OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
42WL10MS
47WL10MS
Download from Www.Somanuals.com. All Manuals Search And Download.
2
TABLE OF CONTENTS
CONTENTS
4
5
LICENSES
22 ENTERTAINMENT
22
23
24
25
27
30
33
35
36
37
- Connecting to a wired network
- Network Status
ASSEMBLING AND
PREPARING
- Connecting USB storage devices
- Browsing files
5
Accessories
- Viewing movies
6
Optional Accessories
Parts and buttons
- Viewing photos
7
- Listening to music
8
Connecting the stand
Connecting the speaker
Using the Mounting Cable Tie
Using the IR Receiver
Portrait Layout
- Viewing the Contents List
- DivX® VOD Guide
- Using PIP/PBP
8
9
9
10
11
38 CUSTOMIZING SETTINGS
Mounting on a wall
38
39
42
43
44
48
49
Accessing main menus
- PICTURE settings
- AUDIO settings
- TIME settings
12 REMOTE CONTROL
- OPTION settings
- Picture ID
14 USING THE MONITOR SET
14
14
15
15
16
17
17
17
18
18
18
19
19
19
20
Connecting to a PC
- NETWORK settings
- RGB connection
- DVI connection
50 MAKING CONNECTIONS
51
- HDMI connection
- IR Receiver connection
Adjusting the screen
Connecting to a HD receiver, DVD,
Camcorder, Camera, Gaming Device or
VCR player
- Selecting an image mode
- Customizing image options
- Customizing PC display options
Adjusting the sound
51
51
52
52
52
53
53
- DVI connection
- HDMI connection
- Component connection
Connecting to the LAN
Connecting to a USB
Daisy Chain Monitors
- DVI Cable
- Selecting an sound mode
- Customizing sound options
Using additional options
- Using the input list
- Adjusting aspect ratio
54 TROUBLESHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
LICENSES
3
57 SPECIFICATIONS
64 IR CODES
65 CONTROLLING THE MULTIPLE
PRODUCT
65
65
65
66
68
Connecting the cable
RS-232C Configurations
Communication Parameter
Command reference list
Transmission / Receiving protocol
Download from Www.Somanuals.com. All Manuals Search And Download.
4
LICENSES
LICENSES
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
5
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
MONITOR
ON
OFF
ENERGY INPUT
SAVING
ꢀ
ꢃ
.
,
!
ꢁ
ABC
JKL
TUV
ꢂ
ꢅ
ꢈ
DEF
GHI
ꢄ
ꢇ
ꢉ
MNO
WXYZ
ꢆ
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
S.MENU
MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
Remote control and Batteries
Power Cord
IR Receiver
CD(Owner's Manual,
SuperSign Program/ Manual)/
Cards
D-sub 15 pin signal cable
Mounting Cable Tie
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ASSEMBLING AND PREPARING
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
ST-200T
Stand
SP-2000
Speaker
Cable holder/
Cable Tie
Screws
Screws
Diameter 4.0 mm x Pitch 0.7 mm x
Length 10 mm(Included Spring Washer)
Diameter 4.0 mm x Pitch 0.7 mm x
Length 8 mm(Included Spring Washer)
Stand kit
Speaker kit
NOTE
Cable holder/Cable tie may not be available in some areas or for some models.
yy
Optional accessories are not included for all models.
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
7
Parts and buttons
Screen Buttons/ Screen Marks
Connection panel
Screen Marks
Description
INPUT
MENU
Changes the input source.
Accesses the main menus, or saves your input and exits the menus.
Moves the selection up and down.
Adjusts the volume level.
AUTO/SET
Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
Turns the power on or off.
/ I
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ASSEMBLING AND PREPARING
Connecting the stand
Connecting the speaker
- Only on some models.
- Only on some models.
Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the input signal cable to the Monitor
before installing the speakers. Use a cable tie
to organize the cables.
1
1
Mount the speaker by using a screw as shown
in the following.
2
Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
2
Then connect the speaker cable. After installing
your speakers, use holders and cable ties to
organize the speaker cables.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
9
Using the Mounting Cable
Tie
Using the IR Receiver
This allows a remote control sensor to be placed in
a custom location.
First, connect the input signal cable to be used.
Insert the cable tie into the bottom hole on the back
as shown in the figure to organize cables.
42WL10MS
IR Receiver
NOTE
The IR receiver is made with a magnet. If it
yy
is attached to the side or the bottom of the
product, external shocks may cause the IR
receiver to fall. It is recommended to attach it
to the back of the product.
47WL10MS
Download from Www.Somanuals.com. All Manuals Search And Download.
10 ASSEMBLING AND PREPARING
Using the Kensington security system
Portrait Layout
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
To install in portrait mode, rotate the set
counterclockwise 90 degrees when looking at from
the front.
Connect the Kensington security system cable
between the Monitor set and a table.
NOTE
The Kensington security system is optional.
yy
You can obtain additional accessories from
most electronics stores.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING 11
Mounting on a wall
CAUTION
Disconnect the power cord first, and then
yy
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury.
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
Use an authorized LG wall mount and
yy
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void
your warranty.
10 cm
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
10 cm
10 cm
10 cm
10 cm
NOTE
If you intend to mount the Monitor to a wall, attach
a Wall mounting interface (optional parts) to the
back of the set.
Use the screws that are listed on the VESA
yy
standard screw specifications.
When you install the Monitor using a wall mounting
interface (optional parts), attach it carefully so it
will not fall.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
Please, use a wall mount and screws in
accordance with VESA Standards.
1
2
3
The length of screws may differ depending
yy
If you use screws longer than standard, the
monitor might be damaged internally.
on the wall mount. Be sure to use the proper
length.
If you use improper screws, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for damage.
For more information, refer to the instructions
yy
supplied with the wall mount.
Please use VESA standard as below.
4
785mm(31 inch) or greater
yy
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
12 REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the Monitor set.
POWER
MONITOR
ENERGY INPUT
SAVING
ON
OFF
1
4
.
,
!
2
ABC
JKL
TUV
3
6
9
DEF
GHI
5
8
0
MNO
WXYZ
7
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
MENU
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
(POWER)
ENERGY SAVING(
)
Turns the Monitor set on or off.
Adjusts the brightness of
the screen to reduce energy
consumption.
POWER
MONITOR ON / OFF
Turn off the monitor and then
turn it back on.
INPUT
Selects the input mode.
MONITOR
ENERGY INPUT
SAVING
OFF
ON
1/a/A Button
Toggles between numerical
and alphabetical.
ꢀ. , ! ꢁABC ꢂDEF
ꢃGHI ꢄJKL ꢅMNO
Number and Alphabet buttons
Enters numerical or alphabetical
characters depending on the
setting.
ARC
Selects the Aspect Ratio
Mode.
MARK
Selects a specific file in the
USB mode.
ꢆ ꢇTUV ꢈWXYZ
PQRS
CLEAR
Deletes the entered numerical
or alphabetical character.
1/a/A
CLEAR
ꢉ- * #
MARK
ARC
P
A
G
E
BRIGHT
NESS
Volume Up / Down
Adjusts the volume level.
PSM
MUTE
BRIGHTNESS Key
PSM
Selects the Picture Status
Mode.
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to
move to the next file list.
AUTO
MENU
MUTE
Mutes all sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 13
POWER
MONITOR
ON
OFF
ENERGY INPUT
SAVING
1
4
.
,
!
2
ABC
JKL
TUV
3
6
9
DEF
GHI
5
8
0
MNO
WXYZ
7
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
MENU
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
MENU (See p.38)
Accesses the main menus
or saves your input and exit
menus.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
Navigation buttons
Scrolls through menus or
options.
NESS
E
MUTE
AUTO
S.MENU
MENU
S.MENU
OK
Selects menus or options and
confirms your input.
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
Allows the user to move back
one step in user interaction
function.
EXIT
BACK
EXIT
TILE
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
ID
ON
OFF
TILE
Selects the TILE Mode.
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
USB Menu control buttons
Controls media playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 USING THE MONITOR
USING THE MONITOR SET
RGB connection
Connecting to a PC
Transmits an analog video signal from your PC to
the Monitor. Connect the PC and the Monitor with
the 15 pin signal cable as shown an following
illustration.
Your Monitor supports the Plug & Play* feature.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
Select RGB input.
Back of the product.
NOTE
(not included)
It is recommended you use an HDMI
yy
connection for the best image quality.
Use a shielded signal interface cable, such
yy
as D-sub 15 pin signal cable and DVI/HDMI
cable, with a ferrite core to maintain standard
compliance for the product.
If you turn the Monitor set on when the set is
yy
cold, the screen may flicker. This is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
If you use a cable longer than the D-sub 15
yy
pin signal cable provided, certain images
may appear blurry.
PC/MAC
Macintosh Adapter
(not included)
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
NOTE
Use the standard
yy
Macintosh adapter since
an incompatible adapter
is available in the market.
(Different signaling system)
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
yy
for a long period of time to prevent image
burn. Use a screensaver if possible.
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 15
DVI connection
HDMI connection
Transmits an digital video signal from your PC to
the Monitor. Connect the PC and the Monitor with
a DVI cable as shown the following illustration.
Select DVI input.
Transmits the digital video and audio signals
from your PC to the Monitor. Connect the PC and
the Monitor with an HDMI cable as shown in the
following illustration.
Select HDMI input.
Back of the product.
