80-B6426-2ES, Rev. -
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC/IC Notice
phone while operating can be well below the
m axim um value. This is because the phone is
designed to operate at m ultiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a wireless base station
antenna, the lower the power output.
This device com plies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device m ay not cause harm ful interference,
and (2) this device m ust accept any interference
received, including interference that m ay cause
undesired operation.
Before a phone m odel is available for sale to the
public, it m ust be tested and certified to the FCC that
it does not exceed the lim it established by the
governm ent-adopted requirem ent for safe
To com ply with FCC radiation exposure
requirem ents, use of this device for body-worn
operational configurations is lim ited to accessories
tested and approved by Kyocera Wireless Corp.
Other accessories used with this device for body-
worn operations m ust not contain any m etallic
com ponents and m ust provide at least 22.75m m
separation distance including the antenna and the
user’s body.
exposure. The tests are perform ed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each m odel. The highest
SAR value for this m odel phone when tested for use
at the ear is 1.53 and when worn on the body, as
described in this user guide, is 0.74. (Body-worn
m easurem ents differ am ong phone m odels,
depending upon available accessories and FCC
requirem ents). SAR value shown is worst case value
for a QCP 2035. A typical SAR value for QCP 2035
when tested for use at the ear is 1.13 W/kg and when
worn on the body, as described in this user guide, is
0.505 W/kg. (Body-worn m easurem ents differ
am ong phone m odels, depending upon available
accessories and FCC requirem ent). The highest SAR
value when tested for use at the ear is 1.5 W/kg and
when worn on the body, as described in this user
guide, is 1.48 W/kg. This is the worst case value.
While there m ay be differences between the SAR
levels of various phones and at various positions,
they all m eet the governm ent requirem ent for safe
exposure. The FCC has granted an Equipm ent
Authorization for this m odel phone with all reported
SAR levels evaluated as in com pliance with the FCC
RF em ission guidelines. SAR inform ation on this
m odel phone is on file with the FCC and can be
found under the Display Grant section http://
OVFQCP 2035. Additional inform ation on SAR can
be found on the Cellular Telecom m unications
Industry Association (CTIA) web-site at http://
This m odel phone m eets the governm ent’s
requirem ents for exposure to radio waves.
Your wireless phone is a radio transm itter and
receiver. It is designed and m anufactured not to
exceed the em ission lim its for exposure to
radiofrequency (RF) energy set by the Federal
Com m unications Com m ission of the U.S.
Governm ent. These lim its are part of
com prehensive guidelines and establish perm itted
levels of RF energy for the general population. The
guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of
scientific studies. The standards include a
substantial safety m argin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless m obile phones
em ploys a unit of m easurem ent known as the
Specific Absorption Rate, or SAR. The SAR lim it set
by the FCC is 1.6W/kg.* Tests for SAR are conducted
using standard operating positions specified by the
FCC with the phone transm itting at its highest
certified power level in all tested frequency bands.
Although the SAR is determ ined at the highest
certified power level, the actual SAR level of the
Download from Www.Somanuals.com. All Manuals Search And Download.
* In the United States and Canada, the SAR lim it for
m obile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial m argin of safety to give
additional protection for the public and to account for
any variations in m easurem ents.
Aircraft—FCC regulations prohibit using your phone on a
plane that is in the air. Turn your phone off before
boarding aircraft.
Vehicles—RF signals m ay affect im properly installed or
inadequately shielded electronic system s in m otor
vehicles. Check with the m anufacturer of the device to
determ ine if it is adequately shielded from external RF
energy. Your physician m ay be able to help you obtain
this inform ation.
Blasting areas—Turn off your phone where blasting is in
progress. Observe restrictions, and follow any
regulations or rules.
Potentially explosive atmospheres—Turn off your phone
when you are in any area with a potentially explosive
atm osphere. Obey all signs and instructions. Sparks in
such areas could cause an explosion or fire, resulting in
bodily injury or death.
Caution
The user is cautioned that changes or m odifications not
expressly approved by the party responsible for
com pliance could void the warranty and user’s authority
to operate the equipm ent.
Warning
Use only Kyocera approved accessories with Kyocera
phones. Use of any unauthorized accessories m ay be
dangerous and will invalidate the phone warranty if said
accessories cause dam age or a defect to the phone.
Use the following guidelines to optim ize the
perform ance and life of your phone, antenna, and
battery.
Areas with a potentially explosive atm osphere are often,
but not always, clearly m arked. They include:
•
•
•
•
fueling areas such as gas stations
below deck on boats
ACN 093 453 037
transfer or storage facilities for fuel or chem icals
vehicles using liquefied petroleum gas, such as
propane or butane
Road safety comes first
While driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good
judgm ent m ust be exercised at all tim es. Check the local
laws and regulations on the use of wireless phones in
vehicles. Always obey them , and exercise caution while
driving.
•
•
areas where the air contains chem icals or particles
such as grain, dust, or m etal powders
any other area where you would norm ally be advised
to turn off your vehicle engine
Use with care
Use only in norm al position (to ear). Don’t bend the
antenna or touch it unnecessarily. Pull out the antenna
when on a call and push it in when the phone is not in
use. Avoid dropping, hitting, bending, or sitting on the
phone.
Air bags
If you have an air bag, DO NOT place installed or
portable phone equipm ent or other objects over the air
bag or in the air bag deploym ent area. If equipm ent is
not properly installed, you and your passengers risk
serious injury.
Keep phone dry
If the phone gets wet, turn the power off im m ediately
and return it to the dealer for service.
Potentially unsafe areas
Posted facilities—Turn your phone off in any facility when
posted notices require you to do so.
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the phone
If the screen seem s frozen and the keypad does not
respond to keypresses, return it to the dealer for
service.
Radio frequency (RF) energy
Your telephone is a radio transm itter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
Qualified service
Changes or m odifications not expressly approved
by the party responsible for com pliance could void
the warranty and the user’s authority to operate the
equipm ent.
In August 1996, the U.S. Federal Com m unications
Com m ission (FCC) adopted RF exposure guidelines
with safety levels for hand-held wireless phones.
These guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies in the following
reports:
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories m ay be dangerous and will invalidate
the phone warranty if said accessories cause
dam age or a defect to the phone.
•
•
•
ANSI C95.1 (Am erican National Standards
Institute, 1992)
NCRP Report 86 (National Council on Radiation
Protection and Measurem ents, 1986)
ICNIRP (International Com m ission on Non-
Ionizing Radiation Protection, 1996)
To shop online for a Hands-free Car Kit and other
phone accessories, visit
call (800) 211-1537 (U.S.A. only) or (510) 683-4004.
Your phone com plies with the standards set by
these reports and the FCC guidelines.
Kyocera Wireless Corp.
10300 Cam pus Point Drive, San Diego, CA 92121
U.S.A.
