LG Electronics Cell Phone B2050 User Manual

ENGLISH  
User Guide  
B2050  
Please read this manual carefully before operating your mobile phone.  
Retain it for future reference.  
Issue 1.1  
Part No. MMBB0155004  
Printed in Korea  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disposal of your old appliance  
All electrical and electronic products should be  
disposed of separately from the municipal waste  
stream via designated collection facilities  
appointed by the government or the local  
authorities.  
When this crossed-out wheeled bin symbol is  
attached to a product it means the product is  
covered by the European Directive 2002/96/EC.  
B2050 User Guide  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Congratulations on your purchase of the advanced and  
compact B2050 mobile phone, designed to operate  
with the latest digital mobile communication  
technology.  
This user guide contains important information on  
the use and operation of this phone. Please read  
all the information carefully for optimal  
performance and to prevent any damage to or  
misuse of the phone. Any changes or modifications  
not expressly approved in this users guide could  
void your warranty for this equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
2
Guidelines for safe and efficient use  
Read these simple guidelines. Breaking the rules may  
be dangerous or illegal. Further detailed information is  
given in this manual.  
(ICNIRP), which is 2W/kg averaged over ten (10) gram  
of tissue.  
The highest SAR value for this model phone which  
tested by DASY4 for use at the ear is 1.10 W/kg (10g).  
Exposure to radio frequency energy  
• SAR data information for residents in  
Radio wave exposure and Specific Absorption Rate  
(SAR) information  
countries/regions that have adopted the SAR limit  
recommended by the Institute of Electrical and  
Electronics Engineers (IEEE), which is 1.6 W/kg  
averaged over one (1) gram of tissue (for example  
USA, Canada, Australia and Taiwan).  
This mobile phone model B2050 has been designed to  
comply with applicable safety requirement for  
exposure to radio waves. This requirement is based on  
scientific guidelines that include safety margins  
designed to assure this safety of all persons,  
regardless of age and health.  
Product care and maintenance  
Warning: Use only batteries, charger and accessories  
approved for use with this particular phone model.  
The use of any other types may invalidiate any approval  
or warranty applying to the phone, and may be  
dangerous.  
The radio wave exposure guidelines employ a unit of  
measurement known as the Specific Absorption Rate,  
or SAR. Tests for SAR are conducted using  
standardized method with the phone transmitting at  
its highest certified power level in all used frequency  
bands.  
Do not disassemble this unit. Take it to a qualified  
service technician when repair work is required.  
• While there may be differences between the SAR  
levels of various LG phone models, they are all  
designed to meet the relevant guidelines for  
exposure to radio waves.  
Keep away from electrical appliance such as a TV,  
radio or personal computer.  
The SAR limit recommended by the International  
Commission on Non-Ionizing Radiation Protection  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
3
Guidelines for safe and efficient use  
The unit should be kept away from heat sources such  
as radiators or cookers.  
Efficient phone operation  
To enjoy optimum performance with minimum power  
consumption please:  
Do not drop.  
Do not subject this unit to mechanical vibration or  
shock.  
Hold the phone as you speak to any other telephone.  
While speaking directly into the microphone, angle  
the antenna in a direction up and over your shoulder.  
If the antenna is extendable/retractable, it should be  
extended during a call.  
The coating of the phone may be damaged if covered  
with wrap or vinyl wrapper.  
Use dry cloth to clean the exterior of the unit. (Do not  
use solvent such as benzene, thinner or alcohol.)  
• If your mobile phone supports infrared, never direct  
the infrared ray at anyones eyes.  
Do not subject this unit to excessive smoke or dust.  
Do not keep the phone next to credit cards or  
transport tickets; it can affect the information on the  
magnetic strips.  
Electronics devices  
All wireless phones may get interference, which  
could affect performance.  
Do not tap the screen with a sharp object; otherwise,  
it may damage the phone.  
Do not use your mobile phone near medical equipment  
without requesting permission. Avoid placing the  
phone over the pacemaker, i.e. in your breast pocket.  
Do not expose the phone to liquid or moisture.  
Use the accessories like an earphone cautiously. Do  
not touch the antenna unnecessarily.  
• Some hearing aids might be disturbed by mobile  
phones.  
• Minor interference may affect TVs, radios, PCs, etc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
4
Guidelines for safe and efficient use  
Road safety  
Potentially explosive atmospheres  
Check the laws and regulations on the use of mobile  
phones in the areas when you drive.  
Do not use the phone at a refuelling point. Don't use  
near fuel or chemicals.  
Do not use a hand-held phone while driving.  
Give full attention to driving.  
Do not transport or store flammable gas, liquid, or  
explosives in the compartment of your vehicle, which  
contains your mobile phone and accessories.  
Use an handsfree kit, if available.  
In aircraft  
• Pull off the road and park before making and  
answering a call if driving conditions so require.  
Wireless devices can cause interference in aircraft.  
RF energy may affect some electonic system in your  
motor vehicle such as car stereo, safety equipment.  
Turn off your mobile phone before boarding any  
aircraft.  
• When your vehicle is equipped with an air bag, do not  
obstruct with objects including either installed or  
portable wireless equipment. It can cause serious  
injury due to improper performance.  
On the ground, follow airline instructions regarding  
use of mobile phones.  
Children  
Blasting area  
Keep the phone in a safe place out of childrens reach.  
It includes small parts which if detached may cause a  
choking hazard.  
Do not use the phone where blasting is in progress.  
Observe restrictions, and follow any regulations or  
rules.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
5
Guidelines for safe and efficient use  
Do not leave the battery in hot or cold places, this  
may deteriorate the battery performance.  
Emergency calls  
Emergency call may not be available under all cellular  
networks. Therefore, you should never depend solely  
on the phone for emergency calls. Check with your  
local service provider.  
Dispose of used batteries in accordance with local  
legislation.  
Battery information and care  
You do not need to completely discharge the battery  
before recharging. Unlike other battery systems,  
there is no memory effect that could compromise the  
batterys performance.  
Use only LG batteries and chargers. LG chargers are  
designed to maximize the battery life.  
Do not disassemble or short-circuit the battery pack.  
Keep the metal contacts of the battery pack clean.  
Replace the battery when it no longer provides  
acceptable performance. The battery pack may be  
recharged hundreds of times until it needs replacing.  
Recharge the battery if it has not been used for a long  
time to maximize usability.  
Do not expose the battery charger to direct sunlight  
or use it in high humidity, such as the bathroom.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
6
B2050 User Guide  
s
C
o
n
t
e
n
t
Turning your phone on and off ...................................... 18  
Turning your phone ON ............................................................. 18  
Turning your phone OFF ............................................................ 18  
Overview  
Parts of the Phone ........................................................... 10  
Front view .................................................................................... 10  
Rear view .................................................................................... 11  
Additional Functions  
Key Description ............................................................... 12  
Access codes ................................................................... 19  
• PIN code (4 to 8 digits) ............................................................... 19  
• PIN2 code (4 to 8 digits) ............................................................. 19  
• PUK code (4 to 8 digits) .............................................................. 19  
• PUK2 code (4 to 8 digits) ............................................................ 19  
• Security code (4 to 8 digits) ...................................................... 19  
• Network password ..................................................................... 19  
Keypad Description .................................................................... 12  
Display Information  
Display Information ......................................................... 14  
On-Screen Icons ......................................................................... 14  
Getting Started  
Installation ........................................................................ 15  
• Inserting the SIM Card .............................................................. 15  
Removing the SIM Card ............................................................. 15  
• Installing the Battery .................................................................. 15  
Charging the Battery .................................................................. 16  
Disconnecting the charger ....................................................... 17  
General functions ............................................................ 20  
• Making and answering calls .................................................... 20  
• Phonebook ................................................................................... 24  
• In call menu ................................................................................. 24  
• Multiparty or conference calls ................................................. 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
7
Profiles [Menu-3] ............................................................. 44  
Changing the profile [Menu 3-x-1] ........................................... 44  
Customising profiles - Personalise [Menu 3-x-2] .................. 44  
Customising profiles - Rename [Menu 3-x-3] ........................ 45  
Accessing the Menu  
Menu Tree ......................................................................... 27  
Selecting functions and options ................................... 29  
Messages [Menu-1 ] ....................................................... 30  
• Write text message [Menu-1-1] ............................................... 30  
• Write multimedia messages [Menu-1-2] ................................ 31  
• Inbox [Menu-1-3] ........................................................................ 33  
Outbox [Menu-1-4] ..................................................................... 34  
Drafts [Menu-1-5] ....................................................................... 35  
Listen to voice mail [Menu-1-6] ................................................ 35  
• Info message [Menu-1-7] .......................................................... 36  
Templates [Menu-1-8] ............................................................... 36  
• Settings [Menu-1-9] ................................................................... 38  
Settings [Menu-4] ............................................................ 46  
Date & Time [Menu-4-1] ............................................................ 46  
• Phone settings [Menu-4-2] ....................................................... 46  
Call settings [Menu-4-3] ............................................................ 47  
• Security settings [Menu-4-4] .................................................... 49  
• Network settings [Menu-4-5] ................................................... 52  
GPRS setting [Menu-4-6] ........................................................... 53  
Reset settings [Menu-4-7] ......................................................... 53  
Organiser [Menu-5] ......................................................... 54  
Alarm clock [Menu-5-1] ............................................................. 54  
• Scheduler [Menu-5-2] ................................................................ 54  
• Phonebook [Menu-5-3] .............................................................. 55  
Call register [Menu-2] .................................................... 41  
• Missed calls [Menu-2-1] ........................................................... 41  
Received calls [Menu-2-2] ........................................................ 41  
Dialled calls [Menu-2-3] ............................................................ 41  
Delete recent calls [Menu-2-4] ................................................ 42  
Call charges [Menu-2-5] ............................................................ 42  
GPRS information [Menu-2-6] .................................................. 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
8
Tools [Menu-6] ................................................................. 59  
Favorites [Menu-6-1] .................................................................. 59  
Calculator [Menu-6-2] ................................................................ 59  
• My folder [Menu-6-3] ................................................................. 60  
Unit converter [Menu-6-4] ........................................................ 60  
• World time [Menu-6-5] .............................................................. 60  
Voice recorder [Menu-6-6] ....................................................... 61  
• Memory status [Menu-6-7] ....................................................... 61  
Games [Menu-8] .............................................................. 67  
Accessories ...................................................................... 68  
Technical Data ................................................................. 69  
Internet [Menu-7] ............................................................. 62  
Home [Menu-7-1] ........................................................................ 62  
• Bookmarks [Menu-7-2] .............................................................. 62  
• Profiles [Menu-7-3] .................................................................... 63  
Go to URL [Menu-7-4] ................................................................ 65  
Cache settings [Menu-7-5] ....................................................... 65  
Cookies settings [Menu-7-6] ..................................................... 66  
• Security certification [Menu-7-7] ............................................ 66  
Reset profiles [Menu-7-8] ......................................................... 66  
• Browser version [Menu-7-9] .................................................... 66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
9
Parts of the Phone  
Front view  
Earpiece  
Display Screen  
Message key  
Headset jack  
Favorites key  
Profile Key  
Soft Left key  
Soft Right key  
End/Power key  
Clear/Cancel key  
Send key  
Phone book list key  
Numeric keys  
Star key  
Hash key  
Microphone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
10  
Parts of the Phone  
Rear view  
Handstrap Hole  
SIM Card Socket  
Battery Terminals  
Battery cover  
Cable Connector / Battery Charging Connector /  
Hands-Free Car kit Connector  
Battery  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
11  
Key Description  
The following shows key components of the phone.  
