Download from Www.Somanuals.com. All Manuals Search And Download.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the network.
In general, the closer you are to a wireless base
station antenna, the lower the power output.
Optimize your phone’s performance
Use the guidelines on page 2 to learn how to
optimize the performance and life of your phone
and battery.
Air bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over the
air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
While there may be differences between the SAR
levels of various phones and at various positions,
they all meet the government requirement for
safe exposure.
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
http://www.fcc.gov/oet/fccid after searching on the
FCC ID: OVFKWC-KX16.
If you have any reason to suspect that
interference is taking place, turn off your phone
immediately.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to discuss
alternatives.
* In the United States and Canada, the SAR limit
for mobile phones used by the public is
1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial
margin of safety to give additional protection for the
public and to account for any variations in
measurements.
Other medical devices—If you use any other personal
medical device, consult the manufacturer of the
device to determine if it is adequately shielded
from external RF energy. Your physician may be
able to help you obtain this information.
Caution
In health care facilities—Turn your phone off in health
care facilities when instructed. Hospitals and
health care facilities may be using equipment that
is sensitive to external RF energy.
The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the warranty
and user’s authority to operate the equipment.
User Guide for the Kyocera Candid KX16 Phone
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Potentially unsafe areas
Posted facilities—Turn your phone off in any facility
when posted notices require you to do so.
Resetting the phone
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
Aircraft—FCC regulations prohibit using your phone
on a plane that is in the air. Turn your phone off or
switch it to Airplane Mode before boarding aircraft.
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
Vehicles—RF signals may affect improperly installed
or inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer of the
device to determine if it is adequately shielded
from external RF energy. Your physician may be
able to help you obtain this information.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Blasting areas—Turn off your phone where blasting
is in progress. Observe restrictions, and follow any
regulations or rules.
To shop online for phone accessories, visit
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
To order by phone, call (800) 349-4188
(U.S.A. only) or (858) 882-1410.
Radio Frequency (RF) energy
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include:
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
•
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or chemicals
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless
phones. These guidelines are consistent with the
safety standards previously set by both U.S. and
international standards bodies in the following
reports:
vehicles using liquefied petroleum gas, such as
propane or butane
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
any other area where you would normally be
advised to turn off your vehicle engine
•
•
•
ANSI C95.1 (American National Standards
Institute, 1992)
Use with care
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on the phone.
•
NCRP Report 86 (National Council on
Radiation Protection and Measurements,
1986)
Keep phone dry
If the phone gets wet, turn the power off
immediately and contact your dealer. Water
damage may not be covered under warranty.
•
ICNIRP (International Commission on Non-
Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by
these reports and the FCC guidelines.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
Battery and charger specifications
Charger
Input
Output
TXACA10004
TXTVL10063
120 VAC, 60 Hz, 7 W 5.2VDC, 400 mA
100 - 240 VAC,
50 / 60 Hz, 200 mA
4.2VDC, 600 mA
Standard Battery
3.7V, 900 mAh
Extended Battery
3.7V, 1800 mAh
093 453 037
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121
U.S.A.
Visit us at www.kyocera-wireless.com
To purchase accessories, visit
User Guide for the Kyocera Candid KX16 Phone
v
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1
Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1
Getting to know your phone . . . . . . . . . . . . . . . . 3
8
Customizing Your Phone . . . . . . . . . . . . 33
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . 34
Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . 34
Setting sounds for your phone . . . . . . . . . . . . . 35
Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . 35
Setting message alerts. . . . . . . . . . . . . . . . . . . . 36
Using shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . 36
Personalizing the screen. . . . . . . . . . . . . . . . . . 37
Creating a secure environment . . . . . . . . . . . . . 39
Network settings . . . . . . . . . . . . . . . . . . . . . . . . 40
Data Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Setting position location . . . . . . . . . . . . . . . . . . 42
2
Making and Answering Calls . . . . . . . . . . 8
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the speakerphone . . . . . . . . . . . . . . . . . . . 9
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 11
Silencing an incoming call . . . . . . . . . . . . . . . . 12
Calling emergency services . . . . . . . . . . . . . . . . 12
Setting roaming alerts and ringers . . . . . . . . . . 13
Controlling network roaming . . . . . . . . . . . . . . 14
9
Using Media Gallery . . . . . . . . . . . . . . . . 43
Accessing files . . . . . . . . . . . . . . . . . . . . . . . . . 43
Creating free space . . . . . . . . . . . . . . . . . . . . . . 44
3
4
Storing Contacts . . . . . . . . . . . . . . . . . . . 15
Creating a new contact . . . . . . . . . . . . . . . . . . . 15
Editing or erasing a contact. . . . . . . . . . . . . . . . 15
Editing a phone number . . . . . . . . . . . . . . . . . . 16
Finding contact information . . . . . . . . . . . . . . . 16
10 Tools & Games. . . . . . . . . . . . . . . . . . . . . 45
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Tip Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . 46
Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Brick Attack . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Race 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using the Camera . . . . . . . . . . . . . . . . . . 18
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 20
Camera key map . . . . . . . . . . . . . . . . . . . . . . . . 20
5
6
Entering Text, Numbers,
and Symbols . . . . . . . . . . . . . . . . . . . . . . 21
Sending and Receiving
Text Messages . . . . . . . . . . . . . . . . . . . . . 24
Sending text messages. . . . . . . . . . . . . . . . . . . . 24
Retrieving text messages . . . . . . . . . . . . . . . . . . 26
Customizing message settings . . . . . . . . . . . . . . 28
11 Connecting to the Internet . . . . . . . . . . . 51
Using the Web Browser. . . . . . . . . . . . . . . . . . . 51
7
Using Voice Recognition . . . . . . . . . . . . 30
Setting up voice dialing . . . . . . . . . . . . . . . . . . . 30
Calling using voice tags . . . . . . . . . . . . . . . . . . . 30
Calling using digit dialing . . . . . . . . . . . . . . . . . 31
Training voice recognition . . . . . . . . . . . . . . . . 32
12 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 53
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
vi
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1
GETTING STARTED
Installing the battery
Your phone comes with a removable lithium ion
(LiIon) battery.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls. Fully charge the
battery before using the phone.
To install the battery:
To charge the battery,
connect the AC
1. Hold the phone with the back facing you.
2. Toward the bottom of
the phone there is a
recess to aid you in
opening the battery
door. Use your finger to
pull the battery door
away.
adapter to the jack
on the bottom of the
phone, then plug the
adapter into a wall
outlet.
3. Place the battery in the
phone casing with the
metal contacts toward
the bottom of the phone.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
•
•
•
Charging (the icon is animated)
Partially charged
4. Place the battery door
tab in the opening near
the top of the phone.
Fully charged
Recharging the battery
5. Press the battery door
until it clicks into
place.
You can safely recharge the battery at any time,
even if it has a partial charge.
User Guide for the Kyocera Candid KX16 Phone
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the battery
General safety guidelines
•
•
•
Do not take apart, puncture, or short-circuit
the battery.
If you have not used the battery for more than
a month, recharge it before using your phone.
Avoid exposing the battery to extreme
temperatures, direct sunlight, or high
humidity.
•
Never dispose of any battery in or near a fire –
it could explode.
Common causes of battery drain
•
•
•
•
Playing games or using the Web.
Keeping backlighting on.
Taking and viewing pictures.
Operating in analog ( ) mode. Your phone
switches between modes to find the best
signal. To set your phone to operate in a single
mode, select Menu → Settings →
Network → Digital/Analog.
•
Operating in digital mode when far away from
a base station or cell site.
•
•
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
•
•
High earpiece and ringer volume settings.
Repeating sound, vibration or lighted alerts.
2
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to know your phone
Home screen.
1
2
3
4
5
6
7
8
Left softkey accesses menus and functions.
Send/Talk key starts or answers calls.
Speakerphone key activates the speakerphone.
Keypad for entering numbers, letters, or symbols.
* Shift key changes the text mode in text entry.
Jacks for AC adapter (included)*.
Navigation key positions cursor during text entry. Scrolls through
list.
OK key selects a menu item or option.
9
Right softkey to access Contacts and other menu options.
End/Power key turns the phone on and off. Ends a call.
10
11
12
Back key erases characters in text entry. Returns to previous
screen. Activates the flashlight when pressed and held.
# Space key enters a space during text entry. Activates Silent mode.
13
14
0 Next key cycles through word choices during text entry.
User Guide for the Kyocera Candid KX16 Phone
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna (does not extend).
Volume key to raise or lower speaker volume.
Camera key.
15
16
17
18
19
20
21
Camera lens.
Mirror when taking your own picture.
Camera flash and flashlight.
External screen displays time, caller ID, signal and
battery strength.
Jack for hands-free headset and data cable (sold separately)*.
22
*Warning: Inserting an accessory into the incorrect jack will damage
the phone.
4
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Menus
The contents of the main menu are as follows:
Recent Calls
All Calls
Incoming Calls
Outgoing Calls
Missed Calls
Erase Call Lists
All Calls Timer
Home Calls Timer
Roam Calls Timer
Contacts
View All
Add New
Find Name
Speed Dial List
Voice Dial List
Messaging Groups
Camera
Tools & Games Web Browser
Brick Attack®
Race 21TM
Contacts cont.
Business List
Personal List
Information
Messages
New Text Msg
New Pix Msg*
Voicemail
InBox
Browser Alerts*
Sent
OutBox*
Saved
Drafts
Msg Settings
Group Lists*
Erase Messages
Connects to Internet
Phone Info
Launches the
Camera
Media Gallery
DoodlerTM
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Phone number
Camera Pictures
Software Version
PRL Version
Factory Config
ESN
Technology
SID
Images
Sounds
Settings
Silent Mode
Sounds
Display
Stopwatch
World Clock
Flashlight
Icon Key
Convenience
Voice Features
Messaging
Security
Network
Accessories
BREW Apps
Launches BREW
*Not available on all phones, check with your service provider.
