OWNER’S MANUAL
LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LCD MONITOR MODEL
IPS225P
IPS235P
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
3
AsseMBLInG AnD PRePARInG
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
Power Cord
CD(owner's Manual) /
Card
D-sUB Cable
(This signal cable may be attached
to this product before shipping out.)
DVI-D Cable
(This cable is not included in all
countries.)
stand Base
Display Quality Assurance Report
CAUtIon
Do not use any unapproved accessories to ensure the safety and product life span.
Any damages or injuries by using unapproved accessories are not covered by the warranty.
y
y
note
The accessories supplied with your product may vary depending on the model.
Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
y
y
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores
(core in the connector) to maintain standard compliance for the product.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
4
Parts and buttons
Power Indicator
Lighting on: turned on
Lighting off: turned off
y
y
(Power Button)
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
5
Button
Description
MENU
osD LoCKeD/
UnLoCKeD
This function allows you to lock the current control settings, so
that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message "OSD
UNLOCKED" should appear.
MODE
DUAL
AUTO
Use this button to enter USER, MOVIE,TEXT,PHOTO,sRGB menus.(See p.19)
Use this button to enter DUAL MONITOR and DUAL WEB menus.(See p.20)
When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only supported in Analog Mode)
the best display mode 1920 x 1080
INPUT
You can choose the input signal.
•ꢀ Whenꢀtwoꢀinputꢀsignalsꢀareꢀconnected,ꢀyouꢀcanꢀselectꢀtheꢀinputꢀsignalꢀ(D-SUB/DVI/ꢀ
HDMI) you want.
•ꢀ Whenꢀonlyꢀoneꢀsignalꢀisꢀconnected,ꢀitꢀisꢀautomaticallyꢀdetected.ꢀTheꢀdefaultꢀsettingꢀisꢀ
D-SUB.
EXIT
Exit the OSD(On Screen Display).
Turns the power on or off.
(Power Button)
Power Indicator
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode, the power
indicator blinks blue.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
6
Detaching the stand Base
setting up the Monitor set
Place the Monitor set with the screen side
down on a flat and cushioned surface.
1
Attaching the stand Base
Place the Monitor set with the screen side
down on a flat and cushioned surface.
1
Turn the screw to the left with a Coin, and then
pull out the stand Base from the stand Body.
2
CAUtIon
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
Attach the stand Base and then tighten the
screw to the right with a Coin.
2
1
tand Base
s
tand Base
s
CAUtIon
This illustration depicts the general model of
connection. Your monitor may differ from the
items shown in the picture.
y
Do not carry the product upside down holding
only the stand base. The product may fall
and get damaged or injure your foot.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
7
Mounting on a table
note
Tilt from +15 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
Lift and tilt the Monitor set into its upright
position on a table.
1
- 5
15
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Rear
Front
SwivelꢀRangeꢀ:ꢀ-45°~45°(+/-ꢀ2°)ꢀꢀ
•
-45°ꢀ~ꢀ45°(+/-ꢀ2°)
Connect the Power Cord to a wall outlet.
2
Height Range : maximum 5.12 inch (130.0 mm)
•
130.0 mm
Press (Power) button on the bottom switch
panel to turn the power on.
3
CAUtIon
* Please be sure to
remove the Locking pin
to adjust the height.
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
8
Using the Kensington security system
WARnInG
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
• When adjusting the angle of
the screen, do not put your
finger(s) in between the head
of the monitor and the stand
body. You can hurt your
finger(s).
Connect the Kensington security system cable
between the Monitor set and a table.
•ꢀ When adjusting the height
of the screen, do not put
your finger(s) in between the
head of the monitor and the
stand base. You can hurt your
finger(s).
WARnInG
• You do not need to replace the Locking pin after
it is removed,to adjust its height.
note
eRGonoMIC
• It is recommended that in order to maintain an
ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not
exceed 5 degrees.
The Kensington security system is optional.
You can obtain it from most electronics stores.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
9
Using the Pivot function
- the pivot function allows you to rotate the screen 90 degrees clockwise.
Lift the monitor to its highest height to utilize the Pivot function.
1.
Landscape & Portrait : You can rotate the panel 90°clockwise.
