of the portion. Your  
select a desired repeat mode.  
selected portion will be repeated continually.  
BDs/DVDs  
3. To return to normal playback, press REPEAT  
jA- – Selected portion will be repeated continually.  
(h) repeatedly to select [Off].  
jChapter – The current chapter will be played  
back repeatedly.  
Note  
,
You cannot select a portion less than 3  
seconds.  
y
y
jTitle – The current title will be played back  
repeatedly.  
This function may not work on some disc or  
title.  
To return to normal playback, press REPEAT (h)  
repeatedly to select [Off].  
Audio CDs/Music files  
;Track– The current track or file will be played  
back repeatedly.  
4
:All – All the tracks or files will be played back  
repeatedly.  
l – The tracks or files will be played back in  
random order.  
l:All – All the tracks or files will be played  
back repeatedly in random order.  
kA-B – Selected portion will be repeated  
continually. (Audio CD only)  
To return to normal playback, press CLEAR.  
Note  
,
If you press Vonce during Repeat  
Chapter/Track playback, the repeat playback  
cancels.  
y
y
This function may not work on some disc or  
title.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44 Operating  
Marker Search  
Using the search menu  
eroy  
You can start playback from up to nine memorized  
points.  
eroy  
Using search menu, you can easily to find the point  
where you want to start playback.  
To enter a marker  
To search a point  
1. While playback, press MARKER at the desired  
point. The Marker icon appears on the TV screen  
briefly.  
1. During playback, press SEARCH to display the  
search menu.  
2. Repeat step 1 to add up to nine markers.  
To recall a marked scene  
1. Press SEARCH and the search menu appears on  
the screen.  
2. Press A/Dto skip the playback 15 seconds  
forward or backward. You can select a point that  
you want to skip by pressing and holding  
A/Dbutton.  
2. Press a number button to select a marker  
number that you want to recall. Playback starts  
from the marked scene.  
To start playback from a marked  
scene  
1. Press SEARCH and the search menu appears on  
the screen.  
To delete a Marker  
1. Press SEARCH and the search menu appears on  
the screen.  
4
2. Press Sto highlight a marker number. Use  
A/Dto select a marked scene that you want  
to start playback.  
3. Press ENTER (b) to start playback from the  
marked scene.  
2. Press Sto highlight a marker number.  
Use A/Dto select a marked scene that you  
want to delete.  
Note  
,
This function may not work depending on  
discs, titles, server ability.  
y
y
3. Press CLEAR and the marked scene is erased  
from the search menu.  
This function may not work depending on  
the file type and ability of the media server.  
Note  
,
This function may not work depending on  
discs, titles, server ability.  
y
y
All marked points are cleared if the title  
is in complete stop (Z) mode, the title is  
changed or if you unload the disc.  
If the total length of the title is less than 10  
seconds, this function is not available.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 45  
Changing content list view  
Viewing content information  
yui  
On the [Movie], [Music] or [Photo] menu, you can  
change the content list view.  
y
The player can display the content information.  
1. Select a file using W/S/A/D.  
2. Press INFO/DISPLAY (m) to display the option  
Method 1  
Press red (R) colored button repeatedly.  
menu.  
3. Select the [Information] option using W/S,  
and press ENTER (b).  
The file information appears on the screen.  
While movie playback, you can display the file  
information by pressing TITLE/POPUP.  
Note  
,
The information displayed on the screen  
may not correct comparing actual content  
information.  
Selecting a subtitle file  
4
y
If the subtitle file name is different from the movie  
file name, you need to select the subtitle file on the  
[Movie] menu before playing the movie.  
1. Use W/S/A/Dto select the subtitle file you  
wish to play in the [Movie] menu.  
2. Press ENTER (b).  
Method 2  
Press ENTER (b) again to deselect the subtitle  
file. Selected subtitle file will be displayed when  
you play the movie file.  
1. On the content list, press INFO/DISPLAY (m) to  
display the option menu.  
Note  
2. Use W/Sto select the [View Change] option.  
,
If you press Z(STOP) while playback, the  
y
y
3. Press ENTER (b) to change the content list  
subtitle selection is cancelled.  
view.  
This function is not available for playing file  
on a server via home network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 Operating  
Last Scene Memory  
Options while viewing a photo  
er  
i
This unit memorizes the last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the unit or switch  
off the unit. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
You can use various options during viewing a  
photo in full screen.  
1. While viewing a photo in full screen, press INFO/  
DISPLAY (m) to display the option menu.  
2. Select an option using W/S.  
Note  
,
Last Scene Memory function for a previous  
disc is erased once a different disc is played.  
y
y
y
y
This function may not work depending on  
the disc.  
On BD-Video discs with BD-J, the last scene  
memory function does not work.  
This unit does not memorize settings of  
a disc if you switch off the unit before  
commencing to play it.  
a Current photo/Total number of photos  
4
– Use A/Dto view previous/next photo.  
Applying your photo to the  
b Slide Show – Press ENTER (b) to start or  
Wallpaper  
pause slide show.  
You can apply your photo to the wallpaper.  
c Music Select – Select the background  
1. Press HOME (n).  
music for the slide show (page 47).  
2. Select [Photo] using A/D, and press ENTER  
d Music –Press ENTER (b) to start or pause  
(b).  
background music.  
3. Select [Data] or [USB] option using W/S, and  
e Rotate – Press ENTER (b) to rotate the  
press ENTER (b).  
photo clockwise.  
4. Select a photo file, and press INFO/DISPLAY (m)  
f Zoom – Press ENTER (b) to display the  
to display the option menu.  
[Zoom] menu.  
5. Use W/Sto select [Wallpaper], and press  
g Effect – Use A/Dto select a transition  
ENTER (b) to apply.  
effect between photos in a slide show.  
The photo will be set as [Wallpaper 5] on the  
[Setup] menu.  
h Speed – Use A/Dto select a delaying  
speed between photos in a slide show.  