Key  
Description  
Send Key  
Keypad Description  
You can dial a phone number and  
answer a call. If you press this key  
without entering a number, your phone  
shows the most recently dialled,  
received and missed numbers.  
Key  
Description  
Soft Left Key / Soft Right Key  
Each of these keys performs the  
function indicated by the text on the  
display immediately above it.  
Numeric Keys  
These keys are used mainly to dial in  
standby mode and enter numbers or  
characters in editing mode. When you  
press these keys for a long time.  
Navigation Keys  
Use to scroll through menus and move  
the cursor. You can also use these keys  
for quick access to the following  
functions.  
Used to call your voicemail box by  
.
Up navigation key (  
A shortcut key to the Favorites menu.  
Down navigation key ( ) :  
A shortcut key to the Phonebook.  
) :  
Used to call for international call by  
.
Used to call Speed dials by from  
to  
.
Left navigation key (  
Profiles menu.  
):  
END/PWR Key  
Used to end or reject a call. This key is  
also used as Power Key by pressing  
this key for a few seconds.  
Right navigation key ( ) :  
(Short press) Accesses the Write text  
message menu.  
(Long press) Accesses the message  
inbox.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
12  
Key Description  
Key  
Description  
You can delete the characters, go back  
to the menu. In addition, you can view  
voice memo list when you press this  
key shortly in standby mode. Long press  
of this key in standby mode starts voice  
memo recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
13  
Display Information  
The table below describes various display indicators  
or icons that appear on the phones display screen.  
Icon/Indicator  
Description  
Indicates the Headset profile is activated.  
Indicates the Car profile is activated.  
Indicates a call is diverted.  
On-Screen Icons  
Icon/Indicator  
Description  
Indicates the strength of the network  
signal.  
Indicates a call is in progress.  
Indicates that GPRS service is available.  
Indicates that you are roaming on  
another network.  
Indicates the alarm has been set and is on.  
Indicates the status of the battery charge.  
Indicates the receipt of a message.  
Indicates the receipt of a voice mail.  
You have received a push message.  
Indicates that Vibrate profile has been  
set.  
Indicates the General profile is activated.  
Indicates the Loud profile is activated.  
Indicates the Quiet profile is activated.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
14  
Installation  
Follow the steps below to Remove the SIM card.  
1. Remove the battery if attached.  
2. Take out the SIM card from the slot.  
Notice  
1. Inserting the SIM Card  
Removing the battery from the phone whilst it is  
switched on may cause it to malfunction.  
The metal contact of the SIM card can be easily  
damaged by scratches. Pay special attention to  
the SIM card when you handle and install. Follow  
the instructions supplied with the SIM card.  
Locate the SIM card socket in the back of the phone.  
Follow the steps below to install the SIM card.  
1. Remove the battery if attached.  
3. Installing the Battery  
2. Slide the SIM card into the slot, under the silvery  
holders, with the golden connectors facing down.  
2. Removing the SIM Card  
1. Position the lugs on the bottom of the battery into the  
retaining holder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
15  
Installation  
4. Charging the Battery  
To connect the travel adapter to the phone, you must  
have installed the battery.  
2. Then push down the half of the battery into position.  
1. With the arrow facing you as shown in the diagram  
push the plug on the battery adapter into the socket  
on the bottom of the phone until it clicks into place.  
3. Lay the battery cover in place of the phone and slide  
it until the latch clicks.  
2. Connect the other end of the travel adapter to the  
mains socket. Only use the LG approved charger  
provided in the box.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
16  
Installation  
Warning  
Note  
Do not force the connector as this may damage  
the phone and/or the travel adapter.  
Ensure the battery is fully charged before using  
the phone.  
Do not remove your battery or the SIM card while  
charging.  
Note  
• “Battery Charging” is displayed on the screen  
after connecting the travel adapter. Only if the  
battery is totally empty, Call indicator Light is on  
without displaying “Battery Charging”.  
The moving bars of battery icon will stop after  
charging is complete.  
Note  
If the battery does not charge,  
• switch the phone off.  
5. Disconnecting the charger  
• ensure the battery is correctly fit.  
Disconnect the travel adapter from the phone by  
pressing its side buttons as shown in the diagram.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
17  
Turning your phone on and off  
Turning your phone ON  
1. Install a battery to the handset and connect the  
phone to an external power source such as the  
travel adapter, cigarette lighter adapter or hands-  
free car kit. Or install a charged battery pack to the  
handset.  
2. Press  
is turned on.  
for a few seconds until the LCD screen  
3. Depending on the status of the PIN code request  
setting you may need to enter your PIN code.  
Turning your phone OFF  
1. Press  
is turned off.  
for a few seconds until the LCD screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
18  
Access codes  
You can use the access codes described in this  
section to avoid unauthorised use of your phone. The  
access codes (except PUK and PUK2 codes) can be  
changed by using the Change codes feature  
[Menu-4-4-6]. See page 52.  
network operator for the code. If you lose the code,  
also contact your network operator.  
PUK2 code (4 to 8 digits)  
The PUK2 code, supplied with some SIM cards, is  
required to change a blocked PIN2 code. If you lose  
the code, also contact your network operator.  
PIN code (4 to 8 digits)  
The PIN (Personal Identification Number) code  
Security code (4 to 8 digits)  
protects your SIM card against unauthorised use. The  
PIN code is usually supplied with the SIM card. When  
the PIN code request is set to On, your phone will  
request the PIN code every time the phone is switched  
on. When the PIN code request is set to Off, your phone  
connects to the network directly without the PIN code.  
The security code protects the unauthorised use of  
your phone. The default security code is set to 0000’  
and the security code is required to delete all phone  
entries and to activate the Reset Settings menu. Also,  
the security code is required to enable or disable the  
phone lock function to prevent unauthorised use of the  
phone. The security code default setting can be  
modified from the Security Settings menu.  
PIN2 code (4 to 8 digits)  
The PIN2 code, supplied with some SIM cards, is  
required to access functions such as Advice of Call  
Charge and Fixed Dial Number. These functions are  
only available if supported by your SIM card.  
Network password  
The Network password is required when you use the  
Call Barring function. You obtain the password from  
your network operator when you subscribe to this  
function. See page 50 for further details.  
PUK code (4 to 8 digits)  
The PUK (PIN Unblocking Key) code is required to  
change a blocked PIN code. The PUK code may be  
supplied with the SIM card. If not, contact your  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
19  
General functions  
2. Enter the country code, area code, and the phone  
number.  
Making and answering calls  
Making a call  
3. Press  
.
1. Make sure your phone is switched on.  
Ending a call  
2. Enter a phone number, including the area code.  
When you entered a wrong number, press the clear  
When you have finished your call, press the end (  
key.  
)
key (  
) to erase one digit at a time.  
Making a call from the phonebook  
Press and hold the clear key (  
digits in succession.  
) to erase the  
You can save the names and phone numbers dialled  
regularly in the SIM card and/or phone memory, which  
is called phonebook.  
3. Press the send key (  
) to call the number.  
4. To end the call, press the end key (  
).  
You can dial a number by simply looking up the desired  
name in the phonebook. For further details on the  
phonebook feature, please refer to page 55 through 58.  
Making a call using the send key  
1. In standby mode, press the send key (  
the latest incoming, outgoing and  
missed phone numbers will be displayed.  
), and  
Answering a call  
When you receive a call, the phone rings. If the caller  
can be identified, the callers phone number (or name  
if saved in the phonebook) is displayed.  
2. Select the desired number by using the up/down  
navigation key.  
3. Press  
.
1. To answer an incoming call, press the send key.  
Alternatively, please see page 48 for other answer  
modes.  
Making an international call  
1. Press and hold the  
key for the international  
prefix. The +’ character automatically selects the  
international access code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
20  
General functions  
greeting or scheduling events in the calendar all  
require entering text.  
Note  
• If Press any key has been set as the answer  
mode (see page 48), any key press will answer a  
The following text input methods are available in the  
phone.  
call except for the  
or the right soft key.  
T9 mode  
] You can answer a call while using the  
This mode lets you enter words with only one  
keystroke per letter. Each key on the keypad has  
more than one letter. The T9 mode automatically  
compares your keystrokes with an internal  
dictionary to determine the correct word, thus  
requiring far fewer keystrokes than the traditional  
ABC mode. This is sometimes known as predictive  
text.  
phonebook or other menu features.  
2. To end the call, press the  
key.  
Switching quickly to Vibrate only mode  
You can switch your phone quickly to the Vibrate only  
mode by pressing and holding down the left navigation  
key (  
). To go back to the previous profile, press  
and hold down the left navigation key (  
) again.  
ABC mode  
This mode lets you enter letters by pressing the key  
labelled with the required letter once, twice, three  
or four times until the letter is displayed.  
Signal strength  
You can check the strength of your signal by the signal  
indicator ( ) on the LCD screen of your phone.  
123 mode (Number mode)  
Signal strength can vary, particularly inside buildings.  