Back of the product.
(not included)
(not included)
PC
(not included)
PC
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear audio in HDMI mode. Some PCs
require you to manually change the default
audio output to HDMI.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
When HDMI PC is used, a compatiblity
yy
problem might occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 USING THE MONITOR
IR Receiver connection
Allows the use of a wired remote or IR receiver
extension.
Back of the product.
NOTE
Make sure the power cable is disconnected.
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 17
Customizing image options
Adjusting the screen
Customize basic and advanced options of each
image mode for the best screen performance.
Selecting an image mode
Display images in its optimized settings by
selecting one of the preset image modes.
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
PICTURE and press OK.
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
PICTURE and press OK.
Press the Navigation buttons to scroll to
Picture Mode and press OK.
3
4
5
Press the Navigation buttons to scroll to
Picture Mode and press OK.
3
4
Press the Navigation buttons to scroll to an
image mode you want and press OK.
Press the Navigation buttons to scroll to an
image mode you want and press OK.
Select and adjust following options, and then
press OK.
Mode
Vivid
Description
Option
Description
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, Color, and sharpness.
Backlight
Adjusts the brightness of the screen
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Standard
Cinema
Adjusts the image for the normal
environment.
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
picture is saturated.
Sport
Game
Optimizes the video image for high and
dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Brightness
Sharpness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark part of the picture is
saturated.
Optimizes the video image for a fast
gaming screen such as PCs or games.
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Color
Tint
Adjusts intensity of all colors.
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Control
Customizes the advanced options.
Refer to the Advanced image options.
Picture Reset Restores the options to the default
setting.
When you are finished, press EXIT.
6
When you return to the previous menu, press
BACK.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 USING THE MONITOR
Customizing PC display options
Adjusting the sound
Customize options of each image mode for the
best image quality.
Selecting an sound mode
Play the sound in its optimized settings by
selecting one of the preset sound modes.
This function works in the following mode:
yy
RGB[PC] mode.
Press MENU to access the main menus.
1
2
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
AUDIO and press OK.
Press the Navigation buttons to scroll to
PICTURE and press OK.
Press the Navigation buttons to scroll to Sound
Mode and press OK.
3
4
Press the Navigation buttons to scroll to
Screen and press OK.
3
4
Press the Navigation buttons to scroll to a
sound mode you want and press OK.
Select and adjust following options, and then
press OK.
Option
Description
Mode
Description
Resolution Selects a proper resolution. See
Standard
Select when you want standard-quality
sound.
“Customizing PC display options”.
Auto
Sets to adjust the screen position, clock,
and phase automatically.
Music
Cinema
Sports
Game
Select when you listen to music.
Select when you watch movies.
Config.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Select when you watch sports events.
Select when you watch sports events.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
When you are finished, press EXIT.
5
shaky, after the auto configuration.
When you return to the previous menu, press
BACK.
Reset
Restores the options to the default
setting.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 19
Customizing sound options
Using additional options
Customize options of each sound mode for the
best sound quality.
Using the input list
Press MENU to access the main menus.
1
2
Selecting an input source
Press the Navigation buttons to scroll to
AUDIO and press OK.
Press INPUT to access the input source list.
1
2
Press the Navigation buttons to scroll to one of
the input sources and press OK.
Press the Navigation buttons to scroll to Sound
Mode and press OK.
3
4
5
Press the Navigation buttons to scroll to a
sound mode you want and press OK.
Input source
Description
Select and adjust following options, and then
press OK.
Component Watch the contents in a DVD or
other extemal devices, or through a
digital set-top box
RGB
View a PC display on the screen
HDMI
Watch contents in a PC, DVD
of Digital set-top box other high
definition devices
Option
Infinite
Description
LG's Infinity Sound option provides
5.1 channel stereo sound from two
speakers.
DVI
Watch contents in a PC, DVD
of Digital set-top box other high
definition devices
Sound
Treble
Controls the dominant sounds in the
output. When you turn up the treble,
it will increase the output to the lower
frequency range.
USB
Plays the multimedia file saved in
the USB.
Bass
Makes the output sound softer. If the
bass is increased, the frequency of the
output also increases.
Reset
Resets the sound mode to the default
setting.
When you are finished, press EXIT.
6
When you return to the previous menu, press
BACK.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 USING THE MONITOR
Adjusting aspect ratio
Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set.
CAUTION
If a fixed image displays on the screen for a long period of time, it will be imprinted and become a
yy
permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the
warranty.
To prevent image sticking, do not play a still image for more than two hours.
yy
If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area
yy
of the screen.
NOTE
You can also change the image size by accessing the main menus.
yy
The Just Scan mode operates when a video signal has resolution of 720p or higher.
yy
MODE
Component
RGB
DVI
HDMI
ARC
PC
o
DTV
PC
o
DTV
PC
o
16:9
o
o
x
o
o
o
o
o
x
o
o
o
o
o
x
o
o
o
Just Scan
1:1
x
x
x
o
o
o
4:3
o
o
o
Zoom
x
x
x
Cinema Zoom
x
x
x
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 21
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC, DVI
PC, RGB PC)
- Cinema Zoom : Choose Cinema Zoom when
you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 ENTERTAINMENT
ENTERTAINMENT
To set up the network seetings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),
Connecting to a wired network
(Depending on model)
1
2
Press MENU to access the main menus.
Press the Navigation buttons to scroll to NET-
WORK and press OK.
Connect the display to a local area network (LAN)
via the LAN port as shown in the following illustra-
tion and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
3
4
Press the Navigation buttons to select Net-
work Setting and press OK.
If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5
Select IP Auto Setting or IP Manual Setting.
For detail information, contact your internet pro-
vider or router manual.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP address-
es will need to be input manually.
- IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.
LAN
LAN
WAN
Router
6
When you are finished, press EXIT.
ETHERNET
@
Cable modem
Internet
CAUTION
CAUTION
yyNetwork setting menu will not be avail-
able until the display connected to physical
network.
yyDo not connect a modular phone cable to the
LAN port.
yySince there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
yySince there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 23
yyA DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits sub-scription to one device, this display
may not be allowed to connect when a PC is
already connected.)
NOTE
yyIf you want to access the Internet directly on
your display, the internet connection should
always be on.
yyIf you cannot access the Internet, check
the network conditions from a PC on your
network.
yyWhen you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yyIf you do not complete the network settings,
the network may not work properly.
yyThe use of a “Router” may not be allowed or its
usage may be limited depending on the poli-
cies and restrictions of your ISP. For details,
contact your ISP directly.
Tips for Network setting
yyUse a standard LAN cable with this display.
Cat5 or better with a RJ45 connector.
yyMany network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or discon-
nect the power cable of the home network
router or cable modem. Then power on and/or
connect the power cable again.
Network Status
yyDepending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applica-
ble terms of service. For details, contact your
ISP.
1
2
Press MENU to access the main menus.
Press the Navigation buttons to scroll to NET-
WORK and press OK.
yyLG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions as-
sociated with your internet connection, or other
connected equipment.
3
Press the Navigation buttons to select Net-
work Status.
4
5
Press OK to check the network status.
When you are finished, press EXIT.
yyLG is not responsible for problems within your
internet connection.
yyYou may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yySome internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your Internet connection.
Option
Setting
Description
Return to the network setting menu.
Test the current network status after set-
ting the network.
Test
Close
Return to the previous menu.
yyAny fees charged by an ISP including, without
limitation, connection charges are your respon
sibility.
yyA 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 ENTERTAINMENT
Tips for using USB storage devices
Connecting USB storage devices
yyOnly a USB storage device is recognizable.
yyIf the USB storage device is connected
through a USB hub, the device is not recog-
nizable.
Connect USB storage devices such as a USB
flash memory, external hard drive to the display
and use multimedia features (See "Browsing files"
yyA USB storage device using an automatic
recognition program may not be recognized.
yyA USB storage device which uses its own
driver will not be recognized.
Connect a USB flash memory or USB memory
card reader to the Display as shown on the follow-
ing illustration. The My media screen appears.
yyThe recognition speed of a USB storage
device may depend on each device.
yyPlease do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such a
device is suddenly separated or unplugged,
the stored files or the USB storage device
may be damaged.
or
yyPlease do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction. Only use a USB storage device
which has normal music files, image files or
movie files.
yyPlease use only a USB storage device which
was formatted as a FAT32 file system, NTFS
file system by with the Windows operating
system. In case of a storage device format-
ted with a different utility programme which
is not supported by Windows, it may not be
recognized.
CAUTION
yyPlease connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yyDo not turn the display off or remove a USB
storage device while EMF(my media) Menu
is activated, as this could result in loss of
files or damage to the USB storage device.
yyBack up your files saved on a USB storage
device frequently, as you may lose or dam-
age the files and this may be not covered by
the warranty.
yyPlease connect a USB storage device with
the cable included by the device maker.
yySome USB storage devices may not be sup-
ported or operate smoothly.
yyFile alignment method of USB storage devic-
es is similar to Window XP and the Monitor
can recognize up to 100 English characters.
yyBe sure to back up important files since data
stored on a USB memory device may be
damaged. We will not be responsible for any
data loss.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 25
yyIf the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
Browsing files
Access the photo, music, or movie lists and browse
files.
- Please use a power adaptor for an external
power source.
Connect a USB storage device.