2.
Please be cautious and avoid contact between the monitor head and the Stand Base when rotating
the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand
Base could crack.
.......
Head section
.....
Stand section
Be careful with the cables when rotating the screen.
3.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
10
Model
Mounting on a wall
IPS225P/IPS235P
VesA (A x B)
standard screw
number of screws
100 x 100
M4
4
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
VESA (A x B)
A
B
10 cm
10 cm
10 cm
10 cm
CAUtIon
Disconnect the power cord first, and then
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.
Use only an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.
y
y
y
y
y
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
Please, Use the screw and wall mount interface
in accordance with VESA Standards.
1
2
3
If you use screw longer than standard, the
monitor might be damaged internally.
If you use improper screw, the product might be
damaged and drop from mounted position. In
this case, LG Electronics is not responsible for
it.
note
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit will include an installation
manual and necessary parts.
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
y
y
y
VESA compatible.
4
5
Please use VESA standard as below.
784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
*ꢀScrewꢀ:ꢀΦꢀ4.0ꢀmmꢀxꢀPitchꢀ0.7ꢀmmꢀxꢀ
Length 10 mm
787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad
and screws.
y
y
y
y
For more information, refer to the
instructions supplied with the wall mount.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET
11
UsInG tHe MonItoR set
DVI-D connection
Connecting to a PC
Transmits a digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with a DVI cable as shown in the following
illustrations.
Your Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
y
D-sUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
HDMI connection
Transmits the digital video and audio signals from
yourꢀPCꢀorꢀA/VꢀtoꢀtheꢀMonitorꢀset.ꢀConnectꢀtheꢀPCꢀ
orꢀA/VꢀandꢀtheꢀMonitorꢀsetꢀwithꢀtheꢀHDMIꢀcableꢀasꢀ
shown in the following illustrations.
note
When using a D-Sub signal input cable
connector for Macintosh
y
Mac adapter
y
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
note
If you use HDMI PC, it can cause compatibility
problem.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET
12
Self Image Setting Function
CAUtIon
Press the power button on the bottom panel to
turn the power on. When monitor power is turned
on, the "self Image setting" Function is executed
automatically. (Only supported in Analog Mode)
Connect the signal
input cable and tighten
it by turning the screws
y
clockwise.
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
y
y
note
note
"self Image setting" Function.
y
y
When you want to use two PC in our Monitor,
pleaseꢀconnectꢀtheꢀsignalꢀcable(D-SUB/
DVI-D/HDMI)ꢀrespectivelyꢀinꢀMonitorꢀset.
If you turn the Monitor set on while it is cold,
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
on the screen. This is normal.
y
This function provides the user with optimal
display settings.When the user connects
the monitor for the first time, this function
automatically adjusts the display to optimal
settings for individual input signals.(Only
supported in Analog Mode)
y
y
‘AUto’ Function.
When you encounter problems such as
blurry screen, blurred letters, screen flicker
or tilted screen while using the device or
after changing screen resolution, press the
AUTO function button to improve resolution.
(Only supported in Analog Mode)
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS
13
CUstoMIZInG settInGs
Accessing the Main Menus
Press any button on the bottom of the Monitor set to display the MonItoR setUP OSD menu.
1
2
3
Press the desired menu item.
Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow ( ) button.
Select eXIt to leave the OSD menu.
4
Monitor set Buttons
MenU (See p.14)
DUAL (See p.20)
eXIt
Sets the screen options.
Sets the screen.
Exits the OSD menu.
MoDe (See p.19)
AUto (See p.12)
InPUt
Sets the mode.
Optimizes the resolution.
Sets the external input.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS
14
Customizing settings
Menu settings
Press any button on the bottom of the Monitor set to display
the MonItoR setUP OSD menu.
1
2
3
4
Press the MenU button to display the options in the OSD
menu.
Set the options by pressing the buttons on the bottom of the
Monitor set.
Select eXIt to leave the OSD menu.
To return to the upper menu or set other menu items, use the
up arrow ( ) button.
The available program settings are described below.