3. Press BACK (x) to exit the option menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 47  
Listening to music while slide  
show  
On-Screen display  
You can display and adjust various information and  
settings about the content.  
i
You can display photo files while listening to music  
files.  
Displaying content information  
on-screen  
1. While viewing a photo in full screen, press INFO/  
DISPLAY (m) to display the option menu.  
2. Use W/Sto select [Music Select] option, and  
press ENTER (b) to display the [Music Select]  
menu.  
eroy  
1. While playback, press INFO/DISPLAY (m) to  
show various playback information.  
3. Use W/Sto select a device, and press ENTER  
(b).  
Device that you can select are differ depending  
on the location of the photo file you are  
displaying in full screen.  
Photo location  
Disc, USB  
Available Device  
Disc, USB  
4
Share Folder (PC)  
DLNA server  
Share Folder (PC)  
DLNA server  
4. Use W/Sto select a file or a folder you wish to  
play.  
a Title – current title number/total number of  
titles  
b Chapter – current chapter number/total  
number of chapters  
c Time – elapsed playing time/total playback  
time  
Select gand press ENTER (b) to display the  
upper directory.  
d Audio – selected audio language or channel  
Note  
,
e Subtitle – selected subtitle.  
When selecting music file from a server, folder  
selection is not available. Only file selection is  
available.  
f Angle – selected angle/total number of  
angles  
g TV Aspect Ratio – selected TV aspect Ratio  
5. Use Dto select [OK], and press ENTER (b) to  
h Picture Mode – selected picture mode  
complete music selection.  
i Movie Information – Select this option and  
press ENTER (b) to display movie information  
from Gracenote Media Database (BD/DVD  
only).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48 Operating  
2. Select an option using W/S.  
Playing from selected time  
eroy  
3. Use A/Dto adjust the selected option value.  
4. Press BACK (x) to exit the On-Screen display.  
1. Press INFO/DISPLAY (m) during playback. The  
time search box shows the elapsed playing  
time.  
Note  
,
If no button is pressed for a few seconds,  
the on-screen display disappears.  
y
y
y
y
2. Select the [Time] option and then input the  
required start time in hours, minutes, and  
seconds from left to right.  
A title number cannot be selected on some  
discs.  
Available items may differ depending on  
discs or titles.  
For example, to find a scene at 2 hours, 10  
minutes, and 20 seconds, enter“21020”.  
If BD interactive title is playing back, some  
setting information is displayed on the  
screen but prohibited to be changed.  
Press A/Dto skip the playback 60 seconds  
forward or backward.  
3. Press ENTER (b) to start playback from selected  
To use the [Movie Information] option, the  
player must be connected to the broadband  
internet for accessing the Gracenote Media  
Database.  
y
y
time.  
Note  
,
This function may not work on some disc or  
titles.  
y
y
LG is a licensee of Gracenote technology  
and is not responsible or liable for  
information from the Gracenote Media  
Database.  
This function may not work depending on  
the file type and ability of the DLNA server.  
4
Hearing a different audio  
eroy  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use W/Sto select the [Audio] option.  
3. Use A/Dto select desired audio language,  
audio track or audio channel.  
Note  
,
Some discs allow you to change audio  
selections only via the disc menu. In this  
case, press TITLE/POP-UP or DISC MENU  
button and choose the appropriate audio  
from the selections on the disc menu.  
y
Immediately after you have switched sound,  
there may be a temporary discrepancy  
between the display and actual sound.  
y
y
On BD-ROM disc, the multi audio format  
(5.1CH or 7.1CH) is displayed with [MultiCH]  
in the on-screen display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 49  
Selecting a subtitle language  
Changing the TV Aspect Ratio  
eroy  
eroy  
You can change the TV aspect ratio setting while  
playback.  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use W/Sto select the [Subtitle] option.  
3. Use A/Dto select desired subtitle language.  
4. Press BACK (x) to exit the On-Screen display.  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use W/Sto select the [TV Aspect Ratio]  
option.  
Note  
,
3. Use A/Dto select desired option.  
Some discs allow you to change subtitle  
selections only via the disc menu. If this is the  
case, press TITLE/POPUP or DISC MENU button  
and choose the appropriate subtitle from the  
selections on the disc menu.  
4. Press BACK (x) to exit the On-Screen display.  
Note  
,
Even if you change the value of the [TV Aspect  
Ratio] option in On-Screen display, the [TV  
Aspect Ratio] option in the [Setup] menu is  
not changed.  
Watching from a different  
angle  
er  
If the disc contains scenes recorded at different  
camera angles, you can change to a different  
camera angle during playback.  
Changing subtitle code page  
y
If the subtitle is displayed in broken letter, you can  
change the subtitle code page to view the subtitle  
file properly.  
4
1. During playback, press INFO/DISPLAY (m) to  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
display the playback menu.  
2. Use W/Sto select the [Angle] option.  
3. Use A/Dto select desired angle.  
2. Use W/Sto select the [Code Page] option.  
3. Use A/Dto select desired code option.  
4. Press BACK (x) to exit the On-Screen display.  
4. Press BACK (x) to exit the On-Screen display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50 Operating  
Changing the Picture Mode  
eroy  
You can change the [Picture mode] option while  
playback.  
Audio CD Recording  
You can record one desired track or all of the tracks  
in Audio CD to a USB storage device.  
1. Insert a USB storage device to the USB port on  
the front panel.  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Press B(OPEN/CLOSE), and place an Audio CD  
2. Use W/Sto select the [Picture Mode] option.  
3. Use A/Dto select desired option.  
on the disc tray.  
Press B(OPEN/CLOSE) to close the disc tray.  
The playback starts automatically.  
4. Press BACK (x) to exit the On-Screen display.  
3. Press INFO/DISPLAY (m) to display the option  
Setting the [User] option  
menu.  
