OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
42WS10
47WS10
55WS10
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
3
56 TROUBLESHOOTING
59 SPECIFICATIONS
67 IR CODES
68 CONTROLLING THE MULTIPLE
PRODUCT
68
68
68
69
71
Connecting the cable
RS-232C Configurations
Communication Parameter
Command reference list
Transmission / Receiving protocol
Download from Www.Somanuals.com. All Manuals Search And Download.
4
LICENSES
LICENSES
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
5
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
MONITOR
ON
OFF
ENERGY INPUT
SAVING
ꢀ
ꢃ
.
,
!
ꢁ
ABC
JKL
TUV
ꢂ
ꢅ
ꢈ
DEF
GHI
ꢄ
ꢇ
ꢉ
MNO
WXYZ
ꢆ
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
S.MENU
MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
Remote control and Batteries
Power Cord
CD (Owner's Manual)
/ Card
D-sub 15 pin signal cable
Mounting Cable Tie
(Provided for 42WS10 and
47WS10 models only)
CAUTION
Do not use any pirated items to ensure the safety and product life span.
Any damages or injuries by using pirated items are not covered by the warranty.
y
y
NOTE
The accessories supplied with your product may vary depending on the model.
Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ASSEMBLING AND PREPARING
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
ST-200T
Stand
SP-2000
Speaker
Cable holder
/Cable Tie
Screws
Screws
: Diameter 4.0 mm x Pitch 0.7 mm x
Length 10mm(Included Spring Washer)
Diameter 4.0 mm x Pitch 0.7 mm x
Length 8 mm(Included Spring Washer)
Stand kit
Speaker kit
NOTE
Cable holder/Cable tie may not be available in some areas or for some models.
Optional accessories are not included for all models.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
7
Parts and buttons
Screen Buttons
Screen Marks
IR Receiver /
Power Indicator
Lighting On: Turned on
Lighting Off: Turned off
y
y
Connection panel
Screen Marks
Description
INPUT
MENU
Changes the input source.
Accesses the main menus, or saves your input and exits the menus.
Adjust the up and down.
Adjusts the volume level.
AUTO/SET
Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
Turns the power on or off.
/ I
IR Receiver
Power Indicator
This is where the unit receives signals from the remote control.
This Indicator lights up blue when the display operates normally(on mode). If the display
In sleep mode (In Power Saving mode), this indicator color changes to amber.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ASSEMBLING AND PREPARING
Using the Mounting Cable
Tie
Connecting the Speakers
- Only on some models.
- Applicable only to 42WS10 and 47WS10 models.
Connect an input signal cable to use before
installing the speakers.
1
First, connect the input signal cable to be used.
Insert the cable tie into the bottom hole on the
back as shown in the figure to organize cables.
Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.
2
NOTE
The Mounting cable tie is provided for
42WS10 and 47WS10 models only.
y
After installing your speakers, use holders and
cable ties to organize the speaker cables.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
9
Connecting the stand
Using the Kensington
security system
- Only on some models.
The Kensington security system connector is
located at the back of the Monitor. For more
information of installation and using, refer to the
manual supplied with the Kensington security
Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the stand as shown in the following
picture.
1
Connect the Kensington security system cable
between the Monitor and a table.
Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
2
NOTE
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
10 ASSEMBLING AND PREPARING
Portrait Layout
- Only on some models.
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING 11
Mounting on a wall
CAUTION
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
Disconnect the power before installing or
moving the monitor. Otherwise electric shock
may occur.
y
y
If you install the Monitor on a ceiling or
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
cause damage to the Monitor and void your
warranty.
y
y
10 cm
Use screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are
not covered by the warranty.
10 cm
10 cm
10 cm
10 cm
NOTE
If you intend to mount the Monitor to a wall, attach
Wall mounting interface (optional parts) to the back
of the set.
When you install the Monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not fall.
Use screws that are listed on the VESA
standard screw specifications.
y
y
y
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
Please, Use the screw and wall mount interface
in accordance with VESA Standards.
1
2
3
If you use screw longer than standard, the
monitor might be damaged internally.
The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
y
y
If you use improper screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
For more information, refer to the instructions
supplied with the wall mount.
VESA compatible.
4
5
Please use VESA standard as below.
785mm(31 inch) or greater
y
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
12 REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
may damage the remote control.
Make sure to point the remote control at the
remote control sensor on the Monitor.
y
y
ENERGY SAVING
/ I (POWER)
Turns the Monitor on or off.
Adjusts the brightness of
the screen to reduce energy
consumption.
POWER
MONITOR ON / OFF
Turn off the monitor and then
turn it back on.
INPUT
Selects the input mode.
MONITOR
ENERGY INPUT
SAVING
OFF
ON
1/a/A Button
This button selection is not
applicable.
ꢀ. , ! ꢁABC ꢂDEF
ꢃGHI ꢄJKL ꢅMNO
Number and Alphabet buttons
Enters numbers.
The alphabet selection is not
applicable.
ARC
Selects the Aspect Ratio
Mode.
ꢆ ꢇTUV ꢈWXYZ
PQRS
CLEAR
This button selection is not
applicable.
1/a/A
CLEAR
ꢉ- * #
MARK
Volume Up / Down
ARC
Adjusts the volume level.
P
A
G
E
BRIGHT
NESS
PSM
MUTE
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
PSM
Selects the Picture Status
Mode.
AUTO
MENU
MUTE
Mutes all sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL 13
MENU (See p.39)
Accesses the main menus
or saves your input and exit
menus.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
Navigation buttons
Scrolls through menus or
options.
NESS
E
MUTE
AUTO
S.MENU
MENU
S.MENU
OK
Selects menus or options and
confirms your input.
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
Allows the user to move back
one step.
EXIT
BACK
EXIT
TILE
Clears all on-screen displays
and returns to Monitor
viewing from any menu.
ID
ON
OFF
TILE
Selects the TILE Mode.
ID ON/OFF
When more than one monitor
is present in the same room,
this allows you to control them
individually.
USB Menu control buttons
Controls media playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 USING THE MONITOR SET
USING THE MONITOR
Connecting to a PC
CAUTION
Your Monitor supports the Plug & Play* feature.
Connect the signal
y
input cable and tighten
it by turning the screws
clockwise.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
Do not press the
y
screen with your finger for a long time as
this may result in temporary distortion on the
screen.
Avoid displaying a fixed image on the screen
for a long period of time to prevent image
burn. Use a screensaver if possible.
y
NOTE
It is recommended to use the Monitor with
the HDMI connection for the best image
quality.
Use a shielded signal interface cable, such
as D-sub 15 pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
y
y
If you turn the Monitor on when the set
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
on the screen. This is normal.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 15
RGB connection
DVI-D connection
Transmits the analog video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the 15 pin signal cable as shown the
following illustrations.
Transmits the digital video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the DVI cable as shown the following
illustrations.
Select RGB input source on the monitor.
Select DVI-D input source on the monitor.
Macintosh Adapter
(not included)
(not included)
(not included)
RGB OUT (PC)
AUDIO OUT
DVI OUT
AUDIO OUT
(not included)
NOTE
Use the standard Macintosh
y
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
connect to this monitor. Call or visit their web
site for more information.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
16 USING THE MONITOR SET
HDMI connection
Display Port connection
Transmits the digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with the HDMI cable as shown in the
following illustrations.
Transmits the digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with the Display Port cable as shown in
the following illustrations.
Select HDMI input source.
Select Display Port input source.
(not included)
(not included)
DP OUT
HDMI
NOTE
Use a High Speed HDMI™ Cable.
Please check the PC environment if you
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
y
y
If you want to use HDMI PC mode, you must
set PC/DTV to PC mode.
When HDMI PC is used, a compatiblity
problem might occur.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 17
Customizing image options
Adjusting the screen
Customize basic and advanced options of each
image mode for the best screen performance.
Selecting an image mode
Display images in its optimized settings by
selecting one of the preset image modes.
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
PICTURE and press OK.
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
PICTURE and press OK.
Press the Navigation buttons to scroll to
Picture Mode and press OK.
3
4
5
Press the Navigation buttons to scroll to
Picture Mode and press OK.
3
4
Press the Navigation buttons to scroll to an
image mode you want and press OK.
Press the Navigation buttons to scroll to an
image mode you want and press OK.
Select and adjust the following options, and
then press OK.
Mode
Vivid
Description
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Option
Description
Backlight
Adjusts the brightness of the screen
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Standard
Cinema
Adjusts the image for a normal
environment.
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright parts of the
picture are saturated.
Sport
Game
Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Brightness
Sharpness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark areas of the picture are
saturated.
Optimizes the video image for a fast
gaming screen such as PCs or games.
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Tint
Adjusts intensity of all colors.
Adjusts the balance between red and
green levels.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Control
Customizes the advanced options.
Refer to the Advanced image options.
Picture Reset Restores the options to the default
setting.