Menu
sub-menu
Analog Digital HDMI
Description
PICtURe BRIGHtness
ContRAst
To adjust the brightness, contrast and sharpness of the
screen
●
●
●
●
sHARPness
BLACK LeVeL
To set offset level
CoLoR
CoLoR teMP
(PReset/UseR)
●
●
●
To customize the color of the screen
GAMMA
CoLoR Reset
DIsPLAY HoRIZontAL
VeRtICAL
●
●
To adjust the position of the screen
CLoCK PHAse
To improve the clarity and stability of the screen
To adjust the volume
oVeRsCAn
VoLUMe
●
●
otHeRs LAnGUAGe
PoWeR InDICAtoR
●
●
●
WHIte BALAnCe
oRIGInAL RAtIo
●
●
To customize the screen status for a user's operating
environment
●
●
●
●
●
●
sUPeR eneRGY
sAVInG
●
●
FACtoRY Reset
Analog: D-SUB(Analog signal) input.
Digital: DVI-D(Digital signal) input.
HDMI: HDMI(Digital signal) input.
y
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS
15
PICtURe
Press any button on the bottom of the Monitor set to display
the MonItoR setUP OSD menu.
1
2
3
4
Press the MenU button to display the options in the OSD
menu.
Select PICtURe by pressing the buttons on the bottom of
the Monitor set and set the options.
Select eXIt to leave the OSD menu.
To return to the upper menu or set other menu items, use
the up arrow ( ) button.
The available picture settings are described below.
Menu
Description
BRIGHtness
ContRAst
To adjust the brightness of the screen.
To adjust the contrast of the screen.
To adjust the clearness of the screen.
sHARPness
BLACK LeVeL
You can set the offset level. If you select'HIGH', the screen will be bright and if you select ‘LOW’,
the screen will be dark. (only for HDMI input)
* Offset?As the criteria for video signal, it is the darkest screen the monitor can show.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS
16
CoLoR
Press any button on the bottom of the Monitor set to
display the MonItoR setUP OSD menu.
1
2
3
4
Press the MenU button to display the options in the OSD
menu.
Select CoLoR by pressing the buttons on the bottom of
the Monitor set and set the options.
Select eXIt to leave the OSD menu.
To return to the upper menu or set other menu items, use
the up arrow ( ) button.
The available picture settings are described below.
Menu
Description
CoLoR teMP
PReset
Select the screen color.
• WARM: Set the screen to warm color temperature (more red).
• MEDIUM: Set the screen to medium color temperature.
• COOL: Set the screen to cool color temperature (more blue).
UseR
• SIX COLOR:
Setsꢀandꢀstoresꢀtheꢀhueꢀandꢀsaturationꢀforꢀsixꢀcolors(RED/ꢀGREEN/BLUE/
CYAN/MAGENTA/YELLOW)ꢀtoꢀsatisfyꢀtheꢀcolorꢀrequirementsꢀofꢀaꢀuser.ꢀꢀꢀꢀ
Adjusts the screen hue.
HUE
Adjusts the color sharpness on the screen. Lower values make
the color sharpness weaker and colors lighter while higher
values make the color sharpness stronger and colors dark.
SATURATION
• RED:
• GREEN:
• BLUE:
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
GAMMA
Setꢀyourꢀownꢀgammaꢀvalue.ꢀ:ꢀ1.8/2.0/2.2/2.4/2.6ꢀOnꢀtheꢀmonitor.ꢀImageꢀisꢀadjustedꢀaccordingꢀtoꢀ
different gamma curve.
CoLoR Reset
Resets the color settings to the factory default settings for the current input device.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS
17
DIsPLAY
Press any button on the bottom of the Monitor set to display
the MonItoR setUP OSD menu.
1
2
3
4
Press the MenU button to display the options in the OSD
menu.
Select DIsPLAY by pressing the buttons on the bottom of
the Monitor set and set the options.
Select eXIt to leave the OSD menu.
To return to the upper menu or set other menu items, use
the up arrow ( ) button.
The available picture settings are described below.
Menu
Description
HoRIZontAL
VeRtICAL
CLoCK
To move image left and right.
To move image up and down.
To minimize any vertical bars or stripes visible on the screen background.The horizontal screen
size will also change.