1. During playback, press INFO/DISPLAY (m) to  
Or  
display the On-Screen display.  
Press XREC button on the remote control.  
You can record all musics in the audio CD.  
2. Use W/Sto select the [Picture Mode] option.  
3. Use A/Dto select the [User setting] option,  
4. Use W/Sto select [CD Recording] option, and  
and press ENTER (b).  
press ENTER (b).  
5. Use W/Sto select a track you wish to copy on  
the menu, and press ENTER (b).  
4
Repeat this step to select tracks as many as you  
can.  
Selects all the tracks on an  
Audio CD.  
Selects an encoding option  
from the pop-up menu  
(128kbps, 192kbps, 320kbps or  
Lossless).  
4. Use W/S/A/Dto adjust the [Picture Mode]  
options.  
Cancels the recording and  
returns to the previous screen.  
Select [Default] option then press ENTER (b) to  
reset the all video adjustments.  
6. Use W/S/A/Dto select [Start], and press  
5. Use W/S/A/Dto select the [Close] option,  
ENTER (b).  
and press ENTER (b) to finish setting.  
7. Use W/S/A/Dto select a destination folder  
to be copied.  
If you want to create a new folder, use  
W/S/A/Dto select [New Folder] and press  
ENTER (b).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 51  
Enter a folder name using virtual keyboard, and  
press ENTER (b) while [OK] is selected.  
8. Use W/S/A/Dto select [OK], and press  
ENTER (b) to start Audio CD recording.  
If you want to stop in progressing Audio CD  
recording, press ENTER (b) while [Cancel] is  
highlighted.  
9. A message appears when Audio CD recording is  
completed. Press ENTER (b) to check the audio  
file created in the destination folder.  
Note  
,
The table below shows the average  
recording time from an music track with 4  
minutes of playback time to a audio file with  
192 kbps as an example.  
y
stop mode  
1.4 min.  
while playback  
2 min.  
Recording times in the table above are  
approximate.  
y
y
4
Actual recording time for USB storage  
device varies depending on the USB storage  
device’s ability.  
Make sure that there is minimum of 50 MB  
free space is needed when recording into  
the USB storage device.  
y
The length of the audio should be longer  
than 20 seconds for the proper recording.  
y
y
Do not turn off this player or extract the  
connected USB storage device during Audio  
CD recording.  
Caution  
>
The recording or copying features on  
this player are provided for your personel  
and noncommercial use. The making of  
unauthorized copies of copy-protected  
material, including computer programs, files,  
broadcasts and sound recordings, may be an  
infringement of copyrights and constitute a  
criminal offense. This equipment should not be  
used for such purposes. LG expressly disclaims  
any responsibility for illegal distribution or  
use of unauthorized content in commercial  
purpose.  
Be Responsible  
Respect Copyrights  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52 Operating  
Note  
,
Viewing information  
from Gracenote Media  
Database  
The player can access the Gracenote Media  
Database and loads the music information so that  
Track name, Artist Name, Genre and other text  
information can be displayed on the list.  
The player must be connected to the  
broadband internet for accessing the  
Gracenote Media Database.  
y
y
y
y
If the music information is not in the  
Gracenote Media Database, message  
appears on the screen.  
Depending on the cases, it will takes a few  
minutes to load music information from the  
Gracenote Media Database.  
Information may be displayed in broken  
letters, if the language you selected is not  
available on the Gracenote Media Database.  
Audio CD  
When you insert an Audio CD, the player starts  
playback automatically and load the music title  
from the Gracenote Media Database.  
This function is not available for on-line  
content and content in DLNA servers.  
y
y
If there is no music information from the database,  
music titles will not appear on the screen.  
LG is a licensee of Gracenote technology  
and is not responsible or liable for  
information from the Gracenote Media  
Database.  
Music file  
1. Select a music file or audio track using W/S/  
Audio CDs that users made for their only  
private purposes cannot be supported in  
this feature because they are not in the  
Gracenote Media Database.  
y
4
A/D.  
2. Press INFO/DISPLAY (m) to display the option  
menu.  
3. Select the [Information] option using W/S,  
and press ENTER (b).  
The player accesses to Gracenote Media  
Database for the music information.  
Blu-ray Disc/DVD/Movie file  
While listening to a music from the movie being  
played, press MUSIC ID to start loading the music  
information from the Gracenote Media Database.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 53  
Deleting a saved station  
Radio Operations  
Be sure that the antennas are connected.  
(Refer to the page 23)  
1. Press PRESET (- / +) to select a preset number  
you want to delete.  
2. Press CLEAR, the preset number will blink in the  
display window.  
3. Press CLEAR again, to delete the selected preset  
number.  
Listening to the radio  
1. Press RADIO&INPUT until TUNER (FM) appears in  
the display window. The last received station is  
tuned in.  
Deleting all the saved stations  
2. Press and hold TUNING (-/+) for about two  
seconds until the frequency indication starts to  
change. Scanning stops when the unit tunes in  
a station. Or Press TUNING (-/+) repeatedly.  
Press and hold CLEAR for two seconds.  
“ERASE ALL”will flash up. Press CLEAR again. Then all  
the saved stations are deleted.  
3. Adjust the volume by rotating VOLUME on  
the front panel or by pressing VOL (+/-) on the  
remote control.  
Improving poor FM reception  
Press B (blue) (MONO/STEREO) colored button on  
the remote control. This will change the tuner from  
stereo to mono and usually improve the reception.  
Presetting the Radio Stations  
4
You can preset 50 stations for FM.  
Before tuning, make sure that you have turned  
down the volume.  
1. Press RADIO&INPUT until the TUNER (FM)  
appears in the display window.  
2. Select the desired frequency by using TUNING  
(-/+).  
3. Press ENTER (b) a preset number will flash in  
the display window.  
4. Press PRESET (-/+) to select the preset number  
you want.  
