LG Electronics Car Video System E1942S User Manual

OWNER’S MANUAL  
LED LCD MONITOR  
Please read this manual carefully before operating  
your set and retain it for future reference.  
LED LCD MONITOR MODEL  
E1942S  
E2042T  
E2042S E2242T  
E2242S E2342T  
E2442T  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
3
ASSEMBLING AND PREPARING  
Unpacking  
Check your product box for the following items. If there are any missing accessories, contact the local  
dealer where you purchased your product. The illustrations in this manual may differ from the actual product  
and accessories.  
DVI-D Cable  
CD(Owner's Manual) /  
Card  
(E2042T/E2242T/E2342T/  
E2442T)  
D-SUB Cable  
(This cable is not included  
in all countries.)  
or  
Power Cord  
AC-DC Adapter  
AC-DC Adapter  
( Depending on the country )  
( Depending on the country )  
Stand Body  
Stand Base  
CAUTION  
Do not use any unapproved accessories to ensure the safety and product life span.  
Any damages or injuries by using unapproved accessories are not covered by the warranty.  
y
y
NOTE  
The accessories supplied with your product may vary depending on the model.  
Product specifications or contents in this manual may be changed without prior notice due to upgrade  
of product functions.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
4
Parts and buttons  
Power Indicator  
Lighting On: Turned on  
Lighting Off: Turned off  
y
y
(Power Button)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
5
Detaching the Stand Base  
Setting up the Monitor set  
Place the Monitor set with the screen side  
down on a flat and cushioned surface.  
Attaching the Stand Base  
1
Place the Monitor set with the screen side  
down on a flat and cushioned surface.  
1
1 Pull out the Stand Body and Stand Base  
from the monitor set.  
2
CAUTION  
2 Turn the screw to the left with a coin.  
3 Pull out the Stand Base.  
Lay a foam mat or soft protective cloth  
on the surface to protect the screen from  
damage.  
1 Attach the Stand Body to the monitor set.  
2
2 Attach the Stand Base.  
Stand Body  
Tighten the screw to the right with a coin.  
3
Stand Body  
Stand Base  
Stand Body  
Stand Base  
Stand Base  
CAUTION  
This illustration depicts the general model of  
connection. Your monitor may differ from the  
items shown in the picture.  
Do not carry the product upside down holding  
only the stand base. The product may fall  
and get damaged or injure your foot.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
6
Press (Power) button on the bottom switch  
panel to turn the power on.  
Mounting on a table  
3
Lift and tilt the Monitor set into its upright  
position on a table.  
1
Leave a 10 cm (minimum) space from the wall  
for proper ventilation.  
CAUTION  
Unplug the power cord before moving the  
Monitor to another location. Otherwise electric  
shock may occur.  
10 cm  
10 cm  
10 cm  
10 cm  
Using the cable holder  
Connect the AC-DC Adapter and Power Cord  
to a wall outlet.  
2
Cable holder  
or  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
7
WARNING  
Using the Kensington security system  
The Kensington security system connector is  
located at the back of the Monitor set. For more  
information of installation and using, refer to the  
manual supplied with the Kensington security  
system or visit http://www.kensington.com.  
When you adjust the angle, do not hold the  
bottom of the Monitor set frame as shown on  
the following illustration, as may injure your  
fingers.  
Connect the Kensington security system cable  
between the Monitor set and a table.  
Do not touch or press the screen when  
adjusting the angle of the monitor.  
Do not hold this set like below picture.Monitor  
screen can detach from stand base and injure  
your body.  
NOTE  
The Kensington security system is optional.  
You can obtain it from most electronics stores.  
NOTE  
Tilt from +20 to -5 degrees up or down to adjust  
the angle of the Monitor set to suit your view.  
Front  
Rear  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
8
Model  
Mounting on a wall  
E1942S E2042T  
E2042S E2242T  
E2242S E2342T  
E2442T  
For proper ventilation, allow a clearance of 10 cm  
on each side and from the wall. Detailed  
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and  
Setup Guide.  
VESA (A x B) 75 x 75  
Standard  
screw  
Number of  
100 x 100  
M4  
4
screws  
10 cm  
CAUTION  
10 cm  
Disconnect the power cord first, and then  
move or install the Monitor set. Otherwise  
electric shock may occur.  
If you install the Monitor set on a ceiling or  
slanted wall, it may fall and result in severe  
injury.  