When you are finished, press EXIT.
6
When you return to the previous menu, press
BACK.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 USING THE MONITOR SET
Customizing PC display options
Adjusting the sound
Customize options of each image mode for the
best image quality.
Selecting an sound mode
This Monitor has 5 preset sound modes to
compliment different types of video content.
This function works in the following mode:
RGB[PC] mode.
y
Press MENU to access the main menus.
1
2
Press MENU to access the main menus.
1
Press the Navigation buttons to scroll to
AUDIO and press OK.
Press the Navigation buttons to scroll to
PICTURE and press OK.
2
3
4
Press the Navigation buttons to scroll to Sound
Mode and press OK.
3
4
Press the Navigation buttons to scroll to
Screen and press OK.
Press the Navigation buttons to scroll to a
sound mode you want and press OK.
Select and adjust following options, and then
press OK.
Option
Description
Mode
Description
Resolution Selects a proper resolution. See
Standard
Select when you want standard-quality
sound.
“Customizing PC display options”.
Auto
Adjusts the screen position, clock, and
phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Music
Cinema
Sport
Select when you listen to music.
Select when you watch movies.
Select when you watch sport events.
Selects when you play games.
Config.
Game
Position/
Adjusts the options when the picture is
not clear, especially when characters are
shaky. Run Auto Config. before adjusting
these.
Size/Phase
When you are finished, press EXIT.
5
Reset
Restores the options to the default
setting.
When you return to the previous menu, press
BACK.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 19
Customizing sound options
Using additional options
You may customize options of each sound mode
for the best sound quality.
Adjusting aspect ratio
Press MENU to access the main menus.
1
2
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
content.
Press the Navigation buttons to scroll to
AUDIO and press OK.
Press the Navigation buttons to scroll to Sound
Mode and press OK.
3
4
5
CAUTION
Press the Navigation buttons to scroll to a
sound mode you want and press OK.
If a fixed image displays on the screen for a
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.
y
y
Select and adjust following options, and then
press OK.
Option
Description
LG's Infinity Sound option provides 5.1
channel stereo quality sound from two
speakers.
Infinite
Sound
NOTE
Treble
Bass
Controls the dominant sounds in the
output. When you turn up the treble, it
will increase the output of the higher
frequency range.
You can also change the image size by
accessing the main menus.
y
Controls the softer sounds in the
output. When you turn up the bass, it
will increase the output of the lower
frequency range.
Reset
Resets the sound mode to the default
setting.
AV Component RGB Display
Port
DVI-D
HDMI
MODE
When you are finished, press EXIT.
6
ARC
16:9
PC DTV PC DTV PC DTV PC
When you return to the previous menu, press
o
x
x
o
o
o
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
BACK.
Just Scan
1:1
4:3
Zoom
Cinema
Zoom1
Download from Www.Somanuals.com. All Manuals Search And Download.
20 USING THE MONITOR SET
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 21
Using the input list
Selecting an input source
Press INPUT to access the input source list.
1
- The connected device displays on each input
source.
Press the Navigation buttons to scroll to one of
the input sources and press OK.
2
Input source
AV(CVBS)
Description
Watch video from a VCR or other
external devices.
Component Watch content from a DVD or other
external devices, or through a
digital set-top box
RGB
View a PC display on the screen
Display Port Watch content from a PC, DVD
of Digital set-top box other high
definition devices
DVI-D
HDMI
View a PC display on the screen
Watch content from a PC, DVD
of Digital set-top box other high
definition devices
Download from Www.Somanuals.com. All Manuals Search And Download.
22 ENTERTAINMENT
ENTERTAINMENT
To set up the network seetings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),
Connecting to a wired network
(Depending on model)
1 Press MENU to access the main menus.
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustra-
tion and set up the network settings.
This monitor only supports a wired network con-
nection.
2 Press the Navigation buttons to scroll to NET-
WORK and press OK.
3 Press the Navigation buttons to select Net-
work Setting and press OK.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
4 If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP address-
es will need to be input manually.
For detail information, contact your internet pro-
vider or router manual.
- IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.
LAN
LAN
WAN
Router
6 When you are finished, press EXIT.
ETHERNET
@
Cable modem
Internet
t
CAUTION
y Network setting menu will not be available
until the display is connected to physical
network.
CAUTION
y Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
y Do not connect a modular phone cable to the
LAN port.
y Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 23
required when using a wired connection to this
display. If your internet service does not allow for
such a connection, you will not be able to con-
nect the display.
NOTE
y If you want to access the Internet directly on
your display, the internet connection should
always be on.
y If you cannot access the Internet, check
the network conditions from a PC on your
network.
y When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
y If you do not complete the network settings,
the network may not work properly.
y A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub-scription to one device, this display may
not be allowed to connect when a PC is already
connected.)
y The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Tips for Network setting
y Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
y Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or discon-
nect the power cable of the home network router
or cable modem. Then power on and/or connect
the power cable again.
y Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable
terms of service. For details, contact your ISP.
y LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions as-
sociated with your internet connection, or other
connected equipment.
Network Status
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NET-
WORK and press OK.
3 Press the Navigation buttons to select Net-
work Status.
y LG is not responsible for problems within your
internet connection.
4 Press OK to check the network status.
y You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
y Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
Internet connection.
y Any fees charged by an ISP including, without
limitation, connection charges are your respon-
sibility.
5 When you are finished, press EXIT.
Option
Setting
Description
Return to the network setting menu.
Test the current network status after set-
Test
ting the network.
Close
Return to the previous menu.
y A 10 Base-T or 100 Base-TX LAN port is
Download from Www.Somanuals.com. All Manuals Search And Download.
24 ENTERTAINMENT
Tips for using USB storage devices
Connecting USB storage devices
y Only a USB storage device is recognizable.
y If the USB storage device is connected
through a USB hub, the device is not recog-
nizable.
You can connect USB storage devices such as
a USB flash memory, external hard drive to the
display and use multimedia features .
Connect a USB flash memory or USB memory
card reader to the Display as shown on the follow-
ing illustration. The My media screen appears.
y A USB storage device using an automatic
recognition programme may not be recog-
nized.
y A USB storage device which uses its own
driver may not be recognized.
y The recognition speed of a USB storage
device may depend on each device.
y Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
or
y Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
y Please use only a USB storage device which
was formatted as a FAT32 file system or
NTFS file system provided with the Win-
dows operating system. In case of a storage
device formatted as a different utility program
which is not supported by Windows, it may
not be recognized.
CAUTION
y Do not turn the display off or remove a USB
storage device while the EMF(my media)
Menu is activated, as this could result in
loss of files or damage to the USB storage
device.
y Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
y Back up your files saved on a USB storage
device frequently, as you may lose or dam-
age the files and this may be not covered by
the warranty.
y Please connect a USB storage device with
the cable offered by the device maker.
y Some USB storage devices may not be sup-
ported or operated smoothly.
y File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
y Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 25
y If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
Browsing files
Access the photo, music, or movie lists and browse
files.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
y If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
Connect a USB storage device.
1
2
3
Press MENU to access the main menus.
Press the Navigation buttons to scroll to My
Media and press OK.
Press the Navigation buttons to choose
from Movie List, Photo List, Music List or
Contents List and press OK.
4
y If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
y If the USB memory device does not work
properly, disconnect and reconnect it.
y How fast a USB memory device is detected
differs from device to device.
Movie List
Photo List
Music List
Contents List
y If the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
y The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
1
2
Page 1/1
Photo List
Page 1/1
009
Drive1
USB External
4
5
001
010
002
003
012
004
013
005
006
015
007
008
y Any device with more than the recommended
capacity may not work properly.
011
014
y If a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
Move
View
Page Change
Mark
Change Numbers
Mark Mode
Exit
To Music List
3
y USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
No.
Description
Moves to upper level folder
Current page/Total pages
1
y Maximum of 999 folders or files can be rec-
ognized under one folder.
2
3
Corresponding buttons on the
remote control
Current page/ total pages of
contents under the folder
y It is recommended to use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
4
1
focused on
Contents under the folder
5
1
focused on
Buttom
Description
Repeatedly, press the GREEN button to
y Only a USB memory stick can be used to
play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
Green converted to Movie List->Photo List, Photo
button List->Music List, Music List->Contents
List or Contents List->Movie List.
Yellow A method to view in 5 large thumbnail
button or simple list.
y Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
Blue
Convert to Mark Mode.
button
y A USB 3.0 storage device may not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 ENTERTAINMENT
File
Extensions
Item
Profile
Supported File Formats
Photo JPEG
supported
file format
SOF0:
baseline
SOF1:
Extend
Sequential
SOF2:
y
y
JPG
PNG
BMP
Type
Movie
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
y
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
Progressive
Photo size
Bit rate
Min: 64 x 64
Max Type:
1366 x 768
y
y
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Music MP3
32 kbps to 320
kbps
Video format : DivX3.11, DivX4.12, DivX5.x,
DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03,
Xvid1.10 beta-1/beta-2,
Sampling
rate
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
Photo
Music
JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
y
y
You can play JPEG files only.