5. Press ENTER (b). The station is stored.  
6. Repeat the steps 2 to 5 to store other stations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54 Operating  
Using the Premium  
You can use various content services via Internet  
with the Premium feature.  
1. Check the network connection and settings  
(pages 26-28).  
2. Press HOME (n).  
3. Select the [Premium] using A/D, and press  
ENTER (b).  
4. Select an on-line service using W/S/A/D,  
and press ENTER (b).  
Note  
,
4
Detailed information of each service,  
contact to the content provider or visit  
suppot link of the service.  
y
y
The content of Premium services and  
service related information, including user  
interface, is subject to changes. Please refer  
to the web site of each service for most up-  
to-date information.  
When you are first time to access [Premium]  
feature, current country setting appears. If  
you want to change the country setting,  
select [EDIT] and press ENTER (b).  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting 55  
Troubleshooting  
General  
Symptom  
Cause & Solution  
The Power does not turned on.  
Plug the power cord into the wall outlet securely.  
y
The unit does not start  
playback.  
Insert a playable disc. (Check the disc type, color system, and regional  
code.)  
y
Place the disc with the playback side down.  
Place the disc on the disc tray correctly inside the guide.  
Clean the disc.  
y
y
y
y
Cancel the Rating function or change the rating level.  
The angle cannot be changed.  
Multi-angles are not recorded on the DVD Video being played.  
y
Cannot play movie, photo or  
music files.  
The files are not recorded in a format that the unit can play.  
The unit does not support the codec of the movie file.  
y
y
The remote control does not  
work properly.  
The remote control is not pointed at the remote sensor of the unit.  
The remote control is too far from the unit.  
y
y
y
y
There is an obstacle in the path of the remote control and the unit.  
The batteries in the remote control are exhausted.  
5
The unit is plugged in, but the You can reset the unit as follows.  
power will not turn on or off.  
1. Press and hold the POWER button for at least five seconds. This will  
force the unit to power off then turn the unit back on.  
The unit is not operating  
normally.  
2. Unplug the power cord, wait at least five seconds, and then plug it in  
again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56 Troubleshooting  
Network  
Symptom  
Cause & Solution  
BD-LIVE feature does not work.  
The connected USB storage may not have enough space. Connect  
the USB storage with at least 1GB free space.  
y
y
y
Ensure that the unit is correctly connected to the local area network  
and can access the internet (see page 26-28).  
Your broadband speed may not fast enough to use the BD-LIVE  
features. Contact your Internet Service Provider (ISP) and increase the  
broadband speed is recommended.  
The [BD-LIVE connection] option in the [Setup] menu is set to  
[Prohibited]. Set the option to [Permitted].  
y
y
Streaming video services (such  
as YouTube™, etc.) are often  
stopped or“buffer”during  
playback.  
Your broadband service speed may not be fast enough to stream  
video services. Contact your Internet Service Provider (ISP) and  
increase the broadband speed is recommended.  
Shared folder or files from your  
PC or a media server are not  
displayed on the device list.  
The firewall or anti-virus software on your media server is running.  
Turn off the firewall or anti-virus software running on your PC or  
media server.  
y
y
The player is not connected to the local area network that your PC or  
the media server are connected.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting 57  
Picture  
Symptom  
Cause & Solution  
There is no picture.  
Select the appropriate video input mode on the TV so the picture  
from the unit appears on the TV screen.  
y
Connect the video connection securely.  
y
y
Check the [HDMI Color Setting] in the [Setup] menu is set to the  
appropriate item that conforms to your video connection.  
Your TV may not suppot the resolution you have set on the player.  
Change the resolution that your TV accepts.  
y
y
The player’s HDMI OUT jack is connected to a DVI device that does  
not support copyright protection.  
Picture noise appears  
You are playing a disc recorded in a colour system that is different  
from your TV.  
y
Set the resolution which your TV accepts.  
y
y
Blu-ray 3D disc playback does  
not output 3D views.  
Connect the player to your TV with HDMI cable (Type A, High Speed  
HDMI™ Cable with Ethernet).  
Your TV may not support“HDMI 1.4 3D mandatory format”.  
y
y
The [3D Mode] option in the [Setup] menu is set to [Off].  
Set the option to [On].  
Sound  
5
Symptom  
Cause & Solution  
There is no sound or the sound  
is distorted.  
The unit is in scan, slow motion, or pause mode.  
The sound volume is low.  
y
y
y
Check the speaker cable connection. (page 19)  
Customer Support  
You can update the Player using the latest software to enhance the products operation and/or add new  
features. To obtain the latest software for this player (if updates have been made), please visit  
http://lgservice.com or contact LG Electronics customer care centre.  
Open source software notice  
To obtain the corresponding source code under GPL, LGPL, MPL and other open source licenses, please  
visit http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are  
available to download with the source code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58 Appendix  
Setting up the remote to  
control your TV  
Controlling a TV with  
the Supplied Remote  
Control  
You can operate your TV with the supplied remote  
control.  
If your TV is listed in the table below, set the  
appropriate manufacturer code.  
You can control your TV using the buttons below.  
1. While holding down 1(TV POWER) button,  
and press the manufacturer code for your  
TV with the numerical buttons (see the table  
below).  
Manufacturer  
LG  
Code Number  
1(Default), 2  
Zenith  
1, 3, 4  
1, 2  
6, 7  
8, 9  
4
GoldStar  
Samsung  
Sony  
By pressing  
You can  
1(TV POWER)  
Turn the TV on or off.  
Switch the TV’s input source  
between the TV and other  
input sources.  
Hitachi  
AV/INPUT  
2. Release the 1(TV POWER) button to complete  
setting.  
Scan up or down through  
memorized channels.  
PR/CH W/S  
Depending on your TV, some or all buttons may not  
function on the TV, even after entering the correct  
manufacturer code. When you replace the batteries  
of the remote, the code number you have set may  
be reset to the default setting. Set the appropriate  
code number again.  
