KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VP-1608
16x8 RGBHV/Balanced Audio
Matrix
P/N: 2900-001608 Rev 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
VP-1608 – Contents
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Figures
ii
VP-1608 - Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix
Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and
GROUP 11: Sierra Products.
Congratulations on purchasing your Kramer VP-1608 16x8 RGBHV/Balanced
Audio Matrix, which is ideal for the following typical applications:
•
•
Any professional system requiring outstanding value in a 16x8 matrix
Production and duplications facilities
VP-1608 - Introduction
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Started
We recommend that you:
•
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•
•
•
Review the contents of this user manual
Use Kramer high-performance, high-resolution cables
Use only the power cord that is supplied with this machine
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
i
2.1
Achieving the Best Performance
To achieve the best performance:
•
Use only good quality connection cables to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
•
•
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
•
Position your Kramer VP-1608 away from moisture, excessive sunlight and
dust
2
VP-1608 - Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Overview
The VP-1608 16x8 RGBHV/Balanced Audio Matrix is a true matrix switcher,
routing any input to any or all outputs. The VP-1608 includes 16 input and 8 output
selector buttons.
The unit features:
•
•
•
A bandwidth of 400MHz (fully loaded) for RGB signals
A unique vertical and horizontal sync-pulse solution
Audio-follow-video or audio breakaway option (to switch audio independently
from video)
•
•
15 preset memory locations for quick access to common configurations
A “TAKE” button for precise switch control, letting you place multiple switches
in a queue, and then activate them, with one touch of this button or a single
serial command
•
A delayed switching mode (ranging from 0 to 3.5sec in increments of
0.5sec), for clean transitions when switching between non-genlocked
sources
Control the VP-1608 using the front panel buttons, or remotely via:
•
RS-485 or RS-232 serial commands—that also support audio gain
adjustments for each input and output—transmitted by a touch screen
system, PC, or other serial controller
•
The Kramer RC-IR3 Infrared Remote Control Transmitter
The VP-1608 is dependable, rugged and fits into three vertical spaces (3U) of a
standard 19" rack.
3.1
Defining the VP-1608 16x8 RGBHV/Balanced Audio
Matrix
defines the switches on the underside.
VP-1608 - Overview
3
Download from Www.Somanuals.com. All Manuals Search And Download.
#
Feature
Function
1
2
3
IR Receiver
POWER Switch
The LED is illuminated when receiving signals from the Kramer Infra-red remote control transmitter
Illuminated switch supplying power to the unit
OUTPUT SELECTOR
Select the output to which the input is switched (from 1 to 8)
Buttons
4
5
INPUT SELECTOR Buttons
Select the input to switch to the output (from 1 to 16)
Use the INPUT SELECTOR buttons to store/recall the input/output configurations (refer to Section 7.4)
Pressing ALL followed by an INPUT button, connects that input to all outputs
For example, press ALL and then INPUT button # 2 to connect input # 2 to all the outputs
ALL Button
6
7
OFF Button
Pressing OFF after pressing an OUTPUT button disconnects that output from the inputs. To disconnect
all the outputs, press the ALL button and then the OFF button
TAKE Button
Pressing TAKE toggles the mode between the CONFIRM mode and the AT ONCE mode (user
confirmation per action is unnecessary)
8
9
VIDEO Button
When pressed actions relate to video
When pressed actions relate to audio
AUDIO Button
10 AFV Button
When pressed audio channels follow the video channels. The button is illuminated when the AFV mode
is selected
11 STO Button
Pressing STO (STORE) followed by an input button stores the current setup
12 RCL Button
Pressing the RCL (RECALL) button and the corresponding input button recalls a setup
After pressing the button, the stored status flashes. Pressing a different input button lets you view (only
view, nothing is implemented at this stage) another setup. After making your choice, pressing the RCL
button again implements the new status
13 LOCK Button
Pressing the LOCK button for more than 2 seconds, engages/disengages the front panel switches
14 INPUT STATUS 7-segment
Displays the selected input switched to the output (marked above each input)
Display
Also displays the number included in the product name and the firmware version number, as Section 7.8
describes
VP-1608 - Overview
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2: VP-1608 16x8 RGBHV/Balanced Audio Matrix Rear Panel
#
Feature
Function
15
16
17
18
RS-232 9-pin D-sub (F) Connector
Setup DIP-switches
RS-485 Connector
Connects to the PC or other Serial Controller
DIPS 1, 2, and 3 for setup of the Machine #; DIP 4 for RS-485 termination
RS-485 port on detachable terminal block
DELAY DIP-switches
DIP-switches for setup of the delay time ranging from 0sec to 3.5sec (in
increments of 0.5sec)
19
20
21
22
23
24
Power Connector with Fuse
AC connector enabling power supply to the unit
V (Vertical Sync) OUTPUT BNC Connectors
H (Horizontal Sync) OUTPUT BNC Connectors
B OUTPUT BNC Connectors
Connect to the RGBHV video acceptors (1 to 8)
For RGBS applications, one of the sync channels (H or V) may be used for the S
channel
G OUTPUT BNC Connectors
R OUTPUT BNC Connectors
6
VP-1608 - Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
#
Feature
R INPUT BNC Connectors
Function
25
26
27
28
29
30
31
G INPUT BNC Connectors
B INPUT BNC Connectors
Connect to the RGBHV video sources (1 to 16)
H (Horizontal Sync) INPUT BNC Connectors
V (Vertical Sync) INPUT BNC Connectors
AUDIO INPUTS Terminal Block Connectors
AUDIO OUT Terminal Block Connectors
Connect to the audio sources (from 1 to 16)
Connect to the audio acceptors (from 1 to 8)
Figure 3: VP-1608 Underside Flash Program Switches
#
Feature
Function
1
2
Flash Program Switch 1
Normal (factory default)
Flash Program Switch 2
(factory default)
VP-1608 - Overview
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Connecting a Single VP-1608
Always switch off the power to each device before connecting it to your
VP-1608. After connecting your VP-1608, connect its power and then
i
switch on the power to each device.
To connect a single VP-1608 16x8 RGBHV/Balanced Audio Matrix as illustrated in
1. Connect up to 16 RGBHV sources (such as RGBHV graphics sources) to
the RGBHV INPUT BNC connectors.
Not all sources or acceptors need to be connected.
2. Connect up to 8 RGBHV acceptors (such as RGBHV projectors) to the
RGBHV OUTPUT BNC connectors.