Use only an authorized LG wall mount  
and contact the local dealer or qualified  
personnel.  
Do not over tighten the screws as this may  
cause damage to the Monitor set and void  
your warranty.  
y
y
y
y
y
10 cm  
10 cm  
Use only screws and wall mounts that  
meet the VESA standard. Any damages  
or injuries by misuse or using an improper  
accessory are not covered by the warranty.  
If you intend to mount the Monitor set to a wall,  
attach Wall mounting interface (optional parts) to  
the back of the set.  
When you install the Monitor set using a wall  
mounting interface (optional parts), attach it  
carefully so it will not drop.  
NOTE  
Use the screws that are listed on the VESA  
standard screw specifications.  
The wall mount kit will include an installation  
manual and necessary parts.  
The wall mount bracket is optional. You can  
obtain additional accessories from your local  
dealer.  
The length of screws may differ depending  
on the wall mount. Be sure to use the proper  
length.  
y
y
y
Please, Use the screw and wall mount interface  
in accordance with VESA Standards.  
1
2
3
If you use screw longer than standard, the  
monitor might be damaged internally.  
If you use improper screw, the product might be  
damaged and drop from mounted position. In  
this case, LG Electronics is not responsible for  
it.  
y
y
VESA compatible.  
4
5
For more information, refer to the  
instructions supplied with the wall mount.  
Please use VESA standard as below.  
784.8 mm (30.9 inch) and under  
* Wall Mount Pad Thickness : 2.6 mm  
* Screw : Φ 4.0 mm x Pitch 0.7 mm x  
Length 10 mm  
y
787.4 mm (31.0 inch) and above  
* Please use VESA standard wall mount pad  
and screws.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MONITOR SET  
9
USING THE MONITOR SET  
NOTE  
Connecting to a PC  
When using a D-Sub signal input cable  
connector for Macintosh  
y
Your Monitor set supports Plug & Play*.  
*Plug & Play: A PC recognizes a connected  
device that users connect to a PC and turn  
on, without device configuration or user  
intervention.  
y
D-SUB connection  
Transmits analog video from your PC to the  
Monitor set. Connect the PC and the Monitor set  
with the supplied D-sub 15 pin signal cable as  
shown in the following illustrations.  
Mac adapter  
y
For Apple Macintosh use, a separate plug  
adapter is needed to change the 15 pin  
high density (3 row) D-SUB VGA connector  
on the supplied cable to a 15 pin 2 row  
connector.  
DVI-D connection  
Transmits a digital video signal from your PC to  
the Monitor set. Connect the PC and the Monitor  
set with a DVI cable as shown in the following  
illustrations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
USING THE MONITOR SET  
10  
Self Image Setting Function  
CAUTION  
Press the power button on the bottom panel to  
turn the power on. When monitor power is turned  
on, the "Self Image Setting" Function is executed  
automatically. (Only supported in Analog Mode)  
Connect the signal  
input cable and tighten  
it by turning the screws  
y
clockwise.  
Do not press the screen with your finger for  
a long time as this may result in temporary  
distortion on the screen.  
Avoid displaying a fixed image on the  
screen for a long period of time to prevent  
image burn. Use a screensaver if possible.  
y
y
NOTE  
NOTE  
"Self Image Setting" Function.  
y
y
When you want to use two PC in our Monitor,  
please connect the signal cable(D-SUB/  
DVI-D) respectively in Monitor set.  
If you turn the Monitor set on while it is cold,  
the screen may flicker. This is normal.  
Some red, green, or blue spots may appear  
on the screen. This is normal.  
y
This function provides the user with optimal  
display settings.When the user connects  
the monitor for the first time, this function  
automatically adjusts the display to optimal  
settings for individual input signals.(Only  
supported in Analog Mode)  
y
y
‘AUTO’ Function.  
When you encounter problems such as  
blurry screen, blurred letters, screen flicker  
or tilted screen while using the device or  
after changing screen resolution, press the  
AUTO function button to improve resolution.  
(Only supported in Analog Mode)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
11  
CUSTOMIZING SETTINGS  
Press the desired button on the bottom of the Monitor set.  
1
2
Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.  
To return to the upper menu or set other menu items, use the up arrow ( ) button.  
Select EXIT to leave the OSD menu.  