1
2
3
Press MENU to access the main menus.
yyIf your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
Press the Navigation buttons to scroll to My
Media and press OK.
Press the Navigation buttons to choose
from Movie List, Photo List, Music List or
Contents List and press OK.
4
yyIf a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yyIf the USB memory device does not work
properly, disconnect and reconnect it.
yyHow fast a USB memory device is detected
differs from device to device.
Movie List
Photo List
Music List
Contents List
yyIf the USB is connected in Standby Mode,
that drive will automatically be loaded when
the display is turned on.
1
2
Page 1/1
Photo List
Page 1/1
Drive1
USB External
4
5
yyThe recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
001
010
002
003
012
004
013
005
006
015
007
008
009
011
014
yyAny device with more than the recommend-
ed capacity may not work properly.
yyIf a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
Move
View
P
Page Change
Change Numbers
Mark Mode
Exit
To Music List
3
yyUSB storage devices below USB 2.0 are
supported as well. But they may not work
properly with videos.
No.
Description
yyA maximum of 999 folders or files can be
recognized under one folder.
Moves to upper level folder
Current page/Total pages
1
2
3
yyIt is recommended you use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
Corresponding buttons on the
remote control
Current page/ total pages of contents
under the folder focused on
4
1
yyOnly a USB memory stick can be used to
play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
5
1
Contents under the folder focused on
Buttom
Description
Press the green button to toggle between
Green Photo List -> Music List, Music List ->
button Contents List, Contents List -> Movie
List or Movie List -> Photo List.
yyOnly an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
Yellow A method to view in 5 large thumbnail or
button simple list.
yyA USB 3.0 storage device may not work.
Blue
Convert to Mark Mode.
button
Download from Www.Somanuals.com. All Manuals Search And Download.
26 ENTERTAINMENT
Supported file format
Type
Movie
Supported file format
Content
(when
using
SuperSign
Manager)
File Extensions : *.cts/ *.cse
Movie
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Video format : DivX3.11, DivX4, DivX5, DivX6,
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2,
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
File
Item
Profile
Extensions
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Photo JPEG
supported
file format
SOF0:
baseline
SOF1:
Extend
Sequential
SOF2:
y
y
JPG
PNG
BMP
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
y
Progressive
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
Photo size
Bit rate
Min: 64 x 64
Max Type:
1366 x 768
y
y
Photo
JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
Music MP3
32 kbps to 320
kbps
y
y
You can play JPEG files only.
Non-supported files are displayed in the form
of predefined icon.
Sampling
rate
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
File
Item
Profile
Extensions
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
jpeg
jpg
jpe
supported
file format
SOF0:
baseline
SOF1:
Extend
Sequential
SOF2:
y
y
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
y
Progressive
photo size
Min: 64 x 64
Max-Normal
Type:
y
y
15360 (W) x
8640 (H)
Progressive
Type:
1920 (W) x
1440 (H)
y
y
y
Music
MP3
Bit rate 32 to 320
y
y
y
Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 27
5
Play a movie.
Viewing movies
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
NOTE
yyNon-supported files are displayed the preview
image by icon only
yyAbnormal files are displayed in the form of
bitmap
.
1
2
3
4
Press the Navigation buttons to scroll to My
.
Media and press OK.
Press the Navigation buttons to scroll to Movie
List and press OK.
6
Control playback by using the following buttons.
Press the Navigation buttons to scroll to a
folder you want and press OK.
Press the Navigation buttons to scroll to a file
you want and press OK.
01:02:30 / 02:30:25
MENU
Page 1/1
Movie List
Hide
Exit
Option
Page 1/1
Drive1
USB1 USB Drive
001
005
002
006
003
004
Button
Description
Stops the playback
Plays a video
Move
Play
P
Page Change
Change Numbers
Mark Mode
Exit
To Photo list
Pauses or resumes the playback
Scans backward in a file
Page 1/1
Movie List
Mark Mode
Page 1/1
Drive1
Scans forward in a file
USB1 USB Drive
001
005
002
006
003
004
Show the Option menu.
051. Apple_ ......
02:30:25
Hide the menu on the full-sized screen.
HIDE
Return to Movie List.
EXIT
Skips to specific points in a file dur-
ing playback. The time of a specific
point will appear on the status bar. In
some files, this function may not work
properly.
Move
Mark
P
Page Change
or
Mark All
Unmark All
Exit Mark Mode
Exit
Play Marked
Press the
ENERGY SAVING but-
ton repeatedly to increase the bright-
ness of your screen.
ENERGY
SAVING
Menu
Description
Play Marked
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Deselect all marked movie files.
Exit the Mark Mode.
Unmark All
Exit Mark
Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
28 ENTERTAINMENT
Tips for using playing video files
When you are watching the movie by Movie
yy
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
yySome user-created subtitles may not work
properly.
yySome special characters are not supported
in subtitles.
yyHTML tags are not supported in subtitles.
yySubtitles in languages other than the sup-
ported languages are not available.
yyThe screen may suffer temporary interrup-
tions (image stoppage, faster playback, etc.)
when the audio language is changed.
yyA damaged movie file may not be played
correctly, or some player functions may not
be usable.
Video options
1
Press MENU to access the Pop-Up menus.
2
Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
yyMovie files produced with some encoders
may not be played correctly.
yyIf the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
NOTE
yyHD videos with a maximum of
yyOption values changed in Movie List does
not affect Photo List and Music List.
yyOption value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
yyWhen replaying the video file after stopping,
you can play from where it stopped previ-
ously.
1920x1080@25/30P or 1280x720@50/60P
are supported, depending on the frame.
yyVideos with resolutions higher than
1920X1080@25/30P or 1280x720@50/60P
may not work properly depending on the
frame.
yyMovie files other than the specified types and
formats may not work properly.
yyMax bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yyWe do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yyDTS Audio codec is not supported.
yyA movie file more than 30 GB in file size is
not supported for playback.
yyA DivX movie file and its subtitle file must be
located in the same folder.
yyA video file name and its subtitle file name
must be identical for it to be displayed.
yyPlaying a video via a USB connection that
doesn’t support high speed may not work
properly.
yyFiles encoded with GMC(Global Motion
Compensation) may not be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 29
Support Language
When you select the Set Video Play,,
Code Page
Latin1
English, Spanish, French,
1
Press the Navigation buttons to scroll to show
the Picture Size, Audio Language, Subtitle
Language or Repeat.
German, Italian, Swedish, Finnish,
Dutch, Portuguese, Danish, Roma-
nian, Norwegian, Albanian, Gaelic,
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Slovak, Slovenian, Serbian,
Hungarian
2
Press the Navigation buttons to scroll to make
appropriate adjustments.
Latin2
Latin4
Estonian, Latvian, Lithuanian
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Cyrillic
Greek
Greek
Turkish
Korean
Turkish
Menu
Picture Size
Description
Selects your desired picture
format during movie play.
Changes the Language Group of the
audio during movie play. Files
with a single audio track cannot be
selected.
Korean
Audio
Language
Subtitle
Turn on/off the subtitle.
Language
Language
Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page
Sync
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
NOTE
yyOnly 10,000 of sync blocks can be supported
within the subtitle file.
yyWhen playing a video, you can adjust the
Picture Size by pressing the ARC button.
yySubtitles in your language are only sup-
ported when the OSD menu is also in this
language.
Position
Changes the position of the
subtitle either up or down during
movie play.
Size
Selects your desired Subtitle size
during movie play.
yyThe code page options may be disabled de-
pending on the language of the subtitle files.
yySelect the appropriate code page for the
subtitle files.
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 ENTERTAINMENT
Page 1/1
When you select the Set Video,,
Photo List
Page 1/1
009
USB1 USB Drive
Drive1
1
Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
003
012
004
013
005
006
015
007
008
011
014
Move
View
P
Page Change
When you select the Set Audio,,
Change Numbers
Mark Mode
Exit
To Music List
1
2
Press the Navigation buttons to scroll to show
Page 1/1
Photo List
the Sound Mode, Clear Voice II or Balance.
Mark Mode
Page 1/1
009
USB1 USB Drive
Drive1
Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
003
004
013
005
014
006
015
007
008
011
012
Move
Mark
P
Page Change
Mark All
Unmark All
Exit Mark Mode
Exit
View Marked
Viewing photos
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
Menu
Description
View Marked
Mark All
Display the selected photo file.
Mark all photo files on the screen.
Deselect all marked photo files.
Exit the Mark Mode.
1
2
3
4
Press the Navigation buttons to scroll to My
Unmark All
Exit Mark
Mode
Media and press OK.
Press the Navigation buttons to scroll to Photo
5
View photos.
List and press OK.
Press the Navigation buttons to scroll to a
folder you want and press OK.
Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
yyNon-supported files are displayed the preview
image by icon only
yyAbnormal files are displayed in the form of
bitmap
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 31
Using photo options
ENERGY
SAVING(
Press the ENERGY SAVING button
repeatedly to change the brightness of
your screen.
)
Use the following options while viewing photos.
Option
y Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
y TransitionEffect: Set the view mode
of the slideshow.
y BGM: Selects a music folder for the
background music.
NOTE
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Hide
MENU
Option
Exit
Slideshow
BGM
Options
Number of selected photos
Hide
EXIT
Hides the option window.
To display the options, press OK.
Return to Photo List.
Option
Description
Slideshow
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all pho-
tos saved in the current folder display
during a slideshow.