VOL +/–  
Adjust the volume of the TV  
Note  
,
Depending on the unit being connected, you  
may not be able to control your TV using some  
of the buttons.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 59  
Software Update  
Network Software  
Update  
You can update the player using the latest software  
to enhance the products operation and/or add  
new features. You can update the software by  
connecting the unit directly to the software update  
server.  
Network update notification  
Note  
,
From time to time, performance improvements  
and/or additional features or services may be  
made available to units that are connected to a  
broadband home network. If there is new software  
available and the unit is connected to a broadband  
home network, the player will inform you about the  
update as follows.  
Before updating the software in your player,  
remove any disc and USB Device from the  
player.  
y
Before updating the software in your player,  
turn the player off and then turn it back on.  
y
y
During the software update procedure,  
do not turn off the player or disconnect  
AC power, or do not press any button.  
Option 1:  
1. The update menu will appear on the screen  
when you turn on the player.  
If you cancel the update, turn off the power  
and turn it on for stable performance.  
y
y
2. Use A/Dto select a desired option and then  
This unit cannot be updated to previous  
software version.  
press ENTER (b).  
1. Check the network connection and settings  
(page 26-28).  
2. Select [Software] option in the [Setup] menu  
then press ENTER (b).  
3. Select [Update] option, and press ENTER (b).  
[OK]  
Starts the software update.  
6
[Cancel]  
Exits the update menu and  
displays it next booting.  
[Hide]  
Exits the update menu and  
it does not appear until next  
software is uploaded in the  
update server.  
The player will check for the newest update.  
Note  
,
Pressing ENTER (b) while checking for the  
y
y
update will end the process.  
Option 2:  
If there is no update available, the Message,  
“No update is found.”appears. Press ENTER  
(b) to return to the [Home Menu].  
If the software update is available from the update  
server, the“Update”icon appears in the Home  
menu. Press blue (B) colored button to start the  
update procedure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60 Appendix  
4. If newer version exists, the message“Do you  
want to update?”appears.  
5. Select [OK] to start update. (Selecting [Cancel]  
will end the update.)  
Caution  
>
Do not turn off the power during the software  
update.  
Note  
,
If the software includes the driver update, disc  
tray may open during the process.  
6. When update is completed, the message,  
“Update is complete.”will appear, and then  
power will turn off automatically after 5  
seconds.  
7. Turn the power back on. The system now  
operates with the new version.  
Note  
,
The Software Update function may not  
work properly depending on your internet  
environment. In this case, you can obtain  
the latest software from the authorized LG  
Electronics Service Center then update your  
player. Refer to“Customer Support”on page  
57.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 61  
Installing Nero MediaHome 4  
Essentials  
About Nero  
MediaHome 4  
Essentials  
Nero MediaHome 4 Essentials is a software for  
sharing movie, music and photo files stored on your  
computer to this player as a DLNA-compatiable  
digital media server.  
Before you install Nero MediaHome 4 Essentials,  
check the system requirement shown below.  
Windows® XP (Service Pack 2 or higher), Windows  
Vista® (no Service Pack required), Windows® XP  
Media Center Edition 2005 (Service Pack 2 or  
higher), Windows Server® 2003  
y
Windows Vista® 64-bit edition (application runs  
in 32-bit mode)  
y
y
Note  
,
Hard drive space: 200 MB hard drive space for a  
typical installation of Nero MediaHome stand-  
alone  
The Nero MediaHome 4 Essentials CD-  
ROM is designed for PCs and should not  
be inserted in this player or in any product  
other than a PC.  
y
y
y
y
1.2 GHz Intel® Pentium® III or AMD  
Sempron™ 2200+ processors  
y
The supplied Nero MediaHome 4 Essentials  
CD-ROM is a customized software edition  
only for sharing files and folders to this  
player.  
Memory: 256 MB RAM  
y
y
Graphics card with at least 32 MB video memory,  
minimum resolution of 800 x 600 pixels, and 16-  
bit color settings  
The supplied Nero MediaHome 4 Essentials  
software does not support following  
functions: Transcoding, Remote UI, TV  
control, Internet services and Apple iTunes  
Windows® Internet Explorer® 6.0 or higher  
DirectX® 9.0c revision 30 (August 2006) or higher  
Network environment: 100 Mb Ethernet  
y
y
y
This manual explains operations with  
the English version of Nero MediaHome  
4 Essentials as examples. Follow the  
explanation referring to the actual  
operations of your language version.  
Start up your computer, and insert the supplied CD-  
ROM disc into your computer’s CD-ROM drive. An  
installation wizard will walk you through the quick  
and uncomplicated installation process. To install  
Nero MediaHome 4 Essentials, proceed as follows:  
1. Close all Microsoft Windows programs and exit  
any anti-virus software that may be running.  
6
2. Insert the supplied CD-ROM disc into your  
computer’s CD-ROM drive.  
3. Click [Nero MediaHome 4 Essentials].  
4. Click [Run] to start installation.  
5. Click [Nero MediaHome 4 Essentials]. The  
installation is prepared and the installation  
wizard appears.  
6. Click the [Next] button to display the serial  
number input screen. Click [Next] to go to the  
next step.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62 Appendix  
7. If you accept all conditions, click [I accept  
the License Conditions] check box and click  
[Next]. Installation is not possible without this  
agreement.  
Sharing files and folders  
On your computer, you must share the folder  
contained movie, music and/or photo content to  
play them on this player.  
8. Click [Typical] and click [Next]. The installation  
process is started.  
This parts explains the procedure for selecting the  
shared folders on your computer.  
9. If you want to take part in the anonymous  
collection of data, select the check box and click  
the [Next] button.  
1. Double-click the“Nero MediaHome 4 Essentials”  
icon on the desktop.  
2. Click [Network] icon on the left and define your  
network name in the [Network name] field. The  
Network name you enter will be recognized by  
your player.  