PHAse
To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or
sharpen the image of characters.
oVeRsCAn
To select the range of output image for DTV timing in HDMI input.(only for HDMI input)Recommend
overscan function to turn on when connect AV equipment.
VoLUMe
Press any button on the bottom of the Monitor set to display
the MonItoR setUP OSD menu.
1
2
3
4
Press the MenU button to display the options in the OSD
menu.
Select VoLUMe by pressing the buttons on the bottom of
the Monitor set and set the options.
Select eXIt to leave the OSD menu.
To return to the upper menu or set other menu items, use
the up arrow ( ) button.
The available picture settings are described below.
Menu
Description
VoLUMe
Toꢀadjustꢀtheꢀvolumeꢀofꢀheadphone/Earphone.(OnlyꢀforꢀHDMIꢀinput)
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS
18
otHeRs
Press any button on the bottom of the Monitor set to display the
MonItoR setUP OSD menu.
1
Press the MenU button to display the options in the OSD menu.
2
3
Select otHeRs by pressing the buttons on the bottom of the
Monitor set and set the options.
Select eXIt to leave the OSD menu.
4
To return to the upper menu or set other menu items, use the up
arrow ( ) button.
The available picture settings are described below.
Menu
Description
LAnGUAGe
To choose the language in which the control names are displayed.
PoWeR
InDICAtoR
Use this function to set the power indicator on the bottom side of the monitor to ON or OFF.If you
set OFF, it will go off.
If you set ON at any time, the power indicator will automatically be turned on.
WHIte
BALAnCe
If the output of the video card is different the required specifications,the color level may deteriorate
due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard
output level of the video card in order to provide the optimal image.Activate this function when
white and black colors are present in the screen.
oRIGInAL RAtIo WIDE
Switch to full screen mode according to input image signal.
ORIGINAL
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio (16:9).
sUPeR eneRGY Sets the SUPER ENERGY SAVING function.
sAVInG
ON
Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function
Disables SUPER ENERGY SAVING.
OFF
RESET
Resets the values of total energy consumption reduction and CO2 emission reduction
estimates.
(Response
Time Compensation)
RtC
If you enable RTC function, you can control Response Time Compensation level.
If you set OFF,you disenable the Response Time Compensation function.
FACtoRY
Reset
Restoreꢀallꢀfactoryꢀdefaultꢀsettingsꢀexcept"LANGUAGE."ꢀPressꢀtheꢀꢀ◄,ꢀ►ꢀbuttonsꢀtoꢀresetꢀ
immediately.
note
totAL PoWeR ReDUCtIon: How much power is saved while using the monitor.
totAL Co2 ReDUCtIon: Change the TOTAL POWER REDUCTION to CO2.
sAVInG DAtA(W/h)
y
y
y
545 mm (21.5 inch) 584 mm (23 inch)
SUPER SAVING
LED SAVING
4ꢀW/h
5ꢀW/h
15ꢀW/h
12ꢀW/h
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.
y
LG calculated these values by using “broadcast video signal”.
LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel.
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
function.
y
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS
19
MoDe setting
Press any button on the bottom of the Monitor set to display the MonItoR setUP OSD menu.
Press the MoDe button to display the options in the OSD menu.
1
2
3
4
Set the options by pressing the buttons on the bottom of the Monitor set.
Select eXIt to leave the OSD menu.
To return to the upper menu or set other menu items, use the up arrow ( ) button.
The available picture settings are described below.
Menu
Description
UseR
MoVIe
teXt
It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.
It is a mode that the screen is adjusted to the best to view the videos.
It is a mode that the screen is adjusted to the best for the text works.
It is a mode that the screen is adjusted to the best to view pictures.
It is a mode that the screen is adjusted to the standard sRGB.
PHoto
sRGB
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS
20
DUAL PACKAGe setting
* Before using below functions, please install DUAL PACKAGE programme.
Press any button on the bottom of the Monitor set to
display the MonItoR setUP OSD menu.
1
2
3
4
Press the DUAL button to display the options in the
OSD menu.
Set the options by pressing the buttons on the bottom
of the Monitor set.
Select eXIt to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
The available picture settings are described below.