To purchase accessories, visit
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1
Messaging . . . . . . . . . . . . . . . . . . .22
Accessories . . . . . . . . . . . . . . . . . .24
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Alarm Clock . . . . . . . . . . . . . . . .25
Tip Calculator . . . . . . . . . . . . . . .25
Calculator . . . . . . . . . . . . . . . . . .25
Countdown Timer . . . . . . . . . . .26
Stopwatch . . . . . . . . . . . . . . . . . .26
Brick Attack™ . . . . . . . . . . . . . . .27
Messages . . . . . . . . . . . . . . . . . . . . . . . . . 28
Retrieving messages . . . . . . . . . . .28
Sending messages . . . . . . . . . . . . .29
Message delivery options . . . . . . .31
Erasing messages . . . . . . . . . . . . .32
Troubleshooting messages . . . . . .32
Web Browser. . . . . . . . . . . . . . . . . . . . . . 34
Using the Web Browser . . . . . . . .34
Indicators and alerts . . . . . . . . . . .35
Troubleshooting. . . . . . . . . . . . . . . . . . . . 36
Installing the battery . . . . . . . . . . .1
Screen icons . . . . . . . . . . . . . . . . . .3
Menus . . . . . . . . . . . . . . . . . . . . . . .4
Basic functions . . . . . . . . . . . . . . . .5
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Working with contact cards . . . . .9
Speed dialing and 1-Touch
Dialing . . . . . . . . . . . . . . . . . . . . .11
Working with the Recent
Calls list . . . . . . . . . . . . . . . . . . . .12
Entering letters, numbers, and
symbols . . . . . . . . . . . . . . . . . . . .13
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Silence All . . . . . . . . . . . . . . . . . .17
Keyguard . . . . . . . . . . . . . . . . . . .17
Sounds . . . . . . . . . . . . . . . . . . . . .18
Display . . . . . . . . . . . . . . . . . . . . .18
Security . . . . . . . . . . . . . . . . . . . .18
Call Information . . . . . . . . . . . . . .20
Network . . . . . . . . . . . . . . . . . . . .20
Extras . . . . . . . . . . . . . . . . . . . . . .22
5
6
2
3
4
7
8
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
1
GETTING STARTED
4. Lay the keypad
flat inside the
Installing the battery
1. Hold the phone face
down in your palm with
the antenna pointing
faceplate. Align
the slots in the
phone to the
posts on the
down. Place your thumb
on the ridges of the
faceplate, and close until they are
latched together.
battery door. Push down
with your thumb and
5. Place the phone
slide the door away from you until it
stops (about 1/2 inch or 1.27
centimeters).
face down on a flat
surface. Align the
battery door to the grooves on the
side of the phone. Slide the battery
door on while pressing down firmly,
ensuring that the battery door clicks
into place. Check and repeat if the
battery door is not aligned. Do not
force.
2. Move your thumb to the
side of the phone, then
slide the door off the
phone.
3. Place the battery with
the metal contacts
facing down and
Note—Before using your phone, fully
charge the battery (see page 7).
towards the bottom of
the phone.
User’s Guide for the QCP 2035 Phone
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Jack for Hands-free headset (sold separately) only.
Home screen. Press (item 9) to select Menu.
8
Clear key erases the last character in text entry, or
returns to the previous menu.
4
Navigator key adjusts volume when in a call; scrolls
up, down, left, or right through lists and menus; and
positions the cursor during text entry.
1
2
5
6
7
8
Send/Talk key starts or answers a call.
Menu
Use the keypad to enter numbers, letters, or symbols.
Shift key changes case in text entry.
Extend the antenna to make or answer a call. Push in
the antenna when the phone is not in use.
3
4
5
9
9
Select key selects a menu item or option.
10
10
End/Power key turns on and turns off the phone, ends
a call, or returns to the home screen.
11
12
Space key enters a space during text entry.
0 key cycles through word choices during T9® text
entry (available in English only).
6
7
11
12
13
Jacks for AC Adapter (included) and data cable (sold
separately) only.
Warning: Inserting an accessory into the incorrect jack
may damage the phone.
13
2
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen icons
The following icons may appear on your
phone screen:
Enhanced CDMA voice privacy is
on, if available from your service
provider. This icon also indicates
when you are in a secure web
browser session.
The phone is operating in CDMA
digital mode.
The battery is fully charged. The
more black bars you see, the
greater the charge.
The phone is receiving a signal.
You can make and receive calls.
The phone is not receiving a
signal. You cannot make or
receive calls.
Press
up.
Press
Press
Press
down.
A call is in progress.
.
The alarm clock is set.
to select an item.
The phone ringer is silenced. The
phone vibrates or lights up
instead of ringing.
Enter text using T9 rapid text
entry (available in English only).
®
Enter text using normal alpha text
entry.
The phone is outside of its home
area.
Enter symbols.
You have a new text message,
voicemail message, or page.
Enter numbers.
User’s Guide for the QCP 2035 Phone
3
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Messaging
Accessories
Tools
Alarm Clock
Tip Calculator
Calculator
Countdown Timer
Stopwatch
Brick Attack
Messages
Voice
Send New
Send Preformat
Text InBox
Net Alerts
Text OutBox
Filed
Erase Msgs
Msg Settings
Phone Info
Phone Number
Roaming/Service Status (appears only
if roaming)
Menus
To view any of these menus from the
home screen, press
Press left or right to see different
menus. From any menu, press
select a menu option.
to select Menu.
•
•
•
•
•
•
to
Web Browser
Contacts
•
•
•
•
•
•
•
View All
Add New
Find Name
Speed Dial List
Business List
Personal List
Info
•
•
•
•
•
•
•
•
•
Recent Calls
Settings
•
•
•
•
•
•
•
•
Silence All
Keyguard
Sounds
Display
Security
Call Information
Network
Extras
•
•
4
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Using menus
To turn on the phone
• Press . ¤and the home screen
•
From the home screen, press
to
left or
select Menu, then press
right to see menus.
appear when the phone is turned on
and is ready to make or receive a call.
•
•
Press
item.
to select a menu or menu
To turn off the phone
Hold down
appears (about three seconds).
•
until “Powering off”
Once you have selected a menu, press
up or down to scroll through
the menu items.
Press
the current menu.
To find your phone number
•
From the home screen, select Menu 3
Phone Info. Your phone number
appears.
•
•
•
to return to the top level of
Press
screen.
to return to the home
To make a call
1. Extend the antenna.
2. Enter the phone number.
In this guide, 3tells you to select an
option from a menu. For example,
Menu 3 Settings means select Menu,
then the Settings menu.
3. Press
.
.
To end a call
•
Press
Basic functions
To answer a call
Press
This document describes the QCP 2035
trimode phone by Kyocera, with CDMA
digital service at 800 MHz and 1900 MHz,
and analog service at 800 MHz.
•
.
To silence the ringer or alert
•
To silence the ringer or stop the
vibration alert during an incoming
call, press
. Press
to answer
User’s Guide for the QCP 2035 Phone
5
Download from Www.Somanuals.com. All Manuals Search And Download.
the call. (To silence all sounds, see
“Silence All” on page 17).
baseline. You can adjust the
volume manually during a call.