•
•
•
Press
Press
Press
to select Menu.
In this guide, an arrow → tells you to select an
option from a menu. For example, Menu →
Settings means select Menu, then select the
Settings option.
to select Contacts.
left, right, up, or down to view
menus and options*.
* To change the way the menus appear, select
Menu →Settings→Display→MainMenuView,
then select Graphic, List, or Wheel and press
. See “Choosing a menu view” on page 37 for
details.
•
•
•
Press
Press
Press
to select a menu item.
to back up a menu level.
to return to the home screen.
User Guide for the Kyocera Candid KX16 Phone
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing basic functions
To...
From the home screen...
Turn the phone on
Turn the phone off
Make a call
Press
Press and hold
Enter the number, and press
and wait until the phone chimes.
until the phone beeps.
.
End a call
Press
Press
.
Answer a call
.
Access voicemail
Verify your phone number
Press and hold
and follow the system prompts.
Select Menu → Phone Info.
Silence the ringer on an
incoming call
Press , then
-or-
to answer.
Press
up or down, then
to answer.
Activate voice dialing
Launch the browser
Record a voice memo
Access recent calls list
Launch the camera
Press
once and follow the prompts (see page 30).
Press and hold
Press and hold
left.
right.
Press
down.
Press camera key
.
6
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
High-speed (3G) data service is
available and active on your phone.
Check with your service provider for
availability.
(blinking) The phone is sending high-
speed data.
(blinking) The phone is receiving high-
speed data.
High-speed data service is available, but
the phone is dormant.
Understanding screen icons
These icons may appear on your phone’s home
screen and the external LCD.
The phone is operating in IS2000 (1X)
digital mode.
The phone is operating in
IS95 digital mode.
The phone is operating in Analog
(FM) mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
The phone is at the home screen. To
access Menu, press
The phone is at the home screen. To
access Contacts, press
.
.
A call is in progress.
The phone is set to light up instead of
ring.
The phone is set to vibrate or to vibrate
and then ring.
Position location is set to your service
provider and to emergency services.
Position location is set to emergency
services only.
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is roaming outside of its
home service area.
You have a voice message.
The phone is in camera mode.
Camera flash mode is ready.
Camera timer mode is ready.
The battery is fully charged. The more
black bars, the greater the charge.
The alarm clock is set.
The phone is in privacy mode or is
accessing a secure Web site.
User Guide for the Kyocera Candid KX16 Phone
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MAKING AND ANSWERING CALLS
Making a call
Make sure you are in an area where a signal can be
Answering calls
When a call comes in and the flip is closed, the
phone rings and the phone number of the caller
appears on the external screen. If the number is
stored in your Contacts directory, the contact
name also appears.
received. Look for
on the home screen.
Note: The more bars you see in this symbol, the
stronger the signal. If there are no bars, move to
where the signal strength is better.
1. Open the flip and enter the phone number.
When a call comes in and the flip is open, the
phone rings and an animated phone icon appears
on then screen. The phone number of the caller
also appears if it is not restricted. If the number is
stored in your Contacts directory, the contact
name appears.
2. Press
.
3. Press
to end the call or close the flip.
Redialing a number
To redial the last number called, received, or
To answer the call:
missed, press
three times. If you see or hear
•
•
Open the flip.
a message prompting you to speak a name, press
two more times.
Press
-or-
to answer the incoming call
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
•
Press
to answer the incoming call and
turn on the speakerphone.
To silence or ignore the call
1. Press
to select Contacts.
When an incoming call is received, you can
choose to do one of the following:
2. Scroll down the list to find the contact you
want to call.
•
If the flip is closed, press
silence the ringer.
down to
3. Highlight the name and press
to dial
the number.
•
If the flip is open, to silence an incoming call,
press . Then press to answer the call.
8
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
•
If the flip is open, select Options and then
Ignore Call to immediately send the caller to
voicemail. Missed Call appears on your screen
until the caller leaves a message.
Turn on the speakerphone
You may turn on the speakerphone only when the
flip is open.
•
During an incoming call alert, press
to answer the call and turn on the
speakerphone simultaneously.
Note: In the absence of voicemail, this feature
drops the call.
•
Once the speakerphone is turned on,
Answering calls using the flip
“
Speaker is ON” displays on the screen.
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data/fax calls.
Turn off the speakerphone
•
Press
to turn off the speakerphone. The
Speaker is OFF” appears.
1. Select Menu → Settings → Convenience →
Open to Answer.
message “
Dealing with missed calls
2. Select Enabled to set the phone to answer
when you open the flip.
When you have missed a call, “Missed Call”
appears on your screen unless the caller
leaves a voicemail.
Select Disabled to have the phone continue
ringing when you open the flip.
•
To clear the screen, open the flip and press
Adjusting the volume during a call
to select OK.
•
To adjust the earpiece volume during a call,
press up or down.
•
To view details of the call, press
Calls. Highlight the missed call number and
press to select Details.
To return the call, highlight Missed Calls, then
press
to select
Using the speakerphone
•
Your Kyocera Candid KX16 phone has a built-in
speakerphone that you can use during a call when
the flip is open. This function works only for the
current call. Once the call is ended, the
speakerphone turns off and earpiece volume
returns to normal.
.
User Guide for the Kyocera Candid KX16 Phone
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press
to select Options.
Setting missed call alerts
You can set an alert to beep every five minutes
after you have missed a call.
–
–
–
Save adds the phone number to the
Contacts list.
Send Msg allows you to send a picture
message to the phone number.
1. Select Menu → Settings → Sounds →
Alerts → Missed Call Alert.
Erase allows you to erase the call record
2. Press
to select an option:
from the list.
– Vibrate, Beep, Freeway, Game, Bloop,
Winner, Zilofon sets the phone to alert you
once when a new message is received.
Note: If the phone number has been classified as
“secret,” you must enter your four-digit lock code
to view or edit it. For information on the lock
code, see “Changing your lock code” on page 39.
To classify a phone number as secret, see
“Creating a new contact” on page 15.
– Vibrate & Remind, Beep & Remind, Fwy &
Remind, Game & Remind, Bloop & Remind,
Winner & Remind, Zilofon & Remind sets the
phone to notify you once when a new
message is received and then notify you
again every five minutes. To stop a reminder
Calling recent calls
alert, press
– Disabled—Turn off message alerts.
to select Ignore.
1. Press
2. Highlight the number you want to call.
3. Press
down.
.
Viewing recent call details
Details on the last 60 calls you made, received, or
missed are stored in the Recent Calls list and are
identified by the following icons:
Erasing recent calls
1. Select Menu → Recent Calls → Erase Call
Lists.
Outgoing call
Incoming call
2. Select an option: All Calls, Incoming Calls,
Outgoing Calls, or Missed Calls.
Missed call (flashing)
3. Press
to select Yes.
Viewing recent calls
1. Select Menu → Recent Calls.
2. Select a list: All Calls, Incoming Calls,
Outgoing Calls, or Missed Calls.
3. Select a recent call item.
10
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
Using 1-Touch dialing
Speed dialing
To call a contact that has a speed dial location:
Speed dialing allows you to quickly dial a stored
phone number by entering a one- or two-digit
speed dialing location number and pressing
•
From the home screen, press and hold the
speed dialing number. If it is a two-digit
number, press the first digit briefly, then press
and hold the second digit. For example, if the
speed dialing location is 15, press
.
Note: Before you can use speed dialing, you must
save a phone number as a contact and assign a
speed dial location to it. Refer to “Creating a new
contact” on page 15 to create a new contact, or
“Editing or erasing a contact” on page 15 to add
speed dial to an existing contact.
briefly, then press and hold
.
Setting up voicemail
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
Using speed dialing
To call a contact that has a speed dial location:
•
From the home screen, enter the one- or two-
digit speed dialing location and press
.
1-Touch dialing
1-Touch dialing is the fastest way to speed dial a
contact that has a speed dial location.
1. From the home screen, press and hold
2. Press at the message.
.
3. Follow the system prompts to create a
Note: You must (1) enable 1-Touch dialing on
your phone and (2) have a speed dial location
assigned to a contact. See “1-Touch dialing” on
this page.
password and record a greeting.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
Enabling 1-Touch dialing
1. Select Menu → Settings → Convenience →
1-Touch Dialing → Enabled.
Checking voicemail messages
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
2. Press
.
User Guide for the Kyocera Candid KX16 Phone
11
Download from Www.Somanuals.com. All Manuals Search And Download.
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters Emergency mode. This enables the
emergency service exclusive access to your phone
to call you back, if necessary. To make or receive
regular calls after dialing the code, you must exit
this mode.
If you see “New Messages” with the
flip open
1. Press
to select Call, which initiates a call
to your voicemail number.
2. Follow the prompts to retrieve the message.
To clear the screen without checking messages:
•
Press
to select Ignore.
To exit Emergency mode
If you see only the
symbol
When you have completed the emergency call:
1. Press and hold
to initiate a call to your
1. Press
to select Exit.
voicemail number.
2. Press
again to confirm your choice.
2. Follow the prompts to retrieve the message.
Note: To determine who has access to your
location, see “Setting position location” on
page 42.
•
You can set the phone to beep or vibrate every
five minutes to remind you that you have
voicemail. See “Setting message alerts” on
page 36.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
Silencing an incoming call
•
To silence an incoming call quickly, press
. Then press to answer the call.
1. Select Menu → Recent Calls.
This action silences the current call only. The next
call will ring as normal.
2. Select a timer:
–
–
–
All Calls Timer—Tracks all calls you have
made and received. This timer cannot
be reset.
Calling emergency services
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described below.
Home Calls Timer—Tracks all home calls
you have made since you last reset
this timer.