3. Connect up to 16 stereo audio sources to the AUDIO INPUT terminal block
4. Connect up to 8 stereo audio acceptors to the AUDIO OUTPUT terminal
5. Set the MACHINE # DIP-switches to MACHINE # 1, according to Figure 9,
6. Set the DELAY DIP-switches, if required (see Section 5.5).
7. Connect a PC or other controller, if required, via the RS-232 (see Section
8. Connect the power cord.
VP-1608 - Connecting a Single VP-1608
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1
Connecting a Balanced/Unbalanced Stereo Audio Input/Output
This section illustrates how to wire:
•
•
•
Figure 5: Balanced
Stereo Audio
Connection
Figure 6: Unbalanced
Stereo Audio Input
Connection
Figure 7: Unbalanced
Stereo Audio Output
Connection
5.2
Connecting to the VP-1608 via RS-232
You can connect to the VP-1608 via an RS-232 connection using, for example, a
PC. Note that a null-modem adapter/connection is not required.
To connect to the VP-1608 via RS-232:
•
Connect the RS-232 9-pin D-sub rear panel port on the VP-1608 unit via a
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5 need
to be connected) to the RS-232 9-pin D-sub port on your PC
5.3
Connecting a PC or Controller to the RS-485 Port
You can operate the VP-1608 via the RS-485 port from a distance of up to 1200m
(3900ft) using any device equipped with an RS-485 port (for example, a PC). For
successful communication, you must set the RS-485 machine number and bus
termination.
VP-1608 - Connecting a Single VP-1608
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect a device with a RS-485 port to the VP-1608:
•
•
•
Connect the A (+) pin on the RS-485 port of the PC to the A (+) pin on the
RS-485 port on the rear panel of the VP-1608
Connect the B (–) pin on the RS-485 port of the PC to the B (–) pin on the
RS-485 port on the rear panel of the VP-1608
Connect the G pin on the RS-485 port of the PC to the G pin on the RS-485
port on the rear panel of the VP-1608
5.4
Setting the MACHINE # DIP-Switches
The MACHINE # determines the address of a VP-1608 unit when several VP-1608
units are controlled by a PC or serial controller. Set the MACHINE # on a VP-1608
unit via DIPS 1, 2, and 3 (DIP 4 is for RS-485 termination), according to the
following table:
DIPS
2
MACHINE
#
1
OFF
OFF
OFF
OFF
ON
3
OFF
ON
1 Master
OFF
OFF
ON
2
3
4
5
6
7
8
OFF
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
OFF
ON
ON
ON
When using a stand-alone VP-1608 unit, set the MACHINE # to 1.
When connecting more than one VP-1608 unit, set the first machine (the Master)
connected via RS-232, as MACHINE # 1. The other VP-1608 slave units (each set
to a MACHINE # between 2 and 8) interconnect via their RS-485 ports to the
RS-485 port on the Master.
12
VP-1608 - Connecting a Single VP-1608
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5
Setting the DELAY DIP-Switches
To achieve clean transitions when switching between non-genlocked sources, set
the delay time—ranging from 0sec to 3.5sec in increments of 0.5sec—via the
DELAY DIP-switches, as shown in the following table. The VP-1608 unit is shipped
from the factory set with no delay (0sec).
Sec
DIP 1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
DIP 2
OFF
OFF
OFF
OFF
ON
DIP 3
OFF
OFF
ON
DIP 4
OFF
ON
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
OFF
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
OFF
ON
ON
ON
VP-1608 - Connecting a Single VP-1608
13
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Connecting Multiple VP-1608 Units
You can connect up to eight single VP-1608 units from a PC or serial controller via
6.1
Connecting via a PC or Serial Controller
To connect up to eight single VP-1608 units from a PC or serial controller via
Always switch off the power to each device before connecting it to your
VP-1608. After connecting your VP-1608, connect its power and then
i
switch on the power to each device.
1. Connect the video sources and acceptors, the appropriate audio sources
and acceptors, and the power cord to each VP-1608 unit.
2. On each VP-1608 unit, set the MACHINE # DIP-switches, as required (see
Set the first unit to MACHINE # 1 (Master), the second unit to MACHINE # 2, and so on
- up to MACHINE # 8 for the eighth unit.
3. Connect the RS-232 port on the first VP-1608 unit to the PC (see Section
4. Interconnect the RS-485 ports on all the VP-1608 units: from the
RS-485 port on the first VP-1608 unit, to the RS-485 port on the second
VP-1608 unit, and so on – up to the RS-485 port on the eighth VP-1608 unit.
14
VP-1608 - Connecting Multiple VP-1608 Units
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 8: Control Configuration via RS-232 and RS-485
6.2
Connecting via an RS-485 Controller
To connect up to seven single VP-1608 units via an RS-485 controller, for
example, a PC (equipped with an RS-485 interface), do the following:
Always switch off the power to each device before connecting it to your
VP-1608. After connecting your VP-1608, connect its power and then
i
switch on the power to each device.
1. Connect the video sources and acceptors, the appropriate audio sources
and acceptors, and the power cord to each VP-1608 unit.
VP-1608 - Connecting Multiple VP-1608 Units
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2. On each VP-1608 unit, set the MACHINE # DIP-switches, as required. For
example, set the first VP-1608 unit to MACHINE # 2, the second VP-1608
unit to MACHINE # 3, and so on, up to MACHINE # 8 for the seventh
3. Terminate the RS-485 line on both the PC and on the last VP-1608 unit (set
DIP 4 to ON).
4. Connect the RS-485 ports from the PC to the RS-485 ports on each of the
VP-1608 units, as follows:
.
.
.