Disabled keeps the volume level
the same unless you adjust it
–
To mute and unmute during a call
•
•
To turn Mute on, press
To turn Mute off, press
UnMute.
.
using
e. Press
.
to select
to save the setting.
To adjust the volume
•
To manually adjust the earpiece
volume during a call, press
or down.
up
accidental keypresses when you are
not in a call, press up and hold
.
•
To automatically adjust the earpiece
volume based on the amount of noise
around you or the other person’s
voice volume level, follow these steps:
a. Place a call from a quiet
To unlock the keypad
•
Press
3
3
in this
order.
environment.
b. Press
up or down to set the
volume to a comfortable level.
c. Select Menu 3Settings 3
Sounds 3Smart Sound.
d. Select an option.
–
Enabled adjusts the volume
automatically. The volume you
have just set is used as a
6
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2
BATTERY
Your phone comes with an internal/
removable lithium ion (LiIon) battery.
The battery is partially charged when you
receive the phone. Before using your
phone, fully charge the battery. Connect
the AC Adapter to the proper jack on the
bottom of the phone as shown below,
then connect the adapter’s plug to a wall
outlet.
Power-save mode
Your phone switches to power-save
mode after several unsuccessful attempts
to locate a signal. When the phone is in
power-save mode, you cannot make or
receive calls, and “Power Save Mode” and
appear on the screen. Press any key to
exit.
Battery guidelines
•
Do not disassemble, puncture, or
short-circuit the battery.
•
If you have not used the battery for
more than a month, recharge it before
using your phone.
Note—You must have at least a partial
charge in the battery to make or receive
calls, regardless of whether or not the AC
Adapter is connected to the phone. The
battery icon is animated as the battery is
charging. The battery is fully charged
•
•
Avoid extreme temperatures, direct
sunlight, and high humidity.
Never dispose of any battery in or
near a fire. It could explode.
Important
when the battery icon looks like
You can safely recharge the battery at any
time, even if it has a partial charge.
.
If the battery is expired or not installed in
the phone, you may not be able to make
an analog call. If you experience this
User’s Guide for the QCP 2035 Phone
7
Download from Www.Somanuals.com. All Manuals Search And Download.
condition, charge the battery to make an
analog call.
more power to acquire service than to
maintain service.
•
•
The earpiece and ringer volume
settings are high. To adjust the
earpiece volume, see “To adjust the
volume” on page 6. To adjust the
ringer volume, select Menu 3Settings
3Sounds 3Ringer Volume, and press
left to lower the volume.
Tips for improving battery
performance
Before using your phone, fully charge the
battery.
The following functions may drain the
battery more quickly:
•
Backlighting is frequently on. (To
adjust backlighting, select Menu 3
Settings 3Display 3Backlighting, then
select an option such as 10 seconds or
30 seconds.)
Check how often voicemail
notifications, pages, and text
messages are received, and how
quickly they are acknowledged. To
use power most efficiently,
acknowledge notifications and
messages immediately.
•
The phone is frequently used in
analog mode. If
is not visible on
your home screen, you are in analog
mode. (To set your phone to operate
in different modes, see “To select
digital or analog mode” on page 20).
You are far away from a base station or
cell site when in digital mode.
Data cables or accessories are
connected to the phone.
Service is not available or is available
intermittently. The phone requires
•
•
•
8
Battery
Download from Www.Somanuals.com. All Manuals Search And Download.
3
CONTACTS
Use your phone’s Contacts directory like
a set of phone index cards to store
information about a person or company.
Before using the Contacts directory, see
“Entering letters, numbers, and symbols”
on page 13.
down to select an option from the
list:
–
–
–
–
Save—Save information and
return to the home screen.
Number Type—Select work,
home, mobile, pager, or fax.
Speed Dialing—Select a speed
dialing location from the list.
Secret—Select Yes to lock the
phone number. If a phone
number is locked, you must
enter your four-digit lock code
to view or edit the number.
Select No to leave the number
unchanged.
Working with contact cards
To save a phone number
1. From the home screen, enter the
phone number you want to save.
2. Press
to Save New.
Note—To add to an existing contact,
select Add to... after you enter the number.
Select the contact you want to add to,
then proceed to step 4.
3. Enter a name for the contact. If you
need to know how to use the keypad
to enter letters, see page 13.
–
–
Primary Number—Classify this
number as the primary number
for the contact.
Classify Contact—Classify the
contact as business or personal.
4. Press
to Save.
-or-
5. If finished, press
to select Save. A
• Press
right, then press
message appears: “Contact
Successfully Saved!”
to select Options. Press
up or
User’s Guide for the QCP 2035 Phone
9
Download from Www.Somanuals.com. All Manuals Search And Download.
-or-
5. Enter the new information.
6. If finished, press
to select Save.
If you want to continue entering
information, select another option.
You can also save a phone number
through the Contacts directory as
follows:
To erase information from a contact card
1. From the home screen, select
Menu 3Contacts 3View All.
2. Press
to select a card.
1. From the home screen, select
Menu 3Contacts 3Add New.
2. Select Phone Number.
3. Enter the phone number up to as
many digits as will fit on the screen.
4. Select Next.
3. Select Options to edit the entire
contact card, or select the specific
information (such as the phone
number) you want to edit.
4. To erase the entire contact card, select
Erase Contact. To erase specific
information, select Erase.
5. Proceed to step 3 in “To save a phone
number” on page 9.
5. If finished, press
to select Exit.
To edit a contact card
1. From the home screen, select Menu 3
To search the Contacts directory
The Contacts directory lists entries
alphabetically. You can search through a
list of all contacts, speed dialing entries,
or cards of a specific type, or you can
enter the name you are searching for.
1. From the home screen, select
Menu 3Contacts.
Contacts.
2. Find the contact you want to edit by
selecting either View All or Find Name.
3. Press
to select the contact card
you want to edit.
4. Select Options to edit the entire
contact card, or select the specific
information (such as the phone
number) you want to edit.
2. Press
method:
down to select a search
10
Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
• To search a list of names, select
View All, Speed Dialing List, Business
List, or Personal List.
number by entering the memory location
and pressing
.
To set a speed dialing location
1. Open a saved contact card.
2. Select the phone number to assign a
speed dialing location.
-or-
• To search for a specific name,
select Find Name and enter all or
part of the name. A list of matching
names appears.
3. Select Speed Dialing.
4. Select a speed dialing location.
(Note—Speed dialing location “1” is
reserved for your voicemail number).
3. Press
name you want.
• To call the contact, select the
number and press
• To display the full contact card,
press
down until you find the
5. Press
to Assign.
.
To remove a speed dialing location
1. From the home screen, select
Menu 3Contacts 3Speed Dialing List.
.
To call from the Contacts directory
1. From the home screen:
2. Press
location.
3. Press
remove.
to select the speed dialing
Select Menu 3Contacts 3View All.
-or-
to select the number to
4. Select Speed Dialing.
Press
down.
5. Choose a speed dialing location and
2. Select a name from the list.
3. Select the number and press
press
right to select Remove.