•
Dial your 3-digit emergency code and
press
Roam Calls Timer—Tracks all roaming
calls you have made since you last reset
this timer..
.
12
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
–
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
•
Select Menu → Settings → Sounds →
Minute Alert → Enabled.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
Receiving data or faxes
1. Select Menu → Settings → Sounds →
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. For more information, see page 41.
Roam Ringer.
2. Highlight Enabled to hear the ringer.
3. Press
to set.
Setting roaming alerts
and ringers
Setting Call Guard to avoid
roaming calls
You can set the phone to warn you before you
answer or place a call while roaming.
Setting an alert for roaming
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
•
Select Menu → Settings → Convenience →
Call Guard → Call prompt.
–
The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
1. Select Menu → Settings → Network →
Roam/Svc Alert.
2. Select an option and press
.
–
To accept or place a call while roaming,
–
When no svc alerts you with three tones
you must press
.
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
Note: This functionality is disabled when the
phone is in emergency mode.
–
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
User Guide for the Kyocera Candid KX16 Phone
13
Download from Www.Somanuals.com. All Manuals Search And Download.
–
No roaming prevents you from making
or receiving calls outside of your home
service area.
Controlling network roaming
Specifying digital or analog mode
Depending on services available from your service
provider, you may set the phone to either digital
or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
Note: If your phone has more than one setting for
Automatic, contact you service provider to
determine which one to use.
1. Select Menu → Settings → Network →
Digital/Analog.
2. Select an option and press
.
–
–
–
–
Automatic automatically switches the
phone between digital and analog.
Analog only sets the phone to work in
analog mode only.
Analog call forces a call into analog mode
for the duration of the next call.
Digital only sets the phone to work in
digital mode only.
Turning roaming on or off
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone will accept.
1. Select Menu → Settings → Network →
Roam Option.
2. Select an option and press
.
–
Automatic (recommended setting)
accepts any system the phone service
provides.
14
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
3
STORING CONTACTS
Use your phone’s Contacts directory to store
information about a person or company. Your
phone can hold, on average, about 200
phone numbers.
–
To save now, press
9. To enter additional phone numbers, email and
Web addresses, or notes, press down
to select Save.
repeatedly. For help switching between
numbers and letters for email or Web
addresses, see “Changing modes” on page 22.
Creating a new contact
1. From the home screen, enter the phone
number you want to save, including the
area code.
Adding a code or extension
When you save the phone number of an
automated service, you may include a pause
where your phone would stop dialing; for
example, where you would wait to dial an
extension.
Note: To save a contact without entering a
phone number, select Menu → Contacts →
Add New, select an option, and skip to step 3.
2. Select Save.
1. Enter the first portion of the phone number.
2. Select Options.
3. Select Save New Contact.
4. Enter a name for the contact. If you need to
3. Select a type of pause:
learn how to enter letters, see page 21.
–
–
Time Pause
Hard Pause
5. Select Options to add a symbol or smiley.
6. Press
down once to move to the
4. Enter the remaining numbers.
number field.
5. Select Save and follow the prompts.
7. Select Options to add information to the
contact’s number.
Editing or erasing a contact
To make changes to a contact, take these steps.
1. Select Menu → Contacts.
–
Time Pause stops dialing for two seconds,
then continues to dial.
–
Hard Pause stops dialing until you
select Release.
2. Select View All or Find Name to find the
contact you want to edit.
8. Either save now or add more contact
information.
3. Highlight the contact to edit and press
.
User Guide for the Kyocera Candid KX16 Phone
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Options.
–
–
Primary Number—Make this number the
first one that shows up when you open
the contact.
5. Highlight an option and press
to select
it:, Edit Contact or Erase Contact.
Add Voice Dial—Speak the name of the
contact person for this number so that you
can dial it using voice recognition (VR).
For more information, see page 30.
Editing a phone number
1. Select Menu → Contacts.
2. Select View All or Find Name to find the
–
–
Erase Voice Dial—Erase the voice dial
name associated with the number.
contact you want to edit.
3. Highlight the contact to edit and press
.
Edit Voice Dial—Record a new voice
dial name.
4. Press
number you want to edit.
5. Select Options.
6. Highlight an option for the phone number and
press
down to highlight the phone
7. Enter the new information and follow
the prompts.
8. Select Save, if necessary.
:
–
–
–
–
Send Text Msg—Send a text message to
the phone number you selected.
Finding contact information
To find a phone number or contact, you can (1)
check the frequent contacts list, (2) search the
Contacts directory, or (3) use Fast Find.
Add Speed Dial—Assign or remove the
location you use to speed dial the number.
View Number—See the phone number
you selected.
Checking the Frequent List
From the home screen, select Contacts. The last
15 of your most frequently called contacts appear
when the Frequent List is enabled. Scroll past the
double line for an alphabetical list of all contacts.
Erase Number—Erase the number from
the contact.
–
–
Edit Number—Change the phone number.
Secret—Make the number secret so that
it will not appear on the screen until the
lock code is entered. Secret numbers can
be called without a lock code. (For more
information, see “Restricting calls” on
page 40.)
To enable the Frequent List setting
•
Select Menu → Settings → Convenience →
Frequent List → Enabled.
16
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Fast Find
Searching the Contacts directory
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed dial
1. Select Contacts for a list of all contacts.
To quickly get down the list, enter the first
letter of the contact. The menu skips to that
letter of the alphabet.
entry appears. Press
down to scroll
through matching entries.
-or-
2. Highlight the name you want, then press
2. Select Menu → Contacts.
3. Select a search method:
to call the number.
–
–
View All—List all saved contacts.
Find Name—Locate a specific name.
Enter part of the contact name, then select
Find.
–
Speed Dial List, Voice Dial List, Messaging
Groups, Business List, or Personal List—
Select a contact from a list.
4. Scroll down until you find the name you want,
then press
.
–
To call the contact, highlight the number
and press
.
–
To display contact information, press
.
Setting Fast Find
With Fast Find, you press one or two keys to view
close matches of the number you are looking for.
•
From the home screen,
select Menu → Settings → Convenience →
Fast Find → Enabled.
User Guide for the Kyocera Candid KX16 Phone
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4
USING THE CAMERA
5. Scroll down to highlight an option and press
Tips before operating
your camera
:
–
–
Flash On, Off, or Automatic.
•
You cannot activate the camera while on an
active call or while browsing files in the
media gallery.
Resolution options are 640 x 480, 320 x
240 (best for sending to email and
viewing), and 160 x 120.
•
•
Once the camera is active, the home screen
acts as the viewfinder.
–
–
Low Light Mode brightens the picture for
low light environments.
If you get a “Low memory” error on your
phone’s screen, check your resolution and
quality compression settings. See “Setting up
the camera” on this page.
Self Timer options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps tones from 3 , 5 or 10
seconds down to the time the shutter
snaps the picture automatically. Self Timer
is not available when Multishot mode
is activated.
•
•
If there is no activity within approximately
45 seconds after you turn your camera on,
then the camera quits and returns to the
previous launch point.
–
–
Multishot options are On or Off (default).
When set to On, the camera allows you to
take multiple pictures (up to six) while
the camera key is pressed and held. A tone
will play each time a picture is taken. A
second tone will play when the final
picture is taken.
Menu settings and options can only be
accessed when the camera is active.
Setting up the camera
for photos
1. With the flip open, select Menu → Camera.
- or -
Shutter Sound sets the sound used when
Press the camera key
.
the shutter closes while taking a picture.
2. Select Options.
3. Scroll left or right on the horizontal menu
bar using
.
4. Select Settings.
18
Using the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
–
White Balance allows the camera to adjust
to whites. Useful feature for optimizing
picture taking in different light situations.
Options are Automatic, Fluorescent,
Incandescent, or Daylight.
Menu options for camera mode
1. Select Menu → Camera.
- or -
Press the camera key
.
2. Select Options.
–
–
Color Tone allows the selection of Low
tone, Medium or High.
3. Scroll up or down on the horizontal menu bar
using to scroll through the options:
Quality sets the picture compression. The
higher the compression, the better the
detail of the picture (higher pixel rate).
Options are Low, Medium, or High
(default). When set to High, the picture
file size is larger, using more memory.
•
•
•
•
•
Settings displays available camera settings you
may set up prior to taking a picture.
Brightness allows you to adjust the brightness
of the image in the home screen LCD.
Camera Pictures displays all pictures taken
and stored.
–
LED flashes a light to indicate a picture
has been taken. Options are On (default)
and Off.
Last Picture shows the most recent
picture taken.
Frames allows you to add a frame or a stamp
to your picture. A frame or stamp cannot be
removed once it has been used in a picture.
Restoring camera menu settings
The following settings revert to the default setting
each time you enter and exit the camera
application:
Zoom, Brightness, Contrast, Camera, MultiShot,
Color tone, Frames, Self Timer, and Picture Layout.
The following settings remain at the setting
you selected each time you enter and exit the
camera application:
White Balance, Flash, Resolution, Quality, Shutter
Sound, and LED.
User Guide for the Kyocera Candid KX16 Phone
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip: Press
zoom out.
up or down to zoom in or
Camera mode indicators
and icons
The camera mode displays the following onscreen
indicators and icons:
3. Take the picture by pressing
.
The image is immediately saved to
Media Gallery.
Icon
Description
4. Press
to select OK.
- or -
Press
Flash on
to Erasethe picture.
Top right hand
corner
numbers.
Number of snapshots
remaining
5. Press
to return to the viewfinder and
take more pictures.
Zoom level
6. Press
when finished taking pictures.
Bottom left
hand numbers
Resolution setting
Multishot
Camera key map
Flip open
Key
Camera
Launch the
camera
Menu Screen
Dismiss menu
options
Self Timer (when camera/
capture key is pressed, the
icon switches to a number
and begins counting down)
In
Select Capture to Select OK.
take picture
Select Options
Cancel,
dismisses menu
Scroll menu
options right
Scrolls menu
options left
Select menu
option
Taking a picture
Up
Down
Zoom in
Flip open
Zoom out
1. Select Menu → Camera.
- or -
Takes picture
Press the camera key
.
