OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
47WX50MF
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
3
56 TROUBLESHOOTING
59 SPECIFICATIONS
62 CONTROLLING THE MULTIPLE
PRODUCT
62
62
62
63
65
Connecting the Cable
RS-232C Configurations
Communication Parameter
Command reference list
Transmission / Receiving protocol
75 IR CODES
Download from Www.Somanuals.com. All Manuals Search And Download.
4
LICENSES
LICENSES
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
5
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
MONITOR
ON
OFF
ENERGY INPUT
SAVING
ꢀ
ꢃ
.
,
!
ꢁ
ABC
JKL
TUV
ꢂ
ꢅ
ꢈ
DEF
GHI
ꢄ
ꢇ
ꢉ
MNO
WXYZ
ꢆ
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
S.MENU
MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
Remote control and Batteries
Power Cord
CD (Owner's Manual,
Software Program, Software
Manual)/Card
D-sub 15 pin signal cable
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ASSEMBLING AND PREPARING
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
Stand kit
Stand
Screw
MP500 kit
CD (Owner's Manual) /
Card
MP500
Screw
NOTE
Please purchase optional accessories separately if necessary.
yy
For more information on the MP500, please refer to the owner's manual provided with the product.
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
7
Parts and Buttons
Illuminance sensor/
IR Receiver
Power Indicator
Screen Marks
Screen Buttons
RGB/AV
USB
DP
DVI IN
DVI OUT
AUDIO
IN
LAN
SPEAKER
/COMPONENT OUT
IN
RGB/AV
/COMPONENT IN
Connection panel
Description
Screen Marks
INPUT
Changes the input source.
MENU
Accesses the main menus, or saves your input and exits the menus.
Adjust the up and down.
Adjusts the volume level.
AUTO/SET
Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
Turns the power on or off.
/ I
Illuminance sensor
IR Receiver
Adjusts the screen brightness by measuring the amount of light.
This is where the unit receives signals from the remote control.
Power Indicator
This Indicator lights up red when the display operates normally(on mode). If the display
In sleep mode (In Power Saving mode), this indicator color changes to amber.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ASSEMBLING AND PREPARING
Connecting the Stand
Portrait Layout
- Only on some models.
- Only on some models.
Place a soft cloth on the table and put the
product with the screen facing downward.
1
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
2
NOTE
Use the specified screw. (M 4.0 mm x Pitch
yy
0.6 mm x Length 9 mm (including spring
washer : 1.8 mm))
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
9
Fix the MP500 on the product using the two
screws provided.
3
Connecting MP500
- Only on some models.
Place a soft cloth on the table and put the
product with the screen facing downward.
Remove the opening cover by unfastening two
screws as shown in the picture.
1
NOTE
Push the MP500 into the compartment to
mount it.
2
Use the screws provided with the product.
yy
(M 3.0 mm x Pitch 0.5 mm x Length 6.0 mm)
Download from Www.Somanuals.com. All Manuals Search And Download.
10 ASSEMBLING AND PREPARING
STORAGE METHOD FOR PANEL PROTECTION
Correct Method
Incorrect Method
Panel
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully
for. Do not let the panel not to touch the floor.
If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
Panel
Cushion
Panel
When laying down the product on the floor, place
it face down on a cushioned flat surface.
Laying down the back of the product may cause
damage to the number keys if they are pressed.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING 11
Moving Handles
Moving the Device in a Vertical Position
Hold the left and right handles on the back of the display.
Left and right handles at
the back
CAUTION
Be careful not to directly touch the panel or expose it to shock when moving the monitor.
yy
Hold the monitor with the handles as the corners of the front panel are sharp, which may cause an
yy
injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the Monitor set.
POWER
MONITOR
ENERGY INPUT
SAVING
ON
OFF
1
4
.
,
!
2
ABC
JKL
TUV
3
6
9
DEF
GHI
5
8
0
MNO
WXYZ
7
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
MENU
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
/ I (POWER)
ENERGY SAVING (
)
Turns the Monitor set on or off.
Adjusts the brightness of
the screen to reduce energy
consumption.
POWER
Monitor On / Off
Turn off the monitor and then
turn it back on.
INPUT
Selects the input mode.
MONITOR
ENERGY INPUT
SAVING
OFF
ON
1/a/A Button
Toggles between numerical
and alphabetical.
ꢀ. , ! ꢁABC ꢂDEF
ꢃGHI ꢄJKL ꢅMNO
Number and Alphabet buttons
Enters numerical or alphabetical
characters depending on the
setting.
ARC
Selects the Aspect Ratio
Mode.
ꢆ ꢇTUV ꢈWXYZ
PQRS
Clear
1/a/A
CLEAR
ꢉ- * #
Deletes the entered numerical
or alphabetical character.
MARK
Volume Up / Down
ARC
Adjusts the volume level.
P
A
G
E
BRIGHT
NESS
PSM
MUTE
Brightness Key
PSM
Selects the Picture Status
Mode.
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to
move to the next file list.
AUTO
MENU
MUTE
Mutes all sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 13
POWER
MONITOR
ON
OFF
ENERGY INPUT
SAVING
1
4
.
,
!
2
ABC
JKL
TUV
3
6
9
DEF
GHI
5
8
0
MNO
WXYZ
7
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
MENU
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
MENU (See p.38)
Accesses the main menus
or saves your input and exit
menus.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
Navigation buttons
Scrolls through menus or
options.
NESS
E
MUTE
AUTO
S.MENU
MENU
S.MENU
OK
Selects menus or options and
confirms your input.
(SuperSign Menu Key)
Allows to select the
SuperSign OSD menu (for
SuperSign input only).
OK
BACK
Allows the user to move back
one step in user interaction
function.
EXIT
BACK
EXIT
TILE
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
ID
ON
OFF
TILE
Selects the TILE Mode.
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
USB Menu control buttons
Controls media playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 USING THE MONITOR SET
USING THE MONITOR SET
RGB Connection
Connecting to a PC
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the 15 pin signal cable as shown the
following illustrations.
Your Monitor set supports the Plug & Play* feature.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
Select RGB input.
Back of the product.
RGB/AV
/COMPONENT OUT
AUDIO
IN
RGB/AV
/COMPONENT IN
NOTE
Macintosh Adapter
(not included)
It is recommended to use the Monitor set
yy
with the HDMI connection for the best image
quality.
Use a shielded signal interface cable, such
yy
as D-sub 15 pin signal cable and DVI/
HDMI cable, with a ferrite core to maintain
standard compliance for the product.
(not included)
If you turn the Monitor set on when the set
yy
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
PC/MAC
PC
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
NOTE
Use the standard Macintosh
yy
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 15
DVI Connection
HDMI Connection
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the DVI cable as shown the following
illustrations.
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
Select DVI input.
Select HDMI input.
Back of the product.
Back of the product.
IN
AUDIO
IN
DVI IN
(not included)
(not included)
(not included)
PC
PC
PC
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode.
Some PCs require you to manually change
the default audio output to HDMI.
If you want to use HDMI-PC mode, you
yy
must set the input label to PC mode.
When HDMI PC is used, a compatiblity
yy
problem might occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 USING THE MONITOR SET
DP Connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the DP cable as shown in the
following illustrations.
Select DP input.
Back of the product.
DP
(not included)
PC
NOTE
Sound may not be available depending on
yy
the DP version of your PC.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 17
Customizing Image Options
Adjusting the Screen
Customize basic and advanced options of each
image mode for the best screen performance.
Selecting an Image Mode
Display images in its optimized settings by
selecting one of the preset image modes.
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
PICTURE and press OK.
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
PICTURE and press OK.
Press the Navigation buttons to scroll to
Picture Mode and press OK.
3
4
5
Press the Navigation buttons to scroll to
Picture Mode and press OK.
3
4
Press the Navigation buttons to scroll to an
image mode you want and press OK.
Press the Navigation buttons to scroll to an
image mode you want and press OK.
Select and adjust following options, and then
press OK.
Mode
Vivid
Description
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, Colour, and sharpness.
Option
Description
Backlight
Adjusts the brightness of the screen
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Standard
Cinema
Adjusts the image for the normal
environment.
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
picture is saturated.
Sport
Game
Optimizes the video image for high and
dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Brightness
Sharpness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark part of the picture is
saturated.
Optimizes the video image for a fast
gaming screen such as PCs or games.
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Color
Tint
Adjusts intensity of all colors.
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 USING THE MONITOR SET
Advanced
Control
Customizes the advanced options.
Refer to the Advanced image options.
Adjusting the Sound
Selecting an Sound Mode
Picture Reset Restores the options to the default
setting.