Non-supported files are displayed in the form
of predefined icon.
Viewing movies
MP3
Bit rate 32 to 320
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
y
y
y
Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
Content
(when
using
SuperSign
Manager)
File Extensions : *.cts/ *.cse
Movie
1 Press the Navigation buttons to scroll to My
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Media and press OK.
2 Press the Navigation buttons to scroll to Movie
List and press OK.
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xwvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 27
Page 1/1
6 Control playback by using the following buttons.
Movie List
Page 1/1
Drive1
USB1 USB Drive
001
005
002
006
003
004
Move
Play
Page Change
Exit
Mark
01:02:30 / 02:30:25
Hide
Exit
Option
Change Numbers
Mark Mode
To Photo list
Page 1/1
Movie List
Mark Mode
Page 1/1
Drive1
USB1 USB Drive
Button
Description
Stops the playback
Plays a video
001
005
002
006
003
004
051. Apple_ ......
02:30:25
Pauses or resumes the playback
Scans backward in a file
Move
Mark
Page Change
Mark
Scans forward in a file
Mark All
Unmark All
Exit Mark Mode
Exit
Play Marked
Show the Option menu.
Hide the menu on the full-sized screen.
Return to Movie List.
Menu
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Skips to specific points in a file dur-
ing playback. The time of a specific
point will appear on the status bar. In
some files, this function may not work
properly.
Play Marked
or
Mark All
Mark all movie files on the screen.
Deselect all marked movie files.
Press the
ENERGY SAVING button
Unmark All
repeatedly to increase the brightness
of your screen.
ENERGY
SAVING
Exit Mark Mode Exit the Mark Mode.
5 Play a movie.
NOTE
y Non-supported files are displayed the preview
image by icon only
y Abnormal files are displayed in the form of
bitmap
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 ENTERTAINMENT
Tips for using playing video files
When you are watching the movie by Movie
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
y
y Some user-created subtitles may not work
properly.
y Some special characters are not supported
in subtitles.
y HTML tags are not supported in subtitles.
y Subtitles in languages other than the sup-
ported languages are not available.
y The screen may suffer temporary interrup-
tions (image stoppage, faster playback, etc.)
when the audio language is changed.
y A damaged movie file may not be played
correctly, or some player functions may not
be usable.
Video options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
y Movie files produced with some encoders
may not be played correctly.
y If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
NOTE
y HD videos with a maximum of
y Option values changed in Movie List does
not affect Photo List and Music List.
y Option value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
y When replaying the video file after stopping,
you can play from where it stopped previ-
ously.
1920x1080@25/30P or 1280x720@50/60P
are supported, depending on the frame.
y Videos with resolutions higher than
1920X1080@25/30P or 1280x720@50/60P
may not work properly depending on the
frame.
y Movie files other than the specified types and
formats may not work properly.
y Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
y We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
y DTS Audio codec is not supported.
y A movie file more than 30 GB in file size is
not supported for playback.
y A DivX movie file and its subtitle file must be
located in the same folder.
y A video file name and its subtitle file name
must be identical for it to be displayed.
y Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
y Files encoded with GMC(Global Motion
Compensation) may not be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 29
Support Language
When you select the Set Video Play,,
Code Page
Latin1
English, Spanish, French,
1 Press the Navigation buttons to scroll to show
the Picture Size, Audio Language, Subtitle
Language or Repeat.
German, Italian, Swedish, Finnish,
Dutch, Portuguese, Danish, Roma-
nian, Norwegian, Albanian, Gaelic,
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
Latin2
Slovak, Slovenian, Serbian,
Hungarian
Latin4
Estonian, Latvian, Lithuanian
Menu
Description
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Picture Size
Selects your desired picture
format during movie play.
Audio
Changes the Language Group of the
Greek
Greek
Language
audio during movie play. Files
with a single audio track cannot be
selected.
Korean
Korean
Subtitle Lan-
guage
Turn on/off the subtitle.
Language
Code Page
Sync
Activated for SMI subtitle and
can select the language within the
subtitle.
NOTE
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
y Only 10,000 of sync blocks can be support-
ed within the subtitle file.
y When playing a video, you can adjust the
Picture Size by pressing the RATIO button.
y Subtitles in your language are only sup-
ported when the OSD menu is also in this
language.
Position
Changes the position of the
subtitle either up or down during
movie play.
y The code page options may be disabled de-
pending on the language of the subtitle files.
y Select the appropriate code page for the
subtitle files.
Size
Selects your desired Subtitle size
during movie play.
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 ENTERTAINMENT
Page 1/1
When you select the Set Video,,
Photo List
Page 1/1
009
USB1 USB Drive
Drive1
1 Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
003
012
004
013
005
006
015
007
008
011
014
Move
View
Page Change
Mark
When you select the Set Audio,,
Change Numbers
Mark Mode
Exit
To Music List
1 Press the Navigation buttons to scroll to show
Page 1/1
Photo List
the Sound Mode, Clear Voice II or Balance.
Mark Mode
Page 1/1
009
USB1 USB Drive
Drive1
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
003
004
013
005
014
006
015
007
008
011
012
Move
Mark
Page Change
Mark
Mark All
Unmark All
Exit Mark Mode
Exit
View Marked
Viewing photos
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
Menu
Description
Display the selected photo file.
View Marked
Mark All
1 Press the Navigation buttons to scroll to My
Mark all photo files on the screen.
Deselect all marked photo files.
Media and press OK.
Unmark All
2 Press the Navigation buttons to scroll to Photo
Exit Mark Mode Exit the Mark Mode.
List and press OK.
3 Press the Navigation buttons to scroll to a
5 View photos.
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
y Non-supported files are displayed the pre-
view image by icon only
y Abnormal files are displayed in the form of
bitmap
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 31
Using photo options
Press the ENERGY SAVING button
repeatedly to change the brightness of
your screen.
ENER-
GY SAVING
Use the following options while viewing photos.
y Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
y TransitionEffect: Set the view mode
of the slideshow.
Option
y BGM: Selects a music folder for the
background music.
NOTE
y You cannot change the music
folder while the background
music is playing.
y You can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Hide
Option
Exit
Slideshow
BGM
Options
Number of selected photos
Hides the option window.
To display the options, press OK.
Return to Photo List.
Hide
EXIT
Option
Description
Slideshow Starts or stops a slideshow with selected
photos.
If there are no selected photos, all pho-
tos saved in the current folder display
during a slideshow.
Select Option to set the speed and view
mode of the slideshow.
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
Photo options
You can adjust Option by MENU button
on the remote control.
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View., Set Video. or Set Audio. and
press OK.
Rotates photos clockwise (90°, 180°,
270°, 360°).
Rotate
NOTE
y The supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
NOTE
y Option values changed in Movie List does
not affect Photo List and Music List.
y Option value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
Enlarges the image to 200% or 400%.
Zoom
NOTE
y Zoom to 200% or 400% only
work for image of 1372×772
pixel size or larger.
y For image of 960×540 pixel
size or larger, only zoom to
400% works properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 ENTERTAINMENT
When you select the Set Photo View,
1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.
2 Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Sliding
Description
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Fade In
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide
Fades the slide out slowly before playing to the next slide.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 33
When you select the Set Video,
Listening to music
1 Press the Navigation buttons to scroll to make
appropriate adjustments.
1 Press the Navigation buttons to scroll to My Me-
dia and press OK.
2 Press the Navigation buttons to scroll to Music
When you select the Set Audio,
List and press OK.
1 Press the Navigation buttons to scroll to show
3 Press the Navigation buttons to scroll to a folder
the Sound Mode, Clear Voice II or Balance.
you want and press OK.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
Page 1/1
USB1 USB Drive
Drive1
001.
-
B01.mp3
002. -B02.mp3
00:00
003. B03.mp3
00:00
004.
-
B04.mp3
00:00
00:00
005.
-
B05.mp3
00:00
Move
Play
Page Change
Mark Mode
Mark
Change Numbers
To Movie List
Exit
Page 1/1
Music List
Mark Mode
Page 1/1
USB1 USB Drive
Drive1
001.
-
B01.mp3
B05.mp3
002. -B02.mp3
00:00
003. B03.mp3
00:00
004.
-
B04.mp3
00:00
00:00
005.
-
00:00
Move
Mark All
Mark
Page Change
Mark
Exit
Play Marked
Unmark All
Exit Mark Mode
Menu
Description
Play Marked Display the selected music file.
Mark All
Mark all music files on the screen.
Unmark All Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 ENTERTAINMENT
Tips for playing music files
6 Control playback by using the following buttons.
This unit doesn't support the ID3 Tag
embedded MP3 files.
y
Page 1/1
Music List
3
file(s) Marked
Drive1
Page 1/1
NOTE
004.