2. Focus on the image using the phone’s display
as a viewfinder.
20
Using the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
5
ENTERING TEXT, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Entering numbers
•
•
To enter a number while in
a number key once.
mode, press
or
Understanding text entry
screens
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons
To enter a number while in
mode, press and hold a number key until the
number appears on the screen.
Entering words letter by letter
characters
remaining
capitalization setting
text entry mode
Use normal alpha to enter letters.
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, French, or Portuguese,
accented letters are available.
text entry
fields
2. Wait for the cursor to move right and enter the
next letter.
Text entry modes
There are five text entry modes:
Entering words quickly
When you press a series of keys using
checks its dictionary of common words and
guesses at the word you are trying to spell.
mode,
Case change
Numbers only
Normal alpha
1. For each letter of the word you want, press the
Rapid Entry
key once. For example, to enter the word
Add Symbol
“any” press:
2. If the word doesn’t match what you want,
press to look at other word matches.
3. When you see the word you want, press
→
→
.
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in number mode. When
entering a name for a contact, you’re in normal
text mode.
.
User Guide for the Kyocera Candid KX16 Phone
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering symbols
While entering text, you can enter symbols by
pressing
until you see the symbol you want.
Using this method, you have access to the
following symbols:
.
& @ ,
1
‘
:
?
To access the full set of symbols:
1. Select Options.
2. Select
Add Symbol.
down to view the list of symbols.
3. Press
4. Press the number key corresponding to the
symbol you want.
Changing modes
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in
mode, you must change to
mode, enter the numbers, and then change
back to
mode to complete the address.
To change text entry modes, you can either:
•
Press and hold
until the icon for the
mode you want appears.
-or-
•
Select Options, then the mode.
Capitalization settings
You can change capitalization at any time while
entering text. Simply press
to choose upper
or lower case while in Normal Alpha mode.
22
Entering Text, Numbers, and Symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter you
want. For more information, see page 21.
Use mode and press a key once to enter its number.
For more options, see page 21.
Enter a number
Enter a symbol
Press
Press
Press
until you find the symbol you want. See page 22.
Enter a space
.
Erase a character
.
Erase all characters
Press and hold
.
Move the cursor right or left
Move the cursor up or down
Change text entry modes
Capitalize any letter
Press
Press
right or left.
up or down.
Press and hold
.
In
In
mode, press
mode, press
. Choose
. Choose
or
.
Lowercase any letter
Select soft options on the screen
.
Press the appropriate key,
.
User Guide for the Kyocera Candid KX16 Phone
23
Download from Www.Somanuals.com. All Manuals Search And Download.
6
SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive, and
erase text messages from your phone. For
information on voicemail messages, see page 11.
–
Enter a space or comma after the first
number. Then enter another recipient
manually.
Note: You can send a message to up to 10
contacts at once. The messages will be sent
one at a time, once to each addressee.
Important: The features and menus described in
this chapter may vary depending on services
available in your area. In addition, usage charges
may apply to each message. For details, check
with your service provider.
4. When you are done entering addresses,
press
field.
down once to select the Subject:
Sending text messages
5. Enter a subject. To learn how to enter text,
You can only send text messages to phones that
are capable of receiving them, or to email
addresses.
see page 21.
6. When you are done entering a subject,
press
down once to select the Text: field.
7. Enter the message.
Creating a text message
8. To add smileys, select Options → Add Smiley.
1. Select Menu → Messages → New Text Msg.
2. Manually enter the recipient’s phone number
or email address in the Address: field. (To
learn how to enter text, see page 21.)
- or -
Setting sending options
When you are ready to send a message, you have
several options for how and when you want the
message to be received.
Press
to select Options. Then select
1. Once you have completed the message and
Recent List, Contacts, or Group Lists. For
more about group lists, see page 28.
with the Text: field highlighted, press
select Options.
to
3. To add another recipient to this message,
2. Scroll down to select:
choose a method:
–
Add Address—Return to the “To” screen
to add another recipient without losing the
message text.
–
Press
to select Options. Then select
Recent List, Contacts, or Group Lists.
- or -
24
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Save Message—Save the message without
sending.
When you start a message, the maximum
character limit (“169” in the example) appears
below the text entry field. This number counts
down as you enter characters, until it reaches 0. If
you continue to enter text after this counter
reaches 0, a message segment may be appended.
When you reach the message size limit you are
prompted to edit the message or alerted that the
message is being appended.
Save as Quick Text—Save the message you
have just entered as a prewritten message,
then return to the message entry screen so
you can send the message.
–
Settings/ Set Priority—Label the message
as “Urgent.”
3. Press
to select Send.
Receiving incoming calls while
creating messages
If you cannot send messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erasing
messages” on page 27.
•
If you don’t wish to answer the call, select
Options → Ignore Call. The phone returns to
the message screen.
•
To answer the call, press . Your message is
saved to the Saved folder. To return to the
message, select Menu → Messages → Drafts
Understanding appended messages
and press
to select the message.
characters
remaining
Viewing the OutBox
You can check the status of messages you have
sent as long as they have been saved to
the OutBox.
text entry
field
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
Important: Your service provider will charge you
for each message segment.
User Guide for the Kyocera Candid KX16 Phone
25
Download from Www.Somanuals.com. All Manuals Search And Download.
To set the Outbox
The message has been received by the
recipient you specified.
The Outbox default is set to disabled to conserve
memory. If you want to save your sent messages:
The message has been received and
opened by the recipient you specified.
(This symbol may not be available.
Check with your service provider.)
•
Select Menu → Messages → Msg Settings →
Save to Sent.
–
–
Select Enabled to save all sent messages to
the Outbox.
The message has been sent to more
than one recipient.
Select Prompt to alert you to choose
whether or not to save your message.
The message has never been sent, or
has not been sent since it was last
modified. You can cancel delivery of the
message.
To view the OutBox
1. Select Menu → Messages → OutBox.
2. Press
up or down through the list of
messages. One of the following symbols
appears next to each message:
Retrieving text messages
When a text message is received, your screen
displays “New Messages”, along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
The message is pending and will be sent
when possible. You can cancel delivery
of the message.
The scheduled message will be sent at
the scheduled time. You cannot cancel
delivery of the message.
If you see the “New Messages” note
You can choose to:
•
•
View the message—Press
.
The message cannot be sent
because service is not available. An
alert appears on your phone if the
message cannot be sent.
Ignore the message—Press
.
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. You can find the
older message in the InBox:
The scheduled message has been sent
and will be delivered as scheduled. You
cannot cancel delivery of the message.
Select Menu → Messages → InBox.
26
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Save Object(s), such as sound or pictures,
from the message. (This option is
available if the incoming message includes
a graphic or sound.)
If you see the
symbol
If the
symbol is flashing, the message is
urgent.
1. Select Menu → Messages → InBox.
–
–
Save Contact to save the sender’s phone
number or email address in your
Contacts list.
A list of all your received messages appears.
New, unread messages appear in bold.
indicates an “Urgent” message.
Save as AutoText to save the text from the
message as AutoText, which you can insert
into other messages. Graphics and sound
will not be saved as part of AutoText.
2. Press
up or down to scroll through the
list of messages.
3. Press
to read a message.
3. Select Done.
Reading the message
Note: The
symbol indicates that a graphic did
The options available to you may vary. Check with
your service provider.
not come through. It may be too large or
incorrectly formatted.
Note: Sounds embedded in text messages will not
play if the phone is set to Silence All mode.
Setting message alerts
1. If the text message is long, press
down to
You can set your phone to alert you of incoming
text messages or pages. For more information,
see “Setting message alerts” on page 36.
view the entire message.
2. When you are finished, you can Reply to the
sender, Play the sound embedded in the
message, Erase the message, Save the
message to your Saved folder, or set additional
Options for the message:
Erasing messages
Your phone is designed to store 99 text messages
and pages. It is a good idea to erase old messages,
as messages take up memory in your phone.
–
–
–
View Sender information.
You have the option of erasing text messages and
pages as you send or read them, erasing them one
at a time from the list in the OutBox or InBox, or
erasing them all at once.
Forward the message.
Reply with Copy to reply to the message
with a copy of the original attached.
User Guide for the Kyocera Candid KX16 Phone
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing single messages
Erasing messages automatically
1. Select Menu → Messages.
Use this setting to have old messages
automatically erased from the InBox when
memory is low.
2. Press
you want to erase: InBox, OutBox, or Saved.
3. Press
down to the type of text message
1. Select Menu → Messages → Msg Settings →
Auto-Erase.
.
4. Highlight the message to erase and press
2. Highlight Old InBox Msgs and press
.
.
Older messages will now be erased as new
messages are received.
5. Select Options.
6. Select Erase to erase the message. A
•
To disable this setting select Menu →
Messages → Msg Settings → Auto-Erase →
Disabled.
notification appears: “Erase this message?”
7. Select Yes to erase the message.
Note: You can erase a scheduled message from
the OutBox, but you cannot cancel delivery of
the message.
Customizing message settings
To make messaging easier, you can customize
settings for sending and receiving messages.
Erasing all messages
1. Select Menu → Messages → Erase Messages.
Creating group lists
2. Select a folder to erase all messages from:
InBox, OutBox, Sent, Saved Folder, or Drafts
Folder. To erase messages from all folders,
select All Messages.
You can create and save a list of multiple
recipients. Your Candid KX16 phone stores five
group lists with up to 10 recipients per list.
1. Select Menu → Messages → Group Lists →
3. A message appears: “Erase all messages?”
Create New.
Select Yes to erase messages or No to cancel.
2. Enter a title for the list. For help entering text,
see page 21.