Moving near to a window may improve reception.  
Type numbers using one keystroke per number. To  
change to 123 mode in a text entry field, press the  
key until 123 mode is displayed.  
Entering text  
You can enter alphanumeric characters by using the  
phones keypad. For example, storing names in the  
Phonebook, writing a message, creating a personal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
21  
General functions  
1. When you are in the T9 predictive text input mode,  
Changing the text input mode  
start entering a word by pressing keys  
. Press one key per letter.  
to  
1. When you are in a field that allows characters to be  
entered, you will notice the text input mode indicator  
in the upper right corner of the LCD screen.  
- The word changes as letters are typed. Ignore  
whats on the screen until the word is typed  
completely.  
- You can select the language of the T9 mode. Press  
the left soft key [Options], then select T9 languages.  
You can also go to T9 languages menu by holding  
- If the word is still incorrect after typing completely,  
press the up/down navigation key once or more to  
cycle through the other word options.  
down the  
key. Select the desired language of  
T9 mode. You can also turn off the T9 mode by  
selecting T9 off. The default setting on the phone is  
T9 enabled mode.  
Example: Press  
to type Good  
Press  
[Down  
navigation key] to type Home  
Text input  
mode  
2. Change the text input mode by  
pressing . You can check  
the current text input mode in  
the upper right corner of the  
LCD screen.  
- If the desired word is missing from the word choice  
list, add it using the ABC mode.  
2. Enter the whole word before editing or deleting any  
keystrokes.  
3. Complete each word with a space by pressing the  
] Using the T9 mode  
key. To delete letters, press the  
key.  
The T9 predictive text input mode lets you enter words  
easily with a minimum number of key presses. As you  
press each key, the phone begins to display the  
characters that it thinks you are typing based on the  
built-in dictionary. You can also add new words in the  
dictionary. As new words are added, the word changes  
to reflect the most likely candidate from the dictionary.  
To delete letters, press the  
key. Press and hold  
down the  
key to erase entire words in succession.  
Notice  
To exit from the text input mode without saving  
your input, press  
standby mode.  
. The phone goes back to  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
22  
General functions  
] Using the ABC mode  
Notice  
Refer to the table below for more information on  
the characters available using the alphanumeric  
keys.  
Use the  
to  
keys to enter your text.  
1. Press the key labelled with the required letter:  
- Once for the first letter  
Characters in the order display  
- Twice for the second letter  
- And so on  
Key  
Upper case  
. , / ? ! - : ' '' 1  
Lower case  
. , / ? ! - : ' '' 1  
2. To insert a space, press the  
key once. To  
delete letters, press the  
key. Press and hold  
A B C 2 Ä À Á Â Ã Å Æ Ç a b c 2 ä à á â ã å æ ç  
D E F 3 Ë È É Ê d e f 3 ë è é ê  
down the  
key to erase the entire words in  
succession.  
G H I 4 Ï Ì Í Î  
J K L 5  
˝
g h i 4 ï ì í î  
j k l 5  
©
M N O 6 Ñ Ö Ø Ò Ó Ô Õ Œ m n o 6 ñ ö ø ò ó ô õ œ  
P Q R S 7 ß p q r s 7 ß  
Í
ß
T U V 8 Ü Ù Ú Û  
W X Y Z 9  
t u v 8 ü ù ú û  
w x y z 9  
Space key, 0  
Space key, 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
23  
General functions  
Using the 123(Number) mode  
standby mode, and the options are described below.  
Making a second call  
The 123 mode enables you to enter numbers in a text  
message (a telephone number, for example).  
Press the keys corresponding to the required digits  
before manually switching back to the appropriate text  
entry mode.  
You can get a number you wish to dial from the  
phonebook to make a second call. Press the right soft  
key then select Search. To save the dialled number  
into the phonebook during a call, press the right soft  
key then select Add new.  
Phonebook  
Switching between two calls  
You can save phone numbers and their corresponding  
names in the memory of your SIM card.  
To switch between two calls, press the left soft key  
[Options], then select Swap or just press the  
You can select one of two calls using  
key.  
In addition, you can save up to 200 numbers and  
names in the phone memory.  
up/down navigation keys. To end a call, highlight the  
phone number using up/down navigation keys then  
The SIM card and phone are both used in the same  
way in the Phonebook menu.  
press the  
key.  
Answering an incoming call  
(Refer to page 55 through 58 for details.)  
To answer an incoming call when the handset is  
In call menu  
ringing, simply press the  
key. The handset is also  
able to warn you of an incoming call while you are  
already on a call. A tone sounds in the earpiece, and  
the display will show that a second call is waiting. This  
feature, known as Call waiting, is only available if your  
network supports it. For details of how to activate and  
deactivate it see Call waiting on page 48.  
Your phone provides a number of control functions that  
you can use during a call. To access these functions  
during a call, press the left soft key [Options].  
During a call  
The menu displayed on the handset screen during a call  
is different to the default main menu displayed when in  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
24  
General functions  
If Call waiting is activated, you can put the first call on  
Multiparty or conference calls  
hold and answer the second, by pressing  
or by  
The multiparty or conference service provides you  
with the ability to have a simultaneous conversation  
with more than one caller, if your network operator  
supports this feature. A multiparty call can only be set  
up when you have one active call and one call on hold,  
both calls having been answered. Once a multiparty  
call is set up, calls can be added, disconnected or  
separated (that is, removed from the multiparty call but  
still connected to you) by the person who set up the  
multiparty call. These options are all available from the  
In-Call menu. The maximum callers in a multiparty call  
are five. Once started, you are in control of the  
multiparty call, and only you can add callers to the  
multiparty call.  
selecting left soft key, then Hold & Answer. You can  
end the current call and answer the waiting call by  
selecting left soft key and then End & Answer.  
Rejecting an incoming call  
You can reject an incoming call without answering by  
simply pressing the  
key.  
During a call, you can reject an incoming call by  
pressing the left soft key [Menu] and selecting the  
Multiparty/Reject or by pressing the  
key.  
Muting the microphone  
You can mute the microphone during a call by pressing  
the left soft key [Options], then selecting Mute. When  
the handset is muted, the caller cannot hear you, but  
you can still hear them. The handset can be unmuted  
by pressing the [Unmute].  
Making a second call  
You can make a second call while currently on a call.  
Enter the phone number and press the  
key. When  
Switching DTMF tones on during a call  
the second call is connected, the first call is  
automatically placed on hold. You can swap between  
two calls by pressing the left soft key then selecting  
Swap.  
To turn DTMF tones on during a call, press the left soft  
key, and then select DTMF on. DTMF tones can be  
turned off the same way. DTMF tones allow your  
phone to make use of an automated switchboard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
25  
General functions  
Setting up a multiparty call  
Having a private call during a multiparty call  
To have a private call with one caller from a multiparty  
call, display the number of the caller you wish to talk to  
on the screen, then press the left soft key. Select  
Multiparty/Private to put all the other callers on hold.  
Place one call on hold and while the active call is on,  
press the leftsoft key and then select Multiparty/Join  
all.  
Putting a multiparty call on hold  
Ending a multiparty call  
Press the left soft key, then select Multiparty/Hold all.  
Activate the multiparty call on hold  
The currently displayed caller from a multiparty call  
can be disconnected by pressing the  
key. To end  
Press the left soft key, then select Multiparty/Join all.  
Adding calls to the multiparty call  
a multiparty call, press the left soft key, then select  
Multiparty/End multiparty. After pressing the left soft  
key, selecting Multiparty/End all will end all the active  
and on-hold calls.  
To add a call to an existing multiparty call, press the  
left soft key, then select Multiparty/Join all.  
Putting a member of a multiparty call on hold  
To place one selected caller (whose number is  
currently displayed on the screen) of a multiparty call  
on hold, press the left soft key, then select  
Multiparty/Exclude.  
Displaying callers in a multiparty call  
Using up/down navigation keys, you can scroll through  
the phone numbers of the callers in a multiparty call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
26  
Menu Tree  
1 Messages  
3 Profiles  
General  
Loud  
1 Write text message  
2 Write multimedia message  
3 Inbox  
Headset  
Car  
4 Outbox  
5 Drafts  
Vibrate only  
Quiet  
6 Listen to voice mail  
7 Info message  
8 Templates  
9 Settings  
4 Settings  
1 Date & Time  
2 Phone settings  
3 Call settings  
2 Call register  
1 Missed calls  
4 Security settings  
5 Network settings  
6 GPRS setting  
7 Reset settings  
2 Received calls  
3 Dialled calls  
4 Delete recent calls  
5 Call charges  
6 GPRS information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
27  
Menu Tree  
5 Organiser  
1 Alarm clock  
2 Scheduler  
3 Phonebook  
7 Internet  
1 Home  
2 Bookmarks  
3 Profiles  
4 Go to URL  
5 Cache settings  
6 Cookies settings  
7 Security certification  
8 Reset profiles  
9 Browser version  
6 Tools  
1 Favorites  
2 Calculator  
3 My folder  
4 Unit converter  
5 World time  
6 Voice recorder  
7 Memory status  
8 Games  
9 SIM Service  
This menu depends on SIM and the network services.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
28  
Selecting functions and options  
Your phone offers a range of functions that allow you  
to customise it. These functions are arranged in menus  
and sub-menus, accessed via the two soft keys  
marked  
and  
. Each menu and sub-menu lets  
you view and alter the settings of a particular function.  
The roles of the soft keys vary according to the current  
context; the label on the bottom line of the screen just  
above each key indicates its current function.  
(e.g.)  
Menu  
Names  
Press the right soft  
key to activate the  
corresponding action.  
Press the left soft key  
to access the  
available menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
29  
Messages [Menu-1]  
Press the menu key ( ) and select Messages using  
]Send: Enter the phone number. Or select the  
number from the recent numbers or the Contacts  
after pressing the left soft key [Options].  
You can send a message up to 6 phone numbers  
at a time. Before sending the message, you can  
set the following options by pressing the right soft  
key [Settings].  
navigation keys.  
Write text message [Menu-1-1]  
Your phone receives voice mail notification messages,  
and Short Message Service (SMS) messages. Voice  
mail and SMS are network services. Please contact  
your network operator for more information.  