Play the sound in its optimized settings by
selecting one of the preset sound modes.
When you are finished, press EXIT.
6
Press MENU to access the main menus.
1
2
When you return to the previous menu, press
BACK.
Press the Navigation buttons to scroll to
AUDIO and press OK.
Press the Navigation buttons to scroll to Sound
Mode and press OK.
3
4
Press the Navigation buttons to scroll to a
sound mode you want and press OK.
Customizing PC Display Options
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB[PC] mode.
Mode
Description
Standard
Select when you want standard-quality
sound.
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
PICTURE and press OK.
Music
Cinema
Sports
Game
Select when you listen to music.
Select when you watch movies.
Select when you watch sports events.
Select when you watch sports events.
Press the Navigation buttons to scroll to
Screen and press OK.
3
4
Select and adjust following options, and then
press OK.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Option
Description
Resolution Selects a proper resolution. See
“Customizing PC display options”.
Auto
Sets to adjust the screen position, clock,
and phase automatically.
Config.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default
setting.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 19
Customizing Sound Options
Using Additional Options
Customize options of each sound mode for the
best sound quality.
Adjusting Aspect Ratio
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
Monitor set.
Press MENU to access the main menus.
1
2
Press the Navigation buttons to scroll to
AUDIO and press OK.
Press the Navigation buttons to scroll to Sound
Mode and press OK.
3
4
5
CAUTION
Press the Navigation buttons to scroll to a
sound mode you want and press OK.
If a fixed image displays on the screen for a
yy
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
Select and adjust following options, and then
press OK.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on
the letterboxed area of the screen.
Option
Infinite
Description
LG's Infinity Sound option provides 5.1
channel stereo sound quality from two
speakers.
Sound
Treble
Bass
NOTE
Increases the intensity of the high
frequency part of audio.
You can also change the image size by
yy
accessing the main menus.
Increases the intensity of the low
frequency part of audio.
Reset
Resets the sound mode to the default
setting.
AV Component RGB Display DVI-D
HDMI
MODE
Port
ARC
16:9
PC DTV PC
PC DTV PC
o
x
x
o
o
o
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
Just Scan
1:1
When you are finished, press EXIT.
6
4:3
When you return to the previous menu, press
Zoom
BACK.
Cinema
Zoom
Download from Www.Somanuals.com. All Manuals Search And Download.
20 USING THE MONITOR SET
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom : Choose Cinema Zoom when
you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 21
Using the Input List
Selecting an input source
Press INPUT to access the input source list.
1
2
Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
AV(CVBS)
Description
Watch video from a VCR or other
external devices.
Component Watch the contents in a DVD or
other extemal devices, or through a
digital set-top box
RGB
View a PC display on the screen
Display Port View a PC display on the screen
DVI-D
HDMI
View a PC display on the screen
Watch contents in a PC, DVD
of Digital set-top box other high
definition devices
NOTE
yyIf the PC screen is not displayed on the
monitor that is connected through Display
Port or HDMI, press the Blue button to set the
input label to PC mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 ENTERTAINMENT
ENTERTAINMENT
To set up the network settings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),
Connecting to a Wired Network
(Depending on model)
1
2
Press MENU to access the main menus.
Press the Navigation buttons to scroll to NET-
WORK and press OK.
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustra-
tion and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
3
4
Press the Navigation buttons to select Net-
work Setting and press OK.
If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5
Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP address-
es will need to be input manually.
For detail information, contact your internet pro-
vider or router manual.
- IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.
Back of the product.
LAN
6
When you are finished, press EXIT.
Router
LAN
WAN
Cable modem
CAUTION
ETHERNET
@
yyNetwork setting menu will not be availa-
ble until the display connected to physical
network.
yySince there are various connection meth-
ods, please follow the specifications of
your telecommunication carrier or internet
service provider.
Internet
CAUTION
yyDo not connect a modular phone cable to
the LAN port.
yySince there are various connection meth-
ods, please follow the specifications of
your telecommunication carrier or internet
service provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 23
yyA DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits sub-scription to one device, this display
may not be allowed to connect when a PC is
already connected.)
NOTE
yyIf you want to access the Internet directly
on your display, the internet connection
should always be on.
yyIf you cannot access the Internet, check
the network conditions from a PC on your
network.
yyWhen you use Network Setting, check
the LAN cable or check if DHCP in the
router is turned on.
yyIf you do not complete the network set-
tings, the network may not work properly.
yyThe use of a “Router” may not be allowed or its
usage may be limited depending on the poli-
cies and restrictions of your ISP. For details,
contact your ISP directly.
Tips for Network setting
yyUse a standard LAN cable with this display.
Cat5 or better with a RJ45 connector.
yyMany network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or discon-
nect the power cable of the home network
router or cable modem. Then power on and/or
connect the power cable again.
Network Status
yyDepending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applica-
ble terms of service. For details, contact your
ISP.
1
2
Press MENU to access the main menus.
Press the Navigation buttons to scroll to NET-
WORK and press OK.
yyLG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions as-
sociated with your internet connection, or other
connected equipment.
3
Press the Navigation buttons to select Net-
work Status.
4
5
Press OK to check the network status.
When you are finished, press EXIT.
yyLG is not responsible for problems within your
internet connection.
yyYou may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yySome internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your Internet connection.
Option
Setting
Description
Return to the network setting menu.
Test the current network status after set-
Test
ting the network.
Close
Return to the previous menu.
yyAny fees charged by an ISP including, without
limitation, connection charges are your respon-
sibility.
yyA 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 ENTERTAINMENT
Tips for using USB storage devices
Connecting USB Storage Devices
yyOnly a USB storage device is recognizable.
yyIf the USB storage device is connected
through a USB hub, the device is not recog-
nizable.
Connect USB storage devices such as a USB
flash memory, external hard drive to the display
and use multimedia features (See "Browsing files"
yyA USB storage device using an automatic
recognition programme may not be recog-
nized.
Connect a USB flash memory or USB memory
card reader to the Display as shown on the follow-
ing illustration. The My media screen appears.
yyA USB storage device which uses its own
driver may not be recognized.
yyThe recognition speed of a USB storage
device may depend on each device.
yyPlease do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
or
yyPlease do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
yyPlease use only a USB storage device which
was formatted as a FAT32 file system, NTFS
file system provided with the Windows op-
erating system. In case of a storage device
formatted as a different utility program which
is not supported by Windows, it may not be
recognized.
CAUTION
yyDo not turn the display off or remove a USB
storage device while EMF(my media) Menu
is activated, as this could result in loss of
files or damage to the USB storage device.
yyBack up your files saved on a USB storage
device frequently, as you may lose or dam-
age the files and this may be not covered by
the warranty.
yyPlease connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yyPlease connect a USB storage device with
the cable offered by the device maker.
yySome USB storage devices may not be sup-
ported or operated smoothly.
yyFile alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
yyBe sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 25
yyIf the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
Browsing Files
Access the photo, music, or movie lists and browse
files.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
yyIf your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
Connect a USB storage device.
1
2
3
Press MENU to access the main menus.
Press the Navigation buttons to scroll to My
Media and press OK.
Press the Navigation buttons to choose
from Movie List, Photo List, Music List or
Contents List and press OK.
4
yyIf a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yyIf the USB memory device does not work
properly, disconnect and reconnect it.
yyHow fast a USB memory device is detected
differs from device to device.
Movie List
Photo List
Music List
Contents List
1
2
yyIf the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
yyThe recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
Page 1/1
Photo List
Page 1/1
Drive1
USB External
4
5
001
010
002
003
012
004
013
005
006
015
007
008
009
011
014
yyAny device with more than the recommend-
ed capacity may not work properly.
yyIf a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
Move
View
P
Page Change
Change Numbers
Mark Mode
Exit
To Music List
3
yyUSB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
No.
Description
Moves to upper level folder
Current page/Total pages
1
yyMaximum of 999 folders or files can be rec-
ognized under one folder.
2
3
Corresponding buttons on the
remote control
yyIt is recommended to use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
Current page/ total pages of contents
under the folder focused on
4
5
1
1
Contents under the folder focused on
yyOnly a USB memory stick can be used to
play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
Buttom
Description
Press the green button to toggle between
Green Photo List -> Music List, Music List ->
Button Contents List, Contents List -> Movie
List or Movie List -> Photo List.
yyOnly an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
Yellow A method to view in 5 large thumbnail or
Button simple list.
Blue
Convert to Mark Mode.