To set a slideshow speed, select Op-
tion.
Photo options
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
1
Press MENU to show the Option menus.
You can adjust Option by MENU button
on the remote control.
2
Press the Navigation buttons to scroll to Set
Photo View., Set Video. or Set Audio. and
press OK.
Rotates photos clockwise (90°, 180°,
270°, 360°).
(Rotate)
NOTE
NOTE
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
yyOption values changed in Movie List does
not affect Photo List and Music List.
yyOption value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
View the photo by zoom in 2, 4 times.
(Zoom)
NOTE
yyPhotos with a resolution of
960x540 or less cannot be
enlarged.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 ENTERTAINMENT
When you select the Set Photo View,
1
2
Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.
Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide
Shutter
Fade In
Fades the slide out slowly before playing to the next slide.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 33
When you select the Set Video,
Listening to music
1
Press the Navigation buttons to scroll to make
appropriate adjustments.
1
2
3
4
Press the Navigation buttons to scroll to My Me-
dia and press OK.
Press the Navigation buttons to scroll to Music
When you select the Set Audio,
List and press OK.
1
2
Press the Navigation buttons to scroll to show
Press the Navigation buttons to scroll to a folder
the Sound Mode, Clear Voice II or Balance.
you want and press OK.
Press the Navigation buttons to scroll to make
appropriate adjustments.
Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
Page 1/1
USB1 USB Drive
Drive1
001.
-
B01.mp3
002. -B02.mp3
00:00
003. B03.mp3
00:00
004.
-
B04.mp3
00:00
00:00
005.
-
B05.mp3
00:00
Move
Play
Mark Mode
P
Page Change
Exit
Change Numbers
To Movie List
Page 1/1
Music List
Mark Mode
Page 1/1
USB1 USB Drive
Drive1
001.
-
B01.mp3
B05.mp3
002. -B02.mp3
00:00
003. B03.mp3
00:00
004.
-
B04.mp3
00:00
00:00
005.
-
00:00
Move
Unmark All
Mark
P
Page Change
Mark All
Play Marked
Exit
Exit Mark Mode
Menu
Description
Play Marked Display the selected music file.
Mark All
Unmark All
Exit Mark
Mode
Mark all music files on the screen.
Deselect all marked music files.
Exit the Mark Mode.
5
Play music.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 ENTERTAINMENT
Tips for playing music files
This unit cannot support the ID3 Tag
6
Control playback by using the following buttons.
yy
Page 1/1
embedded MP3 files.
Music List
3
file(s) Marked
Drive1
Page 1/1
NOTE
004.
-
B04.mp3
005.
-
B05.mp3
006.
-
B06.mp3
007.
-
B07.mp3
008.
-
B08.mp3
00:00
00:00
00:00
00:00
00:00
005. - B05.mp3
02:30 / 03:25
Hide
yyNon-supported files are displayed the pre-
MENU
Play with Photo
Option
Exit
view image by icon only
yyAbnormal files are displayed in the form of
bitmap
.
.
Button
Description
yyA damaged or corrupted music does not play
but displays 00:00 in playtime.
Stops playing back the file and moves
back to the music list.
Plays a music file
yyA music downloaded from a paid service with
copyright protection does not start but dis-
plays inappropriate information in playtime.
Pauses or resumes playback
Skips to the next file
yyIf you press OK,
buttons, screen saver is
Skips to the previous file
When playing,
stopped.
or
When you press the
button, the
yyThe PLAY( ), Pause( ),
,
,
previous music file will be played.
buttons on the remote control are also avail-
able in this mode.
When you press the
button, the next
music file will be played.
yyYou can use the
music and the
ous music.
button to select the next
button to select the previ-
Green
button
Start playing the selected music files
and then move to the Photo List.
Press the
ENERGY SAVING button
repeatedly to change the brightness of
your screen.
ENERGY
SAVING
Option
file name
Show the Option menu.
002. B02.mp3
Hides the option window.
Hide
00:31 / 04:04
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
EXIT
Time elapsed/ Duration
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
or
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 35
Music options
Viewing the Contents List
1
Press MENU to access the Pop-Up menus.
Plays back the stored files using the Export option
in SuperSign Manager.
2
Press the Navigation buttons to scroll to Set Au-
dio Play. or Set Audio. and press OK.
1
2
3
4
Press the Navigation buttons to scroll to My
Media and press OK.
Press the Navigation buttons to scroll to Con-
NOTE
tents List and press OK.
yyOption values changed in Movie List does
not affect Photo List and Music List.
yyOption value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
Press the Navigation buttons to scroll to a
folder you want and press OK.
Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Contents List
When you select the Set Audio Play.,
Page 1/1
USB1 USB Drive
Drive1
test1.cts
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
07/01/2011
1
Press the Navigation buttons to scroll to select
test5.cts
07/01/2011
the Repeat or Random.
Move
Change Numbers
Play
P
Page Change
2
Press the Navigation buttons to scroll to make
appropriate adjustments.
To Movie List
Exit
NOTE
When you select the Set Audio,,
yyWhile playing media files from Contents List,
only the BACK, EXIT or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
yyIf there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
1
2
Press the Navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
Press the Navigation buttons to scroll to make
appropriate adjustments.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 ENTERTAINMENT
DivX® VOD Deregistration
DivX® VOD Guide
You should deregister your device with 8 digit DivX
com/vod.
DivX® VOD Registration
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
1
2
Press MENU to access the main menus.
Press the Navigation buttons to scroll to MY
MEDIA and press OK.
3
4
Press the Blue button.
1
2
Press MENU to access the main menus.
Press the Navigation buttons to scroll to Deacti-
vation and press OK.
Press the Navigation buttons to scroll to MY
MEDIA and press OK.
5
Press the Navigation buttons to select Yes to
confirm.
3
4
Press the Blue button.
Press the Navigation buttons to scroll to DivX
Reg. Code and press OK.
Deregistration code :
********
5
6
View the registration code of your display.
Continue with registration?
When you are finished, press EXIT.
Yes
No
When you return to the previous menu, press
BACK.
6
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device to
play DivX protected videos.
Registration code : **********
Close
NOTE
Once the deregistration is executed, you
yy
must register your device again to see DivX®
VOD contents.
NOTE
yyWhile you are checking the registration code,
some buttons may not work.
yyIf you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
monitor.
yyThe video or audio files that are not con-
verted by the standard DivX codec may be
corrupted or not be played.
yyThe DivX VOD code allows you to activate
up to 6 devices under one account.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 37
5
Select the PIP or PBP icon from the play list.
Using PIP/PBP
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
sub screens. (See p.47)
1
2
Press the MENU button to move to OPTION
and press OK.
Press PIP/PBP to select PIP or PBP and then
01:02:30 / 02:30:25
MENU
Hide
Exit
Option
press OK.
< Movie List >
PIP/PBP
Prev.
Move
Mode
Position
Size
Off
PIP
PBP
3
Select Movie List or Photo List from My
Media. (With PIP/PBP selected, the Music
List and Contents List are deactivated.)
2/13
Hide
MENU
Option
Exit
Slideshow
BGM
< Photo List >
Movie List
Photo List
Music List
Contents List
6
Select either Main or Sub for sound. You must
to select the output sound before running the
PIP or PBP function.
4
Select a file you want and then press OK.
Page 1/1
Select the sound path.
Movie List
Page 1/1
Drive1
USB1 USB Drive
Main
Sub
001
005
002
006
003
004
7
The sub screen is displayed on the main
screen.
Move
Play
P
Page Change
Change Numbers
Mark Mode
Exit
To Photo list
Download from Www.Somanuals.com. All Manuals Search And Download.
38 CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
Accessing main menus
ARC
UTE
Press MENU to access the main menus.
1
2
AUTO
OK
MENU
S.MENU
Press the Navigation buttons to scroll to one of the following menus and
press OK.
BACK
ID
TILE
EXIT
ON
OFF
Press the Navigation buttons to scroll to the setting or option you want
and press OK.
3
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.39)
Adjusts the image size,
quality, or effect.
AUDIO (See p.42)
Adjusts the sound quality,
effect, or volume level.
TIME (See p.43)
Sets the time, date, or
Timer feature.
PICTURE
AUDIO
TIME
MY MIDIA (See p.24)
Display and play movie,
photo and music content
stored on your USB
OPTION (See p.44)
Customizes the general
settings.
OPTION
NETWORK
MY MEDIA
NETWORK (See p.49)
Sets up the network
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 39
PICTURE settings
Move
OK
PICTURE
• Aspect Ratio
: 16:9
: Off
ꔋ
Press MENU to access the main menus.
1
2
•
Energy Saving
• Smart Energy Saving : Off
• Picture Mode : Standard
Press the Navigation buttons to scroll to PICTURE and
press OK.
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
70
100
50
50
60
0
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
- To return to the previous level, press BACK.
R
G
C
• Tint
W
• Color Temp.
0
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
• Advanced Control
• Picture Reset
• Screen
The available picture settings are described in the following:
Setting
Description
Changes the image size to view images at its optimal size (See p.19).
Aspect Ratio
Energy
Saving
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Level
Off
Disables Energy Saving function.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen Off
The screen turns off in 3 seconds.
Smart Energy Adjusts the backlight and contrast depending on the screen brightness.
Saving
Level
Off
On
Disables the Smart Energy Saving function.
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Picture Mode
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Cinema
Adjusts the image for the normal environment.