3. Press
to select Next.
28
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To enter the first phone number or email
address, select an option:
–
–
–
Recent List to select numbers from your
Recent List.
New Address to enter the phone number
or email address manually.
Contacts List to select numbers from your
phone book.
5. Highlight a contact and select Select.
6. Highlight the contact’s number and select
Select.
7. Select Options to select the next number.
8. Select Recent List or Contacts then the
contact to add.
9. When finished, select Done.
10. To send a message to your new group, see
“Sending text messages” on page 24.
User Guide for the Kyocera Candid KX16 Phone
29
Download from Www.Somanuals.com. All Manuals Search And Download.
7
USING VOICE RECOGNITION
Voice recognition allows you to make and
answer calls by speaking commands into the
phone’s microphone.
Editing a voice tag
1. Select Menu → Contacts → Voice Dial List.
2. Highlight the contact you want to edit, and
Note: You cannot use voice recognition to end a
press
to select it.
call; you must press
when the flip is open.
3. Highlight the phone number, select Options.
4. Select Add Voice Dial, Erase Voice Dial, or
Setting up voice dialing
To make or receive calls using voice dialing,
contacts must be saved with associated voice tags.
Edit Voice Dial.
5. Follow the prompts.
Calling using voice tags
1. If you haven’t already done so, record a voice
Creating a voice tag for a contact
1. Select Menu → Contacts → View All.
2. Highlight a contact to add a voice tag to and
tag for the person you wish to call.
2. From the home screen, press
. The phone
press
to select.
responds: “Say a name.”
3. Press
down once to select the contact’s
3. Say the name of the person you want to call.
number.
4. If the name you said matches a contact in the
Voice Dial List, the phone responds: “Calling
(Name).” Remain silent to make the call, or
say No to cancel.
4. Press
to select Options.
5. Select Add Voice Dial.
6. Follow the voice prompts to record a name for
the contact.
Note: If the phone finds multiple voice tags
that sound like the name you said, you will be
asked to verify which name you want to call.
Say Yes when you hear the correct name. Say
No when you hear an incorrect name.
Viewing entries with voice tags
•
Select Menu → Contacts → Voice Dial List. A
list of all contacts with assigned voice
tags appears.
5. When you are finished with the call, press
. You cannot end the call with a voice
command.
30
Using Voice Recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
–
Say Verify to cause phone to repeat the set
of digits that you input.
Erasing all voice tags
To erase all voice name dial recordings in
your phone:
Say Cancel to exit voice recognizer and
return to the home screen.
1. Select Menu → Settings → Voice Features →
Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Erase Voice Dial.
2. Select Yes.
Calling using digit dialing
When using digit dialing, you speak digits to dial a
phone number.
Using voice features with
accessories
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to an accessory such as a hands-free
car kit or headset (both sold separately).
Note: You cannot speak a string of digits. You
must speak one digit at a time and wait for
the prompt.
1. From the home screen, press
. The phone
Note: The following features apply only to the
installed hands-free car kit unless noted.
responds: “Say a name or say Dial.”
2. Say Dial. The phone responds: “Speak a digit.”
To shop for these accessories, visit
www.kyocera-wireless.com/store or call
800 349-4188 (U.S.A. only) or 858 882-1410.
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
Waking up the phone
If you pause, the phone prompts you with the
following five options. After the prompt, speak
an option.
If your phone is connected to a professionally
installed Kyocera hands-free car kit, you can use a
voice command to activate the phone to make a
phone call.
–
Say Clear to erase the digit last entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear” again. When the phone prompts
you with “Clear entire phone number?”,
say “Yes” to clear or “No” to cancel.
To activate the Voice Wake-up setting:
•
Select Menu → Settings → Voice Features →
Voice Wake-Up → With accessory.
–
Say Call to dial the number.
User Guide for the Kyocera Candid KX16 Phone
31
Download from Www.Somanuals.com. All Manuals Search And Download.
To wake up the phone:
To answer a call:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
saved contact entry, then the phone says
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 32.
“Incoming call from (Name), answer?”
•
Say Yes or press any key except
.
Answering the phone
Ignoring an incoming call
You can set the hands-free car kit to either (1)
answer automatically or (2) answer using a voice
command.
To ignore an incoming call, do one of
the following:
•
•
Say No and press
to silence the alert.
Answering automatically
Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
You can set your phone to answer automatically.
•
Select Menu → Settings → Accessories →
Auto-Answer → After 5 seconds.
Training voice recognition
Answering using voice commands
If your phone is having trouble recognizing your
voice, you can train it with the commands Yes,
No, and Wake up.
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
Kyocera hands-free car kit.
1. Select Menu → Settings → Voice Features.
2. Select Voice Training.
•
Select Menu → Settings → Accessories →
Auto-Answer → Disabled.
3. Read the message and press
to select OK
To activate the Voice Answer setting:
and continue. Cancel returns you to the
previous screen.
1. Select Menu → Settings → Voice Features →
Voice Answer.
4. Select Train All or the item you want to train.
2. Highlight Enabled, then press
3. Select Menu → Settings → Silent Mode →
Normal Sounds, then press
.
5. Follow the prompts for each word until
training is complete.
.
32
Using Voice Recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
8
CUSTOMIZING YOUR PHONE
The contents of the Settings menu are as follows.
Silent Mode
Vibrate Only
Display
My Banner
Voice Features
Add Voice Dial
Network
Data/Fax Calls*
Vibe then Ring
Lights Only
Normal Sounds
Main Menu View
Color Themes
Wallpaper
Screen Saver
Backlighting
Auto-Hyphen
Language
Time/Date
Contrast
Brightness
Erase Voice Dial
Voice Training
Voice Wake-Up
Voice Answer
Expert Mode
Privacy Alert*
Data Setup
User Name
Set Phone Line*
Roam/Svc Alert
Roam Option*
Digital/Analog*
Location
Sounds
Ringer Volume
Ringer Type
Business Ringer
Personal Ringer
Roam Ringer
Flip Open
Flip Closed
Pwr On/Off Sound
Key Volume
Messaging
Alerts
Signature
Edit QuickText
Callback Number
Text Msg Receipt
Save to Sent
Accessories
Pwr Backlighting
Headset Ringing
Auto-Answer
Com Port Speed
TTY Device
Convenience
Airplane Mode
Open to Answer
Fast Find
Auto-Erase
Default Text
Key Length
Key Sound
Alerts
Smart Sound
Minute Alert
Earpiece Volume
Spkrphone Volume
Frequent List
Hold Call
1-Touch Dialing
Web Prompt*
Call Guard
Voicemail Number
Security
Lock Phone
Limit Calls
New Lock Code
Erase Contacts
Emergency Numbers
*Not available on all phones. Check with your service provider.
User Guide for the Kyocera Candid KX16 Phone
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Silencing all sounds
Choosing ringers
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages).
Your Kyocera Candid Candid KX16 phone has
multiple ringers you can choose to use for
incoming calls.
You can silence all sounds and set the phone to
vibrate or light up when you receive calls
and alerts.
1. Select Menu → Settings → Sounds →
Ringer Type.
2. Scroll down the list to hear the different rings.
3. Press
to select a ringer from the list.
Setting the phone to vibrate or
light up
Note: Downloaded ringers are added to the end
of the standard list of ringers.
1. Select Menu → Settings → Silent Mode.
2. Choose an option and press
:
Assigning business and
personal ringers
–
Vibrate Only—Causes the phone to vibrate
for the duration of the incoming call or
other alert. appears.
You can assign ringers to contacts classified as
business or personal in your Contacts directory.
–
Vibe then Ring—Causes the phone to
vibrate for the first 10 seconds and then
ring for the remainder of the incoming
Note: To classify a contact as Business or
Personal, see page 15.
1. Select Menu → Settings → Sounds.
call alert.
appears.
2. Ηighlight Business Ringer or Personal Ringer
–
–
Lights Only—Causes the phone to light up
for the duration of the incoming call or
and press
.
3. Select a ringer and press
.
other alert.
appears.
Normal Sounds—Causes the phone to
ring for the incoming call or alert (in
effect, returns phone to a non-silent
mode).
Importing ringers
You can download additional ringers to your
phone using the Kyocera Phone Desktop software
and Ringster, if available (sold separately). To
purchase this software and other accessories, visit
3. Press
to return to the home screen.
Note: The phone will ring when it is attached to
an external power source (such as a charger),
even if all sounds have been silenced.
34
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the earpiece volume
Setting sounds for your phone
To adjust the earpiece volume manually during a
You can set your phone to sound tones when you
open and close the flip, and when you turn the
phone on and off. Sounds will not occur during
an incoming call, if you are in a call, or if a
headset or car kit is attached to your phone.
call, press the
key up or down
To set the earpiece volume:
1. Select Menu → Settings → Sounds →
Earpiece Volume.
2. Press
right to increase the volume, or left
Set sound when flip opens
to decrease the volume.
1. Select Menu → Settings → Sounds →
Flip Open.
3. Press
to select Save.
2. Scroll through the list to hear the sounds.
Adjusting the ringer volume
3. Select a sound and press
to save.
1. Select Menu → Settings → Sounds →
Ringer Volume.
Set sound when flip closes
2. Press
right to increase the volume, or left
1. Select Menu → Settings → Sounds →
Flip Closed.
to decrease the volume.
3. Press
to select Save.
2. Scroll through the list to hear the sounds.
3. Select a sound and press
to save.
Adjusting speakerphone volume
1. Select Menu → Settings → Sounds →
Set sound when phone powers on or
off
Spkrphone Volume.
2. Press
right to increase the volume, or left
1. Select Menu → Settings → Sounds →
Pwr On/Off Sound.
to decrease the volume.
3. Press
to select Save.
2. Select Enabled. To deselect this sound,
select Disabled.