.
6. Press
.
Speed dialing and 1-Touch Dialing
Speed dialing and 1-Touch Dialing allow
you to quickly dial a stored phone
User’s Guide for the QCP 2035 Phone
11
Download from Www.Somanuals.com. All Manuals Search And Download.
types may not be available on all phones.
Check with your service provider.)
To speed dial
•
From the home screen, enter the one-
or two-digit speed dialing number and
Call to
press
.
Call from
To call your voicemail number
•
From the home screen after receiving
a notification, press and hold your
voicemail speed dialing number. (
is the default.)
Three-way call
Forwarded call
Call waiting
To enable 1-Touch Dialing
1. Select Menu 3Settings 3Extras 3
Missed call
1-Touch Dialing 3Enabled.
2. Press
.
To view the Recent Calls list
1. From the home screen, select
Menu 3Recent Calls.
2. To view details about a call, select a
call entry.
To use 1-Touch Dialing
•
Enter the one- or two-digit speed
dialing number and hold down the
last number. For example, if the speed
3. Select an option (Save New, Add to,
Time, or Number).
dialing number is 15, press
press and hold
To redial the last number called
Press twice.
, then
.
4. Press
.
Note—If the number has been saved as
“secret,” you will need to enter your four-
digit lock code to view or edit the
number. For more information about
secret phone numbers, see page 9.
•
Working with the Recent Calls list
The Recent Calls list shows the last 15
calls. Calls are identified by type. (Some
12
Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
Note—If you are sending a new or
preformatted text message (see
To dial from the Recent Calls list
1. From the home screen, select
Menu 3Recent Calls.
page 30),
letter of each sentence is capitalized.
To return to text entry mode,
press
indicates that the first
2. Select the call entry in the list, and
press
3. Press
to display the call detail.
to call the number.
•
.
Entering letters, numbers, and
symbols
You can enter letters, numbers, and
symbols in a contact card or text
message. The default text entry mode is
.
To change text entry modes
1. From the text entry screen, press
to highlight the options at the bottom
of the screen.
2. Press
right to highlight the
current text entry mode, and press
to select it.
3. A list of text entry modes appears.
•
•
To enter spaces, press
To move the cursor, press
or left.
.
right
Press
list.
down to scroll through the
•
•
To erase single characters, press
To erase all characters, press and
hold
To capitalize the next letter, press
appears).
To capitalize every letter, press
twice ( appears).
To capitalize the first letter of each
.
4. Press
Shortcuts
to select a text entry mode.
.
•
To change text entry modes, press and
hold
•
•
•
.
(
•
To change capitalization modes, press
once.
word, press
appears).
three times (
User’s Guide for the QCP 2035 Phone
13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Press a key several times to cycle
through the letters and show the
number on the key. For example, to
To use text entry modes
To enter letters in
mode:
1. Press the key once for the first letter,
twice for the second letter, and so on.
2. After the cursor moves right, enter
the next letter.
enter a 2, press
four times.
To change language and enter special
characters
To enter words in
rapid text entry
Your phone may support English, French,
or Spanish languages. If you select
English, enter the letters printed on the
keys. If you select another language, you
can also enter letters with other marks.
The special characters corresponding to
each key are shown here:
®
mode (available in English only):
1. Press each letter key once. For
example, to enter the word “how,”
press keys
2. Press
3. Press
3
3
.
to cycle through words.
right when you see the
word you want.
To enter symbols in
French
mode:
A À Â B C Ç 2
D E Ë È É Ê F 3
G H I Ï Î 4
M N O Ô Œ 6
T U Ü Ú V 8
1. Press
symbols.
2. Press the number key corresponding
to the symbol you want.
down through the list of
3. To exit the list without entering a
symbol, press
.
To enter numbers in
mode:
•
Press a key once to enter the number
on the key.
To enter numbers in
mode:
14
Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
a voicemail extension or calling card
number.
1. Enter the first portion of the phone
number.
Spanish
A Á B C 2
D E É F 3
G H I Í 4
M N Ñ O Ó 6
T U Ü Ú V 8
2. Press
right through the list of
options at the bottom of the screen.
3. Press
to select a type of pause.
appears in the phone
To select a language
– A
1. From the home screen, select
Menu 3Settings 3Display 3Language.
number for a time pause.
– A
appears in the phone
2. Select a language and press
.
number for a hard pause.
3. Press the appropriate keys to enter
special characters.
4. Enter the remaining numbers.
To enter pauses
You can include a pause in a phone
number. A timed pause causes the phone
to stop dialing for two seconds. A hard
pause causes the phone to stop dialing
until you select Release.
When you save the phone number of an
automated service, such as voicemail,
you may include a pause where you
would be required to select an option or
enter a password. For example, you could
enter a phone number, then a pause, then
User’s Guide for the QCP 2035 Phone
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4
SETTINGS
The Settings menu includes the following
options.
Silence All
• Business Call Ring
• Personal Call Ring
• Minute Alert
• No, normal
Display
• Yes, vibe only
• Yes, lights only
• Information
• Backlighting
• My Banner
• Auto-Hyphenation
• Language
Keyguard
• Guard Now
• Time/Date Format
• Main Menu View
• Display Contrast
• 30s auto-guard
• 1m auto-guard
• 5m auto-guard
• Auto-guard off
Sounds
Security
• Lock Phone Use
• Limit Calls Out
• Change Lock Code
• Erase All Contacts
• Erase Recent Calls
• Phone Reset
• Call Ring/Vibe
• Ringer Volume
• Ringer Type
• Roam Ringer
• Key Beep Volume
• Earpiece Volume
• Key Beep Length
• Missed Call Alert
• Smart Sound (see page 6.)
• Key Beep Sound
Call Information
• Recent Calls Timer
• All Calls Timer
• Browser Timer
16
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Network
• Digital or Analog
1. Select Menu 3Settings 3Silence All.
2. Select an option (Normal turns on the
• Roam Option
• Roam/Srvc Alert
• Privacy Alert
ringer.)
Silence All mode.
3. Press to save your selection.
indicates the phone is in
• Data/Fax Calls In
Extras
Keyguard
The Keyguard locks your keypad to
protect your phone against accidental
keypresses when the phone is turned on
and a call is not in progress. Keyguard
does not prevent you from answering or
silencing an incoming call.
• 1-Touch Dialing
• Browser Prompt
Messaging
• Voicemail Number
• Auto-Erase Text
• Voicemail Alert
• Page Alert
• Message Alert
• Net Alert
To turn keyguard on
1. Select Menu 3Settings 3Keyguard.
2. Highlight one of the locking options
Accessories
and press
to save:
• Power Backlighting
• Headset Ringing
• Car Auto-Answer
• Guard Now—Lock the keypad
immediately.
• 30s auto-guard—Lock the keypad if
no key is pressed for 30 seconds.
• 1m auto-guard—Lock the keypad if
no key is pressed for one minute.
• 5m auto-guard—Lock the keypad if
no key is pressed for five minutes.