-
B04.mp3
005.
-
B05.mp3
006.
-
B06.mp3
007.
-
B07.mp3
008.
-
B08.mp3
00:00
00:00
00:00
00:00
00:00
005. - B05.mp3
02:30 / 03:25
Hide
Exit
Play with Photo
Option
y Non-supported files are displayed the pre-
view image by icon only
y Abnormal files are displayed in the form of
bitmap
.
Button
Description
.
Stops playback
y A damaged or corrupted music does not play
but displays 00:00 in playtime.
Plays a music file
y A music downloaded from a paid service with
copyright protection does not start but dis-
plays inappropriate information in playtime.
Pauses or resumes playback
Skips to the next file
Skips to the previous file
When playing,
y If you press OK,
buttons, screen saver is
or
stopped.
When you press the
button, the pre-
y The PLAY( ), Pause( ),
,
,
but-
vious music file will be played.
tons on the remote control are also available
in this mode.
When you press the
button, the next
music file will be played.
y You can use the
music and the
ous music.
button to select the next
button to select the previ-
Green
button
Start playing the selected music files and
then move to the Photo List.
Press the
ENERGY SAVING button
repeatedly to change the brightness of
your screen.
ENERGY
SAVING
Show the Option menu.
Option
Hide
file name
Hides the option window.
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
002. B02.mp3
00:31 / 04:04
EXIT
Time elapsed /Duration
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
or
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 35
Music options
Viewing the Contents List
Plays back the stored files using the Export option
in SuperSign Manager.
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set Au-
1 Press the Navigation buttons to scroll to My
Media and press OK.
dio Play. or Set Audio. and press OK.
2 Press the Navigation buttons to scroll to Con-
NOTE
tents List and press OK.
y Option values changed in Movie List does
not affect Photo List and Music List.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
y Option value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Contents List
Page 1/1
USB1 USB Drive
Drive1
When you select the Set Audio Play.,
test1.cts
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
07/01/2011
test5.cts
07/01/2011
1 Press the Navigation buttons to scroll to select
the Repeat or Random.
Move
Change Numbers
Play
P
Page Change
To Movie List
Exit
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
NOTE
When you select the Set Audio,,
y While playing media files from Contents List,
only the BACK, EXIT or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
y If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
1 Press the Navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 ENTERTAINMENT
DivX® VOD Guide
DivX® VOD Registration
NOTE
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
y While you are checking the registration code,
some buttons may not work.
y If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use the
DivX registration code assigned to your TV.
y The video or audio files that are not con-
verted by the standard DivX codec may be
corrupted or not be played.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to DivX
y The DivX VOD code allows you to activate
up to 6 devices under one account.
Reg. Code and press OK.
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device
to play DivX protected videos.
Registration code : **********
Close
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 37
DivX® VOD Deregistration
Using PIP/PBP
You should deregister your device with 8 digit DivX
com/vod.
Videos or pictures stored on the USB device can
be displayed on a single monitor by dividing them
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
1 Press the MENU button to move to OPTION
3 Press the Blue button.
and press OK.
4 Press the Navigation buttons to scroll to Deacti-
2 Press PIP/PBP to select PIP or PBP and then
vation and press OK.
press OK.
5 Press the Navigation buttons to select Yes to
confirm.
PIP/PBP
Prev.
Move
Mode
Position
Size
Off
PIP
PBP
Deregistration code :
********
Continue with registration?
Yes
No
6 When you are finished, press EXIT.
3 Select Movie List or Photo List from My
When you return to the previous menu, press
BACK.
Media.
NOTE
Contents List
Movie List
Photo List
Music List
Once the deregistration is executed, you
must register your device again to see
DivX® VOD contents.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
38 ENTERTAINMENT
4 Select a file you want and then press OK.
6 For sound select either Main or Sub. You must
to select the output sound before running the
PIP or PBP function.
Page 1/1
Movie List
Page 1/1
Drive1
USB1 USB Drive
001
005
002
006
003
004
051. Apple_ ...
02:30:25
Select the sound path.
Main
Sub
Move
Play
Page Change
Exit
Mark
Change Numbers
Mark Mode
To Photo list
7 The sub screen is displayed on the main screen.
5 Select the PIP or PBP icon from the play list.
01:02:30 / 02:30:25
Hide
Exit
Option
< MOVIE LIST >
2/13
Hide
Option
Exit
Slideshow
BGM
< PHOTO LIST >
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 39
CUSTOMIZING SETTINGS
Accessing main menus
ARC
UTE
Press MENU to access the main menus.
1
2
AUTO
MENU
S.MENU
Press the Navigation buttons to scroll to one of the following menus and
press OK.
OK
BACK
ID
TILE
EXIT
ON
OFF
Press the Navigation buttons to scroll to the setting or option you want
and press OK.
3
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.40)
Adjusts the image size,
quality, or effect.
AUDIO (See p.43)
Adjusts the sound quality,
effect, or volume level.
TIME (See p.44)
Sets the time, date, or
Timer feature.
PICTURE
AUDIO
TIME
MY MEDIA (See p.25)
Display and play movie,
photo and music content
stored on your USB
OPTION (See p.45)
Customizes the general
settings.
OPTION
NETWORK
MY MEDIA
NETWORK (See p.50)
Sets up the network
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 CUSTOMIZING SETTINGS
PICTURE settings
Move
OK
PICTURE
Aspect Ratio
Press MENU to access the main menus.
1
2
Energy Saving
Smart Energy Saving
Picture Mode
Screen
Press the Navigation buttons to scroll to PICTURE and
press OK.
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
The available picture settings are described in the following:
Setting
Description
Aspect Ratio
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Level
Energy Saving
Auto
Off
Adjust automatically
Disables Energy Saving function
Selects the brightness level of the backlight.
Minimum/
Medium/
Maximum
Screen off
The screen turns off in 3 seconds.
Smart Energy Adjusts the backlight and contrast depending on the screen brightness.
Saving
Level
Off
On
Disables the Smart Energy Saving function.
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Picture Mode
Selects one of the preset image or customizes options in each mode for the best Monitor screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Colour, and sharpness.
Standard
Cinema
Adjusts the image for the normal environment.
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Game
Optimizes the video image for high and dynamic actions by emphasizing primary
Colours such as white, grass, or sky blue.
Optimizes the video image for a fast gaming screen such as PCs or games.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 41
Setting
SCREEN
Description
Customizes the PC display options in RGB mode.
(In RGB
Mode Only)
Option
Resolution
Auto Config.
Selects a proper resolution. See “Customizing PC display options”.
Adjusts the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky. Run Auto Config. before adjusting these.
Reset
Restores all options to the default setting.
Picture Mode options
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Sharpness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp.
Advanced Control
Picture Reset
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Customizes the advanced options. Refer to the Advanced image options. (See p.42).
Restores the options to the default setting.
NOTE
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
disabled.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
42 CUSTOMIZING SETTINGS
Advanced Control
Setting
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen.
Dynamic Contrast
(Off/High/Medium/Low) The
picture is improved by making bright parts brighter and dark parts darker.
(Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV )
Dynamic Color
(Off/High/Low)
Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid.
(Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV )
Clear White
Make the white area of screen brighter and more white.
(Off/High/Low)
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
Reduces screen noise without compromising video quality.
(Off/High/Medium/Low)
(Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV )
Digital Noise Reduction This option reduces the noise produced while creating digital video signals.
(Off/High/Medium/Low)
Gamma
(High/Medium/Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and
low gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV )
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 43
AUDIO settings
AUDIO
Move
OK
Clear Voice II
Balance
Press MENU to access the main menus.
1
2
Sound Mode
Digital Audio Input
Speaker
Press the Navigation buttons to scroll to AUDIO and press
OK.
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others,it helps users makes dialog easier to
understand.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Mode
Sound Mode
Standard
Music
Select when you want standard-quality sound.
Select when you listen to music.
Cinema
Sport
Select when you watch movies.
Select when you watch sport events.
Selects when you play games.
Game
Digital Audio
Input
HDMI/Display Port: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
Sound Mode options
Setting
Infinite Sound
Treble
Description
LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers.
Controls the dominant sounds in the output. When you turn up the treble, it will increase the
output to the higher frequency range.
Bass
Controls the softer sounds in the output. When you turn up the bass, it will increase the output
to the lower frequency range.
Reset
Resets the sound mode to the default setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 CUSTOMIZING SETTINGS
TIME settings
TIME
Move
OK
Clock
Press MENU to access the main menus.
1
2
Off Time
On Time
Press the Navigation buttons to scroll to TIME and press
OK.
Sleep Timer
Power On Delay
Auto Off
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3
4
Automatic Standby
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
Off/On Time
Sleep Timer
Sets the time to turn on or off the Monitor.