Button
yyA USB 3.0 storage device may not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 ENTERTAINMENT
Supported file format
Type
Movie
Supported file format
Music
MP3
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
Bit rate 32 to 320
y
y
y
Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Content
(when
using
SuperSign
Manager)
File Extensions : *.cts/ *.cse
Movie
Video format : DivX3.11, DivX4.12, DivX5.x,
DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03,
Xvid1.10 beta-1/beta-2,
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
Internal Subtitle format : only, XSUB (It is the
File
Item
Profile
subtitle format used in DivX6 files)
Extensions
Photo
JPEG
Photo JPEG
supported
file format
SOF0:
baseline
SOF1:
Extend
Sequential
SOF2:
y
y
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
JPG
PNG
BMP
y
y
You can play JPEG files only.
Non-supported files are displayed in the form
of predefined icon.
y
Progressive
Only 3D Models
Photo size
Bit rate
Min: 64 x 64
Max Type:
1366 x 768
y
y
File
Extensions
Item
Profile
2D
jpeg
jpg
jpe
supported
file format
SOF0:
baseline
SOF1:
y
y
Music MP3
32 kbps to 320
kbps
Sampling
rate
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
Extend
Sequential
SOF2:
y
Progressive
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
photo size
Min: 64 x 64
Max-Normal
Type:
15360 (W) x
8640 (H)
y
y
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
y
y
y
Progressive
Type:
1920 (W) x
1440 (H)
3D
mpo
supported mpo
file format
photo size
4:3 size:
3,648 x 2,736
2,592 x 1,944
2,048 x
1,536
3:2 size:
3,648 x
y
y
2,432
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 27
5
Play a movie.
Viewing Movies
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
NOTE
yyNon-supported files are displayed the preview
image by icon only
yyAbnormal files are displayed in the form of
bitmap
.
1
2
3
4
Press the Navigation buttons to scroll to My
.
Media and press OK.
Press the Navigation buttons to scroll to Movie
List and press OK.
6
Control playback by using the following buttons.
Press the Navigation buttons to scroll to a
folder you want and press OK.
Press the Navigation buttons to scroll to a file
you want and press OK.
01:02:30 / 02:30:25
MENU
Page 1/1
Movie List
Hide
Exit
Option
Page 1/1
Drive1
USB1 USB Drive
001
005
002
006
003
004
Button
r
Description
Stops the playback
Plays a video
s
Move
Play
P
Page Change
Pauses or resumes the playback
Scans backward in a file
t
Change Numbers
Mark Mode
Exit
To Photo list
v
Page 1/1
Scans forward in a file
w
Movie List
Mark Mode
MENU
HIDE
EXIT
Show the Option menu.
Page 1/1
Drive1
USB1 USB Drive
Hide the menu on the full-sized screen.
Return to Movie List.
001
005
002
006
003
004
051. Apple_ ......
02:30:25
Skips to specific points in a file dur-
ing playback. The time of a specific
point will appear on the status bar. In
some files, this function may not work
< or >
Move
Mark
P
Page Change
Mark All
Unmark All
Exit Mark Mode
Exit
Play Marked
properly.
Press the ENERGY SAVING button
ENERGY
SAVING(
repeatedly to increase the brightness
of your screen.
)
Menu
Description
Play Marked
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Deselect all marked movie files.
Exit the Mark Mode.
Unmark All
Exit Mark
Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
28 ENTERTAINMENT
Tips for using playing video files
When you are watching the movie by Movie
yy
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
yySome user-created subtitles may not work
properly.
yySome special characters are not supported
in subtitles.
yyHTML tags are not supported in subtitles.
yySubtitles in languages other than the sup-
ported languages are not available.
yyThe screen may suffer temporary interrup-
tions (image stoppage, faster playback, etc.)
when the audio language is changed.
yyA damaged movie file may not be played
correctly, or some player functions may not
be usable.
Video options
1
Press MENU to access the Pop-Up menus.
2
Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
yyMovie files produced with some encoders
may not be played correctly.
yyIf the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
NOTE
yyHD videos with a maximum of
yyOption values changed in Movie List does
not affect Photo List and Music List.
yyOption value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
yyWhen replaying the video file after stopping,
you can play from where it stopped previ-
ously.
1920x1080@25/30P or 1280x720@50/60P
are supported, depending on the frame.
yyVideos with resolutions higher than
1920X1080@25/30P or 1280x720@50/60P
may not work properly depending on the
frame.
yyMovie files other than the specified types and
formats may not work properly.
yyMax bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yyWe do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yyDTS Audio codec is not supported.
yyA movie file more than 30 GB in file size is
not supported for playback.
yyA DivX movie file and its subtitle file must be
located in the same folder.
yyA video file name and its subtitle file name
must be identical for it to be displayed.
yyPlaying a video via a USB connection that
doesn’t support high speed may not work
properly.
yyFiles encoded with GMC(Global Motion
Compensation) may not be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 29
When you select the Set Video Play,,
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
1
Press the Navigation buttons to scroll to show
the Picture Size, Audio Language, Subtitle
Language or Repeat.
is turned off, it can run the playback if
the file name is similar to the previous
file.
2
Press the Navigation buttons to scroll to make
appropriate adjustments.
Menu
Picture Size
Description
Code Page
Latin1
Support Language
Selects your desired picture
English, Spanish, French,
format during movie play.
German, Italian, Swedish, Finnish,
Dutch, Portuguese, Danish, Roma-
nian, Norwegian, Albanian, Gaelic,
Audio
Changes the Language Group of the
Language
audio during movie play. Files
with a single audio track cannot be
selected.
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Latin2
Subtitle Lan-
guage
Turn on/off the subtitle.
Slovak, Slovenian, Serbian,
Hungarian
Language
Code Page
Sync
Activated for SMI subtitle and
can select the language within the
subtitle.
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Greek
Greek
Turkish
Korean
Turkish
Korean
Position
Size
Changes the position of the
subtitle either up or down during
movie play.
NOTE
Selects your desired Subtitle size
during movie play.
yyOnly 10,000 of sync blocks can be supported
within the subtitle file.
yyWhen playing a video, you can adjust the
Picture Size by pressing the RATIO button.
yySubtitles in your language are only sup-
ported when the OSD menu is also in this
language.
yyThe code page options may be disabled de-
pending on the language of the subtitle files.
yySelect the appropriate code page for the
subtitle files.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 ENTERTAINMENT
Page 1/1
When you select the Set Video,,
Photo List
Page 1/1
009
USB1 USB Drive
Drive1
1
Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
003
012
004
013
005
006
015
007
008
011
014
Move
View
P
Page Change
When you select the Set Audio,,
Change Numbers
Mark Mode
Exit
To Music List
1
2
Press the Navigation buttons to scroll to show
Page 1/1
Photo List
the Sound Mode, Clear Voice II or Balance.
Mark Mode
Page 1/1
009
USB1 USB Drive
Drive1
Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
003
004
013
005
014
006
015
007
008
011
012
Move
Mark
P
Page Change
Mark All
Unmark All
Exit Mark Mode
Exit
View Marked
Viewing Photos
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
Menu
Description
View Marked
Mark All
Display the selected photo file.
Mark all photo files on the screen.
Deselect all marked photo files.
1
2
3
4
Press the Navigation buttons to scroll to My
Media and press OK.
Unmark All
Press the Navigation buttons to scroll to Photo
Exit Mark Mode Exit the Mark Mode.
List and press OK.
Press the Navigation buttons to scroll to a
5
View photos.
folder you want and press OK.
Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
yyNon-supported files are displayed the pre-
view image by icon only
yyAbnormal files are displayed in the form of
bitmap
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 31
Using photo options
Press the ENERGY SAVING button
repeatedly to change the brightness of
your screen.
ENER-
GY SAVING
Use the following options while viewing photos.
y Slide Speed: Selects
a
slideshow
Option
speed (Fast, Medium, Slow).
y TransitionEffect: Set the view mode
of the slideshow.
y BGM: Selects a music folder for the
background music.
NOTE
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Hide
MENU
Option
Exit
Slideshow
BGM
Hides the option window.
To display the options, press OK.
Return to Photo List.
Hide
EXIT
Options
Number of selected photos
Slideshow Starts or stops a slideshow with selected
photos.
If there are no selected photos, all pho-
tos saved in the current folder display
during a slideshow.
Select Option to set the speed and view
mode of the slideshow.
Photo options
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
1
Press MENU to show the Option menus.
You can adjust Option by MENU button
on the remote control.
2
Press the Navigation buttons to scroll to Set
Photo View., Set Video. or Set Audio. and
press OK.
Rotates photos clockwise (90°, 180°,
270°, 360°).
Rotate
NOTE
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
NOTE
yyOption values changed in Movie List does
not affect Photo List and Music List.
yyOption value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
Enlarges the image to 200% or 400%.