Silence All
You can silence all phone sounds,
including the ringer and all alerts, while
leaving the phone on. You can replace
the sounds by setting the phone to
vibrate or light up and flash.
User’s Guide for the QCP 2035 Phone
17
Download from Www.Somanuals.com. All Manuals Search And Download.
• Auto-guard off—Unlock the keypad
and returns it to normal.
Shortcut—To turn keyguard on from the
– 10 seconds—Backlighting is on for
10 seconds after a keypress.
– 30 seconds—Backlighting is on for
30 seconds after a keypress.
– 10 sec. & in call—Backlighting is on
for 10 seconds after a keypress, and
during a call.
– 30 sec. & in call—Backlighting is on
for 30 seconds after a keypress, and
during a call.
home screen, press up and hold
.
To turn keyguard off
•
Press
3
3
.
Sounds
You may change the alert sounds your
phone makes.
•
Select Menu 3Settings 3Sounds, then
the setting you want. For a list of
options, see page 16. For information
about automatic volume adjustment
(Smart Sound), see “To adjust the
volume” on page 6.
•
To change the appearance of the
menus you see when you select Menu
from the home screen, select Main
Menu View, then the option you want:
– Small Icons
– Large Icons
– List Menus
Display
Security
To change the appearance of your
phone’s screen, select Menu 3
You must enter your four-digit lock code
(typically 0000 or the last 4 digits of your
phone number) to set any of the options
on the Security menu.
Settings 3Display, then the option you
want (see page 16 for a list of options).
•
To optimize your battery’s
performance, select Backlighting, then
To lock and unlock the phone
When you lock your phone, you can only
call a number your service provider has
press
to select an option:
– Disabled—Backlighting is not used.
18
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
set up as an emergency number, a service
provider number, or a priority number.
You can still receive incoming calls.
• Select Yes and enter a new code,
then press . Enter your new
lock code again to verify it.
• Select Exit to leave your lock code
unchanged.
To lock the phone
1. Select Menu 3Settings 3Security 3
Lock Phone Use.
To erase all contacts
2. Select an option:
•
Select Menu 3Settings 3Security 3
• Never—Do not lock the phone.
• On power up—Lock the phone every
time you turn it on.
Erase All Contacts.
– Select No to leave contacts
unchanged.
• Now—Lock the phone immediately.
– Select Yes to erase all contacts. A
message appears: “Erase ALL
contacts?” Select No to cancel or
Yes to erase all contacts.
3. Press
.
To unlock the phone
•
Select Unlock and enter your four-digit
lock code.
To erase recent calls
•
Select Menu 3Settings 3Security 3
Erase Recent Calls.
– Select No to leave the Recent Calls
list unchanged.
– Select Yes to erase all recent calls. A
message appears: “Erase ALL recent
calls list entries?” Select No to
cancel or Yes to erase all recent
calls.
To limit calls out
•
Select Menu 3Settings 3Security 3
Limit Calls Out. Select No for unlimited
calls, or select Yes, to Contacts to allow
calls to contacts only.
To change your lock code
1. Select Menu 3Settings 3Security 3
Change Lock Code.
2. A message appears: “Change Lock
Code?”
User’s Guide for the QCP 2035 Phone
19
Download from Www.Somanuals.com. All Manuals Search And Download.
To reset the phone
Browser Timer
This timer displays the total duration of
•
Select Menu 3Settings 3Security 3
Phone Reset.
data calls you have made. Press
to
– Select No to cancel.
select Reset and reset the timer to zero.
– Select Yes to reset the phone. A
message appears: “Reset ALL
phone settings?” Select No to
cancel or Yes to reset the phone.
Network
Use this setting to view or change options
such as roaming and privacy alerts. Some
settings may not be available on all
phones.
Note—Your four-digit lock code, Recent
Calls list, Contacts directory, InBox and
OutBox contents, memos, and service
programming are not reset when you
reset your phone.
To select digital or analog mode
1. Select Menu 3Settings 3Network 3
Digital or Analog.
2. Press
to select an option:
Call Information
This setting allows you to view
information about calls and alerts.
• Automatic—Automatically switch
the phone between digital and
analog.
• Analog only—Set the phone to work
in analog mode only.
Recent Calls Timer
This timer displays the total number and
duration of recent calls you have made
• Analog call—Force a call into analog
mode for the duration of the next
call.
and received. Press
to select Reset.
This resets the timer to zero.
• Digital only—Set the phone to work
in digital mode only.
All Calls Timer
This timer displays the total number and
duration of all calls you have made and
received. You cannot reset this timer.
20
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
When service is acquired again,
you will hear three tones in
increasing intensity.
Roam Option
This setting determines which signals
your phone will accept.
1. Select Menu 3Settings 3Network 3
Roam Option.
• On roam change—You are alerted
with two tones, decreasing in
intensity, when roaming service is
acquired. When home area service
is acquired again, you will hear two
tones, increasing in intensity.
• On any change—You are alerted with
three increasing tones if there is a
change in roaming service or three
decreasing tones if the phone loses
service.
2. Press
to select an option:
• Automatic (recommended setting)—
Accept any system the phone
service provides.
• No Roaming—You cannot make or
receive calls outside of your home
service area.
Roam/Service Alert
Use this setting to have the phone alert
you if you roam outside of your home
service area.
Privacy Alert
1. Select Menu 3Settings 3Network 3
1. Select Menu 3Settings 3Network 3
Roam/Srvc Alert.
Privacy Alert.
2. Press
to select an option:
2. Press
to select an option:
• Disabled—Do not play any alerts.
• Enabled—Play an audible alert
whenever enhanced privacy is lost
or regained and a call is in progress.
Note—An alert message always shows on
the screen, regardless of these settings.
• Disabled—You are not alerted if you
roam outside your home service
area.
• When no service—You are alerted
with three tones, decreasing in
intensity, when service is lost.
User’s Guide for the QCP 2035 Phone
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Data/Fax Calls In
Browser Prompt
These settings tell the phone how to
handle voice and data calls.
1. Select Menu 3Settings 3
Network 3Data/Fax Calls In.
You may receive a prompt whenever you
attempt to start or exit the browser.
1. Select Menu 3Settings 3 Extras 3
Browser Prompt.
2. Press
to select an option:
2. Press
to select an option:
• Voice Only—Allow only voice calls.
• Fax, next call—Set the phone to fax
mode for the next incoming call or
the next ten minutes.
• At Start—Prompt you when you
start the browser.
• At End—Prompt you when you exit
the browser.
• Data, next call—Set the phone to
data mode for the next incoming
call or the next ten minutes.
• Fax, until off—Force the phone into
fax mode until the phone is turned
off.
• Data, until off—Force the phone into
data mode until the phone is
turned off.
• Both—Prompt you when you start
the browser and exit the browser.
• No Prompts—You do not receive any
prompts.
Messaging
The messaging settings allow you to set
how you want to handle incoming and
outgoing messages.
To change your voicemail number
You can change the phone number
assigned to speed dialing location “1” by
doing the following:
Extras
These settings allow you to program
various options.