3
Monitor set Buttons  
Button  
Description  
OSD LOCKED/  
UNLOCKED  
This function allows you to lock the current control settings, so  
that they cannot be inadvertently changed.  
Press and hold the MENU button for several seconds.  
The message "OSD LOCKED" should appear.  
You can unlock the OSD controls at any time by pushing  
the MENU button for several seconds. The message "OSD  
UNLOCKED" should appear.  
Use this button to enter SUPER ENERGY SAVING menu.For more information.(See p.17)  
(SUPER ENERGY SAVING)  
Use this button to enter CUSTOM, TEXT, PHOTO, CINEMA, GAME menus.(See p.18)  
When adjusting your display settings, always press the AUTO button on the MONITOR  
SETUP OSD. (Only supported in Analog Mode)  
The best display mode E1942S : 1366 x 768  
E2042S / E2042T : 1600 x 900  
E2242S / E2242T / E2342T / E2442T : 1920 x 1080  
You can choose the input signal.  
When two input signals are connected, you can select the input signal (D-SUB/DVI)  
you want.  
When only one signal is connected, it is automatically detected. The default setting is  
D-SUB.  
EXIT  
Exit the OSD(On Screen Display).  
Turns the power on or off.  
(Power Button)  
Power Indicator  
The power indicator stays red if the display is running properly  
(On Mode). If the display is in Sleep Mode, the power indicator  
blinks red.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS  
12  
Customizing Settings  
Menu Settings  
Press MENU button on the bottom of the Monitor set  
to display the MENU OSD.  
1
2
3
4
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select the "NEXT MENU" button to enter the more  
option settings.  
Select EXIT to leave the OSD menu.  
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
MENU  
Analog Digital  
Description  
BRIGHTNESS  
CONTRAST  
To adjust the brightness, contrast of the screen  
WIDE/ORIGINAL  
WIDE  
Switch to full screen mode according to input image signal.  
ORIGINAL  
Change the input image signal ratio to original.  
* This function works only if input resolution is lower than Monitor set ratio (16:9).  
RESET  
Restore all factory default settings. Press the  
,
buttons to reset immediately.  
►  
MENU > NEXT MENU  
Analog Digital  
Description  
PICTURE  
SHARPNESS  
To adjust the clearness of the screen .  
To customize the color of the screen  
COLOR  
GAMMA  
COLOR TEMP  
HORIZONTAL  
VERTICAL  
CLOCK  
DISPLAY  
To adjust the position of the screen  
To improve the clarity and stability of the screen  
PHASE  
OTHERS  
LANGUAGE  
To customize the screen status for a user's operating  
environment  
POWER INDICATOR  
WHITE BALANCE  
Analog: D-SUB(Analog signal) input.  
Digital: DVI-D(Digital signal) input.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS  
13  
PICTURE  
Press MENU button on the bottom of the Monitor set  
to display the MENU OSD.  
1
2
Select the "NEXT MENU" button to enter the more  
option settings.  
Enter to PICTURE by pressing the ▼ button.  
3
4
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select EXIT to leave the OSD menu.  
5
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
MENU > NEXT MENU > PICTURE  
SHARPNESS  
Description  
To adjust the clearness of the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
14  
COLOR  
Press MENU button on the bottom of the Monitor set  
to display the MENU OSD.  
1
2
Select the "NEXT MENU" button to enter the more  
option settings.  
Select COLOR by pressing the ► button.  
3
4
5
Enter to COLOR by pressing the ▼ button.  
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select EXIT to leave the OSD menu.  
6
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
MENU > NEXT MENU > COLOR  
GAMMA  
Description  
Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor,  
high gamma values display whitish images and low gamma values display  
blackish images.  
COLOR TEMP  
CUSTOM  
• RED:Set your own red color levels.  
• GREEN: Set your own green color levels.  
• BLUE:Set your own blue color levels.  
Select the screen color.  
WARM: Set the screen to warm color temperature (more red).  
MEDIUM: Set the screen to medium color temperature.  
COOL: Set the screen to cool color temperature (more blue).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
15  
DISPLAY  
Press MENU button on the bottom of the Monitor set  
to display the MENU OSD.  
1
2
Select the "NEXT MENU" button to enter the more  
option settings.  
Select DISPLAY by pressing the ► button.  
3
4
5
Enter to DISPLAY by pressing the ▼ button.  
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select EXIT to leave the OSD menu.  
6
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
MENU > NEXT MENU > DISPLAY  
HORIZONTAL  
Description  
To move image left and right.  