Connect the “A” (+) PIN on the RS-485 PC port to the “A” (+) PIN on
the RS-485 rear panel ports of the VP-1608 units
Connect the “B” (-) PIN on the RS-485 PC port to the “B” (-) PIN on the
RS-485 rear panel ports of the VP-1608 units
If shielded twisted pair cable is used, the shield may be connected to
the “G” (Ground) PIN on one of the units
16
VP-1608 - Connecting Multiple VP-1608 Units
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Operating Your VP-1608 16x8
RGBHV/Balanced Audio Matrix
This section describes how to operate the VP-1608. The section includes:
•
•
•
•
•
•
•
•
7.1
Using the Audio-Follow-Video or Breakaway Option
By default, the VP-1608 is setup for use as a single machine. This means that it is
a 16x8 RGBHV/Balanced Audio Matrix (in audio-follow-video mode), with all
setups empty and each input connected to its corresponding output (for example,
input 1 to output 1). The DIP-switches are set up for a typical application using a
Figure 9: DIP-Switch Setup on a Single Machine
You can switch stereo audio signals in one of two ways, either:
•
Audio-follow-video (AFV), where audio and video channels switch together,
or
•
Breakaway, where audio and video channels switch independently
VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
17
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1.1
Setting the Audio-Follow-Video
To set the audio-follow-video (AFV) option, press the AFV button:
•
If the AUDIO and VIDEO configurations are the same, the AFV button
illuminates. The audio follows the video
•
If the AUDIO differs from the VIDEO, the TAKE and the AUDIO buttons
flash. Also, the audio outputs in the INPUT STATUS 7-segment display that
are changed, flash (warning that you are about to modify the audio
configuration for AFV operation). Press the TAKE button to confirm the
modification. The audio follows the video
7.1.2
Setting Breakaway
To set the breakaway option:
Press either the AUDIO (for audio control only) or the VIDEO (for video control
only) button:
•
•
If the AUDIO button illuminates, switching operations relate to audio
If the VIDEO button illuminates, switching operations relate to video
7.2
Switching OUT-IN Combinations
To switch a video/audio input to a video/audio output, do the following:
1. Press an OUTPUT SELECTOR button.
The corresponding input number in the INPUT STATUS 7-segment display
flashes.
2. Press an INPUT SELECTOR button.
The selected input switches to the selected output.
For example, press the ALL button and then INPUT SELECTOR button # 2 to
connect input # 2 to all the outputs.
18
VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3
Confirming Settings
Choose to work in the AT ONCE or the CONFIRM mode, as explained in Section
combination implements the switch immediately. In the CONFIRM mode, the
TAKE button must be pressed to authorize the switch.
In the AT ONCE mode, you save time as execution is immediate and actions
require no user confirmation. However, no protection is offered against changing
an action in error.
In the CONFIRM mode:
•
•
•
You can key-in several actions and then confirm them by pressing the TAKE
button, to simultaneously activate the multiple switches
Every action requires user confirmation, to protect against erroneous
switching
Execution is delayed until the user confirms the action
Failure to press the TAKE button within one minute (the timeout) aborts the action.
7.3.1
Toggling between the AT ONCE and CONFIRM Modes
To toggle between the AT ONCE and CONFIRM modes, do the following:
1. Press the TAKE button to toggle from the AT ONCE mode (the TAKE button
does not illuminate) to the CONFIRM mode (the TAKE button illuminates).
The TAKE button illuminates and actions now require user confirmation.
2. Press the illuminated TAKE button to toggle from the CONFIRM mode back
to the AT ONCE mode.
The TAKE button turns off and actions no longer require user confirmation.
VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3.2
Confirming a Switching Action
To confirm a switching action (in CONFIRM mode), do the following:
1. Press an OUT-IN combination.
The corresponding input number that is displayed in the INPUT STATUS
7-segment display flashes. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm the action.
The corresponding input number that is displayed in the INPUT STATUS
7-segment display no longer flashes. The TAKE button illuminates.
To confirm several actions (in CONFIRM mode), do the following:
1. Press each OUT-IN combination in sequence.
The corresponding input numbers that are displayed in the INPUT STATUS
7-segment display blink. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm all the actions.
The corresponding input numbers that are displayed in the INPUT STATUS
7-segment display no longer blink. The TAKE button illuminates.
7.4
Storing/Recalling Input/Output Configurations
You can store and recall up to 15 input/output configurations (or presets) in
non-volatile memory, using the INPUT SELECTOR buttons 1 to 15. The 15
input/output configurations also include the relevant audio-follow-video/breakaway
option definition, the video configurations, the audio configurations, the audio gain
level for each of the 16 inputs, and the audio gain level for each of the eight
outputs.
7.4.1
Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button flashes.
20
VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press one of the INPUT SELECTOR buttons from 1 to 15 (this becomes the
setup # in which the current status is stored). If in the CONFIRM mode,
press the flashing TAKE button to confirm the action.
The memory stores the data at that reference.
7.4.2
Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button flashes.
2. Press the appropriate INPUT SELECTOR button (the INPUT SELECTOR
button # corresponding to the setup #). If in the CONFIRM mode, the setup
flashes on the display and is only implemented after pressing the TAKE
button.
The memory recalls the stored data from that reference.
To view the saved input/output configurations, set the VP-1608 to the CONFIRM
mode and manually scan all the input/output configurations.
Press RCL followed by an INPUT SELECTOR button to display a configuration. To recall this
configuration, press TAKE to select it. If not, repeat the above to display another configuration.
7.4.3
Deleting an Input/Output Configuration
To delete an input/output configuration, do the following:
1. Press the STO and RCL buttons simultaneously.
Both the STO and RCL buttons blink.
2. Press the appropriate INPUT SELECTOR button.
This erases that specific input/output configuration from the memory, leaving
it empty and available.
Storing a new configuration over a previous configuration (without deleting it first)
replaces the previous configuration.
VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
21
Download from Www.Somanuals.com. All Manuals Search And Download.
7.5
7.6
Adjusting the Audio Gain Control
You can adjust the gain control for each input and output signal using the latest
K-Router Windows®-based control software (provided). See the Hex Tables for
Locking and Unlocking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via the
front panel buttons, lock your VP-1608. Unlocking releases the protection
mechanism.
Nevertheless, even though the front panel is locked you can still operate via RS-232 or
RS-485 serial (remote controller or PC), as well as via the Kramer RC-IR3 Infrared Remote
Control Transmitter.
To lock the VP-1608:
•
Press the LOCK button for more than two seconds
The front panel is locked and the LOCK button flashes
To unlock the VP-1608:
•
Press the LOCK button for more than two seconds
The front panel unlocks and the LOCK button no longer flashes
7.7
Resetting the VP-1608 16x8 RGBHV/Balanced Audio
Matrix
You can reset the VP-1608 unit to the:
•
Current status (“soft reset”) (reloads the current setup without having to
switch the power off and on)
•
Factory default (resets to the pre-installed factory default state)
Each VP-1608 unit ships in its factory default state that is a 16x8 RGBHV/Balanced
Audio Matrix (in audio-follow-video mode), with all setups empty and each input
connected to its corresponding output (for example, 1-to-1).
22
VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
Download from Www.Somanuals.com. All Manuals Search And Download.