1) Validity period: Set the length of time for which  
your text messages will be saved at the SMS  
center while attempts are made to deliver them  
to the recipient. Possible values are 1 hour, 12  
hours, 1 day, 1 week and the maximum  
When the  
mail. When the  
icon appears, you have received voice  
icon appears, you have received  
a new text message. If the message memory is full, a  
message is displayed, the icon flashes and you  
authorized by your network operator.  
cannot receive any new messages. Use the Delete  
option in the Inbox menu to delete obsolete messages.  
Once there is space in the message memory, any  
undelivered SMS messages will be received (provided  
sufficient space is available).  
2) Delivery report: Select whether activate or  
deactivate the report function. When this  
function is activated, the network informs you  
whether your message has been delivered or  
not.  
1. Key in your message. For details on how to enter  
text, refer to pages 21 through 24 (Entering Text).  
3) Reply charging: Allows the recipients of your  
text message to send you a reply via your  
message centre, if the service is provided by  
the network.  
2. After you complete the message, to select the  
required option, press the left soft key [Options]. The  
following options are available.  
]Save: Saves the message so that it can be sent  
later.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
30  
Messages [Menu-1]  
]Font: Select the desired font size and style for the  
message using the left/right navigation keys.  
and they can be replaced with new ones received  
from other sources.  
]Colour: Select the desired foreground colour  
using the left/right navigation key. Then, press the  
down navigation key and select the background  
colour using the left/right navigation key.  
]Sound: If available, you can attach a sound to a  
short message.  
]Text templates: You can select a text template  
already set in the phone.  
]Alignment: Select where to align text.  
]Phonebook: You can add phone numbers to the  
]Add T9 dictionary: When you didn't find a desired  
word in the T9 text input mode, you can add a  
word using this option in the T9 dictionary. After  
typing a word, press the left soft key [Save].  
message.  
]Signature: You can attach your name card.  
Write multimedia messages [Menu-1-2]  
]T9 languages: Select the language for T9 input  
mode. You can also deactivate T9 input mode by  
selecting T9 off. For further details on the T9  
mode, refer to page 21 through 22.  
A multimedia message can contain text, images,  
and/or sound clips. This feature can be used only if it is  
supported by your network operator or service  
provider. Only the devices that offer compatible  
multimedia message or e-mail features can receive  
and send multimedia messages.  
]Exit: Exits from the Write text message menu.  
3. You can also send attachments with the message by  
pressing the right soft key [Insert], while youre  
entering a message.  
You can create a multimedia message up to 10 slides.  
(approximately 100 KB)  
1. After entering the subject of the message, press  
]Symbol: You can attach special characters.  
key.  
]Picture: Sends and receives text messages that  
contain pictures, known as picture messages.  
Several preset pictures are available in the phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
31  
Messages [Menu-1]  
2. Key in the text message. Using the right soft key  
[Insert], you can insert a symbol, a picture, a sound,  
a voice memo, text templates, phone numbers stored  
in the phonebook or a signature.  
3) Press the left soft key [Send].  
]Preview: Select this option to check out the  
multimedia message you've created. Each slide is  
sequentially played back automatically. You can  
also move to another slide from the currently  
played slide using the left/right navigation keys. To  
replay the message, press the left soft key [Replay].  
3. Press the left soft key [Options]. The following  
options are available.  
]Send: You can send the multimedia message up to  
6 recipients at the same time.  
]Save: Saves the message in drafts or as a  
template.  
1) Key in the phone number. You can also search  
the phone number from the recent number list  
or the phonebook using the left soft key  
[Options].  
]Add slide: Add a slide before or after the current  
slide.  
]Move to slide: Select this option to move to  
2) Press the right soft key [Settings]. You can set  
the following options:  
another slide from the current slide.  
]Delete slide: Deletes the current slide.  
- Priority: Set the priority of the MMS.  
]Set slide format: You can set the following slide  
- Validity period: Set the duration for keeping  
the multimedia messages on the network  
server. Possible values are 1 hour, 12 hours, 1  
day, 1 week and the maximum authorized by  
the network operator.  
format.  
- Set timer  
Enter the timer in each field using the numeric  
keypad.  
]Add T9 dictionary: When you didnt find a desired  
word in the T9 text input mode, you can add a  
word in the T9 dictionary using this option. After  
typing a word, press the left soft key [Save].  
- Delivery report: Select Yes to activate the  
report function. When this function is activated,  
the network informs you whether or not your  
message has been delivered.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
32  
Messages [Menu-1]  
]T9 languages: Select the T9 language for T9 input  
mode. You can also deactivate the T9 input mode by  
selecting T9 off. For further details on the T9 mode,  
refer to page 21 through 22.  
]View: You can view the selected message.  
]Reply: You can reply to the sender with a text  
message or a multimedia message.  
]Forward: You can forward the selected message  
to other recipients.  
]Exit: Exits from the Write multimedia message  
menu.  
]Return call: You can call back to the sender.  
Inbox [Menu-1-3 ]  
]Delete: Deletes the selected message from inbox.  
You will be alerted when you have received messages.  
And they will be stored in the Inbox.  
Press the left soft key [Menu] and select Messages  
Inbox. Or, you can take a shortcut by pressing the right  
navigation key ( ) in standby mode.  
]Extract: You can extract picture, sound, senders  
number, URL, email address and so on from the  
message. They will be saved in My folder,  
Phonebook, or Bookmarks.  
]View information: You can view the information of  
the message:  
In the Inbox, you can identify each message by icons.  
For detail, see the icon description below.  
the sender's address, subject (only for multimedia  
message), the date and time when the message  
has arrived, message type and size, and the  
priority (only for multimedia message).  
Icon  
Description  
Multimedia message  
Short message  
SIM message  
]Replay: You can replay the selected multimedia  
message. (Only for multimedia message)  
Read  
Notified multimedia message  
]Delete all: Deletes all the messages in the inbox  
folder.  
Each received message has the following options  
available. Press the left soft key [Options].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
33  
Messages [Menu-1 ]  
]Receive: When you receive a multimedia  
notification message, you need to select this  
option to download the multimedia message. (Only  
for multimedia notification message)  
The messages of which transmission was  
completed has the following options.  
]View: You can view the selected message.  
]Forward: You can forward the selected message to  
other recipients.  
]Cancel: You can cancel downloading the  
multimedia message. (Only for multimedia  
notification message)  
]Delete: Deletes the selected message from outbox.  
]View information: You can view the information of  
selected message: subject (only for multimedia  
message), the date and time when you sent it,  
message type and size, the priority (only for  
multimedia message), and recipients.  
Outbox [Menu-1-4 ]  
All the messages you have sent are stored in the  
Outbox folder. You can view the list and contents of  
messages. In the outbox message list, you can verify if  
the transmission was successful. If the transmission  
was failed, “(Failed)” is displayed before the recipient.  
You can also check whether you have received the  
delivery report through the following icons.  
]Delete all: Deletes all the messages in the outbox  
folder.  
The messages of which transmission is in  
progress has the following options.  
Icon  
Description  
Sent  
]View: You can view the selected message.  
]Send: Select this to send it again.  
Failed  
]Cancel: Cancels transmitting of the message.  
Delivery confirmed  
SMS sent  
]Delete: Cancels transmitting the message and  
deletes the message.  
In each message, the following options are available by  
pressing the left soft key [Options].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
34  
Messages [Menu-1 ]  
]View information: You can view the information of  
selected message: subject (only for multimedia  
message), the date and time when you sent it,  
message type and size, the priority (only for  
multimedia message), and recipients.  
]View: You can view the selected message.  
]Edit: You can edit the selected message.  
]Send: Sends the message.  
]Delete: Deletes the selected message from the  
drafts folder.  
]Send all: Sends all the messages of which  
transmission is in progress again.  
]View information: You can view the information of  
selected message: subject (only for multimedia  
message), the date and time when saved, message  
type and size and the priority (only for multimedia  
message).  
]Cancel all: Cancels all the message transmission.  
]Delete all: Cancels all the message transmission  
and deletes all of them.  
]Delete all: Deletes all the messages from drafts  
folder.  
Drafts [Menu-1-5 ]  
You can view the messages saved as a draft. The draft  
messages are listed with the date and time when they  
were saved. Scroll through the list using up/down  
navigation keys.  
Listen to voice mail [Menu-1-6 ]  
This menu provides you with a quick way of accessing  
your voice mailbox (if provided by your network).  
Before using this feature, you must enter the voice  
centre number obtained from your network operator.  
Icon  
Description  
Multimedia message  
Text message  
When new voice message is received, the  
symbol will be displayed on the screen. Please check  
with your network provider for details of their service  
in order to configure the handset correctly.  
Each draft has the following options. Press the left soft  
key [Options].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
35  
Messages [Menu-1 ]  
View list  
Info message (Network dependent) [Menu-1-7 ]  
You can view the list of all the info service message  
numbers. Press the left soft key [Options] to edit or  
delete the info message category.  
Info service messages are text messages sent by the  
network to mobile phone users. They provide general  
information such as weather reports or traffic  
conditions. Each type of information has the number;  
therefore, you can contact the service provider as long  
as you have input the certain number for the  
information. When you receive an info service  
message, a popup message will indicate a new  
message receipt or the info service message will be  
displayed directly. The following options are available  
when viewing info service messages.  
Active list  
You can set whether you will receive each info  
service message or not using the left soft key  
[On/Off] in this list.  
Templates [Menu-1-8 ]  
There are pre-defined messages in the list. You can  
view and edit the template messages or create new  
messages. Two types of templates are available: Text  
and Multimedia.  
Read [Menu-1-7-1 ]  
1. Select Read to view the message, it will be displayed  
on the screen.  
Text templates [Menu-1-8-1 ]  
Please call me back.  
I’m late. I will be there at...  
Where are you now?  
I am on the way.  
2. The message will be shown until another message is  
reached.  
Topics (Network dependent) [Menu-1-7-2 ]  
Add new  
You can add a new info service message number  
with its nickname in the phone or in the SIM (if the  
SIM is available).  
Top urgent. Please contact.  
I love you.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
36  
Messages [Menu-1 ]  
The following options are available.  
]Add new: Allows you to add a new multimedia  
template.  
]View: You can view the selected template.  
]Write messages: You can write a multimedia  
message with the multimedia template.  
]Edit: Use this to write a new message or edit the  
selected template message from the text template  
list.  