To move image up and down.  
VERTICAL  
CLOCK  
To minimize any vertical bars or stripes visible on the screen background.The  
horizontal screen size will also change.  
PHASE  
To adjust the focus of the display. This item allows you to remove any horizontal  
noise and clear or sharpen the image of characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
16  
OTHERS  
Press MENU button on the bottom of the Monitor set  
to display the MENU OSD.  
1
2
Select the "NEXT MENU" button to enter the more  
option settings.  
Select OTHERS by pressing the ► button.  
3
4
5
Enter to OTHERS by pressing the ▼ button.  
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select EXIT to leave the OSD menu.  
6
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
MENU > NEXT MENU > OTHERS  
LANGUAGE  
Description  
To choose the language in which the control names are displayed.  
POWER  
INDICATOR  
Use this function to set the power indicator on the bottom side of the monitor to  
ON or OFF.If you set OFF, it will go off.  
If you set ON at any time, the power indicator will automatically be turned on.  
WHITE  
BALANCE  
If the output of the video card is different the required specifications,the color  
level may deteriorate due to video signal distortion. Using this function, the  
signal level is adjusted to fit into the standard output level of the video card in  
order to provide the optimal image.Activate this function when white and black  
colors are present in the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
17  
SUPER ENERGY SAVING Setting  
Press  
( SUPER ENERGY SAVING ) button on  
1
the bottom of the Monitor set to display the SUPER  
ENERGY SAVING OSD.  
Set the options by pressing the ◄ or ► or ▼ buttons.  
2
3
Select EXIT to leave the OSD menu.  
Each option is explained below.  
SUPER ENERGY SAVING  
Description  
ON  
Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function  
Disables SUPER ENERGY SAVING.  
OFF  
RESET  
Resets the values of total energy consumption reduction and CO2 emission reduction  
estimates.  
NOTE  
TOTAL POWER REDUCTION: How much power is saved while using the monitor.  
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.  
SAVING DATA(W/h)  
y
y
y
470 mm  
(18.5 inch) (20 inch) (21.5 inch) (23 inch) (24 inch)  
4 W/h 5 W/h 6 W/h 7 W/h 7 W/h  
508 mm  
546 mm  
584 mm  
609 mm  
SUPER SAVING  
Saving Data depends on the Panel. So,those values should be different from each panel and panel  
vendor.  
LG calculated these values by using “broadcast video signal”  
(including broadcast video: IEC 62087)  
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING  
function.  
y
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS  
18  
PICTURE MODE Setting  
Press MODE button on the bottom of the Monitor set to display the PICTURE MODE OSD .  
Set the options by pressing the ◄ or ► or ▼ buttons.  
1
2
3
Select EXIT to leave the OSD menu.  
Each option is explained below.  
PICTURE MODE  
Description  
CUSTOM  
TEXT  
It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.  
It is a mode that the screen is adjusted to the best for the text works.  
It is a mode that the screen is adjusted to the best to view pictures.  
PHOTO  
CINEMA  
GAME  
It is a mode that the screen is adjusted to the best to view the videos.  
It is a mode that the screen is adjusted to the best to play a game.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TROUBLESHOOTING  
19  
TROUBLESHOOTING  
Check the following before calling for service.  
No image appears  
Is the power cord of the display  
connected?  
Check and see if the power cord is connected properly to the power  
outlet.  
y
Is the power indicator light on?  
Press the Power button.  
y
y
Is the power on and the power  
indicator Red?  
Adjust the brightness and the contrast.  
Is the power indicator flickering?  
If the display is in power saving mode, try moving the mouse or  
pressing any key on the keyboard to bring up the screen.  
Try to turn on the PC.  
y
y
y
Do you see an "OUT OF RANGE"  
message on the screen?  
This message appears when the signal from the PC (video card) is  
out of horizontal or vertical frequency range of the display. See the  
'Specifications' section of this manual and configure your display  
again.  
Do you see a "NO SIGNAL"  
message on the screen?  
When the monitor is on "No-Signal" in 5 minutes, the monitor goes to  
DPM mode.  
y
Do you see a "OSD LOCKED" message on the screen?  
Do you see “OSD LOCKED” when  
you push MENU button?  