10. Click the [Exit] button to complete the  
installation.  
3. Click [Shares] icon on the left.  
4. Click [Local Folders] tab on the [Shares] screen.  
5. Click [Add] icon to open the [Browse Folder]  
window.  
6. Select the folder containing the files you want  
to share. The selected folder is added to the list  
of shared folders.  
7. Click [Start Server] icon to start the server.  
Note  
,
If the shared folders or files are not displayed  
on the player, click the folder on the [Local  
Folders] tab and click [Rescan Folder] at the  
[More] button.  
y
y
Visit www.nero.com for more information  
and software tools  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 63  
Area Code List  
Choose an area code from this list.  
Area  
Code Area  
AF Fiji  
Code Area  
FJ Monaco  
Code Area  
Code  
Afghanistan  
Argentina  
Australia  
Austria  
MC Singapore  
SG  
AR Finland  
AU France  
AT Germany  
BE Great Britain  
BT Greece  
BO Greenland  
BR Hong Kong  
KH Hungary  
CA India  
FI Mongolia  
FR Morocco  
DE Nepal  
MN Slovak Republic  
MA Slovenia  
NP South Africa  
NL South Korea  
AN Spain  
SK  
SI  
ZA  
KR  
Belgium  
Bhutan  
GB Netherlands  
GR Antilles  
GL New Zealand  
HK Nigeria  
HU Norway  
IN Oman  
ES  
Bolivia  
NZ Sri Lanka  
NG Sweden  
NO Switzerland  
OM Taiwan  
LK  
Brazil  
SE  
Cambodia  
Canada  
Chile  
CH  
TW  
TH  
TR  
CL Indonesia  
CN Israel  
ID Pakistan  
IL Panama  
PK Thailand  
PA Turkey  
China  
Colombia  
Congo  
CO Italy  
IT Paraguay  
JM Philippines  
JP Poland  
PY Uganda  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
CG Jamaica  
CR Japan  
PH Ukraine  
Costa Rica  
Croatia  
PL United States  
PT Uruguay  
RO Uzbekistan  
Vietnam  
HR Kenya  
KE Portugal  
KW Romania  
LY Russian  
Czech Republic  
Denmark  
Ecuador  
Egypt  
CZ Kuwait  
DK Libya  
Federation  
RU  
EC Luxembourg  
EG Malaysia  
SV Maldives  
ET Mexico  
LU  
Zimbabwe  
Saudi Arabia  
MY  
SA  
SN  
Senegal  
6
El Salvador  
Ethiopia  
MV  
MX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64 Appendix  
Language code List  
Use this list to input your desired language for the following initial settings: [Disc Audio],  
[Disc Subtitle] and [Disc Menu].  
Language  
Afar  
Code Language  
6565 French  
6570 Frisian  
Code Language  
7082 Lithuanian  
7089 Macedonian  
7176 Malagasy  
7565 Malay  
Code Language  
7684 Sindhi  
7775 Singhalese  
7771 Slovak  
7783 Slovenian  
7776 Spanish  
7773 Sudanese  
7782 Swahili  
7779 Swedish  
7778 Tagalog  
7865 Tajik  
Code  
8368  
8373  
8375  
8376  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8469  
8472  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Afrikaans  
Albanian  
Ameharic  
Arabic  
8381 Galician  
6577 Georgian  
6582 German  
7289 Greek  
6869 Malayalam  
6976 Maori  
Armenian  
Assamese  
Aymara  
6583 Greenlandic  
6588 Guarani  
6590 Gujarati  
6665 Hausa  
7576 Marathi  
7178 Moldavian  
7185 Mongolian  
7265 Nauru  
Azerbaijani  
Bashkir  
Basque  
6985 Hebrew  
6678 Hindi  
7387 Nepali  
7869 Tamil  
Bengali; Bangla  
Bhutani  
Bihari  
7273 Norwegian  
7285 Oriya  
7879 Telugu  
7982 Thai  
6890 Hungarian  
6672 Icelandic  
6682 Indonesian  
6671 Interlingua  
7789 Irish  
7383 Panjabi  
8065 Tonga  
8083 Turkish  
7065 Turkmen  
8076 Twi  
Breton  
7378 Pashto, Pushto  
7365 Persian  
Bulgarian  
Burmese  
Byelorussian  
Chinese  
Croatian  
Czech  
7165 Polish  
6669 Italian  
7384 Portuguese  
7465 Quechua  
8084 Ukrainian  
8185 Urdu  
9072 Japanese  
7282 Kannada  
6783 Kashmiri  
6865 Kazakh  
7876 Kirghiz  
7578 Rhaeto-Romance 8277 Uzbek  
6
7583 Rumanian  
7575 Russian  
7589 Samoan  
7579 Sanskrit  
7585 Scots Gaelic  
7679 Serbian  
7665 Serbo-Croatian  
7686 Shona  
8279 Vietnamese  
Danish  
8285 Volapük  
8377 Welsh  
8365 Wolof  
7168 Xhosa  
8382 Yiddish  
8372 Yoruba  
8378 Zulu  
Dutch  
Korean  
English  
6978  
6979  
6984  
7079  
7074  
7073  
Kurdish  
Esperanto  
Estonian  
Faroese  
Fiji  
Laothian  
Latin  
Latvian, Lettish  
Lingala  
7678  
Finnish  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 65  
Trademarks and  
Licenses  
Manufactured under license under U.S. Patent  
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;  
6,226,616; 6,487,535; 7,392,195; 7,272,567;  
7,333,929; 7,212,872 & other U.S. and worldwide  
patents issued & pending. DTS and the Symbol  
are registered trademarks,& DTS-HD, DTS-HD  
Master Audio | Essential and the DTS logos  
are trademarks of DTS, Inc. Product includes  
software. © DTS, Inc. All Rights Reserved.  
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,  
BONUSVIEW™ and the logos are trademarks of  
the Blu-ray Disc Association.  