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 CUSTOMIZING SETTINGS
Setting
Description
SCREEN
(In RGB
Mode Only)
Customizes the PC display options in RGB mode.
Option
Resolution
Auto Configure
Selects a proper resolution. See “Customizing PC display options”.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Picture Mode options
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Sharpness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp .
Advanced Control
Picture Reset
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Customizes the advanced options. Refer to the Advanced image options. (See p.41).
Restores the options to the default setting.
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
yy
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB/ HDMI-PC/ DVI-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 41
Advanced Control
Setting
Description
Dynamic
Contrast
(Off/High/
Medium/Low)
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (Function works in the
following mode - Component, HDMI-DTV, DVI-DTV)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (Function works in
the following mode - Component, HDMI-DTV, DVI-DTV)
Clear White
Make the white area of screen brighter and more white.
(Off/High/Low)
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise
Reduces screen noise without compromising video quality. (Function works in the following mode -
Component, HDMI-DTV, DVI-DTV)
Reduction
(Off/High/
Medium/Low)
Digital Noise
Reduction
This option reduces the noise produced while creating digital video signals.
(Off/High/
Medium/Low)
Gamma
Set your own gamma value. On the monitor, high gamma values display whitish images and low
(High/Medium/ gamma values display high contrast images.
Low)
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - Component, HDMI-DTV, DVI-DTV)
Download from Www.Somanuals.com. All Manuals Search And Download.
42 CUSTOMIZING SETTINGS
AUDIO settings
Move
OK
AUDIO
• Clear Voice II
• Balance
: Off
ꔋ
Press MENU to access the main menus.
1
2
L
R
0
• Sound Mode
: Standard
Press the Navigation buttons to scroll to AUDIO and press
OK.
• Infinite Sound: Off
• Treble
• Bass
• Reset
50
50
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
• Digital Audio Input
• Speaker
: On
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
Balance
By differentiating the human sound range from others, it helps users listen to human voices better.
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
Music
The most commanding and natural audio.
Select this option to enjoy the original sound when listening to
the music.
Cinema
Sport
Select this option to enjoy sublime sound.
Select this option to watch sports broadcasting.
To enjoy dynamic sound when playing a game.
Game
NOTE
If sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
Option
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound
from two speakers.
Treble
Controls the dominant sounds in the output. When you turn up
the treble, it will increase the output to the higher frequency
range.
Bass
Makes the output sound softer. When you turn up the bass, it will
increase the output to the lower Frequency.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI/Display Port: Outputs the sound of digital signal from HDMI through the monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI to the Audio In
port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 43
TIME settings
Move
OK
TIME
• Clock
ꔋ
Press MENU to access the main menus.
1
2
• Off Time
: Off
: Off
: Off
: Off
• On Time
Press the Navigation buttons to scroll to TIME and press
OK.
• Sleep Timer
• Power On Delay
• Auto Off
: On
Press the Navigation buttons to scroll to the setting or option
3
4
• Automatic Standby : On
you want and press OK.
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sleep Timer
Sets the time to turn on or off the Monitor set.
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
Auto off
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
Off Time/ On Time can be saved for up to seven schedules; the Monitor is turned on or off at the preset
yy
time in the schedule list. If multiple preset times are stored in the schedule list, this function works at the
nearest time from the current time.
Once the on or off time is set, these functions operate daily at the preset time.
yy
The scheduled power-off function works properly only when the device time is set correctly.
yy
When the scheduled power-on and power-off times are the same, the power-off time has priority over the
yy
power-on time if the set is turned on, and vice versa if the set is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 CUSTOMIZING SETTINGS
OPTION settings
Move
OK
OPTION
• Language
ꔋ
Press MENU to access the main menus.
1
2
• Power Indicator
• ISM Method
• DPM Select
• Fail Over
: Normal
: On
Press the Navigation buttons to scroll to OPTION and press
OK.
: Off
• Factory Reset
• Set ID
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3
4
: 1
• Tile Mode
• PIP/PBP
- To return to the previous level, press BACK.
• Key Lock
: Off
• Product/Service Info.
• Portrait Mode
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language
Description
To choose the language in which the control names are displayed.
Use this function to set the power indicator on the front side of the product to On or Off.
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
Power Indicator
ISM Method
could result in a image burn remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Orbiter
Leave on normal if you don't foresee image burn in being a problem.
May help prevent image burn. However, it is best not to allow any fixed image
to remain on the screen. To avoid a permanent image on the screen, the
screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
Fail Over
A user can choose to turn the power saving mode on / off.
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
Factory Reset
Set ID
Select this option to return to the default factory settings.
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 45
Setting
Tile Mode
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to DVI Cable and distributor.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position
Size
Moving the screen position horizontally and vertically.
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
Reset
The image is omitted by the distance between the screens to be naturally
shown.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
PIP/PBP
Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
and sub screens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Size
Adjusts the position of the sub screen (top left, bottom left, top right, bottom
right)
The default value is the bottom right.
Adjusts the size of the sub screen (Size 0 to 10).
The default size of PIP (Size: 0) is 480x270; the maximum size 10 is 960x540.
NOTE
The Position and Size options are enabled only in PIP mode.
yy
Key Lock
Turns the local key function on or off. If Key Lock is enabled, the local key does not work.
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
Portrait mode
Rotate OSD clockwise (90°,270°)
Option
90°
Rotate OSD clockwise 90°.
Rotate OSD clockwise 270°.
270°
90°
270°
Download from Www.Somanuals.com. All Manuals Search And Download.
46 CUSTOMIZING SETTINGS
Tile Mode
This monitor can be tiled with additional monitors to create a large tiled display.
3X3
1X2
2X2
Off
When using 9 monitors
When using 2 monitors
When using 4 monitors
When the Tile Mode
option is disabled
ID 3
ID 6
ID 2
ID 1
ID 2
ID 5
ID 2
ID 1
ID 1
ID 4
ID 4
ID 3
Tile ID
ID 9
ID 8
ID 7
4X4
5X5
When using 25 monitors
When using 16 monitors
ID 3
ID 4
ID 5
ID 2
ID 1
ID 1
ID 5
ID 3
ID 7
ID 4
ID 8
ID 2
ID 6
ID 8
ID 9
ID 10
ID 15
ID 7
ID 6
ID 13
ID 18
ID 23
ID 14
ID 19
ID 24
ID 12
ID 11
ID 16
ID 21
ID 11
ID 15
ID 12
ID 16
ID 10
ID 14
ID 9
ID 20
ID 25
ID 17
ID 22
ID 13
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 47
PIP/PBP
Displays videos or photos stored in the USB device on a single
monitor by dividing it into the main and sub screens. (See p.37)
Mode
NOTE
*PIP(Picture In Picture): Displays the Sub screen
in the main screen.
*PBP(Picture By Picture): Displays the Sub
screen next to the main screen.
The subscreen is only supported when using the
yy
USB device.
Sub
USB
O
Sub
screen
Component
Main
screen
Main
RGB
O
HDMI/DVI
O
PIP
PBP
You can only change the size and position in PIP
yy
mode.
With PBP selected, theAspect Ratio option in the
yy
PICTURE menu is disabled (Fixed as 16:9).
While running the PBP function, the Tile Mode function
Position
yy
does not work.
You must select the output sound before running
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
yy
the PIP or PBP functions. (Select either Main or
Sub.)
If you fail to select Main or Sub from the sound
yy
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
top left
top right
You cannot change the sound while running the
yy
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
The picture quality of the subscreen is set
yy
according to the values selected in the main menu,
not the USB device.
When the power is turned off/on, the PIP/PBP
yy
bottom left
Size
bottom right
mode is disabled.
If you play videos you selected in PIP/PBP mode,
yy
the videos will play back repeately in succession.
The buttons below work in PIP mode.
yy
Button
Photo
Movie
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0 :
480x270
< 1920x1080 >
Download from Www.Somanuals.com. All Manuals Search And Download.
48 CUSTOMIZING SETTINGS
Picture ID
Picture ID is used to change the settings of a
specific display using a single IR receiver for multi-
vision. Communication is possible between a set
with an IR receiver and other sets using audio
cables. Each set is identified by a set ID. If you
assign the Picture ID using the remote control, only
displays with the same Picture ID and Set ID can
be controlled remotely.
2
If you press the left/right buttons or press the
ON button repeatedly, the Picture ID cycles
through OFF and 0 to 4. Assign the ID you
want.
Picture ID
◄
Off
►
Close
IR Receiver
Audio cable
If you assign the Set ID to each set with
yy
multi-vision, and then assign the Picture ID
using the red button on the remote control,
the key command is displayed for the set
with the same Set ID and Picture ID. A set
with different Set IDs and Picture IDs cannot
be controlled by IR signals.
Picture ID
Off
Close
For more information on how to assign the
yy
Set ID, see "Set ID" on page 44.
Please refer to the Installation Manual for
2X2 Multi-Vision (Total Set ID: 4)
Set IDs are assigned as shown in the picture.
yy
more information on Total Set ID assignment.
1
Press the red ON button on the remote control
to assign the Picture ID.
NOTE
For example, if the Picture ID is assigned to
yy
BACK
EXIT
2, the upper right display (Set ID: 2) can be
controlled by IR signals.
TILE
OFF
ID
ON
For each set, you can change the settings
yy
for the PICTURE, AUDIO, TIME, NETWORK
and MY MEDIA menus or the hot keys on
the remote control.