Adjusting key tone volume
You can change the volume of the tones the phone
makes when you press the keys.
Adjusting volume
You can adjust the earpiece, speakerphone, and
ringer volume as well as key tones.
1. Select Menu → Settings → Sounds →
Key Volume.
User Guide for the Kyocera Candid KX16 Phone
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press
right to increase the volume, or left
Using shortcuts
Your Kyocera Candid KX16 phone comes with
four shortcuts when in standby mode (flip open).
to decrease the volume.
3. Press
to select Save.
Setting key length
Press
Press
Press
Press
up
down Access Recent Calls
left Launch Web browser
right Record voice memo
Access your custom menu
You can change duration of the tones the phone
makes when you press the keys.
1. Select Menu → Settings → Sounds →
Key Length.
2. Choose Normal or Long.
3. Press
.
Creating a custom menu
You can create a custom menu that contains your
favorite features. After you set up your menu,
Setting message alerts
You can choose how you want be alerted of
incoming voicemail, pages, or text messages.
simply press and hold
up to access it.
1. Press and hold
up to launch
1. Select Menu → Settings → Messaging →
Custom Menu.
Alerts.
2. Press
3. Scroll through the available options.
4. Press to select or deselect options. You
may select more than one feature. Items
appear in alphabetical order in the menu.
to select Edit.
2. Select the type of alert: Message Alert, Page
Alert, or Voicemail Alert.
3. Press
to select an option:
–
Vibrate, Beep, Freeway, Game, Bloop,
Winner, Zilofon sets the phone to alert you
once when a new message is received.
5. Press
to select Save.
–
Vibrate & Remind, Beep & Remind, Fwy &
Remind, Game & Remind, Bloop & Remind,
Winner & Remind, Zilofon & Remind sets
the phone to notify you once when a new
message is received and then notify you
again every five minutes. To stop a reminder
Updating your custom menu
1. Press and hold
up to launch
Custom Menu.
2. Press
3. Press
4. Press
to select Edit.
to select or deselect options.
alert, press
to select Ignore.
to select Save.
–
Disabled—Turn off message alerts.
36
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press
to select Edit.
Creating a shortcut to frequent
contacts
3. Press
to clear the screen.
4. Enter your new text.
By default, your phone lists your entire contacts
list when you select Contacts. You can also set the
phone to show a list of your most
5. Press
to select Save.
Choosing a menu view
frequent contacts.
Two menu views are available:
1. Select Menu → Settings → Convenience →
Frequent List.
1. Select Menu → Settings → Display →
Main Menu View, then the option you want:
2. Select Enabled to include the list or
Disabled to remove it.
–
Graphic displays graphical icon view of
menu items.
Using the Frequent Contacts shortcut
–
–
List displays menu items in text format.
•
From the home screen, press
to select
Wheel displays a rotating graphic image of
the menu items.
Contacts. Your 15 most frequently called
contacts appear at the top of the list, followed
by your complete contact list.
2. Press
up or down to scroll menu views.
to return to the home screen. The
3. Press
Choosing a different language
Your phone may display alternative languages.
next time you select Menu, you will see the
menu view you selected.
1. Select Menu → Settings → Display →
Adjusting the backlighting
Language.
Your screen lights up while you are in a call or
when you press a key on the keypad. However,
you can set the length of time that bright
backlighting remains on.
2. Select a language, and press
.
Personalizing the screen
Changing your banner
1. Select Menu → Settings → Display →
Backlighting → Duration.
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. The banner can be up to 14 characters long.
2. Select an option from the list:
–
7 seconds, 15 seconds, or 30 seconds—
Turn backlighting on for 7, 15,
1. Select Menu → Settings → Display →
or 30 seconds after your last keypress.
My Banner.
User Guide for the Kyocera Candid KX16 Phone
37
Download from Www.Somanuals.com. All Manuals Search And Download.
–
7 sec. & in call, 15 sec. & in call, or 30 sec.
& in call—Turn backlighting on for the
duration of a call, and for 7, 15, or 30
seconds after your last keypress.
Changing the display contrast
1. SelectMenu→Settings→Display→Contrast.
2. Press
left or right to adjust the contrast.
3. Press
to select Save.
Note: These settings drain the battery more
quickly and reduce talk and standby times.
Setting numbers to auto-hyphenate
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan.
Using Power Save Mode
You can conserve battery life by activating Power
Save mode to dim the backlight set in the
procedure above. The backlighting appears for
the selected duration but is less bright than with
Power Save off.
For example, 1-222-333-4444.
•
Select Menu → Settings → Display →
Auto-Hyphen → Enabled.
•
Select Menu → Settings → Display →
Selecting a screen saver
Backlighting → Pwr Save Mode → On.
Screen savers appear on the home screen when
the flip is open and are activated 10 seconds after
the last keypress. Incoming calls and alerts
override screen savers.
Setting power backlighting
You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
1. Select Menu → Settings → Display →
Screen Saver.
Note: Power backlighting may not be available
with the optional desktop charger or other
accessories.
2. Highlight a screen saver and press
. The
image displays.
3. Press
to assign the screen saver.
1. Select Menu → Settings → Accessories →
4. Press
to return to the home screen and
Pwr Backlighting.
wait 10 seconds to view the screen saver you
chose.
2. Select Always On to keep backlighting on.
Note: The battery charges more slowly when
power backlighting is on.
Note: Downloaded screen savers are added to
the end of the list.
38
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting wallpaper
Creating a secure environment
Wallpaper appears on the home screen.
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
1. Select Menu → Settings → Display →
Wallpaper.
2. Highlight a wallpaper design and press
.
3. Press
to assign the wallpaper.
Changing your lock code
4. Press
to return to the home screen.
The lock code is typically 0000 or the last 4 digits
of your phone number.
Selecting a color theme
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
You can select a color theme for the display
background of your phone.
3. Select New Lock Code. A message appears:
1. Select Menu → Settings → Display →
“Change Code?”
Color Themes.
4. Press
digit code.
to select Yes and enter a new four-
2. Scroll through the options to view the
color themes.
5. Enter your new lock code again.
3. Highlight a color theme from the list and
press
.
Locking your phone
4. Press
to return to the home screen.
When your phone is locked, you can call only
emergency numbers or your service provider
number. You can still receive incoming calls.
Choosing a different time/date format
1. Select Menu → Settings → Display →
Time/Date.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
2. Highlight the option you want.
3. Press
to save the setting.
4. Highlight an option:
–
–
Never does not lock the phone.
On power up locks the phone every time
you turn it on.
–
Now locks the phone immediately.
5. Press
.
User Guide for the Kyocera Candid KX16 Phone
39
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Enter your four-digit lock code.
3. Select Limit Calls.
Unlocking the phone
1. From the home screen, press
to
select Unlock.
4. Choose an option:
2. Enter your four-digit lock code.
–
–
No Limit limits no calls.
Limit Outgoing calls only. Incoming calls
can still be received and answered.
Designating emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
–
Limit All calls, both incoming and
outgoing.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Emergency Numbers.
4. Select an Unassigned slot.
Erasing all contacts
You can erase all entries from your
Contacts directory.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts.
5. Enter the phone number, including the area
code. Do not enter 1 before the area code.
6. Press
Notes:
to select Done.
4. Select Yes to erase all contacts. A message
appears: “Erase ALL Contacts?”
•
You can view these numbers only when they’re
being entered for the first time.
5. Press
to select Yes to erase all contacts.
Network settings
•
•
You cannot edit these numbers.
To make a call to an emergency number from
a locked phone, you must dial the number
(including area code) exactly as it was stored
in Emergency Numbers.
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Restricting calls
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
You can restrict the calls that can be made from
your phone to emergency numbers, your
contacts, and service provider numbers.
1. Select Menu → Settings → Security.
40
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
Note: To purchase a cable call (800) 349-4188
(U.S.A. only), (858) 882-1410, or visit
1. Connect the phone to the laptop or PC.
1. Select Menu → Settings → Network →
2. Set the Com speed.
Set Phone Line.
3. Select Menu → Settings → Network →
2. Select one of the two lines and press
.
Data/Fax Calls.
4. Press
to select an option:
Data Settings
–
–
Voice only—Allow only voice calls.
Setting Com port speed
Fax, next call or Data, next call—Set the
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
–
Fax, until off or Data, until off—Forces the
phone into data mode until the phone is
turned off.
1. Select Menu → Settings → Accessories →
Com Port Speed.
2. Select the speed. The options are: 19.2 kbps,
Note: You cannot receive voice calls while the
115.2 kbps (default), 230.4 kbps and Other.
phone is in data/fax mode.
Note: There may be a higher charge for making
calls using high-speed data in areas where 1X
service is available. Check with your service
provider for details.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired. Note: Enable TTY only when
using the phone with a TTY device.
Setting the phone to receive data
or faxes
1. Connect the TTY device to the phone.
2. Enter
your keypad.
from
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode. To receive data or
faxes, you must connect the phone to a laptop or
PC and switch the phone from voice mode to data/
fax mode.
3. Press
4. Press
5. Press
6. Press
to select the TTY option.
to clear the message.
down to highlight TTY On.
.
User Guide for the Kyocera Candid KX16 Phone
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: TTY/TDD service may not be available.
Check with your service provider for more
information.
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (911, 111, 999, 000, etc.), in
markets where service has been implemented.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
1. Select Menu → Settings → Network →
Location.
2. At the message prompt, press
to select
OK and continue.
3. Select 911 Only or Location On.
–
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, etc.).
–
Location On shares your position
information with your service provider’s
network, in addition to emergency
services.
42
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
9
USING MEDIA GALLERY
The media gallery stores and displays all the
image and sound files in the phone.
– Modify allows you to change the following:
Rotate - select 90º right, 180º, 90º left, Flip
horizontal, and Flip Vertical.
Resize - select 90%, 75%, 50%, and 30%.