Zoom
NOTE
yyZoom to 200% or 400% only
work for image of 1372×772
pixel size or larger.
yyFor image of 960×540 pixel
size or larger, only zoom to
400% works properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 ENTERTAINMENT
When you select the Set Photo View,
1
2
Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.
Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide
Shutter
Fade In
Fades the slide out slowly before playing to the next slide.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 33
When you select the Set Video,
Listening to Music
1
Press the Navigation buttons to scroll to make
appropriate adjustments.
1
2
3
4
Press the Navigation buttons to scroll to My Me-
dia and press OK.
Press the Navigation buttons to scroll to Music
When you select the Set Audio,
List and press OK.
1
2
Press the Navigation buttons to scroll to show
Press the Navigation buttons to scroll to a folder
the Sound Mode, Clear Voice II or Balance.
you want and press OK.
Press the Navigation buttons to scroll to make
appropriate adjustments.
Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
Page 1/1
USB1 USB Drive
Drive1
001.
-
B01.mp3
002. -B02.mp3
00:00
003. B03.mp3
00:00
004.
-
B04.mp3
00:00
00:00
005.
-
B05.mp3
00:00
Move
Play
Mark Mode
P
Page Change
Exit
Change Numbers
To Movie List
Page 1/1
Music List
Mark Mode
Page 1/1
USB1 USB Drive
Drive1
001.
-
B01.mp3
B05.mp3
002. -B02.mp3
00:00
003. B03.mp3
00:00
004.
-
B04.mp3
00:00
00:00
005.
-
00:00
Move
Unmark All
Mark
P
Page Change
Mark All
Play Marked
Exit
Exit Mark Mode
Menu
Description
Play Marked Display the selected music file.
Mark All
Unmark All Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
Mark all music files on the screen.
5
Play music.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 ENTERTAINMENT
Tips for playing music files
This unit cannot support the ID3 Tag
6
Control playback by using the following buttons.
yy
Page 1/1
embedded MP3 files.
Music List
3
file(s) Marked
Drive1
Page 1/1
NOTE
004.
-
B04.mp3
005.
-
B05.mp3
006.
-
B06.mp3
007.
-
B07.mp3
008.
-
B08.mp3
00:00
00:00
00:00
00:00
00:00
005. - B05.mp3
02:30 / 03:25
Hide
yyNon-supported files are displayed the pre-
MENU
Play with Photo
Option
Exit
view image by icon only
yyAbnormal files are displayed in the form of
bitmap
.
.
Button
Description
yyA damaged or corrupted music does not play
but displays 00:00 in playtime.
Stops playing back the file and moves
back to the music list.
Plays a music file
yyA music downloaded from a paid service with
copyright protection does not start but dis-
plays inappropriate information in playtime.
Pauses or resumes playback
Skips to the next file
yyIf you press OK,
buttons, screen saver is
Skips to the previous file
stopped.
When playing,
or
When you press the v button, the previ-
ous music file will be played.
yyThe PLAY( ), Pause( ),
,
,
buttons
on the remote control are also available in
this mode.
When you press the w button, the next
music file will be played.
yyYou can use the
music and the
ous music.
button to select the next
button to select the previ-
Green
Button
Start playing the selected music files and
then move to the Photo List.
Press the ENERGY SAVING button re-
peatedly to change the brightness of
your screen.
ENERGY
SAVING(
)
file name
MENU
Hide
Show the Option menu.
Hides the option window.
002. B02.mp3
00:31 / 04:04
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
Time elapsed /Duration
EXIT
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
< or >
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 35
Music options
Viewing the Contents List
1
Press MENU to access the Pop-Up menus.
Plays back the stored files using the Export option
in SuperSign Manager.
2
Press the Navigation buttons to scroll to Set Au-
dio Play. or Set Audio. and press OK.
1
2
3
4
Press the Navigation buttons to scroll to My
Media and press OK.
Press the Navigation buttons to scroll to Con-
NOTE
tents List and press OK.
yyOption values changed in Movie List does
not affect Photo List and Music List.
yyOption value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
Press the Navigation buttons to scroll to a
folder you want and press OK.
Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Contents List
When you select the Set Audio Play.,
Page 1/1
USB1 USB Drive
Drive1
test1.cts
test2.cts
test3.cts
test4.cts
07/01/2011
07/01/2011
07/01/2011
07/01/2011
1
Press the Navigation buttons to scroll to select
test5.cts
07/01/2011
the Repeat or Random.
Move
Change Numbers
Play
P
Page Change
2
Press the Navigation buttons to scroll to make
appropriate adjustments.
To Movie List
Exit
NOTE
When you select the Set Audio,,
yyWhile playing media files from Contents List,
only the BACK, EXIT or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
yyIf there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
1
2
Press the Navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
Press the Navigation buttons to scroll to make
appropriate adjustments.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 ENTERTAINMENT
DivX® VOD Deregistration
DivX® VOD Guide
You should deregister your device with 8 digit DivX
com/vod.
DivX® VOD Registration
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
1
2
Press MENU to access the main menus.
Press the Navigation buttons to scroll to MY
MEDIA and press OK.
3
4
Press the Blue button.
1
2
Press MENU to access the main menus.
Press the Navigation buttons to scroll to Deacti-
vation and press OK.
Press the Navigation buttons to scroll to MY
MEDIA and press OK.
5
Press the Navigation buttons to select Yes to
confirm.
3
4
Press the Blue button.
Press the Navigation buttons to scroll to DivX
Reg. Code and press OK.
Deregistration code :
********
5
6
View the registration code of your display.
Continue with registration?
When you are finished, press EXIT.
Yes
No
When you return to the previous menu, press
BACK.
6
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device to
play DivX protected videos.
Registration code : **********
Close
NOTE
Once the deregistration is executed, you
yy
must register your device again to see
DivX® VOD contents.
NOTE
yyWhile you are checking the registration
code, some buttons may not work.
yyIf you use the DivX registration code of an-
other device, you cannot play the rented or
purchased DivX file. Make sure to use the
DivX registration code assigned to your TV.
yyThe video or audio files that are not con-
verted by the standard DivX codec may be
corrupted or not be played.
yyThe DivX VOD code allows you to activate
up to 6 devices under one account.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 37
5
Select the PIP or PBP icon from the play list.
Using PIP/PBP
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
sub screens. (See p.48)
1
2
Press the MENU button to move to OPTION
and press OK.
Press PIP/PBP to select PIP or PBP and then
01:02:30 / 02:30:25
MENU
Hide
Exit
Option
press OK.
< Movie List >
PIP/PBP
Pre.
Move
Mode
Position
Size
Off
PIP
PBP
3
Select Movie List or Photo List from My
Media. (With PIP/PBP selected, the Music
List and Contents List are deactivated.)
2/13
Hide
MENU
Option
Exit
Slideshow
BGM
< Photo List >
Movie List
Photo List
Music List
Contents List
6
Select either Main or Sub for sound. You must
to select the output sound before running the
PIP or PBP function.
4
Select a file you want and then press OK.
Page 1/1
Select the sound path.
Movie List
Page 1/1
Drive1
USB1 USB Drive
Main
Sub
001
005
002
006
003
004
7
The sub screen is displayed on the main
screen.
Move
Play
P
Page Change
Change Numbers
Mark Mode
Exit
To Photo list
Download from Www.Somanuals.com. All Manuals Search And Download.
38 CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
Accessing the Main Menus
ARC
UTE
Press MENU to access the main menus.
1
2
AUTO
OK
MENU
S.MENU
Press the Navigation buttons to scroll to one of the following menus and
press OK.
BACK
ID
TILE
EXIT
ON
OFF
Press the Navigation buttons to scroll to the setting or option you want
and press OK.
3
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.39)
Adjusts the image size,
quality, or effect.
AUDIO (See p.42)
Adjusts the sound quality,
effect, or volume level.
TIME (See p.43)
Sets the time, date, or
Timer feature.
PICTURE
AUDIO
TIME
MY MIDIA (See p.24)
Display and play movie,
photo and music content
stored on your USB
OPTION (See p.44)
Customizes the general
settings.
OPTION
NETWORK
MY MEDIA
NETWORK (See p.50)
Sets up the network
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 39
PICTURE Settings
Move
OK
PICTURE
• Aspect Ratio
: 16:9
: Off
ꔋ
Press MENU to access the main menus.
1
2
•
Energy Saving
• Smart Energy Saving : Off
• Picture Mode : Standard
Press the Navigation buttons to scroll to PICTURE and
press OK.
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
70
100
50
50
60
0
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
- To return to the previous level, press BACK.