Sets the length of time until the Monitor to turns off. When you turn the Monitor off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
Auto off
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in off mode automatically.
NOTE
Off/On Time can be saved for up to seven schedules; the Monitor is turned on or off at the preset time in the schedule
list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the current time.
The scheduled power-off function works properly only when the device time is set correctly.
When the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time
if the set is turned on, and vice versa if the set is turned off.
y
y
y
"The ""Automatic Standby"" and ""Auto off"" functions may not be available in some countries."
y
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 45
OPTION settings
OPTION
Move
OK
Language
Press MENU to access the main menus.
1
2
Power Indicator
ISM Method
DPM Select
Fail Over
Press the Navigation buttons to scroll to OPTION and press
OK.
Factory Reset
Set ID
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3
4
Tile Mode
PIP/PBP
- To return to the previous level, press BACK.
Key Lock
Product/Service Info.
Portrait Mode
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language
Description
To choose the language in which the control names are displayed.
Use this function to set the power indicator on the front side of the product to On or Off.
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
Power Indicator
ISM Method
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Orbiter
Leave on normal if you don't foresee image burn in being a problem.
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
Fail Over
A user can choose to turn the power saving mode on / off.
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
Factory Reset
Set ID
Select this option to return to the default factory settings.
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 99) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Download from Www.Somanuals.com. All Manuals Search And Download.
46 CUSTOMIZING SETTINGS
Setting
Tile Mode
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 5 x 5 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Adjusts the screen position automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
PC Position
PC Size
Moving the screen position horizontally and vertically.
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
Reset
The image is omitted by the distance between the screens to be naturally
shown.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
NOTE
If Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be
disabled to provide the same picture quality as other displays.
y
PIP/PBP
Videos or photos stored on the USB device can be displayed on a single monitor by dividing them
into the main and subscreens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Size
Adjusts the position of the subscreen (top left, bottom left, top right, bottom
right) The default value is inthe bottom right.
Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size:
0) is 480x240; the maximum size (Size: 10) is 960x540.
NOTE
The Position and Size options are enabled only in PIP mode.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 47
Setting
Key Lock
Description
Key input does not work. This prevents invalid key input.
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
Portrait mode
Rotate OSD clockwise (90°,270°)
Option
90°
Rotate OSD clockwise 90°.
Rotate OSD clockwise 270°.
270°
90°
270°
Download from Www.Somanuals.com. All Manuals Search And Download.
48 CUSTOMIZING SETTINGS
Tile Mode
Tile Mode - Natural mode
This monitor can be tiled with additional monitors
to create a large tiled display.
When active, the part of the image that would
normally be displayed in the gap between the
monitors is omitted.
2X1
Off
When using 2 monitors
When the Tile Mode
option is disabled
Before
ID 2
ID 1
Tile ID
3X3
2X2
When using 9 monitors
When using 4 monitors
ID 3
ID 6
ID 2
ID 4
ID 2
ID 5
ID 1
ID 3
ID 1
ID 4
After
ID 9
ID 8
ID 7
4X4
When using 16 monitors
ID 1
ID 5
ID 3
ID 7
ID 4
ID 8
ID 2
ID 6
ID 11
ID 15
ID 12
ID 16
ID 10
ID 14
ID 9
ID 13
5X5
When using 25 monitors
ID 3
ID 4
ID 5
ID 2
ID 1
ID 8
ID 9
ID 10
ID 15
ID 7
ID 6
ID 13
ID 18
ID 23
ID 14
ID 19
ID 24
ID 12
ID 11
ID 16
ID 21
ID 20
ID 25
ID 17
ID 22
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 49
PIP/PBP
NOTE
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
The subscreen is only supported when using the
USB device.
y
Sub
USB
Mode
Component
O
O
O
X
*PIP(Picture In Picture): Displays the Sub screen
in the main screen.
*PBP(Picture By Picture): Displays the Sub
screen next to the main screen.
RGB
Main
HDMI/DVI-D/Display Port
AV
You can only change the size and position in PIP
mode.
y
y
y
y
Sub
screen
With PBP selected, theAspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
While running the PBP function, the Tile Mode function
does not work.
Main
screen
PIP
PBP
You must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
If you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
y
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
You cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
y
y
y
The picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
top left
top right
Even when the power is turned off or on, if the
USB device is connected, the PIP/PBP mode plays
again from where it left off.
If you play videos you selected in PIP/PBP mode,
the videos will play back repeately in succession.
The buttons below work in PIP mode.
y
y
Button
Photo
Movie
bottom left
Size
bottom right
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0 :
480x270
< 1920x1080 >
Download from Www.Somanuals.com. All Manuals Search And Download.
50 CUSTOMIZING SETTINGS
NETWORK settings
NETWORK
Move
OK
Player Name
Press MENU to access the main menus.
1
2
Network Setting
Network Status
Server IP Setting
Server IP Status
Press the Navigation buttons to scroll to NETWORK and
press OK.
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3
4
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Configure the network settings.
Network Setting
Network Status
Display the network status.
- Internet is connected : Extermally connected
- Home network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
continuously.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 51
MAKING CONNECTIONS
Connect various external devices to the ports on the Monitor’s back panel.
Find an external device you want to connect to your Monitor shown on the following illustration.
Check the connection type of the external device.
1
2
3
Go to the appropriate illustration and check the connection details.
HD Receiver
DVD
VCR
Speaker
USB
Memory storage
PC
Gaming device
Camcorder/Camera
NOTE
If you connect a gaming device to the Monitor, use the cable supplied with the gaming device.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
52 MAKING CONNECTIONS
Component connection
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
Transmits the analog video and audio signals
from an external device to the Monitor. Connect
the external device and the Monitor with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Connect a HD receiver, DVD, or VCR player to the
Monitor and select an appropriate input mode.
HDMI connection
Transmits the digital video and audio signals from
an external device to the Monitor. Connect the
external device and the Monitor with the HDMI
cable as shown on the following illustration.
(not included)
AUIO OT
(not included)
(not included)
HDMI
NOTE
Use a High Speed HDMI™ Cable.
High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 53
AV(CVBS) connection
Connecting to a USB
Transmits the analog video and audio signals
from an external device to the Monitor. Connect
the external device and the Monitor with the 15
pin signal to RCA cable as shown on the following
illustration.
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor and
access the USB menu to use various multimedia
files.
(not included)
or
(not included)
Download from Www.Somanuals.com. All Manuals Search And Download.
54 MAKING CONNECTIONS
Connecting to the LAN
NOTE
Using LAN establishes communication
between your PC and the monitor and
enables to use the OSD menus on the PC as
well as on the monitor.
y
LAN connection
Connect PC to Monitor directly.
LAN
A
B
C
Monitor
PC
Using a router(Switch)
LAN
Switch
Monitor
PC
Using the Internet.
LAN
Network
PC
Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 55
Daisy Chain Monitors
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub
Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector
of other products
Monitor 1
Monitor 2
Monitor 3
Monitor 4
15-pin D-Sub Signal Cable
(Max 3m)
RGB OUT (PC)
RGB
Mode
Component
Mode
AV(CVBS)
Mode
NOTE
The number of monitors that can be connected to one output may vary depending on signal status
and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to
9 monitors. If you want to connect more than this number of monitors, it is recommended to use a
distributor.
y
y
When multi-connecting in/out cascade format, no loss cables are recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
56 TROUBLESHOOTING
TROUBLESHOOTING
No image is displayed
Problem
Resolution
Is the product power cord
connected?
See if the power cord is properly connected to the outlet.
y
Is the power indicator light on?
See if the power switch is turned on.
May need service.
y
y
Power is on, power indicator
is blue but the screen appears
extremely dark.
Adjust brightness and contrast again.
Backlight may need repair.
y
y
The power indicator amber?
If the product is in power saving mode, move the mouse or press any
y
key.
Turn both devices off and then back on.
y
y
Does the 'Out of range'
message appear?
The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB, HDMI, DVI-D, Display Port : 1920 x 1080 @ 60 Hz
Does the 'Check signal cable'
message appear?
The signal cable between PC and product is not connected. Check
the signal cable.
Press the 'INPUT' menu in the remote Control to check the input
signal.
y
y
'Unknown Product' message appears when the product is connected.
Problem
Resolution
Did you install the driver?
Install the product driver, which is provided with the product, or
download it from the web site. (http://www.lg.com)
See if the plug&play function is supported by referring to the video
card user manual.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 57
'Key Lock On' message appears.
Problem
Resolution
The 'Key Lock On' message
appears when pressing the
Menu button.
The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
y
See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
y
y
Do thin lines appear on the
background screen?
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the
characters look blurred.
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
y
y
The screen is displayed
abnormally.
The proper input signal is not connected to the signal port. Connect
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
Resolution
After-image appears when the
product is turned off.
If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
58 TROUBLESHOOTING
The audio function does not work.
Problem
Resolution
No sound?