]Delete: Deletes the selected template message from  
the multimedia template list.  
]Write messages  
]Delete all: Clears the multimedia template list.  
- Write text message: Use this to send the selected  
template message by SMS.  
Signature [Menu-1-8-3 ]  
- Write multimedia message: Use this to send the  
selected template message by MMS.  
This option helps you to make your own name card.  
Key in the name, mobile phone number, home number,  
office number, Fax number, and E-mail address. After  
creating the name card, you can access the following  
options using the left soft key [Options].  
]Add new: Use this to create new template.  
]Delete: Deletes the selected template.  
]Delete all: Deletes all the text templates.  
]Edit: You can edit the name card.  
Multimedia templates [Menu-1-8-2 ]  
]Write messages  
You can create a multimedia template after pressing  
the left soft key [Add new]. And the multimedia  
templates you saved as a template while creating a  
multimedia message in the Write multimedia message  
(See page 31).  
- Write text message: Use this to send the name card  
by SMS.  
- Write multimedia message: Use this to send the  
name card by MMS.  
]Delete: Deletes the name card.  
]View: You can view the multimedia template.  
]Edit: You can edit the multimedia template.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
37  
Messages [Menu-1 ]  
]SMS centre: Saves or changes the number of your  
SMS centre when sending text messages. You must  
obtain this number from your service provider.  
Settings [Menu-1-9 ]  
Text message [Menu-1-9-1 ]  
Multimedia message [Menu-1-9-2 ]  
This menu lets you set up default SMS information.  
Via this menu, you can set up the default multimedia  
message information.  
The following options are available.  
]Message types: Set the default message type (Text,  
Voice, Fax, Natl. paging, X.400, E-mail, ERMES). The  
network can convert the messages into the selected  
format.  
]Priority: Set the priority for the multimedia messages  
you will send.  
]Validity period: Set the length of time for which your  
text messages will be saved at the SMS center while  
attempts are made to deliver them to the recipient.  
Possible values are 1 hour, 12 hours, 1 day, 1 week and  
the maximum authorised by your network operator.  
]Validity period: Set the length of time for which your  
multimedia messages will be saved in the network  
server while attempts are made to deliver them to  
the recipient. Possible values are 1 hour, 12 hours, 1  
day, 1 week and the maximum authorised by your  
network operator.  
]Delivery report: Select whether to activate or  
deactivate the report function. When this function is  
activated, the network informs you whether or not  
your message has been delivered.  
]Delivery report: Select whether to activate or  
deactivate the report function. When this function is  
activated, the network informs you whether or not  
your message has been delivered.  
]Reply via same service centre: Allows the recipient  
of your SMS message to send you a reply via your  
message centre, if the service is provided by the  
network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
38  
Messages [Menu-1 ]  
]Auto download  
Info message [Menu-1-9-4 ]  
On: If you select this, messages are downloaded  
Info service messages are text messages delivered by  
the network to GSM. They provide general information  
such as weather reports, traffic news, taxis,  
automatically on receipt.  
Off: Requires you to confirm you want to download  
pharmacies, and stock prices. Each type of information  
has the number; therefore, you can contact service  
provider as long as you have input the certain number  
for the information. When you have received an info  
service message, you can see the popup message to  
show you that you have received a message or the info  
service message is directly displayed. The following  
options are available.  
the message.  
Home network only: If you select this, messages are  
downloaded automatically on receipt in your home  
network area. And outside your home service area,  
it requires you to confirm you to download the  
message.  
]Network settings: If you select the multimedia  
message server, you can set the URL for multimedia  
message server.  
]Receive: If you select YES, your phone will receive  
Info service messages. Otherwise, it will not receive  
Info service messages any more.  
]Permitted types: Set the permitted type. Possible  
values are Personal, Advertisements and  
Information.  
]Alert: If you select YES, Your phone will beep when  
you have received Info service message numbers.  
Otherwise, it will not beep even though you have  
received info service messages.  
Voice mail centre [Menu-1-9-3 ]  
You can check the voice mail centre address.  
]Languages: You can select the language you want  
by pressing [On/Off]. Then, the info service message  
will be shown in the language that you selected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
39  
Messages [Menu-1 ]  
Push messages [Menu-1-9-5 ]  
Icon  
Description  
You can order push messages from WAP service  
providers. Push messages are notifications of, for  
example, news headlines and they can contain a text  
message or the address of a WAP service. For  
availability and subscription, contact your WAP  
service provider.  
Read Push Message  
Unread Push Message  
After selecting a push message, the following menus  
are available.  
Note  
Information: Shows the information of the current  
• Service providers can update an existing push  
message with a new incoming push message.  
(Old one will be replaced with new one.)  
push message.  
Load: Connects to a specific site using the  
information in the current push message.  
• When push messages expire, they are deleted  
automatically.  
Delete: Deletes the current push message.  
Delete All: Deletes all the messages in inbox  
(including SMS, MMS, etc.).  
In this menu, you can set the push message receive  
option.  
]Receive on: If you select this, all push messages will  
be accepted irrespective of the origination.  
]Receive off: Will not accept any push message.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
40  
Call register [Menu-2 ]  
You can check the record of missed, received, and  
dialled calls only if the network supports Calling Line  
Identification (CLI) within the service area.  
View the date and time at which the call was made.  
• Save the number in the phonebook. Enter a name for  
the number and save it in the phonebook.  
The number and name (if available) are displayed  
together. You can also view call times and costs.  
• Send a message to this number.  
Delete the call from the list.  
Press the menu key ( ) and select Call register  
using navigation keys.  
Note  
You can delete all the call records from the list  
using the Delete recent calls menu. (See page 42.)  
Missed calls [Menu-2-1 ]  
This option lets you view unanswered calls. After  
pressing the left soft key [Options], you can also:  
Dialled calls [Menu-2-3 ]  
View the date and time at which the call was made.  
This option lets you view outgoing calls (called or  
attempted). Using the [Options] key, you can also:  
• Save the number in the phonebook. Enter a name for  
the number and save it in the phonebook.  
View the date and time at which the call was made.  
• Send a message to this number.  
Delete the call from the list.  
• Save the number in the phonebook. Enter a name for  
the number and save it in the phonebook.  
• Send a message to this number.  
Delete the call from the list.  
Note  
You can delete all the call records from the list  
using the Delete recent calls menu. (See page 42.)  
Note  
You can delete all the call records from the list  
using the Delete recent calls menu. (See page 42.)  
Received calls [Menu-2-2 ]  
This option lets you view incoming calls. After pressing  
the left soft key [Options], you can also:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
41  
Call register [Menu-2 ]  
Call costs [Menu-2-5-2]  
Delete recent calls [Menu-2-4 ]  
This network service allows you to check the last call  
cost, the total call cost and the remaining call cost.  
The call cost is displayed on the bottom of the LCD  
screen. To reset the call cost, select Reset all. You are  
requested to enter the PIN2 code.  
Use this to delete the missed call list, received call list,  
or dialled call list. You can also delete all call lists at a  
time selecting All calls.  
Call charges [Menu-2-5 ]  
Call duration [Menu-2-5-1 ]  
Note  
The actual cost invoiced for calls by your service  
provider may vary, depending on network  
features, rounding-off for billing, taxes, etc.  
Use this to view the duration of your incoming and  
outgoing calls. You can check each call duration at the  
bottom of screen while scrolling using the up/down  
navigation keys. You can reset the call timer by  
selecting Reset all.  
Settings [Menu-2-5-3]  
Set tariff  
Last call: Length of the last call.  
Set tariff: You can set the currency type and the unit  
price. Contact your service provider to obtain  
All calls: Total length of all calls made or received  
calls since the timer was last reset.  
charging unit prices. To select the currency or unit in  
this menu, you need the PIN2 code. If you want to  
input @, £, $ symbol, clear all currency strings and  
Received calls: Length of the incoming calls.  
Dialled calls: Length of the outgoing calls.  
Reset all: Select this to reset all the call duration.  
then press  
key. If you want to change the  
key again.  
symbol, press  
Note  
The actual time invoiced for calls by your service  
provider may vary, depending on network  
features, rounding-off for billing, etc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
42  
Call register [Menu-2 ]  
Note  
Call duration [Menu-2-6-1]  
• When all units have been used, no calls can be  
made except emergency calls. Depending on  
the SIM card, you need the PIN2 code to set a  
call cost limit.  
You can check the duration of the last call and all calls.  
You can also reset the call timers by selecting Reset  
all.  
Data volumes [Menu-2-6-2]  
You can check the sent data volume, received data  
volume, and all data volume. You can also reset the  
counter by selecting Reset all.  
Set credit  
This network service allows you to limit the cost of  
your calls to the selected charging units. You can  
make or receive a call up to the specified cost limit.  
Read: You can check the remaining units.  
Change: You can change your charging limit.  
Auto display  
This network service allows you to see automatically  
the cost of your last call. If you select On, you can  
see the cost of the last call when the call is released.  
GPRS information [Menu-2-6]  
You can check the amount of data transferred over the  
network through the GPRS information option. In  
addition, you can also view how much time you are  
online. (GPRS stands for General Packet Radio  
Service.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
43  
Profiles [Menu-3 ]  
In Profiles, you can adjust and customise the phone  
tones for different events, environments. There are six  
preset profiles: General, Loud, Headset, Car, Vibrate  
Only and Quiet. Each profile can be personalised.  
4. Message alert type: Select the alert type for  
receiving a message.  
5. Message tone: Select the alert tone for receiving a  
message.  
Press the menu key (  
navigation keys.  
) and select Profiles using  
6. Keypad volume: Set the volume of keypad tone.  
7. Keypad tone: Select the desired keypad tone.  
8. Effect sound volume: Set the volume of effect sound.  
Changing the profile [Menu-3-x-1]  
1. A list of profiles is displayed.  
9. Power on/off volume: Set the volume of the ringing  
tone when switching the phone on/off.  
2. In the Profile list, scroll to the profile you want to  
activate and press the left soft key [Select].  
0. Auto answer: (only in Headset profile and Car  
profile) You can activate the automatic answer  
feature. Select when the phone answers  
automatically.  
3. Then, select Activate.  
Customising profiles - Personalise [Menu-3-x-2]  
Off: Deactivates the Auto answer feature.  