Accessing files
1. Select Menu → Media Gallery.
2. Select an option:
Brightness - press
Sharpness - press
Saturation - press
left or right to adjust.
left or right to adjust.
left or right to adjust.
–
–
Camera Pictures displays thumbnails of
the photos you have taken in
chronological order.
Hue - press
left or right to adjust.
Auto Adjust - automatically adjusts
all levels.
Color Tone - change the picture to
grayscale, negative, sepia, or emboss.
Images displays a list of categories that
contain preloaded, downloaded, saved, or
created files such as wallpaper, screen
savers, or caller IDs.
– Zoom allows you to zoom in or out on
the picture.
–
Sounds displays a list of categories that
contain saved or downloaded sounds such
as ringers and voice memos.
– Take Picture to snap another photo.
– Lock to prevent accidentally erasing
the photo.
– Rename the picture.
Browsing pictures
1. Select Menu → Media Gallery →
– Details of the file.
Camera Pictures.
Browsing images
The images menu allows you to assign your files
to various applications.
2. Highlight a picture and press
to
select View.
3. Press
to select Erase.
1. Select Menu → Media Gallery → Images.
- or -
2. Use
to highlight the menu item you want:
Press
to select Options:
–
Saved Images displays images you have
–
Assign picture as a Caller ID or
saved.
as wallpaper.
–
Wallpapers displays wallpaper selections.
User Guide for the Kyocera Candid KX16 Phone
43
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
–
Screen Savers displays available
screensavers.
–
–
Ringers contains ringers saved on your
phone.
Caller IDs displays pictures and images
that can be assigned to saved contacts.
Voice Memos contains voice memos you
made to yourself.
Doodles displays files created with
3. Select OK to display the files in that menu.
Doodler.
4. Select Options. Choose from the following
3. Select OK to display the files in that menu.
options:
4. Highlight an image and select Options.
Note: Options vary according to menu
selection.
–
–
–
–
–
Erase the sounds.
Assign a sound as a ringer.
Rename a ringer.
Choose from the following options:
Details gives you the file size of the sound.
Erase All erases all sounds stored.
–
–
–
–
Send launches the messaging application.
Erase the image.
5. Select Close when done.
Set As Default sets as default setting.
Assign an image as a caller ID, wallpaper
Creating free space
or screen saver.
If your phone does not have enough memory to
store a file, a dialog displays and asks you if you
want to create space.
–
–
–
Rename an image.
Details gives you the file size of the image.
Erase All erases all images stored (images
•
Select Yes to display the file browser
(categories) with the memory needed and
available memory.
must not be locked).
5. Select
or
when done.
•
Select No to return to the previous screen and
no files are saved or downloaded.
Browsing sounds
The sounds menu allows you to view and listen to
all sound files stored on the phone.
The actions are limited to the following:
–
Erase the selected file (you cannot erase
1. Select Menu → Media Gallery → Sounds.
locked files).
2. Use
to highlight the menu item you want:
–
Done re-attempts the download or save.
–
Saved Sounds contains sounds saved on
your phone.
44
Using Media Gallery
Download from Www.Somanuals.com. All Manuals Search And Download.
10 TOOLS & GAMES
Erasing a saved voice memo
Voice Memo
The Voice Memo tool allows you to record and
play back audio memos.
1. Select Menu → Tools & Games →
Voice Memo → Recorded Memos.
2. Highlight the memo and select Options.
Recording a voice memo
3. Select Erase. The prompt “Erase file?”
1. Select Menu → Tools & Games →
Voice Memo → Record New.
-or-
appears.
4. Select Yes or No.
Press and hold
2. Say your memo and press to
right.
Scheduler
The Scheduler allows you to schedule events and
set reminder alerts.
select Stop.
3. Select Save to save your memo.
Note: If an incoming call is received while you’re
recording a memo, the memo is saved and the
incoming call screen displays.
Creating an event
1. Select Menu → Tools & Games → Scheduler.
2. Press
down to select Add Event and
.
Playing or reviewing a memo
press
1. Select Menu → Tools & Games →
3. Enter a name for the event. For help entering
Voice Memo → Recorded Memos.
text, see page 21.
2. Highlight the memo to review.
4. Select Next.
3. Press
to select Play.
5. Enter the time, length, and alarm for event.
Naming a saved voice memo
–
Press
minutes, and timing of alarm.
Press left or right to move
between fields.
up or down to select date, hour,
1. Select Menu → Tools & Games →
Voice Memo → Recorded Memos.
–
2. Highlight the memo and select Options.
3. Select Rename. Enter a name for the memo.
4. Select Save.
6. Select Next, enter a note if required.
7. Select Done.
5. Press
to return to the home screen.
User Guide for the Kyocera Candid KX16 Phone
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing, editing, or erasing an event
Tip Calculator
The Tip Calculator helps you calculate how much
tip to include on a bill.
1. Select Menu → Tools & Games → Scheduler.
2. Select View Day or View Month to find the
event you want to view, edit, or erase.
1. Select Menu → Tools & Games →
Tip Calculator.
3. Press
an event and press
4. Select Edit or Options. Follow the prompts.
up, down, left, or right to highlight
to select it.
2. Enter the amount of your bill.
3. Select Next.
5. Press
to return to the home screen or
to return to scheduler options.
4. Select the amount you want to include as a tip
(10%, 15%, 18%, 20%, Other) and press
. Your total bill appears, including tip.
Alarm Clock
Use the Alarm Clock to set an alert for a specific
time. The alert occurs only if the phone is on.
1. Select Menu →Tools &Games →Alarm Clock
2. Select Set.
5. To split the bill, press
6. Press to clear the default of 2 guests.
7. Enter the number of guests and press
to select Split.
to
select Next. The amount each guest pays is
calculated.
–
–
–
Press
and minutes.
Press
hours, minutes, and a.m./p.m.
Use the phone keypad to enter numbers.
up or down to select an hour
8. Select Done.
left or right to switch between
Calculator
Use the calculator for basic mathematical
equations.
3. Press
to select Done and save the setting.
1. Select Menu → Tools & Games → Calculator.
4. When the alarm rings, select Off to turn off the
alarm or Snooze to silence the alarm for
10 minutes.
2. Use the keypad to enter numbers.
3. Use
to select mathematical operations.
Navigation:
Left x (multiply) Up
Right ÷ (divide) Down - (subtract)
4. Press to calculate the result.
+ (add)
46
Tools & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: Enter 5, press
left to select X, enter
4. Select Reset to clear the counter.
5. Press to return to the home screen.
2, then press
to obtain the result of 10.
to return to the home screen.
to clear the screen.
5. Press
World Clock
World Clock may not be available on your phone.
Check with your service provider for availability.
The World Clock lets you check times in cities
around the world in relation to local time.
6. Press
Options
Adds displayed digit to the value stored
in memory.
M+
Displays currently stored value on
screen.
1. SelectMenu →Tools&Games →WorldClock.
MR
MC
The World Clock menu is displayed. Your
local time and date is on the first line,
followed by your selected world city and that
city’s time and date. When you first access
World Clock, you are prompted to select a
city.
Clears value currently stored in memory.
Timer
This timer counts down for a specified amount of
time. It beeps when that amount of time has
elapsed.
2. Press
to select Cities.
The Cities menu is displayed, showing 85
world cities in alphabetical order.
1. Select Menu → Tools & Games → Timer.
2. Select Set.
3. Press
up or down to scroll through the
cities list. You can also use the number keys
(2-9) to alphabetically tab through the list.
3. Press
minutes, and seconds. To move the cursor,
press left or right.
up or down to set the hours,
4. Press
to select a city, like Athens.
4. Select Start and begin the countdown.
Select Stop to pause the countdown.
Select Reset to clear the timer.
The World Clock menu is displayed again,
with Athens’ time and date.
From the World Clock menu, you can also select
5. Press
to silence the alarm.
Search to search by city or country.
1. Select Search from the World Clock menu.
Stopwatch
1. Select Menu → Tools & Games → Stopwatch.
2. Select Start to begin counting.
The Search By menu is displayed.
3. Select Stop to stop counting.
User Guide for the Kyocera Candid KX16 Phone
47
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select your type of search.
-or-
–
–
Press
Press
by Country.
search by City.
•
Select Menu → Tools & Games →
Flashlight → Turn On. The flashlight remains
on for 15 minutes.
down, then press
to search
3. If you search by City, the Find City screen
To turn the flashlight off, select Menu → Tools →
Flashlight → Turn Off.
- or -
is displayed.
a. Use your number keys (2-9) to enter the
letter(s) by which you want to search. For
example, press 2 once to enter the letter A.
Press
.
b. Press Search.
Games
c. Cities beginning with A are displayed, like
The games in this section may not be available
on your phone. Check with your service provider
for availability.
If you receive an incoming call alert while you are
playing Brick Attack™ or Race 21™, the game is
paused and exited. You can return to play once
the call alert ends. Games do not remain paused if
the phone is turned off or loses power.
Anchorage, Athens, and Atlanta.
d. Use
press
to move through the list, then
to select a city.
4. If you search by Country, the Find Country
screen is displayed.
a. Use your number keys (2-9) to enter the
letter(s) by which you want to search. For
example, press 2 once to enter the letter A.
Brick Attack
b. Press Search.
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of
the screen.
c. Countries beginning with A are displayed,
like Afghanistan, Algeria, and Australia.
to move through the list, then press
to select a country.
Use
1. SelectMenu →Tools&Games→BrickAttack.
Flashlight
2. Press
to select Yes at the prompt, “Turn
off backlight to conserve battery?”
The flashlight is located on the top-right corner of
your phone. You can turn on the flashlight in
two ways:
3. Press
to select New.
–
To pause the game, press
to Resume.
, then press
•
From the home screen, press and hold
. The
flashlight remains on until you release the key.