See if the audio cable is connected properly.
Adjust the volume.
See if the sound is set properly.
y
y
y
Sound is too dull.
Sound is too low.
Adjust the Clear Voice ll, Treble and Bass appropriately.
Adjust the volume.
y
y
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution
(16 colors).
Set the number of colors to more than 24 bits (true color) Select
Control Panel - Display - Settings - Color Table menu in Windows.
y
y
y
Screen color is unstable or
mono-colored.
Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
Resolution
The power suddenly turned off.
Is the sleep timer set?
Check the power control settings. Power interrupted
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 59
SPECIFICATIONS
42WS10
LCD Panel
Screen Type
1067.31 mm Wide (42 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1067.31 mm
Pixel Pitch
0.4845 mm (H) x 0.4845 mm (V)
Video Signal
Max. Resolution
RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
RGB : 30 kHz to 83 kHz
HDMI,DVI-D, Display Port : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI,DVI-D, Display Port : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
Input Connector
Power
15-pin D-Sub, HDMI, DVI-D, Display Port, RS-232C, LAN,
USB, Audio
Rated Voltage
100-240 V~ 50/60 Hz 1.6 A
Power Consumption
On Mode : 115 W Typ.
Sleep Mode (RGB) : ≤ 1 W
Sleep Mode (HDMI, DVI-D, Display Port)
: ≤ 1 W (Set Only) / ≤ 2 W (With External Device)
Off Mode : ≤ 0.5 W
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 SPECIFICATIONS
Dimensions
(Width x Height x
Depth) / Weight
991.7 mm x 584.3 mm x 37.5 mm / 12.6 kg
991.7 mm x 659.2 mm x 298.3 mm / 14 kg
991.7 mm x 584.3 mm x 75.7 mm / 13.4 kg
991.7 mm x 659.2 mm x 298.3 mm / 14.8 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Speaker Impedance
8 Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 61
47WS10
LCD Panel
Screen Type
1192.78 mm Wide (47 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1192.78 mm
Pixel Pitch
0.5414 mm (H) x 0.5414 mm (V)
Video Signal
Max. Resolution
RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
RGB : 30 kHz to 83 kHz
HDMI,DVI-D, Display Port : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI,DVI-D, Display Port : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
Input Connector
Power
15-pin D-Sub, HDMI, DVI-D, Display Port, RS-232C, LAN,
USB, Audio
Rated Voltage
100-240 V~ 50/60 Hz 1.8 A
Power Consumption
On Mode : 120 W Typ.
Sleep Mode (RGB) : ≤ 1 W
Sleep Mode (HDMI, DVI-D, Display Port)
: ≤ 1 W (Set Only) / ≤ 2 W (With External Device)
Off Mode : ≤ 0.5 W
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
62 SPECIFICATIONS
Dimensions
(Width x Height x
Depth) / Weight
1102.0 mm x 646.4 mm x 37.4 mm / 17.5 kg
1102.0 mm x 720.9 mm x 298.3 mm / 18.9 kg
1102.0 mm x 646.4 mm x 74.1 mm / 18.3 kg
1102.0 mm x 720.9 mm x 298.3 mm / 19.7 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Speaker Impedance
8 Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 63
55WS10
LCD Panel
Screen Type
1387.80 mm Wide (55 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1387.80 mm
Pixel Pitch
0.630 mm(H) x 0.630 mm(V)
Video Signal
Max. Resolution
RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
RGB : 30 kHz to 83 kHz
HDMI,DVI-D, Display Port : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI,DVI-D, Display Port : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
Input Connector
Power
15-pin D-Sub, HDMI, DVI-D, Display Port, RS-232C, LAN,
USB, Audio
Rated Voltage
100-240 V~ 50/60 Hz 2.0 A
Power Consumption
On Mode : 140 W Typ.
Sleep Mode (RGB) : ≤ 1 W
Sleep Mode (HDMI, DVI-D, Display Port)
: ≤ 1 W (Set Only) / ≤ 2 W (With External Device)
Off Mode : ≤ 0.5 W
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
64 SPECIFICATIONS
Dimensions
(Width x Height x
Depth) / Weight
1281.6 mm x 752.4 mm x 37.8 mm / 21.8 kg
1281.6 mm x 825.7 mm x 298.3 mm /23.2 kg
1281.6 mm x 752.4 mm x 79.1 mm / 22.5 kg
1281.6 mm x 825.7 mm x 298.3 mm / 23.9 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Speaker Impedance
8 Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 65
Dimensions
The illustrations in this manual may differ from the actual product and accessories.
(Unit : mm)
42 inch
47 inch
55 inch
1281.6
298.3
37.8
A
B
C
D
E
F
G
H
I
991.7
298.3
37.5
1102.0
298.3
37.5
76.1
76.1
80.0
584.3
659.2
726.0
27.6
646.4
720.9
824.2
28.0
752.4
825.7
950.0
33.5
27.6
28.0
33.5
J
27.6
28.0
33.5
K
L
102.4
140.3
295.9
92.2
102.5
140.3
351.0
123.2
400.0
400.0
106.8
136.4
440.8
176.2
400.0
400.0
M
N
O
P
400.0
400.0
Product specifications shown above may be
changed without prior notice due to upgrade of
product functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
66 SPECIFICATIONS
DTV Mode
Resolution
RGB (PC) supported mode
HDMI,Display
Port (DTV)
Horizontal
Resolution
Vertical
Component
Frequency(kHz) Frequency(Hz)
480i
o
o
o
o
o
o
o
x
x
o
o
o
o
o
31.469
31.468
31.469
37.5
70.8
70.8
59.94
75
640 x 350
576i
720 x 400
480p
576p
720p
1080i
1080p
640 x 480
640 x 480
37.879
46.875
49.725
48.363
60.123
44.772
47.7
60.317
75
800 x 600
800 x 600
74.55
60
832 x 624
1024 x 768
1024 x 768
1280 x 720
1366 x 768
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
75.029
59.855
60
Power Indicator
Mode
Product
63.981
79.98
60.02
75.02
59.954
60
On Mode
Sleep Mode
Off Mode
blue
Amber
-
65.290
67.5
NOTE
When the cable is connected to the HDMI or
the display port, you can select the PC/DTV
mode optionally. It is recommended you to
set to the PC mode when connecting to PC;
the DTV mode when connecting to DTV.
y
HDMI,DVI-D,Display Port (PC) supported mode
Horizontal
Frequency(kHz) Frequency(Hz)
Vertical
Resolution
NOTE
31.469
37.879
48.363
44.772
47.7
59.94
60.317
60
640 x 480
800 x 600
1024 x 768
1280 x 720
1366 x 768
1280 x 1024
1680 x 1050
1920 x 1080
Vertical frequency: To enable the user to
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
y
y
59.855
60
63.981
65.290
67.5
60.02
59.954
60
Download from Www.Somanuals.com. All Manuals Search And Download.
IR CODES 67
IR CODES
Code (Hexa)
Function
Note
95
08
0B
C4
R/C BUTTON
R/C BUTTON
R/C BUTTON
ON/OFF
R/C BUTTON
(Discrete IR Code)
C5
R/C BUTTON
(Discrete IR Code)
43
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
40
Up
41
Down
Left
07
06
Right
44
28
5B
4D
02
Volume
Volume
03
09
E0
E1
10 to 19
72
(
(
UP)
Down) R/C BUTTON
R/C BUTTON
Number Key to
Red Key
R/C BUTTON
71
Green Key
Yellow Key
Blue Key
R/C BUTTON
63
R/C BUTTON
61
R/C BUTTON
7B
5A
BF
D5
CE
C6
E9
76
R/C BUTTON
AV(CVBS)
Component
RGB
Discrete IR Code
Discrete IR Code
Discrete IR Code
Discrete IR Code
Discrete IR Code
Discrete IR Code
Discrete IR Code
Discrete IR Code
Display Port
DVI-D
HDMI
(4:3)
77
(16:9)
AF
79
(ZOOM,Cinema Zoom 1) Discrete IR Code
R/C BUTTON
(Discrete IR Code)
99
Auto Config.
R/C BUTTON
(Discrete IR Code)
B1
B0
BA
8F
8E
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
Download from Www.Somanuals.com. All Manuals Search And Download.