If you press the green OFF button for Picture
yy
IDs, the Picture IDs for all sets are turned off.
If you then press any button on the remote
control, all sets will start working again.
Picture ID will be disabled while using the
yy
MY MEDIA menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 49
NETWORK settings
Move
OK
NETWORK
• Player Name
ꔋ
Press MENU to access the main menus.
1
2
• Network Setting
• Network Status
• Server IP Setting
• Server IP Status
: Wired
: Not connected
Press the Navigation buttons to scroll to NETWORK and
press OK.
: Not connected
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3
4
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Configure the network settings.
Network Setting
Network Status
Display the network status.
- Internet is connected : Extermally connected
- Home network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
Download from Www.Somanuals.com. All Manuals Search And Download.
50 MAKING CONNECTIONS
MAKING CONNECTIONS
Connect various external devices to the ports on the Monitor set’s back panel.
Find an external device you want to connect to your Monitor set shown on the following illustration.
Check the connection type of the external device.
1
2
3
Go to the appropriate illustration and check the connection details.
HD Receiver
DVD
VCR
HDMI - See p.51
DVI - See p.51
Component - See p.52
HDMI - See p.51
DVI - See p.51
Component - See p.52
Component - See p.52
Speaker
USB
Memory storage
– See p.24
PC
Gaming device
Camcorder/Camera
RGB - See p.14
HDMI - See p.15
DVI - See p.15
LAN - See p.52
HDMI - See p.51
DVI - See p.51
Component - See p.52
HDMI - See p.51
Component - See p.52
NOTE
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
yy
It is recommended you to use the optional speaker provided.
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 51
HDMI connection
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
Back of the product.
DVI connection
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the DVI cable as
shown in the following illustration. To transmit an
audio signal, connect an optional audio cable.
Back of the product.
(not included)
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
(not included)
Download from Www.Somanuals.com. All Manuals Search And Download.
52 MAKING CONNECTIONS
Component connection
Connecting to the LAN
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Using a router(Switch)
A
LAN
Switch
Back of the product.
Monitor Set
PC
Using the Internet.
LAN
B
Network
PC
Monitor Set
Connecting to a USB
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor set and
access the USB menu to use various multimedia
files.
NOTE
When connecting to the Component port
yy
using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
or
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 53
Daisy Chain Monitors
Use this function to digital video signal from a PC on multiple monitors.
Connect a signal input cable (DVI cable) to the DVI IN port of the first monitor.
Connect one end of the signal input cable to the PC.
1
2
3
Connect one end of a signal input cable to the DVI OUT port of the first monitor and the other end to the
DVI IN of the second monitor.
DVI Cable
Monitor 1
Monitor 2
Monitor 3
Monitor 4
DVI Cable
(not included)
NOTE
The number of monitors that can be connected to one output may vary depending on signal status
yy
and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to
9 monitors. If you want to connect more than this number of monitors, it is recommended to use a
distributor.
When multi-connecting in/out cascade format, no loss cables are recommended.
yy
DVI OUT does not work when connecting to a third-party product.
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
54 TROUBLESHOOTING
TROUBLESHOOTING
No image is displayed
Problem
Resolution
Is the product power cord
connected?
See if the power cord is properly connected to the outlet.
y
y
Does the 'Out of range'
message appear?
The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
Does the 'Check signal cable'
message appear?
The signal cable between PC and product is not connected. Check
the signal cable.
Press the 'INPUT' menu in the remote Control to check the input
signal.
y
y
'Unknown Product' message appears when the product is connected.
Problem
Resolution
Did you install the driver?
See if the plug&play function is supported by referring to the video
card user manual.
y
'Key Lock On' message appears.
Problem
Resolution
The 'Key Lock On' message
appears when pressing the
Menu button.
The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 55
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
y
See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
y
y
Do thin lines appear on the
background screen?
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the
characters look blurred.
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
y
y
The screen is displayed
abnormally.
The proper input signal is not connected to the signal port. Connect
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
Resolution
After-image appears when the
product is turned off.
If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
y
When a dark image is displayed on the screen after an image with
high contrast (black and white or gray), this may cause image sticking.
The image sticking will disappear after 2 or 3 minutes.
This is normal for LCD screen.
y
* Please avoid displaying images on the screen as shown below. It is
recommended to display images with relatively high brightness.
TIME
17:00
TIME
17:00
Download from Www.Somanuals.com. All Manuals Search And Download.
56 TROUBLESHOOTING
The audio function does not work.
Problem
Resolution
No sound?
See if the audio cable is connected properly.
Adjust the volume.
See if the sound is set properly.
y
y
y
Sound is too dull.
Sound is too low.
Select the appropriate equalize sound.
Adjust the volume.
y
y
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution
(16 colors).
Set the number of colors to more than 24 bits (true color) Select
Control Panel - Display - Settings - Color Table menu in Windows.
y
y
y
Screen color is unstable or
mono-colored.
Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
Resolution
The power suddenly turned off.
Is the sleep timer set?
Check the power control settings. Power interrupted.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 57
SPECIFICATIONS
42WL10MS
LCD Panel
Screen Type
42" class (42.0" / 106.7 cm diagonal)
TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Pixel Pitch
0.4833 mm (H) x 0.4833 mm (V)
Video Signal
Max. Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/ DVI : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 x 1080 @ 60 Hz
HDMI/ DVI : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
RGB : 30 kHz to 83 kHz
HDMI/ DVI : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI/ DVI : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
Input Connector
Power
15-pin D-Sub type, HDMI (digital), Component, RS-232C,
LAN, DVI, USB
Rated Voltage
AC 100-240 V~ 50/60 Hz 1.8 A
Power Consumption
On Mode : 90 W Typ.
Sleep Mode (RGB) : ≤ 0.5 W
Sleep Mode (HDMI, DVI) : ≤ 0.7 W
Off Mode : ≤ 0.5 W
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
58 SPECIFICATIONS
Dimensions
(Width x Height x
Depth) / Weight
H
W
D
962.2 mm x 560.8 mm x 77 mm / 12.8 kg
H
W
D
962.2 mm x 636.5 mm x 297.7 mm / 14.1 kg
H
W
D
962.2 mm x 560.8 mm x 100.1 mm / 13.55 kg
H
W
D
962.2 mm x 636.5 mm x 297.7 mm / 14.85 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Speaker Impedance
8 Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 59
47WL10MS
LCD Panel
Screen Type
47" class (46.9" / 119.2 cm diagonal)
TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Pixel Pitch
0.5415 mm (H) x 0.5415 mm (V)
Video Signal
Max. Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/ DVI : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 x 1080 @ 60 Hz
HDMI/ DVI : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
RGB : 30 kHz to 83 kHz
HDMI/DVI/DP : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI/ DVI : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
Input Connector
Power
15-pin D-Sub type, HDMI (digital), Component, RS-232C,
LAN, DVI, USB
Rated Voltage
AC 100-240 V~ 50/60 Hz 1.8 A
Power Consumption
On Mode : 95 W Typ.
Sleep Mode (RGB) : ≤ 0.5 W
Sleep Mode (HDMI/ DVI) : ≤ 0.7 W
Off Mode : ≤ 0.5 W
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 SPECIFICATIONS
Dimensions
(Width x Height x
Depth) / Weight
H
W
D
1074.3 mm x 624 mm x 78.6 mm / 15.5 kg
H
W
D
1074.3 mm x 699.9 mm x 297.7 mm / 16.8 kg
H
W
D
1074.3 mm x 624 mm x 101.6 mm / 16.25 kg
H
W
D
1074.3 mm x 699.9 mm x 298.3 mm / 17.55 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Speaker Impedance
8 Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 61
Dimensions
The illustrations in this manual may differ from the actual product and accessories.
(Unit : mm)
42WL10MS
962.2
77
14.8
381.1
4-M6 (Wall mounting screw)
Depth 10.0 mm(Max)
200
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
62 SPECIFICATIONS
Dimensions
The illustrations in this manual may differ from the actual product and accessories.
(Unit : mm)
47WL10MS
1074.3
78.6
15.3
78.6
337.1
4-M6 (Wall mounting screw)
Depth 20.0 mm(Max)
400
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 63
DTV Mode
Resolution
RGB (PC) supported mode
HDMI/DVI
(DTV)
Horizontal
Resolution
Vertical
Component
Frequency(kHz) Frequency(Hz)
480i
o
o
o
o
o
o
o
x
x
o
o
o
o
o
31.469
31.468
31.469
37.5
70.8
640 x 350
576i
70.8
720 x 400
480p
576p
720p
1080i
1080p
59.94
75
640 x 480
640 x 480
37.879
46.875
49.725
48.363
60.123
44.772
47.72
60.317
75
800 x 600
800 x 600
74.55
60
832 x 624
1024 x 768
1024 x 768
1280 x 720
1360 x 768
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
75.029
59.855
59.799
60.02
75.02
59.954
60
63.981
79.98
65.290
67.5
NOTE
PC resolutions available as the input label
yy
option in RGB and HDMI/DVI input mode :
640 x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920
x 1080 / 60 Hz and DTV resolutions : 480p,
720p, 1080p.