7.7.1
Resetting to the Current Status
You can reset the VP-1608 unit to the current status (reloads the current setup)
To reset a VP-1608 unit to the current status, do the following:
•
Press INPUT buttons 1 and 5 simultaneously for 3 seconds
The VP-1608 unit resets to the current status, momentarily displaying the
characteristics also appear immediately (and automatically) after switching
on the power
7.7.2
Resetting to the Factory Default State
You can reset the VP-1608 unit to the factory default state.
To reset a VP-1608 unit to the factory default state, do the following:
•
Press OUTPUT buttons 1 and 5 simultaneously for 3 seconds
The VP-1608 unit resets to its factory default state, momentarily displaying
7.8
Displaying Unit Characteristics
•
•
The number included in the product name (for example, 1608)
The firmware version number
Figure 10: VP-1608 Unit Characteristics
VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
23
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Flash Memory Upgrade
The VP-1608 firmware is located in FLASH memory, which lets you upgrade to the
latest Kramer firmware version in minutes! The process involves:
•
•
•
8.1
Downloading from the Internet
To download the up-to-date file from the Internet:
file: “FLIP_VP1608.zip” from the Technical Support section.
2. Extract the file: “FLIP_VP1608.zip” to a folder (for example, C:\Program
Files\Kramer Flash).
3. Create a shortcut on your desktop to the file: “FLIP.EXE”.
8.2
Connecting the PC to the RS-232 Port
Before installing the latest Kramer firmware version on a VP-1608 unit, do the
following:
1. Connect the RS-232 9-pin D-sub (F) rear panel port on the VP-1608 to the
flat cable.
2. Connect the power on the VP-1608 unit and switch it ON.
3. Set the underside Flash Program switches (see Figure 11), as follows:
.
.
.
Set Flash Program switch 1 to Program
Set Flash Program switch 2 to Reset
Set Flash Program switch 2 to Normal
24
VP-1608 - Flash Memory Upgrade
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 11: VP-1608 Underside Flash Program Switches Set for Upgrade
Upgrading the Firmware
8.3
To upgrade the firmware, follow these steps:
1. Double-click the desktop icon: “Shortcut to FLIP.EXE”.
The Splash screen appears as follows:
Figure 12: Splash Screen
2. After a few seconds, the Splash screen is replaced by the “Atmel – Flip”
window:
VP-1608 - Flash Memory Upgrade
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 13: Atmel – Flip Window
3. Press the keyboard shortcut key F2 (or select the “Select” command from
the Device menu, or press the integrated circuit icon in the upper right corner
of the window).
The “Device Selection” window appears:
Figure 14: Device Selection Window
4. Click the button next to the name of the device and select from the list:
AT89C51RD2.
26
VP-1608 - Flash Memory Upgrade
Download from Www.Somanuals.com. All Manuals Search And Download.
6. The Open File window opens. Select the correct HEX file that contains the
updated version of the firmware for the VP-1608 (for example
1608M_V1p2.hex) and click Open.
7. Press the keyboard shortcut key F3 (or select the “Communication/RS232”
command from the Settings menu, or press the keys: Alt- SCR).
The “RS232” window appears. Change the COM port according to the
configuration of your computer and select the 9600 baud rate:
Figure 17: RS-232 Window
8. Click Connect.
In the “Atmel – Flip” window, in the Operations Flow column, the Run button
is active, and the name of the chip appears as the name of the third column:
AT89C51RD2.
Verify that in the Buffer Information column, the “HEX File: VP1608.hex”
appears.
Figure 18: Atmel – Flip Window (Connected)
28
VP-1608 - Flash Memory Upgrade
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Click Run. After each stage of the operation is completed, the check-box for
that stage becomes colored green (see also the blue progress indicator on
the status bar).
When the operation is completed, all 4 check-boxes are colored green and
the status bar message: Memory Verify Pass appears:
If an error message: “Not Finished” shows, click Run again.
Figure 19: Atmel – Flip Window (Operation Completed)
10. Close the “Atmel – Flip” window.
11. Disconnect the power on the VP-1608.
12. Set both the underside switches: Flash Program switch 1 and Flash Program
13. Connect the power on the VP-1608.
Upon initialization, the new VP-1608 software version shows in the INPUT
STATUS 7-segment Display.
VP-1608 - Flash Memory Upgrade
29
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Technical Specifications
INPUTS:
16 x 3 video (RGB) 0.7Vpp/75Ω on BNC connectors.
16 x 2 H&V, TTL level on BNC connectors
16 balanced audio stereo on detachable terminal blocks
OUTPUTS:
8 x 3 video (RGB) 0.7Vpp/75Ω on BNC connectors
8 x 2 H&V, TTL level/75Ω on BNC connectors
8 balanced audio stereo on detachable terminal blocks
VIDEO BANDWIDTH (-3dB):
AUDIO BANDWIDTH (-3dB):
VIDEO S/N RATIO:
400MHz
30kHz
71.7dB
AUDIO S/N RATIO:
74.5dB unweighted (1Vpp)
-62.5dB @5MHz
VIDEO CROSSTALK:
CONTROL:
Front panel switches and IR. RS-232 and RS-485 may
also control input and output audio levels
AUDIO CONTROL:
Mute, -46dB to +10dB gain range, via RS-232, RS-485,
IR
AUDIO THD:
0.028% (1kHz)
POWER SOURCE:
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
HUMIDITY:
230V AC, 50/60Hz (115V AC, USA), 28VA
0° to +55°C (32° to 131°F)
-45° to +72°C (-49° to 162°F)
10% to 90%, RHL non-condensing
19" x 7" x 3U W, D, H, rack mountable
5.5kg, (12.2lbs) approx.