You can secure the current control settings, so that they cannot be  
inadvertently changed. You can unlock the OSD controls at any time  
by pushing the MENU button for several seconds: the message “OSD  
UNLOCKED” will appear.  
y
Display image is incorrect  
Display Position is incorrect.  
Press the AUTO button to automatically adjust your display image to  
the ideal setting.  
y
y
On the screen background, vertical  
bars or stripes are visible.  
Press the AUTO button to automatically adjust your display image to  
the ideal setting.  
Any horizontal noise appearing in  
any image or characters are not  
clearly portrayed.  
Press the AUTO button to automatically adjust your display image to  
the ideal setting.  
Check Control Panel ► Display ► Settings and adjust the display  
to the recommended resolution or adjust the display image to the ideal  
setting. Set the color setting higher than 24 bits (true color).  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
20  
CAUTION  
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were  
changed. If yes, readjust the video card to the recommend resolution.  
y
y
y
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the  
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.  
The setting method can differ by computer and O/S (Operation System), and resolution mentioned  
above may not be supported by the video card performance. In this case, please ask to the computer  
or the video card manufacturer.  
Display image is incorrect  
The screen color is mono or  
abnormal.  
Check if the signal cable is properly connected and use a screwdriver  
to fasten if necessary.  
y
Make sure the video card is properly inserted in the slot.  
Set the color setting higher than 24 bits (true color) at Control Panel  
Settings.  
y
y
The screen blinks.  
Check if the screen is set to interlace mode and if yes, change it to the  
recommend resolution.  
y
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?  
Have you installed the display  
driver?  
Be sure to install the display driver from the display driver CD (or  
diskette) that comes with your display. Or, you can also download the  
y
Make sure to check if the video card supports Plug&Play function.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
21  
SPECIFICATIONS  
E1942S  
Display  
Screen Type  
Pixel Pitch  
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCDAnti-  
Glare coating  
Visible diagonal size: 47.0 cm  
0.3 mm x 0.3 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 61 kHz (Automatic)  
Vertical Frequency  
Input Form  
56Hz to 75Hz (D-SUB)  
Separate Sync.  
Video Input  
Resolution  
Plug & Play  
Signal Input  
Input Form  
15 pin D-SUB Connector  
RGB Analog (0.7 Vp-p/ 75 ohm)  
D-SUB(Analog) : 1366 x 768 @ 60 Hz  
VESA 1366 x 768 @ 60 Hz  
Max  
Recommend  
DDC 2B(Analog)  
Power  
Consumption  
On Mode : 15 W(Typ.)  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
19 V  
1.2 A  
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
AC-DC Adapter  
OUTPUT: 19 V  
With Stand  
1.3 A  
Dimensions  
(Width x Height x  
Depth)  
44.1 cm x 34.9 cm x 16.8 cm  
44.1 cm x 27.5 cm x 5.5 cm  
Without Stand  
Weight  
2.1 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
22  
SPECIFICATIONS  
E2042S  
Display  
Screen Type  
Pixel Pitch  
50.8 cm (20 inch) Flat Panel Active matrix-TFT LCDAnti-  
Glare coating  
Visible diagonal size: 50.8 cm  
0.276 mm x 0.276 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
56Hz to 75Hz (D-SUB)  
Separate Sync.  
Video Input  
Resolution  
Plug & Play  
Signal Input  
Input Form  
15 pin D-SUB Connector  
RGB Analog (0.7 Vp-p/ 75 ohm)  
D-SUB(Analog) : 1600 x 900 @ 60 Hz  
VESA 1600 x 900 @ 60 Hz  
Max  
Recommend  
DDC 2B(Analog)  
Power  
Consumption  
On Mode : 20 W(Typ.)  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
19 V  
1.2 A  
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
AC-DC Adapter  
OUTPUT: 19 V  
With Stand  
1.3 A  
Dimensions  
(Width x Height x  
Depth)  
47.4 cm x 36.6 cm x 16.8 cm  
47.4 cm x 29.2 cm x 5.5 cm  
Without Stand  
Weight  
2.3 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
23  
SPECIFICATIONS  
E2042T  
Display  
Screen Type  
Pixel Pitch  
50.8 cm (20 inch) Flat Panel Active matrix-TFT LCDAnti-  
Glare coating  
Visible diagonal size: 50.8 cm  
0.276 mm x 0.276 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
Signal Input  
Input Form  
Max  
56Hz to 75Hz (D-SUB, DVI-D)  
Separate Sync. Digital  
Video Input  
Resolution  
15 pin D-SUB Connector /DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm),Digital  
D-SUB(Analog) : 1600 x 900 @ 60 Hz  
DVI (Digital) : 1600 x 900 @ 60 Hz  
Recommend  
VESA 1600 x 900 @ 60 Hz  
Plug & Play  
DDC 2B(Analog,Digital)  
Power  
Consumption  
On Mode : 20 W(Typ.)  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
19 V  
1.2 A  
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
AC-DC Adapter  
OUTPUT: 19 V  
With Stand  
1.3 A  
Dimensions  
(Width x Height x  
Depth)  
47.4 cm x 36.6 cm x 16.8 cm  
47.4 cm x 29.2 cm x 5.5 cm  
Without Stand  
Weight  
2.3 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
24  
SPECIFICATIONS  
E2242S  
Display  
Screen Type  
Pixel Pitch  
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-  
Glare coating  
Visible diagonal size: 54.6 cm  
0.247 mm x 0.247 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
56Hz to 75Hz (D-SUB)  
Separate Sync.  