Scroll to the desired profile in the Profile list and select  
Personalise. The profile setting option opens. Set the  
option as required.  
After 5 secs: After 5 seconds, the phone will  
answer automatically.  
After 10 secs: After 10 seconds, the phone will  
1. Call alert type: Set the alert type for incoming calls.  
answer automatically.  
2. Ring tone: Select the desired ring tone from the list.  
Scroll through the list using up/down navigation  
keys. You can hear the desired tone prior to making  
a selection.  
3. Ring volume: Set the volume of the ringing tone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
44  
Profiles [Menu-3 ]  
Customising profiles - Rename [Menu-3-x-3]  
You can rename a profile and give it any name you  
want. Vibrate only, Headset and Car profiles cannot be  
renamed.  
1. To change the name of a profile, scroll to the profile  
in the profile list and select Rename.  
2. Key in the desired name and press the left soft key  
[OK].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
45  
Settings [Menu-4 ]  
Press the menu key (  
the navigation keys.  
) and select Settings using  
Phone settings [Menu-4-2]  
Many features of your phone can be customised to suit  
your preferences. All of these features are accessed  
via the Phone settings menu.  
Date & Time [Menu-4-1]  
This option lets you change the current time and date  
displayed.  
Wallpaper [Menu-4-2-1]  
The following options are available.  
Use this to set up the display on the LCD screen in  
standby mode.  
Set date [Menu-4-1-1]  
Greeting note [Menu-4-2-2]  
Use this to enter the day, month and year. You can  
change the date format via the Date format menu  
option.  
If you select On, you can edit the text which will be  
displayed in standby mode  
Date format [Menu-4-1-2]  
DD/MM/YYYY (day/month/year)  
MM/DD/YYYY (month/day/year)  
YYYY/MM/DD (year/month/day)  
Language [Menu-4-2-3]  
You can select the display language. When the  
language option is set to Automatic, the language is  
automatically selected according to the language of  
the SIM card used. English will be set if the language  
on the SIM card is not supported by the phone.  
Set time [Menu-4-1-3]  
Use this to enter the current time. You can choose the  
time format via the Time format menu option.  
Backlight [Menu-4-2-4]  
Use this to select whether or not the phone uses the  
backlight. A small increase in standby/talk time can be  
achieved by turning the backlight off.  
Time format [Menu-4-1-4]  
24-hour  
12-hour  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
46  
Settings [Menu-4 ]  
All voice calls  
LCD contrast [Menu-4-2-5]  
Diverts all voice calls unconditionally.  
Adjust the LCD contrast with  
,
.
If busy  
Information window [Menu-4-2-6]  
Diverts voice calls when the phone is in use.  
You can preview the current state of the selected  
menu before opening the menu. The state is shown on  
the bottom of the screen.  
If no reply  
Diverts voice calls which you do not answer.  
If out of reach  
Menu colour [Menu-4-2-7]  
Diverts voice calls when the phone is switched off or  
out of coverage.  
Your phone provides you with 4 menu colour themes.  
Set the menu colour by scrolling and pressing the left  
soft key [Select].  
All data calls  
Diverts to a number with a PC connection  
unconditionally.  
Call settings [Menu-4-3]  
To change the settings for call diverting.  
Call divert [Menu-4-3-1]  
All fax calls  
Diverts to a number with a fax connection  
unconditionally.  
When this network service is activated, you can direct  
your incoming calls to another number, for example, to  
your voice mailbox number. For details, contact your  
network operator. Select one of the divert options, for  
example, select If busy to divert voice calls when your  
number is busy or when you reject incoming calls.  
Each option has the following menu:  
- Activate  
Activates the corresponding service.  
To voice mail centre: Forwards to message centre.  
This function does not apply to All data calls and All  
fax calls menus.  
The following options are available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
47  
Settings [Menu-4 ]  
To other number: Input the number for call  
diverting.  
Send my number [Menu-4-3-3]  
This network service lets you decide whether your  
phone number is displayed (On) or hidden (Off) from  
the person you are calling. Select Set by network to  
reset the phone to the setting that you have agreed  
upon with your service provider.  
To favourite number: After entering up to 5  
frequently used phone numbers, you can divert  
calls to them.  
- Cancel  
Call waiting [Menu-4-3-4]  
(Network Service)  
Cancels the selected call divert.  
- View status  
The network will notify you of a new incoming call  
while you have a call in progress. Select Activate to  
request the network to activate call waiting, Cancel to  
request the network to deactivate call waiting, or View  
status, to check if the function is active or not.  
You can check the status of the service.  
Cancel all: Cancels all call divert settings.  
Answer mode [Menu-4-3-2]  
Select the desired mode to answer a call.  
Press any key  
Minute minder [Menu-4-3-5]  
When set to On, the phone will beep every minute  
during an outgoing call to keep you informed of the  
length of the call.  
When the phone rings, you can answer a call by  
pressing any key except the  
soft key ( ).  
key and the right  
Auto redial [Menu-4-3-6]  
Send only  
Select On, and your phone will make a maximum of  
four attempts to connect the call after an unsuccessful  
call attempt.  
You can answer a call only by pressing the send key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
48  
Settings [Menu-4 ]  
Delete  
: Delets the selected CUG.  
Select line (SIM dependent) [Menu-4-3-7]  
Delete all : Delets all CUG.  
This menu is shown only if the SIM supports two  
subscriber numbers, that is, two phone lines. Select  
which phone line (between Line 1 and Line 2) you want  
to use for making calls and sending short messages.  
Calls on both lines can be answered irrespective of the  
selected line.  
Security settings [Menu-4-4]  
Various passwords are used to protect certain  
features of your phone. Refer to page 19 for the various  
passwords.  
Note  
You will not be able to make calls if you select Line  
2 and have not subscribed to this network service.  
PIN code request [Menu-4-4-1]  
When the PIN code request feature is enabled, you  
must enter your PIN each time you switch the phone  
on. Consequently, any person who does not have your  
PIN cannot use your phone without your approval.  
Closed user group [Menu-4-3-8]  
(Network dependent)  
Restricts usage of the phone with numbers that belong  
to certain user groups. When this function is used,  
every outgoing call is associated with a group index. If  
a group index is specified, it is used for all outgoing  
calls. If no group index is specified, the network will  
use the preferential index (a specific index that is  
stored in the network).  
Note  
• Before disabling the PIN code request feature, you  
must enter your PIN.  
The following options are available:  
On: You must enter the PIN each time the phone is  
Default  
: Activates the default group agreed on with  
the network operator.  
switched on.  
Set  
: Select this to activate the selected CUG  
Off: The phone connects directly to the network when  
Index.  
you switch it on.  
Edit  
: You can edit the CUG name and CUG  
Index.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
49  
Settings [Menu-4 ]  
Phone lock [Menu-4-4-2]  
Note  
• If you want to lock your phone keypad manually,  
press then  
To unlock your phone keypad, press  
key and then press key. If you enable  
Automatic key lock, your phone keypad will lock  
again automatically after 10 seconds.  
When the Phone lock feature is enabled, the phone is  
locked and you must enter the phone password each time  
the phone is switched on.  
.
[unlock]  
The password is factory set to 0000. To change the phone  
password, refer to the Change codesSecurity code  
menu option (Menu-4-4-6-3). Once the correct password  
has been entered, you can use the phone until you switch  
it off.  
Call barring (Network dependent) [Menu-4-4-4]  
The following options are available:  
Call barring lets you restrict the making and receiving  
of calls with your phone. For this function, you need  
the Network password, which you can obtain from  
your service provider.  
On  
You are required to enter the phone password when  
you switch the phone on.  
Off  
The following options are available:  
All outgoing  
The phone connects directly to the network when  
you switch it on.  
No call can be made.  
Automatic  
Outgoing international  
Your phone will request security code only when you  
change your SIM card.  
International calls cannot be made.  
Outgoing international except home country  
Automatic key lock [Menu-4-4-3]  
When you enable Automatic key lock, keypad will be  
locked automatically on an idle screen after 10  
seconds without any key requesting.  
When abroad, calls can be made only to numbers  
within the current country and to your home country,  
the country where your home network provider is  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
50  
Settings [Menu-4 ]  
located.  
Fixed dial number (FDN) [Menu-4-4-5]  
(SIM dependent)  
All incoming  
Use this to restrict your outgoing calls to selected  
phone numbers, if this function is supported by your  
SIM card. The PIN2 code is required.  
No call can be received.  
Incoming when abroad  
Calls cannot be received when you are using your  
phone outside your home service area.  
The following options are available:  
Activate  
Cancel all  
Use this to only call phone numbers saved in the  
phonebook. You must enter your PIN2 code.  
All call barring settings are deactivated; calls can be  
made and received normally.  
Cancel  
Change password  
Allows you to call any number.  
Number list  
Use this to set and change the call barring password  
obtained from your service provider using this option. You  
must enter the current password before you can specify  
a new one. Once you have entered a new password, you  
are asked to confirm it by entering it again.  
Use this to view the numbers saved as fixed dial  
numbers.  
Note  
Note  
• Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
To use Call barring service, you must input the  
network password. When calls are barred, calls  
may be possible to certain emergency numbers  
on some networks.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
51  
Settings [Menu-4 ]  
Change codes [Menu-4-4-6]  
Automatic [Menu-4-5-1]  
The Change codes feature lets you change your current  
password to a new one. You must enter the current  
password before you can specify a new one.  
Use this to set the phone to automatically search for  
and select one of the cellular networks available in  
your area. The phone will default back to Automatic if it  
is switched off.  
Use this to change the access codes: PIN code, PIN2  
code, Security code  
Manual [Menu-4-5-2]  
Note  
If you want to select the desired network manually  
from a list of network. If the connection to the manually  
selected network is lost, the phone will sound an error  
tone and ask you to select a network again. The  
selected network must have a roaming agreement with  
your home network, that is, the operator whose SIM  
card is in your phone. The phone will let you select  
another network if the phone fails to access the  
selected network. If you switch off the phone, the  
phone will be reset to Automatic.  
• PIN: Personal Identification Number  
Network settings [Menu-4-5]  
The Network settings feature enables you to indicate  
whether the network used when roaming (outside your  
home area) is selected Automatic, Manual or  
Preferred.  