68 CONTROLLING THE MULTIPLE PRODUCT
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 99 without being duplicated.
y
y
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
product on/off, select an input source or adjust the OSD menu from your PC.
y
RS-232C Cable
(not included)
PC
Monitor 1
Monitor 2
Monitor 3
Monitor 4
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
3-Wire Configurations (Not Standard)
PC
Set
PC
Set
3
2
5
6
4
7
8
3
2
5
6
4
8
7
RXD
TXD
GND
DTR
DSR
RTS
CTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
TXD
RXD
GND
DSR
DTR
CTS
RTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
Data Length : 8 bit
Parity Bit : None
Stop Bit : 1bit
Flow Control : None
y
y
y
y
y
y
y
Communication Code : ASCII code
Use a crossed (reverse) cable
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 69
Command reference list
COMMAND
DATA
1
2
3
4
5
6
7
8
9
Power
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
a
c
d
e
f
00H to 01H
01H to 1FH
00H to 01H
00H to 01H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 01H
00H to 01H
00H to 64H
00H to 64H
00H to 64H
FFH
Aspect Ratio
Screen Mute
Volume Mute
Volume Control
Contrast
g
h
i
Brightness
Color
Tint
j
10 Sharpness
k
l
11 OSD Select
12 Remote Lock/ key Lock
13 Treble
m
r
14 Bass
s
t
15 Audio Balance
16 Abnomal state
z
m
n
17 White Balance Red Gain
18 White Balance Green Gain
19 White Balance Blue Gain
00H to FEH
00H to FEH
j
j
j
o
p
q
u
c
i
00H to FEH
01H to 08H
00H to 05H
01H
20 ISM mode
21 Energy Saving
22 Auto configuration
23 Remocon Key
24 Fail Over Select
25 Fail Over Input Select
26 4 Hours Off
j
j
m
m
m
m
d
d
d
d
d
d
d
d
d
d
d
d
d
d
d
f
Key Code
00H to 02H
j
Refer ’25. Fail Over Input Select’
00H to 01H
FFH
n
z
d
e
f
27 Tile Mode Check
28 Tile Mode
00H to 55H
00H to 14H
00H to 14H
00H to 64H
00H to 64H
01H to 19H
00H to 01H
00H to 04H
00H to 05H
FFH
29 Tile H Position
30 Tile V Position
31 Tile H Size
g
h
i
32 Tile V Size
33 Tile ID Set
34 Natural Mode (In Tile mode)
35 Picture mode (PSM)
36 Sound mode
j
x
y
w
l
37 Fan Fault check
38 Elapsed time return
39 Temperature value
40 Lamp fault check
41 Speaker
FFH
n
p
v
f
FFH
FFH
00H to 01H
00H to 08H
42 Sleep Time
Download from Www.Somanuals.com. All Manuals Search And Download.
70 CONTROLLING THE MULTIPLE PRODUCT
COMMAND
DATA
43 Auto Sleep
44 Power On Delay
45 Language
46 DPM Select
47 Reset
f
f
f
f
f
g
h
i
00H to 01H
00H to 64H
00H to 12H
00H to 01H
00H to 03H
j
k
48 Power Indicator
f
f
o
y
z
a
x
e
d
u
q
r
00H to 01H
FFH
49 Serial no.
50 S / W Version
f
FFH
51 Time 1(Years/ Months/ Days)
52 Time 2(Hours/ Minutes/Seconds)
53 Off Timer(Repeat mode/ Time)
54 On Timer(Repeat Mode/ Time)
55 On Timer Input
f
Refer to ‘Time 1’
Refer to ‘Time 2’
Refer to ‘Off Timer’
Refer to ‘On Timer’
Refer to ‘On Timer Input’
00H to 64H
f
f
f
f
56 H Position
f
57 V Position
f
23H to 41H
58 H Size
f
s
b
u
00H to 64H
59 Input Select
x
x
20H to D0H
60 Color Temperature
00H to 64H
Note : When using the product with a USB DivX player, all commands except for Power (k a), Key (m c),
Abnormal state (k z), Fan Fault check (d w), Elapsed time return (d l), Temperature value (d n), Lamp
fault Check (d p), Serial no.Check (f y), and S/W Version (f z) are not executed and handled as errors.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 71
Transmission / Receiving protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product.
range : 01H to 63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack
message. Because all sets will send the ack message, so it's impossible the check the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return (ASCII code '0 x 0 D')
* [ ]: ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of
the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
Download from Www.Somanuals.com. All Manuals Search And Download.
72 CONTROLLING THE MULTIPLE PRODUCT
* Real data mapping
03. Screen Mute (Command: k d)
To select screen mute on / off.
Hexadecimal Num.
Decimal Num.
Transmission
(Setting Value)
(Real Value)
[k][d][ ][Set ID][ ][Data][Cr]
0
0
A
10
15
16
32
100
Data
F
00: Screen mute off (Picture on)
01 : Screen mute on (Picture off)
10
20
64
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
01. Power (Command: k a)
To control Power On/Off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
00 : Power Off
01 : Power On
04. Volume Mute (Command: k e)
To control On/Off of the Volume Mute.
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
To show the status of Power On/Off.
Data
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data
00 : Power Off
01 : Power On
Data
00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
02. Aspect Ratio (Command: k c)
To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in
the Screen menu.
05. Volume Control (Command: k f)
To adjust Volume.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Transmission
Data
[k][f][ ][Set ID][ ][Data][Cr]
01 : Normal Screen (4 : 3)
02 : Wide Scran (16 : 9)
04 : Zoom
(AV,Component,HDMI/Display Port DTV)
09 : Just Scan
(Component,HDMI/Display Port DTV)
* When the RGB, DVI-D, HDMI/ Display Port PC
mode (1:1)
Data
Min : 00H to Max : 64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
10 to 1F : Cinema Zoom 1 to 16
( AV, Component, HDMI/Display Port DTV)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 73
06. Contrast (Command: k g)
09. Tint (Command: k j)
To adjust screen contrast.
To adjust the screen tint.
You can also adjust the contrast in the Picture menu.
You can also adjust the tint in the Picture menu.
Transmission
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
[k][j][ ][Set ID][ ][Data][Cr]
Data
Data
Min : 00H to Max : 64H
Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step R50
64H : Step G50
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Data
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Min : 00H to Max : 64H
* Refer to 'Real data mapping ’.
Data Min : 00H to Max : 64H
* Tint Real data mapping
0 : Step 0 to Red
64 : Step 100 to Green
07. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust the brightness in the Picture
menu.
10. Sharpness (Command: k k) (Video input only)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’.
Data
Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
* Refer to 'Real data mapping ’.
Data
Min : 00H to Max : 64H
08. Color (Command: k i) (Video Timing only)
To adjust the screen color.
11. OSD Select (Command: k l)
To control OSD on/off to the set.
You can also adjust the color in the Picture menu.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Data
00: OSD Off
01: OSD On
Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’.
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
00: OSD Off
01: OSD On
Data
Min : 00H to Max : 64H
Download from Www.Somanuals.com. All Manuals Search And Download.
74 CONTROLLING THE MULTIPLE PRODUCT
12. Remote Lock /Key Lock (Command: k m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the
remote control and the local keys.
15. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step L50
64H : Step R50
Data
00: Off
01: On
Acknowledgement
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
[t][ ][Set ID][ ][OK][Data][x]
Data
Data
00: Off
01: On
Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step 0 to L50
64H : Step 100 to R50
* Balance : L50 to R50
13. Treble (Command: k r)
To adjust treble.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data
00~64: Treble 0~100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
16. Abnormal state (Command: k z)
Used to Read the power off status when Stand-by
mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data
FF : Read
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Data
00 : Normal (Power on and signal exist)
01 : No signal (Power on)
14. Bass (Command: k s)
To adjust bass.
02 : Turn the monitor off by remote control
03 : Turn the monitor off by sleep time function
04 : Turn the monitor off by RS-232C function
08 : Turn the monitor off by off time function
09 : Turn the monitor off by auto off function
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data
00~64: Bass 0~100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 75
17. White Balance Red Gain (Command: j m)
To adjust white balance red gain.
20. ISM mode (Command: j p)
Used to select the afterimage preventing function.
Transmission
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
[j][p][ ][Set ID][ ][Data][Cr]
Data
Data
00~FE: Red gain 0~254
01 : Inversion
02 : Orbiter
04 : White Wash
08 : Normal
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
18. White Balance Green Gain (Command: j n)
To adjust white balance green gain.
21. Energy Saving (Command: j q)
To reduce the power consumption of the Monitor.
Transmission
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
[j][q][ ][Set ID][ ][Data][Cr]
Data
Data
00~FE: Green gain 0~254
04: Auto
00: Off
Acknowledgement
01: Minimum
02: Medium
03: Maximum
05: Screen off
[n][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
19. White Balance Blue Gain (Command: j o)
To adjust white balance blue gain.
22. Auto Config. (Command: j u)
To adjust picture position and minimize image
shaking. Automatically. NB : Only applies to RGB(PC)
mode.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
00~FE: Blue gain 0~25
Data
01 : To set
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
76 CONTROLLING THE MULTIPLE PRODUCT
23. Key (Command: m c)
To send IR remote key code.
26. 4 Hours Off (Command: m n)
To set the 4 Hours Off function.
Transmission
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
[m][n][ ][Set ID][ ][Data][Cr]
Data
Data
Key code : Refer to ‘IR CODES’.