Video Input  
Resolution  
Plug & Play  
Signal Input  
Input Form  
15 pin D-SUB Connector  
RGB Analog (0.7 Vp-p/ 75 ohm)  
D-SUB(Analog) : 1920 x 1080 @ 60 Hz  
VESA 1920 x 1080 @ 60 Hz  
Max  
Recommend  
DDC 2B(Analog)  
Power  
Consumption  
On Mode : 23 W(Typ.)  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
19 V  
1.2 A  
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
AC-DC Adapter  
OUTPUT: 19 V  
With Stand  
1.3 A  
Dimensions  
(Width x Height x  
Depth)  
50.9 cm x 38.7 cm x 18.1 cm  
50.9 cm x 31.3 cm x 5.5 cm  
Without Stand  
Weight  
2.6 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
25  
SPECIFICATIONS  
E2242T  
Display  
Screen Type  
Pixel Pitch  
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-  
Glare coating  
Visible diagonal size: 54.6 cm  
0.247 mm x 0.247 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
Signal Input  
Input Form  
Max  
56Hz to 75Hz (D-SUB, DVI-D)  
Separate Sync. Digital  
Video Input  
Resolution  
15 pin D-SUB Connector /DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
D-SUB(Analog) : 1920 x 1080 @ 60 Hz  
DVI (Digital) : 1920 x 1080 @ 60 Hz  
Recommend  
VESA 1920 x 1080 @ 60 Hz  
Plug & Play  
DDC 2B(Analog,Digital)  
Power  
Consumption  
On Mode : 23 W(Typ.)  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
19 V  
1.2 A  
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
AC-DC Adapter  
OUTPUT: 19 V  
With Stand  
1.3 A  
Dimensions  
(Width x Height x  
Depth)  
50.9 cm x 38.7 cm x 18.1 cm  
50.9 cm x 31.3 cm x 5.5 cm  
Without Stand  
Weight  
2.6 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
26  
SPECIFICATIONS  
E2342T  
Display  
Screen Type  
58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-  
Glare coating  
Visible diagonal size: 58.4 cm  
Pixel Pitch  
0.265 mm x 0.265 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
Signal Input  
Input Form  
Max  
56Hz to 75Hz (D-SUB, DVI-D)  
Separate Sync. Digital  
Video Input  
Resolution  
15 pin D-SUB Connector /DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
D-SUB(Analog) : 1920 x 1080 @ 60 Hz  
DVI (Digital) : 1920 x 1080 @ 60 Hz  
Recommend  
VESA 1920 x 1080 @ 60 Hz  
Plug & Play  
DDC 2B(Analog,Digital)  
Power  
Consumption  
On Mode : 24 W(Typ.)  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
19 V  
1.3 A  
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
AC-DC Adapter  
OUTPUT: 19 V  
1.7 A  
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
OUTPUT: 19 V  
With Stand  
1.3 A  
Dimensions  
(Width x Height x  
Depth)  
54.4 cm x 40.6 cm x 18.1 cm  
54.4 cm x 33.2 cm x 5.5 cm  
Without Stand  
Weight  
2.9 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
27  
SPECIFICATIONS  
E2442T  
Display  
Screen Type  
Pixel Pitch  
60.9 cm (24 inch) Flat Panel Active matrix-TFT LCDAnti-  
Glare coating  
Visible diagonal size: 60.9 cm  
0.277 mm x 0.277 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
Signal Input  
Input Form  
Max  
56Hz to 75Hz (D-SUB, DVI-D)  
Separate Sync. Digital  
Video Input  
Resolution  
15 pin D-SUB Connector /DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
D-SUB(Analog) : 1920 x 1080 @ 60 Hz  
DVI (Digital) : 1920 x 1080 @ 60 Hz  
Recommend  
VESA 1920 x 1080 @ 60 Hz  
Plug & Play  
DDC 2B(Analog,Digital)  
Power  
Consumption  
On Mode : 25 W(Typ.)  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