Note  
Preferred [Menu-4-5-3]  
You can select a network other than your home  
network only if it has a valid roaming agreement  
with your home network.  
You can set a list of preferred networks the handset  
should attempt to register with first, before attempting  
to register to any other networks. This list is created  
from the handsets predefined list of known networks.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
52  
Settings [Menu-4 ]  
GPRS setting [Menu-4-6]  
Reset settings [Menu-4-7]  
GPRS(General Packet Radio Service) is a technology that  
allows mobile phones to be used for sending and  
receiving data over the mobile network. GPRS is a data  
bearer that enables wireless access to data network such  
as the Internet.  
You can reset your phone to its default configuration.  
To do so, proceed, as follows.  
1. Select the Reset settings menu option.  
2. You are requested to enter the 4-digit security code.  
Note  
Before you can use GPRS technology  
The security code is preset to 0000. To change  
this, refer to page 52.  
- You need to subscribe to the GPRS service. For  
availability and subscription to GPRS service, contact  
your network operator or service provider.  
- You need to save the GPRS settings for the applications  
used over GPRS.  
Power on [Menu-4-6-1]  
If you select Power on and you are in a network that  
supports GPRS, the phone registers to the GPRS  
network and sending short messages will be done via  
GPRS. Also, starting an active packet data connection,  
for example, to send and receive e-mail, is quicker.  
When needed [Menu-4-6-2]  
If you select When needed, the phone will use a GPRS  
connection only if you start an application or action  
that needs it. The GPRS connection is closed after it is  
no longer required by any application.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
53  
Organiser [Menu-5 ]  
To turn off the alarm, press the right soft key [Quit].  
Press the menu key ( ) and select Organiser.  
Scheduler [Menu-5-2]  
Alarm clock [Menu-5-1]  
When you enter this menu, a calendar appears. A  
square cursor is located on the current date. You can  
move the cursor to another date using navigation keys.  
On the calendar, you can use the following keys.  
There are 5 alarm clocks available. Set the alarm to  
ring at a specific time.  
After selecting an alarm clock using the left soft key  
[Select],  
skips back a year.  
1.  
Alarm on/off: Select On using the left/right  
navigation key. To deactivate the alarm function,  
select Off.  
Each press of  
skips forward a year.  
skips back a month.  
skips forward a month.  
2.  
3.  
Alarm time: Enter the alarm time using the  
numeric keys  
Repeat: Select the desired one from Once,  
Mon~Fri, Mon~Sat, and Everyday using the left/right  
navigation key.  
You can enter a schedule or memo in the scheduler by  
pressing the left soft key [Options].  
]Add new: Select this to enter a new schedule or a  
memo. After a schedule note or memo is entered on  
a date, the date is shown in a different colour and  
4.  
Alarm melody: Select the desired alarm melody  
using the left/right navigation key.  
5. Press the left soft key [OK].  
” (schedule), “ ” (memo) appears on the right  
bottom of the screen. This function reminds you of  
your schedule. And the phone will sound an alarm  
tone if you set the phone to do so.  
6. You can edit the alarm clock name. After keying in  
the name, press the left soft key [OK].  
When the alarm time is reached, it sounds the alarm  
melody.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
54  
Organiser [Menu-5 ]  
]View: Shows the schedule note or memo for the  
chosen day. Press the left soft key [Options] to edit  
or delete the note you selected.  
You can access the phonebook directly by pressing  
the down navigation key (  
) in standby mode.  
Note  
]View all: Shows all the notes that are entered in the  
phone. Use the up/down navigation keys to browse  
through the note lists.  
You can also scroll through the phonebook from  
the beginning, by pressing the left soft key [List]  
directly.  
]Delete past: Select this to delete the expired  
schedule notes that have already been notified. You  
are asked to confirm this action.  
3. After finding the desired contact, you can make a  
call to the number by pressing the key. Or press the  
]Delete all: Select this to delete all the schedule  
notes and memos. You are asked to confirm this  
action.  
left soft key  
options.  
[Option] to use the following  
Edit: You can edit the name and number.  
Phonebook [Menu-5-3]  
Write messages  
- Write text message: Use this to write a text  
message to the contact.  
You can save phone numbers and their corresponding  
names in the memory of your SIM card. In addition,  
you can save up to 200 numbers and names in the  
phone memory.  
- Write multimedia message: Use this to write a  
multimedia message to the contact.  
Copy: Use this to copy the contact entry from SIM to  
the phone memory or vice versa.  
Search [Menu-5-3-1] (Calling from phonebook)  
1. Select Search. You are asked to enter a name.  
Main number: Select which number will be the main  
number. The main number will be displayed first  
2. Enter the start of the name that you wish to find and  
press left soft key [Search].  
Delete: Deletes the contact.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
55  
Organiser [Menu-5 ]  
1. Select Caller groups. All group lists will be  
displayed: Family, Friends, Colleague, VIP, Group 1,  
Group 2, and Others.  
Add new [Menu-5-3-2]  
You can add a phonebook entry using this function.  
There are 2 memories: Phone memory and SIM  
memory. To select the memory, go to Set memory  
[Menu-5-3-5-1]. The phone memory capacity is 200  
entries. The SIM card memory capacity depends on  
the SIM card.  
2. Select the group name that you want to manage by  
pressing the left soft key [Option]. The following  
submenus will be displayed.  
Member list  
Displays the member list in the group.  
Group ring tone  
1. You can add new phonebook entries to the SIM  
memory or the phone memory. To select the memory,  
go to Set memory [Menu-5-3-5-1]. (Refer to page 57.)  
Use this to select the ring tone to be used when  
you receive a voice phone call from a person in the  
group.  
Adding new entries into SIM memory  
You can enter a name and number, and select the  
required group. (Depends on the SIM)  
Group icon  
Adding new entries into the phone memory  
Use this to select the graphic icon to be displayed  
when you receive a call from a person in the  
group.  
You can enter a name, numbers, E-mail address and  
select the required group. And select which number  
will be the main number.  
Add member  
Caller groups [Menu-5-3-3]  
Add a member to the group. You can add up to 20  
members per group.  
You can list up to 20 contacts per group. There are 7  
pre-defined groups, where you can create lists.  
Remove member  
Removes the member from the group member list.  
The contact entry still remains in the phonebook.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
56  
Organiser [Menu-5 ]  
Rename  
Search by  
Assigns a new name to the group.  
You can set the phone to search by name or number,  
when you search the phonebook. If you select  
Variable, the phone will ask how to search when you  
search the phonebook.  
Speed dial [Menu-5-3-4]  
You can assign any of the keys 2 to 9 with a name list  
entry. You can call directly by pressing this key for 2-3  
seconds.  
View options  
You can set the phonebook display option.  
1. Open the phonebook first by pressing the right soft  
key [Names] in standby mode.  
- Name only : When you search the phonebook, the  
list displays only names.  
2. Scroll to Speed dial, then press [Select].  
- With pictures : When you search the phonebook,  
the list displays names and corresponding pictures.  
3. To add a number to Speed dial, select (Empty). Then,  
you can search the name through the phonebook.  
- Name & number: When you search the phonebook,  
the list displays names and numbers.  
4. You can change or delete a speed dial number,  
make a call or send a message by pressing the left  
soft key [Option].  
Copy all [Menu-5-3-6]  
You can copy/move entries from the SIM card memory  
to the phone memory and vice versa.  
Settings [Menu-5-3-5]  
Set memory  
SIM to Phone : Use this to copy the entry from the  
SIM Card to the Phone memory.  
You can select the memory for the phonebook  
feature between the SIM and the phone. If you select  
Variable, when adding entry, the phone will ask  
where to save the number.  
Phone to SIM : Use this to copy the entry from the  
Phone memory to the SIM Card.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
57  
Organiser [Menu-5 ]  
The following options are available.  
Memory status: You can check the current  
memory status of the SIM card or the phone  
memory.  
Keep original : When copying, the original dial  
numbers are kept.  
Own number (SIM dependent): Use this to display  
your phone number in the SIM card.  
Delete original : When copying, the original dial  
numbers will be erased.  
Delete all [Menu-5-3-7]  
You can delete all entries in the SIM and/or phone.  
This function requires the security code.  
]Press  
to return to standby mode.  
Information [Menu-5-3-8]  
Service dial number (SIM dependent):  
Use this to view the list of Service Dialling Numbers  
(SDN) assigned by your network operator (if  
supported by the SIM card). Such numbers include  
the emergency, directory enquiries and voice mail  
numbers.  
1. Select the Service dial number option.  
2. The names of the available services will be shown.  
3. Use the up/down navigation keys to select a  
service. Press  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
58  
Tools [Menu-6 ]  
Calculator [Menu-6-2]  
Press the menu key (  
navigation keys.  
) and select Tools using the  
Using this feature, you can use the phone as a  
calculator. The calculator provides the basic  
arithmetic functions: addition, subtraction,  
multiplication and division. (You can enter numbers up  
to the second decimal place).  
Favourites [Menu-6-1]  
In this menu, you can construct your own menu with  
the menus you use frequently for easy access.  
Using the Calculator  
1. After selecting the desired location from menu  
number 1 to 9, press the left soft key [Add].  
1. Enter the first number using the numeric keys.  
2. Select the menu you wish to add, then press the left  
soft key [Add]. The menu is added in the Favourites  
menu, with the pop-up message, “Added as a  
favourite menu”.  
2. Press the corresponding navigation key to select a  
mathematical function.  
Note  
To erase any mistakes or clear the display, press  
After making up the Favourites menu, in each favourite  
menu, the following options are available by pressing  
the left soft key [Options].  
the  
the  
key. To include a decimal point, press  
key. To include a minus sign, press the  
key.  
- Select  
: Selects the menu.  
- Change  
: You can change the favourite menu with  
another menu.  
3. To calculate the result, press the left soft key  
[Result].  
- Delete  
: Deletes the selected favourite menu.  
4. After calculation, press the left soft key [Reset] to  
- Delete all : Deletes all the favourite menus.  
return to the menu.  
- Information : Displays the route to the favourite menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
59  
Tools [Menu-6 ]  
3. Select the unit you want to convert using the  
left/right navigation keys.  
My folder [Menu-6-3]  
The downloaded contents through WAP, MMS or EMS  
are stored in each folder. You can view, delete or  
control the downloaded contents.  