00: 4 Hours Off Off
01: 4 Hours Off On
Acknowledgement
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
[n][ ][Set ID][ ][OK/NG][Data][x]
24. Fail Over Select (Command: m i)
To select Fail Over mode.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
27. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
Acknowledgement
[d][z][ ][Set ID][ ][Data][Cr]
[i][ ][Set ID][ ][OK/NG][Data][x]
Data
FF: Check Tile Mode status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
00: Tile Mode Off
01: Tile Mode On
Data2
00 to 0F: Tile Col Value
Data3
00 to 0F: Tile Row Value
25. Fail Over Input Select (Command: m j)
To select fail over mode.
* Only available in Fail Over manual mode.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3]
[ ][Data4][Cr]
Data(Priority 1~4)
60: RGB
70: DVI-D
90: HDMI
C0: Display Port
* Use 0x70 as data for DVI-D input, 0x90 as data
for HDMI input, 0xC0 as data for DisplayPort input,
regardless their input labels.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 77
28. Tile Mode (Command: d d)
Change a Tile Mode.
31. Tile H Size (Command: d g)
To set the Horizontal size.
Transmission
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
[d][g][ ][Set ID][ ][Data][Cr]
Data
Data
Description
Min : 00H to Max : 64H
* Refer to 'Real data mapping ’.
00 or 11
12
Tile mode is off.
1 x 2 mode (column x row)
1 x 3 mode
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
13
14
1 x 4 mode
...
...
55
1 x 2 mode
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
29. Tile H Position (Command: d e)
To set the Horizontal position.
32. Tile V Size (Command: d h)
To set the Vertical size.
Transmission
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
[d][h][ ][Set ID][ ][Data][Cr]
Data
Data
Min : 00H to Max : 14H
00H : Step -10(Left)
14H : Step 10(Right)
Min : 00H to Max : 64H
* Refer to 'Real data mapping ’.
Acknowledgement
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
[e][ ][Set ID][ ][OK/NG][Data][x]
30. Tile V Position (Command: d f)
To set the Vertical position.
33. Tile ID Set (Command: d i)
To assign the Tile ID for Tiling function.
Transmission
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
[d][i][ ][Set ID][ ][Data][Cr]
Data
Data
Min : 00H to Max : 14H
00H : Step -10(Down)
14H : Step 10(Up)
Min : 01H to Max : 19H
(Hexadecimal code)
Acknowledgement
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
[f][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
78 CONTROLLING THE MULTIPLE PRODUCT
34. Natural Mode (Command: d j)
To assign the Tile Natural mode for Tiling function.
37. Fan Fault check (Command: d w)
To check the Fan fault of the Set.
Transmission
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
[d][w][ ][Set ID][ ][Data][Cr]
Data
* The data is always FF (in Hex).
00 : Natural Off
01 : Natural On
ff : Read Status
Data
ff : Read Status
Acknowledgement
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
[j][ ][Set ID][ ][OK/NG][Data][x]
* Data is the status value of the Fan fault.
Data
00 : Fan fault
01 : Fan Ok
02 : N/A (Not Avaliable)
35. Picture Mode (Command: d x)
To adjust the picture mode.
38. Elapsed time return (Command: d l)
To read the elapsed time.
Transmission
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
[d][l][ ][Set ID][ ][Data][Cr]
Data Structure
* The data is always FF(in Hex).
Acknowledgement
Data(Hex)
Mode
[l][ ][Set ID][ ][OK/NG][Data][x]
00
01
02
03
04
Vivid
Standard
Cinema
Sport
* The data is always FF(in Hex).
(Hexadecimal code)
Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
36. Sound Mode (Command: d y)
To adjust the Sound mode.
39. Temperature value (Command: d n)
To read the inside temperature value.
Transmission
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
[d][n][ ][Set ID][ ][Data][Cr]
Data Structure
* The data is always FF(in Hex).
Acknowledgement
Data(Hex)
Mode
[n][ ][Set ID][ ][OK/NG][Data][x]
01
02
03
04
05
Standard
Music
* The data is 1 byte long in Hexadecimal.
Cinema
Sport
Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 79
40. Lamp fault Check (Command: d p)
To check lamp fault.
43. Auto Sleep (Command: f g)
Set Auto Sleep.
Transmission
Transmission
[d][p][ ][Set ID][ ][Data][Cr]
[f][g][ ][Set ID][ ][Data][Cr]
* The data is always FF(in Hex).
Data
00 : Off
01 : On
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
Data
00 : Lamp Fault
01 : Lamp Ok
02 : N/A (DPM/Power Off)
41. Speaker (Command: d v)
Turn the speaker on or off.
44. Power On Delay (Command: f h)
Set the schedule delay when the power is turned on
(Unit: second).
Transmission
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
[f][h][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Data
00H to 64H (Data value)
* Refer to 'Real data mapping ’.
Acknowledgement
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
[h][ ][Set ID][ ][OK/NG][Data][x]
42. Sleep Time (Command: f f)
Set Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : 10
02 : 20
03 : 30
04 : 60
05 : 90
06 : 120
07 : 180
08 : 240
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
80 CONTROLLING THE MULTIPLE PRODUCT
45. Language (Command: f i)
Set the OSD language.
47. Reset (Command: f k)
Execute the Picture, Screen and Factory Reset
functions.
Transmission
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
[f][k][ ][Set ID][ ][Data][Cr]
Data
00 : Czech
Data
01 : Danish
00 : Picture Reset
02 : German
03 : English
(Reset the values set in the PICTURE menu.)
01 : Screen Reset
04 : Spanish (EU)
05 : Greek
(Reset the values set in under the Screen option.)
02 : Factory Reset
06 : French
07 : Italian
(Reset the values set in the OPTION menu.)
03 : Audio Reset
08 : Dutch
(Reset the values set in the AUDIO menu.)
09 : Norwegian
0a : Portuguese(EU)
0b : Portuguese(Brazil)
0c : Russian
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
0d : Finnish
0e : Swedish
0f : Korean
10 : Simplified Chinese
11 : Japanese
12 : Traditional Chinese
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
48. Power Indicator (Command: f o)
To set the LED for Power Indicator
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : On
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
46. DPM Select (Command: f j)
Set the DPM (Display Power Management) function.
49. Serial no.Check (Command: f y)
Check the Serial no.
Transmission
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
[f][y][ ][Set ID][ ][Data][Cr]
Data
Data
00 : Off
01 : On
FF (to read the serial numbers)
Acknowledgement
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]
[j][ ][Set ID][ ][OK/NG][Data][x]
* The data format is ASCII Code.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 81
50. S/W Version (Command: f z)
Check the software version.
52. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data
Data1
FFH : Read
00 to 17: 00 to 23 hours
Data2
00 to 3B: 00 to 59 minutes
Data3
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2 values.
** This command won’t work if Time 1 has not been
set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
51. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
53. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat mode/ Time) function.
Transmission
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 1
Data1
00 to 14: 2010 to 2030
00: Repeat Off
Data 2
01: Repeat Once
01 to 0C: January to December
Data 3
01 to 1F: 1 to 31
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2
* Enter “fa [Set ID] ff” for checking Time 1 values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
00 to 17: 00 to 23 Hours
Data3
00 to 3B: 00 to 59 Minutes
* Enter “fe [Set ID] ff” for checking Off Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
82 CONTROLLING THE MULTIPLE PRODUCT
54. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
56. H Position (Command: f q)
To set the Horizontal position.
* Only available for Tile Off mode.
Transmission
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[f][q][ ][Set ID][ ][Data][Cr]
Data1
00: Repeat Off
Data
01: Repeat Once
00~64: Left 50 ~ Right 50
02. Repeat Daily
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2
00 to 17: 00 to 23 Hours
Data3
00 to 3B: 00 to 59 Minutes
* Enter “fd [Set ID] ff” for checking On Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
57. V Position (Command: f r)
To set the Vertical position.
* Only available for Tile Off mode.
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
Data
23~41: Bottom 15~Top 15
55. On Timer Input (Command: f u)
To set the On Timer Input function.
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[f][u][ ][Set ID][ ][Data][Cr]
Data
20 : AV
40 : Component
60 : RGB
70 : DVI-D
90 : HDMI
C0 : Display Port
* Check if Time1 and Time2 and On Timer(Repeat
Mode/Time) functions have been set before setting
this function.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
58. H Size (Command: f s)
To set the Horizontal size.
* Only available for Tile Off mode.
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data
00~64: Size -50 ~ +50
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 83
59. Input Select (Command: x b)
To select input source for the Set.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: AV(CVBS)
40: Component
60: RGB(PC)
70: DVI-D
90: HDMI(DTV)
A0: HDMI(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
60. Color Temperature (Command: x u)
To adjust the screen color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data
00~64: Warm 50~Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to [email protected].
This offer is valid for three (3) years from the
date on which you purchased the product.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
Temporary noise is normal when powering ON or
OFF this device.
MODEL
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|