R
G
C
• Tint
W
• Color Temp.
0
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
• Advanced Control
• Picture Reset
• Screen
The available picture settings are described in the following:
Setting
Description
Changes the image size to view images at its optimal size (See p.19).
Aspect Ratio
Energy
Saving
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Level
Auto
Off
Adjust automatically
Disables Energy Saving function.
Selects the brightness level of the backlight.
Minimum/
Medium/
Maximum
Screen Off
The screen turns off in 3 seconds.
Smart Energy Adjusts the backlight and contrast depending on the screen brightness.
Saving
Level
Off
On
Disables the Smart Energy Saving function.
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Picture Mode
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Cinema
Adjusts the image for the normal environment.
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colours such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 CUSTOMIZING SETTINGS
Setting
Description
SCREEN
(In RGB
Mode Only)
Customizes the PC display options in RGB mode.
Option
Resolution
Auto Configure
Selects a proper resolution. See “Customizing PC display options”.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Picture Mode options
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Sharpness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp .
Advanced Control
Picture Reset
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Customizes the advanced options. Refer to the Advanced image options. (See p.41).
Restores the options to the default setting.
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
yy
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 41
Advanced Control
Setting
Description
Dynamic
Contrast
(Off/High/
Medium/Low)
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (This function can be used
only under AV(CVBS) and Component.)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only under AV(CVBS) and Component.)
Clear White
Make the white area of screen brighter and more white.
(Off/High/Low)
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise
Reduces screen noise without compromising video quality. (This function can be used only under
AV(CVBS) and Component.)
Reduction
(Off/High/
Medium/Low)
Digital Noise
Reduction
This option reduces the noise produced while creating digital video signals.
(Off/High/
Medium/Low)
Gamma
Set your own gamma value. On the monitor, high gamma values display whitish images and low
(High/Medium/ gamma values display high contrast images.
Low)
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - Component, HDMI-DTV)
Download from Www.Somanuals.com. All Manuals Search And Download.
42 CUSTOMIZING SETTINGS
AUDIO Settings
Move
OK
AUDIO
• Clear Voice II
• Balance
: Off
ꔋ
Press MENU to access the main menus.
1
2
L
R
0
• Sound Mode
: Standard
Press the Navigation buttons to scroll to AUDIO and press
OK.
• Infinite Sound: Off
• Treble
• Bass
• Reset
50
50
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
• Digital Audio Input
• Speaker
: On
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
Balance
By differentiating the human sound range from others, it helps users make dialog more clear.
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
Music
The most commanding and natural audio.
Select this option to enjoy the original sound when listening to
the music.
Cinema
Sport
Select this option to enjoy sublime sound.
Select this option to watch sports broadcasting.
To enjoy dynamic sound when playing a game.
Game
NOTE
If sound quality or volume is not at the level you want, it is recommended to
yy
use a separate home theater system or amplifier to cope with different user
environments.
Option
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound
from two speakers.
Treble
Controls the dominant sounds in the output. When you turn up
the treble, it will increase the output to the higher frequency
range.
Bass
Makes the output sound softer. When you turn up the bass, it will
increase the output to the lower Frequency.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI/Display Port: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 43
TIME Settings
Move
OK
TIME
• Clock
ꔋ
Press MENU to access the main menus.
1
2
• Off Time
: Off
: Off
: Off
: Off
• On Time
Press the Navigation buttons to scroll to TIME and press
OK.
• Sleep Timer
• Power On Delay
• Auto Off
: On
Press the Navigation buttons to scroll to the setting or option
3
4
• Automatic Standby : On
you want and press OK.
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sleep Timer
Sets the time to turn on or off the Monitor set.
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
Auto off
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
Once the on or off time is set, these functions operate daily at the preset time.
yy
The scheduled power-off function works properly only when the device time is set correctly.
yy
When the scheduled power-on and power-off times are the same, the power-off time has priority over the
yy
power-on time if the set is turned on, and vice versa if the set is turned off.
The "Auto Off, Automatic Standby" function may not be available depending on the country.
yy
If time has not been reset for a long period of time, tolerance may occur due to environmental
yy
conditions, for example temperature.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 CUSTOMIZING SETTINGS
OPTION Settings
Move
OK
OPTION
• Language
ꔋ
Press MENU to access the main menus.
1
2
• Power Indicator
• ISM Method
• DPM Select
• Fail Over
: Normal
: On
Press the Navigation buttons to scroll to OPTION and press
OK.
: Off
• Factory Reset
• Set ID
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3
4
: 1
• Tile Mode
• PIP/PBP
- To return to the previous level, press BACK.
• Key Lock
: Off
• Product/Service Info.
• Portrait Mode
• Fan
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language
Description
To choose the language in which the control names are displayed.
Use this function to set the power indicator on the front side of the product to On or Off.
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
Power Indicator
ISM Method
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Orbiter
Leave on normal if you don't foresee image burn in being a problem.
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
Fail Over
A user can choose to turn the power saving mode on / off.
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
Factory Reset
Set ID
Select this option to return to the default factory settings.
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 45
Setting
Tile Mode
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position
Size
Moving the screen position horizontally and vertically.
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
Reset
The image is omitted by the distance between the screens to be naturally
shown.
Resets the Tile Mode option.
If selected, it resets the auto configuration.
PIP/PBP
Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
and sub screens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Size
Adjusts the position of the sub screen (top left, bottom left, top right, bottom
right)
The default value is the bottom right.
Adjusts the size of the sub screen (Size 0 to 10).
The default size of PIP (Size: 0) is 480x240; the maximum size 10 is 960x540.
NOTE
The Position and Size options are enabled only in PIP mode.
yy
Key Lock
Turns the local key function on or off. If Key Lock is enabled, the local key does not work.
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
Portrait mode
Rotate OSD clockwise (90°,270°)
Option
90°
Rotate OSD clockwise 90°.
Rotate OSD clockwise 270°.
270°
270°
90°
Download from Www.Somanuals.com. All Manuals Search And Download.
46 CUSTOMIZING SETTINGS
Setting
Description
Fan
Setting
Mode
This option indicates the monitor's internal temperature and controls the fan.
• Auto: Switches the fan on and off according to the set temperature.
• On: The fan is always switched on.
• Manual: Switches the fan on and off according to user settings.
Hysteresis
The difference in temperature between when the fan is switched on and when
it is off.
Set Temperature Set the temperature at which the fan is switched on.
Current
Current temperature inside the set.
Temperature
NOTE
We recommend that you use the Auto mode to prevent any malfunctions
yy
resulting from incorrect fan settings.
If the interior temperature of the set exceeds 80°C, the set will be turned off
yy
automatically for safety reasons.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 47
Tile Mode
This monitor can be tiled with additional monitors to create a large tiled display.
3X3
1X2
2X2
Off
When using 9 monitors
When using 2 monitors
When using 4 monitors
When the Tile Mode
option is disabled
ID 3
ID 6
ID 2
ID 1
ID 2
ID 5
ID 2
ID 1
ID 1
ID 4
ID 4
ID 3
Tile ID
ID 9
ID 8
ID 7
4X4
5X5
When using 25 monitors
When using 16 monitors
ID 3
ID 4
ID 5
ID 2
ID 1
ID 1
ID 5
ID 3
ID 7
ID 4
ID 8
ID 2
ID 6
ID 8
ID 9
ID 10
ID 15
ID 7
ID 6
ID 13
ID 18
ID 23
ID 14
ID 19
ID 24
ID 12
ID 11
ID 16
ID 21
ID 11
ID 15
ID 12
ID 16
ID 10
ID 14
ID 9
ID 20
ID 25
ID 17
ID 22
ID 13
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
Download from Www.Somanuals.com. All Manuals Search And Download.
48 CUSTOMIZING SETTINGS
PIP/PBP
Displays videos or photos stored in the USB device on a single
monitor by dividing it into the main and sub screens. (See p.37)
Mode
NOTE
*PIP(Picture In Picture): Displays the Sub screen
The subscreen is only supported when using the
yy
USB device.
in the main screen.
*PBP(Picture By Picture): Displays the Sub
screen next to the main screen.
Sub
USB
O
Component
Sub
screen
Main
screen
RGB
O
Main
HDMI/DVI-D/Display Port
AV
O
PIP
PBP
X
You can only change the size and position in PIP
yy
mode.
With PBP selected, theAspect Ratio option in the
yy
PICTURE menu is disabled (Fixed as 16:9).
While running the PBP function, the Tile Mode function
Position
yy
does not work.
You must select the output sound before running
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
yy
the PIP or PBP functions. (Select either Main or
Sub.)