DIMENSIONS:
WEIGHT:
ACCESSORIES:
Power cord, Windows®-based Kramer control software, IR
remote control
30
VP-1608 - Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Table of Hex Codes for Serial
Communication
This table lists the hex values for switching a single machine (MACHINE # 1) via
RS-232/RS-485 in breakaway mode:
Switching Video Channels
Switching Audio Channels
OUT
IN 1
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
01
81
81
81
01
81
82
81
01
81
83
81
01
81
84
81
01
81
85
81
01
81
86
81
01
81
87
81
01
81
88
81
02
81
81
81
02
81
82
81
02
81
83
81
02
81
84
81
02
81
85
81
02
81
86
81
02
81
87
81
02
81
88
81
01
82
81
81
01
82
82
81
01
82
83
81
01
82
84
81
01
82
85
81
01
82
86
81
01
82
87
81
01
82
88
81
02
82
81
81
02
82
82
81
02
82
83
81
02
82
84
81
02
82
85
81
02
82
86
81
02
82
87
81
02
82
88
81
IN 2
01
83
81
81
01
84
81
81
01
83
82
81
01
84
82
81
01
83
83
81
01
84
83
81
01
83
84
81
01
84
84
81
01
83
85
81
01
84
85
81
01
83
86
81
01
84
86
81
01
83
87
81
01
84
87
81
01
83
88
81
01
84
88
81
02
83
81
81
02
84
81
81
02
83
82
81
02
84
82
81
02
83
83
81
02
84
83
81
02
83
84
81
02
84
84
81
02
83
85
81
02
84
85
81
02
83
86
81
02
84
86
81
02
83
87
81
02
84
87
81
02
83
88
81
02
84
88
81
IN 3
IN 4
01
85
81
81
01
85
82
81
01
85
83
81
01
85
84
81
01
85
85
81
01
85
86
81
01
85
87
81
01
85
88
81
02
85
81
81
02
85
82
81
02
85
83
81
02
85
84
81
02
85
85
81
02
85
86
81
02
85
87
81
02
85
88
81
IN 5
01
86
81
81
01
86
82
81
01
86
83
81
01
86
84
81
01
86
81
81
01
86
82
81
01
86
83
81
01
86
84
81
02
86
81
81
02
86
82
81
02
86
83
81
02
86
84
81
02
86
81
81
02
86
82
81
02
86
83
81
02
86
84
81
IN 6
01
87
81
81
01
87
82
81
01
87
83
81
01
87
84
81
01
87
85
81
01
87
86
81
01
87
87
81
01
87
88
81
02
87
81
81
02
87
82
81
02
87
83
81
02
87
84
81
02
87
85
81
02
87
86
81
02
87
87
81
02
87
88
81
IN 7
01
88
81
81
01
89
81
81
01
01
88
82
81
01
89
82
81
01
01
88
83
81
01
89
83
81
01
01
88
84
81
01
89
84
81
01
01
88
85
81
01
89
85
81
01
01
88
86
81
01
89
86
81
01
01
88
87
81
01
89
87
81
01
01
88
88
81
01
89
88
81
01
02
88
81
81
02
89
81
81
02
02
88
82
81
02
89
82
81
02
02
88
83
81
02
89
83
81
02
02
88
84
81
02
89
84
81
02
02
88
85
81
02
89
85
81
02
02
88
86
81
02
89
86
81
02
02
88
87
81
02
89
87
81
02
02
88
88
81
02
89
88
81
02
IN 8
IN 9
IN 10
IN 11
IN 12
IN 13
IN 14
8A 8A 8A 8A 8A 8A 8A 8A 8A 8A 8A 8A 8A 8A 8A 8A
81
81
01
82
81
01
83
81
01
84
81
01
85
81
01
86
81
01
87
81
01
88
81
01
81
81
02
82
81
02
83
81
02
84
81
02
85
81
02
86
81
02
87
81
02
88
81
02
8B 8B 8B 8B 8B 8B 8B 8B 8B 8B 8B 8B 8B 8B 8B 8B
81
81
01
82
81
01
83
81
01
84
81
01
85
81
01
86
81
01
87
81
01
88
81
01
81
81
02
82
81
02
83
81
02
84
81
02
85
81
02
86
81
02
87
81
02
88
81
02
8C 8C 8C 8C 8C 8C 8C 8C 8C 8C 8C 8C 8C 8C 8C 8C
81
81
01
82
81
01
83
81
01
84
81
01
85
81
01
86
81
01
87
81
01
88
81
01
81
81
02
82
81
02
83
81
02
84
81
02
85
81
02
86
81
02
87
81
02
88
81
02
8D 8D 8D 8D 8D 8D 8D 8D 8D 8D 8D 8D 8D 8D 8D 8D
81
81
01
82
81
01
83
81
01
84
81
01
85
81
01
86
81
01
87
81
01
88
81
01
81
81
02
82
81
02
83
81
02
84
81
02
85
81
02
86
81
02
87
81
02
88
81
02
8E 8E 8E 8E 8E 8E 8E 8E 8E 8E 8E 8E 8E 8E 8E 8E
81
82
83
84
85
86
87
88
81
82
83
84
85
86
87
88
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
VP-1608 - Table of Hex Codes for Serial Communication
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Video Channels
Switching Audio Channels
OUT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
01
01
01
01
01
01
01
01
02
02
02
02
02
02
02
02
IN 15
8F 8F 8F 8F 8F 8F 8F 8F 8F 8F 8F 8F 8F 8F 8F 8F
81
81
82
81
83
81
84
81
85
81
86
81
87
81
88
81
81
81
82
81
83
81
84
81
85
81
86
81
87
81
88
81
01
90
81
81
01
90
82
81
01
90
83
81
01
90
84
81
01
90
85
81
01
90
86
81
01
90
87
81
01
90
88
81
02
90
81
81
02
90
82
81
02
90
83
81
02
90
84
81
02
90
85
81
02
90
86
81
02
90
87
81
02
90
88
81
IN 16
32
VP-1608 - Table of Hex Codes for Serial Communication
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Hex Tables for Audio Input/Output Gain
Control
gain control adjustment, respectively.