“DVD Logo”is a trademark of DVD Format/Logo  
Licensing Corporation.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are  
trademarks, service marks, or certification marks  
of the Digital Living Network Alliance.  
“x.v.Color”is a trademark of Sony Corporation.  
Java and all Java-based trademarks and logos  
are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and other  
countries.  
“AVCHD”and the“AVCHD”logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI licensing LLC.  
6
DivX®, DivX Certified® and associated logos  
are trademark of DivX, Inc., and are used under  
license.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66 Appendix  
You agree that your non-exclusive license to use  
the Gracenote Data, the Gracenote Software, and  
Gracenote Servers will terminate if you violate  
these restrictions. If your license terminates, you  
agree to cease any and all use of the Gracenote  
Data, the Gracenote Software, and Gracenote  
Servers. Gracenote reserves all rights in Gracenote  
Data, the Gracenote Software, and the Gracenote  
Servers, including all ownership rights. Under  
no circumstances will Gracenote become liable  
for any payment to you for any information that  
you provide. You agree that Gracenote, Inc. may  
enforce its rights under this Agreement against you  
directly in its own name.  
Gracenote®, Gracenote logo and logotype,  
and the“Powered by Gracenote”logo are  
either registered trademarks or trademarks of  
Gracenote, Inc. in the United States and/or other  
countries.  
Music recognition technology and related data  
are provided by Gracenote®.  
Portions of the content is copyright © Gracenote  
or its providers.  
The Gracenote service uses a unique identifier to  
track queries for statistical purposes. The purpose  
of a randomly assigned numeric identifier is to  
allow the Gracenote service to count queries  
without knowing anything about who you are.  
For more information, see the web page for the  
Gracenote Privacy Policy for the Gracenote service.  
Gracenote® End User License Agreement  
This application or device contains software from  
Gracenote, Inc. of Emeryville, California  
(“Gracenote”). The software from Gracenote (the  
“Gracenote Software”) enables this application to  
perform disc and/or file identification and obtain  
music-related information, including name, artist,  
track, and title information (“Gracenote Data”) from  
online servers or embedded databases (collectively,  
“Gracenote Servers”) and to perform other  
functions. You may use Gracenote Data only by  
means of the intended End-User functions of this  
application or device.  
The Gracenote Software and each item of  
Gracenote Data are licensed to you“AS IS.”  
Gracenote makes no representations or warranties,  
express or implied, regarding the accuracy of any  
Gracenote Data from in the Gracenote Servers.  
Gracenote reserves the right to delete data from  
the Gracenote Servers or to change data categories  
for any cause that Gracenote deems sufficient. No  
warranty is made that the Gracenote Software or  
Gracenote Servers are error-free or that functioning  
of Gracenote Software or Gracenote Servers will  
be uninterrupted. Gracenote is not obligated to  
provide you with new enhanced or additional data  
types or categories that Gracenote may provide in  
the future and is free to discontinue its services at  
any time.  
You agree that you will use Gracenote Data, the  
Gracenote Software, and Gracenote Servers for  
your own personal non-commercial use only. You  
agree not to assign, copy, transfer or transmit the  
Gracenote Software or any Gracenote Data to any  
third party. YOU AGREE NOT TO USE OR EXPLOIT  
GRACENOTE DATA, THE GRACENOTE SOFTWARE,  
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY  
PERMITTED HEREIN.  
6
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS  
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
IMPLIED WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND  
NON-INFRINGEMENT. GRACENOTE DOES NOT  
WARRANT THE RESULTS THAT WILL BE OBTAINED  
BY YOUR USE OF THE GRACENOTE SOFTWARE  
OR ANY GRACENOTE SERVER. IN NO CASE WILL  
GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL  
OR INCIDENTAL DAMAGES OR FOR ANY LOST  
PROFITS OR LOST REVENUES.  
© Gracenote, Inc. 2009  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 67  
Video Output Resolution  
When the non-copy protected media is playing back  
Video Out  
COMPONENT VIDEO OUT  
HDMI connected HDMI disconnected  
HDMI OUT  
Resolution  
576i  
576p  
576p  
576p  
576i  
576p  
720p  
1080i  
720p  
720p  
1080i  
1080i  
1080p/24 Hz  
1080p / 50 Hz  
1080p / 24 Hz  
1080p / 50 Hz  
576i  
576i  
1080i  
1080i  
When the copy protected media is playing back  
Video Out  
HDMI OUT  
COMPONENT VIDEO OUT  
Resolution  
576i  
576p  
576p  
576p  
576i  
576i  
576i  
576i  
576i  
576i  
720p  
720p  
1080i  
1080i  
1080p/24 Hz  
1080p / 50 Hz  
1080p / 24 Hz  
1080p / 50 Hz  
HDMI OUT connection  
COMPONENT VIDEO OUT  
Connection  
Blu-ray Disc, DVD video stream could prevent up-  
scaling on analog output.  
6
If you select a resolution manually and then  
connect the HDMI jack to TV and your TV does  
not accept it, the resolution setting is set to  
[Auto].  
y
If you select a resolution that your TV does not  
accept, the warning message will appear. After  
resolution change, if you cannot see the screen,  
please wait 20 seconds and the resolution  
will automatically revert back to the previous  
resolution.  
VIDEO OUT connection  
The resolution of the VIDEO OUT jack is always  
outputted at 576i resolution.  
y
The 1080p video output frame rate may  
be automatically set to either 24 Hz or 50  
Hz depending both on the capability and  
preference of the connected TV and based on  
the native video frame rate of the content on the  
BD-ROM disc.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
68 Appendix  
Specifications  
General  
Power requirements  
Power consumption  
Dimensions (W x H x D)  
Net Weight (Approx.)  
Operating temperature  
Operating humidity  
Refer to main label on the rear panel.  
Refer to main label on the rear panel.  
