KRAMER ELECTRONICS LTD.
USER MANUAL
MODELS:
602T
Two-fiber Detachable Optical
DVI Transmitter
602R
Two-fiber Detachable Optical
DVI Receiver
P/N: 2900-000646 Rev 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Figures
602T, 602R – Contents
i
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer 602T Two-fiber Detachable Optical
DVI Transmitter and 602R Two-fiber Detachable Optical DVI Receiver, which are
ideal for the following typical applications:
•
Digital flat panel and plasma displays used in medical, commercial and travel
applications
•
•
•
Conference rooms and auditoriums
Kiosks with digital flat panel displays for presenting information
LED signboards in streets and stadiums
602T, 602R - Introduction
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Started
We recommend that you:
•
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•
•
Review the contents of this user manual
Use Kramer high-performance, high-resolution cables
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
i
2.1
Achieving the Best Performance
To achieve the best performance:
•
Use only good quality connection cables to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
•
•
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
•
Position your Kramer 602T, 602R away from moisture, excessive sunlight
and dust
Caution:
No operator serviceable parts inside the unit
!
Warning: Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning: Disconnect the power and unplug the unit from the wall
before installing
2
602T, 602R - Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Overview
The 602T and 602R are a small and lightweight fiber optic transmitter and receiver
pair for DVI signals. The 602T converts electrical signals to optical signals and the
602R decodes the optical signals back to electrical signals.
The 602T and 602R feature:
•
•
•
Max. Data Rate - 1.65Gbps
Max. Resolution - Up to WUXGA (1920x1200) @60Hz, 1080p
Range - Up to 500m (1650ft) (multimode); up to 1500m (5000ft) (single-
mode)
•
•
•
Cable - 2LC single or multi-mode fiber optic cable
EDID Capture - Copies and stores the EDID from a display device
Advanced Solution - Small and lightweight, indispensable asset in any digital
signage application
•
•
Standards Compliance - Supports DVI1.0 and DDC2B, fully implemented by
fiber-optic communication
Compliance with the limits for a Class A digital device, pursuant to part 15
and 2 of FCC and CE
•
•
•
Not HDCP Compliant
No EMI/RFI
Size - NanoTools
3.1
Powering the 602T and the 602R
Your 602T/602R pair comes with two 5V DC power adapters. The 602R must
always be powered via the external power adapter. The 602T can take power from
the external power adapter or from the 5V pin on the DVI card in the computer.
However, when using most laptops or a computer with an express graphic card,
an external power adapter is required. The 602T automatically detects if it is being
powered via the external power adapter, and if so, the internal power supply cuts
off.
602T, 602R - Overview
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2
Defining EDID
The Extended Display Identification Data (EDID) is a data-structure provided by a
display, to describe its capabilities to a graphics card (that is connected to the
display’s source). The EDID enables the computer to “know” what kind of monitor
is connected to the output. The EDID includes the manufacturer’s name, the
product type, the timing data supported by the display, the display size, luminance
data and (for digital displays only) the pixel mapping data.
EDID is defined by a standard published by the Video Electronics Standards
Association (VESA).
3.3
Your Two-fiber Detachable Optical DVI Transmitter/
Receiver
system:
Figure 1: 602 Two-fiber Detachable Optical DVI Transmitter and Receiver
4
602T, 602R - Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using the Two-fiber Detachable Optical DVI
System
This section describes how to:
•
•
•
4.1
Capturing the EDID
The 602T and 602R are connected via two channels that transmit R, G, B and
clock signals. The EDID of the display device is captured onto the transmitter for
the computer to read.
The factory default EDID is set to UXGA (1600x1200) at 60Hz vertical refresh rate.
If your display has this resolution, you do not need to capture the EDID.
You can capture the EDID of the display device on the 602T so that when the
computer connects to the 602T, it reads the virtual EDID information and identify
the display device. This procedure is performed only once for the connected
display device. After storing the EDID, the system can be connected and
disconnected without having to set the EDID again. If you decide to use a different
display, then you need to set the EDID again.
To capture the EDID of a display device, do the following:
1. Connect the power to the display.
2. Connect the 5V power adapter to the power socket of the 602T, and connect
the adapter to the mains electricity.
The EDID LED flashes twice and turns off.
4. Connect the 602T unit directly to the display device (while it is powered
ON).
602T, 602R - Using the Two-fiber Detachable Optical DVI System
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The EDID LED flashes several times while reading the EDID. The LED turns
OFF after about eight seconds.
5. Disconnect the transmitter from the display.
The LED lights
6. Disconnect the 602T.
The EDID information is now stored and the Indication LED is on.