48
Tools & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
To move the paddle, press
right.
left or
–
–
You lose points each time you exceed 21
in a column.
To exit the game, highlight Exit and press
Select Skip to skip one card per round.
.
5. Press
to select
to get your score
and advance to the next round.
Race 21
6. Select an option and press
to select it.
New Game—Initiates game play. To pause
the game, press . From here you can
choose Resume, New or Quit.
Resume Game—Returns you to the game
This game is a timed variation of Black Jack. Each
game comprises three 90-second rounds. To
score points, add cards in each of the four
columns, trying to reach but not exceed 21 in
each column within during the course of the
game.
–
–
–
–
you were last playing.
Scoreboard—Provides you with the top
1. Select Menu → Tools & Games → Race 21.
five scores.
2. Press
at the splash screen.
Music—Choose when you hear music
with this game. Select from Music Always,
Sound Effects, Instructions, Credits,
During Title, or No Music.
3. Select New Game. The first card to be placed
is shown at the top left of the screen. Press a
key to add a card to the row as follows:
Add cards to the first row
Add cards to the second row
Add cards to the third row
Add cards to the fourth row
7. Press
to end all games.
Doodler
You can create and save graphics on your phone.
Shortcut: Press
left or right to choose arrows
1. Select Menu → Tools & Games → Doodler.
at the bottom of the screen. Then press
add cards to corresponding rows.
Note: Each time you place a card, a new card
appears for placement.
to
2. Press
at the splash screen.
3. Select New Doodle to open the drawing screen
The cursor is located in the middle of the
screen.
4. Select Options to choose the Colors, Tools,
4. Continue placing cards until you are satisfied
Lines, or Shape you want to use.
with your selections.
–
You can pause or end the game at any time
by pressing
.
User Guide for the Kyocera Candid KX16 Phone
49
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Use keys 1–9 or
to
Return cursor to center
Previous screen
move the cursor around the
screen as indicated.
6. When finished, select
Options → Save. The image
is saved to My Pictures.
Saving a doodle
To move cursor away from drawing:
It is a good idea to save the doodle while you are
working on it. If you receive a call while creating
an unsaved doodle, it will be lost.
1. Select Options → Tools.
2. Select
, then Done.
•
Select Options → Save and press
The image will be saved in Menu →
Media Gallery → Images → Doodles.
.
3. Press a number key to move the cursor.
To erase part of drawing:
1. Select Options → Tools.
Resuming a doodle
2. Select
, then Done.
To return to another saved doodle:
3. Press a number key to move the eraser.
•
Select Menu → Tools & Games → Doodler →
Resume Doodle.
To Navigate: Use the following keys to doodle.
To:
Use:
Note: You can also go to Menu → Media
Gallery → Images → Doodles.
Select Options
Clear screen
Shortcut to Tools
Draw, erase, or move cursor/
shape UP
up
Draw, erase, or move cursor/
shape DOWN
Draw, erase, or move cursor/
shape LEFT
down
left
Draw, erase, or move cursor/
shape RIGHT
right
50
Tools & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
11 CONNECTING TO THE INTERNET
some Web menu options at the bottom of the
screen.
Using the Web Browser
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
–
–
A
appears in a secure session.
An underline and an arrow indicate that
there is more text. Press down to view
to return to the
more text. Press
previous screen.
Note: You cannot receive incoming calls while
you are using the Web Browser.
–
To choose a site, highlight it and press
Starting the Web Browser
1. Select Menu → Web Browser.
-or-
to select Go.
4. When you have finished using the Internet,
press to exit the browser.
Press and hold
left to launch the browser.
Using the Web menu options
A message about airtime fees appears every
time you start the browser.
The following options may appear on your screen:
•
•
•
•
Home returns you to the main Web Browser
window, or home page.
To cancel the message, see “Changing the Web
prompt” on page 52.
Mark Site saves the current location as a
bookmark for easy access.
For more information about how airtime is
charged, contact your service provider.
Bookmarks displays a list of your saved
Web sites.
2. Press
to continue.
If this is the first time you have connected to
the Internet, a message informs you that
security is not yet enabled for your
Web Browser.
Setup gives you options for changing how
information is displayed.
–
–
Show URL displays the entire URL.
About Openwave displays information
3. Press
to select Yes to enable security.
about your Web Browser version.
When you are connected, a browser home
page appears. It has a list of bookmarks and
User Guide for the Kyocera Candid KX16 Phone
51
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
–
Encryption should not be used unless you
are instructed to do so by your service
provider.
Changing the Web prompt
1. Select Menu → Settings → Convenience →
Web Prompt.
UP.Link selects a different browser server.
You can use this option if you have more
than one Web Browser account.
2. Highlight an option and press
to select
it:
–
–
–
–
At Start confirms that airtime fees will be
applied when you use the browser.
Restart restarts the Web Browser.
At End verifies you want to exit the
browser.
Searching for a Web site
How you search for a Web site depends on your
service provider. For more information, contact
your service provider.
Both prompts you when you start the
browser and exit the browser.
No Prompts does not use any prompts.
Going to a bookmarked site
1. Select Menu → Web Browser. If you see a
message prompt, press
to continue.
2. From your Web home page, select
Bookmarks. A list of bookmarks appears.
3. Enter the number corresponding to the
bookmark you want and press
.
Checking Net alerts
Alerts received from a Web site are sent to your
Net Alerts inbox.
1. Select Menu → Messages → Browser Alerts.
This action launches the browser inbox.
2. Press
to accept browser fees.
3. Select an alert and follow the prompts.
52
Connecting to the Internet
Download from Www.Somanuals.com. All Manuals Search And Download.
12 GETTING HELP
Mexico:
001-866-650-5103
Customer support
Your service provider’s customer support
New Zealand: 0-800-990-100
department may be accessible directly from your
phone when you dial a number such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available
to you, such as call forwarding or voicemail.
Panama:
Peru:
001-800-201-1984
0-800-51-934
Puerto Rico:
Venezuela:
1-866-664-6443
0-800-100-2640
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
For questions about the phone features, refer to
the materials provided with your phone, or visit
•
•
The name of your service provider.
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
The actual error message or problem you are
experiencing.
•
•
The steps you took to reproduce the problem.
The phone’s electronic serial number (ESN).
•
•
•
Web site: www.kyocera-wireless.com
Email: [email protected]
–
To locate the ESN select Menu → Phone
Info and scroll down to ESN: for the 11-
digit number.
Phone: 1-800-349-4478 (U.S. and Canada)
or 1-858-882-1401. Customer support
phone numbers are also available in the
following countries.
Argentina:
Australia:
Brazil:
0-800-666-0052
800-507-000
0-800-55-2362
800-43-1212
Chile:
Colombia:
India:
01-800-700-1546
Toll free:1-600-121214
Toll: 0124-284-5000
User Guide for the Kyocera Candid KX16 Phone
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Qualified service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
Phone accessories
To shop for Candid KX16 phone accessories, visit
www.kyocera-wireless.com/store. You may also
call us at (800) 349-4188 (U.S.A. only) or
(858) 882-1410.
Become a product evaluator
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including
cellular or PCS phones, visit beta.kyocera-
wireless.com.
54
Getting Help
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Numerics
1-touch dialing, 11
hands-free headset
purchasing, iv, 54
hard pause, 15
creating, 36
updating, 36
A
D
alarm clock, 7, 46
alerts
data/fax setup, 13, 41
digital mode, 7
display contrast, 38
doodler, 49
I
icons, 7
inbox, 27
for messages, 36
for missed calls, 10
analog mode, 7
auto text, 25
L
language, 37
lights
E
emergency
auto-hyphenation, 38
lights-only mode, 7, 34
calls, 12
B
limiting calls out, 40
lock code, 39
locking
emergency mode, 12
exit emergency mode, 12
position location, 7, 42
erasing
banner, 37
battery, 1
blocking outgoing calls, 40
Brick Attack, 48
phone, 39
contact entries, 40
text messages, 27
M
memory, saving, 27
menu view, 37
C
calculator, 46
call counters, 12
calls
F
fast find, 17
fax mode, 41
finding contact information, 16
flip
answering calls, 9
frequent contacts, 16
N
number mode, 21
answering, 8
O
missed, 9
outbox, 25
redialing, 8
camera
P
menu options, 19
sending a picture, 19
setting up, 20
taking a picture, 20
color themes, 39
com port speed, 41
contacts directory, 15
contrast, 38
phone numbers
editing, 16
G
games
verifying your own, 6
Brick Attack, 48
doodler, 49
race 21, 49
phone, unlocking, 39
position location, 7, 42
R
H
race 21, 49
recent call icons, 10
resetting the phone, iv
hands-free car kit
answering using voice, 32
purchasing, iv, 54
countdown timer, 47
custom menu
User Guide for the Kyocera Candid KX16 Phone
55
Download from Www.Somanuals.com. All Manuals Search And Download.
V
ringers
choosing types, 34
vibrate, 7, 34
voice answer, 32
voice dialing, 30
voice memo
erasing, 45
naming, 45
recording, 45
voicemail, 11
setting up, 6
volume
for roaming calls, 13
silencing, 6
volume, 35
roaming, 7
alerts, 13
controlling, 14
ringer, 13
S
saved phone numbers
editing, 16
scheduler, 45
screen contrast, 38
screen icons, 7, 21, 26, 34
screen savers, 38
secret contacts, 10
security, 39
earpiece, 9, 35
key beep, 35
ringer, 35
W
wallpaper, 39
web browser, 51
World Clock, 47
silent mode, 7, 34
speakerphone
turning off, 9
turning on, 9
stopwatch, 47
symbol mode, 22
T
technical support, 53
text entry, 21
quick reference, 23
text messages, 24
time format, 39
timer, 47
timing calls, 12
Tip Calculator, 46
TTY/TDD, 41
U
unlocking the phone, 40
56
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|