Menu
Description
If select OFF,DUALMONITOR off
DUAL MonItoR
OFF
EXTENDED
By selecting EXTENDED,user can use secondary monitor as extended mode of
primary monitor.
CLONE
ON
By selecting CLONE,user can use secondary monitor as done mode of primary
monitor.
DUAL WeB
Help user to browse web efficiently by dividing in half. Help to arrange and
move windows on screen. Help user to control divided windows ratio.
OFF
If select OFF,DUAL WEB is off.
note
When monitor goes to Power Saving Mode with PC power saving option, on pressing any button and
selecting Dual option user can bring back monitor to normal mode.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
21
tRoUBLesHootInG
Check the following before calling for service.
no image appears
Is the power cord of the display
connected?
Check and see if the power cord is connected properly to the power
outlet.
y
Is the power indicator light on?
Press the Power button.
y
y
Is the power on and the power
indicator blue or green?
Adjust the brightness and the contrast.
Is the power indicator flickering?
If the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen.
Try to turn on the PC.
y
y
y
Do you see an "OUT OF RANGE"
message on the screen?
This message appears when the signal from the PC (video card) is
out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
Do you see a "CHECK SIGNAL
CABLE" message on the screen?
This message appears when the signal cable between your PC and
your display is not connected. Check the signal cable and try again.
y
Do you see a "osD LoCKeD" message on the screen?
Do you see “OSD LOCKED” when
you push MENU button?
You can secure the current control settings, so that they cannot be
y
inadvertently changed. You can unlock the OSD controls at any time
by pushing the MENU button for several seconds: the message “OSD
UNLOCKED” will appear.
Display image is incorrect
Display Position is incorrect.
Press the AUto button to automatically adjust your display image to
the ideal setting.
y
y
On the screen background, vertical
bars or stripes are visible.
Press the AUto button to automatically adjust your display image to
the ideal setting.
Any horizontal noise appearing in
any image or characters are not
clearly portrayed.
Press the AUto button to automatically adjust your display image to
the ideal setting.
Check Control Panel ► Display ► Settings and adjust the display
to the recommended resolution or adjust the display image to the
ideal setting. Set the color setting higher than 24 bits (true color).
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
22
CAUtIon
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
changed. If yes, readjust the video card to the recommend resolution.
y
y
y
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
TheꢀsettingꢀmethodꢀcanꢀdifferꢀbyꢀcomputerꢀandꢀO/Sꢀ(OperationꢀSystem),ꢀandꢀresolutionꢀmentionedꢀ
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Display image is incorrect
The screen color is mono or
abnormal.
Check if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
y
Make sure the video card is properly inserted in the slot.
Set the color setting higher than 24 bits (true color) at Control Panel
► settings.
y
y
The screen blinks.
Check if the screen is set to interlace mode and if yes, change it to
the recommend resolution.
y
Do you see an "Unrecognized monitor, Plug&Play (VesA DDC) monitor found" message?
Have you installed the display
driver?
Be sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
y
Make sure to check if the video card supports Plug&Play function.
y
the screen is flickering.
Did you select the recommended
resolution?
If the selected resolution is HDMI 1080iꢀ60/50ꢀHz,ꢀtheꢀscreenꢀmayꢀ
be flickering. Change the resolution to the recommended resolution
1080P.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
23
sPeCIFICAtIons
IPs225P
Display
screen type
54.5 cm (21.5 inch) Flat Panel Active matrix-TFT
LCDAnti-Glare coating
Visible diagonal size: 54.5 cm
Pixel Pitch
0.247 mm x 0.247 mm (Pixel Pitch)
sync Input
Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency
56Hz to 75Hz (D-SUB, DVI-D)
56Hz to 61Hz (HDMI)
Input Form
Separate Sync. Digital
Video Input
signal Input
15ꢀpinꢀD-SUBꢀConnectorꢀ/DVI-DꢀConnectorꢀ(Digital)
HDMI Connector
Input Form
RGBꢀAnalogꢀ(0.7ꢀVp-p/ꢀ75ꢀohm),ꢀDigital
Resolution
Max
D-SUB(Analog) : 1920 x 1080 @ 60 Hz
DVIꢀ/ꢀHDMIꢀ(Digital)ꢀ:ꢀ1920ꢀxꢀ1080ꢀ@ꢀ60ꢀHz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B(Analog,Digital,HDMI)
Power Consumption
On Mode : 31 W(Typ.)