Figure 2: The Auto EDID Button on the 602T
4.2
Connecting the Detachable Optical DVI
Transmitter/Receiver
To connect the 602T Two-fiber Detachable Optical DVI Transmitter with the 602R
do the following:
2. Connect the 602R to the 5V DC power adapter and connect the adapter to
the mains electricity. The blue LED lights.
3. Connect the duplex LC fiber cables to the 602T and 602R modules, one
Single-mode and multi-mode fiber are applicable up to 500 meters. For distances over
500 meters, use single-mode fibers.
4. Plug the 602T DVI connector directly to the DVI connector of the computer.
Do not use any intermediate cable or adapter between them, and connect cables 1 and
2 as indicated in Figure 3
5. Connect the 602R DVI connector directly to the DVI connector of the display
device.
6
602T, 602R - Using the Two-fiber Detachable Optical DVI System
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 3: Connecting the Fiber Optic Cables
6. Turn ON the Power on the computer and then on the display device.
7. If the transmitter does not power up, connect the 5V power adapter to the
602T transmitter, and connect the adapter to the mains electricity.
You can use the power supplied through a DVI pin from the graphic cards instead of
using the power adapter. After completing the installation, if the system does not seem
to work properly, reconnect the power adapter while the system is powered.
Figure 4: Connecting the 602T/602R Two-fiber Detachable Optical DVI Transmitter/Receiver
602T, 602R - Using the Two-fiber Detachable Optical DVI System
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3
Avoiding Pitfalls During Operation
If any of these problems occur, we recommend the following:
If the display device shows only a black screen:
•
Check that all the AC and DC plugs and jacks used by the external power
supplies are firmly connected
•
Check that the DVI ports are firmly plugged into the computer and the
display device, and be sure that the transmitter and receiver modules are
correctly plugged into the computer and display device, respectively
•
•
Check if the computer and display are powered ON and properly booted
Reset the system by unplugging and then replugging the transmitter DVI port
or receiver DVI port and then reboot the system
If the screen is distorted or displays noise:
•
•
•
•
•
Check if the graphics resolution is properly set
Go to the Display Properties of Windows and check the settings
Be sure that the resolution is set for WUXGA (1920 x 1200) at 60Hz, or lower
Reset the system
Disconnect and reconnect the optical DVI cables
Be sure that at all times the cables are stored and used away from
liquid or dirt.
i
8
602T, 602R - Using the Two-fiber Detachable Optical DVI System
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Technical Specifications
INPUTS:
DVI IN (602T), 2 LC optical connectors (602R)
OUTPUTS:
2 LC optical connectors (602T), DVI OUT (602R)
Up to WUXGA @60Hz (1.65Gbps)
5V DC, 570mA max. (602T); 570mA max. (602R)
0° to +50°C (32° to 122°F)
RESOLUTION:
POWER SOURCE:
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
HUMIDITY:
-30° to +70°C (-22° to 158°F)
10% to 85%, RHL non-condensing
3.9 cm x 6.9 cm x 1.5 cm (1.5" x 2.83" x 0.75") W, D, H
0.14kg (0.31lbs) approx.
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
2 power supplies
C-2LC/2LC 2 LC fiber optic cable
602T, 602R - Technical Specifications
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2º‡ÍÏ•âÍØ]Ïâ„ÏÍ®∏ñº‡≥]Ï®º∏ͺ∏ͺı‡ÍÀ‡ºÄıuÏ„Í]∏ÄÍ]ÍØ®„ÏͺñÍ;‡]≥â‡ÍÄ®„χ®kıϺ‡„|Í
˚®„®Ïͺı‡ÍV âkÍ„®Ïâ͸•â‡âÍıÀÄ]Ïâ„ÍϺÍÏ•®„Íı„â‡Í≥]∏ı]ØÍ≥]˛ÍkâÍñºı∏Ä–Í
V â͸âØuº≥âͲºı‡Í’ıâ„Ï®º∏„|Íuº≥≥â∏Ï„|Í]∏ÄÍñââÄk]uÆ–Í
V âkÍ„®Ïâ{͸¸¸–Ƈ]≥â‡âØâuχº∏®u„–uº≥
L 2,NXÍV K?5?3
+®„uº∏∏âuÏÍÏ•âÍı∏®ÏÍñ‡º≥ÍÏ•âÍÀº¸â‡
!
„ıÀÀØ˛Íkâñº‡âͺÀâ∏®∏ùÍ]∏ÄÍ„â‡˚®u®∏ù
2900- 000646
2
P/N:
Rev:
Download from Www.Somanuals.com. All Manuals Search And Download.
|