If you fail to select Main or Sub from the sound
yy
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
top left
top right
You cannot change the sound while running the
yy
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
The picture quality of the subscreen is set
yy
according to the values selected in the main menu,
not the USB device.
When the power is turned off/on, the PIP/PBP
yy
mode is disabled.
bottom left
Size
bottom right
If you play videos you selected in PIP/PBP mode,
yy
the videos will play back repeately in succession.
The buttons below work in PIP mode.
yy
Button
Photo
Movie
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0 :
480x270
< 1920x1080 >
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 49
Picture ID
Picture ID is used to change the settings of a
specific display using a single IR receiver for
multi-vision. The set receiving the IR signal
communicates with another set via an RS232
connection. Each set is identified by a Set ID. If
you assign the Picture ID using the remote control,
only displays with the same Picture ID and Set ID
can be controlled remotely.
2
If you press the left/right buttons or press the
ON button repeatedly, the Picture ID cycles
through OFF and 0 to 4. Assign the ID you
want.
Picture ID
◀
▶
Off
IR Receiver
Close
1
2
If you assign the Set ID to each set with
yy
RS232C
multi-vision, and then assign the Picture ID
using the red button on the remote control,
the key command is displayed for the set
with the same Set ID and Picture ID. A set
with different Set IDs and Picture IDs cannot
be controlled by IR signals.
Picture ID
Off
Close
For more information on how to assign the
yy
3
4
Set ID, see "Set ID" on page 44.
Please refer to the Installation Manual for
yy
2X2 Multi-Vision (Total Set ID: 4)
more information on Total Set ID assignment.
Set IDs are assigned as shown in the picture.
1
Press the red ON button on the remote control
to assign the Picture ID.
NOTE
For example, if the Picture ID is assigned
yy
to 2, the upper right display (Set ID: 2) can
be controlled by IR signals.
For each set, you can change the
yy
settings for the PICTURE, AUDIO, TIME,
NETWORK and MY MEDIA menus or the
hot keys on the remote control.
BACK
EXIT
TILE
OFF
ID
ON
If you press the green OFF button for
yy
Picture IDs, the Picture IDs for all sets are
turned off. If you then press any button
on the remote control, all sets will start
working again.
Picture ID will be disabled while using the
yy
MY MEDIA menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
50 CUSTOMIZING SETTINGS
NETWORK Settings
Move
OK
NETWORK
• Player Name
ꔋ
Press MENU to access the main menus.
1
2
• Network Setting
• Network Status
• Server IP Setting
• Server IP Status
: Wired
: Not connected
Press the Navigation buttons to scroll to NETWORK and
press OK.
: Not connected
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3
4
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Configure the network settings.
Network Setting
Network Status
Display the network status.
- Internet is connected : Extermally connected
- Home network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 51
MAKING CONNECTIONS
Connect various external devices to the ports on the Monitor set’s back panel.
Find an external device you want to connect to your Monitor set shown on the following illustration.
Check the connection type of the external device.
1
2
3
Go to the appropriate illustration and check the connection details.
HD Receiver
DVD
VCR
AV(CVBS)
HDMI - See p.52
DVI - See p.52
AV(CVBS) - See p.53
Component - See p.53
HDMI - See p.52
DVI - See p.52
AV(CVBS) - See p.53
Component - See p.53
- See p.53
Component
- See p.53
Speaker
USB
Memory storage
– See p.24
PC
Gaming device
Camcorder/Camera
HDMI - See p.15
DVI - See p.15
RGB - See p.14
LAN - See p.54
HDMI - See p.52
DVI - See p.52
AV(CVBS) - See p.53
Component - See p.53
HDMI - See p.52
AV(CVBS)
- See p.53
Component
- See p.53
Display Port - See p.16
NOTE
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
52 MAKING CONNECTIONS
HDMI Connection
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
Back of the product.
DVI Connection
IN
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the DVI cable as
shown in the following illustration. To transmit an
audio signal, connect an optional audio cable.
(not included)
Back of the product.
RGB/AV
DVI IN
AUDIO
IN
/COMPONENT OUT
RGB/AV
/COMPONENT IN
(not included)
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 53
Component Connection
AV(CVBS) Connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the 15
pin signal to RCA cable as shown on the following
illustration.
Back of the product.
Back of the product.
RGB/AV
AUDIO
RGB/AV
/COMPONENT OUT
AUDIO
/COMPONENT OUT
IN
IN
RGB/AV
RGB/AV
/COMPONENT IN
/COMPONENT IN
(not included)
(not included)
(not included)
(not included)
AV (CVBS)
PC
PC
NOTE
NOTE
For AV (CVBS) connection, the red and blue
yy
cables in a shared interface are not in use.
When connecting to the AV or Component
yy
port using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 MAKING CONNECTIONS
Connecting to the LAN
Connecting to a USB
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor set and
access the USB menu to use various multimedia
files.
LAN Connection
Using a router(Switch)
A
LAN
Switch
Monitor Set
PC
or
Using the Internet.
LAN
B
Network
PC
Monitor Set
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 55
Daisy Chain Monitors
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products
RGB Cable
RGB/AV
RGB/AV
RGB/AV
RGB/AV
/COMPONENT OUT
/COMPONENT OUT
/COMPONENT OUT
/COMPONENT OUT
15-pin D-Sub Signal Cable
(Max 3m)
RGB/AV
RGB/AV
RGB/AV
RGB/AV
/COMPONENT IN
/COMPONENT IN
/COMPONENT IN
/COMPONENT IN
Monitor SET 1
Monitor SET 2
Monitor SET 3
Monitor SET 4
DVI Cable
DVI IN
DVI OUT
DVI IN
DVI OUT
DVI IN
DVI OUT
DVI IN
DVI Cable
Monitor SET 1
Monitor SET 2
Monitor SET 3
Monitor SET 4
NOTE
The number of monitors that can be connected to one output may vary depending on signal status
yy
and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to
9 monitors. If you want to connect more than this number of monitors, it is recommended to use a
distributor.
When multi-connecting in/out cascade format, no loss cables are recommended.
yy
DVI OUT does not work when connecting to a third-party product.
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
56 TROUBLESHOOTING
TROUBLESHOOTING
No image is displayed
Problem
Resolution
Is the product power cord
connected?
See if the power cord is properly connected to the outlet.
y
Is the power indicator light on?
See if the power switch is turned on.
May need service.
y
y
Power is on but the screen
appears extremely dark.
Adjust brightness and contrast again.
Backlight may need repair.
y
y
The power indicator amber?
If the product is in power saving mode, move the mouse or press any
y
key.
Turn both devices off and then back on.
y
y
Does the 'Out of range'
message appear?
The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
Does the 'Check signal cable'
message appear?
The signal cable between PC and product is not connected. Check
the signal cable.
Press the 'INPUT' menu in the remote Control to check the input
signal.
y
y
'Unknown Product' message appears when the product is connected.
Problem
Resolution
Did you install the driver?
See if the plug&play function is supported by referring to the video
card user manual.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 57
'Key Lock On' message appears.
Problem
Resolution
The 'Key Lock On' message
appears when pressing the
Menu button.
The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
y
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
y
See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
y
y
Do thin lines appear on the
background screen?
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the
characters look blurred.
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
y
y
The screen is displayed
abnormally.
The proper input signal is not connected to the signal port. Connect
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
Resolution
After-image appears when the
product is turned off.
If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
58 TROUBLESHOOTING
The audio function does not work.
Problem
Resolution
No sound?
See if the audio cable is connected properly.
Adjust the volume.
See if the sound is set properly.
y
y
y
Sound is too dull.
Sound is too low.
Select the appropriate equalize sound.
y
Adjust the volume.
y
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution
(16 colors).
Set the number of colors to more than 24 bits (true color) Select
Control Panel - Display - Settings - Color Table menu in Windows.
y
y
y
Screen color is unstable or
mono-colored.
Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
Resolution
The power suddenly turned off.
Is the sleep timer set?
Check the power control settings. Power interrupted.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 59
SPECIFICATIONS
LCD Panel
Screen Type
1192.78 mm Wide (46.96 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1192.87 mm
Pixel Pitch
0.5414 mm (H) x 0.5414 mm (V)
Video Signal
Max. Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
RGB : 30 kHz to 83 kHz
HDMI/DVI/DP : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI/DVI/DP : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
Input Connector
Power
15-pin D-Sub type, HDMI (digital), RS-232C, LAN, DVI-D,
Display port, USB
Rated Voltage
AC 100-240 V~ 50/60 Hz 2 A
Power Consumption
On Mode : 240 W Typ.