1. Select Menu 3Messages 3Msg
Settings 3Voicemail Number.
1-Touch Dialing
See “To use 1-Touch Dialing” on page 12.
22
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select Edit to change the number that
is currently assigned to speed dial
location “1.”
3. Enter the new number, then select an
option:
Alerts
You can choose how you want to receive
alerts for voicemail, pages, text messages,
and the Web Browser.
1. Select Menu 3Settings 3Messaging,
then the type of alert (Voicemail Alert,
Page Alert, Message Alert, or Net Alert).
• Save—Saves the new number.
• Time Pause—Enters a time pause in
the number. See “To enter pauses”
on page 15.
• Hard Pause—Enters a hard pause in
the number. See “To enter pauses”
on page 15.
2. Press
to select an option:
• Disabled—You are not alerted when
a message is received.
• Vibrate once—The phone vibrates
once when a new message is
received.
• Vibe & remind—The phone vibrates
once when a new message is first
received, and a reminder vibrates
every five minutes until the
message is acknowledged by
To erase messages automatically
Use this setting when your phone is low
on memory and you want to receive new
messages. (This setting does not affect
voicemail notifications.)
1. Select Menu 3Settings 3 Messaging 3
Auto-Erase Text.
pressing
or
, or selecting
Ignore from the bottom of the
screen.
Note—If a message is received while
you are on a call, the phone does not
vibrate to remind you.
2. Press
to select an option:
• Disabled—Messages are not erased.
• Old InBox—Old, read messages are
automatically erased.
User’s Guide for the QCP 2035 Phone
23
Download from Www.Somanuals.com. All Manuals Search And Download.
• Low beep once—The phone beeps
once at a low volume when a
message is received.
• Low beeps—The phone beeps every
five minutes at a low volume until
the message is acknowledged by
1. Select Menu 3Settings 3
Accessories 3 Power Backlighting.
2. Select Normal to keep the default
setting, or Always on to keep
backlighting on.
Note—Setting backlighting to Always on
may drain the battery more quickly.
pressing
or
, or selecting
Ignore from the bottom of the
screen.
• Loud beep once—The phone beeps
once at a high volume when a
message is received.
• Loud beeps—The phone beeps at a
high volume every five minutes
until the message is acknowledged
Headset Ringing
When a headset is attached to the phone,
you may choose to have alert sounds
come out of either the phone or the
headset.
1. Select Menu 3Settings 3Accessories
3 Headset Ringing.
2. Select Out of phone to have the alerts
come out of the phone, or Out of
headset to have alerts come out of the
headset.
by pressing
or
, or
selecting Ignore from the bottom of
the screen.
Accessories
Your phone comes with several features
for additional convenience.
Car Auto-Answer
If your phone is attached to a portable
Hands-free Car Kit (sold separately), you
may set it to answer an incoming call
after 5 seconds.
Power Backlighting
This allows backlighting to remain on
when external power, such as a travel
charger, is used with the phone.
•
Select Menu 3Settings 3Accessories
3Car Auto-Answer 3After 5 seconds.
24
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5
TOOLS
The Tools menu offers a variety of helpful
items.
3. Select the amount you want to
include as a tip (15%, 18%, 20%, 10%, 5%,
Other) and press
4. Your total bill, including tip, is
calculated and displayed.
5. To split the bill, press
.
Alarm Clock
Use the Alarm Clock to set an alert for a
specific time. The alert occurs only if the
phone is on.
1. Select Menu 3Tools 3Alarm Clock
3Set.
right and
press
to select Split.
6. Enter the number of guests and press
. The amount for each guest
appears.
• Press
up or down to select an
hour and minutes.
Calculator
• Press
left or right to switch
between hours, minutes, and a.m./
p.m.
Use the calculator for basic mathematical
equations.
2. Press
to save.
1. Select Menu 3Tools 3Calculator.
2. Use the keypad to enter numbers.
3. When the alarm rings, select Snooze to
silence the alarm for 10 minutes, or
select Off to turn off the alarm.
3. Press
to select mathematical
operations.
Tip Calculator
1. Select Menu 3Tools 3Tip Calculator.
2. Enter the amount of your bill and
=
³
Perform s the “equals” function.
Inserts the division character after the
last num ber entered.
press
.
-
Inserts the subtraction character after the
last num ber entered.
User’s Guide for the QCP 2035 Phone
25
Download from Www.Somanuals.com. All Manuals Search And Download.
volume set for alerts, when that amount
of time has elapsed.
1. Select Menu 3Tools 3Countdown
Timer.
+
X
.
Inserts the addition character after the
last num ber entered.
Inserts the m ultiplication character after
the last num ber entered.
2. Press
to Set.
Inserts the decim al point after the last
num ber entered.
3. Press
up or down to set the
hours, minutes, and seconds. To move
the cursor, press left or right.
C
Clears all num bers entered and displays
a zero.
4. Select Start to begin the countdown.
MR Displays the value currently stored in
m em ory.
Select Stop to pause the countdown.
5. When the alarm rings, press
to
M+
Adds the displayed digit to the value
stored in m em ory.
silence it.
MC Clears the value currently stored in
m em ory.
Stopwatch
1. Select Menu 3Tools 3Stopwatch.
2. Select Start to have the stopwatch
begin counting.
±
Changes the sign of the displayed
num ber.
Clears one function or one digit from the
screen and returns the calculator to digit
entry m ode. Hold down to clear all of the
digits and operations and display a zero.
3. Select Stop to quit counting.
4. Select Reset to set the counter back to
zero and have the stopwatch begin
counting again.
Exits the calculator and returns to the
hom e screen.
5. Press
when finished.
Countdown Timer
This timer counts down for a specified
amount of time. It beeps, using the
26
Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
Brick Attack™
1. Select Menu 3Tools 3Brick Attack.
2. To start the game, press
New.
to select
3. To pause the game, press
, then
press
to Resume.
The goal of this game is to eliminate
bricks arranged in levels. To do this, you
send a moving ball upward using a paddle
at the bottom of the screen. To move the
paddle, press
left or right. If an
incoming call alert is received, the game
is paused and exited. You can return to
play once the incoming call alert is
ended.
User’s Guide for the QCP 2035 Phone
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6
MESSAGES
You can receive, send, and erase
messages. Check with your service
provider for features available in your
area.
To check voicemail
You can check your voicemail in any of
the following ways.
Note—A voicemail number may have
been pre-programmed into your phone.
Check with your service provider.
•
New, unread messages are stored in
your Text InBox and are bold.
Once you have read a message, you
can save it to your Filed folder, erase it,
or leave it in your Text InBox.
Once you have sent or scheduled a
message, it is stored in your Text
OutBox.
•
•
When you receive an alert, press
to select Voice.
-or-
•
•
•
Press and hold
to call your
voicemail number.
-or-
All of the following procedures start at
the home screen unless otherwise
indicated.
•
Press
-or-
3
.
Select Menu 3Messages 3Voicemail,
and press
Retrieving messages
.