SleepꢀModeꢀ≤ꢀ0.3ꢀWꢀ
OffꢀModeꢀ≤ꢀ0.3ꢀWꢀ
Power Input
ACꢀ100-240ꢀV~ꢀ50ꢀ/ꢀ60ꢀHzꢀ1.0A
Dimensions
With stand
51.3 cm x 51.6 cm x 22.2 cm (Max)
(Width x Height x Depth)
51.3 cm x 38.6 cm x 22.2 cm (Min)
51.3 cm x 31.2 cm x 5.9 cm
Without stand
5.45 kg
tilt
Weight
Range
-5° to 15°
swivel
-45°ꢀ~ꢀ45°(+/-ꢀ2°)
130.0 mm(5.12 inch)
Height
environmental
operating temperature 10°C to 35 °C
conditions
operating Humidity
10 % to 80 %
storage temperature
-20°C to 60 °C
storage Humidity
5 % to 90 % non-Condensing
stand Base
Attached ( ), Detached (O)
Wall-outlet type
Power cord
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
24
sPeCIFICAtIons
IPs235P
Display
screen type
58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 58.4 cm
Pixel Pitch
0.265 mm x 0.265 mm (Pixel Pitch)
sync Input
Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency
56Hz to 75Hz (D-SUB, DVI-D)
56Hz to 61Hz (HDMI)
Input Form
Separate Sync. Digital
Video Input
signal Input
15ꢀpinꢀD-SUBꢀConnectorꢀ/DVI-DꢀConnectorꢀ(Digital)
HDMI Connector
Input Form
RGBꢀAnalogꢀ(0.7ꢀVp-p/ꢀ75ꢀohm),ꢀDigital
Resolution
Max
D-SUB(Analog) : 1920 x 1080 @ 60 Hz
DVIꢀ/ꢀHDMIꢀ(Digital)ꢀ:ꢀ1920ꢀxꢀ1080ꢀ@ꢀ60ꢀHz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B(Analog,Digital,HDMI)
Power Consumption
On Mode : 35 W(Typ.)
SleepꢀModeꢀ≤ꢀ0.3ꢀWꢀ
OffꢀModeꢀ≤ꢀ0.3ꢀWꢀ
Power Input
ACꢀ100-240ꢀV~ꢀ50ꢀ/ꢀ60ꢀHzꢀ1.0ꢀA
Dimensions
With stand
54.7 cm x 51.6 cm x 22.2 cm (Max)
(Width x Height x Depth)
54.7 cm x 38.6 cm x 22.2 cm (Min)
54.7 cm x 33.1 cm x 5.9 cm
Without stand
5.95 kg
tilt
Weight
Range
-5° to 15°
swivel
-45°ꢀ~ꢀ45°(+/-ꢀ2°)
130.0 mm(5.12 inch)
Height
environmental
operating temperature 10°C to 35 °C
conditions
operating Humidity
10 % to 80 %
storage temperature
-20°C to 60 °C
storage Humidity
5 % to 90 % non-Condensing
stand Base
Attached ( ), Detached (O)
Wall-outlet type
Power cord
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
25
Preset Modes (Resolution)
Horizontal
Display Modes (Resolution)
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
70
60
75
60
75
60
75
75
-/+
-/-
-/-
+/+
+/+
-/-
-/-
+/+
1280 x 1024
63.981
60
+/+
1280 x 1024
1680 x 1050
1920 x 1080
79.976
65.290
67.500
75
60
60
+/+
-/+
+/+
Recommend Mode
HDMI tIMInG
Display Modes (Resolution) Horizontal Frequency(kHz)
Vertical Frequency(Hz)
480P
576P
720P
720P
1080i
1080i
1080P
1080P
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
60
50
50
60
50
60
50
60
Recommend Mode
Indicator
Mode
LeD Color
On Mode
Sleep Mode
Off Mode
Blue
Blinking Blue
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE
U. S. A.,Inc. has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
MODEL
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|