Sleep Mode : ≤ 1 W
Off Mode : ≤ 0.5 W
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 SPECIFICATIONS
Dimensions
(Width x Height x
Depth) / Weight
1070.8 mm X 665.5 mm X 157 mm / 23.9 Kg
1070.8 mm X 720 mm X 293.7 mm / 25.7 Kg
* Speaker Specifications
Audio
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Speaker Impedance
8 Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 61
DTV Mode
Resolution
RGB (PC) supported mode
HDMI/DVI
(DTV)
Horizontal
Resolution
Vertical
Component
Frequency(kHz) Frequency(Hz)
480i
o
o
o
o
o
o
o
x
x
o
o
o
o
o
31.469
31.468
31.469
37.5
70.8
70.8
59.94
75
640 x 350
576i
720 x 400
480p
576p
720p
1080i
1080p
640 x 480
640 x 480
37.879
46.875
49.725
48.363
60.123
44.772
47.7
60.317
75
800 x 600
800 x 600
74.55
60
832 x 624
1024 x 768
1024 x 768
1280 x 720
1280 x 768
1360 x 768
1366 x 768
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
75.029
59.855
60
Power Indicator
Mode
Product
47.72
47.7
59.799
60
On Mode
Sleep Mode
Off Mode
Red
Amber
-
63.981
79.98
65.290
67.5
60.02
75.02
59.954
60
NOTE
PC resolutions available as the input label
yy
option in RGB and HDMI/DVI input mode :
640 x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920
x 1080 / 60 Hz and DTV resolutions : 480p,
720p, 1080p.
HDMI/DVI/Display Port(PC) supported mode
Horizontal
Frequency(kHz) Frequency(Hz)
Vertical
NOTE
Resolution
31.469
37.879
48.363
44.772
47.7
59.94
60.317
60
640 x 480
Vertical frequency: To enable the user to
yy
800 x 600
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
1024 x 768
1280 x 720
1280 x 768
1360 x 768
1366 x 768
1280 x 1024
1680 x 1050
1920 x 1080
59.855
60
47.72
47.7
59.799
60
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
63.981
65.290
67.5
60.02
59.954
60
Download from Www.Somanuals.com. All Manuals Search And Download.
62 CONTROLLING THE MULTIPLE PRODUCT
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 99 without being duplicated.
yy
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
(not included)
PC
Monitor Set 1 Monitor Set 2 Monitor Set 3 Monitor Set 4
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
3-Wire Configurations (Not Standard)
PC
Set
PC
Set
3
2
5
6
4
7
8
3
2
5
6
4
8
7
RXD
TXD
GND
DTR
DSR
RTS
CTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
TXD
RXD
GND
DSR
DTR
CTS
RTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
NOTE
When using 3-wire connections (non-standard), an IR daisy chain cannot be used.
yy
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 63
Command reference list
COMMAND
DATA
(Hexadecimal)
1
2
01. Power
k
x
k
j
a
00H to 01H
02. Input Select
b
c
q
x
g
h
k
i
Refer to ‘02. Input Select’
Refer to ‘03. Aspect Ratio’
Refer to ‘04. Energy Saving’
00H to 04H
03. Aspect Ratio
04. Energy Saving
05. Picture mode
06. Contrast
d
k
k
k
k
k
x
f
00H to 64H
07. Brightness
00H to 64H
08. Sharpness
00H to 64H
09. Color
00H to 64H
10. Tint
j
00H to 64H
11. Color Temperature
12. H Position
u
q
r
00H to 64H
00H to 64H
13. V Position
f
00H to 64H
14. H Size
f
s
u
t
00H to 64H
15. Auto configuration
16. Balance
j
01H
k
d
k
k
d
k
k
f
00H to 64H
17. Sound mode
18. Treble
y
r
01H to 05H
00H to 64H
19. Bass
s
v
e
f
00H to 64H
20. Speaker
00H to 01H
21. Volume Mute
22. Volume Control
23. Time 1(Years/ Months/ Days)
24. Time 2(Hours/ Minutes/Seconds)
25. Off Timer(Repeat mode/ Time)
26. On Timer(Repeat Mode/ Time)
27. On Timer Input
28. Sleep Time
00H to 01H
00H to 64H
a
x
d
e
u
f
Refer to ‘23. Time 1’
Refer to ‘24. Time 2’
Refer to ‘25. Off Timer’
Refer to ‘26. On Timer’
Refer to ‘27. On Timer Input’
00H to 08H
f
f
f
f
f
29. Power On Delay
30. 4 Hours Off
f
h
n
g
i
00H to 64H
m
f
00H to 01H
31. Auto Off
00H to 01H
32. Language
f
Refer to ‘32. Language’
00H to 01H
33. Power Indicator(Standby Light)
34. Power Indicator(Power Light)
35. ISM mode
f
o
p
p
k
d
z
f
00H to 01H
j
Refer to ‘35. ISM Method’
00H to 03H
36. Reset
f
37. Tile Mode
d
d
Refer to ‘37. Tile mode’
FFH
38. Tile Mode Check
Download from Www.Somanuals.com. All Manuals Search And Download.
64 CONTROLLING THE MULTIPLE PRODUCT
COMMAND
DATA
(Hexadecimal)
1
d
d
d
d
d
d
f
2
39. Tile ID
i
Refer to ‘39. Tile ID’
40. Tile H Position
41. Tile V Position
42. Tile H Size
e
00H to 64H
23H to 41H
00H to 32H
00H to 32H
00H to 01H
00H to 01H
00H to 01H
Refer to ‘47. Key’
00H to 01H
FFH
f
g
h
j
43. Tile V Size
44. Natural Mode (In Tile mode)
45. DPM Select
j
46. Remote Lock/ key Lock
47. Key
k
m
k
d
f
m
c
l
48. OSD Select
49. Elapsed time return
50. Serial No. Check
51. S/W Version
l
y
z
FFH
f
FFH
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are
yy
not executed and treated as NG.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 65
Transmission / Receiving protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr] or
[Command1][Command2][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Etner [Set ID] = ‘00(0x00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x] or
[Command2][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
* In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback
presents status about each function.
* Note : In this mode, display will send the acknowledgement after power on processing completion.
There might be a time delay between command and acknowledgement.
* No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to ‘00’(=0x00).
Download from Www.Somanuals.com. All Manuals Search And Download.
66 CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
04. Energy Saving (Command: j q)
To control power On/Off the display.
To control the energy saving function.
Transmission
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
[j][q][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : Power On
Data 00: Off
01: Minimum
02: Medium
03. Maximum
04: Auto
FF : Check status
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
05. Screen Off
* In a like manner, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
* Note: In this modes, display will send the
acknowledgement after power on processing
completion. There might be a time delay between
command and acknowledgement.
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
* There might be some time delays between
command and acknowledgement.
05. Picture Mode (Command: d x)
02. Input Select (Command: x b)
To select the picture mode.
To select input source for display.
Transmission
Transmission
[d][x][ ][Set ID][ ][Data][x]
[x][b][ ][Set ID][ ][Data][Cr]
Data 00: Vivid
01: Standard
02. Cinema
03. Sport
Data 20: AV
40: Component
60: RGB PC
70: DVI-D
04: Game
90: HDMI(DTV)
A0: HDMI(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
03. Aspect Ratio (Command: k c)
06. Contrast (Command: k g)
To adjust the screen format.
To adjust screen contrast.
Transmission
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Data 01: 4:3
02: 16:9
04: Zoom
Acknowledgement
09: Just scan(720p or more)
10 to 1F: Cinema Zoom 1 to16
[g][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 67
07. Brightness (Command: k h)
10. Tint (Command: k j) (Video input only)
To adjust screen brightness.
To adjust screen tint.
Transmission
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Brightness 0 to 100
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint 0 to 100(R50 to G50)
Acknowledgement
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
[j][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k) (Video input only)
11. Color Temperature (Command: x u)
To adjust screen sharpness.
To adjust color temperature.
Transmission
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i) (Video input only)
12. H Position (Command: f q)
To set the Horizontal position.
* Only available for Tile Off mode.
To adjust screen color.
Transmission
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left -50 to Right 50
Acknowledgement
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
[q][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
68 CONTROLLING THE MULTIPLE PRODUCT
13. V Position (Command: f r)
To set the Vertical position.
16. Balance (Command: k t)
To adjust balance.
* Only available for Tile Off mode.
Transmission
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
[f][r][ ][Set ID][ ][Data][Cr]
"0 - 64: min. -50 (bottom) to max. 50 (top)
* The operational range varies depending on the
RGB input resolution.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
To select the sound mode.
Transmission
14. H Size (Command: f s)
To set the Horizontal size.