HDMI/ DVI/ Display Port(PC) supported mode
Horizontal
Frequency(kHz) Frequency(Hz)
Vertical
Resolution
31.469
37.879
48.363
44.772
47.7
59.94
60.317
60
640 x 480
NOTE
800 x 600
1024 x 768
1280 x 720
1366 x 768
1280 x 1024
1680 x 1050
1920 x 1080
Vertical frequency: To enable the user to
yy
59.855
60
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
63.981
65.290
67.5
60.02
59.954
60
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
Download from Www.Somanuals.com. All Manuals Search And Download.
64 IR CODES
IR CODES
All models do not support the HDMI/USB function.
yy
Some key codes are not supported depending on the model.
yy
Code (Hexa)
Function
Energy Saving (
POWER
INPUT
Note
95
)
R/C BUTTON
R/C BUTTON (ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
08
0B
C4
C5
43
Monitor On
Monitor Off
MENU
40
Up ( )
41
Down ( )
Left ( )
07
06
Right ( )
OK( )
44
28
BACK(
EXIT
)
5B
4D
02
PSM
Volume
Volume
MUTE
03
09
E0
E1
10 to 19
72
Bright (Page UP)
Bright (Page Down)
Number Key 0 to 9
Red Key (ID ON)
Green Key (ID OFF)
Yellow Key
71
63
61
Blue Key
7B
76
TILE
ARC (4:3)
77
ARC (16:9)
AF
79
ARC (ZOOM)
ARC (MARK)
Auto Config.
99
B1
B0
BA
8F
8E
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 65
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
yy
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
(not included)
PC
Monitor 1
Monitor 2
Monitor 3
Monitor 4
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
3-Wire Configurations (Not Standard)
PC
Set
PC
Set
3
2
5
6
4
7
8
3
2
5
6
4
8
7
RXD
TXD
GND
DTR
DSR
RTS
CTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
TXD
RXD
GND
DSR
DTR
CTS
RTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
66 CONTROLLING THE MULTIPLE PRODUCT
Command reference list
COMMAND
DATA
(Hexadecimal)
1
k
x
k
j
2
01. Power
a
00 to 01
02. Input Select
b
c
q
x
g
h
k
i
Refer to ‘Input Select.’
Refer to ‘Aspect Ratio.’
Refer to ‘Energy Saving.’
Refer to ‘Picture mode.’
00 to 64
03. Aspect Ratio
04. Energy Saving
05. Picture mode
06. Contrast
d
k
k
k
k
k
x
f
07. Brightness
00 to 64
08. Sharpness
00 to 64
09. Color
00 to 64
10. Tint
j
00 to 64
11. Color Temperature
12. H Position
u
q
r
00 to 64
00 to 64
13. V Position
f
00 to 64
14. H Size
f
s
u
t
00 to 64
15. Auto configuration
16. Balance
j
01
k
d
k
k
d
k
k
f
00 to 64
17. Sound mode
18. Treble
y
r
Refer to ‘Sound mode.’
00 to 64
19. Bass
s
v
e
f
00 to 64
20. Speaker
00 to 01
21. Volume Mute
22. Volume Control
23. Time 1(Years/ Months/ Days)
24. Time 2(Hours/ Minutes/Seconds)
25. Off Timer(Repeat mode/ Time)
26. On Timer(Repeat Mode/ Time)
27. On Timer Input
28. Sleep Time
00 to 01
00 to 64
a
x
e
d
u
f
Refer to ‘Time 1.’
Refer to ‘Time 2.’
Refer to ‘Off Timer.’
Refer to ‘On Timer.’
Refer to ‘On Timer Input.’
00 to 08
f
f
f
f
f
29. Power On Delay
30. Automatic Standby
31. Auto Off
f
h
n
g
i
00 to 64
m
f
00 to 01
00 to 01
32. Language
f
Refer to ‘Language.’
00 to 01
33. Power Indicator(Standby Light)
34. Power Indicator(Power Light)
35. ISM mode
f
o
p
p
i
f
00 to 01
j
Refer to ‘ISM Method.’
00H to 02H
36. Fail Over Select
m
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 67
COMMAND
DATA
(Hexadecimal)
1
m
f
2
j
37. Fail Over Input Select
38. Reset
Refer to ‘Fail Over Input Select.’
K
d
z
i
00 to 03
00 to FF
FF
39. Tile Mode
d
d
d
d
d
d
d
d
f
40. Tile Mode Check
41. Tile ID
Refer to ‘Tile ID.’
00 to 32
00 to 32
00 to 32
00 to 32
00 to 01
00 to 01
00H to 03
FF
42. Tile H Position
43. Tile V Position
44. Tile H Size
e
f
g
h
j
45. Tile V Size
46. Natural Mode (In Tile mode)
47. DPM Select
j
48. FAN Control
d
d
d
k
m
k
d
f
o
w
n
m
c
l
49. FAN Fault Check
50. Temperature Value
51. Remote Lock/ key Lock
52. Key
FF
00 to 01
Refer to ‘Key.’
00 to 01
FF
53. OSD Select
54. Elapsed time return
55. Serial No. Check
56. S/W Version
l
y
z
m
n
o
g
t
FF
f
FF
57. White Balance Red Gain
58. White Balance Green Gain
59. White Balance Blue Gain
60. Backlight
j
00 to FE
00 to FE
00 to FE
00 to 64
00 to 01
00 to 01
j
j
m
d
d
61. PC Power Control
62. PC Power
s
Note : During USB operations such as Dvix or EMF, all commands except Power(k a) and Key(m c)
yy
are not executed and treated as NG.
Download from Www.Somanuals.com. All Manuals Search And Download.
68 CONTROLLING THE MULTIPLE PRODUCT
Transmission / Receiving protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is
in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the
data that is sent from the PC.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and they do send any
acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands are not supported depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 69
01. Power (Command: k a)
04. Energy Saving (Command: j q)
To control the Power On/Off the display.
To set the Energy Saving function.
Transmission
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
[j][q][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Data 00: Off
01: Minimum
02: Medium
03. Maximum
04: Auto
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the monitor set is fully powered on, the
Acknowledgement signal is returned properly.
* There may be a certain time of delay between the
Transmission and Acknowledgement signals.
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
02. Input Select (Command: x b)
To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20: Input (AV)
40: Component
05. Picture Mode (Command: d x)
60: RGB
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(HDMI1)(DTV)
A0: HDMI(HDMI1)(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
91: HDMI2/SDI(DTV)
A1: HDMI2/SDI(PC)
B0: SuperSign
To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data 00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
[b][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported
depending on the model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
06. Contrast (Command: k g)
Transmission
To adjust the screen contrast.
[k][c][ ][Set ID][ ][Data][Cr]
Transmission
Data 01: 4:3
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
02: 16:9
04: Zoom
09: Just scan (720p or more)
(Component, HDMI/ DVI-D/ Display Port DTV)
* RGB, DVI-D, HDMI/Display Port PC mode
(1:1)
[g][ ][Set ID][ ][OK/NG][Data][x]
10 to 1F: Cinema Zoom 1 to 16
(AV, Component, HDMI DTV)
* Available data types differ depending on the input
signal. For more information, see the aspect ratio
section of the owner's manual.
* The aspect ratio may differ depending on the
model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
70 CONTROLLING THE MULTIPLE PRODUCT
07. Brightness (Command: k h)
10. Tint (Command: k j)
To adjust the screen tint.
* This function is available only in AV/Component
input.
To adjust the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Brightness 0 to 100
Acknowledgement
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint R50 to G50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
[j][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
To adjust the screen sharpness.
* This function is available only in AV/Component
input.
11. Color Temperature (Command: x u)
To adjust the screen Color Temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust the screen color.
* This function is available only in AV/Component
input.
12. H Position (Command: f q)
To adjust the screen Horizontal Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Left) to max. 50 (Right)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
[q][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 71
13. V Position (Command: f r)
To adjust the screen Vertical Position.
* This function is available only when the Tile Mode is
set to Off.
16. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
[t][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
00 to 64: min. -50 (Bottom) to max. 50 (Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
14. H Size (Command: f s)
To select the Sound Mode.
To adjust the screen Horizontal Size.
* This function is available only when the Tile Mode is
set to Off.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
* The operational range varies depending on the
RGB input resolution.
Data 01: Standard
02: Music
(Only available for RGB-PC input.)
03: Cinema
04: Sport
Transmission
05. Game
[f][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand)
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
[s][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
15. Auto Configuration (Command: j u)
To adjust the picture position and minimize image
shaking automatically.
To adjust the Treble values.
Transmission
(Only available for RGB-PC input.)
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
[r][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
72 CONTROLLING THE MULTIPLE PRODUCT
19. Bass (Command: k s)
22. Volume Control (Command: k f)
To adjust the Bass values.
To set the playback volume.
Transmission
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Bass 0 to 100
Acknowledgement
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
[f][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
23. Time 1(Year/ Month/ Day) (Command: f a)
To select the speaker on/off.
To set the Time 1(Year/ Month/ Day) values.
Transmission
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 00: Off
01: On
Data 1 00 to 14: 2010 to 2030
Data 2 01 to 0C: January to December
Data 3 01 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1(Year/
Month/ Day) values.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. Volume Mute (Command: k e)
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To control the Volume Mute on/off.
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 00 : Mute (Volume Off)
Data1 00 to 17: 00 to 23 hours
01 : Current volume (Volume On)
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2(Hour/
Minute/ Second) values.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
** This command won’t work if Time 1(Year/ Month/
Day) has not been set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 73
25. Off Timer(Repeat Mode/ Time) (Command: f e)
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the Off Timer(Repeat Mode/ Time) function.