11.1 Hex Tables for Audio Input Gain Control
Before adjusting the audio inputs gain, instruction 42, the AUDIO PARAMETER
SETTINGS FOR INSTRUCTIONS 22, 24, 25 is sent. This command is sent once,
and the “audio inputs gain adjustment” mode continues until instruction 42
changes to the “audio outputs gain adjustment” mode:
2A
86
80
81
The next table lists the hex values for the audio gain control of the 16 inputs:
VP-1608 - Hex Tables for Audio Input/Output Gain Control
33
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUTS
1
2
3
4
5
6
7
8
9
10
16
11
16
12
16
13
16
14
16
15
16
16
16
ALL
16
16
81
80
81
16
82
80
81
16
83
80
81
16
84
80
81
16
85
80
81
16
86
80
81
16
87
80
81
16
88
80
81
16
89
80
81
8A
80
81
8B
80
81
8C
80
81
8D
80
81
8E
80
81
8F
80
81
90
80
81
80
80
81
16
81
81
81
16
82
81
81
16
83
81
81
16
84
81
81
16
85
81
81
16
86
81
81
16
87
81
81
16
88
81
81
16
89
81
81
16
8A
81
81
16
8B
81
81
16
8C
81
81
16
8D
81
81
16
8E
81
81
16
8F
81
81
16
90
81
81
16
80
81
81
16
81
8A
81
16
82
8A
81
16
83
8A
81
16
84
8A
81
16
85
8A
81
16
86
8A
81
16
87
8A
81
16
88
8A
81
16
89
8A
81
16
8A
8A
81
16
8B
8A
81
16
8C
8A
81
16
8D
8A
81
16
8E
8A
81
16
8F
8A
81
16
90
8A
81
16
80
8A
81
16
81
FF
81
16
82
FF
81
16
83
FF
81
16
84
FF
81
16
85
FF
81
16
86
FF
81
16
87
FF
81
16
88
FF
81
16
89
FF
81
16
8A
FF
81
16
8B
FF
81
16
8C
FF
81
16
8D
FF
81
16
8E
FF
81
16
8F
FF
81
16
90
FF
81
16
80
FF
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
16
81
80
81
16
82
80
81
16
83
80
81
16
84
80
81
16
85
80
81
16
86
80
81
16
87
80
81
16
88
80
81
16
89
80
81
16
8A
80
81
16
8B
80
81
16
8C
80
81
16
8D
80
81
16
8E
80
81
16
8F
80
81
16
90
80
81
16
80
80
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
16
81
D8
81
16
82
D8
81
16
83
D8
81
16
84
D8
81
16
85
D8
81
16
86
D8
81
16
87
D8
81
16
88
D8
81
16
89
D8
81
16
8A
D8
81
16
8B
D8
81
16
8C
D8
81
16
8D
D8
81
16
8E
D8
81
16
8F
D8
81
16
90
D8
81
16
80
D8
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
16
81
FF
81
16
82
FF
81
16
83
FF
81
16
84
FF
81
16
85
FF
81
16
86
FF
81
16
87
FF
81
16
88
FF
81
16
89
FF
81
16
8A
FF
81
16
8B
FF
81
16
8C
FF
81
16
8D
FF
81
16
8E
FF
81
16
8F
FF
81
16
90
FF
81
16
80
FF
81
34
VP-1608 - Hex Tables for Audio Input/Output Gain Control
Download from Www.Somanuals.com. All Manuals Search And Download.
11.2 Hex Tables for Audio Output Gain Control
Before adjusting the audio outputs gain, instruction 42, the AUDIO PARAMETER
SETTINGS FOR INSTRUCTIONS 22, 24, 25 is sent. The command sends once,
and the “audio outputs gain adjustment” mode continues until instruction 42
changes to the “audio inputs gain adjustment” mode:
2A
87
80
81
The next table lists the hex values for the audio gain control of the eight outputs:
VP-1608 - Hex Tables for Audio Input/Output Gain Control
35
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTPUTS
1
16
81
80
81
2
16
82
80
81
3
16
83
80
81
4
16
84
80
81
5
16
85
80
81
6
7
16
87
80
81
8
16
88
80
81
ALL
16
16
86
80
81
80
80
81
*In the Mute state, the
audio output is
physically disconnected
from the input
16
81
81
81
16
82
81
81
16
83
81
81
16
84
81
81
16
85
81
81
16
86
81
81
16
87
81
81
16
88
81
81
16
80
81
81
16
81
16
82
16
83
8A
81
16
84
16
85
16
86
8A
81
16
87
8A
81
16
88
16
80
8A 8A
8A 8A
8A 8A
81
81
81
81
81
81
16
81
16
82
16
83
FF
81
16
84
16
85
16
86
FF
81
16
87
FF
81
16
88
16
80
FF FF
FF FF
FF FF
81
81
81
81
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
16
81
80
81
16
82
80
81
16
83
80
81
16
84
80
81
16
85
80
81
16
86
80
81
16
87
80
81
16
88
80
81
16
80
80
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
16
81
16
82
16
83
16
84
16
85
16
86
16
87
16
88
16
80
D8 D8 D8 D8 D8 D8 D8 D8 D8
81
81
81
81
81
81
81
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
3F
80
81
81
16
81
16
82
16
83
FF
81
16
84
16
85
16
86
FF
81
16
87
FF
81
16
88
16
80
FF FF
81 81
FF FF
81 81
FF FF
81 81
36
VP-1608 - Hex Tables for Audio Input/Output Gain Control
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Kramer Protocol 2000
The Kramer Protocol 2-000 RS-232/RS-485 communication uses four bytes of
information as defined below.
MSB
LSB
DESTINATION
INSTRUCTION
0
7
D
6
N5
5
N4
4
N3
3
N2
2
N1
1
N0
0
1st byte
INPUT
1
7
I6
6
I5
5
I4
4
I3
3
I2
2
I1
1
I0
0
2nd byte
OUTPUT
1
7
O6
6
O5
5
O4
4
O3
3
O2
2
O1
1
O0
0
3rd byte
MACHINE NUMBER
1
7
OVR
6
X
5
M4
4
M3
3
M2
2
M1
1
M0
0
4th byte
1st BYTE:
Bit 7 – Defined as 0.
D – “DESTINATION”:
0 - for sending information to the switchers (from the PC);
1 - for sending to the PC (from the switcher).
N5…N0 – “INSTRUCTION”
The function that is to be performed by the switcher(s) is defined by the INSTRUCTION (6 bits). Similarly, if a function is
performed via the machine’s keyboard, then these bits are set with the INSTRUCTION NO., which was performed. The
instruction codes are defined according to the table below (INSTRUCTION NO. is the value to be set for N5…N0).
2nd BYTE:
Bit 7 – Defined as 1.
I6…I0 – “INPUT”.
When switching (ie. instruction codes 1 and 2), the INPUT (7 bits) is set as the input number which is to be switched.
Similarly, if switching is done via the machine’s front-panel, then these bits are set with the INPUT NUMBER which was
switched. For other operations, these bits are defined according to the table.
3rd BYTE:
Bit 7 – Defined as 1.
O6…O0 – “OUTPUT”.
When switching (ie. instruction codes 1 and 2), the OUTPUT (7 bits) is set as the output number which is to be switched.
Similarly, if switching is done via the machine’s front-panel, then these bits are set with the OUTPUT NUMBER which
was switched. For other operations, these bits are defined according to the table.