Approx. 433.5 x 57 x 281 mm (17 x 2.2 x 11 inches)  
3.5 kg (7.7 lbs)  
5 °C to 35 °C (41 °F to 95 °F)  
5 % to 90 %  
Inputs/Outputs  
VIDEO OUT  
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1  
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2  
19 pin (Type A, HDMI™ Connector)  
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1  
3 V (p-p), Optical jack x 1  
COMPONENT VIDEO OUT  
HDMI OUT (video/audio)  
ANALOG AUDIO IN  
DIGITAL IN (OPTICAL)  
PORT. IN  
0.5 Vrms (3.5 mm stereo jack)  
MIC IN  
6.3 mm jack  
Tuner  
FM Tuning Range  
87.5 to 108.0 MHz or 87.50 to 108.00 MHz  
Amplifier  
6
Power output (4 Ω/ 3 Ω), (RMS), THD 10 %  
Total  
1100 W  
Front  
180 W x 2  
180 W  
Center  
Rear  
180 W x 2  
200 W (Passive)  
Sub-Woofer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 69  
System  
Laser  
Semiconductor laser  
Wavelength  
405 nm / 650 nm  
Signal system  
Frequency response  
Harmonic distortion  
Dynamic range  
LAN port  
Standard PAL/NTSC color TV system  
20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling)  
Less than 0.05 %  
More than 80 dB  
Ethernet jack x 1, 10BASE-T / 100BASE-TX  
DC 5 V 0500 mA  
Bus Power Supply (USB)  
Speakers  
Front speaker (Left/ Right)  
Type  
2 Way 3 speaker  
Max. Input power 360 W  
Net Dimensions  
(W x H x D)  
280 x 1152 x 225 mm  
(11 x 45 x 8.9 inches)  
3.33 kg (7.34 lbs)  
Impedance Rated 4 Ω  
Input Power  
180 W  
Net Weight  
Rear speaker (Left/ Right)  
Type  
2 Way 3 speaker  
Max. Input power 360 W  
Net Dimensions  
(W x H x D)  
280 x 1152 x 225 mm  
(11 x 45 x 8.9 inches)  
Impedance Rated 4 Ω  
Input Power  
Center speaker  
Type  
180 W  
2 Way 3 speaker  
Net Weight  
3.33 kg (7.34 lbs)  
Max. Input power 360 W  
Net Dimensions  
(W x H x D)  
327 x 99 x 76 mm  
(12.9 x 3.9 x 3.0 inches)  
Impedance Rated 4 Ω  
6
Input Power  
Subwoofer  
Type  
180 W  
1 Way 1 speaker  
Net Weight  
1.21 kg (2.67 lbs)  
Max. Input power 400 W  
Net Dimensions  
(W x H x D)  
190 x 385 x 358 mm  
(7.5 x 15.2 x 14.1 inches)  
Impedance Rated 3 Ω  
Input Power 200 W  
Net Weight  
5.4 kg (11.9 lbs)  
Design and specifications are subject to change without notice.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
70 Appendix  
Notes on Discs  
Maintenance  
Handling Discs  
Do not touch the playback side of the disc. Hold  
the disc by the edges so that fingerprints do not  
get on the surface. Never stick paper or tape on the  
disc.  
Handling the Unit  
When shipping the unit  
Please save the original shipping carton and  
packing materials. If you need to ship the unit, for  
maximum protection, re-pack the unit as it was  
originally packed at the factory.  
Storing Discs  
After playing, store the disc in its case. Do not  
expose the disc to direct sunlight or sources of heat  
and never leave it in a parked car exposed to direct  
sunlight.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide  
spray near the unit.  
y
y
y
Cleaning Discs  
Wiping with strong pressure may damage the  
surface.  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center to out.  
Do not leave rubber or plastic products in  
contact with the unit for a long period of time.  
Cleaning the unit  
Do not use strong solvents such as alcohol,  
benzine, thinner, commercially available cleaners,  
or anti-static spray intended for older vinyl records.  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution. Do not  
use strong solvents such as alcohol, benzine, or  
thinner, as these might damage the surface of the  
unit.  
Maintaining the Unit  
The unit is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty  
or worn, the picture quality could be diminished.  
For details, please contact your nearest authorized  
service center.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 71  
Important Information  
Relating to Network  
Services  
All information, data, documents, communications,  
downloads, files, text, images, photographs,  
graphics, videos, webcasts, publications, tools,  
resources, software, code, programs, applets,  
widgets, applications, products and other content  
(“Content”) and all services and offerings (“Services”)  
provided or made available by or through any  
third party (each a“Service Provider”) is the sole  
responsibility of the Service Provider from whom it  
originated.  
The availability of and access to Content and  
Services furnished by the Service Provider through  
the LGE Device are subject to change at any time,  
without prior notice, including, but not limited to  
the suspension, removal or cessation of all or any  
part of the Content or Services.  
Should you have any inquiry or problem related  
to the Content or Services, you may refer to the  
Service Provider’s website for the most up-to-  
date information. LGE is neither responsible nor  
liable for customer service related to the Content  
and Services. Any question or request for service  
relating to the Content or Services should be made  
directly to the respective Content and Service  
Providers.  
6
Please note that LGE is not responsible for any  
Content or Services provided by the Service  
Provider or any changes to, removal of, or cessation  
of such Content or Services and does not warrant  
or guaranty the availability of or access to such  
Content or Services.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KVH Industries IP Phone V7 User Manual
KVH Industries Satellite TV System antenna system User Manual
Land Pride Tiller 311 431P User Manual
Lasko Fan 2744 User Manual
Lexmark Printer 1361760 User Manual
Liebert Power Supply GXT2 3X1 User Manual
LST Smoke Alarm 2100RFT AS User Manual
Marshall Amplification Stereo Amplifier TSL60 User Manual
Maytag Clothes Dryer W10151609A User Manual
Melissa Mixer 646 036 User Manual