When a text message, page, or voicemail
To view text messages
You can view text messages in any of the
is received,
appears on your phone
screen. To retrieve voice messages, see
“To check voicemail” below. To retrieve
text messages, see “To view text
messages” on page 28.
following ways.
When you receive an alert, press
to select Text.
-or-
28
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Select Menu 3Messages 3Text InBox.
2. Press up or down to scroll
through the list of messages.
–
Done—Return to the Text InBox.
5. Press
to see information such as
callback number, email address, or
URL. (If a callback number is included
with the message, press
call the number.)
3. Press
to read a message.
indicates an “Urgent” message.
4. Read the message and select an option
from the bottom of the screen:
• Reply—Reply to the sender, if their
address is available.
again to
Sending messages
•
•
•
To learn how to enter text, see
“Entering letters, numbers, and
symbols” on page 13.
Scheduled, pending, and sent
messages are stored in your Text
OutBox.
If you are sending a message to more
than one person, enter a space or a
comma between each phone number
or email address. If you are sending to
more than one contact, the phone
will automatically insert a comma
between each contact name. The
messages will be sent one at a time.
Note—Usage charges may apply to
each message; check with your
service provider.
• Erase—Erase the current message.
• Save—Save the message to your
Filed folder.
• Sender—View the sender’s
information. You can select an
option to save it to the Contacts
directory:
–
–
–
OK—Returns to the message
screen.
Save New—Save the sender’s
information as a new contact.
Add to—Add the sender’s
information to an existing
contact.
–
Forward—Forward message to
the sender, if their address is
available.
User’s Guide for the QCP 2035 Phone
29
Download from Www.Somanuals.com. All Manuals Search And Download.
message at a scheduled time” on
page 31.
• Save Message—Save the message in
your Filed folder.
To send a new message
1. Select Menu 3Messages 3Send New.
2. Enter the phone number or email
address of the person to whom you
are sending the message, or select
Contacts to select a phone number or
email address from a contact.
• Exit—Exit without saving.
Note—If you have selected an option
such as Callback Number or Priority, you
are returned to the Options screen.
Select another option such as Send
Message to send the message.
3. Press
to select Next.
4. Enter your message and press
to
select Next.
5. Press
up or down and press
to select an option:
To send a preformatted message
1. Select Menu 3Messages 3 Send
Preformat.
2. Select from a list of preformatted
messages, such as Call me, I’m delayed,
or Need directions.
3. Enter the phone number or email
address of the person to whom you
are sending the message, or select
Contacts to select a phone number or
email address from a contact.
• Send Message—Send the message
immediately and save it in your Text
OutBox.
• Callback Number—Add a callback
number to the message. See “To
add a callback number to a
message” on page 31.
• Delivery Receipt—Send a notification
to your phone when the recipient
receives the message.
• Priority—Mark the message Normal
or Urgent.
4. Press
to select Next.
5. Press
to select Next again, or
select an option.
• Send Later—Schedule delivery of
this message. See “To send a
30
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press
up or down and press
to select an option (see page 30
Message delivery options
To add a callback number to a message
After creating a message and selecting the
Callback Number option, do one of the
following.
for options).
To send a saved message
1. Select Menu 3Messages 3Filed.
2. Press
up or down through the
To send your own phone number:
list of messages.
•
Press
options at the bottom of the screen.
To send a specific phone number:
a. Press , then press right to
to select Yes from the
3. Press
to select a message.
4. Select an option from the bottom of
the screen (Resend, Send To, Erase, or
Done).
5. Enter the phone number or email
address of the person to whom you
are sending the message, or select
Contact to select a phone number or
email address from a contact.
select Other from the options at the
bottom of the screen.
b. Enter the phone number.
c. Press
the text entry mode, see page 13.
If you do not want to send a callback
number:
to select Done. To change
6. Press
to select Next.
7. Press
to select Next again, or
•
Press
right, then press
to
select an option from the bottom of
the screen.
select No from the options at the
bottom of the screen.
8. Press
up or down and press
to select an option (see page 30
To send a message at a scheduled time
After creating a new or preformatted
message (page 30), you can select when
to send it. Once the Send Later option is
selected, complete this step:
for options).
User’s Guide for the QCP 2035 Phone
31
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Select from a list of options for when
to send the message (30 minutes, 1 hour,
2 hours, 12 hours, 1 day, 2 days, or 3 days).
The message is scheduled for delivery
and stored in your Text OutBox.
To erase messages one at a time
1. Select Menu 3Messages.
2. Press
down and press
to
select the type of message you want
to erase (Voicemail, Text InBox, or Filed).
Note—You can erase a scheduled message
from the Text OutBox, but you cannot
cancel delivery of the message.
3. Press
to select the message you
want to erase.
4. Select Erase to erase the message. A
message appears: “Erase this
message?”
5. Select Yes to erase the message, or No
to cancel.
Note—You can erase a scheduled message
from the Text OutBox, but you cannot
cancel delivery of the message.
Erasing messages
1. Select Menu 3Messages 3Erase Msgs.
2. Press
up or down and press
to select an option:
• No—Cancel and return to the
Messages screen.
• Entire InBox—Erase all messages in
your Text InBox.
Troubleshooting messages
• Old InBox—Erase read messages in
your Text InBox.
• Entire OutBox—Erase all messages in
your Text OutBox.
Low memory
If your phone is low on memory or is out
of memory, you may not be able to
receive new messages. An alert appears
every time memory is more than 75% full:
“WARNING! Memory is nearly full!” If
you see this alert, do the following:
3. A message appears: “Erase ALL?”
Select Yes to erase messages or No to
cancel.
Tip—To learn how to erase messages
automatically, see page 23.
1. Press
to select OK.
32
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Erase contacts or text messages to free
up more memory. See “To erase
information from a contact card” on
page 10 or “Erasing messages” on
page 32.
If you cannot send messages
A message delivery attempt may fail if
there is no service or the message is
rejected by the network. Your phone will
try to send the message again later. If a
message cannot be delivered, an alert
appears. Press
to select OK.
User’s Guide for the QCP 2035 Phone
33
Download from Www.Somanuals.com. All Manuals Search And Download.
7
WEB BROWSER
You can use your phone to browse the
Internet if you have obtained phone
Internet services from your service
provider and if over-the-air Internet
access is available in your area.
Web Browser options
The following options may appear on
your screen:
•
•
•
•
Home—Return to the main Web
Browser window, or home page.
Mark Site—Save the current location
as a bookmark for easy access.
Bookmarks—Display a list of your
saved web sites.
Using the Web Browser
To learn how to enter text in the Web
Browser, see “Entering letters, numbers,
and symbols” on page 13.
Note—You cannot receive incoming calls
while you are in the Web Browser and a
data call is in progress.
Setup
– Show URL—Display the entire URL.
– Phone.com™—Display information
about your Web Browser version.
– Encryption—Do not use unless you
are instructed to do so by your
service provider.
To start the Web Browser
•
From the home screen, select
Menu 3Web Browser.