4th BYTE:
Bit 7 – Defined as 1.
Bit 5 – Don’t care.
OVR – Machine number override.
M4…M0 – MACHINE NUMBER.
Used to address machines in a system via their machine numbers. When several machines are controlled from a single
serial port, they are usually configured together with each machine having an individual machine number. If the OVR bit
is set, then all machine numbers accept (implement) the command, and the addressed machine replies. For a single
machine controlled via the serial port, always set M4…M0 = 1, and make sure that the machine itself is configured as
MACHINE NUMBER = 1.
All the values in the table are decimal, unless otherwise stated
i
VP-1608 - Kramer Protocol 2000
37
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTION
DESCRIPTION
DEFINITION FOR SPECIFIC INSTRUCTION
INPUT OUTPUT
NOTE
#
0
RESET VIDEO
0
0
1
1
2
3
SWITCH VIDEO
Set equal to video input which is
to be switched
(0 = disconnect)
Set equal to audio input which is
to be switched
(0 = disconnect)
Set equal to video output which is to be
switched
(0 = to all the outputs)
Set equal to audio output which is to be
switched
(0 = to all the outputs)
0 - to store
2, 15
SWITCH AUDIO
2
STORE VIDEO STATUS
Set as SETUP #
2, 3, 15
1 - to delete
4
5
RECALL VIDEO STATUS Set as SETUP #
REQUEST STATUS OF A Set as SETUP #
VIDEO OUTPUT
0
2, 3, 15
4, 3
Equal to output number whose status is
reqd
6
8
REQUEST STATUS OF
AN AUDIO OUTPUT
BREAKAWAY SETTING
Set as SETUP #
Equal to output number whose status is
reqd
0 - audio-follow-video
1 - audio breakaway
0 - FOLLOW mode
1 - Normal mode
4, 3
2
0
1
15
11 REQUEST BREAKAWAY
SETTING
Set as SETUP #, or set to 126 or 0 - Request audio breakaway setting
127 to request if machine has this 1 - Request “FOLLOW” setting
function
3, 4, 6,
15
12 REQUEST VIDEO/AUDIO Set as SETUP #, or set to 126 or 0 - for video
3, 4, 6
TYPE SETTING
127 to request if machine has this 1 - for audio
function
2 - for VGA
15 REQUEST WHETHER
SETUP IS DEFINED
16 ERROR/BUSY
Set as SETUP #
0
8
9
0
0 - error
1 - invalid instruction
2 - out of range
3 - machine busy
- - - -
17 RESERVED
18 RESET AUDIO
- - - -
0
10
1
0
19 STORE AUDIO STATUS
Set as SETUP #
0 - to store
1 - to delete
0
2, 3
20 RECALL AUDIO STATUS Set as SETUP #
22 SET AUDIO PARAMETER Equal to input/output number
whose gain is to be set (0 = all)
2, 3
2, 11, 23
Set as parameter value
24 INCREASE/DECREASE
AUDIO PARAMETER
Equal to input/output number
whose parameter is to be
increased/decreased (0 = all)
0 - increase output
1 - decrease output
2 - increase left output
3 - decrease left output
4 - increase right output
5 - decrease right output
6 - increase input
23
7 - decrease input
8 - increase left input
9 - decrease left input
10 - increase right input
11 - decrease right input
0
25 REQUEST AUDIO
PARAMETER
30 LOCK FRONT PANEL
Equal to input/output number
whose parameter is requested
0 - Panel unlocked
1 - Panel locked
6, 23
2
0
0
31 REQUEST WHETHER
PANEL IS LOCKED
0
16
42 AUDIO PARAMETER
SETTINGS FOR
INSTRUCTIONS 22, 24, 25 I1 - Left
I2 - Right
57 SET AUTO-SAVE
INPUT Bit:
I0 - 0=input; 1=output
0 - Gain
1 - Bass
2 - Treble
3 - Midrange
0
23
I3 - no save
12, 2
I4 - auto-save
38
VP-1608 - Kramer Protocol 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTION
DESCRIPTION
DEFINITION FOR SPECIFIC INSTRUCTION
OUTPUT
NOTE
#
INPUT
Set equal to video input
(0 = disconnect)
59 LOAD VIDEO DATA
Set equal to video output
(0 = to all the outputs)
21, 22
(127 = load SETUP #)
or SETUP #
60 LOAD AUDIO DATA
61 IDENTIFY MACHINE
Set equal to audio input
(0 = disconnect)
(127 = load SETUP #)
Set equal to audio output
(0 = to all the outputs)
or SETUP #
21, 22
13
1 - video machine name
2 - audio machine name
3 - video software version
4 - audio software version
5 - RS422 controller name
6 - RS422 controller version
7 - remote control name
8 - remote software version
9 - Protocol 2000 revision
1 - number of inputs
0 - Request first 4 digits
1 - Request first suffix
2 - Request second suffix
3 - Request third suffix
10 - Request first prefix
11 - Request second prefix
12 - Request third prefix
62 DEFINE MACHINE
63 EXTENDED DATA
1 - for video
2 - for audio
3 - for SDI
4 - for remote panel
5 - for RS-422 controller
7 MSBs for OUTPUT data
14
19
2 - number of outputs
3 - number of setups
7 MSBs for INPUT data
NOTES on the above table:
NOTE 1 - When the master switcher is reset, (e.g. when it is turned on), the reset code is sent to the PC. If this code is
sent to the switchers, it resets according to the present power-down settings.
NOTE 2 - These are bi-directional definitions. That is, if the switcher receives the code, it performs the instruction; and if
the instruction is performed (due to a keystroke operation on the front panel), then these codes are sent. For example, if
the HEX code
01
85
88
83
was sent from the PC, then the switcher (machine 3) switches input 5 to output 8. If the user switched input 1 to output 7
via the front panel keypad, then the switcher sends HEX codes:
41
81
87
83
to the PC.
When the PC sends one of the commands in this group to the switcher, then, if the instruction is valid, the switcher
replies by sending to the PC the same four bytes that it was sent (except for the first byte, where the DESTINATION bit
is set high).
NOTE 3 - SETUP # 0 is the present setting. SETUP # 1 and higher are the settings saved in the switcher's memory, (i.e.
those used for Store and Recall).