19 V  
1.6 A  
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC  
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE  
AC-DC Adapter  
OUTPUT: 19 V  
With Stand  
1.7 A  
Dimensions  
(Width x Height x  
Depth)  
56.7 cm x 41.8 cm x 18.1 cm  
56.7 cm x 34.3 cm x 5.5 cm  
Without Stand  
Weight  
3.6 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
28  
Preset Modes (Resolution)  
E1942S  
Horizontal  
Display Modes (Resolution)  
Frequency(kHz)  
Vertical  
Frequency(Hz)  
Polarity(H/V)  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
31.468  
31.469  
37.500  
37.879  
46.875  
70  
60  
75  
60  
75  
-/+  
-/-  
-/-  
+/+  
+/+  
832 x 624  
49.725  
75  
-/-  
1024 x 768  
1024 x 768  
1366 x 768  
48.363  
60.123  
47.712  
60  
75  
60  
-/-  
+/+  
+/+  
Recommend Mode  
E2042S/E2042T  
Horizontal  
Frequency(kHz)  
Vertical  
Frequency(Hz)  
Display Modes (Resolution)  
Polarity(H/V)  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
1600 x 900  
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.123  
67.500  
60.000  
70  
60  
75  
60  
75  
60  
75  
75  
60  
-/+  
-/-  
-/-  
+/+  
+/+  
-/-  
+/+  
+/+  
+/+  
Recommend Mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
29  
Preset Modes (Resolution)  
E2242S/E2242T/E2342T/E2442T  
Horizontal  
Frequency(kHz)  
Vertical  
Frequency(Hz)  
Display Modes (Resolution)  
Polarity(H/V)  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.023  
67.500  
70  
60  
75  
60  
75  
60  
75  
75  
-/+  
-/-  
-/-  
+/+  
+/+  
-/-  
+/+  
+/+  
1280 x 1024  
63.981  
60  
+/+  
1280 x 1024  
1680 x 1050  
1920 x 1080  
79.976  
65.290  
67.500  
75  
60  
60  
+/+  
-/+  
+/+  
Recommend Mode  
Indicator  
Mode  
LED Color  
Red  
On Mode  
Sleep Mode  
Off Mode  
Blinking Red  
Off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROPER POSTURE  
30  
PROPER POSTURE  
Proper posture for using the Monitor set.  
Adjust the  
Monitor set and  
your posture to  
allow you to view  
images at the  
optimal viewing  
angle.  
Adjust the location of the  
Monitor set to avoid it  
reflecting light.  
Place your hands  
gently on the  
keyboard, keeping  
your arms bent at  
the elbows and  
horizontally outright.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Make sure to read the Safety Precautions before  
using the product.  
Keep the Owner’s Manual (CD) in an accessible  
place for future reference.  
The model and serial number of the SET is  
located on the back and one side of the SET.  
Record it below should you ever need service.  
ENERGY STAR is a set of power-saving  
guidelines issued by the U.S.Environmental  
Protection Agency(EPA).  
As an ENERGY STAR Partner LGE  
U. S. A.,Inc. has determined that this  
product meets the ENERGY STAR  
guidelines for energy efficiency.  
MODEL  
SERIAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Indoor Furnishings Z535390000 User Manual
LaCie Computer Drive 2big Quadra User Manual
Land Rover Automobile LR3 User Manual
LG Electronics Dishwasher LDS 5811WW User Manual
Liebert Network Card FS 8704 02 User Manual
Magic Chef Refrigerator MCBR460S User Manual
Makita Cordless Drill 6041DW User Manual
Marmitek Marine Radio um7206 User Manual
Marshall electronic Computer Monitor V R151PV R151P User Manual
Meade VCR mySKY Plus User Manual