4. Move to the Convert unit section by pressing the  
down navigation key.  
5. Select the unit you want to convert to, using the  
left/right navigation keys.  
Picture [Menu-6-3-1]  
Select a picture from the list by pressing the left soft  
key [View]. Then, you can set it as the wallpaper or  
send it via multimedia message by pressing the left  
soft key [Options].  
6. numbers using the numeric keys. Conversion is  
calculated automatically.  
Note  
You can input a decimal number by pressing the  
key.  
Sound [Menu-6-3-2]  
You can select a sound from the list. After selecting the  
desired sound, you can set it as the ring tone, send the  
sound via SMS or MMS, using the left soft key [Options].  
World time [Menu-6-5]  
You can check the current time of Greenwich Mean  
Time (GMT) and 65 major cities around the world,  
using the left/right navigation keys.  
Unit converter [Menu-6-4]  
This converts any measurement from one unit to  
another. There are 4 types that can be converted into  
units: Length, Area, Weight and Volume.  
The screen shows the city name, current date and time.  
To select the time zone in which you are located,  
proceed as follows:  
1. Select one of four unit types by pressing the left soft  
key [Unit].  
1. Select the city corresponding to your time zone by  
pressing the left/right navigation keys. The local date  
and time are displayed.  
2. Move to the current unit section by pressing the  
down navigation key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
60  
Tools [Menu-6 ]  
2. If you want to change the time display in standby  
mode to the selected time, press the left soft key  
[Set].  
View list [Menu-6-6-2]  
The phone shows the voice memo title which you have  
recorded. You can play back or delete the recorded  
voice memo.  
Note  
The time zone setting of each city in World time  
menu may be affected by network condition.  
Playback: Plays back the voice memo.  
Write multimedia message: You can write multimedia  
messages using the voice memo.  
Delete: Deletes the voice memo.  
Voice recorder [Menu-6-6]  
Delete all: Allows you to delete all the memos. Press  
the left soft key [Yes] to confirm.  
You can record a memo. You can record up to 10 voice  
memos up to a maximum of 20 seconds each. You can  
play or delete the recorded memo or record new voice  
memo using the left soft key [Options] key.  
Note  
• In standby mode, you can access this menu by  
pressing the  
key.  
Record [Menu-6-6-1]  
1. Once recording is started, the message  
‘Recording...’ and the remaining time is displayed.  
Memory status [Menu-6-7]  
2. When you finish recording, press left soft key [Save].  
You can check the current memory status of each  
repository: Free memory, Text message, Multimedia  
message, Inbox, Outbox, Drafts, Multimedia templates,  
Messages in SIM, Push message, Voice memo,  
Picture, Sound. And you can go to each repository to  
manage it.  
Note  
• In standby mode, you can start recording by  
pressing and holding the  
key.  
• If all memo locations are full, you must delete an old  
memo before recording a new one.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
61  
Internet [Menu-7 ]  
You can access various WAP (Wireless Application  
Protocol) services such as banking, news, weather  
reports and flight information. These services are  
specially designed for mobile phones and they are  
maintained by WAP service providers. Check the  
availability of WAP services, pricing and tariffs with  
your network operator and/or the service provider  
whose service you wish to use. Service providers will  
also give you instructions on how to use their services.  
Using the WAP browser menu  
There are various menu options available when surfing  
the Mobile Web.  
Note  
The WAP browser menus may vary, depending on  
your browser version.  
Home [Menu-7-1]  
Once connected, the homepage is displayed. The  
content depends on the service provider. To exit the  
Connects to a homepage. The homepage will be the  
site which is defined in the activated profile. It will be  
defined by the service provider if you have not defined  
it in the activated profile.  
browser at any time, press the (  
will return to the standby mode.  
) key. The phone  
Navigating with the WAP browser  
You can surf the Internet using either the phone keys  
or the WAP browser menu.  
Bookmarks [Menu-7-2]  
This menu allows you to store the URL of favourite web  
pages for easy access at a later time. Your phone has  
several pre-installed T-Mobile bookmarks. These pre-  
installed bookmarks cannot be deleted.  
Using the phone keys  
When surfing the Internet, the phone keys function  
differently to phone mode.  
Key  
Description  
Scrolls each line of the content area  
Returns to the previous page  
Selects options and confirms actions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
62  
Internet [Menu-7 ]  
To create a bookmark  
1. T-Mobile Internet  
1. Press the left soft key [Options].  
2. Select Add new.  
If you want to connect the server via WAP 2.0,  
activate this profile.  
2. T-Mobile GPRS  
3. After entering the desired URL and title, press the  
.
If you want to connect the WAP server over GPRS,  
activate this profile.  
Tip: Use the key  
and  
key to enter  
.
3. T-Mobile WAP  
symbols. To enter “.”, press  
If you want to connect the WAP server over CSD,  
activate this profile. For more information, consult T-  
mobile.  
After selecting a desired bookmark, the following  
options are available.  
Connect : Connects to the selected bookmark.  
Each profile has submenus as follows:  
Activate  
Add new : Select this to create a new bookmark.  
Edit  
: You can edit the URL and/or the title of the  
selected bookmark.  
Activates the selected profile.  
Settings  
Delete : Deletes the selected bookmark.  
Use this to edit and change WAP settings for the  
selected profile.  
Delete all: Deletes all the bookmarks.  
- Homepage  
Profiles [Menu-7-3]  
This setting allows you to enter the address (URL)  
of a site you want to use as homepage. You do not  
WAP Browser will automatically add it.  
A profile is the network information used to connect to  
the Internet. T-mobile supports three kinds of profile.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
63  
Internet [Menu-7 ]  
- Bearer  
Linger time : You need to enter timeout period.  
After entering that, the WAP  
You can set the bearer data service.  
navigation service will be unavailable  
if any data is not input or transferred.  
Data  
GPRS  
- GPRS settings  
- Data settings  
The service settings are only available when GPRS  
is chosen as a bearer service.  
Appears only if you select Data Settings as a  
Bearer / service.  
IP address : Input the IP address of the WAP  
gateway you access.  
IP address : Enter the IP address of the WAP  
gateway you want.  
APN : Input the APN of the GPRS.  
Dial number : Enter the telephone number to dial to  
User ID : The users identify for your APN server.  
access your WAP gateway.  
Password : The password required by your APN  
User ID : The users identity for your dial-up server  
server.  
(and NOT the WAP gateway).  
- Connection type  
Password : The password required by your dial-up  
server (and NOT the WAP gateway) to  
identify you.  
The options for connection type are Temporary or  
Continuous and depend on the gateway you are  
using.  
Call type : Select the type of data call : Analogue of  
Continuous  
Digital (ISDN)  
A confirmed delivery mechanism but generates  
more network traffic.  
Call speed : The speed of your data connection ;  
9600 or 14400  
Temporary  
A non-confirmed (connectionless) service.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
64  
Internet [Menu-7 ]  
HTTP  
Rename  
Connecting Clients to Server directly in HTTP  
You can change the profile name.  
Delete  
- Proxy settings  
IP address : Input the IP address of the Proxy  
Deletes the selected profile from the list.  
Add new  
server you access.  
Port : Input the Proxy Port  
You can add a new profile.  
- DNS settings  
Go to URL [Menu-7-4]  
Insert the primary and secondary DNS if required  
by the network operator.  
You can connect directly to the site you want. After  
entering a specific URL, press the  
.
Primary server  
Input the IP address of the primary DNS server you  
access.  
Cache settings [Menu-7-5]  
The information or services you have accessed are  
saved in the cache memory of the phone.  
Secondary server  
Input the IP address of the secondary DNS server  
you access.  
Clear cache [Menu-7-5-1]  
Removes all context saved in cache.  
- Secure settings  
Check cache [Menu-7-5-2]  
According to the used gateway port, you can  
choose this option as On or Off.  
Set a value whether a connection attempt is made  
through cache or not.  
- Display image  
You can select whether images on WAP cards are  
displayed or not.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
65  
Internet [Menu-7 ]  
Note  
Reset profiles [Menu-7-8]  
• A cache is a buffer memory, which is used to save  
data temporarily.  
You can reset profiles to return to original settings.  
Browser version [Menu-7-9]  
Cookies settings [Menu-7-6]  
The WAP browser version is displayed.  
The information or services you have accessed are  
saved in the cache memory of the phone.  
Clear cookies [Menu-7-6-1]  
Removes all context saved in cookie.  
Check cookies [Menu-7-6-2]  
Check whether a cookie is used or not.  
Security certification [Menu-7-7]  
A list of the available certification is shown.  
Authority  
You can see the list of authority certificates that have  
been stored in your phone.  
Personal  
You can see the list of personal certificates that have  
been stored in your phone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
66  
Games [Menu-8 ]  
You can enjoy a game on the phone. For further details,  
use the onscreen instruction or help menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
67  
Accessories  
There are a variety of accessories available for your  
mobile phone. You can select these according to your  
personal communication requirements. Consult your  
local dealer for availability.  
Note  
Always use genuine LG accessories. Failure to do  
this may invalidate your warranty.  
Accessories may be different in different regions;  
please check with our regional service company  
or agent for further enquiries.  
Battery pack  
Headset  
Allows hands-free operation.  
Includes earpiece and  
microphone.  
Travel Adapter  
This charger allows you to charge  
the battery while away from home  
or your office.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
68  
Technical Data  
General  
Product name : B2050  
System  
: GSM 900 / DCS 1800 / PCS 1900  
Ambient Temperatures  
Max  
Min  
: +55°C  
: -10°C  
Storage  
SMS/MMS(#) : Yes SMS (200) MMS (100)  
Battery  
Standby  
Talktime  
: approx. 200 hours  
: approx. 200 minutes  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B2050 User Guide  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LG Electronics Dishwasher LDS4821WW User Manual
Makita Saw LS1030N User Manual
Makita Trimmer EM4340 User Manual
Manitowoc Ice Surge Protector 4004489 User Manual
Marantz Projector VP 11S1 User Manual
Marshall electronic Musical Instrument Amplifier LR150 User Manual
McCulloch Lawn Mower 250 B User Manual
McCulloch Lawn Mower M155B107HRB User Manual
Mellerware Carpet Cleaner 23810 User Manual
Meyer Sound Home Theater System VX 1 User Manual