NOTE 4 - The reply to a "REQUEST" instruction is as follows: the same instruction and INPUT codes as were sent are
returned, and the OUTPUT is assigned the value of the requested parameter. The replies to instructions 10 and 11 are
as per the definitions in instructions 7 and 8 respectively. For example, if the present status of machine number 5 is
breakaway setting, then the reply to the HEX code
0B
would be HEX codes
4B 80
80
80
85
81
85
NOTE 6 – If INPUT is set to 127 for these instructions, then, if the function is defined on this machine, it replies with
OUTPUT=1. If the function is not defined, then the machine replies with OUTPUT=0, or with an error (invalid instruction
code).
If the INPUT is set to 126 for these instructions, then, if possible, the machine returns the current setting of this function,
even for the case that the function is not defined. For example, for a video switcher which always switches during the
VIS of input #1, (and its VIS setting cannot be programmed otherwise), the reply to the HEX code
0A
would be HEX codes
4A FE
FE
80
81 (i.e. request VIS setting, with INPUT set as 126dec)
81
81 (i.e. VIS setting = 1, which is defined as VIS from input #1).
NOTE 8 - The reply to the "REQUEST WHETHER SETUP IS DEFINED" is as in TYPE 3 above, except that here the
OUTPUT is assigned with the value 0 if the setup is not defined; or 1 if it is defined.
NOTE 9 - An error code is returned to the PC if an invalid instruction code was sent to the switcher, or if a parameter
associated with the instruction is out of range (e.g. trying to save to a setup greater than the highest one, or trying to
switch an input or output greater than the highest one defined). This code is also returned to the PC if an RS-232
instruction is sent while the machine is being programmed via the front panel. Reception of this code by the switcher is
not valid.
NOTE 11 – For machines where the video and/or audio gain is programmable.
VP-1608 - Kramer Protocol 2000
39
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE 12 - Under normal conditions, the machine's present status is saved each time a change is made. The "power-
down" save (auto-save) may be disabled using this code. Note that whenever the machine is turned on, the auto-save
function is set.
NOTE 13 - This is a request to identify the switcher/s in the system. If the OUTPUT is set as 0, and the INPUT is set as
1, 2, 5 or 7, the machine sends its name. The reply is the decimal value of the INPUT and OUTPUT. For example, for a
2216, the reply to the request to send the audio machine name would be (HEX codes):
7D
96
90
81 (i.e. 128dec+ 22dec for 2nd byte, and 128dec+ 16dec for
3rd byte).
If the request for identification is sent with the INPUT set as 3 or 4, the appropriate machine sends its software version
number. Again, the reply would be the decimal value of the INPUT and OUTPUT - the INPUT representing the number
in front of the decimal point, and the OUTPUT representing the number after it. For example, for version 3.5, the reply to
the request to send the version number would be (HEX codes):
7D
83
85
81 (i.e. 128dec+ 3dec for 2nd byte, 128dec+ 5dec for 3rd
byte).
If the OUTPUT is set as 1, then the ASCII coding of the lettering following the machine’s name is sent. For example, for
the VS-7588YC, the reply to the request to send the first suffix would be (HEX codes):
7D
D9
C3
81 (i.e. 128dec+ ASCII for “Y”; 128dec+ ASCII for “C”).
NOTE 14 - The number of inputs and outputs refers to the specific machine, which is being addressed, not to the
system. For example, if six 16X16 matrices are configured to make a 48X32 system (48 inputs, 32 outputs), the reply to
the HEX code
3E
82
81
82 (i.e. request the number of outputs)
would be HEX codes
7E
82
90
82
i.e. 16 outputs
NOTE 15 – When the OVR bit (4th byte) is set, then the “video” commands have universal meaning. For example,
instruction 1 (SWITCH VIDEO) causes all units (including audio, data, etc.) to switch. Similarly, if a machine is in
“FOLLOW” mode, it performs any “video” instruction.
NOTE 16 - The reply to the “REQUEST WHETHER PANEL IS LOCKED” is as in NOTE 4 above, except that here the
OUTPUT is assigned with the value 0 if the panel is unlocked, or 1 if it is locked.
NOTE 19 – When data (i.e. the INPUT and/or OUTPUT bytes) of more than 7 bits is required, this instruction is sent
before sending the instruction needing the additional bits. The data in this instruction then becomes the Most Significant
Bits of that next instruction. For example, to set the audio gain (instruction 22) of output 3 to 681dec (2A9hex), you
would first send HEX codes
3F
and then send HEX codes
16
80
85
81
83
A9
81
To set the audio gain of output 6 to 10013dec (271Dhex), first send HEX codes
3F
followed by HEX codes
16
80
CE
81
86
9D
81
NOTE 21 – Instruction 59 and instruction 60 load data for sending to the crosspoint switcher (or for storing in a SETUP),
i.e. the data is “lined-up” to be executed later. Instruction 58 executes the loaded data.
NOTE 22 – If the INPUT byte is set as 127dec, then the data stored in a SETUP is loaded. The SETUP # is in the
OUTPUT byte.
NOTE 23 – Further information needed in instructions 21, 22, 25 and 26, is sent using instruction 42 – which is sent
prior to the instruction. For example, to request the audio gain value of right input # 9, send hex codes
2A
and then send HEX codes
19
84
80
81
89
81
81
40
VP-1608 - Kramer Protocol 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2º‡ÍÏ•âÍØ]Ïâ„ÏÍ®∏ñº‡≥]Ï®º∏ͺ∏ͺı‡ÍÀ‡ºÄıuÏ„Í]∏ÄÍ]ÍØ®„ÏͺñÍ;‡]≥â‡ÍÄ®„χ®kıϺ‡„|Í
˚®„®Ïͺı‡ÍV âkÍ„®Ïâ͸•â‡âÍıÀÄ]Ïâ„ÍϺÍÏ•®„Íı„â‡Í≥]∏ı]ØÍ≥]˛ÍkâÍñºı∏Ä–Í
V â͸âØuº≥âͲºı‡Í’ıâ„Ï®º∏„|Íuº≥≥â∏Ï„|Í]∏ÄÍñââÄk]uÆ–Í
L 2,NXÍV K?5?3
+®„uº∏∏âuÏÍÏ•âÍı∏®ÏÍñ‡º≥ÍÏ•âÍÀº¸â‡
!
„ıÀÀØ˛Íkâñº‡âͺÀâ∏®∏ùÍ]∏ÄÍ„â‡˚®u®∏ù
2900- 001608
5
P/N:
Rev:
Download from Www.Somanuals.com. All Manuals Search And Download.
|