To set the On Timer(Repeat mode/ Time) function.
Transmission
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
Data1
1. f1h to f7h (Read data)
F1: Read the 1st Off Time data
F2: Read the 2nd Off Time data
F3: Read the 3rd Off Time data
F4: Read the 4th Off Time data
F5: Read the 5th Off Time data
F6: Read the 6th Off Time data
F7: Read the 7th Off Time data
2. e1h-e7h (Delete one index), e0h (Delete all
indexes)
1. f1h to f7h (Read data)
F1: Read the 1st On Time data
F2: Read the 2nd On Time data
F3: Read the 3rd On Time data
F4: Read the 4th On Time data
F5: Read the 5th On Time data
F6: Read the 6th On Time data
F7: Read the 7th On Time data
2. e1h-e7h (Delete one index), e0h (Delete all
indexes)
E0: Delete all Off Time data
E1: Delete the 1st Off Time data
E2: Delete the 2nd Off Time data
E3: Delete the 3rd Off Time data
E4: Delete the 4th Off Time data
E5: Delete the 5th Off Time data
E6: Delete the 6th Off Time data
E7: Delete the 7th Off Time data
3. 01h to 06h (Set the day of week for Off Time)
00: Off
E0: Delete all On Time data
E1: Delete the 1st On Time data
E2: Delete the 2nd On Time data
E3: Delete the 3rd On Time data
E4: Delete the 4th On Time data
E5: Delete the 5th On Time data
E6: Delete the 6th On Time data
E7: Delete the 7th On Time data
3. 01h to 06h (Set the day of week for On Time)
00: Off
01: Once
01: Once
02. Daily
02. Daily
03: Monday to Friday
03: Monday to Friday
04: Monday to Saturday
04: Monday to Saturday
05: Saturday to Sunday
05: Saturday to Sunday
06. Sunday
06. Sunday
07. Monday
07. Monday
08. Tuesday
08. Tuesday
09. Wednesday
09. Wednesday
0A. Thursday
0A. Thursday
0B. Friday
0B. Friday
0C. Saturday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fe 01 f1 ff ff - Read the 1st Off Time
data.)
(Example 1: fd 01 f1 ff ff - Read the 1st On Time
data.)
(Example 2: fe 01 e1 ff ff - Delete the 1st Off Time
data.)
(Example 2: fd 01 e1 ff ff - Delete the 1st On Time
data.)
(Example 3: fe 01 04 02 03 - Set the Off Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
(Example 3: fd 01 04 02 03 - Set the On Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
74 CONTROLLING THE MULTIPLE PRODUCT
27. On Timer Input (Command: f u)
To select an external input for the current On Time
setting and add a new schedule or change the
existing schedule.
28. Sleep Time (Command: f f)
To set the Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Transmission
Data 00: Off (Sleep Timer off)
01: 10 min.
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Data (Add schedule)
20: Input (AV)
40: Component
60. RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
Acknowledgement
91: HDMI2/SDI
B0:SuperSign
[f][ ][Set ID][ ][OK/NG][Data][x]
Data1 (Change schedule)
1. f1h to f4h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component
60: RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on. (Unit: Second)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to max. 100 (sec.)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
* To read the schedule input, enter FFH for [Data2].
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.)
* This function is supported only when 1 (Year/Month/
Day), 2 (Hour/Minute/Second), On Time (Repeat
Mode/Time) are set.
** It may not be supported depending on the model.
Acknowledgement
30. Automatic Standby (Command: m n)
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 4 hours)
01: 4 Hours (Off after 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 75
31. Auto Off (Command: f g)
34. Power Indicator (Power Light) (Command: f p)
To set the Auto Off function.
To set the Power Indicator (Power Light) function.
Transmission
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
[f][p][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 15 minutes)
01: 15 min.(Off after 15 minutes)
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
[p][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
35. ISM mode (Command: j p)
To set the language for OSD.
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
[j][p][ ][Set ID][ ][Data][Cr]
Data 00: Czech
01: Danish
Data 01: Inversion
02: Orbiter
02: German
03: English
04: Spanish (EU)
05: Greek
06: French
07: Italian
04: White Wash
08. Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese (Cantonese)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
36. Fail Over Select (Command: m i)
33. Power Indicator (Standby Light) (Command: f o)
To set the Fail Over function.
To set the Power Indicator (Standby Light) function.
Transmission
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
Data 00: Off
01: On
02: Manual
** It may not be supported depending on the model.
Acknowledgement
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
[o][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
76 CONTROLLING THE MULTIPLE PRODUCT
37. Fail Over Input Select (Command: m j)
To select the input source for auto switch.
* This command is only available when the fail over
(auto) mode is set to Custom.
40. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Transmission
Data FF: Check Tile Mode status.
** It may not be supported depending on the model.
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][ ][Data5][Cr]
Acknowledgement
Data 1 to 5 (Priority 1 to 5)
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
60: RGB
70: DVI-D
90: HDMI(HDMI1)
C0: Display Port
Data1 00: Tile Mode Off
01: Tile Mode On
Data2 00 to 0F: Tile Row
Data3 00 to 0F: Tile Column
91: HDMI2/SDI
* The number of data items differs depending on the
model.
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
41. Tile ID (Command: d i)
Data 1 to 5 (Priority 1 to 5)
To set Tile ID.
60: RGB
70: DVI-D
Transmission
90: HDMI(HDMI1)
C0: Display Port
91: HDMI2/SDI
[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile
Row).
* The number of data items differs depending on the
model.
** It may not be supported depending on the model.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
38. Reset (Command: f k)
*NG will be return if data is over (Tile Column) x (Tile
Row), except 0xFF.
To execute the Picture, Screen, Audio and Factory
reset function.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
42. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
[k][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
39. Tile Mode (Command: d d)
To set a Tile Mode and Tile Column/ Row values.
Data 00 to 32: -50 (Left) to 0 (Right)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column
[e][ ][Set ID][ ][OK/NG][Data][x]
*00, 01, 10, 11 means Tile Mode Off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 77
43. Tile V Position (Command: d f)
To adjust the Tile Vertical position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
46. Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
[d][f][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
44. Tile H Size (Command: d g)
To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H
Size.
47. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Transmission
Acknowledgement
[d][g][ ][Set ID][ ][Data][Cr]
[j][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
45. Tile V Size (Command: d h)
To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
48. FAN Control (Command : d o)
To set the Fan mode.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Data 00: Auto
01: On
02: Manual
03: Off
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
** It may not be supported depending on the model.
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
78 CONTROLLING THE MULTIPLE PRODUCT
49. FAN Fault Check (Command: d w)
52. Key (Command: m c)
To check the fan errors.
To send a key code of the IR remote control.
Transmission
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
[c][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Fan fault
01: Fan OK
For a key code, see the IR Code.
* Some key codes are not supported depending on
the model.
02: Model without a Fan
50. Temperature Value (Command: d n)
53. OSD Select (Command: k l)
To check the inside temperature value.
To select OSD(On Screen Display) on/off.
Transmission
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed in hexadecimal.
[l][ ][Set ID][ ][OK/NG][Data][x]
51. Remote Controller Lock/ Key Lock
(Command: k m)
54. Elapsed time return (Command: d l)
To check the panel used time.
When the remote control and front keys are locked in
standby mode, the power cannot be turned on using
the remote control or front power button.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
Data 00: Off (Lock Off)
01: On (Lock On)
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 79
55. Serial No.Check (Command: f y)
58. White Balance Green Gain (Command: j n)
To check the Serial Numbers.
To set the White Balance Green Gain.
Transmission
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check the product Serial Number
Acknowledgement
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Gain 0 to 254
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
[n][ ][Set ID][ ][OK/NG][Data][x]
56. S/W Version (Command: f z)
59. White Balance Blue Gain (Command: j o)
To check the Software Version.
To set the White Balance Blue Gain.
Transmission
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version
Acknowledgement
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Gain 0 to 254
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
[o][ ][Set ID][ ][OK/NG][Data][x]
57. White Balance Red Gain (Command: j m)
60. Backlight (Command: m g)
To set the White Balance Red Gain.
To adjust the screen backlight.
Transmission
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Acknowledgement
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
80 CONTROLLING THE MULTIPLE PRODUCT
61. PC Power Control (Command: d t)
To control the PC power if the PC and the monitor
are synchronized.
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: Synchronized (When the monitor is off, the PC is
also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
** It may not be supported depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
00: Synchronized (When the monitor is off, the PC is
also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
62. PC Power (Command: d s)
To control the PC power when the PC and the
monitor are not synchronized.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data 00: PC it turned off.
01: PC is turned on.
** It may not be supported depending on the model.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data 00: PC it turned off.
01: PC is turned on.
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to [email protected].
This offer is valid for three (3) years from the
date on which you purchased the product.
Declaration of Conformity
Trade Name: LG
Model: 42WL10MS, 47WL10MS
Responsible Party: LG Electronics Inc.
Address: 1000 Sylvan Ave.
Englewood Cliffs NJ 07632
U.S.A
TEL: 201-266-2534
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
ENERGY STAR is a set of power-
saving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
As an ENERGY STAR Partner LGE U. S. A.,Inc. has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
MODEL
SERIAL
Temporary noise is normal when powering ON or
OFF this device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|