– Set UP.Link—Select a different
browser server. You can use this
option if you have more than one
Web Browser account, such as one
for business use and one for
personal use.
To exit the Web Browser
•
Press
.
-or-
Press
from the Web Browser
home screen.
– Restart—Restart the Web Browser.
34
Web Browser
Download from Www.Somanuals.com. All Manuals Search And Download.
Net Alerts
Indicators and alerts
Web Browser screen
If your service provider has activated
Internet services on your phone and you
are in an area that provides over-the-air
Internet access, you may receive Net
Alerts. These short messages allow you to
quickly access information on the
Internet.
•
The
appears in a secure Web
Browser session.
Links are identified with an underline
and an arrow:
•
Your weekend weather
will be warm and sunny,
with highs in the 70s ...
User’s Guide for the QCP 2035 Phone
35
Download from Www.Somanuals.com. All Manuals Search And Download.
8
TROUBLESHOOTING
What is my lock code?
How do I erase recent calls?
The default lock code is usually either
0000 or the last four digits of your phone
number. If you forget your lock code, call
your service provider.
See “To erase recent calls” on page 19.
What do the icons on the top of the screen
mean?
See page 3 for screen icon descriptions.
How do I lock and unlock the phone?
See “Security” on page 18.
My phone displayed the message “Reading
Info. Please wait ...” when I turned it on.
What does this mean?
Your phone is performing routine
maintenance. This normally takes a few
minutes.
How do I turn my ringer on?
Select Menu 3Settings 3Silence All 3
Normal.
How do I change the ringer volume or
ringer type?
See “Sounds” on page 18.
My phone is out of memory. What do I do?
Erase old messages or contacts. See “To
erase messages automatically” on page 23
and “To erase information from a contact
card” on page 10.
How do I store phone numbers?
See “To save a phone number” on page 9.
How do I change my banner?
How do I get accessories for my phone?
To shop for phone accessories, visit
www.kyocera-wireless.com/store, or call
(800) 211-1537 (U.S.A. only) or
(510) 683-4004.
Select Menu 3Settings 3Display 3My
Banner. Enter your text and press
.
How do I speed dial?
Enter the one- or two-digit speed dial
number and press
.
36
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
How do I become a product evaluator?
To participate in the testing and
•
Phone: (800) 349-4478 (U.S.A. and
Canada only) or (858) 882-1400.
evaluation of Kyocera Wireless Corp.
products, including cellular or PCS
phones, visit beta.kyocera-wireless.com.
Before requesting support, please try to
reproduce and isolate the problem.
When you contact the Customer Care
Center, be ready to provide the following
information:
Where to find help
Your service provider’s customer support
department may be accessible directly
from your phone when you dial a number
(check with your service provider). They
can answer questions about your phone,
phone bill, call coverage area, and
specific features available to you, such as
call forwarding or voice mail.
For questions about the phone features,
refer to the materials provided with your
phone. Visit www.kyocera-wireless.com
for the most current materials.
•
•
The name of your service provider.
The actual error message or problem
you are experiencing.
•
•
The steps you took to reproduce the
problem.
The phone’s electronic serial number
(ESN). To find the ESN, remove the
battery as follows:
a. Hold the phone face down with the
antenna pointing down.
b. Place your thumb on the ridges of
the battery door, then push down
with your thumb and slide the
battery door away from you until it
stops (about 1/2 inch or 1.27
centimeters).
c. Move your thumb to the side of the
phone, then slide the battery door
off of the phone.
For additional questions, you may contact
the Kyocera Wireless Corp. Customer
Care Center as follows:
•
•
Web site: www.kyocera-wireless.com
Email: phone-help@kyocera-
wireless.com
User’s Guide for the QCP 2035 Phone
37
Download from Www.Somanuals.com. All Manuals Search And Download.
d. Tilt the phone to remove the
battery. The ESN is visible after the
battery is removed. It should start
with “179-” or “B3-.”
e
Replace the battery as follows:
d
a. Extend the antenna.
b. Place the battery into the phone
with the metal contacts facing
down and towards the bottom of
the phone.
c
c. Lay the keypad flat inside the
faceplate.
d. Align the slots in the phone to the
posts on the faceplate.
e. Close until latched together.
f. Align the battery door to the
grooves on either side of the
phone.
g. Slide the battery door on while
pressing down firmly, ensuring that
the battery door clicks into place.
Check and repeat if the battery
door is not aligned. Do not force.
38
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Numerics
1-Touch Dialing, 11
A
Alarm Clock, 25
alerts, 23, 35
analog mode, 20
answering calls, 5
B
Spanish, 14
Clear key, 2
contact
calling, 11
editing, 10
erasing, 10
saving a phone number as, 10
searching for, 10
backlighting, 16
power, 17, 24
battery
care and safety, 7
performance, 8
removing, 37
replacing, 37
C
Contacts directory
calling from, 11
searching, 10
Countdown Timer, 26
D
data/fax setup, 22
dialing
1-Touch, 11
from Recent Calls list, 13
speed, 12
calls
answering, 5
ending, 5
making, 5
digital mode, 20
E
muting, 6
End/Power key, 2
ending calls, 5
F
unmuting, 6
characters
French, 14
faceplate
39
Download from Www.Somanuals.com. All Manuals Search And Download.
removing, 38
replacing, 38
French characters, 14
H
hanging up, 5
hard pause, 15
I
erasing, 32
automatically, 23
new, 28
preformatted, 30
scheduled, 28, 31
sent, 28
troubleshooting, 32
icons, 3
mode
InBox, Text, 28
Internet browser, 34
K
analog, 20
digital, 20
mute, 6
Keyguard, 17
N
keypad
navigator key, 2
Net Alerts, 35
O
locking, 6, 17
unlocking, 6, 18
L
OutBox,Text, 28
languages, 14
P
letters
pauses
entering, 13
special characters, 14
locking
hard, 15, 23
timed, 15, 23
phone
keypad, 6, 17
phone, 18
phone numbers, 9
M
locking, 18
unlocking, 18
phone number
finding your own, 5
making calls, 5
locking, 9
messages
making secret, 9
40
Download from Www.Somanuals.com. All Manuals Search And Download.
power-save mode, 7
R
T
text
Recent Calls list
description of, 12
dialing from, 13
viewing, 12
redial last number called, 12
resetting the phone, v
roaming, 21
entering, 13
entry modes, 13
Text InBox, 28
Text OutBox, 28
timed pause, 15
U
unlocking
keypad, 18
phone, 18
unmute, 6
V
S
safety, v
saving a phone number, 9
screen icons, 3
secret phone numbers, 9
Select key, 2
voicemail
calling, 12
Shift key, 2
silence
changing number, 22
volume
adjusting automatically (see also
all sounds, 17
ringer, 5
Smart Sound), 6
Silence All mode, 17
Smart Sound (see also volume, adjusting
automatically), 6
Sounds, 18
adjusting manually, 6
W
Web Browser, 34
Space key, 2
special characters, 14
speed dialing, 12
41
Download from Www.Somanuals.com. All Manuals Search And Download.
|