[d][y][ ][Set ID][ ][Data][x]
* Only available for Tile Off mode.
Data 01: Standard
02: Music
Transmission
03: Cinema
04: Sport
05. Game
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Size -50 to 50
Acknowledgement
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
To adjust treble.
15. Auto Configuration (Command: j u)
To adjust picture position and minimize image
shaking automatically.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
* Only available for RGB input.
Transmission
Acknowledgement
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
[r][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 69
19. Bass (Command: k s)
22. Volume Control (Command: k f)
To adjust bass.
To adjust volume.
Transmission
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Bass 0 to 100
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
[s][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
20. Speaker (Command: d v)
To set the Time 1(Year/ Month/ Day) values.
To select speaker on/off.
Transmission
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[d][v][ ][Set ID][ ][Data][x]
Data 1 00 to 14: 2010 to 2030
Data 2 01 to 0C: January to December
Data 3 01 to 1F: 1 to 31
Data 00: Speaker Off
01: Speaker On
* Enter “fa [Set ID] ff” for checking Time 1 values.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
24. Time 2(Hour/ Minute/ Second) (Command: f x)
21. Volume Mute (Command: k e)
To set the Time 2(Hour/ Minute/ Second) values.
To select screen mute on/off.
Transmission
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[k][e][ ][Set ID][ ][Data][Cr]
Data1 00 to 17: 00 to 23 hours
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2 values.
** This command won’t work if Time 1 has not been
set in advance.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
70 CONTROLLING THE MULTIPLE PRODUCT
25. Off Timer(Repeat Mode/ Time) (Command: f e)
27. On Timer Input (Command: f u)
To set the Off Timer(Repeat mode/ Time) function.
To set the On Timer Input function.
Transmission
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[f][u][ ][Set ID][ ][Data][Cr]
Data1 00: Repeat Off
Data 20: AV
01: Repeat Once
40: Component
02. Repeat Daily
60. RGB
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
90: HDMI
70: DVI
C0: DISPLAY PORT
* Check if Time1 and Time2 and On Timer(Repeat
Mode/Time) functions have been set before setting
this function.
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* Enter “fe [Set ID] ff” for checking Off Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
28. Sleep Time (Command: f f)
To set sleep time.
26. On Timer(Repeat Mode/ Time) (Command: f d)
Transmission
To set the On Timer(Repeat mode/ Time) function.
[f][f][ ][Set ID][ ][Data][Cr]
Transmission
Data 00: Off
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* Enter “fd [Set ID] ff” for checking On Timer(Repeat
mode/ Time) values.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on(unit: second).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: 0 to 100sec.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 71
30. 4 Hours Off (Command: m n)
33. Power Indicator(Standby Light) (Command: f o)
To set the 4 Hours Off function.
To set the Power Indicator(Standby Light) function.
Transmission
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: 4 Hours Off Off
01: 4 Hours Off On
Data 00: Standby Light Off
01: Standby Light On
Acknowledgement
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[o][ ][Set ID][ ][OK/NG][Data][x]
31. Auto Off (Command: f g)
To set the Auto Off function.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
34. Power Indicator(Power Light) (Command: f p)
Data 00: Auto Off Off
01: Auto Off On
To set the Power Indicator(Power Light) function.
Transmission
[f][p][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 00: Power Light Off
01: Power Light On
[g][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data 00: Czech
01: Danish
02: German
03: English
04: Spanish(EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Protuguese(BR)
0C: Russian
35. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 01: Inversion
02: Orbiter
04: White Wash
08. Normal
0D: Finnish
0E: Swedish
0F: Korean
Acknowledgement
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese(Cantonese)
[p][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
72 CONTROLLING THE MULTIPLE PRODUCT
36. Reset (Command: f k)
39. Tile ID (Command: d i)
To execute the Picture, Screen, Audio and Factory
reset function.
To set Tile ID.
Transmission
Transmission
[d][i][ ][Set ID][ ][Data][x]
[f][k][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 01 to 225**
FF: Read Tile ID
** Data could not be set over (Tile Row) x (Tile
Column)
Data 00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
*NG will be return if data is over (Tile Row) x (Tile
Column), except 0xFF.
37. Tile Mode (Command: d d)
To select a Tile Mode Off/ On and Tile Row/ Column
size.
40. Tile H Position (Command: d e)
To set the Tile Horizontal position.
Transmission
*Only available when Tile Natural Mode is off.
[d][d][ ][Set ID][ ][Data][Cr]
Transmission
Data 00 to FF: 1st byte - Tile Column value
2nd byte - Tile Row value
[d][e][ ][Set ID][ ][Data][Cr]
*00, 01, 10, 11 means Tile Mode Off.
Data 00 to 32: Left (-50) to Right (0)
(*Left/Right values depend on Tile H size.)
Acknowledgement
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
[e][ ][Set ID][ ][OK/NG][Data][x]
38. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
41. Tile V Position (Command: d f)
To set the Tile Vertical position.
[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Check Tile Mode status
*Only available when Tile Natural Mode is off.
Transmission
Acknowledgement
[d][f][ ][Set ID][ ][Data][Cr]
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data 0 to 32: Bottom (0) to Top (50)
(*Bottom/Top values depend on Tile V size.)
Data1 00: Tile Mode Off
01: Tile Mode On
Acknowledgement
Data2 00 to 0F: Tile Colume Value
Data3 00 to 0F: Tile Row Value
[f][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 73
42. Tile H Size (Command: d g)
To set the Tile Horizontal Size.
*Set Tile H Position to 0x32 (50) before setting Tile H
Size.
45. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
*Only available when Tile Natural Mode is off.
[f][j][ ][Set ID][ ][Data][x]
Transmission
Data 00: DPM Select Off
01: DPM Select On
[d][g][ ][Set ID][ ][Data][x]
Data 00 to 32: 0 to 50
Acknowledgement
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
[g][ ][Set ID][ ][OK/NG][Data][x]
46. Remote Controller Lock/ Key Lock
(Command: k m)
To lock the remote control and the front panel control
keys on the display.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
43. Tile V Size (Command: d h)
To set the Tile Vertical size.
Data 00: Lock off
01: Lock on
*Set Tile V Position to 0x00 before setting Tile V
Size.
*Only available when Tile Natural Mode is off.
* If you are intended not to use the remote controller
and front panel control keys on the display for kind of
reasons, use this mode. Remote controller Lock/ Key
Lock will be released automatically after display is
rebooted.
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
Transmission
[d][h][ ][Set ID][ ][Data][x]
Data 00 to 32: 0 to 50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
47. Key (Command: m c)
44. Natural Mode (In Tile Mode) (Comman : d j)
To send IR remote control code.
To set the Tile Natural mode.
Transmission
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
[d][j][ ][Set ID][ ][Data][x]
Data 00: Off
01: On
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Acknowledgement
When display is in the standby mode, display will turn
on by Power button of remote control only.
[j][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
74 CONTROLLING THE MULTIPLE PRODUCT
48. OSD Select (Command: k l)
51. S/W Version (Command: f z)
To select OSD(On Screen Display) on/off
To read the software version.
Transmission
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
[f][z][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off
01: OSD On
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
[l][ ][Set ID][ ][OK/NG][Data][x]
49. Elapsed time return (Command: d l)
To read the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][x]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
50. Serial No.Check (Command: f y)
To read the serial numbers.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
IR CODES 75
IR CODES
All models do not support the HDMI/USB function.
yy
Code (Hexa)
Function
Energy Saving (
POWER
INPUT
Note
95
)
R/C BUTTON
R/C BUTTON (ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
08
0B
C4
C5
43
Monitor On
Monitor Off
MENU
40
Up ( )
41
Down ( )
Left ( )
07
06
Right ( )
OK( )
44
28
BACK(
EXIT
)
5B
4D
02
PSM
Volume
Volume
MUTE
03
09
E0
E1
10 to 19
72
Bright (Page UP)
Bright (Page Down)
Number Key 0 to 9
Red Key (ID ON)
Green Key (ID OFF)
Yellow Key
71
63
61
Blue Key
7B
76
TILE
ARC (4:3)
77
ARC (16:9)
AF
79
ARC (ZOOM)
ARC (MARK)
Auto Config.
99
B1
B0
BA
8F
8E
Download from Www.Somanuals.com. All Manuals Search And Download.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
ENERGY STAR is a set of power-
saving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
As an ENERGY STAR Partner LGE U. S. A.,Inc. has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
MODEL
SERIAL
Temporary noise is normal when powering ON or
OFF this device.
Download from Www.Somanuals.com. All Manuals Search And Download.
|